regulator: ab8500: Add mode operation for v-amic
authorLee Jones <lee.jones@linaro.org>
Tue, 2 Apr 2013 12:24:12 +0000 (13:24 +0100)
committerMark Brown <broonie@opensource.wolfsonmicro.com>
Tue, 2 Apr 2013 22:01:43 +0000 (23:01 +0100)
v-amic1 and v-amic2 regulators have dedicated mode registers
and share the same mode bit. This patch adds special handling
for those regulators.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
arch/arm/mach-ux500/board-mop500-regulators.c
drivers/regulator/ab8500.c

index 62b4aa4cbfb38f0782003d35df8ed5991606be77..832966311c293f8a4e1755e92842aac573cbae2d 100644 (file)
@@ -877,7 +877,10 @@ struct regulator_init_data ab8505_regulators[AB8505_NUM_REGULATORS] = {
        [AB8505_LDO_ANAMIC1] = {
                .constraints = {
                        .name = "V-AMIC1",
-                       .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+                       .valid_ops_mask = REGULATOR_CHANGE_STATUS |
+                                         REGULATOR_CHANGE_MODE,
+                       .valid_modes_mask = REGULATOR_MODE_NORMAL |
+                                           REGULATOR_MODE_IDLE,
                },
                .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers),
                .consumer_supplies = ab8500_vamic1_consumers,
@@ -886,7 +889,10 @@ struct regulator_init_data ab8505_regulators[AB8505_NUM_REGULATORS] = {
        [AB8505_LDO_ANAMIC2] = {
                .constraints = {
                        .name = "V-AMIC2",
-                       .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+                       .valid_ops_mask = REGULATOR_CHANGE_STATUS |
+                                         REGULATOR_CHANGE_MODE,
+                       .valid_modes_mask = REGULATOR_MODE_NORMAL |
+                                           REGULATOR_MODE_IDLE,
                },
                .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers),
                .consumer_supplies = ab8500_vamic2_consumers,
index 6dae5dfb9fded07cfc9739c0867ab72d185fc0fb..ac89439a4f9a41c27c5755546a547c79f9176802 100644 (file)
 #include <linux/regulator/ab8500.h>
 #include <linux/slab.h>
 
+/**
+ * struct ab8500_shared_mode - is used when mode is shared between
+ * two regulators.
+ * @shared_regulator: pointer to the other sharing regulator
+ * @lp_mode_req: low power mode requested by this regulator
+ */
+struct ab8500_shared_mode {
+       struct ab8500_regulator_info *shared_regulator;
+       bool lp_mode_req;
+};
+
 /**
  * struct ab8500_regulator_info - ab8500 regulator information
  * @dev: device pointer
  * @desc: regulator description
  * @regulator_dev: regulator device
+ * @shared_mode: used when mode is shared between two regulators
  * @is_enabled: status of regulator (on/off)
  * @load_lp_uA: maximum load in idle (low power) mode
  * @update_bank: bank to control on/off
  * @update_val: bits holding the regulator current mode
  * @update_val_idle: bits to enable the regulator in idle (low power) mode
  * @update_val_normal: bits to enable the regulator in normal (high power) mode
+ * @mode_bank: bank with location of mode register
+ * @mode_reg: mode register
+ * @mode_mask: mask for setting mode
+ * @mode_val_idle: mode setting for low power
+ * @mode_val_normal: mode setting for normal power
  * @voltage_bank: bank to control regulator voltage
  * @voltage_reg: register to control regulator voltage
  * @voltage_mask: mask to control regulator voltage
@@ -51,6 +68,7 @@ struct ab8500_regulator_info {
        struct device           *dev;
        struct regulator_desc   desc;
        struct regulator_dev    *regulator;
+       struct ab8500_shared_mode *shared_mode;
        bool is_enabled;
        int load_lp_uA;
        u8 update_bank;
@@ -59,6 +77,11 @@ struct ab8500_regulator_info {
        u8 update_val;
        u8 update_val_idle;
        u8 update_val_normal;
+       u8 mode_bank;
+       u8 mode_reg;
+       u8 mode_mask;
+       u8 mode_val_idle;
+       u8 mode_val_normal;
        u8 voltage_bank;
        u8 voltage_reg;
        u8 voltage_mask;
@@ -189,6 +212,10 @@ static const unsigned int ldo_vaudio_voltages[] = {
        2600000,        /* Duplicated in Vaudio and IsoUicc Control register. */
 };
 
