+++ /dev/null
-* Serial NOR flash controller for MediaTek SoCs
-
-Required properties:
-- compatible: For mt8173, compatible should be "mediatek,mt8173-nor",
- and it's the fallback compatible for other Soc.
- For every other SoC, should contain both the SoC-specific compatible
- string and "mediatek,mt8173-nor".
- The possible values are:
- "mediatek,mt2701-nor", "mediatek,mt8173-nor"
- "mediatek,mt2712-nor", "mediatek,mt8173-nor"
- "mediatek,mt7622-nor", "mediatek,mt8173-nor"
- "mediatek,mt7623-nor", "mediatek,mt8173-nor"
- "mediatek,mt7629-nor", "mediatek,mt8173-nor"
- "mediatek,mt8173-nor"
-- reg: physical base address and length of the controller's register
-- clocks: the phandle of the clocks needed by the nor controller
-- clock-names: the names of the clocks
- the clocks should be named "spi" and "sf". "spi" is used for spi bus,
- and "sf" is used for controller, these are the clocks witch
- hardware needs to enabling nor flash and nor flash controller.
- See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
-- #address-cells: should be <1>
-- #size-cells: should be <0>
-
-The SPI flash must be a child of the nor_flash node and must have a
-compatible property. Also see jedec,spi-nor.txt.
-
-Required properties:
-- compatible: May include a device-specific string consisting of the manufacturer
- and name of the chip. Must also include "jedec,spi-nor" for any
- SPI NOR flash that can be identified by the JEDEC READ ID opcode (0x9F).
-- reg : Chip-Select number
-
-Example:
-
-nor_flash: spi@1100d000 {
- compatible = "mediatek,mt8173-nor";
- reg = <0 0x1100d000 0 0xe0>;
- clocks = <&pericfg CLK_PERI_SPI>,
- <&topckgen CLK_TOP_SPINFI_IFR_SEL>;
- clock-names = "spi", "sf";
- #address-cells = <1>;
- #size-cells = <0>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- };
-};
-
--- /dev/null
+* Serial NOR flash controller for MediaTek ARM SoCs
+
+Required properties:
+- compatible: For mt8173, compatible should be "mediatek,mt8173-nor",
+ and it's the fallback compatible for other Soc.
+ For every other SoC, should contain both the SoC-specific compatible
+ string and "mediatek,mt8173-nor".
+ The possible values are:
+ "mediatek,mt2701-nor", "mediatek,mt8173-nor"
+ "mediatek,mt2712-nor", "mediatek,mt8173-nor"
+ "mediatek,mt7622-nor", "mediatek,mt8173-nor"
+ "mediatek,mt7623-nor", "mediatek,mt8173-nor"
+ "mediatek,mt7629-nor", "mediatek,mt8173-nor"
+ "mediatek,mt8173-nor"
+- reg: physical base address and length of the controller's register
+- interrupts: Interrupt number used by the controller.
+- clocks: the phandle of the clocks needed by the nor controller
+- clock-names: the names of the clocks
+ the clocks should be named "spi" and "sf". "spi" is used for spi bus,
+ and "sf" is used for controller, these are the clocks witch
+ hardware needs to enabling nor flash and nor flash controller.
+ See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- #address-cells: should be <1>
+- #size-cells: should be <0>
+
+There should be only one spi slave device following generic spi bindings.
+It's not recommended to use this controller for devices other than SPI NOR
+flash due to limited transfer capability of this controller.
+
+Example:
+
+nor_flash: spi@1100d000 {
+ compatible = "mediatek,mt8173-nor";
+ reg = <0 0x1100d000 0 0xe0>;
+ interrupts = <&spi_flash_irq>;
+ clocks = <&pericfg CLK_PERI_SPI>,
+ <&topckgen CLK_TOP_SPINFI_IFR_SEL>;
+ clock-names = "spi", "sf";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ };
+};
+
F: arch/arm/boot/dts/lpc43*
F: drivers/i2c/busses/i2c-lpc2k.c
F: drivers/memory/pl172.c
-F: drivers/mtd/spi-nor/nxp-spifi.c
+F: drivers/mtd/spi-nor/controllers/nxp-spifi.c
F: drivers/rtc/rtc-lpc24xx.c
N: lpc18xx
Please note that some tools/drivers/filesystems may not work with
4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum).
-config SPI_ASPEED_SMC
- tristate "Aspeed flash controllers in SPI mode"
- depends on ARCH_ASPEED || COMPILE_TEST
- depends on HAS_IOMEM && OF
- help
- This enables support for the Firmware Memory controller (FMC)
- in the Aspeed AST2500/AST2400 SoCs when attached to SPI NOR chips,
- and support for the SPI flash memory controller (SPI) for
- the host firmware. The implementation only supports SPI NOR.
-
-config SPI_CADENCE_QUADSPI
- tristate "Cadence Quad SPI controller"
- depends on OF && (ARM || ARM64 || COMPILE_TEST)
- help
- Enable support for the Cadence Quad SPI Flash controller.
-
- Cadence QSPI is a specialized controller for connecting an SPI
- Flash over 1/2/4-bit wide bus. Enable this option if you have a
- device with a Cadence QSPI controller and want to access the
- Flash as an MTD device.
-
-config SPI_HISI_SFC
- tristate "Hisilicon FMC SPI-NOR Flash Controller(SFC)"
- depends on ARCH_HISI || COMPILE_TEST
- depends on HAS_IOMEM
- help
- This enables support for HiSilicon FMC SPI-NOR flash controller.
-
-config SPI_MTK_QUADSPI
- tristate "MediaTek Quad SPI controller"
- depends on HAS_IOMEM
- help
- This enables support for the Quad SPI controller in master mode.
- This controller does not support generic SPI. It only supports
- SPI NOR.
-
-config SPI_NXP_SPIFI
- tristate "NXP SPI Flash Interface (SPIFI)"
- depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
- depends on HAS_IOMEM
- help
- Enable support for the NXP LPC SPI Flash Interface controller.
-
- SPIFI is a specialized controller for connecting serial SPI
- Flash. Enable this option if you have a device with a SPIFI
- controller and want to access the Flash as a mtd device.
-
-config SPI_INTEL_SPI
- tristate
-
-config SPI_INTEL_SPI_PCI
- tristate "Intel PCH/PCU SPI flash PCI driver (DANGEROUS)"
- depends on X86 && PCI
- select SPI_INTEL_SPI
- help
- This enables PCI support for the Intel PCH/PCU SPI controller in
- master mode. This controller is present in modern Intel hardware
- and is used to hold BIOS and other persistent settings. Using
- this driver it is possible to upgrade BIOS directly from Linux.
-
- Say N here unless you know what you are doing. Overwriting the
- SPI flash may render the system unbootable.
-
- To compile this driver as a module, choose M here: the module
- will be called intel-spi-pci.
-
-config SPI_INTEL_SPI_PLATFORM
- tristate "Intel PCH/PCU SPI flash platform driver (DANGEROUS)"
- depends on X86
- select SPI_INTEL_SPI
- help
- This enables platform support for the Intel PCH/PCU SPI
- controller in master mode. This controller is present in modern
- Intel hardware and is used to hold BIOS and other persistent
- settings. Using this driver it is possible to upgrade BIOS
- directly from Linux.
-
- Say N here unless you know what you are doing. Overwriting the
- SPI flash may render the system unbootable.
-
- To compile this driver as a module, choose M here: the module
- will be called intel-spi-platform.
+source "drivers/mtd/spi-nor/controllers/Kconfig"
endif # MTD_SPI_NOR
# SPDX-License-Identifier: GPL-2.0
+
+spi-nor-objs := core.o sfdp.o
+spi-nor-objs += atmel.o
+spi-nor-objs += catalyst.o
+spi-nor-objs += eon.o
+spi-nor-objs += esmt.o
+spi-nor-objs += everspin.o
+spi-nor-objs += fujitsu.o
+spi-nor-objs += gigadevice.o
+spi-nor-objs += intel.o
+spi-nor-objs += issi.o
+spi-nor-objs += macronix.o
+spi-nor-objs += micron-st.o
+spi-nor-objs += spansion.o
+spi-nor-objs += sst.o
+spi-nor-objs += winbond.o
+spi-nor-objs += xilinx.o
+spi-nor-objs += xmc.o
obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o
-obj-$(CONFIG_SPI_ASPEED_SMC) += aspeed-smc.o
-obj-$(CONFIG_SPI_CADENCE_QUADSPI) += cadence-quadspi.o
-obj-$(CONFIG_SPI_HISI_SFC) += hisi-sfc.o
-obj-$(CONFIG_SPI_MTK_QUADSPI) += mtk-quadspi.o
-obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o
-obj-$(CONFIG_SPI_INTEL_SPI) += intel-spi.o
-obj-$(CONFIG_SPI_INTEL_SPI_PCI) += intel-spi-pci.o
-obj-$(CONFIG_SPI_INTEL_SPI_PLATFORM) += intel-spi-platform.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * ASPEED Static Memory Controller driver
- *
- * Copyright (c) 2015-2016, IBM Corporation.
- */
-
-#include <linux/bug.h>
-#include <linux/device.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/spi-nor.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-#include <linux/sizes.h>
-#include <linux/sysfs.h>
-
-#define DEVICE_NAME "aspeed-smc"
-
-/*
- * The driver only support SPI flash
- */
-enum aspeed_smc_flash_type {
- smc_type_nor = 0,
- smc_type_nand = 1,
- smc_type_spi = 2,
-};
-
-struct aspeed_smc_chip;
-
-struct aspeed_smc_info {
- u32 maxsize; /* maximum size of chip window */
- u8 nce; /* number of chip enables */
- bool hastype; /* flash type field exists in config reg */
- u8 we0; /* shift for write enable bit for CE0 */
- u8 ctl0; /* offset in regs of ctl for CE0 */
-
- void (*set_4b)(struct aspeed_smc_chip *chip);
-};
-
-static void aspeed_smc_chip_set_4b_spi_2400(struct aspeed_smc_chip *chip);
-static void aspeed_smc_chip_set_4b(struct aspeed_smc_chip *chip);
-
-static const struct aspeed_smc_info fmc_2400_info = {
- .maxsize = 64 * 1024 * 1024,
- .nce = 5,
- .hastype = true,
- .we0 = 16,
- .ctl0 = 0x10,
- .set_4b = aspeed_smc_chip_set_4b,
-};
-
-static const struct aspeed_smc_info spi_2400_info = {
- .maxsize = 64 * 1024 * 1024,
- .nce = 1,
- .hastype = false,
- .we0 = 0,
- .ctl0 = 0x04,
- .set_4b = aspeed_smc_chip_set_4b_spi_2400,
-};
-
-static const struct aspeed_smc_info fmc_2500_info = {
- .maxsize = 256 * 1024 * 1024,
- .nce = 3,
- .hastype = true,
- .we0 = 16,
- .ctl0 = 0x10,
- .set_4b = aspeed_smc_chip_set_4b,
-};
-
-static const struct aspeed_smc_info spi_2500_info = {
- .maxsize = 128 * 1024 * 1024,
- .nce = 2,
- .hastype = false,
- .we0 = 16,
- .ctl0 = 0x10,
- .set_4b = aspeed_smc_chip_set_4b,
-};
-
-enum aspeed_smc_ctl_reg_value {
- smc_base, /* base value without mode for other commands */
- smc_read, /* command reg for (maybe fast) reads */
- smc_write, /* command reg for writes */
- smc_max,
-};
-
-struct aspeed_smc_controller;
-
-struct aspeed_smc_chip {
- int cs;
- struct aspeed_smc_controller *controller;
- void __iomem *ctl; /* control register */
- void __iomem *ahb_base; /* base of chip window */
- u32 ahb_window_size; /* chip mapping window size */
- u32 ctl_val[smc_max]; /* control settings */
- enum aspeed_smc_flash_type type; /* what type of flash */
- struct spi_nor nor;
-};
-
-struct aspeed_smc_controller {
- struct device *dev;
-
- struct mutex mutex; /* controller access mutex */
- const struct aspeed_smc_info *info; /* type info of controller */
- void __iomem *regs; /* controller registers */
- void __iomem *ahb_base; /* per-chip windows resource */
- u32 ahb_window_size; /* full mapping window size */
-
- struct aspeed_smc_chip *chips[0]; /* pointers to attached chips */
-};
-
-/*
- * SPI Flash Configuration Register (AST2500 SPI)
- * or
- * Type setting Register (AST2500 FMC).
- * CE0 and CE1 can only be of type SPI. CE2 can be of type NOR but the
- * driver does not support it.
- */
-#define CONFIG_REG 0x0
-#define CONFIG_DISABLE_LEGACY BIT(31) /* 1 */
-
-#define CONFIG_CE2_WRITE BIT(18)
-#define CONFIG_CE1_WRITE BIT(17)
-#define CONFIG_CE0_WRITE BIT(16)
-
-#define CONFIG_CE2_TYPE BIT(4) /* AST2500 FMC only */
-#define CONFIG_CE1_TYPE BIT(2) /* AST2500 FMC only */
-#define CONFIG_CE0_TYPE BIT(0) /* AST2500 FMC only */
-
-/*
- * CE Control Register
- */
-#define CE_CONTROL_REG 0x4
-
-/*
- * CEx Control Register
- */
-#define CONTROL_AAF_MODE BIT(31)
-#define CONTROL_IO_MODE_MASK GENMASK(30, 28)
-#define CONTROL_IO_DUAL_DATA BIT(29)
-#define CONTROL_IO_DUAL_ADDR_DATA (BIT(29) | BIT(28))
-#define CONTROL_IO_QUAD_DATA BIT(30)
-#define CONTROL_IO_QUAD_ADDR_DATA (BIT(30) | BIT(28))
-#define CONTROL_CE_INACTIVE_SHIFT 24
-#define CONTROL_CE_INACTIVE_MASK GENMASK(27, \
- CONTROL_CE_INACTIVE_SHIFT)
-/* 0 = 16T ... 15 = 1T T=HCLK */
-#define CONTROL_COMMAND_SHIFT 16
-#define CONTROL_DUMMY_COMMAND_OUT BIT(15)
-#define CONTROL_IO_DUMMY_HI BIT(14)
-#define CONTROL_IO_DUMMY_HI_SHIFT 14
-#define CONTROL_CLK_DIV4 BIT(13) /* others */
-#define CONTROL_IO_ADDRESS_4B BIT(13) /* AST2400 SPI */
-#define CONTROL_RW_MERGE BIT(12)
-#define CONTROL_IO_DUMMY_LO_SHIFT 6
-#define CONTROL_IO_DUMMY_LO GENMASK(7, \
- CONTROL_IO_DUMMY_LO_SHIFT)
-#define CONTROL_IO_DUMMY_MASK (CONTROL_IO_DUMMY_HI | \
- CONTROL_IO_DUMMY_LO)
-#define CONTROL_IO_DUMMY_SET(dummy) \
- (((((dummy) >> 2) & 0x1) << CONTROL_IO_DUMMY_HI_SHIFT) | \
- (((dummy) & 0x3) << CONTROL_IO_DUMMY_LO_SHIFT))
-
-#define CONTROL_CLOCK_FREQ_SEL_SHIFT 8
-#define CONTROL_CLOCK_FREQ_SEL_MASK GENMASK(11, \
- CONTROL_CLOCK_FREQ_SEL_SHIFT)
-#define CONTROL_LSB_FIRST BIT(5)
-#define CONTROL_CLOCK_MODE_3 BIT(4)
-#define CONTROL_IN_DUAL_DATA BIT(3)
-#define CONTROL_CE_STOP_ACTIVE_CONTROL BIT(2)
-#define CONTROL_COMMAND_MODE_MASK GENMASK(1, 0)
-#define CONTROL_COMMAND_MODE_NORMAL 0
-#define CONTROL_COMMAND_MODE_FREAD 1
-#define CONTROL_COMMAND_MODE_WRITE 2
-#define CONTROL_COMMAND_MODE_USER 3
-
-#define CONTROL_KEEP_MASK \
- (CONTROL_AAF_MODE | CONTROL_CE_INACTIVE_MASK | CONTROL_CLK_DIV4 | \
- CONTROL_CLOCK_FREQ_SEL_MASK | CONTROL_LSB_FIRST | CONTROL_CLOCK_MODE_3)
-
-/*
- * The Segment Register uses a 8MB unit to encode the start address
- * and the end address of the mapping window of a flash SPI slave :
- *
- * | byte 1 | byte 2 | byte 3 | byte 4 |
- * +--------+--------+--------+--------+
- * | end | start | 0 | 0 |
- */
-#define SEGMENT_ADDR_REG0 0x30
-#define SEGMENT_ADDR_START(_r) ((((_r) >> 16) & 0xFF) << 23)
-#define SEGMENT_ADDR_END(_r) ((((_r) >> 24) & 0xFF) << 23)
-#define SEGMENT_ADDR_VALUE(start, end) \
- (((((start) >> 23) & 0xFF) << 16) | ((((end) >> 23) & 0xFF) << 24))
-#define SEGMENT_ADDR_REG(controller, cs) \
- ((controller)->regs + SEGMENT_ADDR_REG0 + (cs) * 4)
-
-/*
- * In user mode all data bytes read or written to the chip decode address
- * range are transferred to or from the SPI bus. The range is treated as a
- * fifo of arbitratry 1, 2, or 4 byte width but each write has to be aligned
- * to its size. The address within the multiple 8kB range is ignored when
- * sending bytes to the SPI bus.
- *
- * On the arm architecture, as of Linux version 4.3, memcpy_fromio and
- * memcpy_toio on little endian targets use the optimized memcpy routines
- * that were designed for well behavied memory storage. These routines
- * have a stutter if the source and destination are not both word aligned,
- * once with a duplicate access to the source after aligning to the
- * destination to a word boundary, and again with a duplicate access to
- * the source when the final byte count is not word aligned.
- *
- * When writing or reading the fifo this stutter discards data or sends
- * too much data to the fifo and can not be used by this driver.
- *
- * While the low level io string routines that implement the insl family do
- * the desired accesses and memory increments, the cross architecture io
- * macros make them essentially impossible to use on a memory mapped address
- * instead of a a token from the call to iomap of an io port.
- *
- * These fifo routines use readl and friends to a constant io port and update
- * the memory buffer pointer and count via explicit code. The final updates
- * to len are optimistically suppressed.
- */
-static int aspeed_smc_read_from_ahb(void *buf, void __iomem *src, size_t len)
-{
- size_t offset = 0;
-
- if (IS_ALIGNED((uintptr_t)src, sizeof(uintptr_t)) &&
- IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) {
- ioread32_rep(src, buf, len >> 2);
- offset = len & ~0x3;
- len -= offset;
- }
- ioread8_rep(src, (u8 *)buf + offset, len);
- return 0;
-}
-
-static int aspeed_smc_write_to_ahb(void __iomem *dst, const void *buf,
- size_t len)
-{
- size_t offset = 0;
-
- if (IS_ALIGNED((uintptr_t)dst, sizeof(uintptr_t)) &&
- IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) {
- iowrite32_rep(dst, buf, len >> 2);
- offset = len & ~0x3;
- len -= offset;
- }
- iowrite8_rep(dst, (const u8 *)buf + offset, len);
- return 0;
-}
-
-static inline u32 aspeed_smc_chip_write_bit(struct aspeed_smc_chip *chip)
-{
- return BIT(chip->controller->info->we0 + chip->cs);
-}
-
-static void aspeed_smc_chip_check_config(struct aspeed_smc_chip *chip)
-{
- struct aspeed_smc_controller *controller = chip->controller;
- u32 reg;
-
- reg = readl(controller->regs + CONFIG_REG);
-
- if (reg & aspeed_smc_chip_write_bit(chip))
- return;
-
- dev_dbg(controller->dev, "config write is not set ! @%p: 0x%08x\n",
- controller->regs + CONFIG_REG, reg);
- reg |= aspeed_smc_chip_write_bit(chip);
- writel(reg, controller->regs + CONFIG_REG);
-}
-
-static void aspeed_smc_start_user(struct spi_nor *nor)
-{
- struct aspeed_smc_chip *chip = nor->priv;
- u32 ctl = chip->ctl_val[smc_base];
-
- /*
- * When the chip is controlled in user mode, we need write
- * access to send the opcodes to it. So check the config.
- */
- aspeed_smc_chip_check_config(chip);
-
- ctl |= CONTROL_COMMAND_MODE_USER |
- CONTROL_CE_STOP_ACTIVE_CONTROL;
- writel(ctl, chip->ctl);
-
- ctl &= ~CONTROL_CE_STOP_ACTIVE_CONTROL;
- writel(ctl, chip->ctl);
-}
-
-static void aspeed_smc_stop_user(struct spi_nor *nor)
-{
- struct aspeed_smc_chip *chip = nor->priv;
-
- u32 ctl = chip->ctl_val[smc_read];
- u32 ctl2 = ctl | CONTROL_COMMAND_MODE_USER |
- CONTROL_CE_STOP_ACTIVE_CONTROL;
-
- writel(ctl2, chip->ctl); /* stop user CE control */
- writel(ctl, chip->ctl); /* default to fread or read mode */
-}
-
-static int aspeed_smc_prep(struct spi_nor *nor)
-{
- struct aspeed_smc_chip *chip = nor->priv;
-
- mutex_lock(&chip->controller->mutex);
- return 0;
-}
-
-static void aspeed_smc_unprep(struct spi_nor *nor)
-{
- struct aspeed_smc_chip *chip = nor->priv;
-
- mutex_unlock(&chip->controller->mutex);
-}
-
-static int aspeed_smc_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
- size_t len)
-{
- struct aspeed_smc_chip *chip = nor->priv;
-
- aspeed_smc_start_user(nor);
- aspeed_smc_write_to_ahb(chip->ahb_base, &opcode, 1);
- aspeed_smc_read_from_ahb(buf, chip->ahb_base, len);
- aspeed_smc_stop_user(nor);
- return 0;
-}
-
-static int aspeed_smc_write_reg(struct spi_nor *nor, u8 opcode, const u8 *buf,
- size_t len)
-{
- struct aspeed_smc_chip *chip = nor->priv;
-
- aspeed_smc_start_user(nor);
- aspeed_smc_write_to_ahb(chip->ahb_base, &opcode, 1);
- aspeed_smc_write_to_ahb(chip->ahb_base, buf, len);
- aspeed_smc_stop_user(nor);
- return 0;
-}
-
-static void aspeed_smc_send_cmd_addr(struct spi_nor *nor, u8 cmd, u32 addr)
-{
- struct aspeed_smc_chip *chip = nor->priv;
- __be32 temp;
- u32 cmdaddr;
-
- switch (nor->addr_width) {
- default:
- WARN_ONCE(1, "Unexpected address width %u, defaulting to 3\n",
- nor->addr_width);
- /* FALLTHROUGH */
- case 3:
- cmdaddr = addr & 0xFFFFFF;
- cmdaddr |= cmd << 24;
-
- temp = cpu_to_be32(cmdaddr);
- aspeed_smc_write_to_ahb(chip->ahb_base, &temp, 4);
- break;
- case 4:
- temp = cpu_to_be32(addr);
- aspeed_smc_write_to_ahb(chip->ahb_base, &cmd, 1);
- aspeed_smc_write_to_ahb(chip->ahb_base, &temp, 4);
- break;
- }
-}
-
-static ssize_t aspeed_smc_read_user(struct spi_nor *nor, loff_t from,
- size_t len, u_char *read_buf)
-{
- struct aspeed_smc_chip *chip = nor->priv;
- int i;
- u8 dummy = 0xFF;
-
- aspeed_smc_start_user(nor);
- aspeed_smc_send_cmd_addr(nor, nor->read_opcode, from);
- for (i = 0; i < chip->nor.read_dummy / 8; i++)
- aspeed_smc_write_to_ahb(chip->ahb_base, &dummy, sizeof(dummy));
-
- aspeed_smc_read_from_ahb(read_buf, chip->ahb_base, len);
- aspeed_smc_stop_user(nor);
- return len;
-}
-
-static ssize_t aspeed_smc_write_user(struct spi_nor *nor, loff_t to,
- size_t len, const u_char *write_buf)
-{
- struct aspeed_smc_chip *chip = nor->priv;
-
- aspeed_smc_start_user(nor);
- aspeed_smc_send_cmd_addr(nor, nor->program_opcode, to);
- aspeed_smc_write_to_ahb(chip->ahb_base, write_buf, len);
- aspeed_smc_stop_user(nor);
- return len;
-}
-
-static int aspeed_smc_unregister(struct aspeed_smc_controller *controller)
-{
- struct aspeed_smc_chip *chip;
- int n;
-
- for (n = 0; n < controller->info->nce; n++) {
- chip = controller->chips[n];
- if (chip)
- mtd_device_unregister(&chip->nor.mtd);
- }
-
- return 0;
-}
-
-static int aspeed_smc_remove(struct platform_device *dev)
-{
- return aspeed_smc_unregister(platform_get_drvdata(dev));
-}
-
-static const struct of_device_id aspeed_smc_matches[] = {
- { .compatible = "aspeed,ast2400-fmc", .data = &fmc_2400_info },
- { .compatible = "aspeed,ast2400-spi", .data = &spi_2400_info },
- { .compatible = "aspeed,ast2500-fmc", .data = &fmc_2500_info },
- { .compatible = "aspeed,ast2500-spi", .data = &spi_2500_info },
- { }
-};
-MODULE_DEVICE_TABLE(of, aspeed_smc_matches);
-
-/*
- * Each chip has a mapping window defined by a segment address
- * register defining a start and an end address on the AHB bus. These
- * addresses can be configured to fit the chip size and offer a
- * contiguous memory region across chips. For the moment, we only
- * check that each chip segment is valid.
- */
-static void __iomem *aspeed_smc_chip_base(struct aspeed_smc_chip *chip,
- struct resource *res)
-{
- struct aspeed_smc_controller *controller = chip->controller;
- u32 offset = 0;
- u32 reg;
-
- if (controller->info->nce > 1) {
- reg = readl(SEGMENT_ADDR_REG(controller, chip->cs));
-
- if (SEGMENT_ADDR_START(reg) >= SEGMENT_ADDR_END(reg))
- return NULL;
-
- offset = SEGMENT_ADDR_START(reg) - res->start;
- }
-
- return controller->ahb_base + offset;
-}
-
-static u32 aspeed_smc_ahb_base_phy(struct aspeed_smc_controller *controller)
-{
- u32 seg0_val = readl(SEGMENT_ADDR_REG(controller, 0));
-
- return SEGMENT_ADDR_START(seg0_val);
-}
-
-static u32 chip_set_segment(struct aspeed_smc_chip *chip, u32 cs, u32 start,
- u32 size)
-{
- struct aspeed_smc_controller *controller = chip->controller;
- void __iomem *seg_reg;
- u32 seg_oldval, seg_newval, ahb_base_phy, end;
-
- ahb_base_phy = aspeed_smc_ahb_base_phy(controller);
-
- seg_reg = SEGMENT_ADDR_REG(controller, cs);
- seg_oldval = readl(seg_reg);
-
- /*
- * If the chip size is not specified, use the default segment
- * size, but take into account the possible overlap with the
- * previous segment
- */
- if (!size)
- size = SEGMENT_ADDR_END(seg_oldval) - start;
-
- /*
- * The segment cannot exceed the maximum window size of the
- * controller.
- */
- if (start + size > ahb_base_phy + controller->ahb_window_size) {
- size = ahb_base_phy + controller->ahb_window_size - start;
- dev_warn(chip->nor.dev, "CE%d window resized to %dMB",
- cs, size >> 20);
- }
-
- end = start + size;
- seg_newval = SEGMENT_ADDR_VALUE(start, end);
- writel(seg_newval, seg_reg);
-
- /*
- * Restore default value if something goes wrong. The chip
- * might have set some bogus value and we would loose access
- * to the chip.
- */
- if (seg_newval != readl(seg_reg)) {
- dev_err(chip->nor.dev, "CE%d window invalid", cs);
- writel(seg_oldval, seg_reg);
- start = SEGMENT_ADDR_START(seg_oldval);
- end = SEGMENT_ADDR_END(seg_oldval);
- size = end - start;
- }
-
- dev_info(chip->nor.dev, "CE%d window [ 0x%.8x - 0x%.8x ] %dMB",
- cs, start, end, size >> 20);
-
- return size;
-}
-
-/*
- * The segment register defines the mapping window on the AHB bus and
- * it needs to be configured depending on the chip size. The segment
- * register of the following CE also needs to be tuned in order to
- * provide a contiguous window across multiple chips.
- *
- * This is expected to be called in increasing CE order
- */
-static u32 aspeed_smc_chip_set_segment(struct aspeed_smc_chip *chip)
-{
- struct aspeed_smc_controller *controller = chip->controller;
- u32 ahb_base_phy, start;
- u32 size = chip->nor.mtd.size;
-
- /*
- * Each controller has a chip size limit for direct memory
- * access
- */
- if (size > controller->info->maxsize)
- size = controller->info->maxsize;
-
- /*
- * The AST2400 SPI controller only handles one chip and does
- * not have segment registers. Let's use the chip size for the
- * AHB window.
- */
- if (controller->info == &spi_2400_info)
- goto out;
-
- /*
- * The AST2500 SPI controller has a HW bug when the CE0 chip
- * size reaches 128MB. Enforce a size limit of 120MB to
- * prevent the controller from using bogus settings in the
- * segment register.
- */
- if (chip->cs == 0 && controller->info == &spi_2500_info &&
- size == SZ_128M) {
- size = 120 << 20;
- dev_info(chip->nor.dev,
- "CE%d window resized to %dMB (AST2500 HW quirk)",
- chip->cs, size >> 20);
- }
-
- ahb_base_phy = aspeed_smc_ahb_base_phy(controller);
-
- /*
- * As a start address for the current segment, use the default
- * start address if we are handling CE0 or use the previous
- * segment ending address
- */
- if (chip->cs) {
- u32 prev = readl(SEGMENT_ADDR_REG(controller, chip->cs - 1));
-
- start = SEGMENT_ADDR_END(prev);
- } else {
- start = ahb_base_phy;
- }
-
- size = chip_set_segment(chip, chip->cs, start, size);
-
- /* Update chip base address on the AHB bus */
- chip->ahb_base = controller->ahb_base + (start - ahb_base_phy);
-
- /*
- * Now, make sure the next segment does not overlap with the
- * current one we just configured, even if there is no
- * available chip. That could break access in Command Mode.
- */
- if (chip->cs < controller->info->nce - 1)
- chip_set_segment(chip, chip->cs + 1, start + size, 0);
-
-out:
- if (size < chip->nor.mtd.size)
- dev_warn(chip->nor.dev,
- "CE%d window too small for chip %dMB",
- chip->cs, (u32)chip->nor.mtd.size >> 20);
-
- return size;
-}
-
-static void aspeed_smc_chip_enable_write(struct aspeed_smc_chip *chip)
-{
- struct aspeed_smc_controller *controller = chip->controller;
- u32 reg;
-
- reg = readl(controller->regs + CONFIG_REG);
-
- reg |= aspeed_smc_chip_write_bit(chip);
- writel(reg, controller->regs + CONFIG_REG);
-}
-
-static void aspeed_smc_chip_set_type(struct aspeed_smc_chip *chip, int type)
-{
- struct aspeed_smc_controller *controller = chip->controller;
- u32 reg;
-
- chip->type = type;
-
- reg = readl(controller->regs + CONFIG_REG);
- reg &= ~(3 << (chip->cs * 2));
- reg |= chip->type << (chip->cs * 2);
- writel(reg, controller->regs + CONFIG_REG);
-}
-
-/*
- * The first chip of the AST2500 FMC flash controller is strapped by
- * hardware, or autodetected, but other chips need to be set. Enforce
- * the 4B setting for all chips.
- */
-static void aspeed_smc_chip_set_4b(struct aspeed_smc_chip *chip)
-{
- struct aspeed_smc_controller *controller = chip->controller;
- u32 reg;
-
- reg = readl(controller->regs + CE_CONTROL_REG);
- reg |= 1 << chip->cs;
- writel(reg, controller->regs + CE_CONTROL_REG);
-}
-
-/*
- * The AST2400 SPI flash controller does not have a CE Control
- * register. It uses the CE0 control register to set 4Byte mode at the
- * controller level.
- */
-static void aspeed_smc_chip_set_4b_spi_2400(struct aspeed_smc_chip *chip)
-{
- chip->ctl_val[smc_base] |= CONTROL_IO_ADDRESS_4B;
- chip->ctl_val[smc_read] |= CONTROL_IO_ADDRESS_4B;
-}
-
-static int aspeed_smc_chip_setup_init(struct aspeed_smc_chip *chip,
- struct resource *res)
-{
- struct aspeed_smc_controller *controller = chip->controller;
- const struct aspeed_smc_info *info = controller->info;
- u32 reg, base_reg;
-
- /*
- * Always turn on the write enable bit to allow opcodes to be
- * sent in user mode.
- */
- aspeed_smc_chip_enable_write(chip);
-
- /* The driver only supports SPI type flash */
- if (info->hastype)
- aspeed_smc_chip_set_type(chip, smc_type_spi);
-
- /*
- * Configure chip base address in memory
- */
- chip->ahb_base = aspeed_smc_chip_base(chip, res);
- if (!chip->ahb_base) {
- dev_warn(chip->nor.dev, "CE%d window closed", chip->cs);
- return -EINVAL;
- }
-
- /*
- * Get value of the inherited control register. U-Boot usually
- * does some timing calibration on the FMC chip, so it's good
- * to keep them. In the future, we should handle calibration
- * from Linux.
- */
- reg = readl(chip->ctl);
- dev_dbg(controller->dev, "control register: %08x\n", reg);
-
- base_reg = reg & CONTROL_KEEP_MASK;
- if (base_reg != reg) {
- dev_dbg(controller->dev,
- "control register changed to: %08x\n",
- base_reg);
- }
- chip->ctl_val[smc_base] = base_reg;
-
- /*
- * Retain the prior value of the control register as the
- * default if it was normal access mode. Otherwise start with
- * the sanitized base value set to read mode.
- */
- if ((reg & CONTROL_COMMAND_MODE_MASK) ==
- CONTROL_COMMAND_MODE_NORMAL)
- chip->ctl_val[smc_read] = reg;
- else
- chip->ctl_val[smc_read] = chip->ctl_val[smc_base] |
- CONTROL_COMMAND_MODE_NORMAL;
-
- dev_dbg(controller->dev, "default control register: %08x\n",
- chip->ctl_val[smc_read]);
- return 0;
-}
-
-static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip)
-{
- struct aspeed_smc_controller *controller = chip->controller;
- const struct aspeed_smc_info *info = controller->info;
- u32 cmd;
-
- if (chip->nor.addr_width == 4 && info->set_4b)
- info->set_4b(chip);
-
- /* This is for direct AHB access when using Command Mode. */
- chip->ahb_window_size = aspeed_smc_chip_set_segment(chip);
-
- /*
- * base mode has not been optimized yet. use it for writes.
- */
- chip->ctl_val[smc_write] = chip->ctl_val[smc_base] |
- chip->nor.program_opcode << CONTROL_COMMAND_SHIFT |
- CONTROL_COMMAND_MODE_WRITE;
-
- dev_dbg(controller->dev, "write control register: %08x\n",
- chip->ctl_val[smc_write]);
-
- /*
- * TODO: Adjust clocks if fast read is supported and interpret
- * SPI-NOR flags to adjust controller settings.
- */
- if (chip->nor.read_proto == SNOR_PROTO_1_1_1) {
- if (chip->nor.read_dummy == 0)
- cmd = CONTROL_COMMAND_MODE_NORMAL;
- else
- cmd = CONTROL_COMMAND_MODE_FREAD;
- } else {
- dev_err(chip->nor.dev, "unsupported SPI read mode\n");
- return -EINVAL;
- }
-
- chip->ctl_val[smc_read] |= cmd |
- CONTROL_IO_DUMMY_SET(chip->nor.read_dummy / 8);
-
- dev_dbg(controller->dev, "base control register: %08x\n",
- chip->ctl_val[smc_read]);
- return 0;
-}
-
-static const struct spi_nor_controller_ops aspeed_smc_controller_ops = {
- .prepare = aspeed_smc_prep,
- .unprepare = aspeed_smc_unprep,
- .read_reg = aspeed_smc_read_reg,
- .write_reg = aspeed_smc_write_reg,
- .read = aspeed_smc_read_user,
- .write = aspeed_smc_write_user,
-};
-
-static int aspeed_smc_setup_flash(struct aspeed_smc_controller *controller,
- struct device_node *np, struct resource *r)
-{
- const struct spi_nor_hwcaps hwcaps = {
- .mask = SNOR_HWCAPS_READ |
- SNOR_HWCAPS_READ_FAST |
- SNOR_HWCAPS_PP,
- };
- const struct aspeed_smc_info *info = controller->info;
- struct device *dev = controller->dev;
- struct device_node *child;
- unsigned int cs;
- int ret = -ENODEV;
-
- for_each_available_child_of_node(np, child) {
- struct aspeed_smc_chip *chip;
- struct spi_nor *nor;
- struct mtd_info *mtd;
-
- /* This driver does not support NAND or NOR flash devices. */
- if (!of_device_is_compatible(child, "jedec,spi-nor"))
- continue;
-
- ret = of_property_read_u32(child, "reg", &cs);
- if (ret) {
- dev_err(dev, "Couldn't not read chip select.\n");
- break;
- }
-
- if (cs >= info->nce) {
- dev_err(dev, "Chip select %d out of range.\n",
- cs);
- ret = -ERANGE;
- break;
- }
-
- if (controller->chips[cs]) {
- dev_err(dev, "Chip select %d already in use by %s\n",
- cs, dev_name(controller->chips[cs]->nor.dev));
- ret = -EBUSY;
- break;
- }
-
- chip = devm_kzalloc(controller->dev, sizeof(*chip), GFP_KERNEL);
- if (!chip) {
- ret = -ENOMEM;
- break;
- }
-
- chip->controller = controller;
- chip->ctl = controller->regs + info->ctl0 + cs * 4;
- chip->cs = cs;
-
- nor = &chip->nor;
- mtd = &nor->mtd;
-
- nor->dev = dev;
- nor->priv = chip;
- spi_nor_set_flash_node(nor, child);
- nor->controller_ops = &aspeed_smc_controller_ops;
-
- ret = aspeed_smc_chip_setup_init(chip, r);
- if (ret)
- break;
-
- /*
- * TODO: Add support for Dual and Quad SPI protocols
- * attach when board support is present as determined
- * by of property.
- */
- ret = spi_nor_scan(nor, NULL, &hwcaps);
- if (ret)
- break;
-
- ret = aspeed_smc_chip_setup_finish(chip);
- if (ret)
- break;
-
- ret = mtd_device_register(mtd, NULL, 0);
- if (ret)
- break;
-
- controller->chips[cs] = chip;
- }
-
- if (ret) {
- of_node_put(child);
- aspeed_smc_unregister(controller);
- }
-
- return ret;
-}
-
-static int aspeed_smc_probe(struct platform_device *pdev)
-{
- struct device_node *np = pdev->dev.of_node;
- struct device *dev = &pdev->dev;
- struct aspeed_smc_controller *controller;
- const struct of_device_id *match;
- const struct aspeed_smc_info *info;
- struct resource *res;
- int ret;
-
- match = of_match_device(aspeed_smc_matches, &pdev->dev);
- if (!match || !match->data)
- return -ENODEV;
- info = match->data;
-
- controller = devm_kzalloc(&pdev->dev,
- struct_size(controller, chips, info->nce),
- GFP_KERNEL);
- if (!controller)
- return -ENOMEM;
- controller->info = info;
- controller->dev = dev;
-
- mutex_init(&controller->mutex);
- platform_set_drvdata(pdev, controller);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- controller->regs = devm_ioremap_resource(dev, res);
- if (IS_ERR(controller->regs))
- return PTR_ERR(controller->regs);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- controller->ahb_base = devm_ioremap_resource(dev, res);
- if (IS_ERR(controller->ahb_base))
- return PTR_ERR(controller->ahb_base);
-
- controller->ahb_window_size = resource_size(res);
-
- ret = aspeed_smc_setup_flash(controller, np, res);
- if (ret)
- dev_err(dev, "Aspeed SMC probe failed %d\n", ret);
-
- return ret;
-}
-
-static struct platform_driver aspeed_smc_driver = {
- .probe = aspeed_smc_probe,
- .remove = aspeed_smc_remove,
- .driver = {
- .name = DEVICE_NAME,
- .of_match_table = aspeed_smc_matches,
- }
-};
-
-module_platform_driver(aspeed_smc_driver);
-
-MODULE_DESCRIPTION("ASPEED Static Memory Controller Driver");
-MODULE_AUTHOR("Cedric Le Goater <clg@kaod.org>");
-MODULE_LICENSE("GPL v2");
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info atmel_parts[] = {
+ /* Atmel -- some are (confusingly) marketed as "DataFlash" */
+ { "at25fs010", INFO(0x1f6601, 0, 32 * 1024, 4, SECT_4K) },
+ { "at25fs040", INFO(0x1f6604, 0, 64 * 1024, 8, SECT_4K) },
+
+ { "at25df041a", INFO(0x1f4401, 0, 64 * 1024, 8, SECT_4K) },
+ { "at25df321", INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K) },
+ { "at25df321a", INFO(0x1f4701, 0, 64 * 1024, 64, SECT_4K) },
+ { "at25df641", INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) },
+
+ { "at25sl321", INFO(0x1f4216, 0, 64 * 1024, 64,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+
+ { "at26f004", INFO(0x1f0400, 0, 64 * 1024, 8, SECT_4K) },
+ { "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16, SECT_4K) },
+ { "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) },
+ { "at26df321", INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K) },
+
+ { "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) },
+};
+
+static void atmel_default_init(struct spi_nor *nor)
+{
+ nor->flags |= SNOR_F_HAS_LOCK;
+}
+
+static const struct spi_nor_fixups atmel_fixups = {
+ .default_init = atmel_default_init,
+};
+
+const struct spi_nor_manufacturer spi_nor_atmel = {
+ .name = "atmel",
+ .parts = atmel_parts,
+ .nparts = ARRAY_SIZE(atmel_parts),
+ .fixups = &atmel_fixups,
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Driver for Cadence QSPI Controller
- *
- * Copyright Altera Corporation (C) 2012-2014. All rights reserved.
- */
-#include <linux/clk.h>
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmaengine.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/iopoll.h>
-#include <linux/jiffies.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/spi-nor.h>
-#include <linux/of_device.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
-#include <linux/reset.h>
-#include <linux/sched.h>
-#include <linux/spi/spi.h>
-#include <linux/timer.h>
-
-#define CQSPI_NAME "cadence-qspi"
-#define CQSPI_MAX_CHIPSELECT 16
-
-/* Quirks */
-#define CQSPI_NEEDS_WR_DELAY BIT(0)
-
-/* Capabilities mask */
-#define CQSPI_BASE_HWCAPS_MASK \
- (SNOR_HWCAPS_READ | SNOR_HWCAPS_READ_FAST | \
- SNOR_HWCAPS_READ_1_1_2 | SNOR_HWCAPS_READ_1_1_4 | \
- SNOR_HWCAPS_PP)
-
-struct cqspi_st;
-
-struct cqspi_flash_pdata {
- struct spi_nor nor;
- struct cqspi_st *cqspi;
- u32 clk_rate;
- u32 read_delay;
- u32 tshsl_ns;
- u32 tsd2d_ns;
- u32 tchsh_ns;
- u32 tslch_ns;
- u8 inst_width;
- u8 addr_width;
- u8 data_width;
- u8 cs;
- bool registered;
- bool use_direct_mode;
-};
-
-struct cqspi_st {
- struct platform_device *pdev;
-
- struct clk *clk;
- unsigned int sclk;
-
- void __iomem *iobase;
- void __iomem *ahb_base;
- resource_size_t ahb_size;
- struct completion transfer_complete;
- struct mutex bus_mutex;
-
- struct dma_chan *rx_chan;
- struct completion rx_dma_complete;
- dma_addr_t mmap_phys_base;
-
- int current_cs;
- int current_page_size;
- int current_erase_size;
- int current_addr_width;
- unsigned long master_ref_clk_hz;
- bool is_decoded_cs;
- u32 fifo_depth;
- u32 fifo_width;
- bool rclk_en;
- u32 trigger_address;
- u32 wr_delay;
- struct cqspi_flash_pdata f_pdata[CQSPI_MAX_CHIPSELECT];
-};
-
-struct cqspi_driver_platdata {
- u32 hwcaps_mask;
- u8 quirks;
-};
-
-/* Operation timeout value */
-#define CQSPI_TIMEOUT_MS 500
-#define CQSPI_READ_TIMEOUT_MS 10
-
-/* Instruction type */
-#define CQSPI_INST_TYPE_SINGLE 0
-#define CQSPI_INST_TYPE_DUAL 1
-#define CQSPI_INST_TYPE_QUAD 2
-#define CQSPI_INST_TYPE_OCTAL 3
-
-#define CQSPI_DUMMY_CLKS_PER_BYTE 8
-#define CQSPI_DUMMY_BYTES_MAX 4
-#define CQSPI_DUMMY_CLKS_MAX 31
-
-#define CQSPI_STIG_DATA_LEN_MAX 8
-
-/* Register map */
-#define CQSPI_REG_CONFIG 0x00
-#define CQSPI_REG_CONFIG_ENABLE_MASK BIT(0)
-#define CQSPI_REG_CONFIG_ENB_DIR_ACC_CTRL BIT(7)
-#define CQSPI_REG_CONFIG_DECODE_MASK BIT(9)
-#define CQSPI_REG_CONFIG_CHIPSELECT_LSB 10
-#define CQSPI_REG_CONFIG_DMA_MASK BIT(15)
-#define CQSPI_REG_CONFIG_BAUD_LSB 19
-#define CQSPI_REG_CONFIG_IDLE_LSB 31
-#define CQSPI_REG_CONFIG_CHIPSELECT_MASK 0xF
-#define CQSPI_REG_CONFIG_BAUD_MASK 0xF
-
-#define CQSPI_REG_RD_INSTR 0x04
-#define CQSPI_REG_RD_INSTR_OPCODE_LSB 0
-#define CQSPI_REG_RD_INSTR_TYPE_INSTR_LSB 8
-#define CQSPI_REG_RD_INSTR_TYPE_ADDR_LSB 12
-#define CQSPI_REG_RD_INSTR_TYPE_DATA_LSB 16
-#define CQSPI_REG_RD_INSTR_MODE_EN_LSB 20
-#define CQSPI_REG_RD_INSTR_DUMMY_LSB 24
-#define CQSPI_REG_RD_INSTR_TYPE_INSTR_MASK 0x3
-#define CQSPI_REG_RD_INSTR_TYPE_ADDR_MASK 0x3
-#define CQSPI_REG_RD_INSTR_TYPE_DATA_MASK 0x3
-#define CQSPI_REG_RD_INSTR_DUMMY_MASK 0x1F
-
-#define CQSPI_REG_WR_INSTR 0x08
-#define CQSPI_REG_WR_INSTR_OPCODE_LSB 0
-#define CQSPI_REG_WR_INSTR_TYPE_ADDR_LSB 12
-#define CQSPI_REG_WR_INSTR_TYPE_DATA_LSB 16
-
-#define CQSPI_REG_DELAY 0x0C
-#define CQSPI_REG_DELAY_TSLCH_LSB 0
-#define CQSPI_REG_DELAY_TCHSH_LSB 8
-#define CQSPI_REG_DELAY_TSD2D_LSB 16
-#define CQSPI_REG_DELAY_TSHSL_LSB 24
-#define CQSPI_REG_DELAY_TSLCH_MASK 0xFF
-#define CQSPI_REG_DELAY_TCHSH_MASK 0xFF
-#define CQSPI_REG_DELAY_TSD2D_MASK 0xFF
-#define CQSPI_REG_DELAY_TSHSL_MASK 0xFF
-
-#define CQSPI_REG_READCAPTURE 0x10
-#define CQSPI_REG_READCAPTURE_BYPASS_LSB 0
-#define CQSPI_REG_READCAPTURE_DELAY_LSB 1
-#define CQSPI_REG_READCAPTURE_DELAY_MASK 0xF
-
-#define CQSPI_REG_SIZE 0x14
-#define CQSPI_REG_SIZE_ADDRESS_LSB 0
-#define CQSPI_REG_SIZE_PAGE_LSB 4
-#define CQSPI_REG_SIZE_BLOCK_LSB 16
-#define CQSPI_REG_SIZE_ADDRESS_MASK 0xF
-#define CQSPI_REG_SIZE_PAGE_MASK 0xFFF
-#define CQSPI_REG_SIZE_BLOCK_MASK 0x3F
-
-#define CQSPI_REG_SRAMPARTITION 0x18
-#define CQSPI_REG_INDIRECTTRIGGER 0x1C
-
-#define CQSPI_REG_DMA 0x20
-#define CQSPI_REG_DMA_SINGLE_LSB 0
-#define CQSPI_REG_DMA_BURST_LSB 8
-#define CQSPI_REG_DMA_SINGLE_MASK 0xFF
-#define CQSPI_REG_DMA_BURST_MASK 0xFF
-
-#define CQSPI_REG_REMAP 0x24
-#define CQSPI_REG_MODE_BIT 0x28
-
-#define CQSPI_REG_SDRAMLEVEL 0x2C
-#define CQSPI_REG_SDRAMLEVEL_RD_LSB 0
-#define CQSPI_REG_SDRAMLEVEL_WR_LSB 16
-#define CQSPI_REG_SDRAMLEVEL_RD_MASK 0xFFFF
-#define CQSPI_REG_SDRAMLEVEL_WR_MASK 0xFFFF
-
-#define CQSPI_REG_IRQSTATUS 0x40
-#define CQSPI_REG_IRQMASK 0x44
-
-#define CQSPI_REG_INDIRECTRD 0x60
-#define CQSPI_REG_INDIRECTRD_START_MASK BIT(0)
-#define CQSPI_REG_INDIRECTRD_CANCEL_MASK BIT(1)
-#define CQSPI_REG_INDIRECTRD_DONE_MASK BIT(5)
-
-#define CQSPI_REG_INDIRECTRDWATERMARK 0x64
-#define CQSPI_REG_INDIRECTRDSTARTADDR 0x68
-#define CQSPI_REG_INDIRECTRDBYTES 0x6C
-
-#define CQSPI_REG_CMDCTRL 0x90
-#define CQSPI_REG_CMDCTRL_EXECUTE_MASK BIT(0)
-#define CQSPI_REG_CMDCTRL_INPROGRESS_MASK BIT(1)
-#define CQSPI_REG_CMDCTRL_WR_BYTES_LSB 12
-#define CQSPI_REG_CMDCTRL_WR_EN_LSB 15
-#define CQSPI_REG_CMDCTRL_ADD_BYTES_LSB 16
-#define CQSPI_REG_CMDCTRL_ADDR_EN_LSB 19
-#define CQSPI_REG_CMDCTRL_RD_BYTES_LSB 20
-#define CQSPI_REG_CMDCTRL_RD_EN_LSB 23
-#define CQSPI_REG_CMDCTRL_OPCODE_LSB 24
-#define CQSPI_REG_CMDCTRL_WR_BYTES_MASK 0x7
-#define CQSPI_REG_CMDCTRL_ADD_BYTES_MASK 0x3
-#define CQSPI_REG_CMDCTRL_RD_BYTES_MASK 0x7
-
-#define CQSPI_REG_INDIRECTWR 0x70
-#define CQSPI_REG_INDIRECTWR_START_MASK BIT(0)
-#define CQSPI_REG_INDIRECTWR_CANCEL_MASK BIT(1)
-#define CQSPI_REG_INDIRECTWR_DONE_MASK BIT(5)
-
-#define CQSPI_REG_INDIRECTWRWATERMARK 0x74
-#define CQSPI_REG_INDIRECTWRSTARTADDR 0x78
-#define CQSPI_REG_INDIRECTWRBYTES 0x7C
-
-#define CQSPI_REG_CMDADDRESS 0x94
-#define CQSPI_REG_CMDREADDATALOWER 0xA0
-#define CQSPI_REG_CMDREADDATAUPPER 0xA4
-#define CQSPI_REG_CMDWRITEDATALOWER 0xA8
-#define CQSPI_REG_CMDWRITEDATAUPPER 0xAC
-
-/* Interrupt status bits */
-#define CQSPI_REG_IRQ_MODE_ERR BIT(0)
-#define CQSPI_REG_IRQ_UNDERFLOW BIT(1)
-#define CQSPI_REG_IRQ_IND_COMP BIT(2)
-#define CQSPI_REG_IRQ_IND_RD_REJECT BIT(3)
-#define CQSPI_REG_IRQ_WR_PROTECTED_ERR BIT(4)
-#define CQSPI_REG_IRQ_ILLEGAL_AHB_ERR BIT(5)
-#define CQSPI_REG_IRQ_WATERMARK BIT(6)
-#define CQSPI_REG_IRQ_IND_SRAM_FULL BIT(12)
-
-#define CQSPI_IRQ_MASK_RD (CQSPI_REG_IRQ_WATERMARK | \
- CQSPI_REG_IRQ_IND_SRAM_FULL | \
- CQSPI_REG_IRQ_IND_COMP)
-
-#define CQSPI_IRQ_MASK_WR (CQSPI_REG_IRQ_IND_COMP | \
- CQSPI_REG_IRQ_WATERMARK | \
- CQSPI_REG_IRQ_UNDERFLOW)
-
-#define CQSPI_IRQ_STATUS_MASK 0x1FFFF
-
-static int cqspi_wait_for_bit(void __iomem *reg, const u32 mask, bool clr)
-{
- u32 val;
-
- return readl_relaxed_poll_timeout(reg, val,
- (((clr ? ~val : val) & mask) == mask),
- 10, CQSPI_TIMEOUT_MS * 1000);
-}
-
-static bool cqspi_is_idle(struct cqspi_st *cqspi)
-{
- u32 reg = readl(cqspi->iobase + CQSPI_REG_CONFIG);
-
- return reg & (1 << CQSPI_REG_CONFIG_IDLE_LSB);
-}
-
-static u32 cqspi_get_rd_sram_level(struct cqspi_st *cqspi)
-{
- u32 reg = readl(cqspi->iobase + CQSPI_REG_SDRAMLEVEL);
-
- reg >>= CQSPI_REG_SDRAMLEVEL_RD_LSB;
- return reg & CQSPI_REG_SDRAMLEVEL_RD_MASK;
-}
-
-static irqreturn_t cqspi_irq_handler(int this_irq, void *dev)
-{
- struct cqspi_st *cqspi = dev;
- unsigned int irq_status;
-
- /* Read interrupt status */
- irq_status = readl(cqspi->iobase + CQSPI_REG_IRQSTATUS);
-
- /* Clear interrupt */
- writel(irq_status, cqspi->iobase + CQSPI_REG_IRQSTATUS);
-
- irq_status &= CQSPI_IRQ_MASK_RD | CQSPI_IRQ_MASK_WR;
-
- if (irq_status)
- complete(&cqspi->transfer_complete);
-
- return IRQ_HANDLED;
-}
-
-static unsigned int cqspi_calc_rdreg(struct spi_nor *nor)
-{
- struct cqspi_flash_pdata *f_pdata = nor->priv;
- u32 rdreg = 0;
-
- rdreg |= f_pdata->inst_width << CQSPI_REG_RD_INSTR_TYPE_INSTR_LSB;
- rdreg |= f_pdata->addr_width << CQSPI_REG_RD_INSTR_TYPE_ADDR_LSB;
- rdreg |= f_pdata->data_width << CQSPI_REG_RD_INSTR_TYPE_DATA_LSB;
-
- return rdreg;
-}
-
-static int cqspi_wait_idle(struct cqspi_st *cqspi)
-{
- const unsigned int poll_idle_retry = 3;
- unsigned int count = 0;
- unsigned long timeout;
-
- timeout = jiffies + msecs_to_jiffies(CQSPI_TIMEOUT_MS);
- while (1) {
- /*
- * Read few times in succession to ensure the controller
- * is indeed idle, that is, the bit does not transition
- * low again.
