#include <linux/irqchip/chained_irq.h>
#include <linux/irqdomain.h>
#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/msi.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
#include <linux/reset.h>
#include "../pci.h"
static int mtk_pcie_en7581_power_up(struct mtk_gen3_pcie *pcie)
{
+ struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie);
struct device *dev = pcie->dev;
+ struct resource_entry *entry;
+ struct regmap *pbus_regmap;
+ u32 val, args[2], size;
+ resource_size_t addr;
int err;
- u32 val;
/*
* The controller may have been left out of reset by the bootloader
/* Wait for the time needed to complete the reset lines assert. */
msleep(PCIE_EN7581_RESET_TIME_MS);
+ /*
+ * Configure PBus base address and base address mask to allow the
+ * hw to detect if a given address is accessible on PCIe controller.
+ */
+ pbus_regmap = syscon_regmap_lookup_by_phandle_args(dev->of_node,
+ "mediatek,pbus-csr",
+ ARRAY_SIZE(args),
+ args);
+ if (IS_ERR(pbus_regmap))
+ return PTR_ERR(pbus_regmap);
+
+ entry = resource_list_first_type(&host->windows, IORESOURCE_MEM);
+ if (!entry)
+ return -ENODEV;
+
+ addr = entry->res->start - entry->offset;
+ regmap_write(pbus_regmap, args[0], lower_32_bits(addr));
+ size = lower_32_bits(resource_size(entry->res));
+ regmap_write(pbus_regmap, args[1], GENMASK(31, __fls(size)));
+
/*
* Unlike the other MediaTek Gen3 controllers, the Airoha EN7581
* requires PHY initialization and power-on before PHY reset deassert.