+static DEFINE_MUTEX(shared_mode_mutex);
+static struct ab8500_shared_mode ldo_anamic1_shared;
+static struct ab8500_shared_mode ldo_anamic2_shared;
+
 static int ab8500_regulator_enable(struct regulator_dev *rdev)
 {
        int ret;
@@ -271,8 +298,12 @@ static unsigned int ab8500_regulator_get_optimum_mode(
 static int ab8500_regulator_set_mode(struct regulator_dev *rdev,
                                     unsigned int mode)
 {
-       int ret;
-       u8 update_val;
+       int ret = 0;
+       u8 bank;
+       u8 reg;
+       u8 mask;
+       u8 val;
+       bool dmr = false; /* Dedicated mode register */
        struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 
        if (info == NULL) {
@@ -280,59 +311,128 @@ static int ab8500_regulator_set_mode(struct regulator_dev *rdev,
                return -EINVAL;
        }
 
-       switch (mode) {
-       case REGULATOR_MODE_NORMAL:
-               update_val = info->update_val_normal;
-               break;
-       case REGULATOR_MODE_IDLE:
-               update_val = info->update_val_idle;
-               break;
-       default:
-               return -EINVAL;
+       if (info->shared_mode) {
+               /*
+                * Special case where mode is shared between two regulators.
+                */
+               struct ab8500_shared_mode *sm = info->shared_mode;
+               mutex_lock(&shared_mode_mutex);
+
+               if (mode == REGULATOR_MODE_IDLE) {
+                       sm->lp_mode_req = true; /* Low power mode requested */
+                       if (!((sm->shared_regulator)->
+                             shared_mode->lp_mode_req)) {
+                               mutex_unlock(&shared_mode_mutex);
+                               return 0; /* Other regulator prevent LP mode */
+                       }
+               } else {
+                       sm->lp_mode_req = false;
+               }
        }
 
-       /* ab8500 regulators share mode and enable in the same register bits.
-          off = 0b00
-          low power mode= 0b11
-          full powermode = 0b01
-          (HW control mode = 0b10)
-          Thus we don't write to the register when regulator is disabled.
-       */
-       if (info->is_enabled) {
+       if (info->mode_mask) {
+               /* Dedicated register for handling mode */
+
+               dmr = true;
+
+               switch (mode) {
+               case REGULATOR_MODE_NORMAL:
+                       val = info->mode_val_normal;
+                       break;
+               case REGULATOR_MODE_IDLE:
+                       val = info->mode_val_idle;
+                       break;
+               default:
+                       if (info->shared_mode)
+                               mutex_unlock(&shared_mode_mutex);
+                       return -EINVAL;
+               }
+
+               bank = info->mode_bank;
+               reg = info->mode_reg;
+               mask = info->mode_mask;
+       } else {
+               /* Mode register same as enable register */
+
+               switch (mode) {
+               case REGULATOR_MODE_NORMAL:
+                       info->update_val = info->update_val_normal;
+                       val = info->update_val_normal;
+                       break;
+               case REGULATOR_MODE_IDLE:
+                       info->update_val = info->update_val_idle;
+                       val = info->update_val_idle;
+                       break;
+               default:
+                       if (info->shared_mode)
+                               mutex_unlock(&shared_mode_mutex);
+                       return -EINVAL;
+               }
+
+               bank = info->update_bank;
+               reg = info->update_reg;
+               mask = info->update_mask;
+       }
+
+       if (info->is_enabled || dmr) {
                ret = abx500_mask_and_set_register_interruptible(info->dev,
-                       info->update_bank, info->update_reg,
-                       info->update_mask, update_val);
-               if (ret < 0) {
+                       bank, reg, mask, val);
+               if (ret < 0)
                        dev_err(rdev_get_dev(rdev),
                                "couldn't set regulator mode\n");
-                       return ret;
-               }
 
                dev_vdbg(rdev_get_dev(rdev),
                        "%s-set_mode (bank, reg, mask, value): "
                        "0x%x, 0x%x, 0x%x, 0x%x\n",
-                       info->desc.name, info->update_bank, info->update_reg,
-                       info->update_mask, update_val);
+                       info->desc.name, bank, reg,
+                       mask, val);
        }
 
-       info->update_val = update_val;
+       if (info->shared_mode)
+               mutex_unlock(&shared_mode_mutex);
 
-       return 0;
+       return ret;
 }
 
 static unsigned int ab8500_regulator_get_mode(struct regulator_dev *rdev)
 {
        struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
        int ret;
+       u8 val;
+       u8 val_normal;
+       u8 val_idle;
 
        if (info == NULL) {
                dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
                return -EINVAL;
        }
 
