powerpc: Use gas sections for arranging exception vectors
authorNicholas Piggin <npiggin@gmail.com>
Wed, 28 Sep 2016 01:31:48 +0000 (11:31 +1000)
committerMichael Ellerman <mpe@ellerman.id.au>
Tue, 4 Oct 2016 02:06:56 +0000 (13:06 +1100)
Use assembler sections of fixed size and location to arrange the 64-bit
Book3S exception vector code (64-bit Book3E also uses it in head_64.S
for 0x0..0x100).

This allows better flexibility in arranging exception code and hiding
unimportant details behind macros.

Gas sections can be a bit painful to use this way, mainly because the
assembler does not know where they will be finally linked. Taking
absolute addresses requires a bit of trickery for example, but it can
be hidden behind macros for the most part.

Generated code is mostly the same except locations, offsets, alignments.

The "+ 0x2" is only required for the trap number / kvm exit number,
which gets loaded as a constant into a register.

Previously, code also used + 0x2 for label names, but we changed to
using "H" to distinguish HV case for that. Remove the last vestiges
of that.

__after_prom_start is taking absolute address of a label in another
fixed section. Newer toolchains seemed to compile this okay, but older
ones do not. FIXED_SYMBOL_ABS_ADDR is more foolproof, it just takes an
additional line to define.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
arch/powerpc/include/asm/exception-64s.h
arch/powerpc/include/asm/head-64.h
arch/powerpc/kernel/exceptions-64s.S
arch/powerpc/kernel/head_64.S
arch/powerpc/kernel/vmlinux.lds.S

index 72f2b1e3f343423e813b3392944139659635210d..2e4e7d878c8eeda322d701cb3f407d67ecff0a58 100644 (file)
@@ -91,7 +91,7 @@
  */
 #define LOAD_HANDLER(reg, label)                                       \
        ld      reg,PACAKBASE(r13);     /* get high part of &label */   \
-       ori     reg,reg,((label)-_stext)@l;     /* virt addr of handler ... */
+       ori     reg,reg,(FIXED_SYMBOL_ABS_ADDR(label))@l;
 
 /* Exception register prefixes */
 #define EXC_HV H
index 613f743e91aae1641ffe9acb862d3d8447d587b7..ab90c2fa1ea63215fc969105dc6e8071646ace02 100644 (file)
 
