[ALSA] Change an arugment of snd_mpu401_uart_new() to bit flags
authorTakashi Iwai <tiwai@suse.de>
Tue, 23 May 2006 11:24:30 +0000 (13:24 +0200)
committerJaroslav Kysela <perex@suse.cz>
Thu, 22 Jun 2006 19:33:56 +0000 (21:33 +0200)
Change the 5th argument of snd_mpu401_uart_new() to bit flags
instead of a boolean.  The argument takes bits that consist of
MPU401_INFO_XXX flags.
The callers that used the value 1 there are replaced with
MPU401_INFO_INTEGRATED.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
19 files changed:
Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
include/sound/mpu401.h
sound/drivers/mpu401/mpu401_uart.c
sound/isa/sscape.c
sound/pci/als4000.c
sound/pci/au88x0/au88x0_mpu401.c
sound/pci/azt3328.c
sound/pci/cmipci.c
sound/pci/cs5535audio/cs5535audio.c
sound/pci/es1938.c
sound/pci/es1968.c
sound/pci/fm801.c
sound/pci/ice1712/ice1712.c
sound/pci/ice1712/ice1724.c
sound/pci/maestro3.c
sound/pci/sonicvibes.c
sound/pci/trident/trident.c
sound/pci/via82xx.c
sound/pci/ymfpci/ymfpci.c

index 23c6c7cde4e6f7c52def7b9c468698905797e17a..635cbb94357cd575bc46ae3328179dc4cac5ced1 100644 (file)
@@ -4215,7 +4215,7 @@ struct _snd_pcm_runtime {
           <programlisting>
 <![CDATA[
   struct snd_rawmidi *rmidi;
-  snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, port, integrated,
+  snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, port, info_flags,
                       irq, irq_flags, &rmidi);
 ]]>
           </programlisting>
@@ -4242,15 +4242,36 @@ struct _snd_pcm_runtime {
       </para>
 
       <para>
+       The 5th argument is bitflags for additional information.
         When the i/o port address above is a part of the PCI i/o
       region, the MPU401 i/o port might have been already allocated
-      (reserved) by the driver itself. In such a case, pass non-zero
-      to the 5th argument
-      (<parameter>integrated</parameter>). Otherwise, pass 0 to it,
+      (reserved) by the driver itself. In such a case, pass a bit flag
+      <constant>MPU401_INFO_INTEGRATED</constant>,
       and 
       the mpu401-uart layer will allocate the i/o ports by itself. 
       </para>
 
+       <para>
+       When the controller supports only the input or output MIDI stream,
+       pass <constant>MPU401_INFO_INPUT</constant> or
+       <constant>MPU401_INFO_OUTPUT</constant> bitflag, respectively.
+       Then the rawmidi instance is created as a single stream.
+       </para>
+
+       <para>
+       <constant>MPU401_INFO_MMIO</constant> bitflag is used to change
+       the access method to MMIO (via readb and writeb) instead of
+       iob and outb.  In this case, you have to pass the iomapped address
+       to <function>snd_mpu401_uart_new()</function>.
+       </para>
+
+       <para>
+       When <constant>MPU401_INFO_TX_IRQ</constant> is set, the output
+       stream isn't checked in the default interrupt handler.  The driver
+       needs to call <function>snd_mpu401_uart_interrupt_tx()</function>
+       by itself to start processing the output stream in irq handler.
+       </para>
+
       <para>
         Usually, the port address corresponds to the command port and
         port + 1 corresponds to the data port. If not, you may change
index 8e97ace78f1679b2d62501470cd2cf8439a2c8b2..ac504321ea5625775698a3735f9b5bbf252c418f 100644 (file)
 #define MPU401_HW_PC98II               18      /* Roland PC98II */
 #define MPU401_HW_AUREAL               19      /* Aureal Vortex */
 
