regulator: 88pm800: Fix indentation of assignments of data structures
authorVaibhav Hiremath <vaibhav.hiremath@linaro.org>
Thu, 16 Jul 2015 18:16:54 +0000 (23:46 +0530)
committerMark Brown <broonie@kernel.org>
Thu, 16 Jul 2015 20:32:58 +0000 (21:32 +0100)
This patch makes code more clean from readability point of view,
make all assignments of LDO, BUCk and regulator_ops structure
at the same indentation.

Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
drivers/regulator/88pm800.c

index 832932bdc977d21e84f2f8f563ce8aa937c64bc1..11f7ab22ff8874d7a25d74af99202b776bbbf5e4 100644 (file)
@@ -95,11 +95,11 @@ struct pm800_regulators {
 #define PM800_BUCK(vreg, ereg, ebit, amax, volt_ranges, n_volt)                \
 {                                                                      \
        .desc   = {                                                     \
-               .name   = #vreg,                                        \
-               .ops    = &pm800_volt_range_ops,                        \
-               .type   = REGULATOR_VOLTAGE,                            \
-               .id     = PM800_ID_##vreg,                              \
-               .owner  = THIS_MODULE,                                  \
+               .name                   = #vreg,                        \
+               .ops                    = &pm800_volt_range_ops,        \
+               .type                   = REGULATOR_VOLTAGE,            \
+               .id                     = PM800_ID_##vreg,              \
+               .owner                  = THIS_MODULE,                  \
                .n_voltages             = n_volt,                       \
                .linear_ranges          = volt_ranges,                  \
                .n_linear_ranges        = ARRAY_SIZE(volt_ranges),      \
@@ -108,7 +108,7 @@ struct pm800_regulators {
                .enable_reg             = PM800_##ereg,                 \
                .enable_mask            = 1 << (ebit),                  \
        },                                                              \
-       .max_ua         = (amax),                                       \
+       .max_ua = (amax),                                               \
 }
 
 /*
@@ -123,19 +123,19 @@ struct pm800_regulators {
 #define PM800_LDO(vreg, ereg, ebit, amax, ldo_volt_table)              \
 {                                                                      \
        .desc   = {                                                     \
-               .name   = #vreg,                                        \
-               .ops    = &pm800_volt_table_ops,                        \
-               .type   = REGULATOR_VOLTAGE,                            \
-               .id     = PM800_ID_##vreg,                              \
-               .owner  = THIS_MODULE,                                  \
-               .n_voltages = ARRAY_SIZE(ldo_volt_table),               \
-               .vsel_reg       = PM800_##vreg##_VOUT,                  \
-               .vsel_mask      = 0x1f,                                 \
-               .enable_reg     = PM800_##ereg,                         \
-               .enable_mask    = 1 << (ebit),                          \
-               .volt_table     = ldo_volt_table,                       \
+               .name                   = #vreg,                        \
+               .ops                    = &pm800_volt_table_ops,        \
+               .type                   = REGULATOR_VOLTAGE,            \
+               .id                     = PM800_ID_##vreg,              \
+               .owner                  = THIS_MODULE,                  \
+               .n_voltages             = ARRAY_SIZE(ldo_volt_table),   \
+               .vsel_reg               = PM800_##vreg##_VOUT,          \
+               .vsel_mask              = 0x1f,                         \
+               .enable_reg             = PM800_##ereg,                 \
+               .enable_mask            = 1 << (ebit),                  \
+               .volt_table             = ldo_volt_table,               \
        },                                                              \
-       .max_ua         = (amax),                                       \
+       .max_ua = (amax),                                               \
 }
 
 /* Ranges are sorted in ascending order. */
@@ -178,25 +178,25 @@ static int pm800_get_current_limit(struct regulator_dev *rdev)
 }
 
 static struct regulator_ops pm800_volt_range_ops = {
-       .list_voltage = regulator_list_voltage_linear_range,
-       .map_voltage = regulator_map_voltage_linear_range,
-       .set_voltage_sel = regulator_set_voltage_sel_regmap,
-       .get_voltage_sel = regulator_get_voltage_sel_regmap,
-       .enable = regulator_enable_regmap,
-       .disable = regulator_disable_regmap,
-       .is_enabled = regulator_is_enabled_regmap,
-       .get_current_limit = pm800_get_current_limit,
+       .list_voltage           = regulator_list_voltage_linear_range,
+       .map_voltage            = regulator_map_voltage_linear_range,
+       .set_voltage_sel        = regulator_set_voltage_sel_regmap,
+       .get_voltage_sel        = regulator_get_voltage_sel_regmap,
+       .enable                 = regulator_enable_regmap,
+       .disable                = regulator_disable_regmap,
+       .is_enabled             = regulator_is_enabled_regmap,
+       .get_current_limit      = pm800_get_current_limit,
 };
 
 static struct regulator_ops pm800_volt_table_ops = {
-       .list_voltage = regulator_list_voltage_table,
-       .map_voltage = regulator_map_voltage_iterate,
-       .set_voltage_sel = regulator_set_voltage_sel_regmap,
-       .get_voltage_sel = regulator_get_voltage_sel_regmap,
-       .enable = regulator_enable_regmap,
-       .disable = regulator_disable_regmap,
-       .is_enabled = regulator_is_enabled_regmap,
-       .get_current_limit = pm800_get_current_limit,
+       .list_voltage           = regulator_list_voltage_table,
+       .map_voltage            = regulator_map_voltage_iterate,
+       .set_voltage_sel        = regulator_set_voltage_sel_regmap,
+       .get_voltage_sel        = regulator_get_voltage_sel_regmap,
+       .enable                 = regulator_enable_regmap,
+       .disable                = regulator_disable_regmap,
+       .is_enabled             = regulator_is_enabled_regmap,
+       .get_current_limit      = pm800_get_current_limit,
 };
 
 /* The array is indexed by id(PM800_ID_XXX) */