#ifndef __IEEE80211_H
#define __IEEE80211_H
-#include "osdep_service.h"
-#include "drv_types.h"
-#include "wifi.h"
-#include <linux/compiler.h>
-#include <linux/wireless.h>
+#include <linux/ieee80211.h>
-#define MGMT_QUEUE_NUM 5
-#define ETH_ALEN 6
#define IEEE_CMD_SET_WPA_PARAM 1
#define IEEE_CMD_SET_WPA_IE 2
#define IEEE_CMD_SET_ENCRYPTION 3
} u;
};
-#define IEEE80211_DATA_LEN 2304
-/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
- * 6.2.1.1.2.
- *
- * The figure in section 7.1.2 suggests a body size of up to 2312
- * bytes is allowed, which is a bit confusing, I suspect this
- * represents the 2304 bytes of real data, plus a possible 8 bytes of
- * WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro)
- */
-
-#define IEEE80211_HLEN 30
-#define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
-
-/* this is stolen from ipw2200 driver */
-#define IEEE_IBSS_MAC_HASH_SIZE 31
-
-struct ieee_ibss_seq {
- u8 mac[ETH_ALEN];
- u16 seq_num;
- u16 frag_num;
- unsigned long packet_time;
- struct list_head list;
-};
-
-struct ieee80211_hdr {
- __le16 frame_ctl;
- __le16 duration_id;
- u8 addr1[ETH_ALEN];
- u8 addr2[ETH_ALEN];
- u8 addr3[ETH_ALEN];
- __le16 seq_ctl;
- u8 addr4[ETH_ALEN];
-} __packed __aligned(2);
-
-struct ieee80211_hdr_3addr {
- __le16 frame_ctl;
- __le16 duration_id;
- u8 addr1[ETH_ALEN];
- u8 addr2[ETH_ALEN];
- u8 addr3[ETH_ALEN];
- __le16 seq_ctl;
-} __packed __aligned(2);
-
-struct ieee80211_hdr_qos {
- __le16 frame_ctl;
- __le16 duration_id;
- u8 addr1[ETH_ALEN];
- u8 addr2[ETH_ALEN];
- u8 addr3[ETH_ALEN];
- __le16 seq_ctl;
- u8 addr4[ETH_ALEN];
- __le16 qc;
-} __packed __aligned(2);
-
-struct ieee80211_hdr_3addr_qos {
- __le16 frame_ctl;
- __le16 duration_id;
- u8 addr1[ETH_ALEN];
- u8 addr2[ETH_ALEN];
- u8 addr3[ETH_ALEN];
- __le16 seq_ctl;
- __le16 qc;
-} __packed;
-
-struct eapol {
- u8 snap[6];
- __be16 ethertype;
- u8 version;
- u8 type;
- __le16 length;
-} __packed;
-
-enum eap_type {
- EAP_PACKET = 0,
- EAPOL_START,
- EAPOL_LOGOFF,
- EAPOL_KEY,
- EAPOL_ENCAP_ASF_ALERT
-};
-
-#define IEEE80211_3ADDR_LEN 24
-#define IEEE80211_4ADDR_LEN 30
-#define IEEE80211_FCS_LEN 4
-
#define MIN_FRAG_THRESHOLD 256U
#define MAX_FRAG_THRESHOLD 2346U
-/* Frame control field constants */
-#define IEEE80211_FCTL_VERS 0x0002
-#define IEEE80211_FCTL_FTYPE 0x000c
-#define IEEE80211_FCTL_STYPE 0x00f0
-#define IEEE80211_FCTL_TODS 0x0100
-#define IEEE80211_FCTL_FROMDS 0x0200
-#define IEEE80211_FCTL_MOREFRAGS 0x0400
-#define IEEE80211_FCTL_RETRY 0x0800
-#define IEEE80211_FCTL_PM 0x1000
-#define IEEE80211_FCTL_MOREDATA 0x2000
-#define IEEE80211_FCTL_WEP 0x4000
-#define IEEE80211_FCTL_ORDER 0x8000
-
-#define IEEE80211_FTYPE_MGMT 0x0000
