regulator: mp8859: Support status and error readback

The MP8859 can report if it is in regulation and detect over temperature
conditions, report this information via the relevant regulator API
calls.

Tested-by: Markus Reichl <m.reichl@fivetechno.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/r/20240225-regulator-mp8859-v1-6-68ee2c839ded@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/regulator/mp8859.c b/drivers/regulator/mp8859.c
index 87ef34875be19570cfccde7890af327e09fa48d3..fc1636d69bca9566c3b438385c93923cd0d917a3 100644 (file)
--- a/drivers/regulator/mp8859.c
+++ b/drivers/regulator/mp8859.c
@@ -39,6 +39,11 @@
 #define MP8859_DISCHG_EN_MASK          0x10
 #define MP8859_MODE_MASK               0x08
 
+#define MP8859_PG_MASK                 0x80
+#define MP8859_OTP_MASK                        0x40
+#define MP8859_OTW_MASK                        0x20
+#define MP8859_CC_CV_MASK              0x10
+
 static int mp8859_set_voltage_sel(struct regulator_dev *rdev, unsigned int sel)
 {
        int ret;
@@ -112,6 +117,58 @@ static int mp8859_set_mode(struct regulator_dev *rdev, unsigned int mode)
                                  MP8859_MODE_MASK, val);
 }
 
+static int mp8859_get_status(struct regulator_dev *rdev)
+{
+       unsigned int val;
+       int ret;
+
+       /* Output status is only meaingful when enabled */
+       ret = regmap_read(rdev->regmap, MP8859_CTL1_REG, &val);
+       if (ret != 0)
+               return ret;
+       if (!(val & MP8859_ENABLE_MASK))
+               return REGULATOR_STATUS_UNDEFINED;
+
+       ret = regmap_read(rdev->regmap, MP8859_STATUS_REG, &val);
+       if (ret != 0)
+               return ret;
+
+       if (val & MP8859_PG_MASK)
+               return REGULATOR_STATUS_ON;
+       else
+               return REGULATOR_STATUS_ERROR;
+}
+
+static int mp8859_get_error_flags(struct regulator_dev *rdev,
+                                 unsigned int *flags)
+{
+       unsigned int status, enabled;
+       int ret;
+
+       *flags = 0;
+
+       /* Output status is only meaingful when enabled */
+       ret = regmap_read(rdev->regmap, MP8859_CTL1_REG, &enabled);
+       if (ret != 0)
+               return ret;
+       enabled &= MP8859_ENABLE_MASK;
+
+       ret = regmap_read(rdev->regmap, MP8859_STATUS_REG, &status);
+       if (ret != 0)
+               return ret;
+
+       if (enabled && !(status & MP8859_PG_MASK))
+               status |= REGULATOR_ERROR_FAIL;
+       if (status & MP8859_OTP_MASK)
+               status |= REGULATOR_ERROR_OVER_TEMP;
+       if (status & MP8859_OTW_MASK)
+               status |= REGULATOR_ERROR_OVER_TEMP_WARN;
+       if (status & MP8859_CC_CV_MASK)
+               status |= REGULATOR_ERROR_OVER_CURRENT;
+
+       return 0;
+}
+
 static const struct linear_range mp8859_dcdc_ranges[] = {
        REGULATOR_LINEAR_RANGE(0, VOL_MIN_IDX, VOL_MAX_IDX, 10000),
 };
@@ -169,6 +226,8 @@ static const struct regulator_ops mp8859_ops = {
        .set_mode = mp8859_set_mode,
        .get_mode = mp8859_get_mode,
        .set_active_discharge = regulator_set_active_discharge_regmap,
+       .get_status = mp8859_get_status,
+       .get_error_flags = mp8859_get_error_flags,
 };
 
 static const struct regulator_desc mp8859_regulators[] = {