drm/i915/intel_i2c: gmbus disabled and reserved ports are invalid
authorDaniel Kurtz <djkurtz@chromium.org>
Tue, 27 Mar 2012 18:36:15 +0000 (02:36 +0800)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Wed, 28 Mar 2012 13:02:53 +0000 (15:02 +0200)
There is no GMBUS "disabled" port 0, nor "reserved" port 7.
For the other 6 ports there is a fixed 1:1 mapping between pin pairs and
gmbus ports, which means every real gmbus port has a gpio pin.

Given these realizations, clean up gmbus initialization.

Tested on Sandybridge (gen 6, PCH == CougarPoint) hardware.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/i915_reg.h
drivers/gpu/drm/i915/intel_i2c.c

index 44e6430af3d49fd0556dff530fd5bc206eda847f..c5ad7b96b065a7f9086d715d29fe3647cae8183b 100644 (file)
@@ -303,7 +303,6 @@ struct intel_fbc_work;
 struct intel_gmbus {
        struct i2c_adapter adapter;
        bool force_bit;
-       bool has_gpio;
        u32 reg0;
        u32 gpio_reg;
        struct i2c_algo_bit_data bit_algo;
@@ -1344,7 +1343,7 @@ extern int intel_setup_gmbus(struct drm_device *dev);
 extern void intel_teardown_gmbus(struct drm_device *dev);
 extern inline bool intel_gmbus_is_port_valid(unsigned port)
 {
-       return (port >= GMBUS_PORT_DISABLED && port <= GMBUS_PORT_RESERVED);
+       return (port >= GMBUS_PORT_SSC && port <= GMBUS_PORT_DPD);
 }
 
 extern struct i2c_adapter *intel_gmbus_get_adapter(
index accd8ee48f9d6ee003cf89c7645c3a4b8436355c..a8d218ca7d1d04781a2dc08540564982d6e52e42 100644 (file)
 #define   GMBUS_PORT_DPB       5 /* SDVO, HDMIB */
 #define   GMBUS_PORT_DPD       6 /* HDMID */
 #define   GMBUS_PORT_RESERVED  7 /* 7 reserved */
-#define   GMBUS_NUM_PORTS      8
+#define   GMBUS_NUM_PORTS      (GMBUS_PORT_DPD - GMBUS_PORT_SSC + 1)
 #define GMBUS1                 0x5104 /* command/status */
 #define   GMBUS_SW_CLR_INT     (1<<31)
 #define   GMBUS_SW_RDY         (1<<30)
index 2f65d01340ffd72864ddfbe175204a2bcbd9ad58..dcde6f64777a9f88c24c533940290dd7c44a6da2 100644 (file)
 #include "i915_drm.h"
 #include "i915_drv.h"
 
+struct gmbus_port {
+       const char *name;
+       int reg;
+};
+
+static const struct gmbus_port gmbus_ports[] = {
+       { "ssc", GPIOB },
+       { "vga", GPIOA },
+       { "panel", GPIOC },
+       { "dpc", GPIOD },
+       { "dpb", GPIOE },
+       { "dpd", GPIOF },
+};
+
 /* Intel GPIO access functions */
 
 #define I2C_RISEFALL_TIME 10
@@ -166,29 +180,16 @@ intel_gpio_post_xfer(struct i2c_adapter *adapter)
        intel_i2c_quirk_set(dev_priv, false);
 }
 
-static bool
+static void
 intel_gpio_setup(struct intel_gmbus *bus, u32 pin)
 {
        struct drm_i915_private *dev_priv = bus->dev_priv;
-       static const int map_pin_to_reg[] = {
-               0,
-               GPIOB,
-               GPIOA,
-               GPIOC,
-               GPIOD,
-               GPIOE,
-               GPIOF,
-               0,
-       };
        struct i2c_algo_bit_data *algo;
 
-       if (pin >= ARRAY_SIZE(map_pin_to_reg) || !map_pin_to_reg[pin])
-               return false;
-
        algo = &bus->bit_algo;
 