 #include <asm/cache.h>
 
+/*
+ * We can't do CPP stringification and concatination directly into the section
+ * name for some reason, so these macros can do it for us.
+ */
+.macro define_ftsec name
+       .section ".head.text.\name\()","ax",@progbits
+.endm
+.macro define_data_ftsec name
+       .section ".head.data.\name\()","a",@progbits
+.endm
+.macro use_ftsec name
+       .section ".head.text.\name\()"
+.endm
+
+/*
+ * Fixed (location) sections are used by opening fixed sections and emitting
+ * fixed section entries into them before closing them. Multiple fixed sections
+ * can be open at any time.
+ *
+ * Each fixed section created in a .S file must have corresponding linkage
+ * directives including location, added to  arch/powerpc/kernel/vmlinux.lds.S
+ *
+ * For each fixed section, code is generated into it in the order which it
+ * appears in the source.  Fixed section entries can be placed at a fixed
+ * location within the section using _LOCATION postifx variants. These must
+ * be ordered according to their relative placements within the section.
+ *
+ * OPEN_FIXED_SECTION(section_name, start_address, end_address)
+ * FIXED_SECTION_ENTRY_BEGIN(section_name, label1)
+ *
+ * USE_FIXED_SECTION(section_name)
+ * label3:
+ *     li  r10,128
+ *     mv  r11,r10
+
+ * FIXED_SECTION_ENTRY_BEGIN_LOCATION(section_name, label2, start_address)
+ * FIXED_SECTION_ENTRY_END_LOCATION(section_name, label2, end_address)
+ * CLOSE_FIXED_SECTION(section_name)
+ *
+ * ZERO_FIXED_SECTION can be used to emit zeroed data.
+ *
+ * Troubleshooting:
+ * - If the build dies with "Error: attempt to move .org backwards" at
+ *   CLOSE_FIXED_SECTION() or elsewhere, there may be something
+ *   unexpected being added there. Remove the '. = x_len' line, rebuild, and
+ *   check what is pushing the section down.
+ * - If the build dies in linking, check arch/powerpc/kernel/vmlinux.lds.S
+ *   for instructions.
+ * - If the kernel crashes or hangs in very early boot, it could be linker
+ *   stubs at the start of the main text.
+ */
+
+#define OPEN_FIXED_SECTION(sname, start, end)                  \
+       sname##_start = (start);                                \
+       sname##_end = (end);                                    \
+       sname##_len = (end) - (start);                          \
+       define_ftsec sname;                                     \
+       . = 0x0;                                                \
+start_##sname:
+
+#define OPEN_TEXT_SECTION(start)                               \
+       text_start = (start);                                   \
+       .section ".text","ax",@progbits;                        \
+       . = 0x0;                                                \
+start_text:
+
+#define ZERO_FIXED_SECTION(sname, start, end)                  \
+       sname##_start = (start);                                \
+       sname##_end = (end);                                    \
+       sname##_len = (end) - (start);                          \
+       define_data_ftsec sname;                                \
+       . = 0x0;                                                \
+       . = sname##_len;
+
+#define USE_FIXED_SECTION(sname)                               \
+       fs_label = start_##sname;                               \
+       fs_start = sname##_start;                               \
+       use_ftsec sname;
+
+#define USE_TEXT_SECTION()                                     \
+       fs_label = start_text;                                  \
+       fs_start = text_start;                                  \
+       .text
+
+#define CLOSE_FIXED_SECTION(sname)                             \
+       USE_FIXED_SECTION(sname);                               \
+       . = sname##_len;                                        \
+end_##sname:
+
+
+#define __FIXED_SECTION_ENTRY_BEGIN(sname, name, __align)      \
+       USE_FIXED_SECTION(sname);                               \
+       .align __align;                                         \
+       .global name;                                           \
+name:
+
+#define FIXED_SECTION_ENTRY_BEGIN(sname, name)                 \
+       __FIXED_SECTION_ENTRY_BEGIN(sname, name, 0)
+
+#define FIXED_SECTION_ENTRY_BEGIN_LOCATION(sname, name, start)         \
+       USE_FIXED_SECTION(sname);                               \
+       name##_start = (start);                                 \
+       .if (start) < sname##_start;                            \
+       .error "Fixed section underflow";                       \
+       .abort;                                                 \
+       .endif;                                                 \
+       . = (start) - sname##_start;                            \
+       .global name;                                           \
+name:
+
+#define FIXED_SECTION_ENTRY_END_LOCATION(sname, name, end)             \
+       .if (end) > sname##_end;                                \
+       .error "Fixed section overflow";                        \
+       .abort;                                                 \
+       .endif;                                                 \
+       .if (. - name > end - name##_start);                    \
+       .error "Fixed entry overflow";                          \
+       .abort;                                                 \
+       .endif;                                                 \
+       . = ((end) - sname##_start);                            \
+
+
+/*
+ * These macros are used to change symbols in other fixed sections to be
+ * absolute or related to our current fixed section.
+ *
+ * - DEFINE_FIXED_SYMBOL / FIXED_SYMBOL_ABS_ADDR is used to find the
+ *   absolute address of a symbol within a fixed section, from any section.
+ *
+ * - ABS_ADDR is used to find the absolute address of any symbol, from within
+ *   a fixed section.
+ */
+#define DEFINE_FIXED_SYMBOL(label)                             \
+       label##_absolute = (label - fs_label + fs_start)
+
+#define FIXED_SYMBOL_ABS_ADDR(label)                           \
+       (label##_absolute)
+
+#define ABS_ADDR(label) (label - fs_label + fs_start)
+
+/*
+ * Following are the BOOK3S exception handler helper macros.
+ * Handlers come in a number of types, and each type has a number of varieties.
+ *
+ * EXC_REAL_*        - real, unrelocated exception vectors
+ * EXC_VIRT_*        - virt (AIL), unrelocated exception vectors
+ * TRAMP_REAL_*   - real, unrelocated helpers (virt can call these)
+ * TRAMP_VIRT_*  - virt, unreloc helpers (in practice, real can use)
+ * TRAMP_KVM         - KVM handlers that get put into real, unrelocated
+ * EXC_COMMON_*  - virt, relocated common handlers
+ *
+ * The EXC handlers are given a name, and branch to name_common, or the
+ * appropriate KVM or masking function. Vector handler verieties are as
+ * follows:
+ *
+ * EXC_{REAL|VIRT}_BEGIN/END - used to open-code the exception
+ *
+ * EXC_{REAL|VIRT}  - standard exception
+ *
+ * EXC_{REAL|VIRT}_suffix
+ *     where _suffix is:
+ *   - _MASKABLE               - maskable exception
+ *   - _OOL                    - out of line with trampoline to common handler
+ *   - _HV                     - HV exception
+ *
+ * There can be combinations, e.g., EXC_VIRT_OOL_MASKABLE_HV
+ *
+ * The one unusual case is __EXC_REAL_OOL_HV_DIRECT, which is
+ * an OOL vector that branches to a specified handler rather than the usual
+ * trampoline that goes to common. It, and other underscore macros, should
+ * be used with care.
+ *
+ * KVM handlers come in the following verieties:
+ * TRAMP_KVM
+ * TRAMP_KVM_SKIP
+ * TRAMP_KVM_HV
+ * TRAMP_KVM_HV_SKIP
+ *
+ * COMMON handlers come in the following verieties:
+ * EXC_COMMON_BEGIN/END - used to open-code the handler
+ * EXC_COMMON
+ * EXC_COMMON_ASYNC
+ * EXC_COMMON_HV
+ *
+ * TRAMP_REAL and TRAMP_VIRT can be used with BEGIN/END. KVM
+ * and OOL handlers are implemented as types of TRAMP and TRAMP_VIRT handlers.
+ */
+
 #define EXC_REAL_BEGIN(name, start, end)                       \
-       . = start ;                                                     \
-       .global exc_real_##start##_##name ;                             \
-exc_real_##start##_##name:
+       FIXED_SECTION_ENTRY_BEGIN_LOCATION(real_vectors, exc_real_##start##_##name, start)
 
