Felix Moeller <felix@derklecks.de>
Filipe Lautert <filipe@icewall.org>
Franck Bui-Huu <vagabon.xyz@gmail.com>
+Frank Rowand <frowand.list@gmail.com> <frowand@mvista.com>
+Frank Rowand <frowand.list@gmail.com> <frank.rowand@am.sony.com>
+Frank Rowand <frowand.list@gmail.com> <frank.rowand@sonymobile.com>
Frank Zago <fzago@systemfabricworks.com>
Greg Kroah-Hartman <greg@echidna.(none)>
Greg Kroah-Hartman <gregkh@suse.de>
Jeff Garzik <jgarzik@pretzel.yyz.us>
Jens Axboe <axboe@suse.de>
Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
+John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
John Stultz <johnstul@us.ibm.com>
<josh@joshtriplett.org> <josh@freedesktop.org>
<josh@joshtriplett.org> <josh@kernel.org>
Kenneth W Chen <kenneth.w.chen@intel.com>
Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
Koushik <raghavendra.koushik@neterion.com>
+Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski.k@gmail.com>
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Leonid I Ananiev <leonid.i.ananiev@intel.com>
Linas Vepstas <linas@austin.ibm.com>
The ARC HS can be configured with a pipeline performance monitor for counting
CPU and cache events like cache misses and hits. Like conventional PCT there
-are 100+ hardware conditions dynamically mapped to upto 32 counters.
+are 100+ hardware conditions dynamically mapped to up to 32 counters.
It also supports overflow interrupts.
Required properties:
The ARC700 can be configured with a pipeline performance monitor for counting
CPU and cache events like cache misses and hits. Like conventional PCT there
-are 100+ hardware conditions dynamically mapped to upto 32 counters
+are 100+ hardware conditions dynamically mapped to up to 32 counters
Note that:
* The ARC 700 PCT does not support interrupts; although HW events may be
can be one of:
"allwinner,sun6i-a31"
"allwinner,sun8i-a23"
- "arm,psci"
"arm,realview-smp"
"brcm,bcm-nsp-smp"
"brcm,brahma-b15"
- target-supply : regulator for SATA target power
- phys : reference to the SATA PHY node
- phy-names : must be "sata-phy"
+- ports-implemented : Mask that indicates which ports that the HBA supports
+ are available for software to use. Useful if PORTS_IMPL
+ is not programmed by the BIOS, which is true with
+ some embedded SOC's.
Required properties when using sub-nodes:
- #address-cells : number of cells to encode an address
--- /dev/null
+
+* Samsung Exynos NoC (Network on Chip) Probe device
+
+The Samsung Exynos542x SoC has NoC (Network on Chip) Probe for NoC bus.
+NoC provides the primitive values to get the performance data. The packets
+that the Network on Chip (NoC) probes detects are transported over
+the network infrastructure to observer units. You can configure probes to
+capture packets with header or data on the data request response network,
+or as traffic debug or statistic collectors. Exynos542x bus has multiple
+NoC probes to provide bandwidth information about behavior of the SoC
+that you can use while analyzing system performance.
+
+Required properties:
+- compatible: Should be "samsung,exynos5420-nocp"
+- reg: physical base address of each NoC Probe and length of memory mapped region.
+
+Optional properties:
+- clock-names : the name of clock used by the NoC Probe, "nocp"
+- clocks : phandles for clock specified in "clock-names" property
+
+Example : NoC Probe nodes in Device Tree are listed below.
+
+ nocp_mem0_0: nocp@10CA1000 {
+ compatible = "samsung,exynos5420-nocp";
+ reg = <0x10CA1000 0x200>;
+ };
--- /dev/null
+* Generic Exynos Bus frequency device
+
+The Samsung Exynos SoC has many buses for data transfer between DRAM
+and sub-blocks in SoC. Most Exynos SoCs share the common architecture
+for buses. Generally, each bus of Exynos SoC includes a source clock
+and a power line, which are able to change the clock frequency
+of the bus in runtime. To monitor the usage of each bus in runtime,
+the driver uses the PPMU (Platform Performance Monitoring Unit), which
+is able to measure the current load of sub-blocks.
+
+The Exynos SoC includes the various sub-blocks which have the each AXI bus.
+The each AXI bus has the owned source clock but, has not the only owned
+power line. The power line might be shared among one more sub-blocks.
+So, we can divide into two type of device as the role of each sub-block.
+There are two type of bus devices as following:
+- parent bus device
+- passive bus device
+
+Basically, parent and passive bus device share the same power line.
+The parent bus device can only change the voltage of shared power line
+and the rest bus devices (passive bus device) depend on the decision of
+the parent bus device. If there are three blocks which share the VDD_xxx
+power line, Only one block should be parent device and then the rest blocks
+should depend on the parent device as passive device.
+
+ VDD_xxx |--- A block (parent)
+ |--- B block (passive)
+ |--- C block (passive)
+
+There are a little different composition among Exynos SoC because each Exynos
+SoC has different sub-blocks. Therefore, such difference should be specified
+in devicetree file instead of each device driver. In result, this driver
+is able to support the bus frequency for all Exynos SoCs.
+
+Required properties for all bus devices:
+- compatible: Should be "samsung,exynos-bus".
+- clock-names : the name of clock used by the bus, "bus".
+- clocks : phandles for clock specified in "clock-names" property.
+- operating-points-v2: the OPP table including frequency/voltage information
+ to support DVFS (Dynamic Voltage/Frequency Scaling) feature.
+
+Required properties only for parent bus device:
+- vdd-supply: the regulator to provide the buses with the voltage.
+- devfreq-events: the devfreq-event device to monitor the current utilization
+ of buses.
+
+Required properties only for passive bus device:
+- devfreq: the parent bus device.
+
+Optional properties only for parent bus device:
+- exynos,saturation-ratio: the percentage value which is used to calibrate
+ the performance count against total cycle count.
+- exynos,voltage-tolerance: the percentage value for bus voltage tolerance
+ which is used to calculate the max voltage.
+
+Detailed correlation between sub-blocks and power line according to Exynos SoC:
+- In case of Exynos3250, there are two power line as following:
+ VDD_MIF |--- DMC
+
+ VDD_INT |--- LEFTBUS (parent device)
+ |--- PERIL
+ |--- MFC
+ |--- G3D
+ |--- RIGHTBUS
+ |--- PERIR
+ |--- FSYS
+ |--- LCD0
+ |--- PERIR
+ |--- ISP
+ |--- CAM
+
+- In case of Exynos4210, there is one power line as following:
+ VDD_INT |--- DMC (parent device)
+ |--- LEFTBUS
+ |--- PERIL
+ |--- MFC(L)
+ |--- G3D
+ |--- TV
+ |--- LCD0
+ |--- RIGHTBUS
+ |--- PERIR
+ |--- MFC(R)
+ |--- CAM
+ |--- FSYS
+ |--- GPS
+ |--- LCD0
+ |--- LCD1
+
+- In case of Exynos4x12, there are two power line as following:
+ VDD_MIF |--- DMC
+
+ VDD_INT |--- LEFTBUS (parent device)
+ |--- PERIL
+ |--- MFC(L)
+ |--- G3D
+ |--- TV
+ |--- IMAGE
+ |--- RIGHTBUS
+ |--- PERIR
+ |--- MFC(R)
+ |--- CAM
+ |--- FSYS
+ |--- GPS
+ |--- LCD0
+ |--- ISP
+
+- In case of Exynos5422, there are two power line as following:
+ VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller)
+ |--- DREX 1
+
+ VDD_INT |--- NoC_Core (parent device)
+ |--- G2D
+ |--- G3D
+ |--- DISP1
+ |--- NoC_WCORE
+ |--- GSCL
+ |--- MSCL
+ |--- ISP
+ |--- MFC
+ |--- GEN
+ |--- PERIS
+ |--- PERIC
+ |--- FSYS
+ |--- FSYS2
+
+Example1:
+ Show the AXI buses of Exynos3250 SoC. Exynos3250 divides the buses to
+ power line (regulator). The MIF (Memory Interface) AXI bus is used to
+ transfer data between DRAM and CPU and uses the VDD_MIF regulator.
+
+ - MIF (Memory Interface) block
+ : VDD_MIF |--- DMC (Dynamic Memory Controller)
+
+ - INT (Internal) block
+ : VDD_INT |--- LEFTBUS (parent device)
+ |--- PERIL
+ |--- MFC
+ |--- G3D
+ |--- RIGHTBUS
+ |--- FSYS
+ |--- LCD0
+ |--- PERIR
+ |--- ISP
+ |--- CAM
+
+ - MIF bus's frequency/voltage table
+ -----------------------
+ |Lv| Freq | Voltage |
+ -----------------------
+ |L1| 50000 |800000 |
+ |L2| 100000 |800000 |
+ |L3| 134000 |800000 |
+ |L4| 200000 |825000 |
+ |L5| 400000 |875000 |
+ -----------------------
+
+ - INT bus's frequency/voltage table
+ ----------------------------------------------------------
+ |Block|LEFTBUS|RIGHTBUS|MCUISP |ISP |PERIL ||VDD_INT |
+ | name| |LCD0 | | | || |
+ | | |FSYS | | | || |
+ | | |MFC | | | || |
+ ----------------------------------------------------------
+ |Mode |*parent|passive |passive|passive|passive|| |
+ ----------------------------------------------------------
+ |Lv |Frequency ||Voltage |
+ ----------------------------------------------------------
+ |L1 |50000 |50000 |50000 |50000 |50000 ||900000 |
+ |L2 |80000 |80000 |80000 |80000 |80000 ||900000 |
+ |L3 |100000 |100000 |100000 |100000 |100000 ||1000000 |
+ |L4 |134000 |134000 |200000 |200000 | ||1000000 |
+ |L5 |200000 |200000 |400000 |300000 | ||1000000 |
+ ----------------------------------------------------------
+
+Example2 :
+ The bus of DMC (Dynamic Memory Controller) block in exynos3250.dtsi
+ is listed below:
+
+ bus_dmc: bus_dmc {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu_dmc CLK_DIV_DMC>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_dmc_opp_table>;
+ status = "disabled";
+ };
+
+ bus_dmc_opp_table: opp_table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp@50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ opp-microvolt = <800000>;
+ };
+ opp@100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ opp-microvolt = <800000>;
+ };
+ opp@134000000 {
+ opp-hz = /bits/ 64 <134000000>;
+ opp-microvolt = <800000>;
+ };
+ opp@200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <825000>;
+ };
+ opp@400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <875000>;
+ };
+ };
+
+ bus_leftbus: bus_leftbus {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu CLK_DIV_GDL>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_leftbus_opp_table>;
+ status = "disabled";
+ };
+
+ bus_rightbus: bus_rightbus {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu CLK_DIV_GDR>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_leftbus_opp_table>;
+ status = "disabled";
+ };
+
+ bus_lcd0: bus_lcd0 {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu CLK_DIV_ACLK_160>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_leftbus_opp_table>;
+ status = "disabled";
+ };
+
+ bus_fsys: bus_fsys {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu CLK_DIV_ACLK_200>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_leftbus_opp_table>;
+ status = "disabled";
+ };
+
+ bus_mcuisp: bus_mcuisp {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_mcuisp_opp_table>;
+ status = "disabled";
+ };
+
+ bus_isp: bus_isp {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu CLK_DIV_ACLK_266>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_isp_opp_table>;
+ status = "disabled";
+ };
+
+ bus_peril: bus_peril {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu CLK_DIV_ACLK_100>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_peril_opp_table>;
+ status = "disabled";
+ };
+
+ bus_mfc: bus_mfc {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu CLK_SCLK_MFC>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_leftbus_opp_table>;
+ status = "disabled";
+ };
+
+ bus_leftbus_opp_table: opp_table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp@50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ opp-microvolt = <900000>;
+ };
+ opp@80000000 {
+ opp-hz = /bits/ 64 <80000000>;
+ opp-microvolt = <900000>;
+ };
+ opp@100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ opp-microvolt = <1000000>;
+ };
+ opp@134000000 {
+ opp-hz = /bits/ 64 <134000000>;
+ opp-microvolt = <1000000>;
+ };
+ opp@200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <1000000>;
+ };
+ };
+
+ bus_mcuisp_opp_table: opp_table2 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp@50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ };
+ opp@80000000 {
+ opp-hz = /bits/ 64 <80000000>;
+ };
+ opp@100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+ opp@200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+ opp@400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ };
+ };
+
+ bus_isp_opp_table: opp_table3 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp@50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ };
+ opp@80000000 {
+ opp-hz = /bits/ 64 <80000000>;
+ };
+ opp@100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+ opp@200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+ opp@300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ };
+ };
+
+ bus_peril_opp_table: opp_table4 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp@50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ };
+ opp@80000000 {
+ opp-hz = /bits/ 64 <80000000>;
+ };
+ opp@100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+ };
+
+
+ Usage case to handle the frequency and voltage of bus on runtime
+ in exynos3250-rinato.dts is listed below:
+
+ &bus_dmc {
+ devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+ vdd-supply = <&buck1_reg>; /* VDD_MIF */
+ status = "okay";
+ };
+
+ &bus_leftbus {
+ devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+ vdd-supply = <&buck3_reg>;
+ status = "okay";
+ };
+
+ &bus_rightbus {
+ devfreq = <&bus_leftbus>;
+ status = "okay";
+ };
+
+ &bus_lcd0 {
+ devfreq = <&bus_leftbus>;
+ status = "okay";
+ };
+
+ &bus_fsys {
+ devfreq = <&bus_leftbus>;
+ status = "okay";
+ };
+
+ &bus_mcuisp {
+ devfreq = <&bus_leftbus>;
+ status = "okay";
+ };
+
+ &bus_isp {
+ devfreq = <&bus_leftbus>;
+ status = "okay";
+ };
+
+ &bus_peril {
+ devfreq = <&bus_leftbus>;
+ status = "okay";
+ };
+
+ &bus_mfc {
+ devfreq = <&bus_leftbus>;
+ status = "okay";
+ };
Required properties :
- reg : Offset and length of the register set for the device
- - compatible : should be "rockchip,rk3066-i2c", "rockchip,rk3188-i2c" or
- "rockchip,rk3288-i2c".
+ - compatible : should be "rockchip,rk3066-i2c", "rockchip,rk3188-i2c",
+ "rockchip,rk3228-i2c" or "rockchip,rk3288-i2c".
- interrupts : interrupt number
- clocks : parent clock
Optional properties:
- dual_emac_res_vlan : Specifies VID to be used to segregate the ports
- mac-address : See ethernet.txt file in the same directory
-- phy_id : Specifies slave phy id
+- phy_id : Specifies slave phy id (deprecated, use phy-handle)
- phy-handle : See ethernet.txt file in the same directory
Slave sub-nodes:
- fixed-link : See fixed-link.txt file in the same directory
- Either the property phy_id, or the sub-node
- fixed-link can be specified
+
+Note: Exactly one of phy_id, phy-handle, or fixed-link must be specified.
Note: "ti,hwmods" field is used to fetch the base address and irq
resources from TI, omap hwmod data base during device registration.
hwp_only
Only load intel_pstate on systems which support
hardware P state control (HWP) if available.
+ support_acpi_ppc
+ Enforce ACPI _PPC performance limits. If the Fixed ACPI
+ Description Table, specifies preferred power management
+ profile as "Enterprise Server" or "Performance Server",
+ then this feature is turned on by default.
intremap= [X86-64, Intel-IOMMU]
on enable Interrupt Remapping (default)
using the SGDMA and MSGDMA soft DMA IP components. The driver uses the
platform bus to obtain component resources. The designs used to test this
driver were built for a Cyclone(R) V SOC FPGA board, a Cyclone(R) V FPGA board,
-and tested with ARM and NIOS processor hosts seperately. The anticipated use
+and tested with ARM and NIOS processor hosts separately. The anticipated use
cases are simple communications between an embedded system and an external peer
for status and simple configuration of the embedded system.
4.1) Transmit process
When the driver's transmit routine is called by the kernel, it sets up a
transmit descriptor by calling the underlying DMA transmit routine (SGDMA or
-MSGDMA), and initites a transmit operation. Once the transmit is complete, an
+MSGDMA), and initiates a transmit operation. Once the transmit is complete, an
interrupt is driven by the transmit DMA logic. The driver handles the transmit
completion in the context of the interrupt handling chain by recycling
resource required to send and track the requested transmit operation.
4.2) Receive process
The driver will post receive buffers to the receive DMA logic during driver
-intialization. Receive buffers may or may not be queued depending upon the
+initialization. Receive buffers may or may not be queued depending upon the
underlying DMA logic (MSGDMA is able queue receive buffers, SGDMA is not able
to queue receive buffers to the SGDMA receive logic). When a packet is
received, the DMA logic generates an interrupt. The driver handles a receive
This is conceptually very similar to the macvlan driver with one major
exception of using L3 for mux-ing /demux-ing among slaves. This property makes
the master device share the L2 with it's slave devices. I have developed this
-driver in conjuntion with network namespaces and not sure if there is use case
+driver in conjunction with network namespaces and not sure if there is use case
outside of it.
as well.
4.2 L3 mode:
- In this mode TX processing upto L3 happens on the stack instance attached
+ In this mode TX processing up to L3 happens on the stack instance attached
to the slave device and packets are switched to the stack instance of the
master device for the L2 processing and routing from that instance will be
used before packets are queued on the outbound device. In this mode the slaves
(a) The Linux host that is connected to the external switch / router has
policy configured that allows only one mac per port.
(b) No of virtual devices created on a master exceed the mac capacity and
-puts the NIC in promiscous mode and degraded performance is a concern.
+puts the NIC in promiscuous mode and degraded performance is a concern.
(c) If the slave device is to be put into the hostile / untrusted network
namespace where L2 on the slave could be changed / misused.
* add_device DEVICE@NAME -- adds a single device
* rem_device_all -- remove all associated devices
-When adding a device to a thread, a corrosponding procfile is created
+When adding a device to a thread, a corresponding procfile is created
which is used for configuring this device. Thus, device names need to
be unique.
To support adding the same device to multiple threads, which is useful
-with multi queue NICs, a the device naming scheme is extended with "@":
+with multi queue NICs, the device naming scheme is extended with "@":
device@something
The part after "@" can be anything, but it is custom to use the thread
A collection of tutorial scripts and helpers for pktgen is in the
samples/pktgen directory. The helper parameters.sh file support easy
-and consistant parameter parsing across the sample scripts.
+and consistent parameter parsing across the sample scripts.
Usage example and help:
./pktgen_sample01_simple.sh -i eth4 -m 00:1B:21:3C:9D:F8 -d 192.168.8.2
the VRF device. Similarly on egress routing rules are used to send packets
to the VRF device driver before getting sent out the actual interface. This
allows tcpdump on a VRF device to capture all packets into and out of the
-VRF as a whole.[1] Similiarly, netfilter [2] and tc rules can be applied
+VRF as a whole.[1] Similarly, netfilter [2] and tc rules can be applied
using the VRF device to specify rules that apply to the VRF domain as a whole.
[1] Packets in the forwarded state do not flow through the device, so those
from Jamal <hadi@cyberus.ca>.
The end goal for syncing is to be able to insert attributes + generate
-events so that the an SA can be safely moved from one machine to another
+events so that the SA can be safely moved from one machine to another
for HA purposes.
The idea is to synchronize the SA so that the takeover machine can do
the processing of the SA as accurate as possible if it has access to it.
These patches add ability to sync and have accurate lifetime byte (to
ensure proper decay of SAs) and replay counters to avoid replay attacks
with as minimal loss at failover time.
-This way a backup stays as closely uptodate as an active member.
+This way a backup stays as closely up-to-date as an active member.
Because the above items change for every packet the SA receives,
it is possible for a lot of the events to be generated.
there is a period where the timer threshold expires with no packets
seen, then an odd behavior is seen as follows:
The first packet arrival after a timer expiry will trigger a timeout
-aevent; i.e we dont wait for a timeout period or a packet threshold
+event; i.e we don't wait for a timeout period or a packet threshold
to be reached. This is done for simplicity and efficiency reasons.
-JHS
"Zone Order" orders the zonelists by zone type, then by node within each
zone. Specify "[Zz]one" for zone order.
-Specify "[Dd]efault" to request automatic configuration. Autoconfiguration
-will select "node" order in following case.
-(1) if the DMA zone does not exist or
-(2) if the DMA zone comprises greater than 50% of the available memory or
-(3) if any node's DMA zone comprises greater than 70% of its local memory and
- the amount of local memory is big enough.
-
-Otherwise, "zone" order will be selected. Default order is recommended unless
-this is causing problems for your system/application.
+Specify "[Dd]efault" to request automatic configuration.
+
+On 32-bit, the Normal zone needs to be preserved for allocations accessible
+by the kernel, so "zone" order will be selected.
+
+On 64-bit, devices that require DMA32/DMA are relatively rare, so "node"
+order will be selected.
+
+Default order is recommended unless this is causing problems for your
+system/application.
==============================================================
F: include/linux/perf/arm_pmu.h
ARM PORT
-M: Russell King <linux@arm.linux.org.uk>
+M: Russell King <linux@armlinux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W: http://www.arm.linux.org.uk/
+W: http://www.armlinux.org.uk/
S: Maintained
F: arch/arm/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
ARM PRIMECELL AACI PL041 DRIVER
-M: Russell King <linux@arm.linux.org.uk>
+M: Russell King <linux@armlinux.org.uk>
S: Maintained
F: sound/arm/aaci.*
ARM PRIMECELL CLCD PL110 DRIVER
-M: Russell King <linux@arm.linux.org.uk>
+M: Russell King <linux@armlinux.org.uk>
S: Maintained
F: drivers/video/fbdev/amba-clcd.*
ARM PRIMECELL KMI PL050 DRIVER
-M: Russell King <linux@arm.linux.org.uk>
+M: Russell King <linux@armlinux.org.uk>
S: Maintained
F: drivers/input/serio/ambakmi.*
F: include/linux/amba/kmi.h
ARM PRIMECELL MMCI PL180/1 DRIVER
-M: Russell King <linux@arm.linux.org.uk>
+M: Russell King <linux@armlinux.org.uk>
S: Maintained
F: drivers/mmc/host/mmci.*
F: include/linux/amba/mmci.h
ARM PRIMECELL UART PL010 AND PL011 DRIVERS
-M: Russell King <linux@arm.linux.org.uk>
+M: Russell King <linux@armlinux.org.uk>
S: Maintained
F: drivers/tty/serial/amba-pl01*.c
F: include/linux/amba/serial.h
ARM PRIMECELL BUS SUPPORT
-M: Russell King <linux@arm.linux.org.uk>
+M: Russell King <linux@armlinux.org.uk>
S: Maintained
F: drivers/amba/
F: include/linux/amba/bus.h
S: Maintained
ARM/CLKDEV SUPPORT
-M: Russell King <linux@arm.linux.org.uk>
+M: Russell King <linux@armlinux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/include/asm/clkdev.h
N: digicolor
ARM/EBSA110 MACHINE SUPPORT
-M: Russell King <linux@arm.linux.org.uk>
+M: Russell King <linux@armlinux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W: http://www.arm.linux.org.uk/
+W: http://www.armlinux.org.uk/
S: Maintained
F: arch/arm/mach-ebsa110/
F: drivers/net/ethernet/amd/am79c961a.*
F: arch/arm/mm/*-fa*
ARM/FOOTBRIDGE ARCHITECTURE
-M: Russell King <linux@arm.linux.org.uk>
+M: Russell King <linux@armlinux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W: http://www.arm.linux.org.uk/
+W: http://www.armlinux.org.uk/
S: Maintained
F: arch/arm/include/asm/hardware/dec21285.h
F: arch/arm/mach-footbridge/
F: arch/arm/boot/dts/armada*
F: arch/arm/boot/dts/kirkwood*
F: arch/arm64/boot/dts/marvell/armada*
+F: drivers/cpufreq/mvebu-cpufreq.c
ARM/Marvell Berlin SoC support
ARM/PT DIGITAL BOARD PORT
M: Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W: http://www.arm.linux.org.uk/
+W: http://www.armlinux.org.uk/
S: Maintained
ARM/QUALCOMM SUPPORT
F: arch/arm64/boot/dts/renesas/
ARM/RISCPC ARCHITECTURE
-M: Russell King <linux@arm.linux.org.uk>
+M: Russell King <linux@armlinux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W: http://www.arm.linux.org.uk/
+W: http://www.armlinux.org.uk/
S: Maintained
F: arch/arm/include/asm/hardware/entry-macro-iomd.S
F: arch/arm/include/asm/hardware/ioc.h
F: drivers/clocksource/versatile.c
ARM/VFP SUPPORT
-M: Russell King <linux@arm.linux.org.uk>
+M: Russell King <linux@armlinux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W: http://www.arm.linux.org.uk/
+W: http://www.armlinux.org.uk/
S: Maintained
F: arch/arm/vfp/
F: include/linux/cleancache.h
CLK API
-M: Russell King <linux@arm.linux.org.uk>
+M: Russell King <linux@armlinux.org.uk>
L: linux-clk@vger.kernel.org
S: Maintained
F: include/linux/clk.h
F: drivers/net/ethernet/stmicro/stmmac/
CYBERPRO FB DRIVER
-M: Russell King <linux@arm.linux.org.uk>
+M: Russell King <linux@armlinux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W: http://www.arm.linux.org.uk/
+W: http://www.armlinux.org.uk/
S: Maintained
F: drivers/video/fbdev/cyber2000fb.*
F: include/linux/devfreq-event.h
F: Documentation/devicetree/bindings/devfreq/event/
+BUS FREQUENCY DRIVER FOR SAMSUNG EXYNOS
+M: Chanwoo Choi <cw00.choi@samsung.com>
+L: linux-pm@vger.kernel.org
+L: linux-samsung-soc@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq.git
+S: Maintained
+F: drivers/devfreq/exynos-bus.c
+F: Documentation/devicetree/bindings/devfreq/exynos-bus.txt
+
DEVICE NUMBER REGISTRY
M: Torben Mathiasen <device@lanana.org>
W: http://lanana.org/docs/device-list/index.html
DRM DRIVERS FOR VIVANTE GPU IP
M: Lucas Stach <l.stach@pengutronix.de>
-R: Russell King <linux+etnaviv@arm.linux.org.uk>
+R: Russell King <linux+etnaviv@armlinux.org.uk>
R: Christian Gmeiner <christian.gmeiner@gmail.com>
L: dri-devel@lists.freedesktop.org
S: Maintained
F: arch/ia64/kernel/efi.c
F: arch/x86/boot/compressed/eboot.[ch]
F: arch/x86/include/asm/efi.h
-F: arch/x86/platform/efi/*
-F: drivers/firmware/efi/*
+F: arch/x86/platform/efi/
+F: drivers/firmware/efi/
F: include/linux/efi*.h
EFI VARIABLE FILESYSTEM
FUSE: FILESYSTEM IN USERSPACE
M: Miklos Szeredi <miklos@szeredi.hu>
-L: fuse-devel@lists.sourceforge.net
+L: linux-fsdevel@vger.kernel.org
W: http://fuse.sourceforge.net/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse.git
S: Maintained
F: include/net/gre.h
GRETH 10/100/1G Ethernet MAC device driver
-M: Kristoffer Glembo <kristoffer@gaisler.com>
+M: Andreas Larsson <andreas@gaisler.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/aeroflex/
ISCSI EXTENSIONS FOR RDMA (ISER) INITIATOR
M: Or Gerlitz <ogerlitz@mellanox.com>
-M: Sagi Grimberg <sagig@mellanox.com>
+M: Sagi Grimberg <sagi@grimberg.me>
M: Roi Dayan <roid@mellanox.com>
L: linux-rdma@vger.kernel.org
S: Supported
F: drivers/infiniband/ulp/iser/
ISCSI EXTENSIONS FOR RDMA (ISER) TARGET
-M: Sagi Grimberg <sagig@mellanox.com>
+M: Sagi Grimberg <sagi@grimberg.me>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git master
L: linux-rdma@vger.kernel.org
L: target-devel@vger.kernel.org
F: mm/kmemleak-test.c
KPROBES
-M: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
+M: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
M: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
M: "David S. Miller" <davem@davemloft.net>
M: Masami Hiramatsu <mhiramat@kernel.org>
S: Maintained
MARVELL ARMADA DRM SUPPORT
-M: Russell King <rmk+kernel@arm.linux.org.uk>
+M: Russell King <rmk+kernel@armlinux.org.uk>
S: Maintained
F: drivers/gpu/drm/armada/
F: drivers/nfc/nxp-nci
NXP TDA998X DRM DRIVER
-M: Russell King <rmk+kernel@arm.linux.org.uk>
+M: Russell King <rmk+kernel@armlinux.org.uk>
S: Supported
F: drivers/gpu/drm/i2c/tda998x_drv.c
F: include/drm/i2c/tda998x.h
F: drivers/cpufreq/omap-cpufreq.c
OMAP POWERDOMAIN SOC ADAPTATION LAYER SUPPORT
-M: Rajendra Nayak <rnayak@ti.com>
+M: Rajendra Nayak <rnayak@codeaurora.org>
M: Paul Walmsley <paul@pwsan.com>
L: linux-omap@vger.kernel.org
S: Maintained
SFC NETWORK DRIVER
M: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
-M: Shradha Shah <sshah@solarflare.com>
+M: Edward Cree <ecree@solarflare.com>
+M: Bert Kenward <bkenward@solarflare.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/sfc/
F: drivers/clk/ti/
F: include/linux/clk/ti.h
+TI ETHERNET SWITCH DRIVER (CPSW)
+M: Mugunthan V N <mugunthanvnm@ti.com>
+R: Grygorii Strashko <grygorii.strashko@ti.com>
+L: linux-omap@vger.kernel.org
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/net/ethernet/ti/cpsw*
+F: drivers/net/ethernet/ti/davinci*
+
TI FLASH MEDIA INTERFACE DRIVER
M: Alex Dubov <oakad@yahoo.com>
S: Maintained
VERSION = 4
PATCHLEVEL = 6
SUBLEVEL = 0
-EXTRAVERSION = -rc5
-NAME = Blurry Fish Butt
+EXTRAVERSION = -rc7
+NAME = Charred Weasel
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
select NO_BOOTMEM
select OF
select OF_EARLY_FLATTREE
+ select OF_RESERVED_MEM
select PERF_USE_VMALLOC
select HAVE_DEBUG_STACKOVERFLOW
+ select HAVE_GENERIC_DMA_COHERENT
config MIGHT_HAVE_PCI
bool
config RWSEM_GENERIC_SPINLOCK
def_bool y
+config ARCH_DISCONTIGMEM_ENABLE
+ def_bool y
+
config ARCH_FLATMEM_ENABLE
def_bool y
endchoice
+config NODES_SHIFT
+ int "Maximum NUMA Nodes (as a power of 2)"
+ default "1" if !DISCONTIGMEM
+ default "2" if DISCONTIGMEM
+ depends on NEED_MULTIPLE_NODES
+ ---help---
+ Accessing memory beyond 1GB (with or w/o PAE) requires 2 memory
+ zones.
+
if ISA_ARCOMPACT
config ARC_COMPACT_IRQ_LEVELS
config HIGHMEM
bool "High Memory Support"
+ select DISCONTIGMEM
help
With ARC 2G:2G address split, only upper 2G is directly addressable by
kernel. Enable this to potentially allow access to rest of 2G and PAE
#include <asm/byteorder.h>
#include <asm/page.h>
+#ifdef CONFIG_ISA_ARCV2
+#include <asm/barrier.h>
+#define __iormb() rmb()
+#define __iowmb() wmb()
+#else
+#define __iormb() do { } while (0)
+#define __iowmb() do { } while (0)
+#endif
+
extern void __iomem *ioremap(phys_addr_t paddr, unsigned long size);
extern void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
unsigned long flags);
#define ioremap_wc(phy, sz) ioremap(phy, sz)
#define ioremap_wt(phy, sz) ioremap(phy, sz)
+/*
+ * io{read,write}{16,32}be() macros
+ */
+#define ioread16be(p) ({ u16 __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(); __v; })
+#define ioread32be(p) ({ u32 __v = be32_to_cpu((__force __be32)__raw_readl(p)); __iormb(); __v; })
+
+#define iowrite16be(v,p) ({ __iowmb(); __raw_writew((__force u16)cpu_to_be16(v), p); })
+#define iowrite32be(v,p) ({ __iowmb(); __raw_writel((__force u32)cpu_to_be32(v), p); })
+
/* Change struct page to physical address */
#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT)
}
-#ifdef CONFIG_ISA_ARCV2
-#include <asm/barrier.h>
-#define __iormb() rmb()
-#define __iowmb() wmb()
-#else
-#define __iormb() do { } while (0)
-#define __iowmb() do { } while (0)
-#endif
-
/*
* MMIO can also get buffered/optimized in micro-arch, so barriers needed
* Based on ARM model for the typical use case
#define STATUS_AD_MASK (1<<STATUS_AD_BIT)
#define STATUS_IE_MASK (1<<STATUS_IE_BIT)
+/* status32 Bits as encoded/expected by CLRI/SETI */
+#define CLRI_STATUS_IE_BIT 4
+
+#define CLRI_STATUS_E_MASK 0xF
+#define CLRI_STATUS_IE_MASK (1 << CLRI_STATUS_IE_BIT)
+
#define AUX_USER_SP 0x00D
#define AUX_IRQ_CTRL 0x00E
#define AUX_IRQ_ACT 0x043 /* Active Intr across all levels */
:
: "memory");
+ /* To be compatible with irq_save()/irq_restore()
+ * encode the irq bits as expected by CLRI/SETI
+ * (this was needed to make CONFIG_TRACE_IRQFLAGS work)
+ */
+ temp = (1 << 5) |
+ ((!!(temp & STATUS_IE_MASK)) << CLRI_STATUS_IE_BIT) |
+ (temp & CLRI_STATUS_E_MASK);
return temp;
}
*/
static inline int arch_irqs_disabled_flags(unsigned long flags)
{
- return !(flags & (STATUS_IE_MASK));
+ return !(flags & CLRI_STATUS_IE_MASK);
}
static inline int arch_irqs_disabled(void)
#else
+#ifdef CONFIG_TRACE_IRQFLAGS
+
+.macro TRACE_ASM_IRQ_DISABLE
+ bl trace_hardirqs_off
+.endm
+
+.macro TRACE_ASM_IRQ_ENABLE
+ bl trace_hardirqs_on
+.endm
+
+#else
+
+.macro TRACE_ASM_IRQ_DISABLE
+.endm
+
+.macro TRACE_ASM_IRQ_ENABLE
+.endm
+
+#endif
.macro IRQ_DISABLE scratch
clri
+ TRACE_ASM_IRQ_DISABLE
.endm
.macro IRQ_ENABLE scratch
+ TRACE_ASM_IRQ_ENABLE
seti
.endm
--- /dev/null
+/*
+ * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_MMZONE_H
+#define _ASM_ARC_MMZONE_H
+
+#ifdef CONFIG_DISCONTIGMEM
+
+extern struct pglist_data node_data[];
+#define NODE_DATA(nid) (&node_data[nid])
+
+static inline int pfn_to_nid(unsigned long pfn)
+{
+ int is_end_low = 1;
+
+ if (IS_ENABLED(CONFIG_ARC_HAS_PAE40))
+ is_end_low = pfn <= virt_to_pfn(0xFFFFFFFFUL);
+
+ /*
+ * node 0: lowmem: 0x8000_0000 to 0xFFFF_FFFF
+ * node 1: HIGHMEM w/o PAE40: 0x0 to 0x7FFF_FFFF
+ * HIGHMEM with PAE40: 0x1_0000_0000 to ...
+ */
+ if (pfn >= ARCH_PFN_OFFSET && is_end_low)
+ return 0;
+
+ return 1;
+}
+
+static inline int pfn_valid(unsigned long pfn)
+{
+ int nid = pfn_to_nid(pfn);
+
+ return (pfn <= node_end_pfn(nid));
+}
+#endif /* CONFIG_DISCONTIGMEM */
+
+#endif
typedef pte_t * pgtable_t;
+/*
+ * Use virt_to_pfn with caution:
+ * If used in pte or paddr related macros, it could cause truncation
+ * in PAE40 builds
+ * As a rule of thumb, only use it in helpers starting with virt_
+ * You have been warned !
+ */
#define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT)
#define ARCH_PFN_OFFSET virt_to_pfn(CONFIG_LINUX_LINK_BASE)
+#ifdef CONFIG_FLATMEM
#define pfn_valid(pfn) (((pfn) - ARCH_PFN_OFFSET) < max_mapnr)
+#endif
/*
* __pa, __va, virt_to_page (ALERT: deprecated, don't use them)
* virt here means link-address/program-address as embedded in object code.
* And for ARC, link-addr = physical address
*/
-#define __pa(vaddr) ((unsigned long)vaddr)
+#define __pa(vaddr) ((unsigned long)(vaddr))
#define __va(paddr) ((void *)((unsigned long)(paddr)))
-#define virt_to_page(kaddr) \
- (mem_map + virt_to_pfn((kaddr) - CONFIG_LINUX_LINK_BASE))
-
+#define virt_to_page(kaddr) pfn_to_page(virt_to_pfn(kaddr))
#define virt_addr_valid(kaddr) pfn_valid(virt_to_pfn(kaddr))
/* Default Permissions for stack/heaps pages (Non Executable) */
#define pmd_present(x) (pmd_val(x))
#define pmd_clear(xp) do { pmd_val(*(xp)) = 0; } while (0)
-#define pte_page(pte) \
- (mem_map + virt_to_pfn(pte_val(pte) - CONFIG_LINUX_LINK_BASE))
-
+#define pte_page(pte) pfn_to_page(pte_pfn(pte))
#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot)
-#define pte_pfn(pte) virt_to_pfn(pte_val(pte))
-#define pfn_pte(pfn, prot) (__pte(((pte_t)(pfn) << PAGE_SHIFT) | \
- pgprot_val(prot)))
-#define __pte_index(addr) (virt_to_pfn(addr) & (PTRS_PER_PTE - 1))
+#define pfn_pte(pfn, prot) (__pte(((pte_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot)))
+
+/* Don't use virt_to_pfn for macros below: could cause truncations for PAE40*/
+#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT)
+#define __pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
/*
* pte_offset gets a @ptr to PMD entry (PGD in our 2-tier paging system)
clri ; To make status32.IE agree with CPU internal state
- lr r0, [ICAUSE]
+#ifdef CONFIG_TRACE_IRQFLAGS
+ TRACE_ASM_IRQ_DISABLE
+#endif
+ lr r0, [ICAUSE]
mov blink, ret_from_exception
b.d arch_do_IRQ
.Lrestore_regs:
+ # Interrpts are actually disabled from this point on, but will get
+ # reenabled after we return from interrupt/exception.
+ # But irq tracer needs to be told now...
+ TRACE_ASM_IRQ_ENABLE
+
ld r0, [sp, PT_status32] ; U/K mode at time of entry
lr r10, [AUX_IRQ_ACT]
.Lrestore_regs:
+ # Interrpts are actually disabled from this point on, but will get
+ # reenabled after we return from interrupt/exception.
+ # But irq tracer needs to be told now...
TRACE_ASM_IRQ_ENABLE
lr r10, [status32]
#ifdef CONFIG_BLK_DEV_INITRD
#include <linux/initrd.h>
#endif
+#include <linux/of_fdt.h>
#include <linux/swap.h>
#include <linux/module.h>
#include <linux/highmem.h>
static unsigned long low_mem_sz;
#ifdef CONFIG_HIGHMEM
-static unsigned long min_high_pfn;
+static unsigned long min_high_pfn, max_high_pfn;
static u64 high_mem_start;
static u64 high_mem_sz;
#endif
+#ifdef CONFIG_DISCONTIGMEM
+struct pglist_data node_data[MAX_NUMNODES] __read_mostly;
+EXPORT_SYMBOL(node_data);
+#endif
+
/* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
static int __init setup_mem_sz(char *str)
{
/* Last usable page of low mem */
max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
-#ifdef CONFIG_HIGHMEM
- min_high_pfn = PFN_DOWN(high_mem_start);
- max_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
+#ifdef CONFIG_FLATMEM
+ /* pfn_valid() uses this */
+ max_mapnr = max_low_pfn - min_low_pfn;
#endif
- max_mapnr = max_pfn - min_low_pfn;
-
/*------------- bootmem allocator setup -----------------------*/
/*
* the crash
*/
- memblock_add(low_mem_start, low_mem_sz);
+ memblock_add_node(low_mem_start, low_mem_sz, 0);
memblock_reserve(low_mem_start, __pa(_end) - low_mem_start);
#ifdef CONFIG_BLK_DEV_INITRD
memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
#endif
+ early_init_fdt_reserve_self();
+ early_init_fdt_scan_reserved_mem();
+
memblock_dump_all();
/*----------------- node/zones setup --------------------------*/
zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
zones_holes[ZONE_NORMAL] = 0;
-#ifdef CONFIG_HIGHMEM
- zones_size[ZONE_HIGHMEM] = max_pfn - max_low_pfn;
-
- /* This handles the peripheral address space hole */
- zones_holes[ZONE_HIGHMEM] = min_high_pfn - max_low_pfn;
-#endif
-
/*
* We can't use the helper free_area_init(zones[]) because it uses
* PAGE_OFFSET to compute the @min_low_pfn which would be wrong
zones_holes); /* holes */
#ifdef CONFIG_HIGHMEM
+ /*
+ * Populate a new node with highmem
+ *
+ * On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based)
+ * than addresses in normal ala low memory (0x8000_0000 based).
+ * Even with PAE, the huge peripheral space hole would waste a lot of
+ * mem with single mem_map[]. This warrants a mem_map per region design.
+ * Thus HIGHMEM on ARC is imlemented with DISCONTIGMEM.
+ *
+ * DISCONTIGMEM in turns requires multiple nodes. node 0 above is
+ * populated with normal memory zone while node 1 only has highmem
+ */
+ node_set_online(1);
+
+ min_high_pfn = PFN_DOWN(high_mem_start);
+ max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
+
+ zones_size[ZONE_NORMAL] = 0;
+ zones_holes[ZONE_NORMAL] = 0;
+
+ zones_size[ZONE_HIGHMEM] = max_high_pfn - min_high_pfn;
+ zones_holes[ZONE_HIGHMEM] = 0;
+
+ free_area_init_node(1, /* node-id */
+ zones_size, /* num pages per zone */
+ min_high_pfn, /* first pfn of node */
+ zones_holes); /* holes */
+
high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
kmap_init();
#endif
unsigned long tmp;
reset_all_zones_managed_pages();
- for (tmp = min_high_pfn; tmp < max_pfn; tmp++)
+ for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
free_highmem_page(pfn_to_page(tmp));
#endif
ti,no-idle-on-init;
reg = <0x50000000 0x2000>;
interrupts = <100>;
- dmas = <&edma 52>;
+ dmas = <&edma 52 0>;
dma-names = "rxtx";
gpmc,num-cs = <7>;
gpmc,num-waitpins = <2>;
gpmc: gpmc@50000000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
- dmas = <&edma 52>;
+ dmas = <&edma 52 0>;
dma-names = "rxtx";
clocks = <&l3s_gclk>;
clock-names = "fck";
#cooling-cells = <2>;
};
- extcon_usb1: extcon_usb1 {
- compatible = "linux,extcon-usb-gpio";
- id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&extcon_usb1_pins>;
- };
-
hdmi0: connector {
compatible = "hdmi-connector";
label = "hdmi";
>;
};
- extcon_usb1_pins: extcon_usb1_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
- >;
- };
-
tpd12s015_pins: pinmux_tpd12s015_pins {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */
pinctrl-0 = <&usb1_pins>;
};
-&omap_dwc3_1 {
- extcon = <&extcon_usb1>;
-};
-
&omap_dwc3_2 {
extcon = <&extcon_usb2>;
};
* published by the Free Software Foundation.
*/
+&pllss {
+ /*
+ * See TRM "2.6.10 Connected outputso DPLLS" and
+ * "2.6.11 Connected Outputs of DPLLJ". Only clkout is
+ * connected except for hdmi and usb.
+ */
+ adpll_mpu_ck: adpll@40 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-s-clock";
+ reg = <0x40 0x40>;
+ clocks = <&devosc_ck &devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow", "clkinphif";
+ clock-output-names = "481c5040.adpll.dcoclkldo",
+ "481c5040.adpll.clkout",
+ "481c5040.adpll.clkoutx2",
+ "481c5040.adpll.clkouthif";
+ };
+
+ adpll_dsp_ck: adpll@80 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0x80 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c5080.adpll.dcoclkldo",
+ "481c5080.adpll.clkout",
+ "481c5080.adpll.clkoutldo";
+ };
+
+ adpll_sgx_ck: adpll@b0 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0xb0 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c50b0.adpll.dcoclkldo",
+ "481c50b0.adpll.clkout",
+ "481c50b0.adpll.clkoutldo";
+ };
+
+ adpll_hdvic_ck: adpll@e0 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0xe0 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c50e0.adpll.dcoclkldo",
+ "481c50e0.adpll.clkout",
+ "481c50e0.adpll.clkoutldo";
+ };
+
+ adpll_l3_ck: adpll@110 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0x110 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c5110.adpll.dcoclkldo",
+ "481c5110.adpll.clkout",
+ "481c5110.adpll.clkoutldo";
+ };
+
+ adpll_isp_ck: adpll@140 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0x140 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c5140.adpll.dcoclkldo",
+ "481c5140.adpll.clkout",
+ "481c5140.adpll.clkoutldo";
+ };
+
+ adpll_dss_ck: adpll@170 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0x170 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c5170.adpll.dcoclkldo",
+ "481c5170.adpll.clkout",
+ "481c5170.adpll.clkoutldo";
+ };
+
+ adpll_video0_ck: adpll@1a0 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0x1a0 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c51a0.adpll.dcoclkldo",
+ "481c51a0.adpll.clkout",
+ "481c51a0.adpll.clkoutldo";
+ };
+
+ adpll_video1_ck: adpll@1d0 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0x1d0 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c51d0.adpll.dcoclkldo",
+ "481c51d0.adpll.clkout",
+ "481c51d0.adpll.clkoutldo";
+ };
+
+ adpll_hdmi_ck: adpll@200 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0x200 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c5200.adpll.dcoclkldo",
+ "481c5200.adpll.clkout",
+ "481c5200.adpll.clkoutldo";
+ };
+
+ adpll_audio_ck: adpll@230 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0x230 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c5230.adpll.dcoclkldo",
+ "481c5230.adpll.clkout",
+ "481c5230.adpll.clkoutldo";
+ };
+
+ adpll_usb_ck: adpll@260 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0x260 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c5260.adpll.dcoclkldo",
+ "481c5260.adpll.clkout",
+ "481c5260.adpll.clkoutldo";
+ };
+
+ adpll_ddr_ck: adpll@290 {
+ #clock-cells = <1>;
+ compatible = "ti,dm814-adpll-lj-clock";
+ reg = <0x290 0x30>;
+ clocks = <&devosc_ck &devosc_ck>;
+ clock-names = "clkinp", "clkinpulow";
+ clock-output-names = "481c5290.adpll.dcoclkldo",
+ "481c5290.adpll.clkout",
+ "481c5290.adpll.clkoutldo";
+ };
+};
+
&pllss_clocks {
timer1_fck: timer1_fck {
#clock-cells = <0>;
reg = <0x2e0>;
};
+ /* CPTS_RFT_CLK in RMII_REFCLK_SRC, usually sourced from auiod */
+ cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&adpll_video0_ck 1
+ &adpll_video1_ck 1
+ &adpll_audio_ck 1>;
+ ti,bit-shift = <1>;
+ reg = <0x2e8>;
+ };
+
+ /* REVISIT: Set up with a proper mux using RMII_REFCLK_SRC */
+ cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ };
+
sysclk18_ck: sysclk18_ck {
#clock-cells = <0>;
compatible = "ti,mux-clock";
compatible = "fixed-clock";
clock-frequency = <1000000000>;
};
-
- sysclk4_ck: sysclk4_ck {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <222000000>;
- };
-
- sysclk6_ck: sysclk6_ck {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <100000000>;
- };
-
- sysclk10_ck: sysclk10_ck {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <48000000>;
- };
-
- cpsw_125mhz_gclk: cpsw_125mhz_gclk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- };
-
- cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <250000000>;
- };
-
};
&prcm_clocks {
clock-div = <78125>;
};
+ /* L4_HS 220 MHz*/
+ sysclk4_ck: sysclk4_ck {
+ #clock-cells = <0>;
+ compatible = "ti,fixed-factor-clock";
+ clocks = <&adpll_l3_ck 1>;
+ ti,clock-mult = <1>;
+ ti,clock-div = <1>;
+ };
+
+ /* L4_FWCFG */
+ sysclk5_ck: sysclk5_ck {
+ #clock-cells = <0>;
+ compatible = "ti,fixed-factor-clock";
+ clocks = <&adpll_l3_ck 1>;
+ ti,clock-mult = <1>;
+ ti,clock-div = <2>;
+ };
+
+ /* L4_LS 110 MHz */
+ sysclk6_ck: sysclk6_ck {
+ #clock-cells = <0>;
+ compatible = "ti,fixed-factor-clock";
+ clocks = <&adpll_l3_ck 1>;
+ ti,clock-mult = <1>;
+ ti,clock-div = <2>;
+ };
+
+ sysclk8_ck: sysclk8_ck {
+ #clock-cells = <0>;
+ compatible = "ti,fixed-factor-clock";
+ clocks = <&adpll_usb_ck 1>;
+ ti,clock-mult = <1>;
+ ti,clock-div = <1>;
+ };
+
+ sysclk10_ck: sysclk10_ck {
+ compatible = "ti,divider-clock";
+ reg = <0x324>;
+ ti,max-div = <7>;
+ #clock-cells = <0>;
+ clocks = <&adpll_usb_ck 1>;
+ };
+
aud_clkin0_ck: aud_clkin0_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
#include "dm814x-clocks.dtsi"
+/* Compared to dm814x, dra62x does not have hdic, l3 or dss PLLs */
+&adpll_hdvic_ck {
+ status = "disabled";
+};
+
+&adpll_l3_ck {
+ status = "disabled";
+};
+
+&adpll_dss_ck {
+ status = "disabled";
+};
+
+/* Compared to dm814x, dra62x has interconnect clocks on isp PLL */
+&sysclk4_ck {
+ clocks = <&adpll_isp_ck 1>;
+};
+
+&sysclk5_ck {
+ clocks = <&adpll_isp_ck 1>;
+};
+
+&sysclk6_ck {
+ clocks = <&adpll_isp_ck 1>;
+};
+
/*
* Compared to dm814x, dra62x has different shifts and more mux options.
* Please add the extra options for ysclk_14 and 16 if really needed.
clock-frequency = <32768>;
};
- sys_32k_ck: sys_32k_ck {
+ sys_clk32_crystal_ck: sys_clk32_crystal_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
};
+ sys_clk32_pseudo_ck: sys_clk32_pseudo_ck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&sys_clkin1>;
+ clock-mult = <1>;
+ clock-div = <610>;
+ };
+
virt_12000000_ck: virt_12000000_ck {
#clock-cells = <0>;
compatible = "fixed-clock";
ti,bit-shift = <22>;
reg = <0x0558>;
};
+
+ sys_32k_ck: sys_32k_ck {
+ #clock-cells = <0>;
+ compatible = "ti,mux-clock";
+ clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>;
+ ti,bit-shift = <8>;
+ reg = <0x6c4>;
+ };
};
regulator-name = "V28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
regulator-always-on; /* due to battery cover sensor */
};
regulator-name = "VCSI";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
};
&vaux3 {
regulator-name = "VMMC2_30";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
};
&vaux4 {
regulator-name = "VCAM_ANA_28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
};
&vmmc1 {
regulator-name = "VMMC1";
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <3150000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
};
&vmmc2 {
regulator-name = "V28_A";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
regulator-always-on; /* due VIO leak to AIC34 VDDs */
};
regulator-name = "VPLL";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
regulator-always-on;
};
regulator-name = "VSDI_CSI";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
regulator-always-on;
};
regulator-name = "VMMC2_IO_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
};
&vio {
0x480bd800 0x017c>;
interrupts = <24>;
iommus = <&mmu_isp>;
- syscon = <&scm_conf 0xdc>;
+ syscon = <&scm_conf 0x6c>;
ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>;
#clock-cells = <1>;
ports {
ldo1_reg: ldo1 {
/* VDDAPHY_CAM: vdda_csiport */
regulator-name = "ldo1";
- regulator-min-microvolt = <1500000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo4_reg: ldo4 {
/* VDDAPHY_DISP: vdda_dsiport/hdmi */
regulator-name = "ldo4";
- regulator-min-microvolt = <1500000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo1_reg: ldo1 {
/* VDDAPHY_CAM: vdda_csiport */
regulator-name = "ldo1";
- regulator-min-microvolt = <1500000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo4_reg: ldo4 {
/* VDDAPHY_DISP: vdda_dsiport/hdmi */
regulator-name = "ldo4";
- regulator-min-microvolt = <1500000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
omap5_pmx_wkup: pinmux@c840 {
compatible = "ti,omap5-padconf",
"pinctrl-single";
- reg = <0xc840 0x0038>;
+ reg = <0xc840 0x003c>;
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
};
sata0: sata@29000000 {
- compatible = "generic-ahci";
+ compatible = "qcom,apq8064-ahci", "generic-ahci";
status = "disabled";
reg = <0x29000000 0x180>;
interrupts = <GIC_SPI 209 IRQ_TYPE_NONE>;
phys = <&sata_phy0>;
phy-names = "sata-phy";
+ ports-implemented = <0x1>;
};
/* Temporary fixed regulator */
/dts-v1/;
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
#include "skeleton.dtsi"
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
- dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
- dma-names = "tx", "rx";
};
spmi_bus: spmi@fc4cf000 {
interrupt-controller;
#interrupt-cells = <4>;
};
-
- blsp2_dma: dma-controller@f9944000 {
- compatible = "qcom,bam-v1.4.0";
- reg = <0xf9944000 0x19000>;
- interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "bam_clk";
- #dma-cells = <1>;
- qcom,ee = <0>;
- };
};
smd {
};
&pcie_bus_clk {
+ clock-frequency = <100000000>;
status = "okay";
};
};
&pfc {
- pinctrl-0 = <&scif_clk_pins>;
- pinctrl-names = "default";
-
scif0_pins: serial0 {
renesas,groups = "scif0_data_d";
renesas,function = "scif0";
};
- scif_clk_pins: scif_clk {
- renesas,groups = "scif_clk";
- renesas,function = "scif_clk";
- };
-
ether_pins: ether {
renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
renesas,function = "eth";
status = "okay";
};
-&scif_clk {
- clock-frequency = <14745600>;
- status = "okay";
-};
-
ðer {
pinctrl-0 = <ðer_pins &phy1_pins>;
pinctrl-names = "default";
};
&pcie_bus_clk {
+ clock-frequency = <100000000>;
status = "okay";
};
pcie_bus_clk: pcie_bus_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <100000000>;
+ clock-frequency = <0>;
clock-output-names = "pcie_bus";
- status = "disabled";
};
/* External SCIF clock */
#clock-cells = <0>;
/* This value must be overridden by the board. */
clock-frequency = <0>;
- status = "disabled";
};
/* External USB clock - can be overridden by the board */
/* This value must be overridden by the board. */
clock-frequency = <0>;
clock-output-names = "can_clk";
- status = "disabled";
};
/* Special CPG clocks */
};
®_dc1sw {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
regulator-name = "vcc-lcd";
};
struct of_cpuidle_method {
const char *method;
- struct cpuidle_ops *ops;
+ const struct cpuidle_ops *ops;
};
#define CPUIDLE_METHOD_OF_DECLARE(name, _method, _ops) \
#ifndef __ASSEMBLY__
+#ifdef CONFIG_CPU_CP15_MMU
static inline unsigned int get_domain(void)
{
unsigned int domain;
: : "r" (val) : "memory");
isb();
}
+#else
+static inline unsigned int get_domain(void)
+{
+ return 0;
+}
+
+static inline void set_domain(unsigned val)
+{
+}
+#endif
#ifdef CONFIG_CPU_USE_DOMAINS
#define modify_domain(dom,type) \
*
* Returns a struct cpuidle_ops pointer, NULL if not found.
*/
-static struct cpuidle_ops *__init arm_cpuidle_get_ops(const char *method)
+static const struct cpuidle_ops *__init arm_cpuidle_get_ops(const char *method)
{
struct of_cpuidle_method *m = __cpuidle_method_of_table;
*
* Get the method name defined in the 'enable-method' property, retrieve the
* associated cpuidle_ops and do a struct copy. This copy is needed because all
- * cpuidle_ops are tagged __initdata and will be unloaded after the init
+ * cpuidle_ops are tagged __initconst and will be unloaded after the init
* process.
*
* Return 0 on sucess, -ENOENT if no 'enable-method' is defined, -EOPNOTSUPP if
static int __init arm_cpuidle_read_ops(struct device_node *dn, int cpu)
{
const char *enable_method;
- struct cpuidle_ops *ops;
+ const struct cpuidle_ops *ops;
enable_method = of_get_property(dn, "enable-method", NULL);
if (!enable_method)
mov r0, #CONFIG_VECTORS_BASE @ Cover from VECTORS_BASE
ldr r5,=(MPU_AP_PL1RW_PL0NA | MPU_RGN_NORMAL)
/* Writing N to bits 5:1 (RSR_SZ) --> region size 2^N+1 */
- mov r6, #(((PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN)
+ mov r6, #(((2 * PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN)
setup_region r0, r5, r6, MPU_DATA_SIDE @ VECTORS_BASE, PL0 NA, enabled
beq 3f @ Memory-map not unified
kvm_pfn_t pfn = *pfnp;
gfn_t gfn = *ipap >> PAGE_SHIFT;
- if (PageTransCompound(pfn_to_page(pfn))) {
+ if (PageTransCompoundMap(pfn_to_page(pfn))) {
unsigned long mask;
/*
* The address we faulted on is backed by a transparent huge
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
-static void __init berlin_init_late(void)
-{
- platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
-}
-
static const char * const berlin_dt_compat[] = {
"marvell,berlin",
NULL,
DT_MACHINE_START(BERLIN_DT, "Marvell Berlin")
.dt_compat = berlin_dt_compat,
- .init_late = berlin_init_late,
/*
* with DT probing for L2CCs, berlin_init_machine can be removed.
* Note: 88DE3005 (Armada 1500-mini) uses pl310 l2cc
const char *partnum = NULL;
struct davinci_soc_info *soc_info = &davinci_soc_info;
+ if (!IS_BUILTIN(CONFIG_NVMEM)) {
+ pr_warn("Factory Config not available without CONFIG_NVMEM\n");
+ goto bad_config;
+ }
+
ret = nvmem_device_read(nvmem, 0, sizeof(factory_config),
&factory_config);
if (ret != sizeof(struct factory_config)) {
char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
off_t offset = (off_t)context;
+ if (!IS_BUILTIN(CONFIG_NVMEM)) {
+ pr_warn("Cannot read MAC addr from EEPROM without CONFIG_NVMEM\n");
+ return;
+ }
+
/* Read MAC addr from EEPROM */
if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN)
pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
exynos_map_pmu();
}
-static const struct of_device_id exynos_cpufreq_matches[] = {
- { .compatible = "samsung,exynos3250", .data = "cpufreq-dt" },
- { .compatible = "samsung,exynos4210", .data = "cpufreq-dt" },
- { .compatible = "samsung,exynos4212", .data = "cpufreq-dt" },
- { .compatible = "samsung,exynos4412", .data = "cpufreq-dt" },
- { .compatible = "samsung,exynos5250", .data = "cpufreq-dt" },
-#ifndef CONFIG_BL_SWITCHER
- { .compatible = "samsung,exynos5420", .data = "cpufreq-dt" },
- { .compatible = "samsung,exynos5800", .data = "cpufreq-dt" },
-#endif
- { /* sentinel */ }
-};
-
-static void __init exynos_cpufreq_init(void)
-{
- struct device_node *root = of_find_node_by_path("/");
- const struct of_device_id *match;
-
- match = of_match_node(exynos_cpufreq_matches, root);
- if (!match) {
- platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
- return;
- }
-
- platform_device_register_simple(match->data, -1, NULL, 0);
-}
-
static void __init exynos_dt_machine_init(void)
{
/*
of_machine_is_compatible("samsung,exynos5250"))
platform_device_register(&exynos_cpuidle);
- exynos_cpufreq_init();
-
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
if (IS_ERR(pd->clk[i]))
break;
- if (IS_ERR(pd->clk[i]))
+ if (IS_ERR(pd->pclk[i]))
continue; /* Skip on first power up */
if (clk_set_parent(pd->clk[i], pd->pclk[i]))
pr_err("%s: error setting parent to clock%d\n",
if (!pdata)
pdata = &default_esdhc_pdata;
- return imx_add_platform_device(data->devid, data->id, res,
- ARRAY_SIZE(res), pdata, sizeof(*pdata));
+ return imx_add_platform_device_dmamask(data->devid, data->id, res,
+ ARRAY_SIZE(res), pdata, sizeof(*pdata),
+ DMA_BIT_MASK(32));
}
#include "common.h"
#include "mx27.h"
-static void __init imx27_dt_init(void)
-{
- struct platform_device_info devinfo = { .name = "cpufreq-dt", };
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
- platform_device_register_full(&devinfo);
-}
-
static const char * const imx27_dt_board_compat[] __initconst = {
"fsl,imx27",
NULL
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .init_machine = imx27_dt_init,
.dt_compat = imx27_dt_board_compat,
MACHINE_END
static void __init imx51_dt_init(void)
{
- struct platform_device_info devinfo = { .name = "cpufreq-dt", };
-
imx51_ipu_mipi_setup();
imx_src_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
- platform_device_register_full(&devinfo);
}
static void __init imx51_init_late(void)
static void __init imx53_init_late(void)
{
imx53_pm_init();
-
- platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
}
static const char * const imx53_dt_board_compat[] __initconst = {
irqchip_init();
}
-static void __init imx7d_init_late(void)
-{
- platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
-}
-
static const char *const imx7d_dt_compat[] __initconst = {
"fsl,imx7d",
NULL,
DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual (Device Tree)")
.init_irq = imx7d_init_irq,
- .init_late = imx7d_init_late,
.init_machine = imx7d_init_machine,
.dt_compat = imx7d_dt_compat,
MACHINE_END
#include <linux/clk.h>
#include <linux/cpu_pm.h>
-#include <linux/cpufreq-dt.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
-#include <linux/pm_opp.h>
#include <linux/resource.h>
#include <linux/slab.h>
#include <linux/smp.h>
return 0;
}
-
-struct cpufreq_dt_platform_data cpufreq_dt_pd = {
- .independent_clocks = true,
-};
-
-static int __init armada_xp_pmsu_cpufreq_init(void)
-{
- struct device_node *np;
- struct resource res;
- int ret, cpu;
-
- if (!of_machine_is_compatible("marvell,armadaxp"))
- return 0;
-
- /*
- * In order to have proper cpufreq handling, we need to ensure
- * that the Device Tree description of the CPU clock includes
- * the definition of the PMU DFS registers. If not, we do not
- * register the clock notifier and the cpufreq driver. This
- * piece of code is only for compatibility with old Device
- * Trees.
- */
- np = of_find_compatible_node(NULL, NULL, "marvell,armada-xp-cpu-clock");
- if (!np)
- return 0;
-
- ret = of_address_to_resource(np, 1, &res);
- if (ret) {
- pr_warn(FW_WARN "not enabling cpufreq, deprecated armada-xp-cpu-clock binding\n");
- of_node_put(np);
- return 0;
- }
-
- of_node_put(np);
-
- /*
- * For each CPU, this loop registers the operating points
- * supported (which are the nominal CPU frequency and half of
- * it), and registers the clock notifier that will take care
- * of doing the PMSU part of a frequency transition.
- */
- for_each_possible_cpu(cpu) {
- struct device *cpu_dev;
- struct clk *clk;
- int ret;
-
- cpu_dev = get_cpu_device(cpu);
- if (!cpu_dev) {
- pr_err("Cannot get CPU %d\n", cpu);
- continue;
- }
-
- clk = clk_get(cpu_dev, 0);
- if (IS_ERR(clk)) {
- pr_err("Cannot get clock for CPU %d\n", cpu);
- return PTR_ERR(clk);
- }
-
- /*
- * In case of a failure of dev_pm_opp_add(), we don't
- * bother with cleaning up the registered OPP (there's
- * no function to do so), and simply cancel the
- * registration of the cpufreq device.
- */
- ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk), 0);
- if (ret) {
- clk_put(clk);
- return ret;
- }
-
- ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk) / 2, 0);
- if (ret) {
- clk_put(clk);
- return ret;
- }
- }
-
- platform_device_register_data(NULL, "cpufreq-dt", -1,
- &cpufreq_dt_pd, sizeof(cpufreq_dt_pd));
- return 0;
-}
-
-device_initcall(armada_xp_pmsu_cpufreq_init);
.cm_inst = DRA7XX_CM_CORE_AON_IPU_INST,
.clkdm_offs = DRA7XX_CM_CORE_AON_IPU_IPU_CDOFFS,
.dep_bit = DRA7XX_IPU_STATDEP_SHIFT,
- .flags = CLKDM_CAN_HWSUP_SWSUP,
+ .flags = CLKDM_CAN_SWSUP,
};
static struct clockdomain mpu1_7xx_clkdm = {
#ifdef CONFIG_SOC_DRA7XX
void __init dra7xx_init_early(void)
{
- omap2_set_globals_tap(-1, OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
+ omap2_set_globals_tap(DRA7XX_CLASS,
+ OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
omap2_control_base_init();
omap4_pm_init_early();
*/
static void irq_save_context(void)
{
+ /* DRA7 has no SAR to save */
+ if (soc_is_dra7xx())
+ return;
+
if (!sar_base)
sar_base = omap4_get_sar_ram_base();
{
u32 val;
u32 offset = SAR_BACKUP_STATUS_OFFSET;
+ /* DRA7 has no SAR to save */
+ if (soc_is_dra7xx())
+ return;
if (soc_is_omap54xx())
offset = OMAP5_SAR_BACKUP_STATUS_OFFSET;
static inline void omap_init_cpufreq(void)
{
- struct platform_device_info devinfo = { };
+ struct platform_device_info devinfo = { .name = "omap-cpufreq" };
if (!of_have_populated_dt())
- devinfo.name = "omap-cpufreq";
- else
- devinfo.name = "cpufreq-dt";
- platform_device_register_full(&devinfo);
+ platform_device_register_full(&devinfo);
}
static int __init omap2_common_pm_init(void)
int per_next_state = PWRDM_POWER_ON;
int core_next_state = PWRDM_POWER_ON;
int per_going_off;
- int core_prev_state;
u32 sdrc_pwr = 0;
mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
sdrc_write_reg(sdrc_pwr, SDRC_POWER);
/* CORE */
- if (core_next_state < PWRDM_POWER_ON) {
- core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm);
- if (core_prev_state == PWRDM_POWER_OFF) {
- omap3_core_restore_context();
- omap3_cm_restore_context();
- omap3_sram_restore_context();
- omap2_sms_restore_context();
- }
+ if (core_next_state < PWRDM_POWER_ON &&
+ pwrdm_read_prev_pwrst(core_pwrdm) == PWRDM_POWER_OFF) {
+ omap3_core_restore_context();
+ omap3_cm_restore_context();
+ omap3_sram_restore_context();
+ omap2_sms_restore_context();
+ } else {
+ /*
+ * In off-mode resume path above, omap3_core_restore_context
+ * also handles the INTC autoidle restore done here so limit
+ * this to non-off mode resume paths so we don't do it twice.
+ */
+ omap3_intc_resume_idle();
}
- omap3_intc_resume_idle();
pwrdm_post_transition(NULL);
{
rockchip_suspend_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
- platform_device_register_simple("cpufreq-dt", 0, NULL, 0);
}
static const char * const rockchip_board_dt_compat[] = {
# PM objects
obj-$(CONFIG_SUSPEND) += suspend.o
-obj-$(CONFIG_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_PM_RCAR) += pm-rcar.o
obj-$(CONFIG_PM_RMOBILE) += pm-rmobile.o
obj-$(CONFIG_ARCH_RCAR_GEN2) += pm-rcar-gen2.o
static inline void shmobile_smp_apmu_suspend_init(void) { }
#endif
-#ifdef CONFIG_CPU_FREQ
-int shmobile_cpufreq_init(void);
-#else
-static inline int shmobile_cpufreq_init(void) { return 0; }
-#endif
-
static inline void __init shmobile_init_late(void)
{
shmobile_suspend_init();
- shmobile_cpufreq_init();
}
#endif /* __ARCH_MACH_COMMON_H */
+++ /dev/null
-/*
- * CPUFreq support code for SH-Mobile ARM
- *
- * Copyright (C) 2014 Gaku Inami
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/platform_device.h>
-
-#include "common.h"
-
-int __init shmobile_cpufreq_init(void)
-{
- platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
- return 0;
-}
void __init shmobile_init_delay(void)
{
struct device_node *np, *cpus;
- bool is_a7_a8_a9 = false;
- bool is_a15 = false;
+ unsigned int div = 0;
bool has_arch_timer = false;
u32 max_freq = 0;
if (!of_property_read_u32(np, "clock-frequency", &freq))
max_freq = max(max_freq, freq);
- if (of_device_is_compatible(np, "arm,cortex-a8") ||
- of_device_is_compatible(np, "arm,cortex-a9")) {
- is_a7_a8_a9 = true;
- } else if (of_device_is_compatible(np, "arm,cortex-a7")) {
- is_a7_a8_a9 = true;
- has_arch_timer = true;
- } else if (of_device_is_compatible(np, "arm,cortex-a15")) {
- is_a15 = true;
+ if (of_device_is_compatible(np, "arm,cortex-a8")) {
+ div = 2;
+ } else if (of_device_is_compatible(np, "arm,cortex-a9")) {
+ div = 1;
+ } else if (of_device_is_compatible(np, "arm,cortex-a7") ||
+ of_device_is_compatible(np, "arm,cortex-a15")) {
+ div = 1;
has_arch_timer = true;
}
}
of_node_put(cpus);
- if (!max_freq)
+ if (!max_freq || !div)
return;
- if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) {
- if (is_a7_a8_a9)
- shmobile_setup_delay_hz(max_freq, 1, 3);
- else if (is_a15)
- shmobile_setup_delay_hz(max_freq, 2, 4);
- }
+ if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
+ shmobile_setup_delay_hz(max_freq, 1, div);
}
#include <asm/assembler.h>
.arch armv7-a
+ .arm
ENTRY(secondary_trampoline)
/* CPU1 will always fetch from 0x0 when it is brought out of reset.
#include <asm/mach/arch.h>
-static void __init sunxi_dt_cpufreq_init(void)
-{
- platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
-}
-
static const char * const sunxi_board_dt_compat[] = {
"allwinner,sun4i-a10",
"allwinner,sun5i-a10s",
DT_MACHINE_START(SUNXI_DT, "Allwinner sun4i/sun5i Families")
.dt_compat = sunxi_board_dt_compat,
- .init_late = sunxi_dt_cpufreq_init,
MACHINE_END
static const char * const sun6i_board_dt_compat[] = {
DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family")
.init_time = sun6i_timer_init,
.dt_compat = sun6i_board_dt_compat,
- .init_late = sunxi_dt_cpufreq_init,
MACHINE_END
static const char * const sun7i_board_dt_compat[] = {
DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family")
.dt_compat = sun7i_board_dt_compat,
- .init_late = sunxi_dt_cpufreq_init,
MACHINE_END
static const char * const sun8i_board_dt_compat[] = {
DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i Family")
.init_time = sun6i_timer_init,
.dt_compat = sun8i_board_dt_compat,
- .init_late = sunxi_dt_cpufreq_init,
MACHINE_END
static const char * const sun9i_board_dt_compat[] = {
*/
static void __init zynq_init_machine(void)
{
- struct platform_device_info devinfo = { .name = "cpufreq-dt", };
struct soc_device_attribute *soc_dev_attr;
struct soc_device *soc_dev;
struct device *parent = NULL;
of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
platform_device_register(&zynq_cpuidle_device);
- platform_device_register_full(&devinfo);
}
static void __init zynq_timer_init(void)
/* MPU initialisation functions */
void __init sanity_check_meminfo_mpu(void)
{
- int i;
phys_addr_t phys_offset = PHYS_OFFSET;
phys_addr_t aligned_region_size, specified_mem_size, rounded_mem_size;
struct memblock_region *reg;
} else {
/*
* memblock auto merges contiguous blocks, remove
- * all blocks afterwards
+ * all blocks afterwards in one go (we can't remove
+ * blocks separately while iterating)
*/
pr_notice("Ignoring RAM after %pa, memory at %pa ignored\n",
- &mem_start, ®->base);
- memblock_remove(reg->base, reg->size);
+ &mem_end, ®->base);
+ memblock_remove(reg->base, 0 - reg->base);
+ break;
}
}
pr_warn("Truncating memory from %pa to %pa (MPU region constraints)",
&specified_mem_size, &aligned_region_size);
memblock_remove(mem_start + aligned_region_size,
- specified_mem_size - aligned_round_size);
+ specified_mem_size - aligned_region_size);
mem_end = mem_start + aligned_region_size;
}
return;
region_err = mpu_setup_region(MPU_RAM_REGION, PHYS_OFFSET,
- ilog2(meminfo.bank[0].size),
+ ilog2(memblock.memory.regions[0].size),
MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL);
if (region_err) {
panic("MPU region initialization failure! %d", region_err);
* some architectures which the DRAM is the exception vector to trap,
* alloc_page breaks with error, although it is not NULL, but "0."
*/
- memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE);
+ memblock_reserve(CONFIG_VECTORS_BASE, 2 * PAGE_SIZE);
#else /* ifndef CONFIG_CPU_V7M */
/*
* There is no dedicated vector page on V7-M. So nothing needs to be
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
- status = "disabled";
};
soc {
i2c3 = &i2c3;
i2c4 = &i2c4;
i2c5 = &i2c5;
- i2c6 = &i2c6;
};
};
i2c2: i2c@58782000 {
compatible = "socionext,uniphier-fi2c";
- status = "disabled";
reg = <0x58782000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 43 4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
clocks = <&i2c_clk>;
- clock-frequency = <100000>;
+ clock-frequency = <400000>;
};
i2c3: i2c@58783000 {
i2c4: i2c@58784000 {
compatible = "socionext,uniphier-fi2c";
+ status = "disabled";
reg = <0x58784000 0x80>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <0 45 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
clocks = <&i2c_clk>;
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
};
i2c5: i2c@58785000 {
clock-frequency = <400000>;
};
- i2c6: i2c@58786000 {
- compatible = "socionext,uniphier-fi2c";
- reg = <0x58786000 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <0 26 4>;
- clocks = <&i2c_clk>;
- clock-frequency = <400000>;
- };
-
system_bus: system-bus@58c00000 {
compatible = "socionext,uniphier-system-bus";
status = "disabled";
"=r" (charcnt), /* %1 Output */
"=r" (dwordcnt), /* %2 Output */
"=r" (fill8reg), /* %3 Output */
- "=r" (wrkrega) /* %4 Output */
+ "=&r" (wrkrega) /* %4 Output only */
: "r" (c), /* %5 Input */
"0" (s), /* %0 Input/Output */
"1" (count) /* %1 Input/Output */
#endif
cmpib,COND(=),n -1,%r20,tracesys_exit /* seccomp may have returned -1 */
- comiclr,>>= __NR_Linux_syscalls, %r20, %r0
+ comiclr,>> __NR_Linux_syscalls, %r20, %r0
b,n .Ltracesys_nosys
LDREGX %r20(%r19), %r19
SYSCALL(ni_syscall)
SYSCALL(mlock2)
SYSCALL(copy_file_range)
+COMPAT_SYS_SPU(preadv2)
+COMPAT_SYS_SPU(pwritev2)
#include <uapi/asm/unistd.h>
-#define NR_syscalls 380
+#define NR_syscalls 382
#define __NR__exit __NR_exit
"andc %1,%1,%2\n\t"
"popcntd %0,%1"
: "=r" (leading_zero_bits), "=&r" (trailing_zero_bit_mask)
- : "r" (bits));
+ : "b" (bits));
return leading_zero_bits;
}
#define __NR_membarrier 365
#define __NR_mlock2 378
#define __NR_copy_file_range 379
+#define __NR_preadv2 380
+#define __NR_pwritev2 381
#endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */
spinlock_t list_lock;
struct list_head pgtable_list;
struct list_head gmap_list;
- unsigned long asce_bits;
+ unsigned long asce;
unsigned long asce_limit;
unsigned long vdso_base;
/* The mmu context allocates 4K page tables. */
mm->context.has_pgste = 0;
mm->context.use_skey = 0;
#endif
- if (mm->context.asce_limit == 0) {
+ switch (mm->context.asce_limit) {
+ case 1UL << 42:
+ /*
+ * forked 3-level task, fall through to set new asce with new
+ * mm->pgd
+ */
+ case 0:
/* context created by exec, set asce limit to 4TB */
- mm->context.asce_bits = _ASCE_TABLE_LENGTH |
- _ASCE_USER_BITS | _ASCE_TYPE_REGION3;
mm->context.asce_limit = STACK_TOP_MAX;
- } else if (mm->context.asce_limit == (1UL << 31)) {
+ mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
+ _ASCE_USER_BITS | _ASCE_TYPE_REGION3;
+ break;
+ case 1UL << 53:
+ /* forked 4-level task, set new asce with new mm->pgd */
+ mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
+ _ASCE_USER_BITS | _ASCE_TYPE_REGION2;
+ break;
+ case 1UL << 31:
+ /* forked 2-level compat task, set new asce with new mm->pgd */
+ mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
+ _ASCE_USER_BITS | _ASCE_TYPE_SEGMENT;
+ /* pgd_alloc() did not increase mm->nr_pmds */
mm_inc_nr_pmds(mm);
}
crst_table_init((unsigned long *) mm->pgd, pgd_entry_type(mm));
static inline void set_user_asce(struct mm_struct *mm)
{
- S390_lowcore.user_asce = mm->context.asce_bits | __pa(mm->pgd);
+ S390_lowcore.user_asce = mm->context.asce;
if (current->thread.mm_segment.ar4)
__ctl_load(S390_lowcore.user_asce, 7, 7);
set_cpu_flag(CIF_ASCE);
{
int cpu = smp_processor_id();
- S390_lowcore.user_asce = next->context.asce_bits | __pa(next->pgd);
+ S390_lowcore.user_asce = next->context.asce;
if (prev == next)
return;
if (MACHINE_HAS_TLB_LC)
return _REGION2_ENTRY_EMPTY;
}
-int crst_table_upgrade(struct mm_struct *, unsigned long limit);
-void crst_table_downgrade(struct mm_struct *, unsigned long limit);
+int crst_table_upgrade(struct mm_struct *);
+void crst_table_downgrade(struct mm_struct *);
static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long address)
{
regs->psw.mask = PSW_USER_BITS | PSW_MASK_BA; \
regs->psw.addr = new_psw; \
regs->gprs[15] = new_stackp; \
- crst_table_downgrade(current->mm, 1UL << 31); \
+ crst_table_downgrade(current->mm); \
execve_tail(); \
} while (0)
static inline void __tlb_flush_kernel(void)
{
if (MACHINE_HAS_IDTE)
- __tlb_flush_idte((unsigned long) init_mm.pgd |
- init_mm.context.asce_bits);
+ __tlb_flush_idte(init_mm.context.asce);
else
__tlb_flush_global();
}
static inline void __tlb_flush_kernel(void)
{
if (MACHINE_HAS_TLB_LC)
- __tlb_flush_idte_local((unsigned long) init_mm.pgd |
- init_mm.context.asce_bits);
+ __tlb_flush_idte_local(init_mm.context.asce);
else
__tlb_flush_local();
}
* only ran on the local cpu.
*/
if (MACHINE_HAS_IDTE && list_empty(&mm->context.gmap_list))
- __tlb_flush_asce(mm, (unsigned long) mm->pgd |
- mm->context.asce_bits);
+ __tlb_flush_asce(mm, mm->context.asce);
else
__tlb_flush_full(mm);
}
asce_bits = _ASCE_TYPE_REGION3 | _ASCE_TABLE_LENGTH;
pgd_type = _REGION3_ENTRY_EMPTY;
}
- S390_lowcore.kernel_asce = (__pa(init_mm.pgd) & PAGE_MASK) | asce_bits;
+ init_mm.context.asce = (__pa(init_mm.pgd) & PAGE_MASK) | asce_bits;
+ S390_lowcore.kernel_asce = init_mm.context.asce;
clear_table((unsigned long *) init_mm.pgd, pgd_type,
sizeof(unsigned long)*2048);
vmem_map_init();
if (!(flags & MAP_FIXED))
addr = 0;
if ((addr + len) >= TASK_SIZE)
- return crst_table_upgrade(current->mm, TASK_MAX_SIZE);
+ return crst_table_upgrade(current->mm);
return 0;
}
return area;
if (area == -ENOMEM && !is_compat_task() && TASK_SIZE < TASK_MAX_SIZE) {
/* Upgrade the page table to 4 levels and retry. */
- rc = crst_table_upgrade(mm, TASK_MAX_SIZE);
+ rc = crst_table_upgrade(mm);
if (rc)
return (unsigned long) rc;
area = arch_get_unmapped_area(filp, addr, len, pgoff, flags);
return area;
if (area == -ENOMEM && !is_compat_task() && TASK_SIZE < TASK_MAX_SIZE) {
/* Upgrade the page table to 4 levels and retry. */
- rc = crst_table_upgrade(mm, TASK_MAX_SIZE);
+ rc = crst_table_upgrade(mm);
if (rc)
return (unsigned long) rc;
area = arch_get_unmapped_area_topdown(filp, addr, len,
__tlb_flush_local();
}
-int crst_table_upgrade(struct mm_struct *mm, unsigned long limit)
+int crst_table_upgrade(struct mm_struct *mm)
{
unsigned long *table, *pgd;
- unsigned long entry;
- int flush;
- BUG_ON(limit > TASK_MAX_SIZE);
- flush = 0;
-repeat:
+ /* upgrade should only happen from 3 to 4 levels */
+ BUG_ON(mm->context.asce_limit != (1UL << 42));
+
table = crst_table_alloc(mm);
if (!table)
return -ENOMEM;
+
spin_lock_bh(&mm->page_table_lock);
- if (mm->context.asce_limit < limit) {
- pgd = (unsigned long *) mm->pgd;
- if (mm->context.asce_limit <= (1UL << 31)) {
- entry = _REGION3_ENTRY_EMPTY;
- mm->context.asce_limit = 1UL << 42;
- mm->context.asce_bits = _ASCE_TABLE_LENGTH |
- _ASCE_USER_BITS |
- _ASCE_TYPE_REGION3;
- } else {
- entry = _REGION2_ENTRY_EMPTY;
- mm->context.asce_limit = 1UL << 53;
- mm->context.asce_bits = _ASCE_TABLE_LENGTH |
- _ASCE_USER_BITS |
- _ASCE_TYPE_REGION2;
- }
- crst_table_init(table, entry);
- pgd_populate(mm, (pgd_t *) table, (pud_t *) pgd);
- mm->pgd = (pgd_t *) table;
- mm->task_size = mm->context.asce_limit;
- table = NULL;
- flush = 1;
- }
+ pgd = (unsigned long *) mm->pgd;
+ crst_table_init(table, _REGION2_ENTRY_EMPTY);
+ pgd_populate(mm, (pgd_t *) table, (pud_t *) pgd);
+ mm->pgd = (pgd_t *) table;
+ mm->context.asce_limit = 1UL << 53;
+ mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
+ _ASCE_USER_BITS | _ASCE_TYPE_REGION2;
+ mm->task_size = mm->context.asce_limit;
spin_unlock_bh(&mm->page_table_lock);
- if (table)
- crst_table_free(mm, table);
- if (mm->context.asce_limit < limit)
- goto repeat;
- if (flush)
- on_each_cpu(__crst_table_upgrade, mm, 0);
+
+ on_each_cpu(__crst_table_upgrade, mm, 0);
return 0;
}
-void crst_table_downgrade(struct mm_struct *mm, unsigned long limit)
+void crst_table_downgrade(struct mm_struct *mm)
{
pgd_t *pgd;
+ /* downgrade should only happen from 3 to 2 levels (compat only) */
+ BUG_ON(mm->context.asce_limit != (1UL << 42));
+
if (current->active_mm == mm) {
clear_user_asce();
__tlb_flush_mm(mm);
}
- while (mm->context.asce_limit > limit) {
- pgd = mm->pgd;
- switch (pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) {
- case _REGION_ENTRY_TYPE_R2:
- mm->context.asce_limit = 1UL << 42;
- mm->context.asce_bits = _ASCE_TABLE_LENGTH |
- _ASCE_USER_BITS |
- _ASCE_TYPE_REGION3;
- break;
- case _REGION_ENTRY_TYPE_R3:
- mm->context.asce_limit = 1UL << 31;
- mm->context.asce_bits = _ASCE_TABLE_LENGTH |
- _ASCE_USER_BITS |
- _ASCE_TYPE_SEGMENT;
- break;
- default:
- BUG();
- }
- mm->pgd = (pgd_t *) (pgd_val(*pgd) & _REGION_ENTRY_ORIGIN);
- mm->task_size = mm->context.asce_limit;
- crst_table_free(mm, (unsigned long *) pgd);
- }
+
+ pgd = mm->pgd;
+ mm->pgd = (pgd_t *) (pgd_val(*pgd) & _REGION_ENTRY_ORIGIN);
+ mm->context.asce_limit = 1UL << 31;
+ mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
+ _ASCE_USER_BITS | _ASCE_TYPE_SEGMENT;
+ mm->task_size = mm->context.asce_limit;
+ crst_table_free(mm, (unsigned long *) pgd);
+
if (current->active_mm == mm)
set_user_asce(mm);
}
zdev->dma_table = dma_alloc_cpu_table();
if (!zdev->dma_table) {
rc = -ENOMEM;
- goto out_clean;
+ goto out;
}
/*
zdev->iommu_bitmap = vzalloc(zdev->iommu_pages / 8);
if (!zdev->iommu_bitmap) {
rc = -ENOMEM;
- goto out_reg;
+ goto free_dma_table;
}
rc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
(u64) zdev->dma_table);
if (rc)
- goto out_reg;
- return 0;
+ goto free_bitmap;
-out_reg:
+ return 0;
+free_bitmap:
+ vfree(zdev->iommu_bitmap);
+ zdev->iommu_bitmap = NULL;
+free_dma_table:
dma_free_cpu_table(zdev->dma_table);
-out_clean:
+ zdev->dma_table = NULL;
+out:
return rc;
}
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
# CONFIG_INET_LRO is not set
-CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
-CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
#define SUN4V_CHIP_SPARC_M6 0x06
#define SUN4V_CHIP_SPARC_M7 0x07
#define SUN4V_CHIP_SPARC64X 0x8a
+#define SUN4V_CHIP_SPARC_SN 0x8b
#define SUN4V_CHIP_UNKNOWN 0xff
#ifndef __ASSEMBLY__
#define __NR_setsockopt 355
#define __NR_mlock2 356
#define __NR_copy_file_range 357
+#define __NR_preadv2 358
+#define __NR_pwritev2 359
-#define NR_syscalls 358
+#define NR_syscalls 360
/* Bitmask values returned from kern_features system call. */
#define KERN_FEATURE_MIXED_MODE_STACK 0x00000001
subcc %g1, %g2, %g1 ! Next cacheline
bge,pt %icc, 1b
nop
- ba,pt %xcc, dcpe_icpe_tl1_common
- nop
+ ba,a,pt %xcc, dcpe_icpe_tl1_common
do_dcpe_tl1_fatal:
sethi %hi(1f), %g7
mov 0x2, %o0
call cheetah_plus_parity_error
add %sp, PTREGS_OFF, %o1
- ba,pt %xcc, rtrap
- nop
+ ba,a,pt %xcc, rtrap
.size do_dcpe_tl1,.-do_dcpe_tl1
.globl do_icpe_tl1
subcc %g1, %g2, %g1
bge,pt %icc, 1b
nop
- ba,pt %xcc, dcpe_icpe_tl1_common
- nop
+ ba,a,pt %xcc, dcpe_icpe_tl1_common
do_icpe_tl1_fatal:
sethi %hi(1f), %g7
mov 0x3, %o0
call cheetah_plus_parity_error
add %sp, PTREGS_OFF, %o1
- ba,pt %xcc, rtrap
- nop
+ ba,a,pt %xcc, rtrap
.size do_icpe_tl1,.-do_icpe_tl1
.type dcpe_icpe_tl1_common,#function
cmp %g2, 0x63
be c_cee
nop
- ba,pt %xcc, c_deferred
+ ba,a,pt %xcc, c_deferred
.size __cheetah_log_error,.-__cheetah_log_error
/* Cheetah FECC trap handling, we get here from tl{0,1}_fecc
sparc_pmu_type = "sparc-m7";
break;
+ case SUN4V_CHIP_SPARC_SN:
+ sparc_cpu_type = "SPARC-SN";
+ sparc_fpu_type = "SPARC-SN integrated FPU";
+ sparc_pmu_type = "sparc-sn";
+ break;
+
case SUN4V_CHIP_SPARC64X:
sparc_cpu_type = "SPARC64-X";
sparc_fpu_type = "SPARC64-X integrated FPU";
case SUN4V_CHIP_NIAGARA5:
case SUN4V_CHIP_SPARC_M6:
case SUN4V_CHIP_SPARC_M7:
+ case SUN4V_CHIP_SPARC_SN:
case SUN4V_CHIP_SPARC64X:
rover_inc_table = niagara_iterate_method;
break;
fmuld %f0, %f2, %f26
faddd %f0, %f2, %f28
fmuld %f0, %f2, %f30
- b,pt %xcc, fpdis_exit
- nop
+ ba,a,pt %xcc, fpdis_exit
+
2: andcc %g5, FPRS_DU, %g0
bne,pt %icc, 3f
fzero %f32
fmuld %f32, %f34, %f58
faddd %f32, %f34, %f60
fmuld %f32, %f34, %f62
- ba,pt %xcc, fpdis_exit
- nop
+ ba,a,pt %xcc, fpdis_exit
+
3: mov SECONDARY_CONTEXT, %g3
add %g6, TI_FPREGS, %g1
fp_other_bounce:
call do_fpother
add %sp, PTREGS_OFF, %o0
- ba,pt %xcc, rtrap
- nop
+ ba,a,pt %xcc, rtrap
.size fp_other_bounce,.-fp_other_bounce
.align 32
cmp %g2, 'T'
be,pt %xcc, 70f
cmp %g2, 'M'
+ be,pt %xcc, 70f
+ cmp %g2, 'S'
bne,pn %xcc, 49f
nop
cmp %g2, '7'
be,pt %xcc, 5f
mov SUN4V_CHIP_SPARC_M7, %g4
+ cmp %g2, 'N'
+ be,pt %xcc, 5f
+ mov SUN4V_CHIP_SPARC_SN, %g4
ba,pt %xcc, 49f
nop
subcc %g3, 1, %g3
bne,pt %xcc, 41b
add %g1, 1, %g1
- mov SUN4V_CHIP_SPARC64X, %g4
ba,pt %xcc, 5f
- nop
+ mov SUN4V_CHIP_SPARC64X, %g4
49:
mov SUN4V_CHIP_UNKNOWN, %g4
stxa %g0, [%g7] ASI_DMMU
membar #Sync
- ba,pt %xcc, sun4u_continue
- nop
+ ba,a,pt %xcc, sun4u_continue
sun4v_init:
/* Set ctx 0 */
mov SECONDARY_CONTEXT, %g7
stxa %g0, [%g7] ASI_MMU
membar #Sync
- ba,pt %xcc, niagara_tlb_fixup
- nop
+ ba,a,pt %xcc, niagara_tlb_fixup
sun4u_continue:
BRANCH_IF_ANY_CHEETAH(g1, g7, cheetah_tlb_fixup)
- ba,pt %xcc, spitfire_tlb_fixup
- nop
+ ba,a,pt %xcc, spitfire_tlb_fixup
niagara_tlb_fixup:
mov 3, %g2 /* Set TLB type to hypervisor. */
be,pt %xcc, niagara4_patch
nop
cmp %g1, SUN4V_CHIP_SPARC_M7
+ be,pt %xcc, niagara4_patch
+ nop
+ cmp %g1, SUN4V_CHIP_SPARC_SN
be,pt %xcc, niagara4_patch
nop
call hypervisor_patch_cachetlbops
nop
- ba,pt %xcc, tlb_fixup_done
- nop
+ ba,a,pt %xcc, tlb_fixup_done
cheetah_tlb_fixup:
mov 2, %g2 /* Set TLB type to cheetah+. */
call cheetah_patch_cachetlbops
nop
- ba,pt %xcc, tlb_fixup_done
- nop
+ ba,a,pt %xcc, tlb_fixup_done
spitfire_tlb_fixup:
/* Set TLB type to spitfire. */
call %o1
add %sp, (2047 + 128), %o0
- ba,pt %xcc, 2f
- nop
+ ba,a,pt %xcc, 2f
1: sethi %hi(sparc64_ttable_tl0), %o0
set prom_set_trap_table_name, %g2
BRANCH_IF_ANY_CHEETAH(o2, o3, 1f)
- ba,pt %xcc, 2f
- nop
+ ba,a,pt %xcc, 2f
/* Disable STICK_INT interrupts. */
1:
109: or %g7, %lo(109b), %g7
call do_privact
add %sp, PTREGS_OFF, %o0
- ba,pt %xcc, rtrap
- nop
+ ba,a,pt %xcc, rtrap
.size __do_privact,.-__do_privact
.type do_mna,#function
mov %l5, %o2
call mem_address_unaligned
add %sp, PTREGS_OFF, %o0
- ba,pt %xcc, rtrap
- nop
+ ba,a,pt %xcc, rtrap
.size do_mna,.-do_mna
.type do_lddfmna,#function
mov %l5, %o2
call handle_lddfmna
add %sp, PTREGS_OFF, %o0
- ba,pt %xcc, rtrap
- nop
+ ba,a,pt %xcc, rtrap
.size do_lddfmna,.-do_lddfmna
.type do_stdfmna,#function
mov %l5, %o2
call handle_stdfmna
add %sp, PTREGS_OFF, %o0
- ba,pt %xcc, rtrap
- nop
+ ba,a,pt %xcc, rtrap
.size do_stdfmna,.-do_stdfmna
.type breakpoint_trap,#function
}
}
+static void pci_init_dev_archdata(struct dev_archdata *sd, void *iommu,
+ void *stc, void *host_controller,
+ struct platform_device *op,
+ int numa_node)
+{
+ sd->iommu = iommu;
+ sd->stc = stc;
+ sd->host_controller = host_controller;
+ sd->op = op;
+ sd->numa_node = numa_node;
+}
+
static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
struct device_node *node,
struct pci_bus *bus, int devfn)
if (!dev)
return NULL;
+ op = of_find_device_by_node(node);
sd = &dev->dev.archdata;
- sd->iommu = pbm->iommu;
- sd->stc = &pbm->stc;
- sd->host_controller = pbm;
- sd->op = op = of_find_device_by_node(node);
- sd->numa_node = pbm->numa_node;
-
+ pci_init_dev_archdata(sd, pbm->iommu, &pbm->stc, pbm, op,
+ pbm->numa_node);
sd = &op->dev.archdata;
sd->iommu = pbm->iommu;
sd->stc = &pbm->stc;
/* No special bus mastering setup handling */
}
+#ifdef CONFIG_PCI_IOV
+int pcibios_add_device(struct pci_dev *dev)
+{
+ struct pci_dev *pdev;
+
+ /* Add sriov arch specific initialization here.
+ * Copy dev_archdata from PF to VF
+ */
+ if (dev->is_virtfn) {
+ struct dev_archdata *psd;
+
+ pdev = dev->physfn;
+ psd = &pdev->dev.archdata;
+ pci_init_dev_archdata(&dev->dev.archdata, psd->iommu,
+ psd->stc, psd->host_controller, NULL,
+ psd->numa_node);
+ }
+ return 0;
+}
+#endif /* CONFIG_PCI_IOV */
+
static int __init pcibios_init(void)
{
pci_dfl_cache_line_size = 64 >> 2;
sun4v_patch_2insn_range(&__sun4v_2insn_patch,
&__sun4v_2insn_patch_end);
- if (sun4v_chip_type == SUN4V_CHIP_SPARC_M7)
+ if (sun4v_chip_type == SUN4V_CHIP_SPARC_M7 ||
+ sun4v_chip_type == SUN4V_CHIP_SPARC_SN)
sun_m7_patch_2insn_range(&__sun_m7_2insn_patch,
&__sun_m7_2insn_patch_end);
sun4v_chip_type == SUN4V_CHIP_NIAGARA5 ||
sun4v_chip_type == SUN4V_CHIP_SPARC_M6 ||
sun4v_chip_type == SUN4V_CHIP_SPARC_M7 ||
+ sun4v_chip_type == SUN4V_CHIP_SPARC_SN ||
sun4v_chip_type == SUN4V_CHIP_SPARC64X)
cap |= HWCAP_SPARC_BLKINIT;
if (sun4v_chip_type == SUN4V_CHIP_NIAGARA2 ||
sun4v_chip_type == SUN4V_CHIP_NIAGARA5 ||
sun4v_chip_type == SUN4V_CHIP_SPARC_M6 ||
sun4v_chip_type == SUN4V_CHIP_SPARC_M7 ||
+ sun4v_chip_type == SUN4V_CHIP_SPARC_SN ||
sun4v_chip_type == SUN4V_CHIP_SPARC64X)
cap |= HWCAP_SPARC_N2;
}
sun4v_chip_type == SUN4V_CHIP_NIAGARA5 ||
sun4v_chip_type == SUN4V_CHIP_SPARC_M6 ||
sun4v_chip_type == SUN4V_CHIP_SPARC_M7 ||
+ sun4v_chip_type == SUN4V_CHIP_SPARC_SN ||
sun4v_chip_type == SUN4V_CHIP_SPARC64X)
cap |= (AV_SPARC_VIS | AV_SPARC_VIS2 |
AV_SPARC_ASI_BLK_INIT |
sun4v_chip_type == SUN4V_CHIP_NIAGARA5 ||
sun4v_chip_type == SUN4V_CHIP_SPARC_M6 ||
sun4v_chip_type == SUN4V_CHIP_SPARC_M7 ||
+ sun4v_chip_type == SUN4V_CHIP_SPARC_SN ||
sun4v_chip_type == SUN4V_CHIP_SPARC64X)
cap |= (AV_SPARC_VIS3 | AV_SPARC_HPC |
AV_SPARC_FMAF);
ba,pt %xcc, etraptl1
rd %pc, %g7
- ba,pt %xcc, 2f
- nop
+ ba,a,pt %xcc, 2f
1: ba,pt %xcc, etrap_irq
rd %pc, %g7
mov %l5, %o2
call spitfire_access_error
add %sp, PTREGS_OFF, %o0
- ba,pt %xcc, rtrap
- nop
+ ba,a,pt %xcc, rtrap
.size __spitfire_access_error,.-__spitfire_access_error
/* This is the trap handler entry point for ECC correctable
mov %l5, %o2
call spitfire_data_access_exception_tl1
add %sp, PTREGS_OFF, %o0
- ba,pt %xcc, rtrap
- nop
+ ba,a,pt %xcc, rtrap
.size __spitfire_data_access_exception_tl1,.-__spitfire_data_access_exception_tl1
.type __spitfire_data_access_exception,#function
mov %l5, %o2
call spitfire_data_access_exception
add %sp, PTREGS_OFF, %o0
- ba,pt %xcc, rtrap
- nop
+ ba,a,pt %xcc, rtrap
.size __spitfire_data_access_exception,.-__spitfire_data_access_exception
.type __spitfire_insn_access_exception_tl1,#function
mov %l5, %o2
call spitfire_insn_access_exception_tl1
add %sp, PTREGS_OFF, %o0
- ba,pt %xcc, rtrap
- nop
+ ba,a,pt %xcc, rtrap
.size __spitfire_insn_access_exception_tl1,.-__spitfire_insn_access_exception_tl1
.type __spitfire_insn_access_exception,#function
mov %l5, %o2
call spitfire_insn_access_exception
add %sp, PTREGS_OFF, %o0
- ba,pt %xcc, rtrap
- nop
+ ba,a,pt %xcc, rtrap
.size __spitfire_insn_access_exception,.-__spitfire_insn_access_exception
/*340*/ .long sys_ni_syscall, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr
/*345*/ .long sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf
/*350*/ .long sys_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen
-/*355*/ .long sys_setsockopt, sys_mlock2, sys_copy_file_range
+/*355*/ .long sys_setsockopt, sys_mlock2, sys_copy_file_range, sys_preadv2, sys_pwritev2
/*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr
.word sys32_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf
/*350*/ .word sys32_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen
- .word compat_sys_setsockopt, sys_mlock2, sys_copy_file_range
+ .word compat_sys_setsockopt, sys_mlock2, sys_copy_file_range, compat_sys_preadv2, compat_sys_pwritev2
#endif /* CONFIG_COMPAT */
/*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr
.word sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf
/*350*/ .word sys64_execveat, sys_membarrier, sys_userfaultfd, sys_bind, sys_listen
- .word sys_setsockopt, sys_mlock2, sys_copy_file_range
+ .word sys_setsockopt, sys_mlock2, sys_copy_file_range, sys_preadv2, sys_pwritev2
mov %l4, %o1
call bad_trap
add %sp, PTREGS_OFF, %o0
- ba,pt %xcc, rtrap
- nop
+ ba,a,pt %xcc, rtrap
invoke_utrap:
sllx %g3, 3, %g3
return NULL;
}
+static int vio_hotplug(struct device *dev, struct kobj_uevent_env *env)
+{
+ const struct vio_dev *vio_dev = to_vio_dev(dev);
+
+ add_uevent_var(env, "MODALIAS=vio:T%sS%s", vio_dev->type, vio_dev->compat);
+ return 0;
+}
+
static int vio_bus_match(struct device *dev, struct device_driver *drv)
{
struct vio_dev *vio_dev = to_vio_dev(dev);
return sprintf(buf, "%s\n", vdev->type);
}
+static ssize_t modalias_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ const struct vio_dev *vdev = to_vio_dev(dev);
+
+ return sprintf(buf, "vio:T%sS%s\n", vdev->type, vdev->compat);
+}
+
static struct device_attribute vio_dev_attrs[] = {
__ATTR_RO(devspec),
__ATTR_RO(type),
+ __ATTR_RO(modalias),
__ATTR_NULL
};
static struct bus_type vio_bus_type = {
.name = "vio",
.dev_attrs = vio_dev_attrs,
+ .uevent = vio_hotplug,
.match = vio_bus_match,
.probe = vio_device_probe,
.remove = vio_device_remove,
jiffies = jiffies_64;
#endif
+#ifdef CONFIG_SPARC64
+ASSERT((swapper_tsb == 0x0000000000408000), "Error: sparc64 early assembler too large")
+#endif
+
SECTIONS
{
#ifdef CONFIG_SPARC64
rd %pc, %g7
call do_sparc64_fault
add %sp, PTREGS_OFF, %o0
- ba,pt %xcc, rtrap
- nop
+ ba,a,pt %xcc, rtrap
/* Be very careful about usage of the trap globals here.
* You cannot touch %g5 as that has the fault information.
max_phys_bits = 47;
break;
case SUN4V_CHIP_SPARC_M7:
+ case SUN4V_CHIP_SPARC_SN:
default:
/* M7 and later support 52-bit virtual addresses. */
sparc64_va_hole_top = 0xfff8000000000000UL;
*/
switch (sun4v_chip_type) {
case SUN4V_CHIP_SPARC_M7:
+ case SUN4V_CHIP_SPARC_SN:
pagecv_flag = 0x00;
break;
default:
*/
switch (sun4v_chip_type) {
case SUN4V_CHIP_SPARC_M7:
+ case SUN4V_CHIP_SPARC_SN:
page_cache4v_flag = _PAGE_CP_4V;
break;
default:
/*
* AMD Performance Monitor K7 and later.
*/
-static const u64 amd_perfmon_event_map[] =
+static const u64 amd_perfmon_event_map[PERF_COUNT_HW_MAX] =
{
[PERF_COUNT_HW_CPU_CYCLES] = 0x0076,
[PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0,
static struct perf_amd_iommu __perf_iommu = {
.pmu = {
+ .task_ctx_nr = perf_invalid_context,
.event_init = perf_iommu_event_init,
.add = perf_iommu_add,
.del = perf_iommu_del,
pr_cont("Knights Landing events, ");
break;
+ case 142: /* 14nm Kabylake Mobile */
+ case 158: /* 14nm Kabylake Desktop */
case 78: /* 14nm Skylake Mobile */
case 94: /* 14nm Skylake Desktop */
+ case 85: /* 14nm Skylake Server */
x86_pmu.late_ack = true;
memcpy(hw_cache_event_ids, skl_hw_cache_event_ids, sizeof(hw_cache_event_ids));
memcpy(hw_cache_extra_regs, skl_hw_cache_extra_regs, sizeof(hw_cache_extra_regs));
#define LBR_PLM (LBR_KERNEL | LBR_USER)
-#define LBR_SEL_MASK 0x1ff /* valid bits in LBR_SELECT */
+#define LBR_SEL_MASK 0x3ff /* valid bits in LBR_SELECT */
#define LBR_NOT_SUPP -1 /* LBR filter not supported */
#define LBR_IGN 0 /* ignored */
* The first 9 bits (LBR_SEL_MASK) in LBR_SELECT operate
* in suppress mode. So LBR_SELECT should be set to
* (~mask & LBR_SEL_MASK) | (mask & ~LBR_SEL_MASK)
+ * But the 10th bit LBR_CALL_STACK does not operate
+ * in suppress mode.
*/
- reg->config = mask ^ x86_pmu.lbr_sel_mask;
+ reg->config = mask ^ (x86_pmu.lbr_sel_mask & ~LBR_CALL_STACK);
if ((br_type & PERF_SAMPLE_BRANCH_NO_CYCLES) &&
(br_type & PERF_SAMPLE_BRANCH_NO_FLAGS) &&
struct dev_ext_attribute *de_attrs;
struct attribute **attrs;
size_t size;
+ u64 reg;
int ret;
long i;
+ if (boot_cpu_has(X86_FEATURE_VMX)) {
+ /*
+ * Intel SDM, 36.5 "Tracing post-VMXON" says that
+ * "IA32_VMX_MISC[bit 14]" being 1 means PT can trace
+ * post-VMXON.
+ */
+ rdmsrl(MSR_IA32_VMX_MISC, reg);
+ if (reg & BIT(14))
+ pt_pmu.vmx = true;
+ }
+
attrs = NULL;
for (i = 0; i < PT_CPUID_LEAVES; i++) {
reg |= (event->attr.config & PT_CONFIG_MASK);
+ event->hw.config = reg;
wrmsrl(MSR_IA32_RTIT_CTL, reg);
}
-static void pt_config_start(bool start)
+static void pt_config_stop(struct perf_event *event)
{
- u64 ctl;
+ u64 ctl = READ_ONCE(event->hw.config);
+
+ /* may be already stopped by a PMI */
+ if (!(ctl & RTIT_CTL_TRACEEN))
+ return;
- rdmsrl(MSR_IA32_RTIT_CTL, ctl);
- if (start)
- ctl |= RTIT_CTL_TRACEEN;
- else
- ctl &= ~RTIT_CTL_TRACEEN;
+ ctl &= ~RTIT_CTL_TRACEEN;
wrmsrl(MSR_IA32_RTIT_CTL, ctl);
+ WRITE_ONCE(event->hw.config, ctl);
+
/*
* A wrmsr that disables trace generation serializes other PT
* registers and causes all data packets to be written to memory,
* The below WMB, separating data store and aux_head store matches
* the consumer's RMB that separates aux_head load and data load.
*/
- if (!start)
- wmb();
+ wmb();
}
static void pt_config_buffer(void *buf, unsigned int topa_idx,
if (!ACCESS_ONCE(pt->handle_nmi))
return;
- pt_config_start(false);
+ /*
+ * If VMX is on and PT does not support it, don't touch anything.
+ */
+ if (READ_ONCE(pt->vmx_on))
+ return;
if (!event)
return;
+ pt_config_stop(event);
+
buf = perf_get_aux(&pt->handle);
if (!buf)
return;
}
}
+void intel_pt_handle_vmx(int on)
+{
+ struct pt *pt = this_cpu_ptr(&pt_ctx);
+ struct perf_event *event;
+ unsigned long flags;
+
+ /* PT plays nice with VMX, do nothing */
+ if (pt_pmu.vmx)
+ return;
+
+ /*
+ * VMXON will clear RTIT_CTL.TraceEn; we need to make
+ * sure to not try to set it while VMX is on. Disable
+ * interrupts to avoid racing with pmu callbacks;
+ * concurrent PMI should be handled fine.
+ */
+ local_irq_save(flags);
+ WRITE_ONCE(pt->vmx_on, on);
+
+ if (on) {
+ /* prevent pt_config_stop() from writing RTIT_CTL */
+ event = pt->handle.event;
+ if (event)
+ event->hw.config = 0;
+ }
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL_GPL(intel_pt_handle_vmx);
+
/*
* PMU callbacks
*/
struct pt *pt = this_cpu_ptr(&pt_ctx);
struct pt_buffer *buf = perf_get_aux(&pt->handle);
+ if (READ_ONCE(pt->vmx_on))
+ return;
+
if (!buf || pt_buffer_is_full(buf, pt)) {
event->hw.state = PERF_HES_STOPPED;
return;
* see comment in intel_pt_interrupt().
*/
ACCESS_ONCE(pt->handle_nmi) = 0;
- pt_config_start(false);
+
+ pt_config_stop(event);
if (event->hw.state == PERF_HES_STOPPED)
return;
struct pt_pmu {
struct pmu pmu;
u32 caps[PT_CPUID_REGS_NUM * PT_CPUID_LEAVES];
+ bool vmx;
};
/**
* struct pt - per-cpu pt context
* @handle: perf output handle
* @handle_nmi: do handle PT PMI on this cpu, there's an active event
+ * @vmx_on: 1 if VMX is ON on this cpu
*/
struct pt {
struct perf_output_handle handle;
int handle_nmi;
+ int vmx_on;
};
#endif /* __INTEL_PT_H__ */
break;
case 60: /* Haswell */
case 69: /* Haswell-Celeron */
+ case 70: /* Haswell GT3e */
case 61: /* Broadwell */
case 71: /* Broadwell-H */
rapl_cntr_mask = RAPL_IDX_HSW;
static inline void perf_check_microcode(void) { }
#endif
+#ifdef CONFIG_CPU_SUP_INTEL
+ extern void intel_pt_handle_vmx(int on);
+#endif
+
#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_AMD)
extern void amd_pmu_enable_virt(void);
extern void amd_pmu_disable_virt(void);
struct irq_desc *desc;
int cpu, vector;
- BUG_ON(!data->cfg.vector);
+ if (!data->cfg.vector)
+ return;
vector = data->cfg.vector;
for_each_cpu_and(cpu, data->domain, cpu_online_mask)
}
pr_info("UV: Found %s hub\n", hub);
- /* We now only need to map the MMRs on UV1 */
- if (is_uv1_hub())
- map_low_mmrs();
+ map_low_mmrs();
m_n_config.v = uv_read_local_mmr(UVH_RH_GAM_CONFIG_MMR );
m_val = m_n_config.s.m_skt;
/* Make changes effective */
wrmsr
- /*
- * And make sure that all the mappings we set up have NX set from
- * the beginning.
- */
- orl $(1 << (_PAGE_BIT_NX - 32)), pa(__supported_pte_mask + 4)
-
enable_paging:
/*
continue;
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
resource_size_t start, end;
+ unsigned long flags;
+
+ flags = pci_resource_flags(dev, i);
+ if (!(flags & IORESOURCE_MEM))
+ continue;
+
+ if (flags & IORESOURCE_UNSET)
+ continue;
+
+ if (pci_resource_len(dev, i) == 0)
+ continue;
start = pci_resource_start(dev, i);
- if (start == 0)
- break;
end = pci_resource_end(dev, i);
if (screen_info.lfb_base >= start &&
screen_info.lfb_base < end) {
found_bar = 1;
+ break;
}
}
}
if (freq_desc_tables[cpu_index].msr_plat) {
rdmsr(MSR_PLATFORM_INFO, lo, hi);
- ratio = (lo >> 8) & 0x1f;
+ ratio = (lo >> 8) & 0xff;
} else {
rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
ratio = (hi >> 8) & 0x1f;
*/
if (!is_error_noslot_pfn(pfn) && !kvm_is_reserved_pfn(pfn) &&
level == PT_PAGE_TABLE_LEVEL &&
- PageTransCompound(pfn_to_page(pfn)) &&
+ PageTransCompoundMap(pfn_to_page(pfn)) &&
!mmu_gfn_lpage_is_disallowed(vcpu, gfn, PT_DIRECTORY_LEVEL)) {
unsigned long mask;
/*
*/
if (sp->role.direct &&
!kvm_is_reserved_pfn(pfn) &&
- PageTransCompound(pfn_to_page(pfn))) {
+ PageTransCompoundMap(pfn_to_page(pfn))) {
drop_spte(kvm, sptep);
need_tlb_flush = 1;
goto restart;
static void kvm_cpu_vmxon(u64 addr)
{
+ intel_pt_handle_vmx(1);
+
asm volatile (ASM_VMX_VMXON_RAX
: : "a"(&addr), "m"(addr)
: "memory", "cc");
static void kvm_cpu_vmxoff(void)
{
asm volatile (__ex(ASM_VMX_VMXOFF) : : : "cc");
+
+ intel_pt_handle_vmx(0);
}
static void hardware_disable(void)
void x86_configure_nx(void)
{
- /* If disable_nx is set, clear NX on all new mappings going forward. */
- if (disable_nx)
+ if (boot_cpu_has(X86_FEATURE_NX) && !disable_nx)
+ __supported_pte_mask |= _PAGE_NX;
+ else
__supported_pte_mask &= ~_PAGE_NX;
}
return;
if (bgrt_tab->header.length < sizeof(*bgrt_tab)) {
- pr_err("Ignoring BGRT: invalid length %u (expected %zu)\n",
+ pr_notice("Ignoring BGRT: invalid length %u (expected %zu)\n",
bgrt_tab->header.length, sizeof(*bgrt_tab));
return;
}
if (bgrt_tab->version != 1) {
- pr_err("Ignoring BGRT: invalid version %u (expected 1)\n",
+ pr_notice("Ignoring BGRT: invalid version %u (expected 1)\n",
bgrt_tab->version);
return;
}
if (bgrt_tab->status & 0xfe) {
- pr_err("Ignoring BGRT: reserved status bits are non-zero %u\n",
+ pr_notice("Ignoring BGRT: reserved status bits are non-zero %u\n",
bgrt_tab->status);
return;
}
if (bgrt_tab->image_type != 0) {
- pr_err("Ignoring BGRT: invalid image type %u (expected 0)\n",
+ pr_notice("Ignoring BGRT: invalid image type %u (expected 0)\n",
bgrt_tab->image_type);
return;
}
if (!bgrt_tab->image_address) {
- pr_err("Ignoring BGRT: null image address\n");
+ pr_notice("Ignoring BGRT: null image address\n");
return;
}
image = memremap(bgrt_tab->image_address, sizeof(bmp_header), MEMREMAP_WB);
if (!image) {
- pr_err("Ignoring BGRT: failed to map image header memory\n");
+ pr_notice("Ignoring BGRT: failed to map image header memory\n");
return;
}
memcpy(&bmp_header, image, sizeof(bmp_header));
memunmap(image);
if (bmp_header.id != 0x4d42) {
- pr_err("Ignoring BGRT: Incorrect BMP magic number 0x%x (expected 0x4d42)\n",
+ pr_notice("Ignoring BGRT: Incorrect BMP magic number 0x%x (expected 0x4d42)\n",
bmp_header.id);
return;
}
bgrt_image = kmalloc(bgrt_image_size, GFP_KERNEL | __GFP_NOWARN);
if (!bgrt_image) {
- pr_err("Ignoring BGRT: failed to allocate memory for image (wanted %zu bytes)\n",
+ pr_notice("Ignoring BGRT: failed to allocate memory for image (wanted %zu bytes)\n",
bgrt_image_size);
return;
}
image = memremap(bgrt_tab->image_address, bmp_header.size, MEMREMAP_WB);
if (!image) {
- pr_err("Ignoring BGRT: failed to map image memory\n");
+ pr_notice("Ignoring BGRT: failed to map image memory\n");
kfree(bgrt_image);
bgrt_image = NULL;
return;
static void xen_qlock_kick(int cpu)
{
+ int irq = per_cpu(lock_kicker_irq, cpu);
+
+ /* Don't kick if the target's kicker interrupt is not initialized. */
+ if (irq == -1)
+ return;
+
xen_send_IPI_one(cpu, XEN_SPIN_UNLOCK_VECTOR);
}
obj_desc->method.mutex->mutex.
original_sync_level =
obj_desc->method.mutex->mutex.sync_level;
+
+ obj_desc->method.mutex->mutex.thread_id =
+ acpi_os_get_thread_id();
}
}
offset);
rc = -ENXIO;
}
- } else
+ } else {
rc = 0;
+ if (cmd_rc)
+ *cmd_rc = xlat_status(buf, cmd);
+ }
out:
ACPI_FREE(out_obj);
If unsure, say N.
