Returns 1 if the psl timebase register is synchronized
with the core timebase register, 0 otherwise.
Users: https://github.com/ibm-capi/libcxl
+
+What: /sys/class/cxl/<card>/tunneled_ops_supported
+Date: May 2018
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ Returns 1 if tunneled operations are supported in capi mode,
+ 0 otherwise.
+Users: https://github.com/ibm-capi/libcxl
- main controller clock (for both armada-375-pp2 and armada-7k-pp2)
- GOP clock (for both armada-375-pp2 and armada-7k-pp2)
- MG clock (only for armada-7k-pp2)
+ - MG Core clock (only for armada-7k-pp2)
- AXI clock (only for armada-7k-pp2)
-- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk"
- and "axi_clk" (the 2 latter only for armada-7k-pp2).
+- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk",
+ "mg_core_clk" and "axi_clk" (the 3 latter only for armada-7k-pp2).
The ethernet ports are represented by subnodes. At least one port is
required.
compatible = "marvell,armada-7k-pp22";
reg = <0x0 0x100000>, <0x129000 0xb000>;
clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
- <&cpm_syscon0 1 5>, <&cpm_syscon0 1 18>;
- clock-names = "pp_clk", "gop_clk", "gp_clk", "axi_clk";
+ <&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>;
+ clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
eth0: eth0 {
interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
T: git git://anongit.freedesktop.org/drm/drm-misc
DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
-M: Vinod Koul <vinod.koul@intel.com>
+M: Vinod Koul <vkoul@kernel.org>
L: dmaengine@vger.kernel.org
Q: https://patchwork.kernel.org/project/linux-dmaengine/list/
S: Maintained
M: Shuah Khan <shuah@kernel.org>
L: linux-kselftest@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git
+Q: https://patchwork.kernel.org/project/linux-kselftest/list/
S: Maintained
F: tools/testing/selftests/
F: Documentation/dev-tools/kselftest*
S: Maintained
F: arch/alpha/kernel/srm_env.c
+ST STM32 I2C/SMBUS DRIVER
+M: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
+L: linux-i2c@vger.kernel.org
+S: Maintained
+F: drivers/i2c/busses/i2c-stm32*
+
STABLE BRANCH
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: stable@vger.kernel.org
timer@20200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x20200 0x100>;
- interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
clocks = <&periph_clk>;
};
stdout-path = "serial2:115200n8";
};
- memory {
- device_type = "memory";
+ memory@c0000000 {
+ /* 128 MB DDR2 SDRAM @ 0xc0000000 */
reg = <0xc0000000 0x08000000>;
};
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
-#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chosen { };
+ aliases { };
+
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x0>;
+ };
+
arm {
#address-cells = <1>;
#size-cells = <1>;
pmx_core: pinmux@14120 {
compatible = "pinctrl-single";
reg = <0x14120 0x50>;
- #address-cells = <1>;
- #size-cells = <0>;
#pinctrl-cells = <2>;
pinctrl-single,bit-per-mux;
pinctrl-single,register-width = <32>;
/ {
model = "DM8148 EVM";
- compatible = "ti,dm8148-evm", "ti,dm8148";
+ compatible = "ti,dm8148-evm", "ti,dm8148", "ti,dm814";
memory@80000000 {
device_type = "memory";
/ {
model = "HP t410 Smart Zero Client";
- compatible = "hp,t410", "ti,dm8148";
+ compatible = "hp,t410", "ti,dm8148", "ti,dm814";
memory@80000000 {
device_type = "memory";
/ {
model = "DM8168 EVM";
- compatible = "ti,dm8168-evm", "ti,dm8168";
+ compatible = "ti,dm8168-evm", "ti,dm8168", "ti,dm816";
memory@80000000 {
device_type = "memory";
/ {
model = "DRA62x J5 Eco EVM";
- compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148";
+ compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148", "ti,dm814";
memory@80000000 {
device_type = "memory";
};
touchscreen@20 {
- compatible = "syna,rmi4_i2c";
+ compatible = "syna,rmi4-i2c";
reg = <0x20>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ts>;
rmi4-f11@11 {
reg = <0x11>;
- touch-inverted-y;
- touch-swapped-x-y;
+ touchscreen-inverted-y;
+ touchscreen-swapped-x-y;
syna,sensor-type = <1>;
};
};
crypto: caam@30900000 {
compatible = "fsl,sec-v4.0";
+ fsl,sec-era = <8>;
#address-cells = <1>;
#size-cells = <1>;
reg = <0x30900000 0x40000>;
gpio = <&gpio1 3 0>; /* gpio_3 */
startup-delay-us = <70000>;
enable-active-high;
- vin-supply = <&vmmc2>;
+ vin-supply = <&vaux3>;
};
/* HS USB Host PHY on PORT 1 */
twl_audio: audio {
compatible = "ti,twl4030-audio";
codec {
+ ti,hs_extmute_gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
};
};
};
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */
>;
};
};
};
wl127x_gpio: pinmux_wl127x_gpio_pin {
pinctrl-single,pins = <
- OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */
+ OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */
OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */
>;
};
#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
+&vaux3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+};
+
&twl {
twl_power: power {
compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
port@0 {
reg = <0>;
adv7511_in: endpoint {
- remote-endpoint = <&du_out_lvds0>;
+ remote-endpoint = <&lvds0_out>;
};
};
status = "okay";
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
- <&cpg CPG_MOD 726>, <&cpg CPG_MOD 725>,
<&x13_clk>, <&x2_clk>;
- clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1",
- "dclkin.0", "dclkin.1";
+ clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1";
ports {
port@0 {
remote-endpoint = <&adv7123_in>;
};
};
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ ports {
port@1 {
endpoint {
remote-endpoint = <&adv7511_in>;
};
};
- port@2 {
+ };
+};
+
+&lvds1 {
+ status = "okay";
+
+ ports {
+ port@1 {
lvds_connector: endpoint {
};
};
du: display@feb00000 {
compatible = "renesas,du-r8a7790";
- reg = <0 0xfeb00000 0 0x70000>,
- <0 0xfeb90000 0 0x1c>,
- <0 0xfeb94000 0 0x1c>;
- reg-names = "du", "lvds.0", "lvds.1";
+ reg = <0 0xfeb00000 0 0x70000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
- <&cpg CPG_MOD 722>, <&cpg CPG_MOD 726>,
- <&cpg CPG_MOD 725>;
- clock-names = "du.0", "du.1", "du.2", "lvds.0",
- "lvds.1";
+ <&cpg CPG_MOD 722>;
+ clock-names = "du.0", "du.1", "du.2";
status = "disabled";
ports {
port@1 {
reg = <1>;
du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
};
};
port@2 {
reg = <2>;
du_out_lvds1: endpoint {
+ remote-endpoint = <&lvds1_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds@feb90000 {
+ compatible = "renesas,r8a7790-lvds";
+ reg = <0 0xfeb90000 0 0x1c>;
+ clocks = <&cpg CPG_MOD 726>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 726>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ lvds1: lvds@feb94000 {
+ compatible = "renesas,r8a7790-lvds";
+ reg = <0 0xfeb94000 0 0x1c>;
+ clocks = <&cpg CPG_MOD 725>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 725>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds1_in: endpoint {
+ remote-endpoint = <&du_out_lvds1>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds1_out: endpoint {
};
};
};
pinctrl-names = "default";
status = "okay";
- clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>,
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
<&x13_clk>, <&x2_clk>;
- clock-names = "du.0", "du.1", "lvds.0",
- "dclkin.0", "dclkin.1";
+ clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
ports {
port@0 {
remote-endpoint = <&adv7511_in>;
};
};
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ ports {
port@1 {
lvds_connector: endpoint {
};
pinctrl-names = "default";
status = "okay";
- clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>,
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
<&x3_clk>, <&x16_clk>;
- clock-names = "du.0", "du.1", "lvds.0",
- "dclkin.0", "dclkin.1";
+ clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
ports {
port@0 {
};
};
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds_connector: endpoint {
+ };
+ };
+ };
+};
+
&rcar_sound {
pinctrl-0 = <&ssi_pins &audio_clk_pins>;
pinctrl-names = "default";
du: display@feb00000 {
compatible = "renesas,du-r8a7791";
- reg = <0 0xfeb00000 0 0x40000>,
- <0 0xfeb90000 0 0x1c>;
- reg-names = "du", "lvds.0";
+ reg = <0 0xfeb00000 0 0x40000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>,
- <&cpg CPG_MOD 726>;
- clock-names = "du.0", "du.1", "lvds.0";
+ <&cpg CPG_MOD 723>;
+ clock-names = "du.0", "du.1";
status = "disabled";
ports {
port@1 {
reg = <1>;
du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds@feb90000 {
+ compatible = "renesas,r8a7791-lvds";
+ reg = <0 0xfeb90000 0 0x1c>;
+ clocks = <&cpg CPG_MOD 726>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 726>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
};
};
};
pinctrl-names = "default";
status = "okay";
- clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>,
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
<&x13_clk>, <&x2_clk>;
- clock-names = "du.0", "du.1", "lvds.0",
- "dclkin.0", "dclkin.1";
+ clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
ports {
port@0 {
remote-endpoint = <&adv7511_in>;
};
};
+ };
+};
+
+&lvds0 {
+ ports {
port@1 {
lvds_connector: endpoint {
};
du: display@feb00000 {
compatible = "renesas,du-r8a7793";
- reg = <0 0xfeb00000 0 0x40000>,
- <0 0xfeb90000 0 0x1c>;
- reg-names = "du", "lvds.0";
+ reg = <0 0xfeb00000 0 0x40000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>,
- <&cpg CPG_MOD 726>;
- clock-names = "du.0", "du.1", "lvds.0";
+ <&cpg CPG_MOD 723>;
+ clock-names = "du.0", "du.1";
status = "disabled";
ports {
port@1 {
reg = <1>;
du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds@feb90000 {
+ compatible = "renesas,r8a7793-lvds";
+ reg = <0 0xfeb90000 0 0x1c>;
+ clocks = <&cpg CPG_MOD 726>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 726>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
};
};
};
phy_type = "ulpi";
clocks = <&tegra_car TEGRA20_CLK_USB2>,
<&tegra_car TEGRA20_CLK_PLL_U>,
- <&tegra_car TEGRA20_CLK_PLL_P_OUT4>;
+ <&tegra_car TEGRA20_CLK_CDEV2>;
clock-names = "reg", "pll_u", "ulpi-link";
