u32 skb_len)
{
struct slave *tx_slave;
- /*
- * We don't need to disable softirq here, becase
+
+ /* We don't need to disable softirq here, becase
* tlb_choose_channel() is only called by bond_alb_xmit()
* which already has softirq disabled.
*/
spin_lock(&bond->mode_lock);
tx_slave = __tlb_choose_channel(bond, hash_index, skb_len);
spin_unlock(&bond->mode_lock);
+
return tx_slave;
}
netdev_err(bond->dev, "found a client with no channel in the client's hash table\n");
continue;
}
- /*update all clients using this src_ip, that are not assigned
+ /* update all clients using this src_ip, that are not assigned
* to the team's address (curr_active_slave) and have a known
* unicast mac address.
*/
return NULL;
if (arp->op_code == htons(ARPOP_REPLY)) {
- /* the arp must be sent on the selected
- * rx channel
- */
+ /* the arp must be sent on the selected rx channel */
tx_slave = rlb_choose_channel(skb, bond);
if (tx_slave)
ether_addr_copy(arp->mac_src, tx_slave->dev->dev_addr);
spin_unlock_bh(&bond->mode_lock);
}
-/* Caller must hold rx_hashtbl lock */
+/* Caller must hold mode_lock */
static void rlb_init_table_entry_dst(struct rlb_client_info *entry)
{
entry->used_next = RLB_NULL_INDEX;
bond_info->rx_hashtbl[ip_src_hash].src_first = ip_dst_hash;
}
-/* deletes all rx_hashtbl entries with arp->ip_src if their mac_src does
- * not match arp->mac_src */
+/* deletes all rx_hashtbl entries with arp->ip_src if their mac_src does
+ * not match arp->mac_src
+ */
static void rlb_purge_src_ip(struct bonding *bond, struct arp_pkt *arp)
{
struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
return 0;
}
- /* for rlb each slave must have a unique hw mac addresses so that */
- /* each slave will receive packets destined to a different mac */
+ /* for rlb each slave must have a unique hw mac addresses so that
+ * each slave will receive packets destined to a different mac
+ */
memcpy(s_addr.sa_data, addr, dev->addr_len);
s_addr.sa_family = dev->type;
if (dev_set_mac_address(dev, &s_addr)) {
return 0;
}
-/*
- * Swap MAC addresses between two slaves.
+/* Swap MAC addresses between two slaves.
*
* Called with RTNL held, and no other locks.
- *
*/
-
static void alb_swap_mac_addr(struct slave *slave1, struct slave *slave2)
{
u8 tmp_mac_addr[ETH_ALEN];
}
-/*
- * Send learning packets after MAC address swap.
+/* Send learning packets after MAC address swap.
*
* Called with RTNL and no other locks
*/
found_slave = bond_slave_has_mac(bond, slave->perm_hwaddr);
if (found_slave) {
- /* locking: needs RTNL and nothing else */
alb_swap_mac_addr(slave, found_slave);
alb_fasten_mac_swap(bond, slave, found_slave);
}
return 0;
/* Try setting slave mac to bond address and fall-through
- to code handling that situation below... */
+ * to code handling that situation below...
+ */
alb_set_slave_mac_addr(slave, bond->dev->dev_addr);
}
if (rlb_enabled) {
bond->alb_info.rlb_enabled = 1;
- /* initialize rlb */
res = rlb_initialize(bond);
if (res) {
tlb_deinitialize(bond);
}
static int bond_do_alb_xmit(struct sk_buff *skb, struct bonding *bond,
- struct slave *tx_slave)
+ struct slave *tx_slave)
{
struct alb_bond_info *bond_info = &(BOND_ALB_INFO(bond));
struct ethhdr *eth_data = eth_hdr(skb);
bond_info->tx_rebalance_counter = 0;
}
- /* handle rlb stuff */
if (bond_info->rlb_enabled) {
if (bond_info->primary_is_promisc &&
(++bond_info->rlb_promisc_timeout_counter >= RLB_PROMISC_TIMEOUT)) {
- /*
- * dev_set_promiscuity requires rtnl and
+ /* dev_set_promiscuity requires rtnl and
* nothing else. Avoid race with bond_close.
*/
rcu_read_unlock();
return 0;
}
-/*
- * Remove slave from tlb and rlb hash tables, and fix up MAC addresses
+/* Remove slave from tlb and rlb hash tables, and fix up MAC addresses
* if necessary.
