pinctrl: amd: Add support for additional GPIO
authorShah, Nehal-bakulchandra <Nehal-Bakulchandra.shah@amd.com>
Tue, 6 Dec 2016 06:47:48 +0000 (12:17 +0530)
committerLinus Walleij <linus.walleij@linaro.org>
Wed, 28 Dec 2016 12:26:09 +0000 (13:26 +0100)
This patch adds support for new Bank and adds IRQCHIP_SKIP_SET_WAKE flag.

Reviewed-by: S-k, Shyam-sundar <Shyam-sundar.S-k@amd.com>
Signed-off-by: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
drivers/pinctrl/pinctrl-amd.c
drivers/pinctrl/pinctrl-amd.h

index aea310a918210ebc96bcb2739ac3c50d10329f8d..47b17100410ee4701748aa85848fdaa99ebc9131 100644 (file)
@@ -186,7 +186,7 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
        char *output_value;
        char *output_enable;
 
-       for (bank = 0; bank < AMD_GPIO_TOTAL_BANKS; bank++) {
+       for (bank = 0; bank < gpio_dev->hwbank_num; bank++) {
                seq_printf(s, "GPIO bank%d\t", bank);
 
                switch (bank) {
@@ -202,8 +202,11 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
                        i = 128;
                        pin_num = AMD_GPIO_PINS_BANK2 + i;
                        break;
+               case 3:
+                       i = 192;
+                       pin_num = AMD_GPIO_PINS_BANK3 + i;
+                       break;
                }
-
                for (; i < pin_num; i++) {
                        seq_printf(s, "pin%d\t", i);
                        spin_lock_irqsave(&gpio_dev->lock, flags);
@@ -213,7 +216,7 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
                        if (pin_reg & BIT(INTERRUPT_ENABLE_OFF)) {
                                interrupt_enable = "interrupt is enabled|";
 
-                               if (!(pin_reg & BIT(ACTIVE_LEVEL_OFF))
+               if (!(pin_reg & BIT(ACTIVE_LEVEL_OFF))
                                && !(pin_reg & BIT(ACTIVE_LEVEL_OFF+1)))
                                        active_level = "Active low|";
                                else if (pin_reg & BIT(ACTIVE_LEVEL_OFF)
@@ -244,17 +247,17 @@ static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
                                interrupt_mask =
                                        "interrupt is masked|";
 
-                       if (pin_reg & BIT(WAKE_CNTRL_OFF))
+                       if (pin_reg & BIT(WAKE_CNTRL_OFF_S0I3))
                                wake_cntrl0 = "enable wakeup in S0i3 state|";
                        else
                                wake_cntrl0 = "disable wakeup in S0i3 state|";
 
-                       if (pin_reg & BIT(WAKE_CNTRL_OFF))
+                       if (pin_reg & BIT(WAKE_CNTRL_OFF_S3))
                                wake_cntrl1 = "enable wakeup in S3 state|";
                        else
                                wake_cntrl1 = "disable wakeup in S3 state|";
 
-                       if (pin_reg & BIT(WAKE_CNTRL_OFF))
+                       if (pin_reg & BIT(WAKE_CNTRL_OFF_S4))
                                wake_cntrl2 = "enable wakeup in S4/S5 state|";
                        else
                                wake_cntrl2 = "disable wakeup in S4/S5 state|";
@@ -479,6 +482,7 @@ static struct irq_chip amd_gpio_irqchip = {
        .irq_unmask   = amd_gpio_irq_unmask,
        .irq_eoi      = amd_gpio_irq_eoi,
        .irq_set_type = amd_gpio_irq_set_type,
+       .flags        = IRQCHIP_SKIP_SET_WAKE,
 };
 
 static void amd_gpio_irq_handler(struct irq_desc *desc)
@@ -764,15 +768,16 @@ static int amd_gpio_probe(struct platform_device *pdev)
        gpio_dev->gc.set_debounce       = amd_gpio_set_debounce;
        gpio_dev->gc.dbg_show           = amd_gpio_dbg_show;
 
-       gpio_dev->gc.base                       = 0;
+       gpio_dev->gc.base               = -1;
        gpio_dev->gc.label                      = pdev->name;
        gpio_dev->gc.owner                      = THIS_MODULE;
        gpio_dev->gc.parent                     = &pdev->dev;
-       gpio_dev->gc.ngpio                      = TOTAL_NUMBER_OF_PINS;
+       gpio_dev->gc.ngpio                      = resource_size(res) / 4;
 #if defined(CONFIG_OF_GPIO)
        gpio_dev->gc.of_node                    = pdev->dev.of_node;
 #endif
 
+       gpio_dev->hwbank_num = gpio_dev->gc.ngpio / 64;
        gpio_dev->groups = kerncz_groups;
        gpio_dev->ngroups = ARRAY_SIZE(kerncz_groups);
 
@@ -789,7 +794,7 @@ static int amd_gpio_probe(struct platform_device *pdev)
                return ret;
 
        ret = gpiochip_add_pin_range(&gpio_dev->gc, dev_name(&pdev->dev),
-                               0, 0, TOTAL_NUMBER_OF_PINS);
+                               0, 0, gpio_dev->gc.ngpio);
        if (ret) {
                dev_err(&pdev->dev, "Failed to add pin range\n");
                goto out2;
@@ -810,7 +815,6 @@ static int amd_gpio_probe(struct platform_device *pdev)
                                 &amd_gpio_irqchip,
                                 irq_base,
                                 amd_gpio_irq_handler);
-
        platform_set_drvdata(pdev, gpio_dev);
 
        dev_dbg(&pdev->dev, "amd gpio driver loaded\n");
@@ -829,6 +833,7 @@ static int amd_gpio_remove(struct platform_device *pdev)
        gpio_dev = platform_get_drvdata(pdev);
 
        gpiochip_remove(&gpio_dev->gc);
+       pinctrl_unregister(gpio_dev->pctrl);
 
        return 0;
 }
index 7bfea47dbb472f6857380023873f4caf6aad25a8..c03f77822069ec01daabb36306feae98660af494 100644 (file)
 #ifndef _PINCTRL_AMD_H
 #define _PINCTRL_AMD_H
 
-#define TOTAL_NUMBER_OF_PINS   192
 #define AMD_GPIO_PINS_PER_BANK  64
-#define AMD_GPIO_TOTAL_BANKS    3
 
 #define AMD_GPIO_PINS_BANK0     63
 #define AMD_GPIO_PINS_BANK1     64
 #define AMD_GPIO_PINS_BANK2     56
+#define AMD_GPIO_PINS_BANK3     32
 
 #define WAKE_INT_MASTER_REG 0xfc
 #define EOI_MASK (1 << 29)
@@ -35,7 +34,9 @@
 #define ACTIVE_LEVEL_OFF               9
 #define INTERRUPT_ENABLE_OFF           11
 #define INTERRUPT_MASK_OFF             12
-#define WAKE_CNTRL_OFF                 13
+#define WAKE_CNTRL_OFF_S0I3             13
+#define WAKE_CNTRL_OFF_S3               14
+#define WAKE_CNTRL_OFF_S4               15
 #define PIN_STS_OFF                    16
 #define DRV_STRENGTH_SEL_OFF           17
 #define PULL_UP_SEL_OFF                        19
@@ -93,6 +94,7 @@ struct amd_gpio {
        u32 ngroups;
        struct pinctrl_dev *pctrl;
        struct gpio_chip        gc;
+       unsigned int            hwbank_num;
        struct resource         *res;
        struct platform_device  *pdev;
 };