+#define MPU401_INFO_INPUT      (1 << 0)        /* input stream */
+#define MPU401_INFO_OUTPUT     (1 << 1)        /* output stream */
+#define MPU401_INFO_INTEGRATED (1 << 2)        /* integrated h/w port */
+#define MPU401_INFO_MMIO       (1 << 3)        /* MMIO access */
+#define MPU401_INFO_TX_IRQ     (1 << 4)        /* independent TX irq */
+
 #define MPU401_MODE_BIT_INPUT          0
 #define MPU401_MODE_BIT_OUTPUT         1
 #define MPU401_MODE_BIT_INPUT_TRIGGER  2
@@ -62,6 +68,7 @@ struct snd_mpu401 {
        struct snd_rawmidi *rmidi;
 
        unsigned short hardware;        /* MPU401_HW_XXXX */
+       unsigned int info_flags;        /* MPU401_INFO_XXX */
        unsigned long port;             /* base port of MPU-401 chip */
        unsigned long cport;            /* port + 1 (usually) */
        struct resource *res;           /* port resource */
@@ -99,13 +106,16 @@ struct snd_mpu401 {
 
  */
 
-irqreturn_t snd_mpu401_uart_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+irqreturn_t snd_mpu401_uart_interrupt(int irq, void *dev_id,
+                                     struct pt_regs *regs);
+irqreturn_t snd_mpu401_uart_interrupt_tx(int irq, void *dev_id,
+                                        struct pt_regs *regs);
 
 int snd_mpu401_uart_new(struct snd_card *card,
                        int device,
                        unsigned short hardware,
                        unsigned long port,
-                       int integrated,
+                       unsigned int info_flags,
                        int irq,
                        int irq_flags,
                        struct snd_rawmidi ** rrawmidi);
index cd64d3eb9ec82f99ef5bb6b92cb20f550ba81490..4bf07ca9b17d625bcfc49b30bc5e13729faf089c 100644 (file)
@@ -95,17 +95,8 @@ static void snd_mpu401_uart_clear_rx(struct snd_mpu401 *mpu)
 #endif
 }
 
-static void _snd_mpu401_uart_interrupt(struct snd_mpu401 *mpu)
+static void uart_interrupt_tx(struct snd_mpu401 *mpu)
 {
-       spin_lock(&mpu->input_lock);
-       if (test_bit(MPU401_MODE_BIT_INPUT, &mpu->mode))
-               snd_mpu401_uart_input_read(mpu);
-       else
-               snd_mpu401_uart_clear_rx(mpu);
-       spin_unlock(&mpu->input_lock);
-       /* ok. for better Tx performance try do some output when
-        * input is done
-        */
        if (test_bit(MPU401_MODE_BIT_OUTPUT, &mpu->mode) &&
            test_bit(MPU401_MODE_BIT_OUTPUT_TRIGGER, &mpu->mode)) {
                spin_lock(&mpu->output_lock);
@@ -114,6 +105,22 @@ static void _snd_mpu401_uart_interrupt(struct snd_mpu401 *mpu)
        }
 }
 
+static void _snd_mpu401_uart_interrupt(struct snd_mpu401 *mpu)
+{
+       if (mpu->info_flags & MPU401_INFO_INPUT) {
+               spin_lock(&mpu->input_lock);
+               if (test_bit(MPU401_MODE_BIT_INPUT, &mpu->mode))
+                       snd_mpu401_uart_input_read(mpu);
+               else
+                       snd_mpu401_uart_clear_rx(mpu);
+               spin_unlock(&mpu->input_lock);
+       }
+       if (! (mpu->info_flags & MPU401_INFO_TX_IRQ))
+               /* ok. for better Tx performance try do some output
+                  when input is done */
+               uart_interrupt_tx(mpu);
+}
+
 /**
  * snd_mpu401_uart_interrupt - generic MPU401-UART interrupt handler
  * @irq: the irq number
@@ -135,6 +142,27 @@ irqreturn_t snd_mpu401_uart_interrupt(int irq, void *dev_id,
 
 EXPORT_SYMBOL(snd_mpu401_uart_interrupt);
 