-       if (info->update_val == info->update_val_normal)
+       /* Need special handling for shared mode */
+       if (info->shared_mode) {
+               if (info->shared_mode->lp_mode_req)
+                       return REGULATOR_MODE_IDLE;
+               else
+                       return REGULATOR_MODE_NORMAL;
+       }
+
+       if (info->mode_mask) {
+               /* Dedicated register for handling mode */
+               ret = abx500_get_register_interruptible(info->dev,
+               info->mode_bank, info->mode_reg, &val);
+               val = val & info->mode_mask;
+
+               val_normal = info->mode_val_normal;
+               val_idle = info->mode_val_idle;
+       } else {
+               /* Mode register same as enable register */
+               val = info->update_val;
+               val_normal = info->update_val_normal;
+               val_idle = info->update_val_idle;
+       }
+
+       if (val == val_normal)
                ret = REGULATOR_MODE_NORMAL;
-       else if (info->update_val == info->update_val_idle)
+       else if (val == val_idle)
                ret = REGULATOR_MODE_IDLE;
        else
                ret = -EINVAL;
@@ -585,6 +685,15 @@ static struct regulator_ops ab8500_regulator_ops = {
        .list_voltage           = regulator_list_voltage_linear,
 };
 
+static struct regulator_ops ab8500_regulator_anamic_mode_ops = {
+       .enable         = ab8500_regulator_enable,
+       .disable        = ab8500_regulator_disable,
+       .is_enabled     = ab8500_regulator_is_enabled,
+       .set_mode       = ab8500_regulator_set_mode,
+       .get_mode       = ab8500_regulator_get_mode,
+       .list_voltage   = regulator_list_voltage_table,
+};
+
 /* AB8500 regulator information */
 static struct ab8500_regulator_info
                ab8500_regulator_info[AB8500_NUM_REGULATORS] = {
@@ -1024,32 +1133,44 @@ static struct ab8500_regulator_info
        [AB8505_LDO_ANAMIC1] = {
                .desc = {
                        .name           = "LDO-ANAMIC1",
-                       .ops            = &ab8500_regulator_ops,
+                       .ops            = &ab8500_regulator_anamic_mode_ops,
                        .type           = REGULATOR_VOLTAGE,
                        .id             = AB8505_LDO_ANAMIC1,
                        .owner          = THIS_MODULE,
                        .n_voltages     = 1,
                        .volt_table     = fixed_2050000_voltage,
                },
+               .shared_mode = &ldo_anamic1_shared,
                .update_bank            = 0x03,
                .update_reg             = 0x83,
                .update_mask            = 0x08,
                .update_val             = 0x08,
+               .mode_bank              = 0x01,
+               .mode_reg               = 0x54,
+               .mode_mask              = 0x04,
+               .mode_val_idle          = 0x04,
+               .mode_val_normal        = 0x00,
        },
        [AB8505_LDO_ANAMIC2] = {
                .desc = {
                        .name           = "LDO-ANAMIC2",
-                       .ops            = &ab8500_regulator_ops,
+                       .ops            = &ab8500_regulator_anamic_mode_ops,
                        .type           = REGULATOR_VOLTAGE,
                        .id             = AB8505_LDO_ANAMIC2,
                        .owner          = THIS_MODULE,
                        .n_voltages     = 1,
                        .volt_table     = fixed_2050000_voltage,
                },
+               .shared_mode            = &ldo_anamic2_shared,
                .update_bank            = 0x03,
                .update_reg             = 0x83,
                .update_mask            = 0x10,
                .update_val             = 0x10,
+               .mode_bank              = 0x01,
+               .mode_reg               = 0x54,
+               .mode_mask              = 0x04,
+               .mode_val_idle          = 0x04,
+               .mode_val_normal        = 0x00,
        },
        [AB8505_LDO_AUX8] = {
                .desc = {
@@ -1589,6 +1710,14 @@ static struct ab8500_regulator_info
        },
 };
 
+static struct ab8500_shared_mode ldo_anamic1_shared = {
+       .shared_regulator = &ab8505_regulator_info[AB8505_LDO_ANAMIC2],
+};
+
+static struct ab8500_shared_mode ldo_anamic2_shared = {
+       .shared_regulator = &ab8505_regulator_info[AB8505_LDO_ANAMIC1],
+};
+
 struct ab8500_reg_init {
        u8 bank;
        u8 addr;