[media] rtl2830: convert driver to kernel I2C model
authorAntti Palosaari <crope@iki.fi>
Sun, 7 Dec 2014 07:07:29 +0000 (04:07 -0300)
committerMauro Carvalho Chehab <mchehab@osg.samsung.com>
Mon, 2 Feb 2015 19:47:32 +0000 (17:47 -0200)
Convert driver to kernel I2C model. Old DVB proprietary model is
still left there also.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
drivers/media/dvb-frontends/Kconfig
drivers/media/dvb-frontends/rtl2830.c
drivers/media/dvb-frontends/rtl2830.h
drivers/media/dvb-frontends/rtl2830_priv.h

index 6c75418222e221dd3cc775379a6eb1527148ab2c..e8827fc1ca110f5905981a244baf9c5744340cc9 100644 (file)
@@ -443,7 +443,7 @@ config DVB_CXD2820R
 
 config DVB_RTL2830
        tristate "Realtek RTL2830 DVB-T"
-       depends on DVB_CORE && I2C
+       depends on DVB_CORE && I2C && I2C_MUX
        default m if !MEDIA_SUBDRV_AUTOSELECT
        help
          Say Y when you want to support this frontend.
index 50e8b63e5169bad938b1fc8b79e0871a619364d3..ec4a19c6309034eb75f2887d975d6d5d42ffe6a8 100644 (file)
@@ -767,6 +767,173 @@ static struct dvb_frontend_ops rtl2830_ops = {
        .read_signal_strength = rtl2830_read_signal_strength,
 };
 