+/**
+ * snd_mpu401_uart_interrupt_tx - generic MPU401-UART transmit irq handler
+ * @irq: the irq number
+ * @dev_id: mpu401 instance
+ * @regs: the reigster
+ *
+ * Processes the interrupt for MPU401-UART output.
+ */
+irqreturn_t snd_mpu401_uart_interrupt_tx(int irq, void *dev_id,
+                                        struct pt_regs *regs)
+{
+       struct snd_mpu401 *mpu = dev_id;
+       
+       if (mpu == NULL)
+               return IRQ_NONE;
+       uart_interrupt_tx(mpu);
+       return IRQ_HANDLED;
+}
+
+EXPORT_SYMBOL(snd_mpu401_uart_interrupt_tx);
+
 /*
  * timer callback
  * reprogram the timer and call the interrupt job
@@ -430,14 +458,16 @@ snd_mpu401_uart_output_trigger(struct snd_rawmidi_substream *substream, int up)
                 * since the output timer might have been removed in
                 * snd_mpu401_uart_output_write().
                 */
-               snd_mpu401_uart_add_timer(mpu, 0);
+               if (! (mpu->info_flags & MPU401_INFO_TX_IRQ))
+                       snd_mpu401_uart_add_timer(mpu, 0);
 
                /* output pending data */
                spin_lock_irqsave(&mpu->output_lock, flags);
                snd_mpu401_uart_output_write(mpu);
                spin_unlock_irqrestore(&mpu->output_lock, flags);
        } else {
-               snd_mpu401_uart_remove_timer(mpu, 0);
+               if (! (mpu->info_flags & MPU401_INFO_TX_IRQ))
+                       snd_mpu401_uart_remove_timer(mpu, 0);
                clear_bit(MPU401_MODE_BIT_OUTPUT_TRIGGER, &mpu->mode);
        }
 }
@@ -475,7 +505,7 @@ static void snd_mpu401_uart_free(struct snd_rawmidi *rmidi)
  * @device: the device index, zero-based
  * @hardware: the hardware type, MPU401_HW_XXXX
  * @port: the base address of MPU401 port
- * @integrated: non-zero if the port was already reserved by the chip
+ * @info_flags: bitflags MPU401_INFO_XXX
  * @irq: the irq number, -1 if no interrupt for mpu
  * @irq_flags: the irq request flags (SA_XXX), 0 if irq was already reserved.
  * @rrawmidi: the pointer to store the new rawmidi instance
@@ -490,17 +520,24 @@ static void snd_mpu401_uart_free(struct snd_rawmidi *rmidi)
  */
 int snd_mpu401_uart_new(struct snd_card *card, int device,
                        unsigned short hardware,
-                       unsigned long port, int integrated,
+                       unsigned long port,
+                       unsigned int info_flags,
                        int irq, int irq_flags,
                        struct snd_rawmidi ** rrawmidi)
 {
        struct snd_mpu401 *mpu;
        struct snd_rawmidi *rmidi;
+       int in_enable, out_enable;
        int err;
 