- */
- if (cqspi_is_idle(cqspi))
- count++;
- else
- count = 0;
-
- if (count >= poll_idle_retry)
- return 0;
-
- if (time_after(jiffies, timeout)) {
- /* Timeout, in busy mode. */
- dev_err(&cqspi->pdev->dev,
- "QSPI is still busy after %dms timeout.\n",
- CQSPI_TIMEOUT_MS);
- return -ETIMEDOUT;
- }
-
- cpu_relax();
- }
-}
-
-static int cqspi_exec_flash_cmd(struct cqspi_st *cqspi, unsigned int reg)
-{
- void __iomem *reg_base = cqspi->iobase;
- int ret;
-
- /* Write the CMDCTRL without start execution. */
- writel(reg, reg_base + CQSPI_REG_CMDCTRL);
- /* Start execute */
- reg |= CQSPI_REG_CMDCTRL_EXECUTE_MASK;
- writel(reg, reg_base + CQSPI_REG_CMDCTRL);
-
- /* Polling for completion. */
- ret = cqspi_wait_for_bit(reg_base + CQSPI_REG_CMDCTRL,
- CQSPI_REG_CMDCTRL_INPROGRESS_MASK, 1);
- if (ret) {
- dev_err(&cqspi->pdev->dev,
- "Flash command execution timed out.\n");
- return ret;
- }
-
- /* Polling QSPI idle status. */
- return cqspi_wait_idle(cqspi);
-}
-
-static int cqspi_command_read(struct spi_nor *nor, u8 opcode,
- u8 *rxbuf, size_t n_rx)
-{
- struct cqspi_flash_pdata *f_pdata = nor->priv;
- struct cqspi_st *cqspi = f_pdata->cqspi;
- void __iomem *reg_base = cqspi->iobase;
- unsigned int rdreg;
- unsigned int reg;
- size_t read_len;
- int status;
-
- if (!n_rx || n_rx > CQSPI_STIG_DATA_LEN_MAX || !rxbuf) {
- dev_err(nor->dev,
- "Invalid input argument, len %zu rxbuf 0x%p\n",
- n_rx, rxbuf);
- return -EINVAL;
- }
-
- reg = opcode << CQSPI_REG_CMDCTRL_OPCODE_LSB;
-
- rdreg = cqspi_calc_rdreg(nor);
- writel(rdreg, reg_base + CQSPI_REG_RD_INSTR);
-
- reg |= (0x1 << CQSPI_REG_CMDCTRL_RD_EN_LSB);
-
- /* 0 means 1 byte. */
- reg |= (((n_rx - 1) & CQSPI_REG_CMDCTRL_RD_BYTES_MASK)
- << CQSPI_REG_CMDCTRL_RD_BYTES_LSB);
- status = cqspi_exec_flash_cmd(cqspi, reg);
- if (status)
- return status;
-
- reg = readl(reg_base + CQSPI_REG_CMDREADDATALOWER);
-
- /* Put the read value into rx_buf */
- read_len = (n_rx > 4) ? 4 : n_rx;
- memcpy(rxbuf, ®, read_len);
- rxbuf += read_len;
-
- if (n_rx > 4) {
- reg = readl(reg_base + CQSPI_REG_CMDREADDATAUPPER);
-
- read_len = n_rx - read_len;
- memcpy(rxbuf, ®, read_len);
- }
-
- return 0;
-}
-
-static int cqspi_command_write(struct spi_nor *nor, const u8 opcode,
- const u8 *txbuf, size_t n_tx)
-{
- struct cqspi_flash_pdata *f_pdata = nor->priv;
- struct cqspi_st *cqspi = f_pdata->cqspi;
- void __iomem *reg_base = cqspi->iobase;
- unsigned int reg;
- unsigned int data;
- size_t write_len;
- int ret;
-
- if (n_tx > CQSPI_STIG_DATA_LEN_MAX || (n_tx && !txbuf)) {
- dev_err(nor->dev,
- "Invalid input argument, cmdlen %zu txbuf 0x%p\n",
- n_tx, txbuf);
- return -EINVAL;
- }
-
- reg = opcode << CQSPI_REG_CMDCTRL_OPCODE_LSB;
- if (n_tx) {
- reg |= (0x1 << CQSPI_REG_CMDCTRL_WR_EN_LSB);
- reg |= ((n_tx - 1) & CQSPI_REG_CMDCTRL_WR_BYTES_MASK)
- << CQSPI_REG_CMDCTRL_WR_BYTES_LSB;
- data = 0;
- write_len = (n_tx > 4) ? 4 : n_tx;
- memcpy(&data, txbuf, write_len);
- txbuf += write_len;
- writel(data, reg_base + CQSPI_REG_CMDWRITEDATALOWER);
-
- if (n_tx > 4) {
- data = 0;
- write_len = n_tx - 4;
- memcpy(&data, txbuf, write_len);
- writel(data, reg_base + CQSPI_REG_CMDWRITEDATAUPPER);
- }
- }
- ret = cqspi_exec_flash_cmd(cqspi, reg);
- return ret;
-}
-
-static int cqspi_command_write_addr(struct spi_nor *nor,
- const u8 opcode, const unsigned int addr)
-{
- struct cqspi_flash_pdata *f_pdata = nor->priv;
- struct cqspi_st *cqspi = f_pdata->cqspi;
- void __iomem *reg_base = cqspi->iobase;
- unsigned int reg;
-
- reg = opcode << CQSPI_REG_CMDCTRL_OPCODE_LSB;
- reg |= (0x1 << CQSPI_REG_CMDCTRL_ADDR_EN_LSB);
- reg |= ((nor->addr_width - 1) & CQSPI_REG_CMDCTRL_ADD_BYTES_MASK)
- << CQSPI_REG_CMDCTRL_ADD_BYTES_LSB;
-
- writel(addr, reg_base + CQSPI_REG_CMDADDRESS);
-
- return cqspi_exec_flash_cmd(cqspi, reg);
-}
-
-static int cqspi_read_setup(struct spi_nor *nor)
-{
- struct cqspi_flash_pdata *f_pdata = nor->priv;
- struct cqspi_st *cqspi = f_pdata->cqspi;
- void __iomem *reg_base = cqspi->iobase;
- unsigned int dummy_clk = 0;
- unsigned int reg;
-
- reg = nor->read_opcode << CQSPI_REG_RD_INSTR_OPCODE_LSB;
- reg |= cqspi_calc_rdreg(nor);
-
- /* Setup dummy clock cycles */
- dummy_clk = nor->read_dummy;
- if (dummy_clk > CQSPI_DUMMY_CLKS_MAX)
- dummy_clk = CQSPI_DUMMY_CLKS_MAX;
-
- if (dummy_clk / 8) {
- reg |= (1 << CQSPI_REG_RD_INSTR_MODE_EN_LSB);
- /* Set mode bits high to ensure chip doesn't enter XIP */
- writel(0xFF, reg_base + CQSPI_REG_MODE_BIT);
-
- /* Need to subtract the mode byte (8 clocks). */
- if (f_pdata->inst_width != CQSPI_INST_TYPE_QUAD)
- dummy_clk -= 8;
-
- if (dummy_clk)
- reg |= (dummy_clk & CQSPI_REG_RD_INSTR_DUMMY_MASK)
- << CQSPI_REG_RD_INSTR_DUMMY_LSB;
- }
-
- writel(reg, reg_base + CQSPI_REG_RD_INSTR);
-
- /* Set address width */
- reg = readl(reg_base + CQSPI_REG_SIZE);
- reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK;
- reg |= (nor->addr_width - 1);
- writel(reg, reg_base + CQSPI_REG_SIZE);
- return 0;
-}
-
-static int cqspi_indirect_read_execute(struct spi_nor *nor, u8 *rxbuf,
- loff_t from_addr, const size_t n_rx)
-{
- struct cqspi_flash_pdata *f_pdata = nor->priv;
- struct cqspi_st *cqspi = f_pdata->cqspi;
- void __iomem *reg_base = cqspi->iobase;
- void __iomem *ahb_base = cqspi->ahb_base;
- unsigned int remaining = n_rx;
- unsigned int mod_bytes = n_rx % 4;
- unsigned int bytes_to_read = 0;
- u8 *rxbuf_end = rxbuf + n_rx;
- int ret = 0;
-
- writel(from_addr, reg_base + CQSPI_REG_INDIRECTRDSTARTADDR);
- writel(remaining, reg_base + CQSPI_REG_INDIRECTRDBYTES);
-
- /* Clear all interrupts. */
- writel(CQSPI_IRQ_STATUS_MASK, reg_base + CQSPI_REG_IRQSTATUS);
-
- writel(CQSPI_IRQ_MASK_RD, reg_base + CQSPI_REG_IRQMASK);
-
- reinit_completion(&cqspi->transfer_complete);
- writel(CQSPI_REG_INDIRECTRD_START_MASK,
- reg_base + CQSPI_REG_INDIRECTRD);
-
- while (remaining > 0) {
- if (!wait_for_completion_timeout(&cqspi->transfer_complete,
- msecs_to_jiffies(CQSPI_READ_TIMEOUT_MS)))
- ret = -ETIMEDOUT;
-
- bytes_to_read = cqspi_get_rd_sram_level(cqspi);
-
- if (ret && bytes_to_read == 0) {
- dev_err(nor->dev, "Indirect read timeout, no bytes\n");
- goto failrd;
- }
-
- while (bytes_to_read != 0) {
- unsigned int word_remain = round_down(remaining, 4);
-
- bytes_to_read *= cqspi->fifo_width;
- bytes_to_read = bytes_to_read > remaining ?
- remaining : bytes_to_read;
- bytes_to_read = round_down(bytes_to_read, 4);
- /* Read 4 byte word chunks then single bytes */
- if (bytes_to_read) {
- ioread32_rep(ahb_base, rxbuf,
- (bytes_to_read / 4));
- } else if (!word_remain && mod_bytes) {
- unsigned int temp = ioread32(ahb_base);
-
- bytes_to_read = mod_bytes;
- memcpy(rxbuf, &temp, min((unsigned int)
- (rxbuf_end - rxbuf),
- bytes_to_read));
- }
- rxbuf += bytes_to_read;
- remaining -= bytes_to_read;
- bytes_to_read = cqspi_get_rd_sram_level(cqspi);
- }
-
- if (remaining > 0)
- reinit_completion(&cqspi->transfer_complete);
- }
-
- /* Check indirect done status */
- ret = cqspi_wait_for_bit(reg_base + CQSPI_REG_INDIRECTRD,
- CQSPI_REG_INDIRECTRD_DONE_MASK, 0);
- if (ret) {
- dev_err(nor->dev,
- "Indirect read completion error (%i)\n", ret);
- goto failrd;
- }
-
- /* Disable interrupt */
- writel(0, reg_base + CQSPI_REG_IRQMASK);
-
- /* Clear indirect completion status */
- writel(CQSPI_REG_INDIRECTRD_DONE_MASK, reg_base + CQSPI_REG_INDIRECTRD);
-
- return 0;
-
-failrd:
- /* Disable interrupt */
- writel(0, reg_base + CQSPI_REG_IRQMASK);
-
- /* Cancel the indirect read */
- writel(CQSPI_REG_INDIRECTWR_CANCEL_MASK,
- reg_base + CQSPI_REG_INDIRECTRD);
- return ret;
-}
-
-static int cqspi_write_setup(struct spi_nor *nor)
-{
- unsigned int reg;
- struct cqspi_flash_pdata *f_pdata = nor->priv;
- struct cqspi_st *cqspi = f_pdata->cqspi;
- void __iomem *reg_base = cqspi->iobase;
-
- /* Set opcode. */
- reg = nor->program_opcode << CQSPI_REG_WR_INSTR_OPCODE_LSB;
- writel(reg, reg_base + CQSPI_REG_WR_INSTR);
- reg = cqspi_calc_rdreg(nor);
- writel(reg, reg_base + CQSPI_REG_RD_INSTR);
-
- reg = readl(reg_base + CQSPI_REG_SIZE);
- reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK;
- reg |= (nor->addr_width - 1);
- writel(reg, reg_base + CQSPI_REG_SIZE);
- return 0;
-}
-
-static int cqspi_indirect_write_execute(struct spi_nor *nor, loff_t to_addr,
- const u8 *txbuf, const size_t n_tx)
-{
- const unsigned int page_size = nor->page_size;
- struct cqspi_flash_pdata *f_pdata = nor->priv;
- struct cqspi_st *cqspi = f_pdata->cqspi;
- void __iomem *reg_base = cqspi->iobase;
- unsigned int remaining = n_tx;
- unsigned int write_bytes;
- int ret;
-
- writel(to_addr, reg_base + CQSPI_REG_INDIRECTWRSTARTADDR);
- writel(remaining, reg_base + CQSPI_REG_INDIRECTWRBYTES);
-
- /* Clear all interrupts. */
- writel(CQSPI_IRQ_STATUS_MASK, reg_base + CQSPI_REG_IRQSTATUS);
-
- writel(CQSPI_IRQ_MASK_WR, reg_base + CQSPI_REG_IRQMASK);
-
- reinit_completion(&cqspi->transfer_complete);
- writel(CQSPI_REG_INDIRECTWR_START_MASK,
- reg_base + CQSPI_REG_INDIRECTWR);
- /*
- * As per 66AK2G02 TRM SPRUHY8F section 11.15.5.3 Indirect Access
- * Controller programming sequence, couple of cycles of
- * QSPI_REF_CLK delay is required for the above bit to
- * be internally synchronized by the QSPI module. Provide 5
- * cycles of delay.
- */
- if (cqspi->wr_delay)
- ndelay(cqspi->wr_delay);
-
- while (remaining > 0) {
- size_t write_words, mod_bytes;
-
- write_bytes = remaining > page_size ? page_size : remaining;
- write_words = write_bytes / 4;
- mod_bytes = write_bytes % 4;
- /* Write 4 bytes at a time then single bytes. */
- if (write_words) {
- iowrite32_rep(cqspi->ahb_base, txbuf, write_words);
- txbuf += (write_words * 4);
- }
- if (mod_bytes) {
- unsigned int temp = 0xFFFFFFFF;
-
- memcpy(&temp, txbuf, mod_bytes);
- iowrite32(temp, cqspi->ahb_base);
- txbuf += mod_bytes;
- }
-
- if (!wait_for_completion_timeout(&cqspi->transfer_complete,
- msecs_to_jiffies(CQSPI_TIMEOUT_MS))) {
- dev_err(nor->dev, "Indirect write timeout\n");
- ret = -ETIMEDOUT;
- goto failwr;
- }
-
- remaining -= write_bytes;
-
- if (remaining > 0)
- reinit_completion(&cqspi->transfer_complete);
- }
-
- /* Check indirect done status */
- ret = cqspi_wait_for_bit(reg_base + CQSPI_REG_INDIRECTWR,
- CQSPI_REG_INDIRECTWR_DONE_MASK, 0);
- if (ret) {
- dev_err(nor->dev,
- "Indirect write completion error (%i)\n", ret);
- goto failwr;
- }
-
- /* Disable interrupt. */
- writel(0, reg_base + CQSPI_REG_IRQMASK);
-
- /* Clear indirect completion status */
- writel(CQSPI_REG_INDIRECTWR_DONE_MASK, reg_base + CQSPI_REG_INDIRECTWR);
-
- cqspi_wait_idle(cqspi);
-
- return 0;
-
-failwr:
- /* Disable interrupt. */
- writel(0, reg_base + CQSPI_REG_IRQMASK);
-
- /* Cancel the indirect write */
- writel(CQSPI_REG_INDIRECTWR_CANCEL_MASK,
- reg_base + CQSPI_REG_INDIRECTWR);
- return ret;
-}
-
-static void cqspi_chipselect(struct spi_nor *nor)
-{
- struct cqspi_flash_pdata *f_pdata = nor->priv;
- struct cqspi_st *cqspi = f_pdata->cqspi;
- void __iomem *reg_base = cqspi->iobase;
- unsigned int chip_select = f_pdata->cs;
- unsigned int reg;
-
- reg = readl(reg_base + CQSPI_REG_CONFIG);
- if (cqspi->is_decoded_cs) {
- reg |= CQSPI_REG_CONFIG_DECODE_MASK;
- } else {
- reg &= ~CQSPI_REG_CONFIG_DECODE_MASK;
-
- /* Convert CS if without decoder.
- * CS0 to 4b'1110
- * CS1 to 4b'1101
- * CS2 to 4b'1011
- * CS3 to 4b'0111
- */
- chip_select = 0xF & ~(1 << chip_select);
- }
-
- reg &= ~(CQSPI_REG_CONFIG_CHIPSELECT_MASK
- << CQSPI_REG_CONFIG_CHIPSELECT_LSB);
- reg |= (chip_select & CQSPI_REG_CONFIG_CHIPSELECT_MASK)
- << CQSPI_REG_CONFIG_CHIPSELECT_LSB;
- writel(reg, reg_base + CQSPI_REG_CONFIG);
-}
-
-static void cqspi_configure_cs_and_sizes(struct spi_nor *nor)
-{
- struct cqspi_flash_pdata *f_pdata = nor->priv;
- struct cqspi_st *cqspi = f_pdata->cqspi;
- void __iomem *iobase = cqspi->iobase;
- unsigned int reg;
-
- /* configure page size and block size. */
- reg = readl(iobase + CQSPI_REG_SIZE);
- reg &= ~(CQSPI_REG_SIZE_PAGE_MASK << CQSPI_REG_SIZE_PAGE_LSB);
- reg &= ~(CQSPI_REG_SIZE_BLOCK_MASK << CQSPI_REG_SIZE_BLOCK_LSB);
- reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK;
- reg |= (nor->page_size << CQSPI_REG_SIZE_PAGE_LSB);
- reg |= (ilog2(nor->mtd.erasesize) << CQSPI_REG_SIZE_BLOCK_LSB);
- reg |= (nor->addr_width - 1);
- writel(reg, iobase + CQSPI_REG_SIZE);
-
- /* configure the chip select */
- cqspi_chipselect(nor);
-
- /* Store the new configuration of the controller */
- cqspi->current_page_size = nor->page_size;
- cqspi->current_erase_size = nor->mtd.erasesize;
- cqspi->current_addr_width = nor->addr_width;
-}
-
-static unsigned int calculate_ticks_for_ns(const unsigned int ref_clk_hz,
- const unsigned int ns_val)
-{
- unsigned int ticks;
-
- ticks = ref_clk_hz / 1000; /* kHz */
- ticks = DIV_ROUND_UP(ticks * ns_val, 1000000);
-
- return ticks;
-}
-
-static void cqspi_delay(struct spi_nor *nor)
-{
- struct cqspi_flash_pdata *f_pdata = nor->priv;
- struct cqspi_st *cqspi = f_pdata->cqspi;
- void __iomem *iobase = cqspi->iobase;
- const unsigned int ref_clk_hz = cqspi->master_ref_clk_hz;
- unsigned int tshsl, tchsh, tslch, tsd2d;
- unsigned int reg;
- unsigned int tsclk;
-
- /* calculate the number of ref ticks for one sclk tick */
- tsclk = DIV_ROUND_UP(ref_clk_hz, cqspi->sclk);
-
- tshsl = calculate_ticks_for_ns(ref_clk_hz, f_pdata->tshsl_ns);
- /* this particular value must be at least one sclk */
- if (tshsl < tsclk)
- tshsl = tsclk;
-
- tchsh = calculate_ticks_for_ns(ref_clk_hz, f_pdata->tchsh_ns);
- tslch = calculate_ticks_for_ns(ref_clk_hz, f_pdata->tslch_ns);
- tsd2d = calculate_ticks_for_ns(ref_clk_hz, f_pdata->tsd2d_ns);
-
- reg = (tshsl & CQSPI_REG_DELAY_TSHSL_MASK)
- << CQSPI_REG_DELAY_TSHSL_LSB;
- reg |= (tchsh & CQSPI_REG_DELAY_TCHSH_MASK)
- << CQSPI_REG_DELAY_TCHSH_LSB;
- reg |= (tslch & CQSPI_REG_DELAY_TSLCH_MASK)
- << CQSPI_REG_DELAY_TSLCH_LSB;
- reg |= (tsd2d & CQSPI_REG_DELAY_TSD2D_MASK)
- << CQSPI_REG_DELAY_TSD2D_LSB;
- writel(reg, iobase + CQSPI_REG_DELAY);
-}
-
-static void cqspi_config_baudrate_div(struct cqspi_st *cqspi)
-{
- const unsigned int ref_clk_hz = cqspi->master_ref_clk_hz;
- void __iomem *reg_base = cqspi->iobase;
- u32 reg, div;
-
- /* Recalculate the baudrate divisor based on QSPI specification. */
- div = DIV_ROUND_UP(ref_clk_hz, 2 * cqspi->sclk) - 1;
-
- reg = readl(reg_base + CQSPI_REG_CONFIG);
- reg &= ~(CQSPI_REG_CONFIG_BAUD_MASK << CQSPI_REG_CONFIG_BAUD_LSB);
- reg |= (div & CQSPI_REG_CONFIG_BAUD_MASK) << CQSPI_REG_CONFIG_BAUD_LSB;
- writel(reg, reg_base + CQSPI_REG_CONFIG);
-}
-
-static void cqspi_readdata_capture(struct cqspi_st *cqspi,
- const bool bypass,
- const unsigned int delay)
-{
- void __iomem *reg_base = cqspi->iobase;
- unsigned int reg;
-
- reg = readl(reg_base + CQSPI_REG_READCAPTURE);
-
- if (bypass)
- reg |= (1 << CQSPI_REG_READCAPTURE_BYPASS_LSB);
- else
- reg &= ~(1 << CQSPI_REG_READCAPTURE_BYPASS_LSB);
-
- reg &= ~(CQSPI_REG_READCAPTURE_DELAY_MASK
- << CQSPI_REG_READCAPTURE_DELAY_LSB);
-
- reg |= (delay & CQSPI_REG_READCAPTURE_DELAY_MASK)
- << CQSPI_REG_READCAPTURE_DELAY_LSB;
-
- writel(reg, reg_base + CQSPI_REG_READCAPTURE);
-}
-
-static void cqspi_controller_enable(struct cqspi_st *cqspi, bool enable)
-{
- void __iomem *reg_base = cqspi->iobase;
- unsigned int reg;
-
- reg = readl(reg_base + CQSPI_REG_CONFIG);
-
- if (enable)
- reg |= CQSPI_REG_CONFIG_ENABLE_MASK;
- else
- reg &= ~CQSPI_REG_CONFIG_ENABLE_MASK;
-
- writel(reg, reg_base + CQSPI_REG_CONFIG);
-}
-
-static void cqspi_configure(struct spi_nor *nor)
-{
- struct cqspi_flash_pdata *f_pdata = nor->priv;
- struct cqspi_st *cqspi = f_pdata->cqspi;
- const unsigned int sclk = f_pdata->clk_rate;
- int switch_cs = (cqspi->current_cs != f_pdata->cs);
- int switch_ck = (cqspi->sclk != sclk);
-
- if ((cqspi->current_page_size != nor->page_size) ||
- (cqspi->current_erase_size != nor->mtd.erasesize) ||
- (cqspi->current_addr_width != nor->addr_width))
- switch_cs = 1;
-
- if (switch_cs || switch_ck)
- cqspi_controller_enable(cqspi, 0);
-
- /* Switch chip select. */
- if (switch_cs) {
- cqspi->current_cs = f_pdata->cs;
- cqspi_configure_cs_and_sizes(nor);
- }
-
- /* Setup baudrate divisor and delays */
- if (switch_ck) {
- cqspi->sclk = sclk;
- cqspi_config_baudrate_div(cqspi);
- cqspi_delay(nor);
- cqspi_readdata_capture(cqspi, !cqspi->rclk_en,
- f_pdata->read_delay);
- }
-
- if (switch_cs || switch_ck)
- cqspi_controller_enable(cqspi, 1);
-}
-
-static int cqspi_set_protocol(struct spi_nor *nor, const int read)
-{
- struct cqspi_flash_pdata *f_pdata = nor->priv;
-
- f_pdata->inst_width = CQSPI_INST_TYPE_SINGLE;
- f_pdata->addr_width = CQSPI_INST_TYPE_SINGLE;
- f_pdata->data_width = CQSPI_INST_TYPE_SINGLE;
-
- if (read) {
- switch (nor->read_proto) {
- case SNOR_PROTO_1_1_1:
- f_pdata->data_width = CQSPI_INST_TYPE_SINGLE;
- break;
- case SNOR_PROTO_1_1_2:
- f_pdata->data_width = CQSPI_INST_TYPE_DUAL;
- break;
- case SNOR_PROTO_1_1_4:
- f_pdata->data_width = CQSPI_INST_TYPE_QUAD;
- break;
- case SNOR_PROTO_1_1_8:
- f_pdata->data_width = CQSPI_INST_TYPE_OCTAL;
- break;
- default:
- return -EINVAL;
- }
- }
-
- cqspi_configure(nor);
-
- return 0;
-}
-
-static ssize_t cqspi_write(struct spi_nor *nor, loff_t to,
- size_t len, const u_char *buf)
-{
- struct cqspi_flash_pdata *f_pdata = nor->priv;
- struct cqspi_st *cqspi = f_pdata->cqspi;
- int ret;
-
- ret = cqspi_set_protocol(nor, 0);
- if (ret)
- return ret;
-
- ret = cqspi_write_setup(nor);
- if (ret)
- return ret;
-
- if (f_pdata->use_direct_mode) {
- memcpy_toio(cqspi->ahb_base + to, buf, len);
- ret = cqspi_wait_idle(cqspi);
- } else {
- ret = cqspi_indirect_write_execute(nor, to, buf, len);
- }
- if (ret)
- return ret;
-
- return len;
-}
-
-static void cqspi_rx_dma_callback(void *param)
-{
- struct cqspi_st *cqspi = param;
-
- complete(&cqspi->rx_dma_complete);
-}
-
-static int cqspi_direct_read_execute(struct spi_nor *nor, u_char *buf,
- loff_t from, size_t len)
-{
- struct cqspi_flash_pdata *f_pdata = nor->priv;
- struct cqspi_st *cqspi = f_pdata->cqspi;
- enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
- dma_addr_t dma_src = (dma_addr_t)cqspi->mmap_phys_base + from;
- int ret = 0;
- struct dma_async_tx_descriptor *tx;
- dma_cookie_t cookie;
- dma_addr_t dma_dst;
-
- if (!cqspi->rx_chan || !virt_addr_valid(buf)) {
- memcpy_fromio(buf, cqspi->ahb_base + from, len);
- return 0;
- }
-
- dma_dst = dma_map_single(nor->dev, buf, len, DMA_FROM_DEVICE);
- if (dma_mapping_error(nor->dev, dma_dst)) {
- dev_err(nor->dev, "dma mapping failed\n");
- return -ENOMEM;
- }
- tx = dmaengine_prep_dma_memcpy(cqspi->rx_chan, dma_dst, dma_src,
- len, flags);
- if (!tx) {
- dev_err(nor->dev, "device_prep_dma_memcpy error\n");
- ret = -EIO;
- goto err_unmap;
- }
-
- tx->callback = cqspi_rx_dma_callback;
- tx->callback_param = cqspi;
- cookie = tx->tx_submit(tx);
- reinit_completion(&cqspi->rx_dma_complete);
-
- ret = dma_submit_error(cookie);
- if (ret) {
- dev_err(nor->dev, "dma_submit_error %d\n", cookie);
- ret = -EIO;
- goto err_unmap;
- }
-
- dma_async_issue_pending(cqspi->rx_chan);
- if (!wait_for_completion_timeout(&cqspi->rx_dma_complete,
- msecs_to_jiffies(len))) {
- dmaengine_terminate_sync(cqspi->rx_chan);
- dev_err(nor->dev, "DMA wait_for_completion_timeout\n");
- ret = -ETIMEDOUT;
- goto err_unmap;
- }
-
-err_unmap:
- dma_unmap_single(nor->dev, dma_dst, len, DMA_FROM_DEVICE);
-
- return ret;
-}
-
-static ssize_t cqspi_read(struct spi_nor *nor, loff_t from,
- size_t len, u_char *buf)
-{
- struct cqspi_flash_pdata *f_pdata = nor->priv;
- int ret;
-
- ret = cqspi_set_protocol(nor, 1);
- if (ret)
- return ret;
-
- ret = cqspi_read_setup(nor);
- if (ret)
- return ret;
-
- if (f_pdata->use_direct_mode)
- ret = cqspi_direct_read_execute(nor, buf, from, len);
- else
- ret = cqspi_indirect_read_execute(nor, buf, from, len);
- if (ret)
- return ret;
-
- return len;
-}
-
-static int cqspi_erase(struct spi_nor *nor, loff_t offs)
-{
- int ret;
-
- ret = cqspi_set_protocol(nor, 0);
- if (ret)
- return ret;
-
- /* Send write enable, then erase commands. */
- ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WREN, NULL, 0);
- if (ret)
- return ret;
-
- /* Set up command buffer. */
- ret = cqspi_command_write_addr(nor, nor->erase_opcode, offs);
- if (ret)
- return ret;
-
- return 0;
-}
-
-static int cqspi_prep(struct spi_nor *nor)
-{
- struct cqspi_flash_pdata *f_pdata = nor->priv;
- struct cqspi_st *cqspi = f_pdata->cqspi;
-
- mutex_lock(&cqspi->bus_mutex);
-
- return 0;
-}
-
-static void cqspi_unprep(struct spi_nor *nor)
-{
- struct cqspi_flash_pdata *f_pdata = nor->priv;
- struct cqspi_st *cqspi = f_pdata->cqspi;
-
- mutex_unlock(&cqspi->bus_mutex);
-}
-
-static int cqspi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, size_t len)
-{
- int ret;
-
- ret = cqspi_set_protocol(nor, 0);
- if (!ret)
- ret = cqspi_command_read(nor, opcode, buf, len);
-
- return ret;
-}
-
-static int cqspi_write_reg(struct spi_nor *nor, u8 opcode, const u8 *buf,
- size_t len)
-{
- int ret;
-
- ret = cqspi_set_protocol(nor, 0);
- if (!ret)
- ret = cqspi_command_write(nor, opcode, buf, len);
-
- return ret;
-}
-
-static int cqspi_of_get_flash_pdata(struct platform_device *pdev,
- struct cqspi_flash_pdata *f_pdata,
- struct device_node *np)
-{
- if (of_property_read_u32(np, "cdns,read-delay", &f_pdata->read_delay)) {
- dev_err(&pdev->dev, "couldn't determine read-delay\n");
- return -ENXIO;
- }
-
- if (of_property_read_u32(np, "cdns,tshsl-ns", &f_pdata->tshsl_ns)) {
- dev_err(&pdev->dev, "couldn't determine tshsl-ns\n");
- return -ENXIO;
- }
-
- if (of_property_read_u32(np, "cdns,tsd2d-ns", &f_pdata->tsd2d_ns)) {
- dev_err(&pdev->dev, "couldn't determine tsd2d-ns\n");
- return -ENXIO;
- }
-
- if (of_property_read_u32(np, "cdns,tchsh-ns", &f_pdata->tchsh_ns)) {
- dev_err(&pdev->dev, "couldn't determine tchsh-ns\n");
- return -ENXIO;
- }
-
- if (of_property_read_u32(np, "cdns,tslch-ns", &f_pdata->tslch_ns)) {
- dev_err(&pdev->dev, "couldn't determine tslch-ns\n");
- return -ENXIO;
- }
-
- if (of_property_read_u32(np, "spi-max-frequency", &f_pdata->clk_rate)) {
- dev_err(&pdev->dev, "couldn't determine spi-max-frequency\n");
- return -ENXIO;
- }
-
- return 0;
-}
-
-static int cqspi_of_get_pdata(struct platform_device *pdev)
-{
- struct device_node *np = pdev->dev.of_node;
- struct cqspi_st *cqspi = platform_get_drvdata(pdev);
-
- cqspi->is_decoded_cs = of_property_read_bool(np, "cdns,is-decoded-cs");
-
- if (of_property_read_u32(np, "cdns,fifo-depth", &cqspi->fifo_depth)) {
- dev_err(&pdev->dev, "couldn't determine fifo-depth\n");
- return -ENXIO;
- }
-
- if (of_property_read_u32(np, "cdns,fifo-width", &cqspi->fifo_width)) {
- dev_err(&pdev->dev, "couldn't determine fifo-width\n");
- return -ENXIO;
- }
-
- if (of_property_read_u32(np, "cdns,trigger-address",
- &cqspi->trigger_address)) {
- dev_err(&pdev->dev, "couldn't determine trigger-address\n");
- return -ENXIO;
- }
-
- cqspi->rclk_en = of_property_read_bool(np, "cdns,rclk-en");
-
- return 0;
-}
-
-static void cqspi_controller_init(struct cqspi_st *cqspi)
-{
- u32 reg;
-
- cqspi_controller_enable(cqspi, 0);
-
- /* Configure the remap address register, no remap */
- writel(0, cqspi->iobase + CQSPI_REG_REMAP);
-
- /* Disable all interrupts. */
- writel(0, cqspi->iobase + CQSPI_REG_IRQMASK);
-
- /* Configure the SRAM split to 1:1 . */
- writel(cqspi->fifo_depth / 2, cqspi->iobase + CQSPI_REG_SRAMPARTITION);
-
- /* Load indirect trigger address. */
- writel(cqspi->trigger_address,
- cqspi->iobase + CQSPI_REG_INDIRECTTRIGGER);
-
- /* Program read watermark -- 1/2 of the FIFO. */
- writel(cqspi->fifo_depth * cqspi->fifo_width / 2,
- cqspi->iobase + CQSPI_REG_INDIRECTRDWATERMARK);
- /* Program write watermark -- 1/8 of the FIFO. */
- writel(cqspi->fifo_depth * cqspi->fifo_width / 8,
- cqspi->iobase + CQSPI_REG_INDIRECTWRWATERMARK);
-
- /* Enable Direct Access Controller */
- reg = readl(cqspi->iobase + CQSPI_REG_CONFIG);
- reg |= CQSPI_REG_CONFIG_ENB_DIR_ACC_CTRL;
- writel(reg, cqspi->iobase + CQSPI_REG_CONFIG);
-
- cqspi_controller_enable(cqspi, 1);
-}
-
-static void cqspi_request_mmap_dma(struct cqspi_st *cqspi)
-{
- dma_cap_mask_t mask;
-
- dma_cap_zero(mask);
- dma_cap_set(DMA_MEMCPY, mask);
-
- cqspi->rx_chan = dma_request_chan_by_mask(&mask);
- if (IS_ERR(cqspi->rx_chan)) {
- dev_err(&cqspi->pdev->dev, "No Rx DMA available\n");
- cqspi->rx_chan = NULL;
- }
- init_completion(&cqspi->rx_dma_complete);
-}
-
-static const struct spi_nor_controller_ops cqspi_controller_ops = {
- .prepare = cqspi_prep,
- .unprepare = cqspi_unprep,
- .read_reg = cqspi_read_reg,
- .write_reg = cqspi_write_reg,
- .read = cqspi_read,
- .write = cqspi_write,
- .erase = cqspi_erase,
-};
-
-static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np)
-{
- struct platform_device *pdev = cqspi->pdev;
- struct device *dev = &pdev->dev;
- const struct cqspi_driver_platdata *ddata;
- struct spi_nor_hwcaps hwcaps;
- struct cqspi_flash_pdata *f_pdata;
- struct spi_nor *nor;
- struct mtd_info *mtd;
- unsigned int cs;
- int i, ret;
-
- ddata = of_device_get_match_data(dev);
- if (!ddata) {
- dev_err(dev, "Couldn't find driver data\n");
- return -EINVAL;
- }
- hwcaps.mask = ddata->hwcaps_mask;
-
- /* Get flash device data */
- for_each_available_child_of_node(dev->of_node, np) {
- ret = of_property_read_u32(np, "reg", &cs);
- if (ret) {
- dev_err(dev, "Couldn't determine chip select.\n");
- goto err;
- }
-
- if (cs >= CQSPI_MAX_CHIPSELECT) {
- ret = -EINVAL;
- dev_err(dev, "Chip select %d out of range.\n", cs);
- goto err;
- }
-
- f_pdata = &cqspi->f_pdata[cs];
- f_pdata->cqspi = cqspi;
- f_pdata->cs = cs;
-
- ret = cqspi_of_get_flash_pdata(pdev, f_pdata, np);
- if (ret)
- goto err;
-
- nor = &f_pdata->nor;
- mtd = &nor->mtd;
-
- mtd->priv = nor;
-
- nor->dev = dev;
- spi_nor_set_flash_node(nor, np);
- nor->priv = f_pdata;
- nor->controller_ops = &cqspi_controller_ops;
-
- mtd->name = devm_kasprintf(dev, GFP_KERNEL, "%s.%d",
- dev_name(dev), cs);
- if (!mtd->name) {
- ret = -ENOMEM;
- goto err;
- }
-
- ret = spi_nor_scan(nor, NULL, &hwcaps);
- if (ret)
- goto err;
-
- ret = mtd_device_register(mtd, NULL, 0);
- if (ret)
- goto err;
-
- f_pdata->registered = true;
-
- if (mtd->size <= cqspi->ahb_size) {
- f_pdata->use_direct_mode = true;
- dev_dbg(nor->dev, "using direct mode for %s\n",
- mtd->name);
-
- if (!cqspi->rx_chan)
- cqspi_request_mmap_dma(cqspi);
- }
- }
-
- return 0;
-
-err:
- for (i = 0; i < CQSPI_MAX_CHIPSELECT; i++)
- if (cqspi->f_pdata[i].registered)
- mtd_device_unregister(&cqspi->f_pdata[i].nor.mtd);
- return ret;
-}
-
-static int cqspi_probe(struct platform_device *pdev)
-{
- struct device_node *np = pdev->dev.of_node;
- struct device *dev = &pdev->dev;
- struct cqspi_st *cqspi;
- struct resource *res;
- struct resource *res_ahb;
- struct reset_control *rstc, *rstc_ocp;
- const struct cqspi_driver_platdata *ddata;
- int ret;
- int irq;
-
- cqspi = devm_kzalloc(dev, sizeof(*cqspi), GFP_KERNEL);
- if (!cqspi)
- return -ENOMEM;
-
- mutex_init(&cqspi->bus_mutex);
- cqspi->pdev = pdev;
- platform_set_drvdata(pdev, cqspi);
-
- /* Obtain configuration from OF. */
- ret = cqspi_of_get_pdata(pdev);
- if (ret) {
- dev_err(dev, "Cannot get mandatory OF data.\n");
- return -ENODEV;
- }
-
- /* Obtain QSPI clock. */
- cqspi->clk = devm_clk_get(dev, NULL);
- if (IS_ERR(cqspi->clk)) {
- dev_err(dev, "Cannot claim QSPI clock.\n");
- return PTR_ERR(cqspi->clk);
- }
-
- /* Obtain and remap controller address. */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- cqspi->iobase = devm_ioremap_resource(dev, res);
- if (IS_ERR(cqspi->iobase)) {
- dev_err(dev, "Cannot remap controller address.\n");
- return PTR_ERR(cqspi->iobase);
- }
-
- /* Obtain and remap AHB address. */
- res_ahb = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- cqspi->ahb_base = devm_ioremap_resource(dev, res_ahb);
- if (IS_ERR(cqspi->ahb_base)) {
- dev_err(dev, "Cannot remap AHB address.\n");
- return PTR_ERR(cqspi->ahb_base);
- }
- cqspi->mmap_phys_base = (dma_addr_t)res_ahb->start;
- cqspi->ahb_size = resource_size(res_ahb);
-
- init_completion(&cqspi->transfer_complete);
-
- /* Obtain IRQ line. */
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
- return -ENXIO;
-
- pm_runtime_enable(dev);
- ret = pm_runtime_get_sync(dev);
- if (ret < 0) {
- pm_runtime_put_noidle(dev);
- return ret;
- }
-
- ret = clk_prepare_enable(cqspi->clk);
- if (ret) {
- dev_err(dev, "Cannot enable QSPI clock.\n");
- goto probe_clk_failed;
- }
-
- /* Obtain QSPI reset control */
- rstc = devm_reset_control_get_optional_exclusive(dev, "qspi");
- if (IS_ERR(rstc)) {
- dev_err(dev, "Cannot get QSPI reset.\n");
- return PTR_ERR(rstc);
- }
-
- rstc_ocp = devm_reset_control_get_optional_exclusive(dev, "qspi-ocp");
- if (IS_ERR(rstc_ocp)) {
- dev_err(dev, "Cannot get QSPI OCP reset.\n");
- return PTR_ERR(rstc_ocp);
- }
-
- reset_control_assert(rstc);
- reset_control_deassert(rstc);
-
- reset_control_assert(rstc_ocp);
- reset_control_deassert(rstc_ocp);
-
- cqspi->master_ref_clk_hz = clk_get_rate(cqspi->clk);
- ddata = of_device_get_match_data(dev);
- if (ddata && (ddata->quirks & CQSPI_NEEDS_WR_DELAY))
- cqspi->wr_delay = 5 * DIV_ROUND_UP(NSEC_PER_SEC,
- cqspi->master_ref_clk_hz);
-
- ret = devm_request_irq(dev, irq, cqspi_irq_handler, 0,
- pdev->name, cqspi);
- if (ret) {
- dev_err(dev, "Cannot request IRQ.\n");
- goto probe_irq_failed;
- }
-
- cqspi_wait_idle(cqspi);
- cqspi_controller_init(cqspi);
- cqspi->current_cs = -1;
- cqspi->sclk = 0;
-
- ret = cqspi_setup_flash(cqspi, np);
- if (ret) {
- dev_err(dev, "Cadence QSPI NOR probe failed %d\n", ret);
- goto probe_setup_failed;
- }
-
- return ret;
-probe_setup_failed:
- cqspi_controller_enable(cqspi, 0);
-probe_irq_failed:
- clk_disable_unprepare(cqspi->clk);
-probe_clk_failed:
- pm_runtime_put_sync(dev);
- pm_runtime_disable(dev);
- return ret;
-}
-
-static int cqspi_remove(struct platform_device *pdev)
-{
- struct cqspi_st *cqspi = platform_get_drvdata(pdev);
- int i;
-
- for (i = 0; i < CQSPI_MAX_CHIPSELECT; i++)
- if (cqspi->f_pdata[i].registered)
- mtd_device_unregister(&cqspi->f_pdata[i].nor.mtd);
-
- cqspi_controller_enable(cqspi, 0);
-
- if (cqspi->rx_chan)
- dma_release_channel(cqspi->rx_chan);
-
- clk_disable_unprepare(cqspi->clk);
-
- pm_runtime_put_sync(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
-
- return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int cqspi_suspend(struct device *dev)
-{
- struct cqspi_st *cqspi = dev_get_drvdata(dev);
-
- cqspi_controller_enable(cqspi, 0);
- return 0;
-}
-
-static int cqspi_resume(struct device *dev)
-{
- struct cqspi_st *cqspi = dev_get_drvdata(dev);
-
- cqspi_controller_enable(cqspi, 1);
- return 0;
-}
-
-static const struct dev_pm_ops cqspi__dev_pm_ops = {
- .suspend = cqspi_suspend,
- .resume = cqspi_resume,
-};
-
-#define CQSPI_DEV_PM_OPS (&cqspi__dev_pm_ops)
-#else
-#define CQSPI_DEV_PM_OPS NULL
-#endif
-
-static const struct cqspi_driver_platdata cdns_qspi = {
- .hwcaps_mask = CQSPI_BASE_HWCAPS_MASK,
-};
-
-static const struct cqspi_driver_platdata k2g_qspi = {
- .hwcaps_mask = CQSPI_BASE_HWCAPS_MASK,
- .quirks = CQSPI_NEEDS_WR_DELAY,
-};
-
-static const struct cqspi_driver_platdata am654_ospi = {
- .hwcaps_mask = CQSPI_BASE_HWCAPS_MASK | SNOR_HWCAPS_READ_1_1_8,
- .quirks = CQSPI_NEEDS_WR_DELAY,
-};
-
-static const struct of_device_id cqspi_dt_ids[] = {
- {
- .compatible = "cdns,qspi-nor",
- .data = &cdns_qspi,
- },
- {
- .compatible = "ti,k2g-qspi",
- .data = &k2g_qspi,
- },
- {
- .compatible = "ti,am654-ospi",
- .data = &am654_ospi,
- },
- { /* end of table */ }
-};
-
-MODULE_DEVICE_TABLE(of, cqspi_dt_ids);
-
-static struct platform_driver cqspi_platform_driver = {
- .probe = cqspi_probe,
- .remove = cqspi_remove,
- .driver = {
- .name = CQSPI_NAME,
- .pm = CQSPI_DEV_PM_OPS,
- .of_match_table = cqspi_dt_ids,
- },
-};
-
-module_platform_driver(cqspi_platform_driver);
-
-MODULE_DESCRIPTION("Cadence QSPI Controller Driver");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:" CQSPI_NAME);
-MODULE_AUTHOR("Ley Foon Tan <lftan@altera.com>");
-MODULE_AUTHOR("Graham Moore <grmoore@opensource.altera.com>");
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info catalyst_parts[] = {
+ /* Catalyst / On Semiconductor -- non-JEDEC */
+ { "cat25c11", CAT25_INFO(16, 8, 16, 1,
+ SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+ { "cat25c03", CAT25_INFO(32, 8, 16, 2,
+ SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+ { "cat25c09", CAT25_INFO(128, 8, 32, 2,
+ SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+ { "cat25c17", CAT25_INFO(256, 8, 32, 2,
+ SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+ { "cat25128", CAT25_INFO(2048, 8, 64, 2,
+ SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+};
+
+const struct spi_nor_manufacturer spi_nor_catalyst = {
+ .name = "catalyst",
+ .parts = catalyst_parts,
+ .nparts = ARRAY_SIZE(catalyst_parts),
+};
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only
+config SPI_ASPEED_SMC
+ tristate "Aspeed flash controllers in SPI mode"
+ depends on ARCH_ASPEED || COMPILE_TEST
+ depends on HAS_IOMEM && OF
+ help
+ This enables support for the Firmware Memory controller (FMC)
+ in the Aspeed AST2500/AST2400 SoCs when attached to SPI NOR chips,
+ and support for the SPI flash memory controller (SPI) for
+ the host firmware. The implementation only supports SPI NOR.
+
+config SPI_CADENCE_QUADSPI
+ tristate "Cadence Quad SPI controller"
+ depends on OF && (ARM || ARM64 || COMPILE_TEST)
+ help
+ Enable support for the Cadence Quad SPI Flash controller.
+
+ Cadence QSPI is a specialized controller for connecting an SPI
+ Flash over 1/2/4-bit wide bus. Enable this option if you have a
+ device with a Cadence QSPI controller and want to access the
+ Flash as an MTD device.
+
+config SPI_HISI_SFC
+ tristate "Hisilicon FMC SPI-NOR Flash Controller(SFC)"
+ depends on ARCH_HISI || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ This enables support for HiSilicon FMC SPI-NOR flash controller.
+
+config SPI_NXP_SPIFI
+ tristate "NXP SPI Flash Interface (SPIFI)"
+ depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
+ depends on HAS_IOMEM
+ help
+ Enable support for the NXP LPC SPI Flash Interface controller.
+
+ SPIFI is a specialized controller for connecting serial SPI
+ Flash. Enable this option if you have a device with a SPIFI
+ controller and want to access the Flash as a mtd device.
+
+config SPI_INTEL_SPI
+ tristate
+
+config SPI_INTEL_SPI_PCI
+ tristate "Intel PCH/PCU SPI flash PCI driver (DANGEROUS)"
+ depends on X86 && PCI
+ select SPI_INTEL_SPI
+ help
+ This enables PCI support for the Intel PCH/PCU SPI controller in
+ master mode. This controller is present in modern Intel hardware
+ and is used to hold BIOS and other persistent settings. Using
+ this driver it is possible to upgrade BIOS directly from Linux.
+
+ Say N here unless you know what you are doing. Overwriting the
+ SPI flash may render the system unbootable.
+
+ To compile this driver as a module, choose M here: the module
+ will be called intel-spi-pci.
+
+config SPI_INTEL_SPI_PLATFORM
+ tristate "Intel PCH/PCU SPI flash platform driver (DANGEROUS)"
+ depends on X86
+ select SPI_INTEL_SPI
+ help
+ This enables platform support for the Intel PCH/PCU SPI
+ controller in master mode. This controller is present in modern
+ Intel hardware and is used to hold BIOS and other persistent
+ settings. Using this driver it is possible to upgrade BIOS
+ directly from Linux.
+
+ Say N here unless you know what you are doing. Overwriting the
+ SPI flash may render the system unbootable.
+
+ To compile this driver as a module, choose M here: the module
+ will be called intel-spi-platform.
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_SPI_ASPEED_SMC) += aspeed-smc.o
+obj-$(CONFIG_SPI_CADENCE_QUADSPI) += cadence-quadspi.o
+obj-$(CONFIG_SPI_HISI_SFC) += hisi-sfc.o
+obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o
+obj-$(CONFIG_SPI_INTEL_SPI) += intel-spi.o
+obj-$(CONFIG_SPI_INTEL_SPI_PCI) += intel-spi-pci.o
+obj-$(CONFIG_SPI_INTEL_SPI_PLATFORM) += intel-spi-platform.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ASPEED Static Memory Controller driver
+ *
+ * Copyright (c) 2015-2016, IBM Corporation.
+ */
+
+#include <linux/bug.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/spi-nor.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/sizes.h>
+#include <linux/sysfs.h>
+
+#define DEVICE_NAME "aspeed-smc"
+
+/*
+ * The driver only support SPI flash
+ */
+enum aspeed_smc_flash_type {
+ smc_type_nor = 0,
+ smc_type_nand = 1,
+ smc_type_spi = 2,
+};
+
+struct aspeed_smc_chip;
+
+struct aspeed_smc_info {
+ u32 maxsize; /* maximum size of chip window */
+ u8 nce; /* number of chip enables */
+ bool hastype; /* flash type field exists in config reg */
+ u8 we0; /* shift for write enable bit for CE0 */
+ u8 ctl0; /* offset in regs of ctl for CE0 */
+
+ void (*set_4b)(struct aspeed_smc_chip *chip);
+};
+
+static void aspeed_smc_chip_set_4b_spi_2400(struct aspeed_smc_chip *chip);
+static void aspeed_smc_chip_set_4b(struct aspeed_smc_chip *chip);
+
+static const struct aspeed_smc_info fmc_2400_info = {
+ .maxsize = 64 * 1024 * 1024,
+ .nce = 5,
+ .hastype = true,
+ .we0 = 16,
+ .ctl0 = 0x10,
+ .set_4b = aspeed_smc_chip_set_4b,
+};
+
+static const struct aspeed_smc_info spi_2400_info = {
+ .maxsize = 64 * 1024 * 1024,
+ .nce = 1,
+ .hastype = false,
+ .we0 = 0,
+ .ctl0 = 0x04,
+ .set_4b = aspeed_smc_chip_set_4b_spi_2400,
+};
+
+static const struct aspeed_smc_info fmc_2500_info = {
+ .maxsize = 256 * 1024 * 1024,
+ .nce = 3,
+ .hastype = true,
+ .we0 = 16,
+ .ctl0 = 0x10,
+ .set_4b = aspeed_smc_chip_set_4b,
+};
+
+static const struct aspeed_smc_info spi_2500_info = {
+ .maxsize = 128 * 1024 * 1024,
+ .nce = 2,
+ .hastype = false,
+ .we0 = 16,
+ .ctl0 = 0x10,
+ .set_4b = aspeed_smc_chip_set_4b,
+};
+
+enum aspeed_smc_ctl_reg_value {
+ smc_base, /* base value without mode for other commands */
+ smc_read, /* command reg for (maybe fast) reads */
+ smc_write, /* command reg for writes */
+ smc_max,
+};
+
+struct aspeed_smc_controller;
+
+struct aspeed_smc_chip {
+ int cs;
+ struct aspeed_smc_controller *controller;
+ void __iomem *ctl; /* control register */
+ void __iomem *ahb_base; /* base of chip window */
+ u32 ahb_window_size; /* chip mapping window size */
+ u32 ctl_val[smc_max]; /* control settings */
+ enum aspeed_smc_flash_type type; /* what type of flash */
+ struct spi_nor nor;
+};
+
+struct aspeed_smc_controller {
+ struct device *dev;
+
+ struct mutex mutex; /* controller access mutex */
+ const struct aspeed_smc_info *info; /* type info of controller */
+ void __iomem *regs; /* controller registers */
+ void __iomem *ahb_base; /* per-chip windows resource */
+ u32 ahb_window_size; /* full mapping window size */
+
+ struct aspeed_smc_chip *chips[]; /* pointers to attached chips */
+};
+
+/*
+ * SPI Flash Configuration Register (AST2500 SPI)
+ * or
+ * Type setting Register (AST2500 FMC).
+ * CE0 and CE1 can only be of type SPI. CE2 can be of type NOR but the
+ * driver does not support it.
+ */
+#define CONFIG_REG 0x0
+#define CONFIG_DISABLE_LEGACY BIT(31) /* 1 */
+
+#define CONFIG_CE2_WRITE BIT(18)
+#define CONFIG_CE1_WRITE BIT(17)
+#define CONFIG_CE0_WRITE BIT(16)
+
+#define CONFIG_CE2_TYPE BIT(4) /* AST2500 FMC only */
+#define CONFIG_CE1_TYPE BIT(2) /* AST2500 FMC only */
+#define CONFIG_CE0_TYPE BIT(0) /* AST2500 FMC only */
+
+/*
+ * CE Control Register
+ */
+#define CE_CONTROL_REG 0x4
+
+/*
+ * CEx Control Register
+ */
+#define CONTROL_AAF_MODE BIT(31)
+#define CONTROL_IO_MODE_MASK GENMASK(30, 28)
+#define CONTROL_IO_DUAL_DATA BIT(29)
+#define CONTROL_IO_DUAL_ADDR_DATA (BIT(29) | BIT(28))
+#define CONTROL_IO_QUAD_DATA BIT(30)
+#define CONTROL_IO_QUAD_ADDR_DATA (BIT(30) | BIT(28))
+#define CONTROL_CE_INACTIVE_SHIFT 24
+#define CONTROL_CE_INACTIVE_MASK GENMASK(27, \
+ CONTROL_CE_INACTIVE_SHIFT)
+/* 0 = 16T ... 15 = 1T T=HCLK */
+#define CONTROL_COMMAND_SHIFT 16
+#define CONTROL_DUMMY_COMMAND_OUT BIT(15)
+#define CONTROL_IO_DUMMY_HI BIT(14)
+#define CONTROL_IO_DUMMY_HI_SHIFT 14
+#define CONTROL_CLK_DIV4 BIT(13) /* others */
+#define CONTROL_IO_ADDRESS_4B BIT(13) /* AST2400 SPI */
+#define CONTROL_RW_MERGE BIT(12)
+#define CONTROL_IO_DUMMY_LO_SHIFT 6
+#define CONTROL_IO_DUMMY_LO GENMASK(7, \
+ CONTROL_IO_DUMMY_LO_SHIFT)
+#define CONTROL_IO_DUMMY_MASK (CONTROL_IO_DUMMY_HI | \
+ CONTROL_IO_DUMMY_LO)
+#define CONTROL_IO_DUMMY_SET(dummy) \
+ (((((dummy) >> 2) & 0x1) << CONTROL_IO_DUMMY_HI_SHIFT) | \
+ (((dummy) & 0x3) << CONTROL_IO_DUMMY_LO_SHIFT))
+
+#define CONTROL_CLOCK_FREQ_SEL_SHIFT 8
+#define CONTROL_CLOCK_FREQ_SEL_MASK GENMASK(11, \
+ CONTROL_CLOCK_FREQ_SEL_SHIFT)
+#define CONTROL_LSB_FIRST BIT(5)
+#define CONTROL_CLOCK_MODE_3 BIT(4)
+#define CONTROL_IN_DUAL_DATA BIT(3)
+#define CONTROL_CE_STOP_ACTIVE_CONTROL BIT(2)
+#define CONTROL_COMMAND_MODE_MASK GENMASK(1, 0)
+#define CONTROL_COMMAND_MODE_NORMAL 0
+#define CONTROL_COMMAND_MODE_FREAD 1
+#define CONTROL_COMMAND_MODE_WRITE 2
+#define CONTROL_COMMAND_MODE_USER 3
+
+#define CONTROL_KEEP_MASK \
+ (CONTROL_AAF_MODE | CONTROL_CE_INACTIVE_MASK | CONTROL_CLK_DIV4 | \
+ CONTROL_CLOCK_FREQ_SEL_MASK | CONTROL_LSB_FIRST | CONTROL_CLOCK_MODE_3)
+
+/*
+ * The Segment Register uses a 8MB unit to encode the start address
+ * and the end address of the mapping window of a flash SPI slave :
+ *
+ * | byte 1 | byte 2 | byte 3 | byte 4 |
+ * +--------+--------+--------+--------+
+ * | end | start | 0 | 0 |
+ */
+#define SEGMENT_ADDR_REG0 0x30
+#define SEGMENT_ADDR_START(_r) ((((_r) >> 16) & 0xFF) << 23)
+#define SEGMENT_ADDR_END(_r) ((((_r) >> 24) & 0xFF) << 23)
+#define SEGMENT_ADDR_VALUE(start, end) \
+ (((((start) >> 23) & 0xFF) << 16) | ((((end) >> 23) & 0xFF) << 24))
+#define SEGMENT_ADDR_REG(controller, cs) \
+ ((controller)->regs + SEGMENT_ADDR_REG0 + (cs) * 4)
+
+/*
+ * In user mode all data bytes read or written to the chip decode address
+ * range are transferred to or from the SPI bus. The range is treated as a
+ * fifo of arbitratry 1, 2, or 4 byte width but each write has to be aligned
+ * to its size. The address within the multiple 8kB range is ignored when
+ * sending bytes to the SPI bus.
+ *
+ * On the arm architecture, as of Linux version 4.3, memcpy_fromio and
+ * memcpy_toio on little endian targets use the optimized memcpy routines
+ * that were designed for well behavied memory storage. These routines
+ * have a stutter if the source and destination are not both word aligned,
+ * once with a duplicate access to the source after aligning to the
+ * destination to a word boundary, and again with a duplicate access to
+ * the source when the final byte count is not word aligned.
+ *
+ * When writing or reading the fifo this stutter discards data or sends
+ * too much data to the fifo and can not be used by this driver.
+ *
+ * While the low level io string routines that implement the insl family do
+ * the desired accesses and memory increments, the cross architecture io
+ * macros make them essentially impossible to use on a memory mapped address
+ * instead of a a token from the call to iomap of an io port.
+ *
+ * These fifo routines use readl and friends to a constant io port and update
+ * the memory buffer pointer and count via explicit code. The final updates
+ * to len are optimistically suppressed.
