Driver always naively assumes, that for PTP purposes, PHY lane to
configure is corresponding to PF ID.
This is not true for some port configurations, e.g.:
- 2x50G per quad, where lanes used are 0 and 2 on each quad, but PF IDs
are 0 and 1
- 100G per quad on 2 quads, where lanes used are 0 and 4, but PF IDs are
0 and 1
Use correct PHY lane assignment by getting and parsing port options.
This is read from the NVM by the FW and provided to the driver with
the indication of active port split.
Remove ice_is_muxed_topo(), which is no longer needed.
Fixes:
4409ea1726cb ("ice: Adjust PTP init for 2x50G E825C devices")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arkadiusz Kubalewski <Arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
#define ICE_AQC_PORT_OPT_MAX_LANE_25G 5
#define ICE_AQC_PORT_OPT_MAX_LANE_50G 6
#define ICE_AQC_PORT_OPT_MAX_LANE_100G 7
+#define ICE_AQC_PORT_OPT_MAX_LANE_200G 8
u8 global_scid[2];
u8 phy_scid[2];
return ice_aq_send_cmd(hw, &desc, NULL, 0, NULL);
}
+/**
+ * ice_get_phy_lane_number - Get PHY lane number for current adapter
+ * @hw: pointer to the hw struct
+ *
+ * Return: PHY lane number on success, negative error code otherwise.
+ */
+int ice_get_phy_lane_number(struct ice_hw *hw)
+{
+ struct ice_aqc_get_port_options_elem *options;
+ unsigned int lport = 0;
+ unsigned int lane;
+ int err;
+
+ options = kcalloc(ICE_AQC_PORT_OPT_MAX, sizeof(*options), GFP_KERNEL);
+ if (!options)
+ return -ENOMEM;
+
+ for (lane = 0; lane < ICE_MAX_PORT_PER_PCI_DEV; lane++) {
+ u8 options_count = ICE_AQC_PORT_OPT_MAX;
+ u8 speed, active_idx, pending_idx;
+ bool active_valid, pending_valid;
+
+ err = ice_aq_get_port_options(hw, options, &options_count, lane,
+ true, &active_idx, &active_valid,
+ &pending_idx, &pending_valid);
+ if (err)
+ goto err;
+
+ if (!active_valid)
+ continue;
+
+ speed = options[active_idx].max_lane_speed;
+ /* If we don't get speed for this lane, it's unoccupied */
+ if (speed > ICE_AQC_PORT_OPT_MAX_LANE_200G)
+ continue;
+
+ if (hw->pf_id == lport) {
+ kfree(options);
+ return lane;
+ }
+
+ lport++;
+ }
+
+ /* PHY lane not found */
+ err = -ENXIO;
+err:
+ kfree(options);
+ return err;
+}
+
/**
* ice_aq_sff_eeprom
* @hw: pointer to the HW struct
int
ice_aq_set_port_option(struct ice_hw *hw, u8 lport, u8 lport_valid,
u8 new_option);
+int ice_get_phy_lane_number(struct ice_hw *hw);
int
ice_aq_sff_eeprom(struct ice_hw *hw, u16 lport, u8 bus_addr,
u16 mem_addr, u8 page, u8 set_page, u8 *data, u8 length,
if (link_up == old_link && link_speed == old_link_speed)
return 0;
- ice_ptp_link_change(pf, pf->hw.pf_id, link_up);
+ ice_ptp_link_change(pf, link_up);
if (ice_is_dcb_active(pf)) {
if (test_bit(ICE_FLAG_DCB_ENA, pf->flags))
ice_print_link_msg(vsi, true);
netif_tx_start_all_queues(vsi->netdev);
netif_carrier_on(vsi->netdev);
- ice_ptp_link_change(pf, pf->hw.pf_id, true);
+ ice_ptp_link_change(pf, true);
}
/* Perform an initial read of the statistics registers now to
if (vsi->netdev) {
vlan_err = ice_vsi_del_vlan_zero(vsi);
- ice_ptp_link_change(vsi->back, vsi->back->hw.pf_id, false);