        if (rrawmidi)
                *rrawmidi = NULL;
-       if ((err = snd_rawmidi_new(card, "MPU-401U", device, 1, 1, &rmidi)) < 0)
+       if (! (info_flags & (MPU401_INFO_INPUT | MPU401_INFO_OUTPUT)))
+               info_flags |= MPU401_INFO_INPUT | MPU401_INFO_OUTPUT;
+       in_enable = (info_flags & MPU401_INFO_INPUT) ? 1 : 0;
+       out_enable = (info_flags & MPU401_INFO_OUTPUT) ? 1 : 0;
+       if ((err = snd_rawmidi_new(card, "MPU-401U", device,
+                                  out_enable, in_enable, &rmidi)) < 0)
                return err;
        mpu = kzalloc(sizeof(*mpu), GFP_KERNEL);
        if (mpu == NULL) {
@@ -514,7 +551,7 @@ int snd_mpu401_uart_new(struct snd_card *card, int device,
        spin_lock_init(&mpu->output_lock);
        spin_lock_init(&mpu->timer_lock);
        mpu->hardware = hardware;
-       if (!integrated) {
+       if (! (info_flags & MPU401_INFO_INTEGRATED)) {
                int res_size = hardware == MPU401_HW_PC98II ? 4 : 2;
                mpu->res = request_region(port, res_size, "MPU401 UART");
                if (mpu->res == NULL) {
@@ -525,15 +562,12 @@ int snd_mpu401_uart_new(struct snd_card *card, int device,
                        return -EBUSY;
                }
        }
-       switch (hardware) {
-       case MPU401_HW_AUREAL:
+       if (info_flags & MPU401_INFO_MMIO) {
                mpu->write = mpu401_write_mmio;
                mpu->read = mpu401_read_mmio;
-               break;
-       default:
+       } else {
                mpu->write = mpu401_write_port;
                mpu->read = mpu401_read_port;
-               break;
        }
        mpu->port = port;
        if (hardware == MPU401_HW_PC98II)
@@ -549,6 +583,7 @@ int snd_mpu401_uart_new(struct snd_card *card, int device,
                        return -EBUSY;
                }
        }
+       mpu->info_flags = info_flags;
        mpu->irq = irq;
        mpu->irq_flags = irq_flags;
        if (card->shortname[0])
@@ -556,13 +591,18 @@ int snd_mpu401_uart_new(struct snd_card *card, int device,
                         card->shortname);
        else
                sprintf(rmidi->name, "MPU-401 MIDI %d-%d",card->number, device);
-       snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT,
-                           &snd_mpu401_uart_output);
-       snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT,
-                           &snd_mpu401_uart_input);
-       rmidi->info_flags |= SNDRV_RAWMIDI_INFO_OUTPUT |
-                            SNDRV_RAWMIDI_INFO_INPUT |
-                            SNDRV_RAWMIDI_INFO_DUPLEX;
+       if (out_enable) {
+               snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_OUTPUT,
+                                   &snd_mpu401_uart_output);
+               rmidi->info_flags |= SNDRV_RAWMIDI_INFO_OUTPUT;
+       }
+       if (in_enable) {
+               snd_rawmidi_set_ops(rmidi, SNDRV_RAWMIDI_STREAM_INPUT,
+                                   &snd_mpu401_uart_input);
+               rmidi->info_flags |= SNDRV_RAWMIDI_INFO_INPUT;
+               if (out_enable)
+                       rmidi->info_flags |= SNDRV_RAWMIDI_INFO_DUPLEX;
+       }
        mpu->rmidi = rmidi;
        if (rrawmidi)
                *rrawmidi = rmidi;
index d2a856f0fde201d20e47da42d3960dea8d6537cd..27271c9446dc669e978ae806ca2fda5d44a8415f 100644 (file)
@@ -897,10 +897,9 @@ static int __devinit create_mpu401(struct snd_card *card, int devnum, unsigned l
        struct snd_rawmidi *rawmidi;
        int err;
 
-#define MPU401_SHARE_HARDWARE  1
        if ((err = snd_mpu401_uart_new(card, devnum,
                                       MPU401_HW_MPU401,
-                                      port, MPU401_SHARE_HARDWARE,
+                                      port, MPU401_INFO_INTEGRATED,
                                       irq, SA_INTERRUPT,
                                       &rawmidi)) == 0) {
                struct snd_mpu401 *mpu = (struct snd_mpu401 *) rawmidi->private_data;
index 60423b1c678b86fb3278ab11662d837379e9873a..a9f08066459a9122cb8170e04efa026ac49e0f22 100644 (file)
@@ -746,8 +746,8 @@ static int __devinit snd_card_als4000_probe(struct pci_dev *pci,
                card->shortname, chip->alt_port, chip->irq);
 