+config SATA_AHCI_SEATTLE
+ tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
+ depends on ARCH_SEATTLE
+ help
+ This option enables support for AMD Seattle SATA host controller.
+
+ If unsure, say N
+
config SATA_INIC162X
tristate "Initio 162x SATA support (Very Experimental)"
depends on PCI
# non-SFF interface
obj-$(CONFIG_SATA_AHCI) += ahci.o libahci.o
obj-$(CONFIG_SATA_ACARD_AHCI) += acard-ahci.o libahci.o
+obj-$(CONFIG_SATA_AHCI_SEATTLE) += ahci_seattle.o libahci.o libahci_platform.o
obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o libahci_platform.o
obj-$(CONFIG_SATA_FSL) += sata_fsl.o
obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
if (rc)
return rc;
+ of_property_read_u32(dev->of_node,
+ "ports-implemented", &hpriv->force_port_map);
+
if (of_device_is_compatible(dev->of_node, "hisilicon,hisi-ahci"))
hpriv->flags |= AHCI_HFLAG_NO_FBS | AHCI_HFLAG_NO_NCQ;
--- /dev/null
+/*
+ * AMD Seattle AHCI SATA driver
+ *
+ * Copyright (c) 2015, Advanced Micro Devices
+ * Author: Brijesh Singh <brijesh.singh@amd.com>
+ *
+ * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/device.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/libata.h>
+#include <linux/ahci_platform.h>
+#include <linux/acpi.h>
+#include <linux/pci_ids.h>
+#include "ahci.h"
+
+/* SGPIO Control Register definition
+ *
+ * Bit Type Description
+ * 31 RW OD7.2 (activity)
+ * 30 RW OD7.1 (locate)
+ * 29 RW OD7.0 (fault)
+ * 28...8 RW OD6.2...OD0.0 (3bits per port, 1 bit per LED)
+ * 7 RO SGPIO feature flag
+ * 6:4 RO Reserved
+ * 3:0 RO Number of ports (0 means no port supported)
+ */
+#define ACTIVITY_BIT_POS(x) (8 + (3 * x))
+#define LOCATE_BIT_POS(x) (ACTIVITY_BIT_POS(x) + 1)
+#define FAULT_BIT_POS(x) (LOCATE_BIT_POS(x) + 1)
+
+#define ACTIVITY_MASK 0x00010000
+#define LOCATE_MASK 0x00080000
+#define FAULT_MASK 0x00400000
+
+#define DRV_NAME "ahci-seattle"
+
+static ssize_t seattle_transmit_led_message(struct ata_port *ap, u32 state,
+ ssize_t size);
+
+struct seattle_plat_data {
+ void __iomem *sgpio_ctrl;
+};
+
+static struct ata_port_operations ahci_port_ops = {
+ .inherits = &ahci_ops,
+};
+
+static const struct ata_port_info ahci_port_info = {
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_port_ops,
+};
+
+static struct ata_port_operations ahci_seattle_ops = {
+ .inherits = &ahci_ops,
+ .transmit_led_message = seattle_transmit_led_message,
+};
+
+static const struct ata_port_info ahci_port_seattle_info = {
+ .flags = AHCI_FLAG_COMMON | ATA_FLAG_EM | ATA_FLAG_SW_ACTIVITY,
+ .link_flags = ATA_LFLAG_SW_ACTIVITY,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_seattle_ops,
+};
+
+static struct scsi_host_template ahci_platform_sht = {
+ AHCI_SHT(DRV_NAME),
+};
+
+static ssize_t seattle_transmit_led_message(struct ata_port *ap, u32 state,
+ ssize_t size)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct seattle_plat_data *plat_data = hpriv->plat_data;
+ unsigned long flags;
+ int pmp;
+ struct ahci_em_priv *emp;
+ u32 val;
+
+ /* get the slot number from the message */
+ pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
+ if (pmp >= EM_MAX_SLOTS)
+ return -EINVAL;
+ emp = &pp->em_priv[pmp];
+
+ val = ioread32(plat_data->sgpio_ctrl);
+ if (state & ACTIVITY_MASK)
+ val |= 1 << ACTIVITY_BIT_POS((ap->port_no));
+ else
+ val &= ~(1 << ACTIVITY_BIT_POS((ap->port_no)));
+
+ if (state & LOCATE_MASK)
+ val |= 1 << LOCATE_BIT_POS((ap->port_no));
+ else
+ val &= ~(1 << LOCATE_BIT_POS((ap->port_no)));
+
+ if (state & FAULT_MASK)
+ val |= 1 << FAULT_BIT_POS((ap->port_no));
+ else
+ val &= ~(1 << FAULT_BIT_POS((ap->port_no)));
+
+ iowrite32(val, plat_data->sgpio_ctrl);
+
+ spin_lock_irqsave(ap->lock, flags);
+
+ /* save off new led state for port/slot */
+ emp->led_state = state;
+
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ return size;
+}
+
+static const struct ata_port_info *ahci_seattle_get_port_info(
+ struct platform_device *pdev, struct ahci_host_priv *hpriv)
+{
+ struct device *dev = &pdev->dev;
+ struct seattle_plat_data *plat_data;
+ u32 val;
+
+ plat_data = devm_kzalloc(dev, sizeof(*plat_data), GFP_KERNEL);
+ if (IS_ERR(plat_data))
+ return &ahci_port_info;
+
+ plat_data->sgpio_ctrl = devm_ioremap_resource(dev,
+ platform_get_resource(pdev, IORESOURCE_MEM, 1));
+ if (IS_ERR(plat_data->sgpio_ctrl))
+ return &ahci_port_info;
+
+ val = ioread32(plat_data->sgpio_ctrl);
+
+ if (!(val & 0xf))
+ return &ahci_port_info;
+
+ hpriv->em_loc = 0;
+ hpriv->em_buf_sz = 4;
+ hpriv->em_msg_type = EM_MSG_TYPE_LED;
+ hpriv->plat_data = plat_data;
+
+ dev_info(dev, "SGPIO LED control is enabled.\n");
+ return &ahci_port_seattle_info;
+}
+
+static int ahci_seattle_probe(struct platform_device *pdev)
+{
+ int rc;
+ struct ahci_host_priv *hpriv;
+
+ hpriv = ahci_platform_get_resources(pdev);
+ if (IS_ERR(hpriv))
+ return PTR_ERR(hpriv);
+
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
+
+ rc = ahci_platform_init_host(pdev, hpriv,
+ ahci_seattle_get_port_info(pdev, hpriv),
+ &ahci_platform_sht);
+ if (rc)
+ goto disable_resources;
+
+ return 0;
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
+ return rc;
+}
+
+static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend,
+ ahci_platform_resume);
+
+static const struct acpi_device_id ahci_acpi_match[] = {
+ { "AMDI0600", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, ahci_acpi_match);
+
+static struct platform_driver ahci_seattle_driver = {
+ .probe = ahci_seattle_probe,
+ .remove = ata_platform_remove_one,
+ .driver = {
+ .name = DRV_NAME,
+ .acpi_match_table = ahci_acpi_match,
+ .pm = &ahci_pm_ops,
+ },
+};
+module_platform_driver(ahci_seattle_driver);
+
+MODULE_DESCRIPTION("Seattle AHCI SATA platform driver");
+MODULE_AUTHOR("Brijesh Singh <brijesh.singh@amd.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
dev_info(dev, "forcing port_map 0x%x -> 0x%x\n",
port_map, hpriv->force_port_map);
port_map = hpriv->force_port_map;
+ hpriv->saved_port_map = port_map;
}
if (hpriv->mask_port_map) {
count = of_count_phandle_with_args(dev->of_node, "clocks",
"#clock-cells");
- if (count == 0)
+ if (count <= 0)
return -ENODEV;
clks = kcalloc(count, sizeof(*clks), GFP_KERNEL);
return ret;
}
-static int genpd_save_dev(struct generic_pm_domain *genpd, struct device *dev)
-{
- return GENPD_DEV_CALLBACK(genpd, int, save_state, dev);
-}
-
-static int genpd_restore_dev(struct generic_pm_domain *genpd,
- struct device *dev)
-{
- return GENPD_DEV_CALLBACK(genpd, int, restore_state, dev);
-}
-
static int genpd_dev_pm_qos_notifier(struct notifier_block *nb,
unsigned long val, void *ptr)
{
}
/**
- * pm_genpd_runtime_suspend - Suspend a device belonging to I/O PM domain.
+ * __genpd_runtime_suspend - walk the hierarchy of ->runtime_suspend() callbacks
+ * @dev: Device to handle.
+ */
+static int __genpd_runtime_suspend(struct device *dev)
+{
+ int (*cb)(struct device *__dev);
+
+ if (dev->type && dev->type->pm)
+ cb = dev->type->pm->runtime_suspend;
+ else if (dev->class && dev->class->pm)
+ cb = dev->class->pm->runtime_suspend;
+ else if (dev->bus && dev->bus->pm)
+ cb = dev->bus->pm->runtime_suspend;
+ else
+ cb = NULL;
+
+ if (!cb && dev->driver && dev->driver->pm)
+ cb = dev->driver->pm->runtime_suspend;
+
+ return cb ? cb(dev) : 0;
+}
+
+/**
+ * __genpd_runtime_resume - walk the hierarchy of ->runtime_resume() callbacks
+ * @dev: Device to handle.
+ */
+static int __genpd_runtime_resume(struct device *dev)
+{
+ int (*cb)(struct device *__dev);
+
+ if (dev->type && dev->type->pm)
+ cb = dev->type->pm->runtime_resume;
+ else if (dev->class && dev->class->pm)
+ cb = dev->class->pm->runtime_resume;
+ else if (dev->bus && dev->bus->pm)
+ cb = dev->bus->pm->runtime_resume;
+ else
+ cb = NULL;
+
+ if (!cb && dev->driver && dev->driver->pm)
+ cb = dev->driver->pm->runtime_resume;
+
+ return cb ? cb(dev) : 0;
+}
+
+/**
+ * genpd_runtime_suspend - Suspend a device belonging to I/O PM domain.
* @dev: Device to suspend.
*
* Carry out a runtime suspend of a device under the assumption that its
* pm_domain field points to the domain member of an object of type
* struct generic_pm_domain representing a PM domain consisting of I/O devices.
*/
-static int pm_genpd_runtime_suspend(struct device *dev)
+static int genpd_runtime_suspend(struct device *dev)
{
struct generic_pm_domain *genpd;
- bool (*stop_ok)(struct device *__dev);
+ bool (*suspend_ok)(struct device *__dev);
struct gpd_timing_data *td = &dev_gpd_data(dev)->td;
bool runtime_pm = pm_runtime_enabled(dev);
ktime_t time_start;
* runtime PM is disabled. Under these circumstances, we shall skip
* validating/measuring the PM QoS latency.
*/
- stop_ok = genpd->gov ? genpd->gov->stop_ok : NULL;
- if (runtime_pm && stop_ok && !stop_ok(dev))
+ suspend_ok = genpd->gov ? genpd->gov->suspend_ok : NULL;
+ if (runtime_pm && suspend_ok && !suspend_ok(dev))
return -EBUSY;
/* Measure suspend latency. */
if (runtime_pm)
time_start = ktime_get();
- ret = genpd_save_dev(genpd, dev);
+ ret = __genpd_runtime_suspend(dev);
if (ret)
return ret;
ret = genpd_stop_dev(genpd, dev);
if (ret) {
- genpd_restore_dev(genpd, dev);
+ __genpd_runtime_resume(dev);
return ret;
}
}
/**
- * pm_genpd_runtime_resume - Resume a device belonging to I/O PM domain.
+ * genpd_runtime_resume - Resume a device belonging to I/O PM domain.
* @dev: Device to resume.
*
* Carry out a runtime resume of a device under the assumption that its
* pm_domain field points to the domain member of an object of type
* struct generic_pm_domain representing a PM domain consisting of I/O devices.
*/
-static int pm_genpd_runtime_resume(struct device *dev)
+static int genpd_runtime_resume(struct device *dev)
{
struct generic_pm_domain *genpd;
struct gpd_timing_data *td = &dev_gpd_data(dev)->td;
if (ret)
goto err_poweroff;
- ret = genpd_restore_dev(genpd, dev);
+ ret = __genpd_runtime_resume(dev);
if (ret)
goto err_stop;
* at this point and a system wakeup event should be reported if it's
* set up to wake up the system from sleep states.
*/
- pm_runtime_get_noresume(dev);
- if (pm_runtime_barrier(dev) && device_may_wakeup(dev))
- pm_wakeup_event(dev, 0);
-
- if (pm_wakeup_pending()) {
- pm_runtime_put(dev);
- return -EBUSY;
- }
-
if (resume_needed(dev, genpd))
pm_runtime_resume(dev);
mutex_unlock(&genpd->lock);
- if (genpd->suspend_power_off) {
- pm_runtime_put_noidle(dev);
+ if (genpd->suspend_power_off)
return 0;
- }
/*
* The PM domain must be in the GPD_STATE_ACTIVE state at this point,
pm_runtime_enable(dev);
}
- pm_runtime_put(dev);
return ret;
}
}
EXPORT_SYMBOL_GPL(pm_genpd_remove_subdomain);
-/* Default device callbacks for generic PM domains. */
-
-/**
- * pm_genpd_default_save_state - Default "save device state" for PM domains.
- * @dev: Device to handle.
- */
-static int pm_genpd_default_save_state(struct device *dev)
-{
- int (*cb)(struct device *__dev);
-
- if (dev->type && dev->type->pm)
- cb = dev->type->pm->runtime_suspend;
- else if (dev->class && dev->class->pm)
- cb = dev->class->pm->runtime_suspend;
- else if (dev->bus && dev->bus->pm)
- cb = dev->bus->pm->runtime_suspend;
- else
- cb = NULL;
-
- if (!cb && dev->driver && dev->driver->pm)
- cb = dev->driver->pm->runtime_suspend;
-
- return cb ? cb(dev) : 0;
-}
-
-/**
- * pm_genpd_default_restore_state - Default PM domains "restore device state".
- * @dev: Device to handle.
- */
-static int pm_genpd_default_restore_state(struct device *dev)
-{
- int (*cb)(struct device *__dev);
-
- if (dev->type && dev->type->pm)
- cb = dev->type->pm->runtime_resume;
- else if (dev->class && dev->class->pm)
- cb = dev->class->pm->runtime_resume;
- else if (dev->bus && dev->bus->pm)
- cb = dev->bus->pm->runtime_resume;
- else
- cb = NULL;
-
- if (!cb && dev->driver && dev->driver->pm)
- cb = dev->driver->pm->runtime_resume;
-
- return cb ? cb(dev) : 0;
-}
-
/**
* pm_genpd_init - Initialize a generic I/O PM domain object.
* @genpd: PM domain object to initialize.
genpd->device_count = 0;
genpd->max_off_time_ns = -1;
genpd->max_off_time_changed = true;
- genpd->domain.ops.runtime_suspend = pm_genpd_runtime_suspend;
- genpd->domain.ops.runtime_resume = pm_genpd_runtime_resume;
+ genpd->domain.ops.runtime_suspend = genpd_runtime_suspend;
+ genpd->domain.ops.runtime_resume = genpd_runtime_resume;
genpd->domain.ops.prepare = pm_genpd_prepare;
genpd->domain.ops.suspend = pm_genpd_suspend;
genpd->domain.ops.suspend_late = pm_genpd_suspend_late;
genpd->domain.ops.restore_early = pm_genpd_resume_early;
genpd->domain.ops.restore = pm_genpd_resume;
genpd->domain.ops.complete = pm_genpd_complete;
- genpd->dev_ops.save_state = pm_genpd_default_save_state;
- genpd->dev_ops.restore_state = pm_genpd_default_restore_state;
if (genpd->flags & GENPD_FLAG_PM_CLK) {
genpd->dev_ops.stop = pm_clk_suspend;
}
/**
- * default_stop_ok - Default PM domain governor routine for stopping devices.
+ * default_suspend_ok - Default PM domain governor routine to suspend devices.
* @dev: Device to check.
*/
-static bool default_stop_ok(struct device *dev)
+static bool default_suspend_ok(struct device *dev)
{
struct gpd_timing_data *td = &dev_gpd_data(dev)->td;
unsigned long flags;
spin_lock_irqsave(&dev->power.lock, flags);
if (!td->constraint_changed) {
- bool ret = td->cached_stop_ok;
+ bool ret = td->cached_suspend_ok;
spin_unlock_irqrestore(&dev->power.lock, flags);
return ret;
}
td->constraint_changed = false;
- td->cached_stop_ok = false;
+ td->cached_suspend_ok = false;
td->effective_constraint_ns = -1;
constraint_ns = __dev_pm_qos_read_value(dev);
return false;
}
td->effective_constraint_ns = constraint_ns;
- td->cached_stop_ok = constraint_ns >= 0;
+ td->cached_suspend_ok = constraint_ns >= 0;
/*
* The children have been suspended already, so we don't need to take
- * their stop latencies into account here.
+ * their suspend latencies into account here.
*/
- return td->cached_stop_ok;
+ return td->cached_suspend_ok;
}
/**
*/
td = &to_gpd_data(pdd)->td;
constraint_ns = td->effective_constraint_ns;
- /* default_stop_ok() need not be called before us. */
+ /* default_suspend_ok() need not be called before us. */
if (constraint_ns < 0) {
constraint_ns = dev_pm_qos_read_value(pdd->dev);
constraint_ns *= NSEC_PER_USEC;
}
struct dev_power_governor simple_qos_governor = {
- .stop_ok = default_stop_ok,
+ .suspend_ok = default_suspend_ok,
.power_down_ok = default_power_down_ok,
};
*/
struct dev_power_governor pm_domain_always_on_gov = {
.power_down_ok = always_on_power_down_ok,
- .stop_ok = default_stop_ok,
+ .suspend_ok = default_suspend_ok,
};
static int device_prepare(struct device *dev, pm_message_t state)
{
int (*callback)(struct device *) = NULL;
- char *info = NULL;
int ret = 0;
if (dev->power.syscore)
goto unlock;
}
- if (dev->pm_domain) {
- info = "preparing power domain ";
+ if (dev->pm_domain)
callback = dev->pm_domain->ops.prepare;
- } else if (dev->type && dev->type->pm) {
- info = "preparing type ";
+ else if (dev->type && dev->type->pm)
callback = dev->type->pm->prepare;
- } else if (dev->class && dev->class->pm) {
- info = "preparing class ";
+ else if (dev->class && dev->class->pm)
callback = dev->class->pm->prepare;
- } else if (dev->bus && dev->bus->pm) {
- info = "preparing bus ";
+ else if (dev->bus && dev->bus->pm)
callback = dev->bus->pm->prepare;
- }
- if (!callback && dev->driver && dev->driver->pm) {
- info = "preparing driver ";
+ if (!callback && dev->driver && dev->driver->pm)
callback = dev->driver->pm->prepare;
- }
if (callback)
ret = callback(dev);
ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
obj-y += core.o cpu.o
+obj-$(CONFIG_OF) += of.o
obj-$(CONFIG_DEBUG_FS) += debugfs.o
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/device.h>
-#include <linux/of.h>
#include <linux/export.h>
#include <linux/regulator/consumer.h>
* from here, with each opp_table containing the list of opps it supports in
* various states of availability.
*/
-static LIST_HEAD(opp_tables);
+LIST_HEAD(opp_tables);
/* Lock to allow exclusive modification to the device and opp lists */
DEFINE_MUTEX(opp_table_lock);
return NULL;
}
-static struct opp_table *_managed_opp(const struct device_node *np)
-{
- struct opp_table *opp_table;
-
- list_for_each_entry_rcu(opp_table, &opp_tables, node) {
- if (opp_table->np == np) {
- /*
- * Multiple devices can point to the same OPP table and
- * so will have same node-pointer, np.
- *
- * But the OPPs will be considered as shared only if the
- * OPP table contains a "opp-shared" property.
- */
- return opp_table->shared_opp ? opp_table : NULL;
- }
- }
-
- return NULL;
-}
-
/**
* _find_opp_table() - find opp_table struct using device pointer
* @dev: device pointer used to lookup OPP table
reg = opp_table->regulator;
if (IS_ERR(reg)) {
/* Regulator may not be required for device */
- if (reg)
- dev_err(dev, "%s: Invalid regulator (%ld)\n", __func__,
- PTR_ERR(reg));
rcu_read_unlock();
return 0;
}
{
struct opp_table *opp_table;
struct opp_device *opp_dev;
- struct device_node *np;
int ret;
/* Check for existing table for 'dev' first */
return NULL;
}
- /*
- * Only required for backward compatibility with v1 bindings, but isn't
- * harmful for other cases. And so we do it unconditionally.
- */
- np = of_node_get(dev->of_node);
- if (np) {
- u32 val;
-
- if (!of_property_read_u32(np, "clock-latency", &val))
- opp_table->clock_latency_ns_max = val;
- of_property_read_u32(np, "voltage-tolerance",
- &opp_table->voltage_tolerance_v1);
- of_node_put(np);
- }
+ _of_init_opp_table(opp_table, dev);
/* Set regulator to a non-NULL error value */
opp_table->regulator = ERR_PTR(-ENXIO);
* It is assumed that the caller holds required mutex for an RCU updater
* strategy.
*/
-static void _opp_remove(struct opp_table *opp_table,
- struct dev_pm_opp *opp, bool notify)
+void _opp_remove(struct opp_table *opp_table, struct dev_pm_opp *opp,
+ bool notify)
{
/*
* Notify the changes in the availability of the operable
}
EXPORT_SYMBOL_GPL(dev_pm_opp_remove);
-static struct dev_pm_opp *_allocate_opp(struct device *dev,
- struct opp_table **opp_table)
+struct dev_pm_opp *_allocate_opp(struct device *dev,
+ struct opp_table **opp_table)
{
struct dev_pm_opp *opp;
return true;
}
-static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
- struct opp_table *opp_table)
+int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
+ struct opp_table *opp_table)
{
struct dev_pm_opp *opp;
struct list_head *head = &opp_table->opp_list;
* Duplicate OPPs (both freq and volt are same) and !opp->available
* -ENOMEM Memory allocation failure
*/
-static int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt,
- bool dynamic)
+int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt,
+ bool dynamic)
{
struct opp_table *opp_table;
struct dev_pm_opp *new_opp;
return ret;
}
-/* TODO: Support multiple regulators */
-static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
- struct opp_table *opp_table)
-{
- u32 microvolt[3] = {0};
- u32 val;
- int count, ret;
- struct property *prop = NULL;
- char name[NAME_MAX];
-
- /* Search for "opp-microvolt-<name>" */
- if (opp_table->prop_name) {
- snprintf(name, sizeof(name), "opp-microvolt-%s",
- opp_table->prop_name);
- prop = of_find_property(opp->np, name, NULL);
- }
-
- if (!prop) {
- /* Search for "opp-microvolt" */
- sprintf(name, "opp-microvolt");
- prop = of_find_property(opp->np, name, NULL);
-
- /* Missing property isn't a problem, but an invalid entry is */
- if (!prop)
- return 0;
- }
-
- count = of_property_count_u32_elems(opp->np, name);
- if (count < 0) {
- dev_err(dev, "%s: Invalid %s property (%d)\n",
- __func__, name, count);
- return count;
- }
-
- /* There can be one or three elements here */
- if (count != 1 && count != 3) {
- dev_err(dev, "%s: Invalid number of elements in %s property (%d)\n",
- __func__, name, count);
- return -EINVAL;
- }
-
- ret = of_property_read_u32_array(opp->np, name, microvolt, count);
- if (ret) {
- dev_err(dev, "%s: error parsing %s: %d\n", __func__, name, ret);
- return -EINVAL;
- }
-
- opp->u_volt = microvolt[0];
-
- if (count == 1) {
- opp->u_volt_min = opp->u_volt;
- opp->u_volt_max = opp->u_volt;
- } else {
- opp->u_volt_min = microvolt[1];
- opp->u_volt_max = microvolt[2];
- }
-
- /* Search for "opp-microamp-<name>" */
- prop = NULL;
- if (opp_table->prop_name) {
- snprintf(name, sizeof(name), "opp-microamp-%s",
- opp_table->prop_name);
- prop = of_find_property(opp->np, name, NULL);
- }
-
- if (!prop) {
- /* Search for "opp-microamp" */
- sprintf(name, "opp-microamp");
- prop = of_find_property(opp->np, name, NULL);
- }
-
- if (prop && !of_property_read_u32(opp->np, name, &val))
- opp->u_amp = val;
-
- return 0;
-}
-
/**
* dev_pm_opp_set_supported_hw() - Set supported platforms
* @dev: Device for which supported-hw has to be set.
}
EXPORT_SYMBOL_GPL(dev_pm_opp_put_regulator);
-static bool _opp_is_supported(struct device *dev, struct opp_table *opp_table,
- struct device_node *np)
-{
- unsigned int count = opp_table->supported_hw_count;
- u32 version;
- int ret;
-
- if (!opp_table->supported_hw)
- return true;
-
- while (count--) {
- ret = of_property_read_u32_index(np, "opp-supported-hw", count,
- &version);
- if (ret) {
- dev_warn(dev, "%s: failed to read opp-supported-hw property at index %d: %d\n",
- __func__, count, ret);
- return false;
- }
-
- /* Both of these are bitwise masks of the versions */
- if (!(version & opp_table->supported_hw[count]))
- return false;
- }
-
- return true;
-}
-
-/**
- * _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings)
- * @dev: device for which we do this operation
- * @np: device node
- *
- * This function adds an opp definition to the opp table and returns status. The
- * opp can be controlled using dev_pm_opp_enable/disable functions and may be
- * removed by dev_pm_opp_remove.
- *
- * Locking: The internal opp_table and opp structures are RCU protected.
- * Hence this function internally uses RCU updater strategy with mutex locks
- * to keep the integrity of the internal data structures. Callers should ensure
- * that this function is *NOT* called under RCU protection or in contexts where
- * mutex cannot be locked.
- *
- * Return:
- * 0 On success OR
- * Duplicate OPPs (both freq and volt are same) and opp->available
- * -EEXIST Freq are same and volt are different OR
- * Duplicate OPPs (both freq and volt are same) and !opp->available
- * -ENOMEM Memory allocation failure
- * -EINVAL Failed parsing the OPP node
- */
-static int _opp_add_static_v2(struct device *dev, struct device_node *np)
-{
- struct opp_table *opp_table;
- struct dev_pm_opp *new_opp;
- u64 rate;
- u32 val;
- int ret;
-
- /* Hold our table modification lock here */
- mutex_lock(&opp_table_lock);
-
- new_opp = _allocate_opp(dev, &opp_table);
- if (!new_opp) {
- ret = -ENOMEM;
- goto unlock;
- }
-
- ret = of_property_read_u64(np, "opp-hz", &rate);
- if (ret < 0) {
- dev_err(dev, "%s: opp-hz not found\n", __func__);
- goto free_opp;
- }
-
- /* Check if the OPP supports hardware's hierarchy of versions or not */
- if (!_opp_is_supported(dev, opp_table, np)) {
- dev_dbg(dev, "OPP not supported by hardware: %llu\n", rate);
- goto free_opp;
- }
-
- /*
- * Rate is defined as an unsigned long in clk API, and so casting
- * explicitly to its type. Must be fixed once rate is 64 bit
- * guaranteed in clk API.
- */
- new_opp->rate = (unsigned long)rate;
- new_opp->turbo = of_property_read_bool(np, "turbo-mode");
-
- new_opp->np = np;
- new_opp->dynamic = false;
- new_opp->available = true;
-
- if (!of_property_read_u32(np, "clock-latency-ns", &val))
- new_opp->clock_latency_ns = val;
-
- ret = opp_parse_supplies(new_opp, dev, opp_table);
- if (ret)
- goto free_opp;
-
- ret = _opp_add(dev, new_opp, opp_table);
- if (ret)
- goto free_opp;
-
- /* OPP to select on device suspend */
- if (of_property_read_bool(np, "opp-suspend")) {
- if (opp_table->suspend_opp) {
- dev_warn(dev, "%s: Multiple suspend OPPs found (%lu %lu)\n",
- __func__, opp_table->suspend_opp->rate,
- new_opp->rate);
- } else {
- new_opp->suspend = true;
- opp_table->suspend_opp = new_opp;
- }
- }
-
- if (new_opp->clock_latency_ns > opp_table->clock_latency_ns_max)
- opp_table->clock_latency_ns_max = new_opp->clock_latency_ns;
-
- mutex_unlock(&opp_table_lock);
-
- pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu latency:%lu\n",
- __func__, new_opp->turbo, new_opp->rate, new_opp->u_volt,
- new_opp->u_volt_min, new_opp->u_volt_max,
- new_opp->clock_latency_ns);
-
- /*
- * Notify the changes in the availability of the operable
- * frequency/voltage list.
- */
- srcu_notifier_call_chain(&opp_table->srcu_head, OPP_EVENT_ADD, new_opp);
- return 0;
-
-free_opp:
- _opp_remove(opp_table, new_opp, false);
-unlock:
- mutex_unlock(&opp_table_lock);
- return ret;
-}
-
/**
* dev_pm_opp_add() - Add an OPP table from a table definitions
* @dev: device for which we do this operation
}
EXPORT_SYMBOL_GPL(dev_pm_opp_get_notifier);
-#ifdef CONFIG_OF
-/**
- * dev_pm_opp_of_remove_table() - Free OPP table entries created from static DT
- * entries
- * @dev: device pointer used to lookup OPP table.
- *
- * Free OPPs created using static entries present in DT.
- *
- * Locking: The internal opp_table and opp structures are RCU protected.
- * Hence this function indirectly uses RCU updater strategy with mutex locks
- * to keep the integrity of the internal data structures. Callers should ensure
- * that this function is *NOT* called under RCU protection or in contexts where
- * mutex cannot be locked.
+/*
+ * Free OPPs either created using static entries present in DT or even the
+ * dynamically added entries based on remove_all param.
*/
-void dev_pm_opp_of_remove_table(struct device *dev)
+void _dev_pm_opp_remove_table(struct device *dev, bool remove_all)
{
struct opp_table *opp_table;
struct dev_pm_opp *opp, *tmp;
if (list_is_singular(&opp_table->dev_list)) {
/* Free static OPPs */
list_for_each_entry_safe(opp, tmp, &opp_table->opp_list, node) {
- if (!opp->dynamic)
+ if (remove_all || !opp->dynamic)
_opp_remove(opp_table, opp, true);
}
} else {
unlock:
mutex_unlock(&opp_table_lock);
}
-EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);
-
-/* Returns opp descriptor node for a device, caller must do of_node_put() */
-struct device_node *_of_get_opp_desc_node(struct device *dev)
-{
- /*
- * TODO: Support for multiple OPP tables.
- *
- * There should be only ONE phandle present in "operating-points-v2"
- * property.
- */
-
- return of_parse_phandle(dev->of_node, "operating-points-v2", 0);
-}
-
-/* Initializes OPP tables based on new bindings */
-static int _of_add_opp_table_v2(struct device *dev, struct device_node *opp_np)
-{
- struct device_node *np;
- struct opp_table *opp_table;
- int ret = 0, count = 0;
-
- mutex_lock(&opp_table_lock);
-
- opp_table = _managed_opp(opp_np);
- if (opp_table) {
- /* OPPs are already managed */
- if (!_add_opp_dev(dev, opp_table))
- ret = -ENOMEM;
- mutex_unlock(&opp_table_lock);
- return ret;
- }
- mutex_unlock(&opp_table_lock);
-
- /* We have opp-table node now, iterate over it and add OPPs */
- for_each_available_child_of_node(opp_np, np) {
- count++;
-
- ret = _opp_add_static_v2(dev, np);
- if (ret) {
- dev_err(dev, "%s: Failed to add OPP, %d\n", __func__,
- ret);
- goto free_table;
- }
- }
-
- /* There should be one of more OPP defined */
- if (WARN_ON(!count))
- return -ENOENT;
-
- mutex_lock(&opp_table_lock);
-
- opp_table = _find_opp_table(dev);
- if (WARN_ON(IS_ERR(opp_table))) {
- ret = PTR_ERR(opp_table);
- mutex_unlock(&opp_table_lock);
- goto free_table;
- }
-
- opp_table->np = opp_np;
- opp_table->shared_opp = of_property_read_bool(opp_np, "opp-shared");
-
- mutex_unlock(&opp_table_lock);
-
- return 0;
-
-free_table:
- dev_pm_opp_of_remove_table(dev);
-
- return ret;
-}
-
-/* Initializes OPP tables based on old-deprecated bindings */
-static int _of_add_opp_table_v1(struct device *dev)
-{
- const struct property *prop;
- const __be32 *val;
- int nr;
-
- prop = of_find_property(dev->of_node, "operating-points", NULL);
- if (!prop)
- return -ENODEV;
- if (!prop->value)
- return -ENODATA;
-
- /*
- * Each OPP is a set of tuples consisting of frequency and
- * voltage like <freq-kHz vol-uV>.
- */
- nr = prop->length / sizeof(u32);
- if (nr % 2) {
- dev_err(dev, "%s: Invalid OPP table\n", __func__);
- return -EINVAL;
- }
-
- val = prop->value;
- while (nr) {
- unsigned long freq = be32_to_cpup(val++) * 1000;
- unsigned long volt = be32_to_cpup(val++);
-
- if (_opp_add_v1(dev, freq, volt, false))
- dev_warn(dev, "%s: Failed to add OPP %ld\n",
- __func__, freq);
- nr -= 2;
- }
-
- return 0;
-}
/**
- * dev_pm_opp_of_add_table() - Initialize opp table from device tree
+ * dev_pm_opp_remove_table() - Free all OPPs associated with the device
* @dev: device pointer used to lookup OPP table.
*
- * Register the initial OPP table with the OPP library for given device.
+ * Free both OPPs created using static entries present in DT and the
+ * dynamically added entries.
*
* Locking: The internal opp_table and opp structures are RCU protected.
* Hence this function indirectly uses RCU updater strategy with mutex locks
* to keep the integrity of the internal data structures. Callers should ensure
* that this function is *NOT* called under RCU protection or in contexts where
* mutex cannot be locked.
- *
- * Return:
- * 0 On success OR
- * Duplicate OPPs (both freq and volt are same) and opp->available
- * -EEXIST Freq are same and volt are different OR
- * Duplicate OPPs (both freq and volt are same) and !opp->available
- * -ENOMEM Memory allocation failure
- * -ENODEV when 'operating-points' property is not found or is invalid data
- * in device node.
- * -ENODATA when empty 'operating-points' property is found
- * -EINVAL when invalid entries are found in opp-v2 table
*/
-int dev_pm_opp_of_add_table(struct device *dev)
+void dev_pm_opp_remove_table(struct device *dev)
{
- struct device_node *opp_np;
- int ret;
-
- /*
- * OPPs have two version of bindings now. The older one is deprecated,
- * try for the new binding first.
- */
- opp_np = _of_get_opp_desc_node(dev);
- if (!opp_np) {
- /*
- * Try old-deprecated bindings for backward compatibility with
- * older dtbs.
- */
- return _of_add_opp_table_v1(dev);
- }
-
- ret = _of_add_opp_table_v2(dev, opp_np);
- of_node_put(opp_np);
-
- return ret;
+ _dev_pm_opp_remove_table(dev, true);
}
-EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table);
-#endif
+EXPORT_SYMBOL_GPL(dev_pm_opp_remove_table);
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/export.h>
-#include <linux/of.h>
#include <linux/slab.h>
#include "opp.h"
EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table);
#endif /* CONFIG_CPU_FREQ */
-/* Required only for V1 bindings, as v2 can manage it from DT itself */
-int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
+void _dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask, bool of)
+{
+ struct device *cpu_dev;
+ int cpu;
+
+ WARN_ON(cpumask_empty(cpumask));
+
+ for_each_cpu(cpu, cpumask) {
+ cpu_dev = get_cpu_device(cpu);
+ if (!cpu_dev) {
+ pr_err("%s: failed to get cpu%d device\n", __func__,
+ cpu);
+ continue;
+ }
+
+ if (of)
+ dev_pm_opp_of_remove_table(cpu_dev);
+ else
+ dev_pm_opp_remove_table(cpu_dev);
+ }
+}
+
+/**
+ * dev_pm_opp_cpumask_remove_table() - Removes OPP table for @cpumask
+ * @cpumask: cpumask for which OPP table needs to be removed
+ *
+ * This removes the OPP tables for CPUs present in the @cpumask.
+ * This should be used to remove all the OPPs entries associated with
+ * the cpus in @cpumask.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+void dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask)
+{
+ _dev_pm_opp_cpumask_remove_table(cpumask, false);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_cpumask_remove_table);
+
+/**
+ * dev_pm_opp_set_sharing_cpus() - Mark OPP table as shared by few CPUs
+ * @cpu_dev: CPU device for which we do this operation
+ * @cpumask: cpumask of the CPUs which share the OPP table with @cpu_dev
+ *
+ * This marks OPP table of the @cpu_dev as shared by the CPUs present in
+ * @cpumask.
+ *
+ * Returns -ENODEV if OPP table isn't already present.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev,
+ const struct cpumask *cpumask)
{
struct opp_device *opp_dev;
struct opp_table *opp_table;
opp_table = _find_opp_table(cpu_dev);
if (IS_ERR(opp_table)) {
- ret = -EINVAL;
+ ret = PTR_ERR(opp_table);
goto unlock;
}
__func__, cpu);
continue;
}
+
+ /* Mark opp-table as multiple CPUs are sharing it now */
+ opp_table->shared_opp = true;
}
unlock:
mutex_unlock(&opp_table_lock);
}
EXPORT_SYMBOL_GPL(dev_pm_opp_set_sharing_cpus);
-#ifdef CONFIG_OF
-void dev_pm_opp_of_cpumask_remove_table(cpumask_var_t cpumask)
-{
- struct device *cpu_dev;
- int cpu;
-
- WARN_ON(cpumask_empty(cpumask));
-
- for_each_cpu(cpu, cpumask) {
- cpu_dev = get_cpu_device(cpu);
- if (!cpu_dev) {
- pr_err("%s: failed to get cpu%d device\n", __func__,
- cpu);
- continue;
- }
-
- dev_pm_opp_of_remove_table(cpu_dev);
- }
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_remove_table);
-
-int dev_pm_opp_of_cpumask_add_table(cpumask_var_t cpumask)
-{
- struct device *cpu_dev;
- int cpu, ret = 0;
-
- WARN_ON(cpumask_empty(cpumask));
-
- for_each_cpu(cpu, cpumask) {
- cpu_dev = get_cpu_device(cpu);
- if (!cpu_dev) {
- pr_err("%s: failed to get cpu%d device\n", __func__,
- cpu);
- continue;
- }
-
- ret = dev_pm_opp_of_add_table(cpu_dev);
- if (ret) {
- pr_err("%s: couldn't find opp table for cpu:%d, %d\n",
- __func__, cpu, ret);
-
- /* Free all other OPPs */
- dev_pm_opp_of_cpumask_remove_table(cpumask);
- break;
- }
- }
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_add_table);
-
-/*
- * Works only for OPP v2 bindings.
+/**
+ * dev_pm_opp_get_sharing_cpus() - Get cpumask of CPUs sharing OPPs with @cpu_dev
+ * @cpu_dev: CPU device for which we do this operation
+ * @cpumask: cpumask to update with information of sharing CPUs
+ *
+ * This updates the @cpumask with CPUs that are sharing OPPs with @cpu_dev.
*
- * Returns -ENOENT if operating-points-v2 bindings aren't supported.
+ * Returns -ENODEV if OPP table isn't already present.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
*/
-int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
+int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask)
{
- struct device_node *np, *tmp_np;
- struct device *tcpu_dev;
- int cpu, ret = 0;
-
- /* Get OPP descriptor node */
- np = _of_get_opp_desc_node(cpu_dev);
- if (!np) {
- dev_dbg(cpu_dev, "%s: Couldn't find cpu_dev node.\n", __func__);
- return -ENOENT;
- }
-
- cpumask_set_cpu(cpu_dev->id, cpumask);
-
- /* OPPs are shared ? */
- if (!of_property_read_bool(np, "opp-shared"))
- goto put_cpu_node;
-
- for_each_possible_cpu(cpu) {
- if (cpu == cpu_dev->id)
- continue;
+ struct opp_device *opp_dev;
+ struct opp_table *opp_table;
+ int ret = 0;
- tcpu_dev = get_cpu_device(cpu);
- if (!tcpu_dev) {
- dev_err(cpu_dev, "%s: failed to get cpu%d device\n",
- __func__, cpu);
- ret = -ENODEV;
- goto put_cpu_node;
- }
+ mutex_lock(&opp_table_lock);
- /* Get OPP descriptor node */
- tmp_np = _of_get_opp_desc_node(tcpu_dev);
- if (!tmp_np) {
- dev_err(tcpu_dev, "%s: Couldn't find tcpu_dev node.\n",
- __func__);
- ret = -ENOENT;
- goto put_cpu_node;
- }
+ opp_table = _find_opp_table(cpu_dev);
+ if (IS_ERR(opp_table)) {
+ ret = PTR_ERR(opp_table);
+ goto unlock;
+ }
- /* CPUs are sharing opp node */
- if (np == tmp_np)
- cpumask_set_cpu(cpu, cpumask);
+ cpumask_clear(cpumask);
- of_node_put(tmp_np);
+ if (opp_table->shared_opp) {
+ list_for_each_entry(opp_dev, &opp_table->dev_list, node)
+ cpumask_set_cpu(opp_dev->dev->id, cpumask);
+ } else {
+ cpumask_set_cpu(cpu_dev->id, cpumask);
}
-put_cpu_node:
- of_node_put(np);
+unlock:
+ mutex_unlock(&opp_table_lock);
+
return ret;
}
-EXPORT_SYMBOL_GPL(dev_pm_opp_of_get_sharing_cpus);
-#endif
+EXPORT_SYMBOL_GPL(dev_pm_opp_get_sharing_cpus);
--- /dev/null
+/*
+ * Generic OPP OF helpers
+ *
+ * Copyright (C) 2009-2010 Texas Instruments Incorporated.
+ * Nishanth Menon
+ * Romit Dasgupta
+ * Kevin Hilman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/cpu.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/export.h>
+
+#include "opp.h"
+
+static struct opp_table *_managed_opp(const struct device_node *np)
+{
+ struct opp_table *opp_table;
+
+ list_for_each_entry_rcu(opp_table, &opp_tables, node) {
+ if (opp_table->np == np) {
+ /*
+ * Multiple devices can point to the same OPP table and
+ * so will have same node-pointer, np.
+ *
+ * But the OPPs will be considered as shared only if the
+ * OPP table contains a "opp-shared" property.
+ */
+ return opp_table->shared_opp ? opp_table : NULL;
+ }
+ }
+
+ return NULL;
+}
+
+void _of_init_opp_table(struct opp_table *opp_table, struct device *dev)
+{
+ struct device_node *np;
+
+ /*
+ * Only required for backward compatibility with v1 bindings, but isn't
+ * harmful for other cases. And so we do it unconditionally.
+ */
+ np = of_node_get(dev->of_node);
+ if (np) {
+ u32 val;
+
+ if (!of_property_read_u32(np, "clock-latency", &val))
+ opp_table->clock_latency_ns_max = val;
+ of_property_read_u32(np, "voltage-tolerance",
+ &opp_table->voltage_tolerance_v1);
+ of_node_put(np);
+ }
+}
+
+static bool _opp_is_supported(struct device *dev, struct opp_table *opp_table,
+ struct device_node *np)
+{
+ unsigned int count = opp_table->supported_hw_count;
+ u32 version;
+ int ret;
+
+ if (!opp_table->supported_hw)
+ return true;
+
+ while (count--) {
+ ret = of_property_read_u32_index(np, "opp-supported-hw", count,
+ &version);
+ if (ret) {
+ dev_warn(dev, "%s: failed to read opp-supported-hw property at index %d: %d\n",
+ __func__, count, ret);
+ return false;
+ }
+
+ /* Both of these are bitwise masks of the versions */
+ if (!(version & opp_table->supported_hw[count]))
+ return false;
+ }
+
+ return true;
+}
+
+/* TODO: Support multiple regulators */
+static int opp_parse_supplies(struct dev_pm_opp *opp, struct device *dev,
+ struct opp_table *opp_table)
+{
+ u32 microvolt[3] = {0};
+ u32 val;
+ int count, ret;
+ struct property *prop = NULL;
+ char name[NAME_MAX];
+
+ /* Search for "opp-microvolt-<name>" */
+ if (opp_table->prop_name) {
+ snprintf(name, sizeof(name), "opp-microvolt-%s",
+ opp_table->prop_name);
+ prop = of_find_property(opp->np, name, NULL);
+ }
+
+ if (!prop) {
+ /* Search for "opp-microvolt" */
+ sprintf(name, "opp-microvolt");
+ prop = of_find_property(opp->np, name, NULL);
+
+ /* Missing property isn't a problem, but an invalid entry is */
+ if (!prop)
+ return 0;
+ }
+
+ count = of_property_count_u32_elems(opp->np, name);
+ if (count < 0) {
+ dev_err(dev, "%s: Invalid %s property (%d)\n",
+ __func__, name, count);
+ return count;
+ }
+
+ /* There can be one or three elements here */
+ if (count != 1 && count != 3) {
+ dev_err(dev, "%s: Invalid number of elements in %s property (%d)\n",
+ __func__, name, count);
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32_array(opp->np, name, microvolt, count);
+ if (ret) {
+ dev_err(dev, "%s: error parsing %s: %d\n", __func__, name, ret);
+ return -EINVAL;
+ }
+
+ opp->u_volt = microvolt[0];
+
+ if (count == 1) {
+ opp->u_volt_min = opp->u_volt;
+ opp->u_volt_max = opp->u_volt;
+ } else {
+ opp->u_volt_min = microvolt[1];
+ opp->u_volt_max = microvolt[2];
+ }
+
+ /* Search for "opp-microamp-<name>" */
+ prop = NULL;
+ if (opp_table->prop_name) {
+ snprintf(name, sizeof(name), "opp-microamp-%s",
+ opp_table->prop_name);
+ prop = of_find_property(opp->np, name, NULL);
+ }
+
+ if (!prop) {
+ /* Search for "opp-microamp" */
+ sprintf(name, "opp-microamp");
+ prop = of_find_property(opp->np, name, NULL);
+ }
+
+ if (prop && !of_property_read_u32(opp->np, name, &val))
+ opp->u_amp = val;
+
+ return 0;
+}
+
+/**
+ * dev_pm_opp_of_remove_table() - Free OPP table entries created from static DT
+ * entries
+ * @dev: device pointer used to lookup OPP table.
+ *
+ * Free OPPs created using static entries present in DT.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function indirectly uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+void dev_pm_opp_of_remove_table(struct device *dev)
+{
+ _dev_pm_opp_remove_table(dev, false);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);
+
+/* Returns opp descriptor node for a device, caller must do of_node_put() */
+struct device_node *_of_get_opp_desc_node(struct device *dev)
+{
+ /*
+ * TODO: Support for multiple OPP tables.
+ *
+ * There should be only ONE phandle present in "operating-points-v2"
+ * property.
+ */
+
+ return of_parse_phandle(dev->of_node, "operating-points-v2", 0);
+}
+
+/**
+ * _opp_add_static_v2() - Allocate static OPPs (As per 'v2' DT bindings)
+ * @dev: device for which we do this operation
+ * @np: device node
+ *
+ * This function adds an opp definition to the opp table and returns status. The
+ * opp can be controlled using dev_pm_opp_enable/disable functions and may be
+ * removed by dev_pm_opp_remove.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ *
+ * Return:
+ * 0 On success OR
+ * Duplicate OPPs (both freq and volt are same) and opp->available
+ * -EEXIST Freq are same and volt are different OR
+ * Duplicate OPPs (both freq and volt are same) and !opp->available
+ * -ENOMEM Memory allocation failure
+ * -EINVAL Failed parsing the OPP node
+ */
+static int _opp_add_static_v2(struct device *dev, struct device_node *np)
+{
+ struct opp_table *opp_table;
+ struct dev_pm_opp *new_opp;
+ u64 rate;
+ u32 val;
+ int ret;
+
+ /* Hold our table modification lock here */
+ mutex_lock(&opp_table_lock);
+
+ new_opp = _allocate_opp(dev, &opp_table);
+ if (!new_opp) {
+ ret = -ENOMEM;
+ goto unlock;
+ }
+
+ ret = of_property_read_u64(np, "opp-hz", &rate);
+ if (ret < 0) {
+ dev_err(dev, "%s: opp-hz not found\n", __func__);
+ goto free_opp;
+ }
+
+ /* Check if the OPP supports hardware's hierarchy of versions or not */
+ if (!_opp_is_supported(dev, opp_table, np)) {
+ dev_dbg(dev, "OPP not supported by hardware: %llu\n", rate);
+ goto free_opp;
+ }
+
+ /*
+ * Rate is defined as an unsigned long in clk API, and so casting
+ * explicitly to its type. Must be fixed once rate is 64 bit
+ * guaranteed in clk API.
+ */
+ new_opp->rate = (unsigned long)rate;
+ new_opp->turbo = of_property_read_bool(np, "turbo-mode");
+
+ new_opp->np = np;
+ new_opp->dynamic = false;
+ new_opp->available = true;
+
+ if (!of_property_read_u32(np, "clock-latency-ns", &val))
+ new_opp->clock_latency_ns = val;
+
+ ret = opp_parse_supplies(new_opp, dev, opp_table);
+ if (ret)
+ goto free_opp;
+
+ ret = _opp_add(dev, new_opp, opp_table);
+ if (ret)
+ goto free_opp;
+
+ /* OPP to select on device suspend */
+ if (of_property_read_bool(np, "opp-suspend")) {
+ if (opp_table->suspend_opp) {
+ dev_warn(dev, "%s: Multiple suspend OPPs found (%lu %lu)\n",
+ __func__, opp_table->suspend_opp->rate,
+ new_opp->rate);
+ } else {
+ new_opp->suspend = true;
+ opp_table->suspend_opp = new_opp;
+ }
+ }
+
+ if (new_opp->clock_latency_ns > opp_table->clock_latency_ns_max)
+ opp_table->clock_latency_ns_max = new_opp->clock_latency_ns;
+
+ mutex_unlock(&opp_table_lock);
+
+ pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu latency:%lu\n",
+ __func__, new_opp->turbo, new_opp->rate, new_opp->u_volt,
+ new_opp->u_volt_min, new_opp->u_volt_max,
+ new_opp->clock_latency_ns);
+
+ /*
+ * Notify the changes in the availability of the operable
+ * frequency/voltage list.
+ */
+ srcu_notifier_call_chain(&opp_table->srcu_head, OPP_EVENT_ADD, new_opp);
+ return 0;
+
+free_opp:
+ _opp_remove(opp_table, new_opp, false);
+unlock:
+ mutex_unlock(&opp_table_lock);
+ return ret;
+}
+
+/* Initializes OPP tables based on new bindings */
+static int _of_add_opp_table_v2(struct device *dev, struct device_node *opp_np)
+{
+ struct device_node *np;
+ struct opp_table *opp_table;
+ int ret = 0, count = 0;
+
+ mutex_lock(&opp_table_lock);
+
+ opp_table = _managed_opp(opp_np);
+ if (opp_table) {
+ /* OPPs are already managed */
+ if (!_add_opp_dev(dev, opp_table))
+ ret = -ENOMEM;
+ mutex_unlock(&opp_table_lock);
+ return ret;
+ }
+ mutex_unlock(&opp_table_lock);
+
+ /* We have opp-table node now, iterate over it and add OPPs */
+ for_each_available_child_of_node(opp_np, np) {
+ count++;
+
+ ret = _opp_add_static_v2(dev, np);
+ if (ret) {
+ dev_err(dev, "%s: Failed to add OPP, %d\n", __func__,
+ ret);
+ goto free_table;
+ }
+ }
+
+ /* There should be one of more OPP defined */
+ if (WARN_ON(!count))
+ return -ENOENT;
+
+ mutex_lock(&opp_table_lock);
+
+ opp_table = _find_opp_table(dev);
+ if (WARN_ON(IS_ERR(opp_table))) {
+ ret = PTR_ERR(opp_table);
+ mutex_unlock(&opp_table_lock);
+ goto free_table;
+ }
+
+ opp_table->np = opp_np;
+ opp_table->shared_opp = of_property_read_bool(opp_np, "opp-shared");
+
+ mutex_unlock(&opp_table_lock);
+
+ return 0;
+
+free_table:
+ dev_pm_opp_of_remove_table(dev);
+
+ return ret;
+}
+
+/* Initializes OPP tables based on old-deprecated bindings */
+static int _of_add_opp_table_v1(struct device *dev)
+{
+ const struct property *prop;
+ const __be32 *val;
+ int nr;
+
+ prop = of_find_property(dev->of_node, "operating-points", NULL);
+ if (!prop)
+ return -ENODEV;
+ if (!prop->value)
+ return -ENODATA;
+
+ /*
+ * Each OPP is a set of tuples consisting of frequency and
+ * voltage like <freq-kHz vol-uV>.
+ */
+ nr = prop->length / sizeof(u32);
+ if (nr % 2) {
+ dev_err(dev, "%s: Invalid OPP table\n", __func__);
+ return -EINVAL;
+ }
+
+ val = prop->value;
+ while (nr) {
+ unsigned long freq = be32_to_cpup(val++) * 1000;
+ unsigned long volt = be32_to_cpup(val++);
+
+ if (_opp_add_v1(dev, freq, volt, false))
+ dev_warn(dev, "%s: Failed to add OPP %ld\n",
+ __func__, freq);
+ nr -= 2;
+ }
+
+ return 0;
+}
+
+/**
+ * dev_pm_opp_of_add_table() - Initialize opp table from device tree
+ * @dev: device pointer used to lookup OPP table.
+ *
+ * Register the initial OPP table with the OPP library for given device.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function indirectly uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ *
+ * Return:
+ * 0 On success OR
+ * Duplicate OPPs (both freq and volt are same) and opp->available
+ * -EEXIST Freq are same and volt are different OR
+ * Duplicate OPPs (both freq and volt are same) and !opp->available
+ * -ENOMEM Memory allocation failure
+ * -ENODEV when 'operating-points' property is not found or is invalid data
+ * in device node.
+ * -ENODATA when empty 'operating-points' property is found
+ * -EINVAL when invalid entries are found in opp-v2 table
+ */
+int dev_pm_opp_of_add_table(struct device *dev)
+{
+ struct device_node *opp_np;
+ int ret;
+
+ /*
+ * OPPs have two version of bindings now. The older one is deprecated,
+ * try for the new binding first.
+ */
+ opp_np = _of_get_opp_desc_node(dev);
+ if (!opp_np) {
+ /*
+ * Try old-deprecated bindings for backward compatibility with
+ * older dtbs.
+ */
+ return _of_add_opp_table_v1(dev);
+ }
+
+ ret = _of_add_opp_table_v2(dev, opp_np);
+ of_node_put(opp_np);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table);
+
+/* CPU device specific helpers */
+
+/**
+ * dev_pm_opp_of_cpumask_remove_table() - Removes OPP table for @cpumask
+ * @cpumask: cpumask for which OPP table needs to be removed
+ *
+ * This removes the OPP tables for CPUs present in the @cpumask.
+ * This should be used only to remove static entries created from DT.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+void dev_pm_opp_of_cpumask_remove_table(const struct cpumask *cpumask)
+{
+ _dev_pm_opp_cpumask_remove_table(cpumask, true);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_remove_table);
+
+/**
+ * dev_pm_opp_of_cpumask_add_table() - Adds OPP table for @cpumask
+ * @cpumask: cpumask for which OPP table needs to be added.
+ *
+ * This adds the OPP tables for CPUs present in the @cpumask.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask)
+{
+ struct device *cpu_dev;
+ int cpu, ret = 0;
+
+ WARN_ON(cpumask_empty(cpumask));
+
+ for_each_cpu(cpu, cpumask) {
+ cpu_dev = get_cpu_device(cpu);
+ if (!cpu_dev) {
+ pr_err("%s: failed to get cpu%d device\n", __func__,
+ cpu);
+ continue;
+ }
+
+ ret = dev_pm_opp_of_add_table(cpu_dev);
+ if (ret) {
+ pr_err("%s: couldn't find opp table for cpu:%d, %d\n",
+ __func__, cpu, ret);
+
+ /* Free all other OPPs */
+ dev_pm_opp_of_cpumask_remove_table(cpumask);
+ break;
+ }
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_add_table);
+
+/*
+ * Works only for OPP v2 bindings.
+ *
+ * Returns -ENOENT if operating-points-v2 bindings aren't supported.
+ */
+/**
+ * dev_pm_opp_of_get_sharing_cpus() - Get cpumask of CPUs sharing OPPs with
+ * @cpu_dev using operating-points-v2
+ * bindings.
+ *
+ * @cpu_dev: CPU device for which we do this operation
+ * @cpumask: cpumask to update with information of sharing CPUs
+ *
+ * This updates the @cpumask with CPUs that are sharing OPPs with @cpu_dev.
+ *
+ * Returns -ENOENT if operating-points-v2 isn't present for @cpu_dev.
+ *
+ * Locking: The internal opp_table and opp structures are RCU protected.
+ * Hence this function internally uses RCU updater strategy with mutex locks
+ * to keep the integrity of the internal data structures. Callers should ensure
+ * that this function is *NOT* called under RCU protection or in contexts where
+ * mutex cannot be locked.
+ */
+int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev,
+ struct cpumask *cpumask)
+{
+ struct device_node *np, *tmp_np;
+ struct device *tcpu_dev;
+ int cpu, ret = 0;
+
+ /* Get OPP descriptor node */
+ np = _of_get_opp_desc_node(cpu_dev);
+ if (!np) {
+ dev_dbg(cpu_dev, "%s: Couldn't find cpu_dev node.\n", __func__);
+ return -ENOENT;
+ }
+
+ cpumask_set_cpu(cpu_dev->id, cpumask);
+
+ /* OPPs are shared ? */
+ if (!of_property_read_bool(np, "opp-shared"))
+ goto put_cpu_node;
+
+ for_each_possible_cpu(cpu) {
+ if (cpu == cpu_dev->id)
+ continue;
+
+ tcpu_dev = get_cpu_device(cpu);
+ if (!tcpu_dev) {
+ dev_err(cpu_dev, "%s: failed to get cpu%d device\n",
+ __func__, cpu);
+ ret = -ENODEV;
+ goto put_cpu_node;
+ }
+
+ /* Get OPP descriptor node */
+ tmp_np = _of_get_opp_desc_node(tcpu_dev);
+ if (!tmp_np) {
+ dev_err(tcpu_dev, "%s: Couldn't find tcpu_dev node.\n",
+ __func__);
+ ret = -ENOENT;
+ goto put_cpu_node;
+ }
+
+ /* CPUs are sharing opp node */
+ if (np == tmp_np)
+ cpumask_set_cpu(cpu, cpumask);
+
+ of_node_put(tmp_np);
+ }
+
+put_cpu_node:
+ of_node_put(np);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_get_sharing_cpus);
/* Lock to allow exclusive modification to the device and opp lists */
extern struct mutex opp_table_lock;
+extern struct list_head opp_tables;
+
/*
* Internal data structure organization with the OPP layer library is as
* follows:
struct opp_table *_find_opp_table(struct device *dev);
struct opp_device *_add_opp_dev(const struct device *dev, struct opp_table *opp_table);
struct device_node *_of_get_opp_desc_node(struct device *dev);
+void _dev_pm_opp_remove_table(struct device *dev, bool remove_all);
+struct dev_pm_opp *_allocate_opp(struct device *dev, struct opp_table **opp_table);
+int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, struct opp_table *opp_table);
+void _opp_remove(struct opp_table *opp_table, struct dev_pm_opp *opp, bool notify);
+int _opp_add_v1(struct device *dev, unsigned long freq, long u_volt, bool dynamic);
+void _dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask, bool of);
+
+#ifdef CONFIG_OF
+void _of_init_opp_table(struct opp_table *opp_table, struct device *dev);
+#else
+static inline void _of_init_opp_table(struct opp_table *opp_table, struct device *dev) {}
+#endif
#ifdef CONFIG_DEBUG_FS
void opp_debug_remove_one(struct dev_pm_opp *opp);
goto out;
}
- ret = callback(dev);
+ ret = pm_runtime_set_active(dev);
if (ret)
goto out;
- pm_runtime_set_active(dev);
+ ret = callback(dev);
+ if (ret) {
+ pm_runtime_set_suspended(dev);
+ goto out;
+ }
+
pm_runtime_mark_last_busy(dev);
out:
pm_runtime_enable(dev);
static inline bool is_pset_node(struct fwnode_handle *fwnode)
{
- return fwnode && fwnode->type == FWNODE_PDATA;
+ return !IS_ERR_OR_NULL(fwnode) && fwnode->type == FWNODE_PDATA;
}
static inline struct property_set *to_pset_node(struct fwnode_handle *fwnode)
u8 *order, u64 *snap_size);
static int _rbd_dev_v2_snap_features(struct rbd_device *rbd_dev, u64 snap_id,
u64 *snap_features);
-static u64 rbd_snap_id_by_name(struct rbd_device *rbd_dev, const char *name);
static int rbd_open(struct block_device *bdev, fmode_t mode)
{
struct rbd_device *rbd_dev = (struct rbd_device *)data;
int ret;
- if (!rbd_dev)
- return;
-
dout("%s: \"%s\" notify_id %llu opcode %u\n", __func__,
rbd_dev->header_name, (unsigned long long)notify_id,
(unsigned int)opcode);
ceph_osdc_cancel_event(rbd_dev->watch_event);
rbd_dev->watch_event = NULL;
+
+ dout("%s flushing notifies\n", __func__);
+ ceph_osdc_flush_notifies(&rbd_dev->rbd_client->client->osdc);
}
/*
static void rbd_dev_update_size(struct rbd_device *rbd_dev)
{
sector_t size;
- bool removing;
/*
- * Don't hold the lock while doing disk operations,
- * or lock ordering will conflict with the bdev mutex via:
- * rbd_add() -> blkdev_get() -> rbd_open()
+ * If EXISTS is not set, rbd_dev->disk may be NULL, so don't
+ * try to update its size. If REMOVING is set, updating size
+ * is just useless work since the device can't be opened.
*/
- spin_lock_irq(&rbd_dev->lock);
- removing = test_bit(RBD_DEV_FLAG_REMOVING, &rbd_dev->flags);
- spin_unlock_irq(&rbd_dev->lock);
- /*
- * If the device is being removed, rbd_dev->disk has
- * been destroyed, so don't try to update its size
- */
- if (!removing) {
+ if (test_bit(RBD_DEV_FLAG_EXISTS, &rbd_dev->flags) &&
+ !test_bit(RBD_DEV_FLAG_REMOVING, &rbd_dev->flags)) {
size = (sector_t)rbd_dev->mapping.size / SECTOR_SIZE;
dout("setting size to %llu sectors", (unsigned long long)size);
set_capacity(rbd_dev->disk, size);
__le64 features;
__le64 incompat;
} __attribute__ ((packed)) features_buf = { 0 };
- u64 incompat;
+ u64 unsup;
int ret;
ret = rbd_obj_method_sync(rbd_dev, rbd_dev->header_name,
if (ret < sizeof (features_buf))
return -ERANGE;
- incompat = le64_to_cpu(features_buf.incompat);
- if (incompat & ~RBD_FEATURES_SUPPORTED)
+ unsup = le64_to_cpu(features_buf.incompat) & ~RBD_FEATURES_SUPPORTED;
+ if (unsup) {
+ rbd_warn(rbd_dev, "image uses unsupported features: 0x%llx",
+ unsup);
return -ENXIO;
+ }
*snap_features = le64_to_cpu(features_buf.features);
return ret;
}
+/*
+ * rbd_dev->header_rwsem must be locked for write and will be unlocked
+ * upon return.
+ */
static int rbd_dev_device_setup(struct rbd_device *rbd_dev)
{
int ret;
ret = rbd_dev_id_get(rbd_dev);
if (ret)
- return ret;
+ goto err_out_unlock;
BUILD_BUG_ON(DEV_NAME_LEN
< sizeof (RBD_DRV_NAME) + MAX_INT_FORMAT_WIDTH);
/* Everything's ready. Announce the disk to the world. */
set_bit(RBD_DEV_FLAG_EXISTS, &rbd_dev->flags);
- add_disk(rbd_dev->disk);
+ up_write(&rbd_dev->header_rwsem);
+ add_disk(rbd_dev->disk);
pr_info("%s: added with size 0x%llx\n", rbd_dev->disk->disk_name,
(unsigned long long) rbd_dev->mapping.size);
unregister_blkdev(rbd_dev->major, rbd_dev->name);
err_out_id:
rbd_dev_id_put(rbd_dev);
+err_out_unlock:
+ up_write(&rbd_dev->header_rwsem);
return ret;
}
spec = NULL; /* rbd_dev now owns this */
rbd_opts = NULL; /* rbd_dev now owns this */
+ down_write(&rbd_dev->header_rwsem);
rc = rbd_dev_image_probe(rbd_dev, 0);
if (rc < 0)
goto err_out_rbd_dev;
return rc;
err_out_rbd_dev:
+ up_write(&rbd_dev->header_rwsem);
rbd_dev_destroy(rbd_dev);
err_out_client:
rbd_put_client(rbdc);
return ret;
rbd_dev_header_unwatch_sync(rbd_dev);
- /*
- * flush remaining watch callbacks - these must be complete
- * before the osd_client is shutdown
- */
- dout("%s: flushing notifies", __func__);
- ceph_osdc_flush_notifies(&rbd_dev->rbd_client->client->osdc);
/*
* Don't free anything from rbd_dev->disk until after all
clk[IMX6QDL_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1", 2, 7);
} else {
clk[IMX6QDL_CLK_ECSPI_ROOT] = imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6);
- clk[IMX6QDL_CLK_CAN_ROOT] = imx_clk_divider("can_root", "pll3_60", base + 0x20, 2, 6);
+ clk[IMX6QDL_CLK_CAN_ROOT] = imx_clk_divider("can_root", "pll3_60m", base + 0x20, 2, 6);
clk[IMX6QDL_CLK_IPG_PER] = imx_clk_fixup_divider("ipg_per", "ipg", base + 0x1c, 0, 6, imx_cscmr1_fixup);
clk[IMX6QDL_CLK_UART_SERIAL_PODF] = imx_clk_divider("uart_serial_podf", "pll3_80m", base + 0x24, 0, 6);
clk[IMX6QDL_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
if CPU_FREQ
+config CPU_FREQ_GOV_ATTR_SET
+ bool
+
config CPU_FREQ_GOV_COMMON
+ select CPU_FREQ_GOV_ATTR_SET
select IRQ_WORK
bool
Be aware that not all cpufreq drivers support the conservative
governor. If unsure have a look at the help section of the
driver. Fallback governor will be the performance governor.
+
+config CPU_FREQ_DEFAULT_GOV_SCHEDUTIL
+ bool "schedutil"
+ depends on SMP
+ select CPU_FREQ_GOV_SCHEDUTIL
+ select CPU_FREQ_GOV_PERFORMANCE
+ help
+ Use the 'schedutil' CPUFreq governor by default. If unsure,
+ have a look at the help section of that governor. The fallback
+ governor will be 'performance'.
+
endchoice
config CPU_FREQ_GOV_PERFORMANCE
If in doubt, say N.
+config CPU_FREQ_GOV_SCHEDUTIL
+ tristate "'schedutil' cpufreq policy governor"
+ depends on CPU_FREQ && SMP
+ select CPU_FREQ_GOV_ATTR_SET
+ select IRQ_WORK
+ help
+ This governor makes decisions based on the utilization data provided
+ by the scheduler. It sets the CPU frequency to be proportional to
+ the utilization/capacity ratio coming from the scheduler. If the
+ utilization is frequency-invariant, the new frequency is also
+ proportional to the maximum available frequency. If that is not the
+ case, it is proportional to the current frequency of the CPU. The
+ frequency tipping point is at utilization/capacity equal to 80% in
+ both cases.
+
+ To compile this driver as a module, choose M here: the module will
+ be called cpufreq_schedutil.
+
+ If in doubt, say N.
+
comment "CPU frequency scaling drivers"
config CPUFREQ_DT
depends on HAVE_CLK && OF
# if CPU_THERMAL is on and THERMAL=m, CPUFREQ_DT cannot be =y:
depends on !CPU_THERMAL || THERMAL
+ select CPUFREQ_DT_PLATDEV
select PM_OPP
help
This adds a generic DT based cpufreq driver for frequency management.
If in doubt, say N.
+config CPUFREQ_DT_PLATDEV
+ bool
+ help
+ This adds a generic DT based cpufreq platdev driver for frequency
+ management. This creates a 'cpufreq-dt' platform device, on the
+ supported platforms.
+
+ If in doubt, say N.
+
if X86
source "drivers/cpufreq/Kconfig.x86"
endif
If in doubt, say N.
-config ARM_HISI_ACPU_CPUFREQ
- tristate "Hisilicon ACPU CPUfreq driver"
- depends on ARCH_HISI && CPUFREQ_DT
- select PM_OPP
- help
- This enables the hisilicon ACPU CPUfreq driver.
-
- If in doubt, say N.
-
config ARM_IMX6Q_CPUFREQ
tristate "Freescale i.MX6 cpufreq support"
depends on ARCH_MXC
config X86_INTEL_PSTATE
bool "Intel P state control"
depends on X86
+ select ACPI_PROCESSOR if ACPI
help
This driver provides a P state for Intel core processors.
The driver implements an internal governor and will become
obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o
obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o
obj-$(CONFIG_CPU_FREQ_GOV_COMMON) += cpufreq_governor.o
+obj-$(CONFIG_CPU_FREQ_GOV_ATTR_SET) += cpufreq_governor_attr_set.o
obj-$(CONFIG_CPUFREQ_DT) += cpufreq-dt.o
+obj-$(CONFIG_CPUFREQ_DT_PLATDEV) += cpufreq-dt-platdev.o
##################################################################################
# x86 drivers.
obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o
obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
-obj-$(CONFIG_ARM_HISI_ACPU_CPUFREQ) += hisi-acpu-cpufreq.o
obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
obj-$(CONFIG_ARM_INTEGRATOR) += integrator-cpufreq.o
obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o
obj-$(CONFIG_ARM_TEGRA124_CPUFREQ) += tegra124-cpufreq.o
obj-$(CONFIG_ARM_VEXPRESS_SPC_CPUFREQ) += vexpress-spc-cpufreq.o
obj-$(CONFIG_ACPI_CPPC_CPUFREQ) += cppc_cpufreq.o
+obj-$(CONFIG_MACH_MVEBU_V7) += mvebu-cpufreq.o
##################################################################################
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
MODULE_DESCRIPTION("ACPI Processor P-States Driver");
MODULE_LICENSE("GPL");
-#define PFX "acpi-cpufreq: "
-
enum {
UNDEFINED_CAPABLE = 0,
SYSTEM_INTEL_MSR_CAPABLE,
#define MSR_K7_HWCR_CPB_DIS (1ULL << 25)
struct acpi_cpufreq_data {
- struct cpufreq_frequency_table *freq_table;
unsigned int resume;
unsigned int cpu_feature;
unsigned int acpi_perf_cpu;
return cpu_has(cpu, X86_FEATURE_HW_PSTATE);
}
-static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data)
+static unsigned extract_io(struct cpufreq_policy *policy, u32 value)
{
+ struct acpi_cpufreq_data *data = policy->driver_data;
struct acpi_processor_performance *perf;
int i;
for (i = 0; i < perf->state_count; i++) {
if (value == perf->states[i].status)
- return data->freq_table[i].frequency;
+ return policy->freq_table[i].frequency;
}
return 0;
}
-static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data)
+static unsigned extract_msr(struct cpufreq_policy *policy, u32 msr)
{
+ struct acpi_cpufreq_data *data = policy->driver_data;
struct cpufreq_frequency_table *pos;
struct acpi_processor_performance *perf;
perf = to_perf_data(data);
- cpufreq_for_each_entry(pos, data->freq_table)
+ cpufreq_for_each_entry(pos, policy->freq_table)
if (msr == perf->states[pos->driver_data].status)
return pos->frequency;
- return data->freq_table[0].frequency;
+ return policy->freq_table[0].frequency;
}
-static unsigned extract_freq(u32 val, struct acpi_cpufreq_data *data)
+static unsigned extract_freq(struct cpufreq_policy *policy, u32 val)
{
+ struct acpi_cpufreq_data *data = policy->driver_data;
+
switch (data->cpu_feature) {
case SYSTEM_INTEL_MSR_CAPABLE:
case SYSTEM_AMD_MSR_CAPABLE:
- return extract_msr(val, data);
+ return extract_msr(policy, val);
case SYSTEM_IO_CAPABLE:
- return extract_io(val, data);
+ return extract_io(policy, val);
default:
return 0;
}
return 0;
data = policy->driver_data;
- if (unlikely(!data || !data->freq_table))
+ if (unlikely(!data || !policy->freq_table))
return 0;
- cached_freq = data->freq_table[to_perf_data(data)->state].frequency;
- freq = extract_freq(get_cur_val(cpumask_of(cpu), data), data);
+ cached_freq = policy->freq_table[to_perf_data(data)->state].frequency;
+ freq = extract_freq(policy, get_cur_val(cpumask_of(cpu), data));
if (freq != cached_freq) {
/*
* The dreaded BIOS frequency change behind our back.
return freq;
}
-static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq,
- struct acpi_cpufreq_data *data)
+static unsigned int check_freqs(struct cpufreq_policy *policy,
+ const struct cpumask *mask, unsigned int freq)
{
+ struct acpi_cpufreq_data *data = policy->driver_data;
unsigned int cur_freq;
unsigned int i;
for (i = 0; i < 100; i++) {
- cur_freq = extract_freq(get_cur_val(mask, data), data);
+ cur_freq = extract_freq(policy, get_cur_val(mask, data));
if (cur_freq == freq)
return 1;
udelay(10);
unsigned int next_perf_state = 0; /* Index into perf table */
int result = 0;
- if (unlikely(data == NULL || data->freq_table == NULL)) {
+ if (unlikely(!data)) {
return -ENODEV;
}
perf = to_perf_data(data);
- next_perf_state = data->freq_table[index].driver_data;
+ next_perf_state = policy->freq_table[index].driver_data;
if (perf->state == next_perf_state) {
if (unlikely(data->resume)) {
pr_debug("Called after resume, resetting to P%d\n",
drv_write(data, mask, perf->states[next_perf_state].control);
if (acpi_pstate_strict) {
- if (!check_freqs(mask, data->freq_table[index].frequency,
- data)) {
+ if (!check_freqs(policy, mask,
+ policy->freq_table[index].frequency)) {
pr_debug("acpi_cpufreq_target failed (%d)\n",
policy->cpu);
result = -EAGAIN;
return result;
}
+unsigned int acpi_cpufreq_fast_switch(struct cpufreq_policy *policy,
+ unsigned int target_freq)
+{
+ struct acpi_cpufreq_data *data = policy->driver_data;
+ struct acpi_processor_performance *perf;
+ struct cpufreq_frequency_table *entry;
+ unsigned int next_perf_state, next_freq, freq;
+
+ /*
+ * Find the closest frequency above target_freq.
+ *
+ * The table is sorted in the reverse order with respect to the
+ * frequency and all of the entries are valid (see the initialization).
+ */
+ entry = policy->freq_table;
+ do {
+ entry++;
+ freq = entry->frequency;
+ } while (freq >= target_freq && freq != CPUFREQ_TABLE_END);
+ entry--;
+ next_freq = entry->frequency;
+ next_perf_state = entry->driver_data;
+
+ perf = to_perf_data(data);
+ if (perf->state == next_perf_state) {
+ if (unlikely(data->resume))
+ data->resume = 0;
+ else
+ return next_freq;
+ }
+
+ data->cpu_freq_write(&perf->control_register,
+ perf->states[next_perf_state].control);
+ perf->state = next_perf_state;
+ return next_freq;
+}
+
static unsigned long
acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu)
{
if ((c->x86 == 15) &&
(c->x86_model == 6) &&
(c->x86_mask == 8)) {
- printk(KERN_INFO "acpi-cpufreq: Intel(R) "
- "Xeon(R) 7100 Errata AL30, processors may "
- "lock up on frequency changes: disabling "
- "acpi-cpufreq.\n");
+ pr_info("Intel(R) Xeon(R) 7100 Errata AL30, processors may lock up on frequency changes: disabling acpi-cpufreq\n");
return -ENODEV;
}
}
unsigned int result = 0;
struct cpuinfo_x86 *c = &cpu_data(policy->cpu);
struct acpi_processor_performance *perf;
+ struct cpufreq_frequency_table *freq_table;
#ifdef CONFIG_SMP
static int blacklisted;
#endif
cpumask_copy(data->freqdomain_cpus,
topology_sibling_cpumask(cpu));
policy->shared_type = CPUFREQ_SHARED_TYPE_HW;
- pr_info_once(PFX "overriding BIOS provided _PSD data\n");
+ pr_info_once("overriding BIOS provided _PSD data\n");
}
#endif
goto err_unreg;
}
- data->freq_table = kzalloc(sizeof(*data->freq_table) *
+ freq_table = kzalloc(sizeof(*freq_table) *
(perf->state_count+1), GFP_KERNEL);
- if (!data->freq_table) {
+ if (!freq_table) {
result = -ENOMEM;
goto err_unreg;
}
if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE &&
policy->cpuinfo.transition_latency > 20 * 1000) {
policy->cpuinfo.transition_latency = 20 * 1000;
- printk_once(KERN_INFO
- "P-state transition latency capped at 20 uS\n");
+ pr_info_once("P-state transition latency capped at 20 uS\n");
}
/* table init */
for (i = 0; i < perf->state_count; i++) {
if (i > 0 && perf->states[i].core_frequency >=
- data->freq_table[valid_states-1].frequency / 1000)
+ freq_table[valid_states-1].frequency / 1000)
continue;
- data->freq_table[valid_states].driver_data = i;
- data->freq_table[valid_states].frequency =
+ freq_table[valid_states].driver_data = i;
+ freq_table[valid_states].frequency =
perf->states[i].core_frequency * 1000;
valid_states++;
}
- data->freq_table[valid_states].frequency = CPUFREQ_TABLE_END;
+ freq_table[valid_states].frequency = CPUFREQ_TABLE_END;
perf->state = 0;
- result = cpufreq_table_validate_and_show(policy, data->freq_table);
+ result = cpufreq_table_validate_and_show(policy, freq_table);
if (result)
goto err_freqfree;
if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq)
- printk(KERN_WARNING FW_WARN "P-state 0 is not max freq\n");
+ pr_warn(FW_WARN "P-state 0 is not max freq\n");
switch (perf->control_register.space_id) {
case ACPI_ADR_SPACE_SYSTEM_IO:
*/
data->resume = 1;
+ policy->fast_switch_possible = !acpi_pstate_strict &&
+ !(policy_is_shared(policy) && policy->shared_type != CPUFREQ_SHARED_TYPE_ANY);
+
return result;
err_freqfree:
- kfree(data->freq_table);
+ kfree(freq_table);
err_unreg:
acpi_processor_unregister_performance(cpu);
err_free_mask:
pr_debug("acpi_cpufreq_cpu_exit\n");
- if (data) {
- policy->driver_data = NULL;
- acpi_processor_unregister_performance(data->acpi_perf_cpu);
- free_cpumask_var(data->freqdomain_cpus);
- kfree(data->freq_table);
- kfree(data);
- }
+ policy->fast_switch_possible = false;
+ policy->driver_data = NULL;
+ acpi_processor_unregister_performance(data->acpi_perf_cpu);
+ free_cpumask_var(data->freqdomain_cpus);
+ kfree(policy->freq_table);
+ kfree(data);
return 0;
}
static struct cpufreq_driver acpi_cpufreq_driver = {
.verify = cpufreq_generic_frequency_table_verify,
.target_index = acpi_cpufreq_target,
+ .fast_switch = acpi_cpufreq_fast_switch,
.bios_limit = acpi_processor_get_bios_limit,
.init = acpi_cpufreq_cpu_init,
.exit = acpi_cpufreq_cpu_exit,
return 0;
}
-static void _put_cluster_clk_and_freq_table(struct device *cpu_dev)
+static void _put_cluster_clk_and_freq_table(struct device *cpu_dev,
+ const struct cpumask *cpumask)
{
u32 cluster = raw_cpu_to_cluster(cpu_dev->id);
clk_put(clk[cluster]);
dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table[cluster]);
if (arm_bL_ops->free_opp_table)
- arm_bL_ops->free_opp_table(cpu_dev);
+ arm_bL_ops->free_opp_table(cpumask);
dev_dbg(cpu_dev, "%s: cluster: %d\n", __func__, cluster);
}
-static void put_cluster_clk_and_freq_table(struct device *cpu_dev)
+static void put_cluster_clk_and_freq_table(struct device *cpu_dev,
+ const struct cpumask *cpumask)
{
u32 cluster = cpu_to_cluster(cpu_dev->id);
int i;
return;
if (cluster < MAX_CLUSTERS)
- return _put_cluster_clk_and_freq_table(cpu_dev);
+ return _put_cluster_clk_and_freq_table(cpu_dev, cpumask);
for_each_present_cpu(i) {
struct device *cdev = get_cpu_device(i);
return;
}
- _put_cluster_clk_and_freq_table(cdev);
+ _put_cluster_clk_and_freq_table(cdev, cpumask);
}
/* free virtual table */
kfree(freq_table[cluster]);
}
-static int _get_cluster_clk_and_freq_table(struct device *cpu_dev)
+static int _get_cluster_clk_and_freq_table(struct device *cpu_dev,
+ const struct cpumask *cpumask)
{
u32 cluster = raw_cpu_to_cluster(cpu_dev->id);
int ret;
if (freq_table[cluster])
return 0;
- ret = arm_bL_ops->init_opp_table(cpu_dev);
+ ret = arm_bL_ops->init_opp_table(cpumask);
if (ret) {
dev_err(cpu_dev, "%s: init_opp_table failed, cpu: %d, err: %d\n",
__func__, cpu_dev->id, ret);
free_opp_table:
if (arm_bL_ops->free_opp_table)
- arm_bL_ops->free_opp_table(cpu_dev);
+ arm_bL_ops->free_opp_table(cpumask);
out:
dev_err(cpu_dev, "%s: Failed to get data for cluster: %d\n", __func__,
cluster);
return ret;
}
-static int get_cluster_clk_and_freq_table(struct device *cpu_dev)
+static int get_cluster_clk_and_freq_table(struct device *cpu_dev,
+ const struct cpumask *cpumask)
{
u32 cluster = cpu_to_cluster(cpu_dev->id);
int i, ret;
return 0;
if (cluster < MAX_CLUSTERS) {
- ret = _get_cluster_clk_and_freq_table(cpu_dev);
+ ret = _get_cluster_clk_and_freq_table(cpu_dev, cpumask);
if (ret)
atomic_dec(&cluster_usage[cluster]);
return ret;
return -ENODEV;
}
- ret = _get_cluster_clk_and_freq_table(cdev);
+ ret = _get_cluster_clk_and_freq_table(cdev, cpumask);
if (ret)
goto put_clusters;
}
return -ENODEV;
}
- _put_cluster_clk_and_freq_table(cdev);
+ _put_cluster_clk_and_freq_table(cdev, cpumask);
}
atomic_dec(&cluster_usage[cluster]);
return -ENODEV;
}
- ret = get_cluster_clk_and_freq_table(cpu_dev);
- if (ret)
- return ret;
-
- ret = cpufreq_table_validate_and_show(policy, freq_table[cur_cluster]);
- if (ret) {
- dev_err(cpu_dev, "CPU %d, cluster: %d invalid freq table\n",
- policy->cpu, cur_cluster);
- put_cluster_clk_and_freq_table(cpu_dev);
- return ret;
- }
-
if (cur_cluster < MAX_CLUSTERS) {
int cpu;
per_cpu(physical_cluster, policy->cpu) = A15_CLUSTER;
}
+ ret = get_cluster_clk_and_freq_table(cpu_dev, policy->cpus);
+ if (ret)
+ return ret;
+
+ ret = cpufreq_table_validate_and_show(policy, freq_table[cur_cluster]);
+ if (ret) {
+ dev_err(cpu_dev, "CPU %d, cluster: %d invalid freq table\n",
+ policy->cpu, cur_cluster);
+ put_cluster_clk_and_freq_table(cpu_dev, policy->cpus);
+ return ret;
+ }
+
if (arm_bL_ops->get_transition_latency)
policy->cpuinfo.transition_latency =
arm_bL_ops->get_transition_latency(cpu_dev);
return -ENODEV;
}
- put_cluster_clk_and_freq_table(cpu_dev);
+ put_cluster_clk_and_freq_table(cpu_dev, policy->related_cpus);
dev_dbg(cpu_dev, "%s: Exited, cpu: %d\n", __func__, policy->cpu);
return 0;
* This must set opp table for cpu_dev in a similar way as done by
* dev_pm_opp_of_add_table().
*/
- int (*init_opp_table)(struct device *cpu_dev);
+ int (*init_opp_table)(const struct cpumask *cpumask);
/* Optional */
int (*get_transition_latency)(struct device *cpu_dev);
- void (*free_opp_table)(struct device *cpu_dev);
+ void (*free_opp_table)(const struct cpumask *cpumask);
};
int bL_cpufreq_register(struct cpufreq_arm_bL_ops *ops);
return np;
}
-static int dt_init_opp_table(struct device *cpu_dev)
-{
- struct device_node *np;
- int ret;
-
- np = of_node_get(cpu_dev->of_node);
- if (!np) {
- pr_err("failed to find cpu%d node\n", cpu_dev->id);
- return -ENOENT;
- }
-
- ret = dev_pm_opp_of_add_table(cpu_dev);
- of_node_put(np);
-
- return ret;
-}
-
static int dt_get_transition_latency(struct device *cpu_dev)
{
struct device_node *np;
static struct cpufreq_arm_bL_ops dt_bL_ops = {
.name = "dt-bl",
.get_transition_latency = dt_get_transition_latency,
- .init_opp_table = dt_init_opp_table,
- .free_opp_table = dev_pm_opp_of_remove_table,
+ .init_opp_table = dev_pm_opp_of_cpumask_add_table,
+ .free_opp_table = dev_pm_opp_of_cpumask_remove_table,
};
static int generic_bL_probe(struct platform_device *pdev)
return -ENODEV;
}
+static void __exit cppc_cpufreq_exit(void)
+{
+ struct cpudata *cpu;
+ int i;
+
+ cpufreq_unregister_driver(&cppc_cpufreq_driver);
+
+ for_each_possible_cpu(i) {
+ cpu = all_cpu_data[i];
+ free_cpumask_var(cpu->shared_cpu_map);
+ kfree(cpu);
+ }
+
+ kfree(all_cpu_data);
+}
+
+module_exit(cppc_cpufreq_exit);
+MODULE_AUTHOR("Ashwin Chaugule");
+MODULE_DESCRIPTION("CPUFreq driver based on the ACPI CPPC v5.0+ spec");
+MODULE_LICENSE("GPL");
+
late_initcall(cppc_cpufreq_init);
--- /dev/null
+/*
+ * Copyright (C) 2016 Linaro.
+ * Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+static const struct of_device_id machines[] __initconst = {
+ { .compatible = "allwinner,sun4i-a10", },
+ { .compatible = "allwinner,sun5i-a10s", },
+ { .compatible = "allwinner,sun5i-a13", },
+ { .compatible = "allwinner,sun5i-r8", },
+ { .compatible = "allwinner,sun6i-a31", },
+ { .compatible = "allwinner,sun6i-a31s", },
+ { .compatible = "allwinner,sun7i-a20", },
+ { .compatible = "allwinner,sun8i-a23", },
+ { .compatible = "allwinner,sun8i-a33", },
+ { .compatible = "allwinner,sun8i-a83t", },
+ { .compatible = "allwinner,sun8i-h3", },
+
+ { .compatible = "hisilicon,hi6220", },
+
+ { .compatible = "fsl,imx27", },
+ { .compatible = "fsl,imx51", },
+ { .compatible = "fsl,imx53", },
+ { .compatible = "fsl,imx7d", },
+
+ { .compatible = "marvell,berlin", },
+
+ { .compatible = "samsung,exynos3250", },
+ { .compatible = "samsung,exynos4210", },
+ { .compatible = "samsung,exynos4212", },
+ { .compatible = "samsung,exynos4412", },
+ { .compatible = "samsung,exynos5250", },
+#ifndef CONFIG_BL_SWITCHER
+ { .compatible = "samsung,exynos5420", },
+ { .compatible = "samsung,exynos5800", },
+#endif
+
+ { .compatible = "renesas,emev2", },
+ { .compatible = "renesas,r7s72100", },
+ { .compatible = "renesas,r8a73a4", },
+ { .compatible = "renesas,r8a7740", },
+ { .compatible = "renesas,r8a7778", },
+ { .compatible = "renesas,r8a7779", },
+ { .compatible = "renesas,r8a7790", },
+ { .compatible = "renesas,r8a7791", },
+ { .compatible = "renesas,r8a7793", },
+ { .compatible = "renesas,r8a7794", },
+ { .compatible = "renesas,sh73a0", },
+
+ { .compatible = "rockchip,rk2928", },
+ { .compatible = "rockchip,rk3036", },
+ { .compatible = "rockchip,rk3066a", },
+ { .compatible = "rockchip,rk3066b", },
+ { .compatible = "rockchip,rk3188", },
+ { .compatible = "rockchip,rk3228", },
+ { .compatible = "rockchip,rk3288", },
+ { .compatible = "rockchip,rk3366", },
+ { .compatible = "rockchip,rk3368", },
+ { .compatible = "rockchip,rk3399", },
+
+ { .compatible = "sigma,tango4" },
+
+ { .compatible = "ti,omap2", },
+ { .compatible = "ti,omap3", },
+ { .compatible = "ti,omap4", },
+ { .compatible = "ti,omap5", },
+
+ { .compatible = "xlnx,zynq-7000", },
+};
+
+static int __init cpufreq_dt_platdev_init(void)
+{
+ struct device_node *np = of_find_node_by_path("/");
+
+ if (!np)
+ return -ENODEV;
+
+ if (!of_match_node(machines, np))
+ return -ENODEV;
+
+ of_node_put(of_root);
+
+ return PTR_ERR_OR_ZERO(platform_device_register_simple("cpufreq-dt", -1,
+ NULL, 0));
+}
+device_initcall(cpufreq_dt_platdev_init);
#include <linux/cpu.h>
#include <linux/cpu_cooling.h>
#include <linux/cpufreq.h>
-#include <linux/cpufreq-dt.h>
#include <linux/cpumask.h>
#include <linux/err.h>
#include <linux/module.h>
struct clk *cpu_clk;
struct dev_pm_opp *suspend_opp;
unsigned int transition_latency;
- bool opp_v1 = false;
+ bool fallback = false;
const char *name;
int ret;
/* Get OPP-sharing information from "operating-points-v2" bindings */
ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, policy->cpus);
if (ret) {
+ if (ret != -ENOENT)
+ goto out_put_clk;
+
/*
* operating-points-v2 not supported, fallback to old method of
- * finding shared-OPPs for backward compatibility.
+ * finding shared-OPPs for backward compatibility if the
+ * platform hasn't set sharing CPUs.
*/
- if (ret == -ENOENT)
- opp_v1 = true;
- else
- goto out_put_clk;
+ if (dev_pm_opp_get_sharing_cpus(cpu_dev, policy->cpus))
+ fallback = true;
}
/*
goto out_free_opp;
}
- if (opp_v1) {
- struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data();
-
- if (!pd || !pd->independent_clocks)
- cpumask_setall(policy->cpus);
+ if (fallback) {
+ cpumask_setall(policy->cpus);
/*
* OPP tables are initialized only for policy->cpu, do it for
* BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
MODULE_PARM_DESC(min_fsb,
"Minimum FSB to use, if not defined: current FSB - 50");
-#define PFX "cpufreq-nforce2: "
-
/**
* nforce2_calc_fsb - calculate FSB
* @pll: PLL value
int pll = 0;
if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) {
- printk(KERN_ERR PFX "FSB %d is out of range!\n", fsb);
+ pr_err("FSB %d is out of range!\n", fsb);
return -EINVAL;
}
tfsb = nforce2_fsb_read(0);
if (!tfsb) {
- printk(KERN_ERR PFX "Error while reading the FSB\n");
+ pr_err("Error while reading the FSB\n");
return -EINVAL;
}
/* local_irq_save(flags); */
if (nforce2_set_fsb(target_fsb) < 0)
- printk(KERN_ERR PFX "Changing FSB to %d failed\n",
- target_fsb);
+ pr_err("Changing FSB to %d failed\n", target_fsb);
else
pr_debug("Changed FSB successfully to %d\n",
target_fsb);
/* FIX: Get FID from CPU */
if (!fid) {
if (!cpu_khz) {
- printk(KERN_WARNING PFX
- "cpu_khz not set, can't calculate multiplier!\n");
+ pr_warn("cpu_khz not set, can't calculate multiplier!\n");
return -ENODEV;
}
}
}
- printk(KERN_INFO PFX "FSB currently at %i MHz, FID %d.%d\n", fsb,
- fid / 10, fid % 10);
+ pr_info("FSB currently at %i MHz, FID %d.%d\n",
+ fsb, fid / 10, fid % 10);
/* Set maximum FSB to FSB at boot time */
max_fsb = nforce2_fsb_read(1);
if (nforce2_dev == NULL)
return -ENODEV;
- printk(KERN_INFO PFX "Detected nForce2 chipset revision %X\n",
- nforce2_dev->revision);
- printk(KERN_INFO PFX
- "FSB changing is maybe unstable and can lead to "
- "crashes and data loss.\n");
+ pr_info("Detected nForce2 chipset revision %X\n",
+ nforce2_dev->revision);
+ pr_info("FSB changing is maybe unstable and can lead to crashes and data loss\n");
return 0;
}
/* detect chipset */
if (nforce2_detect_chipset()) {
- printk(KERN_INFO PFX "No nForce2 chipset.\n");
+ pr_info("No nForce2 chipset\n");
return -ENODEV;
}
static unsigned int __cpufreq_get(struct cpufreq_policy *policy);
static int cpufreq_start_governor(struct cpufreq_policy *policy);
+static inline int cpufreq_exit_governor(struct cpufreq_policy *policy)
+{
+ return cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT);
+}
+
/**
* Two notifier lists: the "policy" list is involved in the
* validation process for a new CPU frequency policy; the
}
EXPORT_SYMBOL_GPL(cpufreq_freq_transition_end);
+/*
+ * Fast frequency switching status count. Positive means "enabled", negative
+ * means "disabled" and 0 means "not decided yet".
+ */
+static int cpufreq_fast_switch_count;
+static DEFINE_MUTEX(cpufreq_fast_switch_lock);
+
+static void cpufreq_list_transition_notifiers(void)
+{
+ struct notifier_block *nb;
+
+ pr_info("Registered transition notifiers:\n");
+
+ mutex_lock(&cpufreq_transition_notifier_list.mutex);
+
+ for (nb = cpufreq_transition_notifier_list.head; nb; nb = nb->next)
+ pr_info("%pF\n", nb->notifier_call);
+
+ mutex_unlock(&cpufreq_transition_notifier_list.mutex);
+}
+
+/**
+ * cpufreq_enable_fast_switch - Enable fast frequency switching for policy.
+ * @policy: cpufreq policy to enable fast frequency switching for.
+ *
+ * Try to enable fast frequency switching for @policy.
+ *
+ * The attempt will fail if there is at least one transition notifier registered
+ * at this point, as fast frequency switching is quite fundamentally at odds
+ * with transition notifiers. Thus if successful, it will make registration of
+ * transition notifiers fail going forward.
+ */
+void cpufreq_enable_fast_switch(struct cpufreq_policy *policy)
+{
+ lockdep_assert_held(&policy->rwsem);
+
+ if (!policy->fast_switch_possible)
+ return;
+
+ mutex_lock(&cpufreq_fast_switch_lock);
+ if (cpufreq_fast_switch_count >= 0) {
+ cpufreq_fast_switch_count++;
+ policy->fast_switch_enabled = true;
+ } else {
+ pr_warn("CPU%u: Fast frequency switching not enabled\n",
+ policy->cpu);
+ cpufreq_list_transition_notifiers();
+ }
+ mutex_unlock(&cpufreq_fast_switch_lock);
+}
+EXPORT_SYMBOL_GPL(cpufreq_enable_fast_switch);
+
+/**
+ * cpufreq_disable_fast_switch - Disable fast frequency switching for policy.
+ * @policy: cpufreq policy to disable fast frequency switching for.
+ */
+void cpufreq_disable_fast_switch(struct cpufreq_policy *policy)
+{
+ mutex_lock(&cpufreq_fast_switch_lock);
+ if (policy->fast_switch_enabled) {
+ policy->fast_switch_enabled = false;
+ if (!WARN_ON(cpufreq_fast_switch_count <= 0))
+ cpufreq_fast_switch_count--;
+ }
+ mutex_unlock(&cpufreq_fast_switch_lock);
+}
+EXPORT_SYMBOL_GPL(cpufreq_disable_fast_switch);
/*********************************************************************
* SYSFS INTERFACE *
*/
static int cpufreq_add_dev(struct device *dev, struct subsys_interface *sif)
{
+ struct cpufreq_policy *policy;
unsigned cpu = dev->id;
- int ret;
dev_dbg(dev, "%s: adding CPU%u\n", __func__, cpu);
- if (cpu_online(cpu)) {
- ret = cpufreq_online(cpu);
- } else {
- /*
- * A hotplug notifier will follow and we will handle it as CPU
- * online then. For now, just create the sysfs link, unless
- * there is no policy or the link is already present.
- */
- struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu);
+ if (cpu_online(cpu))
+ return cpufreq_online(cpu);
- ret = policy && !cpumask_test_and_set_cpu(cpu, policy->real_cpus)
- ? add_cpu_dev_symlink(policy, cpu) : 0;
- }
+ /*
+ * A hotplug notifier will follow and we will handle it as CPU online
+ * then. For now, just create the sysfs link, unless there is no policy
+ * or the link is already present.
+ */
+ policy = per_cpu(cpufreq_cpu_data, cpu);
+ if (!policy || cpumask_test_and_set_cpu(cpu, policy->real_cpus))
+ return 0;
- return ret;
+ return add_cpu_dev_symlink(policy, cpu);
}
static void cpufreq_offline(unsigned int cpu)
/* If cpu is last user of policy, free policy */
if (has_target()) {
- ret = cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT);
+ ret = cpufreq_exit_governor(policy);
if (ret)
pr_err("%s: Failed to exit governor\n", __func__);
}
ret_freq = cpufreq_driver->get(policy->cpu);
- /* Updating inactive policies is invalid, so avoid doing that. */
- if (unlikely(policy_is_inactive(policy)))
+ /*
+ * Updating inactive policies is invalid, so avoid doing that. Also
+ * if fast frequency switching is used with the given policy, the check
+ * against policy->cur is pointless, so skip it in that case too.
+ */
+ if (unlikely(policy_is_inactive(policy)) || policy->fast_switch_enabled)
return ret_freq;
if (ret_freq && policy->cur &&
if (!cpufreq_driver)
return;
- if (!has_target())
+ if (!has_target() && !cpufreq_driver->suspend)
goto suspend;
pr_debug("%s: Suspending Governors\n", __func__);
for_each_active_policy(policy) {
- down_write(&policy->rwsem);
- ret = cpufreq_governor(policy, CPUFREQ_GOV_STOP);
- up_write(&policy->rwsem);
+ if (has_target()) {
+ down_write(&policy->rwsem);
+ ret = cpufreq_governor(policy, CPUFREQ_GOV_STOP);
+ up_write(&policy->rwsem);
- if (ret)
- pr_err("%s: Failed to stop governor for policy: %p\n",
- __func__, policy);
- else if (cpufreq_driver->suspend
- && cpufreq_driver->suspend(policy))
+ if (ret) {
+ pr_err("%s: Failed to stop governor for policy: %p\n",
+ __func__, policy);
+ continue;
+ }
+ }
+
+ if (cpufreq_driver->suspend && cpufreq_driver->suspend(policy))
pr_err("%s: Failed to suspend driver: %p\n", __func__,
policy);
}
cpufreq_suspended = false;
- if (!has_target())
+ if (!has_target() && !cpufreq_driver->resume)
return;
pr_debug("%s: Resuming Governors\n", __func__);
if (cpufreq_driver->resume && cpufreq_driver->resume(policy)) {
pr_err("%s: Failed to resume driver: %p\n", __func__,
policy);
- } else {
+ } else if (has_target()) {
down_write(&policy->rwsem);
ret = cpufreq_start_governor(policy);
up_write(&policy->rwsem);
switch (list) {
case CPUFREQ_TRANSITION_NOTIFIER:
+ mutex_lock(&cpufreq_fast_switch_lock);
+
+ if (cpufreq_fast_switch_count > 0) {
+ mutex_unlock(&cpufreq_fast_switch_lock);
+ return -EBUSY;
+ }
ret = srcu_notifier_chain_register(
&cpufreq_transition_notifier_list, nb);
+ if (!ret)
+ cpufreq_fast_switch_count--;
+
+ mutex_unlock(&cpufreq_fast_switch_lock);
break;
case CPUFREQ_POLICY_NOTIFIER:
ret = blocking_notifier_chain_register(
switch (list) {
case CPUFREQ_TRANSITION_NOTIFIER:
+ mutex_lock(&cpufreq_fast_switch_lock);
+
ret = srcu_notifier_chain_unregister(
&cpufreq_transition_notifier_list, nb);
+ if (!ret && !WARN_ON(cpufreq_fast_switch_count >= 0))
+ cpufreq_fast_switch_count++;
+
+ mutex_unlock(&cpufreq_fast_switch_lock);
break;
case CPUFREQ_POLICY_NOTIFIER:
ret = blocking_notifier_chain_unregister(
* GOVERNORS *
*********************************************************************/
+/**
+ * cpufreq_driver_fast_switch - Carry out a fast CPU frequency switch.
+ * @policy: cpufreq policy to switch the frequency for.
+ * @target_freq: New frequency to set (may be approximate).
+ *
+ * Carry out a fast frequency switch without sleeping.
+ *
+ * The driver's ->fast_switch() callback invoked by this function must be
+ * suitable for being called from within RCU-sched read-side critical sections
+ * and it is expected to select the minimum available frequency greater than or
+ * equal to @target_freq (CPUFREQ_RELATION_L).
+ *
+ * This function must not be called if policy->fast_switch_enabled is unset.
+ *
+ * Governors calling this function must guarantee that it will never be invoked
+ * twice in parallel for the same policy and that it will never be called in
+ * parallel with either ->target() or ->target_index() for the same policy.
+ *
+ * If CPUFREQ_ENTRY_INVALID is returned by the driver's ->fast_switch()
+ * callback to indicate an error condition, the hardware configuration must be
+ * preserved.
+ */
+unsigned int cpufreq_driver_fast_switch(struct cpufreq_policy *policy,
+ unsigned int target_freq)
+{
+ clamp_val(target_freq, policy->min, policy->max);
+
+ return cpufreq_driver->fast_switch(policy, target_freq);
+}
+EXPORT_SYMBOL_GPL(cpufreq_driver_fast_switch);
+
/* Must set freqs->new to intermediate frequency */
static int __target_intermediate(struct cpufreq_policy *policy,
struct cpufreq_freqs *freqs, int index)
return ret;
}
- ret = cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT);
+ ret = cpufreq_exit_governor(policy);
if (ret) {
pr_err("%s: Failed to Exit Governor: %s (%d)\n",
__func__, old_gov->name, ret);
pr_debug("cpufreq: governor change\n");
return 0;
}
- cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT);
+ cpufreq_exit_governor(policy);
}
/* new governor failed, so re-start old one */
switch (action & ~CPU_TASKS_FROZEN) {
case CPU_ONLINE:
+ case CPU_DOWN_FAILED:
cpufreq_online(cpu);
break;
case CPU_DOWN_PREPARE:
cpufreq_offline(cpu);
break;
-
- case CPU_DOWN_FAILED:
- cpufreq_online(cpu);
- break;
}
return NOTIFY_OK;
}
/************************** sysfs interface ************************/
static struct dbs_governor cs_dbs_gov;
-static ssize_t store_sampling_down_factor(struct dbs_data *dbs_data,
- const char *buf, size_t count)
+static ssize_t store_sampling_down_factor(struct gov_attr_set *attr_set,
+ const char *buf, size_t count)
{
+ struct dbs_data *dbs_data = to_dbs_data(attr_set);
unsigned int input;
int ret;
ret = sscanf(buf, "%u", &input);
return count;
}
-static ssize_t store_up_threshold(struct dbs_data *dbs_data, const char *buf,
- size_t count)
+static ssize_t store_up_threshold(struct gov_attr_set *attr_set,
+ const char *buf, size_t count)
{
+ struct dbs_data *dbs_data = to_dbs_data(attr_set);
struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
unsigned int input;
int ret;
return count;
}
-static ssize_t store_down_threshold(struct dbs_data *dbs_data, const char *buf,
- size_t count)
+static ssize_t store_down_threshold(struct gov_attr_set *attr_set,
+ const char *buf, size_t count)
{
+ struct dbs_data *dbs_data = to_dbs_data(attr_set);
struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
unsigned int input;
int ret;
return count;
}
-static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data,
- const char *buf, size_t count)
+static ssize_t store_ignore_nice_load(struct gov_attr_set *attr_set,
+ const char *buf, size_t count)
{
+ struct dbs_data *dbs_data = to_dbs_data(attr_set);
unsigned int input;
int ret;
return count;
}
-static ssize_t store_freq_step(struct dbs_data *dbs_data, const char *buf,
- size_t count)
+static ssize_t store_freq_step(struct gov_attr_set *attr_set, const char *buf,
+ size_t count)
{
+ struct dbs_data *dbs_data = to_dbs_data(attr_set);
struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
unsigned int input;
int ret;
* This must be called with dbs_data->mutex held, otherwise traversing
* policy_dbs_list isn't safe.
*/
-ssize_t store_sampling_rate(struct dbs_data *dbs_data, const char *buf,
+ssize_t store_sampling_rate(struct gov_attr_set *attr_set, const char *buf,
size_t count)
{
+ struct dbs_data *dbs_data = to_dbs_data(attr_set);
struct policy_dbs_info *policy_dbs;
unsigned int rate;
int ret;
* We are operating under dbs_data->mutex and so the list and its
* entries can't be freed concurrently.
*/
- list_for_each_entry(policy_dbs, &dbs_data->policy_dbs_list, list) {
+ list_for_each_entry(policy_dbs, &attr_set->policy_list, list) {
mutex_lock(&policy_dbs->timer_mutex);
/*
* On 32-bit architectures this may race with the
{
struct policy_dbs_info *policy_dbs;
- list_for_each_entry(policy_dbs, &dbs_data->policy_dbs_list, list) {
+ list_for_each_entry(policy_dbs, &dbs_data->attr_set.policy_list, list) {
unsigned int j;
for_each_cpu(j, policy_dbs->policy->cpus) {
struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j);
- j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_cpu_wall,
+ j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_update_time,
dbs_data->io_is_busy);
if (dbs_data->ignore_nice_load)
j_cdbs->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
}
EXPORT_SYMBOL_GPL(gov_update_cpu_data);
-static inline struct dbs_data *to_dbs_data(struct kobject *kobj)
-{
- return container_of(kobj, struct dbs_data, kobj);
-}
-
-static inline struct governor_attr *to_gov_attr(struct attribute *attr)
-{
- return container_of(attr, struct governor_attr, attr);
-}
-
-static ssize_t governor_show(struct kobject *kobj, struct attribute *attr,
- char *buf)
-{
- struct dbs_data *dbs_data = to_dbs_data(kobj);
- struct governor_attr *gattr = to_gov_attr(attr);
-
- return gattr->show(dbs_data, buf);
-}
-
-static ssize_t governor_store(struct kobject *kobj, struct attribute *attr,
- const char *buf, size_t count)
-{
- struct dbs_data *dbs_data = to_dbs_data(kobj);
- struct governor_attr *gattr = to_gov_attr(attr);
- int ret = -EBUSY;
-
- mutex_lock(&dbs_data->mutex);
-
- if (dbs_data->usage_count)
- ret = gattr->store(dbs_data, buf, count);
-
- mutex_unlock(&dbs_data->mutex);
-
- return ret;
-}
-
-/*
- * Sysfs Ops for accessing governor attributes.
- *
- * All show/store invocations for governor specific sysfs attributes, will first
- * call the below show/store callbacks and the attribute specific callback will
- * be called from within it.
- */
-static const struct sysfs_ops governor_sysfs_ops = {
- .show = governor_show,
- .store = governor_store,
-};
-
unsigned int dbs_update(struct cpufreq_policy *policy)
{
struct policy_dbs_info *policy_dbs = policy->governor_data;
/* Get Absolute Load */
for_each_cpu(j, policy->cpus) {
struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j);
- u64 cur_wall_time, cur_idle_time;
- unsigned int idle_time, wall_time;
+ u64 update_time, cur_idle_time;
+ unsigned int idle_time, time_elapsed;
unsigned int load;
- cur_idle_time = get_cpu_idle_time(j, &cur_wall_time, io_busy);
+ cur_idle_time = get_cpu_idle_time(j, &update_time, io_busy);
- wall_time = cur_wall_time - j_cdbs->prev_cpu_wall;
- j_cdbs->prev_cpu_wall = cur_wall_time;
+ time_elapsed = update_time - j_cdbs->prev_update_time;
+ j_cdbs->prev_update_time = update_time;
- if (cur_idle_time <= j_cdbs->prev_cpu_idle) {
- idle_time = 0;
- } else {
- idle_time = cur_idle_time - j_cdbs->prev_cpu_idle;
- j_cdbs->prev_cpu_idle = cur_idle_time;
- }
+ idle_time = cur_idle_time - j_cdbs->prev_cpu_idle;
+ j_cdbs->prev_cpu_idle = cur_idle_time;
if (ignore_nice) {
u64 cur_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
j_cdbs->prev_cpu_nice = cur_nice;
}
- if (unlikely(!wall_time || wall_time < idle_time))
- continue;
-
- /*
- * If the CPU had gone completely idle, and a task just woke up
- * on this CPU now, it would be unfair to calculate 'load' the
- * usual way for this elapsed time-window, because it will show
- * near-zero load, irrespective of how CPU intensive that task
- * actually is. This is undesirable for latency-sensitive bursty
- * workloads.
- *
- * To avoid this, we reuse the 'load' from the previous
- * time-window and give this task a chance to start with a
- * reasonably high CPU frequency. (However, we shouldn't over-do
- * this copy, lest we get stuck at a high load (high frequency)
- * for too long, even when the current system load has actually
- * dropped down. So we perform the copy only once, upon the
- * first wake-up from idle.)
- *
- * Detecting this situation is easy: the governor's utilization
- * update handler would not have run during CPU-idle periods.
- * Hence, an unusually large 'wall_time' (as compared to the
- * sampling rate) indicates this scenario.
- *
- * prev_load can be zero in two cases and we must recalculate it
- * for both cases:
- * - during long idle intervals
- * - explicitly set to zero
- */
- if (unlikely(wall_time > (2 * sampling_rate) &&
- j_cdbs->prev_load)) {
+ if (unlikely(!time_elapsed)) {
+ /*
+ * That can only happen when this function is called
+ * twice in a row with a very short interval between the
+ * calls, so the previous load value can be used then.
+ */
load = j_cdbs->prev_load;
-
+ } else if (unlikely(time_elapsed > 2 * sampling_rate &&
+ j_cdbs->prev_load)) {
/*
- * Perform a destructive copy, to ensure that we copy
- * the previous load only once, upon the first wake-up
- * from idle.
+ * If the CPU had gone completely idle and a task has
+ * just woken up on this CPU now, it would be unfair to
+ * calculate 'load' the usual way for this elapsed
+ * time-window, because it would show near-zero load,
+ * irrespective of how CPU intensive that task actually
+ * was. This is undesirable for latency-sensitive bursty
+ * workloads.
+ *
+ * To avoid this, reuse the 'load' from the previous
+ * time-window and give this task a chance to start with
+ * a reasonably high CPU frequency. However, that
+ * shouldn't be over-done, lest we get stuck at a high
+ * load (high frequency) for too long, even when the
+ * current system load has actually dropped down, so
+ * clear prev_load to guarantee that the load will be
+ * computed again next time.
+ *
+ * Detecting this situation is easy: the governor's
+ * utilization update handler would not have run during
+ * CPU-idle periods. Hence, an unusually large
+ * 'time_elapsed' (as compared to the sampling rate)
+ * indicates this scenario.
*/
+ load = j_cdbs->prev_load;
j_cdbs->prev_load = 0;
} else {
- load = 100 * (wall_time - idle_time) / wall_time;
+ if (time_elapsed >= idle_time) {
+ load = 100 * (time_elapsed - idle_time) / time_elapsed;
+ } else {
+ /*
+ * That can happen if idle_time is returned by
+ * get_cpu_idle_time_jiffy(). In that case
+ * idle_time is roughly equal to the difference
+ * between time_elapsed and "busy time" obtained
+ * from CPU statistics. Then, the "busy time"
+ * can end up being greater than time_elapsed
+ * (for example, if jiffies_64 and the CPU
+ * statistics are updated by different CPUs),
+ * so idle_time may in fact be negative. That
+ * means, though, that the CPU was busy all
+ * the time (on the rough average) during the
+ * last sampling interval and 100 can be
+ * returned as the load.
+ */
+ load = (int)idle_time < 0 ? 100 : 0;
+ }
j_cdbs->prev_load = load;
}
}
EXPORT_SYMBOL_GPL(dbs_update);
-static void gov_set_update_util(struct policy_dbs_info *policy_dbs,
- unsigned int delay_us)
-{
- struct cpufreq_policy *policy = policy_dbs->policy;
- int cpu;
-
- gov_update_sample_delay(policy_dbs, delay_us);
- policy_dbs->last_sample_time = 0;
-
- for_each_cpu(cpu, policy->cpus) {
- struct cpu_dbs_info *cdbs = &per_cpu(cpu_dbs, cpu);
-
- cpufreq_set_update_util_data(cpu, &cdbs->update_util);
- }
-}
-
-static inline void gov_clear_update_util(struct cpufreq_policy *policy)
-{
- int i;
-
- for_each_cpu(i, policy->cpus)
- cpufreq_set_update_util_data(i, NULL);
-
- synchronize_sched();
-}
-
-static void gov_cancel_work(struct cpufreq_policy *policy)
-{
- struct policy_dbs_info *policy_dbs = policy->governor_data;
-
- gov_clear_update_util(policy_dbs->policy);
- irq_work_sync(&policy_dbs->irq_work);
- cancel_work_sync(&policy_dbs->work);
- atomic_set(&policy_dbs->work_count, 0);
- policy_dbs->work_in_progress = false;
-}
-
static void dbs_work_handler(struct work_struct *work)
{
struct policy_dbs_info *policy_dbs;
irq_work_queue(&policy_dbs->irq_work);
}
+static void gov_set_update_util(struct policy_dbs_info *policy_dbs,
+ unsigned int delay_us)
+{
+ struct cpufreq_policy *policy = policy_dbs->policy;
+ int cpu;
+
+ gov_update_sample_delay(policy_dbs, delay_us);
+ policy_dbs->last_sample_time = 0;
+
+ for_each_cpu(cpu, policy->cpus) {
+ struct cpu_dbs_info *cdbs = &per_cpu(cpu_dbs, cpu);
+
+ cpufreq_add_update_util_hook(cpu, &cdbs->update_util,
+ dbs_update_util_handler);
+ }
+}
+
+static inline void gov_clear_update_util(struct cpufreq_policy *policy)
+{
+ int i;
+
+ for_each_cpu(i, policy->cpus)
+ cpufreq_remove_update_util_hook(i);
+
+ synchronize_sched();
+}
+
+static void gov_cancel_work(struct cpufreq_policy *policy)
+{
+ struct policy_dbs_info *policy_dbs = policy->governor_data;
+
+ gov_clear_update_util(policy_dbs->policy);
+ irq_work_sync(&policy_dbs->irq_work);
+ cancel_work_sync(&policy_dbs->work);
+ atomic_set(&policy_dbs->work_count, 0);
+ policy_dbs->work_in_progress = false;
+}
+
static struct policy_dbs_info *alloc_policy_dbs_info(struct cpufreq_policy *policy,
struct dbs_governor *gov)
{
struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j);
j_cdbs->policy_dbs = policy_dbs;
- j_cdbs->update_util.func = dbs_update_util_handler;
}
return policy_dbs;
}
policy_dbs->dbs_data = dbs_data;
policy->governor_data = policy_dbs;
- mutex_lock(&dbs_data->mutex);
- dbs_data->usage_count++;
- list_add(&policy_dbs->list, &dbs_data->policy_dbs_list);
- mutex_unlock(&dbs_data->mutex);
+ gov_attr_set_get(&dbs_data->attr_set, &policy_dbs->list);
goto out;
}
goto free_policy_dbs_info;
}
- INIT_LIST_HEAD(&dbs_data->policy_dbs_list);
- mutex_init(&dbs_data->mutex);
+ gov_attr_set_init(&dbs_data->attr_set, &policy_dbs->list);
ret = gov->init(dbs_data, !policy->governor->initialized);
if (ret)
if (!have_governor_per_policy())
gov->gdbs_data = dbs_data;
- policy->governor_data = policy_dbs;
-
policy_dbs->dbs_data = dbs_data;
- dbs_data->usage_count = 1;
- list_add(&policy_dbs->list, &dbs_data->policy_dbs_list);
+ policy->governor_data = policy_dbs;
gov->kobj_type.sysfs_ops = &governor_sysfs_ops;
- ret = kobject_init_and_add(&dbs_data->kobj, &gov->kobj_type,
+ ret = kobject_init_and_add(&dbs_data->attr_set.kobj, &gov->kobj_type,
get_governor_parent_kobj(policy),
"%s", gov->gov.name);
if (!ret)
struct dbs_governor *gov = dbs_governor_of(policy);
struct policy_dbs_info *policy_dbs = policy->governor_data;
struct dbs_data *dbs_data = policy_dbs->dbs_data;
- int count;
+ unsigned int count;
/* Protect gov->gdbs_data against concurrent updates. */
mutex_lock(&gov_dbs_data_mutex);
- mutex_lock(&dbs_data->mutex);
- list_del(&policy_dbs->list);
- count = --dbs_data->usage_count;
- mutex_unlock(&dbs_data->mutex);
+ count = gov_attr_set_put(&dbs_data->attr_set, &policy_dbs->list);
- if (!count) {
- kobject_put(&dbs_data->kobj);
-
- policy->governor_data = NULL;
+ policy->governor_data = NULL;
+ if (!count) {
if (!have_governor_per_policy())
gov->gdbs_data = NULL;
gov->exit(dbs_data, policy->governor->initialized == 1);
- mutex_destroy(&dbs_data->mutex);
kfree(dbs_data);
- } else {
- policy->governor_data = NULL;
}
free_policy_dbs_info(policy_dbs, gov);
for_each_cpu(j, policy->cpus) {
struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j);
- unsigned int prev_load;
- j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_cpu_wall, io_busy);
-
- prev_load = j_cdbs->prev_cpu_wall - j_cdbs->prev_cpu_idle;
- j_cdbs->prev_load = 100 * prev_load / (unsigned int)j_cdbs->prev_cpu_wall;
+ j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_update_time, io_busy);
+ /*
+ * Make the first invocation of dbs_update() compute the load.