+ */
+static int aspeed_smc_read_from_ahb(void *buf, void __iomem *src, size_t len)
+{
+ size_t offset = 0;
+
+ if (IS_ALIGNED((uintptr_t)src, sizeof(uintptr_t)) &&
+ IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) {
+ ioread32_rep(src, buf, len >> 2);
+ offset = len & ~0x3;
+ len -= offset;
+ }
+ ioread8_rep(src, (u8 *)buf + offset, len);
+ return 0;
+}
+
+static int aspeed_smc_write_to_ahb(void __iomem *dst, const void *buf,
+ size_t len)
+{
+ size_t offset = 0;
+
+ if (IS_ALIGNED((uintptr_t)dst, sizeof(uintptr_t)) &&
+ IS_ALIGNED((uintptr_t)buf, sizeof(uintptr_t))) {
+ iowrite32_rep(dst, buf, len >> 2);
+ offset = len & ~0x3;
+ len -= offset;
+ }
+ iowrite8_rep(dst, (const u8 *)buf + offset, len);
+ return 0;
+}
+
+static inline u32 aspeed_smc_chip_write_bit(struct aspeed_smc_chip *chip)
+{
+ return BIT(chip->controller->info->we0 + chip->cs);
+}
+
+static void aspeed_smc_chip_check_config(struct aspeed_smc_chip *chip)
+{
+ struct aspeed_smc_controller *controller = chip->controller;
+ u32 reg;
+
+ reg = readl(controller->regs + CONFIG_REG);
+
+ if (reg & aspeed_smc_chip_write_bit(chip))
+ return;
+
+ dev_dbg(controller->dev, "config write is not set ! @%p: 0x%08x\n",
+ controller->regs + CONFIG_REG, reg);
+ reg |= aspeed_smc_chip_write_bit(chip);
+ writel(reg, controller->regs + CONFIG_REG);
+}
+
+static void aspeed_smc_start_user(struct spi_nor *nor)
+{
+ struct aspeed_smc_chip *chip = nor->priv;
+ u32 ctl = chip->ctl_val[smc_base];
+
+ /*
+ * When the chip is controlled in user mode, we need write
+ * access to send the opcodes to it. So check the config.
+ */
+ aspeed_smc_chip_check_config(chip);
+
+ ctl |= CONTROL_COMMAND_MODE_USER |
+ CONTROL_CE_STOP_ACTIVE_CONTROL;
+ writel(ctl, chip->ctl);
+
+ ctl &= ~CONTROL_CE_STOP_ACTIVE_CONTROL;
+ writel(ctl, chip->ctl);
+}
+
+static void aspeed_smc_stop_user(struct spi_nor *nor)
+{
+ struct aspeed_smc_chip *chip = nor->priv;
+
+ u32 ctl = chip->ctl_val[smc_read];
+ u32 ctl2 = ctl | CONTROL_COMMAND_MODE_USER |
+ CONTROL_CE_STOP_ACTIVE_CONTROL;
+
+ writel(ctl2, chip->ctl); /* stop user CE control */
+ writel(ctl, chip->ctl); /* default to fread or read mode */
+}
+
+static int aspeed_smc_prep(struct spi_nor *nor)
+{
+ struct aspeed_smc_chip *chip = nor->priv;
+
+ mutex_lock(&chip->controller->mutex);
+ return 0;
+}
+
+static void aspeed_smc_unprep(struct spi_nor *nor)
+{
+ struct aspeed_smc_chip *chip = nor->priv;
+
+ mutex_unlock(&chip->controller->mutex);
+}
+
+static int aspeed_smc_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
+ size_t len)
+{
+ struct aspeed_smc_chip *chip = nor->priv;
+
+ aspeed_smc_start_user(nor);
+ aspeed_smc_write_to_ahb(chip->ahb_base, &opcode, 1);
+ aspeed_smc_read_from_ahb(buf, chip->ahb_base, len);
+ aspeed_smc_stop_user(nor);
+ return 0;
+}
+
+static int aspeed_smc_write_reg(struct spi_nor *nor, u8 opcode, const u8 *buf,
+ size_t len)
+{
+ struct aspeed_smc_chip *chip = nor->priv;
+
+ aspeed_smc_start_user(nor);
+ aspeed_smc_write_to_ahb(chip->ahb_base, &opcode, 1);
+ aspeed_smc_write_to_ahb(chip->ahb_base, buf, len);
+ aspeed_smc_stop_user(nor);
+ return 0;
+}
+
+static void aspeed_smc_send_cmd_addr(struct spi_nor *nor, u8 cmd, u32 addr)
+{
+ struct aspeed_smc_chip *chip = nor->priv;
+ __be32 temp;
+ u32 cmdaddr;
+
+ switch (nor->addr_width) {
+ default:
+ WARN_ONCE(1, "Unexpected address width %u, defaulting to 3\n",
+ nor->addr_width);
+ /* FALLTHROUGH */
+ case 3:
+ cmdaddr = addr & 0xFFFFFF;
+ cmdaddr |= cmd << 24;
+
+ temp = cpu_to_be32(cmdaddr);
+ aspeed_smc_write_to_ahb(chip->ahb_base, &temp, 4);
+ break;
+ case 4:
+ temp = cpu_to_be32(addr);
+ aspeed_smc_write_to_ahb(chip->ahb_base, &cmd, 1);
+ aspeed_smc_write_to_ahb(chip->ahb_base, &temp, 4);
+ break;
+ }
+}
+
+static ssize_t aspeed_smc_read_user(struct spi_nor *nor, loff_t from,
+ size_t len, u_char *read_buf)
+{
+ struct aspeed_smc_chip *chip = nor->priv;
+ int i;
+ u8 dummy = 0xFF;
+
+ aspeed_smc_start_user(nor);
+ aspeed_smc_send_cmd_addr(nor, nor->read_opcode, from);
+ for (i = 0; i < chip->nor.read_dummy / 8; i++)
+ aspeed_smc_write_to_ahb(chip->ahb_base, &dummy, sizeof(dummy));
+
+ aspeed_smc_read_from_ahb(read_buf, chip->ahb_base, len);
+ aspeed_smc_stop_user(nor);
+ return len;
+}
+
+static ssize_t aspeed_smc_write_user(struct spi_nor *nor, loff_t to,
+ size_t len, const u_char *write_buf)
+{
+ struct aspeed_smc_chip *chip = nor->priv;
+
+ aspeed_smc_start_user(nor);
+ aspeed_smc_send_cmd_addr(nor, nor->program_opcode, to);
+ aspeed_smc_write_to_ahb(chip->ahb_base, write_buf, len);
+ aspeed_smc_stop_user(nor);
+ return len;
+}
+
+static int aspeed_smc_unregister(struct aspeed_smc_controller *controller)
+{
+ struct aspeed_smc_chip *chip;
+ int n;
+
+ for (n = 0; n < controller->info->nce; n++) {
+ chip = controller->chips[n];
+ if (chip)
+ mtd_device_unregister(&chip->nor.mtd);
+ }
+
+ return 0;
+}
+
+static int aspeed_smc_remove(struct platform_device *dev)
+{
+ return aspeed_smc_unregister(platform_get_drvdata(dev));
+}
+
+static const struct of_device_id aspeed_smc_matches[] = {
+ { .compatible = "aspeed,ast2400-fmc", .data = &fmc_2400_info },
+ { .compatible = "aspeed,ast2400-spi", .data = &spi_2400_info },
+ { .compatible = "aspeed,ast2500-fmc", .data = &fmc_2500_info },
+ { .compatible = "aspeed,ast2500-spi", .data = &spi_2500_info },
+ { }
+};
+MODULE_DEVICE_TABLE(of, aspeed_smc_matches);
+
+/*
+ * Each chip has a mapping window defined by a segment address
+ * register defining a start and an end address on the AHB bus. These
+ * addresses can be configured to fit the chip size and offer a
+ * contiguous memory region across chips. For the moment, we only
+ * check that each chip segment is valid.
+ */
+static void __iomem *aspeed_smc_chip_base(struct aspeed_smc_chip *chip,
+ struct resource *res)
+{
+ struct aspeed_smc_controller *controller = chip->controller;
+ u32 offset = 0;
+ u32 reg;
+
+ if (controller->info->nce > 1) {
+ reg = readl(SEGMENT_ADDR_REG(controller, chip->cs));
+
+ if (SEGMENT_ADDR_START(reg) >= SEGMENT_ADDR_END(reg))
+ return NULL;
+
+ offset = SEGMENT_ADDR_START(reg) - res->start;
+ }
+
+ return controller->ahb_base + offset;
+}
+
+static u32 aspeed_smc_ahb_base_phy(struct aspeed_smc_controller *controller)
+{
+ u32 seg0_val = readl(SEGMENT_ADDR_REG(controller, 0));
+
+ return SEGMENT_ADDR_START(seg0_val);
+}
+
+static u32 chip_set_segment(struct aspeed_smc_chip *chip, u32 cs, u32 start,
+ u32 size)
+{
+ struct aspeed_smc_controller *controller = chip->controller;
+ void __iomem *seg_reg;
+ u32 seg_oldval, seg_newval, ahb_base_phy, end;
+
+ ahb_base_phy = aspeed_smc_ahb_base_phy(controller);
+
+ seg_reg = SEGMENT_ADDR_REG(controller, cs);
+ seg_oldval = readl(seg_reg);
+
+ /*
+ * If the chip size is not specified, use the default segment
+ * size, but take into account the possible overlap with the
+ * previous segment
+ */
+ if (!size)
+ size = SEGMENT_ADDR_END(seg_oldval) - start;
+
+ /*
+ * The segment cannot exceed the maximum window size of the
+ * controller.
+ */
+ if (start + size > ahb_base_phy + controller->ahb_window_size) {
+ size = ahb_base_phy + controller->ahb_window_size - start;
+ dev_warn(chip->nor.dev, "CE%d window resized to %dMB",
+ cs, size >> 20);
+ }
+
+ end = start + size;
+ seg_newval = SEGMENT_ADDR_VALUE(start, end);
+ writel(seg_newval, seg_reg);
+
+ /*
+ * Restore default value if something goes wrong. The chip
+ * might have set some bogus value and we would loose access
+ * to the chip.
+ */
+ if (seg_newval != readl(seg_reg)) {
+ dev_err(chip->nor.dev, "CE%d window invalid", cs);
+ writel(seg_oldval, seg_reg);
+ start = SEGMENT_ADDR_START(seg_oldval);
+ end = SEGMENT_ADDR_END(seg_oldval);
+ size = end - start;
+ }
+
+ dev_info(chip->nor.dev, "CE%d window [ 0x%.8x - 0x%.8x ] %dMB",
+ cs, start, end, size >> 20);
+
+ return size;
+}
+
+/*
+ * The segment register defines the mapping window on the AHB bus and
+ * it needs to be configured depending on the chip size. The segment
+ * register of the following CE also needs to be tuned in order to
+ * provide a contiguous window across multiple chips.
+ *
+ * This is expected to be called in increasing CE order
+ */
+static u32 aspeed_smc_chip_set_segment(struct aspeed_smc_chip *chip)
+{
+ struct aspeed_smc_controller *controller = chip->controller;
+ u32 ahb_base_phy, start;
+ u32 size = chip->nor.mtd.size;
+
+ /*
+ * Each controller has a chip size limit for direct memory
+ * access
+ */
+ if (size > controller->info->maxsize)
+ size = controller->info->maxsize;
+
+ /*
+ * The AST2400 SPI controller only handles one chip and does
+ * not have segment registers. Let's use the chip size for the
+ * AHB window.
+ */
+ if (controller->info == &spi_2400_info)
+ goto out;
+
+ /*
+ * The AST2500 SPI controller has a HW bug when the CE0 chip
+ * size reaches 128MB. Enforce a size limit of 120MB to
+ * prevent the controller from using bogus settings in the
+ * segment register.
+ */
+ if (chip->cs == 0 && controller->info == &spi_2500_info &&
+ size == SZ_128M) {
+ size = 120 << 20;
+ dev_info(chip->nor.dev,
+ "CE%d window resized to %dMB (AST2500 HW quirk)",
+ chip->cs, size >> 20);
+ }
+
+ ahb_base_phy = aspeed_smc_ahb_base_phy(controller);
+
+ /*
+ * As a start address for the current segment, use the default
+ * start address if we are handling CE0 or use the previous
+ * segment ending address
+ */
+ if (chip->cs) {
+ u32 prev = readl(SEGMENT_ADDR_REG(controller, chip->cs - 1));
+
+ start = SEGMENT_ADDR_END(prev);
+ } else {
+ start = ahb_base_phy;
+ }
+
+ size = chip_set_segment(chip, chip->cs, start, size);
+
+ /* Update chip base address on the AHB bus */
+ chip->ahb_base = controller->ahb_base + (start - ahb_base_phy);
+
+ /*
+ * Now, make sure the next segment does not overlap with the
+ * current one we just configured, even if there is no
+ * available chip. That could break access in Command Mode.
+ */
+ if (chip->cs < controller->info->nce - 1)
+ chip_set_segment(chip, chip->cs + 1, start + size, 0);
+
+out:
+ if (size < chip->nor.mtd.size)
+ dev_warn(chip->nor.dev,
+ "CE%d window too small for chip %dMB",
+ chip->cs, (u32)chip->nor.mtd.size >> 20);
+
+ return size;
+}
+
+static void aspeed_smc_chip_enable_write(struct aspeed_smc_chip *chip)
+{
+ struct aspeed_smc_controller *controller = chip->controller;
+ u32 reg;
+
+ reg = readl(controller->regs + CONFIG_REG);
+
+ reg |= aspeed_smc_chip_write_bit(chip);
+ writel(reg, controller->regs + CONFIG_REG);
+}
+
+static void aspeed_smc_chip_set_type(struct aspeed_smc_chip *chip, int type)
+{
+ struct aspeed_smc_controller *controller = chip->controller;
+ u32 reg;
+
+ chip->type = type;
+
+ reg = readl(controller->regs + CONFIG_REG);
+ reg &= ~(3 << (chip->cs * 2));
+ reg |= chip->type << (chip->cs * 2);
+ writel(reg, controller->regs + CONFIG_REG);
+}
+
+/*
+ * The first chip of the AST2500 FMC flash controller is strapped by
+ * hardware, or autodetected, but other chips need to be set. Enforce
+ * the 4B setting for all chips.
+ */
+static void aspeed_smc_chip_set_4b(struct aspeed_smc_chip *chip)
+{
+ struct aspeed_smc_controller *controller = chip->controller;
+ u32 reg;
+
+ reg = readl(controller->regs + CE_CONTROL_REG);
+ reg |= 1 << chip->cs;
+ writel(reg, controller->regs + CE_CONTROL_REG);
+}
+
+/*
+ * The AST2400 SPI flash controller does not have a CE Control
+ * register. It uses the CE0 control register to set 4Byte mode at the
+ * controller level.
+ */
+static void aspeed_smc_chip_set_4b_spi_2400(struct aspeed_smc_chip *chip)
+{
+ chip->ctl_val[smc_base] |= CONTROL_IO_ADDRESS_4B;
+ chip->ctl_val[smc_read] |= CONTROL_IO_ADDRESS_4B;
+}
+
+static int aspeed_smc_chip_setup_init(struct aspeed_smc_chip *chip,
+ struct resource *res)
+{
+ struct aspeed_smc_controller *controller = chip->controller;
+ const struct aspeed_smc_info *info = controller->info;
+ u32 reg, base_reg;
+
+ /*
+ * Always turn on the write enable bit to allow opcodes to be
+ * sent in user mode.
+ */
+ aspeed_smc_chip_enable_write(chip);
+
+ /* The driver only supports SPI type flash */
+ if (info->hastype)
+ aspeed_smc_chip_set_type(chip, smc_type_spi);
+
+ /*
+ * Configure chip base address in memory
+ */
+ chip->ahb_base = aspeed_smc_chip_base(chip, res);
+ if (!chip->ahb_base) {
+ dev_warn(chip->nor.dev, "CE%d window closed", chip->cs);
+ return -EINVAL;
+ }
+
+ /*
+ * Get value of the inherited control register. U-Boot usually
+ * does some timing calibration on the FMC chip, so it's good
+ * to keep them. In the future, we should handle calibration
+ * from Linux.
+ */
+ reg = readl(chip->ctl);
+ dev_dbg(controller->dev, "control register: %08x\n", reg);
+
+ base_reg = reg & CONTROL_KEEP_MASK;
+ if (base_reg != reg) {
+ dev_dbg(controller->dev,
+ "control register changed to: %08x\n",
+ base_reg);
+ }
+ chip->ctl_val[smc_base] = base_reg;
+
+ /*
+ * Retain the prior value of the control register as the
+ * default if it was normal access mode. Otherwise start with
+ * the sanitized base value set to read mode.
+ */
+ if ((reg & CONTROL_COMMAND_MODE_MASK) ==
+ CONTROL_COMMAND_MODE_NORMAL)
+ chip->ctl_val[smc_read] = reg;
+ else
+ chip->ctl_val[smc_read] = chip->ctl_val[smc_base] |
+ CONTROL_COMMAND_MODE_NORMAL;
+
+ dev_dbg(controller->dev, "default control register: %08x\n",
+ chip->ctl_val[smc_read]);
+ return 0;
+}
+
+static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip)
+{
+ struct aspeed_smc_controller *controller = chip->controller;
+ const struct aspeed_smc_info *info = controller->info;
+ u32 cmd;
+
+ if (chip->nor.addr_width == 4 && info->set_4b)
+ info->set_4b(chip);
+
+ /* This is for direct AHB access when using Command Mode. */
+ chip->ahb_window_size = aspeed_smc_chip_set_segment(chip);
+
+ /*
+ * base mode has not been optimized yet. use it for writes.
+ */
+ chip->ctl_val[smc_write] = chip->ctl_val[smc_base] |
+ chip->nor.program_opcode << CONTROL_COMMAND_SHIFT |
+ CONTROL_COMMAND_MODE_WRITE;
+
+ dev_dbg(controller->dev, "write control register: %08x\n",
+ chip->ctl_val[smc_write]);
+
+ /*
+ * TODO: Adjust clocks if fast read is supported and interpret
+ * SPI-NOR flags to adjust controller settings.
+ */
+ if (chip->nor.read_proto == SNOR_PROTO_1_1_1) {
+ if (chip->nor.read_dummy == 0)
+ cmd = CONTROL_COMMAND_MODE_NORMAL;
+ else
+ cmd = CONTROL_COMMAND_MODE_FREAD;
+ } else {
+ dev_err(chip->nor.dev, "unsupported SPI read mode\n");
+ return -EINVAL;
+ }
+
+ chip->ctl_val[smc_read] |= cmd |
+ CONTROL_IO_DUMMY_SET(chip->nor.read_dummy / 8);
+
+ dev_dbg(controller->dev, "base control register: %08x\n",
+ chip->ctl_val[smc_read]);
+ return 0;
+}
+
+static const struct spi_nor_controller_ops aspeed_smc_controller_ops = {
+ .prepare = aspeed_smc_prep,
+ .unprepare = aspeed_smc_unprep,
+ .read_reg = aspeed_smc_read_reg,
+ .write_reg = aspeed_smc_write_reg,
+ .read = aspeed_smc_read_user,
+ .write = aspeed_smc_write_user,
+};
+
+static int aspeed_smc_setup_flash(struct aspeed_smc_controller *controller,
+ struct device_node *np, struct resource *r)
+{
+ const struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ |
+ SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_PP,
+ };
+ const struct aspeed_smc_info *info = controller->info;
+ struct device *dev = controller->dev;
+ struct device_node *child;
+ unsigned int cs;
+ int ret = -ENODEV;
+
+ for_each_available_child_of_node(np, child) {
+ struct aspeed_smc_chip *chip;
+ struct spi_nor *nor;
+ struct mtd_info *mtd;
+
+ /* This driver does not support NAND or NOR flash devices. */
+ if (!of_device_is_compatible(child, "jedec,spi-nor"))
+ continue;
+
+ ret = of_property_read_u32(child, "reg", &cs);
+ if (ret) {
+ dev_err(dev, "Couldn't not read chip select.\n");
+ break;
+ }
+
+ if (cs >= info->nce) {
+ dev_err(dev, "Chip select %d out of range.\n",
+ cs);
+ ret = -ERANGE;
+ break;
+ }
+
+ if (controller->chips[cs]) {
+ dev_err(dev, "Chip select %d already in use by %s\n",
+ cs, dev_name(controller->chips[cs]->nor.dev));
+ ret = -EBUSY;
+ break;
+ }
+
+ chip = devm_kzalloc(controller->dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip) {
+ ret = -ENOMEM;
+ break;
+ }
+
+ chip->controller = controller;
+ chip->ctl = controller->regs + info->ctl0 + cs * 4;
+ chip->cs = cs;
+
+ nor = &chip->nor;
+ mtd = &nor->mtd;
+
+ nor->dev = dev;
+ nor->priv = chip;
+ spi_nor_set_flash_node(nor, child);
+ nor->controller_ops = &aspeed_smc_controller_ops;
+
+ ret = aspeed_smc_chip_setup_init(chip, r);
+ if (ret)
+ break;
+
+ /*
+ * TODO: Add support for Dual and Quad SPI protocols
+ * attach when board support is present as determined
+ * by of property.
+ */
+ ret = spi_nor_scan(nor, NULL, &hwcaps);
+ if (ret)
+ break;
+
+ ret = aspeed_smc_chip_setup_finish(chip);
+ if (ret)
+ break;
+
+ ret = mtd_device_register(mtd, NULL, 0);
+ if (ret)
+ break;
+
+ controller->chips[cs] = chip;
+ }
+
+ if (ret) {
+ of_node_put(child);
+ aspeed_smc_unregister(controller);
+ }
+
+ return ret;
+}
+
+static int aspeed_smc_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ struct aspeed_smc_controller *controller;
+ const struct of_device_id *match;
+ const struct aspeed_smc_info *info;
+ struct resource *res;
+ int ret;
+
+ match = of_match_device(aspeed_smc_matches, &pdev->dev);
+ if (!match || !match->data)
+ return -ENODEV;
+ info = match->data;
+
+ controller = devm_kzalloc(&pdev->dev,
+ struct_size(controller, chips, info->nce),
+ GFP_KERNEL);
+ if (!controller)
+ return -ENOMEM;
+ controller->info = info;
+ controller->dev = dev;
+
+ mutex_init(&controller->mutex);
+ platform_set_drvdata(pdev, controller);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ controller->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(controller->regs))
+ return PTR_ERR(controller->regs);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ controller->ahb_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(controller->ahb_base))
+ return PTR_ERR(controller->ahb_base);
+
+ controller->ahb_window_size = resource_size(res);
+
+ ret = aspeed_smc_setup_flash(controller, np, res);
+ if (ret)
+ dev_err(dev, "Aspeed SMC probe failed %d\n", ret);
+
+ return ret;
+}
+
+static struct platform_driver aspeed_smc_driver = {
+ .probe = aspeed_smc_probe,
+ .remove = aspeed_smc_remove,
+ .driver = {
+ .name = DEVICE_NAME,
+ .of_match_table = aspeed_smc_matches,
+ }
+};
+
+module_platform_driver(aspeed_smc_driver);
+
+MODULE_DESCRIPTION("ASPEED Static Memory Controller Driver");
+MODULE_AUTHOR("Cedric Le Goater <clg@kaod.org>");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for Cadence QSPI Controller
+ *
+ * Copyright Altera Corporation (C) 2012-2014. All rights reserved.
+ */
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/spi-nor.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/sched.h>
+#include <linux/spi/spi.h>
+#include <linux/timer.h>
+
+#define CQSPI_NAME "cadence-qspi"
+#define CQSPI_MAX_CHIPSELECT 16
+
+/* Quirks */
+#define CQSPI_NEEDS_WR_DELAY BIT(0)
+
+/* Capabilities mask */
+#define CQSPI_BASE_HWCAPS_MASK \
+ (SNOR_HWCAPS_READ | SNOR_HWCAPS_READ_FAST | \
+ SNOR_HWCAPS_READ_1_1_2 | SNOR_HWCAPS_READ_1_1_4 | \
+ SNOR_HWCAPS_PP)
+
+struct cqspi_st;
+
+struct cqspi_flash_pdata {
+ struct spi_nor nor;
+ struct cqspi_st *cqspi;
+ u32 clk_rate;
+ u32 read_delay;
+ u32 tshsl_ns;
+ u32 tsd2d_ns;
+ u32 tchsh_ns;
+ u32 tslch_ns;
+ u8 inst_width;
+ u8 addr_width;
+ u8 data_width;
+ u8 cs;
+ bool registered;
+ bool use_direct_mode;
+};
+
+struct cqspi_st {
+ struct platform_device *pdev;
+
+ struct clk *clk;
+ unsigned int sclk;
+
+ void __iomem *iobase;
+ void __iomem *ahb_base;
+ resource_size_t ahb_size;
+ struct completion transfer_complete;
+ struct mutex bus_mutex;
+
+ struct dma_chan *rx_chan;
+ struct completion rx_dma_complete;
+ dma_addr_t mmap_phys_base;
+
+ int current_cs;
+ int current_page_size;
+ int current_erase_size;
+ int current_addr_width;
+ unsigned long master_ref_clk_hz;
+ bool is_decoded_cs;
+ u32 fifo_depth;
+ u32 fifo_width;
+ bool rclk_en;
+ u32 trigger_address;
+ u32 wr_delay;
+ struct cqspi_flash_pdata f_pdata[CQSPI_MAX_CHIPSELECT];
+};
+
+struct cqspi_driver_platdata {
+ u32 hwcaps_mask;
+ u8 quirks;
+};
+
+/* Operation timeout value */
+#define CQSPI_TIMEOUT_MS 500
+#define CQSPI_READ_TIMEOUT_MS 10
+
+/* Instruction type */
+#define CQSPI_INST_TYPE_SINGLE 0
+#define CQSPI_INST_TYPE_DUAL 1
+#define CQSPI_INST_TYPE_QUAD 2
+#define CQSPI_INST_TYPE_OCTAL 3
+
+#define CQSPI_DUMMY_CLKS_PER_BYTE 8
+#define CQSPI_DUMMY_BYTES_MAX 4
+#define CQSPI_DUMMY_CLKS_MAX 31
+
+#define CQSPI_STIG_DATA_LEN_MAX 8
+
+/* Register map */
+#define CQSPI_REG_CONFIG 0x00
+#define CQSPI_REG_CONFIG_ENABLE_MASK BIT(0)
+#define CQSPI_REG_CONFIG_ENB_DIR_ACC_CTRL BIT(7)
+#define CQSPI_REG_CONFIG_DECODE_MASK BIT(9)
+#define CQSPI_REG_CONFIG_CHIPSELECT_LSB 10
+#define CQSPI_REG_CONFIG_DMA_MASK BIT(15)
+#define CQSPI_REG_CONFIG_BAUD_LSB 19
+#define CQSPI_REG_CONFIG_IDLE_LSB 31
+#define CQSPI_REG_CONFIG_CHIPSELECT_MASK 0xF
+#define CQSPI_REG_CONFIG_BAUD_MASK 0xF
+
+#define CQSPI_REG_RD_INSTR 0x04
+#define CQSPI_REG_RD_INSTR_OPCODE_LSB 0
+#define CQSPI_REG_RD_INSTR_TYPE_INSTR_LSB 8
+#define CQSPI_REG_RD_INSTR_TYPE_ADDR_LSB 12
+#define CQSPI_REG_RD_INSTR_TYPE_DATA_LSB 16
+#define CQSPI_REG_RD_INSTR_MODE_EN_LSB 20
+#define CQSPI_REG_RD_INSTR_DUMMY_LSB 24
+#define CQSPI_REG_RD_INSTR_TYPE_INSTR_MASK 0x3
+#define CQSPI_REG_RD_INSTR_TYPE_ADDR_MASK 0x3
+#define CQSPI_REG_RD_INSTR_TYPE_DATA_MASK 0x3
+#define CQSPI_REG_RD_INSTR_DUMMY_MASK 0x1F
+
+#define CQSPI_REG_WR_INSTR 0x08
+#define CQSPI_REG_WR_INSTR_OPCODE_LSB 0
+#define CQSPI_REG_WR_INSTR_TYPE_ADDR_LSB 12
+#define CQSPI_REG_WR_INSTR_TYPE_DATA_LSB 16
+
+#define CQSPI_REG_DELAY 0x0C
+#define CQSPI_REG_DELAY_TSLCH_LSB 0
+#define CQSPI_REG_DELAY_TCHSH_LSB 8
+#define CQSPI_REG_DELAY_TSD2D_LSB 16
+#define CQSPI_REG_DELAY_TSHSL_LSB 24
+#define CQSPI_REG_DELAY_TSLCH_MASK 0xFF
+#define CQSPI_REG_DELAY_TCHSH_MASK 0xFF
+#define CQSPI_REG_DELAY_TSD2D_MASK 0xFF
+#define CQSPI_REG_DELAY_TSHSL_MASK 0xFF
+
+#define CQSPI_REG_READCAPTURE 0x10
+#define CQSPI_REG_READCAPTURE_BYPASS_LSB 0
+#define CQSPI_REG_READCAPTURE_DELAY_LSB 1
+#define CQSPI_REG_READCAPTURE_DELAY_MASK 0xF
+
+#define CQSPI_REG_SIZE 0x14
+#define CQSPI_REG_SIZE_ADDRESS_LSB 0
+#define CQSPI_REG_SIZE_PAGE_LSB 4
+#define CQSPI_REG_SIZE_BLOCK_LSB 16
+#define CQSPI_REG_SIZE_ADDRESS_MASK 0xF
+#define CQSPI_REG_SIZE_PAGE_MASK 0xFFF
+#define CQSPI_REG_SIZE_BLOCK_MASK 0x3F
+
+#define CQSPI_REG_SRAMPARTITION 0x18
+#define CQSPI_REG_INDIRECTTRIGGER 0x1C
+
+#define CQSPI_REG_DMA 0x20
+#define CQSPI_REG_DMA_SINGLE_LSB 0
+#define CQSPI_REG_DMA_BURST_LSB 8
+#define CQSPI_REG_DMA_SINGLE_MASK 0xFF
+#define CQSPI_REG_DMA_BURST_MASK 0xFF
+
+#define CQSPI_REG_REMAP 0x24
+#define CQSPI_REG_MODE_BIT 0x28
+
+#define CQSPI_REG_SDRAMLEVEL 0x2C
+#define CQSPI_REG_SDRAMLEVEL_RD_LSB 0
+#define CQSPI_REG_SDRAMLEVEL_WR_LSB 16
+#define CQSPI_REG_SDRAMLEVEL_RD_MASK 0xFFFF
+#define CQSPI_REG_SDRAMLEVEL_WR_MASK 0xFFFF
+
+#define CQSPI_REG_IRQSTATUS 0x40
+#define CQSPI_REG_IRQMASK 0x44
+
+#define CQSPI_REG_INDIRECTRD 0x60
+#define CQSPI_REG_INDIRECTRD_START_MASK BIT(0)
+#define CQSPI_REG_INDIRECTRD_CANCEL_MASK BIT(1)
+#define CQSPI_REG_INDIRECTRD_DONE_MASK BIT(5)
+
+#define CQSPI_REG_INDIRECTRDWATERMARK 0x64
+#define CQSPI_REG_INDIRECTRDSTARTADDR 0x68
+#define CQSPI_REG_INDIRECTRDBYTES 0x6C
+
+#define CQSPI_REG_CMDCTRL 0x90
+#define CQSPI_REG_CMDCTRL_EXECUTE_MASK BIT(0)
+#define CQSPI_REG_CMDCTRL_INPROGRESS_MASK BIT(1)
+#define CQSPI_REG_CMDCTRL_WR_BYTES_LSB 12
+#define CQSPI_REG_CMDCTRL_WR_EN_LSB 15
+#define CQSPI_REG_CMDCTRL_ADD_BYTES_LSB 16
+#define CQSPI_REG_CMDCTRL_ADDR_EN_LSB 19
+#define CQSPI_REG_CMDCTRL_RD_BYTES_LSB 20
+#define CQSPI_REG_CMDCTRL_RD_EN_LSB 23
+#define CQSPI_REG_CMDCTRL_OPCODE_LSB 24
+#define CQSPI_REG_CMDCTRL_WR_BYTES_MASK 0x7
+#define CQSPI_REG_CMDCTRL_ADD_BYTES_MASK 0x3
+#define CQSPI_REG_CMDCTRL_RD_BYTES_MASK 0x7
+
+#define CQSPI_REG_INDIRECTWR 0x70
+#define CQSPI_REG_INDIRECTWR_START_MASK BIT(0)
+#define CQSPI_REG_INDIRECTWR_CANCEL_MASK BIT(1)
+#define CQSPI_REG_INDIRECTWR_DONE_MASK BIT(5)
+
+#define CQSPI_REG_INDIRECTWRWATERMARK 0x74
+#define CQSPI_REG_INDIRECTWRSTARTADDR 0x78
+#define CQSPI_REG_INDIRECTWRBYTES 0x7C
+
+#define CQSPI_REG_CMDADDRESS 0x94
+#define CQSPI_REG_CMDREADDATALOWER 0xA0
+#define CQSPI_REG_CMDREADDATAUPPER 0xA4
+#define CQSPI_REG_CMDWRITEDATALOWER 0xA8
+#define CQSPI_REG_CMDWRITEDATAUPPER 0xAC
+
+/* Interrupt status bits */
+#define CQSPI_REG_IRQ_MODE_ERR BIT(0)
+#define CQSPI_REG_IRQ_UNDERFLOW BIT(1)
+#define CQSPI_REG_IRQ_IND_COMP BIT(2)
+#define CQSPI_REG_IRQ_IND_RD_REJECT BIT(3)
+#define CQSPI_REG_IRQ_WR_PROTECTED_ERR BIT(4)
+#define CQSPI_REG_IRQ_ILLEGAL_AHB_ERR BIT(5)
+#define CQSPI_REG_IRQ_WATERMARK BIT(6)
+#define CQSPI_REG_IRQ_IND_SRAM_FULL BIT(12)
+
+#define CQSPI_IRQ_MASK_RD (CQSPI_REG_IRQ_WATERMARK | \
+ CQSPI_REG_IRQ_IND_SRAM_FULL | \
+ CQSPI_REG_IRQ_IND_COMP)
+
+#define CQSPI_IRQ_MASK_WR (CQSPI_REG_IRQ_IND_COMP | \
+ CQSPI_REG_IRQ_WATERMARK | \
+ CQSPI_REG_IRQ_UNDERFLOW)
+
+#define CQSPI_IRQ_STATUS_MASK 0x1FFFF
+
+static int cqspi_wait_for_bit(void __iomem *reg, const u32 mask, bool clr)
+{
+ u32 val;
+
+ return readl_relaxed_poll_timeout(reg, val,
+ (((clr ? ~val : val) & mask) == mask),
+ 10, CQSPI_TIMEOUT_MS * 1000);
+}
+
+static bool cqspi_is_idle(struct cqspi_st *cqspi)
+{
+ u32 reg = readl(cqspi->iobase + CQSPI_REG_CONFIG);
+
+ return reg & (1 << CQSPI_REG_CONFIG_IDLE_LSB);
+}
+
+static u32 cqspi_get_rd_sram_level(struct cqspi_st *cqspi)
+{
+ u32 reg = readl(cqspi->iobase + CQSPI_REG_SDRAMLEVEL);
+
+ reg >>= CQSPI_REG_SDRAMLEVEL_RD_LSB;
+ return reg & CQSPI_REG_SDRAMLEVEL_RD_MASK;
+}
+
+static irqreturn_t cqspi_irq_handler(int this_irq, void *dev)
+{
+ struct cqspi_st *cqspi = dev;
+ unsigned int irq_status;
+
+ /* Read interrupt status */
+ irq_status = readl(cqspi->iobase + CQSPI_REG_IRQSTATUS);
+
+ /* Clear interrupt */
+ writel(irq_status, cqspi->iobase + CQSPI_REG_IRQSTATUS);
+
+ irq_status &= CQSPI_IRQ_MASK_RD | CQSPI_IRQ_MASK_WR;
+
+ if (irq_status)
+ complete(&cqspi->transfer_complete);
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int cqspi_calc_rdreg(struct spi_nor *nor)
+{
+ struct cqspi_flash_pdata *f_pdata = nor->priv;
+ u32 rdreg = 0;
+
+ rdreg |= f_pdata->inst_width << CQSPI_REG_RD_INSTR_TYPE_INSTR_LSB;
+ rdreg |= f_pdata->addr_width << CQSPI_REG_RD_INSTR_TYPE_ADDR_LSB;
+ rdreg |= f_pdata->data_width << CQSPI_REG_RD_INSTR_TYPE_DATA_LSB;
+
+ return rdreg;
+}
+
+static int cqspi_wait_idle(struct cqspi_st *cqspi)
+{
+ const unsigned int poll_idle_retry = 3;
+ unsigned int count = 0;
+ unsigned long timeout;
+
+ timeout = jiffies + msecs_to_jiffies(CQSPI_TIMEOUT_MS);
+ while (1) {
+ /*
+ * Read few times in succession to ensure the controller
+ * is indeed idle, that is, the bit does not transition
+ * low again.
+ */
+ if (cqspi_is_idle(cqspi))
+ count++;
+ else
+ count = 0;
+
+ if (count >= poll_idle_retry)
+ return 0;
+
+ if (time_after(jiffies, timeout)) {
+ /* Timeout, in busy mode. */
+ dev_err(&cqspi->pdev->dev,
+ "QSPI is still busy after %dms timeout.\n",
+ CQSPI_TIMEOUT_MS);
+ return -ETIMEDOUT;
+ }
+
+ cpu_relax();
+ }
+}
+
+static int cqspi_exec_flash_cmd(struct cqspi_st *cqspi, unsigned int reg)
+{
+ void __iomem *reg_base = cqspi->iobase;
+ int ret;
+
+ /* Write the CMDCTRL without start execution. */
+ writel(reg, reg_base + CQSPI_REG_CMDCTRL);
+ /* Start execute */
+ reg |= CQSPI_REG_CMDCTRL_EXECUTE_MASK;
+ writel(reg, reg_base + CQSPI_REG_CMDCTRL);
+
+ /* Polling for completion. */
+ ret = cqspi_wait_for_bit(reg_base + CQSPI_REG_CMDCTRL,
+ CQSPI_REG_CMDCTRL_INPROGRESS_MASK, 1);
+ if (ret) {
+ dev_err(&cqspi->pdev->dev,
+ "Flash command execution timed out.\n");
+ return ret;
+ }
+
+ /* Polling QSPI idle status. */
+ return cqspi_wait_idle(cqspi);
+}
+
+static int cqspi_command_read(struct spi_nor *nor, u8 opcode,
+ u8 *rxbuf, size_t n_rx)
+{
+ struct cqspi_flash_pdata *f_pdata = nor->priv;
+ struct cqspi_st *cqspi = f_pdata->cqspi;
+ void __iomem *reg_base = cqspi->iobase;
+ unsigned int rdreg;
+ unsigned int reg;
+ size_t read_len;
+ int status;
+
+ if (!n_rx || n_rx > CQSPI_STIG_DATA_LEN_MAX || !rxbuf) {
+ dev_err(nor->dev,
+ "Invalid input argument, len %zu rxbuf 0x%p\n",
+ n_rx, rxbuf);
+ return -EINVAL;
+ }
+
+ reg = opcode << CQSPI_REG_CMDCTRL_OPCODE_LSB;
+
+ rdreg = cqspi_calc_rdreg(nor);
+ writel(rdreg, reg_base + CQSPI_REG_RD_INSTR);
+
+ reg |= (0x1 << CQSPI_REG_CMDCTRL_RD_EN_LSB);
+
+ /* 0 means 1 byte. */
+ reg |= (((n_rx - 1) & CQSPI_REG_CMDCTRL_RD_BYTES_MASK)
+ << CQSPI_REG_CMDCTRL_RD_BYTES_LSB);
+ status = cqspi_exec_flash_cmd(cqspi, reg);
+ if (status)
+ return status;
+
+ reg = readl(reg_base + CQSPI_REG_CMDREADDATALOWER);
+
+ /* Put the read value into rx_buf */
+ read_len = (n_rx > 4) ? 4 : n_rx;
+ memcpy(rxbuf, ®, read_len);
+ rxbuf += read_len;
+
+ if (n_rx > 4) {
+ reg = readl(reg_base + CQSPI_REG_CMDREADDATAUPPER);
+
+ read_len = n_rx - read_len;
+ memcpy(rxbuf, ®, read_len);
+ }
+
+ return 0;
+}
+
+static int cqspi_command_write(struct spi_nor *nor, const u8 opcode,
+ const u8 *txbuf, size_t n_tx)
+{
+ struct cqspi_flash_pdata *f_pdata = nor->priv;
+ struct cqspi_st *cqspi = f_pdata->cqspi;
+ void __iomem *reg_base = cqspi->iobase;
+ unsigned int reg;
+ unsigned int data;
+ size_t write_len;
+ int ret;
+
+ if (n_tx > CQSPI_STIG_DATA_LEN_MAX || (n_tx && !txbuf)) {
+ dev_err(nor->dev,
+ "Invalid input argument, cmdlen %zu txbuf 0x%p\n",
+ n_tx, txbuf);
+ return -EINVAL;
+ }
+
+ reg = opcode << CQSPI_REG_CMDCTRL_OPCODE_LSB;
+ if (n_tx) {
+ reg |= (0x1 << CQSPI_REG_CMDCTRL_WR_EN_LSB);
+ reg |= ((n_tx - 1) & CQSPI_REG_CMDCTRL_WR_BYTES_MASK)
+ << CQSPI_REG_CMDCTRL_WR_BYTES_LSB;
+ data = 0;
+ write_len = (n_tx > 4) ? 4 : n_tx;
+ memcpy(&data, txbuf, write_len);
+ txbuf += write_len;
+ writel(data, reg_base + CQSPI_REG_CMDWRITEDATALOWER);
+
+ if (n_tx > 4) {
+ data = 0;
+ write_len = n_tx - 4;
+ memcpy(&data, txbuf, write_len);
+ writel(data, reg_base + CQSPI_REG_CMDWRITEDATAUPPER);
+ }
+ }
+ ret = cqspi_exec_flash_cmd(cqspi, reg);
+ return ret;
+}
+
+static int cqspi_command_write_addr(struct spi_nor *nor,
+ const u8 opcode, const unsigned int addr)
+{
+ struct cqspi_flash_pdata *f_pdata = nor->priv;
+ struct cqspi_st *cqspi = f_pdata->cqspi;
+ void __iomem *reg_base = cqspi->iobase;
+ unsigned int reg;
+
+ reg = opcode << CQSPI_REG_CMDCTRL_OPCODE_LSB;
+ reg |= (0x1 << CQSPI_REG_CMDCTRL_ADDR_EN_LSB);
+ reg |= ((nor->addr_width - 1) & CQSPI_REG_CMDCTRL_ADD_BYTES_MASK)
+ << CQSPI_REG_CMDCTRL_ADD_BYTES_LSB;
+
+ writel(addr, reg_base + CQSPI_REG_CMDADDRESS);
+
+ return cqspi_exec_flash_cmd(cqspi, reg);
+}
+
+static int cqspi_read_setup(struct spi_nor *nor)
+{
+ struct cqspi_flash_pdata *f_pdata = nor->priv;
+ struct cqspi_st *cqspi = f_pdata->cqspi;
+ void __iomem *reg_base = cqspi->iobase;
+ unsigned int dummy_clk = 0;
+ unsigned int reg;
+
+ reg = nor->read_opcode << CQSPI_REG_RD_INSTR_OPCODE_LSB;
+ reg |= cqspi_calc_rdreg(nor);
+
+ /* Setup dummy clock cycles */
+ dummy_clk = nor->read_dummy;
+ if (dummy_clk > CQSPI_DUMMY_CLKS_MAX)
+ dummy_clk = CQSPI_DUMMY_CLKS_MAX;
+
+ if (dummy_clk / 8) {
+ reg |= (1 << CQSPI_REG_RD_INSTR_MODE_EN_LSB);
+ /* Set mode bits high to ensure chip doesn't enter XIP */
+ writel(0xFF, reg_base + CQSPI_REG_MODE_BIT);
+
+ /* Need to subtract the mode byte (8 clocks). */
+ if (f_pdata->inst_width != CQSPI_INST_TYPE_QUAD)
+ dummy_clk -= 8;
+
+ if (dummy_clk)
+ reg |= (dummy_clk & CQSPI_REG_RD_INSTR_DUMMY_MASK)
+ << CQSPI_REG_RD_INSTR_DUMMY_LSB;
+ }
+
+ writel(reg, reg_base + CQSPI_REG_RD_INSTR);
+
+ /* Set address width */
+ reg = readl(reg_base + CQSPI_REG_SIZE);
+ reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK;
+ reg |= (nor->addr_width - 1);
+ writel(reg, reg_base + CQSPI_REG_SIZE);
+ return 0;
+}
+
+static int cqspi_indirect_read_execute(struct spi_nor *nor, u8 *rxbuf,
+ loff_t from_addr, const size_t n_rx)
+{
+ struct cqspi_flash_pdata *f_pdata = nor->priv;
+ struct cqspi_st *cqspi = f_pdata->cqspi;
+ void __iomem *reg_base = cqspi->iobase;
+ void __iomem *ahb_base = cqspi->ahb_base;
+ unsigned int remaining = n_rx;
+ unsigned int mod_bytes = n_rx % 4;
+ unsigned int bytes_to_read = 0;
+ u8 *rxbuf_end = rxbuf + n_rx;
+ int ret = 0;
+
+ writel(from_addr, reg_base + CQSPI_REG_INDIRECTRDSTARTADDR);
+ writel(remaining, reg_base + CQSPI_REG_INDIRECTRDBYTES);
+
+ /* Clear all interrupts. */
+ writel(CQSPI_IRQ_STATUS_MASK, reg_base + CQSPI_REG_IRQSTATUS);
+
+ writel(CQSPI_IRQ_MASK_RD, reg_base + CQSPI_REG_IRQMASK);
+
+ reinit_completion(&cqspi->transfer_complete);
+ writel(CQSPI_REG_INDIRECTRD_START_MASK,
+ reg_base + CQSPI_REG_INDIRECTRD);
+
+ while (remaining > 0) {
+ if (!wait_for_completion_timeout(&cqspi->transfer_complete,
+ msecs_to_jiffies(CQSPI_READ_TIMEOUT_MS)))
+ ret = -ETIMEDOUT;
+
+ bytes_to_read = cqspi_get_rd_sram_level(cqspi);
+
+ if (ret && bytes_to_read == 0) {
+ dev_err(nor->dev, "Indirect read timeout, no bytes\n");
+ goto failrd;
+ }
+
+ while (bytes_to_read != 0) {
+ unsigned int word_remain = round_down(remaining, 4);
+
+ bytes_to_read *= cqspi->fifo_width;
+ bytes_to_read = bytes_to_read > remaining ?
+ remaining : bytes_to_read;
+ bytes_to_read = round_down(bytes_to_read, 4);
+ /* Read 4 byte word chunks then single bytes */
+ if (bytes_to_read) {
+ ioread32_rep(ahb_base, rxbuf,
+ (bytes_to_read / 4));
+ } else if (!word_remain && mod_bytes) {
+ unsigned int temp = ioread32(ahb_base);
+
+ bytes_to_read = mod_bytes;
+ memcpy(rxbuf, &temp, min((unsigned int)
+ (rxbuf_end - rxbuf),
+ bytes_to_read));
+ }
+ rxbuf += bytes_to_read;
+ remaining -= bytes_to_read;
+ bytes_to_read = cqspi_get_rd_sram_level(cqspi);
+ }
+
+ if (remaining > 0)
+ reinit_completion(&cqspi->transfer_complete);
+ }
+
+ /* Check indirect done status */
+ ret = cqspi_wait_for_bit(reg_base + CQSPI_REG_INDIRECTRD,
+ CQSPI_REG_INDIRECTRD_DONE_MASK, 0);
+ if (ret) {
+ dev_err(nor->dev,
+ "Indirect read completion error (%i)\n", ret);
+ goto failrd;
+ }
+
+ /* Disable interrupt */
+ writel(0, reg_base + CQSPI_REG_IRQMASK);
+
+ /* Clear indirect completion status */
+ writel(CQSPI_REG_INDIRECTRD_DONE_MASK, reg_base + CQSPI_REG_INDIRECTRD);
+
+ return 0;
+
+failrd:
+ /* Disable interrupt */
+ writel(0, reg_base + CQSPI_REG_IRQMASK);
+
+ /* Cancel the indirect read */
+ writel(CQSPI_REG_INDIRECTWR_CANCEL_MASK,
+ reg_base + CQSPI_REG_INDIRECTRD);
+ return ret;
+}
+
+static int cqspi_write_setup(struct spi_nor *nor)
+{
+ unsigned int reg;
+ struct cqspi_flash_pdata *f_pdata = nor->priv;
+ struct cqspi_st *cqspi = f_pdata->cqspi;
+ void __iomem *reg_base = cqspi->iobase;
+
+ /* Set opcode. */
+ reg = nor->program_opcode << CQSPI_REG_WR_INSTR_OPCODE_LSB;
+ writel(reg, reg_base + CQSPI_REG_WR_INSTR);
+ reg = cqspi_calc_rdreg(nor);
+ writel(reg, reg_base + CQSPI_REG_RD_INSTR);
+
+ reg = readl(reg_base + CQSPI_REG_SIZE);
+ reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK;
+ reg |= (nor->addr_width - 1);
+ writel(reg, reg_base + CQSPI_REG_SIZE);
+ return 0;
+}
+
+static int cqspi_indirect_write_execute(struct spi_nor *nor, loff_t to_addr,
+ const u8 *txbuf, const size_t n_tx)
+{
+ const unsigned int page_size = nor->page_size;
+ struct cqspi_flash_pdata *f_pdata = nor->priv;
+ struct cqspi_st *cqspi = f_pdata->cqspi;
+ void __iomem *reg_base = cqspi->iobase;
+ unsigned int remaining = n_tx;
+ unsigned int write_bytes;
+ int ret;
+
+ writel(to_addr, reg_base + CQSPI_REG_INDIRECTWRSTARTADDR);
+ writel(remaining, reg_base + CQSPI_REG_INDIRECTWRBYTES);
+
+ /* Clear all interrupts. */
+ writel(CQSPI_IRQ_STATUS_MASK, reg_base + CQSPI_REG_IRQSTATUS);
+
+ writel(CQSPI_IRQ_MASK_WR, reg_base + CQSPI_REG_IRQMASK);
+
+ reinit_completion(&cqspi->transfer_complete);
+ writel(CQSPI_REG_INDIRECTWR_START_MASK,
+ reg_base + CQSPI_REG_INDIRECTWR);
+ /*
+ * As per 66AK2G02 TRM SPRUHY8F section 11.15.5.3 Indirect Access
+ * Controller programming sequence, couple of cycles of
+ * QSPI_REF_CLK delay is required for the above bit to
+ * be internally synchronized by the QSPI module. Provide 5
+ * cycles of delay.
+ */
+ if (cqspi->wr_delay)
+ ndelay(cqspi->wr_delay);
+
+ while (remaining > 0) {
+ size_t write_words, mod_bytes;
+
+ write_bytes = remaining > page_size ? page_size : remaining;
+ write_words = write_bytes / 4;
+ mod_bytes = write_bytes % 4;
+ /* Write 4 bytes at a time then single bytes. */
+ if (write_words) {
+ iowrite32_rep(cqspi->ahb_base, txbuf, write_words);
+ txbuf += (write_words * 4);
+ }
+ if (mod_bytes) {
+ unsigned int temp = 0xFFFFFFFF;
+
+ memcpy(&temp, txbuf, mod_bytes);
+ iowrite32(temp, cqspi->ahb_base);
+ txbuf += mod_bytes;
+ }
+
+ if (!wait_for_completion_timeout(&cqspi->transfer_complete,
+ msecs_to_jiffies(CQSPI_TIMEOUT_MS))) {
+ dev_err(nor->dev, "Indirect write timeout\n");
+ ret = -ETIMEDOUT;
+ goto failwr;
+ }
+
+ remaining -= write_bytes;
+
+ if (remaining > 0)
+ reinit_completion(&cqspi->transfer_complete);
+ }
+
+ /* Check indirect done status */
+ ret = cqspi_wait_for_bit(reg_base + CQSPI_REG_INDIRECTWR,
+ CQSPI_REG_INDIRECTWR_DONE_MASK, 0);
+ if (ret) {
+ dev_err(nor->dev,
+ "Indirect write completion error (%i)\n", ret);
+ goto failwr;
+ }
+
+ /* Disable interrupt. */
+ writel(0, reg_base + CQSPI_REG_IRQMASK);
+
+ /* Clear indirect completion status */
+ writel(CQSPI_REG_INDIRECTWR_DONE_MASK, reg_base + CQSPI_REG_INDIRECTWR);
+
+ cqspi_wait_idle(cqspi);
+
+ return 0;
+
+failwr:
+ /* Disable interrupt. */
+ writel(0, reg_base + CQSPI_REG_IRQMASK);
+
+ /* Cancel the indirect write */
+ writel(CQSPI_REG_INDIRECTWR_CANCEL_MASK,
+ reg_base + CQSPI_REG_INDIRECTWR);
+ return ret;
+}
+
+static void cqspi_chipselect(struct spi_nor *nor)
+{
+ struct cqspi_flash_pdata *f_pdata = nor->priv;
+ struct cqspi_st *cqspi = f_pdata->cqspi;
+ void __iomem *reg_base = cqspi->iobase;
+ unsigned int chip_select = f_pdata->cs;
+ unsigned int reg;
+
+ reg = readl(reg_base + CQSPI_REG_CONFIG);
+ if (cqspi->is_decoded_cs) {
+ reg |= CQSPI_REG_CONFIG_DECODE_MASK;
+ } else {
+ reg &= ~CQSPI_REG_CONFIG_DECODE_MASK;
+
+ /* Convert CS if without decoder.