*
* Caller must hold RTNL and no other locks
if (!swap_slave)
swap_slave = bond_slave_has_mac(bond, bond->dev->dev_addr);
- /*
- * Arrange for swap_slave and new_slave to temporarily be
+ /* Arrange for swap_slave and new_slave to temporarily be
* ignored so we can mess with their MAC addresses without
* fear of interference from transmit activity.
*/
dev_queue_xmit(skb);
}
-/*
- * In the following 2 functions, bond_vlan_rx_add_vid and bond_vlan_rx_kill_vid,
+/* In the following 2 functions, bond_vlan_rx_add_vid and bond_vlan_rx_kill_vid,
* We don't protect the slave list iteration with a lock because:
* a. This operation is performed in IOCTL context,
* b. The operation is protected by the RTNL semaphore in the 8021q code,
/*------------------------------- Link status -------------------------------*/
-/*
- * Set the carrier state for the master according to the state of its
+/* Set the carrier state for the master according to the state of its
* slaves. If any slaves are up, the master is up. In 802.3ad mode,
* do special 802.3ad magic.
*
return 0;
}
-/*
- * Get link speed and duplex from the slave's base driver
+/* Get link speed and duplex from the slave's base driver
* using ethtool. If for some reason the call fails or the
* values are invalid, set speed and duplex to -1,
* and return.
}
}
-/*
- * if <dev> supports MII link status reporting, check its link status.
+/* if <dev> supports MII link status reporting, check its link status.
*
* We either do MII/ETHTOOL ioctls, or check netif_carrier_ok(),
* depending upon the setting of the use_carrier parameter.
/* Ethtool can't be used, fallback to MII ioctls. */
ioctl = slave_ops->ndo_do_ioctl;
if (ioctl) {
- /* TODO: set pointer to correct ioctl on a per team member */
- /* bases to make this more efficient. that is, once */
- /* we determine the correct ioctl, we will always */
- /* call it and not the others for that team */
- /* member. */
-
- /*
- * We cannot assume that SIOCGMIIPHY will also read a
+ /* TODO: set pointer to correct ioctl on a per team member
+ * bases to make this more efficient. that is, once
+ * we determine the correct ioctl, we will always
+ * call it and not the others for that team
+ * member.
+ */
+
+ /* We cannot assume that SIOCGMIIPHY will also read a
* register; not all network drivers (e.g., e100)
* support that.
*/
}
}
- /*
- * If reporting, report that either there's no dev->do_ioctl,
+ /* If reporting, report that either there's no dev->do_ioctl,
* or both SIOCGMIIREG and get_link failed (meaning that we
* cannot report link status). If not reporting, pretend
* we're ok.
/*----------------------------- Multicast list ------------------------------*/
-/*
- * Push the promiscuity flag down to appropriate slaves
- */
+/* Push the promiscuity flag down to appropriate slaves */
static int bond_set_promiscuity(struct bonding *bond, int inc)
{
struct list_head *iter;
return err;
}
-/*
- * Push the allmulti flag down to all slaves
- */
+/* Push the allmulti flag down to all slaves */
static int bond_set_allmulti(struct bonding *bond, int inc)
{
struct list_head *iter;
return err;
}
-/*
- * Retrieve the list of registered multicast addresses for the bonding
+/* Retrieve the list of registered multicast addresses for the bonding
* device and retransmit an IGMP JOIN request to the current active
* slave.
*/
rtnl_unlock();
}
-/* Flush bond's hardware addresses from slave
- */
+/* Flush bond's hardware addresses from slave */
static void bond_hw_addr_flush(struct net_device *bond_dev,
struct net_device *slave_dev)
{
call_netdevice_notifiers(NETDEV_CHANGEADDR, bond_dev);
}
-/*
- * bond_do_fail_over_mac
+/* bond_do_fail_over_mac
*
* Perform special MAC address swapping for fail_over_mac settings
*
bond_set_dev_addr(bond->dev, new_active->dev);
break;
case BOND_FOM_FOLLOW:
- /*
- * if new_active && old_active, swap them
+ /* if new_active && old_active, swap them
* if just old_active, do nothing (going to no active slave)
* if just new_active, set new_active to bond's MAC
*/
/* resend IGMP joins since active slave has changed or
* all were sent on curr_active_slave.