resets = <&tegra_car 58>, <&tegra_car 22>;
reset-names = "usb", "utmi-pads";
-1
};
+#define DA830_MMCSD_WP_PIN GPIO_TO_PIN(2, 1)
+#define DA830_MMCSD_CD_PIN GPIO_TO_PIN(2, 2)
+
static struct gpiod_lookup_table mmc_gpios_table = {
.dev_id = "da830-mmc.0",
.table = {
/* gpio chip 1 contains gpio range 32-63 */
- GPIO_LOOKUP("davinci_gpio.1", 2, "cd", GPIO_ACTIVE_LOW),
- GPIO_LOOKUP("davinci_gpio.1", 1, "wp", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("davinci_gpio.0", DA830_MMCSD_CD_PIN, "cd",
+ GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("davinci_gpio.0", DA830_MMCSD_WP_PIN, "wp",
+ GPIO_ACTIVE_LOW),
},
};
-1
};
+#define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0)
+#define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1)
+
static struct gpiod_lookup_table mmc_gpios_table = {
.dev_id = "da830-mmc.0",
.table = {
/* gpio chip 2 contains gpio range 64-95 */
- GPIO_LOOKUP("davinci_gpio.2", 0, "cd", GPIO_ACTIVE_LOW),
- GPIO_LOOKUP("davinci_gpio.2", 1, "wp", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_CD_PIN, "cd",
+ GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_WP_PIN, "wp",
+ GPIO_ACTIVE_LOW),
},
};
#include <linux/gpio.h>
#include <linux/gpio/machine.h>
#include <linux/clk.h>
+#include <linux/dm9000.h>
#include <linux/videodev2.h>
#include <media/i2c/tvp514x.h>
#include <linux/spi/spi.h>
},
};
+#define DM355_I2C_SDA_PIN GPIO_TO_PIN(0, 15)
+#define DM355_I2C_SCL_PIN GPIO_TO_PIN(0, 14)
+
static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
- .dev_id = "i2c_davinci",
+ .dev_id = "i2c_davinci.1",
.table = {
- GPIO_LOOKUP("davinci_gpio", 15, "sda",
+ GPIO_LOOKUP("davinci_gpio.0", DM355_I2C_SDA_PIN, "sda",
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- GPIO_LOOKUP("davinci_gpio", 14, "scl",
+ GPIO_LOOKUP("davinci_gpio.0", DM355_I2C_SCL_PIN, "scl",
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
},
};
},
};
+static struct dm9000_plat_data dm335evm_dm9000_platdata;
+
static struct platform_device dm355evm_dm9000 = {
.name = "dm9000",
.id = -1,
.resource = dm355evm_dm9000_rsrc,
.num_resources = ARRAY_SIZE(dm355evm_dm9000_rsrc),
+ .dev = {
+ .platform_data = &dm335evm_dm9000_platdata,
+ },
};
static struct tvp514x_platform_data tvp5146_pdata = {
#include <linux/i2c.h>
#include <linux/platform_data/pcf857x.h>
#include <linux/platform_data/at24.h>
+#include <linux/platform_data/gpio-davinci.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
},
};
+#define DM644X_I2C_SDA_PIN GPIO_TO_PIN(2, 12)
+#define DM644X_I2C_SCL_PIN GPIO_TO_PIN(2, 11)
+
static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
- .dev_id = "i2c_davinci",
+ .dev_id = "i2c_davinci.1",
.table = {
- GPIO_LOOKUP("davinci_gpio", 44, "sda",
+ GPIO_LOOKUP("davinci_gpio.0", DM644X_I2C_SDA_PIN, "sda",
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- GPIO_LOOKUP("davinci_gpio", 43, "scl",
+ GPIO_LOOKUP("davinci_gpio.0", DM644X_I2C_SCL_PIN, "scl",
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
},
};
.set_clock = set_vpif_clock,
.subdevinfo = dm646x_vpif_subdev,
.subdev_count = ARRAY_SIZE(dm646x_vpif_subdev),
+ .i2c_adapter_id = 1,
.chan_config[0] = {
.outputs = dm6467_ch0_outputs,
.output_count = ARRAY_SIZE(dm6467_ch0_outputs),
},
- .card_name = "DM646x EVM",
+ .card_name = "DM646x EVM Video Display",
};
/**
.setup_input_channel_mode = setup_vpif_input_channel_mode,
.subdev_info = vpif_capture_sdev_info,
.subdev_count = ARRAY_SIZE(vpif_capture_sdev_info),
+ .i2c_adapter_id = 1,
.chan_config[0] = {
.inputs = dm6467_ch0_inputs,
.input_count = ARRAY_SIZE(dm6467_ch0_inputs),
.fid_pol = 0,
},
},
+ .card_name = "DM646x EVM Video Capture",
};
static void __init evm_init_video(void)
-1
};
+#define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12)
+#define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13)
+
static struct gpiod_lookup_table mmc_gpios_table = {
.dev_id = "da830-mmc.0",
.table = {
- /* CD: gpio3_12: gpio60: chip 1 contains gpio range 32-63*/
- GPIO_LOOKUP("davinci_gpio.0", 28, "cd", GPIO_ACTIVE_LOW),
- GPIO_LOOKUP("davinci_gpio.0", 29, "wp", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("davinci_gpio.0", DA850_HAWK_MMCSD_CD_PIN, "cd",
+ GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("davinci_gpio.0", DA850_HAWK_MMCSD_WP_PIN, "wp",
+ GPIO_ACTIVE_LOW),
},
};
[IRQ_DM646X_MCASP0TXINT] = 7,
[IRQ_DM646X_MCASP0RXINT] = 7,
[IRQ_DM646X_RESERVED_3] = 7,
- [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */
+ [IRQ_DM646X_MCASP1TXINT] = 7,
+ [IRQ_TINT0_TINT12] = 7, /* clockevent */
[IRQ_TINT0_TINT34] = 7, /* clocksource */
[IRQ_TINT1_TINT12] = 7, /* DSP timer */
[IRQ_TINT1_TINT34] = 7, /* system tick */
static struct pm_clk_notifier_block platform_domain_notifier = {
.pm_domain = &keystone_pm_domain,
+ .con_ids = { NULL },
};
static const struct of_device_id of_keystone_table[] = {
irq_num = gpio_to_irq(gpio);
fiq_count = fiq_buffer[FIQ_CNT_INT_00 + gpio];
- while (irq_counter[gpio] < fiq_count) {
- if (gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) {
- struct irq_data *d = irq_get_irq_data(irq_num);
-
- /*
- * It looks like handle_edge_irq() that
- * OMAP GPIO edge interrupts default to,
- * expects interrupt already unmasked.
- */
- if (irq_chip && irq_chip->irq_unmask)
+ if (irq_counter[gpio] < fiq_count &&
+ gpio != AMS_DELTA_GPIO_PIN_KEYBRD_CLK) {
+ struct irq_data *d = irq_get_irq_data(irq_num);
+
+ /*
+ * handle_simple_irq() that OMAP GPIO edge
+ * interrupts default to since commit 80ac93c27441
+ * requires interrupt already acked and unmasked.
+ */
+ if (irq_chip) {
+ if (irq_chip->irq_ack)
+ irq_chip->irq_ack(d);
+ if (irq_chip->irq_unmask)
irq_chip->irq_unmask(d);
}
- generic_handle_irq(irq_num);
-
- irq_counter[gpio]++;
}
+ for (; irq_counter[gpio] < fiq_count; irq_counter[gpio]++)
+ generic_handle_irq(irq_num);
}
return IRQ_HANDLED;
}
((prev & OMAP_POWERSTATE_MASK) << 0));
trace_power_domain_target_rcuidle(pwrdm->name,
trace_state,
- smp_processor_id());
+ raw_smp_processor_id());
}
break;
default:
if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) {
/* Trace the pwrdm desired target state */
trace_power_domain_target_rcuidle(pwrdm->name, pwrst,
- smp_processor_id());
+ raw_smp_processor_id());
/* Program the pwrdm desired target state */
ret = arch_pwrdm->pwrdm_set_next_pwrst(pwrdm, pwrst);
}
reg = <0x14d60000 0x100>;
dmas = <&pdma0 31 &pdma0 30>;
dma-names = "tx", "rx";
- interrupts = <GIC_SPI 435 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu_peric CLK_PCLK_I2S1>,
<&cmu_peric CLK_PCLK_I2S1>,
<&cmu_peric CLK_SCLK_I2S1>;
compatible = "marvell,armada-7k-pp22";
reg = <0x0 0x100000>, <0x129000 0xb000>;
clocks = <&CP110_LABEL(clk) 1 3>, <&CP110_LABEL(clk) 1 9>,
- <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 18>;
+ <&CP110_LABEL(clk) 1 5>, <&CP110_LABEL(clk) 1 6>,
+ <&CP110_LABEL(clk) 1 18>;
clock-names = "pp_clk", "gop_clk",
- "mg_clk", "axi_clk";
+ "mg_clk", "mg_core_clk", "axi_clk";
marvell,system-controller = <&CP110_LABEL(syscon0)>;
status = "disabled";
dma-coherent;
#size-cells = <0>;
compatible = "marvell,xmdio";
reg = <0x12a600 0x10>;
+ clocks = <&CP110_LABEL(clk) 1 5>,
+ <&CP110_LABEL(clk) 1 6>, <&CP110_LABEL(clk) 1 18>;
status = "disabled";
};
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0x0>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_MAIN_GPIO(M, 5) IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <TEGRA_MAIN_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>;
};
};
};
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
- cdns,phy-input-delay-legacy = <4>;
+ cdns,phy-input-delay-legacy = <9>;
cdns,phy-input-delay-mmc-highspeed = <2>;
cdns,phy-input-delay-mmc-ddr = <3>;
cdns,phy-dll-delay-sdclk = <21>;
reg = <0>;
};
};
+
+&pinctrl_ether_rgmii {
+ tx {
+ pins = "RGMII_TXCLK", "RGMII_TXD0", "RGMII_TXD1",
+ "RGMII_TXD2", "RGMII_TXD3", "RGMII_TXCTL";
+ drive-strength = <9>;
+ };
+};
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
- cdns,phy-input-delay-legacy = <4>;
+ cdns,phy-input-delay-legacy = <9>;
cdns,phy-input-delay-mmc-highspeed = <2>;
cdns,phy-input-delay-mmc-ddr = <3>;
cdns,phy-dll-delay-sdclk = <21>;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
- cdns,phy-input-delay-legacy = <4>;
+ cdns,phy-input-delay-legacy = <9>;
cdns,phy-input-delay-mmc-highspeed = <2>;
cdns,phy-input-delay-mmc-ddr = <3>;
cdns,phy-dll-delay-sdclk = <21>;
return count;
}
+/*
+ * This can be called in the panic path with interrupts off, so use
+ * mdelay in that case.
+ */
static ssize_t opal_nvram_write(char *buf, size_t count, loff_t *index)
{
s64 rc = OPAL_BUSY;
while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
rc = opal_write_nvram(__pa(buf), count, off);
if (rc == OPAL_BUSY_EVENT) {
- msleep(OPAL_BUSY_DELAY_MS);
+ if (in_interrupt() || irqs_disabled())
+ mdelay(OPAL_BUSY_DELAY_MS);
+ else
+ msleep(OPAL_BUSY_DELAY_MS);
opal_poll_events(NULL);
} else if (rc == OPAL_BUSY) {
- msleep(OPAL_BUSY_DELAY_MS);
+ if (in_interrupt() || irqs_disabled())
+ mdelay(OPAL_BUSY_DELAY_MS);
+ else
+ msleep(OPAL_BUSY_DELAY_MS);
}
}
if (status != EFI_SUCCESS)
goto free_struct;
- memcpy(rom->romdata, pci->romimage, pci->romsize);
+ memcpy(rom->romdata, (void *)(unsigned long)pci->romimage,
+ pci->romsize);
return status;
free_struct:
if (status != EFI_SUCCESS)
goto free_struct;
- memcpy(rom->romdata, pci->romimage, pci->romsize);
+ memcpy(rom->romdata, (void *)(unsigned long)pci->romimage,
+ pci->romsize);
return status;
free_struct:
#define setup_force_cpu_bug(bit) setup_force_cpu_cap(bit)
+#if defined(__clang__) && !defined(CC_HAVE_ASM_GOTO)
+
+/*
+ * Workaround for the sake of BPF compilation which utilizes kernel
+ * headers, but clang does not support ASM GOTO and fails the build.
+ */
+#ifndef __BPF_TRACING__
+#warning "Compiler lacks ASM_GOTO support. Add -D __BPF_TRACING__ to your compiler arguments"
+#endif
+
+#define static_cpu_has(bit) boot_cpu_has(bit)
+
+#else
+
/*
* Static testing of CPU features. Used the same as boot_cpu_has().