+ * CS0 to 4b'1110
+ * CS1 to 4b'1101
+ * CS2 to 4b'1011
+ * CS3 to 4b'0111
+ */
+ chip_select = 0xF & ~(1 << chip_select);
+ }
+
+ reg &= ~(CQSPI_REG_CONFIG_CHIPSELECT_MASK
+ << CQSPI_REG_CONFIG_CHIPSELECT_LSB);
+ reg |= (chip_select & CQSPI_REG_CONFIG_CHIPSELECT_MASK)
+ << CQSPI_REG_CONFIG_CHIPSELECT_LSB;
+ writel(reg, reg_base + CQSPI_REG_CONFIG);
+}
+
+static void cqspi_configure_cs_and_sizes(struct spi_nor *nor)
+{
+ struct cqspi_flash_pdata *f_pdata = nor->priv;
+ struct cqspi_st *cqspi = f_pdata->cqspi;
+ void __iomem *iobase = cqspi->iobase;
+ unsigned int reg;
+
+ /* configure page size and block size. */
+ reg = readl(iobase + CQSPI_REG_SIZE);
+ reg &= ~(CQSPI_REG_SIZE_PAGE_MASK << CQSPI_REG_SIZE_PAGE_LSB);
+ reg &= ~(CQSPI_REG_SIZE_BLOCK_MASK << CQSPI_REG_SIZE_BLOCK_LSB);
+ reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK;
+ reg |= (nor->page_size << CQSPI_REG_SIZE_PAGE_LSB);
+ reg |= (ilog2(nor->mtd.erasesize) << CQSPI_REG_SIZE_BLOCK_LSB);
+ reg |= (nor->addr_width - 1);
+ writel(reg, iobase + CQSPI_REG_SIZE);
+
+ /* configure the chip select */
+ cqspi_chipselect(nor);
+
+ /* Store the new configuration of the controller */
+ cqspi->current_page_size = nor->page_size;
+ cqspi->current_erase_size = nor->mtd.erasesize;
+ cqspi->current_addr_width = nor->addr_width;
+}
+
+static unsigned int calculate_ticks_for_ns(const unsigned int ref_clk_hz,
+ const unsigned int ns_val)
+{
+ unsigned int ticks;
+
+ ticks = ref_clk_hz / 1000; /* kHz */
+ ticks = DIV_ROUND_UP(ticks * ns_val, 1000000);
+
+ return ticks;
+}
+
+static void cqspi_delay(struct spi_nor *nor)
+{
+ struct cqspi_flash_pdata *f_pdata = nor->priv;
+ struct cqspi_st *cqspi = f_pdata->cqspi;
+ void __iomem *iobase = cqspi->iobase;
+ const unsigned int ref_clk_hz = cqspi->master_ref_clk_hz;
+ unsigned int tshsl, tchsh, tslch, tsd2d;
+ unsigned int reg;
+ unsigned int tsclk;
+
+ /* calculate the number of ref ticks for one sclk tick */
+ tsclk = DIV_ROUND_UP(ref_clk_hz, cqspi->sclk);
+
+ tshsl = calculate_ticks_for_ns(ref_clk_hz, f_pdata->tshsl_ns);
+ /* this particular value must be at least one sclk */
+ if (tshsl < tsclk)
+ tshsl = tsclk;
+
+ tchsh = calculate_ticks_for_ns(ref_clk_hz, f_pdata->tchsh_ns);
+ tslch = calculate_ticks_for_ns(ref_clk_hz, f_pdata->tslch_ns);
+ tsd2d = calculate_ticks_for_ns(ref_clk_hz, f_pdata->tsd2d_ns);
+
+ reg = (tshsl & CQSPI_REG_DELAY_TSHSL_MASK)
+ << CQSPI_REG_DELAY_TSHSL_LSB;
+ reg |= (tchsh & CQSPI_REG_DELAY_TCHSH_MASK)
+ << CQSPI_REG_DELAY_TCHSH_LSB;
+ reg |= (tslch & CQSPI_REG_DELAY_TSLCH_MASK)
+ << CQSPI_REG_DELAY_TSLCH_LSB;
+ reg |= (tsd2d & CQSPI_REG_DELAY_TSD2D_MASK)
+ << CQSPI_REG_DELAY_TSD2D_LSB;
+ writel(reg, iobase + CQSPI_REG_DELAY);
+}
+
+static void cqspi_config_baudrate_div(struct cqspi_st *cqspi)
+{
+ const unsigned int ref_clk_hz = cqspi->master_ref_clk_hz;
+ void __iomem *reg_base = cqspi->iobase;
+ u32 reg, div;
+
+ /* Recalculate the baudrate divisor based on QSPI specification. */
+ div = DIV_ROUND_UP(ref_clk_hz, 2 * cqspi->sclk) - 1;
+
+ reg = readl(reg_base + CQSPI_REG_CONFIG);
+ reg &= ~(CQSPI_REG_CONFIG_BAUD_MASK << CQSPI_REG_CONFIG_BAUD_LSB);
+ reg |= (div & CQSPI_REG_CONFIG_BAUD_MASK) << CQSPI_REG_CONFIG_BAUD_LSB;
+ writel(reg, reg_base + CQSPI_REG_CONFIG);
+}
+
+static void cqspi_readdata_capture(struct cqspi_st *cqspi,
+ const bool bypass,
+ const unsigned int delay)
+{
+ void __iomem *reg_base = cqspi->iobase;
+ unsigned int reg;
+
+ reg = readl(reg_base + CQSPI_REG_READCAPTURE);
+
+ if (bypass)
+ reg |= (1 << CQSPI_REG_READCAPTURE_BYPASS_LSB);
+ else
+ reg &= ~(1 << CQSPI_REG_READCAPTURE_BYPASS_LSB);
+
+ reg &= ~(CQSPI_REG_READCAPTURE_DELAY_MASK
+ << CQSPI_REG_READCAPTURE_DELAY_LSB);
+
+ reg |= (delay & CQSPI_REG_READCAPTURE_DELAY_MASK)
+ << CQSPI_REG_READCAPTURE_DELAY_LSB;
+
+ writel(reg, reg_base + CQSPI_REG_READCAPTURE);
+}
+
+static void cqspi_controller_enable(struct cqspi_st *cqspi, bool enable)
+{
+ void __iomem *reg_base = cqspi->iobase;
+ unsigned int reg;
+
+ reg = readl(reg_base + CQSPI_REG_CONFIG);
+
+ if (enable)
+ reg |= CQSPI_REG_CONFIG_ENABLE_MASK;
+ else
+ reg &= ~CQSPI_REG_CONFIG_ENABLE_MASK;
+
+ writel(reg, reg_base + CQSPI_REG_CONFIG);
+}
+
+static void cqspi_configure(struct spi_nor *nor)
+{
+ struct cqspi_flash_pdata *f_pdata = nor->priv;
+ struct cqspi_st *cqspi = f_pdata->cqspi;
+ const unsigned int sclk = f_pdata->clk_rate;
+ int switch_cs = (cqspi->current_cs != f_pdata->cs);
+ int switch_ck = (cqspi->sclk != sclk);
+
+ if ((cqspi->current_page_size != nor->page_size) ||
+ (cqspi->current_erase_size != nor->mtd.erasesize) ||
+ (cqspi->current_addr_width != nor->addr_width))
+ switch_cs = 1;
+
+ if (switch_cs || switch_ck)
+ cqspi_controller_enable(cqspi, 0);
+
+ /* Switch chip select. */
+ if (switch_cs) {
+ cqspi->current_cs = f_pdata->cs;
+ cqspi_configure_cs_and_sizes(nor);
+ }
+
+ /* Setup baudrate divisor and delays */
+ if (switch_ck) {
+ cqspi->sclk = sclk;
+ cqspi_config_baudrate_div(cqspi);
+ cqspi_delay(nor);
+ cqspi_readdata_capture(cqspi, !cqspi->rclk_en,
+ f_pdata->read_delay);
+ }
+
+ if (switch_cs || switch_ck)
+ cqspi_controller_enable(cqspi, 1);
+}
+
+static int cqspi_set_protocol(struct spi_nor *nor, const int read)
+{
+ struct cqspi_flash_pdata *f_pdata = nor->priv;
+
+ f_pdata->inst_width = CQSPI_INST_TYPE_SINGLE;
+ f_pdata->addr_width = CQSPI_INST_TYPE_SINGLE;
+ f_pdata->data_width = CQSPI_INST_TYPE_SINGLE;
+
+ if (read) {
+ switch (nor->read_proto) {
+ case SNOR_PROTO_1_1_1:
+ f_pdata->data_width = CQSPI_INST_TYPE_SINGLE;
+ break;
+ case SNOR_PROTO_1_1_2:
+ f_pdata->data_width = CQSPI_INST_TYPE_DUAL;
+ break;
+ case SNOR_PROTO_1_1_4:
+ f_pdata->data_width = CQSPI_INST_TYPE_QUAD;
+ break;
+ case SNOR_PROTO_1_1_8:
+ f_pdata->data_width = CQSPI_INST_TYPE_OCTAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+ }
+
+ cqspi_configure(nor);
+
+ return 0;
+}
+
+static ssize_t cqspi_write(struct spi_nor *nor, loff_t to,
+ size_t len, const u_char *buf)
+{
+ struct cqspi_flash_pdata *f_pdata = nor->priv;
+ struct cqspi_st *cqspi = f_pdata->cqspi;
+ int ret;
+
+ ret = cqspi_set_protocol(nor, 0);
+ if (ret)
+ return ret;
+
+ ret = cqspi_write_setup(nor);
+ if (ret)
+ return ret;
+
+ if (f_pdata->use_direct_mode) {
+ memcpy_toio(cqspi->ahb_base + to, buf, len);
+ ret = cqspi_wait_idle(cqspi);
+ } else {
+ ret = cqspi_indirect_write_execute(nor, to, buf, len);
+ }
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+static void cqspi_rx_dma_callback(void *param)
+{
+ struct cqspi_st *cqspi = param;
+
+ complete(&cqspi->rx_dma_complete);
+}
+
+static int cqspi_direct_read_execute(struct spi_nor *nor, u_char *buf,
+ loff_t from, size_t len)
+{
+ struct cqspi_flash_pdata *f_pdata = nor->priv;
+ struct cqspi_st *cqspi = f_pdata->cqspi;
+ enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
+ dma_addr_t dma_src = (dma_addr_t)cqspi->mmap_phys_base + from;
+ int ret = 0;
+ struct dma_async_tx_descriptor *tx;
+ dma_cookie_t cookie;
+ dma_addr_t dma_dst;
+
+ if (!cqspi->rx_chan || !virt_addr_valid(buf)) {
+ memcpy_fromio(buf, cqspi->ahb_base + from, len);
+ return 0;
+ }
+
+ dma_dst = dma_map_single(nor->dev, buf, len, DMA_FROM_DEVICE);
+ if (dma_mapping_error(nor->dev, dma_dst)) {
+ dev_err(nor->dev, "dma mapping failed\n");
+ return -ENOMEM;
+ }
+ tx = dmaengine_prep_dma_memcpy(cqspi->rx_chan, dma_dst, dma_src,
+ len, flags);
+ if (!tx) {
+ dev_err(nor->dev, "device_prep_dma_memcpy error\n");
+ ret = -EIO;
+ goto err_unmap;
+ }
+
+ tx->callback = cqspi_rx_dma_callback;
+ tx->callback_param = cqspi;
+ cookie = tx->tx_submit(tx);
+ reinit_completion(&cqspi->rx_dma_complete);
+
+ ret = dma_submit_error(cookie);
+ if (ret) {
+ dev_err(nor->dev, "dma_submit_error %d\n", cookie);
+ ret = -EIO;
+ goto err_unmap;
+ }
+
+ dma_async_issue_pending(cqspi->rx_chan);
+ if (!wait_for_completion_timeout(&cqspi->rx_dma_complete,
+ msecs_to_jiffies(len))) {
+ dmaengine_terminate_sync(cqspi->rx_chan);
+ dev_err(nor->dev, "DMA wait_for_completion_timeout\n");
+ ret = -ETIMEDOUT;
+ goto err_unmap;
+ }
+
+err_unmap:
+ dma_unmap_single(nor->dev, dma_dst, len, DMA_FROM_DEVICE);
+
+ return ret;
+}
+
+static ssize_t cqspi_read(struct spi_nor *nor, loff_t from,
+ size_t len, u_char *buf)
+{
+ struct cqspi_flash_pdata *f_pdata = nor->priv;
+ int ret;
+
+ ret = cqspi_set_protocol(nor, 1);
+ if (ret)
+ return ret;
+
+ ret = cqspi_read_setup(nor);
+ if (ret)
+ return ret;
+
+ if (f_pdata->use_direct_mode)
+ ret = cqspi_direct_read_execute(nor, buf, from, len);
+ else
+ ret = cqspi_indirect_read_execute(nor, buf, from, len);
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+static int cqspi_erase(struct spi_nor *nor, loff_t offs)
+{
+ int ret;
+
+ ret = cqspi_set_protocol(nor, 0);
+ if (ret)
+ return ret;
+
+ /* Send write enable, then erase commands. */
+ ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WREN, NULL, 0);
+ if (ret)
+ return ret;
+
+ /* Set up command buffer. */
+ ret = cqspi_command_write_addr(nor, nor->erase_opcode, offs);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int cqspi_prep(struct spi_nor *nor)
+{
+ struct cqspi_flash_pdata *f_pdata = nor->priv;
+ struct cqspi_st *cqspi = f_pdata->cqspi;
+
+ mutex_lock(&cqspi->bus_mutex);
+
+ return 0;
+}
+
+static void cqspi_unprep(struct spi_nor *nor)
+{
+ struct cqspi_flash_pdata *f_pdata = nor->priv;
+ struct cqspi_st *cqspi = f_pdata->cqspi;
+
+ mutex_unlock(&cqspi->bus_mutex);
+}
+
+static int cqspi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, size_t len)
+{
+ int ret;
+
+ ret = cqspi_set_protocol(nor, 0);
+ if (!ret)
+ ret = cqspi_command_read(nor, opcode, buf, len);
+
+ return ret;
+}
+
+static int cqspi_write_reg(struct spi_nor *nor, u8 opcode, const u8 *buf,
+ size_t len)
+{
+ int ret;
+
+ ret = cqspi_set_protocol(nor, 0);
+ if (!ret)
+ ret = cqspi_command_write(nor, opcode, buf, len);
+
+ return ret;
+}
+
+static int cqspi_of_get_flash_pdata(struct platform_device *pdev,
+ struct cqspi_flash_pdata *f_pdata,
+ struct device_node *np)
+{
+ if (of_property_read_u32(np, "cdns,read-delay", &f_pdata->read_delay)) {
+ dev_err(&pdev->dev, "couldn't determine read-delay\n");
+ return -ENXIO;
+ }
+
+ if (of_property_read_u32(np, "cdns,tshsl-ns", &f_pdata->tshsl_ns)) {
+ dev_err(&pdev->dev, "couldn't determine tshsl-ns\n");
+ return -ENXIO;
+ }
+
+ if (of_property_read_u32(np, "cdns,tsd2d-ns", &f_pdata->tsd2d_ns)) {
+ dev_err(&pdev->dev, "couldn't determine tsd2d-ns\n");
+ return -ENXIO;
+ }
+
+ if (of_property_read_u32(np, "cdns,tchsh-ns", &f_pdata->tchsh_ns)) {
+ dev_err(&pdev->dev, "couldn't determine tchsh-ns\n");
+ return -ENXIO;
+ }
+
+ if (of_property_read_u32(np, "cdns,tslch-ns", &f_pdata->tslch_ns)) {
+ dev_err(&pdev->dev, "couldn't determine tslch-ns\n");
+ return -ENXIO;
+ }
+
+ if (of_property_read_u32(np, "spi-max-frequency", &f_pdata->clk_rate)) {
+ dev_err(&pdev->dev, "couldn't determine spi-max-frequency\n");
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+static int cqspi_of_get_pdata(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct cqspi_st *cqspi = platform_get_drvdata(pdev);
+
+ cqspi->is_decoded_cs = of_property_read_bool(np, "cdns,is-decoded-cs");
+
+ if (of_property_read_u32(np, "cdns,fifo-depth", &cqspi->fifo_depth)) {
+ dev_err(&pdev->dev, "couldn't determine fifo-depth\n");
+ return -ENXIO;
+ }
+
+ if (of_property_read_u32(np, "cdns,fifo-width", &cqspi->fifo_width)) {
+ dev_err(&pdev->dev, "couldn't determine fifo-width\n");
+ return -ENXIO;
+ }
+
+ if (of_property_read_u32(np, "cdns,trigger-address",
+ &cqspi->trigger_address)) {
+ dev_err(&pdev->dev, "couldn't determine trigger-address\n");
+ return -ENXIO;
+ }
+
+ cqspi->rclk_en = of_property_read_bool(np, "cdns,rclk-en");
+
+ return 0;
+}
+
+static void cqspi_controller_init(struct cqspi_st *cqspi)
+{
+ u32 reg;
+
+ cqspi_controller_enable(cqspi, 0);
+
+ /* Configure the remap address register, no remap */
+ writel(0, cqspi->iobase + CQSPI_REG_REMAP);
+
+ /* Disable all interrupts. */
+ writel(0, cqspi->iobase + CQSPI_REG_IRQMASK);
+
+ /* Configure the SRAM split to 1:1 . */
+ writel(cqspi->fifo_depth / 2, cqspi->iobase + CQSPI_REG_SRAMPARTITION);
+
+ /* Load indirect trigger address. */
+ writel(cqspi->trigger_address,
+ cqspi->iobase + CQSPI_REG_INDIRECTTRIGGER);
+
+ /* Program read watermark -- 1/2 of the FIFO. */
+ writel(cqspi->fifo_depth * cqspi->fifo_width / 2,
+ cqspi->iobase + CQSPI_REG_INDIRECTRDWATERMARK);
+ /* Program write watermark -- 1/8 of the FIFO. */
+ writel(cqspi->fifo_depth * cqspi->fifo_width / 8,
+ cqspi->iobase + CQSPI_REG_INDIRECTWRWATERMARK);
+
+ /* Enable Direct Access Controller */
+ reg = readl(cqspi->iobase + CQSPI_REG_CONFIG);
+ reg |= CQSPI_REG_CONFIG_ENB_DIR_ACC_CTRL;
+ writel(reg, cqspi->iobase + CQSPI_REG_CONFIG);
+
+ cqspi_controller_enable(cqspi, 1);
+}
+
+static void cqspi_request_mmap_dma(struct cqspi_st *cqspi)
+{
+ dma_cap_mask_t mask;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_MEMCPY, mask);
+
+ cqspi->rx_chan = dma_request_chan_by_mask(&mask);
+ if (IS_ERR(cqspi->rx_chan)) {
+ dev_err(&cqspi->pdev->dev, "No Rx DMA available\n");
+ cqspi->rx_chan = NULL;
+ }
+ init_completion(&cqspi->rx_dma_complete);
+}
+
+static const struct spi_nor_controller_ops cqspi_controller_ops = {
+ .prepare = cqspi_prep,
+ .unprepare = cqspi_unprep,
+ .read_reg = cqspi_read_reg,
+ .write_reg = cqspi_write_reg,
+ .read = cqspi_read,
+ .write = cqspi_write,
+ .erase = cqspi_erase,
+};
+
+static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np)
+{
+ struct platform_device *pdev = cqspi->pdev;
+ struct device *dev = &pdev->dev;
+ const struct cqspi_driver_platdata *ddata;
+ struct spi_nor_hwcaps hwcaps;
+ struct cqspi_flash_pdata *f_pdata;
+ struct spi_nor *nor;
+ struct mtd_info *mtd;
+ unsigned int cs;
+ int i, ret;
+
+ ddata = of_device_get_match_data(dev);
+ if (!ddata) {
+ dev_err(dev, "Couldn't find driver data\n");
+ return -EINVAL;
+ }
+ hwcaps.mask = ddata->hwcaps_mask;
+
+ /* Get flash device data */
+ for_each_available_child_of_node(dev->of_node, np) {
+ ret = of_property_read_u32(np, "reg", &cs);
+ if (ret) {
+ dev_err(dev, "Couldn't determine chip select.\n");
+ goto err;
+ }
+
+ if (cs >= CQSPI_MAX_CHIPSELECT) {
+ ret = -EINVAL;
+ dev_err(dev, "Chip select %d out of range.\n", cs);
+ goto err;
+ }
+
+ f_pdata = &cqspi->f_pdata[cs];
+ f_pdata->cqspi = cqspi;
+ f_pdata->cs = cs;
+
+ ret = cqspi_of_get_flash_pdata(pdev, f_pdata, np);
+ if (ret)
+ goto err;
+
+ nor = &f_pdata->nor;
+ mtd = &nor->mtd;
+
+ mtd->priv = nor;
+
+ nor->dev = dev;
+ spi_nor_set_flash_node(nor, np);
+ nor->priv = f_pdata;
+ nor->controller_ops = &cqspi_controller_ops;
+
+ mtd->name = devm_kasprintf(dev, GFP_KERNEL, "%s.%d",
+ dev_name(dev), cs);
+ if (!mtd->name) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ ret = spi_nor_scan(nor, NULL, &hwcaps);
+ if (ret)
+ goto err;
+
+ ret = mtd_device_register(mtd, NULL, 0);
+ if (ret)
+ goto err;
+
+ f_pdata->registered = true;
+
+ if (mtd->size <= cqspi->ahb_size) {
+ f_pdata->use_direct_mode = true;
+ dev_dbg(nor->dev, "using direct mode for %s\n",
+ mtd->name);
+
+ if (!cqspi->rx_chan)
+ cqspi_request_mmap_dma(cqspi);
+ }
+ }
+
+ return 0;
+
+err:
+ for (i = 0; i < CQSPI_MAX_CHIPSELECT; i++)
+ if (cqspi->f_pdata[i].registered)
+ mtd_device_unregister(&cqspi->f_pdata[i].nor.mtd);
+ return ret;
+}
+
+static int cqspi_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ struct cqspi_st *cqspi;
+ struct resource *res;
+ struct resource *res_ahb;
+ struct reset_control *rstc, *rstc_ocp;
+ const struct cqspi_driver_platdata *ddata;
+ int ret;
+ int irq;
+
+ cqspi = devm_kzalloc(dev, sizeof(*cqspi), GFP_KERNEL);
+ if (!cqspi)
+ return -ENOMEM;
+
+ mutex_init(&cqspi->bus_mutex);
+ cqspi->pdev = pdev;
+ platform_set_drvdata(pdev, cqspi);
+
+ /* Obtain configuration from OF. */
+ ret = cqspi_of_get_pdata(pdev);
+ if (ret) {
+ dev_err(dev, "Cannot get mandatory OF data.\n");
+ return -ENODEV;
+ }
+
+ /* Obtain QSPI clock. */
+ cqspi->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(cqspi->clk)) {
+ dev_err(dev, "Cannot claim QSPI clock.\n");
+ return PTR_ERR(cqspi->clk);
+ }
+
+ /* Obtain and remap controller address. */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ cqspi->iobase = devm_ioremap_resource(dev, res);
+ if (IS_ERR(cqspi->iobase)) {
+ dev_err(dev, "Cannot remap controller address.\n");
+ return PTR_ERR(cqspi->iobase);
+ }
+
+ /* Obtain and remap AHB address. */
+ res_ahb = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ cqspi->ahb_base = devm_ioremap_resource(dev, res_ahb);
+ if (IS_ERR(cqspi->ahb_base)) {
+ dev_err(dev, "Cannot remap AHB address.\n");
+ return PTR_ERR(cqspi->ahb_base);
+ }
+ cqspi->mmap_phys_base = (dma_addr_t)res_ahb->start;
+ cqspi->ahb_size = resource_size(res_ahb);
+
+ init_completion(&cqspi->transfer_complete);
+
+ /* Obtain IRQ line. */
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return -ENXIO;
+
+ pm_runtime_enable(dev);
+ ret = pm_runtime_get_sync(dev);
+ if (ret < 0) {
+ pm_runtime_put_noidle(dev);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(cqspi->clk);
+ if (ret) {
+ dev_err(dev, "Cannot enable QSPI clock.\n");
+ goto probe_clk_failed;
+ }
+
+ /* Obtain QSPI reset control */
+ rstc = devm_reset_control_get_optional_exclusive(dev, "qspi");
+ if (IS_ERR(rstc)) {
+ dev_err(dev, "Cannot get QSPI reset.\n");
+ return PTR_ERR(rstc);
+ }
+
+ rstc_ocp = devm_reset_control_get_optional_exclusive(dev, "qspi-ocp");
+ if (IS_ERR(rstc_ocp)) {
+ dev_err(dev, "Cannot get QSPI OCP reset.\n");
+ return PTR_ERR(rstc_ocp);
+ }
+
+ reset_control_assert(rstc);
+ reset_control_deassert(rstc);
+
+ reset_control_assert(rstc_ocp);
+ reset_control_deassert(rstc_ocp);
+
+ cqspi->master_ref_clk_hz = clk_get_rate(cqspi->clk);
+ ddata = of_device_get_match_data(dev);
+ if (ddata && (ddata->quirks & CQSPI_NEEDS_WR_DELAY))
+ cqspi->wr_delay = 5 * DIV_ROUND_UP(NSEC_PER_SEC,
+ cqspi->master_ref_clk_hz);
+
+ ret = devm_request_irq(dev, irq, cqspi_irq_handler, 0,
+ pdev->name, cqspi);
+ if (ret) {
+ dev_err(dev, "Cannot request IRQ.\n");
+ goto probe_irq_failed;
+ }
+
+ cqspi_wait_idle(cqspi);
+ cqspi_controller_init(cqspi);
+ cqspi->current_cs = -1;
+ cqspi->sclk = 0;
+
+ ret = cqspi_setup_flash(cqspi, np);
+ if (ret) {
+ dev_err(dev, "Cadence QSPI NOR probe failed %d\n", ret);
+ goto probe_setup_failed;
+ }
+
+ return ret;
+probe_setup_failed:
+ cqspi_controller_enable(cqspi, 0);
+probe_irq_failed:
+ clk_disable_unprepare(cqspi->clk);
+probe_clk_failed:
+ pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
+ return ret;
+}
+
+static int cqspi_remove(struct platform_device *pdev)
+{
+ struct cqspi_st *cqspi = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < CQSPI_MAX_CHIPSELECT; i++)
+ if (cqspi->f_pdata[i].registered)
+ mtd_device_unregister(&cqspi->f_pdata[i].nor.mtd);
+
+ cqspi_controller_enable(cqspi, 0);
+
+ if (cqspi->rx_chan)
+ dma_release_channel(cqspi->rx_chan);
+
+ clk_disable_unprepare(cqspi->clk);
+
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int cqspi_suspend(struct device *dev)
+{
+ struct cqspi_st *cqspi = dev_get_drvdata(dev);
+
+ cqspi_controller_enable(cqspi, 0);
+ return 0;
+}
+
+static int cqspi_resume(struct device *dev)
+{
+ struct cqspi_st *cqspi = dev_get_drvdata(dev);
+
+ cqspi_controller_enable(cqspi, 1);
+ return 0;
+}
+
+static const struct dev_pm_ops cqspi__dev_pm_ops = {
+ .suspend = cqspi_suspend,
+ .resume = cqspi_resume,
+};
+
+#define CQSPI_DEV_PM_OPS (&cqspi__dev_pm_ops)
+#else
+#define CQSPI_DEV_PM_OPS NULL
+#endif
+
+static const struct cqspi_driver_platdata cdns_qspi = {
+ .hwcaps_mask = CQSPI_BASE_HWCAPS_MASK,
+};
+
+static const struct cqspi_driver_platdata k2g_qspi = {
+ .hwcaps_mask = CQSPI_BASE_HWCAPS_MASK,
+ .quirks = CQSPI_NEEDS_WR_DELAY,
+};
+
+static const struct cqspi_driver_platdata am654_ospi = {
+ .hwcaps_mask = CQSPI_BASE_HWCAPS_MASK | SNOR_HWCAPS_READ_1_1_8,
+ .quirks = CQSPI_NEEDS_WR_DELAY,
+};
+
+static const struct of_device_id cqspi_dt_ids[] = {
+ {
+ .compatible = "cdns,qspi-nor",
+ .data = &cdns_qspi,
+ },
+ {
+ .compatible = "ti,k2g-qspi",
+ .data = &k2g_qspi,
+ },
+ {
+ .compatible = "ti,am654-ospi",
+ .data = &am654_ospi,
+ },
+ { /* end of table */ }
+};
+
+MODULE_DEVICE_TABLE(of, cqspi_dt_ids);
+
+static struct platform_driver cqspi_platform_driver = {
+ .probe = cqspi_probe,
+ .remove = cqspi_remove,
+ .driver = {
+ .name = CQSPI_NAME,
+ .pm = CQSPI_DEV_PM_OPS,
+ .of_match_table = cqspi_dt_ids,
+ },
+};
+
+module_platform_driver(cqspi_platform_driver);
+
+MODULE_DESCRIPTION("Cadence QSPI Controller Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" CQSPI_NAME);
+MODULE_AUTHOR("Ley Foon Tan <lftan@altera.com>");
+MODULE_AUTHOR("Graham Moore <grmoore@opensource.altera.com>");
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * HiSilicon FMC SPI-NOR flash controller driver
+ *
+ * Copyright (c) 2015-2016 HiSilicon Technologies Co., Ltd.
+ */
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/spi-nor.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* Hardware register offsets and field definitions */
+#define FMC_CFG 0x00
+#define FMC_CFG_OP_MODE_MASK BIT_MASK(0)
+#define FMC_CFG_OP_MODE_BOOT 0
+#define FMC_CFG_OP_MODE_NORMAL 1
+#define FMC_CFG_FLASH_SEL(type) (((type) & 0x3) << 1)
+#define FMC_CFG_FLASH_SEL_MASK 0x6
+#define FMC_ECC_TYPE(type) (((type) & 0x7) << 5)
+#define FMC_ECC_TYPE_MASK GENMASK(7, 5)
+#define SPI_NOR_ADDR_MODE_MASK BIT_MASK(10)
+#define SPI_NOR_ADDR_MODE_3BYTES (0x0 << 10)
+#define SPI_NOR_ADDR_MODE_4BYTES (0x1 << 10)
+#define FMC_GLOBAL_CFG 0x04
+#define FMC_GLOBAL_CFG_WP_ENABLE BIT(6)
+#define FMC_SPI_TIMING_CFG 0x08
+#define TIMING_CFG_TCSH(nr) (((nr) & 0xf) << 8)
+#define TIMING_CFG_TCSS(nr) (((nr) & 0xf) << 4)
+#define TIMING_CFG_TSHSL(nr) ((nr) & 0xf)
+#define CS_HOLD_TIME 0x6
+#define CS_SETUP_TIME 0x6
+#define CS_DESELECT_TIME 0xf
+#define FMC_INT 0x18
+#define FMC_INT_OP_DONE BIT(0)
+#define FMC_INT_CLR 0x20
+#define FMC_CMD 0x24
+#define FMC_CMD_CMD1(cmd) ((cmd) & 0xff)
+#define FMC_ADDRL 0x2c
+#define FMC_OP_CFG 0x30
+#define OP_CFG_FM_CS(cs) ((cs) << 11)
+#define OP_CFG_MEM_IF_TYPE(type) (((type) & 0x7) << 7)
+#define OP_CFG_ADDR_NUM(addr) (((addr) & 0x7) << 4)
+#define OP_CFG_DUMMY_NUM(dummy) ((dummy) & 0xf)
+#define FMC_DATA_NUM 0x38
+#define FMC_DATA_NUM_CNT(cnt) ((cnt) & GENMASK(13, 0))
+#define FMC_OP 0x3c
+#define FMC_OP_DUMMY_EN BIT(8)
+#define FMC_OP_CMD1_EN BIT(7)
+#define FMC_OP_ADDR_EN BIT(6)
+#define FMC_OP_WRITE_DATA_EN BIT(5)
+#define FMC_OP_READ_DATA_EN BIT(2)
+#define FMC_OP_READ_STATUS_EN BIT(1)
+#define FMC_OP_REG_OP_START BIT(0)
+#define FMC_DMA_LEN 0x40
+#define FMC_DMA_LEN_SET(len) ((len) & GENMASK(27, 0))
+#define FMC_DMA_SADDR_D0 0x4c
+#define HIFMC_DMA_MAX_LEN (4096)
+#define HIFMC_DMA_MASK (HIFMC_DMA_MAX_LEN - 1)
+#define FMC_OP_DMA 0x68
+#define OP_CTRL_RD_OPCODE(code) (((code) & 0xff) << 16)
+#define OP_CTRL_WR_OPCODE(code) (((code) & 0xff) << 8)
+#define OP_CTRL_RW_OP(op) ((op) << 1)
+#define OP_CTRL_DMA_OP_READY BIT(0)
+#define FMC_OP_READ 0x0
+#define FMC_OP_WRITE 0x1
+#define FMC_WAIT_TIMEOUT 1000000
+
+enum hifmc_iftype {
+ IF_TYPE_STD,
+ IF_TYPE_DUAL,
+ IF_TYPE_DIO,
+ IF_TYPE_QUAD,
+ IF_TYPE_QIO,
+};
+
+struct hifmc_priv {
+ u32 chipselect;
+ u32 clkrate;
+ struct hifmc_host *host;
+};
+
+#define HIFMC_MAX_CHIP_NUM 2
+struct hifmc_host {
+ struct device *dev;
+ struct mutex lock;
+
+ void __iomem *regbase;
+ void __iomem *iobase;
+ struct clk *clk;
+ void *buffer;
+ dma_addr_t dma_buffer;
+
+ struct spi_nor *nor[HIFMC_MAX_CHIP_NUM];
+ u32 num_chip;
+};
+
+static inline int hisi_spi_nor_wait_op_finish(struct hifmc_host *host)
+{
+ u32 reg;
+
+ return readl_poll_timeout(host->regbase + FMC_INT, reg,
+ (reg & FMC_INT_OP_DONE), 0, FMC_WAIT_TIMEOUT);
+}
+
+static int hisi_spi_nor_get_if_type(enum spi_nor_protocol proto)
+{
+ enum hifmc_iftype if_type;
+
+ switch (proto) {
+ case SNOR_PROTO_1_1_2:
+ if_type = IF_TYPE_DUAL;
+ break;
+ case SNOR_PROTO_1_2_2:
+ if_type = IF_TYPE_DIO;
+ break;
+ case SNOR_PROTO_1_1_4:
+ if_type = IF_TYPE_QUAD;
+ break;
+ case SNOR_PROTO_1_4_4:
+ if_type = IF_TYPE_QIO;
+ break;
+ case SNOR_PROTO_1_1_1:
+ default:
+ if_type = IF_TYPE_STD;
+ break;
+ }
+
+ return if_type;
+}
+
+static void hisi_spi_nor_init(struct hifmc_host *host)
+{
+ u32 reg;
+
+ reg = TIMING_CFG_TCSH(CS_HOLD_TIME)
+ | TIMING_CFG_TCSS(CS_SETUP_TIME)
+ | TIMING_CFG_TSHSL(CS_DESELECT_TIME);
+ writel(reg, host->regbase + FMC_SPI_TIMING_CFG);
+}
+
+static int hisi_spi_nor_prep(struct spi_nor *nor)
+{
+ struct hifmc_priv *priv = nor->priv;
+ struct hifmc_host *host = priv->host;
+ int ret;
+
+ mutex_lock(&host->lock);
+
+ ret = clk_set_rate(host->clk, priv->clkrate);
+ if (ret)
+ goto out;
+
+ ret = clk_prepare_enable(host->clk);
+ if (ret)
+ goto out;
+
+ return 0;
+
+out:
+ mutex_unlock(&host->lock);
+ return ret;
+}
+
+static void hisi_spi_nor_unprep(struct spi_nor *nor)
+{
+ struct hifmc_priv *priv = nor->priv;
+ struct hifmc_host *host = priv->host;
+
+ clk_disable_unprepare(host->clk);
+ mutex_unlock(&host->lock);
+}
+
+static int hisi_spi_nor_op_reg(struct spi_nor *nor,
+ u8 opcode, size_t len, u8 optype)
+{
+ struct hifmc_priv *priv = nor->priv;
+ struct hifmc_host *host = priv->host;
+ u32 reg;
+
+ reg = FMC_CMD_CMD1(opcode);
+ writel(reg, host->regbase + FMC_CMD);
+
+ reg = FMC_DATA_NUM_CNT(len);
+ writel(reg, host->regbase + FMC_DATA_NUM);
+
+ reg = OP_CFG_FM_CS(priv->chipselect);
+ writel(reg, host->regbase + FMC_OP_CFG);
+
+ writel(0xff, host->regbase + FMC_INT_CLR);
+ reg = FMC_OP_CMD1_EN | FMC_OP_REG_OP_START | optype;
+ writel(reg, host->regbase + FMC_OP);
+
+ return hisi_spi_nor_wait_op_finish(host);
+}
+
+static int hisi_spi_nor_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
+ size_t len)
+{
+ struct hifmc_priv *priv = nor->priv;
+ struct hifmc_host *host = priv->host;
+ int ret;
+
+ ret = hisi_spi_nor_op_reg(nor, opcode, len, FMC_OP_READ_DATA_EN);
+ if (ret)
+ return ret;
+
+ memcpy_fromio(buf, host->iobase, len);
+ return 0;
+}
+
+static int hisi_spi_nor_write_reg(struct spi_nor *nor, u8 opcode,
+ const u8 *buf, size_t len)
+{
+ struct hifmc_priv *priv = nor->priv;
+ struct hifmc_host *host = priv->host;
+
+ if (len)
+ memcpy_toio(host->iobase, buf, len);
+
+ return hisi_spi_nor_op_reg(nor, opcode, len, FMC_OP_WRITE_DATA_EN);
+}
+
+static int hisi_spi_nor_dma_transfer(struct spi_nor *nor, loff_t start_off,
+ dma_addr_t dma_buf, size_t len, u8 op_type)
+{
+ struct hifmc_priv *priv = nor->priv;
+ struct hifmc_host *host = priv->host;
+ u8 if_type = 0;
+ u32 reg;
+
+ reg = readl(host->regbase + FMC_CFG);
+ reg &= ~(FMC_CFG_OP_MODE_MASK | SPI_NOR_ADDR_MODE_MASK);
+ reg |= FMC_CFG_OP_MODE_NORMAL;
+ reg |= (nor->addr_width == 4) ? SPI_NOR_ADDR_MODE_4BYTES
+ : SPI_NOR_ADDR_MODE_3BYTES;
+ writel(reg, host->regbase + FMC_CFG);
+
+ writel(start_off, host->regbase + FMC_ADDRL);
+ writel(dma_buf, host->regbase + FMC_DMA_SADDR_D0);
+ writel(FMC_DMA_LEN_SET(len), host->regbase + FMC_DMA_LEN);
+
+ reg = OP_CFG_FM_CS(priv->chipselect);
+ if (op_type == FMC_OP_READ)
+ if_type = hisi_spi_nor_get_if_type(nor->read_proto);
+ else
+ if_type = hisi_spi_nor_get_if_type(nor->write_proto);
+ reg |= OP_CFG_MEM_IF_TYPE(if_type);
+ if (op_type == FMC_OP_READ)
+ reg |= OP_CFG_DUMMY_NUM(nor->read_dummy >> 3);
+ writel(reg, host->regbase + FMC_OP_CFG);
+
+ writel(0xff, host->regbase + FMC_INT_CLR);
+ reg = OP_CTRL_RW_OP(op_type) | OP_CTRL_DMA_OP_READY;
+ reg |= (op_type == FMC_OP_READ)
+ ? OP_CTRL_RD_OPCODE(nor->read_opcode)
+ : OP_CTRL_WR_OPCODE(nor->program_opcode);
+ writel(reg, host->regbase + FMC_OP_DMA);
+
+ return hisi_spi_nor_wait_op_finish(host);
+}
+
+static ssize_t hisi_spi_nor_read(struct spi_nor *nor, loff_t from, size_t len,
+ u_char *read_buf)
+{
+ struct hifmc_priv *priv = nor->priv;
+ struct hifmc_host *host = priv->host;
+ size_t offset;
+ int ret;
+
+ for (offset = 0; offset < len; offset += HIFMC_DMA_MAX_LEN) {
+ size_t trans = min_t(size_t, HIFMC_DMA_MAX_LEN, len - offset);
+
+ ret = hisi_spi_nor_dma_transfer(nor,
+ from + offset, host->dma_buffer, trans, FMC_OP_READ);
+ if (ret) {
+ dev_warn(nor->dev, "DMA read timeout\n");
+ return ret;
+ }
+ memcpy(read_buf + offset, host->buffer, trans);
+ }
+
+ return len;
+}
+
+static ssize_t hisi_spi_nor_write(struct spi_nor *nor, loff_t to,
+ size_t len, const u_char *write_buf)
+{
+ struct hifmc_priv *priv = nor->priv;
+ struct hifmc_host *host = priv->host;
+ size_t offset;
+ int ret;
+
+ for (offset = 0; offset < len; offset += HIFMC_DMA_MAX_LEN) {
+ size_t trans = min_t(size_t, HIFMC_DMA_MAX_LEN, len - offset);
+
+ memcpy(host->buffer, write_buf + offset, trans);
+ ret = hisi_spi_nor_dma_transfer(nor,
+ to + offset, host->dma_buffer, trans, FMC_OP_WRITE);
+ if (ret) {
+ dev_warn(nor->dev, "DMA write timeout\n");
+ return ret;
+ }
+ }
+
+ return len;
+}
+
+static const struct spi_nor_controller_ops hisi_controller_ops = {
+ .prepare = hisi_spi_nor_prep,
+ .unprepare = hisi_spi_nor_unprep,
+ .read_reg = hisi_spi_nor_read_reg,
+ .write_reg = hisi_spi_nor_write_reg,
+ .read = hisi_spi_nor_read,
+ .write = hisi_spi_nor_write,
+};
+
+/**
+ * Get spi flash device information and register it as a mtd device.
+ */
+static int hisi_spi_nor_register(struct device_node *np,
+ struct hifmc_host *host)
+{
+ const struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ |
+ SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_READ_1_1_2 |
+ SNOR_HWCAPS_READ_1_1_4 |
+ SNOR_HWCAPS_PP,
+ };
+ struct device *dev = host->dev;
+ struct spi_nor *nor;
+ struct hifmc_priv *priv;
+ struct mtd_info *mtd;
+ int ret;
+
+ nor = devm_kzalloc(dev, sizeof(*nor), GFP_KERNEL);
+ if (!nor)
+ return -ENOMEM;
+
+ nor->dev = dev;
+ spi_nor_set_flash_node(nor, np);
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ ret = of_property_read_u32(np, "reg", &priv->chipselect);
+ if (ret) {
+ dev_err(dev, "There's no reg property for %pOF\n",
+ np);
+ return ret;
+ }
+
+ ret = of_property_read_u32(np, "spi-max-frequency",
+ &priv->clkrate);
+ if (ret) {
+ dev_err(dev, "There's no spi-max-frequency property for %pOF\n",
+ np);
+ return ret;
+ }
+ priv->host = host;
+ nor->priv = priv;
+ nor->controller_ops = &hisi_controller_ops;
+
+ ret = spi_nor_scan(nor, NULL, &hwcaps);
+ if (ret)
+ return ret;
+
+ mtd = &nor->mtd;
+ mtd->name = np->name;
+ ret = mtd_device_register(mtd, NULL, 0);
+ if (ret)
+ return ret;
+
+ host->nor[host->num_chip] = nor;
+ host->num_chip++;
+ return 0;
+}
+
+static void hisi_spi_nor_unregister_all(struct hifmc_host *host)
+{
+ int i;
+
+ for (i = 0; i < host->num_chip; i++)
+ mtd_device_unregister(&host->nor[i]->mtd);
+}
+
+static int hisi_spi_nor_register_all(struct hifmc_host *host)
+{
+ struct device *dev = host->dev;
+ struct device_node *np;
+ int ret;
+
+ for_each_available_child_of_node(dev->of_node, np) {
+ ret = hisi_spi_nor_register(np, host);
+ if (ret)
+ goto fail;
+
+ if (host->num_chip == HIFMC_MAX_CHIP_NUM) {
+ dev_warn(dev, "Flash device number exceeds the maximum chipselect number\n");
+ of_node_put(np);
+ break;
+ }
+ }
+
+ return 0;
+
+fail:
+ hisi_spi_nor_unregister_all(host);
+ return ret;
+}
+
+static int hisi_spi_nor_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ struct hifmc_host *host;
+ int ret;
+
+ host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
+ if (!host)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, host);
+ host->dev = dev;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "control");
+ host->regbase = devm_ioremap_resource(dev, res);
+ if (IS_ERR(host->regbase))
+ return PTR_ERR(host->regbase);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "memory");
+ host->iobase = devm_ioremap_resource(dev, res);
+ if (IS_ERR(host->iobase))
+ return PTR_ERR(host->iobase);
+
+ host->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(host->clk))
+ return PTR_ERR(host->clk);
+
+ ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_warn(dev, "Unable to set dma mask\n");
+ return ret;
+ }
+
+ host->buffer = dmam_alloc_coherent(dev, HIFMC_DMA_MAX_LEN,
+ &host->dma_buffer, GFP_KERNEL);
+ if (!host->buffer)
+ return -ENOMEM;
+
+ ret = clk_prepare_enable(host->clk);
+ if (ret)
+ return ret;
+
+ mutex_init(&host->lock);
+ hisi_spi_nor_init(host);
+ ret = hisi_spi_nor_register_all(host);
+ if (ret)
+ mutex_destroy(&host->lock);
+
+ clk_disable_unprepare(host->clk);
+ return ret;
+}
+
+static int hisi_spi_nor_remove(struct platform_device *pdev)
+{
+ struct hifmc_host *host = platform_get_drvdata(pdev);
+
+ hisi_spi_nor_unregister_all(host);
+ mutex_destroy(&host->lock);
+ clk_disable_unprepare(host->clk);
+ return 0;
+}
+
+static const struct of_device_id hisi_spi_nor_dt_ids[] = {
+ { .compatible = "hisilicon,fmc-spi-nor"},
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, hisi_spi_nor_dt_ids);
+
+static struct platform_driver hisi_spi_nor_driver = {
+ .driver = {
+ .name = "hisi-sfc",
+ .of_match_table = hisi_spi_nor_dt_ids,
+ },
+ .probe = hisi_spi_nor_probe,
+ .remove = hisi_spi_nor_remove,
+};
+module_platform_driver(hisi_spi_nor_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("HiSilicon SPI Nor Flash Controller Driver");
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel PCH/PCU SPI flash PCI driver.
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ */
+
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include "intel-spi.h"
+
+#define BCR 0xdc
+#define BCR_WPD BIT(0)
+
+static const struct intel_spi_boardinfo bxt_info = {
+ .type = INTEL_SPI_BXT,
+};
+
+static const struct intel_spi_boardinfo cnl_info = {
+ .type = INTEL_SPI_CNL,
+};
+
+static int intel_spi_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct intel_spi_boardinfo *info;
+ struct intel_spi *ispi;
+ u32 bcr;
+ int ret;
+
+ ret = pcim_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ info = devm_kmemdup(&pdev->dev, (void *)id->driver_data, sizeof(*info),
+ GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ /* Try to make the chip read/write */
+ pci_read_config_dword(pdev, BCR, &bcr);
+ if (!(bcr & BCR_WPD)) {
+ bcr |= BCR_WPD;
+ pci_write_config_dword(pdev, BCR, bcr);
+ pci_read_config_dword(pdev, BCR, &bcr);
+ }
+ info->writeable = !!(bcr & BCR_WPD);
+
+ ispi = intel_spi_probe(&pdev->dev, &pdev->resource[0], info);
+ if (IS_ERR(ispi))
+ return PTR_ERR(ispi);
+
+ pci_set_drvdata(pdev, ispi);
+ return 0;
+}
+
+static void intel_spi_pci_remove(struct pci_dev *pdev)
+{
+ intel_spi_remove(pci_get_drvdata(pdev));
+}
+
+static const struct pci_device_id intel_spi_pci_ids[] = {
+ { PCI_VDEVICE(INTEL, 0x02a4), (unsigned long)&bxt_info },
+ { PCI_VDEVICE(INTEL, 0x06a4), (unsigned long)&bxt_info },
+ { PCI_VDEVICE(INTEL, 0x18e0), (unsigned long)&bxt_info },
+ { PCI_VDEVICE(INTEL, 0x19e0), (unsigned long)&bxt_info },
+ { PCI_VDEVICE(INTEL, 0x34a4), (unsigned long)&bxt_info },
+ { PCI_VDEVICE(INTEL, 0x4b24), (unsigned long)&bxt_info },
+ { PCI_VDEVICE(INTEL, 0x4da4), (unsigned long)&bxt_info },
+ { PCI_VDEVICE(INTEL, 0xa0a4), (unsigned long)&bxt_info },
+ { PCI_VDEVICE(INTEL, 0xa1a4), (unsigned long)&bxt_info },
+ { PCI_VDEVICE(INTEL, 0xa224), (unsigned long)&bxt_info },
+ { PCI_VDEVICE(INTEL, 0xa324), (unsigned long)&cnl_info },
+ { PCI_VDEVICE(INTEL, 0xa3a4), (unsigned long)&bxt_info },
+ { },
+};
+MODULE_DEVICE_TABLE(pci, intel_spi_pci_ids);
+
+static struct pci_driver intel_spi_pci_driver = {
+ .name = "intel-spi",
+ .id_table = intel_spi_pci_ids,
+ .probe = intel_spi_pci_probe,
+ .remove = intel_spi_pci_remove,
+};
+
+module_pci_driver(intel_spi_pci_driver);
+
+MODULE_DESCRIPTION("Intel PCH/PCU SPI flash PCI driver");
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel PCH/PCU SPI flash platform driver.
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ */
+
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "intel-spi.h"
+
+static int intel_spi_platform_probe(struct platform_device *pdev)
+{
+ struct intel_spi_boardinfo *info;
+ struct intel_spi *ispi;
+ struct resource *mem;
+
+ info = dev_get_platdata(&pdev->dev);
+ if (!info)
+ return -EINVAL;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ispi = intel_spi_probe(&pdev->dev, mem, info);
+ if (IS_ERR(ispi))
+ return PTR_ERR(ispi);
+
+ platform_set_drvdata(pdev, ispi);
+ return 0;
+}
+
+static int intel_spi_platform_remove(struct platform_device *pdev)
+{
+ struct intel_spi *ispi = platform_get_drvdata(pdev);
+
+ return intel_spi_remove(ispi);
+}
+
+static struct platform_driver intel_spi_platform_driver = {
+ .probe = intel_spi_platform_probe,
+ .remove = intel_spi_platform_remove,
+ .driver = {
+ .name = "intel-spi",
+ },
+};
+
+module_platform_driver(intel_spi_platform_driver);
+
+MODULE_DESCRIPTION("Intel PCH/PCU SPI flash platform driver");
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:intel-spi");
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel PCH/PCU SPI flash driver.
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/sizes.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/spi-nor.h>
+#include <linux/platform_data/intel-spi.h>
+
+#include "intel-spi.h"
+
+/* Offsets are from @ispi->base */
+#define BFPREG 0x00
+
+#define HSFSTS_CTL 0x04
+#define HSFSTS_CTL_FSMIE BIT(31)
+#define HSFSTS_CTL_FDBC_SHIFT 24
+#define HSFSTS_CTL_FDBC_MASK (0x3f << HSFSTS_CTL_FDBC_SHIFT)
+
+#define HSFSTS_CTL_FCYCLE_SHIFT 17
+#define HSFSTS_CTL_FCYCLE_MASK (0x0f << HSFSTS_CTL_FCYCLE_SHIFT)
+/* HW sequencer opcodes */
+#define HSFSTS_CTL_FCYCLE_READ (0x00 << HSFSTS_CTL_FCYCLE_SHIFT)
+#define HSFSTS_CTL_FCYCLE_WRITE (0x02 << HSFSTS_CTL_FCYCLE_SHIFT)
+#define HSFSTS_CTL_FCYCLE_ERASE (0x03 << HSFSTS_CTL_FCYCLE_SHIFT)
+#define HSFSTS_CTL_FCYCLE_ERASE_64K (0x04 << HSFSTS_CTL_FCYCLE_SHIFT)
+#define HSFSTS_CTL_FCYCLE_RDID (0x06 << HSFSTS_CTL_FCYCLE_SHIFT)
+#define HSFSTS_CTL_FCYCLE_WRSR (0x07 << HSFSTS_CTL_FCYCLE_SHIFT)
+#define HSFSTS_CTL_FCYCLE_RDSR (0x08 << HSFSTS_CTL_FCYCLE_SHIFT)
+
+#define HSFSTS_CTL_FGO BIT(16)
+#define HSFSTS_CTL_FLOCKDN BIT(15)
+#define HSFSTS_CTL_FDV BIT(14)
+#define HSFSTS_CTL_SCIP BIT(5)
+#define HSFSTS_CTL_AEL BIT(2)
+#define HSFSTS_CTL_FCERR BIT(1)
+#define HSFSTS_CTL_FDONE BIT(0)
+
+#define FADDR 0x08
+#define DLOCK 0x0c
+#define FDATA(n) (0x10 + ((n) * 4))
+
+#define FRACC 0x50
+
+#define FREG(n) (0x54 + ((n) * 4))
+#define FREG_BASE_MASK 0x3fff
+#define FREG_LIMIT_SHIFT 16
+#define FREG_LIMIT_MASK (0x03fff << FREG_LIMIT_SHIFT)
+
+/* Offset is from @ispi->pregs */
+#define PR(n) ((n) * 4)
+#define PR_WPE BIT(31)
+#define PR_LIMIT_SHIFT 16
+#define PR_LIMIT_MASK (0x3fff << PR_LIMIT_SHIFT)
+#define PR_RPE BIT(15)
+#define PR_BASE_MASK 0x3fff
+
+/* Offsets are from @ispi->sregs */
+#define SSFSTS_CTL 0x00
+#define SSFSTS_CTL_FSMIE BIT(23)
+#define SSFSTS_CTL_DS BIT(22)
+#define SSFSTS_CTL_DBC_SHIFT 16
+#define SSFSTS_CTL_SPOP BIT(11)
+#define SSFSTS_CTL_ACS BIT(10)
+#define SSFSTS_CTL_SCGO BIT(9)
+#define SSFSTS_CTL_COP_SHIFT 12
+#define SSFSTS_CTL_FRS BIT(7)
+#define SSFSTS_CTL_DOFRS BIT(6)
+#define SSFSTS_CTL_AEL BIT(4)
+#define SSFSTS_CTL_FCERR BIT(3)
+#define SSFSTS_CTL_FDONE BIT(2)
+#define SSFSTS_CTL_SCIP BIT(0)
+
+#define PREOP_OPTYPE 0x04
+#define OPMENU0 0x08
+#define OPMENU1 0x0c
+
+#define OPTYPE_READ_NO_ADDR 0
+#define OPTYPE_WRITE_NO_ADDR 1
+#define OPTYPE_READ_WITH_ADDR 2
+#define OPTYPE_WRITE_WITH_ADDR 3
+
+/* CPU specifics */
+#define BYT_PR 0x74
+#define BYT_SSFSTS_CTL 0x90
+#define BYT_BCR 0xfc
+#define BYT_BCR_WPD BIT(0)
+#define BYT_FREG_NUM 5
+#define BYT_PR_NUM 5
+
+#define LPT_PR 0x74
+#define LPT_SSFSTS_CTL 0x90
+#define LPT_FREG_NUM 5
+#define LPT_PR_NUM 5
+
+#define BXT_PR 0x84
+#define BXT_SSFSTS_CTL 0xa0
+#define BXT_FREG_NUM 12
+#define BXT_PR_NUM 6
+
+#define CNL_PR 0x84
+#define CNL_FREG_NUM 6
+#define CNL_PR_NUM 5
+
+#define LVSCC 0xc4
+#define UVSCC 0xc8
+#define ERASE_OPCODE_SHIFT 8
+#define ERASE_OPCODE_MASK (0xff << ERASE_OPCODE_SHIFT)
+#define ERASE_64K_OPCODE_SHIFT 16
+#define ERASE_64K_OPCODE_MASK (0xff << ERASE_OPCODE_SHIFT)
+
+#define INTEL_SPI_TIMEOUT 5000 /* ms */
+#define INTEL_SPI_FIFO_SZ 64
+
+/**
+ * struct intel_spi - Driver private data
+ * @dev: Device pointer
+ * @info: Pointer to board specific info
+ * @nor: SPI NOR layer structure
+ * @base: Beginning of MMIO space
+ * @pregs: Start of protection registers
+ * @sregs: Start of software sequencer registers
+ * @nregions: Maximum number of regions
+ * @pr_num: Maximum number of protected range registers
+ * @writeable: Is the chip writeable
+ * @locked: Is SPI setting locked
+ * @swseq_reg: Use SW sequencer in register reads/writes
+ * @swseq_erase: Use SW sequencer in erase operation
+ * @erase_64k: 64k erase supported
+ * @atomic_preopcode: Holds preopcode when atomic sequence is requested
+ * @opcodes: Opcodes which are supported. This are programmed by BIOS
+ * before it locks down the controller.
+ */
+struct intel_spi {
+ struct device *dev;
+ const struct intel_spi_boardinfo *info;
+ struct spi_nor nor;
+ void __iomem *base;
+ void __iomem *pregs;
+ void __iomem *sregs;
+ size_t nregions;
+ size_t pr_num;
+ bool writeable;
+ bool locked;
+ bool swseq_reg;
+ bool swseq_erase;
+ bool erase_64k;
+ u8 atomic_preopcode;
+ u8 opcodes[8];
+};
+
+static bool writeable;
+module_param(writeable, bool, 0);
+MODULE_PARM_DESC(writeable, "Enable write access to SPI flash chip (default=0)");
+
+static void intel_spi_dump_regs(struct intel_spi *ispi)
+{
+ u32 value;
+ int i;
+
+ dev_dbg(ispi->dev, "BFPREG=0x%08x\n", readl(ispi->base + BFPREG));
+
+ value = readl(ispi->base + HSFSTS_CTL);
+ dev_dbg(ispi->dev, "HSFSTS_CTL=0x%08x\n", value);
+ if (value & HSFSTS_CTL_FLOCKDN)
+ dev_dbg(ispi->dev, "-> Locked\n");
+
+ dev_dbg(ispi->dev, "FADDR=0x%08x\n", readl(ispi->base + FADDR));
+ dev_dbg(ispi->dev, "DLOCK=0x%08x\n", readl(ispi->base + DLOCK));
+
+ for (i = 0; i < 16; i++)
+ dev_dbg(ispi->dev, "FDATA(%d)=0x%08x\n",
+ i, readl(ispi->base + FDATA(i)));
+
+ dev_dbg(ispi->dev, "FRACC=0x%08x\n", readl(ispi->base + FRACC));
+
+ for (i = 0; i < ispi->nregions; i++)
+ dev_dbg(ispi->dev, "FREG(%d)=0x%08x\n", i,
+ readl(ispi->base + FREG(i)));
+ for (i = 0; i < ispi->pr_num; i++)
+ dev_dbg(ispi->dev, "PR(%d)=0x%08x\n", i,
+ readl(ispi->pregs + PR(i)));
+
+ if (ispi->sregs) {
+ value = readl(ispi->sregs + SSFSTS_CTL);
+ dev_dbg(ispi->dev, "SSFSTS_CTL=0x%08x\n", value);
+ dev_dbg(ispi->dev, "PREOP_OPTYPE=0x%08x\n",
+ readl(ispi->sregs + PREOP_OPTYPE));
+ dev_dbg(ispi->dev, "OPMENU0=0x%08x\n",
+ readl(ispi->sregs + OPMENU0));
+ dev_dbg(ispi->dev, "OPMENU1=0x%08x\n",
+ readl(ispi->sregs + OPMENU1));
+ }
+
+ if (ispi->info->type == INTEL_SPI_BYT)
+ dev_dbg(ispi->dev, "BCR=0x%08x\n", readl(ispi->base + BYT_BCR));
+
+ dev_dbg(ispi->dev, "LVSCC=0x%08x\n", readl(ispi->base + LVSCC));
+ dev_dbg(ispi->dev, "UVSCC=0x%08x\n", readl(ispi->base + UVSCC));
+
+ dev_dbg(ispi->dev, "Protected regions:\n");
+ for (i = 0; i < ispi->pr_num; i++) {
+ u32 base, limit;
+
+ value = readl(ispi->pregs + PR(i));
+ if (!(value & (PR_WPE | PR_RPE)))
+ continue;
+
+ limit = (value & PR_LIMIT_MASK) >> PR_LIMIT_SHIFT;
+ base = value & PR_BASE_MASK;
+
+ dev_dbg(ispi->dev, " %02d base: 0x%08x limit: 0x%08x [%c%c]\n",
+ i, base << 12, (limit << 12) | 0xfff,
+ value & PR_WPE ? 'W' : '.',
+ value & PR_RPE ? 'R' : '.');
+ }
+
+ dev_dbg(ispi->dev, "Flash regions:\n");
+ for (i = 0; i < ispi->nregions; i++) {
+ u32 region, base, limit;
+
+ region = readl(ispi->base + FREG(i));
+ base = region & FREG_BASE_MASK;
+ limit = (region & FREG_LIMIT_MASK) >> FREG_LIMIT_SHIFT;
+
+ if (base >= limit || (i > 0 && limit == 0))
+ dev_dbg(ispi->dev, " %02d disabled\n", i);
+ else
+ dev_dbg(ispi->dev, " %02d base: 0x%08x limit: 0x%08x\n",
+ i, base << 12, (limit << 12) | 0xfff);
+ }
+
+ dev_dbg(ispi->dev, "Using %cW sequencer for register access\n",
+ ispi->swseq_reg ? 'S' : 'H');
+ dev_dbg(ispi->dev, "Using %cW sequencer for erase operation\n",
+ ispi->swseq_erase ? 'S' : 'H');
+}
+
+/* Reads max INTEL_SPI_FIFO_SZ bytes from the device fifo */
+static int intel_spi_read_block(struct intel_spi *ispi, void *buf, size_t size)
+{
+ size_t bytes;
+ int i = 0;
+
+ if (size > INTEL_SPI_FIFO_SZ)
+ return -EINVAL;
+
+ while (size > 0) {
+ bytes = min_t(size_t, size, 4);
+ memcpy_fromio(buf, ispi->base + FDATA(i), bytes);
+ size -= bytes;
+ buf += bytes;
+ i++;
+ }
+
+ return 0;
+}
+
+/* Writes max INTEL_SPI_FIFO_SZ bytes to the device fifo */
+static int intel_spi_write_block(struct intel_spi *ispi, const void *buf,
+ size_t size)
+{
+ size_t bytes;
+ int i = 0;
+
+ if (size > INTEL_SPI_FIFO_SZ)
+ return -EINVAL;
+
+ while (size > 0) {
+ bytes = min_t(size_t, size, 4);
+ memcpy_toio(ispi->base + FDATA(i), buf, bytes);
+ size -= bytes;
+ buf += bytes;
+ i++;
+ }
+
+ return 0;
+}
+
+static int intel_spi_wait_hw_busy(struct intel_spi *ispi)
+{
+ u32 val;
+
+ return readl_poll_timeout(ispi->base + HSFSTS_CTL, val,
+ !(val & HSFSTS_CTL_SCIP), 40,
+ INTEL_SPI_TIMEOUT * 1000);
+}
+
+static int intel_spi_wait_sw_busy(struct intel_spi *ispi)
+{
+ u32 val;
+
+ return readl_poll_timeout(ispi->sregs + SSFSTS_CTL, val,
+ !(val & SSFSTS_CTL_SCIP), 40,
+ INTEL_SPI_TIMEOUT * 1000);
+}
+
+static int intel_spi_init(struct intel_spi *ispi)
+{
+ u32 opmenu0, opmenu1, lvscc, uvscc, val;
+ int i;
+
+ switch (ispi->info->type) {
+ case INTEL_SPI_BYT:
+ ispi->sregs = ispi->base + BYT_SSFSTS_CTL;
+ ispi->pregs = ispi->base + BYT_PR;
+ ispi->nregions = BYT_FREG_NUM;
+ ispi->pr_num = BYT_PR_NUM;
+ ispi->swseq_reg = true;
+
+ if (writeable) {
+ /* Disable write protection */
+ val = readl(ispi->base + BYT_BCR);
+ if (!(val & BYT_BCR_WPD)) {
+ val |= BYT_BCR_WPD;
+ writel(val, ispi->base + BYT_BCR);
+ val = readl(ispi->base + BYT_BCR);
+ }
+
+ ispi->writeable = !!(val & BYT_BCR_WPD);
+ }
+
+ break;
+
+ case INTEL_SPI_LPT:
+ ispi->sregs = ispi->base + LPT_SSFSTS_CTL;
+ ispi->pregs = ispi->base + LPT_PR;
+ ispi->nregions = LPT_FREG_NUM;
+ ispi->pr_num = LPT_PR_NUM;
+ ispi->swseq_reg = true;
+ break;
+
+ case INTEL_SPI_BXT:
+ ispi->sregs = ispi->base + BXT_SSFSTS_CTL;
+ ispi->pregs = ispi->base + BXT_PR;
+ ispi->nregions = BXT_FREG_NUM;
+ ispi->pr_num = BXT_PR_NUM;
+ ispi->erase_64k = true;
+ break;
+
+ case INTEL_SPI_CNL:
+ ispi->sregs = NULL;
+ ispi->pregs = ispi->base + CNL_PR;
+ ispi->nregions = CNL_FREG_NUM;
+ ispi->pr_num = CNL_PR_NUM;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ /* Disable #SMI generation from HW sequencer */
+ val = readl(ispi->base + HSFSTS_CTL);
+ val &= ~HSFSTS_CTL_FSMIE;
+ writel(val, ispi->base + HSFSTS_CTL);
+
+ /*
+ * Determine whether erase operation should use HW or SW sequencer.
