powerpc/eeh: Replace pci_dn with eeh_dev for EEH on pSeries
authorGavin Shan <shangw@linux.vnet.ibm.com>
Mon, 27 Feb 2012 20:04:09 +0000 (20:04 +0000)
committerBenjamin Herrenschmidt <benh@kernel.crashing.org>
Fri, 9 Mar 2012 00:39:48 +0000 (11:39 +1100)
The pci_dn has been replaced with eeh_dev. In order to comply with
the rule, the EEH platform implementation on pSeries should also
be adjusted for a little bit so that it will depend on eeh_dev instead
of pci_dn.

The patch replaces pci_dn with eeh_dev. The corresponding information
will be retrieved from eeh_dev instead of pci_dn.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
arch/powerpc/platforms/pseries/eeh_pseries.c

index 4ed06b24ba495718618ef519d55052f69a73e713..36a1af1d11400740c1f91039c499771b765f1a6d 100644 (file)
@@ -144,11 +144,11 @@ static int pseries_eeh_init(void)
 static int pseries_eeh_set_option(struct device_node *dn, int option)
 {
        int ret = 0;
-       struct pci_dn *pdn;
+       struct eeh_dev *edev;
        const u32 *reg;
        int config_addr;
 
-       pdn = PCI_DN(dn);
+       edev = of_node_to_eeh_dev(dn);
 
        /*
         * When we're enabling or disabling EEH functioality on
@@ -165,9 +165,9 @@ static int pseries_eeh_set_option(struct device_node *dn, int option)
 
        case EEH_OPT_THAW_MMIO:
        case EEH_OPT_THAW_DMA:
-               config_addr = pdn->eeh_config_addr;
-               if (pdn->eeh_pe_config_addr)
-                       config_addr = pdn->eeh_pe_config_addr;
+               config_addr = edev->config_addr;
+               if (edev->pe_config_addr)
+                       config_addr = edev->pe_config_addr;
                break;
 
        default:
@@ -177,8 +177,8 @@ static int pseries_eeh_set_option(struct device_node *dn, int option)
        }
 
        ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL,
-                       config_addr, BUID_HI(pdn->phb->buid),
-                       BUID_LO(pdn->phb->buid), option);
+                       config_addr, BUID_HI(edev->phb->buid),
+                       BUID_LO(edev->phb->buid), option);
 
        return ret;
 }
@@ -198,11 +198,11 @@ static int pseries_eeh_set_option(struct device_node *dn, int option)
  */
 static int pseries_eeh_get_pe_addr(struct device_node *dn)
 {
-       struct pci_dn *pdn;
+       struct eeh_dev *edev;
        int ret = 0;
        int rets[3];
 
-       pdn = PCI_DN(dn);
+       edev = of_node_to_eeh_dev(dn);
 
        if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) {
                /*
@@ -211,15 +211,15 @@ static int pseries_eeh_get_pe_addr(struct device_node *dn)
                 * meaningless.
                 */
                ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
-                               pdn->eeh_config_addr, BUID_HI(pdn->phb->buid),
-                               BUID_LO(pdn->phb->buid), 1);
+                               edev->config_addr, BUID_HI(edev->phb->buid),
+                               BUID_LO(edev->phb->buid), 1);
                if (ret || (rets[0] == 0))
                        return 0;
 
                /* Retrieve the associated PE config address */
                ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets,
-                               pdn->eeh_config_addr, BUID_HI(pdn->phb->buid),
-                               BUID_LO(pdn->phb->buid), 0);
+                               edev->config_addr, BUID_HI(edev->phb->buid),
+                               BUID_LO(edev->phb->buid), 0);
                if (ret) {
                        pr_warning("%s: Failed to get PE address for %s\n",
                                __func__, dn->full_name);
@@ -231,8 +231,8 @@ static int pseries_eeh_get_pe_addr(struct device_node *dn)
 
        if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
                ret = rtas_call(ibm_get_config_addr_info, 4, 2, rets,
-                               pdn->eeh_config_addr, BUID_HI(pdn->phb->buid),
-                               BUID_LO(pdn->phb->buid), 0);
+                               edev->config_addr, BUID_HI(edev->phb->buid),
+                               BUID_LO(edev->phb->buid), 0);
                if (ret) {
                        pr_warning("%s: Failed to get PE address for %s\n",
                                __func__, dn->full_name);
@@ -260,28 +260,28 @@ static int pseries_eeh_get_pe_addr(struct device_node *dn)
  */
 static int pseries_eeh_get_state(struct device_node *dn, int *state)
 {
-       struct pci_dn *pdn;
+       struct eeh_dev *edev;
        int config_addr;
        int ret;
        int rets[4];
        int result;
 