+ */
+ j_cdbs->prev_load = 0;
if (ignore_nice)
j_cdbs->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
#include <linux/module.h>
#include <linux/mutex.h>
-/*
- * The polling frequency depends on the capability of the processor. Default
- * polling frequency is 1000 times the transition latency of the processor. The
- * governor will work on any processor with transition latency <= 10ms, using
- * appropriate sampling rate.
- *
- * For CPUs with transition latency > 10ms (mostly drivers with CPUFREQ_ETERNAL)
- * this governor will not work. All times here are in us (micro seconds).
- */
-#define MIN_SAMPLING_RATE_RATIO (2)
-#define LATENCY_MULTIPLIER (1000)
-#define MIN_LATENCY_MULTIPLIER (20)
-#define TRANSITION_LATENCY_LIMIT (10 * 1000 * 1000)
-
/* Ondemand Sampling types */
enum {OD_NORMAL_SAMPLE, OD_SUB_SAMPLE};
/* Governor demand based switching data (per-policy or global). */
struct dbs_data {
- int usage_count;
+ struct gov_attr_set attr_set;
void *tuners;
unsigned int min_sampling_rate;
unsigned int ignore_nice_load;
unsigned int sampling_down_factor;
unsigned int up_threshold;
unsigned int io_is_busy;
-
- struct kobject kobj;
- struct list_head policy_dbs_list;
- /*
- * Protect concurrent updates to governor tunables from sysfs,
- * policy_dbs_list and usage_count.
- */
- struct mutex mutex;
};
-/* Governor's specific attributes */
-struct dbs_data;
-struct governor_attr {
- struct attribute attr;
- ssize_t (*show)(struct dbs_data *dbs_data, char *buf);
- ssize_t (*store)(struct dbs_data *dbs_data, const char *buf,
- size_t count);
-};
+static inline struct dbs_data *to_dbs_data(struct gov_attr_set *attr_set)
+{
+ return container_of(attr_set, struct dbs_data, attr_set);
+}
#define gov_show_one(_gov, file_name) \
static ssize_t show_##file_name \
-(struct dbs_data *dbs_data, char *buf) \
+(struct gov_attr_set *attr_set, char *buf) \
{ \
+ struct dbs_data *dbs_data = to_dbs_data(attr_set); \
struct _gov##_dbs_tuners *tuners = dbs_data->tuners; \
return sprintf(buf, "%u\n", tuners->file_name); \
}
#define gov_show_one_common(file_name) \
static ssize_t show_##file_name \
-(struct dbs_data *dbs_data, char *buf) \
+(struct gov_attr_set *attr_set, char *buf) \
{ \
+ struct dbs_data *dbs_data = to_dbs_data(attr_set); \
return sprintf(buf, "%u\n", dbs_data->file_name); \
}
/* Per cpu structures */
struct cpu_dbs_info {
u64 prev_cpu_idle;
- u64 prev_cpu_wall;
+ u64 prev_update_time;
u64 prev_cpu_nice;
/*
* Used to keep track of load in the previous interval. However, when
(struct cpufreq_policy *, unsigned int, unsigned int),
unsigned int powersave_bias);
void od_unregister_powersave_bias_handler(void);
-ssize_t store_sampling_rate(struct dbs_data *dbs_data, const char *buf,
+ssize_t store_sampling_rate(struct gov_attr_set *attr_set, const char *buf,
size_t count);
void gov_update_cpu_data(struct dbs_data *dbs_data);
#endif /* _CPUFREQ_GOVERNOR_H */
--- /dev/null
+/*
+ * Abstract code for CPUFreq governor tunable sysfs attributes.
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "cpufreq_governor.h"
+
+static inline struct gov_attr_set *to_gov_attr_set(struct kobject *kobj)
+{
+ return container_of(kobj, struct gov_attr_set, kobj);
+}
+
+static inline struct governor_attr *to_gov_attr(struct attribute *attr)
+{
+ return container_of(attr, struct governor_attr, attr);
+}
+
+static ssize_t governor_show(struct kobject *kobj, struct attribute *attr,
+ char *buf)
+{
+ struct governor_attr *gattr = to_gov_attr(attr);
+
+ return gattr->show(to_gov_attr_set(kobj), buf);
+}
+
+static ssize_t governor_store(struct kobject *kobj, struct attribute *attr,
+ const char *buf, size_t count)
+{
+ struct gov_attr_set *attr_set = to_gov_attr_set(kobj);
+ struct governor_attr *gattr = to_gov_attr(attr);
+ int ret;
+
+ mutex_lock(&attr_set->update_lock);
+ ret = attr_set->usage_count ? gattr->store(attr_set, buf, count) : -EBUSY;
+ mutex_unlock(&attr_set->update_lock);
+ return ret;
+}
+
+const struct sysfs_ops governor_sysfs_ops = {
+ .show = governor_show,
+ .store = governor_store,
+};
+EXPORT_SYMBOL_GPL(governor_sysfs_ops);
+
+void gov_attr_set_init(struct gov_attr_set *attr_set, struct list_head *list_node)
+{
+ INIT_LIST_HEAD(&attr_set->policy_list);
+ mutex_init(&attr_set->update_lock);
+ attr_set->usage_count = 1;
+ list_add(list_node, &attr_set->policy_list);
+}
+EXPORT_SYMBOL_GPL(gov_attr_set_init);
+
+void gov_attr_set_get(struct gov_attr_set *attr_set, struct list_head *list_node)
+{
+ mutex_lock(&attr_set->update_lock);
+ attr_set->usage_count++;
+ list_add(list_node, &attr_set->policy_list);
+ mutex_unlock(&attr_set->update_lock);
+}
+EXPORT_SYMBOL_GPL(gov_attr_set_get);
+
+unsigned int gov_attr_set_put(struct gov_attr_set *attr_set, struct list_head *list_node)
+{
+ unsigned int count;
+
+ mutex_lock(&attr_set->update_lock);
+ list_del(list_node);
+ count = --attr_set->usage_count;
+ mutex_unlock(&attr_set->update_lock);
+ if (count)
+ return count;
+
+ kobject_put(&attr_set->kobj);
+ mutex_destroy(&attr_set->update_lock);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(gov_attr_set_put);
/************************** sysfs interface ************************/
static struct dbs_governor od_dbs_gov;
-static ssize_t store_io_is_busy(struct dbs_data *dbs_data, const char *buf,
- size_t count)
+static ssize_t store_io_is_busy(struct gov_attr_set *attr_set, const char *buf,
+ size_t count)
{
+ struct dbs_data *dbs_data = to_dbs_data(attr_set);
unsigned int input;
int ret;
return count;
}
-static ssize_t store_up_threshold(struct dbs_data *dbs_data, const char *buf,
- size_t count)
+static ssize_t store_up_threshold(struct gov_attr_set *attr_set,
+ const char *buf, size_t count)
{
+ struct dbs_data *dbs_data = to_dbs_data(attr_set);
unsigned int input;
int ret;
ret = sscanf(buf, "%u", &input);
return count;
}
-static ssize_t store_sampling_down_factor(struct dbs_data *dbs_data,
- const char *buf, size_t count)
+static ssize_t store_sampling_down_factor(struct gov_attr_set *attr_set,
+ const char *buf, size_t count)
{
+ struct dbs_data *dbs_data = to_dbs_data(attr_set);
struct policy_dbs_info *policy_dbs;
unsigned int input;
int ret;
dbs_data->sampling_down_factor = input;
/* Reset down sampling multiplier in case it was active */
- list_for_each_entry(policy_dbs, &dbs_data->policy_dbs_list, list) {
+ list_for_each_entry(policy_dbs, &attr_set->policy_list, list) {
/*
* Doing this without locking might lead to using different
* rate_mult values in od_update() and od_dbs_timer().
return count;
}
-static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data,
- const char *buf, size_t count)
+static ssize_t store_ignore_nice_load(struct gov_attr_set *attr_set,
+ const char *buf, size_t count)
{
+ struct dbs_data *dbs_data = to_dbs_data(attr_set);
unsigned int input;
int ret;
return count;
}
-static ssize_t store_powersave_bias(struct dbs_data *dbs_data, const char *buf,
- size_t count)
+static ssize_t store_powersave_bias(struct gov_attr_set *attr_set,
+ const char *buf, size_t count)
{
+ struct dbs_data *dbs_data = to_dbs_data(attr_set);
struct od_dbs_tuners *od_tuners = dbs_data->tuners;
struct policy_dbs_info *policy_dbs;
unsigned int input;
od_tuners->powersave_bias = input;
- list_for_each_entry(policy_dbs, &dbs_data->policy_dbs_list, list)
+ list_for_each_entry(policy_dbs, &attr_set->policy_list, list)
ondemand_powersave_bias_init(policy_dbs->policy);
return count;
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
static DEFINE_PER_CPU(unsigned int, cpu_is_managed);
static DEFINE_MUTEX(userspace_mutex);
static int cpufreq_set(struct cpufreq_policy *policy, unsigned int freq)
{
int ret = -EINVAL;
+ unsigned int *setspeed = policy->governor_data;
pr_debug("cpufreq_set for cpu %u, freq %u kHz\n", policy->cpu, freq);
if (!per_cpu(cpu_is_managed, policy->cpu))
goto err;
+ *setspeed = freq;
+
ret = __cpufreq_driver_target(policy, freq, CPUFREQ_RELATION_L);
err:
mutex_unlock(&userspace_mutex);
return sprintf(buf, "%u\n", policy->cur);
}
+static int cpufreq_userspace_policy_init(struct cpufreq_policy *policy)
+{
+ unsigned int *setspeed;
+
+ setspeed = kzalloc(sizeof(*setspeed), GFP_KERNEL);
+ if (!setspeed)
+ return -ENOMEM;
+
+ policy->governor_data = setspeed;
+ return 0;
+}
+
static int cpufreq_governor_userspace(struct cpufreq_policy *policy,
unsigned int event)
{
+ unsigned int *setspeed = policy->governor_data;
unsigned int cpu = policy->cpu;
int rc = 0;
+ if (event == CPUFREQ_GOV_POLICY_INIT)
+ return cpufreq_userspace_policy_init(policy);
+
+ if (!setspeed)
+ return -EINVAL;
+
switch (event) {
+ case CPUFREQ_GOV_POLICY_EXIT:
+ mutex_lock(&userspace_mutex);
+ policy->governor_data = NULL;
+ kfree(setspeed);
+ mutex_unlock(&userspace_mutex);
+ break;
case CPUFREQ_GOV_START:
BUG_ON(!policy->cur);
pr_debug("started managing cpu %u\n", cpu);
mutex_lock(&userspace_mutex);
per_cpu(cpu_is_managed, cpu) = 1;
+ *setspeed = policy->cur;
mutex_unlock(&userspace_mutex);
break;
case CPUFREQ_GOV_STOP:
mutex_lock(&userspace_mutex);
per_cpu(cpu_is_managed, cpu) = 0;
+ *setspeed = 0;
mutex_unlock(&userspace_mutex);
break;
case CPUFREQ_GOV_LIMITS:
mutex_lock(&userspace_mutex);
- pr_debug("limit event for cpu %u: %u - %u kHz, currently %u kHz\n",
- cpu, policy->min, policy->max,
- policy->cur);
+ pr_debug("limit event for cpu %u: %u - %u kHz, currently %u kHz, last set to %u kHz\n",
+ cpu, policy->min, policy->max, policy->cur, *setspeed);
- if (policy->max < policy->cur)
+ if (policy->max < *setspeed)
__cpufreq_driver_target(policy, policy->max,
CPUFREQ_RELATION_H);
- else if (policy->min > policy->cur)
+ else if (policy->min > *setspeed)
__cpufreq_driver_target(policy, policy->min,
CPUFREQ_RELATION_L);
+ else
+ __cpufreq_driver_target(policy, *setspeed,
+ CPUFREQ_RELATION_L);
mutex_unlock(&userspace_mutex);
break;
}
* BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <asm/msr.h>
#include <asm/tsc.h>
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
#include <linux/acpi.h>
#include <acpi/processor.h>
#endif
struct eps_cpu_data {
u32 fsb;
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
u32 bios_limit;
#endif
struct cpufreq_frequency_table freq_table[];
static int voltage_failsafe_off;
static int set_max_voltage;
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
static int ignore_acpi_limit;
static struct acpi_processor_performance *eps_acpi_cpu_perf;
/* Print voltage and multiplier */
rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
current_voltage = lo & 0xff;
- printk(KERN_INFO "eps: Current voltage = %dmV\n",
- current_voltage * 16 + 700);
+ pr_info("Current voltage = %dmV\n", current_voltage * 16 + 700);
current_multiplier = (lo >> 8) & 0xff;
- printk(KERN_INFO "eps: Current multiplier = %d\n",
- current_multiplier);
+ pr_info("Current multiplier = %d\n", current_multiplier);
}
#endif
return 0;
dest_state = centaur->freq_table[index].driver_data & 0xffff;
ret = eps_set_state(centaur, policy, dest_state);
if (ret)
- printk(KERN_ERR "eps: Timeout!\n");
+ pr_err("Timeout!\n");
return ret;
}
int k, step, voltage;
int ret;
int states;
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
unsigned int limit;
#endif
return -ENODEV;
/* Check brand */
- printk(KERN_INFO "eps: Detected VIA ");
+ pr_info("Detected VIA ");
switch (c->x86_model) {
case 10:
rdmsr(0x1153, lo, hi);
brand = (((lo >> 2) ^ lo) >> 18) & 3;
- printk(KERN_CONT "Model A ");
+ pr_cont("Model A ");
break;
case 13:
rdmsr(0x1154, lo, hi);
brand = (((lo >> 4) ^ (lo >> 2))) & 0x000000ff;
- printk(KERN_CONT "Model D ");
+ pr_cont("Model D ");
break;
}
switch (brand) {
case EPS_BRAND_C7M:
- printk(KERN_CONT "C7-M\n");
+ pr_cont("C7-M\n");
break;
case EPS_BRAND_C7:
- printk(KERN_CONT "C7\n");
+ pr_cont("C7\n");
break;
case EPS_BRAND_EDEN:
- printk(KERN_CONT "Eden\n");
+ pr_cont("Eden\n");
break;
case EPS_BRAND_C7D:
- printk(KERN_CONT "C7-D\n");
+ pr_cont("C7-D\n");
break;
case EPS_BRAND_C3:
- printk(KERN_CONT "C3\n");
+ pr_cont("C3\n");
return -ENODEV;
break;
}
/* Can be locked at 0 */
rdmsrl(MSR_IA32_MISC_ENABLE, val);
if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
- printk(KERN_INFO "eps: Can't enable Enhanced PowerSaver\n");
+ pr_info("Can't enable Enhanced PowerSaver\n");
return -ENODEV;
}
}
/* Print voltage and multiplier */
rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
current_voltage = lo & 0xff;
- printk(KERN_INFO "eps: Current voltage = %dmV\n",
- current_voltage * 16 + 700);
+ pr_info("Current voltage = %dmV\n", current_voltage * 16 + 700);
current_multiplier = (lo >> 8) & 0xff;
- printk(KERN_INFO "eps: Current multiplier = %d\n", current_multiplier);
+ pr_info("Current multiplier = %d\n", current_multiplier);
/* Print limits */
max_voltage = hi & 0xff;
- printk(KERN_INFO "eps: Highest voltage = %dmV\n",
- max_voltage * 16 + 700);
+ pr_info("Highest voltage = %dmV\n", max_voltage * 16 + 700);
max_multiplier = (hi >> 8) & 0xff;
- printk(KERN_INFO "eps: Highest multiplier = %d\n", max_multiplier);
+ pr_info("Highest multiplier = %d\n", max_multiplier);
min_voltage = (hi >> 16) & 0xff;
- printk(KERN_INFO "eps: Lowest voltage = %dmV\n",
- min_voltage * 16 + 700);
+ pr_info("Lowest voltage = %dmV\n", min_voltage * 16 + 700);
min_multiplier = (hi >> 24) & 0xff;
- printk(KERN_INFO "eps: Lowest multiplier = %d\n", min_multiplier);
+ pr_info("Lowest multiplier = %d\n", min_multiplier);
/* Sanity checks */
if (current_multiplier == 0 || max_multiplier == 0
/* Check for systems using underclocked CPU */
if (!freq_failsafe_off && max_multiplier != current_multiplier) {
- printk(KERN_INFO "eps: Your processor is running at different "
- "frequency then its maximum. Aborting.\n");
- printk(KERN_INFO "eps: You can use freq_failsafe_off option "
- "to disable this check.\n");
+ pr_info("Your processor is running at different frequency then its maximum. Aborting.\n");
+ pr_info("You can use freq_failsafe_off option to disable this check.\n");
return -EINVAL;
}
if (!voltage_failsafe_off && max_voltage != current_voltage) {
- printk(KERN_INFO "eps: Your processor is running at different "
- "voltage then its maximum. Aborting.\n");
- printk(KERN_INFO "eps: You can use voltage_failsafe_off "
- "option to disable this check.\n");
+ pr_info("Your processor is running at different voltage then its maximum. Aborting.\n");
+ pr_info("You can use voltage_failsafe_off option to disable this check.\n");
return -EINVAL;
}
/* Calc FSB speed */
fsb = cpu_khz / current_multiplier;
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
/* Check for ACPI processor speed limit */
if (!ignore_acpi_limit && !eps_acpi_init()) {
if (!acpi_processor_get_bios_limit(policy->cpu, &limit)) {
- printk(KERN_INFO "eps: ACPI limit %u.%uGHz\n",
+ pr_info("ACPI limit %u.%uGHz\n",
limit/1000000,
(limit%1000000)/10000);
eps_acpi_exit(policy);
/* Check if max_multiplier is in BIOS limits */
if (limit && max_multiplier * fsb > limit) {
- printk(KERN_INFO "eps: Aborting.\n");
+ pr_info("Aborting\n");
return -EINVAL;
}
}
v = (set_max_voltage - 700) / 16;
/* Check if voltage is within limits */
if (v >= min_voltage && v <= max_voltage) {
- printk(KERN_INFO "eps: Setting %dmV as maximum.\n",
- v * 16 + 700);
+ pr_info("Setting %dmV as maximum\n", v * 16 + 700);
max_voltage = v;
}
}
/* Copy basic values */
centaur->fsb = fsb;
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
centaur->bios_limit = limit;
#endif
MODULE_PARM_DESC(freq_failsafe_off, "Disable current vs max frequency check");
module_param(voltage_failsafe_off, int, 0644);
MODULE_PARM_DESC(voltage_failsafe_off, "Disable current vs max voltage check");
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
module_param(ignore_acpi_limit, int, 0644);
MODULE_PARM_DESC(ignore_acpi_limit, "Don't check ACPI's processor speed limit");
#endif
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
static int __init elanfreq_setup(char *str)
{
max_freq = simple_strtoul(str, &str, 0);
- printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
+ pr_warn("You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
return 1;
}
__setup("elanfreq=", elanfreq_setup);
+++ /dev/null
-/*
- * Hisilicon Platforms Using ACPU CPUFreq Support
- *
- * Copyright (c) 2015 Hisilicon Limited.
- * Copyright (c) 2015 Linaro Limited.
- *
- * Leo Yan <leo.yan@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-
-static int __init hisi_acpu_cpufreq_driver_init(void)
-{
- struct platform_device *pdev;
-
- if (!of_machine_is_compatible("hisilicon,hi6220"))
- return -ENODEV;
-
- pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
- return PTR_ERR_OR_ZERO(pdev);
-}
-module_init(hisi_acpu_cpufreq_driver_init);
-
-MODULE_AUTHOR("Leo Yan <leo.yan@linaro.org>");
-MODULE_DESCRIPTION("Hisilicon acpu cpufreq driver");
-MODULE_LICENSE("GPL v2");
* Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/module.h>
if (ret) {
set_cpus_allowed_ptr(current, &saved_mask);
- printk(KERN_WARNING "get performance failed with error %d\n",
- ret);
+ pr_warn("get performance failed with error %d\n", ret);
ret = 0;
goto migrate_end;
}
ret = processor_set_pstate(value);
if (ret) {
- printk(KERN_WARNING "Transition failed with error %d\n", ret);
+ pr_warn("Transition failed with error %d\n", ret);
retval = -ENODEV;
goto migrate_end;
}
/* notify BIOS that we exist */
acpi_processor_notify_smm(THIS_MODULE);
- printk(KERN_INFO "acpi-cpufreq: CPU%u - ACPI performance management "
- "activated.\n", cpu);
+ pr_info("CPU%u - ACPI performance management activated\n", cpu);
for (i = 0; i < data->acpi_data.state_count; i++)
pr_debug(" %cP%d: %d MHz, %d mW, %d uS, %d uS, 0x%x 0x%x\n",
* of the License.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/kernel_stat.h>
#include <linux/module.h>
#define ATOM_TURBO_RATIOS 0x66c
#define ATOM_TURBO_VIDS 0x66d
+#ifdef CONFIG_ACPI
+#include <acpi/processor.h>
+#endif
+
#define FRAC_BITS 8
#define int_tofp(X) ((int64_t)(X) << FRAC_BITS)
#define fp_toint(X) ((X) >> FRAC_BITS)
+#define EXT_BITS 6
+#define EXT_FRAC_BITS (EXT_BITS + FRAC_BITS)
+
static inline int32_t mul_fp(int32_t x, int32_t y)
{
return ((int64_t)x * (int64_t)y) >> FRAC_BITS;
return ret;
}
+static inline u64 mul_ext_fp(u64 x, u64 y)
+{
+ return (x * y) >> EXT_FRAC_BITS;
+}
+
+static inline u64 div_ext_fp(u64 x, u64 y)
+{
+ return div64_u64(x << EXT_FRAC_BITS, y);
+}
+
/**
* struct sample - Store performance sample
- * @core_pct_busy: Ratio of APERF/MPERF in percent, which is actual
+ * @core_avg_perf: Ratio of APERF/MPERF which is the actual average
* performance during last sample period
* @busy_scaled: Scaled busy value which is used to calculate next
- * P state. This can be different than core_pct_busy
+ * P state. This can be different than core_avg_perf
* to account for cpu idle period
* @aperf: Difference of actual performance frequency clock count
* read from APERF MSR between last and current sample
* data for choosing next P State.
*/
struct sample {
- int32_t core_pct_busy;
+ int32_t core_avg_perf;
int32_t busy_scaled;
u64 aperf;
u64 mperf;
* struct cpudata - Per CPU instance data storage
* @cpu: CPU number for this instance data
* @update_util: CPUFreq utility callback information
+ * @update_util_set: CPUFreq utility callback is set
* @pstate: Stores P state limits for this CPU
* @vid: Stores VID limits for this CPU
* @pid: Stores PID parameters for this CPU
* @prev_cummulative_iowait: IO Wait time difference from last and
* current sample
* @sample: Storage for storing last Sample data
+ * @acpi_perf_data: Stores ACPI perf information read from _PSS
+ * @valid_pss_table: Set to true for valid ACPI _PSS entries found
*
* This structure stores per CPU instance data for all CPUs.
*/
int cpu;
struct update_util_data update_util;
+ bool update_util_set;
struct pstate_data pstate;
struct vid_data vid;
u64 prev_tsc;
u64 prev_cummulative_iowait;
struct sample sample;
+#ifdef CONFIG_ACPI
+ struct acpi_processor_performance acpi_perf_data;
+ bool valid_pss_table;
+#endif
};
static struct cpudata **all_cpu_data;
static struct pstate_funcs pstate_funcs;
static int hwp_active;
+#ifdef CONFIG_ACPI
+static bool acpi_ppc;
+#endif
/**
* struct perf_limits - Store user and policy limits
static struct perf_limits *limits = &powersave_limits;
#endif
+#ifdef CONFIG_ACPI
+
+static bool intel_pstate_get_ppc_enable_status(void)
+{
+ if (acpi_gbl_FADT.preferred_profile == PM_ENTERPRISE_SERVER ||
+ acpi_gbl_FADT.preferred_profile == PM_PERFORMANCE_SERVER)
+ return true;
+
+ return acpi_ppc;
+}
+
+/*
+ * The max target pstate ratio is a 8 bit value in both PLATFORM_INFO MSR and
+ * in TURBO_RATIO_LIMIT MSR, which pstate driver stores in max_pstate and
+ * max_turbo_pstate fields. The PERF_CTL MSR contains 16 bit value for P state
+ * ratio, out of it only high 8 bits are used. For example 0x1700 is setting
+ * target ratio 0x17. The _PSS control value stores in a format which can be
+ * directly written to PERF_CTL MSR. But in intel_pstate driver this shift
+ * occurs during write to PERF_CTL (E.g. for cores core_set_pstate()).
+ * This function converts the _PSS control value to intel pstate driver format
+ * for comparison and assignment.
+ */
+static int convert_to_native_pstate_format(struct cpudata *cpu, int index)
+{
+ return cpu->acpi_perf_data.states[index].control >> 8;
+}
+
+static void intel_pstate_init_acpi_perf_limits(struct cpufreq_policy *policy)
+{
+ struct cpudata *cpu;
+ int turbo_pss_ctl;
+ int ret;
+ int i;
+
+ if (hwp_active)
+ return;
+
+ if (!intel_pstate_get_ppc_enable_status())
+ return;
+
+ cpu = all_cpu_data[policy->cpu];
+
+ ret = acpi_processor_register_performance(&cpu->acpi_perf_data,
+ policy->cpu);
+ if (ret)
+ return;
+
+ /*
+ * Check if the control value in _PSS is for PERF_CTL MSR, which should
+ * guarantee that the states returned by it map to the states in our
+ * list directly.
+ */
+ if (cpu->acpi_perf_data.control_register.space_id !=
+ ACPI_ADR_SPACE_FIXED_HARDWARE)
+ goto err;
+
+ /*
+ * If there is only one entry _PSS, simply ignore _PSS and continue as
+ * usual without taking _PSS into account
+ */
+ if (cpu->acpi_perf_data.state_count < 2)
+ goto err;
+
+ pr_debug("CPU%u - ACPI _PSS perf data\n", policy->cpu);
+ for (i = 0; i < cpu->acpi_perf_data.state_count; i++) {
+ pr_debug(" %cP%d: %u MHz, %u mW, 0x%x\n",
+ (i == cpu->acpi_perf_data.state ? '*' : ' '), i,
+ (u32) cpu->acpi_perf_data.states[i].core_frequency,
+ (u32) cpu->acpi_perf_data.states[i].power,
+ (u32) cpu->acpi_perf_data.states[i].control);
+ }
+
+ /*
+ * The _PSS table doesn't contain whole turbo frequency range.
+ * This just contains +1 MHZ above the max non turbo frequency,
+ * with control value corresponding to max turbo ratio. But
+ * when cpufreq set policy is called, it will call with this
+ * max frequency, which will cause a reduced performance as
+ * this driver uses real max turbo frequency as the max
+ * frequency. So correct this frequency in _PSS table to
+ * correct max turbo frequency based on the turbo ratio.
+ * Also need to convert to MHz as _PSS freq is in MHz.
+ */
+ turbo_pss_ctl = convert_to_native_pstate_format(cpu, 0);
+ if (turbo_pss_ctl > cpu->pstate.max_pstate)
+ cpu->acpi_perf_data.states[0].core_frequency =
+ policy->cpuinfo.max_freq / 1000;
+ cpu->valid_pss_table = true;
+ pr_info("_PPC limits will be enforced\n");
+
+ return;
+
+ err:
+ cpu->valid_pss_table = false;
+ acpi_processor_unregister_performance(policy->cpu);
+}
+
+static void intel_pstate_exit_perf_limits(struct cpufreq_policy *policy)
+{
+ struct cpudata *cpu;
+
+ cpu = all_cpu_data[policy->cpu];
+ if (!cpu->valid_pss_table)
+ return;
+
+ acpi_processor_unregister_performance(policy->cpu);
+}
+
+#else
+static void intel_pstate_init_acpi_perf_limits(struct cpufreq_policy *policy)
+{
+}
+
+static void intel_pstate_exit_perf_limits(struct cpufreq_policy *policy)
+{
+}
+#endif
+
static inline void pid_reset(struct _pid *pid, int setpoint, int busy,
int deadband, int integral) {
pid->setpoint = int_tofp(setpoint);
static inline void pid_p_gain_set(struct _pid *pid, int percent)
{
- pid->p_gain = div_fp(int_tofp(percent), int_tofp(100));
+ pid->p_gain = div_fp(percent, 100);
}
static inline void pid_i_gain_set(struct _pid *pid, int percent)
{
- pid->i_gain = div_fp(int_tofp(percent), int_tofp(100));
+ pid->i_gain = div_fp(percent, 100);
}
static inline void pid_d_gain_set(struct _pid *pid, int percent)
{
- pid->d_gain = div_fp(int_tofp(percent), int_tofp(100));
+ pid->d_gain = div_fp(percent, 100);
}
static signed int pid_calc(struct _pid *pid, int32_t busy)
}
}
+static int intel_pstate_hwp_set_policy(struct cpufreq_policy *policy)
+{
+ if (hwp_active)
+ intel_pstate_hwp_set(policy->cpus);
+
+ return 0;
+}
+
static void intel_pstate_hwp_set_online_cpus(void)
{
get_online_cpus();
total = cpu->pstate.turbo_pstate - cpu->pstate.min_pstate + 1;
no_turbo = cpu->pstate.max_pstate - cpu->pstate.min_pstate + 1;
- turbo_fp = div_fp(int_tofp(no_turbo), int_tofp(total));
+ turbo_fp = div_fp(no_turbo, total);
turbo_pct = 100 - fp_toint(mul_fp(turbo_fp, int_tofp(100)));
return sprintf(buf, "%u\n", turbo_pct);
}
update_turbo_state();
if (limits->turbo_disabled) {
- pr_warn("intel_pstate: Turbo disabled by BIOS or unavailable on processor\n");
+ pr_warn("Turbo disabled by BIOS or unavailable on processor\n");
return -EPERM;
}
limits->max_perf_pct);
limits->max_perf_pct = max(limits->min_perf_pct,
limits->max_perf_pct);
- limits->max_perf = div_fp(int_tofp(limits->max_perf_pct),
- int_tofp(100));
+ limits->max_perf = div_fp(limits->max_perf_pct, 100);
if (hwp_active)
intel_pstate_hwp_set_online_cpus();
limits->min_perf_pct);
limits->min_perf_pct = min(limits->max_perf_pct,
limits->min_perf_pct);
- limits->min_perf = div_fp(int_tofp(limits->min_perf_pct),
- int_tofp(100));
+ limits->min_perf = div_fp(limits->min_perf_pct, 100);
if (hwp_active)
intel_pstate_hwp_set_online_cpus();
if (err)
goto skip_tar;
+ /* For level 1 and 2, bits[23:16] contain the ratio */
+ if (tdp_ctrl)
+ tdp_ratio >>= 16;
+
+ tdp_ratio &= 0xff; /* ratios are only 8 bits long */
if (tdp_ratio - 1 == tar) {
max_pstate = tar;
pr_debug("max_pstate=TAC %x\n", max_pstate);
intel_pstate_set_min_pstate(cpu);
}
-static inline void intel_pstate_calc_busy(struct cpudata *cpu)
+static inline void intel_pstate_calc_avg_perf(struct cpudata *cpu)
{
struct sample *sample = &cpu->sample;
- int64_t core_pct;
-
- core_pct = int_tofp(sample->aperf) * int_tofp(100);
- core_pct = div64_u64(core_pct, int_tofp(sample->mperf));
- sample->core_pct_busy = (int32_t)core_pct;
+ sample->core_avg_perf = div_ext_fp(sample->aperf, sample->mperf);
}
static inline bool intel_pstate_sample(struct cpudata *cpu, u64 time)
static inline int32_t get_avg_frequency(struct cpudata *cpu)
{
- return div64_u64(cpu->pstate.max_pstate_physical * cpu->sample.aperf *
- cpu->pstate.scaling, cpu->sample.mperf);
+ return mul_ext_fp(cpu->sample.core_avg_perf,
+ cpu->pstate.max_pstate_physical * cpu->pstate.scaling);
+}
+
+static inline int32_t get_avg_pstate(struct cpudata *cpu)
+{
+ return mul_ext_fp(cpu->pstate.max_pstate_physical,
+ cpu->sample.core_avg_perf);
}
static inline int32_t get_target_pstate_use_cpu_load(struct cpudata *cpu)
cpu_load = div64_u64(int_tofp(100) * mperf, sample->tsc);
cpu->sample.busy_scaled = cpu_load;
- return cpu->pstate.current_pstate - pid_calc(&cpu->pid, cpu_load);
+ return get_avg_pstate(cpu) - pid_calc(&cpu->pid, cpu_load);
}
static inline int32_t get_target_pstate_use_performance(struct cpudata *cpu)
{
- int32_t core_busy, max_pstate, current_pstate, sample_ratio;
+ int32_t perf_scaled, max_pstate, current_pstate, sample_ratio;
u64 duration_ns;
- intel_pstate_calc_busy(cpu);
-
/*
- * core_busy is the ratio of actual performance to max
- * max_pstate is the max non turbo pstate available
- * current_pstate was the pstate that was requested during
- * the last sample period.
- *
- * We normalize core_busy, which was our actual percent
- * performance to what we requested during the last sample
- * period. The result will be a percentage of busy at a
- * specified pstate.
+ * perf_scaled is the average performance during the last sampling
+ * period scaled by the ratio of the maximum P-state to the P-state
+ * requested last time (in percent). That measures the system's
+ * response to the previous P-state selection.
*/
- core_busy = cpu->sample.core_pct_busy;
- max_pstate = int_tofp(cpu->pstate.max_pstate_physical);
- current_pstate = int_tofp(cpu->pstate.current_pstate);
- core_busy = mul_fp(core_busy, div_fp(max_pstate, current_pstate));
+ max_pstate = cpu->pstate.max_pstate_physical;
+ current_pstate = cpu->pstate.current_pstate;
+ perf_scaled = mul_ext_fp(cpu->sample.core_avg_perf,
+ div_fp(100 * max_pstate, current_pstate));
/*
* Since our utilization update callback will not run unless we are
* in C0, check if the actual elapsed time is significantly greater (3x)
* than our sample interval. If it is, then we were idle for a long
- * enough period of time to adjust our busyness.
+ * enough period of time to adjust our performance metric.
*/
duration_ns = cpu->sample.time - cpu->last_sample_time;
if ((s64)duration_ns > pid_params.sample_rate_ns * 3) {
- sample_ratio = div_fp(int_tofp(pid_params.sample_rate_ns),
- int_tofp(duration_ns));
- core_busy = mul_fp(core_busy, sample_ratio);
+ sample_ratio = div_fp(pid_params.sample_rate_ns, duration_ns);
+ perf_scaled = mul_fp(perf_scaled, sample_ratio);
} else {
sample_ratio = div_fp(100 * cpu->sample.mperf, cpu->sample.tsc);
if (sample_ratio < int_tofp(1))
- core_busy = 0;
+ perf_scaled = 0;
}
- cpu->sample.busy_scaled = core_busy;
- return cpu->pstate.current_pstate - pid_calc(&cpu->pid, core_busy);
+ cpu->sample.busy_scaled = perf_scaled;
+ return cpu->pstate.current_pstate - pid_calc(&cpu->pid, perf_scaled);
}
static inline void intel_pstate_update_pstate(struct cpudata *cpu, int pstate)
intel_pstate_update_pstate(cpu, target_pstate);
sample = &cpu->sample;
- trace_pstate_sample(fp_toint(sample->core_pct_busy),
+ trace_pstate_sample(mul_ext_fp(100, sample->core_avg_perf),
fp_toint(sample->busy_scaled),
from,
cpu->pstate.current_pstate,
if ((s64)delta_ns >= pid_params.sample_rate_ns) {
bool sample_taken = intel_pstate_sample(cpu, time);
- if (sample_taken && !hwp_active)
- intel_pstate_adjust_busy_pstate(cpu);
+ if (sample_taken) {
+ intel_pstate_calc_avg_perf(cpu);
+ if (!hwp_active)
+ intel_pstate_adjust_busy_pstate(cpu);
+ }
}
}
intel_pstate_busy_pid_reset(cpu);
- cpu->update_util.func = intel_pstate_update_util;
-
- pr_debug("intel_pstate: controlling: cpu %d\n", cpunum);
+ pr_debug("controlling: cpu %d\n", cpunum);
return 0;
}
static unsigned int intel_pstate_get(unsigned int cpu_num)
{
- struct sample *sample;
- struct cpudata *cpu;
+ struct cpudata *cpu = all_cpu_data[cpu_num];
- cpu = all_cpu_data[cpu_num];
- if (!cpu)
- return 0;
- sample = &cpu->sample;
- return get_avg_frequency(cpu);
+ return cpu ? get_avg_frequency(cpu) : 0;
}
static void intel_pstate_set_update_util_hook(unsigned int cpu_num)
/* Prevent intel_pstate_update_util() from using stale data. */
cpu->sample.time = 0;
- cpufreq_set_update_util_data(cpu_num, &cpu->update_util);
+ cpufreq_add_update_util_hook(cpu_num, &cpu->update_util,
+ intel_pstate_update_util);
+ cpu->update_util_set = true;
}
static void intel_pstate_clear_update_util_hook(unsigned int cpu)
{
- cpufreq_set_update_util_data(cpu, NULL);
+ struct cpudata *cpu_data = all_cpu_data[cpu];
+
+ if (!cpu_data->update_util_set)
+ return;
+
+ cpufreq_remove_update_util_hook(cpu);
+ cpu_data->update_util_set = false;
synchronize_sched();
}
static int intel_pstate_set_policy(struct cpufreq_policy *policy)
{
+ struct cpudata *cpu;
+
if (!policy->cpuinfo.max_freq)
return -ENODEV;
intel_pstate_clear_update_util_hook(policy->cpu);
+ cpu = all_cpu_data[0];
+ if (cpu->pstate.max_pstate_physical > cpu->pstate.max_pstate) {
+ if (policy->max < policy->cpuinfo.max_freq &&
+ policy->max > cpu->pstate.max_pstate * cpu->pstate.scaling) {
+ pr_debug("policy->max > max non turbo frequency\n");
+ policy->max = policy->cpuinfo.max_freq;
+ }
+ }
+
if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
limits = &performance_limits;
if (policy->max >= policy->cpuinfo.max_freq) {
- pr_debug("intel_pstate: set performance\n");
+ pr_debug("set performance\n");
intel_pstate_set_performance_limits(limits);
goto out;
}
} else {
- pr_debug("intel_pstate: set powersave\n");
+ pr_debug("set powersave\n");
limits = &powersave_limits;
}
/* Make sure min_perf_pct <= max_perf_pct */
limits->min_perf_pct = min(limits->max_perf_pct, limits->min_perf_pct);
- limits->min_perf = div_fp(int_tofp(limits->min_perf_pct),
- int_tofp(100));
- limits->max_perf = div_fp(int_tofp(limits->max_perf_pct),
- int_tofp(100));
+ limits->min_perf = div_fp(limits->min_perf_pct, 100);
+ limits->max_perf = div_fp(limits->max_perf_pct, 100);
out:
intel_pstate_set_update_util_hook(policy->cpu);
- if (hwp_active)
- intel_pstate_hwp_set(policy->cpus);
+ intel_pstate_hwp_set_policy(policy);
return 0;
}
int cpu_num = policy->cpu;
struct cpudata *cpu = all_cpu_data[cpu_num];
- pr_debug("intel_pstate: CPU %d exiting\n", cpu_num);
+ pr_debug("CPU %d exiting\n", cpu_num);
intel_pstate_clear_update_util_hook(cpu_num);
policy->cpuinfo.min_freq = cpu->pstate.min_pstate * cpu->pstate.scaling;
policy->cpuinfo.max_freq =
cpu->pstate.turbo_pstate * cpu->pstate.scaling;
+ intel_pstate_init_acpi_perf_limits(policy);
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
cpumask_set_cpu(policy->cpu, policy->cpus);
return 0;
}
+static int intel_pstate_cpu_exit(struct cpufreq_policy *policy)
+{
+ intel_pstate_exit_perf_limits(policy);
+
+ return 0;
+}
+
static struct cpufreq_driver intel_pstate_driver = {
.flags = CPUFREQ_CONST_LOOPS,
.verify = intel_pstate_verify_policy,
.setpolicy = intel_pstate_set_policy,
+ .resume = intel_pstate_hwp_set_policy,
.get = intel_pstate_get,
.init = intel_pstate_cpu_init,
+ .exit = intel_pstate_cpu_exit,
.stop_cpu = intel_pstate_stop_cpu,
.name = "intel_pstate",
};
}
-#if IS_ENABLED(CONFIG_ACPI)
-#include <acpi/processor.h>
+#ifdef CONFIG_ACPI
static bool intel_pstate_no_acpi_pss(void)
{
if (intel_pstate_platform_pwr_mgmt_exists())
return -ENODEV;
- pr_info("Intel P-state driver initializing.\n");
+ pr_info("Intel P-state driver initializing\n");
all_cpu_data = vzalloc(sizeof(void *) * num_possible_cpus());
if (!all_cpu_data)
intel_pstate_sysfs_expose_params();
if (hwp_active)
- pr_info("intel_pstate: HWP enabled\n");
+ pr_info("HWP enabled\n");
return rc;
out:
if (!strcmp(str, "disable"))
no_load = 1;
if (!strcmp(str, "no_hwp")) {
- pr_info("intel_pstate: HWP disabled\n");
+ pr_info("HWP disabled\n");
no_hwp = 1;
}
if (!strcmp(str, "force"))
force_load = 1;
if (!strcmp(str, "hwp_only"))
hwp_only = 1;
+
+#ifdef CONFIG_ACPI
+ if (!strcmp(str, "support_acpi_ppc"))
+ acpi_ppc = true;
+#endif
+
return 0;
}
early_param("intel_pstate", intel_pstate_setup);
* BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include "longhaul.h"
-#define PFX "longhaul: "
-
#define TYPE_LONGHAUL_V1 1
#define TYPE_LONGHAUL_V2 2
#define TYPE_POWERSAVER 3
freqs.new = calc_speed(longhaul_get_cpu_mult());
/* Check if requested frequency is set. */
if (unlikely(freqs.new != speed)) {
- printk(KERN_INFO PFX "Failed to set requested frequency!\n");
+ pr_info("Failed to set requested frequency!\n");
/* Revision ID = 1 but processor is expecting revision key
* equal to 0. Jumpers at the bottom of processor will change
* multiplier and FSB, but will not change bits in Longhaul
* MSR nor enable voltage scaling. */
if (!revid_errata) {
- printk(KERN_INFO PFX "Enabling \"Ignore Revision ID\" "
- "option.\n");
+ pr_info("Enabling \"Ignore Revision ID\" option\n");
revid_errata = 1;
msleep(200);
goto retry_loop;
* but it doesn't change frequency. I tried poking various
* bits in northbridge registers, but without success. */
if (longhaul_flags & USE_ACPI_C3) {
- printk(KERN_INFO PFX "Disabling ACPI C3 support.\n");
+ pr_info("Disabling ACPI C3 support\n");
longhaul_flags &= ~USE_ACPI_C3;
if (revid_errata) {
- printk(KERN_INFO PFX "Disabling \"Ignore "
- "Revision ID\" option.\n");
+ pr_info("Disabling \"Ignore Revision ID\" option\n");
revid_errata = 0;
}
msleep(200);
* RevID = 1. RevID errata will make things right. Just
* to be 100% sure. */
if (longhaul_version == TYPE_LONGHAUL_V2) {
- printk(KERN_INFO PFX "Switching to Longhaul ver. 1\n");
+ pr_info("Switching to Longhaul ver. 1\n");
longhaul_version = TYPE_LONGHAUL_V1;
msleep(200);
goto retry_loop;
}
if (!bm_timeout) {
- printk(KERN_INFO PFX "Warning: Timeout while waiting for "
- "idle PCI bus.\n");
+ pr_info("Warning: Timeout while waiting for idle PCI bus\n");
return -EBUSY;
}
/* Get current frequency */
mult = longhaul_get_cpu_mult();
if (mult == -1) {
- printk(KERN_INFO PFX "Invalid (reserved) multiplier!\n");
+ pr_info("Invalid (reserved) multiplier!\n");
return -EINVAL;
}
fsb = guess_fsb(mult);
if (fsb == 0) {
- printk(KERN_INFO PFX "Invalid (reserved) FSB!\n");
+ pr_info("Invalid (reserved) FSB!\n");
return -EINVAL;
}
/* Get max multiplier - as we always did.
print_speed(highest_speed/1000));
if (lowest_speed == highest_speed) {
- printk(KERN_INFO PFX "highestspeed == lowest, aborting.\n");
+ pr_info("highestspeed == lowest, aborting\n");
return -EINVAL;
}
if (lowest_speed > highest_speed) {
- printk(KERN_INFO PFX "nonsense! lowest (%d > %d) !\n",
+ pr_info("nonsense! lowest (%d > %d) !\n",
lowest_speed, highest_speed);
return -EINVAL;
}
rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
if (!(longhaul.bits.RevisionID & 1)) {
- printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n");
+ pr_info("Voltage scaling not supported by CPU\n");
return;
}
if (!longhaul.bits.VRMRev) {
- printk(KERN_INFO PFX "VRM 8.5\n");
+ pr_info("VRM 8.5\n");
vrm_mV_table = &vrm85_mV[0];
mV_vrm_table = &mV_vrm85[0];
} else {
- printk(KERN_INFO PFX "Mobile VRM\n");
+ pr_info("Mobile VRM\n");
if (cpu_model < CPU_NEHEMIAH)
return;
vrm_mV_table = &mobilevrm_mV[0];
maxvid = vrm_mV_table[longhaul.bits.MaximumVID];
if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) {
- printk(KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. "
- "Voltage scaling disabled.\n",
- minvid.mV/1000, minvid.mV%1000,
- maxvid.mV/1000, maxvid.mV%1000);
+ pr_info("Bogus values Min:%d.%03d Max:%d.%03d - Voltage scaling disabled\n",
+ minvid.mV/1000, minvid.mV%1000,
+ maxvid.mV/1000, maxvid.mV%1000);
return;
}
if (minvid.mV == maxvid.mV) {
- printk(KERN_INFO PFX "Claims to support voltage scaling but "
- "min & max are both %d.%03d. "
- "Voltage scaling disabled\n",
- maxvid.mV/1000, maxvid.mV%1000);
+ pr_info("Claims to support voltage scaling but min & max are both %d.%03d - Voltage scaling disabled\n",
+ maxvid.mV/1000, maxvid.mV%1000);
return;
}
/* How many voltage steps*/
numvscales = maxvid.pos - minvid.pos + 1;
- printk(KERN_INFO PFX
- "Max VID=%d.%03d "
- "Min VID=%d.%03d, "
- "%d possible voltage scales\n",
+ pr_info("Max VID=%d.%03d Min VID=%d.%03d, %d possible voltage scales\n",
maxvid.mV/1000, maxvid.mV%1000,
minvid.mV/1000, minvid.mV%1000,
numvscales);
pos = minvid.pos;
freq_pos->driver_data |= mV_vrm_table[pos] << 8;
vid = vrm_mV_table[mV_vrm_table[pos]];
- printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n",
+ pr_info("f: %d kHz, index: %d, vid: %d mV\n",
speed, (int)(freq_pos - longhaul_table), vid.mV);
}
can_scale_voltage = 1;
- printk(KERN_INFO PFX "Voltage scaling enabled.\n");
+ pr_info("Voltage scaling enabled\n");
}
pci_write_config_byte(dev, reg, pci_cmd);
pci_read_config_byte(dev, reg, &pci_cmd);
if (!(pci_cmd & 1<<7)) {
- printk(KERN_ERR PFX
- "Can't enable access to port 0x22.\n");
+ pr_err("Can't enable access to port 0x22\n");
status = 0;
}
}
if (pci_cmd & 1 << 7) {
pci_read_config_dword(dev, 0x88, &acpi_regs_addr);
acpi_regs_addr &= 0xff00;
- printk(KERN_INFO PFX "ACPI I/O at 0x%x\n",
- acpi_regs_addr);
+ pr_info("ACPI I/O at 0x%x\n", acpi_regs_addr);
}
pci_dev_put(dev);
longhaul_version = TYPE_LONGHAUL_V1;
}
- printk(KERN_INFO PFX "VIA %s CPU detected. ", cpuname);
+ pr_info("VIA %s CPU detected. ", cpuname);
switch (longhaul_version) {
case TYPE_LONGHAUL_V1:
case TYPE_LONGHAUL_V2:
- printk(KERN_CONT "Longhaul v%d supported.\n", longhaul_version);
+ pr_cont("Longhaul v%d supported\n", longhaul_version);
break;
case TYPE_POWERSAVER:
- printk(KERN_CONT "Powersaver supported.\n");
+ pr_cont("Powersaver supported\n");
break;
};
if (!(longhaul_flags & USE_ACPI_C3
|| longhaul_flags & USE_NORTHBRIDGE)
&& ((pr == NULL) || !(pr->flags.bm_control))) {
- printk(KERN_ERR PFX
- "No ACPI support. Unsupported northbridge.\n");
+ pr_err("No ACPI support: Unsupported northbridge\n");
return -ENODEV;
}
if (longhaul_flags & USE_NORTHBRIDGE)
- printk(KERN_INFO PFX "Using northbridge support.\n");
+ pr_info("Using northbridge support\n");
if (longhaul_flags & USE_ACPI_C3)
- printk(KERN_INFO PFX "Using ACPI support.\n");
+ pr_info("Using ACPI support\n");
ret = longhaul_get_ranges();
if (ret != 0)
return -ENODEV;
if (!enable) {
- printk(KERN_ERR PFX "Option \"enable\" not set. Aborting.\n");
+ pr_err("Option \"enable\" not set - Aborting\n");
return -ENODEV;
}
#ifdef CONFIG_SMP
if (num_online_cpus() > 1) {
- printk(KERN_ERR PFX "More than 1 CPU detected, "
- "longhaul disabled.\n");
+ pr_err("More than 1 CPU detected, longhaul disabled\n");
return -ENODEV;
}
#endif
#ifdef CONFIG_X86_IO_APIC
if (cpu_has_apic) {
- printk(KERN_ERR PFX "APIC detected. Longhaul is currently "
- "broken in this configuration.\n");
+ pr_err("APIC detected. Longhaul is currently broken in this configuration.\n");
return -ENODEV;
}
#endif
case 6 ... 9:
return cpufreq_register_driver(&longhaul_driver);
case 10:
- printk(KERN_ERR PFX "Use acpi-cpufreq driver for VIA C7\n");
+ pr_err("Use acpi-cpufreq driver for VIA C7\n");
default:
;
}
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/cpufreq.h>
#include <linux/module.h>
#include <linux/err.h>
cpuclk = clk_get(NULL, "cpu_clk");
if (IS_ERR(cpuclk)) {
- printk(KERN_ERR "cpufreq: couldn't get CPU clk\n");
+ pr_err("couldn't get CPU clk\n");
return PTR_ERR(cpuclk);
}
if (ret)
return ret;
- pr_info("cpufreq: Loongson-2F CPU frequency driver.\n");
+ pr_info("Loongson-2F CPU frequency driver\n");
cpufreq_register_notifier(&loongson2_cpufreq_notifier_block,
CPUFREQ_TRANSITION_NOTIFIER);
#undef DEBUG
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/types.h>
#include <linux/errno.h>
/* Get first CPU node */
cpunode = of_cpu_device_node_get(0);
if (cpunode == NULL) {
- printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n");
+ pr_err("Can't find any CPU 0 node\n");
goto bail_noprops;
}
/* we actually don't care on which CPU to access PVR */
pvr_hi = PVR_VER(mfspr(SPRN_PVR));
if (pvr_hi != 0x3c && pvr_hi != 0x44) {
- printk(KERN_ERR "cpufreq: Unsupported CPU version (%x)\n",
- pvr_hi);
+ pr_err("Unsupported CPU version (%x)\n", pvr_hi);
goto bail_noprops;
}
maple_pmode_cur = -1;
maple_scom_switch_freq(maple_scom_query_freq());
- printk(KERN_INFO "Registering Maple CPU frequency driver\n");
- printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
+ pr_info("Registering Maple CPU frequency driver\n");
+ pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
maple_cpu_freqs[1].frequency/1000,
maple_cpu_freqs[0].frequency/1000,
maple_cpu_freqs[maple_pmode_cur].frequency/1000);
static struct mtk_cpu_dvfs_info *mtk_cpu_dvfs_info_lookup(int cpu)
{
struct mtk_cpu_dvfs_info *info;
- struct list_head *list;
-
- list_for_each(list, &dvfs_info_list) {
- info = list_entry(list, struct mtk_cpu_dvfs_info, list_head);
+ list_for_each_entry(info, &dvfs_info_list, list_head) {
if (cpumask_test_cpu(cpu, &info->cpus))
return info;
}
static int mt8173_cpufreq_probe(struct platform_device *pdev)
{
- struct mtk_cpu_dvfs_info *info;
- struct list_head *list, *tmp;
+ struct mtk_cpu_dvfs_info *info, *tmp;
int cpu, ret;
for_each_possible_cpu(cpu) {
return 0;
release_dvfs_info_list:
- list_for_each_safe(list, tmp, &dvfs_info_list) {
- info = list_entry(list, struct mtk_cpu_dvfs_info, list_head);
-
+ list_for_each_entry_safe(info, tmp, &dvfs_info_list, list_head) {
mtk_cpu_dvfs_info_release(info);
- list_del(list);
+ list_del(&info->list_head);
}
return ret;
--- /dev/null
+/*
+ * CPUFreq support for Armada 370/XP platforms.
+ *
+ * Copyright (C) 2012-2016 Marvell
+ *
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory Clement <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "mvebu-pmsu: " fmt
+
+#include <linux/clk.h>
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pm_opp.h>
+#include <linux/resource.h>
+
+static int __init armada_xp_pmsu_cpufreq_init(void)
+{
+ struct device_node *np;
+ struct resource res;
+ int ret, cpu;
+
+ if (!of_machine_is_compatible("marvell,armadaxp"))
+ return 0;
+
+ /*
+ * In order to have proper cpufreq handling, we need to ensure
+ * that the Device Tree description of the CPU clock includes
+ * the definition of the PMU DFS registers. If not, we do not
+ * register the clock notifier and the cpufreq driver. This
+ * piece of code is only for compatibility with old Device
+ * Trees.
+ */
+ np = of_find_compatible_node(NULL, NULL, "marvell,armada-xp-cpu-clock");
+ if (!np)
+ return 0;
+
+ ret = of_address_to_resource(np, 1, &res);
+ if (ret) {
+ pr_warn(FW_WARN "not enabling cpufreq, deprecated armada-xp-cpu-clock binding\n");
+ of_node_put(np);
+ return 0;
+ }
+
+ of_node_put(np);
+
+ /*
+ * For each CPU, this loop registers the operating points
+ * supported (which are the nominal CPU frequency and half of
+ * it), and registers the clock notifier that will take care
+ * of doing the PMSU part of a frequency transition.
+ */
+ for_each_possible_cpu(cpu) {
+ struct device *cpu_dev;
+ struct clk *clk;
+ int ret;
+
+ cpu_dev = get_cpu_device(cpu);
+ if (!cpu_dev) {
+ pr_err("Cannot get CPU %d\n", cpu);
+ continue;
+ }
+
+ clk = clk_get(cpu_dev, 0);
+ if (IS_ERR(clk)) {
+ pr_err("Cannot get clock for CPU %d\n", cpu);
+ return PTR_ERR(clk);
+ }
+
+ /*
+ * In case of a failure of dev_pm_opp_add(), we don't
+ * bother with cleaning up the registered OPP (there's
+ * no function to do so), and simply cancel the
+ * registration of the cpufreq device.
+ */
+ ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk), 0);
+ if (ret) {
+ clk_put(clk);
+ return ret;
+ }
+
+ ret = dev_pm_opp_add(cpu_dev, clk_get_rate(clk) / 2, 0);
+ if (ret) {
+ clk_put(clk);
+ return ret;
+ }
+
+ ret = dev_pm_opp_set_sharing_cpus(cpu_dev,
+ cpumask_of(cpu_dev->id));
+ if (ret)
+ dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
+ __func__, ret);
+ }
+
+ platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+ return 0;
+}
+device_initcall(armada_xp_pmsu_cpufreq_init);
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
{
mpu_dev = get_cpu_device(0);
if (!mpu_dev) {
- pr_warning("%s: unable to get the mpu device\n", __func__);
+ pr_warn("%s: unable to get the MPU device\n", __func__);
return -EINVAL;
}
mpu_reg = regulator_get(mpu_dev, "vcc");
if (IS_ERR(mpu_reg)) {
- pr_warning("%s: unable to get MPU regulator\n", __func__);
+ pr_warn("%s: unable to get MPU regulator\n", __func__);
mpu_reg = NULL;
} else {
/*
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include "speedstep-lib.h"
-#define PFX "p4-clockmod: "
-
/*
* Duty Cycle (3bits), note DC_DISABLE is not specified in
* intel docs i just use it to mean disable
{
if (c->x86 == 0x06) {
if (cpu_has(c, X86_FEATURE_EST))
- printk_once(KERN_WARNING PFX "Warning: EST-capable "
- "CPU detected. The acpi-cpufreq module offers "
- "voltage scaling in addition to frequency "
- "scaling. You should use that instead of "
- "p4-clockmod, if possible.\n");
+ pr_warn_once("Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.\n");
switch (c->x86_model) {
case 0x0E: /* Core */
case 0x0F: /* Core Duo */
p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) {
- printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. "
- "The speedstep-ich or acpi cpufreq modules offer "
- "voltage scaling in addition of frequency scaling. "
- "You should use either one instead of p4-clockmod, "
- "if possible.\n");
+ pr_warn("Warning: Pentium 4-M detected. The speedstep-ich or acpi cpufreq modules offer voltage scaling in addition of frequency scaling. You should use either one instead of p4-clockmod, if possible.\n");
return speedstep_get_frequency(SPEEDSTEP_CPU_P4M);
}
ret = cpufreq_register_driver(&p4clockmod_driver);
if (!ret)
- printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock "
- "Modulation available\n");
+ pr_info("P4/Xeon(TM) CPU On-Demand Clock Modulation available\n");
return ret;
}
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/types.h>
#include <linux/errno.h>
freqs = of_get_property(cpunode, "bus-frequencies", &lenp);
lenp /= sizeof(u32);
if (freqs == NULL || lenp != 2) {
- printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n");
+ pr_err("bus-frequencies incorrect or missing\n");
return 1;
}
ratio = of_get_property(cpunode, "processor-to-bus-ratio*2",
NULL);
if (ratio == NULL) {
- printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n");
+ pr_err("processor-to-bus-ratio*2 missing\n");
return 1;
}
if (volt_gpio_np)
voltage_gpio = read_gpio(volt_gpio_np);
if (!voltage_gpio){
- printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n");
+ pr_err("missing cpu-vcore-select gpio\n");
return 1;
}
pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq;
ppc_proc_freq = cur_freq * 1000ul;
- printk(KERN_INFO "Registering PowerMac CPU frequency driver\n");
- printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n",
- low_freq/1000, hi_freq/1000, cur_freq/1000);
+ pr_info("Registering PowerMac CPU frequency driver\n");
+ pr_info("Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n",
+ low_freq/1000, hi_freq/1000, cur_freq/1000);
return cpufreq_register_driver(&pmac_cpufreq_driver);
}
#undef DEBUG
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/types.h>
#include <linux/errno.h>
usleep_range(1000, 1000);
}
if (done == 0)
- printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n");
+ pr_warn("Timeout in clock slewing !\n");
}
rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL);
if (rc)
- printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc);
+ pr_warn("pfunc switch error %d\n", rc);
/* It's an irq GPIO so we should be able to just block here,
* I'll do that later after I've properly tested the IRQ code for
usleep_range(500, 500);
}
if (done == 0)
- printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n");
+ pr_warn("Timeout in clock slewing !\n");
/* If frequency is going down, last ramp the voltage */
if (speed_mode > g5_pmode_cur)
}
pvr_hi = (*valp) >> 16;
if (pvr_hi != 0x3c && pvr_hi != 0x44) {
- printk(KERN_ERR "cpufreq: Unsupported CPU version\n");
+ pr_err("Unsupported CPU version\n");
goto bail_noprops;
}
root = of_find_node_by_path("/");
if (root == NULL) {
- printk(KERN_ERR "cpufreq: Can't find root of "
- "device tree\n");
+ pr_err("Can't find root of device tree\n");
goto bail_noprops;
}
pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0");
pmf_find_function(root, "slewing-done");
if (pfunc_set_vdnap0 == NULL ||
pfunc_vdnap0_complete == NULL) {
- printk(KERN_ERR "cpufreq: Can't find required "
- "platform function\n");
+ pr_err("Can't find required platform function\n");
goto bail_noprops;
}
g5_pmode_cur = -1;
g5_switch_freq(g5_query_freq());
- printk(KERN_INFO "Registering G5 CPU frequency driver\n");
- printk(KERN_INFO "Frequency method: %s, Voltage method: %s\n",
- freq_method, volt_method);
- printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
+ pr_info("Registering G5 CPU frequency driver\n");
+ pr_info("Frequency method: %s, Voltage method: %s\n",
+ freq_method, volt_method);
+ pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
g5_cpu_freqs[1].frequency/1000,
g5_cpu_freqs[0].frequency/1000,
g5_cpu_freqs[g5_pmode_cur].frequency/1000);
if (cpuid != NULL)
eeprom = of_get_property(cpuid, "cpuid", NULL);
if (eeprom == NULL) {
- printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n");
+ pr_err("Can't find cpuid EEPROM !\n");
rc = -ENODEV;
goto bail;
}
break;
}
if (hwclock == NULL) {
- printk(KERN_ERR "cpufreq: Can't find i2c clock chip !\n");
+ pr_err("Can't find i2c clock chip !\n");
rc = -ENODEV;
goto bail;
}
/* Check we have minimum requirements */
if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL ||
pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) {
- printk(KERN_ERR "cpufreq: Can't find platform functions !\n");
+ pr_err("Can't find platform functions !\n");
rc = -ENODEV;
goto bail;
}
/* Get max frequency from device-tree */
valp = of_get_property(cpunode, "clock-frequency", NULL);
if (!valp) {
- printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n");
+ pr_err("Can't find CPU frequency !\n");
rc = -ENODEV;
goto bail;
}
/* Check for machines with no useful settings */
if (il == ih) {
- printk(KERN_WARNING "cpufreq: No low frequency mode available"
- " on this model !\n");
+ pr_warn("No low frequency mode available on this model !\n");
rc = -ENODEV;
goto bail;
}
/* Sanity check */
if (min_freq >= max_freq || min_freq < 1000) {
- printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n");
+ pr_err("Can't calculate low frequency !\n");
rc = -ENXIO;
goto bail;
}
g5_pmode_cur = -1;
g5_switch_freq(g5_query_freq());
- printk(KERN_INFO "Registering G5 CPU frequency driver\n");
- printk(KERN_INFO "Frequency method: i2c/pfunc, "
- "Voltage method: %s\n", has_volt ? "i2c/pfunc" : "none");
- printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
+ pr_info("Registering G5 CPU frequency driver\n");
+ pr_info("Frequency method: i2c/pfunc, Voltage method: %s\n",
+ has_volt ? "i2c/pfunc" : "none");
+ pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
g5_cpu_freqs[1].frequency/1000,
g5_cpu_freqs[0].frequency/1000,
g5_cpu_freqs[g5_pmode_cur].frequency/1000);
/* Get first CPU node */
cpunode = of_cpu_device_node_get(0);
if (cpunode == NULL) {
- pr_err("cpufreq: Can't find any CPU node\n");
+ pr_err("Can't find any CPU node\n");
return -ENODEV;
}
* BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#define POWERNOW_IOPORT 0xfff0 /* it doesn't matter where, as long
as it is unused */
-#define PFX "powernow-k6: "
static unsigned int busfreq; /* FSB, in 10 kHz */
static unsigned int max_multiplier;
{
if (clock_ratio[best_i].driver_data > max_multiplier) {
- printk(KERN_ERR PFX "invalid target frequency\n");
+ pr_err("invalid target frequency\n");
return -EINVAL;
}
max_multiplier = param_max_multiplier;
goto have_max_multiplier;
}
- printk(KERN_ERR "powernow-k6: invalid max_multiplier parameter, valid parameters 20, 30, 35, 40, 45, 50, 55, 60\n");
+ pr_err("invalid max_multiplier parameter, valid parameters 20, 30, 35, 40, 45, 50, 55, 60\n");
return -EINVAL;
}
if (!max_multiplier) {
- printk(KERN_WARNING "powernow-k6: unknown frequency %u, cannot determine current multiplier\n", khz);
- printk(KERN_WARNING "powernow-k6: use module parameters max_multiplier and bus_frequency\n");
+ pr_warn("unknown frequency %u, cannot determine current multiplier\n",
+ khz);
+ pr_warn("use module parameters max_multiplier and bus_frequency\n");
return -EOPNOTSUPP;
}
busfreq = param_busfreq / 10;
goto have_busfreq;
}
- printk(KERN_ERR "powernow-k6: invalid bus_frequency parameter, allowed range 50000 - 150000 kHz\n");
+ pr_err("invalid bus_frequency parameter, allowed range 50000 - 150000 kHz\n");
return -EINVAL;
}
return -ENODEV;
if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) {
- printk(KERN_INFO PFX "PowerNow IOPORT region already used.\n");
+ pr_info("PowerNow IOPORT region already used\n");
return -EIO;
}
* - We disable half multipliers if ACPI is used on A0 stepping CPUs.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include "powernow-k7.h"
-#define PFX "powernow: "
-
-
struct psb_s {
u8 signature[10];
u8 tableversion;
maxei = cpuid_eax(0x80000000);
if (maxei < 0x80000007) { /* Any powernow info ? */
#ifdef MODULE
- printk(KERN_INFO PFX "No powernow capabilities detected\n");
+ pr_info("No powernow capabilities detected\n");
#endif
return 0;
}
if ((c->x86_model == 6) && (c->x86_mask == 0)) {
- printk(KERN_INFO PFX "K7 660[A0] core detected, "
- "enabling errata workarounds\n");
+ pr_info("K7 660[A0] core detected, enabling errata workarounds\n");
have_a0 = 1;
}
if (!(edx & (1 << 1 | 1 << 2)))
return 0;
- printk(KERN_INFO PFX "PowerNOW! Technology present. Can scale: ");
+ pr_info("PowerNOW! Technology present. Can scale: ");
if (edx & 1 << 1) {
- printk("frequency");
+ pr_cont("frequency");
can_scale_bus = 1;
}
if ((edx & (1 << 1 | 1 << 2)) == 0x6)
- printk(" and ");
+ pr_cont(" and ");
if (edx & 1 << 2) {
- printk("voltage");
+ pr_cont("voltage");
can_scale_vid = 1;
}
- printk(".\n");
+ pr_cont("\n");
return 1;
}
err05:
kfree(acpi_processor_perf);
err0:
- printk(KERN_WARNING PFX "ACPI perflib can not be used on "
- "this platform\n");
+ pr_warn("ACPI perflib can not be used on this platform\n");
acpi_processor_perf = NULL;
return retval;
}
#else
static int powernow_acpi_init(void)
{
- printk(KERN_INFO PFX "no support for ACPI processor found."
- " Please recompile your kernel with ACPI processor\n");
+ pr_info("no support for ACPI processor found - please recompile your kernel with ACPI processor\n");
return -EINVAL;
}
#endif
psb = (struct psb_s *) p;
pr_debug("Table version: 0x%x\n", psb->tableversion);
if (psb->tableversion != 0x12) {
- printk(KERN_INFO PFX "Sorry, only v1.2 tables"
- " supported right now\n");
+ pr_info("Sorry, only v1.2 tables supported right now\n");
return -ENODEV;
}
latency = psb->settlingtime;
if (latency < 100) {
- printk(KERN_INFO PFX "BIOS set settling time "
- "to %d microseconds. "
- "Should be at least 100. "
- "Correcting.\n", latency);
+ pr_info("BIOS set settling time to %d microseconds. Should be at least 100. Correcting.\n",
+ latency);
latency = 100;
}
pr_debug("Settling Time: %d microseconds.\n",
p += 2;
}
}
- printk(KERN_INFO PFX "No PST tables match this cpuid "
- "(0x%x)\n", etuple);
- printk(KERN_INFO PFX "This is indicative of a broken "
- "BIOS.\n");
+ pr_info("No PST tables match this cpuid (0x%x)\n",
+ etuple);
+ pr_info("This is indicative of a broken BIOS\n");
return -EINVAL;
}
sgtc = 100 * m * latency;
sgtc = sgtc / 3;
if (sgtc > 0xfffff) {
- printk(KERN_WARNING PFX "SGTC too large %d\n", sgtc);
+ pr_warn("SGTC too large %d\n", sgtc);
sgtc = 0xfffff;
}
return sgtc;
static int acer_cpufreq_pst(const struct dmi_system_id *d)
{
- printk(KERN_WARNING PFX
- "%s laptop with broken PST tables in BIOS detected.\n",
+ pr_warn("%s laptop with broken PST tables in BIOS detected\n",
d->ident);
- printk(KERN_WARNING PFX
- "You need to downgrade to 3A21 (09/09/2002), or try a newer "
- "BIOS than 3A71 (01/20/2003)\n");
- printk(KERN_WARNING PFX
- "cpufreq scaling has been disabled as a result of this.\n");
+ pr_warn("You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n");
+ pr_warn("cpufreq scaling has been disabled as a result of this\n");
return 0;
}
fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID];
if (!fsb) {
- printk(KERN_WARNING PFX "can not determine bus frequency\n");
+ pr_warn("can not determine bus frequency\n");
return -EINVAL;
}
pr_debug("FSB: %3dMHz\n", fsb/1000);
if (dmi_check_system(powernow_dmi_table) || acpi_force) {
- printk(KERN_INFO PFX "PSB/PST known to be broken. "
- "Trying ACPI instead\n");
+ pr_info("PSB/PST known to be broken - trying ACPI instead\n");
result = powernow_acpi_init();
} else {
result = powernow_decode_bios(fidvidstatus.bits.MFID,
fidvidstatus.bits.SVID);
if (result) {
- printk(KERN_INFO PFX "Trying ACPI perflib\n");
+ pr_info("Trying ACPI perflib\n");
maximum_speed = 0;
minimum_speed = -1;
latency = 0;
result = powernow_acpi_init();
if (result) {
- printk(KERN_INFO PFX
- "ACPI and legacy methods failed\n");
+ pr_info("ACPI and legacy methods failed\n");
}
} else {
/* SGTC use the bus clock as timer */
latency = fixup_sgtc();
- printk(KERN_INFO PFX "SGTC: %d\n", latency);
+ pr_info("SGTC: %d\n", latency);
}
}
if (result)
return result;
- printk(KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n",
- minimum_speed/1000, maximum_speed/1000);
+ pr_info("Minimum speed %d MHz - Maximum speed %d MHz\n",
+ minimum_speed/1000, maximum_speed/1000);
policy->cpuinfo.transition_latency =
cpufreq_scale(2000000UL, fsb, latency);
#include <asm/reg.h>
#include <asm/smp.h> /* Required for cpu_sibling_mask() in UP configs */
#include <asm/opal.h>
+#include <linux/timer.h>
#define POWERNV_MAX_PSTATES 256
#define PMSR_PSAFE_ENABLE (1UL << 30)
#define PMSR_SPR_EM_DISABLE (1UL << 31)
#define PMSR_MAX(x) ((x >> 32) & 0xFF)
+#define MAX_RAMP_DOWN_TIME 5120
+/*
+ * On an idle system we want the global pstate to ramp-down from max value to
+ * min over a span of ~5 secs. Also we want it to initially ramp-down slowly and
+ * then ramp-down rapidly later on.
+ *
+ * This gives a percentage rampdown for time elapsed in milliseconds.
+ * ramp_down_percentage = ((ms * ms) >> 18)
+ * ~= 3.8 * (sec * sec)
+ *
+ * At 0 ms ramp_down_percent = 0
+ * At 5120 ms ramp_down_percent = 100
+ */
+#define ramp_down_percent(time) ((time * time) >> 18)
+
+/* Interval after which the timer is queued to bring down global pstate */
+#define GPSTATE_TIMER_INTERVAL 2000
+
+/**
+ * struct global_pstate_info - Per policy data structure to maintain history of
+ * global pstates
+ * @highest_lpstate: The local pstate from which we are ramping down
+ * @elapsed_time: Time in ms spent in ramping down from
+ * highest_lpstate
+ * @last_sampled_time: Time from boot in ms when global pstates were
+ * last set
+ * @last_lpstate,last_gpstate: Last set values for local and global pstates
+ * @timer: Is used for ramping down if cpu goes idle for
+ * a long time with global pstate held high
+ * @gpstate_lock: A spinlock to maintain synchronization between
+ * routines called by the timer handler and
+ * governer's target_index calls
+ */
+struct global_pstate_info {
+ int highest_lpstate;
+ unsigned int elapsed_time;
+ unsigned int last_sampled_time;
+ int last_lpstate;
+ int last_gpstate;
+ spinlock_t gpstate_lock;
+ struct timer_list timer;
+};
+
static struct cpufreq_frequency_table powernv_freqs[POWERNV_MAX_PSTATES+1];
static bool rebooting, throttled, occ_reset;
int nr_pstates;
} powernv_pstate_info;
+static inline void reset_gpstates(struct cpufreq_policy *policy)
+{
+ struct global_pstate_info *gpstates = policy->driver_data;
+
+ gpstates->highest_lpstate = 0;
+ gpstates->elapsed_time = 0;
+ gpstates->last_sampled_time = 0;
+ gpstates->last_lpstate = 0;
+ gpstates->last_gpstate = 0;
+}
+
/*
* Initialize the freq table based on data obtained
* from the firmware passed via device-tree
struct powernv_smp_call_data {
unsigned int freq;
int pstate_id;
+ int gpstate_id;
};
/*
* (struct powernv_smp_call_data *) and the pstate_id which needs to be set
* on this CPU should be present in freq_data->pstate_id.
*/
-static void set_pstate(void *freq_data)
+static void set_pstate(void *data)
{
unsigned long val;
- unsigned long pstate_ul =
- ((struct powernv_smp_call_data *) freq_data)->pstate_id;
+ struct powernv_smp_call_data *freq_data = data;
+ unsigned long pstate_ul = freq_data->pstate_id;
+ unsigned long gpstate_ul = freq_data->gpstate_id;
val = get_pmspr(SPRN_PMCR);
val = val & 0x0000FFFFFFFFFFFFULL;
pstate_ul = pstate_ul & 0xFF;
+ gpstate_ul = gpstate_ul & 0xFF;
/* Set both global(bits 56..63) and local(bits 48..55) PStates */
- val = val | (pstate_ul << 56) | (pstate_ul << 48);
+ val = val | (gpstate_ul << 56) | (pstate_ul << 48);
pr_debug("Setting cpu %d pmcr to %016lX\n",
raw_smp_processor_id(), val);
}
}
+/**
+ * calc_global_pstate - Calculate global pstate
+ * @elapsed_time: Elapsed time in milliseconds
+ * @local_pstate: New local pstate
+ * @highest_lpstate: pstate from which its ramping down
+ *
+ * Finds the appropriate global pstate based on the pstate from which its
+ * ramping down and the time elapsed in ramping down. It follows a quadratic
+ * equation which ensures that it reaches ramping down to pmin in 5sec.
+ */
+static inline int calc_global_pstate(unsigned int elapsed_time,
+ int highest_lpstate, int local_pstate)
+{
+ int pstate_diff;
+
+ /*
+ * Using ramp_down_percent we get the percentage of rampdown
+ * that we are expecting to be dropping. Difference between
+ * highest_lpstate and powernv_pstate_info.min will give a absolute
+ * number of how many pstates we will drop eventually by the end of
+ * 5 seconds, then just scale it get the number pstates to be dropped.
+ */
+ pstate_diff = ((int)ramp_down_percent(elapsed_time) *
+ (highest_lpstate - powernv_pstate_info.min)) / 100;
+
+ /* Ensure that global pstate is >= to local pstate */
+ if (highest_lpstate - pstate_diff < local_pstate)
+ return local_pstate;
+ else
+ return highest_lpstate - pstate_diff;
+}
+
+static inline void queue_gpstate_timer(struct global_pstate_info *gpstates)
+{
+ unsigned int timer_interval;
+
+ /*
+ * Setting up timer to fire after GPSTATE_TIMER_INTERVAL ms, But
+ * if it exceeds MAX_RAMP_DOWN_TIME ms for ramp down time.
+ * Set timer such that it fires exactly at MAX_RAMP_DOWN_TIME
+ * seconds of ramp down time.
+ */
+ if ((gpstates->elapsed_time + GPSTATE_TIMER_INTERVAL)
+ > MAX_RAMP_DOWN_TIME)
+ timer_interval = MAX_RAMP_DOWN_TIME - gpstates->elapsed_time;
+ else
+ timer_interval = GPSTATE_TIMER_INTERVAL;
+
+ mod_timer_pinned(&gpstates->timer, jiffies +
+ msecs_to_jiffies(timer_interval));
+}
+
+/**
+ * gpstate_timer_handler
+ *
+ * @data: pointer to cpufreq_policy on which timer was queued
+ *
+ * This handler brings down the global pstate closer to the local pstate
+ * according quadratic equation. Queues a new timer if it is still not equal
+ * to local pstate
+ */
+void gpstate_timer_handler(unsigned long data)
+{
+ struct cpufreq_policy *policy = (struct cpufreq_policy *)data;
+ struct global_pstate_info *gpstates = policy->driver_data;
+ int gpstate_id;
+ unsigned int time_diff = jiffies_to_msecs(jiffies)
+ - gpstates->last_sampled_time;
+ struct powernv_smp_call_data freq_data;
+
+ if (!spin_trylock(&gpstates->gpstate_lock))
+ return;
+
+ gpstates->last_sampled_time += time_diff;
+ gpstates->elapsed_time += time_diff;
+ freq_data.pstate_id = gpstates->last_lpstate;
+
+ if ((gpstates->last_gpstate == freq_data.pstate_id) ||
+ (gpstates->elapsed_time > MAX_RAMP_DOWN_TIME)) {
+ gpstate_id = freq_data.pstate_id;
+ reset_gpstates(policy);
+ gpstates->highest_lpstate = freq_data.pstate_id;
+ } else {
+ gpstate_id = calc_global_pstate(gpstates->elapsed_time,
+ gpstates->highest_lpstate,
+ freq_data.pstate_id);
+ }
+
+ /*
+ * If local pstate is equal to global pstate, rampdown is over
+ * So timer is not required to be queued.
+ */
+ if (gpstate_id != freq_data.pstate_id)
+ queue_gpstate_timer(gpstates);
+
+ freq_data.gpstate_id = gpstate_id;
+ gpstates->last_gpstate = freq_data.gpstate_id;
+ gpstates->last_lpstate = freq_data.pstate_id;
+
+ spin_unlock(&gpstates->gpstate_lock);
+
+ /* Timer may get migrated to a different cpu on cpu hot unplug */
+ smp_call_function_any(policy->cpus, set_pstate, &freq_data, 1);
+}
+
/*
* powernv_cpufreq_target_index: Sets the frequency corresponding to
* the cpufreq table entry indexed by new_index on the cpus in the
unsigned int new_index)
{
struct powernv_smp_call_data freq_data;
+ unsigned int cur_msec, gpstate_id;
+ struct global_pstate_info *gpstates = policy->driver_data;
if (unlikely(rebooting) && new_index != get_nominal_index())
return 0;
if (!throttled)
powernv_cpufreq_throttle_check(NULL);
+ cur_msec = jiffies_to_msecs(get_jiffies_64());
+
+ spin_lock(&gpstates->gpstate_lock);
freq_data.pstate_id = powernv_freqs[new_index].driver_data;
+ if (!gpstates->last_sampled_time) {
+ gpstate_id = freq_data.pstate_id;
+ gpstates->highest_lpstate = freq_data.pstate_id;
+ goto gpstates_done;
+ }
+
+ if (gpstates->last_gpstate > freq_data.pstate_id) {
+ gpstates->elapsed_time += cur_msec -
+ gpstates->last_sampled_time;
+
+ /*
+ * If its has been ramping down for more than MAX_RAMP_DOWN_TIME
+ * we should be resetting all global pstate related data. Set it
+ * equal to local pstate to start fresh.
+ */
+ if (gpstates->elapsed_time > MAX_RAMP_DOWN_TIME) {
+ reset_gpstates(policy);
+ gpstates->highest_lpstate = freq_data.pstate_id;
+ gpstate_id = freq_data.pstate_id;
+ } else {
+ /* Elaspsed_time is less than 5 seconds, continue to rampdown */
+ gpstate_id = calc_global_pstate(gpstates->elapsed_time,
+ gpstates->highest_lpstate,
+ freq_data.pstate_id);
+ }
+ } else {
+ reset_gpstates(policy);
+ gpstates->highest_lpstate = freq_data.pstate_id;
+ gpstate_id = freq_data.pstate_id;
+ }
+
+ /*
+ * If local pstate is equal to global pstate, rampdown is over
+ * So timer is not required to be queued.
+ */
+ if (gpstate_id != freq_data.pstate_id)
+ queue_gpstate_timer(gpstates);
+ else
+ del_timer_sync(&gpstates->timer);
+
+gpstates_done:
+ freq_data.gpstate_id = gpstate_id;
+ gpstates->last_sampled_time = cur_msec;
+ gpstates->last_gpstate = freq_data.gpstate_id;
+ gpstates->last_lpstate = freq_data.pstate_id;
+
+ spin_unlock(&gpstates->gpstate_lock);
+
/*
* Use smp_call_function to send IPI and execute the
* mtspr on target CPU. We could do that without IPI
* if current CPU is within policy->cpus (core)
*/
smp_call_function_any(policy->cpus, set_pstate, &freq_data, 1);
-
return 0;
}
static int powernv_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
- int base, i;
+ int base, i, ret;
+ struct kernfs_node *kn;
+ struct global_pstate_info *gpstates;
base = cpu_first_thread_sibling(policy->cpu);
for (i = 0; i < threads_per_core; i++)
cpumask_set_cpu(base + i, policy->cpus);
- if (!policy->driver_data) {
+ kn = kernfs_find_and_get(policy->kobj.sd, throttle_attr_grp.name);
+ if (!kn) {
int ret;
ret = sysfs_create_group(&policy->kobj, &throttle_attr_grp);
policy->cpu);
return ret;
}
- /*
- * policy->driver_data is used as a flag for one-time
- * creation of throttle sysfs files.
- */
- policy->driver_data = policy;
+ } else {
+ kernfs_put(kn);
}
- return cpufreq_table_validate_and_show(policy, powernv_freqs);
+
+ gpstates = kzalloc(sizeof(*gpstates), GFP_KERNEL);
+ if (!gpstates)
+ return -ENOMEM;
+
+ policy->driver_data = gpstates;
+
+ /* initialize timer */
+ init_timer_deferrable(&gpstates->timer);
+ gpstates->timer.data = (unsigned long)policy;
+ gpstates->timer.function = gpstate_timer_handler;
+ gpstates->timer.expires = jiffies +
+ msecs_to_jiffies(GPSTATE_TIMER_INTERVAL);
+ spin_lock_init(&gpstates->gpstate_lock);
+ ret = cpufreq_table_validate_and_show(policy, powernv_freqs);
+
+ if (ret < 0)
+ kfree(policy->driver_data);
+
+ return ret;
+}
+
+static int powernv_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+ /* timer is deleted in cpufreq_cpu_stop() */
+ kfree(policy->driver_data);
+
+ return 0;
}
static int powernv_cpufreq_reboot_notifier(struct notifier_block *nb,
static void powernv_cpufreq_stop_cpu(struct cpufreq_policy *policy)
{
struct powernv_smp_call_data freq_data;
+ struct global_pstate_info *gpstates = policy->driver_data;
freq_data.pstate_id = powernv_pstate_info.min;
+ freq_data.gpstate_id = powernv_pstate_info.min;
smp_call_function_single(policy->cpu, set_pstate, &freq_data, 1);
+ del_timer_sync(&gpstates->timer);
}
static struct cpufreq_driver powernv_cpufreq_driver = {
.name = "powernv-cpufreq",
.flags = CPUFREQ_CONST_LOOPS,
.init = powernv_cpufreq_cpu_init,
+ .exit = powernv_cpufreq_cpu_exit,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = powernv_cpufreq_target_index,
.get = powernv_cpufreq_get,
int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode);
-#if defined(CONFIG_CPU_FREQ_CBE_PMI) || defined(CONFIG_CPU_FREQ_CBE_PMI_MODULE)
+#if IS_ENABLED(CONFIG_CPU_FREQ_CBE_PMI)
extern bool cbe_cpufreq_has_pmi;
#else
#define cbe_cpufreq_has_pmi (0)
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/timer.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/of_platform.h>
#include <asm/processor.h>
return 0;
}
-
-static void __exit cbe_cpufreq_pmi_exit(void)
-{
- cpufreq_unregister_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER);
- pmi_unregister_handler(&cbe_pmi_handler);
-}
-
-module_init(cbe_cpufreq_pmi_init);
-module_exit(cbe_cpufreq_pmi_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
+device_initcall(cbe_cpufreq_pmi_init);
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/sched.h>
ret = regulator_set_voltage(vcc_core, vmin, vmax);
if (ret)
- pr_err("cpufreq: Failed to set vcc_core in [%dmV..%dmV]\n",
- vmin, vmax);
+ pr_err("Failed to set vcc_core in [%dmV..%dmV]\n", vmin, vmax);
return ret;
}
{
vcc_core = regulator_get(NULL, "vcc_core");
if (IS_ERR(vcc_core)) {
- pr_info("cpufreq: Didn't find vcc_core regulator\n");
+ pr_info("Didn't find vcc_core regulator\n");
vcc_core = NULL;
} else {
- pr_info("cpufreq: Found vcc_core regulator\n");
+ pr_info("Found vcc_core regulator\n");
}
}
#else
{
if (!pxa27x_maxfreq) {
pxa27x_maxfreq = 416000;
- printk(KERN_INFO "PXA CPU 27x max frequency not defined "
- "(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
- pxa27x_maxfreq);
+ pr_info("PXA CPU 27x max frequency not defined (pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
+ pxa27x_maxfreq);
} else {
pxa27x_maxfreq *= 1000;
}
*/
if (cpu_is_pxa25x()) {
find_freq_tables(&pxa255_freq_table, &pxa255_freqs);
- pr_info("PXA255 cpufreq using %s frequency table\n",
+ pr_info("using %s frequency table\n",
pxa255_turbo_table ? "turbo" : "run");
cpufreq_table_validate_and_show(policy, pxa255_freq_table);
cpufreq_table_validate_and_show(policy, pxa27x_freq_table);
}
- printk(KERN_INFO "PXA CPU frequency change support initialized\n");
+ pr_info("frequency change support initialized\n");
return 0;
}
return -ENODEV;
}
-static int __exit qoriq_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+static int qoriq_cpufreq_cpu_exit(struct cpufreq_policy *policy)
{
struct cpu_data *data = policy->driver_data;
+ cpufreq_cooling_unregister(data->cdev);
kfree(data->pclk);
kfree(data->table);
kfree(data);
cpud->cdev = of_cpufreq_cooling_register(np,
policy->related_cpus);
- if (IS_ERR(cpud->cdev)) {
- pr_err("Failed to register cooling device cpu%d: %ld\n",
+ if (IS_ERR(cpud->cdev) && PTR_ERR(cpud->cdev) != -ENOSYS) {
+ pr_err("cpu%d is not running as cooling device: %ld\n",
policy->cpu, PTR_ERR(cpud->cdev));
cpud->cdev = NULL;
.name = "qoriq_cpufreq",
.flags = CPUFREQ_CONST_LOOPS,
.init = qoriq_cpufreq_cpu_init,
- .exit = __exit_p(qoriq_cpufreq_cpu_exit),
+ .exit = qoriq_cpufreq_cpu_exit,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = qoriq_cpufreq_target,
.get = cpufreq_generic_get,
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
hclk = clk_get(NULL, "hclk");
if (IS_ERR(hclk)) {
- printk(KERN_ERR "%s: cannot find hclk clock\n", __func__);
+ pr_err("cannot find hclk clock\n");
return -ENOENT;
}
fclk = clk_get(NULL, "fclk");
if (IS_ERR(fclk)) {
- printk(KERN_ERR "%s: cannot find fclk clock\n", __func__);
+ pr_err("cannot find fclk clock\n");
goto err_fclk;
}
fclk_rate = clk_get_rate(fclk);
if (fclk_rate > 200000000) {
- printk(KERN_INFO
- "%s: fclk %ld MHz, assuming 266MHz capable part\n",
- __func__, fclk_rate / 1000000);
+ pr_info("fclk %ld MHz, assuming 266MHz capable part\n",
+ fclk_rate / 1000000);
s3c2412_cpufreq_info.max.fclk = 266000000;
s3c2412_cpufreq_info.max.hclk = 133000000;
s3c2412_cpufreq_info.max.pclk = 66000000;
armclk = clk_get(NULL, "armclk");
if (IS_ERR(armclk)) {
- printk(KERN_ERR "%s: cannot find arm clock\n", __func__);
+ pr_err("cannot find arm clock\n");
goto err_armclk;
}
xtal = clk_get(NULL, "xtal");
if (IS_ERR(xtal)) {
- printk(KERN_ERR "%s: cannot find xtal clock\n", __func__);
+ pr_err("cannot find xtal clock\n");
goto err_xtal;
}
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
__func__, fclk, armclk, hclk_max);
if (armclk > fclk) {
- printk(KERN_WARNING "%s: armclk > fclk\n", __func__);
+ pr_warn("%s: armclk > fclk\n", __func__);
armclk = fclk;
}
armclk = s3c_cpufreq_clk_get(NULL, "armclk");
if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
- printk(KERN_ERR "%s: failed to get clocks\n", __func__);
+ pr_err("%s: failed to get clocks\n", __func__);
return -ENOENT;
}
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/export.h>
#include <linux/interrupt.h>
{
dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL);
if (IS_ERR(dbgfs_root)) {
- printk(KERN_ERR "%s: error creating debugfs root\n", __func__);
+ pr_err("%s: error creating debugfs root\n", __func__);
return PTR_ERR(dbgfs_root);
}
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
cpu_new.freq.fclk = cpu_new.pll.frequency;
if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
- printk(KERN_ERR "no divisors for %d\n", target_freq);
+ pr_err("no divisors for %d\n", target_freq);
goto err_notpossible;
}
if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
if (s3c_cpufreq_calcio(&cpu_new) < 0) {
- printk(KERN_ERR "%s: no IO timings\n", __func__);
+ pr_err("%s: no IO timings\n", __func__);
goto err_notpossible;
}
}
return 0;
err_notpossible:
- printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+ pr_err("no compatible settings for %d\n", target_freq);
return -EINVAL;
}
&index);
if (ret < 0) {
- printk(KERN_ERR "%s: no PLL available\n", __func__);
+ pr_err("%s: no PLL available\n", __func__);
goto err_notpossible;
}
return s3c_cpufreq_settarget(policy, target_freq, pll);
err_notpossible:
- printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+ pr_err("no compatible settings for %d\n", target_freq);
return -EINVAL;
}
clk = clk_get(dev, name);
if (IS_ERR(clk))
- printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name);
+ pr_err("failed to get clock '%s'\n", name);
return clk;
}
if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
- printk(KERN_ERR "%s: could not get clock(s)\n", __func__);
+ pr_err("%s: could not get clock(s)\n", __func__);
return -ENOENT;
}
- printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__,
- clk_get_rate(clk_fclk) / 1000,
- clk_get_rate(clk_hclk) / 1000,
- clk_get_rate(clk_pclk) / 1000,
- clk_get_rate(clk_arm) / 1000);
+ pr_info("%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n",
+ __func__,
+ clk_get_rate(clk_fclk) / 1000,
+ clk_get_rate(clk_hclk) / 1000,
+ clk_get_rate(clk_pclk) / 1000,
+ clk_get_rate(clk_arm) / 1000);
return 0;
}
ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
if (ret) {
- printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__);
+ pr_err("%s: failed to reset pll/freq\n", __func__);
return ret;
}
int s3c_cpufreq_register(struct s3c_cpufreq_info *info)
{
if (!info || !info->name) {
- printk(KERN_ERR "%s: failed to pass valid information\n",
- __func__);
+ pr_err("%s: failed to pass valid information\n", __func__);
return -EINVAL;
}
- printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n",
- info->name);
+ pr_info("S3C24XX CPU Frequency driver, %s cpu support\n",
+ info->name);
/* check our driver info has valid data */
struct s3c_cpufreq_board *ours;
if (!board) {
- printk(KERN_INFO "%s: no board data\n", __func__);
+ pr_info("%s: no board data\n", __func__);
return -EINVAL;
}
ours = kzalloc(sizeof(*ours), GFP_KERNEL);
if (ours == NULL) {
- printk(KERN_ERR "%s: no memory\n", __func__);
+ pr_err("%s: no memory\n", __func__);
return -ENOMEM;
}
int ret;
if (!cpu_cur.info->get_iotiming) {
- printk(KERN_ERR "%s: get_iotiming undefined\n", __func__);
+ pr_err("%s: get_iotiming undefined\n", __func__);
return -ENOENT;
}
- printk(KERN_INFO "%s: working out IO settings\n", __func__);
+ pr_info("%s: working out IO settings\n", __func__);
ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
if (ret)
- printk(KERN_ERR "%s: failed to get timings\n", __func__);
+ pr_err("%s: failed to get timings\n", __func__);
return ret;
}
val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
val |= calc_locktime(rate, cpu_cur.info->locktime_m);
- printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val);
+ pr_info("%s: new locktime is 0x%08x\n", __func__, val);
__raw_writel(val, S3C2410_LOCKTIME);
}
ftab = kzalloc(sizeof(*ftab) * size, GFP_KERNEL);
if (!ftab) {
- printk(KERN_ERR "%s: no memory for tables\n", __func__);
+ pr_err("%s: no memory for tables\n", __func__);
return -ENOMEM;
}
if (cpu_cur.board->auto_io) {
ret = s3c_cpufreq_auto_io();
if (ret) {
- printk(KERN_ERR "%s: failed to get io timing\n",
+ pr_err("%s: failed to get io timing\n",
__func__);
goto out;
}
}
if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
- printk(KERN_ERR "%s: no IO support registered\n",
- __func__);
+ pr_err("%s: no IO support registered\n", __func__);
ret = -EINVAL;
goto out;
}
vals += plls_no;
vals->frequency = CPUFREQ_TABLE_END;
- printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no);
+ pr_info("%d PLL entries\n", plls_no);
} else
- printk(KERN_ERR "cpufreq: no memory for PLL tables\n");
+ pr_err("no memory for PLL tables\n");
return vals ? 0 : -ENOMEM;
}
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
} else if (ch == DMC1) {
reg = (dmc_base[1] + 0x30);
} else {
- printk(KERN_ERR "Cannot find DMC port\n");
+ pr_err("Cannot find DMC port\n");
return;
}
mem_type = check_mem_type(dmc_base[0]);
if ((mem_type != LPDDR) && (mem_type != LPDDR2)) {
- printk(KERN_ERR "CPUFreq doesn't support this memory type\n");
+ pr_err("CPUFreq doesn't support this memory type\n");
ret = -EINVAL;
goto out_dmc1;
}
arm_regulator = regulator_get(NULL, "vddarm");
if (IS_ERR(arm_regulator)) {
- pr_err("failed to get regulator vddarm");
+ pr_err("failed to get regulator vddarm\n");
return PTR_ERR(arm_regulator);
}
int_regulator = regulator_get(NULL, "vddint");
if (IS_ERR(int_regulator)) {
- pr_err("failed to get regulator vddint");
+ pr_err("failed to get regulator vddint\n");
regulator_put(arm_regulator);
return PTR_ERR(int_regulator);
}
* 2005-03-30: - initial revision
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
static __u8 __iomem *cpuctl;
-#define PFX "sc520_freq: "
-
static struct cpufreq_frequency_table sc520_freq_table[] = {
{0, 0x01, 100000},
{0, 0x02, 133000},
switch (clockspeed_reg & 0x03) {
default:
- printk(KERN_ERR PFX "error: cpuctl register has unexpected "
- "value %02x\n", clockspeed_reg);
+ pr_err("error: cpuctl register has unexpected value %02x\n",
+ clockspeed_reg);
case 0x01:
return 100000;
case 0x02:
cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1);
if (!cpuctl) {
- printk(KERN_ERR "sc520_freq: error: failed to remap memory\n");
+ pr_err("sc520_freq: error: failed to remap memory\n");
return -ENOMEM;
}
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/cpu.h>
#include <linux/cpufreq.h>
#include <linux/module.h>
#include <linux/platform_device.h>
return scpi_ops->dvfs_get_info(domain);
}
-static int scpi_opp_table_ops(struct device *cpu_dev, bool remove)
+static int scpi_get_transition_latency(struct device *cpu_dev)
{
- int idx, ret = 0;
+ struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev);
+
+ if (IS_ERR(info))
+ return PTR_ERR(info);
+ return info->latency;
+}
+
+static int scpi_init_opp_table(const struct cpumask *cpumask)
+{
+ int idx, ret;
struct scpi_opp *opp;
+ struct device *cpu_dev = get_cpu_device(cpumask_first(cpumask));
struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev);
if (IS_ERR(info))
return -EIO;
for (opp = info->opps, idx = 0; idx < info->count; idx++, opp++) {
- if (remove)
- dev_pm_opp_remove(cpu_dev, opp->freq);
- else
- ret = dev_pm_opp_add(cpu_dev, opp->freq,
- opp->m_volt * 1000);
+ ret = dev_pm_opp_add(cpu_dev, opp->freq, opp->m_volt * 1000);
if (ret) {
dev_warn(cpu_dev, "failed to add opp %uHz %umV\n",
opp->freq, opp->m_volt);
return ret;
}
}
- return ret;
-}
-static int scpi_get_transition_latency(struct device *cpu_dev)
-{
- struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev);
-
- if (IS_ERR(info))
- return PTR_ERR(info);
- return info->latency;
-}
-
-static int scpi_init_opp_table(struct device *cpu_dev)
-{
- return scpi_opp_table_ops(cpu_dev, false);
-}
-
-static void scpi_free_opp_table(struct device *cpu_dev)
-{
- scpi_opp_table_ops(cpu_dev, true);
+ ret = dev_pm_opp_set_sharing_cpus(cpu_dev, cpumask);
+ if (ret)
+ dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
+ __func__, ret);
+ return ret;
}
static struct cpufreq_arm_bL_ops scpi_cpufreq_ops = {
.name = "scpi",
.get_transition_latency = scpi_get_transition_latency,
.init_opp_table = scpi_init_opp_table,
- .free_opp_table = scpi_free_opp_table,
+ .free_opp_table = dev_pm_opp_cpumask_remove_table,
};
static int scpi_cpufreq_probe(struct platform_device *pdev)
* Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org>
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <asm/cpufeature.h>
#include <asm/cpu_device_id.h>
-#define PFX "speedstep-centrino: "
#define MAINTAINER "linux-pm@vger.kernel.org"
#define INTEL_MSR_RANGE (0xffff)
/* check to see if it stuck */
rdmsr(MSR_IA32_MISC_ENABLE, l, h);
if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
- printk(KERN_INFO PFX
- "couldn't enable Enhanced SpeedStep\n");
+ pr_info("couldn't enable Enhanced SpeedStep\n");
return -ENODEV;
}
}
* SPEEDSTEP - DEFINITIONS *
*********************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
/* get PMBASE */
pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase);
if (!(pmbase & 0x01)) {
- printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
+ pr_err("could not find speedstep register\n");
return -ENODEV;
}
pmbase &= 0xFFFFFFFE;
if (!pmbase) {
- printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
+ pr_err("could not find speedstep register\n");
return -ENODEV;
}
pr_debug("change to %u MHz succeeded\n",
speedstep_get_frequency(speedstep_processor) / 1000);
else
- printk(KERN_ERR "cpufreq: change failed - I/O error\n");
+ pr_err("change failed - I/O error\n");
return;
}
* BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
fsb = 333333;
break;
default:
- printk(KERN_ERR "PCORE - MSR_FSB_FREQ undefined value");
+ pr_err("PCORE - MSR_FSB_FREQ undefined value\n");
}
rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
*/
if (*transition_latency > 10000000 ||
*transition_latency < 50000) {
- printk(KERN_WARNING PFX "frequency transition "
- "measured seems out of range (%u "
- "nSec), falling back to a safe one of"
- "%u nSec.\n",
- *transition_latency, 500000);
+ pr_warn("frequency transition measured seems out of range (%u nSec), falling back to a safe one of %u nSec\n",
+ *transition_latency, 500000);
*transition_latency = 500000;
}
}
* SPEEDSTEP - DEFINITIONS *
*********************************************************************/
+#define pr_fmt(fmt) "cpufreq: " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
(speedstep_freqs[new_state].frequency / 1000),
retry, result);
else
- printk(KERN_ERR "cpufreq: change to state %u "
- "failed with new_state %u and result %u\n",
- state, new_state, result);
+ pr_err("change to state %u failed with new_state %u and result %u\n",
+ state, new_state, result);
return;
}
{
int ret;
+ if ((!of_machine_is_compatible("st,stih407")) &&
+ (!of_machine_is_compatible("st,stih410")))
+ return -ENODEV;
+
ddata.cpu = get_cpu_device(0);
if (!ddata.cpu) {
dev_err(ddata.cpu, "Failed to get device for CPU0\n");
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/clk.h>
-#include <linux/cpufreq-dt.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/kernel.h>
clk_set_parent(priv->cpu_clk, priv->pllx_clk);
}
-static struct cpufreq_dt_platform_data cpufreq_dt_pd = {
- .independent_clocks = false,
-};
-
static int tegra124_cpufreq_probe(struct platform_device *pdev)
{
struct tegra124_cpufreq_priv *priv;
cpufreq_dt_devinfo.name = "cpufreq-dt";
cpufreq_dt_devinfo.parent = &pdev->dev;
- cpufreq_dt_devinfo.data = &cpufreq_dt_pd;
- cpufreq_dt_devinfo.size_data = sizeof(cpufreq_dt_pd);
priv->cpufreq_dt_pdev =
platform_device_register_full(&cpufreq_dt_devinfo);
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#include <linux/cpu.h>
#include <linux/cpufreq.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include "arm_big_little.h"
-static int ve_spc_init_opp_table(struct device *cpu_dev)
+static int ve_spc_init_opp_table(const struct cpumask *cpumask)
{
+ struct device *cpu_dev = get_cpu_device(cpumask_first(cpumask));
/*
* platform specific SPC code must initialise the opp table
* so just check if the OPP count is non-zero
* call the CPU ops suspend protocol with idle index as a
* parameter.
*/
- arm_cpuidle_suspend(idx);
+ ret = arm_cpuidle_suspend(idx);
cpu_pm_exit();
}
struct cpuidle_state *target_state = &drv->states[index];
bool broadcast = !!(target_state->flags & CPUIDLE_FLAG_TIMER_STOP);
- ktime_t time_start, time_end;
+ u64 time_start, time_end;
s64 diff;
/*
sched_idle_set_state(target_state);
trace_cpu_idle_rcuidle(index, dev->cpu);
- time_start = ktime_get();
+ time_start = local_clock();
stop_critical_timings();
entered_state = target_state->enter(dev, drv, index);
start_critical_timings();
- time_end = ktime_get();
+ time_end = local_clock();
trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, dev->cpu);
/* The cpu is no longer idle or about to enter idle. */
if (!cpuidle_state_is_coupled(drv, entered_state))
local_irq_enable();
- diff = ktime_to_us(ktime_sub(time_end, time_start));
+ /*
+ * local_clock() returns the time in nanosecond, let's shift
+ * by 10 (divide by 1024) to have microsecond based time.
+ */
+ diff = (time_end - time_start) >> 10;
if (diff > INT_MAX)
diff = INT_MAX;
list_del(&dev->device_list);
per_cpu(cpuidle_devices, dev->cpu) = NULL;
module_put(drv->owner);
+
+ dev->registered = 0;
}
static void __cpuidle_device_init(struct cpuidle_device *dev)
ptr->eptr = upper_32_bits(dma_addr);
}
+static void copy_talitos_ptr(struct talitos_ptr *dst_ptr,
+ struct talitos_ptr *src_ptr, bool is_sec1)
+{
+ dst_ptr->ptr = src_ptr->ptr;
+ if (!is_sec1)
+ dst_ptr->eptr = src_ptr->eptr;
+}
+
static void to_talitos_ptr_len(struct talitos_ptr *ptr, unsigned int len,
bool is_sec1)
{
sg_count = dma_map_sg(dev, areq->src, edesc->src_nents ?: 1,
(areq->src == areq->dst) ? DMA_BIDIRECTIONAL
: DMA_TO_DEVICE);
-
/* hmac data */
desc->ptr[1].len = cpu_to_be16(areq->assoclen);
if (sg_count > 1 &&
(ret = sg_to_link_tbl_offset(areq->src, sg_count, 0,
areq->assoclen,
&edesc->link_tbl[tbl_off])) > 1) {
- tbl_off += ret;
-
to_talitos_ptr(&desc->ptr[1], edesc->dma_link_tbl + tbl_off *
sizeof(struct talitos_ptr), 0);
desc->ptr[1].j_extent = DESC_PTR_LNKTBL_JUMP;
dma_sync_single_for_device(dev, edesc->dma_link_tbl,
edesc->dma_len, DMA_BIDIRECTIONAL);
+
+ tbl_off += ret;
} else {
to_talitos_ptr(&desc->ptr[1], sg_dma_address(areq->src), 0);
desc->ptr[1].j_extent = 0;
if (edesc->desc.hdr & DESC_HDR_MODE1_MDEU_CICV)
sg_link_tbl_len += authsize;
- if (sg_count > 1 &&
- (ret = sg_to_link_tbl_offset(areq->src, sg_count, areq->assoclen,
- sg_link_tbl_len,
- &edesc->link_tbl[tbl_off])) > 1) {
- tbl_off += ret;
+ if (sg_count == 1) {
+ to_talitos_ptr(&desc->ptr[4], sg_dma_address(areq->src) +
+ areq->assoclen, 0);
+ } else if ((ret = sg_to_link_tbl_offset(areq->src, sg_count,
+ areq->assoclen, sg_link_tbl_len,
+ &edesc->link_tbl[tbl_off])) >
+ 1) {
desc->ptr[4].j_extent |= DESC_PTR_LNKTBL_JUMP;
to_talitos_ptr(&desc->ptr[4], edesc->dma_link_tbl +
tbl_off *
dma_sync_single_for_device(dev, edesc->dma_link_tbl,
edesc->dma_len,
DMA_BIDIRECTIONAL);
- } else
- to_talitos_ptr(&desc->ptr[4], sg_dma_address(areq->src), 0);
+ tbl_off += ret;
+ } else {
+ copy_talitos_ptr(&desc->ptr[4], &edesc->link_tbl[tbl_off], 0);
+ }
/* cipher out */
desc->ptr[5].len = cpu_to_be16(cryptlen);
edesc->icv_ool = false;
- if (sg_count > 1 &&
- (sg_count = sg_to_link_tbl_offset(areq->dst, sg_count,
+ if (sg_count == 1) {
+ to_talitos_ptr(&desc->ptr[5], sg_dma_address(areq->dst) +
+ areq->assoclen, 0);
+ } else if ((sg_count =
+ sg_to_link_tbl_offset(areq->dst, sg_count,
areq->assoclen, cryptlen,
- &edesc->link_tbl[tbl_off])) >
- 1) {
+ &edesc->link_tbl[tbl_off])) > 1) {
struct talitos_ptr *tbl_ptr = &edesc->link_tbl[tbl_off];
to_talitos_ptr(&desc->ptr[5], edesc->dma_link_tbl +
edesc->dma_len, DMA_BIDIRECTIONAL);
edesc->icv_ool = true;
- } else
- to_talitos_ptr(&desc->ptr[5], sg_dma_address(areq->dst), 0);
+ } else {
+ copy_talitos_ptr(&desc->ptr[5], &edesc->link_tbl[tbl_off], 0);
+ }
/* iv out */
map_single_talitos_ptr(dev, &desc->ptr[6], ivsize, ctx->iv,
struct talitos_alg_template algt;
};
-static int talitos_cra_init(struct crypto_tfm *tfm)
+static int talitos_init_common(struct talitos_ctx *ctx,
+ struct talitos_crypto_alg *talitos_alg)
{
- struct crypto_alg *alg = tfm->__crt_alg;
- struct talitos_crypto_alg *talitos_alg;
- struct talitos_ctx *ctx = crypto_tfm_ctx(tfm);
struct talitos_private *priv;
- if ((alg->cra_flags & CRYPTO_ALG_TYPE_MASK) == CRYPTO_ALG_TYPE_AHASH)
- talitos_alg = container_of(__crypto_ahash_alg(alg),
- struct talitos_crypto_alg,
- algt.alg.hash);
- else
- talitos_alg = container_of(alg, struct talitos_crypto_alg,
- algt.alg.crypto);
-
/* update context with ptr to dev */
ctx->dev = talitos_alg->dev;
return 0;
}
+static int talitos_cra_init(struct crypto_tfm *tfm)
+{
+ struct crypto_alg *alg = tfm->__crt_alg;
+ struct talitos_crypto_alg *talitos_alg;
+ struct talitos_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ if ((alg->cra_flags & CRYPTO_ALG_TYPE_MASK) == CRYPTO_ALG_TYPE_AHASH)
+ talitos_alg = container_of(__crypto_ahash_alg(alg),
+ struct talitos_crypto_alg,
+ algt.alg.hash);
+ else
+ talitos_alg = container_of(alg, struct talitos_crypto_alg,
+ algt.alg.crypto);
+
+ return talitos_init_common(ctx, talitos_alg);
+}
+
static int talitos_cra_init_aead(struct crypto_aead *tfm)
{
- talitos_cra_init(crypto_aead_tfm(tfm));
- return 0;
+ struct aead_alg *alg = crypto_aead_alg(tfm);
+ struct talitos_crypto_alg *talitos_alg;
+ struct talitos_ctx *ctx = crypto_aead_ctx(tfm);
+
+ talitos_alg = container_of(alg, struct talitos_crypto_alg,
+ algt.alg.aead);
+
+ return talitos_init_common(ctx, talitos_alg);
}
static int talitos_cra_init_ahash(struct crypto_tfm *tfm)
Otherwise, the governor does not change the frequency
given at the initialization.
+config DEVFREQ_GOV_PASSIVE
+ tristate "Passive"
+ help
+ Sets the frequency based on the frequency of its parent devfreq
+ device. This governor does not change the frequency by itself
+ through sysfs entries. The passive governor recommends that
+ devfreq device uses the OPP table to get the frequency/voltage.
+
comment "DEVFREQ Drivers"
-config ARM_EXYNOS4_BUS_DEVFREQ
- bool "ARM Exynos4210/4212/4412 Memory Bus DEVFREQ Driver"
- depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412) && !ARCH_MULTIPLATFORM
+config ARM_EXYNOS_BUS_DEVFREQ
+ bool "ARM EXYNOS Generic Memory Bus DEVFREQ Driver"
+ depends on ARCH_EXYNOS
select DEVFREQ_GOV_SIMPLE_ONDEMAND
+ select DEVFREQ_GOV_PASSIVE
+ select DEVFREQ_EVENT_EXYNOS_PPMU
+ select PM_DEVFREQ_EVENT
select PM_OPP
help
- This adds the DEVFREQ driver for Exynos4210 memory bus (vdd_int)
- and Exynos4212/4412 memory interface and bus (vdd_mif + vdd_int).
- It reads PPMU counters of memory controllers and adjusts
- the operating frequencies and voltages with OPP support.
+ This adds the common DEVFREQ driver for Exynos Memory bus. Exynos
+ Memory bus has one more group of memory bus (e.g, MIF and INT block).
+ Each memory bus group could contain many memoby bus block. It reads
+ PPMU counters of memory controllers by using DEVFREQ-event device
+ and adjusts the operating frequencies and voltages with OPP support.
This does not yet operate with optimal voltages.
-config ARM_EXYNOS5_BUS_DEVFREQ
- tristate "ARM Exynos5250 Bus DEVFREQ Driver"
- depends on SOC_EXYNOS5250
- select DEVFREQ_GOV_SIMPLE_ONDEMAND
- select PM_OPP
- help
- This adds the DEVFREQ driver for Exynos5250 bus interface (vdd_int).
- It reads PPMU counters of memory controllers and adjusts the
- operating frequencies and voltages with OPP support.
-
config ARM_TEGRA_DEVFREQ
tristate "Tegra DEVFREQ Driver"
depends on ARCH_TEGRA_124_SOC
obj-$(CONFIG_DEVFREQ_GOV_PERFORMANCE) += governor_performance.o
obj-$(CONFIG_DEVFREQ_GOV_POWERSAVE) += governor_powersave.o
obj-$(CONFIG_DEVFREQ_GOV_USERSPACE) += governor_userspace.o
+obj-$(CONFIG_DEVFREQ_GOV_PASSIVE) += governor_passive.o
# DEVFREQ Drivers
-obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos/
-obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos/
+obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ) += exynos-bus.o
obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra-devfreq.o
# DEVFREQ Event Drivers
return ERR_PTR(-ENODEV);
mutex_lock(&devfreq_event_list_lock);
+ list_for_each_entry(edev, &devfreq_event_list, node) {
+ if (edev->dev.parent && edev->dev.parent->of_node == node)
+ goto out;
+ }
+
list_for_each_entry(edev, &devfreq_event_list, node) {
if (!strcmp(edev->desc->name, node->name))
goto out;
#include <linux/list.h>
#include <linux/printk.h>
#include <linux/hrtimer.h>
+#include <linux/of.h>
#include "governor.h"
static struct class *devfreq_class;
return ERR_PTR(-ENODEV);
}
+static int devfreq_notify_transition(struct devfreq *devfreq,
+ struct devfreq_freqs *freqs, unsigned int state)
+{
+ if (!devfreq)
+ return -EINVAL;
+
+ switch (state) {
+ case DEVFREQ_PRECHANGE:
+ srcu_notifier_call_chain(&devfreq->transition_notifier_list,
+ DEVFREQ_PRECHANGE, freqs);
+ break;
+
+ case DEVFREQ_POSTCHANGE:
+ srcu_notifier_call_chain(&devfreq->transition_notifier_list,
+ DEVFREQ_POSTCHANGE, freqs);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
/* Load monitoring helper functions for governors use */
/**
*/
int update_devfreq(struct devfreq *devfreq)
{
- unsigned long freq;
+ struct devfreq_freqs freqs;
+ unsigned long freq, cur_freq;
int err = 0;
u32 flags = 0;
flags |= DEVFREQ_FLAG_LEAST_UPPER_BOUND; /* Use LUB */
}
+ if (devfreq->profile->get_cur_freq)
+ devfreq->profile->get_cur_freq(devfreq->dev.parent, &cur_freq);
+ else
+ cur_freq = devfreq->previous_freq;
+
+ freqs.old = cur_freq;
+ freqs.new = freq;
+ devfreq_notify_transition(devfreq, &freqs, DEVFREQ_PRECHANGE);
+
err = devfreq->profile->target(devfreq->dev.parent, &freq, flags);
if (err)
return err;
+ freqs.new = freq;
+ devfreq_notify_transition(devfreq, &freqs, DEVFREQ_POSTCHANGE);
+
if (devfreq->profile->freq_table)
if (devfreq_update_status(devfreq, freq))
dev_err(&devfreq->dev,
goto err_out;
}
+ srcu_init_notifier_head(&devfreq->transition_notifier_list);
+
mutex_unlock(&devfreq->lock);
mutex_lock(&devfreq_list_lock);
}
EXPORT_SYMBOL(devm_devfreq_add_device);
+#ifdef CONFIG_OF
+/*
+ * devfreq_get_devfreq_by_phandle - Get the devfreq device from devicetree
+ * @dev - instance to the given device
+ * @index - index into list of devfreq
+ *
+ * return the instance of devfreq device
+ */
+struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev, int index)
+{
+ struct device_node *node;
+ struct devfreq *devfreq;
+
+ if (!dev)
+ return ERR_PTR(-EINVAL);
+
+ if (!dev->of_node)
+ return ERR_PTR(-EINVAL);
+
+ node = of_parse_phandle(dev->of_node, "devfreq", index);
+ if (!node)
+ return ERR_PTR(-ENODEV);
+
+ mutex_lock(&devfreq_list_lock);
+ list_for_each_entry(devfreq, &devfreq_list, node) {
+ if (devfreq->dev.parent
+ && devfreq->dev.parent->of_node == node) {
+ mutex_unlock(&devfreq_list_lock);
+ return devfreq;
+ }
+ }
+ mutex_unlock(&devfreq_list_lock);
+
+ return ERR_PTR(-EPROBE_DEFER);
+}
+#else
+struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev, int index)
+{
+ return ERR_PTR(-ENODEV);
+}
+#endif /* CONFIG_OF */
+EXPORT_SYMBOL_GPL(devfreq_get_devfreq_by_phandle);
+
/**
* devm_devfreq_remove_device() - Resource-managed devfreq_remove_device()
* @dev: the device to add devfreq feature.