+ *
+ * The HW sequencer has a predefined list of opcodes, with only the
+ * erase opcode being programmable in LVSCC and UVSCC registers.
+ * If these registers don't contain a valid erase opcode, erase
+ * cannot be done using HW sequencer.
+ */
+ lvscc = readl(ispi->base + LVSCC);
+ uvscc = readl(ispi->base + UVSCC);
+ if (!(lvscc & ERASE_OPCODE_MASK) || !(uvscc & ERASE_OPCODE_MASK))
+ ispi->swseq_erase = true;
+ /* SPI controller on Intel BXT supports 64K erase opcode */
+ if (ispi->info->type == INTEL_SPI_BXT && !ispi->swseq_erase)
+ if (!(lvscc & ERASE_64K_OPCODE_MASK) ||
+ !(uvscc & ERASE_64K_OPCODE_MASK))
+ ispi->erase_64k = false;
+
+ if (ispi->sregs == NULL && (ispi->swseq_reg || ispi->swseq_erase)) {
+ dev_err(ispi->dev, "software sequencer not supported, but required\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Some controllers can only do basic operations using hardware
+ * sequencer. All other operations are supposed to be carried out
+ * using software sequencer.
+ */
+ if (ispi->swseq_reg) {
+ /* Disable #SMI generation from SW sequencer */
+ val = readl(ispi->sregs + SSFSTS_CTL);
+ val &= ~SSFSTS_CTL_FSMIE;
+ writel(val, ispi->sregs + SSFSTS_CTL);
+ }
+
+ /* Check controller's lock status */
+ val = readl(ispi->base + HSFSTS_CTL);
+ ispi->locked = !!(val & HSFSTS_CTL_FLOCKDN);
+
+ if (ispi->locked && ispi->sregs) {
+ /*
+ * BIOS programs allowed opcodes and then locks down the
+ * register. So read back what opcodes it decided to support.
+ * That's the set we are going to support as well.
+ */
+ opmenu0 = readl(ispi->sregs + OPMENU0);
+ opmenu1 = readl(ispi->sregs + OPMENU1);
+
+ if (opmenu0 && opmenu1) {
+ for (i = 0; i < ARRAY_SIZE(ispi->opcodes) / 2; i++) {
+ ispi->opcodes[i] = opmenu0 >> i * 8;
+ ispi->opcodes[i + 4] = opmenu1 >> i * 8;
+ }
+ }
+ }
+
+ intel_spi_dump_regs(ispi);
+
+ return 0;
+}
+
+static int intel_spi_opcode_index(struct intel_spi *ispi, u8 opcode, int optype)
+{
+ int i;
+ int preop;
+
+ if (ispi->locked) {
+ for (i = 0; i < ARRAY_SIZE(ispi->opcodes); i++)
+ if (ispi->opcodes[i] == opcode)
+ return i;
+
+ return -EINVAL;
+ }
+
+ /* The lock is off, so just use index 0 */
+ writel(opcode, ispi->sregs + OPMENU0);
+ preop = readw(ispi->sregs + PREOP_OPTYPE);
+ writel(optype << 16 | preop, ispi->sregs + PREOP_OPTYPE);
+
+ return 0;
+}
+
+static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, size_t len)
+{
+ u32 val, status;
+ int ret;
+
+ val = readl(ispi->base + HSFSTS_CTL);
+ val &= ~(HSFSTS_CTL_FCYCLE_MASK | HSFSTS_CTL_FDBC_MASK);
+
+ switch (opcode) {
+ case SPINOR_OP_RDID:
+ val |= HSFSTS_CTL_FCYCLE_RDID;
+ break;
+ case SPINOR_OP_WRSR:
+ val |= HSFSTS_CTL_FCYCLE_WRSR;
+ break;
+ case SPINOR_OP_RDSR:
+ val |= HSFSTS_CTL_FCYCLE_RDSR;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (len > INTEL_SPI_FIFO_SZ)
+ return -EINVAL;
+
+ val |= (len - 1) << HSFSTS_CTL_FDBC_SHIFT;
+ val |= HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE;
+ val |= HSFSTS_CTL_FGO;
+ writel(val, ispi->base + HSFSTS_CTL);
+
+ ret = intel_spi_wait_hw_busy(ispi);
+ if (ret)
+ return ret;
+
+ status = readl(ispi->base + HSFSTS_CTL);
+ if (status & HSFSTS_CTL_FCERR)
+ return -EIO;
+ else if (status & HSFSTS_CTL_AEL)
+ return -EACCES;
+
+ return 0;
+}
+
+static int intel_spi_sw_cycle(struct intel_spi *ispi, u8 opcode, size_t len,
+ int optype)
+{
+ u32 val = 0, status;
+ u8 atomic_preopcode;
+ int ret;
+
+ ret = intel_spi_opcode_index(ispi, opcode, optype);
+ if (ret < 0)
+ return ret;
+
+ if (len > INTEL_SPI_FIFO_SZ)
+ return -EINVAL;
+
+ /*
+ * Always clear it after each SW sequencer operation regardless
+ * of whether it is successful or not.
+ */
+ atomic_preopcode = ispi->atomic_preopcode;
+ ispi->atomic_preopcode = 0;
+
+ /* Only mark 'Data Cycle' bit when there is data to be transferred */
+ if (len > 0)
+ val = ((len - 1) << SSFSTS_CTL_DBC_SHIFT) | SSFSTS_CTL_DS;
+ val |= ret << SSFSTS_CTL_COP_SHIFT;
+ val |= SSFSTS_CTL_FCERR | SSFSTS_CTL_FDONE;
+ val |= SSFSTS_CTL_SCGO;
+ if (atomic_preopcode) {
+ u16 preop;
+
+ switch (optype) {
+ case OPTYPE_WRITE_NO_ADDR:
+ case OPTYPE_WRITE_WITH_ADDR:
+ /* Pick matching preopcode for the atomic sequence */
+ preop = readw(ispi->sregs + PREOP_OPTYPE);
+ if ((preop & 0xff) == atomic_preopcode)
+ ; /* Do nothing */
+ else if ((preop >> 8) == atomic_preopcode)
+ val |= SSFSTS_CTL_SPOP;
+ else
+ return -EINVAL;
+
+ /* Enable atomic sequence */
+ val |= SSFSTS_CTL_ACS;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ }
+ writel(val, ispi->sregs + SSFSTS_CTL);
+
+ ret = intel_spi_wait_sw_busy(ispi);
+ if (ret)
+ return ret;
+
+ status = readl(ispi->sregs + SSFSTS_CTL);
+ if (status & SSFSTS_CTL_FCERR)
+ return -EIO;
+ else if (status & SSFSTS_CTL_AEL)
+ return -EACCES;
+
+ return 0;
+}
+
+static int intel_spi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
+ size_t len)
+{
+ struct intel_spi *ispi = nor->priv;
+ int ret;
+
+ /* Address of the first chip */
+ writel(0, ispi->base + FADDR);
+
+ if (ispi->swseq_reg)
+ ret = intel_spi_sw_cycle(ispi, opcode, len,
+ OPTYPE_READ_NO_ADDR);
+ else
+ ret = intel_spi_hw_cycle(ispi, opcode, len);
+
+ if (ret)
+ return ret;
+
+ return intel_spi_read_block(ispi, buf, len);
+}
+
+static int intel_spi_write_reg(struct spi_nor *nor, u8 opcode, const u8 *buf,
+ size_t len)
+{
+ struct intel_spi *ispi = nor->priv;
+ int ret;
+
+ /*
+ * This is handled with atomic operation and preop code in Intel
+ * controller so we only verify that it is available. If the
+ * controller is not locked, program the opcode to the PREOP
+ * register for later use.
+ *
+ * When hardware sequencer is used there is no need to program
+ * any opcodes (it handles them automatically as part of a command).
+ */
+ if (opcode == SPINOR_OP_WREN) {
+ u16 preop;
+
+ if (!ispi->swseq_reg)
+ return 0;
+
+ preop = readw(ispi->sregs + PREOP_OPTYPE);
+ if ((preop & 0xff) != opcode && (preop >> 8) != opcode) {
+ if (ispi->locked)
+ return -EINVAL;
+ writel(opcode, ispi->sregs + PREOP_OPTYPE);
+ }
+
+ /*
+ * This enables atomic sequence on next SW sycle. Will
+ * be cleared after next operation.
+ */
+ ispi->atomic_preopcode = opcode;
+ return 0;
+ }
+
+ writel(0, ispi->base + FADDR);
+
+ /* Write the value beforehand */
+ ret = intel_spi_write_block(ispi, buf, len);
+ if (ret)
+ return ret;
+
+ if (ispi->swseq_reg)
+ return intel_spi_sw_cycle(ispi, opcode, len,
+ OPTYPE_WRITE_NO_ADDR);
+ return intel_spi_hw_cycle(ispi, opcode, len);
+}
+
+static ssize_t intel_spi_read(struct spi_nor *nor, loff_t from, size_t len,
+ u_char *read_buf)
+{
+ struct intel_spi *ispi = nor->priv;
+ size_t block_size, retlen = 0;
+ u32 val, status;
+ ssize_t ret;
+
+ /*
+ * Atomic sequence is not expected with HW sequencer reads. Make
+ * sure it is cleared regardless.
+ */
+ if (WARN_ON_ONCE(ispi->atomic_preopcode))
+ ispi->atomic_preopcode = 0;
+
+ switch (nor->read_opcode) {
+ case SPINOR_OP_READ:
+ case SPINOR_OP_READ_FAST:
+ case SPINOR_OP_READ_4B:
+ case SPINOR_OP_READ_FAST_4B:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ while (len > 0) {
+ block_size = min_t(size_t, len, INTEL_SPI_FIFO_SZ);
+
+ /* Read cannot cross 4K boundary */
+ block_size = min_t(loff_t, from + block_size,
+ round_up(from + 1, SZ_4K)) - from;
+
+ writel(from, ispi->base + FADDR);
+
+ val = readl(ispi->base + HSFSTS_CTL);
+ val &= ~(HSFSTS_CTL_FDBC_MASK | HSFSTS_CTL_FCYCLE_MASK);
+ val |= HSFSTS_CTL_AEL | HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE;
+ val |= (block_size - 1) << HSFSTS_CTL_FDBC_SHIFT;
+ val |= HSFSTS_CTL_FCYCLE_READ;
+ val |= HSFSTS_CTL_FGO;
+ writel(val, ispi->base + HSFSTS_CTL);
+
+ ret = intel_spi_wait_hw_busy(ispi);
+ if (ret)
+ return ret;
+
+ status = readl(ispi->base + HSFSTS_CTL);
+ if (status & HSFSTS_CTL_FCERR)
+ ret = -EIO;
+ else if (status & HSFSTS_CTL_AEL)
+ ret = -EACCES;
+
+ if (ret < 0) {
+ dev_err(ispi->dev, "read error: %llx: %#x\n", from,
+ status);
+ return ret;
+ }
+
+ ret = intel_spi_read_block(ispi, read_buf, block_size);
+ if (ret)
+ return ret;
+
+ len -= block_size;
+ from += block_size;
+ retlen += block_size;
+ read_buf += block_size;
+ }
+
+ return retlen;
+}
+
+static ssize_t intel_spi_write(struct spi_nor *nor, loff_t to, size_t len,
+ const u_char *write_buf)
+{
+ struct intel_spi *ispi = nor->priv;
+ size_t block_size, retlen = 0;
+ u32 val, status;
+ ssize_t ret;
+
+ /* Not needed with HW sequencer write, make sure it is cleared */
+ ispi->atomic_preopcode = 0;
+
+ while (len > 0) {
+ block_size = min_t(size_t, len, INTEL_SPI_FIFO_SZ);
+
+ /* Write cannot cross 4K boundary */
+ block_size = min_t(loff_t, to + block_size,
+ round_up(to + 1, SZ_4K)) - to;
+
+ writel(to, ispi->base + FADDR);
+
+ val = readl(ispi->base + HSFSTS_CTL);
+ val &= ~(HSFSTS_CTL_FDBC_MASK | HSFSTS_CTL_FCYCLE_MASK);
+ val |= HSFSTS_CTL_AEL | HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE;
+ val |= (block_size - 1) << HSFSTS_CTL_FDBC_SHIFT;
+ val |= HSFSTS_CTL_FCYCLE_WRITE;
+
+ ret = intel_spi_write_block(ispi, write_buf, block_size);
+ if (ret) {
+ dev_err(ispi->dev, "failed to write block\n");
+ return ret;
+ }
+
+ /* Start the write now */
+ val |= HSFSTS_CTL_FGO;
+ writel(val, ispi->base + HSFSTS_CTL);
+
+ ret = intel_spi_wait_hw_busy(ispi);
+ if (ret) {
+ dev_err(ispi->dev, "timeout\n");
+ return ret;
+ }
+
+ status = readl(ispi->base + HSFSTS_CTL);
+ if (status & HSFSTS_CTL_FCERR)
+ ret = -EIO;
+ else if (status & HSFSTS_CTL_AEL)
+ ret = -EACCES;
+
+ if (ret < 0) {
+ dev_err(ispi->dev, "write error: %llx: %#x\n", to,
+ status);
+ return ret;
+ }
+
+ len -= block_size;
+ to += block_size;
+ retlen += block_size;
+ write_buf += block_size;
+ }
+
+ return retlen;
+}
+
+static int intel_spi_erase(struct spi_nor *nor, loff_t offs)
+{
+ size_t erase_size, len = nor->mtd.erasesize;
+ struct intel_spi *ispi = nor->priv;
+ u32 val, status, cmd;
+ int ret;
+
+ /* If the hardware can do 64k erase use that when possible */
+ if (len >= SZ_64K && ispi->erase_64k) {
+ cmd = HSFSTS_CTL_FCYCLE_ERASE_64K;
+ erase_size = SZ_64K;
+ } else {
+ cmd = HSFSTS_CTL_FCYCLE_ERASE;
+ erase_size = SZ_4K;
+ }
+
+ if (ispi->swseq_erase) {
+ while (len > 0) {
+ writel(offs, ispi->base + FADDR);
+
+ ret = intel_spi_sw_cycle(ispi, nor->erase_opcode,
+ 0, OPTYPE_WRITE_WITH_ADDR);
+ if (ret)
+ return ret;
+
+ offs += erase_size;
+ len -= erase_size;
+ }
+
+ return 0;
+ }
+
+ /* Not needed with HW sequencer erase, make sure it is cleared */
+ ispi->atomic_preopcode = 0;
+
+ while (len > 0) {
+ writel(offs, ispi->base + FADDR);
+
+ val = readl(ispi->base + HSFSTS_CTL);
+ val &= ~(HSFSTS_CTL_FDBC_MASK | HSFSTS_CTL_FCYCLE_MASK);
+ val |= HSFSTS_CTL_AEL | HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE;
+ val |= cmd;
+ val |= HSFSTS_CTL_FGO;
+ writel(val, ispi->base + HSFSTS_CTL);
+
+ ret = intel_spi_wait_hw_busy(ispi);
+ if (ret)
+ return ret;
+
+ status = readl(ispi->base + HSFSTS_CTL);
+ if (status & HSFSTS_CTL_FCERR)
+ return -EIO;
+ else if (status & HSFSTS_CTL_AEL)
+ return -EACCES;
+
+ offs += erase_size;
+ len -= erase_size;
+ }
+
+ return 0;
+}
+
+static bool intel_spi_is_protected(const struct intel_spi *ispi,
+ unsigned int base, unsigned int limit)
+{
+ int i;
+
+ for (i = 0; i < ispi->pr_num; i++) {
+ u32 pr_base, pr_limit, pr_value;
+
+ pr_value = readl(ispi->pregs + PR(i));
+ if (!(pr_value & (PR_WPE | PR_RPE)))
+ continue;
+
+ pr_limit = (pr_value & PR_LIMIT_MASK) >> PR_LIMIT_SHIFT;
+ pr_base = pr_value & PR_BASE_MASK;
+
+ if (pr_base >= base && pr_limit <= limit)
+ return true;
+ }
+
+ return false;
+}
+
+/*
+ * There will be a single partition holding all enabled flash regions. We
+ * call this "BIOS".
+ */
+static void intel_spi_fill_partition(struct intel_spi *ispi,
+ struct mtd_partition *part)
+{
+ u64 end;
+ int i;
+
+ memset(part, 0, sizeof(*part));
+
+ /* Start from the mandatory descriptor region */
+ part->size = 4096;
+ part->name = "BIOS";
+
+ /*
+ * Now try to find where this partition ends based on the flash
+ * region registers.
+ */
+ for (i = 1; i < ispi->nregions; i++) {
+ u32 region, base, limit;
+
+ region = readl(ispi->base + FREG(i));
+ base = region & FREG_BASE_MASK;
+ limit = (region & FREG_LIMIT_MASK) >> FREG_LIMIT_SHIFT;
+
+ if (base >= limit || limit == 0)
+ continue;
+
+ /*
+ * If any of the regions have protection bits set, make the
+ * whole partition read-only to be on the safe side.
+ */
+ if (intel_spi_is_protected(ispi, base, limit))
+ ispi->writeable = false;
+
+ end = (limit << 12) + 4096;
+ if (end > part->size)
+ part->size = end;
+ }
+}
+
+static const struct spi_nor_controller_ops intel_spi_controller_ops = {
+ .read_reg = intel_spi_read_reg,
+ .write_reg = intel_spi_write_reg,
+ .read = intel_spi_read,
+ .write = intel_spi_write,
+ .erase = intel_spi_erase,
+};
+
+struct intel_spi *intel_spi_probe(struct device *dev,
+ struct resource *mem, const struct intel_spi_boardinfo *info)
+{
+ const struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ |
+ SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_PP,
+ };
+ struct mtd_partition part;
+ struct intel_spi *ispi;
+ int ret;
+
+ if (!info || !mem)
+ return ERR_PTR(-EINVAL);
+
+ ispi = devm_kzalloc(dev, sizeof(*ispi), GFP_KERNEL);
+ if (!ispi)
+ return ERR_PTR(-ENOMEM);
+
+ ispi->base = devm_ioremap_resource(dev, mem);
+ if (IS_ERR(ispi->base))
+ return ERR_CAST(ispi->base);
+
+ ispi->dev = dev;
+ ispi->info = info;
+ ispi->writeable = info->writeable;
+
+ ret = intel_spi_init(ispi);
+ if (ret)
+ return ERR_PTR(ret);
+
+ ispi->nor.dev = ispi->dev;
+ ispi->nor.priv = ispi;
+ ispi->nor.controller_ops = &intel_spi_controller_ops;
+
+ ret = spi_nor_scan(&ispi->nor, NULL, &hwcaps);
+ if (ret) {
+ dev_info(dev, "failed to locate the chip\n");
+ return ERR_PTR(ret);
+ }
+
+ intel_spi_fill_partition(ispi, &part);
+
+ /* Prevent writes if not explicitly enabled */
+ if (!ispi->writeable || !writeable)
+ ispi->nor.mtd.flags &= ~MTD_WRITEABLE;
+
+ ret = mtd_device_register(&ispi->nor.mtd, &part, 1);
+ if (ret)
+ return ERR_PTR(ret);
+
+ return ispi;
+}
+EXPORT_SYMBOL_GPL(intel_spi_probe);
+
+int intel_spi_remove(struct intel_spi *ispi)
+{
+ return mtd_device_unregister(&ispi->nor.mtd);
+}
+EXPORT_SYMBOL_GPL(intel_spi_remove);
+
+MODULE_DESCRIPTION("Intel PCH/PCU SPI flash core driver");
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Intel PCH/PCU SPI flash driver.
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ */
+
+#ifndef INTEL_SPI_H
+#define INTEL_SPI_H
+
+#include <linux/platform_data/intel-spi.h>
+
+struct intel_spi;
+struct resource;
+
+struct intel_spi *intel_spi_probe(struct device *dev,
+ struct resource *mem, const struct intel_spi_boardinfo *info);
+int intel_spi_remove(struct intel_spi *ispi);
+
+#endif /* INTEL_SPI_H */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * SPI-NOR driver for NXP SPI Flash Interface (SPIFI)
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Based on Freescale QuadSPI driver:
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/spi-nor.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+/* NXP SPIFI registers, bits and macros */
+#define SPIFI_CTRL 0x000
+#define SPIFI_CTRL_TIMEOUT(timeout) (timeout)
+#define SPIFI_CTRL_CSHIGH(cshigh) ((cshigh) << 16)
+#define SPIFI_CTRL_MODE3 BIT(23)
+#define SPIFI_CTRL_DUAL BIT(28)
+#define SPIFI_CTRL_FBCLK BIT(30)
+#define SPIFI_CMD 0x004
+#define SPIFI_CMD_DATALEN(dlen) ((dlen) & 0x3fff)
+#define SPIFI_CMD_DOUT BIT(15)
+#define SPIFI_CMD_INTLEN(ilen) ((ilen) << 16)
+#define SPIFI_CMD_FIELDFORM(field) ((field) << 19)
+#define SPIFI_CMD_FIELDFORM_ALL_SERIAL SPIFI_CMD_FIELDFORM(0x0)
+#define SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA SPIFI_CMD_FIELDFORM(0x1)
+#define SPIFI_CMD_FRAMEFORM(frame) ((frame) << 21)
+#define SPIFI_CMD_FRAMEFORM_OPCODE_ONLY SPIFI_CMD_FRAMEFORM(0x1)
+#define SPIFI_CMD_OPCODE(op) ((op) << 24)
+#define SPIFI_ADDR 0x008
+#define SPIFI_IDATA 0x00c
+#define SPIFI_CLIMIT 0x010
+#define SPIFI_DATA 0x014
+#define SPIFI_MCMD 0x018
+#define SPIFI_STAT 0x01c
+#define SPIFI_STAT_MCINIT BIT(0)
+#define SPIFI_STAT_CMD BIT(1)
+#define SPIFI_STAT_RESET BIT(4)
+
+#define SPI_NOR_MAX_ID_LEN 6
+
+struct nxp_spifi {
+ struct device *dev;
+ struct clk *clk_spifi;
+ struct clk *clk_reg;
+ void __iomem *io_base;
+ void __iomem *flash_base;
+ struct spi_nor nor;
+ bool memory_mode;
+ u32 mcmd;
+};
+
+static int nxp_spifi_wait_for_cmd(struct nxp_spifi *spifi)
+{
+ u8 stat;
+ int ret;
+
+ ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat,
+ !(stat & SPIFI_STAT_CMD), 10, 30);
+ if (ret)
+ dev_warn(spifi->dev, "command timed out\n");
+
+ return ret;
+}
+
+static int nxp_spifi_reset(struct nxp_spifi *spifi)
+{
+ u8 stat;
+ int ret;
+
+ writel(SPIFI_STAT_RESET, spifi->io_base + SPIFI_STAT);
+ ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat,
+ !(stat & SPIFI_STAT_RESET), 10, 30);
+ if (ret)
+ dev_warn(spifi->dev, "state reset timed out\n");
+
+ return ret;
+}
+
+static int nxp_spifi_set_memory_mode_off(struct nxp_spifi *spifi)
+{
+ int ret;
+
+ if (!spifi->memory_mode)
+ return 0;
+
+ ret = nxp_spifi_reset(spifi);
+ if (ret)
+ dev_err(spifi->dev, "unable to enter command mode\n");
+ else
+ spifi->memory_mode = false;
+
+ return ret;
+}
+
+static int nxp_spifi_set_memory_mode_on(struct nxp_spifi *spifi)
+{
+ u8 stat;
+ int ret;
+
+ if (spifi->memory_mode)
+ return 0;
+
+ writel(spifi->mcmd, spifi->io_base + SPIFI_MCMD);
+ ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat,
+ stat & SPIFI_STAT_MCINIT, 10, 30);
+ if (ret)
+ dev_err(spifi->dev, "unable to enter memory mode\n");
+ else
+ spifi->memory_mode = true;
+
+ return ret;
+}
+
+static int nxp_spifi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
+ size_t len)
+{
+ struct nxp_spifi *spifi = nor->priv;
+ u32 cmd;
+ int ret;
+
+ ret = nxp_spifi_set_memory_mode_off(spifi);
+ if (ret)
+ return ret;
+
+ cmd = SPIFI_CMD_DATALEN(len) |
+ SPIFI_CMD_OPCODE(opcode) |
+ SPIFI_CMD_FIELDFORM_ALL_SERIAL |
+ SPIFI_CMD_FRAMEFORM_OPCODE_ONLY;
+ writel(cmd, spifi->io_base + SPIFI_CMD);
+
+ while (len--)
+ *buf++ = readb(spifi->io_base + SPIFI_DATA);
+
+ return nxp_spifi_wait_for_cmd(spifi);
+}
+
+static int nxp_spifi_write_reg(struct spi_nor *nor, u8 opcode, const u8 *buf,
+ size_t len)
+{
+ struct nxp_spifi *spifi = nor->priv;
+ u32 cmd;
+ int ret;
+
+ ret = nxp_spifi_set_memory_mode_off(spifi);
+ if (ret)
+ return ret;
+
+ cmd = SPIFI_CMD_DOUT |
+ SPIFI_CMD_DATALEN(len) |
+ SPIFI_CMD_OPCODE(opcode) |
+ SPIFI_CMD_FIELDFORM_ALL_SERIAL |
+ SPIFI_CMD_FRAMEFORM_OPCODE_ONLY;
+ writel(cmd, spifi->io_base + SPIFI_CMD);
+
+ while (len--)
+ writeb(*buf++, spifi->io_base + SPIFI_DATA);
+
+ return nxp_spifi_wait_for_cmd(spifi);
+}
+
+static ssize_t nxp_spifi_read(struct spi_nor *nor, loff_t from, size_t len,
+ u_char *buf)
+{
+ struct nxp_spifi *spifi = nor->priv;
+ int ret;
+
+ ret = nxp_spifi_set_memory_mode_on(spifi);
+ if (ret)
+ return ret;
+
+ memcpy_fromio(buf, spifi->flash_base + from, len);
+
+ return len;
+}
+
+static ssize_t nxp_spifi_write(struct spi_nor *nor, loff_t to, size_t len,
+ const u_char *buf)
+{
+ struct nxp_spifi *spifi = nor->priv;
+ u32 cmd;
+ int ret;
+ size_t i;
+
+ ret = nxp_spifi_set_memory_mode_off(spifi);
+ if (ret)
+ return ret;
+
+ writel(to, spifi->io_base + SPIFI_ADDR);
+
+ cmd = SPIFI_CMD_DOUT |
+ SPIFI_CMD_DATALEN(len) |
+ SPIFI_CMD_FIELDFORM_ALL_SERIAL |
+ SPIFI_CMD_OPCODE(nor->program_opcode) |
+ SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
+ writel(cmd, spifi->io_base + SPIFI_CMD);
+
+ for (i = 0; i < len; i++)
+ writeb(buf[i], spifi->io_base + SPIFI_DATA);
+
+ ret = nxp_spifi_wait_for_cmd(spifi);
+ if (ret)
+ return ret;
+
+ return len;
+}
+
+static int nxp_spifi_erase(struct spi_nor *nor, loff_t offs)
+{
+ struct nxp_spifi *spifi = nor->priv;
+ u32 cmd;
+ int ret;
+
+ ret = nxp_spifi_set_memory_mode_off(spifi);
+ if (ret)
+ return ret;
+
+ writel(offs, spifi->io_base + SPIFI_ADDR);
+
+ cmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL |
+ SPIFI_CMD_OPCODE(nor->erase_opcode) |
+ SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
+ writel(cmd, spifi->io_base + SPIFI_CMD);
+
+ return nxp_spifi_wait_for_cmd(spifi);
+}
+
+static int nxp_spifi_setup_memory_cmd(struct nxp_spifi *spifi)
+{
+ switch (spifi->nor.read_proto) {
+ case SNOR_PROTO_1_1_1:
+ spifi->mcmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL;
+ break;
+ case SNOR_PROTO_1_1_2:
+ case SNOR_PROTO_1_1_4:
+ spifi->mcmd = SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA;
+ break;
+ default:
+ dev_err(spifi->dev, "unsupported SPI read mode\n");
+ return -EINVAL;
+ }
+
+ /* Memory mode supports address length between 1 and 4 */
+ if (spifi->nor.addr_width < 1 || spifi->nor.addr_width > 4)
+ return -EINVAL;
+
+ spifi->mcmd |= SPIFI_CMD_OPCODE(spifi->nor.read_opcode) |
+ SPIFI_CMD_INTLEN(spifi->nor.read_dummy / 8) |
+ SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
+
+ return 0;
+}
+
+static void nxp_spifi_dummy_id_read(struct spi_nor *nor)
+{
+ u8 id[SPI_NOR_MAX_ID_LEN];
+ nor->controller_ops->read_reg(nor, SPINOR_OP_RDID, id,
+ SPI_NOR_MAX_ID_LEN);
+}
+
+static const struct spi_nor_controller_ops nxp_spifi_controller_ops = {
+ .read_reg = nxp_spifi_read_reg,
+ .write_reg = nxp_spifi_write_reg,
+ .read = nxp_spifi_read,
+ .write = nxp_spifi_write,
+ .erase = nxp_spifi_erase,
+};
+
+static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
+ struct device_node *np)
+{
+ struct spi_nor_hwcaps hwcaps = {
+ .mask = SNOR_HWCAPS_READ |
+ SNOR_HWCAPS_READ_FAST |
+ SNOR_HWCAPS_PP,
+ };
+ u32 ctrl, property;
+ u16 mode = 0;
+ int ret;
+
+ if (!of_property_read_u32(np, "spi-rx-bus-width", &property)) {
+ switch (property) {
+ case 1:
+ break;
+ case 2:
+ mode |= SPI_RX_DUAL;
+ break;
+ case 4:
+ mode |= SPI_RX_QUAD;
+ break;
+ default:
+ dev_err(spifi->dev, "unsupported rx-bus-width\n");
+ return -EINVAL;
+ }
+ }
+
+ if (of_find_property(np, "spi-cpha", NULL))
+ mode |= SPI_CPHA;
+
+ if (of_find_property(np, "spi-cpol", NULL))
+ mode |= SPI_CPOL;
+
+ /* Setup control register defaults */
+ ctrl = SPIFI_CTRL_TIMEOUT(1000) |
+ SPIFI_CTRL_CSHIGH(15) |
+ SPIFI_CTRL_FBCLK;
+
+ if (mode & SPI_RX_DUAL) {
+ ctrl |= SPIFI_CTRL_DUAL;
+ hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
+ } else if (mode & SPI_RX_QUAD) {
+ ctrl &= ~SPIFI_CTRL_DUAL;
+ hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
+ } else {
+ ctrl |= SPIFI_CTRL_DUAL;
+ }
+
+ switch (mode & (SPI_CPHA | SPI_CPOL)) {
+ case SPI_MODE_0:
+ ctrl &= ~SPIFI_CTRL_MODE3;
+ break;
+ case SPI_MODE_3:
+ ctrl |= SPIFI_CTRL_MODE3;
+ break;
+ default:
+ dev_err(spifi->dev, "only mode 0 and 3 supported\n");
+ return -EINVAL;
+ }
+
+ writel(ctrl, spifi->io_base + SPIFI_CTRL);
+
+ spifi->nor.dev = spifi->dev;
+ spi_nor_set_flash_node(&spifi->nor, np);
+ spifi->nor.priv = spifi;
+ spifi->nor.controller_ops = &nxp_spifi_controller_ops;
+
+ /*
+ * The first read on a hard reset isn't reliable so do a
+ * dummy read of the id before calling spi_nor_scan().
+ * The reason for this problem is unknown.
+ *
+ * The official NXP spifilib uses more or less the same
+ * workaround that is applied here by reading the device
+ * id multiple times.
+ */
+ nxp_spifi_dummy_id_read(&spifi->nor);
+
+ ret = spi_nor_scan(&spifi->nor, NULL, &hwcaps);
+ if (ret) {
+ dev_err(spifi->dev, "device scan failed\n");
+ return ret;
+ }
+
+ ret = nxp_spifi_setup_memory_cmd(spifi);
+ if (ret) {
+ dev_err(spifi->dev, "memory command setup failed\n");
+ return ret;
+ }
+
+ ret = mtd_device_register(&spifi->nor.mtd, NULL, 0);
+ if (ret) {
+ dev_err(spifi->dev, "mtd device parse failed\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int nxp_spifi_probe(struct platform_device *pdev)
+{
+ struct device_node *flash_np;
+ struct nxp_spifi *spifi;
+ struct resource *res;
+ int ret;
+
+ spifi = devm_kzalloc(&pdev->dev, sizeof(*spifi), GFP_KERNEL);
+ if (!spifi)
+ return -ENOMEM;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spifi");
+ spifi->io_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(spifi->io_base))
+ return PTR_ERR(spifi->io_base);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "flash");
+ spifi->flash_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(spifi->flash_base))
+ return PTR_ERR(spifi->flash_base);
+
+ spifi->clk_spifi = devm_clk_get(&pdev->dev, "spifi");
+ if (IS_ERR(spifi->clk_spifi)) {
+ dev_err(&pdev->dev, "spifi clock not found\n");
+ return PTR_ERR(spifi->clk_spifi);
+ }
+
+ spifi->clk_reg = devm_clk_get(&pdev->dev, "reg");
+ if (IS_ERR(spifi->clk_reg)) {
+ dev_err(&pdev->dev, "reg clock not found\n");
+ return PTR_ERR(spifi->clk_reg);
+ }
+
+ ret = clk_prepare_enable(spifi->clk_reg);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to enable reg clock\n");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(spifi->clk_spifi);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to enable spifi clock\n");
+ goto dis_clk_reg;
+ }
+
+ spifi->dev = &pdev->dev;
+ platform_set_drvdata(pdev, spifi);
+
+ /* Initialize and reset device */
+ nxp_spifi_reset(spifi);
+ writel(0, spifi->io_base + SPIFI_IDATA);
+ writel(0, spifi->io_base + SPIFI_MCMD);
+ nxp_spifi_reset(spifi);
+
+ flash_np = of_get_next_available_child(pdev->dev.of_node, NULL);
+ if (!flash_np) {
+ dev_err(&pdev->dev, "no SPI flash device to configure\n");
+ ret = -ENODEV;
+ goto dis_clks;
+ }
+
+ ret = nxp_spifi_setup_flash(spifi, flash_np);
+ of_node_put(flash_np);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to setup flash chip\n");
+ goto dis_clks;
+ }
+
+ return 0;
+
+dis_clks:
+ clk_disable_unprepare(spifi->clk_spifi);
+dis_clk_reg:
+ clk_disable_unprepare(spifi->clk_reg);
+ return ret;
+}
+
+static int nxp_spifi_remove(struct platform_device *pdev)
+{
+ struct nxp_spifi *spifi = platform_get_drvdata(pdev);
+
+ mtd_device_unregister(&spifi->nor.mtd);
+ clk_disable_unprepare(spifi->clk_spifi);
+ clk_disable_unprepare(spifi->clk_reg);
+
+ return 0;
+}
+
+static const struct of_device_id nxp_spifi_match[] = {
+ {.compatible = "nxp,lpc1773-spifi"},
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, nxp_spifi_match);
+
+static struct platform_driver nxp_spifi_driver = {
+ .probe = nxp_spifi_probe,
+ .remove = nxp_spifi_remove,
+ .driver = {
+ .name = "nxp-spifi",
+ .of_match_table = nxp_spifi_match,
+ },
+};
+module_platform_driver(nxp_spifi_driver);
+
+MODULE_DESCRIPTION("NXP SPI Flash Interface driver");
+MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Based on m25p80.c, by Mike Lavender (mike@steroidmicros.com), with
+ * influence from lart.c (Abraham Van Der Merwe) and mtd_dataflash.c
+ *
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/math64.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/of_platform.h>
+#include <linux/sched/task_stack.h>
+#include <linux/spi/flash.h>
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+/* Define max times to check status register before we give up. */
+
+/*
+ * For everything but full-chip erase; probably could be much smaller, but kept
+ * around for safety for now
+ */
+#define DEFAULT_READY_WAIT_JIFFIES (40UL * HZ)
+
+/*
+ * For full-chip erase, calibrated to a 2MB flash (M25P16); should be scaled up
+ * for larger flash
+ */
+#define CHIP_ERASE_2MB_READY_WAIT_JIFFIES (40UL * HZ)
+
+#define SPI_NOR_MAX_ADDR_WIDTH 4
+
+/**
+ * spi_nor_spimem_bounce() - check if a bounce buffer is needed for the data
+ * transfer
+ * @nor: pointer to 'struct spi_nor'
+ * @op: pointer to 'struct spi_mem_op' template for transfer
+ *
+ * If we have to use the bounce buffer, the data field in @op will be updated.
+ *
+ * Return: true if the bounce buffer is needed, false if not
+ */
+static bool spi_nor_spimem_bounce(struct spi_nor *nor, struct spi_mem_op *op)
+{
+ /* op->data.buf.in occupies the same memory as op->data.buf.out */
+ if (object_is_on_stack(op->data.buf.in) ||
+ !virt_addr_valid(op->data.buf.in)) {
+ if (op->data.nbytes > nor->bouncebuf_size)
+ op->data.nbytes = nor->bouncebuf_size;
+ op->data.buf.in = nor->bouncebuf;
+ return true;
+ }
+
+ return false;
+}
+
+/**
+ * spi_nor_spimem_exec_op() - execute a memory operation
+ * @nor: pointer to 'struct spi_nor'
+ * @op: pointer to 'struct spi_mem_op' template for transfer
+ *
+ * Return: 0 on success, -error otherwise.
+ */
+static int spi_nor_spimem_exec_op(struct spi_nor *nor, struct spi_mem_op *op)
+{
+ int error;
+
+ error = spi_mem_adjust_op_size(nor->spimem, op);
+ if (error)
+ return error;
+
+ return spi_mem_exec_op(nor->spimem, op);
+}
+
+/**
+ * spi_nor_spimem_read_data() - read data from flash's memory region via
+ * spi-mem
+ * @nor: pointer to 'struct spi_nor'
+ * @from: offset to read from
+ * @len: number of bytes to read
+ * @buf: pointer to dst buffer
+ *
+ * Return: number of bytes read successfully, -errno otherwise
+ */
+static ssize_t spi_nor_spimem_read_data(struct spi_nor *nor, loff_t from,
+ size_t len, u8 *buf)
+{
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 1),
+ SPI_MEM_OP_ADDR(nor->addr_width, from, 1),
+ SPI_MEM_OP_DUMMY(nor->read_dummy, 1),
+ SPI_MEM_OP_DATA_IN(len, buf, 1));
+ bool usebouncebuf;
+ ssize_t nbytes;
+ int error;
+
+ /* get transfer protocols. */
+ op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto);
+ op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto);
+ op.dummy.buswidth = op.addr.buswidth;
+ op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto);
+
+ /* convert the dummy cycles to the number of bytes */
+ op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8;
+
+ usebouncebuf = spi_nor_spimem_bounce(nor, &op);
+
+ if (nor->dirmap.rdesc) {
+ nbytes = spi_mem_dirmap_read(nor->dirmap.rdesc, op.addr.val,
+ op.data.nbytes, op.data.buf.in);
+ } else {
+ error = spi_nor_spimem_exec_op(nor, &op);
+ if (error)
+ return error;
+ nbytes = op.data.nbytes;
+ }
+
+ if (usebouncebuf && nbytes > 0)
+ memcpy(buf, op.data.buf.in, nbytes);
+
+ return nbytes;
+}
+
+/**
+ * spi_nor_read_data() - read data from flash memory
+ * @nor: pointer to 'struct spi_nor'
+ * @from: offset to read from
+ * @len: number of bytes to read
+ * @buf: pointer to dst buffer
+ *
+ * Return: number of bytes read successfully, -errno otherwise
+ */
+ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len, u8 *buf)
+{
+ if (nor->spimem)
+ return spi_nor_spimem_read_data(nor, from, len, buf);
+
+ return nor->controller_ops->read(nor, from, len, buf);
+}
+
+/**
+ * spi_nor_spimem_write_data() - write data to flash memory via
+ * spi-mem
+ * @nor: pointer to 'struct spi_nor'
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @buf: pointer to src buffer
+ *
+ * Return: number of bytes written successfully, -errno otherwise
+ */
+static ssize_t spi_nor_spimem_write_data(struct spi_nor *nor, loff_t to,
+ size_t len, const u8 *buf)
+{
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 1),
+ SPI_MEM_OP_ADDR(nor->addr_width, to, 1),
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_DATA_OUT(len, buf, 1));
+ ssize_t nbytes;
+ int error;
+
+ op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto);
+ op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto);
+ op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto);
+
+ if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second)
+ op.addr.nbytes = 0;
+
+ if (spi_nor_spimem_bounce(nor, &op))
+ memcpy(nor->bouncebuf, buf, op.data.nbytes);
+
+ if (nor->dirmap.wdesc) {
+ nbytes = spi_mem_dirmap_write(nor->dirmap.wdesc, op.addr.val,
+ op.data.nbytes, op.data.buf.out);
+ } else {
+ error = spi_nor_spimem_exec_op(nor, &op);
+ if (error)
+ return error;
+ nbytes = op.data.nbytes;
+ }
+
+ return nbytes;
+}
+
+/**
+ * spi_nor_write_data() - write data to flash memory
+ * @nor: pointer to 'struct spi_nor'
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @buf: pointer to src buffer
+ *
+ * Return: number of bytes written successfully, -errno otherwise
+ */
+ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len,
+ const u8 *buf)
+{
+ if (nor->spimem)
+ return spi_nor_spimem_write_data(nor, to, len, buf);
+
+ return nor->controller_ops->write(nor, to, len, buf);
+}
+
+/**
+ * spi_nor_write_enable() - Set write enable latch with Write Enable command.
+ * @nor: pointer to 'struct spi_nor'.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_write_enable(struct spi_nor *nor)
+{
+ int ret;
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREN, 1),
+ SPI_MEM_OP_NO_ADDR,
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_NO_DATA);
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WREN,
+ NULL, 0);
+ }
+
+ if (ret)
+ dev_dbg(nor->dev, "error %d on Write Enable\n", ret);
+
+ return ret;
+}
+
+/**
+ * spi_nor_write_disable() - Send Write Disable instruction to the chip.
+ * @nor: pointer to 'struct spi_nor'.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_write_disable(struct spi_nor *nor)
+{
+ int ret;
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRDI, 1),
+ SPI_MEM_OP_NO_ADDR,
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_NO_DATA);
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WRDI,
+ NULL, 0);
+ }
+
+ if (ret)
+ dev_dbg(nor->dev, "error %d on Write Disable\n", ret);
+
+ return ret;
+}
+
+/**
+ * spi_nor_read_sr() - Read the Status Register.
+ * @nor: pointer to 'struct spi_nor'.
+ * @sr: pointer to a DMA-able buffer where the value of the
+ * Status Register will be written.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_read_sr(struct spi_nor *nor, u8 *sr)
+{
+ int ret;
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR, 1),
+ SPI_MEM_OP_NO_ADDR,
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_DATA_IN(1, sr, 1));
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDSR,
+ sr, 1);
+ }
+
+ if (ret)
+ dev_dbg(nor->dev, "error %d reading SR\n", ret);
+
+ return ret;
+}
+
+/**
+ * spi_nor_read_fsr() - Read the Flag Status Register.
+ * @nor: pointer to 'struct spi_nor'
+ * @fsr: pointer to a DMA-able buffer where the value of the
+ * Flag Status Register will be written.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_read_fsr(struct spi_nor *nor, u8 *fsr)
+{
+ int ret;
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDFSR, 1),
+ SPI_MEM_OP_NO_ADDR,
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_DATA_IN(1, fsr, 1));
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDFSR,
+ fsr, 1);
+ }
+
+ if (ret)
+ dev_dbg(nor->dev, "error %d reading FSR\n", ret);
+
+ return ret;
+}
+
+/**
+ * spi_nor_read_cr() - Read the Configuration Register using the
+ * SPINOR_OP_RDCR (35h) command.
+ * @nor: pointer to 'struct spi_nor'
+ * @cr: pointer to a DMA-able buffer where the value of the
+ * Configuration Register will be written.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_read_cr(struct spi_nor *nor, u8 *cr)
+{
+ int ret;
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDCR, 1),
+ SPI_MEM_OP_NO_ADDR,
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_DATA_IN(1, cr, 1));
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDCR, cr, 1);
+ }
+
+ if (ret)
+ dev_dbg(nor->dev, "error %d reading CR\n", ret);
+
+ return ret;
+}
+
+/**
+ * spi_nor_set_4byte_addr_mode() - Enter/Exit 4-byte address mode.
+ * @nor: pointer to 'struct spi_nor'.
+ * @enable: true to enter the 4-byte address mode, false to exit the 4-byte
+ * address mode.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
+{
+ int ret;
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(enable ?
+ SPINOR_OP_EN4B :
+ SPINOR_OP_EX4B,
+ 1),
+ SPI_MEM_OP_NO_ADDR,
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_NO_DATA);
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ ret = nor->controller_ops->write_reg(nor,
+ enable ? SPINOR_OP_EN4B :
+ SPINOR_OP_EX4B,
+ NULL, 0);
+ }
+
+ if (ret)
+ dev_dbg(nor->dev, "error %d setting 4-byte mode\n", ret);
+
+ return ret;
+}
+
+/**
+ * spansion_set_4byte_addr_mode() - Set 4-byte address mode for Spansion
+ * flashes.
+ * @nor: pointer to 'struct spi_nor'.
+ * @enable: true to enter the 4-byte address mode, false to exit the 4-byte
+ * address mode.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spansion_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
+{
+ int ret;
+
+ nor->bouncebuf[0] = enable << 7;
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_BRWR, 1),
+ SPI_MEM_OP_NO_ADDR,
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1));
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ ret = nor->controller_ops->write_reg(nor, SPINOR_OP_BRWR,
+ nor->bouncebuf, 1);
+ }
+
+ if (ret)
+ dev_dbg(nor->dev, "error %d setting 4-byte mode\n", ret);
+
+ return ret;
+}
+
+/**
+ * spi_nor_write_ear() - Write Extended Address Register.
+ * @nor: pointer to 'struct spi_nor'.
+ * @ear: value to write to the Extended Address Register.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_write_ear(struct spi_nor *nor, u8 ear)
+{
+ int ret;
+
+ nor->bouncebuf[0] = ear;
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREAR, 1),
+ SPI_MEM_OP_NO_ADDR,
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1));
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WREAR,
+ nor->bouncebuf, 1);
+ }
+
+ if (ret)
+ dev_dbg(nor->dev, "error %d writing EAR\n", ret);
+
+ return ret;
+}
+
+/**
+ * spi_nor_xread_sr() - Read the Status Register on S3AN flashes.
+ * @nor: pointer to 'struct spi_nor'.
+ * @sr: pointer to a DMA-able buffer where the value of the
+ * Status Register will be written.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr)
+{
+ int ret;
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_XRDSR, 1),
+ SPI_MEM_OP_NO_ADDR,
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_DATA_IN(1, sr, 1));
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ ret = nor->controller_ops->read_reg(nor, SPINOR_OP_XRDSR,
+ sr, 1);
+ }
+
+ if (ret)
+ dev_dbg(nor->dev, "error %d reading XRDSR\n", ret);
+
+ return ret;
+}
+
+/**
+ * spi_nor_xsr_ready() - Query the Status Register of the S3AN flash to see if
+ * the flash is ready for new commands.
+ * @nor: pointer to 'struct spi_nor'.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_xsr_ready(struct spi_nor *nor)
+{
+ int ret;
+
+ ret = spi_nor_xread_sr(nor, nor->bouncebuf);
+ if (ret)
+ return ret;
+
+ return !!(nor->bouncebuf[0] & XSR_RDY);
+}
+
+/**
+ * spi_nor_clear_sr() - Clear the Status Register.
+ * @nor: pointer to 'struct spi_nor'.
+ */
+static void spi_nor_clear_sr(struct spi_nor *nor)
+{
+ int ret;
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLSR, 1),
+ SPI_MEM_OP_NO_ADDR,
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_NO_DATA);
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ ret = nor->controller_ops->write_reg(nor, SPINOR_OP_CLSR,
+ NULL, 0);
+ }
+
+ if (ret)
+ dev_dbg(nor->dev, "error %d clearing SR\n", ret);
+}
+
+/**
+ * spi_nor_sr_ready() - Query the Status Register to see if the flash is ready
+ * for new commands.
+ * @nor: pointer to 'struct spi_nor'.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_sr_ready(struct spi_nor *nor)
+{
+ int ret = spi_nor_read_sr(nor, nor->bouncebuf);
+
+ if (ret)
+ return ret;
+
+ if (nor->flags & SNOR_F_USE_CLSR &&
+ nor->bouncebuf[0] & (SR_E_ERR | SR_P_ERR)) {
+ if (nor->bouncebuf[0] & SR_E_ERR)
+ dev_err(nor->dev, "Erase Error occurred\n");
+ else
+ dev_err(nor->dev, "Programming Error occurred\n");
+
+ spi_nor_clear_sr(nor);
+
+ /*
+ * WEL bit remains set to one when an erase or page program
+ * error occurs. Issue a Write Disable command to protect
+ * against inadvertent writes that can possibly corrupt the
+ * contents of the memory.
+ */
+ ret = spi_nor_write_disable(nor);
+ if (ret)
+ return ret;
+
+ return -EIO;
+ }
+
+ return !(nor->bouncebuf[0] & SR_WIP);
+}
+
+/**
+ * spi_nor_clear_fsr() - Clear the Flag Status Register.
+ * @nor: pointer to 'struct spi_nor'.
+ */
+static void spi_nor_clear_fsr(struct spi_nor *nor)
+{
+ int ret;
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLFSR, 1),
+ SPI_MEM_OP_NO_ADDR,
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_NO_DATA);
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ ret = nor->controller_ops->write_reg(nor, SPINOR_OP_CLFSR,
+ NULL, 0);
+ }
+
+ if (ret)
+ dev_dbg(nor->dev, "error %d clearing FSR\n", ret);
+}
+
+/**
+ * spi_nor_fsr_ready() - Query the Flag Status Register to see if the flash is
+ * ready for new commands.
+ * @nor: pointer to 'struct spi_nor'.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_fsr_ready(struct spi_nor *nor)
+{
+ int ret = spi_nor_read_fsr(nor, nor->bouncebuf);
+
+ if (ret)
+ return ret;
+
+ if (nor->bouncebuf[0] & (FSR_E_ERR | FSR_P_ERR)) {
+ if (nor->bouncebuf[0] & FSR_E_ERR)
+ dev_err(nor->dev, "Erase operation failed.\n");
+ else
+ dev_err(nor->dev, "Program operation failed.\n");
+
+ if (nor->bouncebuf[0] & FSR_PT_ERR)
+ dev_err(nor->dev,
+ "Attempted to modify a protected sector.\n");
+
+ spi_nor_clear_fsr(nor);
+
+ /*
+ * WEL bit remains set to one when an erase or page program
+ * error occurs. Issue a Write Disable command to protect
+ * against inadvertent writes that can possibly corrupt the
+ * contents of the memory.
+ */
+ ret = spi_nor_write_disable(nor);
+ if (ret)
+ return ret;
+
+ return -EIO;
+ }
+
+ return nor->bouncebuf[0] & FSR_READY;
+}
+
+/**
+ * spi_nor_ready() - Query the flash to see if it is ready for new commands.
+ * @nor: pointer to 'struct spi_nor'.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_ready(struct spi_nor *nor)
+{
+ int sr, fsr;
+
+ if (nor->flags & SNOR_F_READY_XSR_RDY)
+ sr = spi_nor_xsr_ready(nor);
+ else
+ sr = spi_nor_sr_ready(nor);
+ if (sr < 0)
+ return sr;
+ fsr = nor->flags & SNOR_F_USE_FSR ? spi_nor_fsr_ready(nor) : 1;
+ if (fsr < 0)
+ return fsr;
+ return sr && fsr;
+}
+
+/**
+ * spi_nor_wait_till_ready_with_timeout() - Service routine to read the
+ * Status Register until ready, or timeout occurs.
+ * @nor: pointer to "struct spi_nor".
+ * @timeout_jiffies: jiffies to wait until timeout.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_wait_till_ready_with_timeout(struct spi_nor *nor,
+ unsigned long timeout_jiffies)
+{
+ unsigned long deadline;
+ int timeout = 0, ret;
+
+ deadline = jiffies + timeout_jiffies;
+
+ while (!timeout) {
+ if (time_after_eq(jiffies, deadline))
+ timeout = 1;
+
+ ret = spi_nor_ready(nor);
+ if (ret < 0)
+ return ret;
+ if (ret)
+ return 0;
+
+ cond_resched();
+ }
+
+ dev_dbg(nor->dev, "flash operation timed out\n");
+
+ return -ETIMEDOUT;
+}
+
+/**
+ * spi_nor_wait_till_ready() - Wait for a predefined amount of time for the
+ * flash to be ready, or timeout occurs.
+ * @nor: pointer to "struct spi_nor".
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_wait_till_ready(struct spi_nor *nor)
+{
+ return spi_nor_wait_till_ready_with_timeout(nor,
+ DEFAULT_READY_WAIT_JIFFIES);
+}
+
+/**
+ * spi_nor_write_sr() - Write the Status Register.
+ * @nor: pointer to 'struct spi_nor'.
+ * @sr: pointer to DMA-able buffer to write to the Status Register.
+ * @len: number of bytes to write to the Status Register.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_write_sr(struct spi_nor *nor, const u8 *sr, size_t len)
+{
+ int ret;
+
+ ret = spi_nor_write_enable(nor);
+ if (ret)
+ return ret;
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 1),
+ SPI_MEM_OP_NO_ADDR,
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_DATA_OUT(len, sr, 1));
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WRSR,
+ sr, len);
+ }
+
+ if (ret) {
+ dev_dbg(nor->dev, "error %d writing SR\n", ret);
+ return ret;
+ }
+
+ return spi_nor_wait_till_ready(nor);
+}
+
+/**
+ * spi_nor_write_sr1_and_check() - Write one byte to the Status Register 1 and
+ * ensure that the byte written match the received value.
+ * @nor: pointer to a 'struct spi_nor'.
+ * @sr1: byte value to be written to the Status Register.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_write_sr1_and_check(struct spi_nor *nor, u8 sr1)
+{
+ int ret;
+
+ nor->bouncebuf[0] = sr1;
+
+ ret = spi_nor_write_sr(nor, nor->bouncebuf, 1);
+ if (ret)
+ return ret;
+
+ ret = spi_nor_read_sr(nor, nor->bouncebuf);
+ if (ret)
+ return ret;
+
+ if (nor->bouncebuf[0] != sr1) {
+ dev_dbg(nor->dev, "SR1: read back test failed\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * spi_nor_write_16bit_sr_and_check() - Write the Status Register 1 and the
+ * Status Register 2 in one shot. Ensure that the byte written in the Status
+ * Register 1 match the received value, and that the 16-bit Write did not
+ * affect what was already in the Status Register 2.