-#define EXC_REAL_END(name, start, end)
+#define EXC_REAL_END(name, start, end)                 \
+       FIXED_SECTION_ENTRY_END_LOCATION(real_vectors, exc_real_##start##_##name, end)
 
 #define EXC_VIRT_BEGIN(name, start, end)                       \
-       . = start ;                                                     \
-       .global exc_virt_##start##_##name ;                             \
-exc_virt_##start##_##name:
+       FIXED_SECTION_ENTRY_BEGIN_LOCATION(virt_vectors, exc_virt_##start##_##name, start)
 
-#define EXC_VIRT_END(name, start, end)
+#define EXC_VIRT_END(name, start, end)                 \
+       FIXED_SECTION_ENTRY_END_LOCATION(virt_vectors, exc_virt_##start##_##name, end)
 
 #define EXC_COMMON_BEGIN(name)                                 \
+       USE_TEXT_SECTION();                                             \
        .align  7;                                                      \
        .global name;                                                   \
+       DEFINE_FIXED_SYMBOL(name);                                      \
 name:
 
 #define TRAMP_REAL_BEGIN(name)                                 \
-       .global name ;                                                  \
-name:
+       FIXED_SECTION_ENTRY_BEGIN(real_trampolines, name)
+
+#define TRAMP_VIRT_BEGIN(name)                                 \
+       FIXED_SECTION_ENTRY_BEGIN(virt_trampolines, name)
 
 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
 #define TRAMP_KVM_BEGIN(name)                                          \
@@ -33,9 +223,13 @@ name:
 #define TRAMP_KVM_BEGIN(name)
 #endif
 
-#define EXC_REAL_NONE(start, end)
+#define EXC_REAL_NONE(start, end)                              \
+       FIXED_SECTION_ENTRY_BEGIN_LOCATION(real_vectors, exc_real_##start##_##unused, start); \
+       FIXED_SECTION_ENTRY_END_LOCATION(real_vectors, exc_real_##start##_##unused, end)
 
-#define EXC_VIRT_NONE(start, end)
+#define EXC_VIRT_NONE(start, end)                              \
+       FIXED_SECTION_ENTRY_BEGIN_LOCATION(virt_vectors, exc_virt_##start##_##unused, start); \
+       FIXED_SECTION_ENTRY_END_LOCATION(virt_vectors, exc_virt_##start##_##unused, end);
 
 
 #define EXC_REAL(name, start, end)                             \
@@ -77,6 +271,10 @@ name:
        TRAMP_REAL_BEGIN(tramp_real_##name);                            \
        STD_EXCEPTION_PSERIES_OOL(vec, name##_common);                  \
 
+#define EXC_REAL_OOL(name, start, end)                 \
+       __EXC_REAL_OOL(name, start, end);                       \
+       __TRAMP_REAL_REAL_OOL(name, start);
+
 #define __EXC_REAL_OOL_MASKABLE(name, start, end)              \
        __EXC_REAL_OOL(name, start, end);
 
@@ -84,6 +282,10 @@ name:
        TRAMP_REAL_BEGIN(tramp_real_##name);                            \
        MASKABLE_EXCEPTION_PSERIES_OOL(vec, name##_common);             \
 
+#define EXC_REAL_OOL_MASKABLE(name, start, end)                \
+       __EXC_REAL_OOL_MASKABLE(name, start, end);              \
+       __TRAMP_REAL_REAL_OOL_MASKABLE(name, start);
+
 #define __EXC_REAL_OOL_HV_DIRECT(name, start, end, handler)    \
        EXC_REAL_BEGIN(name, start, end);                       \
        __OOL_EXCEPTION(start, label, handler);                         \
@@ -96,6 +298,10 @@ name:
        TRAMP_REAL_BEGIN(tramp_real_##name);                            \
        STD_EXCEPTION_HV_OOL(vec, name##_common);                       \
 
