xhci-pci: Make xhci-pci-renesas a proper modular driver
authorBen Hutchings <ben@decadent.org.uk>
Wed, 31 Jul 2024 20:32:29 +0000 (22:32 +0200)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 7 Aug 2024 10:51:38 +0000 (12:51 +0200)
If CONFIG_USB_XHCI_PCI_RENESAS is enabled, xhci-pci conditionally
calls into the xhci-pci-renesas module, which means both modules must
be loaded to use any xHCI PCI controller.

The MODULE_FIRMWARE declaration in the base xhci-pci module causes
initramfs-tools to check for and warn about missing firmware for the
Renesas xHCI controllers, when any xHCI PCI controller is present.
And because of the previous oddity, simply moving this declaration to
xhci-pci-renesas wouldn't help.

To fix this, reverse the relationship between the modules:

- Remove the quirk for the Renesas xHCIs, and the driver_data
  structure used only for them
- In xhci-pci:
  - Rename xhci_pci_probe() to xhci_pci_common_probe()
  - Export xhci_pci_common_probe() and xhci_pci_remove()
  - Use a new probe function that rejects the Renesas xHCIs and then
    calls the common probe function
- In xhci-pci-renesas:
  - Stop exporting renesas_xhci_check_request_fw()
  - Add a probe function that calls renesas_xhci_check_request_fw()
    followed by xhci_pci_common_probe()
  - Add and register a new pci_driver matching only the Renesas xHCIs
    and using its own probe function, but with other operations the
    same as in xhci-pci
- Make CONFIG_USB_XHCI_PCI_RENESAS depend on CONFIG_USB_XHCI_PCI,
  not the other way around

Finally, move the MODULE_FIRMWARE declaration to xhci-pci-renesas.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Tested-by: Cyril Brulebois <cyril@debamax.com>
Link: https://lore.kernel.org/r/ZqqfXYRJf7kGaqus@decadent.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/host/Kconfig
drivers/usb/host/xhci-pci-renesas.c
drivers/usb/host/xhci-pci.c
drivers/usb/host/xhci-pci.h
drivers/usb/host/xhci.h

index 4448d0ab06f0d4c832ed160fccd15b3de8dd9a2e..d011d6c753edfcb9c03b9c6277761f6ac740a470 100644 (file)
@@ -40,11 +40,11 @@ config USB_XHCI_DBGCAP
 config USB_XHCI_PCI
        tristate
        depends on USB_PCI
-       depends on USB_XHCI_PCI_RENESAS || !USB_XHCI_PCI_RENESAS
        default y
 
 config USB_XHCI_PCI_RENESAS
        tristate "Support for additional Renesas xHCI controller with firmware"
+       depends on USB_XHCI_PCI
        help
          Say 'Y' to enable the support for the Renesas xHCI controller with
          firmware. Make sure you have the firmware for the device and
index 247cc7c2ce70098c0b70814f2d4aac4731dbfa7c..30cc5a1380a5029174f73427abf9a039e0f64dba 100644 (file)
@@ -50,6 +50,8 @@
 #define RENESAS_RETRY  10000
 #define RENESAS_DELAY  10
 
+#define RENESAS_FW_NAME        "renesas_usb_fw.mem"
+
 static int renesas_fw_download_image(struct pci_dev *dev,
                                     const u32 *fw, size_t step, bool rom)
 {
@@ -573,12 +575,10 @@ exit:
        return err;
 }
 
-int renesas_xhci_check_request_fw(struct pci_dev *pdev,
-                                 const struct pci_device_id *id)
+static int renesas_xhci_check_request_fw(struct pci_dev *pdev,
+                                        const struct pci_device_id *id)
 {
-       struct xhci_driver_data *driver_data =
-                       (struct xhci_driver_data *)id->driver_data;
-       const char *fw_name = driver_data->firmware;
+       const char fw_name[] = RENESAS_FW_NAME;
        const struct firmware *fw;
        bool has_rom;
        int err;
@@ -625,7 +625,41 @@ exit:
        release_firmware(fw);
        return err;
 }
-EXPORT_SYMBOL_GPL(renesas_xhci_check_request_fw);
 