* These will statically patch the target code for additional
boot_cpu_has(bit) : \
_static_cpu_has(bit) \
)
+#endif
#define cpu_has_bug(c, bit) cpu_has(c, (bit))
#define set_cpu_bug(c, bit) set_cpu_cap(c, (bit))
return insn_offset_displacement(insn) + insn->displacement.nbytes;
}
+#define POP_SS_OPCODE 0x1f
+#define MOV_SREG_OPCODE 0x8e
+
+/*
+ * Intel SDM Vol.3A 6.8.3 states;
+ * "Any single-step trap that would be delivered following the MOV to SS
+ * instruction or POP to SS instruction (because EFLAGS.TF is 1) is
+ * suppressed."
+ * This function returns true if @insn is MOV SS or POP SS. On these
+ * instructions, single stepping is suppressed.
+ */
+static inline int insn_masking_exception(struct insn *insn)
+{
+ return insn->opcode.bytes[0] == POP_SS_OPCODE ||
+ (insn->opcode.bytes[0] == MOV_SREG_OPCODE &&
+ X86_MODRM_REG(insn->modrm.bytes[0]) == 2);
+}
+
#endif /* _ASM_X86_INSN_H */
[SMCA_SMU] = { "smu", "System Management Unit" },
};
+static u32 smca_bank_addrs[MAX_NR_BANKS][NR_BLOCKS] __ro_after_init =
+{
+ [0 ... MAX_NR_BANKS - 1] = { [0 ... NR_BLOCKS - 1] = -1 }
+};
+
const char *smca_get_name(enum smca_bank_types t)
{
if (t >= N_SMCA_BANK_TYPES)
if (!block)
return MSR_AMD64_SMCA_MCx_MISC(bank);
+ /* Check our cache first: */
+ if (smca_bank_addrs[bank][block] != -1)
+ return smca_bank_addrs[bank][block];
+
/*
* For SMCA enabled processors, BLKPTR field of the first MISC register
* (MCx_MISC0) indicates presence of additional MISC regs set (MISC1-4).
*/
if (rdmsr_safe_on_cpu(cpu, MSR_AMD64_SMCA_MCx_CONFIG(bank), &low, &high))
- return addr;
+ goto out;
if (!(low & MCI_CONFIG_MCAX))
- return addr;
+ goto out;
if (!rdmsr_safe_on_cpu(cpu, MSR_AMD64_SMCA_MCx_MISC(bank), &low, &high) &&
(low & MASK_BLKPTR_LO))
- return MSR_AMD64_SMCA_MCx_MISCy(bank, block - 1);
+ addr = MSR_AMD64_SMCA_MCx_MISCy(bank, block - 1);
+out:
+ smca_bank_addrs[bank][block] = addr;
return addr;
}
if ((bank >= mca_cfg.banks) || (block >= NR_BLOCKS))
return addr;
- /* Get address from already initialized block. */
- if (per_cpu(threshold_banks, cpu)) {
- struct threshold_bank *bankp = per_cpu(threshold_banks, cpu)[bank];
-
- if (bankp && bankp->blocks) {
- struct threshold_block *blockp = &bankp->blocks[block];
-
- if (blockp)
- return blockp->address;
- }
- }
-
if (mce_flags.smca)
return smca_get_block_address(cpu, bank, block);
if (insn->opcode.bytes[0] == BREAKPOINT_INSTRUCTION)
return 0;
+ /* We should not singlestep on the exception masking instructions */
+ if (insn_masking_exception(insn))
+ return 0;
+
#ifdef CONFIG_X86_64
/* Only x86_64 has RIP relative instructions */
if (insn_rip_relative(insn)) {
static void machine_kexec_free_page_tables(struct kimage *image)
{
free_page((unsigned long)image->arch.pgd);
+ image->arch.pgd = NULL;
#ifdef CONFIG_X86_PAE
free_page((unsigned long)image->arch.pmd0);
+ image->arch.pmd0 = NULL;
free_page((unsigned long)image->arch.pmd1);
+ image->arch.pmd1 = NULL;
#endif
free_page((unsigned long)image->arch.pte0);
+ image->arch.pte0 = NULL;
free_page((unsigned long)image->arch.pte1);
+ image->arch.pte1 = NULL;
}
static int machine_kexec_alloc_page_tables(struct kimage *image)
!image->arch.pmd0 || !image->arch.pmd1 ||
#endif
!image->arch.pte0 || !image->arch.pte1) {
- machine_kexec_free_page_tables(image);
return -ENOMEM;
}
return 0;
static void free_transition_pgtable(struct kimage *image)
{
free_page((unsigned long)image->arch.p4d);
+ image->arch.p4d = NULL;
free_page((unsigned long)image->arch.pud);
+ image->arch.pud = NULL;
free_page((unsigned long)image->arch.pmd);
+ image->arch.pmd = NULL;
free_page((unsigned long)image->arch.pte);
+ image->arch.pte = NULL;
}
static int init_transition_pgtable(struct kimage *image, pgd_t *pgd)
set_pte(pte, pfn_pte(paddr >> PAGE_SHIFT, PAGE_KERNEL_EXEC_NOENC));
return 0;
err:
- free_transition_pgtable(image);
return result;
}
if (is_prefix_bad(insn))
return -ENOTSUPP;
+ /* We should not singlestep on the exception masking instructions */
+ if (insn_masking_exception(insn))
+ return -ENOTSUPP;
+
if (x86_64)
good_insns = good_insns_64;
else
acpi_status acpi_ns_initialize_devices(u32 flags);
+acpi_status
+acpi_ns_init_one_package(acpi_handle obj_handle,
+ u32 level, void *context, void **return_value);
+
/*
* nsload - Namespace loading
*/
return_ACPI_STATUS(status);
}
+ /* Complete the initialization/resolution of package objects */
+
+ status = acpi_ns_walk_namespace(ACPI_TYPE_PACKAGE, ACPI_ROOT_OBJECT,
+ ACPI_UINT32_MAX, 0,
+ acpi_ns_init_one_package, NULL, NULL,
+ NULL);
+
/* Parameter Data (optional) */
if (parameter_node) {
return_ACPI_STATUS(status);
}
+ /* Complete the initialization/resolution of package objects */
+
+ status = acpi_ns_walk_namespace(ACPI_TYPE_PACKAGE, ACPI_ROOT_OBJECT,
+ ACPI_UINT32_MAX, 0,
+ acpi_ns_init_one_package, NULL, NULL,
+ NULL);
+
/* Store the ddb_handle into the Target operand */
status = acpi_ex_store(ddb_handle, target, walk_state);
return_ACPI_STATUS(status);
}
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ns_init_one_package
+ *
+ * PARAMETERS: obj_handle - Node
+ * level - Current nesting level
+ * context - Not used
+ * return_value - Not used
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Callback from acpi_walk_namespace. Invoked for every package
+ * within the namespace. Used during dynamic load of an SSDT.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ns_init_one_package(acpi_handle obj_handle,
+ u32 level, void *context, void **return_value)
+{
+ acpi_status status;
+ union acpi_operand_object *obj_desc;
+ struct acpi_namespace_node *node =
+ (struct acpi_namespace_node *)obj_handle;
+
+ obj_desc = acpi_ns_get_attached_object(node);
+ if (!obj_desc) {
+ return (AE_OK);
+ }
+
+ /* Exit if package is already initialized */
+
+ if (obj_desc->package.flags & AOPOBJ_DATA_VALID) {
+ return (AE_OK);
+ }
+
+ status = acpi_ds_get_package_arguments(obj_desc);
+ if (ACPI_FAILURE(status)) {
+ return (AE_OK);
+ }
+
+ status =
+ acpi_ut_walk_package_tree(obj_desc, NULL,
+ acpi_ds_init_package_element, NULL);
+ if (ACPI_FAILURE(status)) {
+ return (AE_OK);
+ }
+
+ obj_desc->package.flags |= AOPOBJ_DATA_VALID;
+ return (AE_OK);
+}
+
/*******************************************************************************
*
* FUNCTION: acpi_ns_init_one_object
case ACPI_TYPE_PACKAGE:
- info->package_init++;
- status = acpi_ds_get_package_arguments(obj_desc);
- if (ACPI_FAILURE(status)) {
- break;
- }
-
- ACPI_DEBUG_PRINT_RAW((ACPI_DB_PARSE,
- "%s: Completing resolution of Package elements\n",
- ACPI_GET_FUNCTION_NAME));
+ /* Complete the initialization/resolution of the package object */
- /*
- * Resolve all named references in package objects (and all
- * sub-packages). This action has been deferred until the entire
- * namespace has been loaded, in order to support external and
- * forward references from individual package elements (05/2017).
- */
- status = acpi_ut_walk_package_tree(obj_desc, NULL,
- acpi_ds_init_package_element,
- NULL);
-
- obj_desc->package.flags |= AOPOBJ_DATA_VALID;
+ info->package_init++;
+ status =
+ acpi_ns_init_one_package(obj_handle, level, NULL, NULL);
break;
default:
Support for stm32mp157 SoC family clocks
config COMMON_CLK_STM32F
- bool "Clock driver for stm32f4 and stm32f7 SoC families"
- depends on MACH_STM32F429 || MACH_STM32F469 || MACH_STM32F746
+ def_bool COMMON_CLK && (MACH_STM32F429 || MACH_STM32F469 || MACH_STM32F746)
help
---help---
Support for stm32f4 and stm32f7 SoC families clocks
config COMMON_CLK_STM32H7
- bool "Clock driver for stm32h7 SoC family"
- depends on MACH_STM32H743
+ def_bool COMMON_CLK && MACH_STM32H743
help
---help---
Support for stm32h7 SoC family clocks
clk_set_rate(clks[IMX6UL_CLK_AHB], 99000000);
/* Change periph_pre clock to pll2_bus to adjust AXI rate to 264MHz */
- clk_set_parent(clks[IMX6UL_CLK_PERIPH_CLK2_SEL], clks[IMX6UL_CLK_PLL3_USB_OTG]);
+ clk_set_parent(clks[IMX6UL_CLK_PERIPH_CLK2_SEL], clks[IMX6UL_CLK_OSC]);
clk_set_parent(clks[IMX6UL_CLK_PERIPH], clks[IMX6UL_CLK_PERIPH_CLK2]);
clk_set_parent(clks[IMX6UL_CLK_PERIPH_PRE], clks[IMX6UL_CLK_PLL2_BUS]);
clk_set_parent(clks[IMX6UL_CLK_PERIPH], clks[IMX6UL_CLK_PERIPH_PRE]);
config ARM_ARMADA_37XX_CPUFREQ
tristate "Armada 37xx CPUFreq support"
- depends on ARCH_MVEBU
+ depends on ARCH_MVEBU && CPUFREQ_DT
help
This adds the CPUFreq driver support for Marvell Armada 37xx SoCs.
The Armada 37xx PMU supports 4 frequency and VDD levels.
return 0;
}
+static int bam_pm_runtime_get_sync(struct device *dev)
+{
+ if (pm_runtime_enabled(dev))
+ return pm_runtime_get_sync(dev);
+
+ return 0;
+}
+
/**
* bam_free_chan - Frees dma resources associated with specific channel
* @chan: specified channel
unsigned long flags;
int ret;
- ret = pm_runtime_get_sync(bdev->dev);
+ ret = bam_pm_runtime_get_sync(bdev->dev);
if (ret < 0)
return;
unsigned long flag;
int ret;
- ret = pm_runtime_get_sync(bdev->dev);
+ ret = bam_pm_runtime_get_sync(bdev->dev);
if (ret < 0)
return ret;
unsigned long flag;
int ret;
- ret = pm_runtime_get_sync(bdev->dev);
+ ret = bam_pm_runtime_get_sync(bdev->dev);
if (ret < 0)
return ret;
if (srcs & P_IRQ)
tasklet_schedule(&bdev->task);
- ret = pm_runtime_get_sync(bdev->dev);
+ ret = bam_pm_runtime_get_sync(bdev->dev);
if (ret < 0)
return ret;
if (!vd)
return;
- ret = pm_runtime_get_sync(bdev->dev);
+ ret = bam_pm_runtime_get_sync(bdev->dev);
if (ret < 0)
return;
if (scmi_mbox_chan_setup(info, &sdev->dev, prot_id)) {
dev_err(&sdev->dev, "failed to setup transport\n");
scmi_device_destroy(sdev);
+ return;
}
/* setup handle now as the transport is ready */
u32 offset = !IS_ENABLED(CONFIG_DEBUG_ALIGN_RODATA) ?