}
EXPORT_SYMBOL(devm_devfreq_unregister_opp_notifier);
+/**
+ * devfreq_register_notifier() - Register a driver with devfreq
+ * @devfreq: The devfreq object.
+ * @nb: The notifier block to register.
+ * @list: DEVFREQ_TRANSITION_NOTIFIER.
+ */
+int devfreq_register_notifier(struct devfreq *devfreq,
+ struct notifier_block *nb,
+ unsigned int list)
+{
+ int ret = 0;
+
+ if (!devfreq)
+ return -EINVAL;
+
+ switch (list) {
+ case DEVFREQ_TRANSITION_NOTIFIER:
+ ret = srcu_notifier_chain_register(
+ &devfreq->transition_notifier_list, nb);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(devfreq_register_notifier);
+
+/*
+ * devfreq_unregister_notifier() - Unregister a driver with devfreq
+ * @devfreq: The devfreq object.
+ * @nb: The notifier block to be unregistered.
+ * @list: DEVFREQ_TRANSITION_NOTIFIER.
+ */
+int devfreq_unregister_notifier(struct devfreq *devfreq,
+ struct notifier_block *nb,
+ unsigned int list)
+{
+ int ret = 0;
+
+ if (!devfreq)
+ return -EINVAL;
+
+ switch (list) {
+ case DEVFREQ_TRANSITION_NOTIFIER:
+ ret = srcu_notifier_chain_unregister(
+ &devfreq->transition_notifier_list, nb);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(devfreq_unregister_notifier);
+
+struct devfreq_notifier_devres {
+ struct devfreq *devfreq;
+ struct notifier_block *nb;
+ unsigned int list;
+};
+
+static void devm_devfreq_notifier_release(struct device *dev, void *res)
+{
+ struct devfreq_notifier_devres *this = res;
+
+ devfreq_unregister_notifier(this->devfreq, this->nb, this->list);
+}
+
+/**
+ * devm_devfreq_register_notifier()
+ - Resource-managed devfreq_register_notifier()
+ * @dev: The devfreq user device. (parent of devfreq)
+ * @devfreq: The devfreq object.
+ * @nb: The notifier block to be unregistered.
+ * @list: DEVFREQ_TRANSITION_NOTIFIER.
+ */
+int devm_devfreq_register_notifier(struct device *dev,
+ struct devfreq *devfreq,
+ struct notifier_block *nb,
+ unsigned int list)
+{
+ struct devfreq_notifier_devres *ptr;
+ int ret;
+
+ ptr = devres_alloc(devm_devfreq_notifier_release, sizeof(*ptr),
+ GFP_KERNEL);
+ if (!ptr)
+ return -ENOMEM;
+
+ ret = devfreq_register_notifier(devfreq, nb, list);
+ if (ret) {
+ devres_free(ptr);
+ return ret;
+ }
+
+ ptr->devfreq = devfreq;
+ ptr->nb = nb;
+ ptr->list = list;
+ devres_add(dev, ptr);
+
+ return 0;
+}
+EXPORT_SYMBOL(devm_devfreq_register_notifier);
+
+/**
+ * devm_devfreq_unregister_notifier()
+ - Resource-managed devfreq_unregister_notifier()
+ * @dev: The devfreq user device. (parent of devfreq)
+ * @devfreq: The devfreq object.
+ * @nb: The notifier block to be unregistered.
+ * @list: DEVFREQ_TRANSITION_NOTIFIER.
+ */
+void devm_devfreq_unregister_notifier(struct device *dev,
+ struct devfreq *devfreq,
+ struct notifier_block *nb,
+ unsigned int list)
+{
+ WARN_ON(devres_release(dev, devm_devfreq_notifier_release,
+ devm_devfreq_dev_match, devfreq));
+}
+EXPORT_SYMBOL(devm_devfreq_unregister_notifier);
+
MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
MODULE_DESCRIPTION("devfreq class support");
MODULE_LICENSE("GPL");
if PM_DEVFREQ_EVENT
+config DEVFREQ_EVENT_EXYNOS_NOCP
+ bool "EXYNOS NoC (Network On Chip) Probe DEVFREQ event Driver"
+ depends on ARCH_EXYNOS
+ select PM_OPP
+ help
+ This add the devfreq-event driver for Exynos SoC. It provides NoC
+ (Network on Chip) Probe counters to measure the bandwidth of AXI bus.
+
config DEVFREQ_EVENT_EXYNOS_PPMU
bool "EXYNOS PPMU (Platform Performance Monitoring Unit) DEVFREQ event Driver"
depends on ARCH_EXYNOS
# Exynos DEVFREQ Event Drivers
+
+obj-$(CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP) += exynos-nocp.o
obj-$(CONFIG_DEVFREQ_EVENT_EXYNOS_PPMU) += exynos-ppmu.o
--- /dev/null
+/*
+ * exynos-nocp.c - EXYNOS NoC (Network On Chip) Probe support
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * Author : Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/devfreq-event.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "exynos-nocp.h"
+
+struct exynos_nocp {
+ struct devfreq_event_dev *edev;
+ struct devfreq_event_desc desc;
+
+ struct device *dev;
+
+ struct regmap *regmap;
+ struct clk *clk;
+};
+
+/*
+ * The devfreq-event ops structure for nocp probe.
+ */
+static int exynos_nocp_set_event(struct devfreq_event_dev *edev)
+{
+ struct exynos_nocp *nocp = devfreq_event_get_drvdata(edev);
+ int ret;
+
+ /* Disable NoC probe */
+ ret = regmap_update_bits(nocp->regmap, NOCP_MAIN_CTL,
+ NOCP_MAIN_CTL_STATEN_MASK, 0);
+ if (ret < 0) {
+ dev_err(nocp->dev, "failed to disable the NoC probe device\n");
+ return ret;
+ }
+
+ /* Set a statistics dump period to 0 */
+ ret = regmap_write(nocp->regmap, NOCP_STAT_PERIOD, 0x0);
+ if (ret < 0)
+ goto out;
+
+ /* Set the IntEvent fields of *_SRC */
+ ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_0_SRC,
+ NOCP_CNT_SRC_INTEVENT_MASK,
+ NOCP_CNT_SRC_INTEVENT_BYTE_MASK);
+ if (ret < 0)
+ goto out;
+
+ ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_1_SRC,
+ NOCP_CNT_SRC_INTEVENT_MASK,
+ NOCP_CNT_SRC_INTEVENT_CHAIN_MASK);
+ if (ret < 0)
+ goto out;
+
+ ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_2_SRC,
+ NOCP_CNT_SRC_INTEVENT_MASK,
+ NOCP_CNT_SRC_INTEVENT_CYCLE_MASK);
+ if (ret < 0)
+ goto out;
+
+ ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_3_SRC,
+ NOCP_CNT_SRC_INTEVENT_MASK,
+ NOCP_CNT_SRC_INTEVENT_CHAIN_MASK);
+ if (ret < 0)
+ goto out;
+
+
+ /* Set an alarm with a max/min value of 0 to generate StatALARM */
+ ret = regmap_write(nocp->regmap, NOCP_STAT_ALARM_MIN, 0x0);
+ if (ret < 0)
+ goto out;
+
+ ret = regmap_write(nocp->regmap, NOCP_STAT_ALARM_MAX, 0x0);
+ if (ret < 0)
+ goto out;
+
+ /* Set AlarmMode */
+ ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_0_ALARM_MODE,
+ NOCP_CNT_ALARM_MODE_MASK,
+ NOCP_CNT_ALARM_MODE_MIN_MAX_MASK);
+ if (ret < 0)
+ goto out;
+
+ ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_1_ALARM_MODE,
+ NOCP_CNT_ALARM_MODE_MASK,
+ NOCP_CNT_ALARM_MODE_MIN_MAX_MASK);
+ if (ret < 0)
+ goto out;
+
+ ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_2_ALARM_MODE,
+ NOCP_CNT_ALARM_MODE_MASK,
+ NOCP_CNT_ALARM_MODE_MIN_MAX_MASK);
+ if (ret < 0)
+ goto out;
+
+ ret = regmap_update_bits(nocp->regmap, NOCP_COUNTERS_3_ALARM_MODE,
+ NOCP_CNT_ALARM_MODE_MASK,
+ NOCP_CNT_ALARM_MODE_MIN_MAX_MASK);
+ if (ret < 0)
+ goto out;
+
+ /* Enable the measurements by setting AlarmEn and StatEn */
+ ret = regmap_update_bits(nocp->regmap, NOCP_MAIN_CTL,
+ NOCP_MAIN_CTL_STATEN_MASK | NOCP_MAIN_CTL_ALARMEN_MASK,
+ NOCP_MAIN_CTL_STATEN_MASK | NOCP_MAIN_CTL_ALARMEN_MASK);
+ if (ret < 0)
+ goto out;
+
+ /* Set GlobalEN */
+ ret = regmap_update_bits(nocp->regmap, NOCP_CFG_CTL,
+ NOCP_CFG_CTL_GLOBALEN_MASK,
+ NOCP_CFG_CTL_GLOBALEN_MASK);
+ if (ret < 0)
+ goto out;
+
+ /* Enable NoC probe */
+ ret = regmap_update_bits(nocp->regmap, NOCP_MAIN_CTL,
+ NOCP_MAIN_CTL_STATEN_MASK,
+ NOCP_MAIN_CTL_STATEN_MASK);
+ if (ret < 0)
+ goto out;
+
+ return 0;
+
+out:
+ /* Reset NoC probe */
+ if (regmap_update_bits(nocp->regmap, NOCP_MAIN_CTL,
+ NOCP_MAIN_CTL_STATEN_MASK, 0)) {
+ dev_err(nocp->dev, "Failed to reset NoC probe device\n");
+ }
+
+ return ret;
+}
+
+static int exynos_nocp_get_event(struct devfreq_event_dev *edev,
+ struct devfreq_event_data *edata)
+{
+ struct exynos_nocp *nocp = devfreq_event_get_drvdata(edev);
+ unsigned int counter[4];
+ int ret;
+
+ /* Read cycle count */
+ ret = regmap_read(nocp->regmap, NOCP_COUNTERS_0_VAL, &counter[0]);
+ if (ret < 0)
+ goto out;
+
+ ret = regmap_read(nocp->regmap, NOCP_COUNTERS_1_VAL, &counter[1]);
+ if (ret < 0)
+ goto out;
+
+ ret = regmap_read(nocp->regmap, NOCP_COUNTERS_2_VAL, &counter[2]);
+ if (ret < 0)
+ goto out;
+
+ ret = regmap_read(nocp->regmap, NOCP_COUNTERS_3_VAL, &counter[3]);
+ if (ret < 0)
+ goto out;
+
+ edata->load_count = ((counter[1] << 16) | counter[0]);
+ edata->total_count = ((counter[3] << 16) | counter[2]);
+
+ dev_dbg(&edev->dev, "%s (event: %ld/%ld)\n", edev->desc->name,
+ edata->load_count, edata->total_count);
+
+ return 0;
+
+out:
+ edata->load_count = 0;
+ edata->total_count = 0;
+
+ dev_err(nocp->dev, "Failed to read the counter of NoC probe device\n");
+
+ return ret;
+}
+
+static const struct devfreq_event_ops exynos_nocp_ops = {
+ .set_event = exynos_nocp_set_event,
+ .get_event = exynos_nocp_get_event,
+};
+
+static const struct of_device_id exynos_nocp_id_match[] = {
+ { .compatible = "samsung,exynos5420-nocp", },
+ { /* sentinel */ },
+};
+
+static struct regmap_config exynos_nocp_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = NOCP_COUNTERS_3_VAL,
+};
+
+static int exynos_nocp_parse_dt(struct platform_device *pdev,
+ struct exynos_nocp *nocp)
+{
+ struct device *dev = nocp->dev;
+ struct device_node *np = dev->of_node;
+ struct resource *res;
+ void __iomem *base;
+
+ if (!np) {
+ dev_err(dev, "failed to find devicetree node\n");
+ return -EINVAL;
+ }
+
+ nocp->clk = devm_clk_get(dev, "nocp");
+ if (IS_ERR(nocp->clk))
+ nocp->clk = NULL;
+
+ /* Maps the memory mapped IO to control nocp register */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (IS_ERR(res))
+ return PTR_ERR(res);
+
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ exynos_nocp_regmap_config.max_register = resource_size(res) - 4;
+
+ nocp->regmap = devm_regmap_init_mmio(dev, base,
+ &exynos_nocp_regmap_config);
+ if (IS_ERR(nocp->regmap)) {
+ dev_err(dev, "failed to initialize regmap\n");
+ return PTR_ERR(nocp->regmap);
+ }
+
+ return 0;
+}
+
+static int exynos_nocp_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct exynos_nocp *nocp;
+ int ret;
+
+ nocp = devm_kzalloc(&pdev->dev, sizeof(*nocp), GFP_KERNEL);
+ if (!nocp)
+ return -ENOMEM;
+
+ nocp->dev = &pdev->dev;
+
+ /* Parse dt data to get resource */
+ ret = exynos_nocp_parse_dt(pdev, nocp);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "failed to parse devicetree for resource\n");
+ return ret;
+ }
+
+ /* Add devfreq-event device to measure the bandwidth of NoC */
+ nocp->desc.ops = &exynos_nocp_ops;
+ nocp->desc.driver_data = nocp;
+ nocp->desc.name = np->full_name;
+ nocp->edev = devm_devfreq_event_add_edev(&pdev->dev, &nocp->desc);
+ if (IS_ERR(nocp->edev)) {
+ dev_err(&pdev->dev,
+ "failed to add devfreq-event device\n");
+ return PTR_ERR(nocp->edev);
+ }
+ platform_set_drvdata(pdev, nocp);
+
+ clk_prepare_enable(nocp->clk);
+
+ pr_info("exynos-nocp: new NoC Probe device registered: %s\n",
+ dev_name(dev));
+
+ return 0;
+}
+
+static int exynos_nocp_remove(struct platform_device *pdev)
+{
+ struct exynos_nocp *nocp = platform_get_drvdata(pdev);
+
+ clk_disable_unprepare(nocp->clk);
+
+ return 0;
+}
+
+static struct platform_driver exynos_nocp_driver = {
+ .probe = exynos_nocp_probe,
+ .remove = exynos_nocp_remove,
+ .driver = {
+ .name = "exynos-nocp",
+ .of_match_table = exynos_nocp_id_match,
+ },
+};
+module_platform_driver(exynos_nocp_driver);
+
+MODULE_DESCRIPTION("Exynos NoC (Network on Chip) Probe driver");
+MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * exynos-nocp.h - EXYNOS NoC (Network on Chip) Probe header file
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * Author : Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __EXYNOS_NOCP_H__
+#define __EXYNOS_NOCP_H__
+
+enum nocp_reg {
+ NOCP_ID_REVISION_ID = 0x04,
+ NOCP_MAIN_CTL = 0x08,
+ NOCP_CFG_CTL = 0x0C,
+
+ NOCP_STAT_PERIOD = 0x24,
+ NOCP_STAT_GO = 0x28,
+ NOCP_STAT_ALARM_MIN = 0x2C,
+ NOCP_STAT_ALARM_MAX = 0x30,
+ NOCP_STAT_ALARM_STATUS = 0x34,
+ NOCP_STAT_ALARM_CLR = 0x38,
+
+ NOCP_COUNTERS_0_SRC = 0x138,
+ NOCP_COUNTERS_0_ALARM_MODE = 0x13C,
+ NOCP_COUNTERS_0_VAL = 0x140,
+
+ NOCP_COUNTERS_1_SRC = 0x14C,
+ NOCP_COUNTERS_1_ALARM_MODE = 0x150,
+ NOCP_COUNTERS_1_VAL = 0x154,
+
+ NOCP_COUNTERS_2_SRC = 0x160,
+ NOCP_COUNTERS_2_ALARM_MODE = 0x164,
+ NOCP_COUNTERS_2_VAL = 0x168,
+
+ NOCP_COUNTERS_3_SRC = 0x174,
+ NOCP_COUNTERS_3_ALARM_MODE = 0x178,
+ NOCP_COUNTERS_3_VAL = 0x17C,
+};
+
+/* NOCP_MAIN_CTL register */
+#define NOCP_MAIN_CTL_ERREN_MASK BIT(0)
+#define NOCP_MAIN_CTL_TRACEEN_MASK BIT(1)
+#define NOCP_MAIN_CTL_PAYLOADEN_MASK BIT(2)
+#define NOCP_MAIN_CTL_STATEN_MASK BIT(3)
+#define NOCP_MAIN_CTL_ALARMEN_MASK BIT(4)
+#define NOCP_MAIN_CTL_STATCONDDUMP_MASK BIT(5)
+#define NOCP_MAIN_CTL_INTRUSIVEMODE_MASK BIT(6)
+
+/* NOCP_CFG_CTL register */
+#define NOCP_CFG_CTL_GLOBALEN_MASK BIT(0)
+#define NOCP_CFG_CTL_ACTIVE_MASK BIT(1)
+
+/* NOCP_COUNTERS_x_SRC register */
+#define NOCP_CNT_SRC_INTEVENT_SHIFT 0
+#define NOCP_CNT_SRC_INTEVENT_MASK (0x1F << NOCP_CNT_SRC_INTEVENT_SHIFT)
+#define NOCP_CNT_SRC_INTEVENT_OFF_MASK (0x0 << NOCP_CNT_SRC_INTEVENT_SHIFT)
+#define NOCP_CNT_SRC_INTEVENT_CYCLE_MASK (0x1 << NOCP_CNT_SRC_INTEVENT_SHIFT)
+#define NOCP_CNT_SRC_INTEVENT_IDLE_MASK (0x2 << NOCP_CNT_SRC_INTEVENT_SHIFT)
+#define NOCP_CNT_SRC_INTEVENT_XFER_MASK (0x3 << NOCP_CNT_SRC_INTEVENT_SHIFT)
+#define NOCP_CNT_SRC_INTEVENT_BUSY_MASK (0x4 << NOCP_CNT_SRC_INTEVENT_SHIFT)
+#define NOCP_CNT_SRC_INTEVENT_WAIT_MASK (0x5 << NOCP_CNT_SRC_INTEVENT_SHIFT)
+#define NOCP_CNT_SRC_INTEVENT_PKT_MASK (0x6 << NOCP_CNT_SRC_INTEVENT_SHIFT)
+#define NOCP_CNT_SRC_INTEVENT_BYTE_MASK (0x8 << NOCP_CNT_SRC_INTEVENT_SHIFT)
+#define NOCP_CNT_SRC_INTEVENT_CHAIN_MASK (0x10 << NOCP_CNT_SRC_INTEVENT_SHIFT)
+
+/* NOCP_COUNTERS_x_ALARM_MODE register */
+#define NOCP_CNT_ALARM_MODE_SHIFT 0
+#define NOCP_CNT_ALARM_MODE_MASK (0x3 << NOCP_CNT_ALARM_MODE_SHIFT)
+#define NOCP_CNT_ALARM_MODE_OFF_MASK (0x0 << NOCP_CNT_ALARM_MODE_SHIFT)
+#define NOCP_CNT_ALARM_MODE_MIN_MASK (0x1 << NOCP_CNT_ALARM_MODE_SHIFT)
+#define NOCP_CNT_ALARM_MODE_MAX_MASK (0x2 << NOCP_CNT_ALARM_MODE_SHIFT)
+#define NOCP_CNT_ALARM_MODE_MIN_MAX_MASK (0x3 << NOCP_CNT_ALARM_MODE_SHIFT)
+
+#endif /* __EXYNOS_NOCP_H__ */
--- /dev/null
+/*
+ * Generic Exynos Bus frequency driver with DEVFREQ Framework
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ * Author : Chanwoo Choi <cw00.choi@samsung.com>
+ *
+ * This driver support Exynos Bus frequency feature by using
+ * DEVFREQ framework and is based on drivers/devfreq/exynos/exynos4_bus.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/devfreq.h>
+#include <linux/devfreq-event.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pm_opp.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#define DEFAULT_SATURATION_RATIO 40
+#define DEFAULT_VOLTAGE_TOLERANCE 2
+
+struct exynos_bus {
+ struct device *dev;
+
+ struct devfreq *devfreq;
+ struct devfreq_event_dev **edev;
+ unsigned int edev_count;
+ struct mutex lock;
+
+ struct dev_pm_opp *curr_opp;
+
+ struct regulator *regulator;
+ struct clk *clk;
+ unsigned int voltage_tolerance;
+ unsigned int ratio;
+};
+
+/*
+ * Control the devfreq-event device to get the current state of bus
+ */
+#define exynos_bus_ops_edev(ops) \
+static int exynos_bus_##ops(struct exynos_bus *bus) \
+{ \
+ int i, ret; \
+ \
+ for (i = 0; i < bus->edev_count; i++) { \
+ if (!bus->edev[i]) \
+ continue; \
+ ret = devfreq_event_##ops(bus->edev[i]); \
+ if (ret < 0) \
+ return ret; \
+ } \
+ \
+ return 0; \
+}
+exynos_bus_ops_edev(enable_edev);
+exynos_bus_ops_edev(disable_edev);
+exynos_bus_ops_edev(set_event);
+
+static int exynos_bus_get_event(struct exynos_bus *bus,
+ struct devfreq_event_data *edata)
+{
+ struct devfreq_event_data event_data;
+ unsigned long load_count = 0, total_count = 0;
+ int i, ret = 0;
+
+ for (i = 0; i < bus->edev_count; i++) {
+ if (!bus->edev[i])
+ continue;
+
+ ret = devfreq_event_get_event(bus->edev[i], &event_data);
+ if (ret < 0)
+ return ret;
+
+ if (i == 0 || event_data.load_count > load_count) {
+ load_count = event_data.load_count;
+ total_count = event_data.total_count;
+ }
+ }
+
+ edata->load_count = load_count;
+ edata->total_count = total_count;
+
+ return ret;
+}
+
+/*
+ * Must necessary function for devfreq simple-ondemand governor
+ */
+static int exynos_bus_target(struct device *dev, unsigned long *freq, u32 flags)
+{
+ struct exynos_bus *bus = dev_get_drvdata(dev);
+ struct dev_pm_opp *new_opp;
+ unsigned long old_freq, new_freq, old_volt, new_volt, tol;
+ int ret = 0;
+
+ /* Get new opp-bus instance according to new bus clock */
+ rcu_read_lock();
+ new_opp = devfreq_recommended_opp(dev, freq, flags);
+ if (IS_ERR(new_opp)) {
+ dev_err(dev, "failed to get recommended opp instance\n");
+ rcu_read_unlock();
+ return PTR_ERR(new_opp);
+ }
+
+ new_freq = dev_pm_opp_get_freq(new_opp);
+ new_volt = dev_pm_opp_get_voltage(new_opp);
+ old_freq = dev_pm_opp_get_freq(bus->curr_opp);
+ old_volt = dev_pm_opp_get_voltage(bus->curr_opp);
+ rcu_read_unlock();
+
+ if (old_freq == new_freq)
+ return 0;
+ tol = new_volt * bus->voltage_tolerance / 100;
+
+ /* Change voltage and frequency according to new OPP level */
+ mutex_lock(&bus->lock);
+
+ if (old_freq < new_freq) {
+ ret = regulator_set_voltage_tol(bus->regulator, new_volt, tol);
+ if (ret < 0) {
+ dev_err(bus->dev, "failed to set voltage\n");
+ goto out;
+ }
+ }
+
+ ret = clk_set_rate(bus->clk, new_freq);
+ if (ret < 0) {
+ dev_err(dev, "failed to change clock of bus\n");
+ clk_set_rate(bus->clk, old_freq);
+ goto out;
+ }
+
+ if (old_freq > new_freq) {
+ ret = regulator_set_voltage_tol(bus->regulator, new_volt, tol);
+ if (ret < 0) {
+ dev_err(bus->dev, "failed to set voltage\n");
+ goto out;
+ }
+ }
+ bus->curr_opp = new_opp;
+
+ dev_dbg(dev, "Set the frequency of bus (%lukHz -> %lukHz)\n",
+ old_freq/1000, new_freq/1000);
+out:
+ mutex_unlock(&bus->lock);
+
+ return ret;
+}
+
+static int exynos_bus_get_dev_status(struct device *dev,
+ struct devfreq_dev_status *stat)
+{
+ struct exynos_bus *bus = dev_get_drvdata(dev);
+ struct devfreq_event_data edata;
+ int ret;
+
+ rcu_read_lock();
+ stat->current_frequency = dev_pm_opp_get_freq(bus->curr_opp);
+ rcu_read_unlock();
+
+ ret = exynos_bus_get_event(bus, &edata);
+ if (ret < 0) {
+ stat->total_time = stat->busy_time = 0;
+ goto err;
+ }
+
+ stat->busy_time = (edata.load_count * 100) / bus->ratio;
+ stat->total_time = edata.total_count;
+
+ dev_dbg(dev, "Usage of devfreq-event : %lu/%lu\n", stat->busy_time,
+ stat->total_time);
+
+err:
+ ret = exynos_bus_set_event(bus);
+ if (ret < 0) {
+ dev_err(dev, "failed to set event to devfreq-event devices\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+static void exynos_bus_exit(struct device *dev)
+{
+ struct exynos_bus *bus = dev_get_drvdata(dev);
+ int ret;
+
+ ret = exynos_bus_disable_edev(bus);
+ if (ret < 0)
+ dev_warn(dev, "failed to disable the devfreq-event devices\n");
+
+ if (bus->regulator)
+ regulator_disable(bus->regulator);
+
+ dev_pm_opp_of_remove_table(dev);
+ clk_disable_unprepare(bus->clk);
+}
+
+/*
+ * Must necessary function for devfreq passive governor
+ */
+static int exynos_bus_passive_target(struct device *dev, unsigned long *freq,
+ u32 flags)
+{
+ struct exynos_bus *bus = dev_get_drvdata(dev);
+ struct dev_pm_opp *new_opp;
+ unsigned long old_freq, new_freq;
+ int ret = 0;
+
+ /* Get new opp-bus instance according to new bus clock */
+ rcu_read_lock();
+ new_opp = devfreq_recommended_opp(dev, freq, flags);
+ if (IS_ERR(new_opp)) {
+ dev_err(dev, "failed to get recommended opp instance\n");
+ rcu_read_unlock();
+ return PTR_ERR(new_opp);
+ }
+
+ new_freq = dev_pm_opp_get_freq(new_opp);
+ old_freq = dev_pm_opp_get_freq(bus->curr_opp);
+ rcu_read_unlock();
+
+ if (old_freq == new_freq)
+ return 0;
+
+ /* Change the frequency according to new OPP level */
+ mutex_lock(&bus->lock);
+
+ ret = clk_set_rate(bus->clk, new_freq);
+ if (ret < 0) {
+ dev_err(dev, "failed to set the clock of bus\n");
+ goto out;
+ }
+
+ *freq = new_freq;
+ bus->curr_opp = new_opp;
+
+ dev_dbg(dev, "Set the frequency of bus (%lukHz -> %lukHz)\n",
+ old_freq/1000, new_freq/1000);
+out:
+ mutex_unlock(&bus->lock);
+
+ return ret;
+}
+
+static void exynos_bus_passive_exit(struct device *dev)
+{
+ struct exynos_bus *bus = dev_get_drvdata(dev);
+
+ dev_pm_opp_of_remove_table(dev);
+ clk_disable_unprepare(bus->clk);
+}
+
+static int exynos_bus_parent_parse_of(struct device_node *np,
+ struct exynos_bus *bus)
+{
+ struct device *dev = bus->dev;
+ int i, ret, count, size;
+
+ /* Get the regulator to provide each bus with the power */
+ bus->regulator = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(bus->regulator)) {
+ dev_err(dev, "failed to get VDD regulator\n");
+ return PTR_ERR(bus->regulator);
+ }
+
+ ret = regulator_enable(bus->regulator);
+ if (ret < 0) {
+ dev_err(dev, "failed to enable VDD regulator\n");
+ return ret;
+ }
+
+ /*
+ * Get the devfreq-event devices to get the current utilization of
+ * buses. This raw data will be used in devfreq ondemand governor.
+ */
+ count = devfreq_event_get_edev_count(dev);
+ if (count < 0) {
+ dev_err(dev, "failed to get the count of devfreq-event dev\n");
+ ret = count;
+ goto err_regulator;
+ }
+ bus->edev_count = count;
+
+ size = sizeof(*bus->edev) * count;
+ bus->edev = devm_kzalloc(dev, size, GFP_KERNEL);
+ if (!bus->edev) {
+ ret = -ENOMEM;
+ goto err_regulator;
+ }
+
+ for (i = 0; i < count; i++) {
+ bus->edev[i] = devfreq_event_get_edev_by_phandle(dev, i);
+ if (IS_ERR(bus->edev[i])) {
+ ret = -EPROBE_DEFER;
+ goto err_regulator;
+ }
+ }
+
+ /*
+ * Optionally, Get the saturation ratio according to Exynos SoC
+ * When measuring the utilization of each AXI bus with devfreq-event
+ * devices, the measured real cycle might be much lower than the
+ * total cycle of bus during sampling rate. In result, the devfreq
+ * simple-ondemand governor might not decide to change the current
+ * frequency due to too utilization (= real cycle/total cycle).
+ * So, this property is used to adjust the utilization when calculating
+ * the busy_time in exynos_bus_get_dev_status().
+ */
+ if (of_property_read_u32(np, "exynos,saturation-ratio", &bus->ratio))
+ bus->ratio = DEFAULT_SATURATION_RATIO;
+
+ if (of_property_read_u32(np, "exynos,voltage-tolerance",
+ &bus->voltage_tolerance))
+ bus->voltage_tolerance = DEFAULT_VOLTAGE_TOLERANCE;
+
+ return 0;
+
+err_regulator:
+ regulator_disable(bus->regulator);
+
+ return ret;
+}
+
+static int exynos_bus_parse_of(struct device_node *np,
+ struct exynos_bus *bus)
+{
+ struct device *dev = bus->dev;
+ unsigned long rate;
+ int ret;
+
+ /* Get the clock to provide each bus with source clock */
+ bus->clk = devm_clk_get(dev, "bus");
+ if (IS_ERR(bus->clk)) {
+ dev_err(dev, "failed to get bus clock\n");
+ return PTR_ERR(bus->clk);
+ }
+
+ ret = clk_prepare_enable(bus->clk);
+ if (ret < 0) {
+ dev_err(dev, "failed to get enable clock\n");
+ return ret;
+ }
+
+ /* Get the freq and voltage from OPP table to scale the bus freq */
+ rcu_read_lock();
+ ret = dev_pm_opp_of_add_table(dev);
+ if (ret < 0) {
+ dev_err(dev, "failed to get OPP table\n");
+ rcu_read_unlock();
+ goto err_clk;
+ }
+
+ rate = clk_get_rate(bus->clk);
+ bus->curr_opp = devfreq_recommended_opp(dev, &rate, 0);
+ if (IS_ERR(bus->curr_opp)) {
+ dev_err(dev, "failed to find dev_pm_opp\n");
+ rcu_read_unlock();
+ ret = PTR_ERR(bus->curr_opp);
+ goto err_opp;
+ }
+ rcu_read_unlock();
+
+ return 0;
+
+err_opp:
+ dev_pm_opp_of_remove_table(dev);
+err_clk:
+ clk_disable_unprepare(bus->clk);
+
+ return ret;
+}
+
+static int exynos_bus_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct devfreq_dev_profile *profile;
+ struct devfreq_simple_ondemand_data *ondemand_data;
+ struct devfreq_passive_data *passive_data;
+ struct devfreq *parent_devfreq;
+ struct exynos_bus *bus;
+ int ret, max_state;
+ unsigned long min_freq, max_freq;
+
+ if (!np) {
+ dev_err(dev, "failed to find devicetree node\n");
+ return -EINVAL;
+ }
+
+ bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
+ if (!bus)
+ return -ENOMEM;
+ mutex_init(&bus->lock);
+ bus->dev = &pdev->dev;
+ platform_set_drvdata(pdev, bus);
+
+ /* Parse the device-tree to get the resource information */
+ ret = exynos_bus_parse_of(np, bus);
+ if (ret < 0)
+ goto err;
+
+ profile = devm_kzalloc(dev, sizeof(*profile), GFP_KERNEL);
+ if (!profile) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ if (of_parse_phandle(dev->of_node, "devfreq", 0))
+ goto passive;
+ else
+ ret = exynos_bus_parent_parse_of(np, bus);
+
+ if (ret < 0)
+ goto err;
+
+ /* Initialize the struct profile and governor data for parent device */
+ profile->polling_ms = 50;
+ profile->target = exynos_bus_target;
+ profile->get_dev_status = exynos_bus_get_dev_status;
+ profile->exit = exynos_bus_exit;
+
+ ondemand_data = devm_kzalloc(dev, sizeof(*ondemand_data), GFP_KERNEL);
+ if (!ondemand_data) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ ondemand_data->upthreshold = 40;
+ ondemand_data->downdifferential = 5;
+
+ /* Add devfreq device to monitor and handle the exynos bus */
+ bus->devfreq = devm_devfreq_add_device(dev, profile, "simple_ondemand",
+ ondemand_data);
+ if (IS_ERR(bus->devfreq)) {
+ dev_err(dev, "failed to add devfreq device\n");
+ ret = PTR_ERR(bus->devfreq);
+ goto err;
+ }
+
+ /* Register opp_notifier to catch the change of OPP */
+ ret = devm_devfreq_register_opp_notifier(dev, bus->devfreq);
+ if (ret < 0) {
+ dev_err(dev, "failed to register opp notifier\n");
+ goto err;
+ }
+
+ /*
+ * Enable devfreq-event to get raw data which is used to determine
+ * current bus load.
+ */
+ ret = exynos_bus_enable_edev(bus);
+ if (ret < 0) {
+ dev_err(dev, "failed to enable devfreq-event devices\n");
+ goto err;
+ }
+
+ ret = exynos_bus_set_event(bus);
+ if (ret < 0) {
+ dev_err(dev, "failed to set event to devfreq-event devices\n");
+ goto err;
+ }
+
+ goto out;
+passive:
+ /* Initialize the struct profile and governor data for passive device */
+ profile->target = exynos_bus_passive_target;
+ profile->exit = exynos_bus_passive_exit;
+
+ /* Get the instance of parent devfreq device */
+ parent_devfreq = devfreq_get_devfreq_by_phandle(dev, 0);
+ if (IS_ERR(parent_devfreq)) {
+ ret = -EPROBE_DEFER;
+ goto err;
+ }
+
+ passive_data = devm_kzalloc(dev, sizeof(*passive_data), GFP_KERNEL);
+ if (!passive_data) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ passive_data->parent = parent_devfreq;
+
+ /* Add devfreq device for exynos bus with passive governor */
+ bus->devfreq = devm_devfreq_add_device(dev, profile, "passive",
+ passive_data);
+ if (IS_ERR(bus->devfreq)) {
+ dev_err(dev,
+ "failed to add devfreq dev with passive governor\n");
+ ret = -EPROBE_DEFER;
+ goto err;
+ }
+
+out:
+ max_state = bus->devfreq->profile->max_state;
+ min_freq = (bus->devfreq->profile->freq_table[0] / 1000);
+ max_freq = (bus->devfreq->profile->freq_table[max_state - 1] / 1000);
+ pr_info("exynos-bus: new bus device registered: %s (%6ld KHz ~ %6ld KHz)\n",
+ dev_name(dev), min_freq, max_freq);
+
+ return 0;
+
+err:
+ dev_pm_opp_of_remove_table(dev);
+ clk_disable_unprepare(bus->clk);
+
+ return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos_bus_resume(struct device *dev)
+{
+ struct exynos_bus *bus = dev_get_drvdata(dev);
+ int ret;
+
+ ret = exynos_bus_enable_edev(bus);
+ if (ret < 0) {
+ dev_err(dev, "failed to enable the devfreq-event devices\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int exynos_bus_suspend(struct device *dev)
+{
+ struct exynos_bus *bus = dev_get_drvdata(dev);
+ int ret;
+
+ ret = exynos_bus_disable_edev(bus);
+ if (ret < 0) {
+ dev_err(dev, "failed to disable the devfreq-event devices\n");
+ return ret;
+ }
+
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops exynos_bus_pm = {
+ SET_SYSTEM_SLEEP_PM_OPS(exynos_bus_suspend, exynos_bus_resume)
+};
+
+static const struct of_device_id exynos_bus_of_match[] = {
+ { .compatible = "samsung,exynos-bus", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, exynos_bus_of_match);
+
+static struct platform_driver exynos_bus_platdrv = {
+ .probe = exynos_bus_probe,
+ .driver = {
+ .name = "exynos-bus",
+ .pm = &exynos_bus_pm,
+ .of_match_table = of_match_ptr(exynos_bus_of_match),
+ },
+};
+module_platform_driver(exynos_bus_platdrv);
+
+MODULE_DESCRIPTION("Generic Exynos Bus frequency driver");
+MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
+MODULE_LICENSE("GPL v2");
+++ /dev/null
-# Exynos DEVFREQ Drivers
-obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ) += exynos_ppmu.o exynos4_bus.o
-obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ) += exynos_ppmu.o exynos5_bus.o
+++ /dev/null
-/* drivers/devfreq/exynos4210_memorybus.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- * MyungJoo Ham <myungjoo.ham@samsung.com>
- *
- * EXYNOS4 - Memory/Bus clock frequency scaling support in DEVFREQ framework
- * This version supports EXYNOS4210 only. This changes bus frequencies
- * and vddint voltages. Exynos4412/4212 should be able to be supported
- * with minor modifications.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-#include <linux/suspend.h>
-#include <linux/pm_opp.h>
-#include <linux/devfreq.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/consumer.h>
-#include <linux/module.h>
-
-#include <mach/map.h>
-
-#include "exynos_ppmu.h"
-#include "exynos4_bus.h"
-
-#define MAX_SAFEVOLT 1200000 /* 1.2V */
-
-enum exynos4_busf_type {
- TYPE_BUSF_EXYNOS4210,
- TYPE_BUSF_EXYNOS4x12,
-};
-
-/* Assume that the bus is saturated if the utilization is 40% */
-#define BUS_SATURATION_RATIO 40
-
-enum busclk_level_idx {
- LV_0 = 0,
- LV_1,
- LV_2,
- LV_3,
- LV_4,
- _LV_END
-};
-
-enum exynos_ppmu_idx {
- PPMU_DMC0,
- PPMU_DMC1,
- PPMU_END,
-};
-
-#define EX4210_LV_MAX LV_2
-#define EX4x12_LV_MAX LV_4
-#define EX4210_LV_NUM (LV_2 + 1)
-#define EX4x12_LV_NUM (LV_4 + 1)
-
-/**
- * struct busfreq_opp_info - opp information for bus
- * @rate: Frequency in hertz
- * @volt: Voltage in microvolts corresponding to this OPP
- */
-struct busfreq_opp_info {
- unsigned long rate;
- unsigned long volt;
-};
-
-struct busfreq_data {
- enum exynos4_busf_type type;
- struct device *dev;
- struct devfreq *devfreq;
- bool disabled;
- struct regulator *vdd_int;
- struct regulator *vdd_mif; /* Exynos4412/4212 only */
- struct busfreq_opp_info curr_oppinfo;
- struct busfreq_ppmu_data ppmu_data;
-
- struct notifier_block pm_notifier;
- struct mutex lock;
-
- /* Dividers calculated at boot/probe-time */
- unsigned int dmc_divtable[_LV_END]; /* DMC0 */
- unsigned int top_divtable[_LV_END];
-};
-
-/* 4210 controls clock of mif and voltage of int */
-static struct bus_opp_table exynos4210_busclk_table[] = {
- {LV_0, 400000, 1150000},
- {LV_1, 267000, 1050000},
- {LV_2, 133000, 1025000},
- {0, 0, 0},
-};
-
-/*
- * MIF is the main control knob clock for Exynos4x12 MIF/INT
- * clock and voltage of both mif/int are controlled.
- */
-static struct bus_opp_table exynos4x12_mifclk_table[] = {
- {LV_0, 400000, 1100000},
- {LV_1, 267000, 1000000},
- {LV_2, 160000, 950000},
- {LV_3, 133000, 950000},
- {LV_4, 100000, 950000},
- {0, 0, 0},
-};
-
-/*
- * INT is not the control knob of 4x12. LV_x is not meant to represent
- * the current performance. (MIF does)
- */
-static struct bus_opp_table exynos4x12_intclk_table[] = {
- {LV_0, 200000, 1000000},
- {LV_1, 160000, 950000},
- {LV_2, 133000, 925000},
- {LV_3, 100000, 900000},
- {0, 0, 0},
-};
-
-/* TODO: asv volt definitions are "__initdata"? */
-/* Some chips have different operating voltages */
-static unsigned int exynos4210_asv_volt[][EX4210_LV_NUM] = {
- {1150000, 1050000, 1050000},
- {1125000, 1025000, 1025000},
- {1100000, 1000000, 1000000},
- {1075000, 975000, 975000},
- {1050000, 950000, 950000},
-};
-
-static unsigned int exynos4x12_mif_step_50[][EX4x12_LV_NUM] = {
- /* 400 267 160 133 100 */
- {1050000, 950000, 900000, 900000, 900000}, /* ASV0 */
- {1050000, 950000, 900000, 900000, 900000}, /* ASV1 */
- {1050000, 950000, 900000, 900000, 900000}, /* ASV2 */
- {1050000, 900000, 900000, 900000, 900000}, /* ASV3 */
- {1050000, 900000, 900000, 900000, 850000}, /* ASV4 */
- {1050000, 900000, 900000, 850000, 850000}, /* ASV5 */
- {1050000, 900000, 850000, 850000, 850000}, /* ASV6 */
- {1050000, 900000, 850000, 850000, 850000}, /* ASV7 */
- {1050000, 900000, 850000, 850000, 850000}, /* ASV8 */
-};
-
-static unsigned int exynos4x12_int_volt[][EX4x12_LV_NUM] = {
- /* 200 160 133 100 */
- {1000000, 950000, 925000, 900000}, /* ASV0 */
- {975000, 925000, 925000, 900000}, /* ASV1 */
- {950000, 925000, 900000, 875000}, /* ASV2 */
- {950000, 900000, 900000, 875000}, /* ASV3 */
- {925000, 875000, 875000, 875000}, /* ASV4 */
- {900000, 850000, 850000, 850000}, /* ASV5 */
- {900000, 850000, 850000, 850000}, /* ASV6 */
- {900000, 850000, 850000, 850000}, /* ASV7 */
- {900000, 850000, 850000, 850000}, /* ASV8 */
-};
-
-/*** Clock Divider Data for Exynos4210 ***/
-static unsigned int exynos4210_clkdiv_dmc0[][8] = {
- /*
- * Clock divider value for following
- * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD
- * DIVDMCP, DIVCOPY2, DIVCORE_TIMERS }
- */
-
- /* DMC L0: 400MHz */
- { 3, 1, 1, 1, 1, 1, 3, 1 },
- /* DMC L1: 266.7MHz */
- { 4, 1, 1, 2, 1, 1, 3, 1 },
- /* DMC L2: 133MHz */
- { 5, 1, 1, 5, 1, 1, 3, 1 },
-};
-static unsigned int exynos4210_clkdiv_top[][5] = {
- /*
- * Clock divider value for following
- * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND }
- */
- /* ACLK200 L0: 200MHz */
- { 3, 7, 4, 5, 1 },
- /* ACLK200 L1: 160MHz */
- { 4, 7, 5, 6, 1 },
- /* ACLK200 L2: 133MHz */
- { 5, 7, 7, 7, 1 },
-};
-static unsigned int exynos4210_clkdiv_lr_bus[][2] = {
- /*
- * Clock divider value for following
- * { DIVGDL/R, DIVGPL/R }
- */
- /* ACLK_GDL/R L1: 200MHz */
- { 3, 1 },
- /* ACLK_GDL/R L2: 160MHz */
- { 4, 1 },
- /* ACLK_GDL/R L3: 133MHz */
- { 5, 1 },
-};
-
-/*** Clock Divider Data for Exynos4212/4412 ***/
-static unsigned int exynos4x12_clkdiv_dmc0[][6] = {
- /*
- * Clock divider value for following
- * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD
- * DIVDMCP}
- */
-
- /* DMC L0: 400MHz */
- {3, 1, 1, 1, 1, 1},
- /* DMC L1: 266.7MHz */
- {4, 1, 1, 2, 1, 1},
- /* DMC L2: 160MHz */
- {5, 1, 1, 4, 1, 1},
- /* DMC L3: 133MHz */
- {5, 1, 1, 5, 1, 1},
- /* DMC L4: 100MHz */
- {7, 1, 1, 7, 1, 1},
-};
-static unsigned int exynos4x12_clkdiv_dmc1[][6] = {
- /*
- * Clock divider value for following
- * { G2DACP, DIVC2C, DIVC2C_ACLK }
- */
-
- /* DMC L0: 400MHz */
- {3, 1, 1},
- /* DMC L1: 266.7MHz */
- {4, 2, 1},
- /* DMC L2: 160MHz */
- {5, 4, 1},
- /* DMC L3: 133MHz */
- {5, 5, 1},
- /* DMC L4: 100MHz */
- {7, 7, 1},
-};
-static unsigned int exynos4x12_clkdiv_top[][5] = {
- /*
- * Clock divider value for following
- * { DIVACLK266_GPS, DIVACLK100, DIVACLK160,
- DIVACLK133, DIVONENAND }
- */
-
- /* ACLK_GDL/R L0: 200MHz */
- {2, 7, 4, 5, 1},
- /* ACLK_GDL/R L1: 200MHz */
- {2, 7, 4, 5, 1},
- /* ACLK_GDL/R L2: 160MHz */
- {4, 7, 5, 7, 1},
- /* ACLK_GDL/R L3: 133MHz */
- {4, 7, 5, 7, 1},
- /* ACLK_GDL/R L4: 100MHz */
- {7, 7, 7, 7, 1},
-};
-static unsigned int exynos4x12_clkdiv_lr_bus[][2] = {
- /*
- * Clock divider value for following
- * { DIVGDL/R, DIVGPL/R }
- */
-
- /* ACLK_GDL/R L0: 200MHz */
- {3, 1},
- /* ACLK_GDL/R L1: 200MHz */
- {3, 1},
- /* ACLK_GDL/R L2: 160MHz */
- {4, 1},
- /* ACLK_GDL/R L3: 133MHz */
- {5, 1},
- /* ACLK_GDL/R L4: 100MHz */
- {7, 1},
-};
-static unsigned int exynos4x12_clkdiv_sclkip[][3] = {
- /*
- * Clock divider value for following
- * { DIVMFC, DIVJPEG, DIVFIMC0~3}
- */
-
- /* SCLK_MFC: 200MHz */
- {3, 3, 4},
- /* SCLK_MFC: 200MHz */
- {3, 3, 4},
- /* SCLK_MFC: 160MHz */
- {4, 4, 5},
- /* SCLK_MFC: 133MHz */
- {5, 5, 5},
- /* SCLK_MFC: 100MHz */
- {7, 7, 7},
-};
-
-
-static int exynos4210_set_busclk(struct busfreq_data *data,
- struct busfreq_opp_info *oppi)
-{
- unsigned int index;
- unsigned int tmp;
-
- for (index = LV_0; index < EX4210_LV_NUM; index++)
- if (oppi->rate == exynos4210_busclk_table[index].clk)
- break;
-
- if (index == EX4210_LV_NUM)
- return -EINVAL;
-
- /* Change Divider - DMC0 */
- tmp = data->dmc_divtable[index];
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_DMC0);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0);
- } while (tmp & 0x11111111);
-
- /* Change Divider - TOP */
- tmp = data->top_divtable[index];
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_TOP);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP);
- } while (tmp & 0x11111);
-
- /* Change Divider - LEFTBUS */
- tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS);
-
- tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
-
- tmp |= ((exynos4210_clkdiv_lr_bus[index][0] <<
- EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
- (exynos4210_clkdiv_lr_bus[index][1] <<
- EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS);
- } while (tmp & 0x11);
-
- /* Change Divider - RIGHTBUS */
- tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS);
-
- tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
-
- tmp |= ((exynos4210_clkdiv_lr_bus[index][0] <<
- EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
- (exynos4210_clkdiv_lr_bus[index][1] <<
- EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS);
- } while (tmp & 0x11);
-
- return 0;
-}
-
-static int exynos4x12_set_busclk(struct busfreq_data *data,
- struct busfreq_opp_info *oppi)
-{
- unsigned int index;
- unsigned int tmp;
-
- for (index = LV_0; index < EX4x12_LV_NUM; index++)
- if (oppi->rate == exynos4x12_mifclk_table[index].clk)
- break;
-
- if (index == EX4x12_LV_NUM)
- return -EINVAL;
-
- /* Change Divider - DMC0 */
- tmp = data->dmc_divtable[index];
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_DMC0);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0);
- } while (tmp & 0x11111111);
-
- /* Change Divider - DMC1 */
- tmp = __raw_readl(EXYNOS4_CLKDIV_DMC1);
-
- tmp &= ~(EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK |
- EXYNOS4_CLKDIV_DMC1_C2C_MASK |
- EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK);
-
- tmp |= ((exynos4x12_clkdiv_dmc1[index][0] <<
- EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT) |
- (exynos4x12_clkdiv_dmc1[index][1] <<
- EXYNOS4_CLKDIV_DMC1_C2C_SHIFT) |
- (exynos4x12_clkdiv_dmc1[index][2] <<
- EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT));
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_DMC1);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC1);
- } while (tmp & 0x111111);
-
- /* Change Divider - TOP */
- tmp = __raw_readl(EXYNOS4_CLKDIV_TOP);
-
- tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK |
- EXYNOS4_CLKDIV_TOP_ACLK100_MASK |
- EXYNOS4_CLKDIV_TOP_ACLK160_MASK |
- EXYNOS4_CLKDIV_TOP_ACLK133_MASK |
- EXYNOS4_CLKDIV_TOP_ONENAND_MASK);
-
- tmp |= ((exynos4x12_clkdiv_top[index][0] <<
- EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT) |
- (exynos4x12_clkdiv_top[index][1] <<
- EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) |
- (exynos4x12_clkdiv_top[index][2] <<
- EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) |
- (exynos4x12_clkdiv_top[index][3] <<
- EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) |
- (exynos4x12_clkdiv_top[index][4] <<
- EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT));
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_TOP);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP);
- } while (tmp & 0x11111);
-
- /* Change Divider - LEFTBUS */
- tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS);
-
- tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
-
- tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] <<
- EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
- (exynos4x12_clkdiv_lr_bus[index][1] <<
- EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS);
- } while (tmp & 0x11);
-
- /* Change Divider - RIGHTBUS */
- tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS);
-
- tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
-
- tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] <<
- EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
- (exynos4x12_clkdiv_lr_bus[index][1] <<
- EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS);
- } while (tmp & 0x11);
-
- /* Change Divider - MFC */
- tmp = __raw_readl(EXYNOS4_CLKDIV_MFC);
-
- tmp &= ~(EXYNOS4_CLKDIV_MFC_MASK);
-
- tmp |= ((exynos4x12_clkdiv_sclkip[index][0] <<
- EXYNOS4_CLKDIV_MFC_SHIFT));
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_MFC);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_MFC);
- } while (tmp & 0x1);
-
- /* Change Divider - JPEG */
- tmp = __raw_readl(EXYNOS4_CLKDIV_CAM1);
-
- tmp &= ~(EXYNOS4_CLKDIV_CAM1_JPEG_MASK);
-
- tmp |= ((exynos4x12_clkdiv_sclkip[index][1] <<
- EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT));
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_CAM1);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1);
- } while (tmp & 0x1);
-
- /* Change Divider - FIMC0~3 */
- tmp = __raw_readl(EXYNOS4_CLKDIV_CAM);
-
- tmp &= ~(EXYNOS4_CLKDIV_CAM_FIMC0_MASK | EXYNOS4_CLKDIV_CAM_FIMC1_MASK |
- EXYNOS4_CLKDIV_CAM_FIMC2_MASK | EXYNOS4_CLKDIV_CAM_FIMC3_MASK);
-
- tmp |= ((exynos4x12_clkdiv_sclkip[index][2] <<
- EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT) |
- (exynos4x12_clkdiv_sclkip[index][2] <<
- EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT) |
- (exynos4x12_clkdiv_sclkip[index][2] <<
- EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT) |
- (exynos4x12_clkdiv_sclkip[index][2] <<
- EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT));
-
- __raw_writel(tmp, EXYNOS4_CLKDIV_CAM);
-
- do {
- tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1);
- } while (tmp & 0x1111);
-
- return 0;
-}
-
-static int exynos4x12_get_intspec(unsigned long mifclk)
-{
- int i = 0;
-
- while (exynos4x12_intclk_table[i].clk) {
- if (exynos4x12_intclk_table[i].clk <= mifclk)
- return i;
- i++;
- }
-
- return -EINVAL;
-}
-
-static int exynos4_bus_setvolt(struct busfreq_data *data,
- struct busfreq_opp_info *oppi,
- struct busfreq_opp_info *oldoppi)
-{
- int err = 0, tmp;
- unsigned long volt = oppi->volt;
-
- switch (data->type) {
- case TYPE_BUSF_EXYNOS4210:
- /* OPP represents DMC clock + INT voltage */
- err = regulator_set_voltage(data->vdd_int, volt,
- MAX_SAFEVOLT);
- break;
- case TYPE_BUSF_EXYNOS4x12:
- /* OPP represents MIF clock + MIF voltage */
- err = regulator_set_voltage(data->vdd_mif, volt,
- MAX_SAFEVOLT);
- if (err)
- break;
-
- tmp = exynos4x12_get_intspec(oppi->rate);
- if (tmp < 0) {
- err = tmp;
- regulator_set_voltage(data->vdd_mif,
- oldoppi->volt,
- MAX_SAFEVOLT);
- break;
- }
- err = regulator_set_voltage(data->vdd_int,
- exynos4x12_intclk_table[tmp].volt,
- MAX_SAFEVOLT);
- /* Try to recover */
- if (err)
- regulator_set_voltage(data->vdd_mif,
- oldoppi->volt,
- MAX_SAFEVOLT);
- break;
- default:
- err = -EINVAL;
- }
-
- return err;
-}
-
-static int exynos4_bus_target(struct device *dev, unsigned long *_freq,
- u32 flags)
-{
- int err = 0;
- struct platform_device *pdev = container_of(dev, struct platform_device,
- dev);
- struct busfreq_data *data = platform_get_drvdata(pdev);
- struct dev_pm_opp *opp;
- unsigned long freq;
- unsigned long old_freq = data->curr_oppinfo.rate;
- struct busfreq_opp_info new_oppinfo;
-
- rcu_read_lock();
- opp = devfreq_recommended_opp(dev, _freq, flags);
- if (IS_ERR(opp)) {
- rcu_read_unlock();
- return PTR_ERR(opp);
- }
- new_oppinfo.rate = dev_pm_opp_get_freq(opp);
- new_oppinfo.volt = dev_pm_opp_get_voltage(opp);
- rcu_read_unlock();
- freq = new_oppinfo.rate;
-
- if (old_freq == freq)
- return 0;
-
- dev_dbg(dev, "targeting %lukHz %luuV\n", freq, new_oppinfo.volt);
-
- mutex_lock(&data->lock);
-
- if (data->disabled)
- goto out;
-
- if (old_freq < freq)
- err = exynos4_bus_setvolt(data, &new_oppinfo,
- &data->curr_oppinfo);
- if (err)
- goto out;
-
- if (old_freq != freq) {
- switch (data->type) {
- case TYPE_BUSF_EXYNOS4210:
- err = exynos4210_set_busclk(data, &new_oppinfo);
- break;
- case TYPE_BUSF_EXYNOS4x12:
- err = exynos4x12_set_busclk(data, &new_oppinfo);
- break;
- default:
- err = -EINVAL;
- }
- }
- if (err)
- goto out;
-
- if (old_freq > freq)
- err = exynos4_bus_setvolt(data, &new_oppinfo,
- &data->curr_oppinfo);
- if (err)
- goto out;
-
- data->curr_oppinfo = new_oppinfo;
-out:
- mutex_unlock(&data->lock);
- return err;
-}
-
-static int exynos4_bus_get_dev_status(struct device *dev,
- struct devfreq_dev_status *stat)
-{
- struct busfreq_data *data = dev_get_drvdata(dev);
- struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data;
- int busier;
-
- exynos_read_ppmu(ppmu_data);
- busier = exynos_get_busier_ppmu(ppmu_data);
- stat->current_frequency = data->curr_oppinfo.rate;
-
- /* Number of cycles spent on memory access */
- stat->busy_time = ppmu_data->ppmu[busier].count[PPMU_PMNCNT3];
- stat->busy_time *= 100 / BUS_SATURATION_RATIO;
- stat->total_time = ppmu_data->ppmu[busier].ccnt;
-
- /* If the counters have overflown, retry */
- if (ppmu_data->ppmu[busier].ccnt_overflow ||
- ppmu_data->ppmu[busier].count_overflow[0])
- return -EAGAIN;
-
- return 0;
-}
-
-static struct devfreq_dev_profile exynos4_devfreq_profile = {
- .initial_freq = 400000,
- .polling_ms = 50,
- .target = exynos4_bus_target,
- .get_dev_status = exynos4_bus_get_dev_status,
-};
-
-static int exynos4210_init_tables(struct busfreq_data *data)
-{
- u32 tmp;
- int mgrp;
- int i, err = 0;
-
- tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0);
- for (i = LV_0; i < EX4210_LV_NUM; i++) {
- tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK |
- EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK |
- EXYNOS4_CLKDIV_DMC0_DPHY_MASK |
- EXYNOS4_CLKDIV_DMC0_DMC_MASK |
- EXYNOS4_CLKDIV_DMC0_DMCD_MASK |
- EXYNOS4_CLKDIV_DMC0_DMCP_MASK |
- EXYNOS4_CLKDIV_DMC0_COPY2_MASK |
- EXYNOS4_CLKDIV_DMC0_CORETI_MASK);
-
- tmp |= ((exynos4210_clkdiv_dmc0[i][0] <<
- EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) |
- (exynos4210_clkdiv_dmc0[i][1] <<
- EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) |
- (exynos4210_clkdiv_dmc0[i][2] <<
- EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) |
- (exynos4210_clkdiv_dmc0[i][3] <<
- EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) |
- (exynos4210_clkdiv_dmc0[i][4] <<
- EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) |
- (exynos4210_clkdiv_dmc0[i][5] <<
- EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT) |
- (exynos4210_clkdiv_dmc0[i][6] <<
- EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT) |
- (exynos4210_clkdiv_dmc0[i][7] <<
- EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT));
-
- data->dmc_divtable[i] = tmp;
- }
-
- tmp = __raw_readl(EXYNOS4_CLKDIV_TOP);
- for (i = LV_0; i < EX4210_LV_NUM; i++) {
- tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK200_MASK |
- EXYNOS4_CLKDIV_TOP_ACLK100_MASK |
- EXYNOS4_CLKDIV_TOP_ACLK160_MASK |
- EXYNOS4_CLKDIV_TOP_ACLK133_MASK |
- EXYNOS4_CLKDIV_TOP_ONENAND_MASK);
-
- tmp |= ((exynos4210_clkdiv_top[i][0] <<
- EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT) |
- (exynos4210_clkdiv_top[i][1] <<
- EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) |
- (exynos4210_clkdiv_top[i][2] <<
- EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) |
- (exynos4210_clkdiv_top[i][3] <<
- EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) |
- (exynos4210_clkdiv_top[i][4] <<
- EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT));
-
- data->top_divtable[i] = tmp;
- }
-
- /*
- * TODO: init tmp based on busfreq_data
- * (device-tree or platform-data)
- */
- tmp = 0; /* Max voltages for the reliability of the unknown */
-
- pr_debug("ASV Group of Exynos4 is %d\n", tmp);
- /* Use merged grouping for voltage */
- switch (tmp) {
- case 0:
- mgrp = 0;
- break;
- case 1:
- case 2:
- mgrp = 1;
- break;
- case 3:
- case 4:
- mgrp = 2;
- break;
- case 5:
- case 6:
- mgrp = 3;
- break;
- case 7:
- mgrp = 4;
- break;
- default:
- pr_warn("Unknown ASV Group. Use max voltage.\n");
- mgrp = 0;
- }
-
- for (i = LV_0; i < EX4210_LV_NUM; i++)
- exynos4210_busclk_table[i].volt = exynos4210_asv_volt[mgrp][i];
-
- for (i = LV_0; i < EX4210_LV_NUM; i++) {
- err = dev_pm_opp_add(data->dev, exynos4210_busclk_table[i].clk,
- exynos4210_busclk_table[i].volt);
- if (err) {
- dev_err(data->dev, "Cannot add opp entries.\n");
- return err;
- }
- }
-
-
- return 0;
-}
-
-static int exynos4x12_init_tables(struct busfreq_data *data)
-{
- unsigned int i;
- unsigned int tmp;
- int ret;
-
- /* Enable pause function for DREX2 DVFS */
- tmp = __raw_readl(EXYNOS4_DMC_PAUSE_CTRL);
- tmp |= EXYNOS4_DMC_PAUSE_ENABLE;
- __raw_writel(tmp, EXYNOS4_DMC_PAUSE_CTRL);
-
- tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0);
-
- for (i = 0; i < EX4x12_LV_NUM; i++) {
- tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK |
- EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK |
- EXYNOS4_CLKDIV_DMC0_DPHY_MASK |
- EXYNOS4_CLKDIV_DMC0_DMC_MASK |
- EXYNOS4_CLKDIV_DMC0_DMCD_MASK |
- EXYNOS4_CLKDIV_DMC0_DMCP_MASK);
-
- tmp |= ((exynos4x12_clkdiv_dmc0[i][0] <<
- EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) |
- (exynos4x12_clkdiv_dmc0[i][1] <<
- EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) |
- (exynos4x12_clkdiv_dmc0[i][2] <<
- EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) |
- (exynos4x12_clkdiv_dmc0[i][3] <<
- EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) |
- (exynos4x12_clkdiv_dmc0[i][4] <<
- EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) |
- (exynos4x12_clkdiv_dmc0[i][5] <<
- EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT));
-
- data->dmc_divtable[i] = tmp;
- }
-
- tmp = 0; /* Max voltages for the reliability of the unknown */
-
- if (tmp > 8)
- tmp = 0;
- pr_debug("ASV Group of Exynos4x12 is %d\n", tmp);
-
- for (i = 0; i < EX4x12_LV_NUM; i++) {
- exynos4x12_mifclk_table[i].volt =
- exynos4x12_mif_step_50[tmp][i];
- exynos4x12_intclk_table[i].volt =
- exynos4x12_int_volt[tmp][i];
- }
-
- for (i = 0; i < EX4x12_LV_NUM; i++) {
- ret = dev_pm_opp_add(data->dev, exynos4x12_mifclk_table[i].clk,
- exynos4x12_mifclk_table[i].volt);
- if (ret) {
- dev_err(data->dev, "Fail to add opp entries.\n");
- return ret;
- }
- }
-
- return 0;
-}
-
-static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this,
- unsigned long event, void *ptr)
-{
- struct busfreq_data *data = container_of(this, struct busfreq_data,
- pm_notifier);
- struct dev_pm_opp *opp;
- struct busfreq_opp_info new_oppinfo;
- unsigned long maxfreq = ULONG_MAX;
- int err = 0;
-
- switch (event) {
- case PM_SUSPEND_PREPARE:
- /* Set Fastest and Deactivate DVFS */
- mutex_lock(&data->lock);
-
- data->disabled = true;
-
- rcu_read_lock();
- opp = dev_pm_opp_find_freq_floor(data->dev, &maxfreq);
- if (IS_ERR(opp)) {
- rcu_read_unlock();
- dev_err(data->dev, "%s: unable to find a min freq\n",
- __func__);
- mutex_unlock(&data->lock);
- return PTR_ERR(opp);
- }
- new_oppinfo.rate = dev_pm_opp_get_freq(opp);
- new_oppinfo.volt = dev_pm_opp_get_voltage(opp);
- rcu_read_unlock();
-
- err = exynos4_bus_setvolt(data, &new_oppinfo,
- &data->curr_oppinfo);
- if (err)
- goto unlock;
-
- switch (data->type) {
- case TYPE_BUSF_EXYNOS4210:
- err = exynos4210_set_busclk(data, &new_oppinfo);
- break;
- case TYPE_BUSF_EXYNOS4x12:
- err = exynos4x12_set_busclk(data, &new_oppinfo);
- break;
- default:
- err = -EINVAL;
- }
- if (err)
- goto unlock;
-
- data->curr_oppinfo = new_oppinfo;
-unlock:
- mutex_unlock(&data->lock);
- if (err)
- return err;
- return NOTIFY_OK;
- case PM_POST_RESTORE:
- case PM_POST_SUSPEND:
- /* Reactivate */
- mutex_lock(&data->lock);
- data->disabled = false;
- mutex_unlock(&data->lock);
- return NOTIFY_OK;
- }
-
- return NOTIFY_DONE;
-}
-
-static int exynos4_busfreq_probe(struct platform_device *pdev)
-{
- struct busfreq_data *data;
- struct busfreq_ppmu_data *ppmu_data;
- struct dev_pm_opp *opp;
- struct device *dev = &pdev->dev;
- int err = 0;
-
- data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data), GFP_KERNEL);
- if (data == NULL) {
- dev_err(dev, "Cannot allocate memory.\n");
- return -ENOMEM;
- }
-
- ppmu_data = &data->ppmu_data;
- ppmu_data->ppmu_end = PPMU_END;
- ppmu_data->ppmu = devm_kzalloc(dev,
- sizeof(struct exynos_ppmu) * PPMU_END,
- GFP_KERNEL);
- if (!ppmu_data->ppmu) {
- dev_err(dev, "Failed to allocate memory for exynos_ppmu\n");
- return -ENOMEM;
- }
-
- data->type = pdev->id_entry->driver_data;
- ppmu_data->ppmu[PPMU_DMC0].hw_base = S5P_VA_DMC0;
- ppmu_data->ppmu[PPMU_DMC1].hw_base = S5P_VA_DMC1;
- data->pm_notifier.notifier_call = exynos4_busfreq_pm_notifier_event;
- data->dev = dev;
- mutex_init(&data->lock);
-
- switch (data->type) {
- case TYPE_BUSF_EXYNOS4210:
- err = exynos4210_init_tables(data);
- break;
- case TYPE_BUSF_EXYNOS4x12:
- err = exynos4x12_init_tables(data);
- break;
- default:
- dev_err(dev, "Cannot determine the device id %d\n", data->type);
- err = -EINVAL;
- }
- if (err) {
- dev_err(dev, "Cannot initialize busfreq table %d\n",
- data->type);
- return err;
- }
-
- data->vdd_int = devm_regulator_get(dev, "vdd_int");
- if (IS_ERR(data->vdd_int)) {
- dev_err(dev, "Cannot get the regulator \"vdd_int\"\n");
- return PTR_ERR(data->vdd_int);
- }
- if (data->type == TYPE_BUSF_EXYNOS4x12) {
- data->vdd_mif = devm_regulator_get(dev, "vdd_mif");
- if (IS_ERR(data->vdd_mif)) {
- dev_err(dev, "Cannot get the regulator \"vdd_mif\"\n");
- return PTR_ERR(data->vdd_mif);
- }
- }
-
- rcu_read_lock();
- opp = dev_pm_opp_find_freq_floor(dev,
- &exynos4_devfreq_profile.initial_freq);
- if (IS_ERR(opp)) {
- rcu_read_unlock();
- dev_err(dev, "Invalid initial frequency %lu kHz.\n",
- exynos4_devfreq_profile.initial_freq);
- return PTR_ERR(opp);
- }
- data->curr_oppinfo.rate = dev_pm_opp_get_freq(opp);
- data->curr_oppinfo.volt = dev_pm_opp_get_voltage(opp);
- rcu_read_unlock();
-
- platform_set_drvdata(pdev, data);
-
- data->devfreq = devm_devfreq_add_device(dev, &exynos4_devfreq_profile,
- "simple_ondemand", NULL);
- if (IS_ERR(data->devfreq))
- return PTR_ERR(data->devfreq);
-
- /*
- * Start PPMU (Performance Profiling Monitoring Unit) to check
- * utilization of each IP in the Exynos4 SoC.
- */
- busfreq_mon_reset(ppmu_data);
-
- /* Register opp_notifier for Exynos4 busfreq */
- err = devm_devfreq_register_opp_notifier(dev, data->devfreq);
- if (err < 0) {
- dev_err(dev, "Failed to register opp notifier\n");
- return err;
- }
-
- /* Register pm_notifier for Exynos4 busfreq */
- err = register_pm_notifier(&data->pm_notifier);
- if (err) {
- dev_err(dev, "Failed to setup pm notifier\n");
- return err;
- }
-
- return 0;
-}
-
-static int exynos4_busfreq_remove(struct platform_device *pdev)
-{
- struct busfreq_data *data = platform_get_drvdata(pdev);
-
- /* Unregister all of notifier chain */
- unregister_pm_notifier(&data->pm_notifier);
-
- return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4_busfreq_resume(struct device *dev)
-{
- struct busfreq_data *data = dev_get_drvdata(dev);
- struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data;
-
- busfreq_mon_reset(ppmu_data);
- return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(exynos4_busfreq_pm_ops, NULL, exynos4_busfreq_resume);
-
-static const struct platform_device_id exynos4_busfreq_id[] = {
- { "exynos4210-busfreq", TYPE_BUSF_EXYNOS4210 },
- { "exynos4412-busfreq", TYPE_BUSF_EXYNOS4x12 },
- { "exynos4212-busfreq", TYPE_BUSF_EXYNOS4x12 },
- { },
-};
-
-static struct platform_driver exynos4_busfreq_driver = {
- .probe = exynos4_busfreq_probe,
- .remove = exynos4_busfreq_remove,
- .id_table = exynos4_busfreq_id,
- .driver = {
- .name = "exynos4-busfreq",
- .pm = &exynos4_busfreq_pm_ops,
- },
-};
-
-static int __init exynos4_busfreq_init(void)
-{
- return platform_driver_register(&exynos4_busfreq_driver);
-}
-late_initcall(exynos4_busfreq_init);
-
-static void __exit exynos4_busfreq_exit(void)
-{
- platform_driver_unregister(&exynos4_busfreq_driver);
-}
-module_exit(exynos4_busfreq_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("EXYNOS4 busfreq driver with devfreq framework");
-MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+++ /dev/null
-/*
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * EXYNOS4 BUS header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __DEVFREQ_EXYNOS4_BUS_H
-#define __DEVFREQ_EXYNOS4_BUS_H __FILE__
-
-#include <mach/map.h>
-
-#define EXYNOS4_CLKDIV_LEFTBUS (S5P_VA_CMU + 0x04500)
-#define EXYNOS4_CLKDIV_STAT_LEFTBUS (S5P_VA_CMU + 0x04600)
-
-#define EXYNOS4_CLKDIV_RIGHTBUS (S5P_VA_CMU + 0x08500)
-#define EXYNOS4_CLKDIV_STAT_RIGHTBUS (S5P_VA_CMU + 0x08600)
-
-#define EXYNOS4_CLKDIV_TOP (S5P_VA_CMU + 0x0C510)
-#define EXYNOS4_CLKDIV_CAM (S5P_VA_CMU + 0x0C520)
-#define EXYNOS4_CLKDIV_MFC (S5P_VA_CMU + 0x0C528)
-
-#define EXYNOS4_CLKDIV_STAT_TOP (S5P_VA_CMU + 0x0C610)
-#define EXYNOS4_CLKDIV_STAT_MFC (S5P_VA_CMU + 0x0C628)
-
-#define EXYNOS4210_CLKGATE_IP_IMAGE (S5P_VA_CMU + 0x0C930)
-#define EXYNOS4212_CLKGATE_IP_IMAGE (S5P_VA_CMU + 0x04930)
-
-#define EXYNOS4_CLKDIV_DMC0 (S5P_VA_CMU + 0x10500)
-#define EXYNOS4_CLKDIV_DMC1 (S5P_VA_CMU + 0x10504)
-#define EXYNOS4_CLKDIV_STAT_DMC0 (S5P_VA_CMU + 0x10600)
-#define EXYNOS4_CLKDIV_STAT_DMC1 (S5P_VA_CMU + 0x10604)
-
-#define EXYNOS4_DMC_PAUSE_CTRL (S5P_VA_CMU + 0x11094)
-#define EXYNOS4_DMC_PAUSE_ENABLE (1 << 0)
-
-#define EXYNOS4_CLKDIV_DMC0_ACP_SHIFT (0)
-#define EXYNOS4_CLKDIV_DMC0_ACP_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_ACP_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT (4)
-#define EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT (8)
-#define EXYNOS4_CLKDIV_DMC0_DPHY_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_DMC_SHIFT (12)
-#define EXYNOS4_CLKDIV_DMC0_DMC_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMC_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT (16)
-#define EXYNOS4_CLKDIV_DMC0_DMCD_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT (20)
-#define EXYNOS4_CLKDIV_DMC0_DMCP_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT (24)
-#define EXYNOS4_CLKDIV_DMC0_COPY2_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT)
-#define EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT (28)
-#define EXYNOS4_CLKDIV_DMC0_CORETI_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT)
-
-#define EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT (0)
-#define EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK (0xf << EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT)
-#define EXYNOS4_CLKDIV_DMC1_C2C_SHIFT (4)
-#define EXYNOS4_CLKDIV_DMC1_C2C_MASK (0x7 << EXYNOS4_CLKDIV_DMC1_C2C_SHIFT)
-#define EXYNOS4_CLKDIV_DMC1_PWI_SHIFT (8)
-#define EXYNOS4_CLKDIV_DMC1_PWI_MASK (0xf << EXYNOS4_CLKDIV_DMC1_PWI_SHIFT)
-#define EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT (12)
-#define EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK (0x7 << EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT)
-#define EXYNOS4_CLKDIV_DMC1_DVSEM_SHIFT (16)
-#define EXYNOS4_CLKDIV_DMC1_DVSEM_MASK (0x7f << EXYNOS4_CLKDIV_DMC1_DVSEM_SHIFT)
-#define EXYNOS4_CLKDIV_DMC1_DPM_SHIFT (24)
-#define EXYNOS4_CLKDIV_DMC1_DPM_MASK (0x7f << EXYNOS4_CLKDIV_DMC1_DPM_SHIFT)
-
-#define EXYNOS4_CLKDIV_MFC_SHIFT (0)
-#define EXYNOS4_CLKDIV_MFC_MASK (0x7 << EXYNOS4_CLKDIV_MFC_SHIFT)
-
-#define EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT (0)
-#define EXYNOS4_CLKDIV_TOP_ACLK200_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT (4)
-#define EXYNOS4_CLKDIV_TOP_ACLK100_MASK (0xF << EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT (8)
-#define EXYNOS4_CLKDIV_TOP_ACLK160_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT (12)
-#define EXYNOS4_CLKDIV_TOP_ACLK133_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT (16)
-#define EXYNOS4_CLKDIV_TOP_ONENAND_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT (20)
-#define EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT)
-#define EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_SHIFT (24)
-#define EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_SHIFT)
-
-#define EXYNOS4_CLKDIV_BUS_GDLR_SHIFT (0)
-#define EXYNOS4_CLKDIV_BUS_GDLR_MASK (0x7 << EXYNOS4_CLKDIV_BUS_GDLR_SHIFT)
-#define EXYNOS4_CLKDIV_BUS_GPLR_SHIFT (4)
-#define EXYNOS4_CLKDIV_BUS_GPLR_MASK (0x7 << EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)
-
-#define EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT (0)
-#define EXYNOS4_CLKDIV_CAM_FIMC0_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT)
-#define EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT (4)
-#define EXYNOS4_CLKDIV_CAM_FIMC1_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT)
-#define EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT (8)
-#define EXYNOS4_CLKDIV_CAM_FIMC2_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT)
-#define EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT (12)
-#define EXYNOS4_CLKDIV_CAM_FIMC3_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT)
-
-#define EXYNOS4_CLKDIV_CAM1 (S5P_VA_CMU + 0x0C568)
-
-#define EXYNOS4_CLKDIV_STAT_CAM1 (S5P_VA_CMU + 0x0C668)
-
-#define EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT (0)
-#define EXYNOS4_CLKDIV_CAM1_JPEG_MASK (0xf << EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT)
-
-#endif /* __DEVFREQ_EXYNOS4_BUS_H */
+++ /dev/null
-/*
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * EXYNOS5 INT clock frequency scaling support using DEVFREQ framework
- * Based on work done by Jonghwan Choi <jhbird.choi@samsung.com>
- * Support for only EXYNOS5250 is present.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/devfreq.h>
-#include <linux/io.h>
-#include <linux/pm_opp.h>
-#include <linux/slab.h>
-#include <linux/suspend.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/pm_qos.h>
-#include <linux/regulator/consumer.h>
-#include <linux/of_address.h>
-#include <linux/of_platform.h>
-
-#include "exynos_ppmu.h"
-
-#define MAX_SAFEVOLT 1100000 /* 1.10V */
-/* Assume that the bus is saturated if the utilization is 25% */
-#define INT_BUS_SATURATION_RATIO 25
-
-enum int_level_idx {
- LV_0,
- LV_1,
- LV_2,
- LV_3,
- LV_4,
- _LV_END
-};
-
-enum exynos_ppmu_list {
- PPMU_RIGHT,
- PPMU_END,
-};
-
-struct busfreq_data_int {
- struct device *dev;
- struct devfreq *devfreq;
- struct regulator *vdd_int;
- struct busfreq_ppmu_data ppmu_data;
- unsigned long curr_freq;
- bool disabled;
-
- struct notifier_block pm_notifier;
- struct mutex lock;
- struct pm_qos_request int_req;
- struct clk *int_clk;
-};
-
-struct int_bus_opp_table {
- unsigned int idx;
- unsigned long clk;
- unsigned long volt;
-};
-
-static struct int_bus_opp_table exynos5_int_opp_table[] = {
- {LV_0, 266000, 1025000},
- {LV_1, 200000, 1025000},
- {LV_2, 160000, 1025000},
- {LV_3, 133000, 1025000},
- {LV_4, 100000, 1025000},
- {0, 0, 0},
-};
-
-static int exynos5_int_setvolt(struct busfreq_data_int *data,
- unsigned long volt)
-{
- return regulator_set_voltage(data->vdd_int, volt, MAX_SAFEVOLT);
-}
-
-static int exynos5_busfreq_int_target(struct device *dev, unsigned long *_freq,
- u32 flags)
-{
- int err = 0;
- struct platform_device *pdev = container_of(dev, struct platform_device,
- dev);
- struct busfreq_data_int *data = platform_get_drvdata(pdev);
- struct dev_pm_opp *opp;
- unsigned long old_freq, freq;
- unsigned long volt;
-
- rcu_read_lock();
- opp = devfreq_recommended_opp(dev, _freq, flags);
- if (IS_ERR(opp)) {
- rcu_read_unlock();
- dev_err(dev, "%s: Invalid OPP.\n", __func__);
- return PTR_ERR(opp);
- }
-
- freq = dev_pm_opp_get_freq(opp);
- volt = dev_pm_opp_get_voltage(opp);
- rcu_read_unlock();
-
- old_freq = data->curr_freq;
-
- if (old_freq == freq)
- return 0;
-
- dev_dbg(dev, "targeting %lukHz %luuV\n", freq, volt);
-
- mutex_lock(&data->lock);
-
- if (data->disabled)
- goto out;
-
- if (freq > exynos5_int_opp_table[0].clk)
- pm_qos_update_request(&data->int_req, freq * 16 / 1000);
- else
- pm_qos_update_request(&data->int_req, -1);
-
- if (old_freq < freq)
- err = exynos5_int_setvolt(data, volt);
- if (err)
- goto out;
-
- err = clk_set_rate(data->int_clk, freq * 1000);
-
- if (err)
- goto out;
-
- if (old_freq > freq)
- err = exynos5_int_setvolt(data, volt);
- if (err)
- goto out;
-
- data->curr_freq = freq;
-out:
- mutex_unlock(&data->lock);
- return err;
-}
-
-static int exynos5_int_get_dev_status(struct device *dev,
- struct devfreq_dev_status *stat)
-{
- struct platform_device *pdev = container_of(dev, struct platform_device,
- dev);
- struct busfreq_data_int *data = platform_get_drvdata(pdev);
- struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data;
- int busier_dmc;
-
- exynos_read_ppmu(ppmu_data);
- busier_dmc = exynos_get_busier_ppmu(ppmu_data);
-
- stat->current_frequency = data->curr_freq;
-
- /* Number of cycles spent on memory access */
- stat->busy_time = ppmu_data->ppmu[busier_dmc].count[PPMU_PMNCNT3];
- stat->busy_time *= 100 / INT_BUS_SATURATION_RATIO;
- stat->total_time = ppmu_data->ppmu[busier_dmc].ccnt;
-
- return 0;
-}
-
-static struct devfreq_dev_profile exynos5_devfreq_int_profile = {
- .initial_freq = 160000,
- .polling_ms = 100,
- .target = exynos5_busfreq_int_target,
- .get_dev_status = exynos5_int_get_dev_status,
-};
-
-static int exynos5250_init_int_tables(struct busfreq_data_int *data)
-{
- int i, err = 0;
-
- for (i = LV_0; i < _LV_END; i++) {
- err = dev_pm_opp_add(data->dev, exynos5_int_opp_table[i].clk,
- exynos5_int_opp_table[i].volt);
- if (err) {
- dev_err(data->dev, "Cannot add opp entries.\n");
- return err;
- }
- }
-
- return 0;
-}
-
-static int exynos5_busfreq_int_pm_notifier_event(struct notifier_block *this,
- unsigned long event, void *ptr)
-{
- struct busfreq_data_int *data = container_of(this,
- struct busfreq_data_int, pm_notifier);
- struct dev_pm_opp *opp;
- unsigned long maxfreq = ULONG_MAX;
- unsigned long freq;
- unsigned long volt;
- int err = 0;
-
- switch (event) {
- case PM_SUSPEND_PREPARE:
- /* Set Fastest and Deactivate DVFS */
- mutex_lock(&data->lock);
-
- data->disabled = true;
-
- rcu_read_lock();
- opp = dev_pm_opp_find_freq_floor(data->dev, &maxfreq);
- if (IS_ERR(opp)) {
- rcu_read_unlock();
- err = PTR_ERR(opp);
- goto unlock;
- }
- freq = dev_pm_opp_get_freq(opp);
- volt = dev_pm_opp_get_voltage(opp);
- rcu_read_unlock();
-
- err = exynos5_int_setvolt(data, volt);
- if (err)
- goto unlock;
-
- err = clk_set_rate(data->int_clk, freq * 1000);
-
- if (err)
- goto unlock;
-
- data->curr_freq = freq;
-unlock:
- mutex_unlock(&data->lock);
- if (err)
- return NOTIFY_BAD;
- return NOTIFY_OK;
- case PM_POST_RESTORE:
- case PM_POST_SUSPEND:
- /* Reactivate */
- mutex_lock(&data->lock);
- data->disabled = false;
- mutex_unlock(&data->lock);
- return NOTIFY_OK;
- }
-
- return NOTIFY_DONE;
-}
-
-static int exynos5_busfreq_int_probe(struct platform_device *pdev)
-{
- struct busfreq_data_int *data;
- struct busfreq_ppmu_data *ppmu_data;
- struct dev_pm_opp *opp;
- struct device *dev = &pdev->dev;
- struct device_node *np;
- unsigned long initial_freq;
- unsigned long initial_volt;
- int err = 0;
- int i;
-
- data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data_int),
- GFP_KERNEL);
- if (data == NULL) {
- dev_err(dev, "Cannot allocate memory.\n");
- return -ENOMEM;
- }
-
- ppmu_data = &data->ppmu_data;
- ppmu_data->ppmu_end = PPMU_END;
- ppmu_data->ppmu = devm_kzalloc(dev,
- sizeof(struct exynos_ppmu) * PPMU_END,
- GFP_KERNEL);
- if (!ppmu_data->ppmu) {
- dev_err(dev, "Failed to allocate memory for exynos_ppmu\n");
- return -ENOMEM;
- }
-
- np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-ppmu");
- if (np == NULL) {
- pr_err("Unable to find PPMU node\n");
- return -ENOENT;
- }
-
- for (i = 0; i < ppmu_data->ppmu_end; i++) {
- /* map PPMU memory region */
- ppmu_data->ppmu[i].hw_base = of_iomap(np, i);
- if (ppmu_data->ppmu[i].hw_base == NULL) {
- dev_err(&pdev->dev, "failed to map memory region\n");
- return -ENOMEM;
- }
- }
- data->pm_notifier.notifier_call = exynos5_busfreq_int_pm_notifier_event;
- data->dev = dev;
- mutex_init(&data->lock);
-
- err = exynos5250_init_int_tables(data);
- if (err)
- return err;
-
- data->vdd_int = devm_regulator_get(dev, "vdd_int");
- if (IS_ERR(data->vdd_int)) {
- dev_err(dev, "Cannot get the regulator \"vdd_int\"\n");
- return PTR_ERR(data->vdd_int);
- }
-
- data->int_clk = devm_clk_get(dev, "int_clk");
- if (IS_ERR(data->int_clk)) {
- dev_err(dev, "Cannot get clock \"int_clk\"\n");
- return PTR_ERR(data->int_clk);
- }
-
- rcu_read_lock();
- opp = dev_pm_opp_find_freq_floor(dev,
- &exynos5_devfreq_int_profile.initial_freq);
- if (IS_ERR(opp)) {
- rcu_read_unlock();
- dev_err(dev, "Invalid initial frequency %lu kHz.\n",
- exynos5_devfreq_int_profile.initial_freq);
- return PTR_ERR(opp);
- }
- initial_freq = dev_pm_opp_get_freq(opp);
- initial_volt = dev_pm_opp_get_voltage(opp);
- rcu_read_unlock();
- data->curr_freq = initial_freq;
-
- err = clk_set_rate(data->int_clk, initial_freq * 1000);
- if (err) {
- dev_err(dev, "Failed to set initial frequency\n");
- return err;
- }
-
- err = exynos5_int_setvolt(data, initial_volt);
- if (err)
- return err;
-
- platform_set_drvdata(pdev, data);
-
- busfreq_mon_reset(ppmu_data);
-
- data->devfreq = devm_devfreq_add_device(dev, &exynos5_devfreq_int_profile,
- "simple_ondemand", NULL);
- if (IS_ERR(data->devfreq))
- return PTR_ERR(data->devfreq);
-
- err = devm_devfreq_register_opp_notifier(dev, data->devfreq);
- if (err < 0) {
- dev_err(dev, "Failed to register opp notifier\n");
- return err;
- }
-
- err = register_pm_notifier(&data->pm_notifier);
- if (err) {
- dev_err(dev, "Failed to setup pm notifier\n");
- return err;
- }
-
- /* TODO: Add a new QOS class for int/mif bus */
- pm_qos_add_request(&data->int_req, PM_QOS_NETWORK_THROUGHPUT, -1);
-
- return 0;
-}
-
-static int exynos5_busfreq_int_remove(struct platform_device *pdev)
-{
- struct busfreq_data_int *data = platform_get_drvdata(pdev);
-
- pm_qos_remove_request(&data->int_req);
- unregister_pm_notifier(&data->pm_notifier);
-
- return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos5_busfreq_int_resume(struct device *dev)
-{
- struct platform_device *pdev = container_of(dev, struct platform_device,
- dev);
- struct busfreq_data_int *data = platform_get_drvdata(pdev);
- struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data;
-
- busfreq_mon_reset(ppmu_data);
- return 0;
-}
-static const struct dev_pm_ops exynos5_busfreq_int_pm = {
- .resume = exynos5_busfreq_int_resume,
-};
-#endif
-static SIMPLE_DEV_PM_OPS(exynos5_busfreq_int_pm_ops, NULL,
- exynos5_busfreq_int_resume);
-
-/* platform device pointer for exynos5 devfreq device. */
-static struct platform_device *exynos5_devfreq_pdev;
-
-static struct platform_driver exynos5_busfreq_int_driver = {
- .probe = exynos5_busfreq_int_probe,
- .remove = exynos5_busfreq_int_remove,
- .driver = {
- .name = "exynos5-bus-int",
- .pm = &exynos5_busfreq_int_pm_ops,
- },
-};
-
-static int __init exynos5_busfreq_int_init(void)
-{
- int ret;
-
- ret = platform_driver_register(&exynos5_busfreq_int_driver);
- if (ret < 0)
- goto out;
-
- exynos5_devfreq_pdev =
- platform_device_register_simple("exynos5-bus-int", -1, NULL, 0);
- if (IS_ERR(exynos5_devfreq_pdev)) {
- ret = PTR_ERR(exynos5_devfreq_pdev);
- goto out1;
- }
-
- return 0;
-out1:
- platform_driver_unregister(&exynos5_busfreq_int_driver);
-out:
- return ret;
-}
-late_initcall(exynos5_busfreq_int_init);
-
-static void __exit exynos5_busfreq_int_exit(void)
-{
- platform_device_unregister(exynos5_devfreq_pdev);
- platform_driver_unregister(&exynos5_busfreq_int_driver);
-}
-module_exit(exynos5_busfreq_int_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("EXYNOS5 busfreq driver with devfreq framework");
+++ /dev/null
-/*
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * EXYNOS - PPMU support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-
-#include "exynos_ppmu.h"
-
-void exynos_ppmu_reset(void __iomem *ppmu_base)
-{
- __raw_writel(PPMU_CYCLE_RESET | PPMU_COUNTER_RESET, ppmu_base);
- __raw_writel(PPMU_ENABLE_CYCLE |
- PPMU_ENABLE_COUNT0 |
- PPMU_ENABLE_COUNT1 |
- PPMU_ENABLE_COUNT2 |
- PPMU_ENABLE_COUNT3,
- ppmu_base + PPMU_CNTENS);
-}
-
-void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch,
- unsigned int evt)
-{
- __raw_writel(evt, ppmu_base + PPMU_BEVTSEL(ch));
-}
-
-void exynos_ppmu_start(void __iomem *ppmu_base)
-{
- __raw_writel(PPMU_ENABLE, ppmu_base);
-}
-
-void exynos_ppmu_stop(void __iomem *ppmu_base)
-{
- __raw_writel(PPMU_DISABLE, ppmu_base);
-}
-
-unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch)
-{
- unsigned int total;
-
- if (ch == PPMU_PMNCNT3)
- total = ((__raw_readl(ppmu_base + PMCNT_OFFSET(ch)) << 8) |
- __raw_readl(ppmu_base + PMCNT_OFFSET(ch + 1)));
- else
- total = __raw_readl(ppmu_base + PMCNT_OFFSET(ch));
-
- return total;
-}
-
-void busfreq_mon_reset(struct busfreq_ppmu_data *ppmu_data)
-{
- unsigned int i;
-
- for (i = 0; i < ppmu_data->ppmu_end; i++) {
- void __iomem *ppmu_base = ppmu_data->ppmu[i].hw_base;
-
- /* Reset the performance and cycle counters */
- exynos_ppmu_reset(ppmu_base);
-
- /* Setup count registers to monitor read/write transactions */
- ppmu_data->ppmu[i].event[PPMU_PMNCNT3] = RDWR_DATA_COUNT;
- exynos_ppmu_setevent(ppmu_base, PPMU_PMNCNT3,
- ppmu_data->ppmu[i].event[PPMU_PMNCNT3]);
-
- exynos_ppmu_start(ppmu_base);
- }
-}
-EXPORT_SYMBOL(busfreq_mon_reset);
-
-void exynos_read_ppmu(struct busfreq_ppmu_data *ppmu_data)
-{
- int i, j;
-
- for (i = 0; i < ppmu_data->ppmu_end; i++) {
- void __iomem *ppmu_base = ppmu_data->ppmu[i].hw_base;
-
- exynos_ppmu_stop(ppmu_base);
-
- /* Update local data from PPMU */
- ppmu_data->ppmu[i].ccnt = __raw_readl(ppmu_base + PPMU_CCNT);
-
- for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) {
- if (ppmu_data->ppmu[i].event[j] == 0)
- ppmu_data->ppmu[i].count[j] = 0;
- else
- ppmu_data->ppmu[i].count[j] =
- exynos_ppmu_read(ppmu_base, j);
- }
- }
-
- busfreq_mon_reset(ppmu_data);
-}
-EXPORT_SYMBOL(exynos_read_ppmu);
-
-int exynos_get_busier_ppmu(struct busfreq_ppmu_data *ppmu_data)
-{
- unsigned int count = 0;
- int i, j, busy = 0;
-
- for (i = 0; i < ppmu_data->ppmu_end; i++) {
- for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) {
- if (ppmu_data->ppmu[i].count[j] > count) {
- count = ppmu_data->ppmu[i].count[j];
- busy = i;
- }
- }
- }
-
- return busy;
-}
-EXPORT_SYMBOL(exynos_get_busier_ppmu);
+++ /dev/null
-/*
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * EXYNOS PPMU header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __DEVFREQ_EXYNOS_PPMU_H
-#define __DEVFREQ_EXYNOS_PPMU_H __FILE__
-
-#include <linux/ktime.h>
-
-/* For PPMU Control */
-#define PPMU_ENABLE BIT(0)
-#define PPMU_DISABLE 0x0
-#define PPMU_CYCLE_RESET BIT(1)
-#define PPMU_COUNTER_RESET BIT(2)
-
-#define PPMU_ENABLE_COUNT0 BIT(0)
-#define PPMU_ENABLE_COUNT1 BIT(1)
-#define PPMU_ENABLE_COUNT2 BIT(2)
-#define PPMU_ENABLE_COUNT3 BIT(3)
-#define PPMU_ENABLE_CYCLE BIT(31)
-
-#define PPMU_CNTENS 0x10
-#define PPMU_FLAG 0x50
-#define PPMU_CCNT_OVERFLOW BIT(31)
-#define PPMU_CCNT 0x100
-
-#define PPMU_PMCNT0 0x110
-#define PPMU_PMCNT_OFFSET 0x10
-#define PMCNT_OFFSET(x) (PPMU_PMCNT0 + (PPMU_PMCNT_OFFSET * x))
-
-#define PPMU_BEVT0SEL 0x1000
-#define PPMU_BEVTSEL_OFFSET 0x100
-#define PPMU_BEVTSEL(x) (PPMU_BEVT0SEL + (ch * PPMU_BEVTSEL_OFFSET))
-
-/* For Event Selection */
-#define RD_DATA_COUNT 0x5
-#define WR_DATA_COUNT 0x6
-#define RDWR_DATA_COUNT 0x7
-
-enum ppmu_counter {
- PPMU_PMNCNT0,
- PPMU_PMCCNT1,
- PPMU_PMNCNT2,
- PPMU_PMNCNT3,
- PPMU_PMNCNT_MAX,
-};
-
-struct bus_opp_table {
- unsigned int idx;
- unsigned long clk;
- unsigned long volt;
-};
-
-struct exynos_ppmu {
- void __iomem *hw_base;
- unsigned int ccnt;
- unsigned int event[PPMU_PMNCNT_MAX];
- unsigned int count[PPMU_PMNCNT_MAX];
- unsigned long long ns;
- ktime_t reset_time;
- bool ccnt_overflow;
- bool count_overflow[PPMU_PMNCNT_MAX];
-};
-
-struct busfreq_ppmu_data {
- struct exynos_ppmu *ppmu;
- int ppmu_end;
-};
-
-void exynos_ppmu_reset(void __iomem *ppmu_base);
-void exynos_ppmu_setevent(void __iomem *ppmu_base, unsigned int ch,
- unsigned int evt);
-void exynos_ppmu_start(void __iomem *ppmu_base);
-void exynos_ppmu_stop(void __iomem *ppmu_base);
-unsigned int exynos_ppmu_read(void __iomem *ppmu_base, unsigned int ch);
-void busfreq_mon_reset(struct busfreq_ppmu_data *ppmu_data);
-void exynos_read_ppmu(struct busfreq_ppmu_data *ppmu_data);
-int exynos_get_busier_ppmu(struct busfreq_ppmu_data *ppmu_data);
-#endif /* __DEVFREQ_EXYNOS_PPMU_H */
--- /dev/null
+/*
+ * linux/drivers/devfreq/governor_passive.c
+ *
+ * Copyright (C) 2016 Samsung Electronics
+ * Author: Chanwoo Choi <cw00.choi@samsung.com>
+ * Author: MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/devfreq.h>
+#include "governor.h"
+
+static int devfreq_passive_get_target_freq(struct devfreq *devfreq,
+ unsigned long *freq)
+{
+ struct devfreq_passive_data *p_data
+ = (struct devfreq_passive_data *)devfreq->data;
+ struct devfreq *parent_devfreq = (struct devfreq *)p_data->parent;
+ unsigned long child_freq = ULONG_MAX;
+ struct dev_pm_opp *opp;
+ int i, count, ret = 0;
+
+ /*
+ * If the devfreq device with passive governor has the specific method
+ * to determine the next frequency, should use the get_target_freq()
+ * of struct devfreq_passive_data.
+ */
+ if (p_data->get_target_freq) {
+ ret = p_data->get_target_freq(devfreq, freq);
+ goto out;
+ }
+
+ /*
+ * If the parent and passive devfreq device uses the OPP table,
+ * get the next frequency by using the OPP table.
+ */
+
+ /*
+ * - parent devfreq device uses the governors except for passive.
+ * - passive devfreq device uses the passive governor.
+ *
+ * Each devfreq has the OPP table. After deciding the new frequency
+ * from the governor of parent devfreq device, the passive governor
+ * need to get the index of new frequency on OPP table of parent
+ * device. And then the index is used for getting the suitable
+ * new frequency for passive devfreq device.
+ */
+ if (!devfreq->profile || !devfreq->profile->freq_table
+ || devfreq->profile->max_state <= 0)
+ return -EINVAL;
+
+ /*
+ * The passive governor have to get the correct frequency from OPP
+ * list of parent device. Because in this case, *freq is temporary
+ * value which is decided by ondemand governor.
+ */
+ rcu_read_lock();
+ opp = devfreq_recommended_opp(parent_devfreq->dev.parent, freq, 0);
+ rcu_read_unlock();
+ if (IS_ERR(opp)) {
+ ret = PTR_ERR(opp);
+ goto out;
+ }
+
+ /*
+ * Get the OPP table's index of decided freqeuncy by governor
+ * of parent device.
+ */
+ for (i = 0; i < parent_devfreq->profile->max_state; i++)
+ if (parent_devfreq->profile->freq_table[i] == *freq)
+ break;
+
+ if (i == parent_devfreq->profile->max_state) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* Get the suitable frequency by using index of parent device. */
+ if (i < devfreq->profile->max_state) {
+ child_freq = devfreq->profile->freq_table[i];
+ } else {
+ count = devfreq->profile->max_state;
+ child_freq = devfreq->profile->freq_table[count - 1];
+ }
+
+ /* Return the suitable frequency for passive device. */
+ *freq = child_freq;
+
+out:
+ return ret;
+}
+
+static int update_devfreq_passive(struct devfreq *devfreq, unsigned long freq)
+{
+ int ret;
+
+ if (!devfreq->governor)
+ return -EINVAL;
+
+ mutex_lock_nested(&devfreq->lock, SINGLE_DEPTH_NESTING);
+
+ ret = devfreq->governor->get_target_freq(devfreq, &freq);
+ if (ret < 0)
+ goto out;
+
+ ret = devfreq->profile->target(devfreq->dev.parent, &freq, 0);
+ if (ret < 0)
+ goto out;
+
+ devfreq->previous_freq = freq;
+
+out:
+ mutex_unlock(&devfreq->lock);
+
+ return 0;
+}
+
+static int devfreq_passive_notifier_call(struct notifier_block *nb,
+ unsigned long event, void *ptr)
+{
+ struct devfreq_passive_data *data
+ = container_of(nb, struct devfreq_passive_data, nb);
+ struct devfreq *devfreq = (struct devfreq *)data->this;
+ struct devfreq *parent = (struct devfreq *)data->parent;
+ struct devfreq_freqs *freqs = (struct devfreq_freqs *)ptr;
+ unsigned long freq = freqs->new;
+
+ switch (event) {
+ case DEVFREQ_PRECHANGE:
+ if (parent->previous_freq > freq)
+ update_devfreq_passive(devfreq, freq);
+ break;
+ case DEVFREQ_POSTCHANGE:
+ if (parent->previous_freq < freq)
+ update_devfreq_passive(devfreq, freq);
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static int devfreq_passive_event_handler(struct devfreq *devfreq,
+ unsigned int event, void *data)
+{
+ struct device *dev = devfreq->dev.parent;
+ struct devfreq_passive_data *p_data
+ = (struct devfreq_passive_data *)devfreq->data;
+ struct devfreq *parent = (struct devfreq *)p_data->parent;
+ struct notifier_block *nb = &p_data->nb;
+ int ret = 0;
+
+ if (!parent)
+ return -EPROBE_DEFER;
+
+ switch (event) {
+ case DEVFREQ_GOV_START:
+ if (!p_data->this)
+ p_data->this = devfreq;
+
+ nb->notifier_call = devfreq_passive_notifier_call;
+ ret = devm_devfreq_register_notifier(dev, parent, nb,
+ DEVFREQ_TRANSITION_NOTIFIER);
+ break;
+ case DEVFREQ_GOV_STOP:
+ devm_devfreq_unregister_notifier(dev, parent, nb,
+ DEVFREQ_TRANSITION_NOTIFIER);
+ break;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+static struct devfreq_governor devfreq_passive = {
+ .name = "passive",
+ .get_target_freq = devfreq_passive_get_target_freq,
+ .event_handler = devfreq_passive_event_handler,
+};
+
+static int __init devfreq_passive_init(void)
+{
+ return devfreq_add_governor(&devfreq_passive);
+}
+subsys_initcall(devfreq_passive_init);
+
+static void __exit devfreq_passive_exit(void)
+{
+ int ret;
+
+ ret = devfreq_remove_governor(&devfreq_passive);
+ if (ret)
+ pr_err("%s: failed remove governor %d\n", __func__, ret);
+}
+module_exit(devfreq_passive_exit);
+
+MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_DESCRIPTION("DEVFREQ Passive governor");
+MODULE_LICENSE("GPL v2");
i7_dev = get_i7core_dev(mce->socketid);
if (!i7_dev)
- return NOTIFY_BAD;
+ return NOTIFY_DONE;
mci = i7_dev->mci;
pvt = mci->pvt_info;
mci = get_mci_for_node_id(mce->socketid);
if (!mci)
- return NOTIFY_BAD;
+ return NOTIFY_DONE;
pvt = mci->pvt_info;
/*
{ NULL_GUID, "", NULL },
};
+/*
+ * Check if @var_name matches the pattern given in @match_name.
+ *
+ * @var_name: an array of @len non-NUL characters.
+ * @match_name: a NUL-terminated pattern string, optionally ending in "*". A
+ * final "*" character matches any trailing characters @var_name,
+ * including the case when there are none left in @var_name.
+ * @match: on output, the number of non-wildcard characters in @match_name
+ * that @var_name matches, regardless of the return value.
+ * @return: whether @var_name fully matches @match_name.
+ */
static bool
variable_matches(const char *var_name, size_t len, const char *match_name,
int *match)
{
for (*match = 0; ; (*match)++) {
char c = match_name[*match];
- char u = var_name[*match];
- /* Wildcard in the matching name means we've matched */
- if (c == '*')
+ switch (c) {
+ case '*':
+ /* Wildcard in @match_name means we've matched. */
return true;
- /* Case sensitive match */
- if (!c && *match == len)
- return true;
+ case '\0':
+ /* @match_name has ended. Has @var_name too? */
+ return (*match == len);
- if (c != u)
+ default:
+ /*
+ * We've reached a non-wildcard char in @match_name.
+ * Continue only if there's an identical character in
+ * @var_name.
+ */
+ if (*match < len && c == var_name[*match])
+ continue;
return false;
-
- if (!c)
- return true;
+ }
}
- return true;
}
bool
/* ARM specific CPU idle operations */
#ifdef CONFIG_ARM
-static struct cpuidle_ops psci_cpuidle_ops __initdata = {
+static const struct cpuidle_ops psci_cpuidle_ops __initconst = {
.suspend = psci_cpu_suspend_enter,
.init = psci_dt_cpu_init_idle,
};
-CPUIDLE_METHOD_OF_DECLARE(psci, "arm,psci", &psci_cpuidle_ops);
+CPUIDLE_METHOD_OF_DECLARE(psci, "psci", &psci_cpuidle_ops);
#endif
#endif
static inline void fw_cfg_read_blob(u16 key,
void *buf, loff_t pos, size_t count)
{
- u32 glk;
+ u32 glk = -1U;
acpi_status status;
/* If we have ACPI, ensure mutual exclusion against any potential
return 0;
}
-static void gpio_rcar_irq_bus_lock(struct irq_data *d)
-{
- struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
- struct gpio_rcar_priv *p = gpiochip_get_data(gc);
-
- pm_runtime_get_sync(&p->pdev->dev);
-}
-
-static void gpio_rcar_irq_bus_sync_unlock(struct irq_data *d)
-{
- struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
- struct gpio_rcar_priv *p = gpiochip_get_data(gc);
-
- pm_runtime_put(&p->pdev->dev);
-}
-
-
-static int gpio_rcar_irq_request_resources(struct irq_data *d)
-{
- struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
- struct gpio_rcar_priv *p = gpiochip_get_data(gc);
- int error;
-
- error = pm_runtime_get_sync(&p->pdev->dev);
- if (error < 0)
- return error;
-
- return 0;
-}
-
-static void gpio_rcar_irq_release_resources(struct irq_data *d)
-{
- struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
- struct gpio_rcar_priv *p = gpiochip_get_data(gc);
-
- pm_runtime_put(&p->pdev->dev);
-}
-
static irqreturn_t gpio_rcar_irq_handler(int irq, void *dev_id)
{
struct gpio_rcar_priv *p = dev_id;
static int gpio_rcar_request(struct gpio_chip *chip, unsigned offset)
{
- struct gpio_rcar_priv *p = gpiochip_get_data(chip);
- int error;
-
- error = pm_runtime_get_sync(&p->pdev->dev);
- if (error < 0)
- return error;
-
- error = pinctrl_request_gpio(chip->base + offset);
- if (error)
- pm_runtime_put(&p->pdev->dev);
-
- return error;
+ return pinctrl_request_gpio(chip->base + offset);
}
static void gpio_rcar_free(struct gpio_chip *chip, unsigned offset)
{
- struct gpio_rcar_priv *p = gpiochip_get_data(chip);
-
pinctrl_free_gpio(chip->base + offset);
- /* Set the GPIO as an input to ensure that the next GPIO request won't
+ /*
+ * Set the GPIO as an input to ensure that the next GPIO request won't
* drive the GPIO pin as an output.
*/
gpio_rcar_config_general_input_output_mode(chip, offset, false);
-
- pm_runtime_put(&p->pdev->dev);
}
static int gpio_rcar_direction_input(struct gpio_chip *chip, unsigned offset)
}
pm_runtime_enable(dev);
+ pm_runtime_get_sync(dev);
io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
irq_chip->irq_unmask = gpio_rcar_irq_enable;
irq_chip->irq_set_type = gpio_rcar_irq_set_type;
irq_chip->irq_set_wake = gpio_rcar_irq_set_wake;
- irq_chip->irq_bus_lock = gpio_rcar_irq_bus_lock;
- irq_chip->irq_bus_sync_unlock = gpio_rcar_irq_bus_sync_unlock;
- irq_chip->irq_request_resources = gpio_rcar_irq_request_resources;
- irq_chip->irq_release_resources = gpio_rcar_irq_release_resources;
irq_chip->flags = IRQCHIP_SET_TYPE_MASKED | IRQCHIP_MASK_ON_SUSPEND;
ret = gpiochip_add_data(gpio_chip, p);
err1:
gpiochip_remove(gpio_chip);
err0:
+ pm_runtime_put(dev);
pm_runtime_disable(dev);
return ret;
}
gpiochip_remove(&p->gpio_chip);
+ pm_runtime_put(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
}
lookup = kmalloc(sizeof(*lookup), GFP_KERNEL);
if (lookup) {
lookup->adev = adev;
- lookup->con_id = con_id;
+ lookup->con_id = kstrdup(con_id, GFP_KERNEL);
list_add_tail(&lookup->node, &acpi_crs_lookup_list);
}
}
return amdgpu_atpx_priv.atpx_detected;
}
-bool amdgpu_has_atpx_dgpu_power_cntl(void) {
- return amdgpu_atpx_priv.atpx.functions.power_cntl;
-}
-
/**
* amdgpu_atpx_call - call an ATPX method
*
*/
static int amdgpu_atpx_validate(struct amdgpu_atpx *atpx)
{
+ /* make sure required functions are enabled */
+ /* dGPU power control is required */
+ if (atpx->functions.power_cntl == false) {
+ printk("ATPX dGPU power cntl not present, forcing\n");
+ atpx->functions.power_cntl = true;
+ }
+
if (atpx->functions.px_params) {
union acpi_object *info;
struct atpx_px_params output;
"LAST",
};
-#if defined(CONFIG_VGA_SWITCHEROO)
-bool amdgpu_has_atpx_dgpu_power_cntl(void);
-#else
-static inline bool amdgpu_has_atpx_dgpu_power_cntl(void) { return false; }
-#endif
-
bool amdgpu_device_is_px(struct drm_device *dev)
{
struct amdgpu_device *adev = dev->dev_private;
if (amdgpu_runtime_pm == 1)
runtime = true;
- if (amdgpu_device_is_px(ddev) && amdgpu_has_atpx_dgpu_power_cntl())
+ if (amdgpu_device_is_px(ddev))
runtime = true;
vga_switcheroo_register_client(adev->pdev, &amdgpu_switcheroo_ops, runtime);
if (runtime)
if (!metadata_size) {
if (bo->metadata_size) {
kfree(bo->metadata);
+ bo->metadata = NULL;
bo->metadata_size = 0;
}
return 0;
&& (mode->crtc_vsync_start < (mode->crtc_vdisplay + 2)))
adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2;
+ /* vertical FP must be at least 1 */
+ if (mode->crtc_vsync_start == mode->crtc_vdisplay)
+ adjusted_mode->crtc_vsync_start++;
+
/* get the native mode for scaling */
if (amdgpu_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT))
amdgpu_panel_mode_fixup(encoder, adjusted_mode);
{
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
- return amdgpu_irq_get(adev, &adev->mc.vm_fault, 0);
+ if (amdgpu_vm_fault_stop != AMDGPU_VM_FAULT_STOP_ALWAYS)
+ return amdgpu_irq_get(adev, &adev->mc.vm_fault, 0);
+ else
+ return 0;
}
static int gmc_v7_0_sw_init(void *handle)
{
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
- return amdgpu_irq_get(adev, &adev->mc.vm_fault, 0);
+ if (amdgpu_vm_fault_stop != AMDGPU_VM_FAULT_STOP_ALWAYS)
+ return amdgpu_irq_get(adev, &adev->mc.vm_fault, 0);
+ else
+ return 0;
}
#define mmMC_SEQ_MISC0_FIJI 0xA71
req_payload.start_slot = cur_slots;
if (mgr->proposed_vcpis[i]) {
port = container_of(mgr->proposed_vcpis[i], struct drm_dp_mst_port, vcpi);
+ port = drm_dp_get_validated_port_ref(mgr, port);
+ if (!port) {
+ mutex_unlock(&mgr->payload_lock);
+ return -EINVAL;
+ }
req_payload.num_slots = mgr->proposed_vcpis[i]->num_slots;
req_payload.vcpi = mgr->proposed_vcpis[i]->vcpi;
} else {
mgr->payloads[i].payload_state = req_payload.payload_state;
}
cur_slots += req_payload.num_slots;
+
+ if (port)
+ drm_dp_put_port(port);
}
for (i = 0; i < mgr->max_payloads; i++) {
if (mgr->mst_primary) {
int sret;
+ u8 guid[16];
+
sret = drm_dp_dpcd_read(mgr->aux, DP_DPCD_REV, mgr->dpcd, DP_RECEIVER_CAP_SIZE);
if (sret != DP_RECEIVER_CAP_SIZE) {
DRM_DEBUG_KMS("dpcd read failed - undocked during suspend?\n");
ret = -1;
goto out_unlock;
}
+
+ /* Some hubs forget their guids after they resume */
+ sret = drm_dp_dpcd_read(mgr->aux, DP_GUID, guid, 16);
+ if (sret != 16) {
+ DRM_DEBUG_KMS("dpcd read failed - undocked during suspend?\n");
+ ret = -1;
+ goto out_unlock;
+ }
+ drm_dp_check_mstb_guid(mgr->mst_primary, guid);
+
ret = 0;
} else
ret = -1;
goto fail;
}
+ /*
+ * Set the GPU linear window to be at the end of the DMA window, where
+ * the CMA area is likely to reside. This ensures that we are able to
+ * map the command buffers while having the linear window overlap as
+ * much RAM as possible, so we can optimize mappings for other buffers.
+ *
+ * For 3D cores only do this if MC2.0 is present, as with MC1.0 it leads
+ * to different views of the memory on the individual engines.
+ */
+ if (!(gpu->identity.features & chipFeatures_PIPE_3D) ||
+ (gpu->identity.minor_features0 & chipMinorFeatures0_MC20)) {
+ u32 dma_mask = (u32)dma_get_required_mask(gpu->dev);
+ if (dma_mask < PHYS_OFFSET + SZ_2G)
+ gpu->memory_base = PHYS_OFFSET;
+ else
+ gpu->memory_base = dma_mask - SZ_2G + 1;
+ }
+
ret = etnaviv_hw_reset(gpu);
if (ret)
goto fail;
{
struct device *dev = &pdev->dev;
struct etnaviv_gpu *gpu;
- u32 dma_mask;
int err = 0;
gpu = devm_kzalloc(dev, sizeof(*gpu), GFP_KERNEL);
gpu->dev = &pdev->dev;
mutex_init(&gpu->lock);
- /*
- * Set the GPU linear window to be at the end of the DMA window, where
- * the CMA area is likely to reside. This ensures that we are able to
- * map the command buffers while having the linear window overlap as
- * much RAM as possible, so we can optimize mappings for other buffers.
- */
- dma_mask = (u32)dma_get_required_mask(dev);
- if (dma_mask < PHYS_OFFSET + SZ_2G)
- gpu->memory_base = PHYS_OFFSET;
- else
- gpu->memory_base = dma_mask - SZ_2G + 1;
-
/* Map registers: */
gpu->mmio = etnaviv_ioremap(pdev, NULL, dev_name(gpu->dev));
if (IS_ERR(gpu->mmio))
static int i915_drm_resume_early(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- int ret = 0;
+ int ret;
/*
* We have a resume ordering issue with the snd-hda driver also
* FIXME: This should be solved with a special hdmi sink device or
* similar so that power domains can be employed.
*/
+
+ /*
+ * Note that we need to set the power state explicitly, since we
+ * powered off the device during freeze and the PCI core won't power
+ * it back up for us during thaw. Powering off the device during
+ * freeze is not a hard requirement though, and during the
+ * suspend/resume phases the PCI core makes sure we get here with the
+ * device powered on. So in case we change our freeze logic and keep
+ * the device powered we can also remove the following set power state
+ * call.
