arm64: dts: allwinner: h6: Enable USB 3.0 host for Beelink GS1 and Tanix TX6

Enable USB 3.0 phy and host controller.

VBUS is directly connected to DCIN 5V and doesn't
require to be switched on.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index f335f7482a7313349edd0346036a4b3058c35ba5..b004e151222a8e7c0cde7be72507011707923cea 100644 (file)
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -76,6 +76,10 @@
        status = "okay";
 };
 
+&dwc3 {
+       status = "okay";
+};
+
 &ehci0 {
        status = "okay";
 };
@@ -292,3 +296,7 @@
        usb0_vbus-supply = <&reg_vcc5v>;
        status = "okay";
 };
+
+&usb3phy {
+       status = "okay";
+};

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
index bccfe1e65b6a029cd3e6b5f119e61e212b4cf255..0b6361a5c172716e5db653bad944ea50e4a80b11 100644 (file)
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-tanix-tx6.dts
@@ -45,6 +45,10 @@
        status = "okay";
 };
 
+&dwc3 {
+       status = "okay";
+};
+
 &ehci0 {
        status = "okay";
 };
@@ -102,3 +106,7 @@
 &usb2phy {
        status = "okay";
 };
+
+&usb3phy {
+       status = "okay";
+};