-#define IEEE80211_FTYPE_CTL 0x0004
-#define IEEE80211_FTYPE_DATA 0x0008
-
-/* management */
-#define IEEE80211_STYPE_ASSOC_REQ 0x0000
-#define IEEE80211_STYPE_ASSOC_RESP 0x0010
-#define IEEE80211_STYPE_REASSOC_REQ 0x0020
-#define IEEE80211_STYPE_REASSOC_RESP 0x0030
-#define IEEE80211_STYPE_PROBE_REQ 0x0040
-#define IEEE80211_STYPE_PROBE_RESP 0x0050
-#define IEEE80211_STYPE_BEACON 0x0080
-#define IEEE80211_STYPE_ATIM 0x0090
-#define IEEE80211_STYPE_DISASSOC 0x00A0
-#define IEEE80211_STYPE_AUTH 0x00B0
-#define IEEE80211_STYPE_DEAUTH 0x00C0
-
-/* control */
-#define IEEE80211_STYPE_PSPOLL 0x00A0
-#define IEEE80211_STYPE_RTS 0x00B0
-#define IEEE80211_STYPE_CTS 0x00C0
-#define IEEE80211_STYPE_ACK 0x00D0
-#define IEEE80211_STYPE_CFEND 0x00E0
-#define IEEE80211_STYPE_CFENDACK 0x00F0
-
-/* data */
-#define IEEE80211_STYPE_DATA 0x0000
-#define IEEE80211_STYPE_DATA_CFACK 0x0010
-#define IEEE80211_STYPE_DATA_CFPOLL 0x0020
-#define IEEE80211_STYPE_DATA_CFACKPOLL 0x0030
-#define IEEE80211_STYPE_NULLFUNC 0x0040
-#define IEEE80211_STYPE_CFACK 0x0050
-#define IEEE80211_STYPE_CFPOLL 0x0060
-#define IEEE80211_STYPE_CFACKPOLL 0x0070
-#define IEEE80211_QOS_DATAGRP 0x0080
-
-#define IEEE80211_SCTL_FRAG 0x000F
-#define IEEE80211_SCTL_SEQ 0xFFF0
-
/* QoS,QOS */
#define NORMAL_ACK 0
-#define NO_ACK 1
-#define NON_EXPLICIT_ACK 2
-#define BLOCK_ACK 3
-
-#ifndef ETH_P_PAE
-#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
-#endif /* ETH_P_PAE */
-
-#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
-
-#define ETH_P_ECONET 0x0018
-
-#ifndef ETH_P_80211_RAW
-#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
-#endif
/* IEEE 802.11 defines */
#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
-#define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
-#define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
-
-#define WLAN_QC_GET_TID(qc) ((qc) & 0x0f)
-
-#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
-#define WLAN_GET_SEQ_SEQ(seq) ((seq) & IEEE80211_SCTL_SEQ)
-
-/* Authentication algorithms */
-#define WLAN_AUTH_OPEN 0
-#define WLAN_AUTH_SHARED_KEY 1
-
-#define WLAN_AUTH_CHALLENGE_LEN 128
-
-#define WLAN_CAPABILITY_BSS BIT(0)
-#define WLAN_CAPABILITY_IBSS BIT(1)
-#define WLAN_CAPABILITY_CF_POLLABLE BIT(2)
-#define WLAN_CAPABILITY_CF_POLL_REQUEST BIT(3)
-#define WLAN_CAPABILITY_PRIVACY BIT(4)
-#define WLAN_CAPABILITY_SHORT_PREAMBLE BIT(5)
-#define WLAN_CAPABILITY_PBCC BIT(6)
-#define WLAN_CAPABILITY_CHANNEL_AGILITY BIT(7)
-#define WLAN_CAPABILITY_SHORT_SLOT BIT(10)
-
-/* Information Element IDs */
-#define WLAN_EID_SSID 0
-#define WLAN_EID_SUPP_RATES 1
-#define WLAN_EID_FH_PARAMS 2
-#define WLAN_EID_DS_PARAMS 3