+ */
+ ret = pci_set_power_state(dev->pdev, PCI_D0);
+ if (ret) {
+ DRM_ERROR("failed to set PCI D0 power state (%d)\n", ret);
+ goto out;
+ }
+
+ /*
+ * Note that pci_enable_device() first enables any parent bridge
+ * device and only then sets the power state for this device. The
+ * bridge enabling is a nop though, since bridge devices are resumed
+ * first. The order of enabling power and enabling the device is
+ * imposed by the PCI core as described above, so here we preserve the
+ * same order for the freeze/thaw phases.
+ *
+ * TODO: eventually we should remove pci_disable_device() /
+ * pci_enable_enable_device() from suspend/resume. Due to how they
+ * depend on the device enable refcount we can't anyway depend on them
+ * disabling/enabling the device.
+ */
if (pci_enable_device(dev->pdev)) {
ret = -EIO;
goto out;
#define GEN6_RP_STATE_CAP _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5998)
#define BXT_RP_STATE_CAP _MMIO(0x138170)
-#define INTERVAL_1_28_US(us) (((us) * 100) >> 7)
+/*
+ * Make these a multiple of magic 25 to avoid SNB (eg. Dell XPS
+ * 8300) freezing up around GPU hangs. Looks as if even
+ * scheduling/timer interrupts start misbehaving if the RPS
+ * EI/thresholds are "bad", leading to a very sluggish or even
+ * frozen machine.
+ */
+#define INTERVAL_1_28_US(us) roundup(((us) * 100) >> 7, 25)
#define INTERVAL_1_33_US(us) (((us) * 3) >> 2)
#define INTERVAL_0_833_US(us) (((us) * 6) / 5)
#define GT_INTERVAL_FROM_US(dev_priv, us) (IS_GEN9(dev_priv) ? \
} else if (IS_BROADWELL(dev_priv)) {
ddi_translations_fdi = bdw_ddi_translations_fdi;
ddi_translations_dp = bdw_ddi_translations_dp;
- ddi_translations_edp = bdw_ddi_translations_edp;
+
+ if (dev_priv->edp_low_vswing) {
+ ddi_translations_edp = bdw_ddi_translations_edp;
+ n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_edp);
+ } else {
+ ddi_translations_edp = bdw_ddi_translations_dp;
+ n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_dp);
+ }
+
ddi_translations_hdmi = bdw_ddi_translations_hdmi;
- n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_edp);
+
n_dp_entries = ARRAY_SIZE(bdw_ddi_translations_dp);
n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi);
hdmi_default_entry = 7;
intel_ddi_clock_get(encoder, pipe_config);
}
-static void intel_ddi_destroy(struct drm_encoder *encoder)
-{
- /* HDMI has nothing special to destroy, so we can go with this. */
- intel_dp_encoder_destroy(encoder);
-}
-
static bool intel_ddi_compute_config(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config)
{
}
static const struct drm_encoder_funcs intel_ddi_funcs = {
- .destroy = intel_ddi_destroy,
+ .reset = intel_dp_encoder_reset,
+ .destroy = intel_dp_encoder_destroy,
};
static struct intel_connector *
intel_encoder->post_disable = intel_ddi_post_disable;
intel_encoder->get_hw_state = intel_ddi_get_hw_state;
intel_encoder->get_config = intel_ddi_get_config;
+ intel_encoder->suspend = intel_dp_encoder_suspend;
intel_dig_port->port = port;
intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) &
}
for_each_crtc_in_state(state, crtc, crtc_state, i) {
+ if (state->legacy_cursor_update)
+ continue;
+
ret = intel_crtc_wait_for_pending_flips(crtc);
if (ret)
return ret;
kfree(intel_dig_port);
}
-static void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder)
+void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
edp_panel_vdd_schedule_off(intel_dp);
}
-static void intel_dp_encoder_reset(struct drm_encoder *encoder)
+void intel_dp_encoder_reset(struct drm_encoder *encoder)
{
struct intel_dp *intel_dp;
void intel_dp_start_link_train(struct intel_dp *intel_dp);
void intel_dp_stop_link_train(struct intel_dp *intel_dp);
void intel_dp_sink_dpms(struct intel_dp *intel_dp, int mode);
+void intel_dp_encoder_reset(struct drm_encoder *encoder);
+void intel_dp_encoder_suspend(struct intel_encoder *intel_encoder);
void intel_dp_encoder_destroy(struct drm_encoder *encoder);
int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc);
bool intel_dp_compute_config(struct intel_encoder *encoder,
hdmi_to_dig_port(intel_hdmi));
}
- if (!live_status)
- DRM_DEBUG_KMS("Live status not up!");
+ if (!live_status) {
+ DRM_DEBUG_KMS("HDMI live status down\n");
+ /*
+ * Live status register is not reliable on all intel platforms.
+ * So consider live_status only for certain platforms, for
+ * others, read EDID to determine presence of sink.
+ */
+ if (INTEL_INFO(dev_priv)->gen < 7 || IS_IVYBRIDGE(dev_priv))
+ live_status = true;
+ }
intel_hdmi_unset_edid(connector);
&& (mode->crtc_vsync_start < (mode->crtc_vdisplay + 2)))
adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2;
+ /* vertical FP must be at least 1 */
+ if (mode->crtc_vsync_start == mode->crtc_vdisplay)
+ adjusted_mode->crtc_vsync_start++;
+
/* get the native mode for scaling */
if (radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT)) {
radeon_panel_mode_fixup(encoder, adjusted_mode);
WREG32(VM_CONTEXT1_CNTL, 0);
}
+static const unsigned ni_dig_offsets[] =
+{
+ NI_DIG0_REGISTER_OFFSET,
+ NI_DIG1_REGISTER_OFFSET,
+ NI_DIG2_REGISTER_OFFSET,
+ NI_DIG3_REGISTER_OFFSET,
+ NI_DIG4_REGISTER_OFFSET,
+ NI_DIG5_REGISTER_OFFSET
+};
+
+static const unsigned ni_tx_offsets[] =
+{
+ NI_DCIO_UNIPHY0_UNIPHY_TX_CONTROL1,
+ NI_DCIO_UNIPHY1_UNIPHY_TX_CONTROL1,
+ NI_DCIO_UNIPHY2_UNIPHY_TX_CONTROL1,
+ NI_DCIO_UNIPHY3_UNIPHY_TX_CONTROL1,
+ NI_DCIO_UNIPHY4_UNIPHY_TX_CONTROL1,
+ NI_DCIO_UNIPHY5_UNIPHY_TX_CONTROL1
+};
+
+static const unsigned evergreen_dp_offsets[] =
+{
+ EVERGREEN_DP0_REGISTER_OFFSET,
+ EVERGREEN_DP1_REGISTER_OFFSET,
+ EVERGREEN_DP2_REGISTER_OFFSET,
+ EVERGREEN_DP3_REGISTER_OFFSET,
+ EVERGREEN_DP4_REGISTER_OFFSET,
+ EVERGREEN_DP5_REGISTER_OFFSET
+};
+
+
+/*
+ * Assumption is that EVERGREEN_CRTC_MASTER_EN enable for requested crtc
+ * We go from crtc to connector and it is not relible since it
+ * should be an opposite direction .If crtc is enable then
+ * find the dig_fe which selects this crtc and insure that it enable.
+ * if such dig_fe is found then find dig_be which selects found dig_be and
+ * insure that it enable and in DP_SST mode.
+ * if UNIPHY_PLL_CONTROL1.enable then we should disconnect timing
+ * from dp symbols clocks .
+ */
+static bool evergreen_is_dp_sst_stream_enabled(struct radeon_device *rdev,
+ unsigned crtc_id, unsigned *ret_dig_fe)
+{
+ unsigned i;
+ unsigned dig_fe;
+ unsigned dig_be;
+ unsigned dig_en_be;
+ unsigned uniphy_pll;
+ unsigned digs_fe_selected;
+ unsigned dig_be_mode;
+ unsigned dig_fe_mask;
+ bool is_enabled = false;
+ bool found_crtc = false;
+
+ /* loop through all running dig_fe to find selected crtc */
+ for (i = 0; i < ARRAY_SIZE(ni_dig_offsets); i++) {
+ dig_fe = RREG32(NI_DIG_FE_CNTL + ni_dig_offsets[i]);
+ if (dig_fe & NI_DIG_FE_CNTL_SYMCLK_FE_ON &&
+ crtc_id == NI_DIG_FE_CNTL_SOURCE_SELECT(dig_fe)) {
+ /* found running pipe */
+ found_crtc = true;
+ dig_fe_mask = 1 << i;
+ dig_fe = i;
+ break;
+ }
+ }
+
+ if (found_crtc) {
+ /* loop through all running dig_be to find selected dig_fe */
+ for (i = 0; i < ARRAY_SIZE(ni_dig_offsets); i++) {
+ dig_be = RREG32(NI_DIG_BE_CNTL + ni_dig_offsets[i]);
+ /* if dig_fe_selected by dig_be? */
+ digs_fe_selected = NI_DIG_BE_CNTL_FE_SOURCE_SELECT(dig_be);
+ dig_be_mode = NI_DIG_FE_CNTL_MODE(dig_be);
+ if (dig_fe_mask & digs_fe_selected &&
+ /* if dig_be in sst mode? */
+ dig_be_mode == NI_DIG_BE_DPSST) {
+ dig_en_be = RREG32(NI_DIG_BE_EN_CNTL +
+ ni_dig_offsets[i]);
+ uniphy_pll = RREG32(NI_DCIO_UNIPHY0_PLL_CONTROL1 +
+ ni_tx_offsets[i]);
+ /* dig_be enable and tx is running */
+ if (dig_en_be & NI_DIG_BE_EN_CNTL_ENABLE &&
+ dig_en_be & NI_DIG_BE_EN_CNTL_SYMBCLK_ON &&
+ uniphy_pll & NI_DCIO_UNIPHY0_PLL_CONTROL1_ENABLE) {
+ is_enabled = true;
+ *ret_dig_fe = dig_fe;
+ break;
+ }
+ }
+ }
+ }
+
+ return is_enabled;
+}
+
+/*
+ * Blank dig when in dp sst mode
+ * Dig ignores crtc timing
+ */
+static void evergreen_blank_dp_output(struct radeon_device *rdev,
+ unsigned dig_fe)
+{
+ unsigned stream_ctrl;
+ unsigned fifo_ctrl;
+ unsigned counter = 0;
+
+ if (dig_fe >= ARRAY_SIZE(evergreen_dp_offsets)) {
+ DRM_ERROR("invalid dig_fe %d\n", dig_fe);
+ return;
+ }
+
+ stream_ctrl = RREG32(EVERGREEN_DP_VID_STREAM_CNTL +
+ evergreen_dp_offsets[dig_fe]);
+ if (!(stream_ctrl & EVERGREEN_DP_VID_STREAM_CNTL_ENABLE)) {
+ DRM_ERROR("dig %d , should be enable\n", dig_fe);
+ return;
+ }
+
+ stream_ctrl &=~EVERGREEN_DP_VID_STREAM_CNTL_ENABLE;
+ WREG32(EVERGREEN_DP_VID_STREAM_CNTL +
+ evergreen_dp_offsets[dig_fe], stream_ctrl);
+
+ stream_ctrl = RREG32(EVERGREEN_DP_VID_STREAM_CNTL +
+ evergreen_dp_offsets[dig_fe]);
+ while (counter < 32 && stream_ctrl & EVERGREEN_DP_VID_STREAM_STATUS) {
+ msleep(1);
+ counter++;
+ stream_ctrl = RREG32(EVERGREEN_DP_VID_STREAM_CNTL +
+ evergreen_dp_offsets[dig_fe]);
+ }
+ if (counter >= 32 )
+ DRM_ERROR("counter exceeds %d\n", counter);
+
+ fifo_ctrl = RREG32(EVERGREEN_DP_STEER_FIFO + evergreen_dp_offsets[dig_fe]);
+ fifo_ctrl |= EVERGREEN_DP_STEER_FIFO_RESET;
+ WREG32(EVERGREEN_DP_STEER_FIFO + evergreen_dp_offsets[dig_fe], fifo_ctrl);
+
+}
+
void evergreen_mc_stop(struct radeon_device *rdev, struct evergreen_mc_save *save)
{
u32 crtc_enabled, tmp, frame_count, blackout;
int i, j;
+ unsigned dig_fe;
if (!ASIC_IS_NODCE(rdev)) {
save->vga_render_control = RREG32(VGA_RENDER_CONTROL);
break;
udelay(1);
}
-
+ /*we should disable dig if it drives dp sst*/
+ /*but we are in radeon_device_init and the topology is unknown*/
+ /*and it is available after radeon_modeset_init*/
+ /*the following method radeon_atom_encoder_dpms_dig*/
+ /*does the job if we initialize it properly*/
+ /*for now we do it this manually*/
+ /**/
+ if (ASIC_IS_DCE5(rdev) &&
+ evergreen_is_dp_sst_stream_enabled(rdev, i ,&dig_fe))
+ evergreen_blank_dp_output(rdev, dig_fe);
+ /*we could remove 6 lines below*/
/* XXX this is a hack to avoid strange behavior with EFI on certain systems */
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + crtc_offsets[i], 1);
tmp = RREG32(EVERGREEN_CRTC_CONTROL + crtc_offsets[i]);
/* HDMI blocks at 0x7030, 0x7c30, 0x10830, 0x11430, 0x12030, 0x12c30 */
#define EVERGREEN_HDMI_BASE 0x7030
+/*DIG block*/
+#define NI_DIG0_REGISTER_OFFSET (0x7000 - 0x7000)
+#define NI_DIG1_REGISTER_OFFSET (0x7C00 - 0x7000)
+#define NI_DIG2_REGISTER_OFFSET (0x10800 - 0x7000)
+#define NI_DIG3_REGISTER_OFFSET (0x11400 - 0x7000)
+#define NI_DIG4_REGISTER_OFFSET (0x12000 - 0x7000)
+#define NI_DIG5_REGISTER_OFFSET (0x12C00 - 0x7000)
+
+
+#define NI_DIG_FE_CNTL 0x7000
+# define NI_DIG_FE_CNTL_SOURCE_SELECT(x) ((x) & 0x3)
+# define NI_DIG_FE_CNTL_SYMCLK_FE_ON (1<<24)
+
+
+#define NI_DIG_BE_CNTL 0x7140
+# define NI_DIG_BE_CNTL_FE_SOURCE_SELECT(x) (((x) >> 8 ) & 0x3F)
+# define NI_DIG_FE_CNTL_MODE(x) (((x) >> 16) & 0x7 )
+
+#define NI_DIG_BE_EN_CNTL 0x7144
+# define NI_DIG_BE_EN_CNTL_ENABLE (1 << 0)
+# define NI_DIG_BE_EN_CNTL_SYMBCLK_ON (1 << 8)
+# define NI_DIG_BE_DPSST 0
/* Display Port block */
+#define EVERGREEN_DP0_REGISTER_OFFSET (0x730C - 0x730C)
+#define EVERGREEN_DP1_REGISTER_OFFSET (0x7F0C - 0x730C)
+#define EVERGREEN_DP2_REGISTER_OFFSET (0x10B0C - 0x730C)
+#define EVERGREEN_DP3_REGISTER_OFFSET (0x1170C - 0x730C)
+#define EVERGREEN_DP4_REGISTER_OFFSET (0x1230C - 0x730C)
+#define EVERGREEN_DP5_REGISTER_OFFSET (0x12F0C - 0x730C)
+
+
+#define EVERGREEN_DP_VID_STREAM_CNTL 0x730C
+# define EVERGREEN_DP_VID_STREAM_CNTL_ENABLE (1 << 0)
+# define EVERGREEN_DP_VID_STREAM_STATUS (1 <<16)
+#define EVERGREEN_DP_STEER_FIFO 0x7310
+# define EVERGREEN_DP_STEER_FIFO_RESET (1 << 0)
#define EVERGREEN_DP_SEC_CNTL 0x7280
# define EVERGREEN_DP_SEC_STREAM_ENABLE (1 << 0)
# define EVERGREEN_DP_SEC_ASP_ENABLE (1 << 4)
# define EVERGREEN_DP_SEC_N_BASE_MULTIPLE(x) (((x) & 0xf) << 24)
# define EVERGREEN_DP_SEC_SS_EN (1 << 28)
+/*DCIO_UNIPHY block*/
+#define NI_DCIO_UNIPHY0_UNIPHY_TX_CONTROL1 (0x6600 -0x6600)
+#define NI_DCIO_UNIPHY1_UNIPHY_TX_CONTROL1 (0x6640 -0x6600)
+#define NI_DCIO_UNIPHY2_UNIPHY_TX_CONTROL1 (0x6680 - 0x6600)
+#define NI_DCIO_UNIPHY3_UNIPHY_TX_CONTROL1 (0x66C0 - 0x6600)
+#define NI_DCIO_UNIPHY4_UNIPHY_TX_CONTROL1 (0x6700 - 0x6600)
+#define NI_DCIO_UNIPHY5_UNIPHY_TX_CONTROL1 (0x6740 - 0x6600)
+
+#define NI_DCIO_UNIPHY0_PLL_CONTROL1 0x6618
+# define NI_DCIO_UNIPHY0_PLL_CONTROL1_ENABLE (1 << 0)
+
#endif
void ttm_bo_move_to_lru_tail(struct ttm_buffer_object *bo)
{
- struct ttm_bo_device *bdev = bo->bdev;
- struct ttm_mem_type_manager *man;
+ int put_count = 0;
lockdep_assert_held(&bo->resv->lock.base);
- if (bo->mem.placement & TTM_PL_FLAG_NO_EVICT) {
- list_del_init(&bo->swap);
- list_del_init(&bo->lru);
-
- } else {
- if (bo->ttm && !(bo->ttm->page_flags & TTM_PAGE_FLAG_SG))
- list_move_tail(&bo->swap, &bo->glob->swap_lru);
-
- man = &bdev->man[bo->mem.mem_type];
- list_move_tail(&bo->lru, &man->lru);
- }
+ put_count = ttm_bo_del_from_lru(bo);
+ ttm_bo_list_ref_sub(bo, put_count, true);
+ ttm_bo_add_to_lru(bo);
}
EXPORT_SYMBOL(ttm_bo_move_to_lru_tail);
return 0;
}
+static void virtio_gpu_crtc_atomic_flush(struct drm_crtc *crtc,
+ struct drm_crtc_state *old_state)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&crtc->dev->event_lock, flags);
+ if (crtc->state->event)
+ drm_crtc_send_vblank_event(crtc, crtc->state->event);
+ spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
+}
+
static const struct drm_crtc_helper_funcs virtio_gpu_crtc_helper_funcs = {
.enable = virtio_gpu_crtc_enable,
.disable = virtio_gpu_crtc_disable,
.mode_set_nofb = virtio_gpu_crtc_mode_set_nofb,
.atomic_check = virtio_gpu_crtc_atomic_check,
+ .atomic_flush = virtio_gpu_crtc_atomic_flush,
};
static void virtio_gpu_enc_mode_set(struct drm_encoder *encoder,
&vmw_cmd_dx_cid_check, true, false, true),
VMW_CMD_DEF(SVGA_3D_CMD_DX_DEFINE_QUERY, &vmw_cmd_dx_define_query,
true, false, true),
- VMW_CMD_DEF(SVGA_3D_CMD_DX_DESTROY_QUERY, &vmw_cmd_ok,
+ VMW_CMD_DEF(SVGA_3D_CMD_DX_DESTROY_QUERY, &vmw_cmd_dx_cid_check,
true, false, true),
VMW_CMD_DEF(SVGA_3D_CMD_DX_BIND_QUERY, &vmw_cmd_dx_bind_query,
true, false, true),
VMW_CMD_DEF(SVGA_3D_CMD_DX_SET_QUERY_OFFSET,
- &vmw_cmd_ok, true, false, true),
- VMW_CMD_DEF(SVGA_3D_CMD_DX_BEGIN_QUERY, &vmw_cmd_ok,
+ &vmw_cmd_dx_cid_check, true, false, true),
+ VMW_CMD_DEF(SVGA_3D_CMD_DX_BEGIN_QUERY, &vmw_cmd_dx_cid_check,
true, false, true),
- VMW_CMD_DEF(SVGA_3D_CMD_DX_END_QUERY, &vmw_cmd_ok,
+ VMW_CMD_DEF(SVGA_3D_CMD_DX_END_QUERY, &vmw_cmd_dx_cid_check,
true, false, true),
VMW_CMD_DEF(SVGA_3D_CMD_DX_READBACK_QUERY, &vmw_cmd_invalid,
true, false, true),
- VMW_CMD_DEF(SVGA_3D_CMD_DX_SET_PREDICATION, &vmw_cmd_invalid,
+ VMW_CMD_DEF(SVGA_3D_CMD_DX_SET_PREDICATION, &vmw_cmd_dx_cid_check,
true, false, true),
VMW_CMD_DEF(SVGA_3D_CMD_DX_SET_VIEWPORTS, &vmw_cmd_dx_cid_check,
true, false, true),
mode = old_mode;
old_mode = NULL;
} else if (!vmw_kms_validate_mode_vram(vmw_priv,
- mode->hdisplay *
- (var->bits_per_pixel + 7) / 8,
- mode->vdisplay)) {
+ mode->hdisplay *
+ DIV_ROUND_UP(var->bits_per_pixel, 8),
+ mode->vdisplay)) {
drm_mode_destroy(vmw_priv->dev, mode);
return -EINVAL;
}
goto err_register;
}
- pdev->dev.of_node = of_node;
pdev->dev.parent = dev;
ret = platform_device_add_data(pdev, ®->pdata,
platform_device_put(pdev);
goto err_register;
}
+
+ /*
+ * Set of_node only after calling platform_device_add. Otherwise
+ * the platform:imx-ipuv3-crtc modalias won't be used.
+ */
+ pdev->dev.of_node = of_node;
}
return 0;
#define USB_DEVICE_ID_CORSAIR_K90 0x1b02
#define USB_VENDOR_ID_CREATIVELABS 0x041e
+#define USB_DEVICE_ID_CREATIVE_SB_OMNI_SURROUND_51 0x322c
#define USB_DEVICE_ID_PRODIKEYS_PCMIDI 0x2801
#define USB_VENDOR_ID_CVTOUCH 0x1ff7
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_3AXIS_5BUTTON_STICK, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_AXIS_295, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_PIXART_USB_OPTICAL_MOUSE, HID_QUIRK_ALWAYS_POLL },
+ { USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_CREATIVE_SB_OMNI_SURROUND_51, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_WIIU, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_ELAN, HID_ANY_ID, HID_QUIRK_ALWAYS_POLL },
wacom->tool[idx] = wacom_intuos_get_tool_type(wacom->id[idx]);
+ wacom->shared->stylus_in_proximity = true;
return 1;
}
{ "Wacom Intuos PT M 2", 21600, 13500, 2047, 63,
INTUOSHT2, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
+static const struct wacom_features wacom_features_0x343 =
+ { "Wacom DTK1651", 34616, 19559, 1023, 0,
+ DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 4,
+ WACOM_DTU_OFFSET, WACOM_DTU_OFFSET };
static const struct wacom_features wacom_features_HID_ANY_ID =
{ "Wacom HID", .type = HID_GENERIC };
{ USB_DEVICE_WACOM(0x33C) },
{ USB_DEVICE_WACOM(0x33D) },
{ USB_DEVICE_WACOM(0x33E) },
+ { USB_DEVICE_WACOM(0x343) },
{ USB_DEVICE_WACOM(0x4001) },
{ USB_DEVICE_WACOM(0x4004) },
{ USB_DEVICE_WACOM(0x5000) },
* there is room for the producer to send the pending packet.
*/
-static bool hv_need_to_signal_on_read(u32 prev_write_sz,
- struct hv_ring_buffer_info *rbi)
+static bool hv_need_to_signal_on_read(struct hv_ring_buffer_info *rbi)
{
u32 cur_write_sz;
u32 r_size;
- u32 write_loc = rbi->ring_buffer->write_index;
+ u32 write_loc;
u32 read_loc = rbi->ring_buffer->read_index;
- u32 pending_sz = rbi->ring_buffer->pending_send_sz;
+ u32 pending_sz;
+ /*
+ * Issue a full memory barrier before making the signaling decision.
+ * Here is the reason for having this barrier:
+ * If the reading of the pend_sz (in this function)
+ * were to be reordered and read before we commit the new read
+ * index (in the calling function) we could
+ * have a problem. If the host were to set the pending_sz after we
+ * have sampled pending_sz and go to sleep before we commit the
+ * read index, we could miss sending the interrupt. Issue a full
+ * memory barrier to address this.
+ */
+ mb();
+
+ pending_sz = rbi->ring_buffer->pending_send_sz;
+ write_loc = rbi->ring_buffer->write_index;
/* If the other end is not blocked on write don't bother. */
if (pending_sz == 0)
return false;
cur_write_sz = write_loc >= read_loc ? r_size - (write_loc - read_loc) :
read_loc - write_loc;
- if ((prev_write_sz < pending_sz) && (cur_write_sz >= pending_sz))
+ if (cur_write_sz >= pending_sz)
return true;
return false;
/* Update the read index */
hv_set_next_read_location(inring_info, next_read_location);
- *signal = hv_need_to_signal_on_read(bytes_avail_towrite, inring_info);
+ *signal = hv_need_to_signal_on_read(inring_info);
return ret;
}
config I2C_XLP9XX
tristate "XLP9XX I2C support"
- depends on CPU_XLP || COMPILE_TEST
+ depends on CPU_XLP || ARCH_VULCAN || COMPILE_TEST
help
This driver enables support for the on-chip I2C interface of
- the Broadcom XLP9xx/XLP5xx MIPS processors.
+ the Broadcom XLP9xx/XLP5xx MIPS and Vulcan ARM64 processors.
This driver can also be built as a module. If so, the module will
be called i2c-xlp9xx.
cbd_t __iomem *rbase;
u_char *txbuf[CPM_MAXBD];
u_char *rxbuf[CPM_MAXBD];
- u32 txdma[CPM_MAXBD];
- u32 rxdma[CPM_MAXBD];
+ dma_addr_t txdma[CPM_MAXBD];
+ dma_addr_t rxdma[CPM_MAXBD];
};
static irqreturn_t cpm_i2c_interrupt(int irq, void *dev_id)
return -EIO;
}
- clk_prepare_enable(i2c->clk);
+ ret = clk_enable(i2c->clk);
+ if (ret)
+ return ret;
for (i = 0; i < num; i++, msgs++) {
stop = (i == num - 1);
}
out:
- clk_disable_unprepare(i2c->clk);
+ clk_disable(i2c->clk);
return ret;
}
return -ENOENT;
}
- clk_prepare_enable(i2c->clk);
+ ret = clk_prepare_enable(i2c->clk);
+ if (ret)
+ return ret;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
i2c->regs = devm_ioremap_resource(&pdev->dev, mem);
platform_set_drvdata(pdev, i2c);
+ clk_disable(i2c->clk);
+
+ return 0;
+
err_clk:
clk_disable_unprepare(i2c->clk);
return ret;
i2c_del_adapter(&i2c->adap);
+ clk_unprepare(i2c->clk);
+
return 0;
}
i2c->suspended = 1;
+ clk_unprepare(i2c->clk);
+
return 0;
}
struct exynos5_i2c *i2c = platform_get_drvdata(pdev);
int ret = 0;
- clk_prepare_enable(i2c->clk);
+ ret = clk_prepare_enable(i2c->clk);
+ if (ret)
+ return ret;
ret = exynos5_hsi2c_clock_setup(i2c);
if (ret) {
}
exynos5_i2c_init(i2c);
- clk_disable_unprepare(i2c->clk);
+ clk_disable(i2c->clk);
i2c->suspended = 0;
return 0;
/* PCI DIDs for the Intel SMBus Message Transport (SMT) Devices */
#define PCI_DEVICE_ID_INTEL_S1200_SMT0 0x0c59
#define PCI_DEVICE_ID_INTEL_S1200_SMT1 0x0c5a
+#define PCI_DEVICE_ID_INTEL_DNV_SMT 0x19ac
#define PCI_DEVICE_ID_INTEL_AVOTON_SMT 0x1f15
#define ISMT_DESC_ENTRIES 2 /* number of descriptor entries */
static const struct pci_device_id ismt_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT0) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_S1200_SMT1) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMT) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_AVOTON_SMT) },
{ 0, }
};
static const struct of_device_id rk3x_i2c_match[] = {
{ .compatible = "rockchip,rk3066-i2c", .data = (void *)&soc_data[0] },
{ .compatible = "rockchip,rk3188-i2c", .data = (void *)&soc_data[1] },
+ { .compatible = "rockchip,rk3228-i2c", .data = (void *)&soc_data[2] },
{ .compatible = "rockchip,rk3288-i2c", .data = (void *)&soc_data[2] },
{},
};
.enter = NULL }
};
+static struct cpuidle_state bxt_cstates[] = {
+ {
+ .name = "C1-BXT",
+ .desc = "MWAIT 0x00",
+ .flags = MWAIT2flg(0x00),
+ .exit_latency = 2,
+ .target_residency = 2,
+ .enter = &intel_idle,
+ .enter_freeze = intel_idle_freeze, },
+ {
+ .name = "C1E-BXT",
+ .desc = "MWAIT 0x01",
+ .flags = MWAIT2flg(0x01),
+ .exit_latency = 10,
+ .target_residency = 20,
+ .enter = &intel_idle,
+ .enter_freeze = intel_idle_freeze, },
+ {
+ .name = "C6-BXT",
+ .desc = "MWAIT 0x20",
+ .flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 133,
+ .target_residency = 133,
+ .enter = &intel_idle,
+ .enter_freeze = intel_idle_freeze, },
+ {
+ .name = "C7s-BXT",
+ .desc = "MWAIT 0x31",
+ .flags = MWAIT2flg(0x31) | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 155,
+ .target_residency = 155,
+ .enter = &intel_idle,
+ .enter_freeze = intel_idle_freeze, },
+ {
+ .name = "C8-BXT",
+ .desc = "MWAIT 0x40",
+ .flags = MWAIT2flg(0x40) | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 1000,
+ .target_residency = 1000,
+ .enter = &intel_idle,
+ .enter_freeze = intel_idle_freeze, },
+ {
+ .name = "C9-BXT",
+ .desc = "MWAIT 0x50",
+ .flags = MWAIT2flg(0x50) | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 2000,
+ .target_residency = 2000,
+ .enter = &intel_idle,
+ .enter_freeze = intel_idle_freeze, },
+ {
+ .name = "C10-BXT",
+ .desc = "MWAIT 0x60",
+ .flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
+ .exit_latency = 10000,
+ .target_residency = 10000,
+ .enter = &intel_idle,
+ .enter_freeze = intel_idle_freeze, },
+ {
+ .enter = NULL }
+};
+
/**
* intel_idle
* @dev: cpuidle_device
.state_table = knl_cstates,
};
+static const struct idle_cpu idle_cpu_bxt = {
+ .state_table = bxt_cstates,
+ .disable_promotion_to_c1e = true,
+};
+
#define ICPU(model, cpu) \
{ X86_VENDOR_INTEL, 6, model, X86_FEATURE_MWAIT, (unsigned long)&cpu }
ICPU(0x9e, idle_cpu_skl),
ICPU(0x55, idle_cpu_skx),
ICPU(0x57, idle_cpu_knl),
+ ICPU(0x5c, idle_cpu_bxt),
{}
};
MODULE_DEVICE_TABLE(x86cpu, intel_idle_ids);
/* else, 1 and 2 socket systems use default ivt_cstates */
}
+
+/*
+ * Translate IRTL (Interrupt Response Time Limit) MSR to usec
+ */
+
+static unsigned int irtl_ns_units[] = {
+ 1, 32, 1024, 32768, 1048576, 33554432, 0, 0 };
+
+static unsigned long long irtl_2_usec(unsigned long long irtl)
+{
+ unsigned long long ns;
+
+ ns = irtl_ns_units[(irtl >> 10) & 0x3];
+
+ return div64_u64((irtl & 0x3FF) * ns, 1000);
+}
+/*
+ * bxt_idle_state_table_update(void)
+ *
+ * On BXT, we trust the IRTL to show the definitive maximum latency
+ * We use the same value for target_residency.
+ */
+static void bxt_idle_state_table_update(void)
+{
+ unsigned long long msr;
+
+ rdmsrl(MSR_PKGC6_IRTL, msr);
+ if (msr) {
+ unsigned int usec = irtl_2_usec(msr);
+
+ bxt_cstates[2].exit_latency = usec;
+ bxt_cstates[2].target_residency = usec;
+ }
+
+ rdmsrl(MSR_PKGC7_IRTL, msr);
+ if (msr) {
+ unsigned int usec = irtl_2_usec(msr);
+
+ bxt_cstates[3].exit_latency = usec;
+ bxt_cstates[3].target_residency = usec;
+ }
+
+ rdmsrl(MSR_PKGC8_IRTL, msr);
+ if (msr) {
+ unsigned int usec = irtl_2_usec(msr);
+
+ bxt_cstates[4].exit_latency = usec;
+ bxt_cstates[4].target_residency = usec;
+ }
+
+ rdmsrl(MSR_PKGC9_IRTL, msr);
+ if (msr) {
+ unsigned int usec = irtl_2_usec(msr);
+
+ bxt_cstates[5].exit_latency = usec;
+ bxt_cstates[5].target_residency = usec;
+ }
+
+ rdmsrl(MSR_PKGC10_IRTL, msr);
+ if (msr) {
+ unsigned int usec = irtl_2_usec(msr);
+
+ bxt_cstates[6].exit_latency = usec;
+ bxt_cstates[6].target_residency = usec;
+ }
+
+}
/*
* sklh_idle_state_table_update(void)
*
case 0x3e: /* IVT */
ivt_idle_state_table_update();
break;
+ case 0x5c: /* BXT */
+ bxt_idle_state_table_update();
+ break;
case 0x5e: /* SKL-H */
sklh_idle_state_table_update();
break;
if (ret)
goto vref_disable;
+ platform_set_drvdata(pdev, indio_dev);
+
ret = iio_device_register(indio_dev);
if (ret < 0)
goto per_clk_disable_unprepare;
return 0;
}
+static const char *inv_mpu_match_acpi_device(struct device *dev, int *chip_id)
+{
+ const struct acpi_device_id *id;
+
+ id = acpi_match_device(dev->driver->acpi_match_table, dev);
+ if (!id)
+ return NULL;
+
+ *chip_id = (int)id->driver_data;
+
+ return dev_name(dev);
+}
+
/**
* inv_mpu_probe() - probe function.
* @client: i2c client.
const struct i2c_device_id *id)
{
struct inv_mpu6050_state *st;
- int result;
- const char *name = id ? id->name : NULL;
+ int result, chip_type;
struct regmap *regmap;
+ const char *name;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_I2C_BLOCK))
return -EOPNOTSUPP;
+ if (id) {
+ chip_type = (int)id->driver_data;
+ name = id->name;
+ } else if (ACPI_HANDLE(&client->dev)) {
+ name = inv_mpu_match_acpi_device(&client->dev, &chip_type);
+ if (!name)
+ return -ENODEV;
+ } else {
+ return -ENOSYS;
+ }
+
regmap = devm_regmap_init_i2c(client, &inv_mpu_regmap_config);
if (IS_ERR(regmap)) {
dev_err(&client->dev, "Failed to register i2c regmap %d\n",
}
result = inv_mpu_core_probe(regmap, client->irq, name,
- NULL, id->driver_data);
+ NULL, chip_type);
if (result < 0)
return result;
struct regmap *regmap;
const struct spi_device_id *id = spi_get_device_id(spi);
const char *name = id ? id->name : NULL;
+ const int chip_type = id ? id->driver_data : 0;
regmap = devm_regmap_init_spi(spi, &inv_mpu_regmap_config);
if (IS_ERR(regmap)) {
}
return inv_mpu_core_probe(regmap, spi->irq, name,
- inv_mpu_i2c_disable, id->driver_data);
+ inv_mpu_i2c_disable, chip_type);
}
static int inv_mpu_remove(struct spi_device *spi)
int rc;
int irq;
+ init_waitqueue_head(&data->data_ready_queue);
+ clear_bit(0, &data->flags);
if (client->irq)
irq = client->irq;
else
return rc;
}
- init_waitqueue_head(&data->data_ready_queue);
- clear_bit(0, &data->flags);
data->eoc_irq = irq;
return rc;
int eoc_gpio;
int err;
const char *name = NULL;
- enum asahi_compass_chipset chipset;
+ enum asahi_compass_chipset chipset = AK_MAX_TYPE;
/* Grab and set up the supplied GPIO. */
if (client->dev.platform_data)
NULL);
/* Coudn't find default GID location */
- WARN_ON(ix < 0);
+ if (WARN_ON(ix < 0))
+ goto release;
zattr_type.gid_type = gid_type;
#include <asm/uaccess.h>
+#include <rdma/ib.h>
#include <rdma/ib_cm.h>
#include <rdma/ib_user_cm.h>
#include <rdma/ib_marshall.h>
struct ib_ucm_cmd_hdr hdr;
ssize_t result;
+ if (WARN_ON_ONCE(!ib_safe_file_access(filp)))
+ return -EACCES;
+
if (len < sizeof(hdr))
return -EINVAL;
struct rdma_ucm_cmd_hdr hdr;
ssize_t ret;
+ if (WARN_ON_ONCE(!ib_safe_file_access(filp)))
+ return -EACCES;
+
if (len < sizeof(hdr))
return -EINVAL;
#include <asm/uaccess.h>
+#include <rdma/ib.h>
+
#include "uverbs.h"
MODULE_AUTHOR("Roland Dreier");
int srcu_key;
ssize_t ret;
+ if (WARN_ON_ONCE(!ib_safe_file_access(filp)))
+ return -EACCES;
+
if (count < sizeof hdr)
return -EINVAL;
void ib_drain_qp(struct ib_qp *qp)
{
ib_drain_sq(qp);
- ib_drain_rq(qp);
+ if (!qp->srq)
+ ib_drain_rq(qp);
}
EXPORT_SYMBOL(ib_drain_qp);
dev->ibdev.iwcm->add_ref = iwch_qp_add_ref;
dev->ibdev.iwcm->rem_ref = iwch_qp_rem_ref;
dev->ibdev.iwcm->get_qp = iwch_get_qp;
+ memcpy(dev->ibdev.iwcm->ifname, dev->rdev.t3cdev_p->lldev->name,
+ sizeof(dev->ibdev.iwcm->ifname));
ret = ib_register_device(&dev->ibdev, NULL);
if (ret)
cq->bar2_va = c4iw_bar2_addrs(rdev, cq->cqid, T4_BAR2_QTYPE_INGRESS,
&cq->bar2_qid,
user ? &cq->bar2_pa : NULL);
- if (user && !cq->bar2_va) {
+ if (user && !cq->bar2_pa) {
pr_warn(MOD "%s: cqid %u not in BAR2 range.\n",
pci_name(rdev->lldi.pdev), cq->cqid);
ret = -EINVAL;
dev->ibdev.iwcm->add_ref = c4iw_qp_add_ref;
dev->ibdev.iwcm->rem_ref = c4iw_qp_rem_ref;
dev->ibdev.iwcm->get_qp = c4iw_get_qp;
+ memcpy(dev->ibdev.iwcm->ifname, dev->rdev.lldi.ports[0]->name,
+ sizeof(dev->ibdev.iwcm->ifname));
ret = ib_register_device(&dev->ibdev, NULL);
if (ret)
if (pbar2_pa)
*pbar2_pa = (rdev->bar2_pa + bar2_qoffset) & PAGE_MASK;
+
+ if (is_t4(rdev->lldi.adapter_type))
+ return NULL;
+
return rdev->bar2_kva + bar2_qoffset;
}
/*
* User mode must have bar2 access.
*/
- if (user && (!wq->sq.bar2_va || !wq->rq.bar2_va)) {
+ if (user && (!wq->sq.bar2_pa || !wq->rq.bar2_pa)) {
pr_warn(MOD "%s: sqid %u or rqid %u not in BAR2 range.\n",
pci_name(rdev->lldi.pdev), wq->sq.qid, wq->rq.qid);
goto free_dma;
void c4iw_drain_sq(struct ib_qp *ibqp)
{
struct c4iw_qp *qp = to_c4iw_qp(ibqp);
+ unsigned long flag;
+ bool need_to_wait;
- wait_for_completion(&qp->sq_drained);
+ spin_lock_irqsave(&qp->lock, flag);
+ need_to_wait = !t4_sq_empty(&qp->wq);
+ spin_unlock_irqrestore(&qp->lock, flag);
+
+ if (need_to_wait)
+ wait_for_completion(&qp->sq_drained);
}
void c4iw_drain_rq(struct ib_qp *ibqp)
{
struct c4iw_qp *qp = to_c4iw_qp(ibqp);
+ unsigned long flag;
+ bool need_to_wait;
+
+ spin_lock_irqsave(&qp->lock, flag);
+ need_to_wait = !t4_rq_empty(&qp->wq);
+ spin_unlock_irqrestore(&qp->lock, flag);
- wait_for_completion(&qp->rq_drained);
+ if (need_to_wait)
+ wait_for_completion(&qp->rq_drained);
}
sizeof(struct mlx5_wqe_ctrl_seg)) /
sizeof(struct mlx5_wqe_data_seg);
props->max_sge = min(max_rq_sg, max_sq_sg);
- props->max_sge_rd = props->max_sge;
+ props->max_sge_rd = MLX5_MAX_SGE_RD;
props->max_cq = 1 << MLX5_CAP_GEN(mdev, log_max_cq);
props->max_cqe = (1 << MLX5_CAP_GEN(mdev, log_max_cq_sz)) - 1;
props->max_mr = 1 << MLX5_CAP_GEN(mdev, log_max_mkey);
struct mlx5_ib_dev *dev = to_mdev(ibdev);
struct mlx5_core_dev *mdev = dev->mdev;
struct mlx5_hca_vport_context *rep;
- int max_mtu;
- int oper_mtu;
+ u16 max_mtu;
+ u16 oper_mtu;
int err;
u8 ib_link_width_oper;
u8 vl_hw_cap;
* skb_shinfo(skb)->nr_frags, skb_is_gso(skb));
*/
- if (!netif_carrier_ok(netdev))
- return NETDEV_TX_OK;
-
if (netif_queue_stopped(netdev))
return NETDEV_TX_BUSY;
#include <linux/export.h>
#include <linux/uio.h>
+#include <rdma/ib.h>
+
#include "qib.h"
#include "qib_common.h"
#include "qib_user_sdma.h"
ssize_t ret = 0;
void *dest;
+ if (WARN_ON_ONCE(!ib_safe_file_access(fp)))
+ return -EACCES;
+
if (count < sizeof(cmd.type)) {
ret = -EINVAL;
goto bail;
spin_unlock_irqrestore(&qp->s_hlock, flags);
if (nreq) {
if (call_send)
- rdi->driver_f.schedule_send_no_lock(qp);
- else
rdi->driver_f.do_send(qp);
+ else
+ rdi->driver_f.schedule_send_no_lock(qp);
}
return err;
}
struct Scsi_Host *shost;
struct iser_conn *iser_conn = NULL;
struct ib_conn *ib_conn;
+ u32 max_fr_sectors;
u16 max_cmds;
shost = iscsi_host_alloc(&iscsi_iser_sht, 0, 0);
iser_conn = ep->dd_data;
max_cmds = iser_conn->max_cmds;
shost->sg_tablesize = iser_conn->scsi_sg_tablesize;
- shost->max_sectors = iser_conn->scsi_max_sectors;
mutex_lock(&iser_conn->state_mutex);
if (iser_conn->state != ISER_CONN_UP) {
*/
shost->sg_tablesize = min_t(unsigned short, shost->sg_tablesize,
ib_conn->device->ib_device->attrs.max_fast_reg_page_list_len);
- shost->max_sectors = min_t(unsigned int,
- 1024, (shost->sg_tablesize * PAGE_SIZE) >> 9);
if (iscsi_host_add(shost,
ib_conn->device->ib_device->dma_device)) {
goto free_host;
}
+ /*
+ * FRs or FMRs can only map up to a (device) page per entry, but if the
+ * first entry is misaligned we'll end up using using two entries
+ * (head and tail) for a single page worth data, so we have to drop
+ * one segment from the calculation.
+ */
+ max_fr_sectors = ((shost->sg_tablesize - 1) * PAGE_SIZE) >> 9;
+ shost->max_sectors = min(iser_max_sectors, max_fr_sectors);
+
if (cmds_max > max_cmds) {
iser_info("cmds_max changed from %u to %u\n",
cmds_max, max_cmds);
.queuecommand = iscsi_queuecommand,
.change_queue_depth = scsi_change_queue_depth,
.sg_tablesize = ISCSI_ISER_DEF_SG_TABLESIZE,
- .max_sectors = ISER_DEF_MAX_SECTORS,
.cmd_per_lun = ISER_DEF_CMD_PER_LUN,
.eh_abort_handler = iscsi_eh_abort,
.eh_device_reset_handler= iscsi_eh_device_reset,
{
struct vibra_info *info = container_of(work,
struct vibra_info, play_work);
+ int ret;
+
+ /* Do not allow effect, while the routing is set to use audio */
+ ret = twl6040_get_vibralr_status(info->twl6040);
+ if (ret & TWL6040_VIBSEL) {
+ dev_info(info->dev, "Vibra is configured for audio\n");
+ return;
+ }
mutex_lock(&info->mutex);
struct ff_effect *effect)
{
struct vibra_info *info = input_get_drvdata(input);
- int ret;
-
- /* Do not allow effect, while the routing is set to use audio */
- ret = twl6040_get_vibralr_status(info->twl6040);
- if (ret & TWL6040_VIBSEL) {
- dev_info(&input->dev, "Vibra is configured for audio\n");
- return -EBUSY;
- }
info->weak_speed = effect->u.rumble.weak_magnitude;
info->strong_speed = effect->u.rumble.strong_magnitude;
return 0;
}
+static int mxt_acquire_irq(struct mxt_data *data)
+{
+ int error;
+
+ enable_irq(data->irq);
+
+ error = mxt_process_messages_until_invalid(data);
+ if (error)
+ return error;
+
+ return 0;
+}
+
static int mxt_soft_reset(struct mxt_data *data)
{
struct device *dev = &data->client->dev;
/* Ignore CHG line for 100ms after reset */
msleep(100);
- enable_irq(data->irq);
+ mxt_acquire_irq(data);
ret = mxt_wait_for_completion(data, &data->reset_completion,
MXT_RESET_TIMEOUT);
return ret;
}
-static int mxt_acquire_irq(struct mxt_data *data)
-{
- int error;
-
- enable_irq(data->irq);
-
- error = mxt_process_messages_until_invalid(data);
- if (error)
- return error;
-
- return 0;
-}
-
static int mxt_get_info(struct mxt_data *data)
{
struct i2c_client *client = data->client;
point.coord_x = point.coord_y = 0;
}
- point.state = payload[9 * i + 5] & 0x03;
- point.id = (payload[9 * i + 5] & 0xfc) >> 2;
+ point.state = payload[9 * i + 5] & 0x0f;
+ point.id = (payload[9 * i + 5] & 0xf0) >> 4;
/* determine touch major, minor and orientation */
point.area_major = max(payload[9 * i + 6],
* go away inside make_request
*/
sectors = bio_sectors(bio);
+ /* bio could be mergeable after passing to underlayer */
+ bio->bi_rw &= ~REQ_NOMERGE;
mddev->pers->make_request(mddev, bio);
cpu = part_stat_lock();
(unsigned long long)zone_size>>1);
zone_start = conf->strip_zone[j].zone_end;
}
- printk(KERN_INFO "\n");
}
static int create_strip_zones(struct mddev *mddev, struct r0conf **private_conf)
struct r0conf *conf = kzalloc(sizeof(*conf), GFP_KERNEL);
unsigned short blksize = 512;
+ *private_conf = ERR_PTR(-ENOMEM);
if (!conf)
return -ENOMEM;
rdev_for_each(rdev1, mddev) {
dev = &sh->dev[i];
} else if (test_bit(R5_Discard, &dev->flags))
discard_pending = 1;
- WARN_ON(test_bit(R5_SkipCopy, &dev->flags));
- WARN_ON(dev->page != dev->orig_page);
}
r5l_stripe_write_finished(sh);
}
EXPORT_SYMBOL_GPL(media_device_find_devres);
+#if IS_ENABLED(CONFIG_PCI)
void media_device_pci_init(struct media_device *mdev,
struct pci_dev *pci_dev,
const char *name)
{
-#ifdef CONFIG_PCI
mdev->dev = &pci_dev->dev;
if (name)
mdev->driver_version = LINUX_VERSION_CODE;
media_device_init(mdev);
-#endif
}
EXPORT_SYMBOL_GPL(media_device_pci_init);
+#endif
+#if IS_ENABLED(CONFIG_USB)
void __media_device_usb_init(struct media_device *mdev,
struct usb_device *udev,
const char *board_name,
const char *driver_name)
{
-#ifdef CONFIG_USB
mdev->dev = &udev->dev;
if (driver_name)
mdev->driver_version = LINUX_VERSION_CODE;
media_device_init(mdev);
-#endif
}
EXPORT_SYMBOL_GPL(__media_device_usb_init);
+#endif
#endif /* CONFIG_MEDIA_CONTROLLER */
platform_set_drvdata(pdev, fmd);
- /* Protect the media graph while we're registering entities */
- mutex_lock(&fmd->media_dev.graph_mutex);
-
ret = fimc_md_register_platform_entities(fmd, dev->of_node);
- if (ret) {
- mutex_unlock(&fmd->media_dev.graph_mutex);
+ if (ret)
goto err_clk;
- }
ret = fimc_md_register_sensor_entities(fmd);
- if (ret) {
- mutex_unlock(&fmd->media_dev.graph_mutex);
+ if (ret)
goto err_m_ent;
- }
-
- mutex_unlock(&fmd->media_dev.graph_mutex);
ret = device_create_file(&pdev->dev, &dev_attr_subdev_conf_mode);
if (ret)
if (ret < 0)
goto err_sens;
- mutex_lock(&camif->media_dev.graph_mutex);
-
ret = v4l2_device_register_subdev_nodes(&camif->v4l2_dev);
if (ret < 0)
- goto err_unlock;
+ goto err_sens;
ret = camif_register_video_nodes(camif);
if (ret < 0)
- goto err_unlock;
+ goto err_sens;
ret = camif_create_media_links(camif);
if (ret < 0)
- goto err_unlock;
-
- mutex_unlock(&camif->media_dev.graph_mutex);
+ goto err_sens;
ret = media_device_register(&camif->media_dev);
if (ret < 0)
pm_runtime_put(dev);
return 0;
-err_unlock:
- mutex_unlock(&camif->media_dev.graph_mutex);
err_sens:
v4l2_device_unregister(&camif->v4l2_dev);
media_device_unregister(&camif->media_dev);
printk(KERN_INFO "%s: %s found\n", __func__,
usbvision_device_data[model].model_string);
- /*
- * this is a security check.
- * an exploit using an incorrect bInterfaceNumber is known
- */
- if (ifnum >= USB_MAXINTERFACES || !dev->actconfig->interface[ifnum])
- return -ENODEV;
-
if (usbvision_device_data[model].interface >= 0)
interface = &dev->actconfig->interface[usbvision_device_data[model].interface]->altsetting[0];
else if (ifnum < dev->actconfig->desc.bNumInterfaces)
* Will sleep if required for nonblocking == false.
*/
static int __vb2_get_done_vb(struct vb2_queue *q, struct vb2_buffer **vb,
- int nonblocking)
+ void *pb, int nonblocking)
{
unsigned long flags;
int ret;
/*
* Only remove the buffer from done_list if v4l2_buffer can handle all
* the planes.
- * Verifying planes is NOT necessary since it already has been checked
- * before the buffer is queued/prepared. So it can never fail.
*/
- list_del(&(*vb)->done_entry);
+ ret = call_bufop(q, verify_planes_array, *vb, pb);
+ if (!ret)
+ list_del(&(*vb)->done_entry);
spin_unlock_irqrestore(&q->done_lock, flags);
return ret;
struct vb2_buffer *vb = NULL;
int ret;
- ret = __vb2_get_done_vb(q, &vb, nonblocking);
+ ret = __vb2_get_done_vb(q, &vb, pb, nonblocking);
if (ret < 0)
return ret;
if (!vb2_is_streaming(q) || q->error)
return POLLERR;
+ /*
+ * If this quirk is set and QBUF hasn't been called yet then
+ * return POLLERR as well. This only affects capture queues, output
+ * queues will always initialize waiting_for_buffers to false.
+ * This quirk is set by V4L2 for backwards compatibility reasons.
+ */
+ if (q->quirk_poll_must_check_waiting_for_buffers &&
+ q->waiting_for_buffers && (req_events & (POLLIN | POLLRDNORM)))
+ return POLLERR;
+
/*
* For output streams you can call write() as long as there are fewer
* buffers queued than there are buffers available.
vec = frame_vector_create(nr);
if (!vec)
return ERR_PTR(-ENOMEM);
- ret = get_vaddr_frames(start, nr, write, 1, vec);
+ ret = get_vaddr_frames(start & PAGE_MASK, nr, write, true, vec);
if (ret < 0)
goto out_destroy;
/* We accept only complete set of PFNs */
return 0;
}
+static int __verify_planes_array_core(struct vb2_buffer *vb, const void *pb)
+{
+ return __verify_planes_array(vb, pb);
+}
+
/**
* __verify_length() - Verify that the bytesused value for each plane fits in
* the plane length and that the data offset doesn't exceed the bytesused value.
}
static const struct vb2_buf_ops v4l2_buf_ops = {
+ .verify_planes_array = __verify_planes_array_core,
.fill_user_buffer = __fill_v4l2_buffer,
.fill_vb2_buffer = __fill_vb2_buffer,
.copy_timestamp = __copy_timestamp,
q->is_output = V4L2_TYPE_IS_OUTPUT(q->type);
q->copy_timestamp = (q->timestamp_flags & V4L2_BUF_FLAG_TIMESTAMP_MASK)
== V4L2_BUF_FLAG_TIMESTAMP_COPY;
+ /*
+ * For compatibility with vb1: if QBUF hasn't been called yet, then
+ * return POLLERR as well. This only affects capture queues, output
+ * queues will always initialize waiting_for_buffers to false.
+ */
+ q->quirk_poll_must_check_waiting_for_buffers = true;
return vb2_core_queue_init(q);
}
poll_wait(file, &fh->wait, wait);
}
- /*
- * For compatibility with vb1: if QBUF hasn't been called yet, then
- * return POLLERR as well. This only affects capture queues, output
- * queues will always initialize waiting_for_buffers to false.
- */
- if (q->waiting_for_buffers && (req_events & (POLLIN | POLLRDNORM)))
- return POLLERR;
-
return res | vb2_core_poll(q, file, wait);
}
EXPORT_SYMBOL_GPL(vb2_poll);
cxl_ops->link_ok(ctx->afu->adapter, ctx->afu));
flush_work(&ctx->fault_work); /* Only needed for dedicated process */
+ /*
+ * Wait until no further interrupts are presented by the PSL
+ * for this context.
+ */
+ if (cxl_ops->irq_wait)
+ cxl_ops->irq_wait(ctx);
+
/* release the reference to the group leader and mm handling pid */
put_pid(ctx->pid);
put_pid(ctx->glpid);
#define CXL_PSL_DSISR_An_PE (1ull << (63-4)) /* PSL Error (implementation specific) */
#define CXL_PSL_DSISR_An_AE (1ull << (63-5)) /* AFU Error */
#define CXL_PSL_DSISR_An_OC (1ull << (63-6)) /* OS Context Warning */
+#define CXL_PSL_DSISR_PENDING (CXL_PSL_DSISR_TRANS | CXL_PSL_DSISR_An_PE | CXL_PSL_DSISR_An_AE | CXL_PSL_DSISR_An_OC)
/* NOTE: Bits 32:63 are undefined if DSISR[DS] = 1 */
#define CXL_PSL_DSISR_An_M DSISR_NOHPTE /* PTE not found */
#define CXL_PSL_DSISR_An_P DSISR_PROTFAULT /* Storage protection violation */
u64 dsisr, u64 errstat);
irqreturn_t (*psl_interrupt)(int irq, void *data);
int (*ack_irq)(struct cxl_context *ctx, u64 tfc, u64 psl_reset_mask);
+ void (*irq_wait)(struct cxl_context *ctx);
int (*attach_process)(struct cxl_context *ctx, bool kernel,
u64 wed, u64 amr);
int (*detach_process)(struct cxl_context *ctx);
void cxl_unmap_irq(unsigned int virq, void *cookie)
{
free_irq(virq, cookie);
- irq_dispose_mapping(virq);
}
int cxl_register_one_irq(struct cxl *adapter,
#include <linux/mutex.h>
#include <linux/mm.h>
#include <linux/uaccess.h>
+#include <linux/delay.h>
#include <asm/synch.h>
#include <misc/cxl-base.h>
return fail_psl_irq(afu, &irq_info);
}
+void native_irq_wait(struct cxl_context *ctx)
+{
+ u64 dsisr;
+ int timeout = 1000;
+ int ph;
+
+ /*
+ * Wait until no further interrupts are presented by the PSL
+ * for this context.
+ */
+ while (timeout--) {
+ ph = cxl_p2n_read(ctx->afu, CXL_PSL_PEHandle_An) & 0xffff;
+ if (ph != ctx->pe)
+ return;
+ dsisr = cxl_p2n_read(ctx->afu, CXL_PSL_DSISR_An);
+ if ((dsisr & CXL_PSL_DSISR_PENDING) == 0)
+ return;
+ /*
+ * We are waiting for the workqueue to process our
+ * irq, so need to let that run here.
+ */
+ msleep(1);
+ }
+
+ dev_warn(&ctx->afu->dev, "WARNING: waiting on DSI for PE %i"
+ " DSISR %016llx!\n", ph, dsisr);
+ return;
+}
+
static irqreturn_t native_slice_irq_err(int irq, void *data)
{
struct cxl_afu *afu = data;
.handle_psl_slice_error = native_handle_psl_slice_error,
.psl_interrupt = NULL,
.ack_irq = native_ack_irq,
+ .irq_wait = native_irq_wait,
.attach_process = native_attach_process,
.detach_process = native_detach_process,
.support_attributes = native_support_attributes,
ret = -EFAULT;
goto free_ret;
}
+ /* Ensure desc has not changed between the two reads */
+ if (memcmp(&dd, dd_config, sizeof(dd))) {
+ ret = -EINVAL;
+ goto free_ret;
+ }
mutex_lock(&vdev->vdev_mutex);
mutex_lock(&vi->vop_mutex);
ret = vop_virtio_add_device(vdev, dd_config);
config MMC_SDHCI_ACPI
tristate "SDHCI support for ACPI enumerated SDHCI controllers"
depends on MMC_SDHCI && ACPI
+ select IOSF_MBI if X86
help
This selects support for ACPI enumerated SDHCI controllers,
identified by ACPI Compatibility ID PNP0D40 or specific
#include <linux/mmc/pm.h>
#include <linux/mmc/slot-gpio.h>
+#ifdef CONFIG_X86
+#include <asm/cpu_device_id.h>
+#include <asm/iosf_mbi.h>
+#endif
+
#include "sdhci.h"
enum {
.ops = &sdhci_acpi_ops_int,
};
+#ifdef CONFIG_X86
+
+static bool sdhci_acpi_byt(void)
+{
+ static const struct x86_cpu_id byt[] = {
+ { X86_VENDOR_INTEL, 6, 0x37 },
+ {}
+ };
+
+ return x86_match_cpu(byt);
+}
+
+#define BYT_IOSF_SCCEP 0x63
+#define BYT_IOSF_OCP_NETCTRL0 0x1078
+#define BYT_IOSF_OCP_TIMEOUT_BASE GENMASK(10, 8)
+
+static void sdhci_acpi_byt_setting(struct device *dev)
+{
+ u32 val = 0;
+
+ if (!sdhci_acpi_byt())
+ return;
+
+ if (iosf_mbi_read(BYT_IOSF_SCCEP, MBI_CR_READ, BYT_IOSF_OCP_NETCTRL0,
+ &val)) {
+ dev_err(dev, "%s read error\n", __func__);
+ return;
+ }
+
+ if (!(val & BYT_IOSF_OCP_TIMEOUT_BASE))
+ return;
+
+ val &= ~BYT_IOSF_OCP_TIMEOUT_BASE;
+
+ if (iosf_mbi_write(BYT_IOSF_SCCEP, MBI_CR_WRITE, BYT_IOSF_OCP_NETCTRL0,
+ val)) {
+ dev_err(dev, "%s write error\n", __func__);
+ return;
+ }
+
+ dev_dbg(dev, "%s completed\n", __func__);
+}
+
+static bool sdhci_acpi_byt_defer(struct device *dev)
+{
+ if (!sdhci_acpi_byt())
+ return false;
+
+ if (!iosf_mbi_available())
+ return true;
+
+ sdhci_acpi_byt_setting(dev);
+
+ return false;
+}
+
+#else
+
+static inline void sdhci_acpi_byt_setting(struct device *dev)
+{
+}
+
+static inline bool sdhci_acpi_byt_defer(struct device *dev)
+{
+ return false;
+}
+
+#endif
+
static int bxt_get_cd(struct mmc_host *mmc)
{
int gpio_cd = mmc_gpio_get_cd(mmc);
if (acpi_bus_get_status(device) || !device->status.present)
return -ENODEV;
+ if (sdhci_acpi_byt_defer(dev))
+ return -EPROBE_DEFER;
+
hid = acpi_device_hid(device);
uid = device->pnp.unique_id;
{
struct sdhci_acpi_host *c = dev_get_drvdata(dev);
+ sdhci_acpi_byt_setting(&c->pdev->dev);
+
return sdhci_resume_host(c->host);
}
{
struct sdhci_acpi_host *c = dev_get_drvdata(dev);
+ sdhci_acpi_byt_setting(&c->pdev->dev);
+
return sdhci_runtime_resume_host(c->host);
}
MMC_CAP_1_8V_DDR |
MMC_CAP_ERASE | MMC_CAP_SDIO_IRQ;
+ /* TODO MMC DDR is not working on A80 */
+ if (of_device_is_compatible(pdev->dev.of_node,
+ "allwinner,sun9i-a80-mmc"))
+ mmc->caps &= ~MMC_CAP_1_8V_DDR;
+
ret = mmc_of_parse(mmc);
if (ret)
goto error_free_dma;
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/pm.h>
+#include <linux/pm_runtime.h>
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
this device is consigned into oblivion) with a configurable IP
address. It is most commonly used in order to make your currently
inactive SLIP address seem like a real address for local programs.
- If you use SLIP or PPP, you might want to say Y here. Since this
- thing often comes in handy, the default is Y. It won't enlarge your
- kernel either. What a deal. Read about it in the Network
+ If you use SLIP or PPP, you might want to say Y here. It won't
+ enlarge your kernel. What a deal. Read about it in the Network
Administrator's Guide, available from
<http://www.tldp.org/docs.html#guide>.
struct net_device *bridge)
{
struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
- int i, err;
+ int i, err = 0;
mutex_lock(&ps->smi_mutex);
struct page *page;
dma_addr_t mapping;
u16 sw_prod = rxr->rx_sw_agg_prod;
+ unsigned int offset = 0;
- page = alloc_page(gfp);
- if (!page)
- return -ENOMEM;
+ if (PAGE_SIZE > BNXT_RX_PAGE_SIZE) {
+ page = rxr->rx_page;
+ if (!page) {
+ page = alloc_page(gfp);
+ if (!page)
+ return -ENOMEM;
+ rxr->rx_page = page;
+ rxr->rx_page_offset = 0;
+ }
+ offset = rxr->rx_page_offset;
+ rxr->rx_page_offset += BNXT_RX_PAGE_SIZE;
+ if (rxr->rx_page_offset == PAGE_SIZE)
+ rxr->rx_page = NULL;
+ else
+ get_page(page);
+ } else {
+ page = alloc_page(gfp);
+ if (!page)
+ return -ENOMEM;
+ }
- mapping = dma_map_page(&pdev->dev, page, 0, PAGE_SIZE,
+ mapping = dma_map_page(&pdev->dev, page, offset, BNXT_RX_PAGE_SIZE,
PCI_DMA_FROMDEVICE);
if (dma_mapping_error(&pdev->dev, mapping)) {
__free_page(page);
rxr->rx_sw_agg_prod = NEXT_RX_AGG(sw_prod);
rx_agg_buf->page = page;
+ rx_agg_buf->offset = offset;
rx_agg_buf->mapping = mapping;
rxbd->rx_bd_haddr = cpu_to_le64(mapping);
rxbd->rx_bd_opaque = sw_prod;
page = cons_rx_buf->page;
cons_rx_buf->page = NULL;
prod_rx_buf->page = page;
+ prod_rx_buf->offset = cons_rx_buf->offset;
prod_rx_buf->mapping = cons_rx_buf->mapping;
RX_AGG_CMP_LEN) >> RX_AGG_CMP_LEN_SHIFT;
cons_rx_buf = &rxr->rx_agg_ring[cons];
- skb_fill_page_desc(skb, i, cons_rx_buf->page, 0, frag_len);
+ skb_fill_page_desc(skb, i, cons_rx_buf->page,
+ cons_rx_buf->offset, frag_len);
__clear_bit(cons, rxr->rx_agg_bmap);
/* It is possible for bnxt_alloc_rx_page() to allocate
return NULL;
}
- dma_unmap_page(&pdev->dev, mapping, PAGE_SIZE,
+ dma_unmap_page(&pdev->dev, mapping, BNXT_RX_PAGE_SIZE,
PCI_DMA_FROMDEVICE);
skb->data_len += frag_len;
dma_unmap_page(&pdev->dev,
dma_unmap_addr(rx_agg_buf, mapping),
- PAGE_SIZE, PCI_DMA_FROMDEVICE);
+ BNXT_RX_PAGE_SIZE, PCI_DMA_FROMDEVICE);
rx_agg_buf->page = NULL;
__clear_bit(j, rxr->rx_agg_bmap);
__free_page(page);
}
+ if (rxr->rx_page) {
+ __free_page(rxr->rx_page);
+ rxr->rx_page = NULL;
+ }
}
}
if (!(bp->flags & BNXT_FLAG_AGG_RINGS))
return 0;
- type = ((u32)PAGE_SIZE << RX_BD_LEN_SHIFT) |
+ type = ((u32)BNXT_RX_PAGE_SIZE << RX_BD_LEN_SHIFT) |
RX_BD_TYPE_RX_AGG_BD | RX_BD_FLAGS_SOP;
bnxt_init_rxbd_pages(ring, type);
bp->rx_agg_nr_pages = 0;
if (bp->flags & BNXT_FLAG_TPA)
- agg_factor = 4;
+ agg_factor = min_t(u32, 4, 65536 / BNXT_RX_PAGE_SIZE);
bp->flags &= ~BNXT_FLAG_JUMBO;
if (rx_space > PAGE_SIZE) {
/* Number of segs are log2 units, and first packet is not
* included as part of this units.
*/
- if (mss <= PAGE_SIZE) {
- n = PAGE_SIZE / mss;
+ if (mss <= BNXT_RX_PAGE_SIZE) {
+ n = BNXT_RX_PAGE_SIZE / mss;
nsegs = (MAX_SKB_FRAGS - 1) * n;
} else {
- n = mss / PAGE_SIZE;
- if (mss & (PAGE_SIZE - 1))
+ n = mss / BNXT_RX_PAGE_SIZE;
+ if (mss & (BNXT_RX_PAGE_SIZE - 1))
n++;
nsegs = (MAX_SKB_FRAGS - n) / n;
}
if (bp->flags & BNXT_FLAG_MSIX_CAP)
rc = bnxt_setup_msix(bp);
- if (!(bp->flags & BNXT_FLAG_USING_MSIX)) {
+ if (!(bp->flags & BNXT_FLAG_USING_MSIX) && BNXT_PF(bp)) {
/* fallback to INTA */
rc = bnxt_setup_inta(bp);
}
#define BNXT_PAGE_SIZE (1 << BNXT_PAGE_SHIFT)
+/* The RXBD length is 16-bit so we can only support page sizes < 64K */
+#if (PAGE_SHIFT > 15)
+#define BNXT_RX_PAGE_SHIFT 15
+#else
+#define BNXT_RX_PAGE_SHIFT PAGE_SHIFT
+#endif
+
+#define BNXT_RX_PAGE_SIZE (1 << BNXT_RX_PAGE_SHIFT)
+
#define BNXT_MIN_PKT_SIZE 45
#define BNXT_NUM_TESTS(bp) 0
struct bnxt_sw_rx_agg_bd {
struct page *page;
+ unsigned int offset;
dma_addr_t mapping;
};
unsigned long *rx_agg_bmap;
u16 rx_agg_bmap_size;
+ struct page *rx_page;
+ unsigned int rx_page_offset;
+
dma_addr_t rx_desc_mapping[MAX_RX_PAGES];
dma_addr_t rx_agg_desc_mapping[MAX_RX_AGG_PAGES];
snprintf(bp->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x",
bp->pdev->name, bp->pdev->id);
bp->mii_bus->priv = bp;
- bp->mii_bus->parent = &bp->dev->dev;
+ bp->mii_bus->parent = &bp->pdev->dev;
pdata = dev_get_platdata(&bp->pdev->dev);
dev_set_drvdata(&bp->dev->dev, bp->mii_bus);
struct phy_device *phydev;
phydev = mdiobus_scan(bp->mii_bus, i);
- if (IS_ERR(phydev)) {
+ if (IS_ERR(phydev) &&
+ PTR_ERR(phydev) != -ENODEV) {
err = PTR_ERR(phydev);
break;
}
if (err)
goto err_out_free_netdev;
+ err = macb_mii_init(bp);
+ if (err)
+ goto err_out_free_netdev;
+
+ phydev = bp->phy_dev;
+
+ netif_carrier_off(dev);
+
err = register_netdev(dev);
if (err) {
dev_err(&pdev->dev, "Cannot register net device, aborting.\n");
- goto err_out_unregister_netdev;
+ goto err_out_unregister_mdio;
}
- err = macb_mii_init(bp);
- if (err)
- goto err_out_unregister_netdev;
-
- netif_carrier_off(dev);
+ phy_attached_info(phydev);
netdev_info(dev, "Cadence %s rev 0x%08x at 0x%08lx irq %d (%pM)\n",
macb_is_gem(bp) ? "GEM" : "MACB", macb_readl(bp, MID),
dev->base_addr, dev->irq, dev->dev_addr);
- phydev = bp->phy_dev;
- phy_attached_info(phydev);
-
return 0;
-err_out_unregister_netdev:
- unregister_netdev(dev);
+err_out_unregister_mdio:
+ phy_disconnect(bp->phy_dev);
+ mdiobus_unregister(bp->mii_bus);
+ mdiobus_free(bp->mii_bus);
+
+ /* Shutdown the PHY if there is a GPIO reset */
+ if (bp->reset_gpio)
+ gpiod_set_value(bp->reset_gpio, 0);
err_out_free_netdev:
free_netdev(dev);
unsigned int nq0 = adap2pinfo(adap, 0)->nqsets;
unsigned int nq1 = adap->port[1] ? adap2pinfo(adap, 1)->nqsets : 1;
u8 cpus[SGE_QSETS + 1];
- u16 rspq_map[RSS_TABLE_SIZE];
+ u16 rspq_map[RSS_TABLE_SIZE + 1];
for (i = 0; i < SGE_QSETS; ++i)
cpus[i] = i;
rspq_map[i] = i % nq0;
rspq_map[i + RSS_TABLE_SIZE / 2] = (i % nq1) + nq0;
}
+ rspq_map[RSS_TABLE_SIZE] = 0xffff; /* terminator */
t3_config_rss(adap, F_RQFEEDBACKENABLE | F_TNLLKPEN | F_TNLMAPEN |
F_TNLPRTEN | F_TNL2TUPEN | F_TNL4TUPEN |
/* Enable per-CPU interrupts on the CPU that is
* brought up.
*/
- smp_call_function_single(cpu, mvneta_percpu_enable,
- pp, true);
+ mvneta_percpu_enable(pp);
/* Enable per-CPU interrupt on the one CPU we care
* about.
/* Disable per-CPU interrupts on the CPU that is
* brought down.
*/
- smp_call_function_single(cpu, mvneta_percpu_disable,
- pp, true);
+ mvneta_percpu_disable(pp);
break;
case CPU_DEAD:
return 0;
pep->phy = mdiobus_scan(pep->smi_bus, pep->phy_addr);
+ if (IS_ERR(pep->phy))
+ return PTR_ERR(pep->phy);
if (!pep->phy)
return -ENODEV;
u32 packets = 0;
u32 bytes = 0;
int factor = priv->cqe_factor;
- u64 timestamp = 0;
int done = 0;
int budget = priv->tx_work_limit;
u32 last_nr_txbb;
new_index = be16_to_cpu(cqe->wqe_index) & size_mask;
do {
+ u64 timestamp = 0;
+
txbbs_skipped += last_nr_txbb;
ring_index = (ring_index + last_nr_txbb) & size_mask;
- if (ring->tx_info[ring_index].ts_requested)
+
+ if (unlikely(ring->tx_info[ring_index].ts_requested))
timestamp = mlx4_en_get_cqe_ts(cqe);
/* free next descriptor */
bool "Mellanox Technologies ConnectX-4 Ethernet support"
depends on NETDEVICES && ETHERNET && PCI && MLX5_CORE
select PTP_1588_CLOCK
+ select VXLAN if MLX5_CORE=y
default n
---help---
Ethernet support in Mellanox Technologies ConnectX-4 NIC.
struct mlx5e_vxlan_db vxlan;
struct mlx5e_params params;
+ struct workqueue_struct *wq;
struct work_struct update_carrier_work;
struct work_struct set_rx_mode_work;
struct delayed_work update_stats_work;
MLX5E_100GBASE_KR4 = 22,
MLX5E_100GBASE_LR4 = 23,
MLX5E_100BASE_TX = 24,
- MLX5E_100BASE_T = 25,
+ MLX5E_1000BASE_T = 25,
MLX5E_10GBASE_T = 26,
MLX5E_25GBASE_CR = 27,
MLX5E_25GBASE_KR = 28,
[MLX5E_100BASE_TX] = {
.speed = 100,
},
- [MLX5E_100BASE_T] = {
- .supported = SUPPORTED_100baseT_Full,
- .advertised = ADVERTISED_100baseT_Full,
- .speed = 100,
+ [MLX5E_1000BASE_T] = {
+ .supported = SUPPORTED_1000baseT_Full,
+ .advertised = ADVERTISED_1000baseT_Full,
+ .speed = 1000,
},
[MLX5E_10GBASE_T] = {
.supported = SUPPORTED_10000baseT_Full,
mutex_lock(&priv->state_lock);
if (test_bit(MLX5E_STATE_OPENED, &priv->state)) {
mlx5e_update_stats(priv);
- schedule_delayed_work(dwork,
- msecs_to_jiffies(
- MLX5E_UPDATE_STATS_INTERVAL));
+ queue_delayed_work(priv->wq, dwork,
+ msecs_to_jiffies(MLX5E_UPDATE_STATS_INTERVAL));
}
mutex_unlock(&priv->state_lock);
}
switch (event) {
case MLX5_DEV_EVENT_PORT_UP:
case MLX5_DEV_EVENT_PORT_DOWN:
- schedule_work(&priv->update_carrier_work);
+ queue_work(priv->wq, &priv->update_carrier_work);
break;
default:
return 0;
}
-static int mlx5e_set_dev_port_mtu(struct net_device *netdev)
+static int mlx5e_set_mtu(struct mlx5e_priv *priv, u16 mtu)
{
- struct mlx5e_priv *priv = netdev_priv(netdev);
struct mlx5_core_dev *mdev = priv->mdev;
- int hw_mtu;
+ u16 hw_mtu = MLX5E_SW2HW_MTU(mtu);
int err;
- err = mlx5_set_port_mtu(mdev, MLX5E_SW2HW_MTU(netdev->mtu), 1);
+ err = mlx5_set_port_mtu(mdev, hw_mtu, 1);
if (err)
return err;
- mlx5_query_port_oper_mtu(mdev, &hw_mtu, 1);
+ /* Update vport context MTU */
+ mlx5_modify_nic_vport_mtu(mdev, hw_mtu);
+ return 0;
+}
+
+static void mlx5e_query_mtu(struct mlx5e_priv *priv, u16 *mtu)
+{
+ struct mlx5_core_dev *mdev = priv->mdev;
+ u16 hw_mtu = 0;
+ int err;
- if (MLX5E_HW2SW_MTU(hw_mtu) != netdev->mtu)
- netdev_warn(netdev, "%s: Port MTU %d is different than netdev mtu %d\n",
- __func__, MLX5E_HW2SW_MTU(hw_mtu), netdev->mtu);
+ err = mlx5_query_nic_vport_mtu(mdev, &hw_mtu);
+ if (err || !hw_mtu) /* fallback to port oper mtu */
+ mlx5_query_port_oper_mtu(mdev, &hw_mtu, 1);
+
+ *mtu = MLX5E_HW2SW_MTU(hw_mtu);
+}
+
+static int mlx5e_set_dev_port_mtu(struct net_device *netdev)
+{
+ struct mlx5e_priv *priv = netdev_priv(netdev);
+ u16 mtu;
+ int err;
- netdev->mtu = MLX5E_HW2SW_MTU(hw_mtu);
+ err = mlx5e_set_mtu(priv, netdev->mtu);
+ if (err)
+ return err;
+
+ mlx5e_query_mtu(priv, &mtu);
+ if (mtu != netdev->mtu)
+ netdev_warn(netdev, "%s: VPort MTU %d is different than netdev mtu %d\n",
+ __func__, mtu, netdev->mtu);
+
+ netdev->mtu = mtu;
return 0;
}
mlx5e_update_carrier(priv);
mlx5e_timestamp_init(priv);
- schedule_delayed_work(&priv->update_stats_work, 0);
+ queue_delayed_work(priv->wq, &priv->update_stats_work, 0);
return 0;
{
struct mlx5e_priv *priv = netdev_priv(dev);
- schedule_work(&priv->set_rx_mode_work);
+ queue_work(priv->wq, &priv->set_rx_mode_work);
}
static int mlx5e_set_mac(struct net_device *netdev, void *addr)
ether_addr_copy(netdev->dev_addr, saddr->sa_data);
netif_addr_unlock_bh(netdev);
- schedule_work(&priv->set_rx_mode_work);
+ queue_work(priv->wq, &priv->set_rx_mode_work);
return 0;
}
return err;
}
+#define MXL5_HW_MIN_MTU 64
+#define MXL5E_MIN_MTU (MXL5_HW_MIN_MTU + ETH_FCS_LEN)
+
static int mlx5e_change_mtu(struct net_device *netdev, int new_mtu)
{
struct mlx5e_priv *priv = netdev_priv(netdev);
struct mlx5_core_dev *mdev = priv->mdev;
bool was_opened;
- int max_mtu;
+ u16 max_mtu;
+ u16 min_mtu;
int err = 0;
mlx5_query_port_max_mtu(mdev, &max_mtu, 1);
max_mtu = MLX5E_HW2SW_MTU(max_mtu);
+ min_mtu = MLX5E_HW2SW_MTU(MXL5E_MIN_MTU);
- if (new_mtu > max_mtu) {
+ if (new_mtu > max_mtu || new_mtu < min_mtu) {
netdev_err(netdev,
- "%s: Bad MTU (%d) > (%d) Max\n",
- __func__, new_mtu, max_mtu);
+ "%s: Bad MTU (%d), valid range is: [%d..%d]\n",
+ __func__, new_mtu, min_mtu, max_mtu);
return -EINVAL;
}
if (!mlx5e_vxlan_allowed(priv->mdev))
return;
- mlx5e_vxlan_add_port(priv, be16_to_cpu(port));
+ mlx5e_vxlan_queue_work(priv, sa_family, be16_to_cpu(port), 1);
}
static void mlx5e_del_vxlan_port(struct net_device *netdev,
if (!mlx5e_vxlan_allowed(priv->mdev))
return;
- mlx5e_vxlan_del_port(priv, be16_to_cpu(port));
+ mlx5e_vxlan_queue_work(priv, sa_family, be16_to_cpu(port), 0);
}
static netdev_features_t mlx5e_vxlan_features_check(struct mlx5e_priv *priv,
priv = netdev_priv(netdev);
+ priv->wq = create_singlethread_workqueue("mlx5e");
+ if (!priv->wq)
+ goto err_free_netdev;
+
err = mlx5_alloc_map_uar(mdev, &priv->cq_uar, false);
if (err) {
mlx5_core_err(mdev, "alloc_map uar failed, %d\n", err);
- goto err_free_netdev;
+ goto err_destroy_wq;
}
err = mlx5_core_alloc_pd(mdev, &priv->pdn);
vxlan_get_rx_port(netdev);
mlx5e_enable_async_events(priv);
- schedule_work(&priv->set_rx_mode_work);
+ queue_work(priv->wq, &priv->set_rx_mode_work);
return priv;
err_unmap_free_uar:
mlx5_unmap_free_uar(mdev, &priv->cq_uar);
+err_destroy_wq:
+ destroy_workqueue(priv->wq);
+
err_free_netdev:
free_netdev(netdev);
set_bit(MLX5E_STATE_DESTROYING, &priv->state);
- schedule_work(&priv->set_rx_mode_work);
+ queue_work(priv->wq, &priv->set_rx_mode_work);
mlx5e_disable_async_events(priv);
- flush_scheduled_work();
- unregister_netdev(netdev);
+ flush_workqueue(priv->wq);
+ if (test_bit(MLX5_INTERFACE_STATE_SHUTDOWN, &mdev->intf_state)) {
+ netif_device_detach(netdev);
+ mutex_lock(&priv->state_lock);
+ if (test_bit(MLX5E_STATE_OPENED, &priv->state))
+ mlx5e_close_locked(netdev);
+ mutex_unlock(&priv->state_lock);
+ } else {
+ unregister_netdev(netdev);
+ }
+
mlx5e_tc_cleanup(priv);
mlx5e_vxlan_cleanup(priv);
mlx5e_destroy_flow_tables(priv);
mlx5_core_dealloc_transport_domain(priv->mdev, priv->tdn);
mlx5_core_dealloc_pd(priv->mdev, priv->pdn);
mlx5_unmap_free_uar(priv->mdev, &priv->cq_uar);
- free_netdev(netdev);
+ cancel_delayed_work_sync(&priv->update_stats_work);
+ destroy_workqueue(priv->wq);
+
+ if (!test_bit(MLX5_INTERFACE_STATE_SHUTDOWN, &mdev->intf_state))
+ free_netdev(netdev);
}
static void *mlx5e_get_netdev(void *vpriv)
return rule;
}
-static struct mlx5_flow_rule *add_rule_to_auto_fg(struct mlx5_flow_table *ft,
- u8 match_criteria_enable,
- u32 *match_criteria,
- u32 *match_value,
- u8 action,
- u32 flow_tag,
- struct mlx5_flow_destination *dest)
-{
- struct mlx5_flow_rule *rule;
- struct mlx5_flow_group *g;
-
- g = create_autogroup(ft, match_criteria_enable, match_criteria);
- if (IS_ERR(g))
- return (void *)g;
-
- rule = add_rule_fg(g, match_value,
- action, flow_tag, dest);
- if (IS_ERR(rule)) {
- /* Remove assumes refcount > 0 and autogroup creates a group
- * with a refcount = 0.
- */
- tree_get_node(&g->node);
- tree_remove_node(&g->node);
- }
- return rule;
-}
-
static struct mlx5_flow_rule *
_mlx5_add_flow_rule(struct mlx5_flow_table *ft,
u8 match_criteria_enable,
goto unlock;
}
- rule = add_rule_to_auto_fg(ft, match_criteria_enable, match_criteria,
- match_value, action, flow_tag, dest);
+ g = create_autogroup(ft, match_criteria_enable, match_criteria);
+ if (IS_ERR(g)) {
+ rule = (void *)g;
+ goto unlock;
+ }
+
+ rule = add_rule_fg(g, match_value,
+ action, flow_tag, dest);
+ if (IS_ERR(rule)) {
+ /* Remove assumes refcount > 0 and autogroup creates a group
+ * with a refcount = 0.
+ */
+ unlock_ref_node(&ft->node);
+ tree_get_node(&g->node);
+ tree_remove_node(&g->node);
+ return rule;
+ }
unlock:
unlock_ref_node(&ft->node);
return rule;
{
struct mlx5_flow_root_namespace *root_ns = dev->priv.root_ns;
int prio;
- static struct fs_prio *fs_prio;
+ struct fs_prio *fs_prio;
struct mlx5_flow_namespace *ns;
if (!root_ns)
int err;
mutex_lock(&dev->intf_state_mutex);
- if (dev->interface_state == MLX5_INTERFACE_STATE_UP) {
+ if (test_bit(MLX5_INTERFACE_STATE_UP, &dev->intf_state)) {
dev_warn(&dev->pdev->dev, "%s: interface is up, NOP\n",
__func__);
goto out;
if (err)
pr_info("failed request module on %s\n", MLX5_IB_MOD);
- dev->interface_state = MLX5_INTERFACE_STATE_UP;
+ clear_bit(MLX5_INTERFACE_STATE_DOWN, &dev->intf_state);
+ set_bit(MLX5_INTERFACE_STATE_UP, &dev->intf_state);
out:
mutex_unlock(&dev->intf_state_mutex);
}
mutex_lock(&dev->intf_state_mutex);
- if (dev->interface_state == MLX5_INTERFACE_STATE_DOWN) {
+ if (test_bit(MLX5_INTERFACE_STATE_DOWN, &dev->intf_state)) {
dev_warn(&dev->pdev->dev, "%s: interface is down, NOP\n",
__func__);
goto out;
mlx5_cmd_cleanup(dev);
out:
- dev->interface_state = MLX5_INTERFACE_STATE_DOWN;
+ clear_bit(MLX5_INTERFACE_STATE_UP, &dev->intf_state);
+ set_bit(MLX5_INTERFACE_STATE_DOWN, &dev->intf_state);
mutex_unlock(&dev->intf_state_mutex);
return err;
}
.resume = mlx5_pci_resume
};
+static void shutdown(struct pci_dev *pdev)
+{
+ struct mlx5_core_dev *dev = pci_get_drvdata(pdev);
+ struct mlx5_priv *priv = &dev->priv;
+
+ dev_info(&pdev->dev, "Shutdown was called\n");
+ /* Notify mlx5 clients that the kernel is being shut down */
+ set_bit(MLX5_INTERFACE_STATE_SHUTDOWN, &dev->intf_state);
+ mlx5_unload_one(dev, priv);
+ mlx5_pci_disable_device(dev);
+}
+
static const struct pci_device_id mlx5_core_pci_table[] = {
{ PCI_VDEVICE(MELLANOX, 0x1011) }, /* Connect-IB */
{ PCI_VDEVICE(MELLANOX, 0x1012), MLX5_PCI_DEV_IS_VF}, /* Connect-IB VF */
{ PCI_VDEVICE(MELLANOX, 0x1014), MLX5_PCI_DEV_IS_VF}, /* ConnectX-4 VF */
{ PCI_VDEVICE(MELLANOX, 0x1015) }, /* ConnectX-4LX */
{ PCI_VDEVICE(MELLANOX, 0x1016), MLX5_PCI_DEV_IS_VF}, /* ConnectX-4LX VF */
+ { PCI_VDEVICE(MELLANOX, 0x1017) }, /* ConnectX-5 */
+ { PCI_VDEVICE(MELLANOX, 0x1018), MLX5_PCI_DEV_IS_VF}, /* ConnectX-5 VF */
{ 0, }
};
.id_table = mlx5_core_pci_table,
.probe = init_one,
.remove = remove_one,
+ .shutdown = shutdown,
.err_handler = &mlx5_err_handler,
.sriov_configure = mlx5_core_sriov_configure,
};
}
EXPORT_SYMBOL_GPL(mlx5_query_port_admin_status);
-static void mlx5_query_port_mtu(struct mlx5_core_dev *dev, int *admin_mtu,
- int *max_mtu, int *oper_mtu, u8 port)
+static void mlx5_query_port_mtu(struct mlx5_core_dev *dev, u16 *admin_mtu,
+ u16 *max_mtu, u16 *oper_mtu, u8 port)
{
u32 in[MLX5_ST_SZ_DW(pmtu_reg)];
u32 out[MLX5_ST_SZ_DW(pmtu_reg)];
*admin_mtu = MLX5_GET(pmtu_reg, out, admin_mtu);
}
-int mlx5_set_port_mtu(struct mlx5_core_dev *dev, int mtu, u8 port)
+int mlx5_set_port_mtu(struct mlx5_core_dev *dev, u16 mtu, u8 port)
{
u32 in[MLX5_ST_SZ_DW(pmtu_reg)];
u32 out[MLX5_ST_SZ_DW(pmtu_reg)];
}
EXPORT_SYMBOL_GPL(mlx5_set_port_mtu);
-void mlx5_query_port_max_mtu(struct mlx5_core_dev *dev, int *max_mtu,
+void mlx5_query_port_max_mtu(struct mlx5_core_dev *dev, u16 *max_mtu,
u8 port)
{
mlx5_query_port_mtu(dev, NULL, max_mtu, NULL, port);
}
EXPORT_SYMBOL_GPL(mlx5_query_port_max_mtu);
-void mlx5_query_port_oper_mtu(struct mlx5_core_dev *dev, int *oper_mtu,
+void mlx5_query_port_oper_mtu(struct mlx5_core_dev *dev, u16 *oper_mtu,
u8 port)
{
mlx5_query_port_mtu(dev, NULL, NULL, oper_mtu, port);
void mlx5_unmap_free_uar(struct mlx5_core_dev *mdev, struct mlx5_uar *uar)
{
- iounmap(uar->map);
- iounmap(uar->bf_map);
+ if (uar->map)
+ iounmap(uar->map);
+ else
+ iounmap(uar->bf_map);
mlx5_cmd_free_uar(mdev, uar->index);
}
EXPORT_SYMBOL(mlx5_unmap_free_uar);
}
EXPORT_SYMBOL_GPL(mlx5_modify_nic_vport_mac_address);
+int mlx5_query_nic_vport_mtu(struct mlx5_core_dev *mdev, u16 *mtu)
+{
+ int outlen = MLX5_ST_SZ_BYTES(query_nic_vport_context_out);
+ u32 *out;
+ int err;
+
+ out = mlx5_vzalloc(outlen);
+ if (!out)
+ return -ENOMEM;
+
+ err = mlx5_query_nic_vport_context(mdev, 0, out, outlen);
+ if (!err)
+ *mtu = MLX5_GET(query_nic_vport_context_out, out,
+ nic_vport_context.mtu);
+
+ kvfree(out);
+ return err;
+}
+EXPORT_SYMBOL_GPL(mlx5_query_nic_vport_mtu);
+
+int mlx5_modify_nic_vport_mtu(struct mlx5_core_dev *mdev, u16 mtu)
+{
+ int inlen = MLX5_ST_SZ_BYTES(modify_nic_vport_context_in);
+ void *in;
+ int err;
+
+ in = mlx5_vzalloc(inlen);
+ if (!in)
+ return -ENOMEM;
+
+ MLX5_SET(modify_nic_vport_context_in, in, field_select.mtu, 1);
+ MLX5_SET(modify_nic_vport_context_in, in, nic_vport_context.mtu, mtu);
+
+ err = mlx5_modify_nic_vport_context(mdev, in, inlen);
+
+ kvfree(in);
+ return err;
+}
+EXPORT_SYMBOL_GPL(mlx5_modify_nic_vport_mtu);
+
int mlx5_query_nic_vport_mac_list(struct mlx5_core_dev *dev,
u32 vport,
enum mlx5_list_type list_type,
return vxlan;
}
-int mlx5e_vxlan_add_port(struct mlx5e_priv *priv, u16 port)
+static void mlx5e_vxlan_add_port(struct work_struct *work)
{
+ struct mlx5e_vxlan_work *vxlan_work =
+ container_of(work, struct mlx5e_vxlan_work, work);
+ struct mlx5e_priv *priv = vxlan_work->priv;
struct mlx5e_vxlan_db *vxlan_db = &priv->vxlan;
+ u16 port = vxlan_work->port;
struct mlx5e_vxlan *vxlan;
int err;
- err = mlx5e_vxlan_core_add_port_cmd(priv->mdev, port);
- if (err)
- return err;
+ if (mlx5e_vxlan_core_add_port_cmd(priv->mdev, port))
+ goto free_work;
vxlan = kzalloc(sizeof(*vxlan), GFP_KERNEL);
- if (!vxlan) {
- err = -ENOMEM;
+ if (!vxlan)
goto err_delete_port;
- }
vxlan->udp_port = port;
if (err)
goto err_free;
- return 0;
+ goto free_work;
err_free:
kfree(vxlan);
err_delete_port:
mlx5e_vxlan_core_del_port_cmd(priv->mdev, port);
- return err;
+free_work:
+ kfree(vxlan_work);
}
static void __mlx5e_vxlan_core_del_port(struct mlx5e_priv *priv, u16 port)
kfree(vxlan);
}
-void mlx5e_vxlan_del_port(struct mlx5e_priv *priv, u16 port)
+static void mlx5e_vxlan_del_port(struct work_struct *work)
{
- if (!mlx5e_vxlan_lookup_port(priv, port))
- return;
+ struct mlx5e_vxlan_work *vxlan_work =
+ container_of(work, struct mlx5e_vxlan_work, work);
+ struct mlx5e_priv *priv = vxlan_work->priv;
+ u16 port = vxlan_work->port;
__mlx5e_vxlan_core_del_port(priv, port);
+
+ kfree(vxlan_work);
+}
+
+void mlx5e_vxlan_queue_work(struct mlx5e_priv *priv, sa_family_t sa_family,
+ u16 port, int add)
+{
+ struct mlx5e_vxlan_work *vxlan_work;
+
+ vxlan_work = kmalloc(sizeof(*vxlan_work), GFP_ATOMIC);
+ if (!vxlan_work)
+ return;
+
+ if (add)
+ INIT_WORK(&vxlan_work->work, mlx5e_vxlan_add_port);
+ else
+ INIT_WORK(&vxlan_work->work, mlx5e_vxlan_del_port);
+
+ vxlan_work->priv = priv;
+ vxlan_work->port = port;
+ vxlan_work->sa_family = sa_family;
+ queue_work(priv->wq, &vxlan_work->work);
}
void mlx5e_vxlan_cleanup(struct mlx5e_priv *priv)
u16 udp_port;
};
+struct mlx5e_vxlan_work {
+ struct work_struct work;
+ struct mlx5e_priv *priv;
+ sa_family_t sa_family;
+ u16 port;
+};
+
static inline bool mlx5e_vxlan_allowed(struct mlx5_core_dev *mdev)
{
return (MLX5_CAP_ETH(mdev, tunnel_stateless_vxlan) &&
}
void mlx5e_vxlan_init(struct mlx5e_priv *priv);
-int mlx5e_vxlan_add_port(struct mlx5e_priv *priv, u16 port);
-void mlx5e_vxlan_del_port(struct mlx5e_priv *priv, u16 port);
+void mlx5e_vxlan_queue_work(struct mlx5e_priv *priv, sa_family_t sa_family,
+ u16 port, int add);
struct mlx5e_vxlan *mlx5e_vxlan_lookup_port(struct mlx5e_priv *priv, u16 port);
void mlx5e_vxlan_cleanup(struct mlx5e_priv *priv);
del_timer_sync(&mgp->watchdog_timer);
mgp->running = MYRI10GE_ETH_STOPPING;
- local_bh_disable(); /* myri10ge_ss_lock_napi needs bh disabled */
for (i = 0; i < mgp->num_slices; i++) {
napi_disable(&mgp->ss[i].napi);
+ local_bh_disable(); /* myri10ge_ss_lock_napi needs this */
/* Lock the slice to prevent the busy_poll handler from
* accessing it. Later when we bring the NIC up, myri10ge_open
* resets the slice including this lock.
pr_info("Slice %d locked\n", i);
mdelay(1);
}
+ local_bh_enable();
}
- local_bh_enable();
netif_carrier_off(dev);
netif_tx_stop_all_queues(dev);
#define _QLCNIC_LINUX_MAJOR 5
#define _QLCNIC_LINUX_MINOR 3
-#define _QLCNIC_LINUX_SUBVERSION 63
-#define QLCNIC_LINUX_VERSIONID "5.3.63"
+#define _QLCNIC_LINUX_SUBVERSION 64
+#define QLCNIC_LINUX_VERSIONID "5.3.64"
#define QLCNIC_DRV_IDC_VER 0x01
#define QLCNIC_DRIVER_VERSION ((_QLCNIC_LINUX_MAJOR << 16) |\
(_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION))
return 0;
}
+ if (nic_data->datapath_caps &
+ 1 << MC_CMD_GET_CAPABILITIES_OUT_RX_RSS_LIMITED_LBN)
+ return -EOPNOTSUPP;
+
MCDI_SET_DWORD(inbuf, RSS_CONTEXT_ALLOC_IN_UPSTREAM_PORT_ID,
nic_data->vport_id);
MCDI_SET_DWORD(inbuf, RSS_CONTEXT_ALLOC_IN_TYPE, alloc_type);
bool replacing)
{
struct efx_ef10_nic_data *nic_data = efx->nic_data;
+ u32 flags = spec->flags;
memset(inbuf, 0, MC_CMD_FILTER_OP_IN_LEN);
+ /* Remove RSS flag if we don't have an RSS context. */
+ if (flags & EFX_FILTER_FLAG_RX_RSS &&
+ spec->rss_context == EFX_FILTER_RSS_CONTEXT_DEFAULT &&
+ nic_data->rx_rss_context == EFX_EF10_RSS_CONTEXT_INVALID)
+ flags &= ~EFX_FILTER_FLAG_RX_RSS;
+
if (replacing) {
MCDI_SET_DWORD(inbuf, FILTER_OP_IN_OP,
MC_CMD_FILTER_OP_IN_OP_REPLACE);
spec->dmaq_id == EFX_FILTER_RX_DMAQ_ID_DROP ?
0 : spec->dmaq_id);
MCDI_SET_DWORD(inbuf, FILTER_OP_IN_RX_MODE,
- (spec->flags & EFX_FILTER_FLAG_RX_RSS) ?
+ (flags & EFX_FILTER_FLAG_RX_RSS) ?
MC_CMD_FILTER_OP_IN_RX_MODE_RSS :
MC_CMD_FILTER_OP_IN_RX_MODE_SIMPLE);
- if (spec->flags & EFX_FILTER_FLAG_RX_RSS)
+ if (flags & EFX_FILTER_FLAG_RX_RSS)
MCDI_SET_DWORD(inbuf, FILTER_OP_IN_RX_CONTEXT,
spec->rss_context !=
EFX_FILTER_RSS_CONTEXT_DEFAULT ?
u32 reg_shift;
struct device *dev;
struct regmap *sys_mgr_base_addr;
- struct reset_control *stmmac_rst;
void __iomem *splitter_base;
bool f2h_ptp_ref_clk;
};
struct device_node *np_splitter;
struct resource res_splitter;
- dwmac->stmmac_rst = devm_reset_control_get(dev,
- STMMAC_RESOURCE_NAME);
- if (IS_ERR(dwmac->stmmac_rst)) {
- dev_info(dev, "Could not get reset control!\n");
- if (PTR_ERR(dwmac->stmmac_rst) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
- dwmac->stmmac_rst = NULL;
- }
-
dwmac->interface = of_get_phy_mode(np);
sys_mgr_base_addr = syscon_regmap_lookup_by_phandle(np, "altr,sysmgr-syscon");
return 0;
}
-static void socfpga_dwmac_exit(struct platform_device *pdev, void *priv)
-{
- struct socfpga_dwmac *dwmac = priv;
-
- /* On socfpga platform exit, assert and hold reset to the
- * enet controller - the default state after a hard reset.
- */
- if (dwmac->stmmac_rst)
- reset_control_assert(dwmac->stmmac_rst);
-}
-
static int socfpga_dwmac_init(struct platform_device *pdev, void *priv)
{
- struct socfpga_dwmac *dwmac = priv;
+ struct socfpga_dwmac *dwmac = priv;
struct net_device *ndev = platform_get_drvdata(pdev);
struct stmmac_priv *stpriv = NULL;
int ret = 0;
- if (ndev)
- stpriv = netdev_priv(ndev);
+ if (!ndev)
+ return -EINVAL;
+
+ stpriv = netdev_priv(ndev);
+ if (!stpriv)
+ return -EINVAL;
/* Assert reset to the enet controller before changing the phy mode */
- if (dwmac->stmmac_rst)
- reset_control_assert(dwmac->stmmac_rst);
+ if (stpriv->stmmac_rst)
+ reset_control_assert(stpriv->stmmac_rst);
/* Setup the phy mode in the system manager registers according to
* devicetree configuration
/* Deassert reset for the phy configuration to be sampled by
* the enet controller, and operation to start in requested mode
*/
- if (dwmac->stmmac_rst)
- reset_control_deassert(dwmac->stmmac_rst);
+ if (stpriv->stmmac_rst)
+ reset_control_deassert(stpriv->stmmac_rst);
/* Before the enet controller is suspended, the phy is suspended.
* This causes the phy clock to be gated. The enet controller is
* control register 0, and can be modified by the phy driver
* framework.
*/
- if (stpriv && stpriv->phydev)
+ if (stpriv->phydev)
phy_resume(stpriv->phydev);
return ret;
plat_dat->bsp_priv = dwmac;
plat_dat->init = socfpga_dwmac_init;
- plat_dat->exit = socfpga_dwmac_exit;
plat_dat->fix_mac_speed = socfpga_dwmac_fix_mac_speed;
- ret = socfpga_dwmac_init(pdev, plat_dat->bsp_priv);
- if (ret)
- return ret;
+ ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+ if (!ret)
+ ret = socfpga_dwmac_init(pdev, dwmac);
- return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+ return ret;
}
static const struct of_device_id socfpga_dwmac_match[] = {
spinlock_t lock;
struct platform_device *pdev;
struct net_device *ndev;
- struct device_node *phy_node;
struct napi_struct napi_rx;
struct napi_struct napi_tx;
struct device *dev;
cpsw_ale_add_mcast(priv->ale, priv->ndev->broadcast,
1 << slave_port, 0, 0, ALE_MCAST_FWD_2);
- if (priv->phy_node)
- slave->phy = of_phy_connect(priv->ndev, priv->phy_node,
+ if (slave->data->phy_node) {
+ slave->phy = of_phy_connect(priv->ndev, slave->data->phy_node,
&cpsw_adjust_link, 0, slave->data->phy_if);
- else
+ if (!slave->phy) {
+ dev_err(priv->dev, "phy \"%s\" not found on slave %d\n",
+ slave->data->phy_node->full_name,
+ slave->slave_num);
+ return;
+ }
+ } else {
slave->phy = phy_connect(priv->ndev, slave->data->phy_id,
&cpsw_adjust_link, slave->data->phy_if);
- if (IS_ERR(slave->phy)) {
- dev_err(priv->dev, "phy %s not found on slave %d\n",
- slave->data->phy_id, slave->slave_num);
- slave->phy = NULL;
- } else {
- phy_attached_info(slave->phy);
+ if (IS_ERR(slave->phy)) {
+ dev_err(priv->dev,
+ "phy \"%s\" not found on slave %d, err %ld\n",
+ slave->data->phy_id, slave->slave_num,
+ PTR_ERR(slave->phy));
+ slave->phy = NULL;
+ return;
+ }
+ }
- phy_start(slave->phy);
+ phy_attached_info(slave->phy);
- /* Configure GMII_SEL register */
- cpsw_phy_sel(&priv->pdev->dev, slave->phy->interface,
- slave->slave_num);
- }
+ phy_start(slave->phy);
+
+ /* Configure GMII_SEL register */
+ cpsw_phy_sel(&priv->pdev->dev, slave->phy->interface, slave->slave_num);
}
static inline void cpsw_add_default_vlan(struct cpsw_priv *priv)
slave->port_vlan = data->dual_emac_res_vlan;
}
-static int cpsw_probe_dt(struct cpsw_priv *priv,
+static int cpsw_probe_dt(struct cpsw_platform_data *data,
struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
struct device_node *slave_node;
- struct cpsw_platform_data *data = &priv->data;
int i = 0, ret;
u32 prop;
if (strcmp(slave_node->name, "slave"))
continue;
- priv->phy_node = of_parse_phandle(slave_node, "phy-handle", 0);
+ slave_data->phy_node = of_parse_phandle(slave_node,
+ "phy-handle", 0);
parp = of_get_property(slave_node, "phy_id", &lenp);
- if (of_phy_is_fixed_link(slave_node)) {
- struct device_node *phy_node;
- struct phy_device *phy_dev;
-
+ if (slave_data->phy_node) {
+ dev_dbg(&pdev->dev,
+ "slave[%d] using phy-handle=\"%s\"\n",
+ i, slave_data->phy_node->full_name);
+ } else if (of_phy_is_fixed_link(slave_node)) {
/* In the case of a fixed PHY, the DT node associated
* to the PHY is the Ethernet MAC DT node.
*/
ret = of_phy_register_fixed_link(slave_node);
if (ret)
return ret;
- phy_node = of_node_get(slave_node);
- phy_dev = of_phy_find_device(phy_node);
- if (!phy_dev)
- return -ENODEV;
- snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
- PHY_ID_FMT, phy_dev->mdio.bus->id,
- phy_dev->mdio.addr);
+ slave_data->phy_node = of_node_get(slave_node);
} else if (parp) {
u32 phyid;
struct device_node *mdio_node;
snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
PHY_ID_FMT, mdio->name, phyid);
} else {
- dev_err(&pdev->dev, "No slave[%d] phy_id or fixed-link property\n", i);
+ dev_err(&pdev->dev,
+ "No slave[%d] phy_id, phy-handle, or fixed-link property\n",
+ i);
goto no_phy_slave;
}
slave_data->phy_if = of_get_phy_mode(slave_node);
/* Select default pin state */
pinctrl_pm_select_default_state(&pdev->dev);
- if (cpsw_probe_dt(priv, pdev)) {
+ if (cpsw_probe_dt(&priv->data, pdev)) {
dev_err(&pdev->dev, "cpsw: platform data missing\n");
ret = -ENODEV;
goto clean_runtime_disable_ret;
#include <linux/phy.h>
struct cpsw_slave_data {
+ struct device_node *phy_node;
char phy_id[MII_BUS_ID_SIZE];
int phy_if;
u8 mac_addr[ETH_ALEN];
/* TODO: Add phy read and write and private statistics get feature */
- return phy_mii_ioctl(priv->phydev, ifrq, cmd);
+ if (priv->phydev)
+ return phy_mii_ioctl(priv->phydev, ifrq, cmd);
+ else
+ return -EOPNOTSUPP;
}
static int match_first_device(struct device *dev, void *data)
continue;
/* copy hw scan info */
- memcpy(target->hwinfo, scan_info, scan_info->size);
+ memcpy(target->hwinfo, scan_info, be16_to_cpu(scan_info->size));
target->essid_len = strnlen(scan_info->essid,
sizeof(scan_info->essid));
target->rate_len = 0;
macsec_skb_cb(skb)->valid = false;
skb = skb_share_check(skb, GFP_ATOMIC);
if (!skb)
- return NULL;
+ return ERR_PTR(-ENOMEM);
req = aead_request_alloc(rx_sa->key.tfm, GFP_ATOMIC);
if (!req) {
kfree_skb(skb);
- return NULL;
+ return ERR_PTR(-ENOMEM);
}
hdr = (struct macsec_eth_header *)skb->data;
skb = skb_unshare(skb, GFP_ATOMIC);
if (!skb) {
aead_request_free(req);
- return NULL;
+ return ERR_PTR(-ENOMEM);
}
} else {
/* integrity only: all headers + data authenticated */
dev_hold(dev);
ret = crypto_aead_decrypt(req);
if (ret == -EINPROGRESS) {
- return NULL;
+ return ERR_PTR(ret);
} else if (ret != 0) {
/* decryption/authentication failed
* 10.6 if validateFrames is disabled, deliver anyway
*/
if (ret != -EBADMSG) {
kfree_skb(skb);
- skb = NULL;
+ skb = ERR_PTR(ret);
}
} else {
macsec_skb_cb(skb)->valid = true;
secy->validate_frames != MACSEC_VALIDATE_DISABLED)
skb = macsec_decrypt(skb, dev, rx_sa, sci, secy);
- if (!skb) {
- macsec_rxsa_put(rx_sa);
+ if (IS_ERR(skb)) {
+ /* the decrypt callback needs the reference */
+ if (PTR_ERR(skb) != -EINPROGRESS)
+ macsec_rxsa_put(rx_sa);
rcu_read_unlock();
*pskb = NULL;
return RX_HANDLER_CONSUMED;
macsec_extra_len(macsec_skb_cb(skb)->has_sci));
macsec_reset_skb(skb, secy->netdev);
- macsec_rxsa_put(rx_sa);
+ if (rx_sa)
+ macsec_rxsa_put(rx_sa);
count_rx(dev, skb->len);
rcu_read_unlock();
}
rx_sa = kmalloc(sizeof(*rx_sa), GFP_KERNEL);
- if (init_rx_sa(rx_sa, nla_data(tb_sa[MACSEC_SA_ATTR_KEY]), secy->key_len,
- secy->icv_len)) {
+ if (!rx_sa || init_rx_sa(rx_sa, nla_data(tb_sa[MACSEC_SA_ATTR_KEY]),
+ secy->key_len, secy->icv_len)) {
+ kfree(rx_sa);
rtnl_unlock();
return -ENOMEM;
}
tx_sa = kmalloc(sizeof(*tx_sa), GFP_KERNEL);
if (!tx_sa || init_tx_sa(tx_sa, nla_data(tb_sa[MACSEC_SA_ATTR_KEY]),
secy->key_len, secy->icv_len)) {
+ kfree(tx_sa);
rtnl_unlock();
return -ENOMEM;
}
return 1;
if (nla_put_sci(skb, MACSEC_SECY_ATTR_SCI, secy->sci) ||
- nla_put_u64(skb, MACSEC_SECY_ATTR_CIPHER_SUITE, DEFAULT_CIPHER_ID) ||
+ nla_put_u64(skb, MACSEC_SECY_ATTR_CIPHER_SUITE,
+ MACSEC_DEFAULT_CIPHER_ID) ||
nla_put_u8(skb, MACSEC_SECY_ATTR_ICV_LEN, secy->icv_len) ||
nla_put_u8(skb, MACSEC_SECY_ATTR_OPER, secy->operational) ||
nla_put_u8(skb, MACSEC_SECY_ATTR_PROTECT, secy->protect_frames) ||
if (!hdr)
return -EMSGSIZE;
- rtnl_lock();
+ genl_dump_check_consistent(cb, hdr, &macsec_fam);
if (nla_put_u32(skb, MACSEC_ATTR_IFINDEX, dev->ifindex))
goto nla_put_failure;
nla_nest_end(skb, rxsc_list);
- rtnl_unlock();
-
genlmsg_end(skb, hdr);
return 0;
nla_put_failure:
- rtnl_unlock();
genlmsg_cancel(skb, hdr);
return -EMSGSIZE;
}
+static int macsec_generation = 1; /* protected by RTNL */
+
static int macsec_dump_txsc(struct sk_buff *skb, struct netlink_callback *cb)
{
struct net *net = sock_net(skb->sk);
dev_idx = cb->args[0];
d = 0;
+ rtnl_lock();
+
+ cb->seq = macsec_generation;
+
for_each_netdev(net, dev) {
struct macsec_secy *secy;
}
done:
+ rtnl_unlock();
cb->args[0] = d;
return skb->len;
}
struct net_device *real_dev = macsec->real_dev;
struct macsec_rxh_data *rxd = macsec_data_rtnl(real_dev);
+ macsec_generation++;
+
unregister_netdevice_queue(dev, head);
list_del_rcu(&macsec->secys);
- if (list_empty(&rxd->secys))
+ if (list_empty(&rxd->secys)) {
netdev_rx_handler_unregister(real_dev);
+ kfree(rxd);
+ }
macsec_del_dev(macsec);
}
err = netdev_rx_handler_register(real_dev, macsec_handle_frame,
rxd);
- if (err < 0)
+ if (err < 0) {
+ kfree(rxd);
return err;
+ }
}
list_add_tail_rcu(&macsec->secys, &rxd->secys);
if (err < 0)
goto del_dev;
+ macsec_generation++;
+
dev_hold(real_dev);
return 0;
static int macsec_validate_attr(struct nlattr *tb[], struct nlattr *data[])
{
- u64 csid = DEFAULT_CIPHER_ID;
+ u64 csid = MACSEC_DEFAULT_CIPHER_ID;
u8 icv_len = DEFAULT_ICV_LEN;
int flag;
bool es, scb, sci;
icv_len = nla_get_u8(data[IFLA_MACSEC_ICV_LEN]);
switch (csid) {
- case DEFAULT_CIPHER_ID:
- case DEFAULT_CIPHER_ALT:
+ case MACSEC_DEFAULT_CIPHER_ID:
+ case MACSEC_DEFAULT_CIPHER_ALT:
if (icv_len < MACSEC_MIN_ICV_LEN ||
icv_len > MACSEC_MAX_ICV_LEN)
return -EINVAL;
nla_get_u8(data[IFLA_MACSEC_VALIDATION]) > MACSEC_VALIDATE_MAX)
return -EINVAL;
- if ((data[IFLA_MACSEC_PROTECT] &&
- nla_get_u8(data[IFLA_MACSEC_PROTECT])) &&
+ if ((data[IFLA_MACSEC_REPLAY_PROTECT] &&
+ nla_get_u8(data[IFLA_MACSEC_REPLAY_PROTECT])) &&
!data[IFLA_MACSEC_WINDOW])
return -EINVAL;
if (nla_put_sci(skb, IFLA_MACSEC_SCI, secy->sci) ||
nla_put_u8(skb, IFLA_MACSEC_ICV_LEN, secy->icv_len) ||
- nla_put_u64(skb, IFLA_MACSEC_CIPHER_SUITE, DEFAULT_CIPHER_ID) ||
+ nla_put_u64(skb, IFLA_MACSEC_CIPHER_SUITE,
+ MACSEC_DEFAULT_CIPHER_ID) ||
nla_put_u8(skb, IFLA_MACSEC_ENCODING_SA, tx_sc->encoding_sa) ||
nla_put_u8(skb, IFLA_MACSEC_ENCRYPT, tx_sc->encrypt) ||
nla_put_u8(skb, IFLA_MACSEC_PROTECT, secy->protect_frames) ||
* in the FIFO. In such cases, the FIFO enters an error mode it
* cannot recover from by software.
*/
- if (phydev->drv->phy_id == ATH8030_PHY_ID) {
- if (phydev->state == PHY_NOLINK) {
- if (priv->gpiod_reset && !priv->phy_reset) {
- struct at803x_context context;
-
- at803x_context_save(phydev, &context);
-
- gpiod_set_value(priv->gpiod_reset, 1);
- msleep(1);
- gpiod_set_value(priv->gpiod_reset, 0);
- msleep(1);
-
- at803x_context_restore(phydev, &context);
-
- phydev_dbg(phydev, "%s(): phy was reset\n",
- __func__);
- priv->phy_reset = true;
- }
- } else {
- priv->phy_reset = false;
+ if (phydev->state == PHY_NOLINK) {
+ if (priv->gpiod_reset && !priv->phy_reset) {
+ struct at803x_context context;
+
+ at803x_context_save(phydev, &context);
+
+ gpiod_set_value(priv->gpiod_reset, 1);
+ msleep(1);
+ gpiod_set_value(priv->gpiod_reset, 0);
+ msleep(1);
+
+ at803x_context_restore(phydev, &context);
+
+ phydev_dbg(phydev, "%s(): phy was reset\n",
+ __func__);
+ priv->phy_reset = true;
}
+ } else {
+ priv->phy_reset = false;
}
}
.phy_id_mask = 0xffffffef,
.probe = at803x_probe,
.config_init = at803x_config_init,
- .link_change_notify = at803x_link_change_notify,
.set_wol = at803x_set_wol,
.get_wol = at803x_get_wol,
.suspend = at803x_suspend,
.phy_id_mask = 0xffffffef,
.probe = at803x_probe,
.config_init = at803x_config_init,
- .link_change_notify = at803x_link_change_notify,
.set_wol = at803x_set_wol,
.get_wol = at803x_get_wol,
.suspend = at803x_suspend,
struct lan78xx_net *dev;
enum skb_state state;
size_t length;
+ int num_of_packet;
};
struct usb_context {
static void lan78xx_link_status_change(struct net_device *net)
{
- /* nothing to do */
+ struct phy_device *phydev = net->phydev;
+ int ret, temp;
+
+ /* At forced 100 F/H mode, chip may fail to set mode correctly
+ * when cable is switched between long(~50+m) and short one.
+ * As workaround, set to 10 before setting to 100
+ * at forced 100 F/H mode.
