media: i2c: gc2145: use CCI_REG16_LE for little-endian registers

Use CCI_REG16_LE macro in order to access little-endian
encoded registers of the P3 (CSI) section.

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

diff --git a/drivers/media/i2c/gc2145.c b/drivers/media/i2c/gc2145.c
index ef631c86080c70f9bf95a1f443636ab392660710..667bb756d05626cf6072374028f7cec333310920 100644 (file)
--- a/drivers/media/i2c/gc2145.c
+++ b/drivers/media/i2c/gc2145.c
@@ -68,8 +68,7 @@
 #define GC2145_DPHY_CLK_DELAY          BIT(4)
 #define GC2145_DPHY_LANE0_DELAY                BIT(5)
 #define GC2145_DPHY_LANE1_DELAY                BIT(6)
-#define GC2145_REG_FIFO_FULL_LVL_LOW   CCI_REG8(0x04)
-#define GC2145_REG_FIFO_FULL_LVL_HIGH  CCI_REG8(0x05)
+#define GC2145_REG_FIFO_FULL_LVL       CCI_REG16_LE(0x04)
 #define GC2145_REG_FIFO_MODE           CCI_REG8(0x06)
 #define GC2145_FIFO_MODE_READ_GATE     BIT(3)
 #define GC2145_FIFO_MODE_MIPI_CLK_MODULE       BIT(7)
@@ -79,8 +78,7 @@
 #define GC2145_CSI2_MODE_MIPI_EN       BIT(4)
 #define GC2145_CSI2_MODE_EN            BIT(7)
 #define GC2145_REG_MIPI_DT     CCI_REG8(0x11)
-#define GC2145_REG_LWC_LOW     CCI_REG8(0x12)
-#define GC2145_REG_LWC_HIGH    CCI_REG8(0x13)
+#define GC2145_REG_LWC         CCI_REG16_LE(0x12)
 #define GC2145_REG_DPHY_MODE   CCI_REG8(0x15)
 #define GC2145_DPHY_MODE_TRIGGER_PROG  BIT(4)
 #define GC2145_REG_FIFO_GATE_MODE      CCI_REG8(0x17)
@@ -861,8 +859,7 @@ static int gc2145_config_mipi_mode(struct gc2145 *gc2145,
        else
                lwc = gc2145->mode->width;
 
-       cci_write(gc2145->regmap, GC2145_REG_LWC_HIGH, lwc >> 8, &ret);
-       cci_write(gc2145->regmap, GC2145_REG_LWC_LOW, lwc & 0xff, &ret);
+       cci_write(gc2145->regmap, GC2145_REG_LWC, lwc, &ret);
 
        /*
         * Adjust the MIPI FIFO Full Level
@@ -879,10 +876,8 @@ static int gc2145_config_mipi_mode(struct gc2145 *gc2145,
                fifo_full_lvl = 0x0190;
        }
 
-       cci_write(gc2145->regmap, GC2145_REG_FIFO_FULL_LVL_HIGH,
-                 fifo_full_lvl >> 8, &ret);
-       cci_write(gc2145->regmap, GC2145_REG_FIFO_FULL_LVL_LOW,
-                 fifo_full_lvl & 0xff, &ret);
+       cci_write(gc2145->regmap, GC2145_REG_FIFO_FULL_LVL,
+                 fifo_full_lvl, &ret);
 
        /*
         * Set the FIFO gate mode / MIPI wdiv set: