net: micrel: Fix lan8841_config_intr after getting out of sleep mode

When the interrupt is enabled, the function lan8841_config_intr tries to
clear any pending interrupts by reading the interrupt status, then
checks the return value for errors and then continue to enable the
interrupt. It has been seen that once the system gets out of sleep mode,
the interrupt status has the value 0x400 meaning that the PHY detected
that the link was in low power. That is correct value but the problem is
that the check is wrong.  We try to check for errors but we return an
error also in this case which is not an error. Therefore fix this by
returning only when there is an error.

Fixes: a8f1a19d27ef ("net: micrel: Add support for lan8841 PHY")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20240524085350.359812-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 1d769322b05938ce6709cc8cd741222e4eff2b32..2b8f8b7f1517cc204c92a9b26b9800e681230fb2 100644 (file)
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -4029,7 +4029,7 @@ static int lan8841_config_intr(struct phy_device *phydev)
 
        if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
                err = phy_read(phydev, LAN8814_INTS);
-               if (err)
+               if (err < 0)
                        return err;
 
                /* Enable / disable interrupts. It is OK to enable PTP interrupt
@@ -4045,6 +4045,14 @@ static int lan8841_config_intr(struct phy_device *phydev)
                        return err;
 
                err = phy_read(phydev, LAN8814_INTS);
+               if (err < 0)
+                       return err;
+
+               /* Getting a positive value doesn't mean that is an error, it
+                * just indicates what was the status. Therefore make sure to
+                * clear the value and say that there is no error.
+                */
+               err = 0;
        }
 
        return err;