spi/bfin_spi: support for multiples of 8bits with hardware CS
authorBob Liu <lliubbo@gmail.com>
Tue, 11 Jan 2011 16:19:07 +0000 (11:19 -0500)
committerGrant Likely <grant.likely@secretlab.ca>
Tue, 15 Feb 2011 20:56:58 +0000 (13:56 -0700)
We can do multiples of 8bit transfers when using the hardware CS and a
little bit of magic, so make it work.

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
drivers/spi/spi_bfin5xx.c

index 3f223511127b56c9a6800743991aea342e5e2e92..e8d68b79e98f33f4b17caaf813a97555e9e24ced 100644 (file)
@@ -425,6 +425,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id)
        struct bfin_spi_slave_data *chip = drv_data->cur_chip;
        struct spi_message *msg = drv_data->cur_msg;
        int n_bytes = drv_data->n_bytes;
+       int loop = 0;
 
        /* wait until transfer finished. */
        while (!(read_STAT(drv_data) & BIT_STAT_RXS))
@@ -435,10 +436,15 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id)
                /* last read */
                if (drv_data->rx) {
                        dev_dbg(&drv_data->pdev->dev, "last read\n");
-                       if (n_bytes == 2)
-                               *(u16 *) (drv_data->rx) = read_RDBR(drv_data);
-                       else if (n_bytes == 1)
-                               *(u8 *) (drv_data->rx) = read_RDBR(drv_data);
+                       if (n_bytes % 2) {
+                               u16 *buf = (u16 *)drv_data->rx;
+                               for (loop = 0; loop < n_bytes / 2; loop++)
+                                       *buf++ = read_RDBR(drv_data);
+                       } else {
+                               u8 *buf = (u8 *)drv_data->rx;
+                               for (loop = 0; loop < n_bytes; loop++)
+                                       *buf++ = read_RDBR(drv_data);
+                       }
                        drv_data->rx += n_bytes;
                }
 
@@ -458,29 +464,53 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id)
        if (drv_data->rx && drv_data->tx) {
                /* duplex */
                dev_dbg(&drv_data->pdev->dev, "duplex: write_TDBR\n");
-               if (drv_data->n_bytes == 2) {
-                       *(u16 *) (drv_data->rx) = read_RDBR(drv_data);
-                       write_TDBR(drv_data, (*(u16 *) (drv_data->tx)));
-               } else if (drv_data->n_bytes == 1) {
-                       *(u8 *) (drv_data->rx) = read_RDBR(drv_data);
-                       write_TDBR(drv_data, (*(u8 *) (drv_data->tx)));
+               if (n_bytes % 2) {
+                       u16 *buf = (u16 *)drv_data->rx;
+                       u16 *buf2 = (u16 *)drv_data->tx;
+                       for (loop = 0; loop < n_bytes / 2; loop++) {
+                               *buf++ = read_RDBR(drv_data);
+                               write_TDBR(drv_data, *buf2++);
+                       }
+               } else {
+                       u8 *buf = (u8 *)drv_data->rx;
+                       u8 *buf2 = (u8 *)drv_data->tx;
+                       for (loop = 0; loop < n_bytes; loop++) {
+                               *buf++ = read_RDBR(drv_data);
+                               write_TDBR(drv_data, *buf2++);
+                       }
                }
        } else if (drv_data->rx) {
                /* read */
                dev_dbg(&drv_data->pdev->dev, "read: write_TDBR\n");
-               if (drv_data->n_bytes == 2)
-                       *(u16 *) (drv_data->rx) = read_RDBR(drv_data);
-               else if (drv_data->n_bytes == 1)
-                       *(u8 *) (drv_data->rx) = read_RDBR(drv_data);
-               write_TDBR(drv_data, chip->idle_tx_val);
+               if (n_bytes % 2) {
+                       u16 *buf = (u16 *)drv_data->rx;
+                       for (loop = 0; loop < n_bytes / 2; loop++) {
+                               *buf++ = read_RDBR(drv_data);
+                               write_TDBR(drv_data, chip->idle_tx_val);
+                       }
+               } else {
+                       u8 *buf = (u8 *)drv_data->rx;
+                       for (loop = 0; loop < n_bytes; loop++) {
+                               *buf++ = read_RDBR(drv_data);
+                               write_TDBR(drv_data, chip->idle_tx_val);
+                       }
+               }
        } else if (drv_data->tx) {
                /* write */
                dev_dbg(&drv_data->pdev->dev, "write: write_TDBR\n");
-               bfin_spi_dummy_read(drv_data);
-               if (drv_data->n_bytes == 2)
-                       write_TDBR(drv_data, (*(u16 *) (drv_data->tx)));
-               else if (drv_data->n_bytes == 1)
-                       write_TDBR(drv_data, (*(u8 *) (drv_data->tx)));
+               if (n_bytes % 2) {
+                       u16 *buf = (u16 *)drv_data->tx;
+                       for (loop = 0; loop < n_bytes / 2; loop++) {
+                               read_RDBR(drv_data);
+                               write_TDBR(drv_data, *buf++);
+                       }
+               } else {
+                       u8 *buf = (u8 *)drv_data->tx;
+                       for (loop = 0; loop < n_bytes; loop++) {
+                               read_RDBR(drv_data);
+                               write_TDBR(drv_data, *buf++);
+                       }
+               }
        }
 
