During our experiment with zswap, we sometimes observe swap IOs due to
occasional zswap store failures and writebacks-to-swap. These swapping
IOs prevent many users who cannot tolerate swapping from adopting zswap to
save memory and improve performance where possible.
This patch adds the option to disable this behavior entirely: do not
writeback to backing swapping device when a zswap store attempt fail, and
do not write pages in the zswap pool back to the backing swap device (both
when the pool is full, and when the new zswap shrinker is called).
This new behavior can be opted-in/out on a per-cgroup basis via a new
cgroup file. By default, writebacks to swap device is enabled, which is
the previous behavior. Initially, writeback is enabled for the root
cgroup, and a newly created cgroup will inherit the current setting of its
parent.
Note that this is subtly different from setting memory.swap.max to 0, as
it still allows for pages to be stored in the zswap pool (which itself
consumes swap space in its current form).
This patch should be applied on top of the zswap shrinker series:
https://lore.kernel.org/linux-mm/
20231130194023.
4102148-1-nphamcs@gmail.com/
as it also disables the zswap shrinker, a major source of zswap
writebacks.
For the most part, this feature is motivated by internal parties who
have already established their opinions regarding swapping - the
workloads that are highly sensitive to IO, and especially those who are
using servers with really slow disk performance (for instance, massive
but slow HDDs). For these folks, it's impossible to convince them to
even entertain zswap if swapping also comes as a packaged deal.
Writeback disabling is quite a useful feature in these situations - on
a mixed workloads deployment, they can disable writeback for the more
IO-sensitive workloads, and enable writeback for other background
workloads.
For instance, on a server with HDD, I allocate memories and populate
them with random values (so that zswap store will always fail), and
specify memory.high low enough to trigger reclaim. The time it takes
to allocate the memories and just read through it a couple of times
(doing silly things like computing the values' average etc.):
zswap.writeback disabled:
real 0m30.537s
user 0m23.687s
sys 0m6.637s
0 pages swapped in
0 pages swapped out
zswap.writeback enabled:
real 0m45.061s
user 0m24.310s
sys 0m8.892s
712686 pages swapped in
461093 pages swapped out
(the last two lines are from vmstat -s).
[nphamcs@gmail.com: add a comment about recurring zswap store failures leading to reclaim inefficiency]
Link: https://lkml.kernel.org/r/20231221005725.3446672-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20231207192406.3809579-1-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: David Heidelberg <david@ixit.cz>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
limit, it will refuse to take any more stores before existing
entries fault back in or are written out to disk.
+ memory.zswap.writeback
+ A read-write single value file. The default value is "1". The
+ initial value of the root cgroup is 1, and when a new cgroup is
+ created, it inherits the current value of its parent.
+
+ When this is set to 0, all swapping attempts to swapping devices
+ are disabled. This included both zswap writebacks, and swapping due
+ to zswap store failures. If the zswap store failures are recurring
+ (for e.g if the pages are incompressible), users can observe
+ reclaim inefficiency after disabling writeback (because the same
+ pages might be rejected again and again).
+
+ Note that this is subtly different from setting memory.swap.max to
+ 0, as it still allows for pages to be written to the zswap pool.
+
memory.pressure
A read-only nested-keyed file.
Setting this parameter to 100 will disable the hysteresis.
+Some users cannot tolerate the swapping that comes with zswap store failures
+and zswap writebacks. Swapping can be disabled entirely (without disabling
+zswap itself) on a cgroup-basis as follows:
+
+ echo 0 > /sys/fs/cgroup/<cgroup-name>/memory.zswap.writeback
+
+Note that if the store failures are recurring (for e.g if the pages are
+incompressible), users can observe reclaim inefficiency after disabling
+writeback (because the same pages might be rejected again and again).
+
When there is a sizable amount of cold memory residing in the zswap pool, it
can be advantageous to proactively write these cold pages to swap and reclaim
the memory for other use cases. By default, the zswap shrinker is disabled.
#if defined(CONFIG_MEMCG_KMEM) && defined(CONFIG_ZSWAP)
unsigned long zswap_max;
+
+ /*
+ * Prevent pages from this memcg from being written back from zswap to
+ * swap, and from being swapped out on zswap store failures.