-       bus->gpio_reg = map_pin_to_reg[pin];
-       bus->gpio_reg += dev_priv->gpio_mmio_base;
+       /* -1 to map pin pair to gmbus index */
+       bus->gpio_reg = dev_priv->gpio_mmio_base + gmbus_ports[pin - 1].reg;
 
        bus->adapter.algo_data = algo;
        algo->setsda = set_data;
@@ -200,8 +201,6 @@ intel_gpio_setup(struct intel_gmbus *bus, u32 pin)
        algo->udelay = I2C_RISEFALL_TIME;
        algo->timeout = usecs_to_jiffies(2200);
        algo->data = bus;
-
-       return true;
 }
 
 static int
@@ -351,15 +350,9 @@ timeout:
                 bus->adapter.name, bus->reg0 & 0xff);
        I915_WRITE(GMBUS0 + reg_offset, 0);
 
-       /* Hardware may not support GMBUS over these pins?
-        * Try GPIO bitbanging instead.
-        */
-       if (!bus->has_gpio) {
-               ret = -EIO;
-       } else {
-               bus->force_bit = true;
-               ret = i2c_bit_algo.master_xfer(adapter, msgs, num);
-       }
+       /* Hardware may not support GMBUS over these pins? Try GPIO bitbanging instead. */
+       bus->force_bit = true;
+       ret = i2c_bit_algo.master_xfer(adapter, msgs, num);
 
 out:
        mutex_unlock(&dev_priv->gmbus_mutex);
@@ -386,16 +379,6 @@ static const struct i2c_algorithm gmbus_algorithm = {
  */
 int intel_setup_gmbus(struct drm_device *dev)
 {
-       static const char *names[GMBUS_NUM_PORTS] = {
-               "disabled",
-               "ssc",
-               "vga",
-               "panel",
-               "dpc",
-               "dpb",
-               "dpd",
-               "reserved",
-       };
        struct drm_i915_private *dev_priv = dev->dev_private;
        int ret, i;
 
@@ -413,13 +396,14 @@ int intel_setup_gmbus(struct drm_device *dev)
 
        for (i = 0; i < GMBUS_NUM_PORTS; i++) {
                struct intel_gmbus *bus = &dev_priv->gmbus[i];
+               u32 port = i + 1; /* +1 to map gmbus index to pin pair */
 
                bus->adapter.owner = THIS_MODULE;
                bus->adapter.class = I2C_CLASS_DDC;
                snprintf(bus->adapter.name,
                         sizeof(bus->adapter.name),
                         "i915 gmbus %s",
-                        names[i]);
+                        gmbus_ports[i].name);
 
                bus->adapter.dev.parent = &dev->pdev->dev;
                bus->dev_priv = dev_priv;
@@ -430,9 +414,9 @@ int intel_setup_gmbus(struct drm_device *dev)
                        goto err;
 
                /* By default use a conservative clock rate */
-               bus->reg0 = i | GMBUS_RATE_100KHZ;
+               bus->reg0 = port | GMBUS_RATE_100KHZ;
 
-               bus->has_gpio = intel_gpio_setup(bus, i);
+               intel_gpio_setup(bus, port);
        }
 
        intel_i2c_reset(dev_priv->dev);
@@ -453,8 +437,9 @@ struct i2c_adapter *intel_gmbus_get_adapter(struct drm_i915_private *dev_priv,
                                            unsigned port)
 {
        WARN_ON(!intel_gmbus_is_port_valid(port));
+       /* -1 to map pin pair to gmbus index */
        return (intel_gmbus_is_port_valid(port)) ?
-               &dev_priv->gmbus[port].adapter : NULL;
+               &dev_priv->gmbus[port - 1].adapter : NULL;
 }
 
 void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed)
@@ -468,8 +453,7 @@ void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit)
 {
        struct intel_gmbus *bus = to_intel_gmbus(adapter);
 
-       if (bus->has_gpio)
-               bus->force_bit = force_bit;
+       bus->force_bit = force_bit;
 }
 
 void intel_teardown_gmbus(struct drm_device *dev)