rt2x00: Data and desc pointer initialization
authorIvo van Doorn <ivdoorn@gmail.com>
Thu, 10 Jan 2008 21:02:44 +0000 (22:02 +0100)
committerDavid S. Miller <davem@davemloft.net>
Mon, 28 Jan 2008 23:09:47 +0000 (15:09 -0800)
rt2500usb and rt73usb data and desc pointer initialization
was incorrect because it was using uninitialized variables
to determine the length.

In addition rt2500usb used skb_pull and removed the ieee80211
from each received frame instead of using skb_trim to remove
the device descriptor from the frame.

Finally this also fixes the descriptor override when 4 byte
aligning occured. We still need a completely valid descriptor
when using the TX/RX dumping capabilities in debugfs.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/rt2x00/rt2500usb.c
drivers/net/wireless/rt2x00/rt2x00usb.c
drivers/net/wireless/rt2x00/rt73usb.c

index 1933113d7bafed689c58b75415ae8f24d3c47a6a..86ded4066f5bbcc6e9d466b800b994ce329162ad 100644 (file)
@@ -1139,16 +1139,13 @@ static void rt2500usb_fill_rxdone(struct data_entry *entry,
        desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
        desc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS);
 
-       /*
-        * Trim the skb to clear the descriptor area.
-        */
-       skb_pull(entry->skb, entry->ring->desc_size);
-
        /*
         * Set descriptor and data pointer.
         */
-       skbdesc->desc = entry->skb->data + skbdesc->data_len;
+       skbdesc->desc = entry->skb->data + desc->size;
+       skbdesc->desc_len = entry->ring->desc_size;
        skbdesc->data = entry->skb->data;
+       skbdesc->data_len = desc->size;
 }
 
 /*
index d7d3a271b1b0c1b8a0a6c8ec70eeaf93d2ced544..a52939aa38afcdc08c8d4fc698cee2983a659c07 100644 (file)
@@ -257,6 +257,13 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb)
        if (urb->actual_length < entry->ring->desc_size || urb->status)
                goto skip_entry;
 
+       /*
+        * Fill in skb descriptor
+        */
+       skbdesc = get_skb_desc(entry->skb);
+       skbdesc->ring = ring;
+       skbdesc->entry = entry;
+
        memset(&desc, 0, sizeof(desc));
        rt2x00dev->ops->lib->fill_rxdone(entry, &desc);
 
@@ -283,9 +290,6 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb)
        /*
         * The data behind the ieee80211 header must be
         * aligned on a 4 byte boundary.
-        * After that trim the entire buffer down to only
-        * contain the valid frame data excluding the device
-        * descriptor.
         */
        hdr = (struct ieee80211_hdr *)entry->skb->data;
        header_size =
@@ -295,16 +299,17 @@ static void rt2x00usb_interrupt_rxdone(struct urb *urb)
                skb_push(entry->skb, 2);
                memmove(entry->skb->data, entry->skb->data + 2, skb->len - 2);
        }
-       skb_trim(entry->skb, desc.size);
 
        /*
-        * Fill in skb descriptor
+        * Trim the entire buffer down to only contain the valid frame data
+        * excluding the device descriptor. The position of the descriptor
+        * varies. This means that we should check where the descriptor is
+        * and decide if we need to pull the data pointer to exclude the
+        * device descriptor.
         */
-       skbdesc = get_skb_desc(entry->skb);
-       skbdesc->desc_len = entry->ring->desc_size;
-       skbdesc->data_len = entry->skb->len;
-       skbdesc->ring = ring;
-       skbdesc->entry = entry;
+       if (skbdesc->data > skbdesc->desc)
+               skb_pull(entry->skb, skbdesc->desc_len);
+       skb_trim(entry->skb, desc.size);
 
        /*
         * Send the frame to rt2x00lib for further processing.
index f9518764aeb062172e3343274a5e6af7efc7630f..4d576ab3e7f984f503608696d2112eb7d1793f54 100644 (file)
@@ -1397,16 +1397,13 @@ static void rt73usb_fill_rxdone(struct data_entry *entry,
        desc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
        desc->my_bss = !!rt2x00_get_field32(word0, RXD_W0_MY_BSS);
 
-       /*
-        * Pull the skb to clear the descriptor area.
-        */
-       skb_pull(entry->skb, entry->ring->desc_size);
-
        /*
         * Set descriptor and data pointer.
         */
-       skbdesc->desc = entry->skb->data - skbdesc->desc_len;
-       skbdesc->data = entry->skb->data;
+       skbdesc->desc = entry->skb->data;
+       skbdesc->desc_len = entry->ring->desc_size;
+       skbdesc->data = entry->skb->data + entry->ring->desc_size;
+       skbdesc->data_len = desc->size;
 }
 
 /*