(phys_seed >> 32) & mask : TEXT_OFFSET;
+ /*
+ * With CONFIG_RANDOMIZE_TEXT_OFFSET=y, TEXT_OFFSET may not
+ * be a multiple of EFI_KIMG_ALIGN, and we must ensure that
+ * we preserve the misalignment of 'offset' relative to
+ * EFI_KIMG_ALIGN so that statically allocated objects whose
+ * alignment exceeds PAGE_SIZE appear correctly aligned in
+ * memory.
+ */
+ offset |= TEXT_OFFSET % EFI_KIMG_ALIGN;
+
/*
* If KASLR is enabled, and we have some randomness available,
* locate the kernel at a randomized offset in physical memory.
if (!minor)
return;
- name = kasprintf(GFP_KERNEL, "controlD%d", minor->index);
+ name = kasprintf(GFP_KERNEL, "controlD%d", minor->index + 64);
if (!name)
return;
return -EINVAL;
/* overflow checks for 32bit size calculations */
- /* NOTE: DIV_ROUND_UP() can overflow */
+ if (args->bpp > U32_MAX - 8)
+ return -EINVAL;
cpp = DIV_ROUND_UP(args->bpp, 8);
- if (!cpp || cpp > 0xffffffffU / args->width)
+ if (cpp > U32_MAX / args->width)
return -EINVAL;
stride = cpp * args->width;
- if (args->height > 0xffffffffU / stride)
+ if (args->height > U32_MAX / stride)
return -EINVAL;
/* test for wrap-around */
I915_USERPTR_UNSYNCHRONIZED))
return -EINVAL;
+ if (!args->user_size)
+ return -EINVAL;
+
if (offset_in_page(args->user_ptr | args->user_size))
return -EINVAL;
#define SLICE_ECO_CHICKEN0 _MMIO(0x7308)
#define PIXEL_MASK_CAMMING_DISABLE (1 << 14)
+#define GEN9_WM_CHICKEN3 _MMIO(0x5588)
+#define GEN9_FACTOR_IN_CLR_VAL_HIZ (1 << 9)
+
/* WaCatErrorRejectionIssue */
#define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG _MMIO(0x9030)
#define GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB (1<<11)
WA_SET_FIELD_MASKED(GEN8_CS_CHICKEN1, GEN9_PREEMPT_GPGPU_LEVEL_MASK,
GEN9_PREEMPT_GPGPU_COMMAND_LEVEL);
+ /* WaClearHIZ_WM_CHICKEN3:bxt,glk */
+ if (IS_GEN9_LP(dev_priv))
+ WA_SET_BIT_MASKED(GEN9_WM_CHICKEN3, GEN9_FACTOR_IN_CLR_VAL_HIZ);
+
/* WaVFEStateAfterPipeControlwithMediaStateClear:skl,bxt,glk,cfl */
ret = wa_ring_whitelist_reg(engine, GEN9_CTX_PREEMPT_REG);
if (ret)
head = execlists->csb_head;
tail = READ_ONCE(buf[write_idx]);
+ rmb(); /* Hopefully paired with a wmb() in HW */
}
GEM_TRACE("%s cs-irq head=%d [%d%s], tail=%d [%d%s]\n",
engine->name,
struct vc4_file *vc4file = file->driver_priv;
vc4_perfmon_close_file(vc4file);
+ kfree(vc4file);
}
static const struct vm_operations_struct vc4_vm_ops = {
return ret;
}
+ vps->dmabuf_size = size;
+
/*
* TTM already thinks the buffer is pinned, but make sure the
* pin_count is upped.
i2c_dw_disable_int(dev);
/* Enable the adapter */
- __i2c_dw_enable_and_wait(dev, true);
+ __i2c_dw_enable(dev, true);
+
+ /* Dummy read to avoid the register getting stuck on Bay Trail */
+ dw_readl(dev, DW_IC_ENABLE_STATUS);
/* Clear and enable interrupts */
dw_readl(dev, DW_IC_CLR_INTR);
* TODO: We could potentially loop and retry in the case
* of MSP_TWI_XFER_TIMEOUT.
*/
- return -1;
+ return -EIO;
}
- return 0;
+ return num;
}
static u32 pmcmsptwi_i2c_func(struct i2c_adapter *adapter)
}
mutex_unlock(&vb->lock);
}
- return 0;
+ return num;
error:
mutex_unlock(&vb->lock);
return error;
msgs[1].buf = buffer;
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
- if (ret < 0)
- dev_err(&client->adapter->dev, "i2c read failed\n");
- else
+ if (ret < 0) {
+ /* Getting a NACK is unfortunately normal with some DSTDs */
+ if (ret == -EREMOTEIO)
+ dev_dbg(&client->adapter->dev, "i2c read %d bytes from client@%#x starting at reg %#x failed, error: %d\n",
+ data_len, client->addr, cmd, ret);
+ else
+ dev_err(&client->adapter->dev, "i2c read %d bytes from client@%#x starting at reg %#x failed, error: %d\n",
+ data_len, client->addr, cmd, ret);
+ } else {
memcpy(data, buffer, data_len);
+ }
kfree(buffer);
return ret;
int __init bch_debug_init(struct kobject *kobj)
{
- bcache_debug = debugfs_create_dir("bcache", NULL);
+ if (!IS_ENABLED(CONFIG_DEBUG_FS))
+ return 0;
+ bcache_debug = debugfs_create_dir("bcache", NULL);
return IS_ERR_OR_NULL(bcache_debug);
}
bool perst_select_user;
bool perst_same_image;
bool psl_timebase_synced;
+ bool tunneled_ops_supported;
/*
* number of contexts mapped on to this card. Possible values are:
/* Required for devices using CAPP DMA mode, harmless for others */
pci_set_master(dev);
+ adapter->tunneled_ops_supported = false;
+
+ if (cxl_is_power9()) {
+ if (pnv_pci_set_tunnel_bar(dev, 0x00020000E0000000ull, 1))
+ dev_info(&dev->dev, "Tunneled operations unsupported\n");
+ else
+ adapter->tunneled_ops_supported = true;
+ }
+
if ((rc = pnv_phb_to_cxl_mode(dev, adapter->native->sl_ops->capi_mode)))
goto err;
{
struct pci_dev *pdev = to_pci_dev(adapter->dev.parent);
+ if (cxl_is_power9())
+ pnv_pci_set_tunnel_bar(pdev, 0x00020000E0000000ull, 0);
+
cxl_native_release_psl_err_irq(adapter);
cxl_unmap_adapter_regs(adapter);
return scnprintf(buf, PAGE_SIZE, "%i\n", adapter->psl_timebase_synced);
}
+static ssize_t tunneled_ops_supported_show(struct device *device,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct cxl *adapter = to_cxl_adapter(device);
+
+ return scnprintf(buf, PAGE_SIZE, "%i\n", adapter->tunneled_ops_supported);
+}
+
static ssize_t reset_adapter_store(struct device *device,
struct device_attribute *attr,
const char *buf, size_t count)
__ATTR_RO(base_image),
__ATTR_RO(image_loaded),
__ATTR_RO(psl_timebase_synced),
+ __ATTR_RO(tunneled_ops_supported),
__ATTR_RW(load_image_on_perst),
__ATTR_RW(perst_reloads_same_image),
__ATTR(reset, S_IWUSR, NULL, reset_adapter_store),
if (of_node && of_match_device(at24_of_match, dev))
cdata = of_device_get_match_data(dev);
else if (id)
- cdata = (void *)&id->driver_data;
+ cdata = (void *)id->driver_data;
else
cdata = acpi_device_get_match_data(dev);
NDCB0_CMD2(NAND_CMD_READSTART);
/*
- * Trigger the naked read operation only on the last chunk.
- * Otherwise, use monolithic read.
+ * Trigger the monolithic read on the first chunk, then naked read on
+ * intermediate chunks and finally a last naked read on the last chunk.
*/
- if (lt->nchunks == 1 || (chunk < lt->nchunks - 1))
+ if (chunk == 0)
nfc_op.ndcb[0] |= NDCB0_CMD_XTYPE(XTYPE_MONOLITHIC_RW);
+ else if (chunk < lt->nchunks - 1)
+ nfc_op.ndcb[0] |= NDCB0_CMD_XTYPE(XTYPE_NAKED_RW);
else
nfc_op.ndcb[0] |= NDCB0_CMD_XTYPE(XTYPE_LAST_NAKED_RW);
depends on DMI
depends on INPUT
depends on ACPI_VIDEO || ACPI_VIDEO = n
+ depends on DELL_SMBIOS
select DELL_WMI_DESCRIPTOR
- select DELL_SMBIOS
select INPUT_SPARSEKMAP
---help---
Say Y here if you want to support WMI-based hotkeys on Dell laptops.
UNIPHIER_RESETX(4, 0x200c, 2), /* eMMC */
UNIPHIER_RESETX(6, 0x200c, 6), /* Ether */
UNIPHIER_RESETX(8, 0x200c, 8), /* STDMAC (HSC) */
- UNIPHIER_RESETX(12, 0x200c, 5), /* GIO (PCIe, USB3) */
+ UNIPHIER_RESETX(14, 0x200c, 5), /* USB30 */
UNIPHIER_RESETX(16, 0x200c, 12), /* USB30-PHY0 */
UNIPHIER_RESETX(17, 0x200c, 13), /* USB30-PHY1 */
UNIPHIER_RESETX(18, 0x200c, 14), /* USB30-PHY2 */
UNIPHIER_RESETX(6, 0x200c, 9), /* Ether0 */
UNIPHIER_RESETX(7, 0x200c, 10), /* Ether1 */
UNIPHIER_RESETX(8, 0x200c, 12), /* STDMAC */
- UNIPHIER_RESETX(12, 0x200c, 4), /* USB30 link (GIO0) */
- UNIPHIER_RESETX(13, 0x200c, 5), /* USB31 link (GIO1) */
+ UNIPHIER_RESETX(12, 0x200c, 4), /* USB30 link */
+ UNIPHIER_RESETX(13, 0x200c, 5), /* USB31 link */
UNIPHIER_RESETX(16, 0x200c, 16), /* USB30-PHY0 */
UNIPHIER_RESETX(17, 0x200c, 18), /* USB30-PHY1 */
UNIPHIER_RESETX(18, 0x200c, 20), /* USB30-PHY2 */
static void bcm_qspi_enable_bspi(struct bcm_qspi *qspi)
{
- if (!has_bspi(qspi) || (qspi->bspi_enabled))
+ if (!has_bspi(qspi))
return;
qspi->bspi_enabled = 1;
static void bcm_qspi_disable_bspi(struct bcm_qspi *qspi)
{
- if (!has_bspi(qspi) || (!qspi->bspi_enabled))
+ if (!has_bspi(qspi))
return;
qspi->bspi_enabled = 0;
static void bcm_qspi_chip_select(struct bcm_qspi *qspi, int cs)
{
- u32 data = 0;
+ u32 rd = 0;
+ u32 wr = 0;
- if (qspi->curr_cs == cs)
- return;
if (qspi->base[CHIP_SELECT]) {
- data = bcm_qspi_read(qspi, CHIP_SELECT, 0);
- data = (data & ~0xff) | (1 << cs);
- bcm_qspi_write(qspi, CHIP_SELECT, 0, data);
+ rd = bcm_qspi_read(qspi, CHIP_SELECT, 0);
+ wr = (rd & ~0xff) | (1 << cs);
+ if (rd == wr)
+ return;
+ bcm_qspi_write(qspi, CHIP_SELECT, 0, wr);
usleep_range(10, 20);
}
+
+ dev_dbg(&qspi->pdev->dev, "using cs:%d\n", cs);
qspi->curr_cs = cs;
}
dev_dbg(&qspi->pdev->dev, "WR %04x\n", val);
}
mspi_cdram = MSPI_CDRAM_CONT_BIT;
- mspi_cdram |= (~(1 << spi->chip_select) &
- MSPI_CDRAM_PCS);
+
+ if (has_bspi(qspi))
+ mspi_cdram &= ~1;
+ else
+ mspi_cdram |= (~(1 << spi->chip_select) &
+ MSPI_CDRAM_PCS);
+
mspi_cdram |= ((tp.trans->bits_per_word <= 8) ? 0 :
MSPI_CDRAM_BITSE_BIT);
struct bcm2835aux_spi *bs = spi_master_get_devdata(master);
irqreturn_t ret = IRQ_NONE;
+ /* IRQ may be shared, so return if our interrupts are disabled */
+ if (!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_CNTL1) &
+ (BCM2835_AUX_SPI_CNTL1_TXEMPTY | BCM2835_AUX_SPI_CNTL1_IDLE)))
+ return ret;
+
/* check if we have data to read */
while (bs->rx_len &&
(!(bcm2835aux_rd(bs, BCM2835_AUX_SPI_STAT) &
while ((trans_cnt < CDNS_SPI_FIFO_DEPTH) &&
(xspi->tx_bytes > 0)) {
+
+ /* When xspi in busy condition, bytes may send failed,
+ * then spi control did't work thoroughly, add one byte delay
+ */
+ if (cdns_spi_read(xspi, CDNS_SPI_ISR) &
+ CDNS_SPI_IXR_TXFULL)
+ usleep_range(10, 20);
+
if (xspi->txbuf)
cdns_spi_write(xspi, CDNS_SPI_TXD, *xspi->txbuf++);
else
};
module_platform_driver(spi_imx_driver);
-MODULE_DESCRIPTION("SPI Master Controller driver");
+MODULE_DESCRIPTION("SPI Controller driver");
MODULE_AUTHOR("Sascha Hauer, Pengutronix");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRIVER_NAME);
/* SSP register addresses */
void __iomem *ioaddr;
- u32 ssdr_physical;
+ phys_addr_t ssdr_physical;
/* SSP masks*/
u32 dma_cr1;
}
k = min_t(int, k, ARRAY_SIZE(sh_msiof_spi_div_table) - 1);
+ brps = min_t(int, brps, 32);
scr = sh_msiof_spi_div_table[k].brdv | SCR_BRPS(brps);
sh_msiof_write(p, TSCR, scr);
if (IS_ERR(shm))
return PTR_ERR(shm);
+ /*
+ * Ensure offset + size does not overflow offset
+ * and does not overflow the size of the referred
+ * shared memory object.
+ */
+ if ((ip.a + ip.b) < ip.a ||
+ (ip.a + ip.b) > shm->size) {
+ tee_shm_put(shm);
+ return -EINVAL;
+ }
+
params[n].u.memref.shm_offs = ip.a;
params[n].u.memref.size = ip.b;
params[n].u.memref.shm = shm;
if (!(shm->flags & TEE_SHM_DMA_BUF))
return -EINVAL;
+ get_dma_buf(shm->dmabuf);
fd = dma_buf_fd(shm->dmabuf, O_CLOEXEC);
- if (fd >= 0)
- get_dma_buf(shm->dmabuf);
+ if (fd < 0)
+ dma_buf_put(shm->dmabuf);
return fd;
}
slot_id = 0;
for (i = 0; i < MAX_HC_SLOTS; i++) {
- if (!xhci->devs[i])
+ if (!xhci->devs[i] || !xhci->devs[i]->udev)
continue;
speed = xhci->devs[i]->udev->speed;
if (((speed >= USB_SPEED_SUPER) == (hcd->speed >= HCD_USB3))
{
struct musb *musb = hcd_to_musb(hcd);
u8 devctl;
+ int ret;
- musb_port_suspend(musb, true);
+ ret = musb_port_suspend(musb, true);
+ if (ret)
+ return ret;
if (!is_host_active(musb))
return 0;
extern void musb_root_disconnect(struct musb *musb);
extern void musb_host_resume_root_hub(struct musb *musb);
extern void musb_host_poke_root_hub(struct musb *musb);
-extern void musb_port_suspend(struct musb *musb, bool do_suspend);
+extern int musb_port_suspend(struct musb *musb, bool do_suspend);
extern void musb_port_reset(struct musb *musb, bool do_reset);
extern void musb_host_finish_resume(struct work_struct *work);
#else
static inline void musb_host_resume_root_hub(struct musb *musb) {}
static inline void musb_host_poll_rh_status(struct musb *musb) {}
static inline void musb_host_poke_root_hub(struct musb *musb) {}
-static inline void musb_port_suspend(struct musb *musb, bool do_suspend) {}
+static inline int musb_port_suspend(struct musb *musb, bool do_suspend)
+{
+ return 0;
+}
static inline void musb_port_reset(struct musb *musb, bool do_reset) {}
static inline void musb_host_finish_resume(struct work_struct *work) {}
#endif
spin_unlock_irqrestore(&musb->lock, flags);
}
-void musb_port_suspend(struct musb *musb, bool do_suspend)
+int musb_port_suspend(struct musb *musb, bool do_suspend)
{
struct usb_otg *otg = musb->xceiv->otg;
u8 power;
void __iomem *mbase = musb->mregs;
if (!is_host_active(musb))
- return;
+ return 0;
/* NOTE: this doesn't necessarily put PHY into low power mode,
* turning off its clock; that's a function of PHY integration and
if (do_suspend) {
int retries = 10000;
- power &= ~MUSB_POWER_RESUME;
- power |= MUSB_POWER_SUSPENDM;
- musb_writeb(mbase, MUSB_POWER, power);
+ if (power & MUSB_POWER_RESUME)
+ return -EBUSY;
- /* Needed for OPT A tests */
- power = musb_readb(mbase, MUSB_POWER);
- while (power & MUSB_POWER_SUSPENDM) {
+ if (!(power & MUSB_POWER_SUSPENDM)) {
+ power |= MUSB_POWER_SUSPENDM;
+ musb_writeb(mbase, MUSB_POWER, power);
+
+ /* Needed for OPT A tests */
power = musb_readb(mbase, MUSB_POWER);
- if (retries-- < 1)
- break;
+ while (power & MUSB_POWER_SUSPENDM) {
+ power = musb_readb(mbase, MUSB_POWER);
+ if (retries-- < 1)
+ break;
+ }
}
musb_dbg(musb, "Root port suspended, power %02x", power);
schedule_delayed_work(&musb->finish_resume_work,
msecs_to_jiffies(USB_RESUME_TIMEOUT));
}
+ return 0;
}
void musb_port_reset(struct musb *musb, bool do_reset)
struct stub_device *sdev;
struct usb_device *udev;
char shutdown_busid;
+ spinlock_t busid_lock;
};
/* stub_priv is allocated from stub_priv_cache */
/* stub_main.c */
struct bus_id_priv *get_busid_priv(const char *busid);
+void put_busid_priv(struct bus_id_priv *bid);
int del_match_busid(char *busid);
void stub_device_cleanup_urbs(struct stub_device *sdev);
struct stub_device *sdev = NULL;
const char *udev_busid = dev_name(&udev->dev);
struct bus_id_priv *busid_priv;
- int rc;
+ int rc = 0;
- dev_dbg(&udev->dev, "Enter\n");
+ dev_dbg(&udev->dev, "Enter probe\n");
/* check we should claim or not by busid_table */
busid_priv = get_busid_priv(udev_busid);
* other matched drivers by the driver core.
* See driver_probe_device() in driver/base/dd.c
*/
- return -ENODEV;
+ rc = -ENODEV;
+ goto call_put_busid_priv;
}
if (udev->descriptor.bDeviceClass == USB_CLASS_HUB) {
dev_dbg(&udev->dev, "%s is a usb hub device... skip!\n",
udev_busid);
- return -ENODEV;
+ rc = -ENODEV;
+ goto call_put_busid_priv;
}
if (!strcmp(udev->bus->bus_name, "vhci_hcd")) {
"%s is attached on vhci_hcd... skip!\n",
udev_busid);
- return -ENODEV;
+ rc = -ENODEV;
+ goto call_put_busid_priv;
}
/* ok, this is my device */
sdev = stub_device_alloc(udev);
- if (!sdev)
- return -ENOMEM;
+ if (!sdev) {
+ rc = -ENOMEM;
+ goto call_put_busid_priv;
+ }
dev_info(&udev->dev,
"usbip-host: register new device (bus %u dev %u)\n",
}
busid_priv->status = STUB_BUSID_ALLOC;
- return 0;
+ rc = 0;
+ goto call_put_busid_priv;
+
err_files:
usb_hub_release_port(udev->parent, udev->portnum,
(struct usb_dev_state *) udev);
busid_priv->sdev = NULL;
stub_device_free(sdev);
+
+call_put_busid_priv:
+ put_busid_priv(busid_priv);
return rc;
}
struct bus_id_priv *busid_priv;
int rc;
- dev_dbg(&udev->dev, "Enter\n");
+ dev_dbg(&udev->dev, "Enter disconnect\n");
busid_priv = get_busid_priv(udev_busid);
if (!busid_priv) {
/* get stub_device */
if (!sdev) {
dev_err(&udev->dev, "could not get device");
- return;
+ goto call_put_busid_priv;
}
dev_set_drvdata(&udev->dev, NULL);
(struct usb_dev_state *) udev);
if (rc) {
dev_dbg(&udev->dev, "unable to release port\n");
- return;
+ goto call_put_busid_priv;
}
/* If usb reset is called from event handler */
if (usbip_in_eh(current))
- return;
+ goto call_put_busid_priv;
/* shutdown the current connection */
shutdown_busid(busid_priv);
busid_priv->sdev = NULL;
stub_device_free(sdev);
- if (busid_priv->status == STUB_BUSID_ALLOC) {
+ if (busid_priv->status == STUB_BUSID_ALLOC)
busid_priv->status = STUB_BUSID_ADDED;
- } else {
- busid_priv->status = STUB_BUSID_OTHER;
- del_match_busid((char *)udev_busid);
- }
+
+call_put_busid_priv:
+ put_busid_priv(busid_priv);
}
#ifdef CONFIG_PM
#define DRIVER_DESC "USB/IP Host Driver"
struct kmem_cache *stub_priv_cache;
+
/*
* busid_tables defines matching busids that usbip can grab. A user can change
* dynamically what device is locally used and what device is exported to a
static void init_busid_table(void)
{
+ int i;
+
/*
* This also sets the bus_table[i].status to
* STUB_BUSID_OTHER, which is 0.