* resend only if bond is brought up with the affected
- * bonding modes and the retransmission is enabled */
+ * bonding modes and the retransmission is enabled
+ */
if (netif_running(bond->dev) && (bond->params.resend_igmp > 0) &&
((bond_uses_primary(bond) && new_active) ||
BOND_MODE(bond) == BOND_MODE_ROUNDROBIN)) {
slave_dev->name);
}
- /*
- * Old ifenslave binaries are no longer supported. These can
+ /* Old ifenslave binaries are no longer supported. These can
* be identified with moderate accuracy by the state of the slave:
* the current ifenslave will set the interface down prior to
* enslaving it; the old ifenslave will not.
call_netdevice_notifiers(NETDEV_JOIN, slave_dev);
/* If this is the first slave, then we need to set the master's hardware
- * address to be the same as the slave's. */
+ * address to be the same as the slave's.
+ */
if (!bond_has_slaves(bond) &&
bond->dev->addr_assign_type == NET_ADDR_RANDOM)
bond_set_dev_addr(bond->dev, slave_dev);
new_slave->bond = bond;
new_slave->dev = slave_dev;
- /*
- * Set the new_slave's queue_id to be zero. Queue ID mapping
+ /* Set the new_slave's queue_id to be zero. Queue ID mapping
* is set via sysfs or module option if desired.
*/
new_slave->queue_id = 0;
goto err_free;
}
- /*
- * Save slave's original ("permanent") mac address for modes
+ /* Save slave's original ("permanent") mac address for modes
* that need it, and for restoring it upon release, and then
* set it to the master's address
*/
if (!bond->params.fail_over_mac ||
BOND_MODE(bond) != BOND_MODE_ACTIVEBACKUP) {
- /*
- * Set slave to master's mac address. The application already
+ /* Set slave to master's mac address. The application already
* set the master's mac address to that of the first slave
*/
memcpy(addr.sa_data, bond_dev->dev_addr, bond_dev->addr_len);
link_reporting = bond_check_dev_link(bond, slave_dev, 1);
if ((link_reporting == -1) && !bond->params.arp_interval) {
- /*
- * miimon is set but a bonded network driver
+ /* miimon is set but a bonded network driver
* does not support ETHTOOL/MII and
* arp_interval is not set. Note: if
* use_carrier is enabled, we will never go
return res;
}
-/*
- * Try to release the slave device <slave> from the bond device <master>
+/* Try to release the slave device <slave> from the bond device <master>
* It is legal to access curr_active_slave without a lock because all the function
* is RTNL-locked. If "all" is true it means that the function is being called
* while destroying a bond interface and all slaves are being released.
if (all) {
RCU_INIT_POINTER(bond->curr_active_slave, NULL);
} else if (oldcurrent == slave) {
- /*
- * Note that we hold RTNL over this sequence, so there
+ /* Note that we hold RTNL over this sequence, so there
* is no concern that another slave add/remove event
* will interfere.
*/
netdev_info(bond_dev, "last VLAN challenged slave %s left bond %s - VLAN blocking is removed\n",
slave_dev->name, bond_dev->name);
- /* must do this from outside any spinlocks */
vlan_vids_del_by_dev(slave_dev, bond_dev);
- /* If the mode uses primary, then this cases was handled above by
+ /* If the mode uses primary, then this case was handled above by
* bond_change_active_slave(..., NULL)
*/
if (!bond_uses_primary(bond)) {
bond_free_slave(slave);
- return 0; /* deletion OK */
+ return 0;
}
/* A wrapper used because of ndo_del_link */
return __bond_release_one(bond_dev, slave_dev, false);
}
-/*
-* First release a slave and then destroy the bond if no more slaves are left.
-* Must be under rtnl_lock when this function is called.
-*/
+/* First release a slave and then destroy the bond if no more slaves are left.
+ * Must be under rtnl_lock when this function is called.
+ */
static int bond_release_and_destroy(struct net_device *bond_dev,
struct net_device *slave_dev)
{
info->bond_mode = BOND_MODE(bond);
info->miimon = bond->params.miimon;
-
info->num_slaves = bond->slave_cnt;
return 0;
/*FALLTHRU*/
case BOND_LINK_FAIL:
if (link_state) {
- /*
- * recovered before downdelay expired
- */
+ /* recovered before downdelay expired */
slave->link = BOND_LINK_UP;
slave->last_link_up = jiffies;
netdev_info(bond->dev, "link status up again after %d ms for interface %s\n",
bond_set_carrier(bond);
}
-/*
- * bond_mii_monitor
+/* bond_mii_monitor
*
* Really a wrapper that splits the mii monitor into two phases: an
* inspection, then (if inspection indicates something needs to be done)
return ret;
}
-/*
- * We go to the (large) trouble of VLAN tagging ARP frames because
+/* We go to the (large) trouble of VLAN tagging ARP frames because
* switches in VLAN mode (especially if ports are configured as
* "native" to a VLAN) might not pass non-tagged frames.