+ */
+ if (!phydev->autoneg && (phydev->speed == 100)) {
+ /* disable phy interrupt */
+ temp = phy_read(phydev, LAN88XX_INT_MASK);
+ temp &= ~LAN88XX_INT_MASK_MDINTPIN_EN_;
+ ret = phy_write(phydev, LAN88XX_INT_MASK, temp);
+
+ temp = phy_read(phydev, MII_BMCR);
+ temp &= ~(BMCR_SPEED100 | BMCR_SPEED1000);
+ phy_write(phydev, MII_BMCR, temp); /* set to 10 first */
+ temp |= BMCR_SPEED100;
+ phy_write(phydev, MII_BMCR, temp); /* set to 100 later */
+
+ /* clear pending interrupt generated while workaround */
+ temp = phy_read(phydev, LAN88XX_INT_STS);
+
+ /* enable phy interrupt back */
+ temp = phy_read(phydev, LAN88XX_INT_MASK);
+ temp |= LAN88XX_INT_MASK_MDINTPIN_EN_;
+ ret = phy_write(phydev, LAN88XX_INT_MASK, temp);
+ }
}
static int lan78xx_phy_init(struct lan78xx_net *dev)
struct lan78xx_net *dev = entry->dev;
if (urb->status == 0) {
- dev->net->stats.tx_packets++;
+ dev->net->stats.tx_packets += entry->num_of_packet;
dev->net->stats.tx_bytes += entry->length;
} else {
dev->net->stats.tx_errors++;
return;
}
- skb->protocol = eth_type_trans(skb, dev->net);
dev->net->stats.rx_packets++;
dev->net->stats.rx_bytes += skb->len;
+ skb->protocol = eth_type_trans(skb, dev->net);
+
netif_dbg(dev, rx_status, dev->net, "< rx, len %zu, type 0x%x\n",
skb->len + sizeof(struct ethhdr), skb->protocol);
memset(skb->cb, 0, sizeof(struct skb_data));
skb_totallen = 0;
pkt_cnt = 0;
+ count = 0;
+ length = 0;
for (skb = tqp->next; pkt_cnt < tqp->qlen; skb = skb->next) {
if (skb_is_gso(skb)) {
if (pkt_cnt) {
/* handle previous packets first */
break;
}
- length = skb->len;
+ count = 1;
+ length = skb->len - TX_OVERHEAD;
skb2 = skb_dequeue(tqp);
goto gso_skb;
}
for (count = pos = 0; count < pkt_cnt; count++) {
skb2 = skb_dequeue(tqp);
if (skb2) {
+ length += (skb2->len - TX_OVERHEAD);
memcpy(skb->data + pos, skb2->data, skb2->len);
pos += roundup(skb2->len, sizeof(u32));
dev_kfree_skb(skb2);
}
}
- length = skb_totallen;
-
gso_skb:
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
entry->urb = urb;
entry->dev = dev;
entry->length = length;
+ entry->num_of_packet = count;
spin_lock_irqsave(&dev->txq.lock, flags);
ret = usb_autopm_get_interface_async(dev->intf);
int ret;
read_mii_word(pegasus, pegasus->phy, MII_LPA, &linkpart);
- data[0] = 0xc9;
+ data[0] = 0xc8; /* TX & RX enable, append status, no CRC */
data[1] = 0;
if (linkpart & (ADVERTISE_100FULL | ADVERTISE_10FULL))
data[1] |= 0x20; /* set full duplex */
pkt_len = buf[count - 3] << 8;
pkt_len += buf[count - 4];
pkt_len &= 0xfff;
- pkt_len -= 8;
+ pkt_len -= 4;
}
/*
goon:
usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb,
usb_rcvbulkpipe(pegasus->usb, 1),
- pegasus->rx_skb->data, PEGASUS_MTU + 8,
+ pegasus->rx_skb->data, PEGASUS_MTU,
read_bulk_callback, pegasus);
rx_status = usb_submit_urb(pegasus->rx_urb, GFP_ATOMIC);
if (rx_status == -ENODEV)
}
usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb,
usb_rcvbulkpipe(pegasus->usb, 1),
- pegasus->rx_skb->data, PEGASUS_MTU + 8,
+ pegasus->rx_skb->data, PEGASUS_MTU,
read_bulk_callback, pegasus);
try_again:
status = usb_submit_urb(pegasus->rx_urb, GFP_ATOMIC);
usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb,
usb_rcvbulkpipe(pegasus->usb, 1),
- pegasus->rx_skb->data, PEGASUS_MTU + 8,
+ pegasus->rx_skb->data, PEGASUS_MTU,
read_bulk_callback, pegasus);
if ((res = usb_submit_urb(pegasus->rx_urb, GFP_KERNEL))) {
if (res == -ENODEV)
#include <linux/crc32.h>
#include <linux/usb/usbnet.h>
#include <linux/slab.h>
+#include <linux/of_net.h>
#include "smsc75xx.h"
#define SMSC_CHIPNAME "smsc75xx"
static void smsc75xx_init_mac_address(struct usbnet *dev)
{
+ const u8 *mac_addr;
+
+ /* maybe the boot loader passed the MAC address in devicetree */
+ mac_addr = of_get_mac_address(dev->udev->dev.of_node);
+ if (mac_addr) {
+ memcpy(dev->net->dev_addr, mac_addr, ETH_ALEN);
+ return;
+ }
+
/* try reading mac address from EEPROM */
if (smsc75xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
dev->net->dev_addr) == 0) {
}
}
- /* no eeprom, or eeprom values are invalid. generate random MAC */
+ /* no useful static MAC address found. generate a random one */
eth_hw_addr_random(dev->net);
netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr\n");
}
#include <linux/crc32.h>
#include <linux/usb/usbnet.h>
#include <linux/slab.h>
+#include <linux/of_net.h>
#include "smsc95xx.h"
#define SMSC_CHIPNAME "smsc95xx"
static void smsc95xx_init_mac_address(struct usbnet *dev)
{
+ const u8 *mac_addr;
+
+ /* maybe the boot loader passed the MAC address in devicetree */
+ mac_addr = of_get_mac_address(dev->udev->dev.of_node);
+ if (mac_addr) {
+ memcpy(dev->net->dev_addr, mac_addr, ETH_ALEN);
+ return;
+ }
+
/* try reading mac address from EEPROM */
if (smsc95xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
dev->net->dev_addr) == 0) {
}
}
- /* no eeprom, or eeprom values are invalid. generate random MAC */
+ /* no useful static MAC address found. generate a random one */
eth_hw_addr_random(dev->net);
netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr\n");
}
};
static const int inc[4] = { 0, 100, 0, 0 };
+ memset(&mask_m, 0, sizeof(int8_t) * 123);
+ memset(&mask_p, 0, sizeof(int8_t) * 123);
+
cur_bin = -6000;
upper = bin + 100;
lower = bin - 100;
int tmp, new;
int i;
- int8_t mask_m[123];
- int8_t mask_p[123];
int cur_bb_spur;
bool is2GHz = IS_CHAN_2GHZ(chan);
- memset(&mask_m, 0, sizeof(int8_t) * 123);
- memset(&mask_p, 0, sizeof(int8_t) * 123);
-
for (i = 0; i < AR_EEPROM_MODAL_SPURS; i++) {
cur_bb_spur = ah->eep_ops->get_spur_channel(ah, i, is2GHz);
if (AR_NO_SPUR == cur_bb_spur)
int i;
struct chan_centers centers;
- int8_t mask_m[123];
- int8_t mask_p[123];
int cur_bb_spur;
bool is2GHz = IS_CHAN_2GHZ(chan);
- memset(&mask_m, 0, sizeof(int8_t) * 123);
- memset(&mask_p, 0, sizeof(int8_t) * 123);
-
ath9k_hw_get_channel_centers(ah, chan, ¢ers);
freq = centers.synth_center;
#define IWL8260_SMEM_OFFSET 0x400000
#define IWL8260_SMEM_LEN 0x68000
-#define IWL8000_FW_PRE "iwlwifi-8000"
+#define IWL8000_FW_PRE "iwlwifi-8000C-"
#define IWL8000_MODULE_FIRMWARE(api) \
IWL8000_FW_PRE "-" __stringify(api) ".ucode"
snprintf(drv->firmware_name, sizeof(drv->firmware_name), "%s%s.ucode",
name_pre, tag);
- /*
- * Starting 8000B - FW name format has changed. This overwrites the
- * previous name and uses the new format.
- */
- if (drv->trans->cfg->device_family == IWL_DEVICE_FAMILY_8000) {
- char rev_step = 'A' + CSR_HW_REV_STEP(drv->trans->hw_rev);
-
- if (rev_step != 'A')
- snprintf(drv->firmware_name,
- sizeof(drv->firmware_name), "%s%c-%s.ucode",
- name_pre, rev_step, tag);
- }
-
IWL_DEBUG_INFO(drv, "attempting to load firmware %s'%s'\n",
(drv->fw_index == UCODE_EXPERIMENTAL_INDEX)
? "EXPERIMENTAL " : "",
return -EINVAL;
}
- if (WARN(fw_has_capa(capa, IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT) &&
- !gscan_capa,
- "GSCAN is supported but capabilities TLV is unavailable\n"))
+ /*
+ * If ucode advertises that it supports GSCAN but GSCAN
+ * capabilities TLV is not present, or if it has an old format,
+ * warn and continue without GSCAN.
+ */
+ if (fw_has_capa(capa, IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT) &&
+ !gscan_capa) {
+ IWL_DEBUG_INFO(drv,
+ "GSCAN is supported but capabilities TLV is unavailable\n");
__clear_bit((__force long)IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT,
capa->_capa);
+ }
return 0;
file_len += sizeof(*dump_data) + sizeof(*dump_mem) + sram2_len;
/* Make room for fw's virtual image pages, if it exists */
- if (mvm->fw->img[mvm->cur_ucode].paging_mem_size)
+ if (mvm->fw->img[mvm->cur_ucode].paging_mem_size &&
+ mvm->fw_paging_db[0].fw_paging_block)
file_len += mvm->num_of_paging_blk *
(sizeof(*dump_data) +
sizeof(struct iwl_fw_error_dump_paging) +
}
/* Dump fw's virtual image */
- if (mvm->fw->img[mvm->cur_ucode].paging_mem_size) {
+ if (mvm->fw->img[mvm->cur_ucode].paging_mem_size &&
+ mvm->fw_paging_db[0].fw_paging_block) {
for (i = 1; i < mvm->num_of_paging_blk + 1; i++) {
struct iwl_fw_error_dump_paging *paging;
struct page *pages =
__free_pages(mvm->fw_paging_db[i].fw_paging_block,
get_order(mvm->fw_paging_db[i].fw_paging_size));
+ mvm->fw_paging_db[i].fw_paging_block = NULL;
}
kfree(mvm->trans->paging_download_buf);
mvm->trans->paging_download_buf = NULL;
+ mvm->trans->paging_db = NULL;
memset(mvm->fw_paging_db, 0, sizeof(mvm->fw_paging_db));
}
{IWL_PCI_DEVICE(0x24F3, 0x0930, iwl8260_2ac_cfg)},
{IWL_PCI_DEVICE(0x24F3, 0x0000, iwl8265_2ac_cfg)},
{IWL_PCI_DEVICE(0x24FD, 0x0010, iwl8265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x24FD, 0x0110, iwl8265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x24FD, 0x1110, iwl8265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x24FD, 0x1010, iwl8265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x24FD, 0x0050, iwl8265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x24FD, 0x0150, iwl8265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x24FD, 0x9010, iwl8265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x24FD, 0x8110, iwl8265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x24FD, 0x8050, iwl8265_2ac_cfg)},
{IWL_PCI_DEVICE(0x24FD, 0x8010, iwl8265_2ac_cfg)},
{IWL_PCI_DEVICE(0x24FD, 0x0810, iwl8265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x24FD, 0x9110, iwl8265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x24FD, 0x8130, iwl8265_2ac_cfg)},
/* 9000 Series */
{IWL_PCI_DEVICE(0x9DF0, 0x2A10, iwl5165_2ac_cfg)},
*/
start += start_pad;
npfns = (pmem->size - start_pad - end_trunc - SZ_8K) / SZ_4K;
- if (nd_pfn->mode == PFN_MODE_PMEM)
- offset = ALIGN(start + SZ_8K + 64 * npfns, nd_pfn->align)
+ if (nd_pfn->mode == PFN_MODE_PMEM) {
+ unsigned long memmap_size;
+
+ /*
+ * vmemmap_populate_hugepages() allocates the memmap array in
+ * HPAGE_SIZE chunks.
+ */
+ memmap_size = ALIGN(64 * npfns, HPAGE_SIZE);
+ offset = ALIGN(start + SZ_8K + memmap_size, nd_pfn->align)
- start;
- else if (nd_pfn->mode == PFN_MODE_RAM)
+ } else if (nd_pfn->mode == PFN_MODE_RAM)
offset = ALIGN(start + SZ_8K, nd_pfn->align) - start;
else
goto err;
if (ret)
goto close_banks;
- while (val_size) {
+ while (val_size >= reg_size) {
if ((offset < OCOTP_DATA_OFFSET) || (offset % 16)) {
/* fill up non-data register */
*buf = 0;
}
buf++;
- val_size--;
+ val_size -= reg_size;
offset += reg_size;
}
/* Field definitions */
#define HCI_ACCEL_MASK 0x7fff
#define HCI_HOTKEY_DISABLE 0x0b
-#define HCI_HOTKEY_ENABLE 0x01
+#define HCI_HOTKEY_ENABLE 0x09
#define HCI_HOTKEY_SPECIAL_FUNCTIONS 0x10
#define HCI_LCD_BRIGHTNESS_BITS 3
#define HCI_LCD_BRIGHTNESS_SHIFT (16-HCI_LCD_BRIGHTNESS_BITS)
RAPL_CPU(0X5C, rapl_defaults_core),/* Broxton */
RAPL_CPU(0x5E, rapl_defaults_core),/* Skylake-H/S */
RAPL_CPU(0x57, rapl_defaults_hsw_server),/* Knights Landing */
+ RAPL_CPU(0x8E, rapl_defaults_core),/* Kabylake */
+ RAPL_CPU(0x9E, rapl_defaults_core),/* Kabylake */
{}
};
MODULE_DEVICE_TABLE(x86cpu, rapl_ids);
struct list_head node;
struct mport_dev *md;
enum rio_mport_map_dir dir;
- u32 rioid;
+ u16 rioid;
u64 rio_addr;
dma_addr_t phys_addr; /* for mmap */
void *virt_addr; /* kernel address, for dma_free_coherent */
struct rio_mport_dma_map {
int valid;
- uint64_t length;
+ u64 length;
void *vaddr;
dma_addr_t paddr;
};
struct kfifo event_fifo;
wait_queue_head_t event_rx_wait;
spinlock_t fifo_lock;
- unsigned int event_mask; /* RIO_DOORBELL, RIO_PORTWRITE */
+ u32 event_mask; /* RIO_DOORBELL, RIO_PORTWRITE */
#ifdef CONFIG_RAPIDIO_DMA_ENGINE
struct dma_chan *dmach;
struct list_head async_list;
return -EFAULT;
if ((maint_io.offset % 4) ||
- (maint_io.length == 0) || (maint_io.length % 4))
+ (maint_io.length == 0) || (maint_io.length % 4) ||
+ (maint_io.length + maint_io.offset) > RIO_MAINT_SPACE_SZ)
return -EINVAL;
buffer = vmalloc(maint_io.length);
offset += 4;
}
- if (unlikely(copy_to_user(maint_io.buffer, buffer, maint_io.length)))
+ if (unlikely(copy_to_user((void __user *)(uintptr_t)maint_io.buffer,
+ buffer, maint_io.length)))
ret = -EFAULT;
out:
vfree(buffer);
return -EFAULT;
if ((maint_io.offset % 4) ||
- (maint_io.length == 0) || (maint_io.length % 4))
+ (maint_io.length == 0) || (maint_io.length % 4) ||
+ (maint_io.length + maint_io.offset) > RIO_MAINT_SPACE_SZ)
return -EINVAL;
buffer = vmalloc(maint_io.length);
return -ENOMEM;
length = maint_io.length;
- if (unlikely(copy_from_user(buffer, maint_io.buffer, length))) {
+ if (unlikely(copy_from_user(buffer,
+ (void __user *)(uintptr_t)maint_io.buffer, length))) {
ret = -EFAULT;
goto out;
}
*/
static int
rio_mport_create_outbound_mapping(struct mport_dev *md, struct file *filp,
- u32 rioid, u64 raddr, u32 size,
+ u16 rioid, u64 raddr, u32 size,
dma_addr_t *paddr)
{
struct rio_mport *mport = md->mport;
rmcd_debug(OBW, "did=%d ra=0x%llx sz=0x%x", rioid, raddr, size);
- map = kzalloc(sizeof(struct rio_mport_mapping), GFP_KERNEL);
+ map = kzalloc(sizeof(*map), GFP_KERNEL);
if (map == NULL)
return -ENOMEM;
static int
rio_mport_get_outbound_mapping(struct mport_dev *md, struct file *filp,
- u32 rioid, u64 raddr, u32 size,
+ u16 rioid, u64 raddr, u32 size,
dma_addr_t *paddr)
{
struct rio_mport_mapping *map;
dma_addr_t paddr;
int ret;
- if (unlikely(copy_from_user(&map, arg, sizeof(struct rio_mmap))))
+ if (unlikely(copy_from_user(&map, arg, sizeof(map))))
return -EFAULT;
rmcd_debug(OBW, "did=%d ra=0x%llx sz=0x%llx",
map.handle = paddr;
- if (unlikely(copy_to_user(arg, &map, sizeof(struct rio_mmap))))
+ if (unlikely(copy_to_user(arg, &map, sizeof(map))))
return -EFAULT;
return 0;
}
if (!md->mport->ops->unmap_outb)
return -EPROTONOSUPPORT;
- if (copy_from_user(&handle, arg, sizeof(u64)))
+ if (copy_from_user(&handle, arg, sizeof(handle)))
return -EFAULT;
rmcd_debug(OBW, "h=0x%llx", handle);
static int maint_hdid_set(struct mport_cdev_priv *priv, void __user *arg)
{
struct mport_dev *md = priv->md;
- uint16_t hdid;
+ u16 hdid;
- if (copy_from_user(&hdid, arg, sizeof(uint16_t)))
+ if (copy_from_user(&hdid, arg, sizeof(hdid)))
return -EFAULT;
md->mport->host_deviceid = hdid;
static int maint_comptag_set(struct mport_cdev_priv *priv, void __user *arg)
{
struct mport_dev *md = priv->md;
- uint32_t comptag;
+ u32 comptag;
- if (copy_from_user(&comptag, arg, sizeof(uint32_t)))
+ if (copy_from_user(&comptag, arg, sizeof(comptag)))
return -EFAULT;
rio_local_write_config_32(md->mport, RIO_COMPONENT_TAG_CSR, comptag);
* @xfer: data transfer descriptor structure
*/
static int
-rio_dma_transfer(struct file *filp, uint32_t transfer_mode,
+rio_dma_transfer(struct file *filp, u32 transfer_mode,
enum rio_transfer_sync sync, enum dma_data_direction dir,
struct rio_transfer_io *xfer)
{
unsigned long offset;
long pinned;
- offset = (unsigned long)xfer->loc_addr & ~PAGE_MASK;
+ offset = (unsigned long)(uintptr_t)xfer->loc_addr & ~PAGE_MASK;
nr_pages = PAGE_ALIGN(xfer->length + offset) >> PAGE_SHIFT;
page_list = kmalloc_array(nr_pages,
if (unlikely(copy_from_user(&transaction, arg, sizeof(transaction))))
return -EFAULT;
- if (transaction.count != 1)
+ if (transaction.count != 1) /* only single transfer for now */
return -EINVAL;
if ((transaction.transfer_mode &
priv->md->properties.transfer_mode) == 0)
return -ENODEV;
- transfer = vmalloc(transaction.count * sizeof(struct rio_transfer_io));
+ transfer = vmalloc(transaction.count * sizeof(*transfer));
if (!transfer)
return -ENOMEM;
- if (unlikely(copy_from_user(transfer, transaction.block,
- transaction.count * sizeof(struct rio_transfer_io)))) {
+ if (unlikely(copy_from_user(transfer,
+ (void __user *)(uintptr_t)transaction.block,
+ transaction.count * sizeof(*transfer)))) {
ret = -EFAULT;
goto out_free;
}
ret = rio_dma_transfer(filp, transaction.transfer_mode,
transaction.sync, dir, &transfer[i]);
- if (unlikely(copy_to_user(transaction.block, transfer,
- transaction.count * sizeof(struct rio_transfer_io))))
+ if (unlikely(copy_to_user((void __user *)(uintptr_t)transaction.block,
+ transfer,
+ transaction.count * sizeof(*transfer))))
ret = -EFAULT;
out_free:
}
static int rio_mport_create_dma_mapping(struct mport_dev *md, struct file *filp,
- uint64_t size, struct rio_mport_mapping **mapping)
+ u64 size, struct rio_mport_mapping **mapping)
{
struct rio_mport_mapping *map;
- map = kzalloc(sizeof(struct rio_mport_mapping), GFP_KERNEL);
+ map = kzalloc(sizeof(*map), GFP_KERNEL);
if (map == NULL)
return -ENOMEM;
struct rio_mport_mapping *mapping = NULL;
int ret;
- if (unlikely(copy_from_user(&map, arg, sizeof(struct rio_dma_mem))))
+ if (unlikely(copy_from_user(&map, arg, sizeof(map))))
return -EFAULT;
ret = rio_mport_create_dma_mapping(md, filp, map.length, &mapping);
map.dma_handle = mapping->phys_addr;
- if (unlikely(copy_to_user(arg, &map, sizeof(struct rio_dma_mem)))) {
+ if (unlikely(copy_to_user(arg, &map, sizeof(map)))) {
mutex_lock(&md->buf_mutex);
kref_put(&mapping->ref, mport_release_mapping);
mutex_unlock(&md->buf_mutex);
int ret = -EFAULT;
struct rio_mport_mapping *map, *_map;
- if (copy_from_user(&handle, arg, sizeof(u64)))
+ if (copy_from_user(&handle, arg, sizeof(handle)))
return -EFAULT;
rmcd_debug(EXIT, "filp=%p", filp);
static int
rio_mport_create_inbound_mapping(struct mport_dev *md, struct file *filp,
- u64 raddr, u32 size,
+ u64 raddr, u64 size,
struct rio_mport_mapping **mapping)
{
struct rio_mport *mport = md->mport;
struct rio_mport_mapping *map;
int ret;
- map = kzalloc(sizeof(struct rio_mport_mapping), GFP_KERNEL);
+ /* rio_map_inb_region() accepts u32 size */
+ if (size > 0xffffffff)
+ return -EINVAL;
+
+ map = kzalloc(sizeof(*map), GFP_KERNEL);
if (map == NULL)
return -ENOMEM;
if (raddr == RIO_MAP_ANY_ADDR)
raddr = map->phys_addr;
- ret = rio_map_inb_region(mport, map->phys_addr, raddr, size, 0);
+ ret = rio_map_inb_region(mport, map->phys_addr, raddr, (u32)size, 0);
if (ret < 0)
goto err_map_inb;
static int
rio_mport_get_inbound_mapping(struct mport_dev *md, struct file *filp,
- u64 raddr, u32 size,
+ u64 raddr, u64 size,
struct rio_mport_mapping **mapping)
{
struct rio_mport_mapping *map;
if (!md->mport->ops->map_inb)
return -EPROTONOSUPPORT;
- if (unlikely(copy_from_user(&map, arg, sizeof(struct rio_mmap))))
+ if (unlikely(copy_from_user(&map, arg, sizeof(map))))
return -EFAULT;
rmcd_debug(IBW, "%s filp=%p", dev_name(&priv->md->dev), filp);
map.handle = mapping->phys_addr;
map.rio_addr = mapping->rio_addr;
- if (unlikely(copy_to_user(arg, &map, sizeof(struct rio_mmap)))) {
+ if (unlikely(copy_to_user(arg, &map, sizeof(map)))) {
/* Delete mapping if it was created by this request */
if (ret == 0 && mapping->filp == filp) {
mutex_lock(&md->buf_mutex);
if (!md->mport->ops->unmap_inb)
return -EPROTONOSUPPORT;
- if (copy_from_user(&handle, arg, sizeof(u64)))
+ if (copy_from_user(&handle, arg, sizeof(handle)))
return -EFAULT;
mutex_lock(&md->buf_mutex);
static int maint_port_idx_get(struct mport_cdev_priv *priv, void __user *arg)
{
struct mport_dev *md = priv->md;
- uint32_t port_idx = md->mport->index;
+ u32 port_idx = md->mport->index;
rmcd_debug(MPORT, "port_index=%d", port_idx);
handled = 0;
spin_lock(&data->db_lock);
list_for_each_entry(db_filter, &data->doorbells, data_node) {
- if (((db_filter->filter.rioid == 0xffffffff ||
+ if (((db_filter->filter.rioid == RIO_INVALID_DESTID ||
db_filter->filter.rioid == src)) &&
info >= db_filter->filter.low &&
info <= db_filter->filter.high) {
if (copy_from_user(&filter, arg, sizeof(filter)))
return -EFAULT;
+ if (filter.low > filter.high)
+ return -EINVAL;
+
spin_lock_irqsave(&priv->md->db_lock, flags);
list_for_each_entry(db_filter, &priv->db_filters, priv_node) {
if (db_filter->filter.rioid == filter.rioid &&
return -EEXIST;
}
- size = sizeof(struct rio_dev);
+ size = sizeof(*rdev);
mport = md->mport;
- destid = (u16)dev_info.destid;
- hopcount = (u8)dev_info.hopcount;
+ destid = dev_info.destid;
+ hopcount = dev_info.hopcount;
if (rio_mport_read_config_32(mport, destid, hopcount,
RIO_PEF_CAR, &rval))
do {
rdev = rio_get_comptag(dev_info.comptag, rdev);
if (rdev && rdev->dev.parent == &mport->net->dev &&
- rdev->destid == (u16)dev_info.destid &&
- rdev->hopcount == (u8)dev_info.hopcount)
+ rdev->destid == dev_info.destid &&
+ rdev->hopcount == dev_info.hopcount)
break;
} while (rdev);
}
return maint_port_idx_get(data, (void __user *)arg);
case RIO_MPORT_GET_PROPERTIES:
md->properties.hdid = md->mport->host_deviceid;
- if (copy_to_user((void __user *)arg, &(data->md->properties),
- sizeof(data->md->properties)))
+ if (copy_to_user((void __user *)arg, &(md->properties),
+ sizeof(md->properties)))
return -EFAULT;
return 0;
case RIO_ENABLE_DOORBELL_RANGE:
case RIO_DISABLE_PORTWRITE_RANGE:
return rio_mport_remove_pw_filter(data, (void __user *)arg);
case RIO_SET_EVENT_MASK:
- data->event_mask = arg;
+ data->event_mask = (u32)arg;
return 0;
case RIO_GET_EVENT_MASK:
if (copy_to_user((void __user *)arg, &data->event_mask,
- sizeof(data->event_mask)))
+ sizeof(u32)))
return -EFAULT;
return 0;
case RIO_MAP_OUTBOUND:
return -EINVAL;
ret = rio_mport_send_doorbell(mport,
- (u16)event.u.doorbell.rioid,
+ event.u.doorbell.rioid,
event.u.doorbell.payload);
if (ret < 0)
return ret;
struct mport_dev *md;
struct rio_mport_attr attr;
- md = kzalloc(sizeof(struct mport_dev), GFP_KERNEL);
+ md = kzalloc(sizeof(*md), GFP_KERNEL);
if (!md) {
rmcd_error("Unable allocate a device object");
return NULL;
/* The transfer_mode property will be returned through mport query
* interface
*/
-#ifdef CONFIG_PPC /* for now: only on Freescale's SoCs */
+#ifdef CONFIG_FSL_RIO /* for now: only on Freescale's SoCs */
md->properties.transfer_mode |= RIO_TRANSFER_MODE_MAPPED;
#else
md->properties.transfer_mode |= RIO_TRANSFER_MODE_TRANSFER;
/* Create device class needed by udev */
dev_class = class_create(THIS_MODULE, DRV_NAME);
- if (!dev_class) {
+ if (IS_ERR(dev_class)) {
rmcd_error("Unable to create " DRV_NAME " class");
- return -EINVAL;
+ return PTR_ERR(dev_class);
}
ret = alloc_chrdev_region(&dev_number, 0, RIO_MAX_MPORTS, DRV_NAME);
{
struct sclp_ctl_sccb ctl_sccb;
struct sccb_header *sccb;
+ unsigned long copied;
int rc;
if (copy_from_user(&ctl_sccb, user_area, sizeof(ctl_sccb)))
sccb = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
if (!sccb)
return -ENOMEM;
- if (copy_from_user(sccb, u64_to_uptr(ctl_sccb.sccb), sizeof(*sccb))) {
+ copied = PAGE_SIZE -
+ copy_from_user(sccb, u64_to_uptr(ctl_sccb.sccb), PAGE_SIZE);
+ if (offsetof(struct sccb_header, length) +
+ sizeof(sccb->length) > copied || sccb->length > copied) {
rc = -EFAULT;
goto out_free;
}
- if (sccb->length > PAGE_SIZE || sccb->length < 8)
- return -EINVAL;
- if (copy_from_user(sccb, u64_to_uptr(ctl_sccb.sccb), sccb->length)) {
- rc = -EFAULT;
+ if (sccb->length < 8) {
+ rc = -EINVAL;
goto out_free;
}
rc = sclp_sync_request(ctl_sccb.cmdw, sccb);
{
struct flowi6 fl;
+ memset(&fl, 0, sizeof(fl));
if (saddr)
memcpy(&fl.saddr, saddr, sizeof(struct in6_addr));
if (daddr)
genpd->dev_ops.active_wakeup = scpsys_active_wakeup;
/*
- * With CONFIG_PM disabled turn on all domains to make the
- * hardware usable.
+ * Initially turn on all domains to make the domains usable
+ * with !CONFIG_PM and to get the hardware in sync with the
+ * software. The unused domains will be switched off during
+ * late_init time.
*/
- if (!IS_ENABLED(CONFIG_PM))
- genpd->power_on(genpd);
+ genpd->power_on(genpd);
- pm_genpd_init(genpd, NULL, true);
+ pm_genpd_init(genpd, NULL, false);
}
/*
return per_cpu(cpu_spm_drv, cpu) ? 0 : -ENXIO;
}
-static struct cpuidle_ops qcom_cpuidle_ops __initdata = {
+static const struct cpuidle_ops qcom_cpuidle_ops __initconst = {
.suspend = qcom_idle_enter,
.init = qcom_cpuidle_init,
};
static int vpfe_update_pipe_state(struct vpfe_video_device *video)
{
struct vpfe_pipeline *pipe = &video->pipe;
+ int ret;
- if (vpfe_prepare_pipeline(video))
- return vpfe_prepare_pipeline(video);
+ ret = vpfe_prepare_pipeline(video);
+ if (ret)
+ return ret;
/*
* Find out if there is any input video
*/
if (pipe->input_num == 0) {
pipe->state = VPFE_PIPELINE_STREAM_CONTINUOUS;
- if (vpfe_update_current_ext_subdev(video)) {
+ ret = vpfe_update_current_ext_subdev(video);
+ if (ret) {
pr_err("Invalid external subdev\n");
- return vpfe_update_current_ext_subdev(video);
+ return ret;
}
} else {
pipe->state = VPFE_PIPELINE_STREAM_SINGLESHOT;
struct v4l2_subdev *subdev;
struct v4l2_format format;
struct media_pad *remote;
+ int ret;
v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_enum_fmt\n");
sd_fmt.pad = remote->index;
sd_fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
/* get output format of remote subdev */
- if (v4l2_subdev_call(subdev, pad, get_fmt, NULL, &sd_fmt)) {
+ ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &sd_fmt);
+ if (ret) {
v4l2_err(&vpfe_dev->v4l2_dev,
"invalid remote subdev for video node\n");
- return v4l2_subdev_call(subdev, pad, get_fmt, NULL, &sd_fmt);
+ return ret;
}
/* convert to pix format */
mbus.code = sd_fmt.format.code;
struct vpfe_video_device *video = video_drvdata(file);
struct vpfe_device *vpfe_dev = video->vpfe_dev;
struct v4l2_format format;
+ int ret;
v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_fmt\n");
/* If streaming is started, return error */
return -EBUSY;
}
/* get adjacent subdev's output pad format */
- if (__vpfe_video_get_format(video, &format))
- return __vpfe_video_get_format(video, &format);
+ ret = __vpfe_video_get_format(video, &format);
+ if (ret)
+ return ret;
*fmt = format;
video->fmt = *fmt;
return 0;
struct vpfe_video_device *video = video_drvdata(file);
struct vpfe_device *vpfe_dev = video->vpfe_dev;
struct v4l2_format format;
+ int ret;
v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_try_fmt\n");
/* get adjacent subdev's output pad format */
- if (__vpfe_video_get_format(video, &format))
- return __vpfe_video_get_format(video, &format);
+ ret = __vpfe_video_get_format(video, &format);
+ if (ret)
+ return ret;
*fmt = format;
return 0;
v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_input\n");
- if (mutex_lock_interruptible(&video->lock))
- return mutex_lock_interruptible(&video->lock);
+ ret = mutex_lock_interruptible(&video->lock);
+ if (ret)
+ return ret;
/*
* If streaming is started return device busy
* error
v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_s_std\n");
/* Call decoder driver function to set the standard */
- if (mutex_lock_interruptible(&video->lock))
- return mutex_lock_interruptible(&video->lock);
+ ret = mutex_lock_interruptible(&video->lock);
+ if (ret)
+ return ret;
sdinfo = video->current_ext_subdev;
/* If streaming is started, return device busy error */
if (video->started) {
return -EINVAL;
}
- if (mutex_lock_interruptible(&video->lock))
- return mutex_lock_interruptible(&video->lock);
+ ret = mutex_lock_interruptible(&video->lock);
+ if (ret)
+ return ret;
if (video->io_usrs != 0) {
v4l2_err(&vpfe_dev->v4l2_dev, "Only one IO user allowed\n");
q->buf_struct_size = sizeof(struct vpfe_cap_buffer);
q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
- if (vb2_queue_init(q)) {
+ ret = vb2_queue_init(q);
+ if (ret) {
v4l2_err(&vpfe_dev->v4l2_dev, "vb2_queue_init() failed\n");
vb2_dma_contig_cleanup_ctx(vpfe_dev->pdev);
- return vb2_queue_init(q);
+ return ret;
}
fh->io_allowed = 1;
return -EINVAL;
}
- if (mutex_lock_interruptible(&video->lock))
- return mutex_lock_interruptible(&video->lock);
+ ret = mutex_lock_interruptible(&video->lock);
+ if (ret)
+ return ret;
vpfe_stop_capture(video);
ret = vb2_streamoff(&video->buffer_queue, buf_type);
- Remove unneeded file entries in sysfs
- Remove software processing of IB protocol and place in library for use
by qib, ipath (if still present), hfi1, and eventually soft-roce
-
+- Replace incorrect uAPI
#include <linux/vmalloc.h>
#include <linux/io.h>
+#include <rdma/ib.h>
+
#include "hfi.h"
#include "pio.h"
#include "device.h"
int uctxt_required = 1;
int must_be_root = 0;
+ /* FIXME: This interface cannot continue out of staging */
+ if (WARN_ON_ONCE(!ib_safe_file_access(fp)))
+ return -EACCES;
+
if (count < sizeof(cmd)) {
ret = -EINVAL;
goto bail;
spin_unlock_irqrestore(&dd->uctxt_lock, flags);
dd->rcd[uctxt->ctxt] = NULL;
+
+ hfi1_user_exp_rcv_free(fdata);
+ hfi1_clear_ctxt_pkey(dd, uctxt->ctxt);
+
uctxt->rcvwait_to = 0;
uctxt->piowait_to = 0;
uctxt->rcvnowait = 0;
uctxt->pionowait = 0;
uctxt->event_flags = 0;
- hfi1_user_exp_rcv_free(fdata);
- hfi1_clear_ctxt_pkey(dd, uctxt->ctxt);
-
hfi1_stats.sps_ctxts--;
if (++dd->freectxts == dd->num_user_contexts)
aspm_enable_all(dd);
static int user_init(struct file *fp)
{
- int ret;
unsigned int rcvctrl_ops = 0;
struct hfi1_filedata *fd = fp->private_data;
struct hfi1_ctxtdata *uctxt = fd->uctxt;
/* make sure that the context has already been setup */
- if (!test_bit(HFI1_CTXT_SETUP_DONE, &uctxt->event_flags)) {
- ret = -EFAULT;
- goto done;
- }
-
- /*
- * Subctxts don't need to initialize anything since master
- * has done it.
- */
- if (fd->subctxt) {
- ret = wait_event_interruptible(uctxt->wait, !test_bit(
- HFI1_CTXT_MASTER_UNINIT,
- &uctxt->event_flags));
- goto expected;
- }
+ if (!test_bit(HFI1_CTXT_SETUP_DONE, &uctxt->event_flags))
+ return -EFAULT;
/* initialize poll variables... */
uctxt->urgent = 0;
wake_up(&uctxt->wait);
}
-expected:
- /*
- * Expected receive has to be setup for all processes (including
- * shared contexts). However, it has to be done after the master
- * context has been fully configured as it depends on the
- * eager/expected split of the RcvArray entries.
- * Setting it up here ensures that the subcontexts will be waiting
- * (due to the above wait_event_interruptible() until the master
- * is setup.
- */
- ret = hfi1_user_exp_rcv_init(fp);
-done:
- return ret;
+ return 0;
}
static int get_ctxt_info(struct file *fp, void __user *ubase, __u32 len)
int ret = 0;
/*
- * Context should be set up only once (including allocation and
+ * Context should be set up only once, including allocation and
* programming of eager buffers. This is done if context sharing
* is not requested or by the master process.
*/
if (ret)
goto done;
}
+ } else {
+ ret = wait_event_interruptible(uctxt->wait, !test_bit(
+ HFI1_CTXT_MASTER_UNINIT,
+ &uctxt->event_flags));
+ if (ret)
+ goto done;
}
+
ret = hfi1_user_sdma_alloc_queues(uctxt, fp);
+ if (ret)
+ goto done;
+ /*
+ * Expected receive has to be setup for all processes (including
+ * shared contexts). However, it has to be done after the master
+ * context has been fully configured as it depends on the
+ * eager/expected split of the RcvArray entries.
+ * Setting it up here ensures that the subcontexts will be waiting
+ * (due to the above wait_event_interruptible() until the master
+ * is setup.
+ */
+ ret = hfi1_user_exp_rcv_init(fp);
if (ret)
goto done;
{
struct hfi1_devdata *dd = filp->private_data;
- switch (whence) {
- case SEEK_SET:
- break;
- case SEEK_CUR:
- offset += filp->f_pos;
- break;
- case SEEK_END:
- offset = ((dd->kregend - dd->kregbase) + DC8051_DATA_MEM_SIZE) -
- offset;
- break;
- default:
- return -EINVAL;
- }
-
- if (offset < 0)
- return -EINVAL;
-
- if (offset >= (dd->kregend - dd->kregbase) + DC8051_DATA_MEM_SIZE)
- return -EINVAL;
-
- filp->f_pos = offset;
-
- return filp->f_pos;
+ return fixed_size_llseek(filp, offset, whence,
+ (dd->kregend - dd->kregbase) + DC8051_DATA_MEM_SIZE);
}
/* NOTE: assumes unsigned long is 8 bytes */
struct mm_struct *,
unsigned long, unsigned long);
static void mmu_notifier_mem_invalidate(struct mmu_notifier *,
+ struct mm_struct *,
unsigned long, unsigned long);
static struct mmu_rb_node *__mmu_rb_search(struct mmu_rb_handler *,
unsigned long, unsigned long);
rbnode = rb_entry(node, struct mmu_rb_node, node);
rb_erase(node, root);
if (handler->ops->remove)
- handler->ops->remove(root, rbnode, false);
+ handler->ops->remove(root, rbnode, NULL);
}
}
return ret;
}
-/* Caller must host handler lock */
+/* Caller must hold handler lock */
static struct mmu_rb_node *__mmu_rb_search(struct mmu_rb_handler *handler,
unsigned long addr,
unsigned long len)
return node;
}
+/* Caller must *not* hold handler lock. */
static void __mmu_rb_remove(struct mmu_rb_handler *handler,
- struct mmu_rb_node *node, bool arg)
+ struct mmu_rb_node *node, struct mm_struct *mm)
{
+ unsigned long flags;
+
/* Validity of handler and node pointers has been checked by caller. */
hfi1_cdbg(MMU, "Removing node addr 0x%llx, len %u", node->addr,
node->len);
+ spin_lock_irqsave(&handler->lock, flags);
__mmu_int_rb_remove(node, handler->root);
+ spin_unlock_irqrestore(&handler->lock, flags);
+
if (handler->ops->remove)
- handler->ops->remove(handler->root, node, arg);
+ handler->ops->remove(handler->root, node, mm);
}
struct mmu_rb_node *hfi1_mmu_rb_search(struct rb_root *root, unsigned long addr,
void hfi1_mmu_rb_remove(struct rb_root *root, struct mmu_rb_node *node)
{
struct mmu_rb_handler *handler = find_mmu_handler(root);
- unsigned long flags;
if (!handler || !node)
return;
- spin_lock_irqsave(&handler->lock, flags);
- __mmu_rb_remove(handler, node, false);
- spin_unlock_irqrestore(&handler->lock, flags);
+ __mmu_rb_remove(handler, node, NULL);
}
static struct mmu_rb_handler *find_mmu_handler(struct rb_root *root)
static inline void mmu_notifier_page(struct mmu_notifier *mn,
struct mm_struct *mm, unsigned long addr)
{
- mmu_notifier_mem_invalidate(mn, addr, addr + PAGE_SIZE);
+ mmu_notifier_mem_invalidate(mn, mm, addr, addr + PAGE_SIZE);
}
static inline void mmu_notifier_range_start(struct mmu_notifier *mn,
unsigned long start,
unsigned long end)
{
- mmu_notifier_mem_invalidate(mn, start, end);
+ mmu_notifier_mem_invalidate(mn, mm, start, end);
}
static void mmu_notifier_mem_invalidate(struct mmu_notifier *mn,
+ struct mm_struct *mm,
unsigned long start, unsigned long end)
{
struct mmu_rb_handler *handler =
container_of(mn, struct mmu_rb_handler, mn);
struct rb_root *root = handler->root;
- struct mmu_rb_node *node;
+ struct mmu_rb_node *node, *ptr = NULL;
unsigned long flags;
spin_lock_irqsave(&handler->lock, flags);
- for (node = __mmu_int_rb_iter_first(root, start, end - 1); node;
- node = __mmu_int_rb_iter_next(node, start, end - 1)) {
+ for (node = __mmu_int_rb_iter_first(root, start, end - 1);
+ node; node = ptr) {
+ /* Guard against node removal. */
+ ptr = __mmu_int_rb_iter_next(node, start, end - 1);
hfi1_cdbg(MMU, "Invalidating node addr 0x%llx, len %u",
node->addr, node->len);
- if (handler->ops->invalidate(root, node))
- __mmu_rb_remove(handler, node, true);
+ if (handler->ops->invalidate(root, node)) {
+ spin_unlock_irqrestore(&handler->lock, flags);
+ __mmu_rb_remove(handler, node, mm);
+ spin_lock_irqsave(&handler->lock, flags);
+ }
}
spin_unlock_irqrestore(&handler->lock, flags);
}
struct mmu_rb_ops {
bool (*filter)(struct mmu_rb_node *, unsigned long, unsigned long);
int (*insert)(struct rb_root *, struct mmu_rb_node *);
- void (*remove)(struct rb_root *, struct mmu_rb_node *, bool);
+ void (*remove)(struct rb_root *, struct mmu_rb_node *,
+ struct mm_struct *);
int (*invalidate)(struct rb_root *, struct mmu_rb_node *);
};
* do the flush work until that QP's
* sdma work has finished.
*/
+ spin_lock(&qp->s_lock);
if (qp->s_flags & RVT_S_WAIT_DMA) {
qp->s_flags &= ~RVT_S_WAIT_DMA;
hfi1_schedule_send(qp);
}
+ spin_unlock(&qp->s_lock);
}
/**
static int set_rcvarray_entry(struct file *, unsigned long, u32,
struct tid_group *, struct page **, unsigned);
static int mmu_rb_insert(struct rb_root *, struct mmu_rb_node *);
-static void mmu_rb_remove(struct rb_root *, struct mmu_rb_node *, bool);
+static void mmu_rb_remove(struct rb_root *, struct mmu_rb_node *,
+ struct mm_struct *);
static int mmu_rb_invalidate(struct rb_root *, struct mmu_rb_node *);
static int program_rcvarray(struct file *, unsigned long, struct tid_group *,
struct tid_pageset *, unsigned, u16, struct page **,
struct hfi1_ctxtdata *uctxt = fd->uctxt;
struct tid_group *grp, *gptr;
+ if (!test_bit(HFI1_CTXT_SETUP_DONE, &uctxt->event_flags))
+ return 0;
/*
* The notifier would have been removed when the process'es mm
* was freed.
if (!node || node->rcventry != (uctxt->expected_base + rcventry))
return -EBADF;
if (HFI1_CAP_IS_USET(TID_UNMAP))
- mmu_rb_remove(&fd->tid_rb_root, &node->mmu, false);
+ mmu_rb_remove(&fd->tid_rb_root, &node->mmu, NULL);
else
hfi1_mmu_rb_remove(&fd->tid_rb_root, &node->mmu);
continue;
if (HFI1_CAP_IS_USET(TID_UNMAP))
mmu_rb_remove(&fd->tid_rb_root,
- &node->mmu, false);
+ &node->mmu, NULL);
else
hfi1_mmu_rb_remove(&fd->tid_rb_root,
&node->mmu);
}
static void mmu_rb_remove(struct rb_root *root, struct mmu_rb_node *node,
- bool notifier)
+ struct mm_struct *mm)
{
struct hfi1_filedata *fdata =
container_of(root, struct hfi1_filedata, tid_rb_root);
static void user_sdma_free_request(struct user_sdma_request *, bool);
static int pin_vector_pages(struct user_sdma_request *,
struct user_sdma_iovec *);
-static void unpin_vector_pages(struct mm_struct *, struct page **, unsigned);
+static void unpin_vector_pages(struct mm_struct *, struct page **, unsigned,
+ unsigned);
static int check_header_template(struct user_sdma_request *,
struct hfi1_pkt_header *, u32, u32);
static int set_txreq_header(struct user_sdma_request *,
static void activate_packet_queue(struct iowait *, int);
static bool sdma_rb_filter(struct mmu_rb_node *, unsigned long, unsigned long);
static int sdma_rb_insert(struct rb_root *, struct mmu_rb_node *);
-static void sdma_rb_remove(struct rb_root *, struct mmu_rb_node *, bool);
+static void sdma_rb_remove(struct rb_root *, struct mmu_rb_node *,
+ struct mm_struct *);
static int sdma_rb_invalidate(struct rb_root *, struct mmu_rb_node *);
static struct mmu_rb_ops sdma_rb_ops = {
rb_node = hfi1_mmu_rb_search(&pq->sdma_rb_root,
(unsigned long)iovec->iov.iov_base,
iovec->iov.iov_len);
- if (rb_node)
+ if (rb_node && !IS_ERR(rb_node))
node = container_of(rb_node, struct sdma_mmu_node, rb);
+ else
+ rb_node = NULL;
if (!node) {
node = kzalloc(sizeof(*node), GFP_KERNEL);
goto bail;
}
if (pinned != npages) {
- unpin_vector_pages(current->mm, pages, pinned);
+ unpin_vector_pages(current->mm, pages, node->npages,
+ pinned);
ret = -EFAULT;
goto bail;
}
}
static void unpin_vector_pages(struct mm_struct *mm, struct page **pages,
- unsigned npages)
+ unsigned start, unsigned npages)
{
- hfi1_release_user_pages(mm, pages, npages, 0);
+ hfi1_release_user_pages(mm, pages + start, npages, 0);
kfree(pages);
}
&req->pq->sdma_rb_root,
(unsigned long)req->iovs[i].iov.iov_base,
req->iovs[i].iov.iov_len);
- if (!mnode)
+ if (!mnode || IS_ERR(mnode))
continue;
node = container_of(mnode, struct sdma_mmu_node, rb);
}
static void sdma_rb_remove(struct rb_root *root, struct mmu_rb_node *mnode,
- bool notifier)
+ struct mm_struct *mm)
{
struct sdma_mmu_node *node =
container_of(mnode, struct sdma_mmu_node, rb);
node->pq->n_locked -= node->npages;
spin_unlock(&node->pq->evict_lock);
- unpin_vector_pages(notifier ? NULL : current->mm, node->pages,
+ /*
+ * If mm is set, we are being called by the MMU notifier and we
+ * should not pass a mm_struct to unpin_vector_page(). This is to
+ * prevent a deadlock when hfi1_release_user_pages() attempts to
+ * take the mmap_sem, which the MMU notifier has already taken.
+ */
+ unpin_vector_pages(mm ? NULL : current->mm, node->pages, 0,
node->npages);
/*
* If called by the MMU notifier, we have to adjust the pinned
* page count ourselves.
*/
- if (notifier)
- current->mm->pinned_vm -= node->npages;
+ if (mm)
+ mm->pinned_vm -= node->npages;
kfree(node);
}
* Every step equals (1 * 200) / 255 celsius, and finally
* need convert to millicelsius.
*/
- return (HISI_TEMP_BASE + (step * 200 / 255)) * 1000;
+ return (HISI_TEMP_BASE * 1000 + (step * 200000 / 255));
}
static inline long _temp_to_step(long temp)
{
- return ((temp / 1000 - HISI_TEMP_BASE) * 255 / 200);
+ return ((temp - HISI_TEMP_BASE * 1000) * 255) / 200000;
}
static long hisi_thermal_get_sensor_temp(struct hisi_thermal_data *data,
struct thermal_zone_device *tz = to_thermal_zone(dev); \
\
if (tz->tzp) \
- return sprintf(buf, "%u\n", tz->tzp->name); \
+ return sprintf(buf, "%d\n", tz->tzp->name); \
else \
return -EIO; \
} \
*/
static struct tty_struct *ptm_unix98_lookup(struct tty_driver *driver,
- struct inode *ptm_inode, int idx)
+ struct file *file, int idx)
{
/* Master must be open via /dev/ptmx */
return ERR_PTR(-EIO);
*/
static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver,
- struct inode *pts_inode, int idx)
+ struct file *file, int idx)
{
struct tty_struct *tty;
mutex_lock(&devpts_mutex);
- tty = devpts_get_priv(pts_inode);
+ tty = devpts_get_priv(file->f_path.dentry);
mutex_unlock(&devpts_mutex);
/* Master must be open before slave */
if (!tty)
{
struct pts_fs_info *fsi;
struct tty_struct *tty;
- struct inode *slave_inode;
+ struct dentry *dentry;
int retval;
int index;
tty_add_file(tty, filp);
- slave_inode = devpts_pty_new(fsi,
- MKDEV(UNIX98_PTY_SLAVE_MAJOR, index), index,
- tty->link);
- if (IS_ERR(slave_inode)) {
- retval = PTR_ERR(slave_inode);
+ dentry = devpts_pty_new(fsi, index, tty->link);
+ if (IS_ERR(dentry)) {
+ retval = PTR_ERR(dentry);
goto err_release;
}
- tty->link->driver_data = slave_inode;
+ tty->link->driver_data = dentry;
retval = ptm_driver->ops->open(tty, filp);
if (retval)
* Locking: tty_mutex must be held. If the tty is found, bump the tty kref.
*/
static struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver,
- struct inode *inode, int idx)
+ struct file *file, int idx)
{
struct tty_struct *tty;
if (driver->ops->lookup)
- tty = driver->ops->lookup(driver, inode, idx);
+ tty = driver->ops->lookup(driver, file, idx);
else
tty = driver->ttys[idx];
}
/* check whether we're reopening an existing tty */
- tty = tty_driver_lookup_tty(driver, inode, index);
+ tty = tty_driver_lookup_tty(driver, filp, index);
if (IS_ERR(tty)) {
mutex_unlock(&tty_mutex);
goto out;
return retval;
}
-
-static int usb_port_prepare(struct device *dev)
-{
- return 1;
-}
#endif
static const struct dev_pm_ops usb_port_pm_ops = {
#ifdef CONFIG_PM
.runtime_suspend = usb_port_runtime_suspend,
.runtime_resume = usb_port_runtime_resume,
- .prepare = usb_port_prepare,
#endif
};
static int usb_dev_prepare(struct device *dev)
{
- struct usb_device *udev = to_usb_device(dev);
-
- /* Return 0 if the current wakeup setting is wrong, otherwise 1 */
- if (udev->do_remote_wakeup != device_may_wakeup(dev))
- return 0;
-
- return 1;
+ return 0; /* Implement eventually? */
}
static void usb_dev_complete(struct device *dev)
{
usb_phy_generic_register();
musb->xceiv = usb_get_phy(USB_PHY_TYPE_USB2);
- if (!musb->xceiv) {
+ if (IS_ERR(musb->xceiv)) {
pr_err("HS UDC: no transceiver configured\n");
- return -ENODEV;
+ return PTR_ERR(musb->xceiv);
}
/* Silicon does not implement ConfigData register.
musb_writew(epio, MUSB_RXMAXP, 0);
}
- musb_ep->desc = NULL;
- musb_ep->end_point.desc = NULL;
-
/* abort all pending DMA and requests */
nuke(musb_ep, -ESHUTDOWN);
+ musb_ep->desc = NULL;
+ musb_ep->end_point.desc = NULL;
+
schedule_work(&musb->irq_work);
spin_unlock_irqrestore(&(musb->lock), flags);
.description = "musb-hcd",
.product_desc = "MUSB HDRC host driver",
.hcd_priv_size = sizeof(struct musb *),
- .flags = HCD_USB2 | HCD_MEMORY | HCD_BH,
+ .flags = HCD_USB2 | HCD_MEMORY,
/* not using irq handler or reset hooks from usbcore, since
* those must be shared with peripheral code for OTG configs
{ USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
{ USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */
{ USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */
+ { USB_DEVICE(0x10C4, 0x82F4) }, /* Starizona MicroTouch */
{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
{ USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
{ USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */
{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
{ USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
+ { USB_DEVICE(0x10C4, 0x84B6) }, /* Starizona Hyperion */
{ USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */
{ USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */
{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
{ USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
{ USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
{ USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
+ { USB_DEVICE(0x12B8, 0xEC60) }, /* Link G4 ECU */
+ { USB_DEVICE(0x12B8, 0xEC62) }, /* Link G4+ ECU */
{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
{ USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */
const char *name)
{
struct virtqueue *vq;
- void *queue;
+ void *queue = NULL;
dma_addr_t dma_addr;
size_t queue_size_in_bytes;
struct vring vring;
static void balloon_process(struct work_struct *work);
static DECLARE_DELAYED_WORK(balloon_worker, balloon_process);
+static void release_memory_resource(struct resource *resource);
+
/* When ballooning out (allocating memory to return to Xen) we don't really
want the kernel to try too hard since that can trigger the oom killer. */
#define GFP_BALLOON \
return NULL;
}
+#ifdef CONFIG_SPARSEMEM
+ {
+ unsigned long limit = 1UL << (MAX_PHYSMEM_BITS - PAGE_SHIFT);
+ unsigned long pfn = res->start >> PAGE_SHIFT;
+
+ if (pfn > limit) {
+ pr_err("New System RAM resource outside addressable RAM (%lu > %lu)\n",
+ pfn, limit);
+ release_memory_resource(res);
+ return NULL;
+ }
+ }
+#endif
+
return res;
}
{
unsigned int new_size;
evtchn_port_t *new_ring, *old_ring;
- unsigned int p, c;
/*
* Ensure the ring is large enough to capture all possible
/*
* Copy the old ring contents to the new ring.
*
- * If the ring contents crosses the end of the current ring,
- * it needs to be copied in two chunks.
+ * To take care of wrapping, a full ring, and the new index
+ * pointing into the second half, simply copy the old contents
+ * twice.
*
* +---------+ +------------------+
- * |34567 12| -> | 1234567 |
- * +-----p-c-+ +------------------+
+ * |34567 12| -> |34567 1234567 12|
+ * +-----p-c-+ +-------c------p---+
*/
- p = evtchn_ring_offset(u, u->ring_prod);
- c = evtchn_ring_offset(u, u->ring_cons);
- if (p < c) {
- memcpy(new_ring + c, u->ring + c, (u->ring_size - c) * sizeof(*u->ring));
- memcpy(new_ring + u->ring_size, u->ring, p * sizeof(*u->ring));
- } else
- memcpy(new_ring + c, u->ring + c, (p - c) * sizeof(*u->ring));
+ memcpy(new_ring, old_ring, u->ring_size * sizeof(*u->ring));
+ memcpy(new_ring + u->ring_size, old_ring,
+ u->ring_size * sizeof(*u->ring));
u->ring = new_ring;
u->ring_size = new_size;
atomic_read(&s->s_ref), atomic_read(&s->s_ref)-1);
if (atomic_dec_and_test(&s->s_ref)) {
if (s->s_auth.authorizer)
- ceph_auth_destroy_authorizer(
- s->s_mdsc->fsc->client->monc.auth,
- s->s_auth.authorizer);
+ ceph_auth_destroy_authorizer(s->s_auth.authorizer);
kfree(s);
}
}
struct ceph_auth_handshake *auth = &s->s_auth;
if (force_new && auth->authorizer) {
- ceph_auth_destroy_authorizer(ac, auth->authorizer);
+ ceph_auth_destroy_authorizer(auth->authorizer);
auth->authorizer = NULL;
}
if (!auth->authorizer) {
*
* The created inode is returned. Remove it from /dev/pts/ by devpts_pty_kill.
*/
-struct inode *devpts_pty_new(struct pts_fs_info *fsi, dev_t device, int index,
- void *priv)
+struct dentry *devpts_pty_new(struct pts_fs_info *fsi, int index, void *priv)
{
struct dentry *dentry;
struct super_block *sb;
inode->i_uid = opts->setuid ? opts->uid : current_fsuid();
inode->i_gid = opts->setgid ? opts->gid : current_fsgid();
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
- init_special_inode(inode, S_IFCHR|opts->mode, device);
- inode->i_private = priv;
+ init_special_inode(inode, S_IFCHR|opts->mode, MKDEV(UNIX98_PTY_SLAVE_MAJOR, index));
sprintf(s, "%d", index);
- inode_lock(d_inode(root));
-
dentry = d_alloc_name(root, s);
if (dentry) {
+ dentry->d_fsdata = priv;
d_add(dentry, inode);
fsnotify_create(d_inode(root), dentry);
} else {
iput(inode);
- inode = ERR_PTR(-ENOMEM);
+ dentry = ERR_PTR(-ENOMEM);
}
- inode_unlock(d_inode(root));
-
- return inode;
+ return dentry;
}
/**
*
* Returns whatever was passed as priv in devpts_pty_new for a given inode.
*/
-void *devpts_get_priv(struct inode *pts_inode)
+void *devpts_get_priv(struct dentry *dentry)
{
- struct dentry *dentry;
- void *priv = NULL;
-
- BUG_ON(pts_inode->i_rdev == MKDEV(TTYAUX_MAJOR, PTMX_MINOR));
-
- /* Ensure dentry has not been deleted by devpts_pty_kill() */
- dentry = d_find_alias(pts_inode);
- if (!dentry)
- return NULL;
-
- if (pts_inode->i_sb->s_magic == DEVPTS_SUPER_MAGIC)
- priv = pts_inode->i_private;
-
- dput(dentry);
-
- return priv;
+ WARN_ON_ONCE(dentry->d_sb->s_magic != DEVPTS_SUPER_MAGIC);
+ return dentry->d_fsdata;
}
/**
*
* This is an inverse operation of devpts_pty_new.
*/
-void devpts_pty_kill(struct inode *inode)
+void devpts_pty_kill(struct dentry *dentry)
{
- struct super_block *sb = pts_sb_from_inode(inode);
- struct dentry *root = sb->s_root;
- struct dentry *dentry;
+ WARN_ON_ONCE(dentry->d_sb->s_magic != DEVPTS_SUPER_MAGIC);
- BUG_ON(inode->i_rdev == MKDEV(TTYAUX_MAJOR, PTMX_MINOR));
-
- inode_lock(d_inode(root));
-
- dentry = d_find_alias(inode);
-
- drop_nlink(inode);
+ dentry->d_fsdata = NULL;
+ drop_nlink(dentry->d_inode);
d_delete(dentry);
dput(dentry); /* d_alloc_name() in devpts_pty_new() */
- dput(dentry); /* d_find_alias above */
-
- inode_unlock(d_inode(root));
}
static int __init init_devpts_fs(void)
*nbytesp = nbytes;
- return ret;
+ return ret < 0 ? ret : 0;
}
static inline int fuse_iter_npages(const struct iov_iter *ii_p)
spin_unlock(&dlm->spinlock);
+ ret = 0;
+
done:
dlm_put(dlm);
return ret;
/* all accesses are serialized by namespace_sem */
static struct user_namespace *user_ns;
-static struct mount *last_dest, *last_source, *dest_master;
+static struct mount *last_dest, *first_source, *last_source, *dest_master;
static struct mountpoint *mp;
static struct hlist_head *list;
type = CL_MAKE_SHARED;
} else {
struct mount *n, *p;
+ bool done;
for (n = m; ; n = p) {
p = n->mnt_master;
- if (p == dest_master || IS_MNT_MARKED(p)) {
- while (last_dest->mnt_master != p) {
- last_source = last_source->mnt_master;
- last_dest = last_source->mnt_parent;
- }
- if (!peers(n, last_dest)) {
- last_source = last_source->mnt_master;
- last_dest = last_source->mnt_parent;
- }
+ if (p == dest_master || IS_MNT_MARKED(p))
break;
- }
}
+ do {
+ struct mount *parent = last_source->mnt_parent;
+ if (last_source == first_source)
+ break;
+ done = parent->mnt_master == p;
+ if (done && peers(n, parent))
+ break;
+ last_source = last_source->mnt_master;
+ } while (!done);
+
type = CL_SLAVE;
/* beginning of peer group among the slaves? */
if (IS_MNT_SHARED(m))
*/
user_ns = current->nsproxy->mnt_ns->user_ns;
last_dest = dest_mnt;
+ first_source = source_mnt;
last_source = source_mnt;
mp = dest_mp;
list = tree_list;
struct mm_struct *mm = file->private_data;
unsigned long env_start, env_end;
- if (!mm)
+ /* Ensure the process spawned far enough to have an environment. */
+ if (!mm || !mm->env_end)
return 0;
page = (char *)__get_free_page(GFP_TEMPORARY);
return page;
}
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+static struct page *can_gather_numa_stats_pmd(pmd_t pmd,
+ struct vm_area_struct *vma,
+ unsigned long addr)
+{
+ struct page *page;
+ int nid;
+
+ if (!pmd_present(pmd))
+ return NULL;
+
+ page = vm_normal_page_pmd(vma, addr, pmd);
+ if (!page)
+ return NULL;
+
+ if (PageReserved(page))
+ return NULL;
+
+ nid = page_to_nid(page);
+ if (!node_isset(nid, node_states[N_MEMORY]))
+ return NULL;
+
+ return page;
+}
+#endif
+
static int gather_pte_stats(pmd_t *pmd, unsigned long addr,
unsigned long end, struct mm_walk *walk)
{
pte_t *orig_pte;
pte_t *pte;
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
ptl = pmd_trans_huge_lock(pmd, vma);
if (ptl) {
- pte_t huge_pte = *(pte_t *)pmd;
struct page *page;
- page = can_gather_numa_stats(huge_pte, vma, addr);
+ page = can_gather_numa_stats_pmd(*pmd, vma, addr);
if (page)
- gather_stats(page, md, pte_dirty(huge_pte),
+ gather_stats(page, md, pmd_dirty(*pmd),
HPAGE_PMD_SIZE/PAGE_SIZE);
spin_unlock(ptl);
return 0;
if (pmd_trans_unstable(pmd))
return 0;
+#endif
orig_pte = pte = pte_offset_map_lock(walk->mm, pmd, addr, &ptl);
do {
struct page *page = can_gather_numa_stats(*pte, vma, addr);
#endif
}
- ret = udf_CS0toUTF8(outstr, 31, pvoldesc->volIdent, 32);
+ ret = udf_dstrCS0toUTF8(outstr, 31, pvoldesc->volIdent, 32);
if (ret < 0)
goto out_bh;
strncpy(UDF_SB(sb)->s_volume_ident, outstr, ret);
udf_debug("volIdent[] = '%s'\n", UDF_SB(sb)->s_volume_ident);
- ret = udf_CS0toUTF8(outstr, 127, pvoldesc->volSetIdent, 128);
+ ret = udf_dstrCS0toUTF8(outstr, 127, pvoldesc->volSetIdent, 128);
if (ret < 0)
goto out_bh;
uint8_t *, int);
extern int udf_put_filename(struct super_block *, const uint8_t *, int,
uint8_t *, int);
-extern int udf_CS0toUTF8(uint8_t *, int, const uint8_t *, int);
+extern int udf_dstrCS0toUTF8(uint8_t *, int, const uint8_t *, int);
/* ialloc.c */
extern void udf_free_inode(struct inode *);
return u_len;
}
-int udf_CS0toUTF8(uint8_t *utf_o, int o_len, const uint8_t *ocu_i, int i_len)
+int udf_dstrCS0toUTF8(uint8_t *utf_o, int o_len,
+ const uint8_t *ocu_i, int i_len)
{
- return udf_name_from_CS0(utf_o, o_len, ocu_i, i_len,
+ int s_len = 0;
+
+ if (i_len > 0) {
+ s_len = ocu_i[i_len - 1];
+ if (s_len >= i_len) {
+ pr_err("incorrect dstring lengths (%d/%d)\n",
+ s_len, i_len);
+ return -EINVAL;
+ }
+ }
+
+ return udf_name_from_CS0(utf_o, o_len, ocu_i, s_len,
udf_uni2char_utf8, 0);
}
static inline bool is_acpi_node(struct fwnode_handle *fwnode)
{
- return fwnode && (fwnode->type == FWNODE_ACPI
+ return !IS_ERR_OR_NULL(fwnode) && (fwnode->type == FWNODE_ACPI
|| fwnode->type == FWNODE_ACPI_DATA);
}
static inline bool is_acpi_device_node(struct fwnode_handle *fwnode)
{
- return fwnode && fwnode->type == FWNODE_ACPI;
+ return !IS_ERR_OR_NULL(fwnode) && fwnode->type == FWNODE_ACPI;
}
static inline struct acpi_device *to_acpi_device_node(struct fwnode_handle *fwnode)
void bpf_register_map_type(struct bpf_map_type_list *tl);
struct bpf_prog *bpf_prog_get(u32 ufd);
+struct bpf_prog *bpf_prog_inc(struct bpf_prog *prog);
void bpf_prog_put(struct bpf_prog *prog);
void bpf_prog_put_rcu(struct bpf_prog *prog);
struct bpf_map *bpf_map_get_with_uref(u32 ufd);
struct bpf_map *__bpf_map_get(struct fd f);
-void bpf_map_inc(struct bpf_map *map, bool uref);
+struct bpf_map *bpf_map_inc(struct bpf_map *map, bool uref);
void bpf_map_put_with_uref(struct bpf_map *map);
void bpf_map_put(struct bpf_map *map);
int bpf_map_precharge_memlock(u32 pages);
*/
struct ceph_auth_client;
-struct ceph_authorizer;
struct ceph_msg;
+struct ceph_authorizer {
+ void (*destroy)(struct ceph_authorizer *);
+};
+
struct ceph_auth_handshake {
struct ceph_authorizer *authorizer;
void *authorizer_buf;
struct ceph_auth_handshake *auth);
int (*verify_authorizer_reply)(struct ceph_auth_client *ac,
struct ceph_authorizer *a, size_t len);
- void (*destroy_authorizer)(struct ceph_auth_client *ac,
- struct ceph_authorizer *a);
void (*invalidate_authorizer)(struct ceph_auth_client *ac,
int peer_type);
extern int ceph_auth_create_authorizer(struct ceph_auth_client *ac,
int peer_type,
struct ceph_auth_handshake *auth);
-extern void ceph_auth_destroy_authorizer(struct ceph_auth_client *ac,
- struct ceph_authorizer *a);
+void ceph_auth_destroy_authorizer(struct ceph_authorizer *a);
extern int ceph_auth_update_authorizer(struct ceph_auth_client *ac,
int peer_type,
struct ceph_auth_handshake *a);
struct ceph_snap_context;
struct ceph_osd_request;
struct ceph_osd_client;
-struct ceph_authorizer;
/*
* completion callback for async writepages
int (*can_attach)(struct cgroup_taskset *tset);
void (*cancel_attach)(struct cgroup_taskset *tset);
void (*attach)(struct cgroup_taskset *tset);
+ void (*post_attach)(void);
int (*can_fork)(struct task_struct *task);
void (*cancel_fork)(struct task_struct *task);
void (*fork)(struct task_struct *task);
+++ /dev/null
-/*
- * Copyright (C) 2014 Marvell
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __CPUFREQ_DT_H__
-#define __CPUFREQ_DT_H__
-
-struct cpufreq_dt_platform_data {
- /*
- * True when each CPU has its own clock to control its
- * frequency, false when all CPUs are controlled by a single
- * clock.
- */
- bool independent_clocks;
-};
-
-#endif /* __CPUFREQ_DT_H__ */
*/
struct rw_semaphore rwsem;
+ /*
+ * Fast switch flags:
+ * - fast_switch_possible should be set by the driver if it can
+ * guarantee that frequency can be changed on any CPU sharing the
+ * policy and that the change will affect all of the policy CPUs then.
+ * - fast_switch_enabled is to be set by governors that support fast
+ * freqnency switching with the help of cpufreq_enable_fast_switch().
+ */
+ bool fast_switch_possible;
+ bool fast_switch_enabled;
+
/* Synchronization for frequency transitions */
bool transition_ongoing; /* Tracks transition status */
spinlock_t transition_lock;
int cpufreq_update_policy(unsigned int cpu);
bool have_governor_per_policy(void);
struct kobject *get_governor_parent_kobj(struct cpufreq_policy *policy);
+void cpufreq_enable_fast_switch(struct cpufreq_policy *policy);
+void cpufreq_disable_fast_switch(struct cpufreq_policy *policy);
#else
static inline unsigned int cpufreq_get(unsigned int cpu)
{
unsigned int relation); /* Deprecated */
int (*target_index)(struct cpufreq_policy *policy,
unsigned int index);
+ unsigned int (*fast_switch)(struct cpufreq_policy *policy,
+ unsigned int target_freq);
/*
* Only for drivers with target_index() and CPUFREQ_ASYNC_NOTIFICATION
* unset.
#define CPUFREQ_POLICY_POWERSAVE (1)
#define CPUFREQ_POLICY_PERFORMANCE (2)
+/*
+ * The polling frequency depends on the capability of the processor. Default
+ * polling frequency is 1000 times the transition latency of the processor. The
+ * ondemand governor will work on any processor with transition latency <= 10ms,
+ * using appropriate sampling rate.
+ *
+ * For CPUs with transition latency > 10ms (mostly drivers with CPUFREQ_ETERNAL)
+ * the ondemand governor will not work. All times here are in us (microseconds).
+ */
+#define MIN_SAMPLING_RATE_RATIO (2)
+#define LATENCY_MULTIPLIER (1000)
+#define MIN_LATENCY_MULTIPLIER (20)
+#define TRANSITION_LATENCY_LIMIT (10 * 1000 * 1000)
+
/* Governor Events */
#define CPUFREQ_GOV_START 1
#define CPUFREQ_GOV_STOP 2
};
/* Pass a target to the cpufreq driver */
+unsigned int cpufreq_driver_fast_switch(struct cpufreq_policy *policy,
+ unsigned int target_freq);
int cpufreq_driver_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation);
struct cpufreq_governor *cpufreq_default_governor(void);
struct cpufreq_governor *cpufreq_fallback_governor(void);
+/* Governor attribute set */
+struct gov_attr_set {
+ struct kobject kobj;
+ struct list_head policy_list;
+ struct mutex update_lock;
+ int usage_count;
+};
+
+/* sysfs ops for cpufreq governors */
+extern const struct sysfs_ops governor_sysfs_ops;
+
+void gov_attr_set_init(struct gov_attr_set *attr_set, struct list_head *list_node);
+void gov_attr_set_get(struct gov_attr_set *attr_set, struct list_head *list_node);
+unsigned int gov_attr_set_put(struct gov_attr_set *attr_set, struct list_head *list_node);
+
+/* Governor sysfs attribute */
+struct governor_attr {
+ struct attribute attr;
+ ssize_t (*show)(struct gov_attr_set *attr_set, char *buf);
+ ssize_t (*store)(struct gov_attr_set *attr_set, const char *buf,
+ size_t count);
+};
+
/*********************************************************************
* FREQUENCY TABLE HELPERS *
*********************************************************************/
task_unlock(current);
}
-extern void cpuset_post_attach_flush(void);
-
#else /* !CONFIG_CPUSETS */
static inline bool cpusets_enabled(void) { return false; }
return false;
}
-static inline void cpuset_post_attach_flush(void)
-{
-}
-
#endif /* !CONFIG_CPUSETS */
#endif /* _LINUX_CPUSET_H */
#define DEVFREQ_NAME_LEN 16
+/* DEVFREQ notifier interface */
+#define DEVFREQ_TRANSITION_NOTIFIER (0)
+
+/* Transition notifiers of DEVFREQ_TRANSITION_NOTIFIER */
+#define DEVFREQ_PRECHANGE (0)
+#define DEVFREQ_POSTCHANGE (1)
+
struct devfreq;
/**
* @trans_table: Statistics of devfreq transitions
* @time_in_state: Statistics of devfreq states
* @last_stat_updated: The last time stat updated
+ * @transition_notifier_list: list head of DEVFREQ_TRANSITION_NOTIFIER notifier
*
* This structure stores the devfreq information for a give device.
*
unsigned int *trans_table;
unsigned long *time_in_state;
unsigned long last_stat_updated;
+
+ struct srcu_notifier_head transition_notifier_list;
+};
+
+struct devfreq_freqs {
+ unsigned long old;
+ unsigned long new;
};
#if defined(CONFIG_PM_DEVFREQ)
struct devfreq *devfreq);
extern void devm_devfreq_unregister_opp_notifier(struct device *dev,
struct devfreq *devfreq);
+extern int devfreq_register_notifier(struct devfreq *devfreq,
+ struct notifier_block *nb,
+ unsigned int list);
+extern int devfreq_unregister_notifier(struct devfreq *devfreq,
+ struct notifier_block *nb,
+ unsigned int list);
+extern int devm_devfreq_register_notifier(struct device *dev,
+ struct devfreq *devfreq,
+ struct notifier_block *nb,
+ unsigned int list);
+extern void devm_devfreq_unregister_notifier(struct device *dev,
+ struct devfreq *devfreq,
+ struct notifier_block *nb,
+ unsigned int list);
+extern struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev,
+ int index);
/**
* devfreq_update_stats() - update the last_status pointer in struct devfreq
};
#endif
+#if IS_ENABLED(CONFIG_DEVFREQ_GOV_PASSIVE)
+/**
+ * struct devfreq_passive_data - void *data fed to struct devfreq
+ * and devfreq_add_device
+ * @parent: the devfreq instance of parent device.
+ * @get_target_freq: Optional callback, Returns desired operating frequency
+ * for the device using passive governor. That is called
+ * when passive governor should decide the next frequency
+ * by using the new frequency of parent devfreq device
+ * using governors except for passive governor.
+ * If the devfreq device has the specific method to decide
+ * the next frequency, should use this callback.
+ * @this: the devfreq instance of own device.
+ * @nb: the notifier block for DEVFREQ_TRANSITION_NOTIFIER list
+ *
+ * The devfreq_passive_data have to set the devfreq instance of parent
+ * device with governors except for the passive governor. But, don't need to
+ * initialize the 'this' and 'nb' field because the devfreq core will handle
+ * them.
+ */
+struct devfreq_passive_data {
+ /* Should set the devfreq instance of parent device */
+ struct devfreq *parent;
+
+ /* Optional callback to decide the next frequency of passvice device */
+ int (*get_target_freq)(struct devfreq *this, unsigned long *freq);
+
+ /* For passive governor's internal use. Don't need to set them */
+ struct devfreq *this;
+ struct notifier_block nb;
+};
+#endif
+
#else /* !CONFIG_PM_DEVFREQ */
static inline struct devfreq *devfreq_add_device(struct device *dev,
struct devfreq_dev_profile *profile,
{
}
+static inline int devfreq_register_notifier(struct devfreq *devfreq,
+ struct notifier_block *nb,
+ unsigned int list)
+{
+ return 0;
+}
+
+static inline int devfreq_unregister_notifier(struct devfreq *devfreq,
+ struct notifier_block *nb,
+ unsigned int list)
+{
+ return 0;
+}
+
+static inline int devm_devfreq_register_notifier(struct device *dev,
+ struct devfreq *devfreq,
+ struct notifier_block *nb,
+ unsigned int list)
+{
+ return 0;
+}
+
+static inline void devm_devfreq_unregister_notifier(struct device *dev,
+ struct devfreq *devfreq,
+ struct notifier_block *nb,
+ unsigned int list)
+{
+}
+
+static inline struct devfreq *devfreq_get_devfreq_by_phandle(struct device *dev,
+ int index)
+{
+ return ERR_PTR(-ENODEV);
+}
+
static inline int devfreq_update_stats(struct devfreq *df)
{
return -EINVAL;
return !!dev->power.async_suspend;
}
-static inline void pm_suspend_ignore_children(struct device *dev, bool enable)
-{
- dev->power.ignore_children = enable;
-}
-
static inline void dev_pm_syscore_device(struct device *dev, bool val)
{
#ifdef CONFIG_PM_SLEEP
void devpts_kill_index(struct pts_fs_info *, int);
/* mknod in devpts */
-struct inode *devpts_pty_new(struct pts_fs_info *, dev_t, int, void *);
+struct dentry *devpts_pty_new(struct pts_fs_info *, int, void *);
/* get private structure */
-void *devpts_get_priv(struct inode *pts_inode);
+void *devpts_get_priv(struct dentry *);
/* unlink */
-void devpts_pty_kill(struct inode *inode);
+void devpts_pty_kill(struct dentry *);
#endif
#error Wordsize not 32 or 64
#endif
+/*
+ * The above primes are actively bad for hashing, since they are
+ * too sparse. The 32-bit one is mostly ok, the 64-bit one causes
+ * real problems. Besides, the "prime" part is pointless for the
+ * multiplicative hash.
+ *
+ * Although a random odd number will do, it turns out that the golden
+ * ratio phi = (sqrt(5)-1)/2, or its negative, has particularly nice
+ * properties.
+ *
+ * These are the negative, (1 - phi) = (phi^2) = (3 - sqrt(5))/2.
+ * (See Knuth vol 3, section 6.4, exercise 9.)
+ */
+#define GOLDEN_RATIO_32 0x61C88647
+#define GOLDEN_RATIO_64 0x61C8864680B583EBull
+
static __always_inline u64 hash_64(u64 val, unsigned int bits)
{
u64 hash = val;
-#if defined(CONFIG_ARCH_HAS_FAST_MULTIPLIER) && BITS_PER_LONG == 64
- hash = hash * GOLDEN_RATIO_PRIME_64;
+#if BITS_PER_LONG == 64
+ hash = hash * GOLDEN_RATIO_64;
#else
/* Sigh, gcc can't optimise this alone like it does for 32 bits. */
u64 n = hash;
}
struct page *get_huge_zero_page(void);
+void put_huge_zero_page(void);
#else /* CONFIG_TRANSPARENT_HUGEPAGE */
#define HPAGE_PMD_SHIFT ({ BUILD_BUG(); 0; })
return false;
}
+static inline void put_huge_zero_page(void)
+{
+ BUILD_BUG();
+}
static inline struct page *follow_devmap_pmd(struct vm_area_struct *vma,
unsigned long addr, pmd_t *pmd, int flags)
return (struct ethhdr *)skb_mac_header(skb);
}
+static inline struct ethhdr *inner_eth_hdr(const struct sk_buff *skb)
+{
+ return (struct ethhdr *)skb_inner_mac_header(skb);
+}
+
int eth_header_parse(const struct sk_buff *skb, unsigned char *haddr);
extern ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len);
* We record lock dependency chains, so that we can cache them:
*/
struct lock_chain {
- u8 irq_context;
- u8 depth;
- u16 base;
+ /* see BUILD_BUG_ON()s in lookup_chain_cache() */
+ unsigned int irq_context : 2,
+ depth : 6,
+ base : 24;
+ /* 4 byte hole */
struct hlist_node entry;
u64 chain_key;
};
MLX5_CAP_OFF_CMDIF_CSUM = 46,
};
+enum {
+ /*
+ * Max wqe size for rdma read is 512 bytes, so this
+ * limits our max_sge_rd as the wqe needs to fit:
+ * - ctrl segment (16 bytes)
+ * - rdma segment (16 bytes)
+ * - scatter elements (16 bytes each)
+ */
+ MLX5_MAX_SGE_RD = (512 - 16 - 16) / 16
+};
+
struct mlx5_inbox_hdr {
__be16 opcode;
u8 rsvd[4];
};
enum mlx5_interface_state {
- MLX5_INTERFACE_STATE_DOWN,
- MLX5_INTERFACE_STATE_UP,
+ MLX5_INTERFACE_STATE_DOWN = BIT(0),
+ MLX5_INTERFACE_STATE_UP = BIT(1),
+ MLX5_INTERFACE_STATE_SHUTDOWN = BIT(2),
};
enum mlx5_pci_status {
enum mlx5_device_state state;
/* sync interface state */
struct mutex intf_state_mutex;
- enum mlx5_interface_state interface_state;
+ unsigned long intf_state;
void (*event) (struct mlx5_core_dev *dev,
enum mlx5_dev_event event,
unsigned long param);
int mlx5_query_port_admin_status(struct mlx5_core_dev *dev,
enum mlx5_port_status *status);
-int mlx5_set_port_mtu(struct mlx5_core_dev *dev, int mtu, u8 port);
-void mlx5_query_port_max_mtu(struct mlx5_core_dev *dev, int *max_mtu, u8 port);
-void mlx5_query_port_oper_mtu(struct mlx5_core_dev *dev, int *oper_mtu,
+int mlx5_set_port_mtu(struct mlx5_core_dev *dev, u16 mtu, u8 port);
+void mlx5_query_port_max_mtu(struct mlx5_core_dev *dev, u16 *max_mtu, u8 port);
+void mlx5_query_port_oper_mtu(struct mlx5_core_dev *dev, u16 *oper_mtu,
u8 port);
int mlx5_query_port_vl_hw_cap(struct mlx5_core_dev *dev,
u16 vport, u8 *addr);
int mlx5_modify_nic_vport_mac_address(struct mlx5_core_dev *dev,
u16 vport, u8 *addr);
+int mlx5_query_nic_vport_mtu(struct mlx5_core_dev *mdev, u16 *mtu);
+int mlx5_modify_nic_vport_mtu(struct mlx5_core_dev *mdev, u16 mtu);
int mlx5_query_nic_vport_system_image_guid(struct mlx5_core_dev *mdev,
u64 *system_image_guid);
int mlx5_query_nic_vport_node_guid(struct mlx5_core_dev *mdev, u64 *node_guid);
page = compound_head(page);
if (atomic_read(compound_mapcount_ptr(page)) >= 0)
return true;
+ if (PageHuge(page))
+ return false;
for (i = 0; i < hpage_nr_pages(page); i++) {
if (atomic_read(&page[i]._mapcount) >= 0)
return true;
struct page *vm_normal_page(struct vm_area_struct *vma, unsigned long addr,
pte_t pte);
+struct page *vm_normal_page_pmd(struct vm_area_struct *vma, unsigned long addr,
+ pmd_t pmd);
int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address,
unsigned long size);
net_ratelimited_function(pr_warn, fmt, ##__VA_ARGS__)
#define net_info_ratelimited(fmt, ...) \
net_ratelimited_function(pr_info, fmt, ##__VA_ARGS__)
-#if defined(DEBUG)
+#if defined(CONFIG_DYNAMIC_DEBUG)
+#define net_dbg_ratelimited(fmt, ...) \
+do { \
+ DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \
+ if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT) && \
+ net_ratelimit()) \
+ __dynamic_pr_debug(&descriptor, fmt, ##__VA_ARGS__); \
+} while (0)
+#elif defined(DEBUG)
#define net_dbg_ratelimited(fmt, ...) \
net_ratelimited_function(pr_debug, fmt, ##__VA_ARGS__)
#else
static inline bool net_gso_ok(netdev_features_t features, int gso_type)
{
- netdev_features_t feature = gso_type << NETIF_F_GSO_SHIFT;
+ netdev_features_t feature = (netdev_features_t)gso_type << NETIF_F_GSO_SHIFT;
/* check flags correspondence */
BUILD_BUG_ON(SKB_GSO_TCPV4 != (NETIF_F_TSO >> NETIF_F_GSO_SHIFT));
static inline bool is_of_node(struct fwnode_handle *fwnode)
{
- return fwnode && fwnode->type == FWNODE_OF;
+ return !IS_ERR_OR_NULL(fwnode) && fwnode->type == FWNODE_OF;
}
static inline struct device_node *to_of_node(struct fwnode_handle *fwnode)
return PageCompound(page);
}
+/*
+ * PageTransCompoundMap is the same as PageTransCompound, but it also
+ * guarantees the primary MMU has the entire compound page mapped
+ * through pmd_trans_huge, which in turn guarantees the secondary MMUs
+ * can also map the entire compound page. This allows the secondary
+ * MMUs to call get_user_pages() only once for each compound page and
+ * to immediately map the entire compound page with a single secondary
+ * MMU fault. If there will be a pmd split later, the secondary MMUs
+ * will get an update through the MMU notifier invalidation through
+ * split_huge_pmd().
+ *
+ * Unlike PageTransCompound, this is safe to be called only while
+ * split_huge_pmd() cannot run from under us, like if protected by the
+ * MMU notifier, otherwise it may result in page->_mapcount < 0 false
+ * positives.
+ */
+static inline int PageTransCompoundMap(struct page *page)
+{
+ return PageTransCompound(page) && atomic_read(&page->_mapcount) < 0;
+}
+
/*
* PageTransTail returns true for both transparent huge pages
* and hugetlbfs pages, so it should only be called when it's known
#else
TESTPAGEFLAG_FALSE(TransHuge)
TESTPAGEFLAG_FALSE(TransCompound)
+TESTPAGEFLAG_FALSE(TransCompoundMap)
TESTPAGEFLAG_FALSE(TransTail)
TESTPAGEFLAG_FALSE(DoubleMap)
TESTSETFLAG_FALSE(DoubleMap)
bool is_suspended:1; /* Ditto */
bool is_noirq_suspended:1;
bool is_late_suspended:1;
- bool ignore_children:1;
bool early_init:1; /* Owned by the PM core */
bool direct_complete:1; /* Owned by the PM core */
spinlock_t lock;
unsigned int deferred_resume:1;
unsigned int run_wake:1;
unsigned int runtime_auto:1;
+ bool ignore_children:1;
unsigned int no_callbacks:1;
unsigned int irq_safe:1;
unsigned int use_autosuspend:1;
struct dev_power_governor {
bool (*power_down_ok)(struct dev_pm_domain *domain);
- bool (*stop_ok)(struct device *dev);
+ bool (*suspend_ok)(struct device *dev);
};
struct gpd_dev_ops {
int (*start)(struct device *dev);
int (*stop)(struct device *dev);
- int (*save_state)(struct device *dev);
- int (*restore_state)(struct device *dev);
bool (*active_wakeup)(struct device *dev);
};
s64 resume_latency_ns;
s64 effective_constraint_ns;
bool constraint_changed;
- bool cached_stop_ok;
+ bool cached_suspend_ok;
};
struct pm_domain_data {
int dev_pm_opp_set_regulator(struct device *dev, const char *name);
void dev_pm_opp_put_regulator(struct device *dev);
int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq);
+int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, const struct cpumask *cpumask);
+int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask);
+void dev_pm_opp_remove_table(struct device *dev);
+void dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask);
#else
static inline unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp)
{
static inline struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev,
unsigned long freq, bool available)
{
- return ERR_PTR(-EINVAL);
+ return ERR_PTR(-ENOTSUPP);
}
static inline struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev,
unsigned long *freq)
{
- return ERR_PTR(-EINVAL);
+ return ERR_PTR(-ENOTSUPP);
}
static inline struct dev_pm_opp *dev_pm_opp_find_freq_ceil(struct device *dev,
unsigned long *freq)
{
- return ERR_PTR(-EINVAL);
+ return ERR_PTR(-ENOTSUPP);
}
static inline int dev_pm_opp_add(struct device *dev, unsigned long freq,
unsigned long u_volt)
{
- return -EINVAL;
+ return -ENOTSUPP;
}
static inline void dev_pm_opp_remove(struct device *dev, unsigned long freq)
static inline struct srcu_notifier_head *dev_pm_opp_get_notifier(
struct device *dev)
{
- return ERR_PTR(-EINVAL);
+ return ERR_PTR(-ENOTSUPP);
}
static inline int dev_pm_opp_set_supported_hw(struct device *dev,
const u32 *versions,
unsigned int count)
{
- return -EINVAL;
+ return -ENOTSUPP;
}
static inline void dev_pm_opp_put_supported_hw(struct device *dev) {}
static inline int dev_pm_opp_set_prop_name(struct device *dev, const char *name)
{
- return -EINVAL;
+ return -ENOTSUPP;
}
static inline void dev_pm_opp_put_prop_name(struct device *dev) {}
static inline int dev_pm_opp_set_regulator(struct device *dev, const char *name)
{
- return -EINVAL;
+ return -ENOTSUPP;
}
static inline void dev_pm_opp_put_regulator(struct device *dev) {}
static inline int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
+{
+ return -ENOTSUPP;
+}
+
+static inline int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, const struct cpumask *cpumask)
+{
+ return -ENOTSUPP;
+}
+
+static inline int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask)
{
return -EINVAL;
}
+static inline void dev_pm_opp_remove_table(struct device *dev)
+{
+}
+
+static inline void dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask)
+{
+}
+
#endif /* CONFIG_PM_OPP */
#if defined(CONFIG_PM_OPP) && defined(CONFIG_OF)
int dev_pm_opp_of_add_table(struct device *dev);
void dev_pm_opp_of_remove_table(struct device *dev);
-int dev_pm_opp_of_cpumask_add_table(cpumask_var_t cpumask);
-void dev_pm_opp_of_cpumask_remove_table(cpumask_var_t cpumask);
-int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask);
-int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask);
+int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask);
+void dev_pm_opp_of_cpumask_remove_table(const struct cpumask *cpumask);
+int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask);
#else
static inline int dev_pm_opp_of_add_table(struct device *dev)
{
- return -EINVAL;
+ return -ENOTSUPP;
}
static inline void dev_pm_opp_of_remove_table(struct device *dev)
{
}
-static inline int dev_pm_opp_of_cpumask_add_table(cpumask_var_t cpumask)
-{
- return -ENOSYS;
-}
-
-static inline void dev_pm_opp_of_cpumask_remove_table(cpumask_var_t cpumask)
+static inline int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask)
{
+ return -ENOTSUPP;
}
-static inline int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
+static inline void dev_pm_opp_of_cpumask_remove_table(const struct cpumask *cpumask)
{
- return -ENOSYS;
}
-static inline int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
+static inline int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask)
{
- return -ENOSYS;
+ return -ENOTSUPP;
}
#endif
s64 delta_ns);
extern void pm_runtime_set_memalloc_noio(struct device *dev, bool enable);
+static inline void pm_suspend_ignore_children(struct device *dev, bool enable)
+{
+ dev->power.ignore_children = enable;
+}
+
static inline bool pm_children_suspended(struct device *dev)
{
return dev->power.ignore_children
static inline void pm_runtime_allow(struct device *dev) {}
static inline void pm_runtime_forbid(struct device *dev) {}
+static inline void pm_suspend_ignore_children(struct device *dev, bool enable) {}
static inline bool pm_children_suspended(struct device *dev) { return false; }
static inline void pm_runtime_get_noresume(struct device *dev) {}
static inline void pm_runtime_put_noidle(struct device *dev) {}
+++ /dev/null
-/*
- * Copyright (c) 2015-2016, Integrated Device Technology Inc.
- * Copyright (c) 2015, Prodrive Technologies
- * Copyright (c) 2015, Texas Instruments Incorporated
- * Copyright (c) 2015, RapidIO Trade Association
- * All rights reserved.
- *
- * This software is available to you under a choice of one of two licenses.
- * You may choose to be licensed under the terms of the GNU General Public
- * License(GPL) Version 2, or the BSD-3 Clause license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- *
- * 3. Neither the name of the copyright holder nor the names of its contributors
- * may be used to endorse or promote products derived from this software without
- * specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
- * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
- * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
- * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _RIO_MPORT_CDEV_H_
-#define _RIO_MPORT_CDEV_H_
-
-#ifndef __user
-#define __user
-#endif
-
-struct rio_mport_maint_io {
- uint32_t rioid; /* destID of remote device */
- uint32_t hopcount; /* hopcount to remote device */
- uint32_t offset; /* offset in register space */
- size_t length; /* length in bytes */
- void __user *buffer; /* data buffer */
-};
-
-/*
- * Definitions for RapidIO data transfers:
- * - memory mapped (MAPPED)
- * - packet generation from memory (TRANSFER)
- */
-#define RIO_TRANSFER_MODE_MAPPED (1 << 0)
-#define RIO_TRANSFER_MODE_TRANSFER (1 << 1)
-#define RIO_CAP_DBL_SEND (1 << 2)
-#define RIO_CAP_DBL_RECV (1 << 3)
-#define RIO_CAP_PW_SEND (1 << 4)
-#define RIO_CAP_PW_RECV (1 << 5)
-#define RIO_CAP_MAP_OUTB (1 << 6)
-#define RIO_CAP_MAP_INB (1 << 7)
-
-struct rio_mport_properties {
- uint16_t hdid;
- uint8_t id; /* Physical port ID */
- uint8_t index;
- uint32_t flags;
- uint32_t sys_size; /* Default addressing size */
- uint8_t port_ok;
- uint8_t link_speed;
- uint8_t link_width;
- uint32_t dma_max_sge;
- uint32_t dma_max_size;
- uint32_t dma_align;
- uint32_t transfer_mode; /* Default transfer mode */
- uint32_t cap_sys_size; /* Capable system sizes */
- uint32_t cap_addr_size; /* Capable addressing sizes */
- uint32_t cap_transfer_mode; /* Capable transfer modes */
- uint32_t cap_mport; /* Mport capabilities */
-};
-
-/*
- * Definitions for RapidIO events;
- * - incoming port-writes
- * - incoming doorbells
- */
-#define RIO_DOORBELL (1 << 0)
-#define RIO_PORTWRITE (1 << 1)
-
-struct rio_doorbell {
- uint32_t rioid;
- uint16_t payload;
-};
-
-struct rio_doorbell_filter {
- uint32_t rioid; /* 0xffffffff to match all ids */
- uint16_t low;
- uint16_t high;
-};
-
-
-struct rio_portwrite {
- uint32_t payload[16];
-};
-
-struct rio_pw_filter {
- uint32_t mask;
- uint32_t low;
- uint32_t high;
-};
-
-/* RapidIO base address for inbound requests set to value defined below
- * indicates that no specific RIO-to-local address translation is requested
- * and driver should use direct (one-to-one) address mapping.
-*/
-#define RIO_MAP_ANY_ADDR (uint64_t)(~((uint64_t) 0))
-
-struct rio_mmap {
- uint32_t rioid;
- uint64_t rio_addr;
- uint64_t length;
- uint64_t handle;
- void *address;
-};
-
-struct rio_dma_mem {
- uint64_t length; /* length of DMA memory */
- uint64_t dma_handle; /* handle associated with this memory */
- void *buffer; /* pointer to this memory */
-};
-
-
-struct rio_event {
- unsigned int header; /* event type RIO_DOORBELL or RIO_PORTWRITE */
- union {
- struct rio_doorbell doorbell; /* header for RIO_DOORBELL */
- struct rio_portwrite portwrite; /* header for RIO_PORTWRITE */
- } u;
-};
-
-enum rio_transfer_sync {
- RIO_TRANSFER_SYNC, /* synchronous transfer */
- RIO_TRANSFER_ASYNC, /* asynchronous transfer */
- RIO_TRANSFER_FAF, /* fire-and-forget transfer */
-};
-
-enum rio_transfer_dir {
- RIO_TRANSFER_DIR_READ, /* Read operation */
- RIO_TRANSFER_DIR_WRITE, /* Write operation */
-};
-
-/*
- * RapidIO data exchange transactions are lists of individual transfers. Each
- * transfer exchanges data between two RapidIO devices by remote direct memory
- * access and has its own completion code.
- *
- * The RapidIO specification defines four types of data exchange requests:
- * NREAD, NWRITE, SWRITE and NWRITE_R. The RapidIO DMA channel interface allows
- * to specify the required type of write operation or combination of them when
- * only the last data packet requires response.
- *
- * NREAD: read up to 256 bytes from remote device memory into local memory
- * NWRITE: write up to 256 bytes from local memory to remote device memory
- * without confirmation
- * SWRITE: as NWRITE, but all addresses and payloads must be 64-bit aligned
- * NWRITE_R: as NWRITE, but expect acknowledgment from remote device.
- *
- * The default exchange is chosen from NREAD and any of the WRITE modes as the
- * driver sees fit. For write requests the user can explicitly choose between
- * any of the write modes for each transaction.
- */
-enum rio_exchange {
- RIO_EXCHANGE_DEFAULT, /* Default method */
- RIO_EXCHANGE_NWRITE, /* All packets using NWRITE */
- RIO_EXCHANGE_SWRITE, /* All packets using SWRITE */
- RIO_EXCHANGE_NWRITE_R, /* Last packet NWRITE_R, others NWRITE */
- RIO_EXCHANGE_SWRITE_R, /* Last packet NWRITE_R, others SWRITE */
- RIO_EXCHANGE_NWRITE_R_ALL, /* All packets using NWRITE_R */
-};
-
-struct rio_transfer_io {
- uint32_t rioid; /* Target destID */
- uint64_t rio_addr; /* Address in target's RIO mem space */
- enum rio_exchange method; /* Data exchange method */
- void __user *loc_addr;
- uint64_t handle;
- uint64_t offset; /* Offset in buffer */
- uint64_t length; /* Length in bytes */
- uint32_t completion_code; /* Completion code for this transfer */
-};
-
-struct rio_transaction {
- uint32_t transfer_mode; /* Data transfer mode */
- enum rio_transfer_sync sync; /* Synchronization method */
- enum rio_transfer_dir dir; /* Transfer direction */
- size_t count; /* Number of transfers */
- struct rio_transfer_io __user *block; /* Array of <count> transfers */
-};
-
-struct rio_async_tx_wait {
- uint32_t token; /* DMA transaction ID token */
- uint32_t timeout; /* Wait timeout in msec, if 0 use default TO */
-};
-
-#define RIO_MAX_DEVNAME_SZ 20
-
-struct rio_rdev_info {
- uint32_t destid;
- uint8_t hopcount;
- uint32_t comptag;
- char name[RIO_MAX_DEVNAME_SZ + 1];
-};
-
-/* Driver IOCTL codes */
-#define RIO_MPORT_DRV_MAGIC 'm'
-
-#define RIO_MPORT_MAINT_HDID_SET \
- _IOW(RIO_MPORT_DRV_MAGIC, 1, uint16_t)
-#define RIO_MPORT_MAINT_COMPTAG_SET \
- _IOW(RIO_MPORT_DRV_MAGIC, 2, uint32_t)
-#define RIO_MPORT_MAINT_PORT_IDX_GET \
- _IOR(RIO_MPORT_DRV_MAGIC, 3, uint32_t)
-#define RIO_MPORT_GET_PROPERTIES \
- _IOR(RIO_MPORT_DRV_MAGIC, 4, struct rio_mport_properties)
-#define RIO_MPORT_MAINT_READ_LOCAL \
- _IOR(RIO_MPORT_DRV_MAGIC, 5, struct rio_mport_maint_io)
-#define RIO_MPORT_MAINT_WRITE_LOCAL \
- _IOW(RIO_MPORT_DRV_MAGIC, 6, struct rio_mport_maint_io)
-#define RIO_MPORT_MAINT_READ_REMOTE \
- _IOR(RIO_MPORT_DRV_MAGIC, 7, struct rio_mport_maint_io)
-#define RIO_MPORT_MAINT_WRITE_REMOTE \
- _IOW(RIO_MPORT_DRV_MAGIC, 8, struct rio_mport_maint_io)
-#define RIO_ENABLE_DOORBELL_RANGE \
- _IOW(RIO_MPORT_DRV_MAGIC, 9, struct rio_doorbell_filter)
-#define RIO_DISABLE_DOORBELL_RANGE \
- _IOW(RIO_MPORT_DRV_MAGIC, 10, struct rio_doorbell_filter)
-#define RIO_ENABLE_PORTWRITE_RANGE \
- _IOW(RIO_MPORT_DRV_MAGIC, 11, struct rio_pw_filter)
-#define RIO_DISABLE_PORTWRITE_RANGE \
- _IOW(RIO_MPORT_DRV_MAGIC, 12, struct rio_pw_filter)
-#define RIO_SET_EVENT_MASK \
- _IOW(RIO_MPORT_DRV_MAGIC, 13, unsigned int)
-#define RIO_GET_EVENT_MASK \
- _IOR(RIO_MPORT_DRV_MAGIC, 14, unsigned int)
-#define RIO_MAP_OUTBOUND \
- _IOWR(RIO_MPORT_DRV_MAGIC, 15, struct rio_mmap)
-#define RIO_UNMAP_OUTBOUND \
- _IOW(RIO_MPORT_DRV_MAGIC, 16, struct rio_mmap)
-#define RIO_MAP_INBOUND \
- _IOWR(RIO_MPORT_DRV_MAGIC, 17, struct rio_mmap)
-#define RIO_UNMAP_INBOUND \
- _IOW(RIO_MPORT_DRV_MAGIC, 18, uint64_t)
-#define RIO_ALLOC_DMA \
- _IOWR(RIO_MPORT_DRV_MAGIC, 19, struct rio_dma_mem)
-#define RIO_FREE_DMA \
- _IOW(RIO_MPORT_DRV_MAGIC, 20, uint64_t)
-#define RIO_TRANSFER \
- _IOWR(RIO_MPORT_DRV_MAGIC, 21, struct rio_transaction)
-#define RIO_WAIT_FOR_ASYNC \
- _IOW(RIO_MPORT_DRV_MAGIC, 22, struct rio_async_tx_wait)
-#define RIO_DEV_ADD \
- _IOW(RIO_MPORT_DRV_MAGIC, 23, struct rio_rdev_info)
-#define RIO_DEV_DEL \
- _IOW(RIO_MPORT_DRV_MAGIC, 24, struct rio_rdev_info)
-
-#endif /* _RIO_MPORT_CDEV_H_ */
u64 time, unsigned long util, unsigned long max);
};
-void cpufreq_set_update_util_data(int cpu, struct update_util_data *data);
+void cpufreq_add_update_util_hook(int cpu, struct update_util_data *data,
+ void (*func)(struct update_util_data *data, u64 time,
+ unsigned long util, unsigned long max));
+void cpufreq_remove_update_util_hook(int cpu);
#endif /* CONFIG_CPU_FREQ */
#endif
#ifdef CONFIG_MEMCG
static inline int mem_cgroup_swappiness(struct mem_cgroup *memcg)
{
+ /* Cgroup2 doesn't have per-cgroup swappiness */
+ if (cgroup_subsys_on_dfl(memory_cgrp_subsys))
+ return vm_swappiness;
+
/* root ? */
if (mem_cgroup_disabled() || !memcg->css.parent)
return vm_swappiness;
* defined; unless noted otherwise, they are optional, and can be
* filled in with a null pointer.
*
- * struct tty_struct * (*lookup)(struct tty_driver *self, int idx)
+ * struct tty_struct * (*lookup)(struct tty_driver *self, struct file *, int idx)
*
* Return the tty device corresponding to idx, NULL if there is not
* one currently in use and an ERR_PTR value on error. Called under
struct tty_operations {
struct tty_struct * (*lookup)(struct tty_driver *driver,
- struct inode *inode, int idx);
+ struct file *filp, int idx);
int (*install)(struct tty_driver *driver, struct tty_struct *tty);
void (*remove)(struct tty_driver *driver, struct tty_struct *tty);
int (*open)(struct tty_struct * tty, struct file * filp);
/**
* struct vb2_ops - driver-specific callbacks
*
+ * @verify_planes_array: Verify that a given user space structure contains
+ * enough planes for the buffer. This is called
+ * for each dequeued buffer.
* @fill_user_buffer: given a vb2_buffer fill in the userspace structure.
* For V4L2 this is a struct v4l2_buffer.
* @fill_vb2_buffer: given a userspace structure, fill in the vb2_buffer.
* the vb2_buffer struct.
*/
struct vb2_buf_ops {
+ int (*verify_planes_array)(struct vb2_buffer *vb, const void *pb);
void (*fill_user_buffer)(struct vb2_buffer *vb, void *pb);
int (*fill_vb2_buffer)(struct vb2_buffer *vb, const void *pb,
struct vb2_plane *planes);
* @fileio_read_once: report EOF after reading the first buffer
* @fileio_write_immediately: queue buffer after each write() call
* @allow_zero_bytesused: allow bytesused == 0 to be passed to the driver
+ * @quirk_poll_must_check_waiting_for_buffers: Return POLLERR at poll when QBUF
+ * has not been called. This is a vb1 idiom that has been adopted
+ * also by vb2.
* @lock: pointer to a mutex that protects the vb2_queue struct. The
* driver can set this to a mutex to let the v4l2 core serialize
* the queuing ioctls. If the driver wants to handle locking
unsigned fileio_read_once:1;
unsigned fileio_write_immediately:1;
unsigned allow_zero_bytesused:1;
+ unsigned quirk_poll_must_check_waiting_for_buffers:1;
struct mutex *lock;
void *owner;
struct net_device *orig_dev;
enum switchdev_attr_id id;
u32 flags;
+ void *complete_priv;
+ void (*complete)(struct net_device *dev, int err, void *priv);
union {
struct netdev_phys_item_id ppid; /* PORT_PARENT_ID */
u8 stp_state; /* PORT_STP_STATE */
struct net_device *orig_dev;
enum switchdev_obj_id id;
u32 flags;
+ void *complete_priv;
+ void (*complete)(struct net_device *dev, int err, void *priv);
};
/* SWITCHDEV_OBJ_ID_PORT_VLAN */
(skb->inner_protocol_type != ENCAP_TYPE_ETHER ||
skb->inner_protocol != htons(ETH_P_TEB) ||
(skb_inner_mac_header(skb) - skb_transport_header(skb) !=
- sizeof(struct udphdr) + sizeof(struct vxlanhdr))))
+ sizeof(struct udphdr) + sizeof(struct vxlanhdr)) ||
+ (skb->ip_summed != CHECKSUM_NONE &&
+ !can_checksum_protocol(features, inner_eth_hdr(skb)->h_proto))))
return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK);
return features;
#define _RDMA_IB_H
#include <linux/types.h>
+#include <linux/sched.h>
struct ib_addr {
union {
__u64 sib_scope_id;
};
+/*
+ * The IB interfaces that use write() as bi-directional ioctl() are
+ * fundamentally unsafe, since there are lots of ways to trigger "write()"
+ * calls from various contexts with elevated privileges. That includes the
+ * traditional suid executable error message writes, but also various kernel
+ * interfaces that can write to file descriptors.
+ *
+ * This function provides protection for the legacy API by restricting the
+ * calling context.
+ */
+static inline bool ib_safe_file_access(struct file *filp)
+{
+ return filp->f_cred == current_cred() && segment_eq(get_fs(), USER_DS);
+}
+
#endif /* _RDMA_IB_H */
#ifdef CONFIG_SND_HDA_I915
int snd_hdac_set_codec_wakeup(struct hdac_bus *bus, bool enable);
int snd_hdac_display_power(struct hdac_bus *bus, bool enable);
-int snd_hdac_get_display_clk(struct hdac_bus *bus);
+void snd_hdac_i915_set_bclk(struct hdac_bus *bus);
int snd_hdac_sync_audio_rate(struct hdac_bus *bus, hda_nid_t nid, int rate);
int snd_hdac_acomp_get_eld(struct hdac_bus *bus, hda_nid_t nid,
bool *audio_enabled, char *buffer, int max_bytes);
{
return 0;
}
-static inline int snd_hdac_get_display_clk(struct hdac_bus *bus)
+static inline void snd_hdac_i915_set_bclk(struct hdac_bus *bus)
{
- return 0;
}
static inline int snd_hdac_sync_audio_rate(struct hdac_bus *bus, hda_nid_t nid,
int rate)
#define __NR_copy_file_range 285
__SYSCALL(__NR_copy_file_range, sys_copy_file_range)
#define __NR_preadv2 286
-__SYSCALL(__NR_preadv2, sys_preadv2)
+__SC_COMP(__NR_preadv2, sys_preadv2, compat_sys_preadv2)
#define __NR_pwritev2 287
-__SYSCALL(__NR_pwritev2, sys_pwritev2)
+__SC_COMP(__NR_pwritev2, sys_pwritev2, compat_sys_pwritev2)
#undef __NR_syscalls
#define __NR_syscalls 288
#define MACSEC_MAX_KEY_LEN 128
-#define DEFAULT_CIPHER_ID 0x0080020001000001ULL
-#define DEFAULT_CIPHER_ALT 0x0080C20001000001ULL
+#define MACSEC_DEFAULT_CIPHER_ID 0x0080020001000001ULL
+#define MACSEC_DEFAULT_CIPHER_ALT 0x0080C20001000001ULL
#define MACSEC_MIN_ICV_LEN 8
#define MACSEC_MAX_ICV_LEN 32
--- /dev/null
+/*
+ * Copyright (c) 2015-2016, Integrated Device Technology Inc.
+ * Copyright (c) 2015, Prodrive Technologies
+ * Copyright (c) 2015, Texas Instruments Incorporated
+ * Copyright (c) 2015, RapidIO Trade Association
+ * All rights reserved.
+ *
+ * This software is available to you under a choice of one of two licenses.
+ * You may choose to be licensed under the terms of the GNU General Public
+ * License(GPL) Version 2, or the BSD-3 Clause license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. Neither the name of the copyright holder nor the names of its contributors
+ * may be used to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RIO_MPORT_CDEV_H_
+#define _RIO_MPORT_CDEV_H_
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+struct rio_mport_maint_io {
+ __u16 rioid; /* destID of remote device */
+ __u8 hopcount; /* hopcount to remote device */
+ __u8 pad0[5];
+ __u32 offset; /* offset in register space */
+ __u32 length; /* length in bytes */
+ __u64 buffer; /* pointer to data buffer */
+};
+
+/*
+ * Definitions for RapidIO data transfers:
+ * - memory mapped (MAPPED)
+ * - packet generation from memory (TRANSFER)
+ */
+#define RIO_TRANSFER_MODE_MAPPED (1 << 0)
+#define RIO_TRANSFER_MODE_TRANSFER (1 << 1)
+#define RIO_CAP_DBL_SEND (1 << 2)
+#define RIO_CAP_DBL_RECV (1 << 3)
+#define RIO_CAP_PW_SEND (1 << 4)
+#define RIO_CAP_PW_RECV (1 << 5)
+#define RIO_CAP_MAP_OUTB (1 << 6)
+#define RIO_CAP_MAP_INB (1 << 7)
+
+struct rio_mport_properties {
+ __u16 hdid;
+ __u8 id; /* Physical port ID */
+ __u8 index;
+ __u32 flags;
+ __u32 sys_size; /* Default addressing size */
+ __u8 port_ok;
+ __u8 link_speed;
+ __u8 link_width;
+ __u8 pad0;
+ __u32 dma_max_sge;
+ __u32 dma_max_size;
+ __u32 dma_align;
+ __u32 transfer_mode; /* Default transfer mode */
+ __u32 cap_sys_size; /* Capable system sizes */
+ __u32 cap_addr_size; /* Capable addressing sizes */
+ __u32 cap_transfer_mode; /* Capable transfer modes */
+ __u32 cap_mport; /* Mport capabilities */
+};
+
+/*
+ * Definitions for RapidIO events;
+ * - incoming port-writes
+ * - incoming doorbells
+ */
+#define RIO_DOORBELL (1 << 0)
+#define RIO_PORTWRITE (1 << 1)
+
+struct rio_doorbell {
+ __u16 rioid;
+ __u16 payload;
+};
+
+struct rio_doorbell_filter {
+ __u16 rioid; /* Use RIO_INVALID_DESTID to match all ids */
+ __u16 low;
+ __u16 high;
+ __u16 pad0;
+};
+
+
+struct rio_portwrite {
+ __u32 payload[16];
+};
+
+struct rio_pw_filter {
+ __u32 mask;
+ __u32 low;
+ __u32 high;
+ __u32 pad0;
+};
+
+/* RapidIO base address for inbound requests set to value defined below
+ * indicates that no specific RIO-to-local address translation is requested
+ * and driver should use direct (one-to-one) address mapping.
+*/
+#define RIO_MAP_ANY_ADDR (__u64)(~((__u64) 0))
+
+struct rio_mmap {
+ __u16 rioid;
+ __u16 pad0[3];
+ __u64 rio_addr;
+ __u64 length;
+ __u64 handle;
+ __u64 address;
+};
+
+struct rio_dma_mem {
+ __u64 length; /* length of DMA memory */
+ __u64 dma_handle; /* handle associated with this memory */
+ __u64 address;
+};
+
+struct rio_event {
+ __u32 header; /* event type RIO_DOORBELL or RIO_PORTWRITE */
+ union {
+ struct rio_doorbell doorbell; /* header for RIO_DOORBELL */
+ struct rio_portwrite portwrite; /* header for RIO_PORTWRITE */
+ } u;
+ __u32 pad0;
+};
+
+enum rio_transfer_sync {
+ RIO_TRANSFER_SYNC, /* synchronous transfer */
+ RIO_TRANSFER_ASYNC, /* asynchronous transfer */
+ RIO_TRANSFER_FAF, /* fire-and-forget transfer */
+};
+
+enum rio_transfer_dir {
+ RIO_TRANSFER_DIR_READ, /* Read operation */
+ RIO_TRANSFER_DIR_WRITE, /* Write operation */
+};
+
+/*
+ * RapidIO data exchange transactions are lists of individual transfers. Each
+ * transfer exchanges data between two RapidIO devices by remote direct memory
+ * access and has its own completion code.
+ *
+ * The RapidIO specification defines four types of data exchange requests:
+ * NREAD, NWRITE, SWRITE and NWRITE_R. The RapidIO DMA channel interface allows
+ * to specify the required type of write operation or combination of them when
+ * only the last data packet requires response.
+ *
+ * NREAD: read up to 256 bytes from remote device memory into local memory
+ * NWRITE: write up to 256 bytes from local memory to remote device memory
+ * without confirmation
+ * SWRITE: as NWRITE, but all addresses and payloads must be 64-bit aligned
+ * NWRITE_R: as NWRITE, but expect acknowledgment from remote device.
+ *
+ * The default exchange is chosen from NREAD and any of the WRITE modes as the
+ * driver sees fit. For write requests the user can explicitly choose between
+ * any of the write modes for each transaction.