+/*
+ * I2C gate/repeater logic
+ * We must use unlocked i2c_transfer() here because I2C lock is already taken
+ * by tuner driver. Gate is closed automatically after single I2C xfer.
+ */
+static int rtl2830_select(struct i2c_adapter *adap, void *mux_priv, u32 chan_id)
+{
+       struct i2c_client *client = mux_priv;
+       struct rtl2830_priv *priv = i2c_get_clientdata(client);
+       struct i2c_msg select_reg_page_msg[1] = {
+               {
+                       .addr = priv->cfg.i2c_addr,
+                       .flags = 0,
+                       .len = 2,
+                       .buf = "\x00\x01",
+               }
+       };
+       struct i2c_msg gate_open_msg[1] = {
+               {
+                       .addr = priv->cfg.i2c_addr,
+                       .flags = 0,
+                       .len = 2,
+                       .buf = "\x01\x08",
+               }
+       };
+       int ret;
+
+       /* select register page */
+       ret = __i2c_transfer(adap, select_reg_page_msg, 1);
+       if (ret != 1) {
+               dev_warn(&client->dev, "i2c write failed %d\n", ret);
+               if (ret >= 0)
+                       ret = -EREMOTEIO;
+               goto err;
+       }
+
+       priv->page = 1;
+
+       /* open tuner I2C repeater for 1 xfer, closes automatically */
+       ret = __i2c_transfer(adap, gate_open_msg, 1);
+       if (ret != 1) {
+               dev_warn(&client->dev, "i2c write failed %d\n", ret);
+               if (ret >= 0)
+                       ret = -EREMOTEIO;
+               goto err;
+       }
+
+       return 0;
+
+err:
+       dev_dbg(&client->dev, "%s: failed=%d\n", __func__, ret);
+       return ret;
+}
+
+static struct dvb_frontend *rtl2830_get_dvb_frontend(struct i2c_client *client)
+{
+       struct rtl2830_priv *priv = i2c_get_clientdata(client);
+
+       dev_dbg(&client->dev, "\n");
+
+       return &priv->fe;
+}
+
+static struct i2c_adapter *rtl2830_get_i2c_adapter(struct i2c_client *client)
+{
+       struct rtl2830_priv *priv = i2c_get_clientdata(client);
+
+       dev_dbg(&client->dev, "\n");
+
+       return priv->adapter;
+}
+
+static int rtl2830_probe(struct i2c_client *client,
+               const struct i2c_device_id *id)
+{
+       struct rtl2830_platform_data *pdata = client->dev.platform_data;
+       struct i2c_adapter *i2c = client->adapter;
+       struct rtl2830_priv *priv;
+       int ret;
+       u8 u8tmp;
+
+       dev_dbg(&client->dev, "\n");
+
+       if (pdata == NULL) {
+               ret = -EINVAL;
+               goto err;
+       }
+
+       /* allocate memory for the internal state */
+       priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+       if (priv == NULL) {
+               ret = -ENOMEM;
+               goto err;
+       }
+
+       /* setup the state */
+       i2c_set_clientdata(client, priv);
+       priv->i2c = i2c;
+       priv->sleeping = true;
+       priv->cfg.i2c_addr = client->addr;
+       priv->cfg.xtal = pdata->clk;
+       priv->cfg.spec_inv = pdata->spec_inv;
+       priv->cfg.vtop = pdata->vtop;
+       priv->cfg.krf = pdata->krf;
+       priv->cfg.agc_targ_val = pdata->agc_targ_val;
+
+       /* check if the demod is there */
+       ret = rtl2830_rd_reg(priv, 0x000, &u8tmp);
+       if (ret)
+               goto err_kfree;
+
+       /* create muxed i2c adapter for tuner */
+       priv->adapter = i2c_add_mux_adapter(client->adapter, &client->dev,
+                       client, 0, 0, 0, rtl2830_select, NULL);
+       if (priv->adapter == NULL) {
+               ret = -ENODEV;
+               goto err_kfree;
+       }
+
+       /* create dvb frontend */
+       memcpy(&priv->fe.ops, &rtl2830_ops, sizeof(priv->fe.ops));
+       priv->fe.ops.release = NULL;
+       priv->fe.demodulator_priv = priv;
+
+       /* setup callbacks */
+       pdata->get_dvb_frontend = rtl2830_get_dvb_frontend;
+       pdata->get_i2c_adapter = rtl2830_get_i2c_adapter;
+
+       dev_info(&client->dev, "Realtek RTL2830 successfully attached\n");
+       return 0;
+
+err_kfree:
+       kfree(priv);
+err:
+       dev_dbg(&client->dev, "failed=%d\n", ret);
+       return ret;
+}
+
+static int rtl2830_remove(struct i2c_client *client)
+{
+       struct rtl2830_priv *priv = i2c_get_clientdata(client);
+
+       dev_dbg(&client->dev, "\n");
+
+       i2c_del_mux_adapter(priv->adapter);
+       kfree(priv);
+       return 0;
+}
+
+static const struct i2c_device_id rtl2830_id_table[] = {
+       {"rtl2830", 0},
+       {}
+};
+MODULE_DEVICE_TABLE(i2c, rtl2830_id_table);
+
+static struct i2c_driver rtl2830_driver = {
+       .driver = {
+               .owner  = THIS_MODULE,
+               .name   = "rtl2830",
+       },
+       .probe          = rtl2830_probe,
+       .remove         = rtl2830_remove,
+       .id_table       = rtl2830_id_table,
+};
+
+module_i2c_driver(rtl2830_driver);
+
 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
 MODULE_DESCRIPTION("Realtek RTL2830 DVB-T demodulator driver");
 MODULE_LICENSE("GPL");
index 3313847fb0be559da959f2976b31e1c1eba549cc..b925ea5147e62393d8ba7e9d5bb469c11b49f677 100644 (file)
 #include <linux/kconfig.h>
 #include <linux/dvb/frontend.h>
 
+struct rtl2830_platform_data {
+       /*
+        * Clock frequency.
+        * Hz
+        * 4000000, 16000000, 25000000, 28800000
+        */
+       u32 clk;
+
+       /*
+        * Spectrum inversion.
+        */
+       bool spec_inv;
+
+       /*
+        */
+       u8 vtop;
+
+       /*
+        */
+       u8 krf;
+
+       /*
+        */
+       u8 agc_targ_val;
+
+       /*
+        */
+       struct dvb_frontend* (*get_dvb_frontend)(struct i2c_client *);
+       struct i2c_adapter* (*get_i2c_adapter)(struct i2c_client *);
+};
+
 struct rtl2830_config {
        /*
         * Demodulator I2C address.
index fab10ecb3c3b18f6e3bb1f5a249f2a686fbf021c..1a78351fe693ffde59034eac5ba8273c5ff1654d 100644 (file)
 #include "dvb_frontend.h"
 #include "dvb_math.h"
 #include "rtl2830.h"
+#include <linux/i2c-mux.h>
 
 struct rtl2830_priv {
+       struct i2c_adapter *adapter;
        struct i2c_adapter *i2c;
        struct dvb_frontend fe;
        struct rtl2830_config cfg;