        if ((err = snd_mpu401_uart_new( card, 0, MPU401_HW_ALS4000,
-                                       gcr+0x30, 1, pci->irq, 0,
-                                       &chip->rmidi)) < 0) {
+                                       gcr+0x30, MPU401_INFO_INTEGRATED,
+                                       pci->irq, 0, &chip->rmidi)) < 0) {
                printk(KERN_ERR "als4000: no MPU-401 device at 0x%lx?\n", gcr+0x30);
                goto out_err;
        }
index 1e128a3c8d892d05f5c2d066406df527a3cf9c90..5a0c53530faee3bc10a5d2a2d8ad387fb88d3b92 100644 (file)
@@ -95,7 +95,8 @@ static int __devinit snd_vortex_midi(vortex_t * vortex)
        port = (unsigned long)(vortex->mmio + VORTEX_MIDI_DATA);
        if ((temp =
             snd_mpu401_uart_new(vortex->card, 0, MPU401_HW_AUREAL, port,
-                                1, 0, 0, &rmidi)) != 0) {
+                                MPU401_INFO_INTEGRATED | MPU401_INFO_MMIO,
+                                0, 0, &rmidi)) != 0) {
                hwwrite(vortex->mmio, VORTEX_CTRL,
                        (hwread(vortex->mmio, VORTEX_CTRL) &
                         ~CTRL_MIDI_PORT) & ~CTRL_MIDI_EN);
index e68056c815807fb411989da4d772180089edf0cf..6e62dafb66cd5f2725831ead36d3930caf1b8261 100644 (file)
@@ -1806,8 +1806,8 @@ snd_azf3328_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
        card->private_data = chip;
 
        if ((err = snd_mpu401_uart_new( card, 0, MPU401_HW_MPU401,
-                                       chip->mpu_port, 1, pci->irq, 0,
-                                       &chip->rmidi)) < 0) {
+                                       chip->mpu_port, MPU401_INFO_INTEGRATED,
+                                       pci->irq, 0, &chip->rmidi)) < 0) {
                snd_printk(KERN_ERR "azf3328: no MPU-401 device at 0x%lx?\n", chip->mpu_port);
                goto out_err;
        }
index cb475ada2ef1be1ccf94442744226edc412a64c0..79bc60a5204e440e95f96b6e2c0f76cd062d6206 100644 (file)
@@ -2981,7 +2981,9 @@ static int __devinit snd_cmipci_create(struct snd_card *card, struct pci_dev *pc
 
        if (iomidi > 0) {
                if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_CMIPCI,
-                                              iomidi, integrated_midi,
+                                              iomidi,
+                                              (integrated_midi ?
+                                               MPU401_INFO_INTEGRATED : 0),
                                               cm->irq, 0, &cm->rmidi)) < 0) {
                        printk(KERN_ERR "cmipci: no UART401 device at 0x%lx\n", iomidi);
                }
index 8f46190f24addb37424ed5b95102bc1b95959586..f61c4fa4ed623d2c1d1a4e53172d04a0d8c8c80c 100644 (file)
@@ -56,17 +56,16 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = {
        {}
 };
 
-static int index = SNDRV_DEFAULT_IDX1;
-static char *id = SNDRV_DEFAULT_STR1;
-/* for backward compatibility */
-static int enable; 
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
+static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
+static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
 
-module_param(index, int, 0444);
+module_param_array(index, int, NULL, 0444);
 MODULE_PARM_DESC(index, "Index value for " DRIVER_NAME);
-module_param(id, charp, 0444);
+module_param_array(id, charp, NULL, 0444);
 MODULE_PARM_DESC(id, "ID string for " DRIVER_NAME);
-module_param(enable, bool, 0444);
-MODULE_PARM_DESC(enable, "Enable for " DRIVER_NAME);
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable " DRIVER_NAME);
 
 static struct pci_device_id snd_cs5535audio_ids[] __devinitdata = {
        { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_CS5535_AUDIO) },
@@ -358,8 +357,12 @@ static int __devinit snd_cs5535audio_probe(struct pci_dev *pci,
 
        if (dev >= SNDRV_CARDS)
                return -ENODEV;
+       if (!enable[dev]) {
+               dev++;
+               return -ENOENT;
+       }
 
