NET/e1000e: Fix powering off during shutdown
authorRafael J. Wysocki <rjw@sisk.pl>
Wed, 15 Apr 2009 17:43:43 +0000 (17:43 +0000)
committerDavid S. Miller <davem@davemloft.net>
Thu, 16 Apr 2009 09:15:22 +0000 (02:15 -0700)
Prevent e1000e from putting the adapter into D3 during shutdown except when
we're going to power off the system, since doing that may generally cause
problems with kexec to happen (such problems were observed for igb and
forcedeth).  For this purpose seperate e1000e_shutdown() from e1000e_suspend()
and use the appropriate PCI PM callbacks in both of them.

Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/e1000e/netdev.c

index 3b0f0877380026504978082e6b90dd373594c26a..1693ed116b16990f479c634e7a9e38c65b281131 100644 (file)
@@ -4346,7 +4346,7 @@ static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
        }
 }
 
-static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
 {
        struct net_device *netdev = pci_get_drvdata(pdev);
        struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -4409,20 +4409,16 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
 
                ew32(WUC, E1000_WUC_PME_EN);
                ew32(WUFC, wufc);
-               pci_enable_wake(pdev, PCI_D3hot, 1);
-               pci_enable_wake(pdev, PCI_D3cold, 1);
        } else {
                ew32(WUC, 0);
                ew32(WUFC, 0);
-               pci_enable_wake(pdev, PCI_D3hot, 0);
-               pci_enable_wake(pdev, PCI_D3cold, 0);
        }
 
+       *enable_wake = !!wufc;
+
        /* make sure adapter isn't asleep if manageability is enabled */
-       if (adapter->flags & FLAG_MNG_PT_ENABLED) {
-               pci_enable_wake(pdev, PCI_D3hot, 1);
-               pci_enable_wake(pdev, PCI_D3cold, 1);
-       }
+       if (adapter->flags & FLAG_MNG_PT_ENABLED)
+               *enable_wake = true;
 
        if (adapter->hw.phy.type == e1000_phy_igp_3)
                e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
@@ -4435,6 +4431,26 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
 
        pci_disable_device(pdev);
 
+       return 0;
+}
+
+static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake)
+{
+       if (sleep && wake) {
+               pci_prepare_to_sleep(pdev);
+               return;
+       }
+
+       pci_wake_from_d3(pdev, wake);
+       pci_set_power_state(pdev, PCI_D3hot);
+}
+
+static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
+                                    bool wake)
+{
+       struct net_device *netdev = pci_get_drvdata(pdev);
+       struct e1000_adapter *adapter = netdev_priv(netdev);
+
        /*
         * The pci-e switch on some quad port adapters will report a
         * correctable error when the MAC transitions from D0 to D3.  To
@@ -4450,14 +4466,12 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
                pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL,
                                      (devctl & ~PCI_EXP_DEVCTL_CERE));
 
-               pci_set_power_state(pdev, pci_choose_state(pdev, state));
+               e1000_power_off(pdev, sleep, wake);
 
                pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL, devctl);
        } else {
-               pci_set_power_state(pdev, pci_choose_state(pdev, state));
+               e1000_power_off(pdev, sleep, wake);
        }
-
-       return 0;
 }
 
 static void e1000e_disable_l1aspm(struct pci_dev *pdev)
@@ -4486,6 +4500,18 @@ static void e1000e_disable_l1aspm(struct pci_dev *pdev)
 }
 
 #ifdef CONFIG_PM
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+       int retval;
+       bool wake;
+
+       retval = __e1000_shutdown(pdev, &wake);
+       if (!retval)
+               e1000_complete_shutdown(pdev, true, wake);
+
+       return retval;
+}
+
 static int e1000_resume(struct pci_dev *pdev)
 {
        struct net_device *netdev = pci_get_drvdata(pdev);
@@ -4549,7 +4575,12 @@ static int e1000_resume(struct pci_dev *pdev)
 
 static void e1000_shutdown(struct pci_dev *pdev)
 {
-       e1000_suspend(pdev, PMSG_SUSPEND);
+       bool wake = false;
+
+       __e1000_shutdown(pdev, &wake);
+
+       if (system_state == SYSTEM_POWER_OFF)
+               e1000_complete_shutdown(pdev, false, wake);
 }
 
 #ifdef CONFIG_NET_POLL_CONTROLLER