-#define WLAN_EID_CF_PARAMS 4
-#define WLAN_EID_TIM 5
-#define WLAN_EID_IBSS_PARAMS 6
-#define WLAN_EID_CHALLENGE 16
-#define WLAN_EID_RSN 48
-#define WLAN_EID_GENERIC 221
-
-#define IEEE80211_MGMT_HDR_LEN 24
-#define IEEE80211_DATA_HDR3_LEN 24
-#define IEEE80211_DATA_HDR4_LEN 30
-
-#define IEEE80211_STATMASK_SIGNAL BIT(0)
-#define IEEE80211_STATMASK_RSSI BIT(1)
-#define IEEE80211_STATMASK_NOISE BIT(2)
-#define IEEE80211_STATMASK_RATE BIT(3)
-#define IEEE80211_STATMASK_WEMASK 0x7
-
-#define IEEE80211_CCK_MODULATION BIT(0)
-#define IEEE80211_OFDM_MODULATION BIT(1)
-
-#define IEEE80211_24GHZ_BAND BIT(0)
-#define IEEE80211_52GHZ_BAND BIT(1)
-
#define IEEE80211_CCK_RATE_LEN 4
#define IEEE80211_NUM_OFDM_RATESLEN 8
#define IEEE80211_CCK_RATE_2MB 0x04
#define IEEE80211_CCK_RATE_5MB 0x0B
#define IEEE80211_CCK_RATE_11MB 0x16
-#define IEEE80211_OFDM_RATE_LEN 8
#define IEEE80211_OFDM_RATE_6MB 0x0C
#define IEEE80211_OFDM_RATE_9MB 0x12
#define IEEE80211_OFDM_RATE_12MB 0x18
#define IEEE80211_OFDM_RATE_54MB 0x6C
#define IEEE80211_BASIC_RATE_MASK 0x80
-#define IEEE80211_CCK_RATE_1MB_MASK BIT(0)
-#define IEEE80211_CCK_RATE_2MB_MASK BIT(1)
-#define IEEE80211_CCK_RATE_5MB_MASK BIT(2)
-#define IEEE80211_CCK_RATE_11MB_MASK BIT(3)
-#define IEEE80211_OFDM_RATE_6MB_MASK BIT(4)
-#define IEEE80211_OFDM_RATE_9MB_MASK BIT(5)
-#define IEEE80211_OFDM_RATE_12MB_MASK BIT(6)
-#define IEEE80211_OFDM_RATE_18MB_MASK BIT(7)
-#define IEEE80211_OFDM_RATE_24MB_MASK BIT(8)
-#define IEEE80211_OFDM_RATE_36MB_MASK BIT(9)
-#define IEEE80211_OFDM_RATE_48MB_MASK BIT(10)
-#define IEEE80211_OFDM_RATE_54MB_MASK BIT(11)
-
-#define IEEE80211_CCK_RATES_MASK 0x0000000F
-#define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \
- IEEE80211_CCK_RATE_2MB_MASK)
-#define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \
- IEEE80211_CCK_RATE_5MB_MASK | \
- IEEE80211_CCK_RATE_11MB_MASK)
-
-#define IEEE80211_OFDM_RATES_MASK 0x00000FF0
-#define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \
- IEEE80211_OFDM_RATE_12MB_MASK | \
- IEEE80211_OFDM_RATE_24MB_MASK)
-#define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \
- IEEE80211_OFDM_RATE_9MB_MASK | \
- IEEE80211_OFDM_RATE_18MB_MASK | \
- IEEE80211_OFDM_RATE_36MB_MASK | \
- IEEE80211_OFDM_RATE_48MB_MASK | \
- IEEE80211_OFDM_RATE_54MB_MASK)
-#define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
- IEEE80211_CCK_DEFAULT_RATES_MASK)
-
-#define IEEE80211_NUM_OFDM_RATES 8
-#define IEEE80211_NUM_CCK_RATES 4
-#define IEEE80211_OFDM_SHIFT_MASK_A 4
-
-/* NOTE: This data is for statistical purposes; not all hardware provides this
- * information for frames received. Not setting these will not cause
- * any adverse affects.