+ * @nor: pointer to a 'struct spi_nor'.
+ * @sr1: byte value to be written to the Status Register 1.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_write_16bit_sr_and_check(struct spi_nor *nor, u8 sr1)
+{
+ int ret;
+ u8 *sr_cr = nor->bouncebuf;
+ u8 cr_written;
+
+ /* Make sure we don't overwrite the contents of Status Register 2. */
+ if (!(nor->flags & SNOR_F_NO_READ_CR)) {
+ ret = spi_nor_read_cr(nor, &sr_cr[1]);
+ if (ret)
+ return ret;
+ } else if (nor->params->quad_enable) {
+ /*
+ * If the Status Register 2 Read command (35h) is not
+ * supported, we should at least be sure we don't
+ * change the value of the SR2 Quad Enable bit.
+ *
+ * We can safely assume that when the Quad Enable method is
+ * set, the value of the QE bit is one, as a consequence of the
+ * nor->params->quad_enable() call.
+ *
+ * We can safely assume that the Quad Enable bit is present in
+ * the Status Register 2 at BIT(1). According to the JESD216
+ * revB standard, BFPT DWORDS[15], bits 22:20, the 16-bit
+ * Write Status (01h) command is available just for the cases
+ * in which the QE bit is described in SR2 at BIT(1).
+ */
+ sr_cr[1] = SR2_QUAD_EN_BIT1;
+ } else {
+ sr_cr[1] = 0;
+ }
+
+ sr_cr[0] = sr1;
+
+ ret = spi_nor_write_sr(nor, sr_cr, 2);
+ if (ret)
+ return ret;
+
+ if (nor->flags & SNOR_F_NO_READ_CR)
+ return 0;
+
+ cr_written = sr_cr[1];
+
+ ret = spi_nor_read_cr(nor, &sr_cr[1]);
+ if (ret)
+ return ret;
+
+ if (cr_written != sr_cr[1]) {
+ dev_dbg(nor->dev, "CR: read back test failed\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * spi_nor_write_16bit_cr_and_check() - Write the Status Register 1 and the
+ * Configuration Register in one shot. Ensure that the byte written in the
+ * Configuration Register match the received value, and that the 16-bit Write
+ * did not affect what was already in the Status Register 1.
+ * @nor: pointer to a 'struct spi_nor'.
+ * @cr: byte value to be written to the Configuration Register.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_write_16bit_cr_and_check(struct spi_nor *nor, u8 cr)
+{
+ int ret;
+ u8 *sr_cr = nor->bouncebuf;
+ u8 sr_written;
+
+ /* Keep the current value of the Status Register 1. */
+ ret = spi_nor_read_sr(nor, sr_cr);
+ if (ret)
+ return ret;
+
+ sr_cr[1] = cr;
+
+ ret = spi_nor_write_sr(nor, sr_cr, 2);
+ if (ret)
+ return ret;
+
+ sr_written = sr_cr[0];
+
+ ret = spi_nor_read_sr(nor, sr_cr);
+ if (ret)
+ return ret;
+
+ if (sr_written != sr_cr[0]) {
+ dev_dbg(nor->dev, "SR: Read back test failed\n");
+ return -EIO;
+ }
+
+ if (nor->flags & SNOR_F_NO_READ_CR)
+ return 0;
+
+ ret = spi_nor_read_cr(nor, &sr_cr[1]);
+ if (ret)
+ return ret;
+
+ if (cr != sr_cr[1]) {
+ dev_dbg(nor->dev, "CR: read back test failed\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * spi_nor_write_sr_and_check() - Write the Status Register 1 and ensure that
+ * the byte written match the received value without affecting other bits in the
+ * Status Register 1 and 2.
+ * @nor: pointer to a 'struct spi_nor'.
+ * @sr1: byte value to be written to the Status Register.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_write_sr_and_check(struct spi_nor *nor, u8 sr1)
+{
+ if (nor->flags & SNOR_F_HAS_16BIT_SR)
+ return spi_nor_write_16bit_sr_and_check(nor, sr1);
+
+ return spi_nor_write_sr1_and_check(nor, sr1);
+}
+
+/**
+ * spi_nor_write_sr2() - Write the Status Register 2 using the
+ * SPINOR_OP_WRSR2 (3eh) command.
+ * @nor: pointer to 'struct spi_nor'.
+ * @sr2: pointer to DMA-able buffer to write to the Status Register 2.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_write_sr2(struct spi_nor *nor, const u8 *sr2)
+{
+ int ret;
+
+ ret = spi_nor_write_enable(nor);
+ if (ret)
+ return ret;
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR2, 1),
+ SPI_MEM_OP_NO_ADDR,
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_DATA_OUT(1, sr2, 1));
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WRSR2,
+ sr2, 1);
+ }
+
+ if (ret) {
+ dev_dbg(nor->dev, "error %d writing SR2\n", ret);
+ return ret;
+ }
+
+ return spi_nor_wait_till_ready(nor);
+}
+
+/**
+ * spi_nor_read_sr2() - Read the Status Register 2 using the
+ * SPINOR_OP_RDSR2 (3fh) command.
+ * @nor: pointer to 'struct spi_nor'.
+ * @sr2: pointer to DMA-able buffer where the value of the
+ * Status Register 2 will be written.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_read_sr2(struct spi_nor *nor, u8 *sr2)
+{
+ int ret;
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR2, 1),
+ SPI_MEM_OP_NO_ADDR,
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_DATA_IN(1, sr2, 1));
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDSR2,
+ sr2, 1);
+ }
+
+ if (ret)
+ dev_dbg(nor->dev, "error %d reading SR2\n", ret);
+
+ return ret;
+}
+
+/**
+ * spi_nor_erase_chip() - Erase the entire flash memory.
+ * @nor: pointer to 'struct spi_nor'.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_erase_chip(struct spi_nor *nor)
+{
+ int ret;
+
+ dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd.size >> 10));
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CHIP_ERASE, 1),
+ SPI_MEM_OP_NO_ADDR,
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_NO_DATA);
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ ret = nor->controller_ops->write_reg(nor, SPINOR_OP_CHIP_ERASE,
+ NULL, 0);
+ }
+
+ if (ret)
+ dev_dbg(nor->dev, "error %d erasing chip\n", ret);
+
+ return ret;
+}
+
+static u8 spi_nor_convert_opcode(u8 opcode, const u8 table[][2], size_t size)
+{
+ size_t i;
+
+ for (i = 0; i < size; i++)
+ if (table[i][0] == opcode)
+ return table[i][1];
+
+ /* No conversion found, keep input op code. */
+ return opcode;
+}
+
+u8 spi_nor_convert_3to4_read(u8 opcode)
+{
+ static const u8 spi_nor_3to4_read[][2] = {
+ { SPINOR_OP_READ, SPINOR_OP_READ_4B },
+ { SPINOR_OP_READ_FAST, SPINOR_OP_READ_FAST_4B },
+ { SPINOR_OP_READ_1_1_2, SPINOR_OP_READ_1_1_2_4B },
+ { SPINOR_OP_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B },
+ { SPINOR_OP_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B },
+ { SPINOR_OP_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B },
+ { SPINOR_OP_READ_1_1_8, SPINOR_OP_READ_1_1_8_4B },
+ { SPINOR_OP_READ_1_8_8, SPINOR_OP_READ_1_8_8_4B },
+
+ { SPINOR_OP_READ_1_1_1_DTR, SPINOR_OP_READ_1_1_1_DTR_4B },
+ { SPINOR_OP_READ_1_2_2_DTR, SPINOR_OP_READ_1_2_2_DTR_4B },
+ { SPINOR_OP_READ_1_4_4_DTR, SPINOR_OP_READ_1_4_4_DTR_4B },
+ };
+
+ return spi_nor_convert_opcode(opcode, spi_nor_3to4_read,
+ ARRAY_SIZE(spi_nor_3to4_read));
+}
+
+static u8 spi_nor_convert_3to4_program(u8 opcode)
+{
+ static const u8 spi_nor_3to4_program[][2] = {
+ { SPINOR_OP_PP, SPINOR_OP_PP_4B },
+ { SPINOR_OP_PP_1_1_4, SPINOR_OP_PP_1_1_4_4B },
+ { SPINOR_OP_PP_1_4_4, SPINOR_OP_PP_1_4_4_4B },
+ { SPINOR_OP_PP_1_1_8, SPINOR_OP_PP_1_1_8_4B },
+ { SPINOR_OP_PP_1_8_8, SPINOR_OP_PP_1_8_8_4B },
+ };
+
+ return spi_nor_convert_opcode(opcode, spi_nor_3to4_program,
+ ARRAY_SIZE(spi_nor_3to4_program));
+}
+
+static u8 spi_nor_convert_3to4_erase(u8 opcode)
+{
+ static const u8 spi_nor_3to4_erase[][2] = {
+ { SPINOR_OP_BE_4K, SPINOR_OP_BE_4K_4B },
+ { SPINOR_OP_BE_32K, SPINOR_OP_BE_32K_4B },
+ { SPINOR_OP_SE, SPINOR_OP_SE_4B },
+ };
+
+ return spi_nor_convert_opcode(opcode, spi_nor_3to4_erase,
+ ARRAY_SIZE(spi_nor_3to4_erase));
+}
+
+static bool spi_nor_has_uniform_erase(const struct spi_nor *nor)
+{
+ return !!nor->params->erase_map.uniform_erase_type;
+}
+
+static void spi_nor_set_4byte_opcodes(struct spi_nor *nor)
+{
+ nor->read_opcode = spi_nor_convert_3to4_read(nor->read_opcode);
+ nor->program_opcode = spi_nor_convert_3to4_program(nor->program_opcode);
+ nor->erase_opcode = spi_nor_convert_3to4_erase(nor->erase_opcode);
+
+ if (!spi_nor_has_uniform_erase(nor)) {
+ struct spi_nor_erase_map *map = &nor->params->erase_map;
+ struct spi_nor_erase_type *erase;
+ int i;
+
+ for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
+ erase = &map->erase_type[i];
+ erase->opcode =
+ spi_nor_convert_3to4_erase(erase->opcode);
+ }
+ }
+}
+
+int spi_nor_lock_and_prep(struct spi_nor *nor)
+{
+ int ret = 0;
+
+ mutex_lock(&nor->lock);
+
+ if (nor->controller_ops && nor->controller_ops->prepare) {
+ ret = nor->controller_ops->prepare(nor);
+ if (ret) {
+ mutex_unlock(&nor->lock);
+ return ret;
+ }
+ }
+ return ret;
+}
+
+void spi_nor_unlock_and_unprep(struct spi_nor *nor)
+{
+ if (nor->controller_ops && nor->controller_ops->unprepare)
+ nor->controller_ops->unprepare(nor);
+ mutex_unlock(&nor->lock);
+}
+
+static u32 spi_nor_convert_addr(struct spi_nor *nor, loff_t addr)
+{
+ if (!nor->params->convert_addr)
+ return addr;
+
+ return nor->params->convert_addr(nor, addr);
+}
+
+/*
+ * Initiate the erasure of a single sector
+ */
+static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
+{
+ int i;
+
+ addr = spi_nor_convert_addr(nor, addr);
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(nor->erase_opcode, 1),
+ SPI_MEM_OP_ADDR(nor->addr_width, addr, 1),
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_NO_DATA);
+
+ return spi_mem_exec_op(nor->spimem, &op);
+ } else if (nor->controller_ops->erase) {
+ return nor->controller_ops->erase(nor, addr);
+ }
+
+ /*
+ * Default implementation, if driver doesn't have a specialized HW
+ * control
+ */
+ for (i = nor->addr_width - 1; i >= 0; i--) {
+ nor->bouncebuf[i] = addr & 0xff;
+ addr >>= 8;
+ }
+
+ return nor->controller_ops->write_reg(nor, nor->erase_opcode,
+ nor->bouncebuf, nor->addr_width);
+}
+
+/**
+ * spi_nor_div_by_erase_size() - calculate remainder and update new dividend
+ * @erase: pointer to a structure that describes a SPI NOR erase type
+ * @dividend: dividend value
+ * @remainder: pointer to u32 remainder (will be updated)
+ *
+ * Return: the result of the division
+ */
+static u64 spi_nor_div_by_erase_size(const struct spi_nor_erase_type *erase,
+ u64 dividend, u32 *remainder)
+{
+ /* JEDEC JESD216B Standard imposes erase sizes to be power of 2. */
+ *remainder = (u32)dividend & erase->size_mask;
+ return dividend >> erase->size_shift;
+}
+
+/**
+ * spi_nor_find_best_erase_type() - find the best erase type for the given
+ * offset in the serial flash memory and the
+ * number of bytes to erase. The region in
+ * which the address fits is expected to be
+ * provided.
+ * @map: the erase map of the SPI NOR
+ * @region: pointer to a structure that describes a SPI NOR erase region
+ * @addr: offset in the serial flash memory
+ * @len: number of bytes to erase
+ *
+ * Return: a pointer to the best fitted erase type, NULL otherwise.
+ */
+static const struct spi_nor_erase_type *
+spi_nor_find_best_erase_type(const struct spi_nor_erase_map *map,
+ const struct spi_nor_erase_region *region,
+ u64 addr, u32 len)
+{
+ const struct spi_nor_erase_type *erase;
+ u32 rem;
+ int i;
+ u8 erase_mask = region->offset & SNOR_ERASE_TYPE_MASK;
+
+ /*
+ * Erase types are ordered by size, with the smallest erase type at
+ * index 0.
+ */
+ for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
+ /* Does the erase region support the tested erase type? */
+ if (!(erase_mask & BIT(i)))
+ continue;
+
+ erase = &map->erase_type[i];
+
+ /* Don't erase more than what the user has asked for. */
+ if (erase->size > len)
+ continue;
+
+ /* Alignment is not mandatory for overlaid regions */
+ if (region->offset & SNOR_OVERLAID_REGION)
+ return erase;
+
+ spi_nor_div_by_erase_size(erase, addr, &rem);
+ if (rem)
+ continue;
+ else
+ return erase;
+ }
+
+ return NULL;
+}
+
+static u64 spi_nor_region_is_last(const struct spi_nor_erase_region *region)
+{
+ return region->offset & SNOR_LAST_REGION;
+}
+
+static u64 spi_nor_region_end(const struct spi_nor_erase_region *region)
+{
+ return (region->offset & ~SNOR_ERASE_FLAGS_MASK) + region->size;
+}
+
+/**
+ * spi_nor_region_next() - get the next spi nor region
+ * @region: pointer to a structure that describes a SPI NOR erase region
+ *
+ * Return: the next spi nor region or NULL if last region.
+ */
+struct spi_nor_erase_region *
+spi_nor_region_next(struct spi_nor_erase_region *region)
+{
+ if (spi_nor_region_is_last(region))
+ return NULL;
+ region++;
+ return region;
+}
+
+/**
+ * spi_nor_find_erase_region() - find the region of the serial flash memory in
+ * which the offset fits
+ * @map: the erase map of the SPI NOR
+ * @addr: offset in the serial flash memory
+ *
+ * Return: a pointer to the spi_nor_erase_region struct, ERR_PTR(-errno)
+ * otherwise.
+ */
+static struct spi_nor_erase_region *
+spi_nor_find_erase_region(const struct spi_nor_erase_map *map, u64 addr)
+{
+ struct spi_nor_erase_region *region = map->regions;
+ u64 region_start = region->offset & ~SNOR_ERASE_FLAGS_MASK;
+ u64 region_end = region_start + region->size;
+
+ while (addr < region_start || addr >= region_end) {
+ region = spi_nor_region_next(region);
+ if (!region)
+ return ERR_PTR(-EINVAL);
+
+ region_start = region->offset & ~SNOR_ERASE_FLAGS_MASK;
+ region_end = region_start + region->size;
+ }
+
+ return region;
+}
+
+/**
+ * spi_nor_init_erase_cmd() - initialize an erase command
+ * @region: pointer to a structure that describes a SPI NOR erase region
+ * @erase: pointer to a structure that describes a SPI NOR erase type
+ *
+ * Return: the pointer to the allocated erase command, ERR_PTR(-errno)
+ * otherwise.
+ */
+static struct spi_nor_erase_command *
+spi_nor_init_erase_cmd(const struct spi_nor_erase_region *region,
+ const struct spi_nor_erase_type *erase)
+{
+ struct spi_nor_erase_command *cmd;
+
+ cmd = kmalloc(sizeof(*cmd), GFP_KERNEL);
+ if (!cmd)
+ return ERR_PTR(-ENOMEM);
+
+ INIT_LIST_HEAD(&cmd->list);
+ cmd->opcode = erase->opcode;
+ cmd->count = 1;
+
+ if (region->offset & SNOR_OVERLAID_REGION)
+ cmd->size = region->size;
+ else
+ cmd->size = erase->size;
+
+ return cmd;
+}
+
+/**
+ * spi_nor_destroy_erase_cmd_list() - destroy erase command list
+ * @erase_list: list of erase commands
+ */
+static void spi_nor_destroy_erase_cmd_list(struct list_head *erase_list)
+{
+ struct spi_nor_erase_command *cmd, *next;
+
+ list_for_each_entry_safe(cmd, next, erase_list, list) {
+ list_del(&cmd->list);
+ kfree(cmd);
+ }
+}
+
+/**
+ * spi_nor_init_erase_cmd_list() - initialize erase command list
+ * @nor: pointer to a 'struct spi_nor'
+ * @erase_list: list of erase commands to be executed once we validate that the
+ * erase can be performed
+ * @addr: offset in the serial flash memory
+ * @len: number of bytes to erase
+ *
+ * Builds the list of best fitted erase commands and verifies if the erase can
+ * be performed.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_init_erase_cmd_list(struct spi_nor *nor,
+ struct list_head *erase_list,
+ u64 addr, u32 len)
+{
+ const struct spi_nor_erase_map *map = &nor->params->erase_map;
+ const struct spi_nor_erase_type *erase, *prev_erase = NULL;
+ struct spi_nor_erase_region *region;
+ struct spi_nor_erase_command *cmd = NULL;
+ u64 region_end;
+ int ret = -EINVAL;
+
+ region = spi_nor_find_erase_region(map, addr);
+ if (IS_ERR(region))
+ return PTR_ERR(region);
+
+ region_end = spi_nor_region_end(region);
+
+ while (len) {
+ erase = spi_nor_find_best_erase_type(map, region, addr, len);
+ if (!erase)
+ goto destroy_erase_cmd_list;
+
+ if (prev_erase != erase ||
+ region->offset & SNOR_OVERLAID_REGION) {
+ cmd = spi_nor_init_erase_cmd(region, erase);
+ if (IS_ERR(cmd)) {
+ ret = PTR_ERR(cmd);
+ goto destroy_erase_cmd_list;
+ }
+
+ list_add_tail(&cmd->list, erase_list);
+ } else {
+ cmd->count++;
+ }
+
+ addr += cmd->size;
+ len -= cmd->size;
+
+ if (len && addr >= region_end) {
+ region = spi_nor_region_next(region);
+ if (!region)
+ goto destroy_erase_cmd_list;
+ region_end = spi_nor_region_end(region);
+ }
+
+ prev_erase = erase;
+ }
+
+ return 0;
+
+destroy_erase_cmd_list:
+ spi_nor_destroy_erase_cmd_list(erase_list);
+ return ret;
+}
+
+/**
+ * spi_nor_erase_multi_sectors() - perform a non-uniform erase
+ * @nor: pointer to a 'struct spi_nor'
+ * @addr: offset in the serial flash memory
+ * @len: number of bytes to erase
+ *
+ * Build a list of best fitted erase commands and execute it once we validate
+ * that the erase can be performed.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_erase_multi_sectors(struct spi_nor *nor, u64 addr, u32 len)
+{
+ LIST_HEAD(erase_list);
+ struct spi_nor_erase_command *cmd, *next;
+ int ret;
+
+ ret = spi_nor_init_erase_cmd_list(nor, &erase_list, addr, len);
+ if (ret)
+ return ret;
+
+ list_for_each_entry_safe(cmd, next, &erase_list, list) {
+ nor->erase_opcode = cmd->opcode;
+ while (cmd->count) {
+ ret = spi_nor_write_enable(nor);
+ if (ret)
+ goto destroy_erase_cmd_list;
+
+ ret = spi_nor_erase_sector(nor, addr);
+ if (ret)
+ goto destroy_erase_cmd_list;
+
+ addr += cmd->size;
+ cmd->count--;
+
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ goto destroy_erase_cmd_list;
+ }
+ list_del(&cmd->list);
+ kfree(cmd);
+ }
+
+ return 0;
+
+destroy_erase_cmd_list:
+ spi_nor_destroy_erase_cmd_list(&erase_list);
+ return ret;
+}
+
+/*
+ * Erase an address range on the nor chip. The address range may extend
+ * one or more erase sectors. Return an error is there is a problem erasing.
+ */
+static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+ struct spi_nor *nor = mtd_to_spi_nor(mtd);
+ u32 addr, len;
+ uint32_t rem;
+ int ret;
+
+ dev_dbg(nor->dev, "at 0x%llx, len %lld\n", (long long)instr->addr,
+ (long long)instr->len);
+
+ if (spi_nor_has_uniform_erase(nor)) {
+ div_u64_rem(instr->len, mtd->erasesize, &rem);
+ if (rem)
+ return -EINVAL;
+ }
+
+ addr = instr->addr;
+ len = instr->len;
+
+ ret = spi_nor_lock_and_prep(nor);
+ if (ret)
+ return ret;
+
+ /* whole-chip erase? */
+ if (len == mtd->size && !(nor->flags & SNOR_F_NO_OP_CHIP_ERASE)) {
+ unsigned long timeout;
+
+ ret = spi_nor_write_enable(nor);
+ if (ret)
+ goto erase_err;
+
+ ret = spi_nor_erase_chip(nor);
+ if (ret)
+ goto erase_err;
+
+ /*
+ * Scale the timeout linearly with the size of the flash, with
+ * a minimum calibrated to an old 2MB flash. We could try to
+ * pull these from CFI/SFDP, but these values should be good
+ * enough for now.
+ */
+ timeout = max(CHIP_ERASE_2MB_READY_WAIT_JIFFIES,
+ CHIP_ERASE_2MB_READY_WAIT_JIFFIES *
+ (unsigned long)(mtd->size / SZ_2M));
+ ret = spi_nor_wait_till_ready_with_timeout(nor, timeout);
+ if (ret)
+ goto erase_err;
+
+ /* REVISIT in some cases we could speed up erasing large regions
+ * by using SPINOR_OP_SE instead of SPINOR_OP_BE_4K. We may have set up
+ * to use "small sector erase", but that's not always optimal.
+ */
+
+ /* "sector"-at-a-time erase */
+ } else if (spi_nor_has_uniform_erase(nor)) {
+ while (len) {
+ ret = spi_nor_write_enable(nor);
+ if (ret)
+ goto erase_err;
+
+ ret = spi_nor_erase_sector(nor, addr);
+ if (ret)
+ goto erase_err;
+
+ addr += mtd->erasesize;
+ len -= mtd->erasesize;
+
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ goto erase_err;
+ }
+
+ /* erase multiple sectors */
+ } else {
+ ret = spi_nor_erase_multi_sectors(nor, addr, len);
+ if (ret)
+ goto erase_err;
+ }
+
+ ret = spi_nor_write_disable(nor);
+
+erase_err:
+ spi_nor_unlock_and_unprep(nor);
+
+ return ret;
+}
+
+static u8 spi_nor_get_sr_bp_mask(struct spi_nor *nor)
+{
+ u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
+
+ if (nor->flags & SNOR_F_HAS_SR_BP3_BIT6)
+ return mask | SR_BP3_BIT6;
+
+ if (nor->flags & SNOR_F_HAS_4BIT_BP)
+ return mask | SR_BP3;
+
+ return mask;
+}
+
+static u8 spi_nor_get_sr_tb_mask(struct spi_nor *nor)
+{
+ if (nor->flags & SNOR_F_HAS_SR_TB_BIT6)
+ return SR_TB_BIT6;
+ else
+ return SR_TB_BIT5;
+}
+
+static u64 spi_nor_get_min_prot_length_sr(struct spi_nor *nor)
+{
+ unsigned int bp_slots, bp_slots_needed;
+ u8 mask = spi_nor_get_sr_bp_mask(nor);
+
+ /* Reserved one for "protect none" and one for "protect all". */
+ bp_slots = (1 << hweight8(mask)) - 2;
+ bp_slots_needed = ilog2(nor->info->n_sectors);
+
+ if (bp_slots_needed > bp_slots)
+ return nor->info->sector_size <<
+ (bp_slots_needed - bp_slots);
+ else
+ return nor->info->sector_size;
+}
+
+static void spi_nor_get_locked_range_sr(struct spi_nor *nor, u8 sr, loff_t *ofs,
+ uint64_t *len)
+{
+ struct mtd_info *mtd = &nor->mtd;
+ u64 min_prot_len;
+ u8 mask = spi_nor_get_sr_bp_mask(nor);
+ u8 tb_mask = spi_nor_get_sr_tb_mask(nor);
+ u8 bp, val = sr & mask;
+
+ if (nor->flags & SNOR_F_HAS_SR_BP3_BIT6 && val & SR_BP3_BIT6)
+ val = (val & ~SR_BP3_BIT6) | SR_BP3;
+
+ bp = val >> SR_BP_SHIFT;
+
+ if (!bp) {
+ /* No protection */
+ *ofs = 0;
+ *len = 0;
+ return;
+ }
+
+ min_prot_len = spi_nor_get_min_prot_length_sr(nor);
+ *len = min_prot_len << (bp - 1);
+
+ if (*len > mtd->size)
+ *len = mtd->size;
+
+ if (nor->flags & SNOR_F_HAS_SR_TB && sr & tb_mask)
+ *ofs = 0;
+ else
+ *ofs = mtd->size - *len;
+}
+
+/*
+ * Return 1 if the entire region is locked (if @locked is true) or unlocked (if
+ * @locked is false); 0 otherwise
+ */
+static int spi_nor_check_lock_status_sr(struct spi_nor *nor, loff_t ofs,
+ uint64_t len, u8 sr, bool locked)
+{
+ loff_t lock_offs;
+ uint64_t lock_len;
+
+ if (!len)
+ return 1;
+
+ spi_nor_get_locked_range_sr(nor, sr, &lock_offs, &lock_len);
+
+ if (locked)
+ /* Requested range is a sub-range of locked range */
+ return (ofs + len <= lock_offs + lock_len) && (ofs >= lock_offs);
+ else
+ /* Requested range does not overlap with locked range */
+ return (ofs >= lock_offs + lock_len) || (ofs + len <= lock_offs);
+}
+
+static int spi_nor_is_locked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
+ u8 sr)
+{
+ return spi_nor_check_lock_status_sr(nor, ofs, len, sr, true);
+}
+
+static int spi_nor_is_unlocked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
+ u8 sr)
+{
+ return spi_nor_check_lock_status_sr(nor, ofs, len, sr, false);
+}
+
+/*
+ * Lock a region of the flash. Compatible with ST Micro and similar flash.
+ * Supports the block protection bits BP{0,1,2}/BP{0,1,2,3} in the status
+ * register
+ * (SR). Does not support these features found in newer SR bitfields:
+ * - SEC: sector/block protect - only handle SEC=0 (block protect)
+ * - CMP: complement protect - only support CMP=0 (range is not complemented)
+ *
+ * Support for the following is provided conditionally for some flash:
+ * - TB: top/bottom protect
+ *
+ * Sample table portion for 8MB flash (Winbond w25q64fw):
+ *
+ * SEC | TB | BP2 | BP1 | BP0 | Prot Length | Protected Portion
+ * --------------------------------------------------------------------------
+ * X | X | 0 | 0 | 0 | NONE | NONE
+ * 0 | 0 | 0 | 0 | 1 | 128 KB | Upper 1/64
+ * 0 | 0 | 0 | 1 | 0 | 256 KB | Upper 1/32
+ * 0 | 0 | 0 | 1 | 1 | 512 KB | Upper 1/16
+ * 0 | 0 | 1 | 0 | 0 | 1 MB | Upper 1/8
+ * 0 | 0 | 1 | 0 | 1 | 2 MB | Upper 1/4
+ * 0 | 0 | 1 | 1 | 0 | 4 MB | Upper 1/2
+ * X | X | 1 | 1 | 1 | 8 MB | ALL
+ * ------|-------|-------|-------|-------|---------------|-------------------
+ * 0 | 1 | 0 | 0 | 1 | 128 KB | Lower 1/64
+ * 0 | 1 | 0 | 1 | 0 | 256 KB | Lower 1/32
+ * 0 | 1 | 0 | 1 | 1 | 512 KB | Lower 1/16
+ * 0 | 1 | 1 | 0 | 0 | 1 MB | Lower 1/8
+ * 0 | 1 | 1 | 0 | 1 | 2 MB | Lower 1/4
+ * 0 | 1 | 1 | 1 | 0 | 4 MB | Lower 1/2
+ *
+ * Returns negative on errors, 0 on success.
+ */
+static int spi_nor_sr_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+ struct mtd_info *mtd = &nor->mtd;
+ u64 min_prot_len;
+ int ret, status_old, status_new;
+ u8 mask = spi_nor_get_sr_bp_mask(nor);
+ u8 tb_mask = spi_nor_get_sr_tb_mask(nor);
+ u8 pow, val;
+ loff_t lock_len;
+ bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB;
+ bool use_top;
+
+ ret = spi_nor_read_sr(nor, nor->bouncebuf);
+ if (ret)
+ return ret;
+
+ status_old = nor->bouncebuf[0];
+
+ /* If nothing in our range is unlocked, we don't need to do anything */
+ if (spi_nor_is_locked_sr(nor, ofs, len, status_old))
+ return 0;
+
+ /* If anything below us is unlocked, we can't use 'bottom' protection */
+ if (!spi_nor_is_locked_sr(nor, 0, ofs, status_old))
+ can_be_bottom = false;
+
+ /* If anything above us is unlocked, we can't use 'top' protection */
+ if (!spi_nor_is_locked_sr(nor, ofs + len, mtd->size - (ofs + len),
+ status_old))
+ can_be_top = false;
+
+ if (!can_be_bottom && !can_be_top)
+ return -EINVAL;
+
+ /* Prefer top, if both are valid */
+ use_top = can_be_top;
+
+ /* lock_len: length of region that should end up locked */
+ if (use_top)
+ lock_len = mtd->size - ofs;
+ else
+ lock_len = ofs + len;
+
+ if (lock_len == mtd->size) {
+ val = mask;
+ } else {
+ min_prot_len = spi_nor_get_min_prot_length_sr(nor);
+ pow = ilog2(lock_len) - ilog2(min_prot_len) + 1;
+ val = pow << SR_BP_SHIFT;
+
+ if (nor->flags & SNOR_F_HAS_SR_BP3_BIT6 && val & SR_BP3)
+ val = (val & ~SR_BP3) | SR_BP3_BIT6;
+
+ if (val & ~mask)
+ return -EINVAL;
+
+ /* Don't "lock" with no region! */
+ if (!(val & mask))
+ return -EINVAL;
+ }
+
+ status_new = (status_old & ~mask & ~tb_mask) | val;
+
+ /* Disallow further writes if WP pin is asserted */
+ status_new |= SR_SRWD;
+
+ if (!use_top)
+ status_new |= tb_mask;
+
+ /* Don't bother if they're the same */
+ if (status_new == status_old)
+ return 0;
+
+ /* Only modify protection if it will not unlock other areas */
+ if ((status_new & mask) < (status_old & mask))
+ return -EINVAL;
+
+ return spi_nor_write_sr_and_check(nor, status_new);
+}
+
+/*
+ * Unlock a region of the flash. See spi_nor_sr_lock() for more info
+ *
+ * Returns negative on errors, 0 on success.
+ */
+static int spi_nor_sr_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+ struct mtd_info *mtd = &nor->mtd;
+ u64 min_prot_len;
+ int ret, status_old, status_new;
+ u8 mask = spi_nor_get_sr_bp_mask(nor);
+ u8 tb_mask = spi_nor_get_sr_tb_mask(nor);
+ u8 pow, val;
+ loff_t lock_len;
+ bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB;
+ bool use_top;
+
+ ret = spi_nor_read_sr(nor, nor->bouncebuf);
+ if (ret)
+ return ret;
+
+ status_old = nor->bouncebuf[0];
+
+ /* If nothing in our range is locked, we don't need to do anything */
+ if (spi_nor_is_unlocked_sr(nor, ofs, len, status_old))
+ return 0;
+
+ /* If anything below us is locked, we can't use 'top' protection */
+ if (!spi_nor_is_unlocked_sr(nor, 0, ofs, status_old))
+ can_be_top = false;
+
+ /* If anything above us is locked, we can't use 'bottom' protection */
+ if (!spi_nor_is_unlocked_sr(nor, ofs + len, mtd->size - (ofs + len),
+ status_old))
+ can_be_bottom = false;
+
+ if (!can_be_bottom && !can_be_top)
+ return -EINVAL;
+
+ /* Prefer top, if both are valid */
+ use_top = can_be_top;
+
+ /* lock_len: length of region that should remain locked */
+ if (use_top)
+ lock_len = mtd->size - (ofs + len);
+ else
+ lock_len = ofs;
+
+ if (lock_len == 0) {
+ val = 0; /* fully unlocked */
+ } else {
+ min_prot_len = spi_nor_get_min_prot_length_sr(nor);
+ pow = ilog2(lock_len) - ilog2(min_prot_len) + 1;
+ val = pow << SR_BP_SHIFT;
+
+ if (nor->flags & SNOR_F_HAS_SR_BP3_BIT6 && val & SR_BP3)
+ val = (val & ~SR_BP3) | SR_BP3_BIT6;
+
+ /* Some power-of-two sizes are not supported */
+ if (val & ~mask)
+ return -EINVAL;
+ }
+
+ status_new = (status_old & ~mask & ~tb_mask) | val;
+
+ /* Don't protect status register if we're fully unlocked */
+ if (lock_len == 0)
+ status_new &= ~SR_SRWD;
+
+ if (!use_top)
+ status_new |= tb_mask;
+
+ /* Don't bother if they're the same */
+ if (status_new == status_old)
+ return 0;
+
+ /* Only modify protection if it will not lock other areas */
+ if ((status_new & mask) > (status_old & mask))
+ return -EINVAL;
+
+ return spi_nor_write_sr_and_check(nor, status_new);
+}
+
+/*
+ * Check if a region of the flash is (completely) locked. See spi_nor_sr_lock()
+ * for more info.
+ *
+ * Returns 1 if entire region is locked, 0 if any portion is unlocked, and
+ * negative on errors.
+ */
+static int spi_nor_sr_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len)
+{
+ int ret;
+
+ ret = spi_nor_read_sr(nor, nor->bouncebuf);
+ if (ret)
+ return ret;
+
+ return spi_nor_is_locked_sr(nor, ofs, len, nor->bouncebuf[0]);
+}
+
+static const struct spi_nor_locking_ops spi_nor_sr_locking_ops = {
+ .lock = spi_nor_sr_lock,
+ .unlock = spi_nor_sr_unlock,
+ .is_locked = spi_nor_sr_is_locked,
+};
+
+static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+ struct spi_nor *nor = mtd_to_spi_nor(mtd);
+ int ret;
+
+ ret = spi_nor_lock_and_prep(nor);
+ if (ret)
+ return ret;
+
+ ret = nor->params->locking_ops->lock(nor, ofs, len);
+
+ spi_nor_unlock_and_unprep(nor);
+ return ret;
+}
+
+static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+ struct spi_nor *nor = mtd_to_spi_nor(mtd);
+ int ret;
+
+ ret = spi_nor_lock_and_prep(nor);
+ if (ret)
+ return ret;
+
+ ret = nor->params->locking_ops->unlock(nor, ofs, len);
+
+ spi_nor_unlock_and_unprep(nor);
+ return ret;
+}
+
+static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+ struct spi_nor *nor = mtd_to_spi_nor(mtd);
+ int ret;
+
+ ret = spi_nor_lock_and_prep(nor);
+ if (ret)
+ return ret;
+
+ ret = nor->params->locking_ops->is_locked(nor, ofs, len);
+
+ spi_nor_unlock_and_unprep(nor);
+ return ret;
+}
+
+/**
+ * spi_nor_sr1_bit6_quad_enable() - Set the Quad Enable BIT(6) in the Status
+ * Register 1.
+ * @nor: pointer to a 'struct spi_nor'
+ *
+ * Bit 6 of the Status Register 1 is the QE bit for Macronix like QSPI memories.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor)
+{
+ int ret;
+
+ ret = spi_nor_read_sr(nor, nor->bouncebuf);
+ if (ret)
+ return ret;
+
+ if (nor->bouncebuf[0] & SR1_QUAD_EN_BIT6)
+ return 0;
+
+ nor->bouncebuf[0] |= SR1_QUAD_EN_BIT6;
+
+ return spi_nor_write_sr1_and_check(nor, nor->bouncebuf[0]);
+}
+
+/**
+ * spi_nor_sr2_bit1_quad_enable() - set the Quad Enable BIT(1) in the Status
+ * Register 2.
+ * @nor: pointer to a 'struct spi_nor'.
+ *
+ * Bit 1 of the Status Register 2 is the QE bit for Spansion like QSPI memories.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor)
+{
+ int ret;
+
+ if (nor->flags & SNOR_F_NO_READ_CR)
+ return spi_nor_write_16bit_cr_and_check(nor, SR2_QUAD_EN_BIT1);
+
+ ret = spi_nor_read_cr(nor, nor->bouncebuf);
+ if (ret)
+ return ret;
+
+ if (nor->bouncebuf[0] & SR2_QUAD_EN_BIT1)
+ return 0;
+
+ nor->bouncebuf[0] |= SR2_QUAD_EN_BIT1;
+
+ return spi_nor_write_16bit_cr_and_check(nor, nor->bouncebuf[0]);
+}
+
+/**
+ * spi_nor_sr2_bit7_quad_enable() - set QE bit in Status Register 2.
+ * @nor: pointer to a 'struct spi_nor'
+ *
+ * Set the Quad Enable (QE) bit in the Status Register 2.
+ *
+ * This is one of the procedures to set the QE bit described in the SFDP
+ * (JESD216 rev B) specification but no manufacturer using this procedure has
+ * been identified yet, hence the name of the function.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
+{
+ u8 *sr2 = nor->bouncebuf;
+ int ret;
+ u8 sr2_written;
+
+ /* Check current Quad Enable bit value. */
+ ret = spi_nor_read_sr2(nor, sr2);
+ if (ret)
+ return ret;
+ if (*sr2 & SR2_QUAD_EN_BIT7)
+ return 0;
+
+ /* Update the Quad Enable bit. */
+ *sr2 |= SR2_QUAD_EN_BIT7;
+
+ ret = spi_nor_write_sr2(nor, sr2);
+ if (ret)
+ return ret;
+
+ sr2_written = *sr2;
+
+ /* Read back and check it. */
+ ret = spi_nor_read_sr2(nor, sr2);
+ if (ret)
+ return ret;
+
+ if (*sr2 != sr2_written) {
+ dev_dbg(nor->dev, "SR2: Read back test failed\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static const struct spi_nor_manufacturer *manufacturers[] = {
+ &spi_nor_atmel,
+ &spi_nor_catalyst,
+ &spi_nor_eon,
+ &spi_nor_esmt,
+ &spi_nor_everspin,
+ &spi_nor_fujitsu,
+ &spi_nor_gigadevice,
+ &spi_nor_intel,
+ &spi_nor_issi,
+ &spi_nor_macronix,
+ &spi_nor_micron,
+ &spi_nor_st,
+ &spi_nor_spansion,
+ &spi_nor_sst,
+ &spi_nor_winbond,
+ &spi_nor_xilinx,
+ &spi_nor_xmc,
+};
+
+static const struct flash_info *
+spi_nor_search_part_by_id(const struct flash_info *parts, unsigned int nparts,
+ const u8 *id)
+{
+ unsigned int i;
+
+ for (i = 0; i < nparts; i++) {
+ if (parts[i].id_len &&
+ !memcmp(parts[i].id, id, parts[i].id_len))
+ return &parts[i];
+ }
+
+ return NULL;
+}
+
+static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
+{
+ const struct flash_info *info;
+ u8 *id = nor->bouncebuf;
+ unsigned int i;
+ int ret;
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 1),
+ SPI_MEM_OP_NO_ADDR,
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_DATA_IN(SPI_NOR_MAX_ID_LEN, id, 1));
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDID, id,
+ SPI_NOR_MAX_ID_LEN);
+ }
+ if (ret) {
+ dev_dbg(nor->dev, "error %d reading JEDEC ID\n", ret);
+ return ERR_PTR(ret);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(manufacturers); i++) {
+ info = spi_nor_search_part_by_id(manufacturers[i]->parts,
+ manufacturers[i]->nparts,
+ id);
+ if (info) {
+ nor->manufacturer = manufacturers[i];
+ return info;
+ }
+ }
+
+ dev_err(nor->dev, "unrecognized JEDEC id bytes: %*ph\n",
+ SPI_NOR_MAX_ID_LEN, id);
+ return ERR_PTR(-ENODEV);
+}
+
+static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
+{
+ struct spi_nor *nor = mtd_to_spi_nor(mtd);
+ ssize_t ret;
+
+ dev_dbg(nor->dev, "from 0x%08x, len %zd\n", (u32)from, len);
+
+ ret = spi_nor_lock_and_prep(nor);
+ if (ret)
+ return ret;
+
+ while (len) {
+ loff_t addr = from;
+
+ addr = spi_nor_convert_addr(nor, addr);
+
+ ret = spi_nor_read_data(nor, addr, len, buf);
+ if (ret == 0) {
+ /* We shouldn't see 0-length reads */
+ ret = -EIO;
+ goto read_err;
+ }
+ if (ret < 0)
+ goto read_err;
+
+ WARN_ON(ret > len);
+ *retlen += ret;
+ buf += ret;
+ from += ret;
+ len -= ret;
+ }
+ ret = 0;
+
+read_err:
+ spi_nor_unlock_and_unprep(nor);
+ return ret;
+}
+
+/*
+ * Write an address range to the nor chip. Data must be written in
+ * FLASH_PAGESIZE chunks. The address range may be any size provided
+ * it is within the physical boundaries.
+ */
+static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ struct spi_nor *nor = mtd_to_spi_nor(mtd);
+ size_t page_offset, page_remain, i;
+ ssize_t ret;
+
+ dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
+
+ ret = spi_nor_lock_and_prep(nor);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < len; ) {
+ ssize_t written;
+ loff_t addr = to + i;
+
+ /*
+ * If page_size is a power of two, the offset can be quickly
+ * calculated with an AND operation. On the other cases we
+ * need to do a modulus operation (more expensive).
+ * Power of two numbers have only one bit set and we can use
+ * the instruction hweight32 to detect if we need to do a
+ * modulus (do_div()) or not.
+ */
+ if (hweight32(nor->page_size) == 1) {
+ page_offset = addr & (nor->page_size - 1);
+ } else {
+ uint64_t aux = addr;
+
+ page_offset = do_div(aux, nor->page_size);
+ }
+ /* the size of data remaining on the first page */
+ page_remain = min_t(size_t,
+ nor->page_size - page_offset, len - i);
+
+ addr = spi_nor_convert_addr(nor, addr);
+
+ ret = spi_nor_write_enable(nor);
+ if (ret)
+ goto write_err;
+
+ ret = spi_nor_write_data(nor, addr, page_remain, buf + i);
+ if (ret < 0)
+ goto write_err;
+ written = ret;
+
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ goto write_err;
+ *retlen += written;
+ i += written;
+ }
+
+write_err:
+ spi_nor_unlock_and_unprep(nor);
+ return ret;
+}
+
+static int spi_nor_check(struct spi_nor *nor)
+{
+ if (!nor->dev ||
+ (!nor->spimem && !nor->controller_ops) ||
+ (!nor->spimem && nor->controller_ops &&
+ (!nor->controller_ops->read ||
+ !nor->controller_ops->write ||
+ !nor->controller_ops->read_reg ||
+ !nor->controller_ops->write_reg))) {
+ pr_err("spi-nor: please fill all the necessary fields!\n");
+ return -EINVAL;
+ }
+
+ if (nor->spimem && nor->controller_ops) {
+ dev_err(nor->dev, "nor->spimem and nor->controller_ops are mutually exclusive, please set just one of them.\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void
+spi_nor_set_read_settings(struct spi_nor_read_command *read,
+ u8 num_mode_clocks,
+ u8 num_wait_states,
+ u8 opcode,
+ enum spi_nor_protocol proto)
+{
+ read->num_mode_clocks = num_mode_clocks;
+ read->num_wait_states = num_wait_states;
+ read->opcode = opcode;
+ read->proto = proto;
+}
+
+void spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, u8 opcode,
+ enum spi_nor_protocol proto)
+{
+ pp->opcode = opcode;
+ pp->proto = proto;
+}
+
+static int spi_nor_hwcaps2cmd(u32 hwcaps, const int table[][2], size_t size)
+{
+ size_t i;
+
+ for (i = 0; i < size; i++)
+ if (table[i][0] == (int)hwcaps)
+ return table[i][1];
+
+ return -EINVAL;
+}
+
+int spi_nor_hwcaps_read2cmd(u32 hwcaps)
+{
+ static const int hwcaps_read2cmd[][2] = {
+ { SNOR_HWCAPS_READ, SNOR_CMD_READ },
+ { SNOR_HWCAPS_READ_FAST, SNOR_CMD_READ_FAST },
+ { SNOR_HWCAPS_READ_1_1_1_DTR, SNOR_CMD_READ_1_1_1_DTR },
+ { SNOR_HWCAPS_READ_1_1_2, SNOR_CMD_READ_1_1_2 },
+ { SNOR_HWCAPS_READ_1_2_2, SNOR_CMD_READ_1_2_2 },
+ { SNOR_HWCAPS_READ_2_2_2, SNOR_CMD_READ_2_2_2 },
+ { SNOR_HWCAPS_READ_1_2_2_DTR, SNOR_CMD_READ_1_2_2_DTR },
+ { SNOR_HWCAPS_READ_1_1_4, SNOR_CMD_READ_1_1_4 },
+ { SNOR_HWCAPS_READ_1_4_4, SNOR_CMD_READ_1_4_4 },
+ { SNOR_HWCAPS_READ_4_4_4, SNOR_CMD_READ_4_4_4 },
+ { SNOR_HWCAPS_READ_1_4_4_DTR, SNOR_CMD_READ_1_4_4_DTR },
+ { SNOR_HWCAPS_READ_1_1_8, SNOR_CMD_READ_1_1_8 },
+ { SNOR_HWCAPS_READ_1_8_8, SNOR_CMD_READ_1_8_8 },
+ { SNOR_HWCAPS_READ_8_8_8, SNOR_CMD_READ_8_8_8 },
+ { SNOR_HWCAPS_READ_1_8_8_DTR, SNOR_CMD_READ_1_8_8_DTR },
+ };
+
+ return spi_nor_hwcaps2cmd(hwcaps, hwcaps_read2cmd,
+ ARRAY_SIZE(hwcaps_read2cmd));
+}
+
+static int spi_nor_hwcaps_pp2cmd(u32 hwcaps)
+{
+ static const int hwcaps_pp2cmd[][2] = {
+ { SNOR_HWCAPS_PP, SNOR_CMD_PP },
+ { SNOR_HWCAPS_PP_1_1_4, SNOR_CMD_PP_1_1_4 },
+ { SNOR_HWCAPS_PP_1_4_4, SNOR_CMD_PP_1_4_4 },
+ { SNOR_HWCAPS_PP_4_4_4, SNOR_CMD_PP_4_4_4 },
+ { SNOR_HWCAPS_PP_1_1_8, SNOR_CMD_PP_1_1_8 },
+ { SNOR_HWCAPS_PP_1_8_8, SNOR_CMD_PP_1_8_8 },
+ { SNOR_HWCAPS_PP_8_8_8, SNOR_CMD_PP_8_8_8 },
+ };
+
+ return spi_nor_hwcaps2cmd(hwcaps, hwcaps_pp2cmd,
+ ARRAY_SIZE(hwcaps_pp2cmd));
+}
+
+/**
+ * spi_nor_spimem_check_op - check if the operation is supported
+ * by controller
+ *@nor: pointer to a 'struct spi_nor'
+ *@op: pointer to op template to be checked
+ *
+ * Returns 0 if operation is supported, -ENOTSUPP otherwise.
+ */
+static int spi_nor_spimem_check_op(struct spi_nor *nor,
+ struct spi_mem_op *op)
+{
+ /*
+ * First test with 4 address bytes. The opcode itself might
+ * be a 3B addressing opcode but we don't care, because
+ * SPI controller implementation should not check the opcode,
+ * but just the sequence.
+ */
+ op->addr.nbytes = 4;
+ if (!spi_mem_supports_op(nor->spimem, op)) {
+ if (nor->mtd.size > SZ_16M)
+ return -ENOTSUPP;
+
+ /* If flash size <= 16MB, 3 address bytes are sufficient */
+ op->addr.nbytes = 3;
+ if (!spi_mem_supports_op(nor->spimem, op))
+ return -ENOTSUPP;
+ }
+
+ return 0;
+}
+
+/**
+ * spi_nor_spimem_check_readop - check if the read op is supported
+ * by controller
+ *@nor: pointer to a 'struct spi_nor'
+ *@read: pointer to op template to be checked
+ *
+ * Returns 0 if operation is supported, -ENOTSUPP otherwise.
+ */
+static int spi_nor_spimem_check_readop(struct spi_nor *nor,
+ const struct spi_nor_read_command *read)
+{
+ struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(read->opcode, 1),
+ SPI_MEM_OP_ADDR(3, 0, 1),
+ SPI_MEM_OP_DUMMY(0, 1),
+ SPI_MEM_OP_DATA_IN(0, NULL, 1));
+
+ op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(read->proto);
+ op.addr.buswidth = spi_nor_get_protocol_addr_nbits(read->proto);
+ op.data.buswidth = spi_nor_get_protocol_data_nbits(read->proto);
+ op.dummy.buswidth = op.addr.buswidth;
+ op.dummy.nbytes = (read->num_mode_clocks + read->num_wait_states) *
+ op.dummy.buswidth / 8;
+
+ return spi_nor_spimem_check_op(nor, &op);
+}
+
+/**
+ * spi_nor_spimem_check_pp - check if the page program op is supported
+ * by controller
+ *@nor: pointer to a 'struct spi_nor'
+ *@pp: pointer to op template to be checked
+ *
+ * Returns 0 if operation is supported, -ENOTSUPP otherwise.
+ */
+static int spi_nor_spimem_check_pp(struct spi_nor *nor,
+ const struct spi_nor_pp_command *pp)
+{
+ struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(pp->opcode, 1),
+ SPI_MEM_OP_ADDR(3, 0, 1),
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_DATA_OUT(0, NULL, 1));
+
+ op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(pp->proto);
+ op.addr.buswidth = spi_nor_get_protocol_addr_nbits(pp->proto);
+ op.data.buswidth = spi_nor_get_protocol_data_nbits(pp->proto);
+
+ return spi_nor_spimem_check_op(nor, &op);
+}
+
+/**
+ * spi_nor_spimem_adjust_hwcaps - Find optimal Read/Write protocol
+ * based on SPI controller capabilities
+ * @nor: pointer to a 'struct spi_nor'
+ * @hwcaps: pointer to resulting capabilities after adjusting
+ * according to controller and flash's capability
+ */
+static void
+spi_nor_spimem_adjust_hwcaps(struct spi_nor *nor, u32 *hwcaps)
+{
+ struct spi_nor_flash_parameter *params = nor->params;
+ unsigned int cap;
+
+ /* DTR modes are not supported yet, mask them all. */
+ *hwcaps &= ~SNOR_HWCAPS_DTR;
+
+ /* X-X-X modes are not supported yet, mask them all. */
+ *hwcaps &= ~SNOR_HWCAPS_X_X_X;
+
+ for (cap = 0; cap < sizeof(*hwcaps) * BITS_PER_BYTE; cap++) {
+ int rdidx, ppidx;
+
+ if (!(*hwcaps & BIT(cap)))
+ continue;
+
+ rdidx = spi_nor_hwcaps_read2cmd(BIT(cap));
+ if (rdidx >= 0 &&
+ spi_nor_spimem_check_readop(nor, ¶ms->reads[rdidx]))
+ *hwcaps &= ~BIT(cap);
+
+ ppidx = spi_nor_hwcaps_pp2cmd(BIT(cap));
+ if (ppidx < 0)
+ continue;
+
+ if (spi_nor_spimem_check_pp(nor,
+ ¶ms->page_programs[ppidx]))
+ *hwcaps &= ~BIT(cap);
+ }
+}
+
+/**
+ * spi_nor_set_erase_type() - set a SPI NOR erase type
+ * @erase: pointer to a structure that describes a SPI NOR erase type
+ * @size: the size of the sector/block erased by the erase type
+ * @opcode: the SPI command op code to erase the sector/block
+ */
+void spi_nor_set_erase_type(struct spi_nor_erase_type *erase, u32 size,
+ u8 opcode)
+{
+ erase->size = size;
+ erase->opcode = opcode;
+ /* JEDEC JESD216B Standard imposes erase sizes to be power of 2. */
+ erase->size_shift = ffs(erase->size) - 1;
+ erase->size_mask = (1 << erase->size_shift) - 1;
+}
+
+/**
+ * spi_nor_init_uniform_erase_map() - Initialize uniform erase map
+ * @map: the erase map of the SPI NOR
+ * @erase_mask: bitmask encoding erase types that can erase the entire
+ * flash memory
+ * @flash_size: the spi nor flash memory size
+ */
+void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map,
+ u8 erase_mask, u64 flash_size)
+{
+ /* Offset 0 with erase_mask and SNOR_LAST_REGION bit set */
+ map->uniform_region.offset = (erase_mask & SNOR_ERASE_TYPE_MASK) |
+ SNOR_LAST_REGION;
+ map->uniform_region.size = flash_size;
+ map->regions = &map->uniform_region;
+ map->uniform_erase_type = erase_mask;
+}
+
+int spi_nor_post_bfpt_fixups(struct spi_nor *nor,
+ const struct sfdp_parameter_header *bfpt_header,
+ const struct sfdp_bfpt *bfpt,
+ struct spi_nor_flash_parameter *params)
+{
+ int ret;
+
+ if (nor->manufacturer && nor->manufacturer->fixups &&
+ nor->manufacturer->fixups->post_bfpt) {
+ ret = nor->manufacturer->fixups->post_bfpt(nor, bfpt_header,
+ bfpt, params);
+ if (ret)
+ return ret;
+ }
+
+ if (nor->info->fixups && nor->info->fixups->post_bfpt)
+ return nor->info->fixups->post_bfpt(nor, bfpt_header, bfpt,
+ params);
+
+ return 0;
+}
+
+static int spi_nor_select_read(struct spi_nor *nor,
+ u32 shared_hwcaps)
+{
+ int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_READ_MASK) - 1;
+ const struct spi_nor_read_command *read;
+
+ if (best_match < 0)
+ return -EINVAL;
+
+ cmd = spi_nor_hwcaps_read2cmd(BIT(best_match));
+ if (cmd < 0)
+ return -EINVAL;
+
+ read = &nor->params->reads[cmd];
+ nor->read_opcode = read->opcode;
+ nor->read_proto = read->proto;
+
+ /*
+ * In the spi-nor framework, we don't need to make the difference
+ * between mode clock cycles and wait state clock cycles.
+ * Indeed, the value of the mode clock cycles is used by a QSPI
+ * flash memory to know whether it should enter or leave its 0-4-4
+ * (Continuous Read / XIP) mode.
+ * eXecution In Place is out of the scope of the mtd sub-system.
+ * Hence we choose to merge both mode and wait state clock cycles
+ * into the so called dummy clock cycles.
+ */
+ nor->read_dummy = read->num_mode_clocks + read->num_wait_states;
+ return 0;
+}
+
+static int spi_nor_select_pp(struct spi_nor *nor,
+ u32 shared_hwcaps)
+{
+ int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_PP_MASK) - 1;
+ const struct spi_nor_pp_command *pp;
+
+ if (best_match < 0)
+ return -EINVAL;
+
+ cmd = spi_nor_hwcaps_pp2cmd(BIT(best_match));
+ if (cmd < 0)
+ return -EINVAL;
+
+ pp = &nor->params->page_programs[cmd];
+ nor->program_opcode = pp->opcode;
+ nor->write_proto = pp->proto;
+ return 0;
+}
+
+/**
+ * spi_nor_select_uniform_erase() - select optimum uniform erase type
+ * @map: the erase map of the SPI NOR
+ * @wanted_size: the erase type size to search for. Contains the value of
+ * info->sector_size or of the "small sector" size in case
+ * CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is defined.
+ *
+ * Once the optimum uniform sector erase command is found, disable all the
+ * other.
+ *
+ * Return: pointer to erase type on success, NULL otherwise.
+ */
+static const struct spi_nor_erase_type *
+spi_nor_select_uniform_erase(struct spi_nor_erase_map *map,
+ const u32 wanted_size)
+{
+ const struct spi_nor_erase_type *tested_erase, *erase = NULL;
+ int i;
+ u8 uniform_erase_type = map->uniform_erase_type;
+
+ for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
+ if (!(uniform_erase_type & BIT(i)))
+ continue;
+
+ tested_erase = &map->erase_type[i];
+
+ /*
+ * If the current erase size is the one, stop here:
+ * we have found the right uniform Sector Erase command.
+ */
+ if (tested_erase->size == wanted_size) {
+ erase = tested_erase;
+ break;
+ }
+
+ /*
+ * Otherwise, the current erase size is still a valid canditate.
+ * Select the biggest valid candidate.
