staging: comedi: das1800: use comedi_request_region()
authorH Hartley Sweeten <hsweeten@visionengravers.com>
Tue, 9 Apr 2013 23:16:42 +0000 (16:16 -0700)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Thu, 11 Apr 2013 19:47:39 +0000 (12:47 -0700)
Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

This driver does a second request_region() for the additional I/O space
used on the 'ao' type boards. Modify the error message if that request
fails so it matches to format of the comedi_request_region() message.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/comedi/drivers/das1800.c

index 1e90287303d874d87aa8b0b2eeb4162d29d4685c..cf265c1be7d86e9559597ebc5dafe84900be58b5 100644 (file)
@@ -1511,7 +1511,6 @@ static int das1800_attach(struct comedi_device *dev,
        const struct das1800_board *thisboard = comedi_board(dev);
        struct das1800_private *devpriv;
        struct comedi_subdevice *s;
-       unsigned long iobase = it->options[0];
        unsigned int irq = it->options[1];
        unsigned int dma0 = it->options[2];
        unsigned int dma1 = it->options[3];
@@ -1524,31 +1523,9 @@ static int das1800_attach(struct comedi_device *dev,
                return -ENOMEM;
        dev->private = devpriv;
 
-       printk(KERN_DEBUG "comedi%d: %s: io 0x%lx", dev->minor,
-              dev->driver->driver_name, iobase);
-       if (irq) {
-               printk(KERN_CONT ", irq %u", irq);
-               if (dma0) {
-                       printk(KERN_CONT ", dma %u", dma0);
-                       if (dma1)
-                               printk(KERN_CONT " and %u", dma1);
-               }
-       }
-       printk(KERN_CONT "\n");
-
-       if (iobase == 0) {
-               dev_err(dev->class_dev, "io base address required\n");
-               return -EINVAL;
-       }
-
-       /* check if io addresses are available */
-       if (!request_region(iobase, DAS1800_SIZE, dev->driver->driver_name)) {
-               printk
-                   (" I/O port conflict: failed to allocate ports 0x%lx to 0x%lx\n",
-                    iobase, iobase + DAS1800_SIZE - 1);
-               return -EIO;
-       }
-       dev->iobase = iobase;
+       retval = comedi_request_region(dev, it->options[0], DAS1800_SIZE);
+       if (retval)
+               return retval;
 
        board = das1800_probe(dev);
        if (board < 0) {
@@ -1562,12 +1539,14 @@ static int das1800_attach(struct comedi_device *dev,
 
        /*  if it is an 'ao' board with fancy analog out then we need extra io ports */
        if (thisboard->ao_ability == 2) {
-               iobase2 = iobase + IOBASE2;
-               if (!request_region(iobase2, DAS1800_SIZE,
-                                   dev->driver->driver_name)) {
-                       printk
-                           (" I/O port conflict: failed to allocate ports 0x%lx to 0x%lx\n",
-                            iobase2, iobase2 + DAS1800_SIZE - 1);
+               iobase2 = dev->iobase + IOBASE2;
+               if (!request_region(iobase2, DAS1800_SIZE, dev->board_name)) {
+                       release_region(dev->iobase, DAS1800_SIZE);
+                       dev_warn(dev->class_dev,
+                                "%s: I/O port conflict (%#lx,%d)\n",
+                                dev->board_name,
+                                iobase2, DAS1800_SIZE);
+                       dev->iobase = 0;
                        return -EIO;
                }
                devpriv->iobase2 = iobase2;