spi: pxa2xx: Add support for both chip selects on Intel Braswell
authorMika Westerberg <mika.westerberg@linux.intel.com>
Mon, 8 Feb 2016 15:14:31 +0000 (17:14 +0200)
committerMark Brown <broonie@kernel.org>
Tue, 9 Feb 2016 19:01:11 +0000 (19:01 +0000)
Intel Braswell LPSS SPI controller actually has two chip selects and there
is no capabilities register where this could be found out. These two chip
selects are controlled by bits which are in slightly differrent location
than Broxton has.

Braswell Windows driver also starts chip select (ACPI DeviceSelection)
numbering from 1 so translate it to be suitable for Linux as well.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
drivers/spi/spi-pxa2xx.c
include/linux/pxa2xx_ssp.h

index 81d68e01046aee8e5c4046d96d00b38597d217bc..0eb79368eabc1073496fb7ca0372ae94ad65e433 100644 (file)
@@ -83,6 +83,7 @@ struct lpss_config {
        /* Chip select control */
        unsigned cs_sel_shift;
        unsigned cs_sel_mask;
+       unsigned cs_num;
 };
 
 /* Keep these sorted with enum pxa_ssp_type */
@@ -107,6 +108,19 @@ static const struct lpss_config lpss_platforms[] = {
                .tx_threshold_lo = 160,
                .tx_threshold_hi = 224,
        },
+       {       /* LPSS_BSW_SSP */
+               .offset = 0x400,
+               .reg_general = 0x08,
+               .reg_ssp = 0x0c,
+               .reg_cs_ctrl = 0x18,
+               .reg_capabilities = -1,
+               .rx_threshold = 64,
+               .tx_threshold_lo = 160,
+               .tx_threshold_hi = 224,
+               .cs_sel_shift = 2,
+               .cs_sel_mask = 1 << 2,
+               .cs_num = 2,
+       },
        {       /* LPSS_SPT_SSP */
                .offset = 0x200,
                .reg_general = -1,
@@ -142,6 +156,7 @@ static bool is_lpss_ssp(const struct driver_data *drv_data)
        switch (drv_data->ssp_type) {
        case LPSS_LPT_SSP:
        case LPSS_BYT_SSP:
+       case LPSS_BSW_SSP:
        case LPSS_SPT_SSP:
        case LPSS_BXT_SSP:
                return true;
@@ -1189,6 +1204,7 @@ static int setup(struct spi_device *spi)
                break;
        case LPSS_LPT_SSP:
        case LPSS_BYT_SSP:
+       case LPSS_BSW_SSP:
        case LPSS_SPT_SSP:
        case LPSS_BXT_SSP:
                config = lpss_get_config(drv_data);
@@ -1336,7 +1352,7 @@ static const struct acpi_device_id pxa2xx_spi_acpi_match[] = {
        { "INT3430", LPSS_LPT_SSP },
        { "INT3431", LPSS_LPT_SSP },
        { "80860F0E", LPSS_BYT_SSP },
-       { "8086228E", LPSS_BYT_SSP },
+       { "8086228E", LPSS_BSW_SSP },
        { },
 };
 MODULE_DEVICE_TABLE(acpi, pxa2xx_spi_acpi_match);
@@ -1473,6 +1489,7 @@ static int pxa2xx_spi_fw_translate_cs(struct spi_master *master, unsigned cs)
                 * to match what Linux expects.
                 */
                case LPSS_BYT_SSP:
+               case LPSS_BSW_SSP:
                        return cs - 1;
 
                default:
@@ -1622,6 +1639,8 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
                        tmp &= LPSS_CAPS_CS_EN_MASK;
                        tmp >>= LPSS_CAPS_CS_EN_SHIFT;
                        platform_info->num_chipselect = ffz(tmp);
+               } else if (config->cs_num) {
+                       platform_info->num_chipselect = config->cs_num;
                }
        }
        master->num_chipselect = platform_info->num_chipselect;
index c2f2574ff61ceebbe4729df6d577722b391d0600..2a097d176ba964faae345a245f516c447701553c 100644 (file)
@@ -197,6 +197,7 @@ enum pxa_ssp_type {
        QUARK_X1000_SSP,
        LPSS_LPT_SSP, /* Keep LPSS types sorted with lpss_platforms[] */
        LPSS_BYT_SSP,
+       LPSS_BSW_SSP,
        LPSS_SPT_SSP,
        LPSS_BXT_SSP,
 };