docs: update for new data placement options

Update the HOWTO and man page for the unified data placement options
that cover both FDP and Streams.

Signed-off-by: Vincent Fu <vincent.fu@samsung.com>

diff --git a/HOWTO.rst b/HOWTO.rst
index 2f108e3627b6b09504c0977f193d8bc8001eef83..2f8ef6d42cbfa05972c5e87373aa5dd18b60af86 100644 (file)
--- a/HOWTO.rst
+++ b/HOWTO.rst
@@ -2500,7 +2500,24 @@ with the caveat that when used on the command line, they must come after the
 
        Enable Flexible Data Placement mode for write commands.
 
-.. option:: fdp_pli_select=str : [io_uring_cmd] [xnvme]
+.. option:: dataplacement=str : [io_uring_cmd] [xnvme]
+
+        Specifies the data placement directive type to use for write commands.
+        The following types are supported:
+
+                **none**
+                        Do not use a data placement directive. This is the
+                        default.
+
+                **fdp**
+                        Use Flexible Data Placement directives for write
+                        commands. This is equivalent to specifying
+                        :option:`fdp` =1.
+
+               **streams**
+                        Use Streams directives for write commands.
+
+.. option:: plid_select=str, fdp_pli_select=str : [io_uring_cmd] [xnvme]
 
        Defines how fio decides which placement ID to use next. The following
        types are defined:
@@ -2512,16 +2529,17 @@ with the caveat that when used on the command line, they must come after the
                        Round robin over available placement IDs. This is the
                        default.
 
-       The available placement ID index/indices is defined by the option
-       :option:`fdp_pli`.
+       The available placement ID (indices) are defined by the option
+       :option:`plids`.
 
-.. option:: fdp_pli=str : [io_uring_cmd] [xnvme]
+.. option:: plids=str, fdp_pli=str : [io_uring_cmd] [xnvme]
 
-       Select which Placement ID Index/Indicies this job is allowed to use for
-       writes. By default, the job will cycle through all available Placement
-        IDs, so use this to isolate these identifiers to specific jobs. If you
-        want fio to use placement identifier only at indices 0, 2 and 5 specify
-        ``fdp_pli=0,2,5``.
+        Select which Placement IDs (streams) or Placement ID Indices (FDP) this
+        job is allowed to use for writes. For FDP by default, the job will
+        cycle through all available Placement IDs, so use this to isolate these
+        identifiers to specific jobs. If you want fio to use FDP placement
+        identifiers only at indices 0, 2 and 5 specify ``plids=0,2,5``. For
+        streams this should be a comma-separated list of Stream IDs.
 
 .. option:: md_per_io_size=int : [io_uring_cmd] [xnvme]
 

diff --git a/fio.1 b/fio.1
index 5fd3603dc220b5a1e520ae01f122fb5d39ae8d12..ee8124946a81a087375fb17293e7a8db5cfc81c4 100644 (file)
--- a/fio.1
+++ b/fio.1
@@ -2264,7 +2264,26 @@ file blocks are fully allocated and the disk request could be issued immediately
 .BI (io_uring_cmd,xnvme)fdp \fR=\fPbool
 Enable Flexible Data Placement mode for write commands.
 .TP
-.BI (io_uring_cmd,xnvme)fdp_pli_select \fR=\fPstr
+.BI (io_uring_cmd,xnvme)dataplacement \fR=\fPstr
+Specifies the data placement directive type to use for write commands. The
+following types are supported:
+.RS
+.RS
+.TP
+.B none
+Do not use a data placement directive. This is the default.
+.TP
+.B fdp
+Use Flexible Data placement directives for write commands. This is equivalent
+to specifying \fBfdp\fR=1.
+.TP
+.B streams
+Use Streams directives for write commands.
+.TP
+.RE
+.RE
+.TP
+.BI (io_uring_cmd,xnvme)plid_select=str, fdp_pli_select \fR=\fPstr
 Defines how fio decides which placement ID to use next. The following types
 are defined:
 .RS
@@ -2277,14 +2296,16 @@ Choose a placement ID at random (uniform).
 Round robin over available placement IDs. This is the default.
 .RE
 .P
-The available placement ID index/indices is defined by \fBfdp_pli\fR option.
+The available placement ID (indices) are defined by the \fBplids\fR option.
 .RE
 .TP
-.BI (io_uring_cmd,xnvme)fdp_pli \fR=\fPstr
-Select which Placement ID Index/Indicies this job is allowed to use for writes.
-By default, the job will cycle through all available Placement IDs, so use this
-to isolate these identifiers to specific jobs. If you want fio to use placement
-identifier only at indices 0, 2 and 5 specify, you would set `fdp_pli=0,2,5`.
+.BI (io_uring_cmd,xnvme)plids=str, fdp_pli \fR=\fPstr
+Select which Placement IDs (streams) or Placement ID Indicies (FDP) this job is
+allowed to use for writes.  For FDP by default, the job will cycle through all
+available Placement IDs, so use this to isolate these identifiers to specific
+jobs. If you want fio to use placement identifier only at indices 0, 2 and 5
+specify, you would set `plids=0,2,5`. For streams this should be a
+comma-separated list of Stream IDs.
 .TP
 .BI (io_uring_cmd,xnvme)md_per_io_size \fR=\fPint
 Size in bytes for separate metadata buffer per IO. Default: 0.