Blackfin: drop unused SL811 platform resources from bf527/pnav boards
authorMike Frysinger <vapier@gentoo.org>
Mon, 21 Dec 2009 15:04:03 +0000 (15:04 +0000)
committerMike Frysinger <vapier@gentoo.org>
Tue, 9 Mar 2010 05:30:47 +0000 (00:30 -0500)
These platforms don't hook up to this USB controller, so no point in
declaring resources for it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
arch/blackfin/mach-bf527/boards/cm_bf527.c
arch/blackfin/mach-bf527/boards/ezkit.c
arch/blackfin/mach-bf537/boards/pnav10.c

index eaa0131f9605d35e34f92e6f324c662487c3bdc1..d6efdfa7d4e051cf7a06b25cc46a81486917ea51 100644 (file)
@@ -18,7 +18,6 @@
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <linux/usb/sl811.h>
 #include <linux/usb/musb.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
@@ -270,50 +269,6 @@ static struct platform_device dm9000_device = {
 };
 #endif
 
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-static struct resource sl811_hcd_resources[] = {
-       {
-               .start = 0x20340000,
-               .end = 0x20340000,
-               .flags = IORESOURCE_MEM,
-       }, {
-               .start = 0x20340004,
-               .end = 0x20340004,
-               .flags = IORESOURCE_MEM,
-       }, {
-               .start = CONFIG_USB_SL811_BFIN_IRQ,
-               .end = CONFIG_USB_SL811_BFIN_IRQ,
-               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-       },
-};
-
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-void sl811_port_power(struct device *dev, int is_on)
-{
-       gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
-       gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
-}
-#endif
-
-static struct sl811_platform_data sl811_priv = {
-       .potpg = 10,
-       .power = 250,       /* == 500mA */
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-       .port_power = &sl811_port_power,
-#endif
-};
-
-static struct platform_device sl811_hcd_device = {
-       .name = "sl811-hcd",
-       .id = 0,
-       .dev = {
-               .platform_data = &sl811_priv,
-       },
-       .num_resources = ARRAY_SIZE(sl811_hcd_resources),
-       .resource = sl811_hcd_resources,
-};
-#endif
-
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
        .name = "bfin_mii_bus",
@@ -929,10 +884,6 @@ static struct platform_device *cmbf527_devices[] __initdata = {
        &rtc_device,
 #endif
 
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-       &sl811_hcd_device,
-#endif
-
 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
        &bfin_isp1760_device,
 #endif
index 0cc3581e64616353e35fab79e6d1f3974ad14db7..a7beed517c2eca018f33b9b444c2f59bada1340a 100644 (file)
@@ -16,7 +16,6 @@
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <linux/usb/sl811.h>
 #include <linux/usb/musb.h>
 #include <linux/leds.h>
 #include <linux/input.h>
@@ -359,50 +358,6 @@ static struct platform_device dm9000_device = {
 };
 #endif
 
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-static struct resource sl811_hcd_resources[] = {
-       {
-               .start = 0x20340000,
-               .end = 0x20340000,
-               .flags = IORESOURCE_MEM,
-       }, {
-               .start = 0x20340004,
-               .end = 0x20340004,
-               .flags = IORESOURCE_MEM,
-       }, {
-               .start = CONFIG_USB_SL811_BFIN_IRQ,
-               .end = CONFIG_USB_SL811_BFIN_IRQ,
-               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-       },
-};
-
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-void sl811_port_power(struct device *dev, int is_on)
-{
-       gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
-       gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
-}
-#endif
-
-static struct sl811_platform_data sl811_priv = {
-       .potpg = 10,
-       .power = 250,       /* == 500mA */
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-       .port_power = &sl811_port_power,
-#endif
-};
-
-static struct platform_device sl811_hcd_device = {
-       .name = "sl811-hcd",
-       .id = 0,
-       .dev = {
-               .platform_data = &sl811_priv,
-       },
-       .num_resources = ARRAY_SIZE(sl811_hcd_resources),
-       .resource = sl811_hcd_resources,
-};
-#endif
-
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
        .name = "bfin_mii_bus",
@@ -1113,10 +1068,6 @@ static struct platform_device *stamp_devices[] __initdata = {
        &rtc_device,
 #endif
 
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-       &sl811_hcd_device,
-#endif
-
 #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
        &bfin_isp1760_device,
 #endif
index f08533d4aee8daa1c9de9a126818e510806e4ae6..a0f64ff0fb55bbf92de2e7a64a7449cee6d9945b 100644 (file)
@@ -17,7 +17,6 @@
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
-#include <linux/usb/sl811.h>
 
 #include <linux/spi/ad7877.h>
 
@@ -99,51 +98,6 @@ static struct platform_device smc91x_device = {
 };
 #endif
 
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-static struct resource sl811_hcd_resources[] = {
-       {
-               .start = 0x20340000,
-               .end = 0x20340000,
-               .flags = IORESOURCE_MEM,
-       }, {
-               .start = 0x20340004,
-               .end = 0x20340004,
-               .flags = IORESOURCE_MEM,
-       }, {
-               .start = CONFIG_USB_SL811_BFIN_IRQ,
-               .end = CONFIG_USB_SL811_BFIN_IRQ,
-               .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-       },
-};
-
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-void sl811_port_power(struct device *dev, int is_on)
-{
-       gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
-       gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
-
-}
-#endif
-
-static struct sl811_platform_data sl811_priv = {
-       .potpg = 10,
-       .power = 250,       /* == 500mA */
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-       .port_power = &sl811_port_power,
-#endif
-};
-
-static struct platform_device sl811_hcd_device = {
-       .name = "sl811-hcd",
-       .id = 0,
-       .dev = {
-               .platform_data = &sl811_priv,
-       },
-       .num_resources = ARRAY_SIZE(sl811_hcd_resources),
-       .resource = sl811_hcd_resources,
-};
-#endif
-
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 static struct platform_device bfin_mii_bus = {
        .name = "bfin_mii_bus",
@@ -514,10 +468,6 @@ static struct platform_device *stamp_devices[] __initdata = {
        &rtc_device,
 #endif
 
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-       &sl811_hcd_device,
-#endif
-
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
        &smc91x_device,
 #endif