bool wedge;
};
+enum atx_type {
+ ISP1301,
+ STOTG04,
+};
+
/*
* Common UDC structure
*/
u8 last_vbus;
int pullup;
int poweron;
+ enum atx_type atx;
/* Work queues related to I2C support */
struct work_struct pullup_job;
/* Primary initialization sequence for the ISP1301 transceiver */
static void isp1301_udc_configure(struct lpc32xx_udc *udc)
{
+ u8 value;
+ s32 vendor, product;
+
+ vendor = i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x00);
+ product = i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x02);
+
+ if (vendor == 0x0483 && product == 0xa0c4)
+ udc->atx = STOTG04;
+
/* LPC32XX only supports DAT_SE0 USB mode */
/* This sequence is important */
*/
i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
(ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
+
+ value = MC2_BI_DI;
+ if (udc->atx != STOTG04)
+ value |= MC2_SPD_SUSP_CTRL;
i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
- ISP1301_I2C_MODE_CONTROL_2, (MC2_BI_DI | MC2_SPD_SUSP_CTRL));
+ ISP1301_I2C_MODE_CONTROL_2, value);
/* Driver VBUS_DRV high or low depending on board setup */
if (udc->board->vbus_drv_pol != 0)
i2c_smbus_write_byte_data(udc->isp1301_i2c_client,
ISP1301_I2C_INTERRUPT_RISING, INT_SESS_VLD | INT_VBUS_VLD);
- dev_info(udc->dev, "ISP1301 Vendor ID : 0x%04x\n",
- i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x00));
- dev_info(udc->dev, "ISP1301 Product ID : 0x%04x\n",
- i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x02));
+ dev_info(udc->dev, "ISP1301 Vendor ID : 0x%04x\n", vendor);
+ dev_info(udc->dev, "ISP1301 Product ID : 0x%04x\n", product);
dev_info(udc->dev, "ISP1301 Version ID : 0x%04x\n",
i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x14));
+
}
/* Enables or disables the USB device pullup via the ISP1301 transceiver */
/* Powers up or down the ISP1301 transceiver */
static void isp1301_set_powerstate(struct lpc32xx_udc *udc, int enable)
{
+ /* There is no "global power down" register for stotg04 */
+ if (udc->atx == STOTG04)
+ return;
+
if (enable != 0)
/* Power up ISP1301 - this ISP1301 will automatically wakeup
when VBUS is detected */