-       card = snd_card_new(index, id, THIS_MODULE, 0);
+       card = snd_card_new(index[dev], id[dev], THIS_MODULE, 0);
        if (card == NULL)
                return -ENOMEM;
 
index 6f9094ca4fb4b8b5780d1d30ca62e41e8d90d0a2..ca6603fe0b112fd72495754510daaf3a0180bbf0 100644 (file)
@@ -1756,7 +1756,8 @@ static int __devinit snd_es1938_probe(struct pci_dev *pci,
                }
        }
        if (snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
-                               chip->mpu_port, 1, chip->irq, 0, &chip->rmidi) < 0) {
+                               chip->mpu_port, MPU401_INFO_INTEGRATED,
+                               chip->irq, 0, &chip->rmidi) < 0) {
                printk(KERN_ERR "es1938: unable to initialize MPU-401\n");
        } else {
                // this line is vital for MIDI interrupt handling on ess-solo1
index f43bd380ac2882e552c6434b0faef6008864677f..bfa0876e715e87922995fc3e425e6bb08e6b1c67 100644 (file)
@@ -2727,7 +2727,8 @@ static int __devinit snd_es1968_probe(struct pci_dev *pci,
        }
        if (enable_mpu[dev]) {
                if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
-                                              chip->io_port + ESM_MPU401_PORT, 1,
+                                              chip->io_port + ESM_MPU401_PORT,
+                                              MPU401_INFO_INTEGRATED,
                                               chip->irq, 0, &chip->rmidi)) < 0) {
                        printk(KERN_WARNING "es1968: skipping MPU-401 MIDI support..\n");
                }
index 0ec90f377319686fd879a6e8f21a7f0d90152f79..0afa573dd2441556e8499e7baaeff29b64b868ad 100644 (file)
@@ -1448,7 +1448,8 @@ static int __devinit snd_card_fm801_probe(struct pci_dev *pci,
                return err;
        }
        if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_FM801,
-                                      FM801_REG(chip, MPU401_DATA), 1,
+                                      FM801_REG(chip, MPU401_DATA),
+                                      MPU401_INFO_INTEGRATED,
                                       chip->irq, 0, &chip->rmidi)) < 0) {
                snd_card_free(card);
                return err;
index 52de85e21b95652d2117bc4455490f52c0a2fdef..00e565e1db3a5b73cac9b966df850b68b81943c2 100644 (file)
@@ -2737,7 +2737,8 @@ static int __devinit snd_ice1712_probe(struct pci_dev *pci,
 