+ */
+enum rio_exchange {
+ RIO_EXCHANGE_DEFAULT, /* Default method */
+ RIO_EXCHANGE_NWRITE, /* All packets using NWRITE */
+ RIO_EXCHANGE_SWRITE, /* All packets using SWRITE */
+ RIO_EXCHANGE_NWRITE_R, /* Last packet NWRITE_R, others NWRITE */
+ RIO_EXCHANGE_SWRITE_R, /* Last packet NWRITE_R, others SWRITE */
+ RIO_EXCHANGE_NWRITE_R_ALL, /* All packets using NWRITE_R */
+};
+
+struct rio_transfer_io {
+ __u64 rio_addr; /* Address in target's RIO mem space */
+ __u64 loc_addr;
+ __u64 handle;
+ __u64 offset; /* Offset in buffer */
+ __u64 length; /* Length in bytes */
+ __u16 rioid; /* Target destID */
+ __u16 method; /* Data exchange method, one of rio_exchange enum */
+ __u32 completion_code; /* Completion code for this transfer */
+};
+
+struct rio_transaction {
+ __u64 block; /* Pointer to array of <count> transfers */
+ __u32 count; /* Number of transfers */
+ __u32 transfer_mode; /* Data transfer mode */
+ __u16 sync; /* Synch method, one of rio_transfer_sync enum */
+ __u16 dir; /* Transfer direction, one of rio_transfer_dir enum */
+ __u32 pad0;
+};
+
+struct rio_async_tx_wait {
+ __u32 token; /* DMA transaction ID token */
+ __u32 timeout; /* Wait timeout in msec, if 0 use default TO */
+};
+
+#define RIO_MAX_DEVNAME_SZ 20
+
+struct rio_rdev_info {
+ __u16 destid;
+ __u8 hopcount;
+ __u8 pad0;
+ __u32 comptag;
+ char name[RIO_MAX_DEVNAME_SZ + 1];
+};
+
+/* Driver IOCTL codes */
+#define RIO_MPORT_DRV_MAGIC 'm'
+
+#define RIO_MPORT_MAINT_HDID_SET \
+ _IOW(RIO_MPORT_DRV_MAGIC, 1, __u16)
+#define RIO_MPORT_MAINT_COMPTAG_SET \
+ _IOW(RIO_MPORT_DRV_MAGIC, 2, __u32)
+#define RIO_MPORT_MAINT_PORT_IDX_GET \
+ _IOR(RIO_MPORT_DRV_MAGIC, 3, __u32)
+#define RIO_MPORT_GET_PROPERTIES \
+ _IOR(RIO_MPORT_DRV_MAGIC, 4, struct rio_mport_properties)
+#define RIO_MPORT_MAINT_READ_LOCAL \
+ _IOR(RIO_MPORT_DRV_MAGIC, 5, struct rio_mport_maint_io)
+#define RIO_MPORT_MAINT_WRITE_LOCAL \
+ _IOW(RIO_MPORT_DRV_MAGIC, 6, struct rio_mport_maint_io)
+#define RIO_MPORT_MAINT_READ_REMOTE \
+ _IOR(RIO_MPORT_DRV_MAGIC, 7, struct rio_mport_maint_io)
+#define RIO_MPORT_MAINT_WRITE_REMOTE \
+ _IOW(RIO_MPORT_DRV_MAGIC, 8, struct rio_mport_maint_io)
+#define RIO_ENABLE_DOORBELL_RANGE \
+ _IOW(RIO_MPORT_DRV_MAGIC, 9, struct rio_doorbell_filter)
+#define RIO_DISABLE_DOORBELL_RANGE \
+ _IOW(RIO_MPORT_DRV_MAGIC, 10, struct rio_doorbell_filter)
+#define RIO_ENABLE_PORTWRITE_RANGE \
+ _IOW(RIO_MPORT_DRV_MAGIC, 11, struct rio_pw_filter)
+#define RIO_DISABLE_PORTWRITE_RANGE \
+ _IOW(RIO_MPORT_DRV_MAGIC, 12, struct rio_pw_filter)
+#define RIO_SET_EVENT_MASK \
+ _IOW(RIO_MPORT_DRV_MAGIC, 13, __u32)
+#define RIO_GET_EVENT_MASK \
+ _IOR(RIO_MPORT_DRV_MAGIC, 14, __u32)
+#define RIO_MAP_OUTBOUND \
+ _IOWR(RIO_MPORT_DRV_MAGIC, 15, struct rio_mmap)
+#define RIO_UNMAP_OUTBOUND \
+ _IOW(RIO_MPORT_DRV_MAGIC, 16, struct rio_mmap)
+#define RIO_MAP_INBOUND \
+ _IOWR(RIO_MPORT_DRV_MAGIC, 17, struct rio_mmap)
+#define RIO_UNMAP_INBOUND \
+ _IOW(RIO_MPORT_DRV_MAGIC, 18, __u64)
+#define RIO_ALLOC_DMA \
+ _IOWR(RIO_MPORT_DRV_MAGIC, 19, struct rio_dma_mem)
+#define RIO_FREE_DMA \
+ _IOW(RIO_MPORT_DRV_MAGIC, 20, __u64)
+#define RIO_TRANSFER \
+ _IOWR(RIO_MPORT_DRV_MAGIC, 21, struct rio_transaction)
+#define RIO_WAIT_FOR_ASYNC \
+ _IOW(RIO_MPORT_DRV_MAGIC, 22, struct rio_async_tx_wait)
+#define RIO_DEV_ADD \
+ _IOW(RIO_MPORT_DRV_MAGIC, 23, struct rio_rdev_info)
+#define RIO_DEV_DEL \
+ _IOW(RIO_MPORT_DRV_MAGIC, 24, struct rio_rdev_info)
+
+#endif /* _RIO_MPORT_CDEV_H_ */
static inline __attribute_const__ __u16 __fswab16(__u16 val)
{
-#ifdef __HAVE_BUILTIN_BSWAP16__
- return __builtin_bswap16(val);
-#elif defined (__arch_swab16)
+#if defined (__arch_swab16)
return __arch_swab16(val);
#else
return ___constant_swab16(val);
static inline __attribute_const__ __u32 __fswab32(__u32 val)
{
-#ifdef __HAVE_BUILTIN_BSWAP32__
- return __builtin_bswap32(val);
-#elif defined(__arch_swab32)
+#if defined(__arch_swab32)
return __arch_swab32(val);
#else
return ___constant_swab32(val);
static inline __attribute_const__ __u64 __fswab64(__u64 val)
{
-#ifdef __HAVE_BUILTIN_BSWAP64__
- return __builtin_bswap64(val);
-#elif defined (__arch_swab64)
+#if defined (__arch_swab64)
return __arch_swab64(val);
#elif defined(__SWAB_64_THRU_32__)
__u32 h = val >> 32;
* __swab16 - return a byteswapped 16-bit value
* @x: value to byteswap
*/
+#ifdef __HAVE_BUILTIN_BSWAP16__
+#define __swab16(x) (__u16)__builtin_bswap16((__u16)(x))
+#else
#define __swab16(x) \
(__builtin_constant_p((__u16)(x)) ? \
___constant_swab16(x) : \
__fswab16(x))
+#endif
/**
* __swab32 - return a byteswapped 32-bit value
* @x: value to byteswap
*/
+#ifdef __HAVE_BUILTIN_BSWAP32__
+#define __swab32(x) (__u32)__builtin_bswap32((__u32)(x))
+#else
#define __swab32(x) \
(__builtin_constant_p((__u32)(x)) ? \
___constant_swab32(x) : \
__fswab32(x))
+#endif
/**
* __swab64 - return a byteswapped 64-bit value
* @x: value to byteswap
*/
+#ifdef __HAVE_BUILTIN_BSWAP64__
+#define __swab64(x) (__u64)__builtin_bswap64((__u64)(x))
+#else
#define __swab64(x) \
(__builtin_constant_p((__u64)(x)) ? \
___constant_swab64(x) : \
__fswab64(x))
+#endif
/**
* __swahw32 - return a word-swapped 32-bit value
#define V4L2_DV_BT_CEA_3840X2160P24 { \
.type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(3840, 2160, 0, V4L2_DV_HSYNC_POS_POL, \
+ V4L2_INIT_BT_TIMINGS(3840, 2160, 0, \
+ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
297000000, 1276, 88, 296, 8, 10, 72, 0, 0, 0, \
V4L2_DV_BT_STD_CEA861, \
V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \
#define V4L2_DV_BT_CEA_3840X2160P25 { \
.type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(3840, 2160, 0, V4L2_DV_HSYNC_POS_POL, \
+ V4L2_INIT_BT_TIMINGS(3840, 2160, 0, \
+ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
297000000, 1056, 88, 296, 8, 10, 72, 0, 0, 0, \
V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_IS_CE_VIDEO) \
}
#define V4L2_DV_BT_CEA_3840X2160P30 { \
.type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(3840, 2160, 0, V4L2_DV_HSYNC_POS_POL, \
+ V4L2_INIT_BT_TIMINGS(3840, 2160, 0, \
+ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
297000000, 176, 88, 296, 8, 10, 72, 0, 0, 0, \
V4L2_DV_BT_STD_CEA861, \
V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \
#define V4L2_DV_BT_CEA_3840X2160P50 { \
.type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(3840, 2160, 0, V4L2_DV_HSYNC_POS_POL, \
+ V4L2_INIT_BT_TIMINGS(3840, 2160, 0, \
+ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
594000000, 1056, 88, 296, 8, 10, 72, 0, 0, 0, \
V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_IS_CE_VIDEO) \
}
#define V4L2_DV_BT_CEA_3840X2160P60 { \
.type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(3840, 2160, 0, V4L2_DV_HSYNC_POS_POL, \
+ V4L2_INIT_BT_TIMINGS(3840, 2160, 0, \
+ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
594000000, 176, 88, 296, 8, 10, 72, 0, 0, 0, \
V4L2_DV_BT_STD_CEA861, \
V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \
#define V4L2_DV_BT_CEA_4096X2160P24 { \
.type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(4096, 2160, 0, V4L2_DV_HSYNC_POS_POL, \
+ V4L2_INIT_BT_TIMINGS(4096, 2160, 0, \
+ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
297000000, 1020, 88, 296, 8, 10, 72, 0, 0, 0, \
V4L2_DV_BT_STD_CEA861, \
V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \
#define V4L2_DV_BT_CEA_4096X2160P25 { \
.type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(4096, 2160, 0, V4L2_DV_HSYNC_POS_POL, \
+ V4L2_INIT_BT_TIMINGS(4096, 2160, 0, \
+ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
297000000, 968, 88, 128, 8, 10, 72, 0, 0, 0, \
V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_IS_CE_VIDEO) \
}
#define V4L2_DV_BT_CEA_4096X2160P30 { \
.type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(4096, 2160, 0, V4L2_DV_HSYNC_POS_POL, \
+ V4L2_INIT_BT_TIMINGS(4096, 2160, 0, \
+ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
297000000, 88, 88, 128, 8, 10, 72, 0, 0, 0, \
V4L2_DV_BT_STD_CEA861, \
V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \
#define V4L2_DV_BT_CEA_4096X2160P50 { \
.type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(4096, 2160, 0, V4L2_DV_HSYNC_POS_POL, \
+ V4L2_INIT_BT_TIMINGS(4096, 2160, 0, \
+ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
594000000, 968, 88, 128, 8, 10, 72, 0, 0, 0, \
V4L2_DV_BT_STD_CEA861, V4L2_DV_FL_IS_CE_VIDEO) \
}
#define V4L2_DV_BT_CEA_4096X2160P60 { \
.type = V4L2_DV_BT_656_1120, \
- V4L2_INIT_BT_TIMINGS(4096, 2160, 0, V4L2_DV_HSYNC_POS_POL, \
+ V4L2_INIT_BT_TIMINGS(4096, 2160, 0, \
+ V4L2_DV_HSYNC_POS_POL | V4L2_DV_VSYNC_POS_POL, \
594000000, 88, 88, 128, 8, 10, 72, 0, 0, 0, \
V4L2_DV_BT_STD_CEA861, \
V4L2_DV_FL_CAN_REDUCE_FPS | V4L2_DV_FL_IS_CE_VIDEO) \
*/
#define xen_pfn_to_page(xen_pfn) \
- ((pfn_to_page(((unsigned long)(xen_pfn) << XEN_PAGE_SHIFT) >> PAGE_SHIFT)))
+ (pfn_to_page((unsigned long)(xen_pfn) >> (PAGE_SHIFT - XEN_PAGE_SHIFT)))
#define page_to_xen_pfn(page) \
- (((page_to_pfn(page)) << PAGE_SHIFT) >> XEN_PAGE_SHIFT)
+ ((page_to_pfn(page)) << (PAGE_SHIFT - XEN_PAGE_SHIFT))
#define XEN_PFN_PER_PAGE (PAGE_SIZE / XEN_PAGE_SIZE)
{
switch (type) {
case BPF_TYPE_PROG:
- atomic_inc(&((struct bpf_prog *)raw)->aux->refcnt);
+ raw = bpf_prog_inc(raw);
break;
case BPF_TYPE_MAP:
- bpf_map_inc(raw, true);
+ raw = bpf_map_inc(raw, true);
break;
default:
WARN_ON_ONCE(1);
goto out;
raw = bpf_any_get(inode->i_private, *type);
- touch_atime(&path);
+ if (!IS_ERR(raw))
+ touch_atime(&path);
path_put(&path);
return raw;
return f.file->private_data;
}
-void bpf_map_inc(struct bpf_map *map, bool uref)
+/* prog's and map's refcnt limit */
+#define BPF_MAX_REFCNT 32768
+
+struct bpf_map *bpf_map_inc(struct bpf_map *map, bool uref)
{
- atomic_inc(&map->refcnt);
+ if (atomic_inc_return(&map->refcnt) > BPF_MAX_REFCNT) {
+ atomic_dec(&map->refcnt);
+ return ERR_PTR(-EBUSY);
+ }
if (uref)
atomic_inc(&map->usercnt);
+ return map;
}
struct bpf_map *bpf_map_get_with_uref(u32 ufd)
if (IS_ERR(map))
return map;
- bpf_map_inc(map, true);
+ map = bpf_map_inc(map, true);
fdput(f);
return map;
return f.file->private_data;
}
+struct bpf_prog *bpf_prog_inc(struct bpf_prog *prog)
+{
+ if (atomic_inc_return(&prog->aux->refcnt) > BPF_MAX_REFCNT) {
+ atomic_dec(&prog->aux->refcnt);
+ return ERR_PTR(-EBUSY);
+ }
+ return prog;
+}
+
/* called by sockets/tracing/seccomp before attaching program to an event
* pairs with bpf_prog_put()
*/
if (IS_ERR(prog))
return prog;
- atomic_inc(&prog->aux->refcnt);
+ prog = bpf_prog_inc(prog);
fdput(f);
return prog;
[CONST_IMM] = "imm",
};
-static const struct {
- int map_type;
- int func_id;
-} func_limit[] = {
- {BPF_MAP_TYPE_PROG_ARRAY, BPF_FUNC_tail_call},
- {BPF_MAP_TYPE_PERF_EVENT_ARRAY, BPF_FUNC_perf_event_read},
- {BPF_MAP_TYPE_PERF_EVENT_ARRAY, BPF_FUNC_perf_event_output},
- {BPF_MAP_TYPE_STACK_TRACE, BPF_FUNC_get_stackid},
-};
-
static void print_verifier_state(struct verifier_env *env)
{
enum bpf_reg_type t;
static int check_map_func_compatibility(struct bpf_map *map, int func_id)
{
- bool bool_map, bool_func;
- int i;
-
if (!map)
return 0;
- for (i = 0; i < ARRAY_SIZE(func_limit); i++) {
- bool_map = (map->map_type == func_limit[i].map_type);
- bool_func = (func_id == func_limit[i].func_id);
- /* only when map & func pair match it can continue.
- * don't allow any other map type to be passed into
- * the special func;
- */
- if (bool_func && bool_map != bool_func) {
- verbose("cannot pass map_type %d into func %d\n",
- map->map_type, func_id);
- return -EINVAL;
- }
+ /* We need a two way check, first is from map perspective ... */
+ switch (map->map_type) {
+ case BPF_MAP_TYPE_PROG_ARRAY:
+ if (func_id != BPF_FUNC_tail_call)
+ goto error;
+ break;
+ case BPF_MAP_TYPE_PERF_EVENT_ARRAY:
+ if (func_id != BPF_FUNC_perf_event_read &&
+ func_id != BPF_FUNC_perf_event_output)
+ goto error;
+ break;
+ case BPF_MAP_TYPE_STACK_TRACE:
+ if (func_id != BPF_FUNC_get_stackid)
+ goto error;
+ break;
+ default:
+ break;
+ }
+
+ /* ... and second from the function itself. */
+ switch (func_id) {
+ case BPF_FUNC_tail_call:
+ if (map->map_type != BPF_MAP_TYPE_PROG_ARRAY)
+ goto error;
+ break;
+ case BPF_FUNC_perf_event_read:
+ case BPF_FUNC_perf_event_output:
+ if (map->map_type != BPF_MAP_TYPE_PERF_EVENT_ARRAY)
+ goto error;
+ break;
+ case BPF_FUNC_get_stackid:
+ if (map->map_type != BPF_MAP_TYPE_STACK_TRACE)
+ goto error;
+ break;
+ default:
+ break;
}
return 0;
+error:
+ verbose("cannot pass map_type %d into func %d\n",
+ map->map_type, func_id);
+ return -EINVAL;
}
static int check_call(struct verifier_env *env, int func_id)
if (IS_ERR(map)) {
verbose("fd %d is not pointing to valid bpf_map\n",
insn->imm);
- fdput(f);
return PTR_ERR(map);
}
return -E2BIG;
}
- /* remember this map */
- env->used_maps[env->used_map_cnt++] = map;
-
/* hold the map. If the program is rejected by verifier,
* the map will be released by release_maps() or it
* will be used by the valid program until it's unloaded
* and all maps are released in free_bpf_prog_info()
*/
- bpf_map_inc(map, false);
+ map = bpf_map_inc(map, false);
+ if (IS_ERR(map)) {
+ fdput(f);
+ return PTR_ERR(map);
+ }
+ env->used_maps[env->used_map_cnt++] = map;
+
fdput(f);
next_insn:
insn++;
size_t nbytes, loff_t off, bool threadgroup)
{
struct task_struct *tsk;
+ struct cgroup_subsys *ss;
struct cgroup *cgrp;
pid_t pid;
- int ret;
+ int ssid, ret;
if (kstrtoint(strstrip(buf), 0, &pid) || pid < 0)
return -EINVAL;
rcu_read_unlock();
out_unlock_threadgroup:
percpu_up_write(&cgroup_threadgroup_rwsem);
+ for_each_subsys(ss, ssid)
+ if (ss->post_attach)
+ ss->post_attach();
cgroup_kn_unlock(of->kn);
- cpuset_post_attach_flush();
return ret ?: nbytes;
}
#include <asm/uaccess.h>
#include <linux/atomic.h>
#include <linux/mutex.h>
-#include <linux/workqueue.h>
#include <linux/cgroup.h>
#include <linux/wait.h>
}
}
-void cpuset_post_attach_flush(void)
+static void cpuset_post_attach(void)
{
flush_workqueue(cpuset_migrate_mm_wq);
}
.can_attach = cpuset_can_attach,
.cancel_attach = cpuset_cancel_attach,
.attach = cpuset_attach,
+ .post_attach = cpuset_post_attach,
.bind = cpuset_bind,
.legacy_cftypes = files,
.early_init = true,
if (ret || !write)
return ret;
- if (sysctl_perf_cpu_time_max_percent == 100) {
+ if (sysctl_perf_cpu_time_max_percent == 100 ||
+ sysctl_perf_cpu_time_max_percent == 0) {
printk(KERN_WARNING
"perf: Dynamic interrupt throttling disabled, can hang your system!\n");
WRITE_ONCE(perf_sample_allowed_ns, 0);
* function.
*
* Lock order:
+ * cred_guard_mutex
* task_struct::perf_event_mutex
* perf_event_context::mutex
* perf_event::child_mutex;
find_lively_task_by_vpid(pid_t vpid)
{
struct task_struct *task;
- int err;
rcu_read_lock();
if (!vpid)
if (!task)
return ERR_PTR(-ESRCH);
- /* Reuse ptrace permission checks for now. */
- err = -EACCES;
- if (!ptrace_may_access(task, PTRACE_MODE_READ_REALCREDS))
- goto errout;
-
return task;
-errout:
- put_task_struct(task);
- return ERR_PTR(err);
-
}
/*
get_online_cpus();
+ if (task) {
+ err = mutex_lock_interruptible(&task->signal->cred_guard_mutex);
+ if (err)
+ goto err_cpus;
+
+ /*
+ * Reuse ptrace permission checks for now.
+ *
+ * We must hold cred_guard_mutex across this and any potential
+ * perf_install_in_context() call for this new event to
+ * serialize against exec() altering our credentials (and the
+ * perf_event_exit_task() that could imply).
+ */
+ err = -EACCES;
+ if (!ptrace_may_access(task, PTRACE_MODE_READ_REALCREDS))
+ goto err_cred;
+ }
+
if (flags & PERF_FLAG_PID_CGROUP)
cgroup_fd = pid;
NULL, NULL, cgroup_fd);
if (IS_ERR(event)) {
err = PTR_ERR(event);
- goto err_cpus;
+ goto err_cred;
}
if (is_sampling_event(event)) {
goto err_context;
}
- if (task) {
- put_task_struct(task);
- task = NULL;
- }
-
/*
* Look up the group leader (we will attach this event to it):
*/
WARN_ON_ONCE(ctx->parent_ctx);
+ /*
+ * This is the point on no return; we cannot fail hereafter. This is
+ * where we start modifying current state.
+ */
+
if (move_group) {
/*
* See perf_event_ctx_lock() for comments on the details
mutex_unlock(&gctx->mutex);
mutex_unlock(&ctx->mutex);
+ if (task) {
+ mutex_unlock(&task->signal->cred_guard_mutex);
+ put_task_struct(task);
+ }
+
put_online_cpus();
mutex_lock(¤t->perf_event_mutex);
*/
if (!event_file)
free_event(event);
+err_cred:
+ if (task)
+ mutex_unlock(&task->signal->cred_guard_mutex);
err_cpus:
put_online_cpus();
err_task:
/*
* When a child task exits, feed back event values to parent events.
+ *
+ * Can be called with cred_guard_mutex held when called from
+ * install_exec_creds().
*/
void perf_event_exit_task(struct task_struct *child)
{
#define pr_fmt(fmt) "kcov: " fmt
+#define DISABLE_BRANCH_PROFILING
#include <linux/compiler.h>
#include <linux/types.h>
#include <linux/file.h>
* Entry point from instrumented code.
* This is called once per basic-block/edge.
*/
-void __sanitizer_cov_trace_pc(void)
+void notrace __sanitizer_cov_trace_pc(void)
{
struct task_struct *t;
enum kcov_mode mode;
VMCOREINFO_OFFSET(page, lru);
VMCOREINFO_OFFSET(page, _mapcount);
VMCOREINFO_OFFSET(page, private);
+ VMCOREINFO_OFFSET(page, compound_dtor);
+ VMCOREINFO_OFFSET(page, compound_order);
+ VMCOREINFO_OFFSET(page, compound_head);
VMCOREINFO_OFFSET(pglist_data, node_zones);
VMCOREINFO_OFFSET(pglist_data, nr_zones);
#ifdef CONFIG_FLAT_NODE_MEM_MAP
#ifdef CONFIG_X86
VMCOREINFO_NUMBER(KERNEL_IMAGE_SIZE);
#endif
-#ifdef CONFIG_HUGETLBFS
- VMCOREINFO_SYMBOL(free_huge_page);
+#ifdef CONFIG_HUGETLB_PAGE
+ VMCOREINFO_NUMBER(HUGETLB_PAGE_DTOR);
#endif
arch_crash_save_vmcoreinfo();
chain->irq_context = hlock->irq_context;
i = get_first_held_lock(curr, hlock);
chain->depth = curr->lockdep_depth + 1 - i;
+
+ BUILD_BUG_ON((1UL << 24) <= ARRAY_SIZE(chain_hlocks));
+ BUILD_BUG_ON((1UL << 6) <= ARRAY_SIZE(curr->held_locks));
+ BUILD_BUG_ON((1UL << 8*sizeof(chain_hlocks[0])) <= ARRAY_SIZE(lock_classes));
+
if (likely(nr_chain_hlocks + chain->depth <= MAX_LOCKDEP_CHAIN_HLOCKS)) {
chain->base = nr_chain_hlocks;
- nr_chain_hlocks += chain->depth;
for (j = 0; j < chain->depth - 1; j++, i++) {
int lock_id = curr->held_locks[i].class_idx - 1;
chain_hlocks[chain->base + j] = lock_id;
}
chain_hlocks[chain->base + j] = class - lock_classes;
}
+
+ if (nr_chain_hlocks < MAX_LOCKDEP_CHAIN_HLOCKS)
+ nr_chain_hlocks += chain->depth;
+
+#ifdef CONFIG_DEBUG_LOCKDEP
+ /*
+ * Important for check_no_collision().
+ */
+ if (unlikely(nr_chain_hlocks > MAX_LOCKDEP_CHAIN_HLOCKS)) {
+ if (debug_locks_off_graph_unlock())
+ return 0;
+
+ print_lockdep_off("BUG: MAX_LOCKDEP_CHAIN_HLOCKS too low!");
+ dump_stack();
+ return 0;
+ }
+#endif
+
hlist_add_head_rcu(&chain->entry, hash_head);
debug_atomic_inc(chain_lookup_misses);
inc_chains();
return 1;
}
+static inline unsigned int task_irq_context(struct task_struct *task)
+{
+ return 2 * !!task->hardirq_context + !!task->softirq_context;
+}
+
static int separate_irq_context(struct task_struct *curr,
struct held_lock *hlock)
{
/*
* Keep track of points where we cross into an interrupt context:
*/
- hlock->irq_context = 2*(curr->hardirq_context ? 1 : 0) +
- curr->softirq_context;
if (depth) {
struct held_lock *prev_hlock;
return 1;
}
+static inline unsigned int task_irq_context(struct task_struct *task)
+{
+ return 0;
+}
+
static inline int separate_irq_context(struct task_struct *curr,
struct held_lock *hlock)
{
hlock->acquire_ip = ip;
hlock->instance = lock;
hlock->nest_lock = nest_lock;
+ hlock->irq_context = task_irq_context(curr);
hlock->trylock = trylock;
hlock->read = read;
hlock->check = check;
int i;
if (v == SEQ_START_TOKEN) {
+ if (nr_chain_hlocks > MAX_LOCKDEP_CHAIN_HLOCKS)
+ seq_printf(m, "(buggered) ");
seq_printf(m, "all lock chains:\n");
return 0;
}
obj-$(CONFIG_SCHED_DEBUG) += debug.o
obj-$(CONFIG_CGROUP_CPUACCT) += cpuacct.o
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
+obj-$(CONFIG_CPU_FREQ_GOV_SCHEDUTIL) += cpufreq_schedutil.o
return false;
/*
- * FIFO realtime policy runs the highest priority task (after DEADLINE).
- * Other runnable tasks are of a lower priority. The scheduler tick
- * isn't needed.
- */
- fifo_nr_running = rq->rt.rt_nr_running - rq->rt.rr_nr_running;
- if (fifo_nr_running)
- return true;
-
- /*
- * Round-robin realtime tasks time slice with other tasks at the same
- * realtime priority.
+ * If there are more than one RR tasks, we need the tick to effect the
+ * actual RR behaviour.
*/
if (rq->rt.rr_nr_running) {
if (rq->rt.rr_nr_running == 1)
return false;
}
- /* Normal multitasking need periodic preemption checks */
- if (rq->cfs.nr_running > 1)
+ /*
+ * If there's no RR tasks, but FIFO tasks, we can skip the tick, no
+ * forced preemption between FIFO tasks.
+ */
+ fifo_nr_running = rq->rt.rt_nr_running - rq->rt.rr_nr_running;
+ if (fifo_nr_running)
+ return true;
+
+ /*
+ * If there are no DL,RR/FIFO tasks, there must only be CFS tasks left;
+ * if there's more than one we need the tick for involuntary
+ * preemption.
+ */
+ if (rq->nr_running > 1)
return false;
return true;
DEFINE_PER_CPU(struct update_util_data *, cpufreq_update_util_data);
/**
- * cpufreq_set_update_util_data - Populate the CPU's update_util_data pointer.
+ * cpufreq_add_update_util_hook - Populate the CPU's update_util_data pointer.
* @cpu: The CPU to set the pointer for.
* @data: New pointer value.
+ * @func: Callback function to set for the CPU.
*
- * Set and publish the update_util_data pointer for the given CPU. That pointer
- * points to a struct update_util_data object containing a callback function
- * to call from cpufreq_update_util(). That function will be called from an RCU
- * read-side critical section, so it must not sleep.
+ * Set and publish the update_util_data pointer for the given CPU.
*
- * Callers must use RCU-sched callbacks to free any memory that might be
- * accessed via the old update_util_data pointer or invoke synchronize_sched()
- * right after this function to avoid use-after-free.
+ * The update_util_data pointer of @cpu is set to @data and the callback
+ * function pointer in the target struct update_util_data is set to @func.
+ * That function will be called by cpufreq_update_util() from RCU-sched
+ * read-side critical sections, so it must not sleep. @data will always be
+ * passed to it as the first argument which allows the function to get to the
+ * target update_util_data structure and its container.
+ *
+ * The update_util_data pointer of @cpu must be NULL when this function is
+ * called or it will WARN() and return with no effect.
*/
-void cpufreq_set_update_util_data(int cpu, struct update_util_data *data)
+void cpufreq_add_update_util_hook(int cpu, struct update_util_data *data,
+ void (*func)(struct update_util_data *data, u64 time,
+ unsigned long util, unsigned long max))
{
- if (WARN_ON(data && !data->func))
+ if (WARN_ON(!data || !func))
return;
+ if (WARN_ON(per_cpu(cpufreq_update_util_data, cpu)))
+ return;
+
+ data->func = func;
rcu_assign_pointer(per_cpu(cpufreq_update_util_data, cpu), data);
}
-EXPORT_SYMBOL_GPL(cpufreq_set_update_util_data);
+EXPORT_SYMBOL_GPL(cpufreq_add_update_util_hook);
+
+/**
+ * cpufreq_remove_update_util_hook - Clear the CPU's update_util_data pointer.
+ * @cpu: The CPU to clear the pointer for.
+ *
+ * Clear the update_util_data pointer for the given CPU.
+ *
+ * Callers must use RCU-sched callbacks to free any memory that might be
+ * accessed via the old update_util_data pointer or invoke synchronize_sched()
+ * right after this function to avoid use-after-free.
+ */
+void cpufreq_remove_update_util_hook(int cpu)
+{
+ rcu_assign_pointer(per_cpu(cpufreq_update_util_data, cpu), NULL);
+}
+EXPORT_SYMBOL_GPL(cpufreq_remove_update_util_hook);
--- /dev/null
+/*
+ * CPUFreq governor based on scheduler-provided CPU utilization data.
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <trace/events/power.h>
+
+#include "sched.h"
+
+struct sugov_tunables {
+ struct gov_attr_set attr_set;
+ unsigned int rate_limit_us;
+};
+
+struct sugov_policy {
+ struct cpufreq_policy *policy;
+
+ struct sugov_tunables *tunables;
+ struct list_head tunables_hook;
+
+ raw_spinlock_t update_lock; /* For shared policies */
+ u64 last_freq_update_time;
+ s64 freq_update_delay_ns;
+ unsigned int next_freq;
+
+ /* The next fields are only needed if fast switch cannot be used. */
+ struct irq_work irq_work;
+ struct work_struct work;
+ struct mutex work_lock;
+ bool work_in_progress;
+
+ bool need_freq_update;
+};
+
+struct sugov_cpu {
+ struct update_util_data update_util;
+ struct sugov_policy *sg_policy;
+
+ /* The fields below are only needed when sharing a policy. */
+ unsigned long util;
+ unsigned long max;
+ u64 last_update;
+};
+
+static DEFINE_PER_CPU(struct sugov_cpu, sugov_cpu);
+
+/************************ Governor internals ***********************/
+
+static bool sugov_should_update_freq(struct sugov_policy *sg_policy, u64 time)
+{
+ s64 delta_ns;
+
+ if (sg_policy->work_in_progress)
+ return false;
+
+ if (unlikely(sg_policy->need_freq_update)) {
+ sg_policy->need_freq_update = false;
+ /*
+ * This happens when limits change, so forget the previous
+ * next_freq value and force an update.
+ */
+ sg_policy->next_freq = UINT_MAX;
+ return true;
+ }
+
+ delta_ns = time - sg_policy->last_freq_update_time;
+ return delta_ns >= sg_policy->freq_update_delay_ns;
+}
+
+static void sugov_update_commit(struct sugov_policy *sg_policy, u64 time,
+ unsigned int next_freq)
+{
+ struct cpufreq_policy *policy = sg_policy->policy;
+
+ sg_policy->last_freq_update_time = time;
+
+ if (policy->fast_switch_enabled) {
+ if (sg_policy->next_freq == next_freq) {
+ trace_cpu_frequency(policy->cur, smp_processor_id());
+ return;
+ }
+ sg_policy->next_freq = next_freq;
+ next_freq = cpufreq_driver_fast_switch(policy, next_freq);
+ if (next_freq == CPUFREQ_ENTRY_INVALID)
+ return;
+
+ policy->cur = next_freq;
+ trace_cpu_frequency(next_freq, smp_processor_id());
+ } else if (sg_policy->next_freq != next_freq) {
+ sg_policy->next_freq = next_freq;
+ sg_policy->work_in_progress = true;
+ irq_work_queue(&sg_policy->irq_work);
+ }
+}
+
+/**
+ * get_next_freq - Compute a new frequency for a given cpufreq policy.
+ * @policy: cpufreq policy object to compute the new frequency for.
+ * @util: Current CPU utilization.
+ * @max: CPU capacity.
+ *
+ * If the utilization is frequency-invariant, choose the new frequency to be
+ * proportional to it, that is
+ *
+ * next_freq = C * max_freq * util / max
+ *
+ * Otherwise, approximate the would-be frequency-invariant utilization by
+ * util_raw * (curr_freq / max_freq) which leads to
+ *
+ * next_freq = C * curr_freq * util_raw / max
+ *
+ * Take C = 1.25 for the frequency tipping point at (util / max) = 0.8.
+ */
+static unsigned int get_next_freq(struct cpufreq_policy *policy,
+ unsigned long util, unsigned long max)
+{
+ unsigned int freq = arch_scale_freq_invariant() ?
+ policy->cpuinfo.max_freq : policy->cur;
+
+ return (freq + (freq >> 2)) * util / max;
+}
+
+static void sugov_update_single(struct update_util_data *hook, u64 time,
+ unsigned long util, unsigned long max)
+{
+ struct sugov_cpu *sg_cpu = container_of(hook, struct sugov_cpu, update_util);
+ struct sugov_policy *sg_policy = sg_cpu->sg_policy;
+ struct cpufreq_policy *policy = sg_policy->policy;
+ unsigned int next_f;
+
+ if (!sugov_should_update_freq(sg_policy, time))
+ return;
+
+ next_f = util == ULONG_MAX ? policy->cpuinfo.max_freq :
+ get_next_freq(policy, util, max);
+ sugov_update_commit(sg_policy, time, next_f);
+}
+
+static unsigned int sugov_next_freq_shared(struct sugov_policy *sg_policy,
+ unsigned long util, unsigned long max)
+{
+ struct cpufreq_policy *policy = sg_policy->policy;
+ unsigned int max_f = policy->cpuinfo.max_freq;
+ u64 last_freq_update_time = sg_policy->last_freq_update_time;
+ unsigned int j;
+
+ if (util == ULONG_MAX)
+ return max_f;
+
+ for_each_cpu(j, policy->cpus) {
+ struct sugov_cpu *j_sg_cpu;
+ unsigned long j_util, j_max;
+ s64 delta_ns;
+
+ if (j == smp_processor_id())
+ continue;
+
+ j_sg_cpu = &per_cpu(sugov_cpu, j);
+ /*
+ * If the CPU utilization was last updated before the previous
+ * frequency update and the time elapsed between the last update
+ * of the CPU utilization and the last frequency update is long
+ * enough, don't take the CPU into account as it probably is
+ * idle now.
+ */
+ delta_ns = last_freq_update_time - j_sg_cpu->last_update;
+ if (delta_ns > TICK_NSEC)
+ continue;
+
+ j_util = j_sg_cpu->util;
+ if (j_util == ULONG_MAX)
+ return max_f;
+
+ j_max = j_sg_cpu->max;
+ if (j_util * max > j_max * util) {
+ util = j_util;
+ max = j_max;
+ }
+ }
+
+ return get_next_freq(policy, util, max);
+}
+
+static void sugov_update_shared(struct update_util_data *hook, u64 time,
+ unsigned long util, unsigned long max)
+{
+ struct sugov_cpu *sg_cpu = container_of(hook, struct sugov_cpu, update_util);
+ struct sugov_policy *sg_policy = sg_cpu->sg_policy;
+ unsigned int next_f;
+
+ raw_spin_lock(&sg_policy->update_lock);
+
+ sg_cpu->util = util;
+ sg_cpu->max = max;
+ sg_cpu->last_update = time;
+
+ if (sugov_should_update_freq(sg_policy, time)) {
+ next_f = sugov_next_freq_shared(sg_policy, util, max);
+ sugov_update_commit(sg_policy, time, next_f);
+ }
+
+ raw_spin_unlock(&sg_policy->update_lock);
+}
+
+static void sugov_work(struct work_struct *work)
+{
+ struct sugov_policy *sg_policy = container_of(work, struct sugov_policy, work);
+
+ mutex_lock(&sg_policy->work_lock);
+ __cpufreq_driver_target(sg_policy->policy, sg_policy->next_freq,
+ CPUFREQ_RELATION_L);
+ mutex_unlock(&sg_policy->work_lock);
+
+ sg_policy->work_in_progress = false;
+}
+
+static void sugov_irq_work(struct irq_work *irq_work)
+{
+ struct sugov_policy *sg_policy;
+
+ sg_policy = container_of(irq_work, struct sugov_policy, irq_work);
+ schedule_work_on(smp_processor_id(), &sg_policy->work);
+}
+
+/************************** sysfs interface ************************/
+
+static struct sugov_tunables *global_tunables;
+static DEFINE_MUTEX(global_tunables_lock);
+
+static inline struct sugov_tunables *to_sugov_tunables(struct gov_attr_set *attr_set)
+{
+ return container_of(attr_set, struct sugov_tunables, attr_set);
+}
+
+static ssize_t rate_limit_us_show(struct gov_attr_set *attr_set, char *buf)
+{
+ struct sugov_tunables *tunables = to_sugov_tunables(attr_set);
+
+ return sprintf(buf, "%u\n", tunables->rate_limit_us);
+}
+
+static ssize_t rate_limit_us_store(struct gov_attr_set *attr_set, const char *buf,
+ size_t count)
+{
+ struct sugov_tunables *tunables = to_sugov_tunables(attr_set);
+ struct sugov_policy *sg_policy;
+ unsigned int rate_limit_us;
+
+ if (kstrtouint(buf, 10, &rate_limit_us))
+ return -EINVAL;
+
+ tunables->rate_limit_us = rate_limit_us;
+
+ list_for_each_entry(sg_policy, &attr_set->policy_list, tunables_hook)
+ sg_policy->freq_update_delay_ns = rate_limit_us * NSEC_PER_USEC;
+
+ return count;
+}
+
+static struct governor_attr rate_limit_us = __ATTR_RW(rate_limit_us);
+
+static struct attribute *sugov_attributes[] = {
+ &rate_limit_us.attr,
+ NULL
+};
+
+static struct kobj_type sugov_tunables_ktype = {
+ .default_attrs = sugov_attributes,
+ .sysfs_ops = &governor_sysfs_ops,
+};
+
+/********************** cpufreq governor interface *********************/
+
+static struct cpufreq_governor schedutil_gov;
+
+static struct sugov_policy *sugov_policy_alloc(struct cpufreq_policy *policy)
+{
+ struct sugov_policy *sg_policy;
+
+ sg_policy = kzalloc(sizeof(*sg_policy), GFP_KERNEL);
+ if (!sg_policy)
+ return NULL;
+
+ sg_policy->policy = policy;
+ init_irq_work(&sg_policy->irq_work, sugov_irq_work);
+ INIT_WORK(&sg_policy->work, sugov_work);
+ mutex_init(&sg_policy->work_lock);
+ raw_spin_lock_init(&sg_policy->update_lock);
+ return sg_policy;
+}
+
+static void sugov_policy_free(struct sugov_policy *sg_policy)
+{
+ mutex_destroy(&sg_policy->work_lock);
+ kfree(sg_policy);
+}
+
+static struct sugov_tunables *sugov_tunables_alloc(struct sugov_policy *sg_policy)
+{
+ struct sugov_tunables *tunables;
+
+ tunables = kzalloc(sizeof(*tunables), GFP_KERNEL);
+ if (tunables) {
+ gov_attr_set_init(&tunables->attr_set, &sg_policy->tunables_hook);
+ if (!have_governor_per_policy())
+ global_tunables = tunables;
+ }
+ return tunables;
+}
+
+static void sugov_tunables_free(struct sugov_tunables *tunables)
+{
+ if (!have_governor_per_policy())
+ global_tunables = NULL;
+
+ kfree(tunables);
+}
+
+static int sugov_init(struct cpufreq_policy *policy)
+{
+ struct sugov_policy *sg_policy;
+ struct sugov_tunables *tunables;
+ unsigned int lat;
+ int ret = 0;
+
+ /* State should be equivalent to EXIT */
+ if (policy->governor_data)
+ return -EBUSY;
+
+ sg_policy = sugov_policy_alloc(policy);
+ if (!sg_policy)
+ return -ENOMEM;
+
+ mutex_lock(&global_tunables_lock);
+
+ if (global_tunables) {
+ if (WARN_ON(have_governor_per_policy())) {
+ ret = -EINVAL;
+ goto free_sg_policy;
+ }
+ policy->governor_data = sg_policy;
+ sg_policy->tunables = global_tunables;
+
+ gov_attr_set_get(&global_tunables->attr_set, &sg_policy->tunables_hook);
+ goto out;
+ }
+
+ tunables = sugov_tunables_alloc(sg_policy);
+ if (!tunables) {
+ ret = -ENOMEM;
+ goto free_sg_policy;
+ }
+
+ tunables->rate_limit_us = LATENCY_MULTIPLIER;
+ lat = policy->cpuinfo.transition_latency / NSEC_PER_USEC;
+ if (lat)
+ tunables->rate_limit_us *= lat;
+
+ policy->governor_data = sg_policy;
+ sg_policy->tunables = tunables;
+
+ ret = kobject_init_and_add(&tunables->attr_set.kobj, &sugov_tunables_ktype,
+ get_governor_parent_kobj(policy), "%s",
+ schedutil_gov.name);
+ if (ret)
+ goto fail;
+
+ out:
+ mutex_unlock(&global_tunables_lock);
+
+ cpufreq_enable_fast_switch(policy);
+ return 0;
+
+ fail:
+ policy->governor_data = NULL;
+ sugov_tunables_free(tunables);
+
+ free_sg_policy:
+ mutex_unlock(&global_tunables_lock);
+
+ sugov_policy_free(sg_policy);
+ pr_err("cpufreq: schedutil governor initialization failed (error %d)\n", ret);
+ return ret;
+}
+
+static int sugov_exit(struct cpufreq_policy *policy)
+{
+ struct sugov_policy *sg_policy = policy->governor_data;
+ struct sugov_tunables *tunables = sg_policy->tunables;
+ unsigned int count;
+
+ cpufreq_disable_fast_switch(policy);
+
+ mutex_lock(&global_tunables_lock);
+
+ count = gov_attr_set_put(&tunables->attr_set, &sg_policy->tunables_hook);
+ policy->governor_data = NULL;
+ if (!count)
+ sugov_tunables_free(tunables);
+
+ mutex_unlock(&global_tunables_lock);
+
+ sugov_policy_free(sg_policy);
+ return 0;
+}
+
+static int sugov_start(struct cpufreq_policy *policy)
+{
+ struct sugov_policy *sg_policy = policy->governor_data;
+ unsigned int cpu;
+
+ sg_policy->freq_update_delay_ns = sg_policy->tunables->rate_limit_us * NSEC_PER_USEC;
+ sg_policy->last_freq_update_time = 0;
+ sg_policy->next_freq = UINT_MAX;
+ sg_policy->work_in_progress = false;
+ sg_policy->need_freq_update = false;
+
+ for_each_cpu(cpu, policy->cpus) {
+ struct sugov_cpu *sg_cpu = &per_cpu(sugov_cpu, cpu);
+
+ sg_cpu->sg_policy = sg_policy;
+ if (policy_is_shared(policy)) {
+ sg_cpu->util = ULONG_MAX;
+ sg_cpu->max = 0;
+ sg_cpu->last_update = 0;
+ cpufreq_add_update_util_hook(cpu, &sg_cpu->update_util,
+ sugov_update_shared);
+ } else {
+ cpufreq_add_update_util_hook(cpu, &sg_cpu->update_util,
+ sugov_update_single);
+ }
+ }
+ return 0;
+}
+
+static int sugov_stop(struct cpufreq_policy *policy)
+{
+ struct sugov_policy *sg_policy = policy->governor_data;
+ unsigned int cpu;
+
+ for_each_cpu(cpu, policy->cpus)
+ cpufreq_remove_update_util_hook(cpu);
+
+ synchronize_sched();
+
+ irq_work_sync(&sg_policy->irq_work);
+ cancel_work_sync(&sg_policy->work);
+ return 0;
+}
+
+static int sugov_limits(struct cpufreq_policy *policy)
+{
+ struct sugov_policy *sg_policy = policy->governor_data;
+
+ if (!policy->fast_switch_enabled) {
+ mutex_lock(&sg_policy->work_lock);
+
+ if (policy->max < policy->cur)
+ __cpufreq_driver_target(policy, policy->max,
+ CPUFREQ_RELATION_H);
+ else if (policy->min > policy->cur)
+ __cpufreq_driver_target(policy, policy->min,
+ CPUFREQ_RELATION_L);
+
+ mutex_unlock(&sg_policy->work_lock);
+ }
+
+ sg_policy->need_freq_update = true;
+ return 0;
+}
+
+int sugov_governor(struct cpufreq_policy *policy, unsigned int event)
+{
+ if (event == CPUFREQ_GOV_POLICY_INIT) {
+ return sugov_init(policy);
+ } else if (policy->governor_data) {
+ switch (event) {
+ case CPUFREQ_GOV_POLICY_EXIT:
+ return sugov_exit(policy);
+ case CPUFREQ_GOV_START:
+ return sugov_start(policy);
+ case CPUFREQ_GOV_STOP:
+ return sugov_stop(policy);
+ case CPUFREQ_GOV_LIMITS:
+ return sugov_limits(policy);
+ }
+ }
+ return -EINVAL;
+}
+
+static struct cpufreq_governor schedutil_gov = {
+ .name = "schedutil",
+ .governor = sugov_governor,
+ .owner = THIS_MODULE,
+};
+
+static int __init sugov_module_init(void)
+{
+ return cpufreq_register_governor(&schedutil_gov);
+}
+
+static void __exit sugov_module_exit(void)
+{
+ cpufreq_unregister_governor(&schedutil_gov);
+}
+
+MODULE_AUTHOR("Rafael J. Wysocki <rafael.j.wysocki@intel.com>");
+MODULE_DESCRIPTION("Utilization-based CPU frequency selection");
+MODULE_LICENSE("GPL");
+
+#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL
+struct cpufreq_governor *cpufreq_default_governor(void)
+{
+ return &schedutil_gov;
+}
+
+fs_initcall(sugov_module_init);
+#else
+module_init(sugov_module_init);
+#endif
+module_exit(sugov_module_exit);
static inline void cpufreq_trigger_update(u64 time) {}
#endif /* CONFIG_CPU_FREQ */
+#ifdef arch_scale_freq_capacity
+#ifndef arch_scale_freq_invariant
+#define arch_scale_freq_invariant() (true)
+#endif
+#else /* arch_scale_freq_capacity */
+#define arch_scale_freq_invariant() (false)
+#endif
+
static inline void account_reset_rq(struct rq *rq)
{
#ifdef CONFIG_IRQ_TIME_ACCOUNTING
EXPORT_TRACEPOINT_SYMBOL_GPL(suspend_resume);
EXPORT_TRACEPOINT_SYMBOL_GPL(cpu_idle);
+EXPORT_TRACEPOINT_SYMBOL_GPL(cpu_frequency);
EXPORT_TRACEPOINT_SYMBOL_GPL(powernv_throttle);
trace_create_file("filter", 0644, file->dir, file,
&ftrace_event_filter_fops);
- trace_create_file("trigger", 0644, file->dir, file,
- &event_trigger_fops);
+ /*
+ * Only event directories that can be enabled should have
+ * triggers.
+ */
+ if (!(call->flags & TRACE_EVENT_FL_IGNORE_ENABLE))
+ trace_create_file("trigger", 0644, file->dir, file,
+ &event_trigger_fops);
trace_create_file("format", 0444, file->dir, call,
&ftrace_event_format_fops);
*/
smp_wmb();
set_work_data(work, (unsigned long)pool_id << WORK_OFFQ_POOL_SHIFT, 0);
+ /*
+ * The following mb guarantees that previous clear of a PENDING bit
+ * will not be reordered with any speculative LOADS or STORES from
+ * work->current_func, which is executed afterwards. This possible
+ * reordering can lead to a missed execution on attempt to qeueue
+ * the same @work. E.g. consider this case:
+ *
+ * CPU#0 CPU#1
+ * ---------------------------- --------------------------------
+ *
+ * 1 STORE event_indicated
+ * 2 queue_work_on() {
+ * 3 test_and_set_bit(PENDING)
+ * 4 } set_..._and_clear_pending() {
+ * 5 set_work_data() # clear bit
+ * 6 smp_mb()
+ * 7 work->current_func() {
+ * 8 LOAD event_indicated
+ * }
+ *
+ * Without an explicit full barrier speculative LOAD on line 8 can
+ * be executed before CPU#0 does STORE on line 1. If that happens,
+ * CPU#0 observes the PENDING bit is still set and new execution of
+ * a @work is not queued in a hope, that CPU#1 will eventually
+ * finish the queued @work. Meanwhile CPU#1 does not see
+ * event_indicated is set, because speculative LOAD was executed
+ * before actual STORE.
+ */
+ smp_mb();
}
static void clear_work_data(struct work_struct *work)
#define DEPOT_STACK_BITS (sizeof(depot_stack_handle_t) * 8)
+#define STACK_ALLOC_NULL_PROTECTION_BITS 1
#define STACK_ALLOC_ORDER 2 /* 'Slab' size order for stack depot, 4 pages */
#define STACK_ALLOC_SIZE (1LL << (PAGE_SHIFT + STACK_ALLOC_ORDER))
#define STACK_ALLOC_ALIGN 4
#define STACK_ALLOC_OFFSET_BITS (STACK_ALLOC_ORDER + PAGE_SHIFT - \
STACK_ALLOC_ALIGN)
-#define STACK_ALLOC_INDEX_BITS (DEPOT_STACK_BITS - STACK_ALLOC_OFFSET_BITS)
+#define STACK_ALLOC_INDEX_BITS (DEPOT_STACK_BITS - \
+ STACK_ALLOC_NULL_PROTECTION_BITS - STACK_ALLOC_OFFSET_BITS)
#define STACK_ALLOC_SLABS_CAP 1024
#define STACK_ALLOC_MAX_SLABS \
(((1LL << (STACK_ALLOC_INDEX_BITS)) < STACK_ALLOC_SLABS_CAP) ? \
struct {
u32 slabindex : STACK_ALLOC_INDEX_BITS;
u32 offset : STACK_ALLOC_OFFSET_BITS;
+ u32 valid : STACK_ALLOC_NULL_PROTECTION_BITS;
};
};
stack->size = size;
stack->handle.slabindex = depot_index;
stack->handle.offset = depot_offset >> STACK_ALLOC_ALIGN;
+ stack->handle.valid = 1;
memcpy(stack->entries, entries, size * sizeof(unsigned long));
depot_offset += required_size;
goto fast_exit;
hash = hash_stack(trace->entries, trace->nr_entries);
- /* Bad luck, we won't store this stack. */
- if (hash == 0)
- goto exit;
-
bucket = &stack_table[hash & STACK_HASH_MASK];
/*
pfn = isolate_migratepages_block(cc, pfn, block_end_pfn,
ISOLATE_UNEVICTABLE);
- /*
- * In case of fatal failure, release everything that might
- * have been isolated in the previous iteration, and signal
- * the failure back to caller.
- */
- if (!pfn) {
- putback_movable_pages(&cc->migratepages);
- cc->nr_migratepages = 0;
+ if (!pfn)
break;
- }
if (cc->nr_migratepages == COMPACT_CLUSTER_MAX)
break;
static inline bool kcompactd_work_requested(pg_data_t *pgdat)
{
- return pgdat->kcompactd_max_order > 0;
+ return pgdat->kcompactd_max_order > 0 || kthread_should_stop();
}
static bool kcompactd_node_suitable(pg_data_t *pgdat)
INIT_LIST_HEAD(&cc.freepages);
INIT_LIST_HEAD(&cc.migratepages);
+ if (kthread_should_stop())
+ return;
status = compact_zone(zone, &cc);
if (zone_watermark_ok(zone, cc.order, low_wmark_pages(zone),
return READ_ONCE(huge_zero_page);
}
-static void put_huge_zero_page(void)
+void put_huge_zero_page(void)
{
/*
* Counter should never go to zero here. Only shrinker can put
if (vma_is_dax(vma)) {
spin_unlock(ptl);
if (is_huge_zero_pmd(orig_pmd))
- put_huge_zero_page();
+ tlb_remove_page(tlb, pmd_page(orig_pmd));
} else if (is_huge_zero_pmd(orig_pmd)) {
pte_free(tlb->mm, pgtable_trans_huge_withdraw(tlb->mm, pmd));
atomic_long_dec(&tlb->mm->nr_ptes);
spin_unlock(ptl);
- put_huge_zero_page();
+ tlb_remove_page(tlb, pmd_page(orig_pmd));
} else {
struct page *page = pmd_page(orig_pmd);
page_remove_rmap(page, true);
* page fault if needed.
*/
return 0;
- if (vma->vm_ops)
+ if (vma->vm_ops || (vm_flags & VM_NO_THP))
/* khugepaged not yet working on file or special mappings */
return 0;
- VM_BUG_ON_VMA(vm_flags & VM_NO_THP, vma);
hstart = (vma->vm_start + ~HPAGE_PMD_MASK) & HPAGE_PMD_MASK;
hend = vma->vm_end & HPAGE_PMD_MASK;
if (hstart < hend)
return false;
if (is_vma_temporary_stack(vma))
return false;
- VM_BUG_ON_VMA(vma->vm_flags & VM_NO_THP, vma);
- return true;
+ return !(vma->vm_flags & VM_NO_THP);
}
static void collapse_huge_page(struct mm_struct *mm,
}
}
- pr_info("%lu of %lu THP split", split, total);
+ pr_info("%lu of %lu THP split\n", split, total);
return 0;
}
{
void *ret;
- ret = debugfs_create_file("split_huge_pages", 0644, NULL, NULL,
+ ret = debugfs_create_file("split_huge_pages", 0200, NULL, NULL,
&split_huge_pages_fops);
if (!ret)
pr_warn("Failed to create split_huge_pages in debugfs");
/* "mc" and its members are protected by cgroup_mutex */
static struct move_charge_struct {
spinlock_t lock; /* for from, to */
+ struct mm_struct *mm;
struct mem_cgroup *from;
struct mem_cgroup *to;
unsigned long flags;
static void mem_cgroup_clear_mc(void)
{
+ struct mm_struct *mm = mc.mm;
+
/*
* we must clear moving_task before waking up waiters at the end of
* task migration.
spin_lock(&mc.lock);
mc.from = NULL;
mc.to = NULL;
+ mc.mm = NULL;
spin_unlock(&mc.lock);
+
+ mmput(mm);
}
static int mem_cgroup_can_attach(struct cgroup_taskset *tset)
VM_BUG_ON(mc.moved_swap);
spin_lock(&mc.lock);
+ mc.mm = mm;
mc.from = from;
mc.to = memcg;
mc.flags = move_flags;
ret = mem_cgroup_precharge_mc(mm);
if (ret)
mem_cgroup_clear_mc();
+ } else {
+ mmput(mm);
}
- mmput(mm);
return ret;
}
return ret;
}
-static void mem_cgroup_move_charge(struct mm_struct *mm)
+static void mem_cgroup_move_charge(void)
{
struct mm_walk mem_cgroup_move_charge_walk = {
.pmd_entry = mem_cgroup_move_charge_pte_range,
- .mm = mm,
+ .mm = mc.mm,
};
lru_add_drain_all();
atomic_inc(&mc.from->moving_account);
synchronize_rcu();
retry:
- if (unlikely(!down_read_trylock(&mm->mmap_sem))) {
+ if (unlikely(!down_read_trylock(&mc.mm->mmap_sem))) {
/*
* Someone who are holding the mmap_sem might be waiting in
* waitq. So we cancel all extra charges, wake up all waiters,
* additional charge, the page walk just aborts.
*/
walk_page_range(0, ~0UL, &mem_cgroup_move_charge_walk);
- up_read(&mm->mmap_sem);
+ up_read(&mc.mm->mmap_sem);
atomic_dec(&mc.from->moving_account);
}
-static void mem_cgroup_move_task(struct cgroup_taskset *tset)
+static void mem_cgroup_move_task(void)
{
- struct cgroup_subsys_state *css;
- struct task_struct *p = cgroup_taskset_first(tset, &css);
- struct mm_struct *mm = get_task_mm(p);
-
- if (mm) {
- if (mc.to)
- mem_cgroup_move_charge(mm);
- mmput(mm);
- }
- if (mc.to)
+ if (mc.to) {
+ mem_cgroup_move_charge();
mem_cgroup_clear_mc();
+ }
}
#else /* !CONFIG_MMU */
static int mem_cgroup_can_attach(struct cgroup_taskset *tset)
static void mem_cgroup_cancel_attach(struct cgroup_taskset *tset)
{
}
-static void mem_cgroup_move_task(struct cgroup_taskset *tset)
+static void mem_cgroup_move_task(void)
{
}
#endif
.css_reset = mem_cgroup_css_reset,
.can_attach = mem_cgroup_can_attach,
.cancel_attach = mem_cgroup_cancel_attach,
- .attach = mem_cgroup_move_task,
+ .post_attach = mem_cgroup_move_task,
.bind = mem_cgroup_bind,
.dfl_cftypes = memory_files,
.legacy_cftypes = mem_cgroup_legacy_files,
}
}
- return get_page_unless_zero(head);
+ if (get_page_unless_zero(head)) {
+ if (head == compound_head(page))
+ return 1;
+
+ pr_info("MCE: %#lx cannot catch tail\n", page_to_pfn(page));
+ put_page(head);
+ }
+
+ return 0;
}
EXPORT_SYMBOL_GPL(get_hwpoison_page);
return pfn_to_page(pfn);
}
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+struct page *vm_normal_page_pmd(struct vm_area_struct *vma, unsigned long addr,
+ pmd_t pmd)
+{
+ unsigned long pfn = pmd_pfn(pmd);
+
+ /*
+ * There is no pmd_special() but there may be special pmds, e.g.
+ * in a direct-access (dax) mapping, so let's just replicate the
+ * !HAVE_PTE_SPECIAL case from vm_normal_page() here.
+ */
+ if (unlikely(vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP))) {
+ if (vma->vm_flags & VM_MIXEDMAP) {
+ if (!pfn_valid(pfn))
+ return NULL;
+ goto out;
+ } else {
+ unsigned long off;
+ off = (addr - vma->vm_start) >> PAGE_SHIFT;
+ if (pfn == vma->vm_pgoff + off)
+ return NULL;
+ if (!is_cow_mapping(vma->vm_flags))
+ return NULL;
+ }
+ }
+
+ if (is_zero_pfn(pfn))
+ return NULL;
+ if (unlikely(pfn > highest_memmap_pfn))
+ return NULL;
+
+ /*
+ * NOTE! We still have PageReserved() pages in the page tables.
+ * eg. VDSO mappings can cause them to exist.
+ */
+out:
+ return pfn_to_page(pfn);
+}
+#endif
+
/*
* copy one vm_area from one task to the other. Assumes the page tables
* already present in the new task to be cleared in the whole range
next = pmd_addr_end(addr, end);
if (pmd_trans_huge(*pmd) || pmd_devmap(*pmd)) {
if (next - addr != HPAGE_PMD_SIZE) {
-#ifdef CONFIG_DEBUG_VM
- if (!rwsem_is_locked(&tlb->mm->mmap_sem)) {
- pr_err("%s: mmap_sem is unlocked! addr=0x%lx end=0x%lx vma->vm_start=0x%lx vma->vm_end=0x%lx\n",
- __func__, addr, end,
- vma->vm_start,
- vma->vm_end);
- BUG();
- }
-#endif
+ VM_BUG_ON_VMA(vma_is_anonymous(vma) &&
+ !rwsem_is_locked(&tlb->mm->mmap_sem), vma);
split_huge_pmd(vma, pmd, addr);
} else if (zap_huge_pmd(tlb, vma, pmd, addr))
goto next;
dec_zone_page_state(page, NR_ISOLATED_ANON +
page_is_file_cache(page));
/* Soft-offlined page shouldn't go through lru cache list */
- if (reason == MR_MEMORY_FAILURE) {
+ if (reason == MR_MEMORY_FAILURE && rc == MIGRATEPAGE_SUCCESS) {
+ /*
+ * With this release, we free successfully migrated
+ * page and set PG_HWPoison on just freed page
+ * intentionally. Although it's rather weird, it's how
+ * HWPoison flag works at the moment.
+ */
put_page(page);
if (!test_set_page_hwpoison(page))
num_poisoned_pages_inc();
if (gdtc->dirty > gdtc->bg_thresh)
return true;
- if (wb_stat(wb, WB_RECLAIMABLE) > __wb_calc_thresh(gdtc))
+ if (wb_stat(wb, WB_RECLAIMABLE) >
+ wb_calc_thresh(gdtc->wb, gdtc->bg_thresh))
return true;
if (mdtc) {
if (mdtc->dirty > mdtc->bg_thresh)
return true;
- if (wb_stat(wb, WB_RECLAIMABLE) > __wb_calc_thresh(mdtc))
+ if (wb_stat(wb, WB_RECLAIMABLE) >
+ wb_calc_thresh(mdtc->wb, mdtc->bg_thresh))
return true;
}
setup_per_zone_inactive_ratio();
return 0;
}
-module_init(init_per_zone_wmark_min)
+core_initcall(init_per_zone_wmark_min)
/*
* min_free_kbytes_sysctl_handler - just a wrapper around proc_dointvec() so
ret = bdev_read_page(sis->bdev, swap_page_sector(page), page);
if (!ret) {
- swap_slot_free_notify(page);
+ if (trylock_page(page)) {
+ swap_slot_free_notify(page);
+ unlock_page(page);
+ }
+
count_vm_event(PSWPIN);
return 0;
}
zone = NULL;
}
+ if (is_huge_zero_page(page)) {
+ put_huge_zero_page();
+ continue;
+ }
+
page = compound_head(page);
if (!put_page_testzero(page))
continue;
sc->gfp_mask |= __GFP_HIGHMEM;
for_each_zone_zonelist_nodemask(zone, z, zonelist,
- requested_highidx, sc->nodemask) {
+ gfp_zone(sc->gfp_mask), sc->nodemask) {
enum zone_type classzone_idx;
if (!populated_zone(zone))
/* Try to sleep for a short interval */
if (prepare_kswapd_sleep(pgdat, order, remaining,
balanced_classzone_idx)) {
+ /*
+ * Compaction records what page blocks it recently failed to
+ * isolate pages from and skips them in the future scanning.
+ * When kswapd is going to sleep, it is reasonable to assume
+ * that pages and compaction may succeed so reset the cache.
+ */
+ reset_isolation_suitable(pgdat);
+
+ /*
+ * We have freed the memory, now we should compact it to make
+ * allocation of the requested order possible.
+ */
+ wakeup_kcompactd(pgdat, order, classzone_idx);
+
remaining = schedule_timeout(HZ/10);
finish_wait(&pgdat->kswapd_wait, &wait);
prepare_to_wait(&pgdat->kswapd_wait, &wait, TASK_INTERRUPTIBLE);
*/
set_pgdat_percpu_threshold(pgdat, calculate_normal_threshold);
- /*
- * Compaction records what page blocks it recently failed to
- * isolate pages from and skips them in the future scanning.
- * When kswapd is going to sleep, it is reasonable to assume
- * that pages and compaction may succeed so reset the cache.
- */
- reset_isolation_suitable(pgdat);
-
- /*
- * We have freed the memory, now we should compact it to make
- * allocation of the requested order possible.
- */
- wakeup_kcompactd(pgdat, order, classzone_idx);
-
if (!kthread_should_stop())
schedule();
static LIST_HEAD(zswap_pools);
/* protects zswap_pools list modification */
static DEFINE_SPINLOCK(zswap_pools_lock);
+/* pool counter to provide unique names to zpool */
+static atomic_t zswap_pools_count = ATOMIC_INIT(0);
/* used by param callback function */
static bool zswap_init_started;
static struct zswap_pool *zswap_pool_create(char *type, char *compressor)
{
struct zswap_pool *pool;
+ char name[38]; /* 'zswap' + 32 char (max) num + \0 */
gfp_t gfp = __GFP_NORETRY | __GFP_NOWARN | __GFP_KSWAPD_RECLAIM;
pool = kzalloc(sizeof(*pool), GFP_KERNEL);
return NULL;
}
- pool->zpool = zpool_create_pool(type, "zswap", gfp, &zswap_zpool_ops);
+ /* unique name for each pool specifically required by zsmalloc */
+ snprintf(name, 38, "zswap%x", atomic_inc_return(&zswap_pools_count));
+
+ pool->zpool = zpool_create_pool(type, name, gfp, &zswap_zpool_ops);
if (!pool->zpool) {
pr_err("%s zpool not available\n", type);
goto error;
#include "bat_v_elp.h"
#include "bat_v_ogm.h"
+#include "hard-interface.h"
#include "hash.h"
#include "originator.h"
#include "packet.h"
+static void batadv_v_iface_activate(struct batadv_hard_iface *hard_iface)
+{
+ /* B.A.T.M.A.N. V does not use any queuing mechanism, therefore it can
+ * set the interface as ACTIVE right away, without any risk of race
+ * condition
+ */
+ if (hard_iface->if_status == BATADV_IF_TO_BE_ACTIVATED)
+ hard_iface->if_status = BATADV_IF_ACTIVE;
+}
+
static int batadv_v_iface_enable(struct batadv_hard_iface *hard_iface)
{
int ret;
static struct batadv_algo_ops batadv_batman_v __read_mostly = {
.name = "BATMAN_V",
+ .bat_iface_activate = batadv_v_iface_activate,
.bat_iface_enable = batadv_v_iface_enable,
.bat_iface_disable = batadv_v_iface_disable,
.bat_iface_update_mac = batadv_v_iface_update_mac,
* be sent to
* @bat_priv: the bat priv with all the soft interface information
* @ip_dst: ipv4 to look up in the DHT
+ * @vid: VLAN identifier
*
* An originator O is selected if and only if its DHT_ID value is one of three
* closest values (from the LEFT, with wrap around if needed) then the hash
* Return: the candidate array of size BATADV_DAT_CANDIDATE_NUM.
*/
static struct batadv_dat_candidate *
-batadv_dat_select_candidates(struct batadv_priv *bat_priv, __be32 ip_dst)
+batadv_dat_select_candidates(struct batadv_priv *bat_priv, __be32 ip_dst,
+ unsigned short vid)
{
int select;
batadv_dat_addr_t last_max = BATADV_DAT_ADDR_MAX, ip_key;
return NULL;
dat.ip = ip_dst;
- dat.vid = 0;
+ dat.vid = vid;
ip_key = (batadv_dat_addr_t)batadv_hash_dat(&dat,
BATADV_DAT_ADDR_MAX);
* @bat_priv: the bat priv with all the soft interface information
* @skb: payload to send
* @ip: the DHT key
+ * @vid: VLAN identifier
* @packet_subtype: unicast4addr packet subtype to use
*
* This function copies the skb with pskb_copy() and is sent as unicast packet
*/
static bool batadv_dat_send_data(struct batadv_priv *bat_priv,
struct sk_buff *skb, __be32 ip,
- int packet_subtype)
+ unsigned short vid, int packet_subtype)
{
int i;
bool ret = false;
struct sk_buff *tmp_skb;
struct batadv_dat_candidate *cand;
- cand = batadv_dat_select_candidates(bat_priv, ip);
+ cand = batadv_dat_select_candidates(bat_priv, ip, vid);
if (!cand)
goto out;
ret = true;
} else {
/* Send the request to the DHT */
- ret = batadv_dat_send_data(bat_priv, skb, ip_dst,
+ ret = batadv_dat_send_data(bat_priv, skb, ip_dst, vid,
BATADV_P_DAT_DHT_GET);
}
out:
/* Send the ARP reply to the candidates for both the IP addresses that
* the node obtained from the ARP reply
*/
- batadv_dat_send_data(bat_priv, skb, ip_src, BATADV_P_DAT_DHT_PUT);
- batadv_dat_send_data(bat_priv, skb, ip_dst, BATADV_P_DAT_DHT_PUT);
+ batadv_dat_send_data(bat_priv, skb, ip_src, vid, BATADV_P_DAT_DHT_PUT);
+ batadv_dat_send_data(bat_priv, skb, ip_dst, vid, BATADV_P_DAT_DHT_PUT);
}
/**
batadv_update_min_mtu(hard_iface->soft_iface);
+ if (bat_priv->bat_algo_ops->bat_iface_activate)
+ bat_priv->bat_algo_ops->bat_iface_activate(hard_iface);
+
out:
if (primary_if)
batadv_hardif_put(primary_if);
struct batadv_priv *bat_priv = netdev_priv(hard_iface->soft_iface);
struct batadv_hard_iface *primary_if = NULL;
- if (hard_iface->if_status == BATADV_IF_ACTIVE)
- batadv_hardif_deactivate_interface(hard_iface);
+ batadv_hardif_deactivate_interface(hard_iface);
if (hard_iface->if_status != BATADV_IF_INACTIVE)
goto out;
{
struct hlist_node *node_tmp;
struct batadv_neigh_node *neigh_node;
- struct batadv_hardif_neigh_node *hardif_neigh;
struct batadv_neigh_ifinfo *neigh_ifinfo;
struct batadv_algo_ops *bao;
batadv_neigh_ifinfo_put(neigh_ifinfo);
}
- hardif_neigh = batadv_hardif_neigh_get(neigh_node->if_incoming,
- neigh_node->addr);
- if (hardif_neigh) {
- /* batadv_hardif_neigh_get() increases refcount too */
- batadv_hardif_neigh_put(hardif_neigh);
- batadv_hardif_neigh_put(hardif_neigh);
- }
+ batadv_hardif_neigh_put(neigh_node->hardif_neigh);
if (bao->bat_neigh_free)
bao->bat_neigh_free(neigh_node);
ether_addr_copy(neigh_node->addr, neigh_addr);
neigh_node->if_incoming = hard_iface;
neigh_node->orig_node = orig_node;
+ neigh_node->last_seen = jiffies;
+
+ /* increment unique neighbor refcount */
+ kref_get(&hardif_neigh->refcount);
+ neigh_node->hardif_neigh = hardif_neigh;
/* extra reference for return */
kref_init(&neigh_node->refcount);
hlist_add_head_rcu(&neigh_node->list, &orig_node->neigh_list);
spin_unlock_bh(&orig_node->neigh_list_lock);
- /* increment unique neighbor refcount */
- kref_get(&hardif_neigh->refcount);
-
batadv_dbg(BATADV_DBG_BATMAN, orig_node->bat_priv,
"Creating new neighbor %pM for orig_node %pM on interface %s\n",
neigh_addr, orig_node->orig, hard_iface->net_dev->name);
neigh_node = NULL;
spin_lock_bh(&orig_node->neigh_list_lock);
+ /* curr_router used earlier may not be the current orig_ifinfo->router
+ * anymore because it was dereferenced outside of the neigh_list_lock
+ * protected region. After the new best neighbor has replace the current
+ * best neighbor the reference counter needs to decrease. Consequently,
+ * the code needs to ensure the curr_router variable contains a pointer
+ * to the replaced best neighbor.
+ */
+ curr_router = rcu_dereference_protected(orig_ifinfo->router, true);
+
rcu_assign_pointer(orig_ifinfo->router, neigh_node);
spin_unlock_bh(&orig_node->neigh_list_lock);
batadv_orig_ifinfo_put(orig_ifinfo);
if (pending) {
hlist_del(&forw_packet->list);
+ if (!forw_packet->own)
+ atomic_inc(&bat_priv->bcast_queue_left);
+
batadv_forw_packet_free(forw_packet);
}
}
if (pending) {
hlist_del(&forw_packet->list);
+ if (!forw_packet->own)
+ atomic_inc(&bat_priv->batman_queue_left);
+
batadv_forw_packet_free(forw_packet);
}
}
*/
nf_reset(skb);
+ if (unlikely(!pskb_may_pull(skb, ETH_HLEN)))
+ goto dropped;
+
vid = batadv_get_vid(skb, 0);
ethhdr = eth_hdr(skb);
switch (ntohs(ethhdr->h_proto)) {
case ETH_P_8021Q:
+ if (!pskb_may_pull(skb, VLAN_ETH_HLEN))
+ goto dropped;
+
vhdr = (struct vlan_ethhdr *)skb->data;
if (vhdr->h_vlan_encapsulated_proto != ethertype)
}
/* skb->dev & skb->pkt_type are set here */
- if (unlikely(!pskb_may_pull(skb, ETH_HLEN)))
- goto dropped;
skb->protocol = eth_type_trans(skb, soft_iface);
/* should not be necessary anymore as we use skb_pull_rcsum()
tt_local_entry = container_of(ref, struct batadv_tt_local_entry,
common.refcount);
+ batadv_softif_vlan_put(tt_local_entry->vlan);
+
kfree_rcu(tt_local_entry, common.rcu);
}
kref_get(&tt_local->common.refcount);
tt_local->last_seen = jiffies;
tt_local->common.added_at = tt_local->last_seen;
+ tt_local->vlan = vlan;
/* the batman interface mac and multicast addresses should never be
* purged
struct batadv_tt_common_entry *tt_common_entry;
struct batadv_tt_local_entry *tt_local;
struct batadv_hard_iface *primary_if;
- struct batadv_softif_vlan *vlan;
struct hlist_head *head;
unsigned short vid;
u32 i;
last_seen_msecs = last_seen_msecs % 1000;
no_purge = tt_common_entry->flags & np_flag;
-
- vlan = batadv_softif_vlan_get(bat_priv, vid);
- if (!vlan) {
- seq_printf(seq, "Cannot retrieve VLAN %d\n",
- BATADV_PRINT_VID(vid));
- continue;
- }
-
seq_printf(seq,
" * %pM %4i [%c%c%c%c%c%c] %3u.%03u (%#.8x)\n",
tt_common_entry->addr,
BATADV_TT_CLIENT_ISOLA) ? 'I' : '.'),
no_purge ? 0 : last_seen_secs,
no_purge ? 0 : last_seen_msecs,
- vlan->tt.crc);
-
- batadv_softif_vlan_put(vlan);
+ tt_local->vlan->tt.crc);
}
rcu_read_unlock();
}
{
struct batadv_tt_local_entry *tt_local_entry;
u16 flags, curr_flags = BATADV_NO_FLAGS;
- struct batadv_softif_vlan *vlan;
void *tt_entry_exists;
tt_local_entry = batadv_tt_local_hash_find(bat_priv, addr, vid);
/* extra call to free the local tt entry */
batadv_tt_local_entry_put(tt_local_entry);
- /* decrease the reference held for this vlan */
- vlan = batadv_softif_vlan_get(bat_priv, vid);
- if (!vlan)
- goto out;
-
- batadv_softif_vlan_put(vlan);
- batadv_softif_vlan_put(vlan);
-
out:
if (tt_local_entry)
batadv_tt_local_entry_put(tt_local_entry);
spinlock_t *list_lock; /* protects write access to the hash lists */
struct batadv_tt_common_entry *tt_common_entry;
struct batadv_tt_local_entry *tt_local;
- struct batadv_softif_vlan *vlan;
struct hlist_node *node_tmp;
struct hlist_head *head;
u32 i;
struct batadv_tt_local_entry,
common);
- /* decrease the reference held for this vlan */
- vlan = batadv_softif_vlan_get(bat_priv,
- tt_common_entry->vid);
- if (vlan) {
- batadv_softif_vlan_put(vlan);
- batadv_softif_vlan_put(vlan);
- }
-
batadv_tt_local_entry_put(tt_local);
}
spin_unlock_bh(list_lock);
struct batadv_hashtable *hash = bat_priv->tt.local_hash;
struct batadv_tt_common_entry *tt_common;
struct batadv_tt_local_entry *tt_local;
- struct batadv_softif_vlan *vlan;
struct hlist_node *node_tmp;
struct hlist_head *head;
spinlock_t *list_lock; /* protects write access to the hash lists */
struct batadv_tt_local_entry,
common);
- /* decrease the reference held for this vlan */
- vlan = batadv_softif_vlan_get(bat_priv, tt_common->vid);
- if (vlan) {
- batadv_softif_vlan_put(vlan);
- batadv_softif_vlan_put(vlan);
- }
-
batadv_tt_local_entry_put(tt_local);
}
spin_unlock_bh(list_lock);
* @ifinfo_lock: lock protecting private ifinfo members and list
* @if_incoming: pointer to incoming hard-interface
* @last_seen: when last packet via this neighbor was received
+ * @hardif_neigh: hardif_neigh of this neighbor
* @refcount: number of contexts the object is used
* @rcu: struct used for freeing in an RCU-safe manner
*/
spinlock_t ifinfo_lock; /* protects ifinfo_list and its members */
struct batadv_hard_iface *if_incoming;
unsigned long last_seen;
+ struct batadv_hardif_neigh_node *hardif_neigh;
struct kref refcount;
struct rcu_head rcu;
};
* struct batadv_tt_local_entry - translation table local entry data
* @common: general translation table data
* @last_seen: timestamp used for purging stale tt local entries
+ * @vlan: soft-interface vlan of the entry
*/
struct batadv_tt_local_entry {
struct batadv_tt_common_entry common;
unsigned long last_seen;
+ struct batadv_softif_vlan *vlan;
};
/**
* struct batadv_algo_ops - mesh algorithm callbacks
* @list: list node for the batadv_algo_list
* @name: name of the algorithm
+ * @bat_iface_activate: start routing mechanisms when hard-interface is brought
+ * up
* @bat_iface_enable: init routing info when hard-interface is enabled
* @bat_iface_disable: de-init routing info when hard-interface is disabled
* @bat_iface_update_mac: (re-)init mac addresses of the protocol information
struct batadv_algo_ops {
struct hlist_node list;
char *name;
+ void (*bat_iface_activate)(struct batadv_hard_iface *hard_iface);
int (*bat_iface_enable)(struct batadv_hard_iface *hard_iface);
void (*bat_iface_disable)(struct batadv_hard_iface *hard_iface);
void (*bat_iface_update_mac)(struct batadv_hard_iface *hard_iface);
e->flags |= MDB_FLAGS_OFFLOAD;
}
+static void __mdb_entry_to_br_ip(struct br_mdb_entry *entry, struct br_ip *ip)
+{
+ memset(ip, 0, sizeof(struct br_ip));
+ ip->vid = entry->vid;
+ ip->proto = entry->addr.proto;
+ if (ip->proto == htons(ETH_P_IP))
+ ip->u.ip4 = entry->addr.u.ip4;
+#if IS_ENABLED(CONFIG_IPV6)
+ else
+ ip->u.ip6 = entry->addr.u.ip6;
+#endif
+}
+
static int br_mdb_fill_info(struct sk_buff *skb, struct netlink_callback *cb,
struct net_device *dev)
{
+ nla_total_size(sizeof(struct br_mdb_entry));
}
-static void __br_mdb_notify(struct net_device *dev, struct br_mdb_entry *entry,
- int type, struct net_bridge_port_group *pg)
+struct br_mdb_complete_info {
+ struct net_bridge_port *port;
+ struct br_ip ip;
+};
+
+static void br_mdb_complete(struct net_device *dev, int err, void *priv)
{
+ struct br_mdb_complete_info *data = priv;
+ struct net_bridge_port_group __rcu **pp;
+ struct net_bridge_port_group *p;
+ struct net_bridge_mdb_htable *mdb;
+ struct net_bridge_mdb_entry *mp;
+ struct net_bridge_port *port = data->port;
+ struct net_bridge *br = port->br;
+
+ if (err)
+ goto err;
+
+ spin_lock_bh(&br->multicast_lock);
+ mdb = mlock_dereference(br->mdb, br);
+ mp = br_mdb_ip_get(mdb, &data->ip);
+ if (!mp)
+ goto out;
+ for (pp = &mp->ports; (p = mlock_dereference(*pp, br)) != NULL;
+ pp = &p->next) {
+ if (p->port != port)
+ continue;
+ p->flags |= MDB_PG_FLAGS_OFFLOAD;
+ }
+out:
+ spin_unlock_bh(&br->multicast_lock);
+err:
+ kfree(priv);
+}
+
+static void __br_mdb_notify(struct net_device *dev, struct net_bridge_port *p,
+ struct br_mdb_entry *entry, int type)
+{
+ struct br_mdb_complete_info *complete_info;
struct switchdev_obj_port_mdb mdb = {
.obj = {
.id = SWITCHDEV_OBJ_ID_PORT_MDB,
mdb.obj.orig_dev = port_dev;
if (port_dev && type == RTM_NEWMDB) {
- err = switchdev_port_obj_add(port_dev, &mdb.obj);
- if (!err && pg)
- pg->flags |= MDB_PG_FLAGS_OFFLOAD;
+ complete_info = kmalloc(sizeof(*complete_info), GFP_ATOMIC);
+ if (complete_info) {
+ complete_info->port = p;
+ __mdb_entry_to_br_ip(entry, &complete_info->ip);
+ mdb.obj.complete_priv = complete_info;
+ mdb.obj.complete = br_mdb_complete;
+ switchdev_port_obj_add(port_dev, &mdb.obj);
+ }
} else if (port_dev && type == RTM_DELMDB) {
switchdev_port_obj_del(port_dev, &mdb.obj);
}
rtnl_set_sk_err(net, RTNLGRP_MDB, err);
}
-void br_mdb_notify(struct net_device *dev, struct net_bridge_port_group *pg,
- int type)
+void br_mdb_notify(struct net_device *dev, struct net_bridge_port *port,
+ struct br_ip *group, int type, u8 flags)
{
struct br_mdb_entry entry;
memset(&entry, 0, sizeof(entry));
- entry.ifindex = pg->port->dev->ifindex;
- entry.addr.proto = pg->addr.proto;
- entry.addr.u.ip4 = pg->addr.u.ip4;
+ entry.ifindex = port->dev->ifindex;
+ entry.addr.proto = group->proto;
+ entry.addr.u.ip4 = group->u.ip4;
#if IS_ENABLED(CONFIG_IPV6)
- entry.addr.u.ip6 = pg->addr.u.ip6;
+ entry.addr.u.ip6 = group->u.ip6;
#endif
- entry.vid = pg->addr.vid;
- __mdb_entry_fill_flags(&entry, pg->flags);
- __br_mdb_notify(dev, &entry, type, pg);
+ entry.vid = group->vid;
+ __mdb_entry_fill_flags(&entry, flags);
+ __br_mdb_notify(dev, port, &entry, type);
}
static int nlmsg_populate_rtr_fill(struct sk_buff *skb,
}
static int br_mdb_add_group(struct net_bridge *br, struct net_bridge_port *port,
- struct br_ip *group, unsigned char state,
- struct net_bridge_port_group **pg)
+ struct br_ip *group, unsigned char state)
{
struct net_bridge_mdb_entry *mp;
struct net_bridge_port_group *p;
if (unlikely(!p))
return -ENOMEM;
rcu_assign_pointer(*pp, p);
- *pg = p;
if (state == MDB_TEMPORARY)
mod_timer(&p->timer, now + br->multicast_membership_interval);
}
static int __br_mdb_add(struct net *net, struct net_bridge *br,
- struct br_mdb_entry *entry,
- struct net_bridge_port_group **pg)
+ struct br_mdb_entry *entry)
{
struct br_ip ip;
struct net_device *dev;
if (!p || p->br != br || p->state == BR_STATE_DISABLED)
return -EINVAL;
- memset(&ip, 0, sizeof(ip));
- ip.vid = entry->vid;
- ip.proto = entry->addr.proto;
- if (ip.proto == htons(ETH_P_IP))
- ip.u.ip4 = entry->addr.u.ip4;
-#if IS_ENABLED(CONFIG_IPV6)
- else
- ip.u.ip6 = entry->addr.u.ip6;
-#endif
+ __mdb_entry_to_br_ip(entry, &ip);
spin_lock_bh(&br->multicast_lock);
- ret = br_mdb_add_group(br, p, &ip, entry->state, pg);
+ ret = br_mdb_add_group(br, p, &ip, entry->state);
spin_unlock_bh(&br->multicast_lock);
return ret;
}
static int br_mdb_add(struct sk_buff *skb, struct nlmsghdr *nlh)
{
struct net *net = sock_net(skb->sk);
- struct net_bridge_port_group *pg;
struct net_bridge_vlan_group *vg;
struct net_device *dev, *pdev;
struct br_mdb_entry *entry;
if (br_vlan_enabled(br) && vg && entry->vid == 0) {
list_for_each_entry(v, &vg->vlan_list, vlist) {
entry->vid = v->vid;
- err = __br_mdb_add(net, br, entry, &pg);
+ err = __br_mdb_add(net, br, entry);
if (err)
break;
- __br_mdb_notify(dev, entry, RTM_NEWMDB, pg);
+ __br_mdb_notify(dev, p, entry, RTM_NEWMDB);
}
} else {
- err = __br_mdb_add(net, br, entry, &pg);
+ err = __br_mdb_add(net, br, entry);
if (!err)
- __br_mdb_notify(dev, entry, RTM_NEWMDB, pg);
+ __br_mdb_notify(dev, p, entry, RTM_NEWMDB);
}
return err;
if (!netif_running(br->dev) || br->multicast_disabled)
return -EINVAL;
- memset(&ip, 0, sizeof(ip));
- ip.vid = entry->vid;
- ip.proto = entry->addr.proto;
- if (ip.proto == htons(ETH_P_IP))
- ip.u.ip4 = entry->addr.u.ip4;
-#if IS_ENABLED(CONFIG_IPV6)
- else
- ip.u.ip6 = entry->addr.u.ip6;
-#endif
+ __mdb_entry_to_br_ip(entry, &ip);
spin_lock_bh(&br->multicast_lock);
mdb = mlock_dereference(br->mdb, br);
entry->vid = v->vid;
err = __br_mdb_del(br, entry);
if (!err)
- __br_mdb_notify(dev, entry, RTM_DELMDB, NULL);
+ __br_mdb_notify(dev, p, entry, RTM_DELMDB);
}
} else {
err = __br_mdb_del(br, entry);
if (!err)
- __br_mdb_notify(dev, entry, RTM_DELMDB, NULL);
+ __br_mdb_notify(dev, p, entry, RTM_DELMDB);
}
return err;
rcu_assign_pointer(*pp, p->next);
hlist_del_init(&p->mglist);
del_timer(&p->timer);
- br_mdb_notify(br->dev, p, RTM_DELMDB);
+ br_mdb_notify(br->dev, p->port, &pg->addr, RTM_DELMDB,
+ p->flags);
call_rcu_bh(&p->rcu, br_multicast_free_pg);
if (!mp->ports && !mp->mglist &&
if (unlikely(!p))
goto err;
rcu_assign_pointer(*pp, p);
- br_mdb_notify(br->dev, p, RTM_NEWMDB);
+ br_mdb_notify(br->dev, port, group, RTM_NEWMDB, 0);
found:
mod_timer(&p->timer, now + br->multicast_membership_interval);
hlist_del_init(&p->mglist);
del_timer(&p->timer);
call_rcu_bh(&p->rcu, br_multicast_free_pg);
- br_mdb_notify(br->dev, p, RTM_DELMDB);
+ br_mdb_notify(br->dev, port, group, RTM_DELMDB,
+ p->flags);
if (!mp->ports && !mp->mglist &&
netif_running(br->dev))
unsigned char flags);
void br_mdb_init(void);
void br_mdb_uninit(void);
-void br_mdb_notify(struct net_device *dev, struct net_bridge_port_group *pg,
- int type);
+void br_mdb_notify(struct net_device *dev, struct net_bridge_port *port,
+ struct br_ip *group, int type, u8 flags);
void br_rtr_notify(struct net_device *dev, struct net_bridge_port *port,
int type);
}
EXPORT_SYMBOL(ceph_auth_create_authorizer);
-void ceph_auth_destroy_authorizer(struct ceph_auth_client *ac,
- struct ceph_authorizer *a)
+void ceph_auth_destroy_authorizer(struct ceph_authorizer *a)
{
- mutex_lock(&ac->mutex);
- if (ac->ops && ac->ops->destroy_authorizer)
- ac->ops->destroy_authorizer(ac, a);
- mutex_unlock(&ac->mutex);
+ a->destroy(a);
}
EXPORT_SYMBOL(ceph_auth_destroy_authorizer);
struct ceph_auth_none_info *xi = ac->private;
xi->starting = true;
- xi->built_authorizer = false;
}
static void destroy(struct ceph_auth_client *ac)
return xi->starting;
}
+static int ceph_auth_none_build_authorizer(struct ceph_auth_client *ac,
+ struct ceph_none_authorizer *au)
+{
+ void *p = au->buf;
+ void *const end = p + sizeof(au->buf);
+ int ret;
+
+ ceph_encode_8_safe(&p, end, 1, e_range);
+ ret = ceph_entity_name_encode(ac->name, &p, end);
+ if (ret < 0)
+ return ret;
+
+ ceph_encode_64_safe(&p, end, ac->global_id, e_range);
+ au->buf_len = p - (void *)au->buf;
+ dout("%s built authorizer len %d\n", __func__, au->buf_len);
+ return 0;
+
+e_range:
+ return -ERANGE;
+}
+
static int build_request(struct ceph_auth_client *ac, void *buf, void *end)
{
return 0;
return result;
}
+static void ceph_auth_none_destroy_authorizer(struct ceph_authorizer *a)
+{
+ kfree(a);
+}
+
/*
- * build an 'authorizer' with our entity_name and global_id. we can
- * reuse a single static copy since it is identical for all services
- * we connect to.
+ * build an 'authorizer' with our entity_name and global_id. it is
+ * identical for all services we connect to.
*/
static int ceph_auth_none_create_authorizer(
struct ceph_auth_client *ac, int peer_type,
struct ceph_auth_handshake *auth)
{
- struct ceph_auth_none_info *ai = ac->private;
- struct ceph_none_authorizer *au = &ai->au;
- void *p, *end;
+ struct ceph_none_authorizer *au;
int ret;
- if (!ai->built_authorizer) {
- p = au->buf;
- end = p + sizeof(au->buf);
- ceph_encode_8(&p, 1);
- ret = ceph_entity_name_encode(ac->name, &p, end - 8);
- if (ret < 0)
- goto bad;
- ceph_decode_need(&p, end, sizeof(u64), bad2);
- ceph_encode_64(&p, ac->global_id);
- au->buf_len = p - (void *)au->buf;
- ai->built_authorizer = true;
- dout("built authorizer len %d\n", au->buf_len);
+ au = kmalloc(sizeof(*au), GFP_NOFS);
+ if (!au)
+ return -ENOMEM;
+
+ au->base.destroy = ceph_auth_none_destroy_authorizer;
+
+ ret = ceph_auth_none_build_authorizer(ac, au);
+ if (ret) {
+ kfree(au);
+ return ret;
}
auth->authorizer = (struct ceph_authorizer *) au;
auth->authorizer_reply_buf_len = sizeof (au->reply_buf);
return 0;
-
-bad2:
- ret = -ERANGE;
-bad:
- return ret;
-}
-
-static void ceph_auth_none_destroy_authorizer(struct ceph_auth_client *ac,
- struct ceph_authorizer *a)
-{
- /* nothing to do */
}
static const struct ceph_auth_client_ops ceph_auth_none_ops = {
.build_request = build_request,
.handle_reply = handle_reply,
.create_authorizer = ceph_auth_none_create_authorizer,
- .destroy_authorizer = ceph_auth_none_destroy_authorizer,
};
int ceph_auth_none_init(struct ceph_auth_client *ac)
return -ENOMEM;
xi->starting = true;
- xi->built_authorizer = false;
ac->protocol = CEPH_AUTH_NONE;
ac->private = xi;
*/
struct ceph_none_authorizer {
+ struct ceph_authorizer base;
char buf[128];
int buf_len;
char reply_buf[0];
struct ceph_auth_none_info {
bool starting;
- bool built_authorizer;
- struct ceph_none_authorizer au; /* we only need one; it's static */
};
int ceph_auth_none_init(struct ceph_auth_client *ac);
return -EAGAIN;
}
+static void ceph_x_destroy_authorizer(struct ceph_authorizer *a)
+{
+ struct ceph_x_authorizer *au = (void *)a;
+
+ ceph_x_authorizer_cleanup(au);
+ kfree(au);
+}
+
static int ceph_x_create_authorizer(
struct ceph_auth_client *ac, int peer_type,
struct ceph_auth_handshake *auth)
if (!au)
return -ENOMEM;
+ au->base.destroy = ceph_x_destroy_authorizer;
+
ret = ceph_x_build_authorizer(ac, th, au);
if (ret) {
kfree(au);
return ret;
}
-static void ceph_x_destroy_authorizer(struct ceph_auth_client *ac,
- struct ceph_authorizer *a)
-{
- struct ceph_x_authorizer *au = (void *)a;
-
- ceph_x_authorizer_cleanup(au);
- kfree(au);
-}
-
-
static void ceph_x_reset(struct ceph_auth_client *ac)
{
struct ceph_x_info *xi = ac->private;
.create_authorizer = ceph_x_create_authorizer,
.update_authorizer = ceph_x_update_authorizer,
.verify_authorizer_reply = ceph_x_verify_authorizer_reply,
- .destroy_authorizer = ceph_x_destroy_authorizer,
.invalidate_authorizer = ceph_x_invalidate_authorizer,
.reset = ceph_x_reset,
.destroy = ceph_x_destroy,
struct ceph_x_authorizer {
+ struct ceph_authorizer base;
struct ceph_crypto_key session_key;
struct ceph_buffer *buf;
unsigned int service;
dout("put_osd %p %d -> %d\n", osd, atomic_read(&osd->o_ref),
atomic_read(&osd->o_ref) - 1);
if (atomic_dec_and_test(&osd->o_ref)) {
- struct ceph_auth_client *ac = osd->o_osdc->client->monc.auth;
-
if (osd->o_auth.authorizer)
- ceph_auth_destroy_authorizer(ac, osd->o_auth.authorizer);
+ ceph_auth_destroy_authorizer(osd->o_auth.authorizer);
kfree(osd);
}
}
struct ceph_auth_handshake *auth = &o->o_auth;
if (force_new && auth->authorizer) {
- ceph_auth_destroy_authorizer(ac, auth->authorizer);
+ ceph_auth_destroy_authorizer(auth->authorizer);
auth->authorizer = NULL;
}
if (!auth->authorizer) {
if (skb->ip_summed != CHECKSUM_NONE &&
!can_checksum_protocol(features, type)) {
- features &= ~NETIF_F_CSUM_MASK;
+ features &= ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK);
} else if (illegal_highdma(skb->dev, skb)) {
features &= ~NETIF_F_SG;
}
if (ifa->ifa_flags & IFA_F_SECONDARY) {
prim = inet_ifa_byprefix(in_dev, any, ifa->ifa_mask);
if (!prim) {
- pr_warn("%s: bug: prim == NULL\n", __func__);
+ /* if the device has been deleted, we don't perform
+ * address promotion
+ */
+ if (!in_dev->dead)
+ pr_warn("%s: bug: prim == NULL\n", __func__);
return;
}
if (iprim && iprim != prim) {
const struct sock *sk2,
bool match_wildcard))
{
+ struct inet_bind_bucket *tb = inet_csk(sk)->icsk_bind_hash;
struct sock *sk2;
struct hlist_nulls_node *node;
kuid_t uid = sock_i_uid(sk);
sk2->sk_family == sk->sk_family &&
ipv6_only_sock(sk2) == ipv6_only_sock(sk) &&
sk2->sk_bound_dev_if == sk->sk_bound_dev_if &&
+ inet_csk(sk2)->icsk_bind_hash == tb &&
sk2->sk_reuseport && uid_eq(uid, sock_i_uid(sk2)) &&
saddr_same(sk, sk2, false))
return reuseport_add_sock(sk, sk2);
return flags;
}
+/* Fills in tpi and returns header length to be pulled. */
static int parse_gre_header(struct sk_buff *skb, struct tnl_ptk_info *tpi,
bool *csum_err)
{
return -EINVAL;
}
}
- return iptunnel_pull_header(skb, hdr_len, tpi->proto, false);
+ return hdr_len;
}
static void ipgre_err(struct sk_buff *skb, u32 info,
struct tnl_ptk_info tpi;
bool csum_err = false;
- if (parse_gre_header(skb, &tpi, &csum_err)) {
+ if (parse_gre_header(skb, &tpi, &csum_err) < 0) {
if (!csum_err) /* ignore csum errors. */
return;
}
{
struct tnl_ptk_info tpi;
bool csum_err = false;
+ int hdr_len;
#ifdef CONFIG_NET_IPGRE_BROADCAST
if (ipv4_is_multicast(ip_hdr(skb)->daddr)) {
}
#endif
- if (parse_gre_header(skb, &tpi, &csum_err) < 0)
+ hdr_len = parse_gre_header(skb, &tpi, &csum_err);
+ if (hdr_len < 0)
+ goto drop;
+ if (iptunnel_pull_header(skb, hdr_len, tpi.proto, false) < 0)
goto drop;
if (ipgre_rcv(skb, &tpi) == PACKET_RCVD)
return ip_route_output_key(net, fl);
}
-static void gre_fb_xmit(struct sk_buff *skb, struct net_device *dev)
+static void gre_fb_xmit(struct sk_buff *skb, struct net_device *dev,
+ __be16 proto)
{
struct ip_tunnel_info *tun_info;
const struct ip_tunnel_key *key;
}
flags = tun_info->key.tun_flags & (TUNNEL_CSUM | TUNNEL_KEY);
- build_header(skb, tunnel_hlen, flags, htons(ETH_P_TEB),
+ build_header(skb, tunnel_hlen, flags, proto,
tunnel_id_to_key(tun_info->key.tun_id), 0);
df = key->tun_flags & TUNNEL_DONT_FRAGMENT ? htons(IP_DF) : 0;
const struct iphdr *tnl_params;
if (tunnel->collect_md) {
- gre_fb_xmit(skb, dev);
+ gre_fb_xmit(skb, dev, skb->protocol);
return NETDEV_TX_OK;
}
struct ip_tunnel *tunnel = netdev_priv(dev);
if (tunnel->collect_md) {
- gre_fb_xmit(skb, dev);
+ gre_fb_xmit(skb, dev, htons(ETH_P_TEB));
return NETDEV_TX_OK;
}
netif_keep_dst(dev);
dev->addr_len = 4;
- if (iph->daddr) {
+ if (iph->daddr && !tunnel->collect_md) {
#ifdef CONFIG_NET_IPGRE_BROADCAST
if (ipv4_is_multicast(iph->daddr)) {
if (!iph->saddr)
dev->header_ops = &ipgre_header_ops;
}
#endif
- } else
+ } else if (!tunnel->collect_md) {
dev->header_ops = &ipgre_header_ops;
+ }
return ip_tunnel_init(dev);
}
if (flags & (GRE_VERSION|GRE_ROUTING))
return -EINVAL;
+ if (data[IFLA_GRE_COLLECT_METADATA] &&
+ data[IFLA_GRE_ENCAP_TYPE] &&
+ nla_get_u16(data[IFLA_GRE_ENCAP_TYPE]) != TUNNEL_ENCAP_NONE)
+ return -EINVAL;
+
return 0;
}
if (!IS_ERR(rt)) {
tdev = rt->dst.dev;
- dst_cache_set_ip4(&tunnel->dst_cache, &rt->dst,
- fl4.saddr);
ip_rt_put(rt);
}
if (dev->type != ARPHRD_ETHER)
dev->flags |= IFF_POINTOPOINT;
+
+ dst_cache_reset(&tunnel->dst_cache);
}
if (!tdev && tunnel->parms.link)
}
#endif
-#if IS_ENABLED(CONFIG_NET_L3_MASTER_DEV)
-/* If the host route is cached on the addr struct make sure it is associated
- * with the proper table. e.g., enslavement can change and if so the cached
- * host route needs to move to the new table.
- */
-static void l3mdev_check_host_rt(struct inet6_dev *idev,
- struct inet6_ifaddr *ifp)
-{
- if (ifp->rt) {
- u32 tb_id = l3mdev_fib_table(idev->dev) ? : RT6_TABLE_LOCAL;
-
- if (tb_id != ifp->rt->rt6i_table->tb6_id) {
- ip6_del_rt(ifp->rt);
- ifp->rt = NULL;
- }
- }
-}
-#else
-static void l3mdev_check_host_rt(struct inet6_dev *idev,
- struct inet6_ifaddr *ifp)
-{
-}
-#endif
-
static int fixup_permanent_addr(struct inet6_dev *idev,
struct inet6_ifaddr *ifp)
{
- l3mdev_check_host_rt(idev, ifp);
-
if (!ifp->rt) {
struct rt6_info *rt;
break;
if (event == NETDEV_UP) {
+ /* restore routes for permanent addresses */
+ addrconf_permanent_addr(dev);
+
if (!addrconf_qdisc_ok(dev)) {
/* device is not ready yet. */
pr_info("ADDRCONF(NETDEV_UP): %s: link is not ready\n",
run_pending = 1;
}
- /* restore routes for permanent addresses */
- addrconf_permanent_addr(dev);
-
switch (dev->type) {
#if IS_ENABLED(CONFIG_IPV6_SIT)
case ARPHRD_SIT:
INIT_LIST_HEAD(&del_list);
list_for_each_entry_safe(ifa, tmp, &idev->addr_list, if_list) {
+ struct rt6_info *rt = NULL;
+
addrconf_del_dad_work(ifa);
write_unlock_bh(&idev->lock);
ifa->state = 0;
if (!(ifa->flags & IFA_F_NODAD))
ifa->flags |= IFA_F_TENTATIVE;
+
+ rt = ifa->rt;
+ ifa->rt = NULL;
} else {
state = ifa->state;
ifa->state = INET6_IFADDR_STATE_DEAD;
spin_unlock_bh(&ifa->lock);
+ if (rt)
+ ip6_del_rt(rt);
+
if (state != INET6_IFADDR_STATE_DEAD) {
__ipv6_ifa_notify(RTM_DELADDR, ifa);
inet6addr_notifier_call_chain(NETDEV_DOWN, ifa);
if (rt)
ip6_del_rt(rt);
}
- dst_hold(&ifp->rt->dst);
-
- ip6_del_rt(ifp->rt);
-
+ if (ifp->rt) {
+ dst_hold(&ifp->rt->dst);
+ ip6_del_rt(ifp->rt);
+ }
rt_genid_bump_ipv6(net);
break;
}
static int ila_encap_nlsize(struct lwtunnel_state *lwtstate)
{
- /* No encapsulation overhead */
- return 0;
+ return nla_total_size(sizeof(u64)); /* ILA_ATTR_LOCATOR */
}
static int ila_encap_cmp(struct lwtunnel_state *a, struct lwtunnel_state *b)
memcpy(&udp_conf.peer_ip6, cfg->peer_ip6,
sizeof(udp_conf.peer_ip6));
udp_conf.use_udp6_tx_checksums =
- cfg->udp6_zero_tx_checksums;
+ ! cfg->udp6_zero_tx_checksums;
udp_conf.use_udp6_rx_checksums =
- cfg->udp6_zero_rx_checksums;
+ ! cfg->udp6_zero_rx_checksums;
} else
#endif
{
ret = dev_alloc_name(ndev, ndev->name);
if (ret < 0) {
- free_netdev(ndev);
+ ieee80211_if_free(ndev);
return ret;
}
ret = register_netdevice(ndev);
if (ret) {
- free_netdev(ndev);
+ ieee80211_if_free(ndev);
return ret;
}
}
/*
* This is the only path that sets tc->t_sock. Send and receive trust that
- * it is set. The RDS_CONN_CONNECTED bit protects those paths from being
+ * it is set. The RDS_CONN_UP bit protects those paths from being
* called while it isn't set.
*/
void rds_tcp_set_callbacks(struct socket *sock, struct rds_connection *conn)
if (!tc)
return -ENOMEM;
+ mutex_init(&tc->t_conn_lock);
tc->t_sock = NULL;
tc->t_tinc = NULL;
tc->t_tinc_hdr_rem = sizeof(struct rds_header);
struct list_head t_tcp_node;
struct rds_connection *conn;
+ /* t_conn_lock synchronizes the connection establishment between
+ * rds_tcp_accept_one and rds_tcp_conn_connect
+ */
+ struct mutex t_conn_lock;
struct socket *t_sock;
void *t_orig_write_space;
void *t_orig_data_ready;
struct socket *sock = NULL;
struct sockaddr_in src, dest;
int ret;
+ struct rds_tcp_connection *tc = conn->c_transport_data;
+
+ mutex_lock(&tc->t_conn_lock);
+ if (rds_conn_up(conn)) {
+ mutex_unlock(&tc->t_conn_lock);
+ return 0;
+ }
ret = sock_create_kern(rds_conn_net(conn), PF_INET,
SOCK_STREAM, IPPROTO_TCP, &sock);
if (ret < 0)
}
out:
+ mutex_unlock(&tc->t_conn_lock);
if (sock)
sock_release(sock);
return ret;
struct rds_connection *conn;
int ret;
struct inet_sock *inet;
- struct rds_tcp_connection *rs_tcp;
+ struct rds_tcp_connection *rs_tcp = NULL;
+ int conn_state;
+ struct sock *nsk;
ret = sock_create_kern(sock_net(sock->sk), sock->sk->sk_family,
sock->sk->sk_type, sock->sk->sk_protocol,
* rds_tcp_state_change() will do that cleanup
*/
rs_tcp = (struct rds_tcp_connection *)conn->c_transport_data;
- if (rs_tcp->t_sock &&
- ntohl(inet->inet_saddr) < ntohl(inet->inet_daddr)) {
- struct sock *nsk = new_sock->sk;
-
- nsk->sk_user_data = NULL;
- nsk->sk_prot->disconnect(nsk, 0);
- tcp_done(nsk);
- new_sock = NULL;
- ret = 0;
- goto out;
- } else if (rs_tcp->t_sock) {
- rds_tcp_restore_callbacks(rs_tcp->t_sock, rs_tcp);
- conn->c_outgoing = 0;
- }
-
rds_conn_transition(conn, RDS_CONN_DOWN, RDS_CONN_CONNECTING);
+ mutex_lock(&rs_tcp->t_conn_lock);
+ conn_state = rds_conn_state(conn);
+ if (conn_state != RDS_CONN_CONNECTING && conn_state != RDS_CONN_UP)
+ goto rst_nsk;
+ if (rs_tcp->t_sock) {
+ /* Need to resolve a duelling SYN between peers.
+ * We have an outstanding SYN to this peer, which may
+ * potentially have transitioned to the RDS_CONN_UP state,
+ * so we must quiesce any send threads before resetting
+ * c_transport_data.
+ */
+ wait_event(conn->c_waitq,
+ !test_bit(RDS_IN_XMIT, &conn->c_flags));
+ if (ntohl(inet->inet_saddr) < ntohl(inet->inet_daddr)) {
+ goto rst_nsk;
+ } else if (rs_tcp->t_sock) {
+ rds_tcp_restore_callbacks(rs_tcp->t_sock, rs_tcp);
+ conn->c_outgoing = 0;
+ }
+ }
rds_tcp_set_callbacks(new_sock, conn);
- rds_connect_complete(conn);
+ rds_connect_complete(conn); /* marks RDS_CONN_UP */
+ new_sock = NULL;
+ ret = 0;
+ goto out;
+rst_nsk:
+ /* reset the newly returned accept sock and bail */
+ nsk = new_sock->sk;
+ rds_tcp_stats_inc(s_tcp_listen_closed_stale);
+ nsk->sk_user_data = NULL;
+ nsk->sk_prot->disconnect(nsk, 0);
+ tcp_done(nsk);
new_sock = NULL;
ret = 0;
-
out:
+ if (rs_tcp)
+ mutex_unlock(&rs_tcp->t_conn_lock);
if (new_sock)
sock_release(new_sock);
return ret;
sch->q.qlen++;
}
+/* netem can't properly corrupt a megapacket (like we get from GSO), so instead
+ * when we statistically choose to corrupt one, we instead segment it, returning
+ * the first packet to be corrupted, and re-enqueue the remaining frames
+ */
+static struct sk_buff *netem_segment(struct sk_buff *skb, struct Qdisc *sch)
+{
+ struct sk_buff *segs;
+ netdev_features_t features = netif_skb_features(skb);
+
+ segs = skb_gso_segment(skb, features & ~NETIF_F_GSO_MASK);
+
+ if (IS_ERR_OR_NULL(segs)) {
+ qdisc_reshape_fail(skb, sch);
+ return NULL;
+ }
+ consume_skb(skb);
+ return segs;
+}
+
/*
* Insert one skb into qdisc.
* Note: parent depends on return value to account for queue length.
/* We don't fill cb now as skb_unshare() may invalidate it */
struct netem_skb_cb *cb;
struct sk_buff *skb2;
+ struct sk_buff *segs = NULL;
+ unsigned int len = 0, last_len, prev_len = qdisc_pkt_len(skb);
+ int nb = 0;
int count = 1;
+ int rc = NET_XMIT_SUCCESS;
/* Random duplication */
if (q->duplicate && q->duplicate >= get_crandom(&q->dup_cor))
* do it now in software before we mangle it.
*/
if (q->corrupt && q->corrupt >= get_crandom(&q->corrupt_cor)) {
+ if (skb_is_gso(skb)) {
+ segs = netem_segment(skb, sch);
+ if (!segs)
+ return NET_XMIT_DROP;
+ } else {
+ segs = skb;
+ }
+
+ skb = segs;
+ segs = segs->next;
+
if (!(skb = skb_unshare(skb, GFP_ATOMIC)) ||
(skb->ip_summed == CHECKSUM_PARTIAL &&
- skb_checksum_help(skb)))
- return qdisc_drop(skb, sch);
+ skb_checksum_help(skb))) {
+ rc = qdisc_drop(skb, sch);
+ goto finish_segs;
+ }
skb->data[prandom_u32() % skb_headlen(skb)] ^=
1<<(prandom_u32() % 8);
sch->qstats.requeues++;
}
+finish_segs:
+ if (segs) {
+ while (segs) {
+ skb2 = segs->next;
+ segs->next = NULL;
+ qdisc_skb_cb(segs)->pkt_len = segs->len;
+ last_len = segs->len;
+ rc = qdisc_enqueue(segs, sch);
+ if (rc != NET_XMIT_SUCCESS) {
+ if (net_xmit_drop_count(rc))
+ qdisc_qstats_drop(sch);
+ } else {
+ nb++;
+ len += last_len;
+ }
+ segs = skb2;
+ }
+ sch->q.qlen += nb;
+ if (nb > 1)
+ qdisc_tree_reduce_backlog(sch, 1 - nb, prev_len - len);
+ }
return NET_XMIT_SUCCESS;
}
if (err && err != -EOPNOTSUPP)
netdev_err(dev, "failed (err=%d) to set attribute (id=%d)\n",
err, attr->id);
+ if (attr->complete)
+ attr->complete(dev, err, attr->complete_priv);
}
static int switchdev_port_attr_set_defer(struct net_device *dev,
if (err && err != -EOPNOTSUPP)
netdev_err(dev, "failed (err=%d) to add object (id=%d)\n",
err, obj->id);
+ if (obj->complete)
+ obj->complete(dev, err, obj->complete_priv);
}
static int switchdev_port_obj_add_defer(struct net_device *dev,
if (err && err != -EOPNOTSUPP)
netdev_err(dev, "failed (err=%d) to del object (id=%d)\n",
err, obj->id);
+ if (obj->complete)
+ obj->complete(dev, err, obj->complete_priv);
}
static int switchdev_port_obj_del_defer(struct net_device *dev,
int bearer_id = b->identity;
struct tipc_link_entry *le;
u16 bc_ack = msg_bcast_ack(hdr);
+ u32 self = tipc_own_addr(net);
int rc = 0;
__skb_queue_head_init(&xmitq);
return tipc_node_bc_rcv(net, skb, bearer_id);
}
+ /* Discard unicast link messages destined for another node */
+ if (unlikely(!msg_short(hdr) && (msg_destnode(hdr) != self)))
+ goto discard;
+
/* Locate neighboring node that sent packet */
n = tipc_node_find(net, msg_prevnode(hdr));
if (unlikely(!n))
u64 cookie;
} data;
- memset(&data, 0, sizeof(data));
data.pid = bpf_get_current_pid_tgid();
data.cookie = 0x12345678;
do_usb_entry_multi(symval + i, mod);
}
+static void do_of_entry_multi(void *symval, struct module *mod)
+{
+ char alias[500];
+ int len;
+ char *tmp;
+
+ DEF_FIELD_ADDR(symval, of_device_id, name);
+ DEF_FIELD_ADDR(symval, of_device_id, type);
+ DEF_FIELD_ADDR(symval, of_device_id, compatible);
+
+ len = sprintf(alias, "of:N%sT%s", (*name)[0] ? *name : "*",
+ (*type)[0] ? *type : "*");
+
+ if (compatible[0])
+ sprintf(&alias[len], "%sC%s", (*type)[0] ? "*" : "",
+ *compatible);
+
+ /* Replace all whitespace with underscores */
+ for (tmp = alias; tmp && *tmp; tmp++)
+ if (isspace(*tmp))
+ *tmp = '_';
+
+ buf_printf(&mod->dev_table_buf, "MODULE_ALIAS(\"%s\");\n", alias);
+ strcat(alias, "C");
+ add_wildcard(alias);
+ buf_printf(&mod->dev_table_buf, "MODULE_ALIAS(\"%s\");\n", alias);
+}
+
+static void do_of_table(void *symval, unsigned long size,
+ struct module *mod)
+{
+ unsigned int i;
+ const unsigned long id_size = SIZE_of_device_id;
+
+ device_id_check(mod->name, "of", size, id_size, symval);
+
+ /* Leave last one: it's the terminator. */
+ size -= id_size;
+
+ for (i = 0; i < size; i += id_size)
+ do_of_entry_multi(symval + i, mod);
+}
+
/* Looks like: hid:bNvNpN */
static int do_hid_entry(const char *filename,
void *symval, char *alias)
}
ADD_TO_DEVTABLE("pcmcia", pcmcia_device_id, do_pcmcia_entry);
-static int do_of_entry (const char *filename, void *symval, char *alias)
-{
- int len;
- char *tmp;
- DEF_FIELD_ADDR(symval, of_device_id, name);
- DEF_FIELD_ADDR(symval, of_device_id, type);
- DEF_FIELD_ADDR(symval, of_device_id, compatible);
-
- len = sprintf(alias, "of:N%sT%s", (*name)[0] ? *name : "*",
- (*type)[0] ? *type : "*");
-
- if (compatible[0])
- sprintf(&alias[len], "%sC%s", (*type)[0] ? "*" : "",
- *compatible);
-
- /* Replace all whitespace with underscores */
- for (tmp = alias; tmp && *tmp; tmp++)
- if (isspace (*tmp))
- *tmp = '_';
-
- return 1;
-}
-ADD_TO_DEVTABLE("of", of_device_id, do_of_entry);
-
static int do_vio_entry(const char *filename, void *symval,
char *alias)
{
/* First handle the "special" cases */
if (sym_is(name, namelen, "usb"))
do_usb_table(symval, sym->st_size, mod);
+ if (sym_is(name, namelen, "of"))
+ do_of_table(symval, sym->st_size, mod);
else if (sym_is(name, namelen, "pnp"))
do_pnp_device_entry(symval, sym->st_size, mod);
else if (sym_is(name, namelen, "pnp_card"))
"BPRM_CHECK",
"MODULE_CHECK",
"FIRMWARE_CHECK",
+ "POST_SETATTR",
"KEXEC_KERNEL_CHECK",
"KEXEC_INITRAMFS_CHECK",
- "POLICY_CHECK",
- "POST_SETATTR"
+ "POLICY_CHECK"
};
void *ima_policy_start(struct seq_file *m, loff_t *pos)
*/
void snd_hdac_stream_free_all(struct hdac_ext_bus *ebus)
{
- struct hdac_stream *s;
+ struct hdac_stream *s, *_s;
struct hdac_ext_stream *stream;
struct hdac_bus *bus = ebus_to_hbus(ebus);
- while (!list_empty(&bus->stream_list)) {
- s = list_first_entry(&bus->stream_list, struct hdac_stream, list);
+ list_for_each_entry_safe(s, _s, &bus->stream_list, list) {
stream = stream_to_hdac_ext_stream(s);
snd_hdac_ext_stream_decouple(ebus, stream, false);
list_del(&s->list);
#include <sound/core.h>
#include <sound/hdaudio.h>
#include <sound/hda_i915.h>
+#include <sound/hda_register.h>
static struct i915_audio_component *hdac_acomp;
}
EXPORT_SYMBOL_GPL(snd_hdac_display_power);
+#define CONTROLLER_IN_GPU(pci) (((pci)->device == 0x0a0c) || \
+ ((pci)->device == 0x0c0c) || \
+ ((pci)->device == 0x0d0c) || \
+ ((pci)->device == 0x160c))
+
/**
- * snd_hdac_get_display_clk - Get CDCLK in kHz
+ * snd_hdac_i915_set_bclk - Reprogram BCLK for HSW/BDW
* @bus: HDA core bus
*
- * This function is supposed to be used only by a HD-audio controller
- * driver that needs the interaction with i915 graphics.
+ * Intel HSW/BDW display HDA controller is in GPU. Both its power and link BCLK
+ * depends on GPU. Two Extended Mode registers EM4 (M value) and EM5 (N Value)
+ * are used to convert CDClk (Core Display Clock) to 24MHz BCLK:
+ * BCLK = CDCLK * M / N
+ * The values will be lost when the display power well is disabled and need to
+ * be restored to avoid abnormal playback speed.
*
- * This function queries CDCLK value in kHz from the graphics driver and
- * returns the value. A negative code is returned in error.
+ * Call this function at initializing and changing power well, as well as
+ * at ELD notifier for the hotplug.
