[SCSI] lpfc 8.1.12 : Add support for async scanning
authorJames Smart <James.Smart@Emulex.Com>
Wed, 25 Apr 2007 13:53:22 +0000 (09:53 -0400)
committerJames Bottomley <jejb@mulgrave.il.steeleye.com>
Sun, 6 May 2007 14:33:16 +0000 (09:33 -0500)
Add support for async scanning

Notes: This is the async scan patch to our driver from Matthew Wilcox.
  The async scan logic is still subject to errors in insmod/rmmod, as
  the async scan threads don't get shutdown when the module unloads
  underneath them. See http://marc.info/?l=linux-scsi&m=117551999925582&w=2

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
drivers/scsi/lpfc/lpfc_crtn.h
drivers/scsi/lpfc/lpfc_init.c
drivers/scsi/lpfc/lpfc_scsi.c

index 9f70b5bc0950e248858e9aefe73234a22ab0d38f..e4454bc377828f6f343f2869709f10589c32fbe6 100644 (file)
@@ -200,6 +200,9 @@ void lpfc_mbuf_free(struct lpfc_hba *, void *, dma_addr_t);
 
 /* Function prototypes. */
 const char* lpfc_info(struct Scsi_Host *);
+void lpfc_scan_start(struct Scsi_Host *);
+int lpfc_scan_finished(struct Scsi_Host *, unsigned long);
+
 void lpfc_get_cfgparam(struct lpfc_hba *);
 int lpfc_alloc_sysfs_attr(struct lpfc_hba *);
 void lpfc_free_sysfs_attr(struct lpfc_hba *);
index 5e9a839111d2be72b2c92e56a3611d75731c14ef..7cb92c7531ba71cd65a458858339da6511975bf5 100644 (file)
@@ -418,33 +418,6 @@ lpfc_config_port_post(struct lpfc_hba * phba)
        return (0);
 }
 
-static int
-lpfc_discovery_wait(struct lpfc_hba *phba)
-{
-       int i = 0;
-
-       while ((phba->hba_state != LPFC_HBA_READY) ||
-              (phba->num_disc_nodes) || (phba->fc_prli_sent) ||
-              ((phba->fc_map_cnt == 0) && (i<2)) ||
-              (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE)) {
-               /* Check every second for 30 retries. */
-               i++;
-               if (i > 30) {
-                       return -ETIMEDOUT;
-               }
-               if ((i >= 15) && (phba->hba_state <= LPFC_LINK_DOWN)) {
-                       /* The link is down.  Set linkdown timeout */
-                       return -ETIMEDOUT;
-               }
-
-               /* Delay for 1 second to give discovery time to complete. */
-               msleep(1000);
-
-       }
-
-       return 0;
-}
-
 /************************************************************************/
 /*                                                                      */
 /*    lpfc_hba_down_prep                                                */
@@ -1362,6 +1335,156 @@ lpfc_scsi_free(struct lpfc_hba * phba)
        return 0;
 }
 
