--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
++#include <dt-bindings/leds/common.h>
+
+#include "bcm4908.dtsi"
+
+/ {
+ compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca";
+ model = "Asus GT-AC5300";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00 0x00 0x00 0x40000000>;
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ key-wifi {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+ };
+
+ key-wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ };
+
+ key-restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+ };
+
+ key-brightness {
+ label = "LEDs";
+ linux,code = <KEY_BRIGHTNESS_ZERO>;
+ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&enet {
+ nvmem-cells = <&base_mac_addr>;
+ nvmem-cell-names = "mac-address";
+};
+
+&usb_phy {
+ brcm,ioc = <1>;
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+};
+
+&ports {
+ port@0 {
+ label = "lan2";
+ };
+
+ port@1 {
+ label = "lan1";
+ };
+
+ port@2 {
+ label = "lan6";
+ };
+
+ port@3 {
+ label = "lan5";
+ };
+
+ /* External BCM53134S switch */
+ port@7 {
+ label = "sw";
+ reg = <7>;
+ phy-mode = "rgmii";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+};
+
+&mdio {
+ /* lan8 */
+ ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ /* lan7 */
+ ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ /* lan4 */
+ ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ /* lan3 */
+ ethernet-phy@3 {
+ reg = <3>;
+ };
+};
+
++&leds {
++ led-power@11 {
++ reg = <0x11>;
++ function = LED_FUNCTION_POWER;
++ color = <LED_COLOR_ID_WHITE>;
++ default-state = "on";
++ active-low;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pins_led_17_a>;
++ };
++
++ led-wan-red@12 {
++ reg = <0x12>;
++ function = LED_FUNCTION_WAN;
++ color = <LED_COLOR_ID_RED>;
++ active-low;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pins_led_18_a>;
++ };
++
++ led-wps@14 {
++ reg = <0x14>;
++ function = LED_FUNCTION_WPS;
++ color = <LED_COLOR_ID_WHITE>;
++ active-low;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pins_led_20_a>;
++ };
++
++ led-wan-white@15 {
++ reg = <0x15>;
++ function = LED_FUNCTION_WAN;
++ color = <LED_COLOR_ID_WHITE>;
++ active-low;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pins_led_21_a>;
++ };
++
++ led-lan@19 {
++ reg = <0x19>;
++ function = LED_FUNCTION_LAN;
++ color = <LED_COLOR_ID_WHITE>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pins_led_25_a>;
++ };
++};
++
+&nandcs {
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-on-flash-bbt;
+ brcm,nand-has-wp;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ partitions {
+ compatible = "brcm,bcm4908-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ compatible = "nvmem-cells";
+ label = "cferom";
+ reg = <0x0 0x100000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x100000>;
+
+ base_mac_addr: mac@106a0 {
+ reg = <0x106a0 0x6>;
+ };
+ };
+
+ partition@100000 {
+ compatible = "brcm,bcm4908-firmware";
+ reg = <0x100000 0x5700000>;
+ };
+
+ partition@5800000 {
+ compatible = "brcm,bcm4908-firmware";
+ reg = <0x5800000 0x5700000>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/soc/bcm-pmb.h>
+
+/dts-v1/;
+
+/ {
+ interrupt-parent = <&gic>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "brcm,brahma-b53";
+ reg = <0x0>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0xfff8>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "brcm,brahma-b53";
+ reg = <0x1>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0xfff8>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "brcm,brahma-b53";
+ reg = <0x2>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0xfff8>;
+ next-level-cache = <&l2>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "brcm,brahma-b53";
+ reg = <0x3>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0xfff8>;
+ next-level-cache = <&l2>;
+ };
+
+ l2: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ axi@81000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00 0x00 0x81000000 0x4000>;
+
+ gic: interrupt-controller@1000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x1000 0x1000>,
+ <0x2000 0x2000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ clocks {