memset(busid_table, 0, sizeof(busid_table));
spin_lock_init(&busid_table_lock);
+
+ for (i = 0; i < MAX_BUSID; i++)
+ spin_lock_init(&busid_table[i].busid_lock);
}
/*
int i;
int idx = -1;
- for (i = 0; i < MAX_BUSID; i++)
+ for (i = 0; i < MAX_BUSID; i++) {
+ spin_lock(&busid_table[i].busid_lock);
if (busid_table[i].name[0])
if (!strncmp(busid_table[i].name, busid, BUSID_SIZE)) {
idx = i;
+ spin_unlock(&busid_table[i].busid_lock);
break;
}
+ spin_unlock(&busid_table[i].busid_lock);
+ }
return idx;
}
+/* Returns holding busid_lock. Should call put_busid_priv() to unlock */
struct bus_id_priv *get_busid_priv(const char *busid)
{
int idx;
spin_lock(&busid_table_lock);
idx = get_busid_idx(busid);
- if (idx >= 0)
+ if (idx >= 0) {
bid = &(busid_table[idx]);
+ /* get busid_lock before returning */
+ spin_lock(&bid->busid_lock);
+ }
spin_unlock(&busid_table_lock);
return bid;
}
+void put_busid_priv(struct bus_id_priv *bid)
+{
+ if (bid)
+ spin_unlock(&bid->busid_lock);
+}
+
static int add_match_busid(char *busid)
{
int i;
goto out;
}
- for (i = 0; i < MAX_BUSID; i++)
+ for (i = 0; i < MAX_BUSID; i++) {
+ spin_lock(&busid_table[i].busid_lock);
if (!busid_table[i].name[0]) {
strlcpy(busid_table[i].name, busid, BUSID_SIZE);
if ((busid_table[i].status != STUB_BUSID_ALLOC) &&
(busid_table[i].status != STUB_BUSID_REMOV))
busid_table[i].status = STUB_BUSID_ADDED;
ret = 0;
+ spin_unlock(&busid_table[i].busid_lock);
break;
}
+ spin_unlock(&busid_table[i].busid_lock);
+ }
out:
spin_unlock(&busid_table_lock);
/* found */
ret = 0;
+ spin_lock(&busid_table[idx].busid_lock);
+
if (busid_table[idx].status == STUB_BUSID_OTHER)
memset(busid_table[idx].name, 0, BUSID_SIZE);
(busid_table[idx].status != STUB_BUSID_ADDED))
busid_table[idx].status = STUB_BUSID_REMOV;
+ spin_unlock(&busid_table[idx].busid_lock);
out:
spin_unlock(&busid_table_lock);
char *out = buf;
spin_lock(&busid_table_lock);
- for (i = 0; i < MAX_BUSID; i++)
+ for (i = 0; i < MAX_BUSID; i++) {
+ spin_lock(&busid_table[i].busid_lock);
if (busid_table[i].name[0])
out += sprintf(out, "%s ", busid_table[i].name);
+ spin_unlock(&busid_table[i].busid_lock);
+ }
spin_unlock(&busid_table_lock);
out += sprintf(out, "\n");
}
static DRIVER_ATTR_RW(match_busid);
+static int do_rebind(char *busid, struct bus_id_priv *busid_priv)
+{
+ int ret;
+
+ /* device_attach() callers should hold parent lock for USB */
+ if (busid_priv->udev->dev.parent)
+ device_lock(busid_priv->udev->dev.parent);
+ ret = device_attach(&busid_priv->udev->dev);
+ if (busid_priv->udev->dev.parent)
+ device_unlock(busid_priv->udev->dev.parent);
+ if (ret < 0) {
+ dev_err(&busid_priv->udev->dev, "rebind failed\n");
+ return ret;
+ }
+ return 0;
+}
+
+static void stub_device_rebind(void)
+{
+#if IS_MODULE(CONFIG_USBIP_HOST)
+ struct bus_id_priv *busid_priv;
+ int i;
+
+ /* update status to STUB_BUSID_OTHER so probe ignores the device */
+ spin_lock(&busid_table_lock);
+ for (i = 0; i < MAX_BUSID; i++) {
+ if (busid_table[i].name[0] &&
+ busid_table[i].shutdown_busid) {
+ busid_priv = &(busid_table[i]);
+ busid_priv->status = STUB_BUSID_OTHER;
+ }
+ }
+ spin_unlock(&busid_table_lock);
+
+ /* now run rebind - no need to hold locks. driver files are removed */
+ for (i = 0; i < MAX_BUSID; i++) {
+ if (busid_table[i].name[0] &&
+ busid_table[i].shutdown_busid) {
+ busid_priv = &(busid_table[i]);
+ do_rebind(busid_table[i].name, busid_priv);
+ }
+ }
+#endif
+}
+
static ssize_t rebind_store(struct device_driver *dev, const char *buf,
size_t count)
{
if (!bid)
return -ENODEV;
- /* device_attach() callers should hold parent lock for USB */
- if (bid->udev->dev.parent)
- device_lock(bid->udev->dev.parent);
- ret = device_attach(&bid->udev->dev);
- if (bid->udev->dev.parent)
- device_unlock(bid->udev->dev.parent);
- if (ret < 0) {
- dev_err(&bid->udev->dev, "rebind failed\n");
+ /* mark the device for deletion so probe ignores it during rescan */
+ bid->status = STUB_BUSID_OTHER;
+ /* release the busid lock */
+ put_busid_priv(bid);
+
+ ret = do_rebind((char *) buf, bid);
+ if (ret < 0)
return ret;
- }
+
+ /* delete device from busid_table */
+ del_match_busid((char *) buf);
return count;
}
*/
usb_deregister_device_driver(&stub_driver);
+ /* initiate scan to attach devices */
+ stub_device_rebind();
+
kmem_cache_destroy(stub_priv_cache);
}
return 0;
out_put_hidden_dir:
+ cancel_delayed_work_sync(&sbi->sync_work);
iput(sbi->hidden_dir);
out_put_root:
dput(sb->s_root);
u32 attributes;
u32 get_bar_attributes;
u32 set_bar_attributes;
- uint64_t romsize;
- void *romimage;
+ u64 romsize;
+ u32 romimage;
} efi_pci_io_protocol_32;
typedef struct {
u64 attributes;
u64 get_bar_attributes;
u64 set_bar_attributes;
- uint64_t romsize;
- void *romimage;
+ u64 romsize;
+ u64 romimage;
} efi_pci_io_protocol_64;
typedef struct {
return VM_FAULT_NOPAGE;
}
+static inline vm_fault_t vmf_error(int err)
+{
+ if (err == -ENOMEM)
+ return VM_FAULT_OOM;
+ return VM_FAULT_SIGBUS;
+}
+
struct page *follow_page_mask(struct vm_area_struct *vma,
unsigned long address, unsigned int foll_flags,
unsigned int *page_mask);
({ \
int i, ret = 1; \
for (i = 0; i < map_words(map); i++) { \
- if (((val1).x[i] & (val2).x[i]) != (val2).x[i]) { \
+ if (((val1).x[i] & (val2).x[i]) != (val3).x[i]) { \
ret = 0; \
break; \
} \
* tBERS (during an erase) which all of them are u64 values that cannot be
* divided by usual kernel macros and must be handled with the special
* DIV_ROUND_UP_ULL() macro.
+ *
+ * Cast to type of dividend is needed here to guarantee that the result won't
+ * be an unsigned long long when the dividend is an unsigned long (or smaller),
+ * which is what the compiler does when it sees ternary operator with 2
+ * different return types (picks the largest type to make sure there's no
+ * loss).
*/
-#define __DIVIDE(dividend, divisor) ({ \
- sizeof(dividend) == sizeof(u32) ? \
- DIV_ROUND_UP(dividend, divisor) : \
- DIV_ROUND_UP_ULL(dividend, divisor); \
- })
+#define __DIVIDE(dividend, divisor) ({ \
+ (__typeof__(dividend))(sizeof(dividend) <= sizeof(unsigned long) ? \
+ DIV_ROUND_UP(dividend, divisor) : \
+ DIV_ROUND_UP_ULL(dividend, divisor)); \
+ })
#define PSEC_TO_NSEC(x) __DIVIDE(x, 1000)
#define PSEC_TO_MSEC(x) __DIVIDE(x, 1000000000)
lock_release(&sem->rw_sem.dep_map, 1, ip);
#ifdef CONFIG_RWSEM_SPIN_ON_OWNER
if (!read)
- sem->rw_sem.owner = NULL;
+ sem->rw_sem.owner = RWSEM_OWNER_UNKNOWN;
#endif
}
bool read, unsigned long ip)
{
lock_acquire(&sem->rw_sem.dep_map, 0, 1, read, 1, NULL, ip);
+#ifdef CONFIG_RWSEM_SPIN_ON_OWNER
+ if (!read)
+ sem->rw_sem.owner = current;
+#endif
}
#endif
#endif
};
+/*
+ * Setting bit 0 of the owner field with other non-zero bits will indicate
+ * that the rwsem is writer-owned with an unknown owner.
+ */
+#define RWSEM_OWNER_UNKNOWN ((struct task_struct *)-1L)
+
extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
extern struct rw_semaphore *rwsem_down_read_failed_killable(struct rw_semaphore *sem);
extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
struct task_struct *owner;
bool ret = true;
+ BUILD_BUG_ON(!rwsem_has_anonymous_owner(RWSEM_OWNER_UNKNOWN));
+
if (need_resched())
return false;
rcu_read_lock();
owner = READ_ONCE(sem->owner);
- if (!rwsem_owner_is_writer(owner)) {
- /*
- * Don't spin if the rwsem is readers owned.
- */
- ret = !rwsem_owner_is_reader(owner);
+ if (!owner || !is_rwsem_owner_spinnable(owner)) {
+ ret = !owner; /* !owner is spinnable */
goto done;
}
{
struct task_struct *owner = READ_ONCE(sem->owner);
- if (!rwsem_owner_is_writer(owner))
- goto out;
+ if (!is_rwsem_owner_spinnable(owner))
+ return false;
rcu_read_lock();
- while (sem->owner == owner) {
+ while (owner && (READ_ONCE(sem->owner) == owner)) {
/*
* Ensure we emit the owner->on_cpu, dereference _after_
* checking sem->owner still matches owner, if that fails,
cpu_relax();
}
rcu_read_unlock();
-out:
+
/*
* If there is a new owner or the owner is not set, we continue
* spinning.
*/
- return !rwsem_owner_is_reader(READ_ONCE(sem->owner));
+ return is_rwsem_owner_spinnable(READ_ONCE(sem->owner));
}
static bool rwsem_optimistic_spin(struct rw_semaphore *sem)
EXPORT_SYMBOL(up_read_non_owner);
#endif
-
-
/* SPDX-License-Identifier: GPL-2.0 */
/*
* The owner field of the rw_semaphore structure will be set to
- * RWSEM_READ_OWNED when a reader grabs the lock. A writer will clear
+ * RWSEM_READER_OWNED when a reader grabs the lock. A writer will clear
* the owner field when it unlocks. A reader, on the other hand, will
* not touch the owner field when it unlocks.
*
- * In essence, the owner field now has the following 3 states:
+ * In essence, the owner field now has the following 4 states:
* 1) 0
* - lock is free or the owner hasn't set the field yet
* 2) RWSEM_READER_OWNED
* - lock is currently or previously owned by readers (lock is free
* or not set by owner yet)
- * 3) Other non-zero value
- * - a writer owns the lock
+ * 3) RWSEM_ANONYMOUSLY_OWNED bit set with some other bits set as well
+ * - lock is owned by an anonymous writer, so spinning on the lock
+ * owner should be disabled.
+ * 4) Other non-zero value
+ * - a writer owns the lock and other writers can spin on the lock owner.
*/
-#define RWSEM_READER_OWNED ((struct task_struct *)1UL)
+#define RWSEM_ANONYMOUSLY_OWNED (1UL << 0)
+#define RWSEM_READER_OWNED ((struct task_struct *)RWSEM_ANONYMOUSLY_OWNED)
#ifdef CONFIG_DEBUG_RWSEMS
# define DEBUG_RWSEMS_WARN_ON(c) DEBUG_LOCKS_WARN_ON(c)
WRITE_ONCE(sem->owner, RWSEM_READER_OWNED);
}
-static inline bool rwsem_owner_is_writer(struct task_struct *owner)
+/*
+ * Return true if the a rwsem waiter can spin on the rwsem's owner
+ * and steal the lock, i.e. the lock is not anonymously owned.
+ * N.B. !owner is considered spinnable.