+ */
+ bool zswap_writeback;
#endif
unsigned long soft_limit;
bool obj_cgroup_may_zswap(struct obj_cgroup *objcg);
void obj_cgroup_charge_zswap(struct obj_cgroup *objcg, size_t size);
void obj_cgroup_uncharge_zswap(struct obj_cgroup *objcg, size_t size);
+bool mem_cgroup_zswap_writeback_enabled(struct mem_cgroup *memcg);
#else
static inline bool obj_cgroup_may_zswap(struct obj_cgroup *objcg)
{
size_t size)
{
}
+static inline bool mem_cgroup_zswap_writeback_enabled(struct mem_cgroup *memcg)
+{
+ /* if zswap is disabled, do not block pages going to the swapping device */
+ return true;
+}
#endif
#endif /* _LINUX_MEMCONTROL_H */
void zswap_memcg_offline_cleanup(struct mem_cgroup *memcg);
void zswap_lruvec_state_init(struct lruvec *lruvec);
void zswap_folio_swapin(struct folio *folio);
+bool is_zswap_enabled(void);
#else
struct zswap_lruvec_state {};
static inline void zswap_memcg_offline_cleanup(struct mem_cgroup *memcg) {}
static inline void zswap_lruvec_state_init(struct lruvec *lruvec) {}
static inline void zswap_folio_swapin(struct folio *folio) {}
+
+static inline bool is_zswap_enabled(void)
+{
+ return false;
+}
+
#endif
#endif /* _LINUX_ZSWAP_H */
WRITE_ONCE(memcg->soft_limit, PAGE_COUNTER_MAX);
#if defined(CONFIG_MEMCG_KMEM) && defined(CONFIG_ZSWAP)
memcg->zswap_max = PAGE_COUNTER_MAX;
+ WRITE_ONCE(memcg->zswap_writeback,
+ !parent || READ_ONCE(parent->zswap_writeback));
#endif
page_counter_set_high(&memcg->swap, PAGE_COUNTER_MAX);
if (parent) {
rcu_read_unlock();
}
+bool mem_cgroup_zswap_writeback_enabled(struct mem_cgroup *memcg)
+{
+ /* if zswap is disabled, do not block pages going to the swapping device */
+ return !is_zswap_enabled() || !memcg || READ_ONCE(memcg->zswap_writeback);
+}
+
static u64 zswap_current_read(struct cgroup_subsys_state *css,
struct cftype *cft)
{
return nbytes;
}
+static int zswap_writeback_show(struct seq_file *m, void *v)
+{
+ struct mem_cgroup *memcg = mem_cgroup_from_seq(m);
+
+ seq_printf(m, "%d\n", READ_ONCE(memcg->zswap_writeback));
+ return 0;
+}
+
+static ssize_t zswap_writeback_write(struct kernfs_open_file *of,
+ char *buf, size_t nbytes, loff_t off)
+{
+ struct mem_cgroup *memcg = mem_cgroup_from_css(of_css(of));
+ int zswap_writeback;
+ ssize_t parse_ret = kstrtoint(strstrip(buf), 0, &zswap_writeback);
+
+ if (parse_ret)
+ return parse_ret;
+
+ if (zswap_writeback != 0 && zswap_writeback != 1)
+ return -EINVAL;
+
+ WRITE_ONCE(memcg->zswap_writeback, zswap_writeback);
+ return nbytes;
+}
+
static struct cftype zswap_files[] = {
{
.name = "zswap.current",
.seq_show = zswap_max_show,
.write = zswap_max_write,
},
+ {
+ .name = "zswap.writeback",
+ .seq_show = zswap_writeback_show,
+ .write = zswap_writeback_write,
+ },
{ } /* terminate */
};
#endif /* CONFIG_MEMCG_KMEM && CONFIG_ZSWAP */
folio_end_writeback(folio);
return 0;
}
+ if (!mem_cgroup_zswap_writeback_enabled(folio_memcg(folio))) {
+ folio_mark_dirty(folio);
+ return AOP_WRITEPAGE_ACTIVATE;
+ }
+
__swap_writepage(folio, wbc);
return 0;
}
mutex_unlock(&shmem_swaplist_mutex);
BUG_ON(folio_mapped(folio));
- swap_writepage(&folio->page, wbc);
- return 0;
+ return swap_writepage(&folio->page, wbc);
}
mutex_unlock(&shmem_swaplist_mutex);
CONFIG_ZSWAP_SHRINKER_DEFAULT_ON);
module_param_named(shrinker_enabled, zswap_shrinker_enabled, bool, 0644);
+bool is_zswap_enabled(void)
+{
+ return zswap_enabled;
+}
+
/*********************************
* data structures
**********************************/
struct zswap_pool *pool = shrinker->private_data;
bool encountered_page_in_swapcache = false;
- if (!zswap_shrinker_enabled) {
+ if (!zswap_shrinker_enabled ||
+ !mem_cgroup_zswap_writeback_enabled(sc->memcg)) {
sc->nr_scanned = 0;
return SHRINK_STOP;
}
struct lruvec *lruvec = mem_cgroup_lruvec(memcg, NODE_DATA(sc->nid));
unsigned long nr_backing, nr_stored, nr_freeable, nr_protected;
- if (!zswap_shrinker_enabled)
+ if (!zswap_shrinker_enabled || !mem_cgroup_zswap_writeback_enabled(memcg))
return 0;
#ifdef CONFIG_MEMCG_KMEM
struct zswap_pool *pool;
int nid, shrunk = 0;
+ if (!mem_cgroup_zswap_writeback_enabled(memcg))
+ return -EINVAL;
+
/*
* Skip zombies because their LRUs are reparented and we would be
* reclaiming from the parent instead of the dead memcg.
projects / linux-2.6-block.git / commitdiff