*/
curr_active_slave = rcu_dereference(bond->curr_active_slave);
- /*
- * Backup slaves won't see the ARP reply, but do come through
+ /* Backup slaves won't see the ARP reply, but do come through
* here for each ARP probe (so we swap the sip/tip to validate
* the probe). In a "redundant switch, common router" type of
* configuration, the ARP probe will (hopefully) travel from
last_act + mod * delta_in_ticks + delta_in_ticks/2);
}
-/*
- * this function is called regularly to monitor each slave's link
+/* This function is called regularly to monitor each slave's link
* ensuring that traffic is being sent and received when arp monitoring
* is used in load-balancing mode. if the adapter has been dormant, then an
* arp is transmitted to generate traffic. see activebackup_arp_monitor for
msecs_to_jiffies(bond->params.arp_interval));
}
-/*
- * Called to inspect slaves for active-backup mode ARP monitor link state
+/* Called to inspect slaves for active-backup mode ARP monitor link state
* changes. Sets new_link in slaves to specify what action should take
* place for the slave. Returns 0 if no changes are found, >0 if changes
* to link states must be committed.
continue;
}
- /*
- * Give slaves 2*delta after being enslaved or made
+ /* Give slaves 2*delta after being enslaved or made
* active. This avoids bouncing, as the last receive
* times need a full ARP monitor cycle to be updated.
*/
if (bond_time_in_interval(bond, slave->last_link_up, 2))
continue;
- /*
- * Backup slave is down if:
+ /* Backup slave is down if:
* - No current_arp_slave AND
* - more than 3*delta since last receive AND
* - the bond has an IP address
commit++;
}
- /*
- * Active slave is down if:
+ /* Active slave is down if:
* - more than 2*delta since transmitting OR
* - (more than 2*delta since receive AND
* the bond has an IP address)
return commit;
}
-/*
- * Called to commit link state changes noted by inspection step of
+/* Called to commit link state changes noted by inspection step of
* active-backup mode ARP monitor.
*
* Called with RTNL hold.
bond_set_carrier(bond);
}
-/*
- * Send ARP probes for active-backup mode ARP monitor.
+/* Send ARP probes for active-backup mode ARP monitor.
*
* Called with rcu_read_lock held.
*/
/*-------------------------- netdev event handling --------------------------*/
-/*
- * Change device name
- */
+/* Change device name */
static int bond_event_changename(struct bonding *bond)
{
bond_remove_proc_entry(bond);
}
break;
case NETDEV_DOWN:
- /*
- * ... Or is it this?
- */
break;
case NETDEV_CHANGEMTU:
- /*
- * TODO: Should slaves be allowed to
+ /* TODO: Should slaves be allowed to
* independently alter their MTU? For
* an active-backup bond, slaves need
* not be the same type of device, so
return NOTIFY_DONE;
}
-/*
- * bond_netdev_event: handle netdev notifier chain events.
+/* bond_netdev_event: handle netdev notifier chain events.
*
* This function receives events for the netdev chain. The caller (an
* ioctl handler calling blocking_notifier_call_chain) holds the necessary
mii->phy_id = 0;
/* Fall Through */
case SIOCGMIIREG:
- /*
- * We do this again just in case we were called by SIOCGMIIREG
+ /* We do this again just in case we were called by SIOCGMIIREG
* instead of SIOCGMIIPHY.
*/
mii = if_mii(ifr);
return res;
default:
- /* Go on */
break;
}
struct list_head *iter;
struct slave *slave;
-
rcu_read_lock();
if (bond_uses_primary(bond)) {
slave = rcu_dereference(bond->curr_active_slave);
if (ret)
return ret;
- /*
- * Assign slave's neigh_cleanup to neighbour in case cleanup is called
+ /* Assign slave's neigh_cleanup to neighbour in case cleanup is called
* after the last slave has been detached. Assumes that all slaves
* utilize the same neigh_cleanup (true at this writing as only user
* is ipoib).
return parms.neigh_setup(n);
}
-/*
- * The bonding ndo_neigh_setup is called at init time beofre any
+/* The bonding ndo_neigh_setup is called at init time beofre any
* slave exists. So we must declare proxy setup function which will
* be used at run time to resolve the actual slave neigh param setup.