+ */
+static inline bool is_rwsem_owner_spinnable(struct task_struct *owner)
{
- return owner && owner != RWSEM_READER_OWNED;
+ return !((unsigned long)owner & RWSEM_ANONYMOUSLY_OWNED);
}
-static inline bool rwsem_owner_is_reader(struct task_struct *owner)
+/*
+ * Return true if rwsem is owned by an anonymous writer or readers.
+ */
+static inline bool rwsem_has_anonymous_owner(struct task_struct *owner)
{
- return owner == RWSEM_READER_OWNED;
+ return (unsigned long)owner & RWSEM_ANONYMOUSLY_OWNED;
}
#else
static inline void rwsem_set_owner(struct rw_semaphore *sem)
static void __rcu **skip_siblings(struct radix_tree_node **nodep,
void __rcu **slot, struct radix_tree_iter *iter)
{
- void *sib = node_to_entry(slot - 1);
-
while (iter->index < iter->next_index) {
*nodep = rcu_dereference_raw(*slot);
- if (*nodep && *nodep != sib)
+ if (*nodep && !is_sibling_entry(iter->node, *nodep))
return slot;
slot++;
iter->index = __radix_tree_iter_add(iter, 1);
struct radix_tree_iter *iter, unsigned flags)
{
unsigned tag = flags & RADIX_TREE_ITER_TAG_MASK;
- struct radix_tree_node *node = rcu_dereference_raw(*slot);
+ struct radix_tree_node *node;
slot = skip_siblings(&node, slot, iter);
unsigned int start, nbits;
for (start = 0; start < 1024; start += 8) {
- memset(bmap1, 0x5a, sizeof(bmap1));
- memset(bmap2, 0x5a, sizeof(bmap2));
for (nbits = 0; nbits < 1024 - start; nbits += 8) {
+ memset(bmap1, 0x5a, sizeof(bmap1));
+ memset(bmap2, 0x5a, sizeof(bmap2));
+
bitmap_set(bmap1, start, nbits);
__bitmap_set(bmap2, start, nbits);
- if (!bitmap_equal(bmap1, bmap2, 1024))
+ if (!bitmap_equal(bmap1, bmap2, 1024)) {
printk("set not equal %d %d\n", start, nbits);
- if (!__bitmap_equal(bmap1, bmap2, 1024))
+ failed_tests++;
+ }
+ if (!__bitmap_equal(bmap1, bmap2, 1024)) {
printk("set not __equal %d %d\n", start, nbits);
+ failed_tests++;
+ }
bitmap_clear(bmap1, start, nbits);
__bitmap_clear(bmap2, start, nbits);
- if (!bitmap_equal(bmap1, bmap2, 1024))
+ if (!bitmap_equal(bmap1, bmap2, 1024)) {
printk("clear not equal %d %d\n", start, nbits);
- if (!__bitmap_equal(bmap1, bmap2, 1024))
+ failed_tests++;
+ }
+ if (!__bitmap_equal(bmap1, bmap2, 1024)) {
printk("clear not __equal %d %d\n", start,
nbits);
+ failed_tests++;
+ }
}
}
}
default n
depends on NO_BOOTMEM
depends on !FLATMEM
+ depends on !NEED_PER_CPU_KM
help
Ordinarily all struct pages are initialised during early boot in a
single thread. On very large machines this can take a considerable
static inline u64 file_mmap_size_max(struct file *file, struct inode *inode)
{
if (S_ISREG(inode->i_mode))
- return inode->i_sb->s_maxbytes;
+ return MAX_LFS_FILESIZE;
if (S_ISBLK(inode->i_mode))
return MAX_LFS_FILESIZE;
$(obj)/%.o: $(src)/%.c
$(CLANG) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(EXTRA_CFLAGS) -I$(obj) \
-I$(srctree)/tools/testing/selftests/bpf/ \
- -D__KERNEL__ -Wno-unused-value -Wno-pointer-sign \
+ -D__KERNEL__ -D__BPF_TRACING__ -Wno-unused-value -Wno-pointer-sign \
-D__TARGET_ARCH_$(ARCH) -Wno-compare-distinct-pointer-types \
-Wno-gnu-variable-sized-type-not-at-end \
-Wno-address-of-packed-member -Wno-tautological-compare \
#include <stdbool.h>
#define spinlock_t pthread_mutex_t
-#define DEFINE_SPINLOCK(x) pthread_mutex_t x = PTHREAD_MUTEX_INITIALIZER;
+#define DEFINE_SPINLOCK(x) pthread_mutex_t x = PTHREAD_MUTEX_INITIALIZER
#define __SPIN_LOCK_UNLOCKED(x) (pthread_mutex_t)PTHREAD_MUTEX_INITIALIZER
+#define spin_lock_init(x) pthread_mutex_init(x, NULL)
#define spin_lock_irqsave(x, f) (void)f, pthread_mutex_lock(x)
#define spin_unlock_irqrestore(x, f) (void)f, pthread_mutex_unlock(x)
return insn_offset_displacement(insn) + insn->displacement.nbytes;
}
+#define POP_SS_OPCODE 0x1f
+#define MOV_SREG_OPCODE 0x8e
+
+/*
+ * Intel SDM Vol.3A 6.8.3 states;
+ * "Any single-step trap that would be delivered following the MOV to SS
+ * instruction or POP to SS instruction (because EFLAGS.TF is 1) is
+ * suppressed."
+ * This function returns true if @insn is MOV SS or POP SS. On these
+ * instructions, single stepping is suppressed.
+ */
+static inline int insn_masking_exception(struct insn *insn)
+{
+ return insn->opcode.bytes[0] == POP_SS_OPCODE ||
+ (insn->opcode.bytes[0] == MOV_SREG_OPCODE &&
+ X86_MODRM_REG(insn->modrm.bytes[0]) == 2);
+}
+
#endif /* _ASM_X86_INSN_H */
return next;
}
+static struct instruction *next_insn_same_func(struct objtool_file *file,
+ struct instruction *insn)
+{
+ struct instruction *next = list_next_entry(insn, list);
+ struct symbol *func = insn->func;
+
+ if (!func)
+ return NULL;
+
+ if (&next->list != &file->insn_list && next->func == func)
+ return next;
+
+ /* Check if we're already in the subfunction: */
+ if (func == func->cfunc)
+ return NULL;
+
+ /* Move to the subfunction: */
+ return find_insn(file, func->cfunc->sec, func->cfunc->offset);
+}
+
+#define func_for_each_insn_all(file, func, insn) \
+ for (insn = find_insn(file, func->sec, func->offset); \
+ insn; \
+ insn = next_insn_same_func(file, insn))
+
#define func_for_each_insn(file, func, insn) \
for (insn = find_insn(file, func->sec, func->offset); \
insn && &insn->list != &file->insn_list && \
if (!strcmp(func->name, global_noreturns[i]))
return 1;
- if (!func->sec)
+ if (!func->len)
return 0;
- func_for_each_insn(file, func, insn) {
+ insn = find_insn(file, func->sec, func->offset);
+ if (!insn->func)
+ return 0;
+
+ func_for_each_insn_all(file, func, insn) {
empty = false;
if (insn->type == INSN_RETURN)
* case, the function's dead-end status depends on whether the target
* of the sibling call returns.
*/
- func_for_each_insn(file, func, insn) {
- if (insn->sec != func->sec ||
- insn->offset >= func->offset + func->len)
- break;
-
+ func_for_each_insn_all(file, func, insn) {
if (insn->type == INSN_JUMP_UNCONDITIONAL) {
struct instruction *dest = insn->jump_dest;
- struct symbol *dest_func;
if (!dest)
/* sibling call to another file */
return 0;
- if (dest->sec != func->sec ||
- dest->offset < func->offset ||
- dest->offset >= func->offset + func->len) {
- /* local sibling call */
- dest_func = find_symbol_by_offset(dest->sec,
- dest->offset);
- if (!dest_func)
- continue;
+ if (dest->func && dest->func->pfunc != insn->func->pfunc) {
+ /* local sibling call */
if (recursion == 5) {
- WARN_FUNC("infinite recursion (objtool bug!)",
- dest->sec, dest->offset);
- return -1;
+ /*
+ * Infinite recursion: two functions
+ * have sibling calls to each other.
+ * This is a very rare case. It means
+ * they aren't dead ends.
+ */
+ return 0;
}
- return __dead_end_function(file, dest_func,
+ return __dead_end_function(file, dest->func,
recursion + 1);
}
}
if (!ignore_func(file, func))
continue;
- func_for_each_insn(file, func, insn)
+ func_for_each_insn_all(file, func, insn)
insn->ignore = true;
}
}
return ret;
}
-static int add_switch_table(struct objtool_file *file, struct symbol *func,
- struct instruction *insn, struct rela *table,
- struct rela *next_table)
+static int add_switch_table(struct objtool_file *file, struct instruction *insn,
+ struct rela *table, struct rela *next_table)
{
struct rela *rela = table;
struct instruction *alt_insn;
struct alternative *alt;
+ struct symbol *pfunc = insn->func->pfunc;
+ unsigned int prev_offset = 0;
list_for_each_entry_from(rela, &file->rodata->rela->rela_list, list) {
if (rela == next_table)
break;
- if (rela->sym->sec != insn->sec ||
- rela->addend <= func->offset ||
- rela->addend >= func->offset + func->len)
+ /* Make sure the switch table entries are consecutive: */
+ if (prev_offset && rela->offset != prev_offset + 8)
break;
- alt_insn = find_insn(file, insn->sec, rela->addend);
- if (!alt_insn) {
- WARN("%s: can't find instruction at %s+0x%x",
- file->rodata->rela->name, insn->sec->name,
- rela->addend);
- return -1;
- }
+ /* Detect function pointers from contiguous objects: */
+ if (rela->sym->sec == pfunc->sec &&
+ rela->addend == pfunc->offset)
+ break;
+
+ alt_insn = find_insn(file, rela->sym->sec, rela->addend);
+ if (!alt_insn)
+ break;
+
+ /* Make sure the jmp dest is in the function or subfunction: */
+ if (alt_insn->func->pfunc != pfunc)
+ break;
alt = malloc(sizeof(*alt));
if (!alt) {
alt->insn = alt_insn;
list_add_tail(&alt->list, &insn->alts);
+ prev_offset = rela->offset;
+ }
+
+ if (!prev_offset) {
+ WARN_FUNC("can't find switch jump table",
+ insn->sec, insn->offset);
+ return -1;
}
return 0;
{
struct rela *text_rela, *rodata_rela;
struct instruction *orig_insn = insn;
+ unsigned long table_offset;
- text_rela = find_rela_by_dest_range(insn->sec, insn->offset, insn->len);
- if (text_rela && text_rela->sym == file->rodata->sym) {
- /* case 1 */
- rodata_rela = find_rela_by_dest(file->rodata,
- text_rela->addend);
- if (rodata_rela)
- return rodata_rela;
-
- /* case 2 */
- rodata_rela = find_rela_by_dest(file->rodata,
- text_rela->addend + 4);
- if (!rodata_rela)
- return NULL;
-
- file->ignore_unreachables = true;
- return rodata_rela;
- }
-
- /* case 3 */
/*
* Backward search using the @first_jump_src links, these help avoid
* much of the 'in between' code. Which avoids us getting confused by
* it.
*/
- for (insn = list_prev_entry(insn, list);
-
+ for (;
&insn->list != &file->insn_list &&
insn->sec == func->sec &&
insn->offset >= func->offset;
insn = insn->first_jump_src ?: list_prev_entry(insn, list)) {
- if (insn->type == INSN_JUMP_DYNAMIC)
+ if (insn != orig_insn && insn->type == INSN_JUMP_DYNAMIC)
break;
/* allow small jumps within the range */
if (!text_rela || text_rela->sym != file->rodata->sym)
continue;
+ table_offset = text_rela->addend;
+ if (text_rela->type == R_X86_64_PC32)
+ table_offset += 4;
+
/*
* Make sure the .rodata address isn't associated with a
* symbol. gcc jump tables are anonymous data.