- */
-struct ieee80211_rx_stats {
- s8 rssi;
- u8 signal;
- u8 noise;
- u8 received_channel;
- u16 rate; /* in 100 kbps */
- u8 mask;
- u8 freq;
- u16 len;
-};
-
-/* IEEE 802.11 requires that STA supports concurrent reception of at least
- * three fragmented frames. This define can be increased to support more
- * concurrent frames, but it should be noted that each entry can consume about
- * 2 kB of RAM and increasing cache size will slow down frame reassembly.
- */
-#define IEEE80211_FRAG_CACHE_LEN 4
-
-struct ieee80211_frag_entry {
- u32 first_frag_time;
- uint seq;
- uint last_frag;
- uint qos; /*jackson*/
- uint tid; /*jackson*/
- struct sk_buff *skb;
- u8 src_addr[ETH_ALEN];
- u8 dst_addr[ETH_ALEN];
-};
-
-struct ieee80211_stats {
- uint tx_unicast_frames;
- uint tx_multicast_frames;
- uint tx_fragments;
- uint tx_unicast_octets;
- uint tx_multicast_octets;
- uint tx_deferred_transmissions;
- uint tx_single_retry_frames;
- uint tx_multiple_retry_frames;
- uint tx_retry_limit_exceeded;
- uint tx_discards;
- uint rx_unicast_frames;
- uint rx_multicast_frames;
- uint rx_fragments;
- uint rx_unicast_octets;
- uint rx_multicast_octets;
- uint rx_fcs_errors;
- uint rx_discards_no_buffer;
- uint tx_discards_wrong_sa;
- uint rx_discards_undecryptable;
- uint rx_message_in_msg_fragments;
- uint rx_message_in_bad_msg_fragments;
-};
-
-struct ieee80211_softmac_stats {
- uint rx_ass_ok;
- uint rx_ass_err;
- uint rx_probe_rq;
- uint tx_probe_rs;
- uint tx_beacons;
- uint rx_auth_rq;
- uint rx_auth_rs_ok;
- uint rx_auth_rs_err;
- uint tx_auth_rq;
- uint no_auth_rs;
- uint no_ass_rs;
- uint tx_ass_rq;
- uint rx_ass_rq;
- uint tx_probe_rq;
- uint reassoc;
- uint swtxstop;
- uint swtxawake;
-};
-
-#define SEC_KEY_1 BIT(0)
-#define SEC_KEY_2 BIT(1)
-#define SEC_KEY_3 BIT(2)
-#define SEC_KEY_4 BIT(3)
-#define SEC_ACTIVE_KEY BIT(4)
-#define SEC_AUTH_MODE BIT(5)
-#define SEC_UNICAST_GROUP BIT(6)
-#define SEC_LEVEL BIT(7)
-#define SEC_ENABLED BIT(8)
-
-#define SEC_LEVEL_0 0 /* None */
-#define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */
-#define SEC_LEVEL_2 2 /* Level 1 + TKIP */
-#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
-#define SEC_LEVEL_3 4 /* Level 2 + CCMP */
-
#define WEP_KEYS 4
-#define WEP_KEY_LEN 13
-
-struct ieee80211_security {
- u16 active_key:2,
- enabled:1,
- auth_mode:2,
- auth_algo:4,
- unicast_uses_group:1;
- u8 key_sizes[WEP_KEYS];
- u8 keys[WEP_KEYS][WEP_KEY_LEN];
- u8 level;
- u16 flags;
-} __packed;
-
-/*
- *
- * 802.11 data frame from AP
- *
- * ,-------------------------------------------------------------------.
- * Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
- * |------|------|---------|---------|---------|------|---------|------|
- * Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs |
- * | | tion | (BSSID) | | | ence | data | |
- * `-------------------------------------------------------------------'
- *
- * Total: 28-2340 bytes
- *
- */
-
-struct ieee80211_header_data {
- __le16 frame_ctl;
- __le16 duration_id;
- u8 addr1[6];
- u8 addr2[6];
- u8 addr3[6];
- __le16 seq_ctrl;
-} __packed __aligned(2);
-#define BEACON_PROBE_SSID_ID_POSITION 12
-
-/* Management Frame Information Element Types */
-#define MFIE_TYPE_SSID 0
-#define MFIE_TYPE_RATES 1
-#define MFIE_TYPE_FH_SET 2
-#define MFIE_TYPE_DS_SET 3
-#define MFIE_TYPE_CF_SET 4
-#define MFIE_TYPE_TIM 5
-#define MFIE_TYPE_IBSS_SET 6
-#define MFIE_TYPE_CHALLENGE 16
-#define MFIE_TYPE_ERP 42
-#define MFIE_TYPE_RSN 48
-#define MFIE_TYPE_RATES_EX 50
-#define MFIE_TYPE_GENERIC 221
-
-struct ieee80211_info_element_hdr {
- u8 id;
- u8 len;
-} __packed;
-
-struct ieee80211_info_element {
- u8 id;
- u8 len;
- u8 data[];
-} __packed;
-
-/*
- * These are the data types that can make up management packets
- *
- __le16 auth_algorithm;
- __le16 auth_sequence;
- __le16 beacon_interval;
- __le16 capability;
- u8 current_ap[ETH_ALEN];
- __le16 listen_interval;
- struct {
- u16 association_id:14, reserved:2;
- } __packed;
- __le32 time_stamp[2];
- __le16 reason;
- __le16 status;
-*/
-
-#define IEEE80211_DEFAULT_TX_ESSID "Penguin"
-#define IEEE80211_DEFAULT_BASIC_RATE 10
-
-struct ieee80211_authentication {
- struct ieee80211_header_data header;
- __le16 algorithm;
- __le16 transaction;
- __le16 status;
-} __packed;
-
-struct ieee80211_probe_response {
- struct ieee80211_header_data header;
- __le32 time_stamp[2];
- __le16 beacon_interval;
- __le16 capability;
- struct ieee80211_info_element info_element;
-} __packed;
-
-struct ieee80211_probe_request {
- struct ieee80211_header_data header;
-} __packed;
-
-struct ieee80211_assoc_request_frame {
- struct ieee80211_hdr_3addr header;
- __le16 capability;
- __le16 listen_interval;
- struct ieee80211_info_element_hdr info_element;
-} __packed;
-
-struct ieee80211_assoc_response_frame {
- struct ieee80211_hdr_3addr header;
- __le16 capability;
- __le16 status;
- __le16 aid;
-} __packed;
-
-struct ieee80211_txb {
- u8 nr_frags;
- u8 encrypted;
- u16 reserved;
- u16 frag_size;
- u16 payload_size;
- struct sk_buff *fragments[];
-};
-
-/* SWEEP TABLE ENTRIES NUMBER*/
-#define MAX_SWEEP_TAB_ENTRIES 42
-#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7
/* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs
* only use 8, and then use extended rates for the remaining supported
* rates. Other APs, however, stick all of their supported rates on the
* main rates information element...