+ ice_ptp_link_change(vsi->back, false);
netif_carrier_off(vsi->netdev);
netif_tx_disable(vsi->netdev);
}
/**
* ice_ptp_link_change - Reconfigure PTP after link status change
* @pf: Board private structure
- * @port: Port for which the PHY start is set
* @linkup: Link is up or down
*/
-void ice_ptp_link_change(struct ice_pf *pf, u8 port, bool linkup)
+void ice_ptp_link_change(struct ice_pf *pf, bool linkup)
{
struct ice_ptp_port *ptp_port;
struct ice_hw *hw = &pf->hw;
if (pf->ptp.state != ICE_PTP_READY)
return;
- if (WARN_ON_ONCE(port >= hw->ptp.num_lports))
- return;
-
ptp_port = &pf->ptp.port;
- if (ice_is_e825c(hw) && hw->ptp.is_2x50g_muxed_topo)
- port *= 2;
- if (WARN_ON_ONCE(ptp_port->port_num != port))
- return;
/* Update cached link status for this port immediately */
ptp_port->link_up = linkup;
{
struct ice_ptp *ptp = &pf->ptp;
struct ice_hw *hw = &pf->hw;
- int err;
+ int lane_num, err;
ptp->state = ICE_PTP_INITIALIZING;
+ lane_num = ice_get_phy_lane_number(hw);
+ if (lane_num < 0) {
+ err = lane_num;
+ goto err_exit;
+ }
+
+ ptp->port.port_num = (u8)lane_num;
ice_ptp_init_hw(hw);
ice_ptp_init_tx_interrupt_mode(pf);
if (err)
goto err_exit;
- ptp->port.port_num = hw->pf_id;
- if (ice_is_e825c(hw) && hw->ptp.is_2x50g_muxed_topo)
- ptp->port.port_num = hw->pf_id * 2;
-
err = ice_ptp_init_port(pf, &ptp->port);
if (err)
goto err_exit;
enum ice_reset_req reset_type);
void ice_ptp_init(struct ice_pf *pf);
void ice_ptp_release(struct ice_pf *pf);
-void ice_ptp_link_change(struct ice_pf *pf, u8 port, bool linkup);
+void ice_ptp_link_change(struct ice_pf *pf, bool linkup);
#else /* IS_ENABLED(CONFIG_PTP_1588_CLOCK) */
static inline int ice_ptp_set_ts_config(struct ice_pf *pf, struct ifreq *ifr)
{
}
static inline void ice_ptp_init(struct ice_pf *pf) { }
static inline void ice_ptp_release(struct ice_pf *pf) { }
-static inline void ice_ptp_link_change(struct ice_pf *pf, u8 port, bool linkup)
+static inline void ice_ptp_link_change(struct ice_pf *pf, bool linkup)
{
}
return 0;
}
-/**
- * ice_is_muxed_topo - detect breakout 2x50G topology for E825C
- * @hw: pointer to the HW struct
- *
- * Return: true if it's 2x50 breakout topology, false otherwise
- */
-static bool ice_is_muxed_topo(struct ice_hw *hw)
-{
- u8 link_topo;
- bool mux;
- u32 val;
-
- val = rd32(hw, GLGEN_SWITCH_MODE_CONFIG);
- mux = FIELD_GET(GLGEN_SWITCH_MODE_CONFIG_25X4_QUAD_M, val);
- val = rd32(hw, GLGEN_MAC_LINK_TOPO);
- link_topo = FIELD_GET(GLGEN_MAC_LINK_TOPO_LINK_TOPO_M, val);
-
- return (mux && link_topo == ICE_LINK_TOPO_UP_TO_2_LINKS);
-}
-
/**
* ice_ptp_init_phy_e825 - initialize PHY parameters
* @hw: pointer to the HW struct
ice_sb_access_ena_eth56g(hw, true);
err = ice_read_phy_eth56g(hw, hw->pf_id, PHY_REG_REVISION, &phy_rev);
- if (err || phy_rev != PHY_REVISION_ETH56G) {
+ if (err || phy_rev != PHY_REVISION_ETH56G)
ptp->phy_model = ICE_PHY_UNSUP;
- return;
- }
-
- ptp->is_2x50g_muxed_topo = ice_is_muxed_topo(hw);
}
/* E822 family functions
union ice_phy_params phy;
u8 num_lports;
u8 ports_per_phy;
- bool is_2x50g_muxed_topo;
};
/* Port hardware description */