*/
- if (find_symbol_containing(file->rodata, text_rela->addend))
+ if (find_symbol_containing(file->rodata, table_offset))
continue;
- rodata_rela = find_rela_by_dest(file->rodata, text_rela->addend);
- if (!rodata_rela)
- continue;
+ rodata_rela = find_rela_by_dest(file->rodata, table_offset);
+ if (rodata_rela) {
+ /*
+ * Use of RIP-relative switch jumps is quite rare, and
+ * indicates a rare GCC quirk/bug which can leave dead
+ * code behind.
+ */
+ if (text_rela->type == R_X86_64_PC32)
+ file->ignore_unreachables = true;
- return rodata_rela;
+ return rodata_rela;
+ }
}
return NULL;
struct rela *rela, *prev_rela = NULL;
int ret;
- func_for_each_insn(file, func, insn) {
+ func_for_each_insn_all(file, func, insn) {
if (!last)
last = insn;
* the beginning of another switch table in the same function.
*/
if (prev_jump) {
- ret = add_switch_table(file, func, prev_jump, prev_rela,
- rela);
+ ret = add_switch_table(file, prev_jump, prev_rela, rela);
if (ret)
return ret;
}
}
if (prev_jump) {
- ret = add_switch_table(file, func, prev_jump, prev_rela, NULL);
+ ret = add_switch_table(file, prev_jump, prev_rela, NULL);
if (ret)
return ret;
}
while (1) {
next_insn = next_insn_same_sec(file, insn);
-
- if (file->c_file && func && insn->func && func != insn->func) {
+ if (file->c_file && func && insn->func && func != insn->func->pfunc) {
WARN("%s() falls through to next function %s()",
func->name, insn->func->name);
return 1;
}
- if (insn->func)
- func = insn->func;
+ func = insn->func ? insn->func->pfunc : NULL;
if (func && insn->ignore) {
WARN_FUNC("BUG: why am I validating an ignored function?",
i = insn;
save_insn = NULL;
- func_for_each_insn_continue_reverse(file, func, i) {
+ func_for_each_insn_continue_reverse(file, insn->func, i) {
if (i->save) {
save_insn = i;
break;
case INSN_JUMP_UNCONDITIONAL:
if (insn->jump_dest &&
(!func || !insn->jump_dest->func ||
- func == insn->jump_dest->func)) {
+ insn->jump_dest->func->pfunc == func)) {
ret = validate_branch(file, insn->jump_dest,
state);
if (ret)
for_each_sec(file, sec) {
list_for_each_entry(func, &sec->symbol_list, list) {
- if (func->type != STT_FUNC)
+ if (func->type != STT_FUNC || func->pfunc != func)
continue;
insn = find_insn(file, sec, func->offset);
return NULL;
}
+struct symbol *find_symbol_by_name(struct elf *elf, const char *name)
+{
+ struct section *sec;
+ struct symbol *sym;
+
+ list_for_each_entry(sec, &elf->sections, list)
+ list_for_each_entry(sym, &sec->symbol_list, list)
+ if (!strcmp(sym->name, name))
+ return sym;
+
+ return NULL;
+}
+
struct symbol *find_symbol_containing(struct section *sec, unsigned long offset)
{
struct symbol *sym;
static int read_symbols(struct elf *elf)
{
- struct section *symtab;
- struct symbol *sym;
+ struct section *symtab, *sec;
+ struct symbol *sym, *pfunc;
struct list_head *entry, *tmp;
int symbols_nr, i;
+ char *coldstr;
symtab = find_section_by_name(elf, ".symtab");
if (!symtab) {
hash_add(sym->sec->symbol_hash, &sym->hash, sym->idx);
}
+ /* Create parent/child links for any cold subfunctions */
+ list_for_each_entry(sec, &elf->sections, list) {
+ list_for_each_entry(sym, &sec->symbol_list, list) {
+ if (sym->type != STT_FUNC)
+ continue;
+ sym->pfunc = sym->cfunc = sym;
+ coldstr = strstr(sym->name, ".cold.");
+ if (coldstr) {
+ coldstr[0] = '\0';
+ pfunc = find_symbol_by_name(elf, sym->name);
+ coldstr[0] = '.';
+
+ if (!pfunc) {
+ WARN("%s(): can't find parent function",
+ sym->name);
+ goto err;
+ }
+
+ sym->pfunc = pfunc;
+ pfunc->cfunc = sym;
+ }
+ }
+ }
+
return 0;
err:
unsigned char bind, type;
unsigned long offset;
unsigned int len;
+ struct symbol *pfunc, *cfunc;
};
struct rela {
struct elf *elf_open(const char *name, int flags);
struct section *find_section_by_name(struct elf *elf, const char *name);
struct symbol *find_symbol_by_offset(struct section *sec, unsigned long offset);
+struct symbol *find_symbol_by_name(struct elf *elf, const char *name);
struct symbol *find_symbol_containing(struct section *sec, unsigned long offset);
struct rela *find_rela_by_dest(struct section *sec, unsigned long offset);
struct rela *find_rela_by_dest_range(struct section *sec, unsigned long offset,
trace_libc_inet_pton_backtrace() {
idx=0
expected[0]="ping[][0-9 \.:]+probe_libc:inet_pton: \([[:xdigit:]]+\)"
- expected[1]=".*inet_pton[[:space:]]\($libc\)$"
+ expected[1]=".*inet_pton[[:space:]]\($libc|inlined\)$"
case "$(uname -m)" in
s390x)
eventattr='call-graph=dwarf,max-stack=4'
max_percent = sample->percent;
}
+ if (al->samples_nr > nr_percent)
+ nr_percent = al->samples_nr;
+
if (max_percent < min_pcnt)
return -1;
for (i = 0; i < aux->num_cpu; i++)
zfree(&aux->metadata[i]);
+ thread__zput(aux->unknown_thread);
zfree(&aux->metadata);
zfree(&aux);
}
return buff->len;
}
-static void cs_etm__set_pid_tid_cpu(struct cs_etm_auxtrace *etm,
- struct auxtrace_queue *queue)
+static void cs_etm__set_pid_tid_cpu(struct cs_etm_auxtrace *etm,
+ struct auxtrace_queue *queue)
{
struct cs_etm_queue *etmq = queue->priv;
etm->auxtrace.free = cs_etm__free;
session->auxtrace = &etm->auxtrace;
+ etm->unknown_thread = thread__new(999999999, 999999999);
+ if (!etm->unknown_thread)
+ goto err_free_queues;
+
+ /*
+ * Initialize list node so that at thread__zput() we can avoid
+ * segmentation fault at list_del_init().
+ */
+ INIT_LIST_HEAD(&etm->unknown_thread->node);
+
+ err = thread__set_comm(etm->unknown_thread, "unknown", 0);
+ if (err)
+ goto err_delete_thread;
+
+ if (thread__init_map_groups(etm->unknown_thread, etm->machine))
+ goto err_delete_thread;
+
if (dump_trace) {
cs_etm__print_auxtrace_info(auxtrace_info->priv, num_cpu);
return 0;
err = cs_etm__synth_events(etm, session);
if (err)
- goto err_free_queues;
+ goto err_delete_thread;
err = auxtrace_queues__process_index(&etm->queues, session);
if (err)
- goto err_free_queues;
+ goto err_delete_thread;
etm->data_queued = etm->queues.populated;
return 0;
+err_delete_thread:
+ thread__zput(etm->unknown_thread);
err_free_queues:
auxtrace_queues__free(&etm->queues);
session->auxtrace = NULL;
struct perf_evsel *last;
if (list_empty(&parse_state.list)) {
- WARN_ONCE(true, "WARNING: event parser found nothing");
+ WARN_ONCE(true, "WARNING: event parser found nothing\n");
return -1;
}
LDFLAGS += -m32
endif
-targets: mapshift $(TARGETS)
+targets: generated/map-shift.h $(TARGETS)
main: $(OFILES)
idr.c: ../../../lib/idr.c
sed -e 's/^static //' -e 's/__always_inline //' -e 's/inline //' < $< > $@
-.PHONY: mapshift
-
-mapshift:
+generated/map-shift.h:
@if ! grep -qws $(SHIFT) generated/map-shift.h; then \
echo "#define RADIX_TREE_MAP_SHIFT $(SHIFT)" > \
generated/map-shift.h; \
#include <linux/radix-tree.h>
#include <linux/slab.h>
#include <linux/errno.h>
+#include <pthread.h>
#include "test.h"
item_kill_tree(&tree);
}
+bool stop_iteration = false;
+
+static void *creator_func(void *ptr)
+{
+ /* 'order' is set up to ensure we have sibling entries */
+ unsigned int order = RADIX_TREE_MAP_SHIFT - 1;
+ struct radix_tree_root *tree = ptr;
+ int i;
+
+ for (i = 0; i < 10000; i++) {
+ item_insert_order(tree, 0, order);
+ item_delete_rcu(tree, 0);
+ }
+
+ stop_iteration = true;
+ return NULL;
+}
+
+static void *iterator_func(void *ptr)
+{
+ struct radix_tree_root *tree = ptr;
+ struct radix_tree_iter iter;
+ struct item *item;
+ void **slot;
+
+ while (!stop_iteration) {
+ rcu_read_lock();
+ radix_tree_for_each_slot(slot, tree, &iter, 0) {
+ item = radix_tree_deref_slot(slot);
+
+ if (!item)
+ continue;
+ if (radix_tree_deref_retry(item)) {
+ slot = radix_tree_iter_retry(&iter);
+ continue;
+ }
+
+ item_sanity(item, iter.index);
+ }
+ rcu_read_unlock();
+ }
+ return NULL;
+}
+
+static void multiorder_iteration_race(void)
+{
+ const int num_threads = sysconf(_SC_NPROCESSORS_ONLN);
+ pthread_t worker_thread[num_threads];
+ RADIX_TREE(tree, GFP_KERNEL);
+ int i;
+
+ pthread_create(&worker_thread[0], NULL, &creator_func, &tree);
+ for (i = 1; i < num_threads; i++)
+ pthread_create(&worker_thread[i], NULL, &iterator_func, &tree);
+
+ for (i = 0; i < num_threads; i++)
+ pthread_join(worker_thread[i], NULL);
+
+ item_kill_tree(&tree);
+}
+
void multiorder_checks(void)
{
int i;
multiorder_join();
multiorder_split();
multiorder_account();
+ multiorder_iteration_race();
radix_tree_cpu_dead(0);
}
return 0;
}
+static void item_free_rcu(struct rcu_head *head)
+{
+ struct item *item = container_of(head, struct item, rcu_head);
+
+ free(item);
+}
+
+int item_delete_rcu(struct radix_tree_root *root, unsigned long index)
+{
+ struct item *item = radix_tree_delete(root, index);
+
+ if (item) {
+ item_sanity(item, index);
+ call_rcu(&item->rcu_head, item_free_rcu);
+ return 1;
+ }
+ return 0;
+}
+
void item_check_present(struct radix_tree_root *root, unsigned long index)
{
struct item *item;
#include <linux/rcupdate.h>
struct item {
+ struct rcu_head rcu_head;
unsigned long index;
unsigned int order;
};
struct item *item_create(unsigned long index, unsigned int order);
int __item_insert(struct radix_tree_root *root, struct item *item);
int item_insert(struct radix_tree_root *root, unsigned long index);
+void item_sanity(struct item *item, unsigned long index);
int item_insert_order(struct radix_tree_root *root, unsigned long index,
unsigned order);
int item_delete(struct radix_tree_root *root, unsigned long index);
+int item_delete_rcu(struct radix_tree_root *root, unsigned long index);
struct item *item_lookup(struct radix_tree_root *root, unsigned long index);
void item_check_present(struct radix_tree_root *root, unsigned long index);
projects / linux-2.6-block.git / commitdiff