+void lpfc_remove_device(struct lpfc_hba *phba)
+{
+       unsigned long iflag;
+
+       lpfc_free_sysfs_attr(phba);
+
+       spin_lock_irqsave(phba->host->host_lock, iflag);
+       phba->fc_flag |= FC_UNLOADING;
+
+       spin_unlock_irqrestore(phba->host->host_lock, iflag);
+
+       fc_remove_host(phba->host);
+       scsi_remove_host(phba->host);
+
+       kthread_stop(phba->worker_thread);
+
+       /*
+        * Bring down the SLI Layer. This step disable all interrupts,
+        * clears the rings, discards all mailbox commands, and resets
+        * the HBA.
+        */
+       lpfc_sli_hba_down(phba);
+       lpfc_sli_brdrestart(phba);
+
+       /* Release the irq reservation */
+       free_irq(phba->pcidev->irq, phba);
+       pci_disable_msi(phba->pcidev);
+
+       lpfc_cleanup(phba);
+       lpfc_stop_timer(phba);
+       phba->work_hba_events = 0;
+
+       /*
+        * Call scsi_free before mem_free since scsi bufs are released to their
+        * corresponding pools here.
+        */
+       lpfc_scsi_free(phba);
+       lpfc_mem_free(phba);
+
+       /* Free resources associated with SLI2 interface */
+       dma_free_coherent(&phba->pcidev->dev, SLI2_SLIM_SIZE,
+                         phba->slim2p, phba->slim2p_mapping);
+
+       /* unmap adapter SLIM and Control Registers */
+       iounmap(phba->ctrl_regs_memmap_p);
+       iounmap(phba->slim_memmap_p);
+
+       pci_release_regions(phba->pcidev);
+       pci_disable_device(phba->pcidev);
+
+       idr_remove(&lpfc_hba_index, phba->brd_no);
+       scsi_host_put(phba->host);
+}
+
+void lpfc_scan_start(struct Scsi_Host *host)
+{
+       struct lpfc_hba *phba = (struct lpfc_hba*)host->hostdata;
+
+       if (lpfc_alloc_sysfs_attr(phba))
+               goto error;
+
+       phba->MBslimaddr = phba->slim_memmap_p;
+       phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
+       phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
+       phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
+       phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
+
+       if (lpfc_sli_hba_setup(phba))
+               goto error;
+
+       /*
+        * hba setup may have changed the hba_queue_depth so we need to adjust
+        * the value of can_queue.
+        */
+       host->can_queue = phba->cfg_hba_queue_depth - 10;
+       return;
+
+error:
+       lpfc_remove_device(phba);
+}
+
+int lpfc_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+       struct lpfc_hba *phba = (struct lpfc_hba *)shost->hostdata;
+
+       if (!phba->host)
+               return 1;
+       if (time >= 30 * HZ)
+               goto finished;
+
+       if (phba->hba_state != LPFC_HBA_READY)
+               return 0;
+       if (phba->num_disc_nodes || phba->fc_prli_sent)
+               return 0;
+       if ((phba->fc_map_cnt == 0) && (time < 2 * HZ))
+               return 0;
+       if (phba->sli.sli_flag & LPFC_SLI_MBOX_ACTIVE)
+               return 0;
+       if ((phba->hba_state > LPFC_LINK_DOWN) || (time < 15 * HZ))
+               return 0;
+
+finished:
+       if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
+               spin_lock_irq(shost->host_lock);
+               lpfc_poll_start_timer(phba);
+               spin_unlock_irq(shost->host_lock);
+       }
+
+       /*
+        * set fixed host attributes
+        * Must done after lpfc_sli_hba_setup()
+        */
+
+       fc_host_node_name(shost) = wwn_to_u64(phba->fc_nodename.u.wwn);
+       fc_host_port_name(shost) = wwn_to_u64(phba->fc_portname.u.wwn);
+       fc_host_supported_classes(shost) = FC_COS_CLASS3;
+
+       memset(fc_host_supported_fc4s(shost), 0,
+               sizeof(fc_host_supported_fc4s(shost)));
+       fc_host_supported_fc4s(shost)[2] = 1;
+       fc_host_supported_fc4s(shost)[7] = 1;
+
+       lpfc_get_hba_sym_node_name(phba, fc_host_symbolic_name(shost));
+
+       fc_host_supported_speeds(shost) = 0;
+       if (phba->lmt & LMT_10Gb)
+               fc_host_supported_speeds(shost) |= FC_PORTSPEED_10GBIT;
+       if (phba->lmt & LMT_4Gb)
+               fc_host_supported_speeds(shost) |= FC_PORTSPEED_4GBIT;
+       if (phba->lmt & LMT_2Gb)
+               fc_host_supported_speeds(shost) |= FC_PORTSPEED_2GBIT;
+       if (phba->lmt & LMT_1Gb)
+               fc_host_supported_speeds(shost) |= FC_PORTSPEED_1GBIT;
+
+       fc_host_maxframe_size(shost) =
+               ((((uint32_t) phba->fc_sparam.cmn.bbRcvSizeMsb & 0x0F) << 8) |
+                (uint32_t) phba->fc_sparam.cmn.bbRcvSizeLsb);
+
+       /* This value is also unchanging */
+       memset(fc_host_active_fc4s(shost), 0,
+               sizeof(fc_host_active_fc4s(shost)));
+       fc_host_active_fc4s(shost)[2] = 1;
+       fc_host_active_fc4s(shost)[7] = 1;
+
+       spin_lock_irq(shost->host_lock);
+       phba->fc_flag &= ~FC_LOADING;
+       spin_unlock_irq(shost->host_lock);
+
+       return 1;
+}
 
