usb: dwc3: gadget: clear SUSPHY bit before ep cmds
authorFelipe Balbi <felipe.balbi@linux.intel.com>
Mon, 4 Apr 2016 06:19:17 +0000 (09:19 +0300)
committerFelipe Balbi <felipe.balbi@linux.intel.com>
Mon, 18 Apr 2016 12:23:41 +0000 (15:23 +0300)
Synopsys Databook 2.60a has a note that if we're
sending an endpoint command we _must_ make sure that
DWC3_GUSB2PHY(n).SUSPHY bit is cleared.

This patch implements that particular detail.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
drivers/usb/dwc3/gadget.c

index eb760b275004b740e1035d1ff453ea2c0a4f0862..79aad1061cdc095f4606bd3c771e903cd85deed4 100644 (file)
@@ -227,10 +227,27 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
        struct dwc3_ep          *dep = dwc->eps[ep];
        u32                     timeout = 500;
        u32                     reg;
+
+       int                     susphy = false;
        int                     ret = -EINVAL;
 
        trace_dwc3_gadget_ep_cmd(dep, cmd, params);
 
+       /*
+        * Synopsys Databook 2.60a states, on section 6.3.2.5.[1-8], that if
+        * we're issuing an endpoint command, we must check if
+        * GUSB2PHYCFG.SUSPHY bit is set. If it is, then we need to clear it.
+        *
+        * We will also set SUSPHY bit to what it was before returning as stated
+        * by the same section on Synopsys databook.
+        */
+       reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+       if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
+               susphy = true;
+               reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+               dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+       }
+
        dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0);
        dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1);
        dwc3_writel(dwc->regs, DWC3_DEPCMDPAR2(ep), params->param2);
@@ -263,6 +280,12 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
                udelay(1);
        } while (1);
 
+       if (unlikely(susphy)) {
+               reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+               reg |= DWC3_GUSB2PHYCFG_SUSPHY;
+               dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+       }
+
        return ret;
 }