+#define EXC_REAL_OOL_HV(name, start, end)                      \
+       __EXC_REAL_OOL_HV(name, start, end);                    \
+       __TRAMP_REAL_REAL_OOL_HV(name, start);
+
 #define __EXC_REAL_OOL_MASKABLE_HV(name, start, end)           \
        __EXC_REAL_OOL(name, start, end);
 
@@ -103,36 +309,56 @@ name:
        TRAMP_REAL_BEGIN(tramp_real_##name);                            \
        MASKABLE_EXCEPTION_HV_OOL(vec, name##_common);                  \
 
+#define EXC_REAL_OOL_MASKABLE_HV(name, start, end)             \
+       __EXC_REAL_OOL_MASKABLE_HV(name, start, end);   \
+       __TRAMP_REAL_REAL_OOL_MASKABLE_HV(name, start);
+
 #define __EXC_VIRT_OOL(name, start, end)                       \
        EXC_VIRT_BEGIN(name, start, end);                       \
        __OOL_EXCEPTION(start, label, tramp_virt_##name);               \
        EXC_VIRT_END(name, start, end);
 
 #define __TRAMP_REAL_VIRT_OOL(name, realvec)                           \
-       TRAMP_REAL_BEGIN(tramp_virt_##name);                            \
+       TRAMP_VIRT_BEGIN(tramp_virt_##name);                    \
        STD_RELON_EXCEPTION_PSERIES_OOL(realvec, name##_common);        \
 
+#define EXC_VIRT_OOL(name, start, end, realvec)                \
+       __EXC_VIRT_OOL(name, start, end);                       \
+       __TRAMP_REAL_VIRT_OOL(name, realvec);
+
 #define __EXC_VIRT_OOL_MASKABLE(name, start, end)              \
        __EXC_VIRT_OOL(name, start, end);
 
 #define __TRAMP_REAL_VIRT_OOL_MASKABLE(name, realvec)          \
-       TRAMP_REAL_BEGIN(tramp_virt_##name);                            \
+       TRAMP_VIRT_BEGIN(tramp_virt_##name);                    \
        MASKABLE_RELON_EXCEPTION_PSERIES_OOL(realvec, name##_common);   \
 
+#define EXC_VIRT_OOL_MASKABLE(name, start, end, realvec)       \
+       __EXC_VIRT_OOL_MASKABLE(name, start, end);              \
+       __TRAMP_REAL_VIRT_OOL_MASKABLE(name, realvec);
+
 #define __EXC_VIRT_OOL_HV(name, start, end)                    \
        __EXC_VIRT_OOL(name, start, end);
 
 #define __TRAMP_REAL_VIRT_OOL_HV(name, realvec)                        \
-       TRAMP_REAL_BEGIN(tramp_virt_##name);                            \
+       TRAMP_VIRT_BEGIN(tramp_virt_##name);                    \
        STD_RELON_EXCEPTION_HV_OOL(realvec, name##_common);             \
 
+#define EXC_VIRT_OOL_HV(name, start, end, realvec)             \
+       __EXC_VIRT_OOL_HV(name, start, end);                    \
+       __TRAMP_REAL_VIRT_OOL_HV(name, realvec);
+
 #define __EXC_VIRT_OOL_MASKABLE_HV(name, start, end)           \
        __EXC_VIRT_OOL(name, start, end);
 
 #define __TRAMP_REAL_VIRT_OOL_MASKABLE_HV(name, realvec)               \
-       TRAMP_REAL_BEGIN(tramp_virt_##name);                            \
+       TRAMP_VIRT_BEGIN(tramp_virt_##name);                    \
        MASKABLE_RELON_EXCEPTION_HV_OOL(realvec, name##_common);        \
 
+#define EXC_VIRT_OOL_MASKABLE_HV(name, start, end, realvec)    \
+       __EXC_VIRT_OOL_MASKABLE_HV(name, start, end);   \
+       __TRAMP_REAL_VIRT_OOL_MASKABLE_HV(name, realvec);
+
 #define TRAMP_KVM(area, n)                                             \
        TRAMP_KVM_BEGIN(do_kvm_##n);                                    \
        KVM_HANDLER(area, EXC_STD, n);                                  \
@@ -141,6 +367,9 @@ name:
        TRAMP_KVM_BEGIN(do_kvm_##n);                                    \
        KVM_HANDLER_SKIP(area, EXC_STD, n);                             \
 
