Documentation: devicetree: Document BCM23550 bindings

Add binding document for Broadcom BCM23550 SoC.

BCM23550 has a Cluster Dormant Control IP block that holds cores
in an idle state. Introduce a new CPU enable method in which the CDC is
accessed to bring the core online.

Signed-off-by: Chris Brand <chris.brand@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt
new file mode 100644 (file)
index 0000000..a3af54c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550-cpu-method.txt
@@ -0,0 +1,36 @@
+Broadcom Kona Family CPU Enable Method
+--------------------------------------
+This binding defines the enable method used for starting secondary
+CPUs in the following Broadcom SoCs:
+  BCM23550
+
+The enable method is specified by defining the following required
+properties in the "cpu" device tree node:
+  - enable-method = "brcm,bcm23550";
+  - secondary-boot-reg = <...>;
+
+The secondary-boot-reg property is a u32 value that specifies the
+physical address of the register used to request the ROM holding pen
+code release a secondary CPU.  The value written to the register is
+formed by encoding the target CPU id into the low bits of the
+physical start address it should jump to.
+
+Example:
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu0: cpu@0 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a9";
+                       reg = <0>;
+               };
+
+               cpu1: cpu@1 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a9";
+                       reg = <1>;
+                       enable-method = "brcm,bcm23550";
+                       secondary-boot-reg = <0x3500417c>;
+               };
+       };

diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt
new file mode 100644 (file)
index 0000000..080baad
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.txt
@@ -0,0 +1,15 @@
+Broadcom BCM23550 device tree bindings
+--------------------------------------
+
+This document describes the device tree bindings for boards with the BCM23550
+SoC.
+
+Required root node property:
+  - compatible: brcm,bcm23550
+
+Example:
+       / {
+               model = "BCM23550 SoC";
+               compatible = "brcm,bcm23550";
+               [...]
+       }

diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index e97a45681138fe2eab109c8e608fc0f23b2243a5..ff76088f3b84266e99788a097cc1b2d25f51c006 100644 (file)
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -194,6 +194,7 @@ nodes to be present and contain the properties described below.
                            "allwinner,sun8i-a23"
                            "arm,realview-smp"
                            "brcm,bcm11351-cpu-method"
+                           "brcm,bcm23550"
                            "brcm,bcm-nsp-smp"
                            "brcm,brahma-b15"
                            "marvell,armada-375-smp"