        /* Figure out PE config address if possible */
-       pdn = PCI_DN(dn);
-       config_addr = pdn->eeh_config_addr;
-       if (pdn->eeh_pe_config_addr)
-               config_addr = pdn->eeh_pe_config_addr;
+       edev = of_node_to_eeh_dev(dn);
+       config_addr = edev->config_addr;
+       if (edev->pe_config_addr)
+               config_addr = edev->pe_config_addr;
 
        if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) {
                ret = rtas_call(ibm_read_slot_reset_state2, 3, 4, rets,
-                               config_addr, BUID_HI(pdn->phb->buid),
-                               BUID_LO(pdn->phb->buid));
+                               config_addr, BUID_HI(edev->phb->buid),
+                               BUID_LO(edev->phb->buid));
        } else if (ibm_read_slot_reset_state != RTAS_UNKNOWN_SERVICE) {
                /* Fake PE unavailable info */
                rets[2] = 0;
                ret = rtas_call(ibm_read_slot_reset_state, 3, 3, rets,
-                               config_addr, BUID_HI(pdn->phb->buid),
-                               BUID_LO(pdn->phb->buid));
+                               config_addr, BUID_HI(edev->phb->buid),
+                               BUID_LO(edev->phb->buid));
        } else {
                return EEH_STATE_NOT_SUPPORT;
        }
@@ -340,27 +340,27 @@ static int pseries_eeh_get_state(struct device_node *dn, int *state)
  */
 static int pseries_eeh_reset(struct device_node *dn, int option)
 {
-       struct pci_dn *pdn;
+       struct eeh_dev *edev;
        int config_addr;
        int ret;
 
        /* Figure out PE address */
-       pdn = PCI_DN(dn);
-       config_addr = pdn->eeh_config_addr;
-       if (pdn->eeh_pe_config_addr)
-               config_addr = pdn->eeh_pe_config_addr;
+       edev = of_node_to_eeh_dev(dn);
+       config_addr = edev->config_addr;
+       if (edev->pe_config_addr)
+               config_addr = edev->pe_config_addr;
 
        /* Reset PE through RTAS call */
        ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
-                       config_addr, BUID_HI(pdn->phb->buid),
-                       BUID_LO(pdn->phb->buid), option);
+                       config_addr, BUID_HI(edev->phb->buid),
+                       BUID_LO(edev->phb->buid), option);
 
        /* If fundamental-reset not supported, try hot-reset */
        if (option == EEH_RESET_FUNDAMENTAL &&
            ret == -8) {
                ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL,
-                               config_addr, BUID_HI(pdn->phb->buid),
-                               BUID_LO(pdn->phb->buid), EEH_RESET_HOT);
+                               config_addr, BUID_HI(edev->phb->buid),
+                               BUID_LO(edev->phb->buid), EEH_RESET_HOT);
        }
 
        return ret;
@@ -437,22 +437,22 @@ static int pseries_eeh_wait_state(struct device_node *dn, int max_wait)
  */
 static int pseries_eeh_get_log(struct device_node *dn, int severity, char *drv_log, unsigned long len)
 {
-       struct pci_dn *pdn;
+       struct eeh_dev *edev;
        int config_addr;
        unsigned long flags;
        int ret;
 
-       pdn = PCI_DN(dn);
+       edev = of_node_to_eeh_dev(dn);
        spin_lock_irqsave(&slot_errbuf_lock, flags);
        memset(slot_errbuf, 0, eeh_error_buf_size);
 
        /* Figure out the PE address */
-       config_addr = pdn->eeh_config_addr;
-       if (pdn->eeh_pe_config_addr)
-               config_addr = pdn->eeh_pe_config_addr;
+       config_addr = edev->config_addr;
+       if (edev->pe_config_addr)
+               config_addr = edev->pe_config_addr;
 
        ret = rtas_call(ibm_slot_error_detail, 8, 1, NULL, config_addr,
-                       BUID_HI(pdn->phb->buid), BUID_LO(pdn->phb->buid),
+                       BUID_HI(edev->phb->buid), BUID_LO(edev->phb->buid),
                        virt_to_phys(drv_log), len,
                        virt_to_phys(slot_errbuf), eeh_error_buf_size,
                        severity);
@@ -473,25 +473,25 @@ static int pseries_eeh_get_log(struct device_node *dn, int severity, char *drv_l
  */
 static int pseries_eeh_configure_bridge(struct device_node *dn)
 {
-       struct pci_dn *pdn;
+       struct eeh_dev *edev;
        int config_addr;
        int ret;
 
        /* Figure out the PE address */
-       pdn = PCI_DN(dn);
-       config_addr = pdn->eeh_config_addr;
-       if (pdn->eeh_pe_config_addr)
-               config_addr = pdn->eeh_pe_config_addr;
+       edev = of_node_to_eeh_dev(dn);
+       config_addr = edev->config_addr;
+       if (edev->pe_config_addr)
+               config_addr = edev->pe_config_addr;
 
        /* Use new configure-pe function, if supported */
        if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) {
                ret = rtas_call(ibm_configure_pe, 3, 1, NULL,
-                               config_addr, BUID_HI(pdn->phb->buid),
-                               BUID_LO(pdn->phb->buid));
+                               config_addr, BUID_HI(edev->phb->buid),
+                               BUID_LO(edev->phb->buid));
        } else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) {
                ret = rtas_call(ibm_configure_bridge, 3, 1, NULL,
-                               config_addr, BUID_HI(pdn->phb->buid),
-                               BUID_LO(pdn->phb->buid));
+                               config_addr, BUID_HI(edev->phb->buid),
+                               BUID_LO(edev->phb->buid));
        } else {
                return -EFAULT;
        }