+/*
+ * HV variant exceptions get the 0x2 bit added to their trap number.
+ */
 #define TRAMP_KVM_HV(area, n)                                          \
        TRAMP_KVM_BEGIN(do_kvm_H##n);                                   \
        KVM_HANDLER(area, EXC_HV, n + 0x2);                             \
index d398e8716ef893056e2adf6e6f7adef4864af64d..6ea330a3c51a7045445152f23e878bb92e800464 100644 (file)
 #include <asm/head-64.h>
 
 /*
+ * There are a few constraints to be concerned with.
+ * - Real mode exceptions code/data must be located at their physical location.
+ * - Virtual mode exceptions must be mapped at their 0xc000... location.
+ * - Fixed location code must not call directly beyond the __end_interrupts
+ *   area when built with CONFIG_RELOCATABLE. LOAD_HANDLER / bctr sequence
+ *   must be used.
+ * - LOAD_HANDLER targets must be within first 64K of physical 0 /
+ *   virtual 0xc00...
+ * - Conditional branch targets must be within +/-32K of caller.
+ *
+ * "Virtual exceptions" run with relocation on (MSR_IR=1, MSR_DR=1), and
+ * therefore don't have to run in physically located code or rfid to
+ * virtual mode kernel code. However on relocatable kernels they do have
+ * to branch to KERNELBASE offset because the rest of the kernel (outside
+ * the exception vectors) may be located elsewhere.
+ *
+ * Virtual exceptions correspond with physical, except their entry points
+ * are offset by 0xc000000000000000 and also tend to get an added 0x4000
+ * offset applied. Virtual exceptions are enabled with the Alternate
+ * Interrupt Location (AIL) bit set in the LPCR. However this does not
+ * guarantee they will be delivered virtually. Some conditions (see the ISA)
+ * cause exceptions to be delivered in real mode.
+ *
+ * It's impossible to receive interrupts below 0x300 via AIL.
+ *
+ * KVM: None of the virtual exceptions are from the guest. Anything that
+ * escalated to HV=1 from HV=0 is delivered via real mode handlers.
+ *
+ *
  * We layout physical memory as follows:
  * 0x0000 - 0x00ff : Secondary processor spin code
- * 0x0100 - 0x17ff : pSeries Interrupt prologs
- * 0x1800 - 0x4000 : interrupt support common interrupt prologs
- * 0x4000 - 0x5fff : pSeries interrupts with IR=1,DR=1
- * 0x6000 - 0x6fff : more interrupt support including for IR=1,DR=1
+ * 0x0100 - 0x18ff : Real mode pSeries interrupt vectors
+ * 0x1900 - 0x3fff : Real mode trampolines
+ * 0x4000 - 0x58ff : Relon (IR=1,DR=1) mode pSeries interrupt vectors
+ * 0x5900 - 0x6fff : Relon mode trampolines
  * 0x7000 - 0x7fff : FWNMI data area
- * 0x8000 - 0x8fff : Initial (CPU0) segment table
- * 0x9000 -        : Early init and support code
+ * 0x8000 -   .... : Common interrupt handlers, remaining early
+ *                   setup code, rest of kernel.
+ */
+OPEN_FIXED_SECTION(real_vectors,        0x0100, 0x1900)
+OPEN_FIXED_SECTION(real_trampolines,    0x1900, 0x4000)
+OPEN_FIXED_SECTION(virt_vectors,        0x4000, 0x5900)
+OPEN_FIXED_SECTION(virt_trampolines,    0x5900, 0x7000)
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
+/*
+ * Data area reserved for FWNMI option.
+ * This address (0x7000) is fixed by the RPA.
+ * pseries and powernv need to keep the whole page from
+ * 0x7000 to 0x8000 free for use by the firmware
  */
+ZERO_FIXED_SECTION(fwnmi_page,          0x7000, 0x8000)
+OPEN_TEXT_SECTION(0x8000)
+#else
+OPEN_TEXT_SECTION(0x7000)
+#endif
+
+USE_FIXED_SECTION(real_vectors)
+
+#define LOAD_SYSCALL_HANDLER(reg)                              \
+       ld      reg,PACAKBASE(r13);                             \
+       ori     reg,reg,(ABS_ADDR(system_call_common))@l;
+
        /* Syscall routine is used twice, in reloc-off and reloc-on paths */
 #define SYSCALL_PSERIES_1                                      \
 BEGIN_FTR_SECTION                                              \
@@ -42,7 +94,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)                                \
 