+ periph_clk: periph_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ clock-output-names = "periph";
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00 0x00 0x80000000 0x281000>;
+
+ enet: ethernet@2000 {
+ compatible = "brcm,bcm4908-enet";
+ reg = <0x2000 0x1000>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "rx", "tx";
+ };
+
+ usb_phy: usb-phy@c200 {
+ compatible = "brcm,bcm4908-usb-phy";
+ reg = <0xc200 0x100>;
+ reg-names = "ctrl";
+ power-domains = <&pmb BCM_PMB_HOST_USB>;
+ dr_mode = "host";
+ brcm,has-xhci;
+ brcm,has-eohci;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ ehci: usb@c300 {
+ compatible = "generic-ehci";
+ reg = <0xc300 0x100>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb_phy PHY_TYPE_USB2>;
+ status = "disabled";
+ };
+
+ ohci: usb@c400 {
+ compatible = "generic-ohci";
+ reg = <0xc400 0x100>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb_phy PHY_TYPE_USB2>;
+ status = "disabled";
+ };
+
+ xhci: usb@d000 {
+ compatible = "generic-xhci";
+ reg = <0xd000 0x8c8>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb_phy PHY_TYPE_USB3>;
+ status = "disabled";
+ };
+
+ bus@80000 {
+ compatible = "simple-bus";
+ #size-cells = <1>;
+ #address-cells = <1>;
+ ranges = <0 0x80000 0x50000>;
+
+ ethernet-switch@0 {
+ compatible = "brcm,bcm4908-switch";
+ reg = <0x0 0x40000>,
+ <0x40000 0x110>,
+ <0x40340 0x30>,
+ <0x40380 0x30>,
+ <0x40600 0x34>,
+ <0x40800 0x208>;
+ reg-names = "core", "reg", "intrl2_0",
+ "intrl2_1", "fcb", "acb";
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ brcm,num-gphy = <5>;
+ brcm,num-rgmii-ports = <2>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ phy-mode = "internal";
+ phy-handle = <&phy8>;
+ };
+
+ port@1 {
+ reg = <1>;
+ phy-mode = "internal";
+ phy-handle = <&phy9>;
+ };
+
+ port@2 {
+ reg = <2>;
+ phy-mode = "internal";
+ phy-handle = <&phy10>;
+ };
+
+ port@3 {
+ reg = <3>;
+ phy-mode = "internal";
+ phy-handle = <&phy11>;
+ };
+
+ port@8 {
+ reg = <8>;
+ phy-mode = "internal";
+ ethernet = <&enet>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+
+ mdio: mdio@405c0 {
+ compatible = "brcm,unimac-mdio";
+ reg = <0x405c0 0x8>;
+ reg-names = "mdio";
+ #size-cells = <0>;
+ #address-cells = <1>;
+
+ phy8: ethernet-phy@8 {
+ reg = <8>;
+ };
+
+ phy9: ethernet-phy@9 {
+ reg = <9>;
+ };
+
+ phy10: ethernet-phy@a {
+ reg = <10>;
+ };
+
+ phy11: ethernet-phy@b {
+ reg = <11>;
+ };
+
+ phy12: ethernet-phy@c {
+ reg = <12>;
+ };
+ };
+ };
+
+ procmon: syscon@280000 {
+ compatible = "simple-bus";
+ reg = <0x280000 0x1000>;
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pmb: power-controller@2800c0 {
+ compatible = "brcm,bcm4908-pmb";
+ reg = <0x2800c0 0x40>;
+ #power-domain-cells = <1>;
+ };
+ };
+ };
+
+ bus@ff800000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00 0x00 0xff800000 0x3000>;
+
+ twd: timer-mfd@400 {
+ compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
+ reg = <0x400 0x4c>;
+ ranges = <0x0 0x400 0x4c>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ watchdog@28 {
+ compatible = "brcm,bcm6345-wdt";
+ reg = <0x28 0x8>;
+ };
+ };
+
+ gpio0: gpio-controller@500 {
+ compatible = "brcm,bcm6345-gpio";
+ reg-names = "dirout", "dat";
+ reg = <0x500 0x28>, <0x528 0x28>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ pinctrl@560 {
+ compatible = "brcm,bcm4908-pinctrl";
+ reg = <0x560 0x10>;
+
+ pins_led_0_a: led_0-a-pins {
+ function = "led_0";
+ groups = "led_0_grp_a";
+ };
+
+ pins_led_1_a: led_1-a-pins {
+ function = "led_1";
+ groups = "led_1_grp_a";
+ };
+
+ pins_led_2_a: led_2-a-pins {
+ function = "led_2";
+ groups = "led_2_grp_a";
+ };
+
+ pins_led_3_a: led_3-a-pins {
+ function = "led_3";
+ groups = "led_3_grp_a";
+ };
+
+ pins_led_4_a: led_4-a-pins {
+ function = "led_4";
+ groups = "led_4_grp_a";
+ };
+
+ pins_led_5_a: led_5-a-pins {
+ function = "led_5";
+ groups = "led_5_grp_a";
+ };
+
+ pins_led_6_a: led_6-a-pins {
+ function = "led_6";
+ groups = "led_6_grp_a";
+ };
+
+ pins_led_7_a: led_7-a-pins {
+ function = "led_7";
+ groups = "led_7_grp_a";
+ };
+
+ pins_led_8_a: led_8-a-pins {
+ function = "led_8";
+ groups = "led_8_grp_a";
+ };
+
+ pins_led_9_a: led_9-a-pins {