 static int __devinit
 lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
@@ -1552,13 +1675,6 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
 
        host->transportt = lpfc_transport_template;
        pci_set_drvdata(pdev, host);
-       error = scsi_add_host(host, &pdev->dev);
-       if (error)
-               goto out_kthread_stop;
-
-       error = lpfc_alloc_sysfs_attr(phba);
-       if (error)
-               goto out_remove_host;
 
        if (phba->cfg_use_msi) {
                error = pci_enable_msi(phba->pcidev);
@@ -1574,73 +1690,15 @@ lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                        "%d:0451 Enable interrupt handler failed\n",
                        phba->brd_no);
-               goto out_free_sysfs_attr;
+               goto out_kthread_stop;
        }
-       phba->MBslimaddr = phba->slim_memmap_p;
-       phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
-       phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
-       phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
-       phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
 
-       error = lpfc_sli_hba_setup(phba);
-       if (error) {
-               error = -ENODEV;
+       error = scsi_add_host(host, &pdev->dev);
+       if (error)
                goto out_free_irq;
-       }
-
-       /*
-        * hba setup may have changed the hba_queue_depth so we need to adjust
-        * the value of can_queue.
-        */
-       host->can_queue = phba->cfg_hba_queue_depth - 10;
-
-       lpfc_discovery_wait(phba);
-
-       if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
-               spin_lock_irq(phba->host->host_lock);
-               lpfc_poll_start_timer(phba);
-               spin_unlock_irq(phba->host->host_lock);
-       }
 
-       /*
-        * set fixed host attributes
-        * Must done after lpfc_sli_hba_setup()
-        */
-
-       fc_host_node_name(host) = wwn_to_u64(phba->fc_nodename.u.wwn);
-       fc_host_port_name(host) = wwn_to_u64(phba->fc_portname.u.wwn);
-       fc_host_supported_classes(host) = FC_COS_CLASS3;
-
-       memset(fc_host_supported_fc4s(host), 0,
-               sizeof(fc_host_supported_fc4s(host)));
-       fc_host_supported_fc4s(host)[2] = 1;
-       fc_host_supported_fc4s(host)[7] = 1;
-
-       lpfc_get_hba_sym_node_name(phba, fc_host_symbolic_name(host));
-
-       fc_host_supported_speeds(host) = 0;
-       if (phba->lmt & LMT_10Gb)
-               fc_host_supported_speeds(host) |= FC_PORTSPEED_10GBIT;
-       if (phba->lmt & LMT_4Gb)
-               fc_host_supported_speeds(host) |= FC_PORTSPEED_4GBIT;
-       if (phba->lmt & LMT_2Gb)
-               fc_host_supported_speeds(host) |= FC_PORTSPEED_2GBIT;
-       if (phba->lmt & LMT_1Gb)
-               fc_host_supported_speeds(host) |= FC_PORTSPEED_1GBIT;
-
-       fc_host_maxframe_size(host) =
-               ((((uint32_t) phba->fc_sparam.cmn.bbRcvSizeMsb & 0x0F) << 8) |
-                (uint32_t) phba->fc_sparam.cmn.bbRcvSizeLsb);
-
-       /* This value is also unchanging */
-       memset(fc_host_active_fc4s(host), 0,
-               sizeof(fc_host_active_fc4s(host)));
-       fc_host_active_fc4s(host)[2] = 1;
-       fc_host_active_fc4s(host)[7] = 1;
+       scsi_scan_host(host);
 