 #define SYSCALL_PSERIES_2_RFID                                         \
        mfspr   r12,SPRN_SRR1 ;                                 \
-       LOAD_HANDLER(r10, system_call_common) ;                 \
+       LOAD_SYSCALL_HANDLER(r10) ;                             \
        mtspr   SPRN_SRR0,r10 ;                                 \
        ld      r10,PACAKMSR(r13) ;                             \
        mtspr   SPRN_SRR1,r10 ;                                 \
@@ -63,7 +115,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)                               \
         * is volatile across system calls.
         */
 #define SYSCALL_PSERIES_2_DIRECT                               \
-       LOAD_HANDLER(r12, system_call_common) ;                 \
+       LOAD_SYSCALL_HANDLER(r12) ;                             \
        mtctr   r12 ;                                           \
        mfspr   r12,SPRN_SRR1 ;                                 \
        li      r10,MSR_RI ;                                    \
@@ -86,7 +138,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)                               \
  * Therefore any relative branches in this section must only
  * branch to labels in this section.
  */
-       . = 0x100
        .globl __start_interrupts
 __start_interrupts:
 
@@ -200,9 +251,6 @@ EXC_REAL_BEGIN(instruction_access_slb, 0x480, 0x500)
 #endif
 EXC_REAL_END(instruction_access_slb, 0x480, 0x500)
 
-       /* We open code these as we can't have a ". = x" (even with
-        * x = "." within a feature section
-        */
 EXC_REAL_BEGIN(hardware_interrupt, 0x500, 0x600)
        .globl hardware_interrupt_hv;
 hardware_interrupt_hv:
@@ -306,7 +354,6 @@ __EXC_REAL_OOL_HV(h_facility_unavailable, 0xf80, 0xfa0)
 
 EXC_REAL_NONE(0xfa0, 0x1200)
 
-
 #ifdef CONFIG_CBE_RAS
 EXC_REAL_HV(cbe_system_error, 0x1200, 0x1300)
 
@@ -359,7 +406,6 @@ TRAMP_KVM_HV_SKIP(PACA_EXGEN, 0x1800)
 
 #else /* CONFIG_CBE_RAS */
 EXC_REAL_NONE(0x1800, 0x1900)
-       . = 0x1800
 #endif
 
 
@@ -606,7 +652,13 @@ masked_##_H##interrupt:                                    \
        GET_SCRATCH0(r13);                              \
        ##_H##rfid;                                     \
        b       .
-       
+
+/*
+ * Real mode exceptions actually use this too, but alternate
+ * instruction code patches (which end up in the common .text area)
+ * cannot reach these if they are put there.
+ */
+USE_FIXED_SECTION(virt_trampolines)
        MASKED_INTERRUPT()
        MASKED_INTERRUPT(H)
 
@@ -620,6 +672,7 @@ masked_##_H##interrupt:                                     \
  * in the generated frame has EE set to 1 or the exception
  * handler will not properly re-enable them.
  */
+USE_TEXT_SECTION()
 _GLOBAL(__replay_interrupt)
        /* We are going to jump to the exception common code which
         * will retrieve various register values from the PACA which
@@ -862,7 +915,7 @@ EXC_VIRT(altivec_assist, 0x5700, 0x5800, 0x1700)
 
 EXC_VIRT_NONE(0x5800, 0x5900)
 
-TRAMP_REAL_BEGIN(ppc64_runlatch_on_trampoline)
+EXC_COMMON_BEGIN(ppc64_runlatch_on_trampoline)
        b       __ppc64_runlatch_on
 
 /*
@@ -1070,6 +1123,7 @@ __TRAMP_REAL_VIRT_OOL(vsx_unavailable, 0xf40)
 __TRAMP_REAL_VIRT_OOL(facility_unavailable, 0xf60)
 __TRAMP_REAL_VIRT_OOL_HV(h_facility_unavailable, 0xf80)
 
+USE_FIXED_SECTION(virt_trampolines)
        /*
         * The __end_interrupts marker must be past the out-of-line (OOL)
         * handlers, so that they are copied to real address 0x100 when running
@@ -1080,21 +1134,7 @@ __TRAMP_REAL_VIRT_OOL_HV(h_facility_unavailable, 0xf80)
        .align  7
        .globl  __end_interrupts
 __end_interrupts:
-
-#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
-/*
- * Data area reserved for FWNMI option.
- * This address (0x7000) is fixed by the RPA.
- */
-       .= 0x7000
-       .globl fwnmi_data_area
-fwnmi_data_area:
-
-       /* pseries and powernv need to keep the whole page from
-        * 0x7000 to 0x8000 free for use by the firmware
-        */
-       . = 0x8000
-#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
+DEFINE_FIXED_SYMBOL(__end_interrupts)
 
