ARM: dts: bcm2835: Add the DSI module nodes and clocks.

The modules stay disabled by default, and if you want to enable DSI
you'll need an overlay that connects a panel to it.

Signed-off-by: Eric Anholt <eric@anholt.net>

diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 38e6050035bcdc1dd9efb1f88581a9f58f226bd1..1e4141914a6d76889dbe8608fa81bad13af3e890 100644 (file)
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -92,3 +92,11 @@
        power-domains = <&power RPI_POWER_DOMAIN_VEC>;
        status = "okay";
 };
+
+&dsi0 {
+       power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
+};
+
+&dsi1 {
+       power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
+};

diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index a3106aa446c6906108c90952cd39520ff195ef79..9798bc9293d8d2820f0622bb3fa6ef85118f4e3c 100644 (file)
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -93,10 +93,13 @@
                        #clock-cells = <1>;
                        reg = <0x7e101000 0x2000>;
 
-                       /* CPRMAN derives everything from the platform's
-                        * oscillator.
+                       /* CPRMAN derives almost everything from the
+                        * platform's oscillator.  However, the DSI
+                        * pixel clocks come from the DSI analog PHY.
                         */
-                       clocks = <&clk_osc>;
+                       clocks = <&clk_osc>,
+                               <&dsi0 0>, <&dsi0 1>, <&dsi0 2>,
+                               <&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
                };
 
                rng@7e104000 {
@@ -390,6 +393,25 @@
                        interrupts = <2 14>; /* pwa1 */
                };
 
+               dsi0: dsi@7e209000 {
+                       compatible = "brcm,bcm2835-dsi0";
+                       reg = <0x7e209000 0x78>;
+                       interrupts = <2 4>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       #clock-cells = <1>;
+
+                       clocks = <&clocks BCM2835_PLLA_DSI0>,
+                                <&clocks BCM2835_CLOCK_DSI0E>,
+                                <&clocks BCM2835_CLOCK_DSI0P>;
+                       clock-names = "phy", "escape", "pixel";
+
+                       clock-output-names = "dsi0_byte",
+                                            "dsi0_ddr2",
+                                            "dsi0_ddr";
+
+               };
+
                thermal: thermal@7e212000 {
                        compatible = "brcm,bcm2835-thermal";
                        reg = <0x7e212000 0x8>;
@@ -456,6 +478,26 @@
                        interrupts = <2 1>;
                };
 
+               dsi1: dsi@7e700000 {
+                       compatible = "brcm,bcm2835-dsi1";
+                       reg = <0x7e700000 0x8c>;
+                       interrupts = <2 12>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       #clock-cells = <1>;
+
+                       clocks = <&clocks BCM2835_PLLD_DSI1>,
+                                <&clocks BCM2835_CLOCK_DSI1E>,
+                                <&clocks BCM2835_CLOCK_DSI1P>;
+                       clock-names = "phy", "escape", "pixel";
+
+                       clock-output-names = "dsi1_byte",
+                                            "dsi1_ddr2",
+                                            "dsi1_ddr";
+
+                       status = "disabled";
+               };
+
                i2c1: i2c@7e804000 {
                        compatible = "brcm,bcm2835-i2c";
                        reg = <0x7e804000 0x1000>;