ARM: DT: msm8660: Add sdcc nodes
authorStephen Boyd <sboyd@codeaurora.org>
Fri, 19 Sep 2014 23:50:50 +0000 (16:50 -0700)
committerKumar Gala <galak@codeaurora.org>
Mon, 22 Sep 2014 18:49:41 +0000 (13:49 -0500)
Add the sdcc nodes to support the SD card controller using pl180
mmci driver. We also add a temporary fixed regulator until the
regulator driver is mainlined.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
arch/arm/boot/dts/qcom-msm8660-surf.dts
arch/arm/boot/dts/qcom-msm8660.dtsi

index ff7c53f58a06c259034893e09c2889881c5e51be..e0883c376248073158153de3341b6bae038c58f9 100644 (file)
                                status = "ok";
                        };
                };
+
+               amba {
+                       /* eMMC */
+                       sdcc1: sdcc@12400000 {
+                               status = "okay";
+                       };
+
+                       /* External micro SD card */
+                       sdcc3: sdcc@12180000 {
+                               status = "okay";
+                       };
+               };
        };
 };
 
index a3fd26b8139fd8a5ba1b8a460054a61953b4f1c0..0affd6193f56c987c5a2806f40705fbddb92cab2 100644 (file)
@@ -2,6 +2,7 @@
 
 /include/ "skeleton.dtsi"
 
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8660.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
 
                                };
                        };
                };
+
+               /* Temporary fixed regulator */
+               vsdcc_fixed: vsdcc-regulator {
+                       compatible = "regulator-fixed";
+                       regulator-name = "SDCC Power";
+                       regulator-min-microvolt = <2700000>;
+                       regulator-max-microvolt = <2700000>;
+                       regulator-always-on;
+               };
+
+               amba {
+                       compatible = "arm,amba-bus";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges;
+                       sdcc1: sdcc@12400000 {
+                               status          = "disabled";
+                               compatible      = "arm,pl18x", "arm,primecell";
+                               arm,primecell-periphid = <0x00051180>;
+                               reg             = <0x12400000 0x8000>;
+                               interrupts      = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupt-names = "cmd_irq";
+                               clocks          = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+                               clock-names     = "mclk", "apb_pclk";
+                               bus-width       = <8>;
+                               max-frequency   = <48000000>;
+                               non-removable;
+                               cap-sd-highspeed;
+                               cap-mmc-highspeed;
+                               vmmc-supply = <&vsdcc_fixed>;
+                       };
+
+                       sdcc3: sdcc@12180000 {
+                               compatible      = "arm,pl18x", "arm,primecell";
+                               arm,primecell-periphid = <0x00051180>;
+                               status          = "disabled";
+                               reg             = <0x12180000 0x8000>;
+                               interrupts      = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupt-names = "cmd_irq";
+                               clocks          = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+                               clock-names     = "mclk", "apb_pclk";
+                               bus-width       = <4>;
+                               cap-sd-highspeed;
+                               cap-mmc-highspeed;
+                               max-frequency   = <48000000>;
+                               no-1-8-v;
+                               vmmc-supply = <&vsdcc_fixed>;
+                       };
+               };
        };
+
 };