 EXC_COMMON(facility_unavailable_common, 0xf60, facility_unavailable_exception)
 EXC_COMMON(h_facility_unavailable_common, 0xf80, facility_unavailable_exception)
@@ -1106,7 +1146,7 @@ EXC_COMMON(cbe_thermal_common, 0x1800, cbe_thermal_exception)
 #endif /* CONFIG_CBE_RAS */
 
 
-EXC_COMMON_BEGIN(hmi_exception_early)
+TRAMP_REAL_BEGIN(hmi_exception_early)
        EXCEPTION_PROLOG_1(PACA_EXGEN, KVMTEST_HV, 0xe60)
        mr      r10,r1                  /* Save r1                      */
        ld      r1,PACAEMERGSP(r13)     /* Use emergency stack          */
@@ -1430,6 +1470,13 @@ TRAMP_REAL_BEGIN(power4_fixup_nap)
        blr
 #endif
 
+CLOSE_FIXED_SECTION(real_vectors);
+CLOSE_FIXED_SECTION(real_trampolines);
+CLOSE_FIXED_SECTION(virt_vectors);
+CLOSE_FIXED_SECTION(virt_trampolines);
+
+USE_TEXT_SECTION()
+
 /*
  * Hash table stuff
  */
index 6e21812ee67232c2426e0e6df6b2d6b5d7524568..79da0641bae24e5e9439df2a666f989b975a3896 100644 (file)
@@ -28,6 +28,7 @@
 #include <asm/page.h>
 #include <asm/mmu.h>
 #include <asm/ppc_asm.h>
+#include <asm/head-64.h>
 #include <asm/asm-offsets.h>
 #include <asm/bug.h>
 #include <asm/cputable.h>
  *   2. The kernel is entered at __start
  */
 
-       .text
-       .globl  _stext
-_stext:
+OPEN_FIXED_SECTION(first_256B, 0x0, 0x100)
+USE_FIXED_SECTION(first_256B)
+       /*
+        * Offsets are relative from the start of fixed section, and
+        * first_256B starts at 0. Offsets are a bit easier to use here
+        * than the fixed section entry macros.
+        */
+       . = 0x0
 _GLOBAL(__start)
        /* NOP this out unconditionally */
 BEGIN_FTR_SECTION
@@ -104,6 +110,7 @@ __secondary_hold_acknowledge:
        . = 0x5c
        .globl  __run_at_load
 __run_at_load:
+DEFINE_FIXED_SYMBOL(__run_at_load)
        .long   0x72756e30      /* "run0" -- relocate to 0 by default */
 #endif
 
@@ -133,7 +140,7 @@ __secondary_hold:
        /* Tell the master cpu we're here */
        /* Relocation is off & we are located at an address less */
        /* than 0x100, so only need to grab low order offset.    */
-       std     r24,__secondary_hold_acknowledge-_stext(0)
+       std     r24,(ABS_ADDR(__secondary_hold_acknowledge))(0)
        sync
 
        li      r26,0
@@ -141,7 +148,7 @@ __secondary_hold:
        tovirt(r26,r26)
 #endif
        /* All secondary cpus wait here until told to start. */
-100:   ld      r12,__secondary_hold_spinloop-_stext(r26)
+100:   ld      r12,(ABS_ADDR(__secondary_hold_spinloop))(r26)
        cmpdi   0,r12,0
        beq     100b
 
@@ -166,12 +173,13 @@ __secondary_hold:
 #else
        BUG_OPCODE
 #endif
+CLOSE_FIXED_SECTION(first_256B)
 
 /* This value is used to mark exception frames on the stack. */
        .section ".toc","aw"
 exception_marker:
        .tc     ID_72656773_68657265[TC],0x7265677368657265
-       .text
+       .previous
 
 /*
  * On server, we include the exception vectors code here as it
@@ -180,8 +188,12 @@ exception_marker:
  */
 #ifdef CONFIG_PPC_BOOK3S
 #include "exceptions-64s.S"
+#else
+OPEN_TEXT_SECTION(0x100)
 #endif
 
+USE_TEXT_SECTION()
+
 #ifdef CONFIG_PPC_BOOK3E
 /*
  * The booting_thread_hwid holds the thread id we want to boot in cpu
@@ -558,7 +570,7 @@ __after_prom_start:
 #if defined(CONFIG_PPC_BOOK3E)
        tovirt(r26,r26)         /* on booke, we already run at PAGE_OFFSET */
 #endif
-       lwz     r7,__run_at_load-_stext(r26)
+       lwz     r7,(FIXED_SYMBOL_ABS_ADDR(__run_at_load))(r26)
 #if defined(CONFIG_PPC_BOOK3E)
        tophys(r26,r26)
 #endif
@@ -601,7 +613,7 @@ __after_prom_start:
 #if defined(CONFIG_PPC_BOOK3E)
        tovirt(r26,r26)         /* on booke, we already run at PAGE_OFFSET */
 #endif
-       lwz     r7,__run_at_load-_stext(r26)
+       lwz     r7,(FIXED_SYMBOL_ABS_ADDR(__run_at_load))(r26)
        cmplwi  cr0,r7,1
        bne     3f
 
