};
memory@80000000 {
+ bootph-all;
device_type = "memory";
/* 2G RAM */
reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
evm_12v0: regulator-0 {
/* main DC jack */
+ bootph-all;
compatible = "regulator-fixed";
regulator-name = "evm_12v0";
regulator-min-microvolt = <12000000>;
vsys_3v3: regulator-2 {
/* output of LM5140 */
+ bootph-all;
compatible = "regulator-fixed";
regulator-name = "vsys_3v3";
regulator-min-microvolt = <3300000>;
vdd_mmc1: regulator-3 {
/* TPS2051BD */
+ bootph-all;
compatible = "regulator-fixed";
regulator-name = "vdd_mmc1";
regulator-min-microvolt = <3300000>;
};
vtt_supply: regulator-5 {
+ bootph-all;
compatible = "regulator-fixed";
regulator-name = "vtt";
pinctrl-names = "default";
};
main_uart0_pins_default: main-uart0-default-pins {
+ bootph-all;
pinctrl-single,pins = <
AM64X_IOPAD(0x0238, PIN_INPUT, 0) /* (B16) UART0_CTSn */
AM64X_IOPAD(0x023c, PIN_OUTPUT, 0) /* (A16) UART0_RTSn */
};
main_i2c0_pins_default: main-i2c0-default-pins {
+ bootph-all;
pinctrl-single,pins = <
AM64X_IOPAD(0x0260, PIN_INPUT_PULLUP, 0) /* (A18) I2C0_SCL */
AM64X_IOPAD(0x0264, PIN_INPUT_PULLUP, 0) /* (B18) I2C0_SDA */
};
main_i2c1_pins_default: main-i2c1-default-pins {
+ bootph-all;
pinctrl-single,pins = <
AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
};
mdio1_pins_default: mdio1-default-pins {
+ bootph-all;
pinctrl-single,pins = <
AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
};
rgmii1_pins_default: rgmii1-default-pins {
+ bootph-all;
pinctrl-single,pins = <
AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */
AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */
};
rgmii2_pins_default: rgmii2-default-pins {
+ bootph-all;
pinctrl-single,pins = <
AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */
AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */
};
main_usb0_pins_default: main-usb0-default-pins {
+ bootph-all;
pinctrl-single,pins = <
AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */
>;
};
ddr_vtt_pins_default: ddr-vtt-default-pins {
+ bootph-all;
pinctrl-single,pins = <
AM64X_IOPAD(0x0030, PIN_OUTPUT_PULLUP, 7) /* (L18) OSPI0_CSN1.GPIO0_12 */
>;
};
&main_uart0 {
+ bootph-all;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
};
&main_i2c0 {
+ bootph-all;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
};
&main_i2c1 {
+ bootph-all;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;
exp1: gpio@22 {
+ bootph-all;
compatible = "ti,tca6424";
reg = <0x22>;
gpio-controller;
};
};
+&main_gpio0 {
+ bootph-all;
+};
+
/* mcu_gpio0 is reserved for mcu firmware usage */
&mcu_gpio0 {
status = "reserved";
&sdhci1 {
/* SD/MMC */
+ bootph-all;
vmmc-supply = <&vdd_mmc1>;
pinctrl-names = "default";
bus-width = <4>;
};
&usbss0 {
+ bootph-all;
ti,vbus-divider;
ti,usb2-only;
};
&usb0 {
+ bootph-all;
dr_mode = "otg";
maximum-speed = "high-speed";
pinctrl-names = "default";
};
&cpsw3g {
+ bootph-all;
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins_default>, <&rgmii2_pins_default>;
};
&cpsw_port1 {
+ bootph-all;
phy-mode = "rgmii-rxid";
phy-handle = <&cpsw3g_phy0>;
};
};
&cpsw3g_mdio {
+ bootph-all;
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mdio1_pins_default>;
cpsw3g_phy0: ethernet-phy@0 {
+ bootph-all;
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;