Blackfin SPI Driver: Add GPIO controlled SPI Slave Select support
authorMichael Hennerich <michael.hennerich@analog.com>
Tue, 7 Apr 2009 02:00:51 +0000 (19:00 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Tue, 7 Apr 2009 15:31:06 +0000 (08:31 -0700)
Add support for GPIO controlled SPI Chip Selects.  To make use of this
feature, set chip_select = 0 and add a proper cs_gpio to your
controller_data.

struct spi_board_info
        .chip_select = 0

struct bfin5xx_spi_chip
        .cs_gpio = GPIO_P###

There are various SPI devices that require SPI MODE_0, and need to have
the Chip Selects asserted during the entire transfer.  Consider using
SPI_MODE_3 (SPI_CPHA | SPI_CPOL) if your device allows it.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/blackfin/include/asm/bfin5xx_spi.h
drivers/spi/spi_bfin5xx.c

index ea2d24af9542dfc5db9cbdfc0ee5e31db12d59c5..8c5f8a977a66b851d1a854e21825f9e23acd4bd5 100644 (file)
@@ -124,6 +124,7 @@ struct bfin5xx_spi_chip {
        u8 bits_per_word;
        u8 cs_change_per_word;
        u16 cs_chg_udelay; /* Some devices require 16-bit delays */
+       u32 cs_gpio;
 };
 
 #endif /* _SPI_CHANNEL_H_ */
index 53819c961a3160fbb3fcbcddf098f2f6a363c7da..6aa084e445e6ed9b9eba449ef5ced969c94eeb61 100644 (file)
@@ -111,6 +111,7 @@ struct chip_data {
        u8 bits_per_word;       /* 8 or 16 */
        u8 cs_change_per_word;
        u16 cs_chg_udelay;      /* Some devices require > 255usec delay */
+       u32 cs_gpio;
        void (*write) (struct driver_data *);
        void (*read) (struct driver_data *);
        void (*duplex) (struct driver_data *);
@@ -177,22 +178,30 @@ static int bfin_spi_flush(struct driver_data *drv_data)
 /* Chip select operation functions for cs_change flag */
 static void bfin_spi_cs_active(struct driver_data *drv_data, struct chip_data *chip)
 {
-       u16 flag = read_FLAG(drv_data);
+       if (likely(chip->chip_select_num)) {
+               u16 flag = read_FLAG(drv_data);
 
-       flag |= chip->flag;
-       flag &= ~(chip->flag << 8);
+               flag |= chip->flag;
+               flag &= ~(chip->flag << 8);
 
-       write_FLAG(drv_data, flag);
+               write_FLAG(drv_data, flag);
+       } else {
+               gpio_set_value(chip->cs_gpio, 0);
+       }
 }
 
 static void bfin_spi_cs_deactive(struct driver_data *drv_data, struct chip_data *chip)
 {
-       u16 flag = read_FLAG(drv_data);
+       if (likely(chip->chip_select_num)) {
+               u16 flag = read_FLAG(drv_data);
 
-       flag &= ~chip->flag;
-       flag |= (chip->flag << 8);
+               flag &= ~chip->flag;
+               flag |= (chip->flag << 8);
 
-       write_FLAG(drv_data, flag);
+               write_FLAG(drv_data, flag);
+       } else {
+               gpio_set_value(chip->cs_gpio, 1);
+       }
 
        /* Move delay here for consistency */
        if (chip->cs_chg_udelay)
@@ -1036,6 +1045,7 @@ static int bfin_spi_setup(struct spi_device *spi)
        struct bfin5xx_spi_chip *chip_info = NULL;
        struct chip_data *chip;
        struct driver_data *drv_data = spi_master_get_devdata(spi->master);
+       int ret;
 
        /* Abort device setup if requested features are not supported */
        if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST)) {
@@ -1081,6 +1091,7 @@ static int bfin_spi_setup(struct spi_device *spi)
                chip->bits_per_word = chip_info->bits_per_word;
                chip->cs_change_per_word = chip_info->cs_change_per_word;
                chip->cs_chg_udelay = chip_info->cs_chg_udelay;
+               chip->cs_gpio = chip_info->cs_gpio;
        }
 
        /* translate common spi framework into our register */
@@ -1121,6 +1132,16 @@ static int bfin_spi_setup(struct spi_device *spi)
        chip->flag = 1 << (spi->chip_select);
        chip->chip_select_num = spi->chip_select;
 
+       if (chip->chip_select_num == 0) {
+               ret = gpio_request(chip->cs_gpio, spi->modalias);
+               if (ret) {
+                       if (drv_data->dma_requested)
+                               free_dma(drv_data->dma_channel);
+                       return ret;
+               }
+               gpio_direction_output(chip->cs_gpio, 1);
+       }
+
        switch (chip->bits_per_word) {
        case 8:
                chip->n_bytes = 1;
@@ -1186,6 +1207,9 @@ static void bfin_spi_cleanup(struct spi_device *spi)
                peripheral_free(ssel[spi->master->bus_num]
                                        [chip->chip_select_num-1]);
 
+       if (chip->chip_select_num == 0)
+               gpio_free(chip->cs_gpio);
+
        kfree(chip);
 }