-       spin_lock_irq(phba->host->host_lock);
-       phba->fc_flag &= ~FC_LOADING;
-       spin_unlock_irq(phba->host->host_lock);
        return 0;
 
 out_free_irq:
@@ -1648,11 +1706,6 @@ out_free_irq:
        phba->work_hba_events = 0;
        free_irq(phba->pcidev->irq, phba);
        pci_disable_msi(phba->pcidev);
-out_free_sysfs_attr:
-       lpfc_free_sysfs_attr(phba);
-out_remove_host:
-       fc_remove_host(phba->host);
-       scsi_remove_host(phba->host);
 out_kthread_stop:
        kthread_stop(phba->worker_thread);
 out_free_iocbq:
@@ -1690,56 +1743,8 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
 {
        struct Scsi_Host   *host = pci_get_drvdata(pdev);
        struct lpfc_hba    *phba = (struct lpfc_hba *)host->hostdata;
-       unsigned long iflag;
-
-       lpfc_free_sysfs_attr(phba);
-
-       spin_lock_irqsave(phba->host->host_lock, iflag);
-       phba->fc_flag |= FC_UNLOADING;
-
-       spin_unlock_irqrestore(phba->host->host_lock, iflag);
-
-       fc_remove_host(phba->host);
-       scsi_remove_host(phba->host);
-
-       kthread_stop(phba->worker_thread);
-
-       /*
-        * Bring down the SLI Layer. This step disable all interrupts,
-        * clears the rings, discards all mailbox commands, and resets
-        * the HBA.
-        */
-       lpfc_sli_hba_down(phba);
-       lpfc_sli_brdrestart(phba);
 
-       /* Release the irq reservation */
-       free_irq(phba->pcidev->irq, phba);
-       pci_disable_msi(phba->pcidev);
-
-       lpfc_cleanup(phba);
-       lpfc_stop_timer(phba);
-       phba->work_hba_events = 0;
-
-       /*
-        * Call scsi_free before mem_free since scsi bufs are released to their
-        * corresponding pools here.
-        */
-       lpfc_scsi_free(phba);
-       lpfc_mem_free(phba);
-
-       /* Free resources associated with SLI2 interface */
-       dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
-                         phba->slim2p, phba->slim2p_mapping);
-
-       /* unmap adapter SLIM and Control Registers */
-       iounmap(phba->ctrl_regs_memmap_p);
-       iounmap(phba->slim_memmap_p);
-
-       pci_release_regions(phba->pcidev);
-       pci_disable_device(phba->pcidev);
-
-       idr_remove(&lpfc_hba_index, phba->brd_no);
-       scsi_host_put(phba->host);
+       lpfc_remove_device(phba);
 
        pci_set_drvdata(pdev, NULL);
 }
index cc0f845d8b38971dfdb038a6277a4965a0cf9634..f09f3d211438d274a350223962e87daaab1a8456 100644 (file)
@@ -1351,6 +1351,8 @@ struct scsi_host_template lpfc_template = {
        .slave_alloc            = lpfc_slave_alloc,
        .slave_configure        = lpfc_slave_configure,
        .slave_destroy          = lpfc_slave_destroy,
+       .scan_finished          = lpfc_scan_finished,
+       .scan_start             = lpfc_scan_start,
        .this_id                = -1,
        .sg_tablesize           = LPFC_SG_SEG_CNT,
        .cmd_per_lun            = LPFC_CMD_PER_LUN,