*
return 0;
}
-/*
- * Change the MTU of all of a master's slaves to match the master
- */
+/* Change the MTU of all of a master's slaves to match the master */
static int bond_change_mtu(struct net_device *bond_dev, int new_mtu)
{
struct bonding *bond = netdev_priv(bond_dev);
return res;
}
-/*
- * Change HW address
+/* Change HW address
*
* Note that many devices must be down to change the HW address, and
* downing the master releases all slaves. We can make bonds full of
return NETDEV_TX_OK;
}
-/*
- * in active-backup mode, we know that bond->curr_active_slave is always valid if
+/* In active-backup mode, we know that bond->curr_active_slave is always valid if
* the bond has a usable interface.
*/
static int bond_xmit_activebackup(struct sk_buff *skb, struct net_device *bond_dev)
/*------------------------- Device initialization ---------------------------*/
-/*
- * Lookup the slave that corresponds to a qid
- */
+/* Lookup the slave that corresponds to a qid */
static inline int bond_slave_override(struct bonding *bond,
struct sk_buff *skb)
{
static u16 bond_select_queue(struct net_device *dev, struct sk_buff *skb,
void *accel_priv, select_queue_fallback_t fallback)
{
- /*
- * This helper function exists to help dev_pick_tx get the correct
+ /* This helper function exists to help dev_pick_tx get the correct
* destination queue. Using a helper function skips a call to
* skb_tx_hash and will put the skbs in the queue we expect on their
* way down to the bonding driver.
*/
u16 txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : 0;
- /*
- * Save the original txq to restore before passing to the driver
- */
+ /* Save the original txq to restore before passing to the driver */
qdisc_skb_cb(skb)->slave_dev_queue_mapping = skb->queue_mapping;
if (unlikely(txq >= dev->real_num_tx_queues)) {
struct bonding *bond = netdev_priv(dev);
netdev_tx_t ret = NETDEV_TX_OK;
- /*
- * If we risk deadlock from transmitting this in the
+ /* If we risk deadlock from transmitting this in the
* netpoll path, tell netpoll to queue the frame for later tx
*/
if (unlikely(is_netpoll_tx_blocked(dev)))
bond_dev->priv_flags |= IFF_BONDING | IFF_UNICAST_FLT;
bond_dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | IFF_TX_SKB_SHARING);
- /* don't acquire bond device's netif_tx_lock when
- * transmitting */
+ /* don't acquire bond device's netif_tx_lock when transmitting */
bond_dev->features |= NETIF_F_LLTX;
/* By default, we declare the bond to be fully
bond_dev->features |= bond_dev->hw_features;
}
-/*
-* Destroy a bonding device.
-* Must be under rtnl_lock when this function is called.
-*/
+/* Destroy a bonding device.
+ * Must be under rtnl_lock when this function is called.
+ */
static void bond_uninit(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
const struct bond_opt_value *valptr;
int arp_all_targets_value;
- /*
- * Convert string parameters.
- */
+ /* Convert string parameters. */
if (mode) {
bond_opt_initstr(&newval, mode);
valptr = bond_opt_parse(bond_opt_get(BOND_OPT_MODE), &newval);
for (arp_ip_count = 0, i = 0;
(arp_ip_count < BOND_MAX_ARP_TARGETS) && arp_ip_target[i]; i++) {
- /* not complete check, but should be good enough to
- catch mistakes */
__be32 ip;
+
+ /* not a complete check, but good enough to catch mistakes */
if (!in4_pton(arp_ip_target[i], -1, (u8 *)&ip, -1, NULL) ||
!bond_is_ip_target_ok(ip)) {
pr_warn("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n",
dev->qdisc_tx_busylock = &bonding_tx_busylock_key;
}
-/*
- * Called from registration process
- */
+/* Called from registration process */
static int bond_init(struct net_device *bond_dev)
{
struct bonding *bond = netdev_priv(bond_dev);
unregister_pernet_subsys(&bond_net_ops);
#ifdef CONFIG_NET_POLL_CONTROLLER
- /*
- * Make sure we don't have an imbalance on our netpoll blocking
- */
+ /* Make sure we don't have an imbalance on our netpoll blocking */
WARN_ON(atomic_read(&netpoll_block_tx));
#endif
}
projects / linux-block.git / commitdiff