+ */
+ if (!erase && tested_erase->size)
+ erase = tested_erase;
+ /* keep iterating to find the wanted_size */
+ }
+
+ if (!erase)
+ return NULL;
+
+ /* Disable all other Sector Erase commands. */
+ map->uniform_erase_type &= ~SNOR_ERASE_TYPE_MASK;
+ map->uniform_erase_type |= BIT(erase - map->erase_type);
+ return erase;
+}
+
+static int spi_nor_select_erase(struct spi_nor *nor)
+{
+ struct spi_nor_erase_map *map = &nor->params->erase_map;
+ const struct spi_nor_erase_type *erase = NULL;
+ struct mtd_info *mtd = &nor->mtd;
+ u32 wanted_size = nor->info->sector_size;
+ int i;
+
+ /*
+ * The previous implementation handling Sector Erase commands assumed
+ * that the SPI flash memory has an uniform layout then used only one
+ * of the supported erase sizes for all Sector Erase commands.
+ * So to be backward compatible, the new implementation also tries to
+ * manage the SPI flash memory as uniform with a single erase sector
+ * size, when possible.
+ */
+#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
+ /* prefer "small sector" erase if possible */
+ wanted_size = 4096u;
+#endif
+
+ if (spi_nor_has_uniform_erase(nor)) {
+ erase = spi_nor_select_uniform_erase(map, wanted_size);
+ if (!erase)
+ return -EINVAL;
+ nor->erase_opcode = erase->opcode;
+ mtd->erasesize = erase->size;
+ return 0;
+ }
+
+ /*
+ * For non-uniform SPI flash memory, set mtd->erasesize to the
+ * maximum erase sector size. No need to set nor->erase_opcode.
+ */
+ for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
+ if (map->erase_type[i].size) {
+ erase = &map->erase_type[i];
+ break;
+ }
+ }
+
+ if (!erase)
+ return -EINVAL;
+
+ mtd->erasesize = erase->size;
+ return 0;
+}
+
+static int spi_nor_default_setup(struct spi_nor *nor,
+ const struct spi_nor_hwcaps *hwcaps)
+{
+ struct spi_nor_flash_parameter *params = nor->params;
+ u32 ignored_mask, shared_mask;
+ int err;
+
+ /*
+ * Keep only the hardware capabilities supported by both the SPI
+ * controller and the SPI flash memory.
+ */
+ shared_mask = hwcaps->mask & params->hwcaps.mask;
+
+ if (nor->spimem) {
+ /*
+ * When called from spi_nor_probe(), all caps are set and we
+ * need to discard some of them based on what the SPI
+ * controller actually supports (using spi_mem_supports_op()).
+ */
+ spi_nor_spimem_adjust_hwcaps(nor, &shared_mask);
+ } else {
+ /*
+ * SPI n-n-n protocols are not supported when the SPI
+ * controller directly implements the spi_nor interface.
+ * Yet another reason to switch to spi-mem.
+ */
+ ignored_mask = SNOR_HWCAPS_X_X_X;
+ if (shared_mask & ignored_mask) {
+ dev_dbg(nor->dev,
+ "SPI n-n-n protocols are not supported.\n");
+ shared_mask &= ~ignored_mask;
+ }
+ }
+
+ /* Select the (Fast) Read command. */
+ err = spi_nor_select_read(nor, shared_mask);
+ if (err) {
+ dev_dbg(nor->dev,
+ "can't select read settings supported by both the SPI controller and memory.\n");
+ return err;
+ }
+
+ /* Select the Page Program command. */
+ err = spi_nor_select_pp(nor, shared_mask);
+ if (err) {
+ dev_dbg(nor->dev,
+ "can't select write settings supported by both the SPI controller and memory.\n");
+ return err;
+ }
+
+ /* Select the Sector Erase command. */
+ err = spi_nor_select_erase(nor);
+ if (err) {
+ dev_dbg(nor->dev,
+ "can't select erase settings supported by both the SPI controller and memory.\n");
+ return err;
+ }
+
+ return 0;
+}
+
+static int spi_nor_setup(struct spi_nor *nor,
+ const struct spi_nor_hwcaps *hwcaps)
+{
+ if (!nor->params->setup)
+ return 0;
+
+ return nor->params->setup(nor, hwcaps);
+}
+
+/**
+ * spi_nor_manufacturer_init_params() - Initialize the flash's parameters and
+ * settings based on MFR register and ->default_init() hook.
+ * @nor: pointer to a 'struct spi-nor'.
+ */
+static void spi_nor_manufacturer_init_params(struct spi_nor *nor)
+{
+ if (nor->manufacturer && nor->manufacturer->fixups &&
+ nor->manufacturer->fixups->default_init)
+ nor->manufacturer->fixups->default_init(nor);
+
+ if (nor->info->fixups && nor->info->fixups->default_init)
+ nor->info->fixups->default_init(nor);
+}
+
+/**
+ * spi_nor_sfdp_init_params() - Initialize the flash's parameters and settings
+ * based on JESD216 SFDP standard.
+ * @nor: pointer to a 'struct spi-nor'.
+ *
+ * The method has a roll-back mechanism: in case the SFDP parsing fails, the
+ * legacy flash parameters and settings will be restored.
+ */
+static void spi_nor_sfdp_init_params(struct spi_nor *nor)
+{
+ struct spi_nor_flash_parameter sfdp_params;
+
+ memcpy(&sfdp_params, nor->params, sizeof(sfdp_params));
+
+ if (spi_nor_parse_sfdp(nor, &sfdp_params)) {
+ nor->addr_width = 0;
+ nor->flags &= ~SNOR_F_4B_OPCODES;
+ } else {
+ memcpy(nor->params, &sfdp_params, sizeof(*nor->params));
+ }
+}
+
+/**
+ * spi_nor_info_init_params() - Initialize the flash's parameters and settings
+ * based on nor->info data.
+ * @nor: pointer to a 'struct spi-nor'.
+ */
+static void spi_nor_info_init_params(struct spi_nor *nor)
+{
+ struct spi_nor_flash_parameter *params = nor->params;
+ struct spi_nor_erase_map *map = ¶ms->erase_map;
+ const struct flash_info *info = nor->info;
+ struct device_node *np = spi_nor_get_flash_node(nor);
+ u8 i, erase_mask;
+
+ /* Initialize legacy flash parameters and settings. */
+ params->quad_enable = spi_nor_sr2_bit1_quad_enable;
+ params->set_4byte_addr_mode = spansion_set_4byte_addr_mode;
+ params->setup = spi_nor_default_setup;
+ /* Default to 16-bit Write Status (01h) Command */
+ nor->flags |= SNOR_F_HAS_16BIT_SR;
+
+ /* Set SPI NOR sizes. */
+ params->size = (u64)info->sector_size * info->n_sectors;
+ params->page_size = info->page_size;
+
+ if (!(info->flags & SPI_NOR_NO_FR)) {
+ /* Default to Fast Read for DT and non-DT platform devices. */
+ params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
+
+ /* Mask out Fast Read if not requested at DT instantiation. */
+ if (np && !of_property_read_bool(np, "m25p,fast-read"))
+ params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
+ }
+
+ /* (Fast) Read settings. */
+ params->hwcaps.mask |= SNOR_HWCAPS_READ;
+ spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ],
+ 0, 0, SPINOR_OP_READ,
+ SNOR_PROTO_1_1_1);
+
+ if (params->hwcaps.mask & SNOR_HWCAPS_READ_FAST)
+ spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_FAST],
+ 0, 8, SPINOR_OP_READ_FAST,
+ SNOR_PROTO_1_1_1);
+
+ if (info->flags & SPI_NOR_DUAL_READ) {
+ params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
+ spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_2],
+ 0, 8, SPINOR_OP_READ_1_1_2,
+ SNOR_PROTO_1_1_2);
+ }
+
+ if (info->flags & SPI_NOR_QUAD_READ) {
+ params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
+ spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_4],
+ 0, 8, SPINOR_OP_READ_1_1_4,
+ SNOR_PROTO_1_1_4);
+ }
+
+ if (info->flags & SPI_NOR_OCTAL_READ) {
+ params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
+ spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_8],
+ 0, 8, SPINOR_OP_READ_1_1_8,
+ SNOR_PROTO_1_1_8);
+ }
+
+ /* Page Program settings. */
+ params->hwcaps.mask |= SNOR_HWCAPS_PP;
+ spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP],
+ SPINOR_OP_PP, SNOR_PROTO_1_1_1);
+
+ /*
+ * Sector Erase settings. Sort Erase Types in ascending order, with the
+ * smallest erase size starting at BIT(0).
+ */
+ erase_mask = 0;
+ i = 0;
+ if (info->flags & SECT_4K_PMC) {
+ erase_mask |= BIT(i);
+ spi_nor_set_erase_type(&map->erase_type[i], 4096u,
+ SPINOR_OP_BE_4K_PMC);
+ i++;
+ } else if (info->flags & SECT_4K) {
+ erase_mask |= BIT(i);
+ spi_nor_set_erase_type(&map->erase_type[i], 4096u,
+ SPINOR_OP_BE_4K);
+ i++;
+ }
+ erase_mask |= BIT(i);
+ spi_nor_set_erase_type(&map->erase_type[i], info->sector_size,
+ SPINOR_OP_SE);
+ spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
+}
+
+/**
+ * spi_nor_post_sfdp_fixups() - Updates the flash's parameters and settings
+ * after SFDP has been parsed (is also called for SPI NORs that do not
+ * support RDSFDP).
+ * @nor: pointer to a 'struct spi_nor'
+ *
+ * Typically used to tweak various parameters that could not be extracted by
+ * other means (i.e. when information provided by the SFDP/flash_info tables
+ * are incomplete or wrong).
+ */
+static void spi_nor_post_sfdp_fixups(struct spi_nor *nor)
+{
+ if (nor->manufacturer && nor->manufacturer->fixups &&
+ nor->manufacturer->fixups->post_sfdp)
+ nor->manufacturer->fixups->post_sfdp(nor);
+
+ if (nor->info->fixups && nor->info->fixups->post_sfdp)
+ nor->info->fixups->post_sfdp(nor);
+}
+
+/**
+ * spi_nor_late_init_params() - Late initialization of default flash parameters.
+ * @nor: pointer to a 'struct spi_nor'
+ *
+ * Used to set default flash parameters and settings when the ->default_init()
+ * hook or the SFDP parser let voids.
+ */
+static void spi_nor_late_init_params(struct spi_nor *nor)
+{
+ /*
+ * NOR protection support. When locking_ops are not provided, we pick
+ * the default ones.
+ */
+ if (nor->flags & SNOR_F_HAS_LOCK && !nor->params->locking_ops)
+ nor->params->locking_ops = &spi_nor_sr_locking_ops;
+}
+
+/**
+ * spi_nor_init_params() - Initialize the flash's parameters and settings.
+ * @nor: pointer to a 'struct spi-nor'.
+ *
+ * The flash parameters and settings are initialized based on a sequence of
+ * calls that are ordered by priority:
+ *
+ * 1/ Default flash parameters initialization. The initializations are done
+ * based on nor->info data:
+ * spi_nor_info_init_params()
+ *
+ * which can be overwritten by:
+ * 2/ Manufacturer flash parameters initialization. The initializations are
+ * done based on MFR register, or when the decisions can not be done solely
+ * based on MFR, by using specific flash_info tweeks, ->default_init():
+ * spi_nor_manufacturer_init_params()
+ *
+ * which can be overwritten by:
+ * 3/ SFDP flash parameters initialization. JESD216 SFDP is a standard and
+ * should be more accurate that the above.
+ * spi_nor_sfdp_init_params()
+ *
+ * Please note that there is a ->post_bfpt() fixup hook that can overwrite
+ * the flash parameters and settings immediately after parsing the Basic
+ * Flash Parameter Table.
+ *
+ * which can be overwritten by:
+ * 4/ Post SFDP flash parameters initialization. Used to tweak various
+ * parameters that could not be extracted by other means (i.e. when
+ * information provided by the SFDP/flash_info tables are incomplete or
+ * wrong).
+ * spi_nor_post_sfdp_fixups()
+ *
+ * 5/ Late default flash parameters initialization, used when the
+ * ->default_init() hook or the SFDP parser do not set specific params.
+ * spi_nor_late_init_params()
+ */
+static int spi_nor_init_params(struct spi_nor *nor)
+{
+ nor->params = devm_kzalloc(nor->dev, sizeof(*nor->params), GFP_KERNEL);
+ if (!nor->params)
+ return -ENOMEM;
+
+ spi_nor_info_init_params(nor);
+
+ spi_nor_manufacturer_init_params(nor);
+
+ if ((nor->info->flags & (SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)) &&
+ !(nor->info->flags & SPI_NOR_SKIP_SFDP))
+ spi_nor_sfdp_init_params(nor);
+
+ spi_nor_post_sfdp_fixups(nor);
+
+ spi_nor_late_init_params(nor);
+
+ return 0;
+}
+
+/**
+ * spi_nor_quad_enable() - enable Quad I/O if needed.
+ * @nor: pointer to a 'struct spi_nor'
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_quad_enable(struct spi_nor *nor)
+{
+ if (!nor->params->quad_enable)
+ return 0;
+
+ if (!(spi_nor_get_protocol_width(nor->read_proto) == 4 ||
+ spi_nor_get_protocol_width(nor->write_proto) == 4))
+ return 0;
+
+ return nor->params->quad_enable(nor);
+}
+
+/**
+ * spi_nor_unlock_all() - Unlocks the entire flash memory array.
+ * @nor: pointer to a 'struct spi_nor'.
+ *
+ * Some SPI NOR flashes are write protected by default after a power-on reset
+ * cycle, in order to avoid inadvertent writes during power-up. Backward
+ * compatibility imposes to unlock the entire flash memory array at power-up
+ * by default.
+ */
+static int spi_nor_unlock_all(struct spi_nor *nor)
+{
+ if (nor->flags & SNOR_F_HAS_LOCK)
+ return spi_nor_unlock(&nor->mtd, 0, nor->params->size);
+
+ return 0;
+}
+
+static int spi_nor_init(struct spi_nor *nor)
+{
+ int err;
+
+ err = spi_nor_quad_enable(nor);
+ if (err) {
+ dev_dbg(nor->dev, "quad mode not supported\n");
+ return err;
+ }
+
+ err = spi_nor_unlock_all(nor);
+ if (err) {
+ dev_dbg(nor->dev, "Failed to unlock the entire flash memory array\n");
+ return err;
+ }
+
+ if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES)) {
+ /*
+ * If the RESET# pin isn't hooked up properly, or the system
+ * otherwise doesn't perform a reset command in the boot
+ * sequence, it's impossible to 100% protect against unexpected
+ * reboots (e.g., crashes). Warn the user (or hopefully, system
+ * designer) that this is bad.
+ */
+ WARN_ONCE(nor->flags & SNOR_F_BROKEN_RESET,
+ "enabling reset hack; may not recover from unexpected reboots\n");
+ nor->params->set_4byte_addr_mode(nor, true);
+ }
+
+ return 0;
+}
+
+/* mtd resume handler */
+static void spi_nor_resume(struct mtd_info *mtd)
+{
+ struct spi_nor *nor = mtd_to_spi_nor(mtd);
+ struct device *dev = nor->dev;
+ int ret;
+
+ /* re-initialize the nor chip */
+ ret = spi_nor_init(nor);
+ if (ret)
+ dev_err(dev, "resume() failed\n");
+}
+
+void spi_nor_restore(struct spi_nor *nor)
+{
+ /* restore the addressing mode */
+ if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES) &&
+ nor->flags & SNOR_F_BROKEN_RESET)
+ nor->params->set_4byte_addr_mode(nor, false);
+}
+EXPORT_SYMBOL_GPL(spi_nor_restore);
+
+static const struct flash_info *spi_nor_match_id(struct spi_nor *nor,
+ const char *name)
+{
+ unsigned int i, j;
+
+ for (i = 0; i < ARRAY_SIZE(manufacturers); i++) {
+ for (j = 0; j < manufacturers[i]->nparts; j++) {
+ if (!strcmp(name, manufacturers[i]->parts[j].name)) {
+ nor->manufacturer = manufacturers[i];
+ return &manufacturers[i]->parts[j];
+ }
+ }
+ }
+
+ return NULL;
+}
+
+static int spi_nor_set_addr_width(struct spi_nor *nor)
+{
+ if (nor->addr_width) {
+ /* already configured from SFDP */
+ } else if (nor->info->addr_width) {
+ nor->addr_width = nor->info->addr_width;
+ } else if (nor->mtd.size > 0x1000000) {
+ /* enable 4-byte addressing if the device exceeds 16MiB */
+ nor->addr_width = 4;
+ } else {
+ nor->addr_width = 3;
+ }
+
+ if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
+ dev_dbg(nor->dev, "address width is too large: %u\n",
+ nor->addr_width);
+ return -EINVAL;
+ }
+
+ /* Set 4byte opcodes when possible. */
+ if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES &&
+ !(nor->flags & SNOR_F_HAS_4BAIT))
+ spi_nor_set_4byte_opcodes(nor);
+
+ return 0;
+}
+
+static void spi_nor_debugfs_init(struct spi_nor *nor,
+ const struct flash_info *info)
+{
+ struct mtd_info *mtd = &nor->mtd;
+
+ mtd->dbg.partname = info->name;
+ mtd->dbg.partid = devm_kasprintf(nor->dev, GFP_KERNEL, "spi-nor:%*phN",
+ info->id_len, info->id);
+}
+
+static const struct flash_info *spi_nor_get_flash_info(struct spi_nor *nor,
+ const char *name)
+{
+ const struct flash_info *info = NULL;
+
+ if (name)
+ info = spi_nor_match_id(nor, name);
+ /* Try to auto-detect if chip name wasn't specified or not found */
+ if (!info)
+ info = spi_nor_read_id(nor);
+ if (IS_ERR_OR_NULL(info))
+ return ERR_PTR(-ENOENT);
+
+ /*
+ * If caller has specified name of flash model that can normally be
+ * detected using JEDEC, let's verify it.
+ */
+ if (name && info->id_len) {
+ const struct flash_info *jinfo;
+
+ jinfo = spi_nor_read_id(nor);
+ if (IS_ERR(jinfo)) {
+ return jinfo;
+ } else if (jinfo != info) {
+ /*
+ * JEDEC knows better, so overwrite platform ID. We
+ * can't trust partitions any longer, but we'll let
+ * mtd apply them anyway, since some partitions may be
+ * marked read-only, and we don't want to lose that
+ * information, even if it's not 100% accurate.
+ */
+ dev_warn(nor->dev, "found %s, expected %s\n",
+ jinfo->name, info->name);
+ info = jinfo;
+ }
+ }
+
+ return info;
+}
+
+int spi_nor_scan(struct spi_nor *nor, const char *name,
+ const struct spi_nor_hwcaps *hwcaps)
+{
+ const struct flash_info *info;
+ struct device *dev = nor->dev;
+ struct mtd_info *mtd = &nor->mtd;
+ struct device_node *np = spi_nor_get_flash_node(nor);
+ int ret;
+ int i;
+
+ ret = spi_nor_check(nor);
+ if (ret)
+ return ret;
+
+ /* Reset SPI protocol for all commands. */
+ nor->reg_proto = SNOR_PROTO_1_1_1;
+ nor->read_proto = SNOR_PROTO_1_1_1;
+ nor->write_proto = SNOR_PROTO_1_1_1;
+
+ /*
+ * We need the bounce buffer early to read/write registers when going
+ * through the spi-mem layer (buffers have to be DMA-able).
+ * For spi-mem drivers, we'll reallocate a new buffer if
+ * nor->page_size turns out to be greater than PAGE_SIZE (which
+ * shouldn't happen before long since NOR pages are usually less
+ * than 1KB) after spi_nor_scan() returns.
+ */
+ nor->bouncebuf_size = PAGE_SIZE;
+ nor->bouncebuf = devm_kmalloc(dev, nor->bouncebuf_size,
+ GFP_KERNEL);
+ if (!nor->bouncebuf)
+ return -ENOMEM;
+
+ info = spi_nor_get_flash_info(nor, name);
+ if (IS_ERR(info))
+ return PTR_ERR(info);
+
+ nor->info = info;
+
+ spi_nor_debugfs_init(nor, info);
+
+ mutex_init(&nor->lock);
+
+ /*
+ * Make sure the XSR_RDY flag is set before calling
+ * spi_nor_wait_till_ready(). Xilinx S3AN share MFR
+ * with Atmel spi-nor
+ */
+ if (info->flags & SPI_NOR_XSR_RDY)
+ nor->flags |= SNOR_F_READY_XSR_RDY;
+
+ if (info->flags & SPI_NOR_HAS_LOCK)
+ nor->flags |= SNOR_F_HAS_LOCK;
+
+ mtd->_write = spi_nor_write;
+
+ /* Init flash parameters based on flash_info struct and SFDP */
+ ret = spi_nor_init_params(nor);
+ if (ret)
+ return ret;
+
+ if (!mtd->name)
+ mtd->name = dev_name(dev);
+ mtd->priv = nor;
+ mtd->type = MTD_NORFLASH;
+ mtd->writesize = 1;
+ mtd->flags = MTD_CAP_NORFLASH;
+ mtd->size = nor->params->size;
+ mtd->_erase = spi_nor_erase;
+ mtd->_read = spi_nor_read;
+ mtd->_resume = spi_nor_resume;
+
+ if (nor->params->locking_ops) {
+ mtd->_lock = spi_nor_lock;
+ mtd->_unlock = spi_nor_unlock;
+ mtd->_is_locked = spi_nor_is_locked;
+ }
+
+ if (info->flags & USE_FSR)
+ nor->flags |= SNOR_F_USE_FSR;
+ if (info->flags & SPI_NOR_HAS_TB) {
+ nor->flags |= SNOR_F_HAS_SR_TB;
+ if (info->flags & SPI_NOR_TB_SR_BIT6)
+ nor->flags |= SNOR_F_HAS_SR_TB_BIT6;
+ }
+
+ if (info->flags & NO_CHIP_ERASE)
+ nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
+ if (info->flags & USE_CLSR)
+ nor->flags |= SNOR_F_USE_CLSR;
+
+ if (info->flags & SPI_NOR_4BIT_BP) {
+ nor->flags |= SNOR_F_HAS_4BIT_BP;
+ if (info->flags & SPI_NOR_BP3_SR_BIT6)
+ nor->flags |= SNOR_F_HAS_SR_BP3_BIT6;
+ }
+
+ if (info->flags & SPI_NOR_NO_ERASE)
+ mtd->flags |= MTD_NO_ERASE;
+
+ mtd->dev.parent = dev;
+ nor->page_size = nor->params->page_size;
+ mtd->writebufsize = nor->page_size;
+
+ if (of_property_read_bool(np, "broken-flash-reset"))
+ nor->flags |= SNOR_F_BROKEN_RESET;
+
+ /*
+ * Configure the SPI memory:
+ * - select op codes for (Fast) Read, Page Program and Sector Erase.
+ * - set the number of dummy cycles (mode cycles + wait states).
+ * - set the SPI protocols for register and memory accesses.
+ */
+ ret = spi_nor_setup(nor, hwcaps);
+ if (ret)
+ return ret;
+
+ if (info->flags & SPI_NOR_4B_OPCODES)
+ nor->flags |= SNOR_F_4B_OPCODES;
+
+ ret = spi_nor_set_addr_width(nor);
+ if (ret)
+ return ret;
+
+ /* Send all the required SPI flash commands to initialize device */
+ ret = spi_nor_init(nor);
+ if (ret)
+ return ret;
+
+ dev_info(dev, "%s (%lld Kbytes)\n", info->name,
+ (long long)mtd->size >> 10);
+
+ dev_dbg(dev,
+ "mtd .name = %s, .size = 0x%llx (%lldMiB), "
+ ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
+ mtd->name, (long long)mtd->size, (long long)(mtd->size >> 20),
+ mtd->erasesize, mtd->erasesize / 1024, mtd->numeraseregions);
+
+ if (mtd->numeraseregions)
+ for (i = 0; i < mtd->numeraseregions; i++)
+ dev_dbg(dev,
+ "mtd.eraseregions[%d] = { .offset = 0x%llx, "
+ ".erasesize = 0x%.8x (%uKiB), "
+ ".numblocks = %d }\n",
+ i, (long long)mtd->eraseregions[i].offset,
+ mtd->eraseregions[i].erasesize,
+ mtd->eraseregions[i].erasesize / 1024,
+ mtd->eraseregions[i].numblocks);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(spi_nor_scan);
+
+static int spi_nor_create_read_dirmap(struct spi_nor *nor)
+{
+ struct spi_mem_dirmap_info info = {
+ .op_tmpl = SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 1),
+ SPI_MEM_OP_ADDR(nor->addr_width, 0, 1),
+ SPI_MEM_OP_DUMMY(nor->read_dummy, 1),
+ SPI_MEM_OP_DATA_IN(0, NULL, 1)),
+ .offset = 0,
+ .length = nor->mtd.size,
+ };
+ struct spi_mem_op *op = &info.op_tmpl;
+
+ /* get transfer protocols. */
+ op->cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto);
+ op->addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto);
+ op->dummy.buswidth = op->addr.buswidth;
+ op->data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto);
+
+ /* convert the dummy cycles to the number of bytes */
+ op->dummy.nbytes = (nor->read_dummy * op->dummy.buswidth) / 8;
+
+ nor->dirmap.rdesc = devm_spi_mem_dirmap_create(nor->dev, nor->spimem,
+ &info);
+ return PTR_ERR_OR_ZERO(nor->dirmap.rdesc);
+}
+
+static int spi_nor_create_write_dirmap(struct spi_nor *nor)
+{
+ struct spi_mem_dirmap_info info = {
+ .op_tmpl = SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 1),
+ SPI_MEM_OP_ADDR(nor->addr_width, 0, 1),
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_DATA_OUT(0, NULL, 1)),
+ .offset = 0,
+ .length = nor->mtd.size,
+ };
+ struct spi_mem_op *op = &info.op_tmpl;
+
+ /* get transfer protocols. */
+ op->cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto);
+ op->addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto);
+ op->dummy.buswidth = op->addr.buswidth;
+ op->data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto);
+
+ if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second)
+ op->addr.nbytes = 0;
+
+ nor->dirmap.wdesc = devm_spi_mem_dirmap_create(nor->dev, nor->spimem,
+ &info);
+ return PTR_ERR_OR_ZERO(nor->dirmap.wdesc);
+}
+
+static int spi_nor_probe(struct spi_mem *spimem)
+{
+ struct spi_device *spi = spimem->spi;
+ struct flash_platform_data *data = dev_get_platdata(&spi->dev);
+ struct spi_nor *nor;
+ /*
+ * Enable all caps by default. The core will mask them after
+ * checking what's really supported using spi_mem_supports_op().
+ */
+ const struct spi_nor_hwcaps hwcaps = { .mask = SNOR_HWCAPS_ALL };
+ char *flash_name;
+ int ret;
+
+ nor = devm_kzalloc(&spi->dev, sizeof(*nor), GFP_KERNEL);
+ if (!nor)
+ return -ENOMEM;
+
+ nor->spimem = spimem;
+ nor->dev = &spi->dev;
+ spi_nor_set_flash_node(nor, spi->dev.of_node);
+
+ spi_mem_set_drvdata(spimem, nor);
+
+ if (data && data->name)
+ nor->mtd.name = data->name;
+
+ if (!nor->mtd.name)
+ nor->mtd.name = spi_mem_get_name(spimem);
+
+ /*
+ * For some (historical?) reason many platforms provide two different
+ * names in flash_platform_data: "name" and "type". Quite often name is
+ * set to "m25p80" and then "type" provides a real chip name.
+ * If that's the case, respect "type" and ignore a "name".
+ */
+ if (data && data->type)
+ flash_name = data->type;
+ else if (!strcmp(spi->modalias, "spi-nor"))
+ flash_name = NULL; /* auto-detect */
+ else
+ flash_name = spi->modalias;
+
+ ret = spi_nor_scan(nor, flash_name, &hwcaps);
+ if (ret)
+ return ret;
+
+ /*
+ * None of the existing parts have > 512B pages, but let's play safe
+ * and add this logic so that if anyone ever adds support for such
+ * a NOR we don't end up with buffer overflows.
+ */
+ if (nor->page_size > PAGE_SIZE) {
+ nor->bouncebuf_size = nor->page_size;
+ devm_kfree(nor->dev, nor->bouncebuf);
+ nor->bouncebuf = devm_kmalloc(nor->dev,
+ nor->bouncebuf_size,
+ GFP_KERNEL);
+ if (!nor->bouncebuf)
+ return -ENOMEM;
+ }
+
+ ret = spi_nor_create_read_dirmap(nor);
+ if (ret)
+ return ret;
+
+ ret = spi_nor_create_write_dirmap(nor);
+ if (ret)
+ return ret;
+
+ return mtd_device_register(&nor->mtd, data ? data->parts : NULL,
+ data ? data->nr_parts : 0);
+}
+
+static int spi_nor_remove(struct spi_mem *spimem)
+{
+ struct spi_nor *nor = spi_mem_get_drvdata(spimem);
+
+ spi_nor_restore(nor);
+
+ /* Clean up MTD stuff. */
+ return mtd_device_unregister(&nor->mtd);
+}
+
+static void spi_nor_shutdown(struct spi_mem *spimem)
+{
+ struct spi_nor *nor = spi_mem_get_drvdata(spimem);
+
+ spi_nor_restore(nor);
+}
+
+/*
+ * Do NOT add to this array without reading the following:
+ *
+ * Historically, many flash devices are bound to this driver by their name. But
+ * since most of these flash are compatible to some extent, and their
+ * differences can often be differentiated by the JEDEC read-ID command, we
+ * encourage new users to add support to the spi-nor library, and simply bind
+ * against a generic string here (e.g., "jedec,spi-nor").
+ *
+ * Many flash names are kept here in this list (as well as in spi-nor.c) to
+ * keep them available as module aliases for existing platforms.
+ */
+static const struct spi_device_id spi_nor_dev_ids[] = {
+ /*
+ * Allow non-DT platform devices to bind to the "spi-nor" modalias, and
+ * hack around the fact that the SPI core does not provide uevent
+ * matching for .of_match_table
+ */
+ {"spi-nor"},
+
+ /*
+ * Entries not used in DTs that should be safe to drop after replacing
+ * them with "spi-nor" in platform data.
+ */
+ {"s25sl064a"}, {"w25x16"}, {"m25p10"}, {"m25px64"},
+
+ /*
+ * Entries that were used in DTs without "jedec,spi-nor" fallback and
+ * should be kept for backward compatibility.
+ */
+ {"at25df321a"}, {"at25df641"}, {"at26df081a"},
+ {"mx25l4005a"}, {"mx25l1606e"}, {"mx25l6405d"}, {"mx25l12805d"},
+ {"mx25l25635e"},{"mx66l51235l"},
+ {"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, {"n25q512a"},
+ {"s25fl256s1"}, {"s25fl512s"}, {"s25sl12801"}, {"s25fl008k"},
+ {"s25fl064k"},
+ {"sst25vf040b"},{"sst25vf016b"},{"sst25vf032b"},{"sst25wf040"},
+ {"m25p40"}, {"m25p80"}, {"m25p16"}, {"m25p32"},
+ {"m25p64"}, {"m25p128"},
+ {"w25x80"}, {"w25x32"}, {"w25q32"}, {"w25q32dw"},
+ {"w25q80bl"}, {"w25q128"}, {"w25q256"},
+
+ /* Flashes that can't be detected using JEDEC */
+ {"m25p05-nonjedec"}, {"m25p10-nonjedec"}, {"m25p20-nonjedec"},
+ {"m25p40-nonjedec"}, {"m25p80-nonjedec"}, {"m25p16-nonjedec"},
+ {"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"},
+
+ /* Everspin MRAMs (non-JEDEC) */
+ { "mr25h128" }, /* 128 Kib, 40 MHz */
+ { "mr25h256" }, /* 256 Kib, 40 MHz */
+ { "mr25h10" }, /* 1 Mib, 40 MHz */
+ { "mr25h40" }, /* 4 Mib, 40 MHz */
+
+ { },
+};
+MODULE_DEVICE_TABLE(spi, spi_nor_dev_ids);
+
+static const struct of_device_id spi_nor_of_table[] = {
+ /*
+ * Generic compatibility for SPI NOR that can be identified by the
+ * JEDEC READ ID opcode (0x9F). Use this, if possible.
+ */
+ { .compatible = "jedec,spi-nor" },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, spi_nor_of_table);
+
+/*
+ * REVISIT: many of these chips have deep power-down modes, which
+ * should clearly be entered on suspend() to minimize power use.
+ * And also when they're otherwise idle...
+ */
+static struct spi_mem_driver spi_nor_driver = {
+ .spidrv = {
+ .driver = {
+ .name = "spi-nor",
+ .of_match_table = spi_nor_of_table,
+ },
+ .id_table = spi_nor_dev_ids,
+ },
+ .probe = spi_nor_probe,
+ .remove = spi_nor_remove,
+ .shutdown = spi_nor_shutdown,
+};
+module_spi_mem_driver(spi_nor_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Huang Shijie <shijie8@gmail.com>");
+MODULE_AUTHOR("Mike Lavender");
+MODULE_DESCRIPTION("framework for SPI NOR");
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#ifndef __LINUX_MTD_SPI_NOR_INTERNAL_H
+#define __LINUX_MTD_SPI_NOR_INTERNAL_H
+
+#include "sfdp.h"
+
+#define SPI_NOR_MAX_ID_LEN 6
+
+enum spi_nor_option_flags {
+ SNOR_F_USE_FSR = BIT(0),
+ SNOR_F_HAS_SR_TB = BIT(1),
+ SNOR_F_NO_OP_CHIP_ERASE = BIT(2),
+ SNOR_F_READY_XSR_RDY = BIT(3),
+ SNOR_F_USE_CLSR = BIT(4),
+ SNOR_F_BROKEN_RESET = BIT(5),
+ SNOR_F_4B_OPCODES = BIT(6),
+ SNOR_F_HAS_4BAIT = BIT(7),
+ SNOR_F_HAS_LOCK = BIT(8),
+ SNOR_F_HAS_16BIT_SR = BIT(9),
+ SNOR_F_NO_READ_CR = BIT(10),
+ SNOR_F_HAS_SR_TB_BIT6 = BIT(11),
+ SNOR_F_HAS_4BIT_BP = BIT(12),
+ SNOR_F_HAS_SR_BP3_BIT6 = BIT(13),
+};
+
+struct spi_nor_read_command {
+ u8 num_mode_clocks;
+ u8 num_wait_states;
+ u8 opcode;
+ enum spi_nor_protocol proto;
+};
+
+struct spi_nor_pp_command {
+ u8 opcode;
+ enum spi_nor_protocol proto;
+};
+
+enum spi_nor_read_command_index {
+ SNOR_CMD_READ,
+ SNOR_CMD_READ_FAST,
+ SNOR_CMD_READ_1_1_1_DTR,
+
+ /* Dual SPI */
+ SNOR_CMD_READ_1_1_2,
+ SNOR_CMD_READ_1_2_2,
+ SNOR_CMD_READ_2_2_2,
+ SNOR_CMD_READ_1_2_2_DTR,
+
+ /* Quad SPI */
+ SNOR_CMD_READ_1_1_4,
+ SNOR_CMD_READ_1_4_4,
+ SNOR_CMD_READ_4_4_4,
+ SNOR_CMD_READ_1_4_4_DTR,
+
+ /* Octal SPI */
+ SNOR_CMD_READ_1_1_8,
+ SNOR_CMD_READ_1_8_8,
+ SNOR_CMD_READ_8_8_8,
+ SNOR_CMD_READ_1_8_8_DTR,
+
+ SNOR_CMD_READ_MAX
+};
+
+enum spi_nor_pp_command_index {
+ SNOR_CMD_PP,
+
+ /* Quad SPI */
+ SNOR_CMD_PP_1_1_4,
+ SNOR_CMD_PP_1_4_4,
+ SNOR_CMD_PP_4_4_4,
+
+ /* Octal SPI */
+ SNOR_CMD_PP_1_1_8,
+ SNOR_CMD_PP_1_8_8,
+ SNOR_CMD_PP_8_8_8,
+
+ SNOR_CMD_PP_MAX
+};
+
+/**
+ * struct spi_nor_erase_type - Structure to describe a SPI NOR erase type
+ * @size: the size of the sector/block erased by the erase type.
+ * JEDEC JESD216B imposes erase sizes to be a power of 2.
+ * @size_shift: @size is a power of 2, the shift is stored in
+ * @size_shift.
+ * @size_mask: the size mask based on @size_shift.
+ * @opcode: the SPI command op code to erase the sector/block.
+ * @idx: Erase Type index as sorted in the Basic Flash Parameter
+ * Table. It will be used to synchronize the supported
+ * Erase Types with the ones identified in the SFDP
+ * optional tables.
+ */
+struct spi_nor_erase_type {
+ u32 size;
+ u32 size_shift;
+ u32 size_mask;
+ u8 opcode;
+ u8 idx;
+};
+
+/**
+ * struct spi_nor_erase_command - Used for non-uniform erases
+ * The structure is used to describe a list of erase commands to be executed
+ * once we validate that the erase can be performed. The elements in the list
+ * are run-length encoded.
+ * @list: for inclusion into the list of erase commands.
+ * @count: how many times the same erase command should be
+ * consecutively used.
+ * @size: the size of the sector/block erased by the command.
+ * @opcode: the SPI command op code to erase the sector/block.
+ */
+struct spi_nor_erase_command {
+ struct list_head list;
+ u32 count;
+ u32 size;
+ u8 opcode;
+};
+
+/**
+ * struct spi_nor_erase_region - Structure to describe a SPI NOR erase region
+ * @offset: the offset in the data array of erase region start.
+ * LSB bits are used as a bitmask encoding flags to
+ * determine if this region is overlaid, if this region is
+ * the last in the SPI NOR flash memory and to indicate
+ * all the supported erase commands inside this region.
+ * The erase types are sorted in ascending order with the
+ * smallest Erase Type size being at BIT(0).
+ * @size: the size of the region in bytes.
+ */
+struct spi_nor_erase_region {
+ u64 offset;
+ u64 size;
+};
+
+#define SNOR_ERASE_TYPE_MAX 4
+#define SNOR_ERASE_TYPE_MASK GENMASK_ULL(SNOR_ERASE_TYPE_MAX - 1, 0)
+
+#define SNOR_LAST_REGION BIT(4)
+#define SNOR_OVERLAID_REGION BIT(5)
+
+#define SNOR_ERASE_FLAGS_MAX 6
+#define SNOR_ERASE_FLAGS_MASK GENMASK_ULL(SNOR_ERASE_FLAGS_MAX - 1, 0)
+
+/**
+ * struct spi_nor_erase_map - Structure to describe the SPI NOR erase map
+ * @regions: array of erase regions. The regions are consecutive in
+ * address space. Walking through the regions is done
+ * incrementally.
+ * @uniform_region: a pre-allocated erase region for SPI NOR with a uniform
+ * sector size (legacy implementation).
+ * @erase_type: an array of erase types shared by all the regions.
+ * The erase types are sorted in ascending order, with the
+ * smallest Erase Type size being the first member in the
+ * erase_type array.
+ * @uniform_erase_type: bitmask encoding erase types that can erase the
+ * entire memory. This member is completed at init by
+ * uniform and non-uniform SPI NOR flash memories if they
+ * support at least one erase type that can erase the
+ * entire memory.
+ */
+struct spi_nor_erase_map {
+ struct spi_nor_erase_region *regions;
+ struct spi_nor_erase_region uniform_region;
+ struct spi_nor_erase_type erase_type[SNOR_ERASE_TYPE_MAX];
+ u8 uniform_erase_type;
+};
+
+/**
+ * struct spi_nor_locking_ops - SPI NOR locking methods
+ * @lock: lock a region of the SPI NOR.
+ * @unlock: unlock a region of the SPI NOR.
+ * @is_locked: check if a region of the SPI NOR is completely locked
+ */
+struct spi_nor_locking_ops {
+ int (*lock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
+ int (*unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
+ int (*is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
+};
+
+/**
+ * struct spi_nor_flash_parameter - SPI NOR flash parameters and settings.
+ * Includes legacy flash parameters and settings that can be overwritten
+ * by the spi_nor_fixups hooks, or dynamically when parsing the JESD216
+ * Serial Flash Discoverable Parameters (SFDP) tables.
+ *
+ * @size: the flash memory density in bytes.
+ * @page_size: the page size of the SPI NOR flash memory.
+ * @hwcaps: describes the read and page program hardware
+ * capabilities.
+ * @reads: read capabilities ordered by priority: the higher index
+ * in the array, the higher priority.
+ * @page_programs: page program capabilities ordered by priority: the
+ * higher index in the array, the higher priority.
+ * @erase_map: the erase map parsed from the SFDP Sector Map Parameter
+ * Table.
+ * @quad_enable: enables SPI NOR quad mode.
+ * @set_4byte_addr_mode: puts the SPI NOR in 4 byte addressing mode.
+ * @convert_addr: converts an absolute address into something the flash
+ * will understand. Particularly useful when pagesize is
+ * not a power-of-2.
+ * @setup: configures the SPI NOR memory. Useful for SPI NOR
+ * flashes that have peculiarities to the SPI NOR standard
+ * e.g. different opcodes, specific address calculation,
+ * page size, etc.
+ * @locking_ops: SPI NOR locking methods.
+ */
+struct spi_nor_flash_parameter {
+ u64 size;
+ u32 page_size;
+
+ struct spi_nor_hwcaps hwcaps;
+ struct spi_nor_read_command reads[SNOR_CMD_READ_MAX];
+ struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX];
+
+ struct spi_nor_erase_map erase_map;
+
+ int (*quad_enable)(struct spi_nor *nor);
+ int (*set_4byte_addr_mode)(struct spi_nor *nor, bool enable);
+ u32 (*convert_addr)(struct spi_nor *nor, u32 addr);
+ int (*setup)(struct spi_nor *nor, const struct spi_nor_hwcaps *hwcaps);
+
+ const struct spi_nor_locking_ops *locking_ops;
+};
+
+/**
+ * struct spi_nor_fixups - SPI NOR fixup hooks
+ * @default_init: called after default flash parameters init. Used to tweak
+ * flash parameters when information provided by the flash_info
+ * table is incomplete or wrong.
+ * @post_bfpt: called after the BFPT table has been parsed
+ * @post_sfdp: called after SFDP has been parsed (is also called for SPI NORs
+ * that do not support RDSFDP). Typically used to tweak various
+ * parameters that could not be extracted by other means (i.e.
+ * when information provided by the SFDP/flash_info tables are
+ * incomplete or wrong).
+ *
+ * Those hooks can be used to tweak the SPI NOR configuration when the SFDP
+ * table is broken or not available.
+ */
+struct spi_nor_fixups {
+ void (*default_init)(struct spi_nor *nor);
+ int (*post_bfpt)(struct spi_nor *nor,
+ const struct sfdp_parameter_header *bfpt_header,
+ const struct sfdp_bfpt *bfpt,
+ struct spi_nor_flash_parameter *params);
+ void (*post_sfdp)(struct spi_nor *nor);
+};
+
+struct flash_info {
+ char *name;
+
+ /*
+ * This array stores the ID bytes.
+ * The first three bytes are the JEDIC ID.
+ * JEDEC ID zero means "no ID" (mostly older chips).
+ */
+ u8 id[SPI_NOR_MAX_ID_LEN];
+ u8 id_len;
+
+ /* The size listed here is what works with SPINOR_OP_SE, which isn't
+ * necessarily called a "sector" by the vendor.
+ */
+ unsigned sector_size;
+ u16 n_sectors;
+
+ u16 page_size;
+ u16 addr_width;
+
+ u32 flags;
+#define SECT_4K BIT(0) /* SPINOR_OP_BE_4K works uniformly */
+#define SPI_NOR_NO_ERASE BIT(1) /* No erase command needed */
+#define SST_WRITE BIT(2) /* use SST byte programming */
+#define SPI_NOR_NO_FR BIT(3) /* Can't do fastread */
+#define SECT_4K_PMC BIT(4) /* SPINOR_OP_BE_4K_PMC works uniformly */
+#define SPI_NOR_DUAL_READ BIT(5) /* Flash supports Dual Read */
+#define SPI_NOR_QUAD_READ BIT(6) /* Flash supports Quad Read */
+#define USE_FSR BIT(7) /* use flag status register */
+#define SPI_NOR_HAS_LOCK BIT(8) /* Flash supports lock/unlock via SR */
+#define SPI_NOR_HAS_TB BIT(9) /*
+ * Flash SR has Top/Bottom (TB) protect
+ * bit. Must be used with
+ * SPI_NOR_HAS_LOCK.
+ */
+#define SPI_NOR_XSR_RDY BIT(10) /*
+ * S3AN flashes have specific opcode to
+ * read the status register.
+ */
+#define SPI_NOR_4B_OPCODES BIT(11) /*
+ * Use dedicated 4byte address op codes
+ * to support memory size above 128Mib.
+ */
+#define NO_CHIP_ERASE BIT(12) /* Chip does not support chip erase */
+#define SPI_NOR_SKIP_SFDP BIT(13) /* Skip parsing of SFDP tables */
+#define USE_CLSR BIT(14) /* use CLSR command */
+#define SPI_NOR_OCTAL_READ BIT(15) /* Flash supports Octal Read */
+#define SPI_NOR_TB_SR_BIT6 BIT(16) /*
+ * Top/Bottom (TB) is bit 6 of
+ * status register. Must be used with
+ * SPI_NOR_HAS_TB.
+ */
+#define SPI_NOR_4BIT_BP BIT(17) /*
+ * Flash SR has 4 bit fields (BP0-3)
+ * for block protection.
+ */
+#define SPI_NOR_BP3_SR_BIT6 BIT(18) /*
+ * BP3 is bit 6 of status register.
+ * Must be used with SPI_NOR_4BIT_BP.
+ */
+
+ /* Part specific fixup hooks. */
+ const struct spi_nor_fixups *fixups;
+};
+
+/* Used when the "_ext_id" is two bytes at most */
+#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
+ .id = { \
+ ((_jedec_id) >> 16) & 0xff, \
+ ((_jedec_id) >> 8) & 0xff, \
+ (_jedec_id) & 0xff, \
+ ((_ext_id) >> 8) & 0xff, \
+ (_ext_id) & 0xff, \
+ }, \
+ .id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))), \
+ .sector_size = (_sector_size), \
+ .n_sectors = (_n_sectors), \
+ .page_size = 256, \
+ .flags = (_flags),
+
+#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
+ .id = { \
+ ((_jedec_id) >> 16) & 0xff, \
+ ((_jedec_id) >> 8) & 0xff, \
+ (_jedec_id) & 0xff, \
+ ((_ext_id) >> 16) & 0xff, \
+ ((_ext_id) >> 8) & 0xff, \
+ (_ext_id) & 0xff, \
+ }, \
+ .id_len = 6, \
+ .sector_size = (_sector_size), \
+ .n_sectors = (_n_sectors), \
+ .page_size = 256, \
+ .flags = (_flags),
+
+#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags) \
+ .sector_size = (_sector_size), \
+ .n_sectors = (_n_sectors), \
+ .page_size = (_page_size), \
+ .addr_width = (_addr_width), \
+ .flags = (_flags),
+
+#define S3AN_INFO(_jedec_id, _n_sectors, _page_size) \
+ .id = { \
+ ((_jedec_id) >> 16) & 0xff, \
+ ((_jedec_id) >> 8) & 0xff, \
+ (_jedec_id) & 0xff \
+ }, \
+ .id_len = 3, \
+ .sector_size = (8*_page_size), \
+ .n_sectors = (_n_sectors), \
+ .page_size = _page_size, \
+ .addr_width = 3, \
+ .flags = SPI_NOR_NO_FR | SPI_NOR_XSR_RDY,
+
+/**
+ * struct spi_nor_manufacturer - SPI NOR manufacturer object
+ * @name: manufacturer name
+ * @parts: array of parts supported by this manufacturer
+ * @nparts: number of entries in the parts array
+ * @fixups: hooks called at various points in time during spi_nor_scan()
+ */
+struct spi_nor_manufacturer {
+ const char *name;
+ const struct flash_info *parts;
+ unsigned int nparts;
+ const struct spi_nor_fixups *fixups;
+};
+
+/* Manufacturer drivers. */
+extern const struct spi_nor_manufacturer spi_nor_atmel;
+extern const struct spi_nor_manufacturer spi_nor_catalyst;
+extern const struct spi_nor_manufacturer spi_nor_eon;
+extern const struct spi_nor_manufacturer spi_nor_esmt;
+extern const struct spi_nor_manufacturer spi_nor_everspin;
+extern const struct spi_nor_manufacturer spi_nor_fujitsu;
+extern const struct spi_nor_manufacturer spi_nor_gigadevice;
+extern const struct spi_nor_manufacturer spi_nor_intel;
+extern const struct spi_nor_manufacturer spi_nor_issi;
+extern const struct spi_nor_manufacturer spi_nor_macronix;
+extern const struct spi_nor_manufacturer spi_nor_micron;
+extern const struct spi_nor_manufacturer spi_nor_st;
+extern const struct spi_nor_manufacturer spi_nor_spansion;
+extern const struct spi_nor_manufacturer spi_nor_sst;
+extern const struct spi_nor_manufacturer spi_nor_winbond;
+extern const struct spi_nor_manufacturer spi_nor_xilinx;
+extern const struct spi_nor_manufacturer spi_nor_xmc;
+
+int spi_nor_write_enable(struct spi_nor *nor);
+int spi_nor_write_disable(struct spi_nor *nor);
+int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable);
+int spi_nor_write_ear(struct spi_nor *nor, u8 ear);
+int spi_nor_wait_till_ready(struct spi_nor *nor);
+int spi_nor_lock_and_prep(struct spi_nor *nor);
+void spi_nor_unlock_and_unprep(struct spi_nor *nor);
+int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor);
+int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor);
+int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor);
+
+int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr);
+ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len,
+ u8 *buf);
+ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len,
+ const u8 *buf);
+
+int spi_nor_hwcaps_read2cmd(u32 hwcaps);
+u8 spi_nor_convert_3to4_read(u8 opcode);
+void spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, u8 opcode,
+ enum spi_nor_protocol proto);
+
+void spi_nor_set_erase_type(struct spi_nor_erase_type *erase, u32 size,
+ u8 opcode);
+struct spi_nor_erase_region *
+spi_nor_region_next(struct spi_nor_erase_region *region);
+void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map,
+ u8 erase_mask, u64 flash_size);
+
+int spi_nor_post_bfpt_fixups(struct spi_nor *nor,
+ const struct sfdp_parameter_header *bfpt_header,
+ const struct sfdp_bfpt *bfpt,
+ struct spi_nor_flash_parameter *params);
+
+static struct spi_nor __maybe_unused *mtd_to_spi_nor(struct mtd_info *mtd)
+{
+ return mtd->priv;
+}
+
+#endif /* __LINUX_MTD_SPI_NOR_INTERNAL_H */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info eon_parts[] = {
+ /* EON -- en25xxx */
+ { "en25f32", INFO(0x1c3116, 0, 64 * 1024, 64, SECT_4K) },
+ { "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) },
+ { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) },
+ { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
+ { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) },
+ { "en25q80a", INFO(0x1c3014, 0, 64 * 1024, 16,
+ SECT_4K | SPI_NOR_DUAL_READ) },
+ { "en25qh16", INFO(0x1c7015, 0, 64 * 1024, 32,
+ SECT_4K | SPI_NOR_DUAL_READ) },
+ { "en25qh32", INFO(0x1c7016, 0, 64 * 1024, 64, 0) },
+ { "en25qh64", INFO(0x1c7017, 0, 64 * 1024, 128,
+ SECT_4K | SPI_NOR_DUAL_READ) },
+ { "en25qh128", INFO(0x1c7018, 0, 64 * 1024, 256, 0) },
+ { "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) },
+ { "en25s64", INFO(0x1c3817, 0, 64 * 1024, 128, SECT_4K) },
+};
+
+const struct spi_nor_manufacturer spi_nor_eon = {
+ .name = "eon",
+ .parts = eon_parts,
+ .nparts = ARRAY_SIZE(eon_parts),
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info esmt_parts[] = {
+ /* ESMT */
+ { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64,
+ SECT_4K | SPI_NOR_HAS_LOCK) },
+ { "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64,
+ SECT_4K | SPI_NOR_HAS_LOCK) },
+ { "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128,
+ SECT_4K | SPI_NOR_HAS_LOCK) },
+};
+
+const struct spi_nor_manufacturer spi_nor_esmt = {
+ .name = "esmt",
+ .parts = esmt_parts,
+ .nparts = ARRAY_SIZE(esmt_parts),
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info everspin_parts[] = {
+ /* Everspin */
+ { "mr25h128", CAT25_INFO(16 * 1024, 1, 256, 2,
+ SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+ { "mr25h256", CAT25_INFO(32 * 1024, 1, 256, 2,
+ SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+ { "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3,
+ SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+ { "mr25h40", CAT25_INFO(512 * 1024, 1, 256, 3,
+ SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
+};
+
+const struct spi_nor_manufacturer spi_nor_everspin = {
+ .name = "everspin",
+ .parts = everspin_parts,
+ .nparts = ARRAY_SIZE(everspin_parts),
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info fujitsu_parts[] = {
+ /* Fujitsu */
+ { "mb85rs1mt", INFO(0x047f27, 0, 128 * 1024, 1, SPI_NOR_NO_ERASE) },
+};
+
+const struct spi_nor_manufacturer spi_nor_fujitsu = {
+ .name = "fujitsu",
+ .parts = fujitsu_parts,
+ .nparts = ARRAY_SIZE(fujitsu_parts),
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static void gd25q256_default_init(struct spi_nor *nor)
+{
+ /*
+ * Some manufacturer like GigaDevice may use different
+ * bit to set QE on different memories, so the MFR can't
+ * indicate the quad_enable method for this case, we need
+ * to set it in the default_init fixup hook.
+ */
+ nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
+}
+
+static struct spi_nor_fixups gd25q256_fixups = {
+ .default_init = gd25q256_default_init,
+};
+
+static const struct flash_info gigadevice_parts[] = {
+ { "gd25q16", INFO(0xc84015, 0, 64 * 1024, 32,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+ { "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+ { "gd25lq32", INFO(0xc86016, 0, 64 * 1024, 64,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+ { "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+ { "gd25lq64c", INFO(0xc86017, 0, 64 * 1024, 128,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+ { "gd25lq128d", INFO(0xc86018, 0, 64 * 1024, 256,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+ { "gd25q128", INFO(0xc84018, 0, 64 * 1024, 256,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+ { "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK |
+ SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6)
+ .fixups = &gd25q256_fixups },
+};
+
+const struct spi_nor_manufacturer spi_nor_gigadevice = {
+ .name = "gigadevice",
+ .parts = gigadevice_parts,
+ .nparts = ARRAY_SIZE(gigadevice_parts),
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * HiSilicon FMC SPI-NOR flash controller driver
- *
- * Copyright (c) 2015-2016 HiSilicon Technologies Co., Ltd.