@@ -611,19 +623,21 @@ __after_prom_start:
        sub     r5,r5,r11
 #else
        /* just copy interrupts */
-       LOAD_REG_IMMEDIATE(r5, __end_interrupts - _stext)
+       LOAD_REG_IMMEDIATE(r5, FIXED_SYMBOL_ABS_ADDR(__end_interrupts))
 #endif
        b       5f
 3:
 #endif
-       lis     r5,(copy_to_here - _stext)@ha
-       addi    r5,r5,(copy_to_here - _stext)@l /* # bytes of memory to copy */
+       /* # bytes of memory to copy */
+       lis     r5,(ABS_ADDR(copy_to_here))@ha
+       addi    r5,r5,(ABS_ADDR(copy_to_here))@l
 
        bl      copy_and_flush          /* copy the first n bytes        */
                                        /* this includes the code being  */
                                        /* executed here.                */
-       addis   r8,r3,(4f - _stext)@ha  /* Jump to the copy of this code */
-       addi    r12,r8,(4f - _stext)@l  /* that we just made */
+       /* Jump to the copy of this code that we just made */
+       addis   r8,r3,(ABS_ADDR(4f))@ha
+       addi    r12,r8,(ABS_ADDR(4f))@l
        mtctr   r12
        bctr
 
@@ -635,8 +649,8 @@ p_end: .llong _end - copy_to_here
         * Now copy the rest of the kernel up to _end, add
         * _end - copy_to_here to the copy limit and run again.
         */
-       addis   r8,r26,(p_end - _stext)@ha
-       ld      r8,(p_end - _stext)@l(r8)
+       addis   r8,r26,(ABS_ADDR(p_end))@ha
+       ld      r8,(ABS_ADDR(p_end))@l(r8)
        add     r5,r5,r8
 5:     bl      copy_and_flush          /* copy the rest */
 
index b59d75e194a54132e7c00440fa8bc6c74172258e..2d1cfafd1404a6e67189db7225bb494ddd21c777 100644 (file)
@@ -44,11 +44,58 @@ SECTIONS
  * Text, read only data and other permanent read-only sections
  */
 
-       /* Text and gots */
+       _text = .;
+       _stext = .;
+
+       /*
+        * Head text.
+        * This needs to be in its own output section to avoid ld placing
+        * branch trampoline stubs randomly throughout the fixed sections,
+        * which it will do (even if the branch comes from another section)
+        * in order to optimize stub generation.
+        */
+       .head.text : AT(ADDR(.head.text) - LOAD_OFFSET) {
+#ifdef CONFIG_PPC64
+               KEEP(*(.head.text.first_256B));
+#ifdef CONFIG_PPC_BOOK3E
+# define END_FIXED     0x100
+#else
+               KEEP(*(.head.text.real_vectors));
+               *(.head.text.real_trampolines);
+               KEEP(*(.head.text.virt_vectors));
+               *(.head.text.virt_trampolines);
+# if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
+               KEEP(*(.head.data.fwnmi_page));
+#  define END_FIXED    0x8000
+# else
+#  define END_FIXED    0x7000
+# endif
+#endif
+               ASSERT((. == END_FIXED), "vmlinux.lds.S: fixed section overflow error");
+#else /* !CONFIG_PPC64 */
+               HEAD_TEXT
+#endif
+       } :kernel
+
+       /*
+        * If the build dies here, it's likely code in head_64.S is referencing
+        * labels it can't reach, and the linker inserting stubs without the
+        * assembler's knowledge. To debug, remove the above assert and
+        * rebuild. Look for branch stubs in the fixed section region.
+        *
+        * Linker stub generation could be allowed in "trampoline"
+        * sections if absolutely necessary, but this would require
+        * some rework of the fixed sections. Before resorting to this,
+        * consider references that have sufficient addressing range,
+        * (e.g., hand coded trampolines) so the linker does not have
+        * to add stubs.
+        *
+        * Linker stubs at the top of the main text section are currently not
+        * detected, and will result in a crash at boot due to offsets being
+        * wrong.
+        */
        .text : AT(ADDR(.text) - LOAD_OFFSET) {
                ALIGN_FUNCTION();
-               HEAD_TEXT
-               _text = .;
                /* careful! __ftr_alt_* sections need to be close to .text */
                *(.text .fixup __ftr_alt_* .ref.text)
                SCHED_TEXT