*/
-int snd_hdac_get_display_clk(struct hdac_bus *bus)
+void snd_hdac_i915_set_bclk(struct hdac_bus *bus)
{
struct i915_audio_component *acomp = bus->audio_component;
+ struct pci_dev *pci = to_pci_dev(bus->dev);
+ int cdclk_freq;
+ unsigned int bclk_m, bclk_n;
+
+ if (!acomp || !acomp->ops || !acomp->ops->get_cdclk_freq)
+ return; /* only for i915 binding */
+ if (!CONTROLLER_IN_GPU(pci))
+ return; /* only HSW/BDW */
+
+ cdclk_freq = acomp->ops->get_cdclk_freq(acomp->dev);
+ switch (cdclk_freq) {
+ case 337500:
+ bclk_m = 16;
+ bclk_n = 225;
+ break;
+
+ case 450000:
+ default: /* default CDCLK 450MHz */
+ bclk_m = 4;
+ bclk_n = 75;
+ break;
+
+ case 540000:
+ bclk_m = 4;
+ bclk_n = 90;
+ break;
+
+ case 675000:
+ bclk_m = 8;
+ bclk_n = 225;
+ break;
+ }
- if (!acomp || !acomp->ops)
- return -ENODEV;
-
- return acomp->ops->get_cdclk_freq(acomp->dev);
+ snd_hdac_chip_writew(bus, HSW_EM4, bclk_m);
+ snd_hdac_chip_writew(bus, HSW_EM5, bclk_n);
}
-EXPORT_SYMBOL_GPL(snd_hdac_get_display_clk);
+EXPORT_SYMBOL_GPL(snd_hdac_i915_set_bclk);
/* There is a fixed mapping between audio pin node and display port
* on current Intel platforms:
#define azx_del_card_list(chip) /* NOP */
#endif /* CONFIG_PM */
-/* Intel HSW/BDW display HDA controller is in GPU. Both its power and link BCLK
- * depends on GPU. Two Extended Mode registers EM4 (M value) and EM5 (N Value)
- * are used to convert CDClk (Core Display Clock) to 24MHz BCLK:
- * BCLK = CDCLK * M / N
- * The values will be lost when the display power well is disabled and need to
- * be restored to avoid abnormal playback speed.
- */
-static void haswell_set_bclk(struct hda_intel *hda)
-{
- struct azx *chip = &hda->chip;
- int cdclk_freq;
- unsigned int bclk_m, bclk_n;
-
- if (!hda->need_i915_power)
- return;
-
- cdclk_freq = snd_hdac_get_display_clk(azx_bus(chip));
- switch (cdclk_freq) {
- case 337500:
- bclk_m = 16;
- bclk_n = 225;
- break;
-
- case 450000:
- default: /* default CDCLK 450MHz */
- bclk_m = 4;
- bclk_n = 75;
- break;
-
- case 540000:
- bclk_m = 4;
- bclk_n = 90;
- break;
-
- case 675000:
- bclk_m = 8;
- bclk_n = 225;
- break;
- }
-
- azx_writew(chip, HSW_EM4, bclk_m);
- azx_writew(chip, HSW_EM5, bclk_n);
-}
-
#if defined(CONFIG_PM_SLEEP) || defined(SUPPORT_VGA_SWITCHEROO)
/*
* power management
if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL
&& hda->need_i915_power) {
snd_hdac_display_power(azx_bus(chip), true);
- haswell_set_bclk(hda);
+ snd_hdac_i915_set_bclk(azx_bus(chip));
}
if (chip->msi)
if (pci_enable_msi(pci) < 0)
bus = azx_bus(chip);
if (hda->need_i915_power) {
snd_hdac_display_power(bus, true);
- haswell_set_bclk(hda);
+ snd_hdac_i915_set_bclk(bus);
} else {
/* toggle codec wakeup bit for STATESTS read */
snd_hdac_set_codec_wakeup(bus, true);
/* initialize chip */
azx_init_pci(chip);
- if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) {
- struct hda_intel *hda;
-
- hda = container_of(chip, struct hda_intel, chip);
- haswell_set_bclk(hda);
- }
+ if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL)
+ snd_hdac_i915_set_bclk(bus);
hda_intel_init_chip(chip, (probe_only[dev] & 2) == 0);
if (atomic_read(&(codec)->core.in_pm))
return;
+ snd_hdac_i915_set_bclk(&codec->bus->core);
check_presence_and_report(codec, pin_nid);
}
SND_PCI_QUIRK(0x17aa, 0x5034, "Thinkpad T450", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x5036, "Thinkpad T450s", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x503c, "Thinkpad L450", ALC292_FIXUP_TPT440_DOCK),
+ SND_PCI_QUIRK(0x17aa, 0x504a, "ThinkPad X260", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x504b, "Thinkpad", ALC293_FIXUP_LENOVO_SPK_NOISE),
SND_PCI_QUIRK(0x17aa, 0x5109, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_FIXUP_PCM_44K),
config SND_SOC_RT5616
tristate "Realtek RT5616 CODEC"
+ depends on I2C
config SND_SOC_RT5631
tristate "Realtek ALC5631/RT5631 CODEC"
}
EXPORT_SYMBOL_GPL(arizona_init_spk);
+int arizona_free_spk(struct snd_soc_codec *codec)
+{
+ struct arizona_priv *priv = snd_soc_codec_get_drvdata(codec);
+ struct arizona *arizona = priv->arizona;
+
+ arizona_free_irq(arizona, ARIZONA_IRQ_SPK_OVERHEAT_WARN, arizona);
+ arizona_free_irq(arizona, ARIZONA_IRQ_SPK_OVERHEAT, arizona);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(arizona_free_spk);
+
static const struct snd_soc_dapm_route arizona_mono_routes[] = {
{ "OUT1R", NULL, "OUT1L" },
{ "OUT2R", NULL, "OUT2L" },
extern int arizona_init_gpio(struct snd_soc_codec *codec);
extern int arizona_init_mono(struct snd_soc_codec *codec);
+extern int arizona_free_spk(struct snd_soc_codec *codec);
+
extern int arizona_init_dai(struct arizona_priv *priv, int dai);
int arizona_set_output_mode(struct snd_soc_codec *codec, int output,
if (of_property_read_u32(np, "cirrus,sdout-share", &val) >= 0)
pdata->sdout_share = val;
- of_property_read_u32(np, "cirrus,boost-manager", &val);
+ if (of_property_read_u32(np, "cirrus,boost-manager", &val))
+ val = -1u;
+
switch (val) {
case CS35L32_BOOST_MGR_AUTO:
case CS35L32_BOOST_MGR_AUTO_AUDIO:
case CS35L32_BOOST_MGR_FIXED:
pdata->boost_mng = val;
break;
+ case -1u:
default:
dev_err(&i2c_client->dev,
"Wrong cirrus,boost-manager DT value %d\n", val);
pdata->boost_mng = CS35L32_BOOST_MGR_BYPASS;
}
- of_property_read_u32(np, "cirrus,sdout-datacfg", &val);
+ if (of_property_read_u32(np, "cirrus,sdout-datacfg", &val))
+ val = -1u;
switch (val) {
case CS35L32_DATA_CFG_LR_VP:
case CS35L32_DATA_CFG_LR_STAT:
case CS35L32_DATA_CFG_LR_VPSTAT:
pdata->sdout_datacfg = val;
break;
+ case -1u:
default:
dev_err(&i2c_client->dev,
"Wrong cirrus,sdout-datacfg DT value %d\n", val);
pdata->sdout_datacfg = CS35L32_DATA_CFG_LR;
}
- of_property_read_u32(np, "cirrus,battery-threshold", &val);
+ if (of_property_read_u32(np, "cirrus,battery-threshold", &val))
+ val = -1u;
switch (val) {
case CS35L32_BATT_THRESH_3_1V:
case CS35L32_BATT_THRESH_3_2V:
case CS35L32_BATT_THRESH_3_4V:
pdata->batt_thresh = val;
break;
+ case -1u:
default:
dev_err(&i2c_client->dev,
"Wrong cirrus,battery-threshold DT value %d\n", val);
pdata->batt_thresh = CS35L32_BATT_THRESH_3_3V;
}
- of_property_read_u32(np, "cirrus,battery-recovery", &val);
+ if (of_property_read_u32(np, "cirrus,battery-recovery", &val))
+ val = -1u;
switch (val) {
case CS35L32_BATT_RECOV_3_1V:
case CS35L32_BATT_RECOV_3_2V:
case CS35L32_BATT_RECOV_3_6V:
pdata->batt_recov = val;
break;
+ case -1u:
default:
dev_err(&i2c_client->dev,
"Wrong cirrus,battery-recovery DT value %d\n", val);
priv->core.arizona->dapm = NULL;
arizona_free_irq(arizona, ARIZONA_IRQ_DSP_IRQ1, priv);
+
+ arizona_free_spk(codec);
+
return 0;
}
}
#ifdef CONFIG_PM
-static int hdmi_codec_resume(struct snd_soc_codec *codec)
+static int hdmi_codec_prepare(struct device *dev)
{
- struct hdac_ext_device *edev = snd_soc_codec_get_drvdata(codec);
+ struct hdac_ext_device *edev = to_hda_ext_device(dev);
+ struct hdac_device *hdac = &edev->hdac;
+
+ pm_runtime_get_sync(&edev->hdac.dev);
+
+ /*
+ * Power down afg.
+ * codec_read is preferred over codec_write to set the power state.
+ * This way verb is send to set the power state and response
+ * is received. So setting power state is ensured without using loop
+ * to read the state.
+ */
+ snd_hdac_codec_read(hdac, hdac->afg, 0, AC_VERB_SET_POWER_STATE,
+ AC_PWRST_D3);
+
+ return 0;
+}
+
+static void hdmi_codec_complete(struct device *dev)
+{
+ struct hdac_ext_device *edev = to_hda_ext_device(dev);
struct hdac_hdmi_priv *hdmi = edev->private_data;
struct hdac_hdmi_pin *pin;
struct hdac_device *hdac = &edev->hdac;
- struct hdac_bus *bus = hdac->bus;
- int err;
- unsigned long timeout;
-
- hdac_hdmi_skl_enable_all_pins(&edev->hdac);
- hdac_hdmi_skl_enable_dp12(&edev->hdac);
/* Power up afg */
- if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D0)) {
-
- snd_hdac_codec_write(hdac, hdac->afg, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
+ snd_hdac_codec_read(hdac, hdac->afg, 0, AC_VERB_SET_POWER_STATE,
+ AC_PWRST_D0);
- /* Wait till power state is set to D0 */
- timeout = jiffies + msecs_to_jiffies(1000);
- while (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D0)
- && time_before(jiffies, timeout)) {
- msleep(50);
- }
- }
+ hdac_hdmi_skl_enable_all_pins(&edev->hdac);
+ hdac_hdmi_skl_enable_dp12(&edev->hdac);
/*
* As the ELD notify callback request is not entertained while the
list_for_each_entry(pin, &hdmi->pin_list, head)
hdac_hdmi_present_sense(pin, 1);
- /*
- * Codec power is turned ON during controller resume.
- * Turn it OFF here
- */
- err = snd_hdac_display_power(bus, false);
- if (err < 0) {
- dev_err(bus->dev,
- "Cannot turn OFF display power on i915, err: %d\n",
- err);
- return err;
- }
-
- return 0;
+ pm_runtime_put_sync(&edev->hdac.dev);
}
#else
-#define hdmi_codec_resume NULL
+#define hdmi_codec_prepare NULL
+#define hdmi_codec_complete NULL
#endif
static struct snd_soc_codec_driver hdmi_hda_codec = {
.probe = hdmi_codec_probe,
.remove = hdmi_codec_remove,
- .resume = hdmi_codec_resume,
.idle_bias_off = true,
};
struct hdac_ext_device *edev = to_hda_ext_device(dev);
struct hdac_device *hdac = &edev->hdac;
struct hdac_bus *bus = hdac->bus;
- unsigned long timeout;
int err;
dev_dbg(dev, "Enter: %s\n", __func__);
if (!bus)
return 0;
- /* Power down afg */
- if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D3)) {
- snd_hdac_codec_write(hdac, hdac->afg, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D3);
-
- /* Wait till power state is set to D3 */
- timeout = jiffies + msecs_to_jiffies(1000);
- while (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D3)
- && time_before(jiffies, timeout)) {
-
- msleep(50);
- }
- }
-
+ /*
+ * Power down afg.
+ * codec_read is preferred over codec_write to set the power state.
+ * This way verb is send to set the power state and response
+ * is received. So setting power state is ensured without using loop
+ * to read the state.
+ */
+ snd_hdac_codec_read(hdac, hdac->afg, 0, AC_VERB_SET_POWER_STATE,
+ AC_PWRST_D3);
err = snd_hdac_display_power(bus, false);
if (err < 0) {
dev_err(bus->dev, "Cannot turn on display power on i915\n");
hdac_hdmi_skl_enable_dp12(&edev->hdac);
/* Power up afg */
- if (!snd_hdac_check_power_state(hdac, hdac->afg, AC_PWRST_D0))
- snd_hdac_codec_write(hdac, hdac->afg, 0,
- AC_VERB_SET_POWER_STATE, AC_PWRST_D0);
+ snd_hdac_codec_read(hdac, hdac->afg, 0, AC_VERB_SET_POWER_STATE,
+ AC_PWRST_D0);
return 0;
}
static const struct dev_pm_ops hdac_hdmi_pm = {
SET_RUNTIME_PM_OPS(hdac_hdmi_runtime_suspend, hdac_hdmi_runtime_resume, NULL)
+ .prepare = hdmi_codec_prepare,
+ .complete = hdmi_codec_complete,
};
static const struct hda_device_id hdmi_list[] = {
SND_SOC_DAPM_SUPPLY("ADC Power", NAU8825_REG_ANALOG_ADC_2, 6, 0, NULL,
0),
- /* ADC for button press detection */
- SND_SOC_DAPM_ADC("SAR", NULL, NAU8825_REG_SAR_CTRL,
- NAU8825_SAR_ADC_EN_SFT, 0),
+ /* ADC for button press detection. A dapm supply widget is used to
+ * prevent dapm_power_widgets keeping the codec at SND_SOC_BIAS_ON
+ * during suspend.
+ */
+ SND_SOC_DAPM_SUPPLY("SAR", NAU8825_REG_SAR_CTRL,
+ NAU8825_SAR_ADC_EN_SFT, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("ADACL", 2, NAU8825_REG_RDAC, 12, 0, NULL, 0),
SND_SOC_DAPM_PGA_S("ADACR", 2, NAU8825_REG_RDAC, 13, 0, NULL, 0),
static void nau8825_restart_jack_detection(struct regmap *regmap)
{
+ /* Chip needs one FSCLK cycle in order to generate interrupts,
+ * as we cannot guarantee one will be provided by the system. Turning
+ * master mode on then off enables us to generate that FSCLK cycle
+ * with a minimum of contention on the clock bus.
+ */
+ regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
+ NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER);
+ regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
+ NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE);
+
/* this will restart the entire jack detection process including MIC/GND
* switching and create interrupts. We have to go from 0 to 1 and back
* to 0 to restart.
struct regmap *regmap = nau8825->regmap;
int active_irq, clear_irq = 0, event = 0, event_mask = 0;
- regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq);
+ if (regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq)) {
+ dev_err(nau8825->dev, "failed to read irq status\n");
+ return IRQ_NONE;
+ }
if ((active_irq & NAU8825_JACK_EJECTION_IRQ_MASK) ==
NAU8825_JACK_EJECTION_DETECTED) {
return ret;
}
}
-
- ret = regcache_sync(nau8825->regmap);
- if (ret) {
- dev_err(codec->dev,
- "Failed to sync cache: %d\n", ret);
- return ret;
- }
}
-
break;
case SND_SOC_BIAS_OFF:
if (nau8825->mclk_freq)
clk_disable_unprepare(nau8825->mclk);
-
- regcache_mark_dirty(nau8825->regmap);
break;
}
return 0;
}
+#ifdef CONFIG_PM
+static int nau8825_suspend(struct snd_soc_codec *codec)
+{
+ struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec);
+
+ disable_irq(nau8825->irq);
+ regcache_cache_only(nau8825->regmap, true);
+ regcache_mark_dirty(nau8825->regmap);
+
+ return 0;
+}
+
+static int nau8825_resume(struct snd_soc_codec *codec)
+{
+ struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec);
+
+ /* The chip may lose power and reset in S3. regcache_sync restores
+ * register values including configurations for sysclk, irq, and
+ * jack/button detection.
+ */
+ regcache_cache_only(nau8825->regmap, false);
+ regcache_sync(nau8825->regmap);
+
+ /* Check the jack plug status directly. If the headset is unplugged
+ * during S3 when the chip has no power, there will be no jack
+ * detection irq even after the nau8825_restart_jack_detection below,
+ * because the chip just thinks no headset has ever been plugged in.
+ */
+ if (!nau8825_is_jack_inserted(nau8825->regmap)) {
+ nau8825_eject_jack(nau8825);
+ snd_soc_jack_report(nau8825->jack, 0, SND_JACK_HEADSET);
+ }
+
+ enable_irq(nau8825->irq);
+
+ /* Run jack detection to check the type (OMTP or CTIA) of the headset
+ * if there is one. This handles the case where a different type of
+ * headset is plugged in during S3. This triggers an IRQ iff a headset
+ * is already plugged in.
+ */
+ nau8825_restart_jack_detection(nau8825->regmap);
+
+ return 0;
+}
+#else
+#define nau8825_suspend NULL
+#define nau8825_resume NULL
+#endif
+
static struct snd_soc_codec_driver nau8825_codec_driver = {
.probe = nau8825_codec_probe,
.set_sysclk = nau8825_set_sysclk,
.set_pll = nau8825_set_pll,
.set_bias_level = nau8825_set_bias_level,
.suspend_bias_off = true,
+ .suspend = nau8825_suspend,
+ .resume = nau8825_resume,
.controls = nau8825_controls,
.num_controls = ARRAY_SIZE(nau8825_controls),
regmap_update_bits(regmap, NAU8825_REG_ENA_CTRL,
NAU8825_ENABLE_DACR, NAU8825_ENABLE_DACR);
- /* Chip needs one FSCLK cycle in order to generate interrupts,
- * as we cannot guarantee one will be provided by the system. Turning
- * master mode on then off enables us to generate that FSCLK cycle
- * with a minimum of contention on the clock bus.
- */
- regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
- NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER);
- regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2,
- NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE);
-
ret = devm_request_threaded_irq(nau8825->dev, nau8825->irq, NULL,
nau8825_interrupt, IRQF_TRIGGER_LOW | IRQF_ONESHOT,
"nau8825", nau8825);
return 0;
}
-#ifdef CONFIG_PM_SLEEP
-static int nau8825_suspend(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct nau8825 *nau8825 = dev_get_drvdata(dev);
-
- disable_irq(client->irq);
- regcache_cache_only(nau8825->regmap, true);
- regcache_mark_dirty(nau8825->regmap);
-
- return 0;
-}
-
-static int nau8825_resume(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct nau8825 *nau8825 = dev_get_drvdata(dev);
-
- regcache_cache_only(nau8825->regmap, false);
- regcache_sync(nau8825->regmap);
- enable_irq(client->irq);
-
- return 0;
-}
-#endif
-
-static const struct dev_pm_ops nau8825_pm = {
- SET_SYSTEM_SLEEP_PM_OPS(nau8825_suspend, nau8825_resume)
-};
-
static const struct i2c_device_id nau8825_i2c_ids[] = {
{ "nau8825", 0 },
{ }
.name = "nau8825",
.of_match_table = of_match_ptr(nau8825_of_ids),
.acpi_match_table = ACPI_PTR(nau8825_acpi_match),
- .pm = &nau8825_pm,
},
.probe = nau8825_i2c_probe,
.remove = nau8825_i2c_remove,
/* Interface data select */
static const char * const rt5640_data_select[] = {
- "Normal", "left copy to right", "right copy to left", "Swap"};
+ "Normal", "Swap", "left copy to right", "right copy to left"};
static SOC_ENUM_SINGLE_DECL(rt5640_if1_dac_enum, RT5640_DIG_INF_DATA,
RT5640_IF1_DAC_SEL_SFT, rt5640_data_select);
#define RT5640_IF1_DAC_SEL_MASK (0x3 << 14)
#define RT5640_IF1_DAC_SEL_SFT 14
#define RT5640_IF1_DAC_SEL_NOR (0x0 << 14)
-#define RT5640_IF1_DAC_SEL_L2R (0x1 << 14)
-#define RT5640_IF1_DAC_SEL_R2L (0x2 << 14)
-#define RT5640_IF1_DAC_SEL_SWAP (0x3 << 14)
+#define RT5640_IF1_DAC_SEL_SWAP (0x1 << 14)
+#define RT5640_IF1_DAC_SEL_L2R (0x2 << 14)
+#define RT5640_IF1_DAC_SEL_R2L (0x3 << 14)
#define RT5640_IF1_ADC_SEL_MASK (0x3 << 12)
#define RT5640_IF1_ADC_SEL_SFT 12
#define RT5640_IF1_ADC_SEL_NOR (0x0 << 12)
-#define RT5640_IF1_ADC_SEL_L2R (0x1 << 12)
-#define RT5640_IF1_ADC_SEL_R2L (0x2 << 12)
-#define RT5640_IF1_ADC_SEL_SWAP (0x3 << 12)
+#define RT5640_IF1_ADC_SEL_SWAP (0x1 << 12)
+#define RT5640_IF1_ADC_SEL_L2R (0x2 << 12)
+#define RT5640_IF1_ADC_SEL_R2L (0x3 << 12)
#define RT5640_IF2_DAC_SEL_MASK (0x3 << 10)
#define RT5640_IF2_DAC_SEL_SFT 10
#define RT5640_IF2_DAC_SEL_NOR (0x0 << 10)
-#define RT5640_IF2_DAC_SEL_L2R (0x1 << 10)
-#define RT5640_IF2_DAC_SEL_R2L (0x2 << 10)
-#define RT5640_IF2_DAC_SEL_SWAP (0x3 << 10)
+#define RT5640_IF2_DAC_SEL_SWAP (0x1 << 10)
+#define RT5640_IF2_DAC_SEL_L2R (0x2 << 10)
+#define RT5640_IF2_DAC_SEL_R2L (0x3 << 10)
#define RT5640_IF2_ADC_SEL_MASK (0x3 << 8)
#define RT5640_IF2_ADC_SEL_SFT 8
#define RT5640_IF2_ADC_SEL_NOR (0x0 << 8)
-#define RT5640_IF2_ADC_SEL_L2R (0x1 << 8)
-#define RT5640_IF2_ADC_SEL_R2L (0x2 << 8)
-#define RT5640_IF2_ADC_SEL_SWAP (0x3 << 8)
+#define RT5640_IF2_ADC_SEL_SWAP (0x1 << 8)
+#define RT5640_IF2_ADC_SEL_L2R (0x2 << 8)
+#define RT5640_IF2_ADC_SEL_R2L (0x3 << 8)
#define RT5640_IF3_DAC_SEL_MASK (0x3 << 6)
#define RT5640_IF3_DAC_SEL_SFT 6
#define RT5640_IF3_DAC_SEL_NOR (0x0 << 6)
-#define RT5640_IF3_DAC_SEL_L2R (0x1 << 6)
-#define RT5640_IF3_DAC_SEL_R2L (0x2 << 6)
-#define RT5640_IF3_DAC_SEL_SWAP (0x3 << 6)
+#define RT5640_IF3_DAC_SEL_SWAP (0x1 << 6)
+#define RT5640_IF3_DAC_SEL_L2R (0x2 << 6)
+#define RT5640_IF3_DAC_SEL_R2L (0x3 << 6)
#define RT5640_IF3_ADC_SEL_MASK (0x3 << 4)
#define RT5640_IF3_ADC_SEL_SFT 4
#define RT5640_IF3_ADC_SEL_NOR (0x0 << 4)
-#define RT5640_IF3_ADC_SEL_L2R (0x1 << 4)
-#define RT5640_IF3_ADC_SEL_R2L (0x2 << 4)
-#define RT5640_IF3_ADC_SEL_SWAP (0x3 << 4)
+#define RT5640_IF3_ADC_SEL_SWAP (0x1 << 4)
+#define RT5640_IF3_ADC_SEL_L2R (0x2 << 4)
+#define RT5640_IF3_ADC_SEL_R2L (0x3 << 4)
/* REC Left Mixer Control 1 (0x3b) */
#define RT5640_G_HP_L_RM_L_MASK (0x7 << 13)
static int wm5102_codec_remove(struct snd_soc_codec *codec)
{
struct wm5102_priv *priv = snd_soc_codec_get_drvdata(codec);
+ struct arizona *arizona = priv->core.arizona;
wm_adsp2_codec_remove(&priv->core.adsp[0], codec);
priv->core.arizona->dapm = NULL;
+ arizona_free_irq(arizona, ARIZONA_IRQ_DSP_IRQ1, priv);
+
+ arizona_free_spk(codec);
+
return 0;
}
arizona_free_irq(arizona, ARIZONA_IRQ_DSP_IRQ1, priv);
+ arizona_free_spk(codec);
+
return 0;
}
break;
default:
dev_warn(codec->dev, "Unknown DSPCLK divisor read back\n");
- dspclk = wm8962->sysclk;
+ dspclk = wm8962->sysclk_rate;
}
dev_dbg(codec->dev, "DSPCLK is %dHz, BCLK %d\n", dspclk, wm8962->bclk);
priv->core.arizona->dapm = NULL;
+ arizona_free_spk(codec);
+
return 0;
}
priv->core.arizona->dapm = NULL;
+ arizona_free_spk(codec);
+
return 0;
}
tristate
select SND_HDA_EXT_CORE
select SND_SOC_TOPOLOGY
- select SND_HDA_I915
select SND_SOC_INTEL_SST
config SND_SOC_INTEL_SKL_RT286_MACH
return 0;
/* wait for pause to complete before we reset the stream */
- while (stream->running && tries--)
+ while (stream->running && --tries)
msleep(1);
if (!tries) {
dev_err(hsw->dev, "error: reset stream %d still running\n",
skl_ipc_int_disable(dsp);
free_irq(dsp->irq, dsp);
+ dsp->cl_dev.ops.cl_cleanup_controller(dsp);
+ skl_cldma_int_disable(dsp);
+ skl_ipc_op_int_disable(dsp);
+ skl_ipc_int_disable(dsp);
+
skl_dsp_disable_core(dsp);
}
EXPORT_SYMBOL_GPL(skl_dsp_free);
{
int multiplier = 1;
struct skl_module_fmt *in_fmt, *out_fmt;
+ int in_rate, out_rate;
/* Since fixups is applied to pin 0 only, ibs, obs needs
if (mcfg->m_type == SKL_MODULE_TYPE_SRCINT)
multiplier = 5;
- mcfg->ibs = (in_fmt->s_freq / 1000) *
- (mcfg->in_fmt->channels) *
- (mcfg->in_fmt->bit_depth >> 3) *
- multiplier;
-
- mcfg->obs = (mcfg->out_fmt->s_freq / 1000) *
- (mcfg->out_fmt->channels) *
- (mcfg->out_fmt->bit_depth >> 3) *
- multiplier;
+
+ if (in_fmt->s_freq % 1000)
+ in_rate = (in_fmt->s_freq / 1000) + 1;
+ else
+ in_rate = (in_fmt->s_freq / 1000);
+
+ mcfg->ibs = in_rate * (mcfg->in_fmt->channels) *
+ (mcfg->in_fmt->bit_depth >> 3) *
+ multiplier;
+
+ if (mcfg->out_fmt->s_freq % 1000)
+ out_rate = (mcfg->out_fmt->s_freq / 1000) + 1;
+ else
+ out_rate = (mcfg->out_fmt->s_freq / 1000);
+
+ mcfg->obs = out_rate * (mcfg->out_fmt->channels) *
+ (mcfg->out_fmt->bit_depth >> 3) *
+ multiplier;
}
static int skl_tplg_update_be_blob(struct snd_soc_dapm_widget *w,
if (!skl_is_pipe_mcps_avail(skl, mconfig))
return -ENOMEM;
+ skl_tplg_alloc_pipe_mcps(skl, mconfig);
+
if (mconfig->is_loadable && ctx->dsp->fw_ops.load_mod) {
ret = ctx->dsp->fw_ops.load_mod(ctx->dsp,
mconfig->id.module_id, mconfig->guid);
if (ret < 0)
return ret;
+
+ mconfig->m_state = SKL_MODULE_LOADED;
}
/* update blob if blob is null for be with default value */
ret = skl_tplg_set_module_params(w, ctx);
if (ret < 0)
return ret;
- skl_tplg_alloc_pipe_mcps(skl, mconfig);
}
return 0;
list_for_each_entry(w_module, &pipe->w_list, node) {
mconfig = w_module->w->priv;
- if (mconfig->is_loadable && ctx->dsp->fw_ops.unload_mod)
+ if (mconfig->is_loadable && ctx->dsp->fw_ops.unload_mod &&
+ mconfig->m_state > SKL_MODULE_UNINIT)
return ctx->dsp->fw_ops.unload_mod(ctx->dsp,
mconfig->id.module_id);
}
if (!skl_is_pipe_mem_avail(skl, mconfig))
return -ENOMEM;
+ skl_tplg_alloc_pipe_mem(skl, mconfig);
+ skl_tplg_alloc_pipe_mcps(skl, mconfig);
+
/*
* Create a list of modules for pipe.
* This list contains modules from source to sink
src_module = dst_module;
}
- skl_tplg_alloc_pipe_mem(skl, mconfig);
- skl_tplg_alloc_pipe_mcps(skl, mconfig);
-
return 0;
}
enum skl_module_state {
SKL_MODULE_UNINIT = 0,
- SKL_MODULE_INIT_DONE = 1,
- SKL_MODULE_LOADED = 2,
- SKL_MODULE_UNLOADED = 3,
- SKL_MODULE_BIND_DONE = 4
+ SKL_MODULE_LOADED = 1,
+ SKL_MODULE_INIT_DONE = 2,
+ SKL_MODULE_BIND_DONE = 3,
+ SKL_MODULE_UNLOADED = 4,
};
struct skl_module_cfg {
struct hdac_ext_bus *ebus = pci_get_drvdata(pci);
struct skl *skl = ebus_to_skl(ebus);
struct hdac_bus *bus = ebus_to_hbus(ebus);
+ int ret = 0;
/*
* Do not suspend if streams which are marked ignore suspend are
enable_irq_wake(bus->irq);
pci_save_state(pci);
pci_disable_device(pci);
- return 0;
} else {
- return _skl_suspend(ebus);
+ ret = _skl_suspend(ebus);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) {
+ ret = snd_hdac_display_power(bus, false);
+ if (ret < 0)
+ dev_err(bus->dev,
+ "Cannot turn OFF display power on i915\n");
}
+
+ return ret;
}
static int skl_resume(struct device *dev)
if (bus->irq >= 0)
free_irq(bus->irq, (void *)bus);
- if (bus->remap_addr)
- iounmap(bus->remap_addr);
-
snd_hdac_bus_free_stream_pages(bus);
snd_hdac_stream_free_all(ebus);
snd_hdac_link_free_all(ebus);
+
+ if (bus->remap_addr)
+ iounmap(bus->remap_addr);
+
pci_release_regions(skl->pci);
pci_disable_device(skl->pci);
snd_hdac_ext_bus_exit(ebus);
+ if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI))
+ snd_hdac_i915_exit(&ebus->bus);
return 0;
}
if (skl->tplg)
release_firmware(skl->tplg);
- if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI))
- snd_hdac_i915_exit(&ebus->bus);
-
if (pci_dev_run_wake(pci))
pm_runtime_get_noresume(&pci->dev);
- pci_dev_put(pci);
+
+ /* codec removal, invoke bus_device_remove */
+ snd_hdac_ext_bus_device_remove(ebus);
+
skl_platform_unregister(&pci->dev);
skl_free_dsp(skl);
skl_machine_device_unregister(skl);
int count = 0;
char *state = "not set";
+ /* card won't be set for the dummy component, as a spot fix
+ * we're checking for that case specifically here but in future
+ * we will ensure that the dummy component looks like others.
+ */
+ if (!cmpnt->card)
+ return 0;
+
list_for_each_entry(w, &cmpnt->card->widgets, list) {
if (w->dapm != dapm)
continue;
# and _should_ modify the PACKAGE_BUGREPORT definition
VERSION= $(shell ./utils/version-gen.sh)
-LIB_MAJ= 0.0.0
+LIB_MAJ= 0.0.1
LIB_MIN= 0
PACKAGE = cpupower
CFLAGS += -DVERSION=\"$(VERSION)\" -DPACKAGE=\"$(PACKAGE)\" \
-DPACKAGE_BUGREPORT=\"$(PACKAGE_BUGREPORT)\" -D_GNU_SOURCE
-UTIL_OBJS = utils/helpers/amd.o utils/helpers/topology.o utils/helpers/msr.o \
+UTIL_OBJS = utils/helpers/amd.o utils/helpers/msr.o \
utils/helpers/sysfs.o utils/helpers/misc.o utils/helpers/cpuid.o \
utils/helpers/pci.o utils/helpers/bitmask.o \
utils/idle_monitor/nhm_idle.o utils/idle_monitor/snb_idle.o \
utils/helpers/bitmask.h \
utils/idle_monitor/idle_monitors.h utils/idle_monitor/idle_monitors.def
-LIB_HEADERS = lib/cpufreq.h lib/sysfs.h
-LIB_SRC = lib/cpufreq.c lib/sysfs.c
-LIB_OBJS = lib/cpufreq.o lib/sysfs.o
+LIB_HEADERS = lib/cpufreq.h lib/cpupower.h lib/cpuidle.h
+LIB_SRC = lib/cpufreq.c lib/cpupower.c lib/cpuidle.c
+LIB_OBJS = lib/cpufreq.o lib/cpupower.o lib/cpuidle.o
LIB_OBJS := $(addprefix $(OUTPUT),$(LIB_OBJS))
CFLAGS += -pipe
$(CP) $(OUTPUT)libcpupower.so* $(DESTDIR)${libdir}/
$(INSTALL) -d $(DESTDIR)${includedir}
$(INSTALL_DATA) lib/cpufreq.h $(DESTDIR)${includedir}/cpufreq.h
+ $(INSTALL_DATA) lib/cpuidle.h $(DESTDIR)${includedir}/cpuidle.h
install-tools:
$(INSTALL) -d $(DESTDIR)${bindir}
uninstall:
- rm -f $(DESTDIR)${libdir}/libcpupower.*
- rm -f $(DESTDIR)${includedir}/cpufreq.h
+ - rm -f $(DESTDIR)${includedir}/cpuidle.h
- rm -f $(DESTDIR)${bindir}/utils/cpupower
- rm -f $(DESTDIR)${mandir}/man1/cpupower.1
- rm -f $(DESTDIR)${mandir}/man1/cpupower-frequency-set.1
$(OUTPUT)cpufreq-bench: $(OBJS)
$(ECHO) " CC " $@
- $(QUIET) $(CC) -o $@ $(CFLAGS) $(OBJS) $(LIBS)
+ $(QUIET) $(CC) -o $@ $(CFLAGS) $(LDFLAGS) $(OBJS) $(LIBS)
all: $(OUTPUT)cpufreq-bench
-c, --cpu=<unsigned int> CPU Number to use, starting at 0
-p, --prio=<priority> scheduler priority, HIGH, LOW or DEFAULT
-g, --governor=<governor> cpufreq governor to test
--n, --cycles=<int> load/sleep cycles to get an avarage value to compare
+-n, --cycles=<int> load/sleep cycles to get an average value to compare
-r, --rounds<int> load/sleep rounds
-f, --file=<configfile> config file to use
-o, --output=<dir> output dir, must exist
_round, load_time, sleep_time);
if (config->verbose)
- printf("avarage: %lius, rps:%li\n",
+ printf("average: %lius, rps:%li\n",
load_time / calculations,
1000000 * calculations / load_time);
progress_time += sleep_time + load_time;
- /* compare the avarage sleep/load cycles */
+ /* compare the average sleep/load cycles */
fprintf(config->output, "%li ",
powersave_time / config->cycles);
fprintf(config->output, "%.3f\n",
{
FILE *output = NULL;
int len;
- char *filename;
+ char *filename, *filename_tmp;
struct utsname sysdata;
DIR *dir;
len = strlen(dirname) + 30;
filename = malloc(sizeof(char) * len);
+ if (!filename) {
+ perror("malloc");
+ goto out_dir;
+ }
if (uname(&sysdata) == 0) {
len += strlen(sysdata.nodename) + strlen(sysdata.release);
- filename = realloc(filename, sizeof(char) * len);
+ filename_tmp = realloc(filename, sizeof(*filename) * len);
- if (filename == NULL) {
+ if (filename_tmp == NULL) {
+ free(filename);
perror("realloc");
- return NULL;
+ goto out_dir;
}
+ filename = filename_tmp;
snprintf(filename, len - 1, "%s/benchmark_%s_%s_%li.log",
dirname, sysdata.nodename, sysdata.release, time(NULL));
} else {
if (output == NULL) {
perror("fopen");
fprintf(stderr, "error: unable to open logfile\n");
+ goto out;
}
fprintf(stdout, "Logfile: %s\n", filename);
- free(filename);
fprintf(output, "#round load sleep performance powersave percentage\n");
+out:
+ free(filename);
+out_dir:
+ closedir(dir);
return output;
}
#include <sched.h>
#include <cpufreq.h>
+#include <cpupower.h>
#include "config.h"
#include "system.h"
dprintf("set %s as cpufreq governor\n", governor);
- if (cpufreq_cpu_exists(cpu) != 0) {
+ if (cpupower_is_cpu_online(cpu) != 0) {
perror("cpufreq_cpu_exists");
fprintf(stderr, "error: cpu %u does not exist\n", cpu);
return -1;
#include <errno.h>
#include <stdlib.h>
#include <string.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
#include "cpufreq.h"
-#include "sysfs.h"
+#include "cpupower_intern.h"
-int cpufreq_cpu_exists(unsigned int cpu)
+/* CPUFREQ sysfs access **************************************************/
+
+/* helper function to read file from /sys into given buffer */
+/* fname is a relative path under "cpuX/cpufreq" dir */
+static unsigned int sysfs_cpufreq_read_file(unsigned int cpu, const char *fname,
+ char *buf, size_t buflen)
{
- return sysfs_cpu_exists(cpu);
+ char path[SYSFS_PATH_MAX];
+
+ snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpufreq/%s",
+ cpu, fname);
+ return sysfs_read_file(path, buf, buflen);
}
+/* helper function to write a new value to a /sys file */
+/* fname is a relative path under "cpuX/cpufreq" dir */
+static unsigned int sysfs_cpufreq_write_file(unsigned int cpu,
+ const char *fname,
+ const char *value, size_t len)
+{
+ char path[SYSFS_PATH_MAX];
+ int fd;
+ ssize_t numwrite;
+
+ snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpufreq/%s",
+ cpu, fname);
+
+ fd = open(path, O_WRONLY);
+ if (fd == -1)
+ return 0;
+
+ numwrite = write(fd, value, len);
+ if (numwrite < 1) {
+ close(fd);
+ return 0;
+ }
+
+ close(fd);
+
+ return (unsigned int) numwrite;
+}
+
+/* read access to files which contain one numeric value */
+
+enum cpufreq_value {
+ CPUINFO_CUR_FREQ,
+ CPUINFO_MIN_FREQ,
+ CPUINFO_MAX_FREQ,
+ CPUINFO_LATENCY,
+ SCALING_CUR_FREQ,
+ SCALING_MIN_FREQ,
+ SCALING_MAX_FREQ,
+ STATS_NUM_TRANSITIONS,
+ MAX_CPUFREQ_VALUE_READ_FILES
+};
+
+static const char *cpufreq_value_files[MAX_CPUFREQ_VALUE_READ_FILES] = {
+ [CPUINFO_CUR_FREQ] = "cpuinfo_cur_freq",
+ [CPUINFO_MIN_FREQ] = "cpuinfo_min_freq",
+ [CPUINFO_MAX_FREQ] = "cpuinfo_max_freq",
+ [CPUINFO_LATENCY] = "cpuinfo_transition_latency",
+ [SCALING_CUR_FREQ] = "scaling_cur_freq",
+ [SCALING_MIN_FREQ] = "scaling_min_freq",
+ [SCALING_MAX_FREQ] = "scaling_max_freq",
+ [STATS_NUM_TRANSITIONS] = "stats/total_trans"
+};
+
+
+static unsigned long sysfs_cpufreq_get_one_value(unsigned int cpu,
+ enum cpufreq_value which)
+{
+ unsigned long value;
+ unsigned int len;
+ char linebuf[MAX_LINE_LEN];
+ char *endp;
+
+ if (which >= MAX_CPUFREQ_VALUE_READ_FILES)
+ return 0;
+
+ len = sysfs_cpufreq_read_file(cpu, cpufreq_value_files[which],
+ linebuf, sizeof(linebuf));
+
+ if (len == 0)
+ return 0;
+
+ value = strtoul(linebuf, &endp, 0);
+
+ if (endp == linebuf || errno == ERANGE)
+ return 0;
+
+ return value;
+}
+
+/* read access to files which contain one string */
+
+enum cpufreq_string {
+ SCALING_DRIVER,
+ SCALING_GOVERNOR,
+ MAX_CPUFREQ_STRING_FILES
+};
+
+static const char *cpufreq_string_files[MAX_CPUFREQ_STRING_FILES] = {
+ [SCALING_DRIVER] = "scaling_driver",
+ [SCALING_GOVERNOR] = "scaling_governor",
+};
+
+
+static char *sysfs_cpufreq_get_one_string(unsigned int cpu,
+ enum cpufreq_string which)
+{
+ char linebuf[MAX_LINE_LEN];
+ char *result;
+ unsigned int len;
+
+ if (which >= MAX_CPUFREQ_STRING_FILES)
+ return NULL;
+
+ len = sysfs_cpufreq_read_file(cpu, cpufreq_string_files[which],
+ linebuf, sizeof(linebuf));
+ if (len == 0)
+ return NULL;
+
+ result = strdup(linebuf);
+ if (result == NULL)
+ return NULL;
+
+ if (result[strlen(result) - 1] == '\n')
+ result[strlen(result) - 1] = '\0';
+
+ return result;
+}
+
+/* write access */
+
+enum cpufreq_write {
+ WRITE_SCALING_MIN_FREQ,
+ WRITE_SCALING_MAX_FREQ,
+ WRITE_SCALING_GOVERNOR,
+ WRITE_SCALING_SET_SPEED,
+ MAX_CPUFREQ_WRITE_FILES
+};
+
+static const char *cpufreq_write_files[MAX_CPUFREQ_WRITE_FILES] = {
+ [WRITE_SCALING_MIN_FREQ] = "scaling_min_freq",
+ [WRITE_SCALING_MAX_FREQ] = "scaling_max_freq",
+ [WRITE_SCALING_GOVERNOR] = "scaling_governor",
+ [WRITE_SCALING_SET_SPEED] = "scaling_setspeed",
+};
+
+static int sysfs_cpufreq_write_one_value(unsigned int cpu,
+ enum cpufreq_write which,
+ const char *new_value, size_t len)
+{
+ if (which >= MAX_CPUFREQ_WRITE_FILES)
+ return 0;
+
+ if (sysfs_cpufreq_write_file(cpu, cpufreq_write_files[which],
+ new_value, len) != len)
+ return -ENODEV;
+
+ return 0;
+};
+
unsigned long cpufreq_get_freq_kernel(unsigned int cpu)
{
- return sysfs_get_freq_kernel(cpu);
+ return sysfs_cpufreq_get_one_value(cpu, SCALING_CUR_FREQ);
}
unsigned long cpufreq_get_freq_hardware(unsigned int cpu)
{
- return sysfs_get_freq_hardware(cpu);
+ return sysfs_cpufreq_get_one_value(cpu, CPUINFO_CUR_FREQ);
}
unsigned long cpufreq_get_transition_latency(unsigned int cpu)
{
- return sysfs_get_freq_transition_latency(cpu);
+ return sysfs_cpufreq_get_one_value(cpu, CPUINFO_LATENCY);
}
int cpufreq_get_hardware_limits(unsigned int cpu,
{
if ((!min) || (!max))
return -EINVAL;
- return sysfs_get_freq_hardware_limits(cpu, min, max);
+
+ *min = sysfs_cpufreq_get_one_value(cpu, CPUINFO_MIN_FREQ);
+ if (!*min)
+ return -ENODEV;
+
+ *max = sysfs_cpufreq_get_one_value(cpu, CPUINFO_MAX_FREQ);
+ if (!*max)
+ return -ENODEV;
+
+ return 0;
}
char *cpufreq_get_driver(unsigned int cpu)
{
- return sysfs_get_freq_driver(cpu);
+ return sysfs_cpufreq_get_one_string(cpu, SCALING_DRIVER);
}
void cpufreq_put_driver(char *ptr)
struct cpufreq_policy *cpufreq_get_policy(unsigned int cpu)
{
- return sysfs_get_freq_policy(cpu);
+ struct cpufreq_policy *policy;
+
+ policy = malloc(sizeof(struct cpufreq_policy));
+ if (!policy)
+ return NULL;
+
+ policy->governor = sysfs_cpufreq_get_one_string(cpu, SCALING_GOVERNOR);
+ if (!policy->governor) {
+ free(policy);
+ return NULL;
+ }
+ policy->min = sysfs_cpufreq_get_one_value(cpu, SCALING_MIN_FREQ);
+ policy->max = sysfs_cpufreq_get_one_value(cpu, SCALING_MAX_FREQ);
+ if ((!policy->min) || (!policy->max)) {
+ free(policy->governor);
+ free(policy);
+ return NULL;
+ }
+
+ return policy;
}
void cpufreq_put_policy(struct cpufreq_policy *policy)
struct cpufreq_available_governors *cpufreq_get_available_governors(unsigned
int cpu)
{
- return sysfs_get_freq_available_governors(cpu);
+ struct cpufreq_available_governors *first = NULL;
+ struct cpufreq_available_governors *current = NULL;
+ char linebuf[MAX_LINE_LEN];
+ unsigned int pos, i;
+ unsigned int len;
+
+ len = sysfs_cpufreq_read_file(cpu, "scaling_available_governors",
+ linebuf, sizeof(linebuf));
+ if (len == 0)
+ return NULL;
+
+ pos = 0;
+ for (i = 0; i < len; i++) {
+ if (linebuf[i] == ' ' || linebuf[i] == '\n') {
+ if (i - pos < 2)
+ continue;
+ if (current) {
+ current->next = malloc(sizeof(*current));
+ if (!current->next)
+ goto error_out;
+ current = current->next;
+ } else {
+ first = malloc(sizeof(*first));
+ if (!first)
+ goto error_out;
+ current = first;
+ }
+ current->first = first;
+ current->next = NULL;
+
+ current->governor = malloc(i - pos + 1);
+ if (!current->governor)
+ goto error_out;
+
+ memcpy(current->governor, linebuf + pos, i - pos);
+ current->governor[i - pos] = '\0';
+ pos = i + 1;
+ }
+ }
+
+ return first;
+
+ error_out:
+ while (first) {
+ current = first->next;
+ if (first->governor)
+ free(first->governor);
+ free(first);
+ first = current;
+ }
+ return NULL;
}
void cpufreq_put_available_governors(struct cpufreq_available_governors *any)
struct cpufreq_available_frequencies
*cpufreq_get_available_frequencies(unsigned int cpu)
{
- return sysfs_get_available_frequencies(cpu);
+ struct cpufreq_available_frequencies *first = NULL;
+ struct cpufreq_available_frequencies *current = NULL;
+ char one_value[SYSFS_PATH_MAX];
+ char linebuf[MAX_LINE_LEN];
+ unsigned int pos, i;
+ unsigned int len;
+
+ len = sysfs_cpufreq_read_file(cpu, "scaling_available_frequencies",
+ linebuf, sizeof(linebuf));
+ if (len == 0)
+ return NULL;
+
+ pos = 0;
+ for (i = 0; i < len; i++) {
+ if (linebuf[i] == ' ' || linebuf[i] == '\n') {
+ if (i - pos < 2)
+ continue;
+ if (i - pos >= SYSFS_PATH_MAX)
+ goto error_out;
+ if (current) {
+ current->next = malloc(sizeof(*current));
+ if (!current->next)
+ goto error_out;
+ current = current->next;
+ } else {
+ first = malloc(sizeof(*first));
+ if (!first)
+ goto error_out;
+ current = first;
+ }
+ current->first = first;
+ current->next = NULL;
+
+ memcpy(one_value, linebuf + pos, i - pos);
+ one_value[i - pos] = '\0';
+ if (sscanf(one_value, "%lu", ¤t->frequency) != 1)
+ goto error_out;
+
+ pos = i + 1;
+ }
+ }
+
+ return first;
+
+ error_out:
+ while (first) {
+ current = first->next;
+ free(first);
+ first = current;
+ }
+ return NULL;
}
void cpufreq_put_available_frequencies(struct cpufreq_available_frequencies
}
}
+static struct cpufreq_affected_cpus *sysfs_get_cpu_list(unsigned int cpu,
+ const char *file)
+{
+ struct cpufreq_affected_cpus *first = NULL;
+ struct cpufreq_affected_cpus *current = NULL;
+ char one_value[SYSFS_PATH_MAX];
+ char linebuf[MAX_LINE_LEN];
+ unsigned int pos, i;
+ unsigned int len;
+
+ len = sysfs_cpufreq_read_file(cpu, file, linebuf, sizeof(linebuf));
+ if (len == 0)
+ return NULL;
+
+ pos = 0;
+ for (i = 0; i < len; i++) {
+ if (i == len || linebuf[i] == ' ' || linebuf[i] == '\n') {
+ if (i - pos < 1)
+ continue;
+ if (i - pos >= SYSFS_PATH_MAX)
+ goto error_out;
+ if (current) {
+ current->next = malloc(sizeof(*current));
+ if (!current->next)
+ goto error_out;
+ current = current->next;
+ } else {
+ first = malloc(sizeof(*first));
+ if (!first)
+ goto error_out;
+ current = first;
+ }
+ current->first = first;
+ current->next = NULL;
+
+ memcpy(one_value, linebuf + pos, i - pos);
+ one_value[i - pos] = '\0';
+
+ if (sscanf(one_value, "%u", ¤t->cpu) != 1)
+ goto error_out;
+
+ pos = i + 1;
+ }
+ }
+
+ return first;
+
+ error_out:
+ while (first) {
+ current = first->next;
+ free(first);
+ first = current;
+ }
+ return NULL;
+}
struct cpufreq_affected_cpus *cpufreq_get_affected_cpus(unsigned int cpu)
{
- return sysfs_get_freq_affected_cpus(cpu);
+ return sysfs_get_cpu_list(cpu, "affected_cpus");
}
void cpufreq_put_affected_cpus(struct cpufreq_affected_cpus *any)
struct cpufreq_affected_cpus *cpufreq_get_related_cpus(unsigned int cpu)
{
- return sysfs_get_freq_related_cpus(cpu);
+ return sysfs_get_cpu_list(cpu, "related_cpus");
}
void cpufreq_put_related_cpus(struct cpufreq_affected_cpus *any)
cpufreq_put_affected_cpus(any);
}
+static int verify_gov(char *new_gov, char *passed_gov)
+{
+ unsigned int i, j = 0;
+
+ if (!passed_gov || (strlen(passed_gov) > 19))
+ return -EINVAL;
+
+ strncpy(new_gov, passed_gov, 20);
+ for (i = 0; i < 20; i++) {
+ if (j) {
+ new_gov[i] = '\0';
+ continue;
+ }
+ if ((new_gov[i] >= 'a') && (new_gov[i] <= 'z'))
+ continue;
+
+ if ((new_gov[i] >= 'A') && (new_gov[i] <= 'Z'))
+ continue;
+
+ if (new_gov[i] == '-')
+ continue;
+
+ if (new_gov[i] == '_')
+ continue;
+
+ if (new_gov[i] == '\0') {
+ j = 1;
+ continue;
+ }
+ return -EINVAL;
+ }
+ new_gov[19] = '\0';
+ return 0;
+}
int cpufreq_set_policy(unsigned int cpu, struct cpufreq_policy *policy)
{
+ char min[SYSFS_PATH_MAX];
+ char max[SYSFS_PATH_MAX];
+ char gov[SYSFS_PATH_MAX];
+ int ret;
+ unsigned long old_min;
+ int write_max_first;
+
if (!policy || !(policy->governor))
return -EINVAL;
- return sysfs_set_freq_policy(cpu, policy);
+ if (policy->max < policy->min)
+ return -EINVAL;
+
+ if (verify_gov(gov, policy->governor))
+ return -EINVAL;
+
+ snprintf(min, SYSFS_PATH_MAX, "%lu", policy->min);
+ snprintf(max, SYSFS_PATH_MAX, "%lu", policy->max);
+
+ old_min = sysfs_cpufreq_get_one_value(cpu, SCALING_MIN_FREQ);
+ write_max_first = (old_min && (policy->max < old_min) ? 0 : 1);
+
+ if (write_max_first) {
+ ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ,
+ max, strlen(max));
+ if (ret)
+ return ret;
+ }
+
+ ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MIN_FREQ, min,
+ strlen(min));
+ if (ret)
+ return ret;
+
+ if (!write_max_first) {
+ ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ,
+ max, strlen(max));
+ if (ret)
+ return ret;
+ }
+
+ return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_GOVERNOR,
+ gov, strlen(gov));
}
int cpufreq_modify_policy_min(unsigned int cpu, unsigned long min_freq)
{
- return sysfs_modify_freq_policy_min(cpu, min_freq);
+ char value[SYSFS_PATH_MAX];
+
+ snprintf(value, SYSFS_PATH_MAX, "%lu", min_freq);
+
+ return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MIN_FREQ,
+ value, strlen(value));
}
int cpufreq_modify_policy_max(unsigned int cpu, unsigned long max_freq)
{
- return sysfs_modify_freq_policy_max(cpu, max_freq);
-}
+ char value[SYSFS_PATH_MAX];
+
+ snprintf(value, SYSFS_PATH_MAX, "%lu", max_freq);
+ return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ,
+ value, strlen(value));
+}
int cpufreq_modify_policy_governor(unsigned int cpu, char *governor)
{
+ char new_gov[SYSFS_PATH_MAX];
+
if ((!governor) || (strlen(governor) > 19))
return -EINVAL;
- return sysfs_modify_freq_policy_governor(cpu, governor);
+ if (verify_gov(new_gov, governor))
+ return -EINVAL;
+
+ return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_GOVERNOR,
+ new_gov, strlen(new_gov));
}
int cpufreq_set_frequency(unsigned int cpu, unsigned long target_frequency)
{
- return sysfs_set_frequency(cpu, target_frequency);
+ struct cpufreq_policy *pol = cpufreq_get_policy(cpu);
+ char userspace_gov[] = "userspace";
+ char freq[SYSFS_PATH_MAX];
+ int ret;
+
+ if (!pol)
+ return -ENODEV;
+
+ if (strncmp(pol->governor, userspace_gov, 9) != 0) {
+ ret = cpufreq_modify_policy_governor(cpu, userspace_gov);
+ if (ret) {
+ cpufreq_put_policy(pol);
+ return ret;
+ }
+ }
+
+ cpufreq_put_policy(pol);
+
+ snprintf(freq, SYSFS_PATH_MAX, "%lu", target_frequency);
+
+ return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_SET_SPEED,
+ freq, strlen(freq));
}
struct cpufreq_stats *cpufreq_get_stats(unsigned int cpu,
unsigned long long *total_time)
{
- return sysfs_get_freq_stats(cpu, total_time);
+ struct cpufreq_stats *first = NULL;
+ struct cpufreq_stats *current = NULL;
+ char one_value[SYSFS_PATH_MAX];
+ char linebuf[MAX_LINE_LEN];
+ unsigned int pos, i;
+ unsigned int len;
+
+ len = sysfs_cpufreq_read_file(cpu, "stats/time_in_state",
+ linebuf, sizeof(linebuf));
+ if (len == 0)
+ return NULL;
+
+ *total_time = 0;
+ pos = 0;
+ for (i = 0; i < len; i++) {
+ if (i == strlen(linebuf) || linebuf[i] == '\n') {
+ if (i - pos < 2)
+ continue;
+ if ((i - pos) >= SYSFS_PATH_MAX)
+ goto error_out;
+ if (current) {
+ current->next = malloc(sizeof(*current));
+ if (!current->next)
+ goto error_out;
+ current = current->next;
+ } else {
+ first = malloc(sizeof(*first));
+ if (!first)
+ goto error_out;
+ current = first;
+ }
+ current->first = first;
+ current->next = NULL;
+
+ memcpy(one_value, linebuf + pos, i - pos);
+ one_value[i - pos] = '\0';
+ if (sscanf(one_value, "%lu %llu",
+ ¤t->frequency,
+ ¤t->time_in_state) != 2)
+ goto error_out;
+
+ *total_time = *total_time + current->time_in_state;
+ pos = i + 1;
+ }
+ }
+
+ return first;
+
+ error_out:
+ while (first) {
+ current = first->next;
+ free(first);
+ first = current;
+ }
+ return NULL;
}
void cpufreq_put_stats(struct cpufreq_stats *any)
unsigned long cpufreq_get_transitions(unsigned int cpu)
{
- return sysfs_get_freq_transitions(cpu);
+ return sysfs_cpufreq_get_one_value(cpu, STATS_NUM_TRANSITIONS);
}
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#ifndef _CPUFREQ_H
-#define _CPUFREQ_H 1
+#ifndef __CPUPOWER_CPUFREQ_H__
+#define __CPUPOWER_CPUFREQ_H__
struct cpufreq_policy {
unsigned long min;
extern "C" {
#endif
-/*
- * returns 0 if the specified CPU is present (it doesn't say
- * whether it is online!), and an error value if not.
- */
-
-extern int cpufreq_cpu_exists(unsigned int cpu);
-
/* determine current CPU frequency
* - _kernel variant means kernel's opinion of CPU frequency
* - _hardware variant means actual hardware CPU frequency,
* returns 0 on failure, else frequency in kHz.
*/
-extern unsigned long cpufreq_get_freq_kernel(unsigned int cpu);
+unsigned long cpufreq_get_freq_kernel(unsigned int cpu);
-extern unsigned long cpufreq_get_freq_hardware(unsigned int cpu);
+unsigned long cpufreq_get_freq_hardware(unsigned int cpu);
#define cpufreq_get(cpu) cpufreq_get_freq_kernel(cpu);
*
* returns 0 on failure, else transition latency in 10^(-9) s = nanoseconds
*/
-extern unsigned long cpufreq_get_transition_latency(unsigned int cpu);
+unsigned long cpufreq_get_transition_latency(unsigned int cpu);
/* determine hardware CPU frequency limits
* considerations by cpufreq policy notifiers in the kernel.
*/
-extern int cpufreq_get_hardware_limits(unsigned int cpu,
+int cpufreq_get_hardware_limits(unsigned int cpu,
unsigned long *min,
unsigned long *max);
* to avoid memory leakage, please.
*/
-extern char *cpufreq_get_driver(unsigned int cpu);
+char *cpufreq_get_driver(unsigned int cpu);
-extern void cpufreq_put_driver(char *ptr);
+void cpufreq_put_driver(char *ptr);
/* determine CPUfreq policy currently used
*/
-extern struct cpufreq_policy *cpufreq_get_policy(unsigned int cpu);
+struct cpufreq_policy *cpufreq_get_policy(unsigned int cpu);
-extern void cpufreq_put_policy(struct cpufreq_policy *policy);
+void cpufreq_put_policy(struct cpufreq_policy *policy);
/* determine CPUfreq governors currently available
*/
-extern struct cpufreq_available_governors
+struct cpufreq_available_governors
*cpufreq_get_available_governors(unsigned int cpu);
-extern void cpufreq_put_available_governors(
+void cpufreq_put_available_governors(
struct cpufreq_available_governors *first);
* cpufreq_put_available_frequencies after use.
*/
-extern struct cpufreq_available_frequencies
+struct cpufreq_available_frequencies
*cpufreq_get_available_frequencies(unsigned int cpu);
-extern void cpufreq_put_available_frequencies(
+void cpufreq_put_available_frequencies(
struct cpufreq_available_frequencies *first);
* to avoid memory leakage, please.
*/
-extern struct cpufreq_affected_cpus *cpufreq_get_affected_cpus(unsigned
+struct cpufreq_affected_cpus *cpufreq_get_affected_cpus(unsigned
int cpu);
-extern void cpufreq_put_affected_cpus(struct cpufreq_affected_cpus *first);
+void cpufreq_put_affected_cpus(struct cpufreq_affected_cpus *first);
/* determine related CPUs
* to avoid memory leakage, please.
*/
-extern struct cpufreq_affected_cpus *cpufreq_get_related_cpus(unsigned
+struct cpufreq_affected_cpus *cpufreq_get_related_cpus(unsigned
int cpu);
-extern void cpufreq_put_related_cpus(struct cpufreq_affected_cpus *first);
+void cpufreq_put_related_cpus(struct cpufreq_affected_cpus *first);
/* determine stats for cpufreq subsystem
* This is not available in all kernel versions or configurations.
*/
-extern struct cpufreq_stats *cpufreq_get_stats(unsigned int cpu,
+struct cpufreq_stats *cpufreq_get_stats(unsigned int cpu,
unsigned long long *total_time);
-extern void cpufreq_put_stats(struct cpufreq_stats *stats);
+void cpufreq_put_stats(struct cpufreq_stats *stats);
-extern unsigned long cpufreq_get_transitions(unsigned int cpu);
+unsigned long cpufreq_get_transitions(unsigned int cpu);
/* set new cpufreq policy
* but results may differ depending e.g. on governors being available.
*/
-extern int cpufreq_set_policy(unsigned int cpu, struct cpufreq_policy *policy);
+int cpufreq_set_policy(unsigned int cpu, struct cpufreq_policy *policy);
/* modify a policy by only changing min/max freq or governor
* Does not check whether result is what was intended.
*/
-extern int cpufreq_modify_policy_min(unsigned int cpu, unsigned long min_freq);
-extern int cpufreq_modify_policy_max(unsigned int cpu, unsigned long max_freq);
-extern int cpufreq_modify_policy_governor(unsigned int cpu, char *governor);
+int cpufreq_modify_policy_min(unsigned int cpu, unsigned long min_freq);
+int cpufreq_modify_policy_max(unsigned int cpu, unsigned long max_freq);
+int cpufreq_modify_policy_governor(unsigned int cpu, char *governor);
/* set a specific frequency
* occurs. Also does not work on ->range() cpufreq drivers.
*/
-extern int cpufreq_set_frequency(unsigned int cpu,
+int cpufreq_set_frequency(unsigned int cpu,
unsigned long target_frequency);
#ifdef __cplusplus
--- /dev/null
+/*
+ * (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.de>
+ * (C) 2011 Thomas Renninger <trenn@novell.com> Novell Inc.
+ *
+ * Licensed under the terms of the GNU GPL License version 2.
+ */
+
+#include <stdio.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+
+#include "cpuidle.h"
+#include "cpupower_intern.h"
+
+/*
+ * helper function to check whether a file under "../cpuX/cpuidle/stateX/" dir
+ * exists.
+ * For example the functionality to disable c-states was introduced in later
+ * kernel versions, this function can be used to explicitly check for this
+ * feature.
+ *
+ * returns 1 if the file exists, 0 otherwise.
+ */
+static
+unsigned int cpuidle_state_file_exists(unsigned int cpu,
+ unsigned int idlestate,
+ const char *fname)
+{
+ char path[SYSFS_PATH_MAX];
+ struct stat statbuf;
+
+
+ snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpuidle/state%u/%s",
+ cpu, idlestate, fname);
+ if (stat(path, &statbuf) != 0)
+ return 0;
+ return 1;
+}
+
+/*
+ * helper function to read file from /sys into given buffer
+ * fname is a relative path under "cpuX/cpuidle/stateX/" dir
+ * cstates starting with 0, C0 is not counted as cstate.
+ * This means if you want C1 info, pass 0 as idlestate param
+ */
+static
+unsigned int cpuidle_state_read_file(unsigned int cpu,
+ unsigned int idlestate,
+ const char *fname, char *buf,
+ size_t buflen)
+{
+ char path[SYSFS_PATH_MAX];
+ int fd;
+ ssize_t numread;
+
+ snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpuidle/state%u/%s",
+ cpu, idlestate, fname);
+
+ fd = open(path, O_RDONLY);
+ if (fd == -1)
+ return 0;
+
+ numread = read(fd, buf, buflen - 1);
+ if (numread < 1) {
+ close(fd);
+ return 0;
+ }
+
+ buf[numread] = '\0';
+ close(fd);
+
+ return (unsigned int) numread;
+}
+
+/*
+ * helper function to write a new value to a /sys file
+ * fname is a relative path under "../cpuX/cpuidle/cstateY/" dir
+ *
+ * Returns the number of bytes written or 0 on error
+ */
+static
+unsigned int cpuidle_state_write_file(unsigned int cpu,
+ unsigned int idlestate,
+ const char *fname,
+ const char *value, size_t len)
+{
+ char path[SYSFS_PATH_MAX];
+ int fd;
+ ssize_t numwrite;
+
+ snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpuidle/state%u/%s",
+ cpu, idlestate, fname);
+
+ fd = open(path, O_WRONLY);
+ if (fd == -1)
+ return 0;
+
+ numwrite = write(fd, value, len);
+ if (numwrite < 1) {
+ close(fd);
+ return 0;
+ }
+
+ close(fd);
+
+ return (unsigned int) numwrite;
+}
+
+/* read access to files which contain one numeric value */
+
+enum idlestate_value {
+ IDLESTATE_USAGE,
+ IDLESTATE_POWER,
+ IDLESTATE_LATENCY,
+ IDLESTATE_TIME,
+ IDLESTATE_DISABLE,
+ MAX_IDLESTATE_VALUE_FILES
+};
+
+static const char *idlestate_value_files[MAX_IDLESTATE_VALUE_FILES] = {
+ [IDLESTATE_USAGE] = "usage",
+ [IDLESTATE_POWER] = "power",
+ [IDLESTATE_LATENCY] = "latency",
+ [IDLESTATE_TIME] = "time",
+ [IDLESTATE_DISABLE] = "disable",
+};
+
+static
+unsigned long long cpuidle_state_get_one_value(unsigned int cpu,
+ unsigned int idlestate,
+ enum idlestate_value which)
+{
+ unsigned long long value;
+ unsigned int len;
+ char linebuf[MAX_LINE_LEN];
+ char *endp;
+
+ if (which >= MAX_IDLESTATE_VALUE_FILES)
+ return 0;
+
+ len = cpuidle_state_read_file(cpu, idlestate,
+ idlestate_value_files[which],
+ linebuf, sizeof(linebuf));
+ if (len == 0)
+ return 0;
+
+ value = strtoull(linebuf, &endp, 0);
+
+ if (endp == linebuf || errno == ERANGE)
+ return 0;
+
+ return value;
+}
+
+/* read access to files which contain one string */
+
+enum idlestate_string {
+ IDLESTATE_DESC,
+ IDLESTATE_NAME,
+ MAX_IDLESTATE_STRING_FILES
+};
+
+static const char *idlestate_string_files[MAX_IDLESTATE_STRING_FILES] = {
+ [IDLESTATE_DESC] = "desc",
+ [IDLESTATE_NAME] = "name",
+};
+
+
+static char *cpuidle_state_get_one_string(unsigned int cpu,
+ unsigned int idlestate,
+ enum idlestate_string which)
+{
+ char linebuf[MAX_LINE_LEN];
+ char *result;
+ unsigned int len;
+
+ if (which >= MAX_IDLESTATE_STRING_FILES)
+ return NULL;
+
+ len = cpuidle_state_read_file(cpu, idlestate,
+ idlestate_string_files[which],
+ linebuf, sizeof(linebuf));
+ if (len == 0)
+ return NULL;
+
+ result = strdup(linebuf);
+ if (result == NULL)
+ return NULL;
+
+ if (result[strlen(result) - 1] == '\n')
+ result[strlen(result) - 1] = '\0';
+
+ return result;
+}
+
+/*
+ * Returns:
+ * 1 if disabled
+ * 0 if enabled
+ * -1 if idlestate is not available
+ * -2 if disabling is not supported by the kernel
+ */
+int cpuidle_is_state_disabled(unsigned int cpu,
+ unsigned int idlestate)
+{
+ if (cpuidle_state_count(cpu) <= idlestate)
+ return -1;
+
+ if (!cpuidle_state_file_exists(cpu, idlestate,
+ idlestate_value_files[IDLESTATE_DISABLE]))
+ return -2;
+ return cpuidle_state_get_one_value(cpu, idlestate, IDLESTATE_DISABLE);
+}
+
+/*
+ * Pass 1 as last argument to disable or 0 to enable the state
+ * Returns:
+ * 0 on success
+ * negative values on error, for example:
+ * -1 if idlestate is not available
+ * -2 if disabling is not supported by the kernel
+ * -3 No write access to disable/enable C-states
+ */
+int cpuidle_state_disable(unsigned int cpu,
+ unsigned int idlestate,
+ unsigned int disable)
+{
+ char value[SYSFS_PATH_MAX];
+ int bytes_written;
+
+ if (cpuidle_state_count(cpu) <= idlestate)
+ return -1;
+
+ if (!cpuidle_state_file_exists(cpu, idlestate,
+ idlestate_value_files[IDLESTATE_DISABLE]))
+ return -2;
+
+ snprintf(value, SYSFS_PATH_MAX, "%u", disable);
+
+ bytes_written = cpuidle_state_write_file(cpu, idlestate, "disable",
+ value, sizeof(disable));
+ if (bytes_written)
+ return 0;
+ return -3;
+}
+
+unsigned long cpuidle_state_latency(unsigned int cpu,
+ unsigned int idlestate)
+{
+ return cpuidle_state_get_one_value(cpu, idlestate, IDLESTATE_LATENCY);
+}
+
+unsigned long cpuidle_state_usage(unsigned int cpu,
+ unsigned int idlestate)
+{
+ return cpuidle_state_get_one_value(cpu, idlestate, IDLESTATE_USAGE);
+}
+
+unsigned long long cpuidle_state_time(unsigned int cpu,
+ unsigned int idlestate)
+{
+ return cpuidle_state_get_one_value(cpu, idlestate, IDLESTATE_TIME);
+}
+
+char *cpuidle_state_name(unsigned int cpu, unsigned int idlestate)
+{
+ return cpuidle_state_get_one_string(cpu, idlestate, IDLESTATE_NAME);
+}
+
+char *cpuidle_state_desc(unsigned int cpu, unsigned int idlestate)
+{
+ return cpuidle_state_get_one_string(cpu, idlestate, IDLESTATE_DESC);
+}
+
+/*
+ * Returns number of supported C-states of CPU core cpu
+ * Negativ in error case
+ * Zero if cpuidle does not export any C-states
+ */
+unsigned int cpuidle_state_count(unsigned int cpu)
+{
+ char file[SYSFS_PATH_MAX];
+ struct stat statbuf;
+ int idlestates = 1;
+
+
+ snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU "cpuidle");
+ if (stat(file, &statbuf) != 0 || !S_ISDIR(statbuf.st_mode))
+ return 0;
+
+ snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU "cpu%u/cpuidle/state0", cpu);
+ if (stat(file, &statbuf) != 0 || !S_ISDIR(statbuf.st_mode))
+ return 0;
+
+ while (stat(file, &statbuf) == 0 && S_ISDIR(statbuf.st_mode)) {
+ snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU
+ "cpu%u/cpuidle/state%d", cpu, idlestates);
+ idlestates++;
+ }
+ idlestates--;
+ return idlestates;
+}
+
+/* CPUidle general /sys/devices/system/cpu/cpuidle/ sysfs access ********/
+
+/*
+ * helper function to read file from /sys into given buffer
+ * fname is a relative path under "cpu/cpuidle/" dir
+ */
+static unsigned int sysfs_cpuidle_read_file(const char *fname, char *buf,
+ size_t buflen)
+{
+ char path[SYSFS_PATH_MAX];
+
+ snprintf(path, sizeof(path), PATH_TO_CPU "cpuidle/%s", fname);
+
+ return sysfs_read_file(path, buf, buflen);
+}
+
+
+
+/* read access to files which contain one string */
+
+enum cpuidle_string {
+ CPUIDLE_GOVERNOR,
+ CPUIDLE_GOVERNOR_RO,
+ CPUIDLE_DRIVER,
+ MAX_CPUIDLE_STRING_FILES
+};
+
+static const char *cpuidle_string_files[MAX_CPUIDLE_STRING_FILES] = {
+ [CPUIDLE_GOVERNOR] = "current_governor",
+ [CPUIDLE_GOVERNOR_RO] = "current_governor_ro",
+ [CPUIDLE_DRIVER] = "current_driver",
+};
+
+
+static char *sysfs_cpuidle_get_one_string(enum cpuidle_string which)
+{
+ char linebuf[MAX_LINE_LEN];
+ char *result;
+ unsigned int len;
+
+ if (which >= MAX_CPUIDLE_STRING_FILES)
+ return NULL;
+
+ len = sysfs_cpuidle_read_file(cpuidle_string_files[which],
+ linebuf, sizeof(linebuf));
+ if (len == 0)
+ return NULL;
+
+ result = strdup(linebuf);
+ if (result == NULL)
+ return NULL;
+
+ if (result[strlen(result) - 1] == '\n')
+ result[strlen(result) - 1] = '\0';
+
+ return result;
+}
+
+char *cpuidle_get_governor(void)
+{
+ char *tmp = sysfs_cpuidle_get_one_string(CPUIDLE_GOVERNOR_RO);
+ if (!tmp)
+ return sysfs_cpuidle_get_one_string(CPUIDLE_GOVERNOR);
+ else
+ return tmp;
+}
+
+char *cpuidle_get_driver(void)
+{
+ return sysfs_cpuidle_get_one_string(CPUIDLE_DRIVER);
+}
+/* CPUidle idlestate specific /sys/devices/system/cpu/cpuX/cpuidle/ access */
--- /dev/null
+#ifndef __CPUPOWER_CPUIDLE_H__
+#define __CPUPOWER_CPUIDLE_H__
+
+int cpuidle_is_state_disabled(unsigned int cpu,
+ unsigned int idlestate);
+int cpuidle_state_disable(unsigned int cpu, unsigned int idlestate,
+ unsigned int disable);
+unsigned long cpuidle_state_latency(unsigned int cpu,
+ unsigned int idlestate);
+unsigned long cpuidle_state_usage(unsigned int cpu,
+ unsigned int idlestate);
+unsigned long long cpuidle_state_time(unsigned int cpu,
+ unsigned int idlestate);
+char *cpuidle_state_name(unsigned int cpu,
+ unsigned int idlestate);
+char *cpuidle_state_desc(unsigned int cpu,
+ unsigned int idlestate);
+unsigned int cpuidle_state_count(unsigned int cpu);
+
+char *cpuidle_get_governor(void);
+char *cpuidle_get_driver(void);
+
+#endif /* __CPUPOWER_HELPERS_SYSFS_H__ */
--- /dev/null
+/*
+ * (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.de>
+ *
+ * Licensed under the terms of the GNU GPL License version 2.
+ */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <errno.h>
+#include <stdlib.h>
+
+#include "cpupower.h"
+#include "cpupower_intern.h"
+
+unsigned int sysfs_read_file(const char *path, char *buf, size_t buflen)
+{
+ int fd;
+ ssize_t numread;
+
+ fd = open(path, O_RDONLY);
+ if (fd == -1)
+ return 0;
+
+ numread = read(fd, buf, buflen - 1);
+ if (numread < 1) {
+ close(fd);
+ return 0;
+ }
+
+ buf[numread] = '\0';
+ close(fd);
+
+ return (unsigned int) numread;
+}
+
+/*
+ * Detect whether a CPU is online
+ *
+ * Returns:
+ * 1 -> if CPU is online
+ * 0 -> if CPU is offline
+ * negative errno values in error case
+ */
+int cpupower_is_cpu_online(unsigned int cpu)
+{
+ char path[SYSFS_PATH_MAX];
+ int fd;
+ ssize_t numread;
+ unsigned long long value;
+ char linebuf[MAX_LINE_LEN];
+ char *endp;
+ struct stat statbuf;
+
+ snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u", cpu);
+
+ if (stat(path, &statbuf) != 0)
+ return 0;
+
+ /*
+ * kernel without CONFIG_HOTPLUG_CPU
+ * -> cpuX directory exists, but not cpuX/online file
+ */
+ snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/online", cpu);
+ if (stat(path, &statbuf) != 0)
+ return 1;
+
+ fd = open(path, O_RDONLY);
+ if (fd == -1)
+ return -errno;
+
+ numread = read(fd, linebuf, MAX_LINE_LEN - 1);
+ if (numread < 1) {
+ close(fd);
+ return -EIO;
+ }
+ linebuf[numread] = '\0';
+ close(fd);
+
+ value = strtoull(linebuf, &endp, 0);
+ if (value > 1)
+ return -EINVAL;
+
+ return value;
+}
+
+/* returns -1 on failure, 0 on success */
+static int sysfs_topology_read_file(unsigned int cpu, const char *fname, int *result)
+{
+ char linebuf[MAX_LINE_LEN];
+ char *endp;
+ char path[SYSFS_PATH_MAX];
+
+ snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/topology/%s",
+ cpu, fname);
+ if (sysfs_read_file(path, linebuf, MAX_LINE_LEN) == 0)
+ return -1;
+ *result = strtol(linebuf, &endp, 0);
+ if (endp == linebuf || errno == ERANGE)
+ return -1;
+ return 0;
+}
+
+static int __compare(const void *t1, const void *t2)
+{
+ struct cpuid_core_info *top1 = (struct cpuid_core_info *)t1;
+ struct cpuid_core_info *top2 = (struct cpuid_core_info *)t2;
+ if (top1->pkg < top2->pkg)
+ return -1;
+ else if (top1->pkg > top2->pkg)
+ return 1;
+ else if (top1->core < top2->core)
+ return -1;
+ else if (top1->core > top2->core)
+ return 1;
+ else if (top1->cpu < top2->cpu)
+ return -1;
+ else if (top1->cpu > top2->cpu)
+ return 1;
+ else
+ return 0;
+}
+
+/*
+ * Returns amount of cpus, negative on error, cpu_top must be
+ * passed to cpu_topology_release to free resources
+ *
+ * Array is sorted after ->pkg, ->core, then ->cpu
+ */
+int get_cpu_topology(struct cpupower_topology *cpu_top)
+{
+ int cpu, last_pkg, cpus = sysconf(_SC_NPROCESSORS_CONF);
+
+ cpu_top->core_info = malloc(sizeof(struct cpuid_core_info) * cpus);
+ if (cpu_top->core_info == NULL)
+ return -ENOMEM;
+ cpu_top->pkgs = cpu_top->cores = 0;
+ for (cpu = 0; cpu < cpus; cpu++) {
+ cpu_top->core_info[cpu].cpu = cpu;
+ cpu_top->core_info[cpu].is_online = cpupower_is_cpu_online(cpu);
+ if(sysfs_topology_read_file(
+ cpu,
+ "physical_package_id",
+ &(cpu_top->core_info[cpu].pkg)) < 0) {
+ cpu_top->core_info[cpu].pkg = -1;
+ cpu_top->core_info[cpu].core = -1;
+ continue;
+ }
+ if(sysfs_topology_read_file(
+ cpu,
+ "core_id",
+ &(cpu_top->core_info[cpu].core)) < 0) {
+ cpu_top->core_info[cpu].pkg = -1;
+ cpu_top->core_info[cpu].core = -1;
+ continue;
+ }
+ }
+
+ qsort(cpu_top->core_info, cpus, sizeof(struct cpuid_core_info),
+ __compare);
+
+ /* Count the number of distinct pkgs values. This works
+ because the primary sort of the core_info struct was just
+ done by pkg value. */
+ last_pkg = cpu_top->core_info[0].pkg;
+ for(cpu = 1; cpu < cpus; cpu++) {
+ if (cpu_top->core_info[cpu].pkg != last_pkg &&
+ cpu_top->core_info[cpu].pkg != -1) {
+
+ last_pkg = cpu_top->core_info[cpu].pkg;
+ cpu_top->pkgs++;
+ }
+ }
+ if (!(cpu_top->core_info[0].pkg == -1))
+ cpu_top->pkgs++;
+
+ /* Intel's cores count is not consecutively numbered, there may
+ * be a core_id of 3, but none of 2. Assume there always is 0
+ * Get amount of cores by counting duplicates in a package
+ for (cpu = 0; cpu_top->core_info[cpu].pkg = 0 && cpu < cpus; cpu++) {
+ if (cpu_top->core_info[cpu].core == 0)
+ cpu_top->cores++;
+ */
+ return cpus;
+}
+
+void cpu_topology_release(struct cpupower_topology cpu_top)
+{
+ free(cpu_top.core_info);
+}
--- /dev/null
+#ifndef __CPUPOWER_CPUPOWER_H__
+#define __CPUPOWER_CPUPOWER_H__
+
+struct cpupower_topology {
+ /* Amount of CPU cores, packages and threads per core in the system */
+ unsigned int cores;
+ unsigned int pkgs;
+ unsigned int threads; /* per core */
+
+ /* Array gets mallocated with cores entries, holding per core info */
+ struct cpuid_core_info *core_info;
+};
+
+struct cpuid_core_info {
+ int pkg;
+ int core;
+ int cpu;
+
+ /* flags */
+ unsigned int is_online:1;
+};
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+int get_cpu_topology(struct cpupower_topology *cpu_top);
+void cpu_topology_release(struct cpupower_topology cpu_top);
+int cpupower_is_cpu_online(unsigned int cpu);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null
+#define PATH_TO_CPU "/sys/devices/system/cpu/"
+#define MAX_LINE_LEN 4096
+#define SYSFS_PATH_MAX 255
+
+unsigned int sysfs_read_file(const char *path, char *buf, size_t buflen);
+++ /dev/null
-/*
- * (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.de>
- *
- * Licensed under the terms of the GNU GPL License version 2.
- */
-
-#include <stdio.h>
-#include <errno.h>
-#include <stdlib.h>
-#include <string.h>
-#include <limits.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <unistd.h>
-
-#include "cpufreq.h"
-
-#define PATH_TO_CPU "/sys/devices/system/cpu/"
-#define MAX_LINE_LEN 4096
-#define SYSFS_PATH_MAX 255
-
-
-static unsigned int sysfs_read_file(const char *path, char *buf, size_t buflen)
-{
- int fd;
- ssize_t numread;
-
- fd = open(path, O_RDONLY);
- if (fd == -1)
- return 0;
-
- numread = read(fd, buf, buflen - 1);
- if (numread < 1) {
- close(fd);
- return 0;
- }
-
- buf[numread] = '\0';
- close(fd);
-
- return (unsigned int) numread;
-}
-
-
-/* CPUFREQ sysfs access **************************************************/
-
-/* helper function to read file from /sys into given buffer */
-/* fname is a relative path under "cpuX/cpufreq" dir */
-static unsigned int sysfs_cpufreq_read_file(unsigned int cpu, const char *fname,
- char *buf, size_t buflen)
-{
- char path[SYSFS_PATH_MAX];
-
- snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpufreq/%s",
- cpu, fname);
- return sysfs_read_file(path, buf, buflen);
-}
-
-/* helper function to write a new value to a /sys file */
-/* fname is a relative path under "cpuX/cpufreq" dir */
-static unsigned int sysfs_cpufreq_write_file(unsigned int cpu,
- const char *fname,
- const char *value, size_t len)
-{
- char path[SYSFS_PATH_MAX];
- int fd;
- ssize_t numwrite;
-
- snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpufreq/%s",
- cpu, fname);
-
- fd = open(path, O_WRONLY);
- if (fd == -1)
- return 0;
-
- numwrite = write(fd, value, len);
- if (numwrite < 1) {
- close(fd);
- return 0;
- }
-
- close(fd);
-
- return (unsigned int) numwrite;
-}
-
-/* read access to files which contain one numeric value */
-
-enum cpufreq_value {
- CPUINFO_CUR_FREQ,
- CPUINFO_MIN_FREQ,
- CPUINFO_MAX_FREQ,
- CPUINFO_LATENCY,
- SCALING_CUR_FREQ,
- SCALING_MIN_FREQ,
- SCALING_MAX_FREQ,
- STATS_NUM_TRANSITIONS,
- MAX_CPUFREQ_VALUE_READ_FILES
-};
-
-static const char *cpufreq_value_files[MAX_CPUFREQ_VALUE_READ_FILES] = {
- [CPUINFO_CUR_FREQ] = "cpuinfo_cur_freq",
- [CPUINFO_MIN_FREQ] = "cpuinfo_min_freq",
- [CPUINFO_MAX_FREQ] = "cpuinfo_max_freq",
- [CPUINFO_LATENCY] = "cpuinfo_transition_latency",
- [SCALING_CUR_FREQ] = "scaling_cur_freq",
- [SCALING_MIN_FREQ] = "scaling_min_freq",
- [SCALING_MAX_FREQ] = "scaling_max_freq",
- [STATS_NUM_TRANSITIONS] = "stats/total_trans"
-};
-
-
-static unsigned long sysfs_cpufreq_get_one_value(unsigned int cpu,
- enum cpufreq_value which)
-{
- unsigned long value;
- unsigned int len;
- char linebuf[MAX_LINE_LEN];
- char *endp;
-
- if (which >= MAX_CPUFREQ_VALUE_READ_FILES)
- return 0;
-
- len = sysfs_cpufreq_read_file(cpu, cpufreq_value_files[which],
- linebuf, sizeof(linebuf));
-
- if (len == 0)
- return 0;
-
- value = strtoul(linebuf, &endp, 0);
-
- if (endp == linebuf || errno == ERANGE)
- return 0;
-
- return value;
-}
-
-/* read access to files which contain one string */
-
-enum cpufreq_string {
- SCALING_DRIVER,
- SCALING_GOVERNOR,
- MAX_CPUFREQ_STRING_FILES
-};
-
-static const char *cpufreq_string_files[MAX_CPUFREQ_STRING_FILES] = {
- [SCALING_DRIVER] = "scaling_driver",
- [SCALING_GOVERNOR] = "scaling_governor",
-};
-
-
-static char *sysfs_cpufreq_get_one_string(unsigned int cpu,
- enum cpufreq_string which)
-{
- char linebuf[MAX_LINE_LEN];
- char *result;
- unsigned int len;
-
- if (which >= MAX_CPUFREQ_STRING_FILES)
- return NULL;
-
- len = sysfs_cpufreq_read_file(cpu, cpufreq_string_files[which],
- linebuf, sizeof(linebuf));
- if (len == 0)
- return NULL;
-
- result = strdup(linebuf);
- if (result == NULL)
- return NULL;
-
- if (result[strlen(result) - 1] == '\n')
- result[strlen(result) - 1] = '\0';
-
- return result;
-}
-
-/* write access */
-
-enum cpufreq_write {
- WRITE_SCALING_MIN_FREQ,
- WRITE_SCALING_MAX_FREQ,
- WRITE_SCALING_GOVERNOR,
- WRITE_SCALING_SET_SPEED,
- MAX_CPUFREQ_WRITE_FILES
-};
-
-static const char *cpufreq_write_files[MAX_CPUFREQ_WRITE_FILES] = {
- [WRITE_SCALING_MIN_FREQ] = "scaling_min_freq",
- [WRITE_SCALING_MAX_FREQ] = "scaling_max_freq",
- [WRITE_SCALING_GOVERNOR] = "scaling_governor",
- [WRITE_SCALING_SET_SPEED] = "scaling_setspeed",
-};
-
-static int sysfs_cpufreq_write_one_value(unsigned int cpu,
- enum cpufreq_write which,
- const char *new_value, size_t len)
-{
- if (which >= MAX_CPUFREQ_WRITE_FILES)
- return 0;
-
- if (sysfs_cpufreq_write_file(cpu, cpufreq_write_files[which],
- new_value, len) != len)
- return -ENODEV;
-
- return 0;
-};
-
-unsigned long sysfs_get_freq_kernel(unsigned int cpu)
-{
- return sysfs_cpufreq_get_one_value(cpu, SCALING_CUR_FREQ);
-}
-
-unsigned long sysfs_get_freq_hardware(unsigned int cpu)
-{
- return sysfs_cpufreq_get_one_value(cpu, CPUINFO_CUR_FREQ);
-}
-
-unsigned long sysfs_get_freq_transition_latency(unsigned int cpu)
-{
- return sysfs_cpufreq_get_one_value(cpu, CPUINFO_LATENCY);
-}
-
-int sysfs_get_freq_hardware_limits(unsigned int cpu,
- unsigned long *min,
- unsigned long *max)
-{
- if ((!min) || (!max))
- return -EINVAL;
-
- *min = sysfs_cpufreq_get_one_value(cpu, CPUINFO_MIN_FREQ);
- if (!*min)
- return -ENODEV;
-
- *max = sysfs_cpufreq_get_one_value(cpu, CPUINFO_MAX_FREQ);
- if (!*max)
- return -ENODEV;
-
- return 0;
-}
-
-char *sysfs_get_freq_driver(unsigned int cpu)
-{
- return sysfs_cpufreq_get_one_string(cpu, SCALING_DRIVER);
-}
-
-struct cpufreq_policy *sysfs_get_freq_policy(unsigned int cpu)
-{
- struct cpufreq_policy *policy;
-
- policy = malloc(sizeof(struct cpufreq_policy));
- if (!policy)
- return NULL;
-
- policy->governor = sysfs_cpufreq_get_one_string(cpu, SCALING_GOVERNOR);
- if (!policy->governor) {
- free(policy);
- return NULL;
- }
- policy->min = sysfs_cpufreq_get_one_value(cpu, SCALING_MIN_FREQ);
- policy->max = sysfs_cpufreq_get_one_value(cpu, SCALING_MAX_FREQ);
- if ((!policy->min) || (!policy->max)) {
- free(policy->governor);
- free(policy);
- return NULL;
- }
-
- return policy;
-}
-
-struct cpufreq_available_governors *
-sysfs_get_freq_available_governors(unsigned int cpu) {
- struct cpufreq_available_governors *first = NULL;
- struct cpufreq_available_governors *current = NULL;
- char linebuf[MAX_LINE_LEN];
- unsigned int pos, i;
- unsigned int len;
-
- len = sysfs_cpufreq_read_file(cpu, "scaling_available_governors",
- linebuf, sizeof(linebuf));
- if (len == 0)
- return NULL;
-
- pos = 0;
- for (i = 0; i < len; i++) {
- if (linebuf[i] == ' ' || linebuf[i] == '\n') {
- if (i - pos < 2)
- continue;
- if (current) {
- current->next = malloc(sizeof(*current));
- if (!current->next)
- goto error_out;
- current = current->next;
- } else {
- first = malloc(sizeof(*first));
- if (!first)
- goto error_out;
- current = first;
- }
- current->first = first;
- current->next = NULL;
-
- current->governor = malloc(i - pos + 1);
- if (!current->governor)
- goto error_out;
-
- memcpy(current->governor, linebuf + pos, i - pos);
- current->governor[i - pos] = '\0';
- pos = i + 1;
- }
- }
-
- return first;
-
- error_out:
- while (first) {
- current = first->next;
- if (first->governor)
- free(first->governor);
- free(first);
- first = current;
- }
- return NULL;
-}
-
-
-struct cpufreq_available_frequencies *
-sysfs_get_available_frequencies(unsigned int cpu) {
- struct cpufreq_available_frequencies *first = NULL;
- struct cpufreq_available_frequencies *current = NULL;
- char one_value[SYSFS_PATH_MAX];
- char linebuf[MAX_LINE_LEN];
- unsigned int pos, i;
- unsigned int len;
-
- len = sysfs_cpufreq_read_file(cpu, "scaling_available_frequencies",
- linebuf, sizeof(linebuf));
- if (len == 0)
- return NULL;
-
- pos = 0;
- for (i = 0; i < len; i++) {
- if (linebuf[i] == ' ' || linebuf[i] == '\n') {
- if (i - pos < 2)
- continue;
- if (i - pos >= SYSFS_PATH_MAX)
- goto error_out;
- if (current) {
- current->next = malloc(sizeof(*current));
- if (!current->next)
- goto error_out;
- current = current->next;
- } else {
- first = malloc(sizeof(*first));
- if (!first)
- goto error_out;
- current = first;
- }
- current->first = first;
- current->next = NULL;
-
- memcpy(one_value, linebuf + pos, i - pos);
- one_value[i - pos] = '\0';
- if (sscanf(one_value, "%lu", ¤t->frequency) != 1)
- goto error_out;
-
- pos = i + 1;
- }
- }
-
- return first;
-
- error_out:
- while (first) {
- current = first->next;
- free(first);
- first = current;
- }
- return NULL;
-}
-
-static struct cpufreq_affected_cpus *sysfs_get_cpu_list(unsigned int cpu,
- const char *file)
-{
- struct cpufreq_affected_cpus *first = NULL;
- struct cpufreq_affected_cpus *current = NULL;
- char one_value[SYSFS_PATH_MAX];
- char linebuf[MAX_LINE_LEN];
- unsigned int pos, i;
- unsigned int len;
-
- len = sysfs_cpufreq_read_file(cpu, file, linebuf, sizeof(linebuf));
- if (len == 0)
- return NULL;
-
- pos = 0;
- for (i = 0; i < len; i++) {
- if (i == len || linebuf[i] == ' ' || linebuf[i] == '\n') {
- if (i - pos < 1)
- continue;
- if (i - pos >= SYSFS_PATH_MAX)
- goto error_out;
- if (current) {
- current->next = malloc(sizeof(*current));
- if (!current->next)
- goto error_out;
- current = current->next;
- } else {
- first = malloc(sizeof(*first));
- if (!first)
- goto error_out;
- current = first;
- }
- current->first = first;
- current->next = NULL;
-
- memcpy(one_value, linebuf + pos, i - pos);
- one_value[i - pos] = '\0';
-
- if (sscanf(one_value, "%u", ¤t->cpu) != 1)
- goto error_out;
-
- pos = i + 1;
- }
- }
-
- return first;
-
- error_out:
- while (first) {
- current = first->next;
- free(first);
- first = current;
- }
- return NULL;
-}
-
-struct cpufreq_affected_cpus *sysfs_get_freq_affected_cpus(unsigned int cpu)
-{
- return sysfs_get_cpu_list(cpu, "affected_cpus");
-}
-
-struct cpufreq_affected_cpus *sysfs_get_freq_related_cpus(unsigned int cpu)
-{
- return sysfs_get_cpu_list(cpu, "related_cpus");
-}
-
-struct cpufreq_stats *sysfs_get_freq_stats(unsigned int cpu,
- unsigned long long *total_time) {
- struct cpufreq_stats *first = NULL;
- struct cpufreq_stats *current = NULL;
- char one_value[SYSFS_PATH_MAX];
- char linebuf[MAX_LINE_LEN];
- unsigned int pos, i;
- unsigned int len;
-
- len = sysfs_cpufreq_read_file(cpu, "stats/time_in_state",
- linebuf, sizeof(linebuf));
- if (len == 0)
- return NULL;
-
- *total_time = 0;
- pos = 0;
- for (i = 0; i < len; i++) {
- if (i == strlen(linebuf) || linebuf[i] == '\n') {
- if (i - pos < 2)
- continue;
- if ((i - pos) >= SYSFS_PATH_MAX)
- goto error_out;
- if (current) {
- current->next = malloc(sizeof(*current));
- if (!current->next)
- goto error_out;
- current = current->next;
- } else {
- first = malloc(sizeof(*first));
- if (!first)
- goto error_out;
- current = first;
- }
- current->first = first;
- current->next = NULL;
-
- memcpy(one_value, linebuf + pos, i - pos);
- one_value[i - pos] = '\0';
- if (sscanf(one_value, "%lu %llu",
- ¤t->frequency,
- ¤t->time_in_state) != 2)
- goto error_out;
-
- *total_time = *total_time + current->time_in_state;
- pos = i + 1;
- }
- }
-
- return first;
-
- error_out:
- while (first) {
- current = first->next;
- free(first);
- first = current;
- }
- return NULL;
-}
-
-unsigned long sysfs_get_freq_transitions(unsigned int cpu)
-{
- return sysfs_cpufreq_get_one_value(cpu, STATS_NUM_TRANSITIONS);
-}
-
-static int verify_gov(char *new_gov, char *passed_gov)
-{
- unsigned int i, j = 0;
-
- if (!passed_gov || (strlen(passed_gov) > 19))
- return -EINVAL;
-
- strncpy(new_gov, passed_gov, 20);
- for (i = 0; i < 20; i++) {
- if (j) {
- new_gov[i] = '\0';
- continue;
- }
- if ((new_gov[i] >= 'a') && (new_gov[i] <= 'z'))
- continue;
-
- if ((new_gov[i] >= 'A') && (new_gov[i] <= 'Z'))
- continue;
-
- if (new_gov[i] == '-')
- continue;
-
- if (new_gov[i] == '_')
- continue;
-
- if (new_gov[i] == '\0') {
- j = 1;
- continue;
- }
- return -EINVAL;
- }
- new_gov[19] = '\0';
- return 0;
-}
-
-int sysfs_modify_freq_policy_governor(unsigned int cpu, char *governor)
-{
- char new_gov[SYSFS_PATH_MAX];
-
- if (!governor)
- return -EINVAL;
-
- if (verify_gov(new_gov, governor))
- return -EINVAL;
-
- return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_GOVERNOR,
- new_gov, strlen(new_gov));
-};
-
-int sysfs_modify_freq_policy_max(unsigned int cpu, unsigned long max_freq)
-{
- char value[SYSFS_PATH_MAX];
-
- snprintf(value, SYSFS_PATH_MAX, "%lu", max_freq);
-
- return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ,
- value, strlen(value));
-};
-
-
-int sysfs_modify_freq_policy_min(unsigned int cpu, unsigned long min_freq)
-{
- char value[SYSFS_PATH_MAX];
-
- snprintf(value, SYSFS_PATH_MAX, "%lu", min_freq);
-
- return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MIN_FREQ,
- value, strlen(value));
-};
-
-
-int sysfs_set_freq_policy(unsigned int cpu, struct cpufreq_policy *policy)
-{
- char min[SYSFS_PATH_MAX];
- char max[SYSFS_PATH_MAX];
- char gov[SYSFS_PATH_MAX];
- int ret;
- unsigned long old_min;
- int write_max_first;
-
- if (!policy || !(policy->governor))
- return -EINVAL;
-
- if (policy->max < policy->min)
- return -EINVAL;
-
- if (verify_gov(gov, policy->governor))
- return -EINVAL;
-
- snprintf(min, SYSFS_PATH_MAX, "%lu", policy->min);
- snprintf(max, SYSFS_PATH_MAX, "%lu", policy->max);
-
- old_min = sysfs_cpufreq_get_one_value(cpu, SCALING_MIN_FREQ);
- write_max_first = (old_min && (policy->max < old_min) ? 0 : 1);
-
- if (write_max_first) {
- ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ,
- max, strlen(max));
- if (ret)
- return ret;
- }
-
- ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MIN_FREQ, min,
- strlen(min));
- if (ret)
- return ret;
-
- if (!write_max_first) {
- ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ,
- max, strlen(max));
- if (ret)
- return ret;
- }
-
- return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_GOVERNOR,
- gov, strlen(gov));
-}
-
-int sysfs_set_frequency(unsigned int cpu, unsigned long target_frequency)
-{
- struct cpufreq_policy *pol = sysfs_get_freq_policy(cpu);
- char userspace_gov[] = "userspace";
- char freq[SYSFS_PATH_MAX];
- int ret;
-
- if (!pol)
- return -ENODEV;
-
- if (strncmp(pol->governor, userspace_gov, 9) != 0) {
- ret = sysfs_modify_freq_policy_governor(cpu, userspace_gov);
- if (ret) {
- cpufreq_put_policy(pol);
- return ret;
- }
- }
-
- cpufreq_put_policy(pol);
-
- snprintf(freq, SYSFS_PATH_MAX, "%lu", target_frequency);
-
- return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_SET_SPEED,
- freq, strlen(freq));
-}
-
-/* CPUFREQ sysfs access **************************************************/
-
-/* General sysfs access **************************************************/
-int sysfs_cpu_exists(unsigned int cpu)
-{
- char file[SYSFS_PATH_MAX];
- struct stat statbuf;
-
- snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU "cpu%u/", cpu);
-
- if (stat(file, &statbuf) != 0)
- return -ENOSYS;
-
- return S_ISDIR(statbuf.st_mode) ? 0 : -ENOSYS;
-}
-
-/* General sysfs access **************************************************/
+++ /dev/null
-/* General */
-extern unsigned int sysfs_cpu_exists(unsigned int cpu);
-
-/* CPUfreq */
-extern unsigned long sysfs_get_freq_kernel(unsigned int cpu);
-extern unsigned long sysfs_get_freq_hardware(unsigned int cpu);
-extern unsigned long sysfs_get_freq_transition_latency(unsigned int cpu);
-extern int sysfs_get_freq_hardware_limits(unsigned int cpu,
- unsigned long *min, unsigned long *max);
-extern char *sysfs_get_freq_driver(unsigned int cpu);
-extern struct cpufreq_policy *sysfs_get_freq_policy(unsigned int cpu);
-extern struct cpufreq_available_governors *sysfs_get_freq_available_governors(
- unsigned int cpu);
-extern struct cpufreq_available_frequencies *sysfs_get_available_frequencies(
- unsigned int cpu);
-extern struct cpufreq_affected_cpus *sysfs_get_freq_affected_cpus(
- unsigned int cpu);
-extern struct cpufreq_affected_cpus *sysfs_get_freq_related_cpus(
- unsigned int cpu);
-extern struct cpufreq_stats *sysfs_get_freq_stats(unsigned int cpu,
- unsigned long long *total_time);
-extern unsigned long sysfs_get_freq_transitions(unsigned int cpu);
-extern int sysfs_set_freq_policy(unsigned int cpu,
- struct cpufreq_policy *policy);
-extern int sysfs_modify_freq_policy_min(unsigned int cpu,
- unsigned long min_freq);
-extern int sysfs_modify_freq_policy_max(unsigned int cpu,
- unsigned long max_freq);
-extern int sysfs_modify_freq_policy_governor(unsigned int cpu, char *governor);
-extern int sysfs_set_frequency(unsigned int cpu,
- unsigned long target_frequency);
.TH "CPUPOWER\-FREQUENCY\-INFO" "1" "0.1" "" "cpupower Manual"
.SH "NAME"
.LP
-cpupower frequency\-info \- Utility to retrieve cpufreq kernel information
+cpupower\-frequency\-info \- Utility to retrieve cpufreq kernel information
.SH "SYNTAX"
.LP
cpupower [ \-c cpulist ] frequency\-info [\fIoptions\fP]
.TH "CPUPOWER\-FREQUENCY\-SET" "1" "0.1" "" "cpupower Manual"
.SH "NAME"
.LP
-cpupower frequency\-set \- A small tool which allows to modify cpufreq settings.
+cpupower\-frequency\-set \- A small tool which allows to modify cpufreq settings.
.SH "SYNTAX"
.LP
cpupower [ \-c cpu ] frequency\-set [\fIoptions\fP]
.TH "CPUPOWER-IDLE-INFO" "1" "0.1" "" "cpupower Manual"
.SH "NAME"
.LP
-cpupower idle\-info \- Utility to retrieve cpu idle kernel information
+cpupower\-idle\-info \- Utility to retrieve cpu idle kernel information
.SH "SYNTAX"
.LP
cpupower [ \-c cpulist ] idle\-info [\fIoptions\fP]
.TH "CPUPOWER-IDLE-SET" "1" "0.1" "" "cpupower Manual"
.SH "NAME"
.LP
-cpupower idle\-set \- Utility to set cpu idle state specific kernel options
+cpupower\-idle\-set \- Utility to set cpu idle state specific kernel options
.SH "SYNTAX"
.LP
cpupower [ \-c cpulist ] idle\-info [\fIoptions\fP]
#include <getopt.h>
#include "cpufreq.h"
+#include "cpuidle.h"
#include "helpers/helpers.h"
-#include "helpers/sysfs.h"
#define NORM_FREQ_LEN 32
struct cpufreq_affected_cpus *cpus;
if (!bitmask_isbitset(cpus_chosen, cpu) ||
- cpufreq_cpu_exists(cpu))
+ cpupower_is_cpu_online(cpu))
continue;
cpus = cpufreq_get_related_cpus(cpu);
cpu <= bitmask_last(cpus_chosen); cpu++) {
if (!bitmask_isbitset(cpus_chosen, cpu) ||
- cpufreq_cpu_exists(cpu))
+ cpupower_is_cpu_online(cpu))
continue;
- if (sysfs_is_cpu_online(cpu) != 1)
+ if (cpupower_is_cpu_online(cpu) != 1)
continue;
printf(_("Setting cpu: %d\n"), cpu);
#include <string.h>
#include <getopt.h>
-#include "helpers/helpers.h"
+#include <cpuidle.h>
+
#include "helpers/sysfs.h"
+#include "helpers/helpers.h"
#include "helpers/bitmask.h"
#define LINE_LEN 10
unsigned int idlestates, idlestate;
char *tmp;
- idlestates = sysfs_get_idlestate_count(cpu);
+ idlestates = cpuidle_state_count(cpu);
if (idlestates == 0) {
printf(_("CPU %u: No idle states\n"), cpu);
return;
printf(_("Number of idle states: %d\n"), idlestates);
printf(_("Available idle states:"));
for (idlestate = 0; idlestate < idlestates; idlestate++) {
- tmp = sysfs_get_idlestate_name(cpu, idlestate);
+ tmp = cpuidle_state_name(cpu, idlestate);
if (!tmp)
continue;
printf(" %s", tmp);
return;
for (idlestate = 0; idlestate < idlestates; idlestate++) {
- int disabled = sysfs_is_idlestate_disabled(cpu, idlestate);
+ int disabled = cpuidle_is_state_disabled(cpu, idlestate);
/* Disabled interface not supported on older kernels */
if (disabled < 0)
disabled = 0;
- tmp = sysfs_get_idlestate_name(cpu, idlestate);
+ tmp = cpuidle_state_name(cpu, idlestate);
if (!tmp)
continue;
printf("%s%s:\n", tmp, (disabled) ? " (DISABLED) " : "");
free(tmp);
- tmp = sysfs_get_idlestate_desc(cpu, idlestate);
+ tmp = cpuidle_state_desc(cpu, idlestate);
if (!tmp)
continue;
printf(_("Flags/Description: %s\n"), tmp);
free(tmp);
printf(_("Latency: %lu\n"),
- sysfs_get_idlestate_latency(cpu, idlestate));
+ cpuidle_state_latency(cpu, idlestate));
printf(_("Usage: %lu\n"),
- sysfs_get_idlestate_usage(cpu, idlestate));
+ cpuidle_state_usage(cpu, idlestate));
printf(_("Duration: %llu\n"),
- sysfs_get_idlestate_time(cpu, idlestate));
+ cpuidle_state_time(cpu, idlestate));
}
}
{
char *tmp;
- tmp = sysfs_get_cpuidle_driver();
+ tmp = cpuidle_get_driver();
if (!tmp) {
printf(_("Could not determine cpuidle driver\n"));
return;
printf(_("CPUidle driver: %s\n"), tmp);
free(tmp);
- tmp = sysfs_get_cpuidle_governor();
+ tmp = cpuidle_get_governor();
if (!tmp) {
printf(_("Could not determine cpuidle governor\n"));
return;
long max_allowed_cstate = 2000000000;
unsigned int cstate, cstates;
- cstates = sysfs_get_idlestate_count(cpu);
+ cstates = cpuidle_state_count(cpu);
if (cstates == 0) {
printf(_("CPU %u: No C-states info\n"), cpu);
return;
"type[C%d] "), cstate, cstate);
printf(_("promotion[--] demotion[--] "));
printf(_("latency[%03lu] "),
- sysfs_get_idlestate_latency(cpu, cstate));
+ cpuidle_state_latency(cpu, cstate));
printf(_("usage[%08lu] "),
- sysfs_get_idlestate_usage(cpu, cstate));
+ cpuidle_state_usage(cpu, cstate));
printf(_("duration[%020Lu] \n"),
- sysfs_get_idlestate_time(cpu, cstate));
+ cpuidle_state_time(cpu, cstate));
}
}
#include <limits.h>
#include <string.h>
#include <ctype.h>
-
#include <getopt.h>
-#include "cpufreq.h"
+#include <cpufreq.h>
+#include <cpuidle.h>
+
#include "helpers/helpers.h"
-#include "helpers/sysfs.h"
static struct option info_opts[] = {
{"disable", required_argument, NULL, 'd'},
if (!bitmask_isbitset(cpus_chosen, cpu))
continue;
- if (sysfs_is_cpu_online(cpu) != 1)
+ if (cpupower_is_cpu_online(cpu) != 1)
continue;
- idlestates = sysfs_get_idlestate_count(cpu);
+ idlestates = cpuidle_state_count(cpu);
if (idlestates <= 0)
continue;
switch (param) {
case 'd':
- ret = sysfs_idlestate_disable(cpu, idlestate, 1);
+ ret = cpuidle_state_disable(cpu, idlestate, 1);
if (ret == 0)
printf(_("Idlestate %u disabled on CPU %u\n"), idlestate, cpu);
else if (ret == -1)
idlestate, cpu);
break;
case 'e':
- ret = sysfs_idlestate_disable(cpu, idlestate, 0);
+ ret = cpuidle_state_disable(cpu, idlestate, 0);
if (ret == 0)
printf(_("Idlestate %u enabled on CPU %u\n"), idlestate, cpu);
else if (ret == -1)
break;
case 'D':
for (idlestate = 0; idlestate < idlestates; idlestate++) {
- disabled = sysfs_is_idlestate_disabled
+ disabled = cpuidle_is_state_disabled
(cpu, idlestate);
- state_latency = sysfs_get_idlestate_latency
+ state_latency = cpuidle_state_latency
(cpu, idlestate);
if (disabled == 1) {
if (latency > state_latency){
- ret = sysfs_idlestate_disable
+ ret = cpuidle_state_disable
(cpu, idlestate, 0);
if (ret == 0)
printf(_("Idlestate %u enabled on CPU %u\n"), idlestate, cpu);
continue;
}
if (latency <= state_latency){
- ret = sysfs_idlestate_disable
+ ret = cpuidle_state_disable
(cpu, idlestate, 1);
if (ret == 0)
printf(_("Idlestate %u disabled on CPU %u\n"), idlestate, cpu);
break;
case 'E':
for (idlestate = 0; idlestate < idlestates; idlestate++) {
- disabled = sysfs_is_idlestate_disabled
+ disabled = cpuidle_is_state_disabled
(cpu, idlestate);
if (disabled == 1) {
- ret = sysfs_idlestate_disable
+ ret = cpuidle_state_disable
(cpu, idlestate, 0);
if (ret == 0)
printf(_("Idlestate %u enabled on CPU %u\n"), idlestate, cpu);
#include <locale.h>
#include "helpers/bitmask.h"
+#include <cpupower.h>
/* Internationalization ****************************/
#ifdef NLS
extern struct cpupower_cpu_info cpupower_cpu_info;
/* cpuid and cpuinfo helpers **************************/
-struct cpuid_core_info {
- int pkg;
- int core;
- int cpu;
-
- /* flags */
- unsigned int is_online:1;
-};
-
-/* CPU topology/hierarchy parsing ******************/
-struct cpupower_topology {
- /* Amount of CPU cores, packages and threads per core in the system */
- unsigned int cores;
- unsigned int pkgs;
- unsigned int threads; /* per core */
-
- /* Array gets mallocated with cores entries, holding per core info */
- struct cpuid_core_info *core_info;
-};
-
-extern int get_cpu_topology(struct cpupower_topology *cpu_top);
-extern void cpu_topology_release(struct cpupower_topology cpu_top);
-
-/* CPU topology/hierarchy parsing ******************/
-
/* X86 ONLY ****************************************/
#if defined(__i386__) || defined(__x86_64__)
#include <errno.h>
#include <fcntl.h>
-#include <helpers/helpers.h>
-#include <helpers/sysfs.h>
+#include <cpuidle.h>
-/* returns -1 on failure, 0 on success */
-static int sysfs_topology_read_file(unsigned int cpu, const char *fname, int *result)
-{
- char linebuf[MAX_LINE_LEN];
- char *endp;
- char path[SYSFS_PATH_MAX];
+/* CPU topology/hierarchy parsing ******************/
- snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/topology/%s",
- cpu, fname);
- if (sysfs_read_file(path, linebuf, MAX_LINE_LEN) == 0)
- return -1;
- *result = strtol(linebuf, &endp, 0);
- if (endp == linebuf || errno == ERANGE)
- return -1;
- return 0;
-}
-
-static int __compare(const void *t1, const void *t2)
-{
- struct cpuid_core_info *top1 = (struct cpuid_core_info *)t1;
- struct cpuid_core_info *top2 = (struct cpuid_core_info *)t2;
- if (top1->pkg < top2->pkg)
- return -1;
- else if (top1->pkg > top2->pkg)
- return 1;
- else if (top1->core < top2->core)
- return -1;
- else if (top1->core > top2->core)
- return 1;
- else if (top1->cpu < top2->cpu)
- return -1;
- else if (top1->cpu > top2->cpu)
- return 1;
- else
- return 0;
-}
-
-/*
- * Returns amount of cpus, negative on error, cpu_top must be
- * passed to cpu_topology_release to free resources
- *
- * Array is sorted after ->pkg, ->core, then ->cpu
- */
-int get_cpu_topology(struct cpupower_topology *cpu_top)
-{
- int cpu, last_pkg, cpus = sysconf(_SC_NPROCESSORS_CONF);
-
- cpu_top->core_info = malloc(sizeof(struct cpuid_core_info) * cpus);
- if (cpu_top->core_info == NULL)
- return -ENOMEM;
- cpu_top->pkgs = cpu_top->cores = 0;
- for (cpu = 0; cpu < cpus; cpu++) {
- cpu_top->core_info[cpu].cpu = cpu;
- cpu_top->core_info[cpu].is_online = sysfs_is_cpu_online(cpu);
- if(sysfs_topology_read_file(
- cpu,
- "physical_package_id",
- &(cpu_top->core_info[cpu].pkg)) < 0) {
- cpu_top->core_info[cpu].pkg = -1;
- cpu_top->core_info[cpu].core = -1;
- continue;
- }
- if(sysfs_topology_read_file(
- cpu,
- "core_id",
- &(cpu_top->core_info[cpu].core)) < 0) {
- cpu_top->core_info[cpu].pkg = -1;
- cpu_top->core_info[cpu].core = -1;
- continue;
- }
- }
-
- qsort(cpu_top->core_info, cpus, sizeof(struct cpuid_core_info),
- __compare);
-
- /* Count the number of distinct pkgs values. This works
- because the primary sort of the core_info struct was just
- done by pkg value. */
- last_pkg = cpu_top->core_info[0].pkg;
- for(cpu = 1; cpu < cpus; cpu++) {
- if (cpu_top->core_info[cpu].pkg != last_pkg &&
- cpu_top->core_info[cpu].pkg != -1) {
-
- last_pkg = cpu_top->core_info[cpu].pkg;
- cpu_top->pkgs++;
- }
- }
- if (!(cpu_top->core_info[0].pkg == -1))
- cpu_top->pkgs++;
-
- /* Intel's cores count is not consecutively numbered, there may
- * be a core_id of 3, but none of 2. Assume there always is 0
- * Get amount of cores by counting duplicates in a package
- for (cpu = 0; cpu_top->core_info[cpu].pkg = 0 && cpu < cpus; cpu++) {
- if (cpu_top->core_info[cpu].core == 0)
- cpu_top->cores++;
- */
- return cpus;
-}
-
-void cpu_topology_release(struct cpupower_topology cpu_top)
-{
- free(cpu_top.core_info);
-}
#include <stdint.h>
#include <string.h>
#include <limits.h>
+#include <cpuidle.h>
-#include "helpers/sysfs.h"
#include "helpers/helpers.h"
#include "idle_monitor/cpupower-monitor.h"
for (state = 0; state < cpuidle_sysfs_monitor.hw_states_num;
state++) {
previous_count[cpu][state] =
- sysfs_get_idlestate_time(cpu, state);
+ cpuidle_state_time(cpu, state);
dprint("CPU %d - State: %d - Val: %llu\n",
cpu, state, previous_count[cpu][state]);
}
for (state = 0; state < cpuidle_sysfs_monitor.hw_states_num;
state++) {
current_count[cpu][state] =
- sysfs_get_idlestate_time(cpu, state);
+ cpuidle_state_time(cpu, state);
dprint("CPU %d - State: %d - Val: %llu\n",
cpu, state, previous_count[cpu][state]);
}
char *tmp;
/* Assume idle state count is the same for all CPUs */
- cpuidle_sysfs_monitor.hw_states_num = sysfs_get_idlestate_count(0);
+ cpuidle_sysfs_monitor.hw_states_num = cpuidle_state_count(0);
if (cpuidle_sysfs_monitor.hw_states_num <= 0)
return NULL;
for (num = 0; num < cpuidle_sysfs_monitor.hw_states_num; num++) {
- tmp = sysfs_get_idlestate_name(0, num);
+ tmp = cpuidle_state_name(0, num);
if (tmp == NULL)
continue;
strncpy(cpuidle_cstates[num].name, tmp, CSTATE_NAME_LEN - 1);
free(tmp);
- tmp = sysfs_get_idlestate_desc(0, num);
+ tmp = cpuidle_state_desc(0, num);
if (tmp == NULL)
continue;
strncpy(cpuidle_cstates[num].desc, tmp, CSTATE_DESC_LEN - 1);
projects / linux-2.6-block.git / commitdiff