*/
#define MAX_RATES_LENGTH ((u8)12)
-#define MAX_RATES_EX_LENGTH ((u8)16)
-#define MAX_NETWORK_COUNT 128
-#define MAX_CHANNEL_NUMBER 161
-#define IEEE80211_SOFTMAC_SCAN_TIME 400
-/*(HZ / 2)*/
-#define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
-
-#define CRC_LENGTH 4U
-
#define MAX_WPA_IE_LEN 128
-#define NETWORK_EMPTY_ESSID BIT(0)
-#define NETWORK_HAS_OFDM BIT(1)
-#define NETWORK_HAS_CCK BIT(2)
-
-#define IEEE80211_DTIM_MBCAST 4
-#define IEEE80211_DTIM_UCAST 2
-#define IEEE80211_DTIM_VALID 1
-#define IEEE80211_DTIM_INVALID 0
-
-#define IEEE80211_PS_DISABLED 0
-#define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
-#define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
-#define IW_ESSID_MAX_SIZE 32
-/*
- * join_res:
- * -1: authentication fail
- * -2: association fail
- * > 0: TID
- */
-
-enum ieee80211_state {
- /* the card is not linked at all */
- IEEE80211_NOLINK = 0,
- /* IEEE80211_ASSOCIATING* are for BSS client mode
- * the driver shall not perform RX filtering unless
- * the state is LINKED.
- * The driver shall just check for the state LINKED and
- * defaults to NOLINK for ALL the other states (including
- * LINKED_SCANNING)
- */
- /* the association procedure will start (wq scheduling)*/
- IEEE80211_ASSOCIATING,
- IEEE80211_ASSOCIATING_RETRY,
- /* the association procedure is sending AUTH request*/
- IEEE80211_ASSOCIATING_AUTHENTICATING,
- /* the association procedure has successfully authenticated
- * and is sending association request
- */
- IEEE80211_ASSOCIATING_AUTHENTICATED,
- /* the link is ok. the card associated to a BSS or linked
- * to a ibss cell or acting as an AP and creating the bss
- */
- IEEE80211_LINKED,
- /* same as LINKED, but the driver shall apply RX filter
- * rules as we are in NO_LINK mode. As the card is still
- * logically linked, but it is doing a syncro site survey
- * then it will be back to LINKED state.
- */
- IEEE80211_LINKED_SCANNING,
-};
-
-#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
-#define DEFAULT_FTS 2346
-
-#define CFG_IEEE80211_RESERVE_FCS BIT(0)
-#define CFG_IEEE80211_COMPUTE_FCS BIT(1)
-
-#define MAXTID 16
-
-#define IEEE_A BIT(0)
-#define IEEE_B BIT(1)
-#define IEEE_G BIT(2)
-#define IEEE_MODE_MASK (IEEE_A | IEEE_B | IEEE_G)
-
-static inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
-{
- /* Single white space is for Linksys APs */
- if (essid_len == 1 && essid[0] == ' ')
- return 1;
- /* Otherwise, if the entire essid is 0, we assume it is hidden */
- while (essid_len) {
- essid_len--;
- if (essid[essid_len] != '\0')
- return 0;
- }
- return 1;
-}
-
-static inline int ieee80211_get_hdrlen(u16 fc)
-{
- int hdrlen = 24;
-
- switch (WLAN_FC_GET_TYPE(fc)) {
- case IEEE80211_FTYPE_DATA:
- if (fc & IEEE80211_QOS_DATAGRP)
- hdrlen += 2;
- if ((fc & IEEE80211_FCTL_FROMDS) && (fc & IEEE80211_FCTL_TODS))
- hdrlen += 6; /* Addr4 */
- break;
- case IEEE80211_FTYPE_CTL:
- switch (WLAN_FC_GET_STYPE(fc)) {
- case IEEE80211_STYPE_CTS:
- case IEEE80211_STYPE_ACK:
- hdrlen = 10;
- break;
- default:
- hdrlen = 16;
- break;
- }
- break;
- }
- return hdrlen;
-}
-
struct registry_priv;
u8 *r8712_set_ie(u8 *pbuf, sint index, uint len, u8 *source, uint *frlen);
projects / linux-block.git / commitdiff