        if (drv_data->tx)
@@ -651,16 +681,16 @@ static void bfin_spi_pump_transfers(unsigned long data)
 
        /* Bits per word setup */
        bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word;
-       if (bits_per_word == 8) {
-               drv_data->n_bytes = 1;
-               drv_data->len = transfer->len;
-               cr_width = 0;
-               drv_data->ops = &bfin_bfin_spi_transfer_ops_u8;
-       } else if (bits_per_word == 16) {
-               drv_data->n_bytes = 2;
+       if ((bits_per_word > 0) && (bits_per_word % 16 == 0)) {
+               drv_data->n_bytes = bits_per_word/8;
                drv_data->len = (transfer->len) >> 1;
                cr_width = BIT_CTL_WORDSIZE;
                drv_data->ops = &bfin_bfin_spi_transfer_ops_u16;
+       } else if ((bits_per_word > 0) && (bits_per_word % 8 == 0)) {
+               drv_data->n_bytes = bits_per_word/8;
+               drv_data->len = transfer->len;
+               cr_width = 0;
+               drv_data->ops = &bfin_bfin_spi_transfer_ops_u8;
        } else {
                dev_err(&drv_data->pdev->dev, "transfer: unsupported bits_per_word\n");
                message->status = -EINVAL;
@@ -815,10 +845,19 @@ static void bfin_spi_pump_transfers(unsigned long data)
                if (drv_data->tx == NULL)
                        write_TDBR(drv_data, chip->idle_tx_val);
                else {
-                       if (bits_per_word == 8)
-                               write_TDBR(drv_data, (*(u8 *) (drv_data->tx)));
-                       else
-                               write_TDBR(drv_data, (*(u16 *) (drv_data->tx)));
+                       int loop;
+                       if (bits_per_word % 16 == 0) {
+                               u16 *buf = (u16 *)drv_data->tx;
+                               for (loop = 0; loop < bits_per_word / 16;
+                                               loop++) {
+                                       write_TDBR(drv_data, *buf++);
+                               }
+                       } else if (bits_per_word % 8 == 0) {
+                               u8 *buf = (u8 *)drv_data->tx;
+                               for (loop = 0; loop < bits_per_word / 8; loop++)
+                                       write_TDBR(drv_data, *buf++);
+                       }
+
                        drv_data->tx += drv_data->n_bytes;
                }
 
@@ -1031,7 +1070,7 @@ static int bfin_spi_setup(struct spi_device *spi)
                chip->ctl_reg &= bfin_ctl_reg;
        }
 
-       if (spi->bits_per_word != 8 && spi->bits_per_word != 16) {
+       if (spi->bits_per_word % 8) {
                dev_err(&spi->dev, "%d bits_per_word is not supported\n",
                                spi->bits_per_word);
                goto error;