        if (! c->no_mpu401) {
                if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_ICE1712,
-                                              ICEREG(ice, MPU1_CTRL), 1,
+                                              ICEREG(ice, MPU1_CTRL),
+                                              MPU401_INFO_INTEGRATED,
                                               ice->irq, 0,
                                               &ice->rmidi[0])) < 0) {
                        snd_card_free(card);
@@ -2752,7 +2753,8 @@ static int __devinit snd_ice1712_probe(struct pci_dev *pci,
                if (ice->eeprom.data[ICE_EEP1_CODEC] & ICE1712_CFG_2xMPU401) {
                        /*  2nd port used  */
                        if ((err = snd_mpu401_uart_new(card, 1, MPU401_HW_ICE1712,
-                                                      ICEREG(ice, MPU2_CTRL), 1,
+                                                      ICEREG(ice, MPU2_CTRL),
+                                                      MPU401_INFO_INTEGRATED,
                                                       ice->irq, 0,
                                                       &ice->rmidi[1])) < 0) {
                                snd_card_free(card);
index 1031bcbf706445e4714164e3a8f5f0ae604e4d4e..34a58c629f47ebf715dcaddd3db5ce927dcfb94b 100644 (file)
@@ -2388,7 +2388,8 @@ static int __devinit snd_vt1724_probe(struct pci_dev *pci,
        if (! c->no_mpu401) {
                if (ice->eeprom.data[ICE_EEP2_SYSCONF] & VT1724_CFG_MPU401) {
                        if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_ICE1712,
-                                                      ICEREG1724(ice, MPU_CTRL), 1,
+                                                      ICEREG1724(ice, MPU_CTRL),
+                                                      MPU401_INFO_INTEGRATED,
                                                       ice->irq, 0,
                                                       &ice->rmidi[0])) < 0) {
                                snd_card_free(card);
index 1928e06b6d82939fab3a687c1d3dea69f39da794..1c344fbd964de4a76f9c7915ba3970b87d299aab 100644 (file)
@@ -2861,7 +2861,8 @@ snd_m3_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
 #if 0 /* TODO: not supported yet */
        /* TODO enable MIDI IRQ and I/O */
        err = snd_mpu401_uart_new(chip->card, 0, MPU401_HW_MPU401,
-                                 chip->iobase + MPU401_DATA_PORT, 1,
+                                 chip->iobase + MPU401_DATA_PORT,
+                                 MPU401_INFO_INTEGRATED,
                                  chip->irq, 0, &chip->rmidi);
        if (err < 0)
                printk(KERN_WARNING "maestro3: no MIDI support.\n");
index 51775706c843b93ed4d21b2c875f60d530ae0135..dcf4029483474bd3790b6ef45e7e71d434491d8b 100644 (file)
@@ -1456,7 +1456,7 @@ static int __devinit snd_sonic_probe(struct pci_dev *pci,
                return err;
        }
        if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_SONICVIBES,
-                                      sonic->midi_port, 1,
+                                      sonic->midi_port, MPU401_INFO_INTEGRATED,
                                       sonic->irq, 0,
                                       &midi_uart)) < 0) {
                snd_card_free(card);
index 9624a5f2b87599044201784a48fc87bd1ee22656..5629b7eba96d3845f2aa05a9ff7bc22db78d4fa9 100644 (file)
@@ -148,7 +148,8 @@ static int __devinit snd_trident_probe(struct pci_dev *pci,
        }
        if (trident->device != TRIDENT_DEVICE_ID_SI7018 &&
            (err = snd_mpu401_uart_new(card, 0, MPU401_HW_TRID4DWAVE,
-                                      trident->midi_port, 1,
+                                      trident->midi_port,
+                                      MPU401_INFO_INTEGRATED,
                                       trident->irq, 0, &trident->rmidi)) < 0) {
                snd_card_free(card);
                return err;
index a1b777e79c5951f9cfffa53966c1c418998a7c93..12ce22ef16e3b3038d919d7e9c994f74d34a2fb6 100644 (file)
@@ -1973,7 +1973,7 @@ static int __devinit snd_via686_init_misc(struct via82xx *chip)
        pci_write_config_byte(chip->pci, VIA_PNP_CONTROL, legacy_cfg);
        if (chip->mpu_res) {
                if (snd_mpu401_uart_new(chip->card, 0, MPU401_HW_VIA686A,
-                                       mpu_port, 1,
+                                       mpu_port, MPU401_INFO_INTEGRATED,
                                        chip->irq, 0, &chip->rmidi) < 0) {
                        printk(KERN_WARNING "unable to initialize MPU-401"
                               " at 0x%lx, skipping\n", mpu_port);
index 65ebf5f1933a4639b4f3b0cd870516e00ed3557c..26aa775b7b69d17cddc05bd852fa350d4256fd7d 100644 (file)
@@ -308,7 +308,8 @@ static int __devinit snd_card_ymfpci_probe(struct pci_dev *pci,
        }
        if (chip->mpu_res) {
                if ((err = snd_mpu401_uart_new(card, 0, MPU401_HW_YMFPCI,
-                                              mpu_port[dev], 1,
+                                              mpu_port[dev],
+                                              MPU401_INFO_INTEGRATED,
                                               pci->irq, 0, &chip->rawmidi)) < 0) {
                        printk(KERN_WARNING "ymfpci: cannot initialize MPU401 at 0x%lx, skipping...\n", mpu_port[dev]);
                        legacy_ctrl &= ~YMFPCI_LEGACY_MIEN; /* disable MPU401 irq */