-MODULE_DESCRIPTION("Support for Renesas xHCI controller with firmware");
+static int
+xhci_pci_renesas_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+       int retval;
+
+       retval = renesas_xhci_check_request_fw(dev, id);
+       if (retval)
+               return retval;
+
+       return xhci_pci_common_probe(dev, id);
+}
+
+static const struct pci_device_id pci_ids[] = {
+       { PCI_DEVICE(PCI_VENDOR_ID_RENESAS, 0x0014) },
+       { PCI_DEVICE(PCI_VENDOR_ID_RENESAS, 0x0015) },
+       { /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+static struct pci_driver xhci_renesas_pci_driver = {
+       .name =         "xhci-pci-renesas",
+       .id_table =     pci_ids,
+
+       .probe =        xhci_pci_renesas_probe,
+       .remove =       xhci_pci_remove,
+
+       .shutdown =     usb_hcd_pci_shutdown,
+       .driver = {
+               .pm = pm_ptr(&usb_hcd_pci_pm_ops),
+       },
+};
+module_pci_driver(xhci_renesas_pci_driver);
+
+MODULE_DESCRIPTION("Renesas xHCI PCI Host Controller Driver");
+MODULE_FIRMWARE(RENESAS_FW_NAME);
+MODULE_IMPORT_NS(xhci);
 MODULE_LICENSE("GPL v2");
index dc1e345ab67ea8d71725541be44683f1db349fcc..b5705ed01d83dfab4c0ff674cfbad32ef2b2f58d 100644 (file)
@@ -235,15 +235,6 @@ static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
 static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 {
        struct pci_dev                  *pdev = to_pci_dev(dev);
-       struct xhci_driver_data         *driver_data;
-       const struct pci_device_id      *id;
-
-       id = pci_match_id(to_pci_driver(pdev->dev.driver)->id_table, pdev);
-
-       if (id && id->driver_data) {
-               driver_data = (struct xhci_driver_data *)id->driver_data;
-               xhci->quirks |= driver_data->quirks;
-       }
 
        /* Look for vendor-specific quirks */
        if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
@@ -572,21 +563,13 @@ static int xhci_pci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hd
  * We need to register our own PCI probe function (instead of the USB core's
  * function) in order to create a second roothub under xHCI.
  */
-static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+int xhci_pci_common_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
        int retval;
        struct xhci_hcd *xhci;
        struct usb_hcd *hcd;
-       struct xhci_driver_data *driver_data;
        struct reset_control *reset;
 
-       driver_data = (struct xhci_driver_data *)id->driver_data;
-       if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) {
-               retval = renesas_xhci_check_request_fw(dev, id);
-               if (retval)
-                       return retval;
-       }
-
        reset = devm_reset_control_get_optional_exclusive(&dev->dev, NULL);
        if (IS_ERR(reset))
                return PTR_ERR(reset);
@@ -651,8 +634,24 @@ put_runtime_pm:
        pm_runtime_put_noidle(&dev->dev);
        return retval;
 }
+EXPORT_SYMBOL_NS_GPL(xhci_pci_common_probe, xhci);
+
+static const struct pci_device_id pci_ids_reject[] = {
+       /* handled by xhci-pci-renesas */
+       { PCI_DEVICE(PCI_VENDOR_ID_RENESAS, 0x0014) },
+       { PCI_DEVICE(PCI_VENDOR_ID_RENESAS, 0x0015) },
+       { /* end: all zeroes */ }
+};
+
+static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+       if (pci_match_id(pci_ids_reject, dev))
+               return -ENODEV;
+
+       return xhci_pci_common_probe(dev, id);
+}
 