+ function = "led_9";
+ groups = "led_9_grp_a";
+ };
+
++ pins_led_10_a: led_10-a-pins {
++ function = "led_10";
++ groups = "led_10_grp_a";
++ };
++
++ pins_led_11_a: led_11-a-pins {
++ function = "led_11";
++ groups = "led_11_grp_a";
++ };
++
++ pins_led_12_a: led_12-a-pins {
++ function = "led_12";
++ groups = "led_12_grp_a";
++ };
++
++ pins_led_13_a: led_13-a-pins {
++ function = "led_13";
++ groups = "led_13_grp_a";
++ };
++
++ pins_led_14_a: led_14-a-pins {
++ function = "led_14";
++ groups = "led_14_grp_a";
++ };
++
++ pins_led_15_a: led_15-a-pins {
++ function = "led_15";
++ groups = "led_15_grp_a";
++ };
++
++ pins_led_16_a: led_16-a-pins {
++ function = "led_16";
++ groups = "led_16_grp_a";
++ };
++
++ pins_led_17_a: led_17-a-pins {
++ function = "led_17";
++ groups = "led_17_grp_a";
++ };
++
++ pins_led_18_a: led_18-a-pins {
++ function = "led_18";
++ groups = "led_18_grp_a";
++ };
++
++ pins_led_19_a: led_19-a-pins {
++ function = "led_19";
++ groups = "led_19_grp_a";
++ };
++
++ pins_led_20_a: led_20-a-pins {
++ function = "led_20";
++ groups = "led_20_grp_a";
++ };
++
+ pins_led_21_a: led_21-a-pins {
+ function = "led_21";
+ groups = "led_21_grp_a";
+ };
+
+ pins_led_22_a: led_22-a-pins {
+ function = "led_22";
+ groups = "led_22_grp_a";
+ };
+
++ pins_led_23_a: led_23-a-pins {
++ function = "led_23";
++ groups = "led_23_grp_a";
++ };
++
++ pins_led_24_a: led_24-a-pins {
++ function = "led_24";
++ groups = "led_24_grp_a";
++ };
++
++ pins_led_25_a: led_25-a-pins {
++ function = "led_25";
++ groups = "led_25_grp_a";
++ };
++
+ pins_led_26_a: led_26-a-pins {
+ function = "led_26";
+ groups = "led_26_grp_a";
+ };
+
+ pins_led_27_a: led_27-a-pins {
+ function = "led_27";
+ groups = "led_27_grp_a";
+ };
+
+ pins_led_28_a: led_28-a-pins {
+ function = "led_28";
+ groups = "led_28_grp_a";
+ };
+
+ pins_led_29_a: led_29-a-pins {
+ function = "led_29";
+ groups = "led_29_grp_a";
+ };
+
+ pins_led_30_a: led_30-a-pins {
+ function = "led_30";
+ groups = "led_30_grp_a";
+ };
+
++ pins_led_31_a: led_31-a-pins {
++ function = "led_31";
++ groups = "led_31_grp_a";
++ };
++
+ pins_hs_uart: hs_uart-pins {
+ function = "hs_uart";
+ groups = "hs_uart_grp";
+ };
+
+ pins_i2c_a: i2c-a-pins {
+ function = "i2c";
+ groups = "i2c_grp_a";
+ };
+
+ pins_i2c_b: i2c-b-pins {
+ function = "i2c";
+ groups = "i2c_grp_b";
+ };
+
+ pins_i2s: i2s-pins {
+ function = "i2s";
+ groups = "i2s_grp";
+ };
+
+ pins_nand_ctrl: nand_ctrl-pins {
+ function = "nand_ctrl";
+ groups = "nand_ctrl_grp";
+ };
+
+ pins_nand_data: nand_data-pins {
+ function = "nand_data";
+ groups = "nand_data_grp";
+ };
+
+ pins_emmc_ctrl: emmc_ctrl-pins {
+ function = "emmc_ctrl";
+ groups = "emmc_ctrl_grp";
+ };
+
+ pins_usb0_pwr: usb0_pwr-pins {
+ function = "usb0_pwr";
+ groups = "usb0_pwr_grp";
+ };
+
+ pins_usb1_pwr: usb1_pwr-pins {
+ function = "usb1_pwr";
+ groups = "usb1_pwr_grp";
+ };
+ };
+
+ uart0: serial@640 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x640 0x18>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+ status = "okay";
+ };
+
++ leds: leds@800 {
++ compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
++ reg = <0x800 0xdc>;
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
+ nand-controller@1800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+ reg = <0x1800 0x600>, <0x2000 0x10>;
+ reg-names = "nand", "nand-int-base";
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "nand";
+ status = "okay";
+
+ nandcs: nand@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ };
+ };
+
+ i2c@2100 {
+ compatible = "brcm,brcmper-i2c";
+ reg = <0x2100 0x58>;
+ clock-frequency = <97500>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c_a>;
+ status = "disabled";
+ };
+
+ misc@2600 {
+ compatible = "brcm,misc", "simple-mfd";
+ reg = <0x2600 0xe4>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00 0x2600 0xe4>;
+
+ reset-controller@2644 {
+ compatible = "brcm,bcm4908-misc-pcie-reset";
+ reg = <0x44 0x04>;
+ #reset-cells = <1>;
+ };
+ };
+ };
+
+ reboot {
+ compatible = "syscon-reboot";
+ regmap = <&twd>;
+ offset = <0x34>;
+ mask = <1>;
+ };
+};
projects / linux-block.git / commitdiff