V4L/DVB (11880): cx23885: support for card Mygica X8506 DMB-TH
authorDavid Wong <davidtlwong@gmail.com>
Mon, 18 May 2009 08:25:49 +0000 (05:25 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Tue, 16 Jun 2009 21:21:15 +0000 (18:21 -0300)
This patch add cx23885 support for card "Mygica X8506 DMB-TH".
It should work on "Magic-Pro ProHDTV Extreme" as well, as they are
same hardware with different branding.

Sign-off-by: David T.L. Wong <davidtlwong@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Documentation/video4linux/CARDLIST.cx23885
drivers/media/video/cx23885/cx23885-cards.c
drivers/media/video/cx23885/cx23885-dvb.c
drivers/media/video/cx23885/cx23885.h

index 948e436108bc5dd30572df28ecf21eedefe794a5..450b8f8c389bcb5eba41cc21515795429f0c2b5c 100644 (file)
@@ -20,3 +20,4 @@
  19 -> Hauppauge WinTV-HVR1275                             [0070:2215]
  20 -> Hauppauge WinTV-HVR1255                             [0070:2251]
  21 -> Hauppauge WinTV-HVR1210                             [0070:2291,0070:2295]
+ 22 -> Mygica X8506 DMB-TH                                 [14f1:8651]
index 057ef36d5a63466cec8ca5fee9a12c918b294b0e..ce29b5e34a11329f58e5fca573205d8316876ff7 100644 (file)
@@ -197,6 +197,10 @@ struct cx23885_board cx23885_boards[] = {
                .name           = "Hauppauge WinTV-HVR1210",
                .portc          = CX23885_MPEG_DVB,
        },
+       [CX23885_BOARD_MYGICA_X8506] = {
+               .name           = "Mygica X8506 DMB-TH",
+               .portb          = CX23885_MPEG_DVB,
+       },
 };
 const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
 
@@ -316,6 +320,10 @@ struct cx23885_subid cx23885_subids[] = {
                .subvendor = 0x0070,
                .subdevice = 0x2295,
                .card      = CX23885_BOARD_HAUPPAUGE_HVR1210,
+       }, {
+               .subvendor = 0x14f1,
+               .subdevice = 0x8651,
+               .card      = CX23885_BOARD_MYGICA_X8506,
        },
 };
 const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -706,6 +714,15 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
                mdelay(20);
                cx23885_gpio_set(dev, GPIO_9);
                break;
+       case CX23885_BOARD_MYGICA_X8506:
+               /* GPIO-1 reset XC5000 */
+               /* GPIO-2 reset LGS8GL5 */
+               cx_set(GP0_IO, 0x00060000);
+               cx_clear(GP0_IO, 0x00000006);
+               mdelay(100);
+               cx_set(GP0_IO, 0x00060006);
+               mdelay(100);
+               break;
        }
 }
 
@@ -809,6 +826,11 @@ void cx23885_card_setup(struct cx23885_dev *dev)
                ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
                ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
                break;
+       case CX23885_BOARD_MYGICA_X8506:
+               ts1->gen_ctrl_val  = 0x5; /* Parallel */
+               ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+               ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+               break;
        case CX23885_BOARD_HAUPPAUGE_HVR1250:
        case CX23885_BOARD_HAUPPAUGE_HVR1500:
        case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
index 45784a384300f74ea1832f80fbc599917e040568..e236df23370ea52f350fcb7e52e50aead5a56191 100644 (file)
@@ -49,6 +49,7 @@
 #include "lnbh24.h"
 #include "cx24116.h"
 #include "cimax2.h"
+#include "lgs8gxx.h"
 #include "netup-eeprom.h"
 #include "netup-init.h"
 #include "lgdt3305.h"
@@ -420,10 +421,29 @@ static struct cx24116_config dvbworld_cx24116_config = {
        .demod_address = 0x05,
 };
 
+static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = {
+       .prod = LGS8GXX_PROD_LGS8GL5,
+       .demod_address = 0x19,
+       .serial_ts = 0,
+       .ts_clk_pol = 1,
+       .ts_clk_gated = 1,
+       .if_clk_freq = 30400, /* 30.4 MHz */
+       .if_freq = 5380, /* 5.38 MHz */
+       .if_neg_center = 1,
+       .ext_adc = 0,
+       .adc_signed = 0,
+       .if_neg_edge = 0,
+};
+
+static struct xc5000_config mygica_x8506_xc5000_config = {
+       .i2c_address = 0x61,
+       .if_khz = 5380,
+};
+
 static int dvb_register(struct cx23885_tsport *port)
 {
        struct cx23885_dev *dev = port->dev;
-       struct cx23885_i2c *i2c_bus = NULL;
+       struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL;
        struct videobuf_dvb_frontend *fe0;
        int ret;
 
@@ -745,6 +765,19 @@ static int dvb_register(struct cx23885_tsport *port)
                        break;
                }
                break;
+       case CX23885_BOARD_MYGICA_X8506:
+               i2c_bus = &dev->i2c_bus[0];
+               i2c_bus2 = &dev->i2c_bus[1];
+               fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
+                       &mygica_x8506_lgs8gl5_config,
+                       &i2c_bus->i2c_adap);
+               if (fe0->dvb.frontend != NULL) {
+                       dvb_attach(xc5000_attach,
+                               fe0->dvb.frontend,
+                               &i2c_bus2->i2c_adap,
+                               &mygica_x8506_xc5000_config);
+               }
+               break;
        default:
                printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
                        " isn't supported yet\n",
index 5067c19b6594f2fef01d8ef7090c513acf797a42..1a2ac518a3f1ae21362ae8694a4289d1d4c78cba 100644 (file)
@@ -75,6 +75,7 @@
 #define CX23885_BOARD_HAUPPAUGE_HVR1275        19
 #define CX23885_BOARD_HAUPPAUGE_HVR1255        20
 #define CX23885_BOARD_HAUPPAUGE_HVR1210        21
+#define CX23885_BOARD_MYGICA_X8506             22
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002