-static void xhci_pci_remove(struct pci_dev *dev)
+void xhci_pci_remove(struct pci_dev *dev)
 {
        struct xhci_hcd *xhci;
 
@@ -675,6 +674,7 @@ static void xhci_pci_remove(struct pci_dev *dev)
 
        usb_hcd_pci_remove(dev);
 }
+EXPORT_SYMBOL_NS_GPL(xhci_pci_remove, xhci);
 
 /*
  * In some Intel xHCI controllers, in order to get D3 working,
@@ -882,19 +882,8 @@ static void xhci_pci_shutdown(struct usb_hcd *hcd)
 
 /*-------------------------------------------------------------------------*/
 
-static const struct xhci_driver_data reneses_data = {
-       .quirks  = XHCI_RENESAS_FW_QUIRK,
-       .firmware = "renesas_usb_fw.mem",
-};
-
 /* PCI driver selection metadata; PCI hotplugging uses this */
 static const struct pci_device_id pci_ids[] = {
-       { PCI_DEVICE(PCI_VENDOR_ID_RENESAS, 0x0014),
-               .driver_data =  (unsigned long)&reneses_data,
-       },
-       { PCI_DEVICE(PCI_VENDOR_ID_RENESAS, 0x0015),
-               .driver_data =  (unsigned long)&reneses_data,
-       },
        /* handle any USB 3.0 xHCI controller */
        { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
        },
@@ -902,14 +891,6 @@ static const struct pci_device_id pci_ids[] = {
 };
 MODULE_DEVICE_TABLE(pci, pci_ids);
 
-/*
- * Without CONFIG_USB_XHCI_PCI_RENESAS renesas_xhci_check_request_fw() won't
- * load firmware, so don't encumber the xhci-pci driver with it.
- */
-#if IS_ENABLED(CONFIG_USB_XHCI_PCI_RENESAS)
-MODULE_FIRMWARE("renesas_usb_fw.mem");
-#endif
-
 /* pci driver glue; this is a "new style" PCI driver module */
 static struct pci_driver xhci_pci_driver = {
        .name =         hcd_name,
index cb9a8f331a44636f11dcbf55f40c5c7cf0368b8f..e87c7d9d76b8e28573893e76eb09041ed3525e17 100644 (file)
@@ -4,22 +4,7 @@
 #ifndef XHCI_PCI_H
 #define XHCI_PCI_H
 
-#if IS_ENABLED(CONFIG_USB_XHCI_PCI_RENESAS)
-int renesas_xhci_check_request_fw(struct pci_dev *dev,
-                                 const struct pci_device_id *id);
-
-#else
-static int renesas_xhci_check_request_fw(struct pci_dev *dev,
-                                        const struct pci_device_id *id)
-{
-       return 0;
-}
-
-#endif
-
-struct xhci_driver_data {
-       u64 quirks;
-       const char *firmware;
-};
+int xhci_pci_common_probe(struct pci_dev *dev, const struct pci_device_id *id);
+void xhci_pci_remove(struct pci_dev *dev);
 
 #endif
index ebd0afd59a60be205f692de03029bcfe6969c86c..df2c81db21a13445b1268fe5445bcae51b850b8f 100644 (file)
@@ -1616,7 +1616,7 @@ struct xhci_hcd {
 #define XHCI_DEFAULT_PM_RUNTIME_ALLOW  BIT_ULL(33)
 #define XHCI_RESET_PLL_ON_DISCONNECT   BIT_ULL(34)
 #define XHCI_SNPS_BROKEN_SUSPEND    BIT_ULL(35)
-#define XHCI_RENESAS_FW_QUIRK  BIT_ULL(36)
+/* Reserved. It was XHCI_RENESAS_FW_QUIRK */
 #define XHCI_SKIP_PHY_INIT     BIT_ULL(37)
 #define XHCI_DISABLE_SPARSE    BIT_ULL(38)
 #define XHCI_SG_TRB_CACHE_SIZE_QUIRK   BIT_ULL(39)