- */
-#include <linux/bitops.h>
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/iopoll.h>
-#include <linux/module.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/spi-nor.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-/* Hardware register offsets and field definitions */
-#define FMC_CFG 0x00
-#define FMC_CFG_OP_MODE_MASK BIT_MASK(0)
-#define FMC_CFG_OP_MODE_BOOT 0
-#define FMC_CFG_OP_MODE_NORMAL 1
-#define FMC_CFG_FLASH_SEL(type) (((type) & 0x3) << 1)
-#define FMC_CFG_FLASH_SEL_MASK 0x6
-#define FMC_ECC_TYPE(type) (((type) & 0x7) << 5)
-#define FMC_ECC_TYPE_MASK GENMASK(7, 5)
-#define SPI_NOR_ADDR_MODE_MASK BIT_MASK(10)
-#define SPI_NOR_ADDR_MODE_3BYTES (0x0 << 10)
-#define SPI_NOR_ADDR_MODE_4BYTES (0x1 << 10)
-#define FMC_GLOBAL_CFG 0x04
-#define FMC_GLOBAL_CFG_WP_ENABLE BIT(6)
-#define FMC_SPI_TIMING_CFG 0x08
-#define TIMING_CFG_TCSH(nr) (((nr) & 0xf) << 8)
-#define TIMING_CFG_TCSS(nr) (((nr) & 0xf) << 4)
-#define TIMING_CFG_TSHSL(nr) ((nr) & 0xf)
-#define CS_HOLD_TIME 0x6
-#define CS_SETUP_TIME 0x6
-#define CS_DESELECT_TIME 0xf
-#define FMC_INT 0x18
-#define FMC_INT_OP_DONE BIT(0)
-#define FMC_INT_CLR 0x20
-#define FMC_CMD 0x24
-#define FMC_CMD_CMD1(cmd) ((cmd) & 0xff)
-#define FMC_ADDRL 0x2c
-#define FMC_OP_CFG 0x30
-#define OP_CFG_FM_CS(cs) ((cs) << 11)
-#define OP_CFG_MEM_IF_TYPE(type) (((type) & 0x7) << 7)
-#define OP_CFG_ADDR_NUM(addr) (((addr) & 0x7) << 4)
-#define OP_CFG_DUMMY_NUM(dummy) ((dummy) & 0xf)
-#define FMC_DATA_NUM 0x38
-#define FMC_DATA_NUM_CNT(cnt) ((cnt) & GENMASK(13, 0))
-#define FMC_OP 0x3c
-#define FMC_OP_DUMMY_EN BIT(8)
-#define FMC_OP_CMD1_EN BIT(7)
-#define FMC_OP_ADDR_EN BIT(6)
-#define FMC_OP_WRITE_DATA_EN BIT(5)
-#define FMC_OP_READ_DATA_EN BIT(2)
-#define FMC_OP_READ_STATUS_EN BIT(1)
-#define FMC_OP_REG_OP_START BIT(0)
-#define FMC_DMA_LEN 0x40
-#define FMC_DMA_LEN_SET(len) ((len) & GENMASK(27, 0))
-#define FMC_DMA_SADDR_D0 0x4c
-#define HIFMC_DMA_MAX_LEN (4096)
-#define HIFMC_DMA_MASK (HIFMC_DMA_MAX_LEN - 1)
-#define FMC_OP_DMA 0x68
-#define OP_CTRL_RD_OPCODE(code) (((code) & 0xff) << 16)
-#define OP_CTRL_WR_OPCODE(code) (((code) & 0xff) << 8)
-#define OP_CTRL_RW_OP(op) ((op) << 1)
-#define OP_CTRL_DMA_OP_READY BIT(0)
-#define FMC_OP_READ 0x0
-#define FMC_OP_WRITE 0x1
-#define FMC_WAIT_TIMEOUT 1000000
-
-enum hifmc_iftype {
- IF_TYPE_STD,
- IF_TYPE_DUAL,
- IF_TYPE_DIO,
- IF_TYPE_QUAD,
- IF_TYPE_QIO,
-};
-
-struct hifmc_priv {
- u32 chipselect;
- u32 clkrate;
- struct hifmc_host *host;
-};
-
-#define HIFMC_MAX_CHIP_NUM 2
-struct hifmc_host {
- struct device *dev;
- struct mutex lock;
-
- void __iomem *regbase;
- void __iomem *iobase;
- struct clk *clk;
- void *buffer;
- dma_addr_t dma_buffer;
-
- struct spi_nor *nor[HIFMC_MAX_CHIP_NUM];
- u32 num_chip;
-};
-
-static inline int hisi_spi_nor_wait_op_finish(struct hifmc_host *host)
-{
- u32 reg;
-
- return readl_poll_timeout(host->regbase + FMC_INT, reg,
- (reg & FMC_INT_OP_DONE), 0, FMC_WAIT_TIMEOUT);
-}
-
-static int hisi_spi_nor_get_if_type(enum spi_nor_protocol proto)
-{
- enum hifmc_iftype if_type;
-
- switch (proto) {
- case SNOR_PROTO_1_1_2:
- if_type = IF_TYPE_DUAL;
- break;
- case SNOR_PROTO_1_2_2:
- if_type = IF_TYPE_DIO;
- break;
- case SNOR_PROTO_1_1_4:
- if_type = IF_TYPE_QUAD;
- break;
- case SNOR_PROTO_1_4_4:
- if_type = IF_TYPE_QIO;
- break;
- case SNOR_PROTO_1_1_1:
- default:
- if_type = IF_TYPE_STD;
- break;
- }
-
- return if_type;
-}
-
-static void hisi_spi_nor_init(struct hifmc_host *host)
-{
- u32 reg;
-
- reg = TIMING_CFG_TCSH(CS_HOLD_TIME)
- | TIMING_CFG_TCSS(CS_SETUP_TIME)
- | TIMING_CFG_TSHSL(CS_DESELECT_TIME);
- writel(reg, host->regbase + FMC_SPI_TIMING_CFG);
-}
-
-static int hisi_spi_nor_prep(struct spi_nor *nor)
-{
- struct hifmc_priv *priv = nor->priv;
- struct hifmc_host *host = priv->host;
- int ret;
-
- mutex_lock(&host->lock);
-
- ret = clk_set_rate(host->clk, priv->clkrate);
- if (ret)
- goto out;
-
- ret = clk_prepare_enable(host->clk);
- if (ret)
- goto out;
-
- return 0;
-
-out:
- mutex_unlock(&host->lock);
- return ret;
-}
-
-static void hisi_spi_nor_unprep(struct spi_nor *nor)
-{
- struct hifmc_priv *priv = nor->priv;
- struct hifmc_host *host = priv->host;
-
- clk_disable_unprepare(host->clk);
- mutex_unlock(&host->lock);
-}
-
-static int hisi_spi_nor_op_reg(struct spi_nor *nor,
- u8 opcode, size_t len, u8 optype)
-{
- struct hifmc_priv *priv = nor->priv;
- struct hifmc_host *host = priv->host;
- u32 reg;
-
- reg = FMC_CMD_CMD1(opcode);
- writel(reg, host->regbase + FMC_CMD);
-
- reg = FMC_DATA_NUM_CNT(len);
- writel(reg, host->regbase + FMC_DATA_NUM);
-
- reg = OP_CFG_FM_CS(priv->chipselect);
- writel(reg, host->regbase + FMC_OP_CFG);
-
- writel(0xff, host->regbase + FMC_INT_CLR);
- reg = FMC_OP_CMD1_EN | FMC_OP_REG_OP_START | optype;
- writel(reg, host->regbase + FMC_OP);
-
- return hisi_spi_nor_wait_op_finish(host);
-}
-
-static int hisi_spi_nor_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
- size_t len)
-{
- struct hifmc_priv *priv = nor->priv;
- struct hifmc_host *host = priv->host;
- int ret;
-
- ret = hisi_spi_nor_op_reg(nor, opcode, len, FMC_OP_READ_DATA_EN);
- if (ret)
- return ret;
-
- memcpy_fromio(buf, host->iobase, len);
- return 0;
-}
-
-static int hisi_spi_nor_write_reg(struct spi_nor *nor, u8 opcode,
- const u8 *buf, size_t len)
-{
- struct hifmc_priv *priv = nor->priv;
- struct hifmc_host *host = priv->host;
-
- if (len)
- memcpy_toio(host->iobase, buf, len);
-
- return hisi_spi_nor_op_reg(nor, opcode, len, FMC_OP_WRITE_DATA_EN);
-}
-
-static int hisi_spi_nor_dma_transfer(struct spi_nor *nor, loff_t start_off,
- dma_addr_t dma_buf, size_t len, u8 op_type)
-{
- struct hifmc_priv *priv = nor->priv;
- struct hifmc_host *host = priv->host;
- u8 if_type = 0;
- u32 reg;
-
- reg = readl(host->regbase + FMC_CFG);
- reg &= ~(FMC_CFG_OP_MODE_MASK | SPI_NOR_ADDR_MODE_MASK);
- reg |= FMC_CFG_OP_MODE_NORMAL;
- reg |= (nor->addr_width == 4) ? SPI_NOR_ADDR_MODE_4BYTES
- : SPI_NOR_ADDR_MODE_3BYTES;
- writel(reg, host->regbase + FMC_CFG);
-
- writel(start_off, host->regbase + FMC_ADDRL);
- writel(dma_buf, host->regbase + FMC_DMA_SADDR_D0);
- writel(FMC_DMA_LEN_SET(len), host->regbase + FMC_DMA_LEN);
-
- reg = OP_CFG_FM_CS(priv->chipselect);
- if (op_type == FMC_OP_READ)
- if_type = hisi_spi_nor_get_if_type(nor->read_proto);
- else
- if_type = hisi_spi_nor_get_if_type(nor->write_proto);
- reg |= OP_CFG_MEM_IF_TYPE(if_type);
- if (op_type == FMC_OP_READ)
- reg |= OP_CFG_DUMMY_NUM(nor->read_dummy >> 3);
- writel(reg, host->regbase + FMC_OP_CFG);
-
- writel(0xff, host->regbase + FMC_INT_CLR);
- reg = OP_CTRL_RW_OP(op_type) | OP_CTRL_DMA_OP_READY;
- reg |= (op_type == FMC_OP_READ)
- ? OP_CTRL_RD_OPCODE(nor->read_opcode)
- : OP_CTRL_WR_OPCODE(nor->program_opcode);
- writel(reg, host->regbase + FMC_OP_DMA);
-
- return hisi_spi_nor_wait_op_finish(host);
-}
-
-static ssize_t hisi_spi_nor_read(struct spi_nor *nor, loff_t from, size_t len,
- u_char *read_buf)
-{
- struct hifmc_priv *priv = nor->priv;
- struct hifmc_host *host = priv->host;
- size_t offset;
- int ret;
-
- for (offset = 0; offset < len; offset += HIFMC_DMA_MAX_LEN) {
- size_t trans = min_t(size_t, HIFMC_DMA_MAX_LEN, len - offset);
-
- ret = hisi_spi_nor_dma_transfer(nor,
- from + offset, host->dma_buffer, trans, FMC_OP_READ);
- if (ret) {
- dev_warn(nor->dev, "DMA read timeout\n");
- return ret;
- }
- memcpy(read_buf + offset, host->buffer, trans);
- }
-
- return len;
-}
-
-static ssize_t hisi_spi_nor_write(struct spi_nor *nor, loff_t to,
- size_t len, const u_char *write_buf)
-{
- struct hifmc_priv *priv = nor->priv;
- struct hifmc_host *host = priv->host;
- size_t offset;
- int ret;
-
- for (offset = 0; offset < len; offset += HIFMC_DMA_MAX_LEN) {
- size_t trans = min_t(size_t, HIFMC_DMA_MAX_LEN, len - offset);
-
- memcpy(host->buffer, write_buf + offset, trans);
- ret = hisi_spi_nor_dma_transfer(nor,
- to + offset, host->dma_buffer, trans, FMC_OP_WRITE);
- if (ret) {
- dev_warn(nor->dev, "DMA write timeout\n");
- return ret;
- }
- }
-
- return len;
-}
-
-static const struct spi_nor_controller_ops hisi_controller_ops = {
- .prepare = hisi_spi_nor_prep,
- .unprepare = hisi_spi_nor_unprep,
- .read_reg = hisi_spi_nor_read_reg,
- .write_reg = hisi_spi_nor_write_reg,
- .read = hisi_spi_nor_read,
- .write = hisi_spi_nor_write,
-};
-
-/**
- * Get spi flash device information and register it as a mtd device.
- */
-static int hisi_spi_nor_register(struct device_node *np,
- struct hifmc_host *host)
-{
- const struct spi_nor_hwcaps hwcaps = {
- .mask = SNOR_HWCAPS_READ |
- SNOR_HWCAPS_READ_FAST |
- SNOR_HWCAPS_READ_1_1_2 |
- SNOR_HWCAPS_READ_1_1_4 |
- SNOR_HWCAPS_PP,
- };
- struct device *dev = host->dev;
- struct spi_nor *nor;
- struct hifmc_priv *priv;
- struct mtd_info *mtd;
- int ret;
-
- nor = devm_kzalloc(dev, sizeof(*nor), GFP_KERNEL);
- if (!nor)
- return -ENOMEM;
-
- nor->dev = dev;
- spi_nor_set_flash_node(nor, np);
-
- priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- ret = of_property_read_u32(np, "reg", &priv->chipselect);
- if (ret) {
- dev_err(dev, "There's no reg property for %pOF\n",
- np);
- return ret;
- }
-
- ret = of_property_read_u32(np, "spi-max-frequency",
- &priv->clkrate);
- if (ret) {
- dev_err(dev, "There's no spi-max-frequency property for %pOF\n",
- np);
- return ret;
- }
- priv->host = host;
- nor->priv = priv;
- nor->controller_ops = &hisi_controller_ops;
-
- ret = spi_nor_scan(nor, NULL, &hwcaps);
- if (ret)
- return ret;
-
- mtd = &nor->mtd;
- mtd->name = np->name;
- ret = mtd_device_register(mtd, NULL, 0);
- if (ret)
- return ret;
-
- host->nor[host->num_chip] = nor;
- host->num_chip++;
- return 0;
-}
-
-static void hisi_spi_nor_unregister_all(struct hifmc_host *host)
-{
- int i;
-
- for (i = 0; i < host->num_chip; i++)
- mtd_device_unregister(&host->nor[i]->mtd);
-}
-
-static int hisi_spi_nor_register_all(struct hifmc_host *host)
-{
- struct device *dev = host->dev;
- struct device_node *np;
- int ret;
-
- for_each_available_child_of_node(dev->of_node, np) {
- ret = hisi_spi_nor_register(np, host);
- if (ret)
- goto fail;
-
- if (host->num_chip == HIFMC_MAX_CHIP_NUM) {
- dev_warn(dev, "Flash device number exceeds the maximum chipselect number\n");
- of_node_put(np);
- break;
- }
- }
-
- return 0;
-
-fail:
- hisi_spi_nor_unregister_all(host);
- return ret;
-}
-
-static int hisi_spi_nor_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct resource *res;
- struct hifmc_host *host;
- int ret;
-
- host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
- if (!host)
- return -ENOMEM;
-
- platform_set_drvdata(pdev, host);
- host->dev = dev;
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "control");
- host->regbase = devm_ioremap_resource(dev, res);
- if (IS_ERR(host->regbase))
- return PTR_ERR(host->regbase);
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "memory");
- host->iobase = devm_ioremap_resource(dev, res);
- if (IS_ERR(host->iobase))
- return PTR_ERR(host->iobase);
-
- host->clk = devm_clk_get(dev, NULL);
- if (IS_ERR(host->clk))
- return PTR_ERR(host->clk);
-
- ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
- if (ret) {
- dev_warn(dev, "Unable to set dma mask\n");
- return ret;
- }
-
- host->buffer = dmam_alloc_coherent(dev, HIFMC_DMA_MAX_LEN,
- &host->dma_buffer, GFP_KERNEL);
- if (!host->buffer)
- return -ENOMEM;
-
- ret = clk_prepare_enable(host->clk);
- if (ret)
- return ret;
-
- mutex_init(&host->lock);
- hisi_spi_nor_init(host);
- ret = hisi_spi_nor_register_all(host);
- if (ret)
- mutex_destroy(&host->lock);
-
- clk_disable_unprepare(host->clk);
- return ret;
-}
-
-static int hisi_spi_nor_remove(struct platform_device *pdev)
-{
- struct hifmc_host *host = platform_get_drvdata(pdev);
-
- hisi_spi_nor_unregister_all(host);
- mutex_destroy(&host->lock);
- clk_disable_unprepare(host->clk);
- return 0;
-}
-
-static const struct of_device_id hisi_spi_nor_dt_ids[] = {
- { .compatible = "hisilicon,fmc-spi-nor"},
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, hisi_spi_nor_dt_ids);
-
-static struct platform_driver hisi_spi_nor_driver = {
- .driver = {
- .name = "hisi-sfc",
- .of_match_table = hisi_spi_nor_dt_ids,
- },
- .probe = hisi_spi_nor_probe,
- .remove = hisi_spi_nor_remove,
-};
-module_platform_driver(hisi_spi_nor_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("HiSilicon SPI Nor Flash Controller Driver");
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Intel PCH/PCU SPI flash PCI driver.
- *
- * Copyright (C) 2016, Intel Corporation
- * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
- */
-
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-
-#include "intel-spi.h"
-
-#define BCR 0xdc
-#define BCR_WPD BIT(0)
-
-static const struct intel_spi_boardinfo bxt_info = {
- .type = INTEL_SPI_BXT,
-};
-
-static const struct intel_spi_boardinfo cnl_info = {
- .type = INTEL_SPI_CNL,
-};
-
-static int intel_spi_pci_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
-{
- struct intel_spi_boardinfo *info;
- struct intel_spi *ispi;
- u32 bcr;
- int ret;
-
- ret = pcim_enable_device(pdev);
- if (ret)
- return ret;
-
- info = devm_kmemdup(&pdev->dev, (void *)id->driver_data, sizeof(*info),
- GFP_KERNEL);
- if (!info)
- return -ENOMEM;
-
- /* Try to make the chip read/write */
- pci_read_config_dword(pdev, BCR, &bcr);
- if (!(bcr & BCR_WPD)) {
- bcr |= BCR_WPD;
- pci_write_config_dword(pdev, BCR, bcr);
- pci_read_config_dword(pdev, BCR, &bcr);
- }
- info->writeable = !!(bcr & BCR_WPD);
-
- ispi = intel_spi_probe(&pdev->dev, &pdev->resource[0], info);
- if (IS_ERR(ispi))
- return PTR_ERR(ispi);
-
- pci_set_drvdata(pdev, ispi);
- return 0;
-}
-
-static void intel_spi_pci_remove(struct pci_dev *pdev)
-{
- intel_spi_remove(pci_get_drvdata(pdev));
-}
-
-static const struct pci_device_id intel_spi_pci_ids[] = {
- { PCI_VDEVICE(INTEL, 0x02a4), (unsigned long)&bxt_info },
- { PCI_VDEVICE(INTEL, 0x06a4), (unsigned long)&bxt_info },
- { PCI_VDEVICE(INTEL, 0x18e0), (unsigned long)&bxt_info },
- { PCI_VDEVICE(INTEL, 0x19e0), (unsigned long)&bxt_info },
- { PCI_VDEVICE(INTEL, 0x34a4), (unsigned long)&bxt_info },
- { PCI_VDEVICE(INTEL, 0x4b24), (unsigned long)&bxt_info },
- { PCI_VDEVICE(INTEL, 0x4da4), (unsigned long)&bxt_info },
- { PCI_VDEVICE(INTEL, 0xa0a4), (unsigned long)&bxt_info },
- { PCI_VDEVICE(INTEL, 0xa1a4), (unsigned long)&bxt_info },
- { PCI_VDEVICE(INTEL, 0xa224), (unsigned long)&bxt_info },
- { PCI_VDEVICE(INTEL, 0xa324), (unsigned long)&cnl_info },
- { PCI_VDEVICE(INTEL, 0xa3a4), (unsigned long)&bxt_info },
- { },
-};
-MODULE_DEVICE_TABLE(pci, intel_spi_pci_ids);
-
-static struct pci_driver intel_spi_pci_driver = {
- .name = "intel-spi",
- .id_table = intel_spi_pci_ids,
- .probe = intel_spi_pci_probe,
- .remove = intel_spi_pci_remove,
-};
-
-module_pci_driver(intel_spi_pci_driver);
-
-MODULE_DESCRIPTION("Intel PCH/PCU SPI flash PCI driver");
-MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
-MODULE_LICENSE("GPL v2");
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Intel PCH/PCU SPI flash platform driver.
- *
- * Copyright (C) 2016, Intel Corporation
- * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
- */
-
-#include <linux/ioport.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include "intel-spi.h"
-
-static int intel_spi_platform_probe(struct platform_device *pdev)
-{
- struct intel_spi_boardinfo *info;
- struct intel_spi *ispi;
- struct resource *mem;
-
- info = dev_get_platdata(&pdev->dev);
- if (!info)
- return -EINVAL;
-
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- ispi = intel_spi_probe(&pdev->dev, mem, info);
- if (IS_ERR(ispi))
- return PTR_ERR(ispi);
-
- platform_set_drvdata(pdev, ispi);
- return 0;
-}
-
-static int intel_spi_platform_remove(struct platform_device *pdev)
-{
- struct intel_spi *ispi = platform_get_drvdata(pdev);
-
- return intel_spi_remove(ispi);
-}
-
-static struct platform_driver intel_spi_platform_driver = {
- .probe = intel_spi_platform_probe,
- .remove = intel_spi_platform_remove,
- .driver = {
- .name = "intel-spi",
- },
-};
-
-module_platform_driver(intel_spi_platform_driver);
-
-MODULE_DESCRIPTION("Intel PCH/PCU SPI flash platform driver");
-MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:intel-spi");
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Intel PCH/PCU SPI flash driver.
- *
- * Copyright (C) 2016, Intel Corporation
- * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
- */
-
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/iopoll.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/sizes.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/spi-nor.h>
-#include <linux/platform_data/intel-spi.h>
-
-#include "intel-spi.h"
-
-/* Offsets are from @ispi->base */
-#define BFPREG 0x00
-
-#define HSFSTS_CTL 0x04
-#define HSFSTS_CTL_FSMIE BIT(31)
-#define HSFSTS_CTL_FDBC_SHIFT 24
-#define HSFSTS_CTL_FDBC_MASK (0x3f << HSFSTS_CTL_FDBC_SHIFT)
-
-#define HSFSTS_CTL_FCYCLE_SHIFT 17
-#define HSFSTS_CTL_FCYCLE_MASK (0x0f << HSFSTS_CTL_FCYCLE_SHIFT)
-/* HW sequencer opcodes */
-#define HSFSTS_CTL_FCYCLE_READ (0x00 << HSFSTS_CTL_FCYCLE_SHIFT)
-#define HSFSTS_CTL_FCYCLE_WRITE (0x02 << HSFSTS_CTL_FCYCLE_SHIFT)
-#define HSFSTS_CTL_FCYCLE_ERASE (0x03 << HSFSTS_CTL_FCYCLE_SHIFT)
-#define HSFSTS_CTL_FCYCLE_ERASE_64K (0x04 << HSFSTS_CTL_FCYCLE_SHIFT)
-#define HSFSTS_CTL_FCYCLE_RDID (0x06 << HSFSTS_CTL_FCYCLE_SHIFT)
-#define HSFSTS_CTL_FCYCLE_WRSR (0x07 << HSFSTS_CTL_FCYCLE_SHIFT)
-#define HSFSTS_CTL_FCYCLE_RDSR (0x08 << HSFSTS_CTL_FCYCLE_SHIFT)
-
-#define HSFSTS_CTL_FGO BIT(16)
-#define HSFSTS_CTL_FLOCKDN BIT(15)
-#define HSFSTS_CTL_FDV BIT(14)
-#define HSFSTS_CTL_SCIP BIT(5)
-#define HSFSTS_CTL_AEL BIT(2)
-#define HSFSTS_CTL_FCERR BIT(1)
-#define HSFSTS_CTL_FDONE BIT(0)
-
-#define FADDR 0x08
-#define DLOCK 0x0c
-#define FDATA(n) (0x10 + ((n) * 4))
-
-#define FRACC 0x50
-
-#define FREG(n) (0x54 + ((n) * 4))
-#define FREG_BASE_MASK 0x3fff
-#define FREG_LIMIT_SHIFT 16
-#define FREG_LIMIT_MASK (0x03fff << FREG_LIMIT_SHIFT)
-
-/* Offset is from @ispi->pregs */
-#define PR(n) ((n) * 4)
-#define PR_WPE BIT(31)
-#define PR_LIMIT_SHIFT 16
-#define PR_LIMIT_MASK (0x3fff << PR_LIMIT_SHIFT)
-#define PR_RPE BIT(15)
-#define PR_BASE_MASK 0x3fff
-
-/* Offsets are from @ispi->sregs */
-#define SSFSTS_CTL 0x00
-#define SSFSTS_CTL_FSMIE BIT(23)
-#define SSFSTS_CTL_DS BIT(22)
-#define SSFSTS_CTL_DBC_SHIFT 16
-#define SSFSTS_CTL_SPOP BIT(11)
-#define SSFSTS_CTL_ACS BIT(10)
-#define SSFSTS_CTL_SCGO BIT(9)
-#define SSFSTS_CTL_COP_SHIFT 12
-#define SSFSTS_CTL_FRS BIT(7)
-#define SSFSTS_CTL_DOFRS BIT(6)
-#define SSFSTS_CTL_AEL BIT(4)
-#define SSFSTS_CTL_FCERR BIT(3)
-#define SSFSTS_CTL_FDONE BIT(2)
-#define SSFSTS_CTL_SCIP BIT(0)
-
-#define PREOP_OPTYPE 0x04
-#define OPMENU0 0x08
-#define OPMENU1 0x0c
-
-#define OPTYPE_READ_NO_ADDR 0
-#define OPTYPE_WRITE_NO_ADDR 1
-#define OPTYPE_READ_WITH_ADDR 2
-#define OPTYPE_WRITE_WITH_ADDR 3
-
-/* CPU specifics */
-#define BYT_PR 0x74
-#define BYT_SSFSTS_CTL 0x90
-#define BYT_BCR 0xfc
-#define BYT_BCR_WPD BIT(0)
-#define BYT_FREG_NUM 5
-#define BYT_PR_NUM 5
-
-#define LPT_PR 0x74
-#define LPT_SSFSTS_CTL 0x90
-#define LPT_FREG_NUM 5
-#define LPT_PR_NUM 5
-
-#define BXT_PR 0x84
-#define BXT_SSFSTS_CTL 0xa0
-#define BXT_FREG_NUM 12
-#define BXT_PR_NUM 6
-
-#define CNL_PR 0x84
-#define CNL_FREG_NUM 6
-#define CNL_PR_NUM 5
-
-#define LVSCC 0xc4
-#define UVSCC 0xc8
-#define ERASE_OPCODE_SHIFT 8
-#define ERASE_OPCODE_MASK (0xff << ERASE_OPCODE_SHIFT)
-#define ERASE_64K_OPCODE_SHIFT 16
-#define ERASE_64K_OPCODE_MASK (0xff << ERASE_OPCODE_SHIFT)
-
-#define INTEL_SPI_TIMEOUT 5000 /* ms */
-#define INTEL_SPI_FIFO_SZ 64
-
-/**
- * struct intel_spi - Driver private data
- * @dev: Device pointer
- * @info: Pointer to board specific info
- * @nor: SPI NOR layer structure
- * @base: Beginning of MMIO space
- * @pregs: Start of protection registers
- * @sregs: Start of software sequencer registers
- * @nregions: Maximum number of regions
- * @pr_num: Maximum number of protected range registers
- * @writeable: Is the chip writeable
- * @locked: Is SPI setting locked
- * @swseq_reg: Use SW sequencer in register reads/writes
- * @swseq_erase: Use SW sequencer in erase operation
- * @erase_64k: 64k erase supported
- * @atomic_preopcode: Holds preopcode when atomic sequence is requested
- * @opcodes: Opcodes which are supported. This are programmed by BIOS
- * before it locks down the controller.
- */
-struct intel_spi {
- struct device *dev;
- const struct intel_spi_boardinfo *info;
- struct spi_nor nor;
- void __iomem *base;
- void __iomem *pregs;
- void __iomem *sregs;
- size_t nregions;
- size_t pr_num;
- bool writeable;
- bool locked;
- bool swseq_reg;
- bool swseq_erase;
- bool erase_64k;
- u8 atomic_preopcode;
- u8 opcodes[8];
-};
-
-static bool writeable;
-module_param(writeable, bool, 0);
-MODULE_PARM_DESC(writeable, "Enable write access to SPI flash chip (default=0)");
-
-static void intel_spi_dump_regs(struct intel_spi *ispi)
-{
- u32 value;
- int i;
-
- dev_dbg(ispi->dev, "BFPREG=0x%08x\n", readl(ispi->base + BFPREG));
-
- value = readl(ispi->base + HSFSTS_CTL);
- dev_dbg(ispi->dev, "HSFSTS_CTL=0x%08x\n", value);
- if (value & HSFSTS_CTL_FLOCKDN)
- dev_dbg(ispi->dev, "-> Locked\n");
-
- dev_dbg(ispi->dev, "FADDR=0x%08x\n", readl(ispi->base + FADDR));
- dev_dbg(ispi->dev, "DLOCK=0x%08x\n", readl(ispi->base + DLOCK));
-
- for (i = 0; i < 16; i++)
- dev_dbg(ispi->dev, "FDATA(%d)=0x%08x\n",
- i, readl(ispi->base + FDATA(i)));
-
- dev_dbg(ispi->dev, "FRACC=0x%08x\n", readl(ispi->base + FRACC));
-
- for (i = 0; i < ispi->nregions; i++)
- dev_dbg(ispi->dev, "FREG(%d)=0x%08x\n", i,
- readl(ispi->base + FREG(i)));
- for (i = 0; i < ispi->pr_num; i++)
- dev_dbg(ispi->dev, "PR(%d)=0x%08x\n", i,
- readl(ispi->pregs + PR(i)));
-
- if (ispi->sregs) {
- value = readl(ispi->sregs + SSFSTS_CTL);
- dev_dbg(ispi->dev, "SSFSTS_CTL=0x%08x\n", value);
- dev_dbg(ispi->dev, "PREOP_OPTYPE=0x%08x\n",
- readl(ispi->sregs + PREOP_OPTYPE));
- dev_dbg(ispi->dev, "OPMENU0=0x%08x\n",
- readl(ispi->sregs + OPMENU0));
- dev_dbg(ispi->dev, "OPMENU1=0x%08x\n",
- readl(ispi->sregs + OPMENU1));
- }
-
- if (ispi->info->type == INTEL_SPI_BYT)
- dev_dbg(ispi->dev, "BCR=0x%08x\n", readl(ispi->base + BYT_BCR));
-
- dev_dbg(ispi->dev, "LVSCC=0x%08x\n", readl(ispi->base + LVSCC));
- dev_dbg(ispi->dev, "UVSCC=0x%08x\n", readl(ispi->base + UVSCC));
-
- dev_dbg(ispi->dev, "Protected regions:\n");
- for (i = 0; i < ispi->pr_num; i++) {
- u32 base, limit;
-
- value = readl(ispi->pregs + PR(i));
- if (!(value & (PR_WPE | PR_RPE)))
- continue;
-
- limit = (value & PR_LIMIT_MASK) >> PR_LIMIT_SHIFT;
- base = value & PR_BASE_MASK;
-
- dev_dbg(ispi->dev, " %02d base: 0x%08x limit: 0x%08x [%c%c]\n",
- i, base << 12, (limit << 12) | 0xfff,
- value & PR_WPE ? 'W' : '.',
- value & PR_RPE ? 'R' : '.');
- }
-
- dev_dbg(ispi->dev, "Flash regions:\n");
- for (i = 0; i < ispi->nregions; i++) {
- u32 region, base, limit;
-
- region = readl(ispi->base + FREG(i));
- base = region & FREG_BASE_MASK;
- limit = (region & FREG_LIMIT_MASK) >> FREG_LIMIT_SHIFT;
-
- if (base >= limit || (i > 0 && limit == 0))
- dev_dbg(ispi->dev, " %02d disabled\n", i);
- else
- dev_dbg(ispi->dev, " %02d base: 0x%08x limit: 0x%08x\n",
- i, base << 12, (limit << 12) | 0xfff);
- }
-
- dev_dbg(ispi->dev, "Using %cW sequencer for register access\n",
- ispi->swseq_reg ? 'S' : 'H');
- dev_dbg(ispi->dev, "Using %cW sequencer for erase operation\n",
- ispi->swseq_erase ? 'S' : 'H');
-}
-
-/* Reads max INTEL_SPI_FIFO_SZ bytes from the device fifo */
-static int intel_spi_read_block(struct intel_spi *ispi, void *buf, size_t size)
-{
- size_t bytes;
- int i = 0;
-
- if (size > INTEL_SPI_FIFO_SZ)
- return -EINVAL;
-
- while (size > 0) {
- bytes = min_t(size_t, size, 4);
- memcpy_fromio(buf, ispi->base + FDATA(i), bytes);
- size -= bytes;
- buf += bytes;
- i++;
- }
-
- return 0;
-}
-
-/* Writes max INTEL_SPI_FIFO_SZ bytes to the device fifo */
-static int intel_spi_write_block(struct intel_spi *ispi, const void *buf,
- size_t size)
-{
- size_t bytes;
- int i = 0;
-
- if (size > INTEL_SPI_FIFO_SZ)
- return -EINVAL;
-
- while (size > 0) {
- bytes = min_t(size_t, size, 4);
- memcpy_toio(ispi->base + FDATA(i), buf, bytes);
- size -= bytes;
- buf += bytes;
- i++;
- }
-
- return 0;
-}
-
-static int intel_spi_wait_hw_busy(struct intel_spi *ispi)
-{
- u32 val;
-
- return readl_poll_timeout(ispi->base + HSFSTS_CTL, val,
- !(val & HSFSTS_CTL_SCIP), 40,
- INTEL_SPI_TIMEOUT * 1000);
-}
-
-static int intel_spi_wait_sw_busy(struct intel_spi *ispi)
-{
- u32 val;
-
- return readl_poll_timeout(ispi->sregs + SSFSTS_CTL, val,
- !(val & SSFSTS_CTL_SCIP), 40,
- INTEL_SPI_TIMEOUT * 1000);
-}
-
-static int intel_spi_init(struct intel_spi *ispi)
-{
- u32 opmenu0, opmenu1, lvscc, uvscc, val;
- int i;
-
- switch (ispi->info->type) {
- case INTEL_SPI_BYT:
- ispi->sregs = ispi->base + BYT_SSFSTS_CTL;
- ispi->pregs = ispi->base + BYT_PR;
- ispi->nregions = BYT_FREG_NUM;
- ispi->pr_num = BYT_PR_NUM;
- ispi->swseq_reg = true;
-
- if (writeable) {
- /* Disable write protection */
- val = readl(ispi->base + BYT_BCR);
- if (!(val & BYT_BCR_WPD)) {
- val |= BYT_BCR_WPD;
- writel(val, ispi->base + BYT_BCR);
- val = readl(ispi->base + BYT_BCR);
- }
-
- ispi->writeable = !!(val & BYT_BCR_WPD);
- }
-
- break;
-
- case INTEL_SPI_LPT:
- ispi->sregs = ispi->base + LPT_SSFSTS_CTL;
- ispi->pregs = ispi->base + LPT_PR;
- ispi->nregions = LPT_FREG_NUM;
- ispi->pr_num = LPT_PR_NUM;
- ispi->swseq_reg = true;
- break;
-
- case INTEL_SPI_BXT:
- ispi->sregs = ispi->base + BXT_SSFSTS_CTL;
- ispi->pregs = ispi->base + BXT_PR;
- ispi->nregions = BXT_FREG_NUM;
- ispi->pr_num = BXT_PR_NUM;
- ispi->erase_64k = true;
- break;
-
- case INTEL_SPI_CNL:
- ispi->sregs = NULL;
- ispi->pregs = ispi->base + CNL_PR;
- ispi->nregions = CNL_FREG_NUM;
- ispi->pr_num = CNL_PR_NUM;
- break;
-
- default:
- return -EINVAL;
- }
-
- /* Disable #SMI generation from HW sequencer */
- val = readl(ispi->base + HSFSTS_CTL);
- val &= ~HSFSTS_CTL_FSMIE;
- writel(val, ispi->base + HSFSTS_CTL);
-
- /*
- * Determine whether erase operation should use HW or SW sequencer.
- *
- * The HW sequencer has a predefined list of opcodes, with only the
- * erase opcode being programmable in LVSCC and UVSCC registers.
- * If these registers don't contain a valid erase opcode, erase
- * cannot be done using HW sequencer.
- */
- lvscc = readl(ispi->base + LVSCC);
- uvscc = readl(ispi->base + UVSCC);
- if (!(lvscc & ERASE_OPCODE_MASK) || !(uvscc & ERASE_OPCODE_MASK))
- ispi->swseq_erase = true;
- /* SPI controller on Intel BXT supports 64K erase opcode */
- if (ispi->info->type == INTEL_SPI_BXT && !ispi->swseq_erase)
- if (!(lvscc & ERASE_64K_OPCODE_MASK) ||
- !(uvscc & ERASE_64K_OPCODE_MASK))
- ispi->erase_64k = false;
-
- if (ispi->sregs == NULL && (ispi->swseq_reg || ispi->swseq_erase)) {
- dev_err(ispi->dev, "software sequencer not supported, but required\n");
- return -EINVAL;
- }
-
- /*
- * Some controllers can only do basic operations using hardware
- * sequencer. All other operations are supposed to be carried out
- * using software sequencer.
- */
- if (ispi->swseq_reg) {
- /* Disable #SMI generation from SW sequencer */
- val = readl(ispi->sregs + SSFSTS_CTL);
- val &= ~SSFSTS_CTL_FSMIE;
- writel(val, ispi->sregs + SSFSTS_CTL);
- }
-
- /* Check controller's lock status */
- val = readl(ispi->base + HSFSTS_CTL);
- ispi->locked = !!(val & HSFSTS_CTL_FLOCKDN);
-
- if (ispi->locked && ispi->sregs) {
- /*
- * BIOS programs allowed opcodes and then locks down the
- * register. So read back what opcodes it decided to support.
- * That's the set we are going to support as well.
- */
- opmenu0 = readl(ispi->sregs + OPMENU0);
- opmenu1 = readl(ispi->sregs + OPMENU1);
-
- if (opmenu0 && opmenu1) {
- for (i = 0; i < ARRAY_SIZE(ispi->opcodes) / 2; i++) {
- ispi->opcodes[i] = opmenu0 >> i * 8;
- ispi->opcodes[i + 4] = opmenu1 >> i * 8;
- }
- }
- }
-
- intel_spi_dump_regs(ispi);
-
- return 0;
-}
-
-static int intel_spi_opcode_index(struct intel_spi *ispi, u8 opcode, int optype)
-{
- int i;
- int preop;
-
- if (ispi->locked) {
- for (i = 0; i < ARRAY_SIZE(ispi->opcodes); i++)
- if (ispi->opcodes[i] == opcode)
- return i;
-
- return -EINVAL;
- }
-
- /* The lock is off, so just use index 0 */
- writel(opcode, ispi->sregs + OPMENU0);
- preop = readw(ispi->sregs + PREOP_OPTYPE);
- writel(optype << 16 | preop, ispi->sregs + PREOP_OPTYPE);
-
- return 0;
-}
-
-static int intel_spi_hw_cycle(struct intel_spi *ispi, u8 opcode, size_t len)
-{
- u32 val, status;
- int ret;
-
- val = readl(ispi->base + HSFSTS_CTL);
- val &= ~(HSFSTS_CTL_FCYCLE_MASK | HSFSTS_CTL_FDBC_MASK);
-
- switch (opcode) {
- case SPINOR_OP_RDID:
- val |= HSFSTS_CTL_FCYCLE_RDID;
- break;
- case SPINOR_OP_WRSR:
- val |= HSFSTS_CTL_FCYCLE_WRSR;
- break;
- case SPINOR_OP_RDSR:
- val |= HSFSTS_CTL_FCYCLE_RDSR;
- break;
- default:
- return -EINVAL;
- }
-
- if (len > INTEL_SPI_FIFO_SZ)
- return -EINVAL;
-
- val |= (len - 1) << HSFSTS_CTL_FDBC_SHIFT;
- val |= HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE;
- val |= HSFSTS_CTL_FGO;
- writel(val, ispi->base + HSFSTS_CTL);
-
- ret = intel_spi_wait_hw_busy(ispi);
- if (ret)
- return ret;
-
- status = readl(ispi->base + HSFSTS_CTL);
- if (status & HSFSTS_CTL_FCERR)
- return -EIO;
- else if (status & HSFSTS_CTL_AEL)
- return -EACCES;
-
- return 0;
-}
-
-static int intel_spi_sw_cycle(struct intel_spi *ispi, u8 opcode, size_t len,
- int optype)
-{
- u32 val = 0, status;
- u8 atomic_preopcode;
- int ret;
-
- ret = intel_spi_opcode_index(ispi, opcode, optype);
- if (ret < 0)
- return ret;
-
- if (len > INTEL_SPI_FIFO_SZ)
- return -EINVAL;
-
- /*
- * Always clear it after each SW sequencer operation regardless
- * of whether it is successful or not.
- */
- atomic_preopcode = ispi->atomic_preopcode;
- ispi->atomic_preopcode = 0;
-
- /* Only mark 'Data Cycle' bit when there is data to be transferred */
- if (len > 0)
- val = ((len - 1) << SSFSTS_CTL_DBC_SHIFT) | SSFSTS_CTL_DS;
- val |= ret << SSFSTS_CTL_COP_SHIFT;
- val |= SSFSTS_CTL_FCERR | SSFSTS_CTL_FDONE;
- val |= SSFSTS_CTL_SCGO;
- if (atomic_preopcode) {
- u16 preop;
-
- switch (optype) {
- case OPTYPE_WRITE_NO_ADDR:
- case OPTYPE_WRITE_WITH_ADDR:
- /* Pick matching preopcode for the atomic sequence */
- preop = readw(ispi->sregs + PREOP_OPTYPE);
- if ((preop & 0xff) == atomic_preopcode)
- ; /* Do nothing */
- else if ((preop >> 8) == atomic_preopcode)
- val |= SSFSTS_CTL_SPOP;
- else
- return -EINVAL;
-
- /* Enable atomic sequence */
- val |= SSFSTS_CTL_ACS;
- break;
-
- default:
- return -EINVAL;
- }
-
- }
- writel(val, ispi->sregs + SSFSTS_CTL);
-
- ret = intel_spi_wait_sw_busy(ispi);
- if (ret)
- return ret;
-
- status = readl(ispi->sregs + SSFSTS_CTL);
- if (status & SSFSTS_CTL_FCERR)
- return -EIO;
- else if (status & SSFSTS_CTL_AEL)
- return -EACCES;
-
- return 0;
-}
-
-static int intel_spi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
- size_t len)
-{
- struct intel_spi *ispi = nor->priv;
- int ret;
-
- /* Address of the first chip */
- writel(0, ispi->base + FADDR);
-
- if (ispi->swseq_reg)
- ret = intel_spi_sw_cycle(ispi, opcode, len,
- OPTYPE_READ_NO_ADDR);
- else
- ret = intel_spi_hw_cycle(ispi, opcode, len);
-
- if (ret)
- return ret;
-
- return intel_spi_read_block(ispi, buf, len);
-}
-
-static int intel_spi_write_reg(struct spi_nor *nor, u8 opcode, const u8 *buf,
- size_t len)
-{
- struct intel_spi *ispi = nor->priv;
- int ret;
-
- /*
- * This is handled with atomic operation and preop code in Intel
- * controller so we only verify that it is available. If the
- * controller is not locked, program the opcode to the PREOP
- * register for later use.
- *
- * When hardware sequencer is used there is no need to program
- * any opcodes (it handles them automatically as part of a command).
- */
- if (opcode == SPINOR_OP_WREN) {
- u16 preop;
-
- if (!ispi->swseq_reg)
- return 0;
-
- preop = readw(ispi->sregs + PREOP_OPTYPE);
- if ((preop & 0xff) != opcode && (preop >> 8) != opcode) {
- if (ispi->locked)
- return -EINVAL;
- writel(opcode, ispi->sregs + PREOP_OPTYPE);
- }
-
- /*
- * This enables atomic sequence on next SW sycle. Will
- * be cleared after next operation.
- */
- ispi->atomic_preopcode = opcode;
- return 0;
- }
-
- writel(0, ispi->base + FADDR);
-
- /* Write the value beforehand */
- ret = intel_spi_write_block(ispi, buf, len);
- if (ret)
- return ret;
-
- if (ispi->swseq_reg)
- return intel_spi_sw_cycle(ispi, opcode, len,
- OPTYPE_WRITE_NO_ADDR);
- return intel_spi_hw_cycle(ispi, opcode, len);
-}
-
-static ssize_t intel_spi_read(struct spi_nor *nor, loff_t from, size_t len,
- u_char *read_buf)
-{
- struct intel_spi *ispi = nor->priv;
- size_t block_size, retlen = 0;
- u32 val, status;
- ssize_t ret;
-
- /*
- * Atomic sequence is not expected with HW sequencer reads. Make
- * sure it is cleared regardless.
- */
- if (WARN_ON_ONCE(ispi->atomic_preopcode))
- ispi->atomic_preopcode = 0;
-
- switch (nor->read_opcode) {
- case SPINOR_OP_READ:
- case SPINOR_OP_READ_FAST:
- case SPINOR_OP_READ_4B:
- case SPINOR_OP_READ_FAST_4B:
- break;
- default:
- return -EINVAL;
- }
-
- while (len > 0) {
- block_size = min_t(size_t, len, INTEL_SPI_FIFO_SZ);
-
- /* Read cannot cross 4K boundary */
- block_size = min_t(loff_t, from + block_size,
- round_up(from + 1, SZ_4K)) - from;
-
- writel(from, ispi->base + FADDR);
-
- val = readl(ispi->base + HSFSTS_CTL);
- val &= ~(HSFSTS_CTL_FDBC_MASK | HSFSTS_CTL_FCYCLE_MASK);
- val |= HSFSTS_CTL_AEL | HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE;
- val |= (block_size - 1) << HSFSTS_CTL_FDBC_SHIFT;
- val |= HSFSTS_CTL_FCYCLE_READ;
- val |= HSFSTS_CTL_FGO;
- writel(val, ispi->base + HSFSTS_CTL);
-
- ret = intel_spi_wait_hw_busy(ispi);
- if (ret)
- return ret;
-
- status = readl(ispi->base + HSFSTS_CTL);
- if (status & HSFSTS_CTL_FCERR)
- ret = -EIO;
- else if (status & HSFSTS_CTL_AEL)
- ret = -EACCES;
-
- if (ret < 0) {
- dev_err(ispi->dev, "read error: %llx: %#x\n", from,
- status);
- return ret;
- }
-
- ret = intel_spi_read_block(ispi, read_buf, block_size);
- if (ret)
- return ret;
-
- len -= block_size;
- from += block_size;
- retlen += block_size;
- read_buf += block_size;
- }
-
- return retlen;
-}
-
-static ssize_t intel_spi_write(struct spi_nor *nor, loff_t to, size_t len,
- const u_char *write_buf)
-{
- struct intel_spi *ispi = nor->priv;
- size_t block_size, retlen = 0;
- u32 val, status;
- ssize_t ret;
-
- /* Not needed with HW sequencer write, make sure it is cleared */
- ispi->atomic_preopcode = 0;
-
- while (len > 0) {
- block_size = min_t(size_t, len, INTEL_SPI_FIFO_SZ);
-
- /* Write cannot cross 4K boundary */
- block_size = min_t(loff_t, to + block_size,
- round_up(to + 1, SZ_4K)) - to;
-
- writel(to, ispi->base + FADDR);
-
- val = readl(ispi->base + HSFSTS_CTL);
- val &= ~(HSFSTS_CTL_FDBC_MASK | HSFSTS_CTL_FCYCLE_MASK);
- val |= HSFSTS_CTL_AEL | HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE;
- val |= (block_size - 1) << HSFSTS_CTL_FDBC_SHIFT;
- val |= HSFSTS_CTL_FCYCLE_WRITE;
-
- ret = intel_spi_write_block(ispi, write_buf, block_size);
- if (ret) {
- dev_err(ispi->dev, "failed to write block\n");
- return ret;
- }
-
- /* Start the write now */
- val |= HSFSTS_CTL_FGO;
- writel(val, ispi->base + HSFSTS_CTL);
-
- ret = intel_spi_wait_hw_busy(ispi);
- if (ret) {
- dev_err(ispi->dev, "timeout\n");
- return ret;
- }
-
- status = readl(ispi->base + HSFSTS_CTL);
- if (status & HSFSTS_CTL_FCERR)
- ret = -EIO;
- else if (status & HSFSTS_CTL_AEL)
- ret = -EACCES;
-
- if (ret < 0) {
- dev_err(ispi->dev, "write error: %llx: %#x\n", to,
- status);
- return ret;
- }
-
- len -= block_size;
- to += block_size;
- retlen += block_size;
- write_buf += block_size;
- }
-
- return retlen;
-}
-
-static int intel_spi_erase(struct spi_nor *nor, loff_t offs)
-{
- size_t erase_size, len = nor->mtd.erasesize;
- struct intel_spi *ispi = nor->priv;
- u32 val, status, cmd;
- int ret;
-
- /* If the hardware can do 64k erase use that when possible */
- if (len >= SZ_64K && ispi->erase_64k) {
- cmd = HSFSTS_CTL_FCYCLE_ERASE_64K;
- erase_size = SZ_64K;
- } else {
- cmd = HSFSTS_CTL_FCYCLE_ERASE;
- erase_size = SZ_4K;
- }
-
- if (ispi->swseq_erase) {
- while (len > 0) {
- writel(offs, ispi->base + FADDR);
-
- ret = intel_spi_sw_cycle(ispi, nor->erase_opcode,
- 0, OPTYPE_WRITE_WITH_ADDR);
- if (ret)
- return ret;
-
- offs += erase_size;
- len -= erase_size;
- }
-
- return 0;
- }
-
- /* Not needed with HW sequencer erase, make sure it is cleared */
- ispi->atomic_preopcode = 0;
-
- while (len > 0) {
- writel(offs, ispi->base + FADDR);
-
- val = readl(ispi->base + HSFSTS_CTL);
- val &= ~(HSFSTS_CTL_FDBC_MASK | HSFSTS_CTL_FCYCLE_MASK);
- val |= HSFSTS_CTL_AEL | HSFSTS_CTL_FCERR | HSFSTS_CTL_FDONE;
- val |= cmd;
- val |= HSFSTS_CTL_FGO;
- writel(val, ispi->base + HSFSTS_CTL);
-
- ret = intel_spi_wait_hw_busy(ispi);
- if (ret)
- return ret;
-
- status = readl(ispi->base + HSFSTS_CTL);
- if (status & HSFSTS_CTL_FCERR)
- return -EIO;
- else if (status & HSFSTS_CTL_AEL)
- return -EACCES;
-
- offs += erase_size;
- len -= erase_size;
- }
-
- return 0;
-}
-
-static bool intel_spi_is_protected(const struct intel_spi *ispi,
- unsigned int base, unsigned int limit)
-{
- int i;
-
- for (i = 0; i < ispi->pr_num; i++) {
- u32 pr_base, pr_limit, pr_value;
-
- pr_value = readl(ispi->pregs + PR(i));
- if (!(pr_value & (PR_WPE | PR_RPE)))
- continue;
-
- pr_limit = (pr_value & PR_LIMIT_MASK) >> PR_LIMIT_SHIFT;
- pr_base = pr_value & PR_BASE_MASK;
-
- if (pr_base >= base && pr_limit <= limit)
- return true;
- }
-
- return false;
-}
-
-/*
- * There will be a single partition holding all enabled flash regions. We
- * call this "BIOS".
- */
-static void intel_spi_fill_partition(struct intel_spi *ispi,
- struct mtd_partition *part)
-{
- u64 end;
- int i;
-
- memset(part, 0, sizeof(*part));
-
- /* Start from the mandatory descriptor region */
- part->size = 4096;
- part->name = "BIOS";
-
- /*
- * Now try to find where this partition ends based on the flash
- * region registers.
- */
- for (i = 1; i < ispi->nregions; i++) {
- u32 region, base, limit;
-
- region = readl(ispi->base + FREG(i));
- base = region & FREG_BASE_MASK;
- limit = (region & FREG_LIMIT_MASK) >> FREG_LIMIT_SHIFT;
-
- if (base >= limit || limit == 0)
- continue;
-
- /*
- * If any of the regions have protection bits set, make the
- * whole partition read-only to be on the safe side.
- */
- if (intel_spi_is_protected(ispi, base, limit))
- ispi->writeable = false;
-
- end = (limit << 12) + 4096;
- if (end > part->size)
- part->size = end;
- }
-}
-
-static const struct spi_nor_controller_ops intel_spi_controller_ops = {
- .read_reg = intel_spi_read_reg,
- .write_reg = intel_spi_write_reg,
- .read = intel_spi_read,
- .write = intel_spi_write,
- .erase = intel_spi_erase,
-};
-
-struct intel_spi *intel_spi_probe(struct device *dev,
- struct resource *mem, const struct intel_spi_boardinfo *info)
-{
- const struct spi_nor_hwcaps hwcaps = {
- .mask = SNOR_HWCAPS_READ |
- SNOR_HWCAPS_READ_FAST |
- SNOR_HWCAPS_PP,
- };
- struct mtd_partition part;
- struct intel_spi *ispi;
- int ret;
-
- if (!info || !mem)
- return ERR_PTR(-EINVAL);
-
- ispi = devm_kzalloc(dev, sizeof(*ispi), GFP_KERNEL);
- if (!ispi)
- return ERR_PTR(-ENOMEM);
-
- ispi->base = devm_ioremap_resource(dev, mem);
- if (IS_ERR(ispi->base))
- return ERR_CAST(ispi->base);
-
- ispi->dev = dev;
- ispi->info = info;
- ispi->writeable = info->writeable;
-
- ret = intel_spi_init(ispi);
- if (ret)
- return ERR_PTR(ret);
-
- ispi->nor.dev = ispi->dev;
- ispi->nor.priv = ispi;
- ispi->nor.controller_ops = &intel_spi_controller_ops;
-
- ret = spi_nor_scan(&ispi->nor, NULL, &hwcaps);
- if (ret) {
- dev_info(dev, "failed to locate the chip\n");
- return ERR_PTR(ret);
- }
-
- intel_spi_fill_partition(ispi, &part);
-
- /* Prevent writes if not explicitly enabled */
- if (!ispi->writeable || !writeable)
- ispi->nor.mtd.flags &= ~MTD_WRITEABLE;
-
- ret = mtd_device_register(&ispi->nor.mtd, &part, 1);
- if (ret)
- return ERR_PTR(ret);
-
- return ispi;
-}
-EXPORT_SYMBOL_GPL(intel_spi_probe);
-
-int intel_spi_remove(struct intel_spi *ispi)
-{
- return mtd_device_unregister(&ispi->nor.mtd);
-}
-EXPORT_SYMBOL_GPL(intel_spi_remove);
-
-MODULE_DESCRIPTION("Intel PCH/PCU SPI flash core driver");
-MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
-MODULE_LICENSE("GPL v2");
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Intel PCH/PCU SPI flash driver.
- *
- * Copyright (C) 2016, Intel Corporation
- * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
- */
-
-#ifndef INTEL_SPI_H
-#define INTEL_SPI_H
-
-#include <linux/platform_data/intel-spi.h>
-
-struct intel_spi;
-struct resource;
-
-struct intel_spi *intel_spi_probe(struct device *dev,
- struct resource *mem, const struct intel_spi_boardinfo *info);
-int intel_spi_remove(struct intel_spi *ispi);
-
-#endif /* INTEL_SPI_H */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info intel_parts[] = {
+ /* Intel/Numonyx -- xxxs33b */
+ { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) },
+ { "320s33b", INFO(0x898912, 0, 64 * 1024, 64, 0) },
+ { "640s33b", INFO(0x898913, 0, 64 * 1024, 128, 0) },
+};
+
+static void intel_default_init(struct spi_nor *nor)
+{
+ nor->flags |= SNOR_F_HAS_LOCK;
+}
+
+static const struct spi_nor_fixups intel_fixups = {
+ .default_init = intel_default_init,
+};
+
+const struct spi_nor_manufacturer spi_nor_intel = {
+ .name = "intel",
+ .parts = intel_parts,
+ .nparts = ARRAY_SIZE(intel_parts),
+ .fixups = &intel_fixups,
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static int
+is25lp256_post_bfpt_fixups(struct spi_nor *nor,
+ const struct sfdp_parameter_header *bfpt_header,
+ const struct sfdp_bfpt *bfpt,
+ struct spi_nor_flash_parameter *params)
+{
+ /*
+ * IS25LP256 supports 4B opcodes, but the BFPT advertises a
+ * BFPT_DWORD1_ADDRESS_BYTES_3_ONLY address width.
+ * Overwrite the address width advertised by the BFPT.
+ */
+ if ((bfpt->dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) ==
+ BFPT_DWORD1_ADDRESS_BYTES_3_ONLY)
+ nor->addr_width = 4;
+
+ return 0;
+}
+
+static struct spi_nor_fixups is25lp256_fixups = {
+ .post_bfpt = is25lp256_post_bfpt_fixups,
+};
+
+static const struct flash_info issi_parts[] = {
+ /* ISSI */
+ { "is25cd512", INFO(0x7f9d20, 0, 32 * 1024, 2, SECT_4K) },
+ { "is25lq040b", INFO(0x9d4013, 0, 64 * 1024, 8,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25lp016d", INFO(0x9d6015, 0, 64 * 1024, 32,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25lp080d", INFO(0x9d6014, 0, 64 * 1024, 16,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25lp032", INFO(0x9d6016, 0, 64 * 1024, 64,
+ SECT_4K | SPI_NOR_DUAL_READ) },
+ { "is25lp064", INFO(0x9d6017, 0, 64 * 1024, 128,
+ SECT_4K | SPI_NOR_DUAL_READ) },
+ { "is25lp128", INFO(0x9d6018, 0, 64 * 1024, 256,
+ SECT_4K | SPI_NOR_DUAL_READ) },
+ { "is25lp256", INFO(0x9d6019, 0, 64 * 1024, 512,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_4B_OPCODES)
+ .fixups = &is25lp256_fixups },
+ { "is25wp032", INFO(0x9d7016, 0, 64 * 1024, 64,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25wp064", INFO(0x9d7017, 0, 64 * 1024, 128,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25wp128", INFO(0x9d7018, 0, 64 * 1024, 256,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "is25wp256", INFO(0x9d7019, 0, 64 * 1024, 512,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_4B_OPCODES)
+ .fixups = &is25lp256_fixups },
+
+ /* PMC */
+ { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
+ { "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) },
+ { "pm25lq032", INFO(0x7f9d46, 0, 64 * 1024, 64, SECT_4K) },
+};
+
+static void issi_default_init(struct spi_nor *nor)
+{
+ nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
+}
+
+static const struct spi_nor_fixups issi_fixups = {
+ .default_init = issi_default_init,
+};
+
+const struct spi_nor_manufacturer spi_nor_issi = {
+ .name = "issi",
+ .parts = issi_parts,
+ .nparts = ARRAY_SIZE(issi_parts),
+ .fixups = &issi_fixups,
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static int
+mx25l25635_post_bfpt_fixups(struct spi_nor *nor,
+ const struct sfdp_parameter_header *bfpt_header,
+ const struct sfdp_bfpt *bfpt,
+ struct spi_nor_flash_parameter *params)
+{
+ /*
+ * MX25L25635F supports 4B opcodes but MX25L25635E does not.
+ * Unfortunately, Macronix has re-used the same JEDEC ID for both
+ * variants which prevents us from defining a new entry in the parts
+ * table.
+ * We need a way to differentiate MX25L25635E and MX25L25635F, and it
+ * seems that the F version advertises support for Fast Read 4-4-4 in
+ * its BFPT table.
+ */
+ if (bfpt->dwords[BFPT_DWORD(5)] & BFPT_DWORD5_FAST_READ_4_4_4)
+ nor->flags |= SNOR_F_4B_OPCODES;
+
+ return 0;
+}
+
+static struct spi_nor_fixups mx25l25635_fixups = {
+ .post_bfpt = mx25l25635_post_bfpt_fixups,
+};
+
+static const struct flash_info macronix_parts[] = {
+ /* Macronix */
+ { "mx25l512e", INFO(0xc22010, 0, 64 * 1024, 1, SECT_4K) },
+ { "mx25l2005a", INFO(0xc22012, 0, 64 * 1024, 4, SECT_4K) },
+ { "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) },
+ { "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) },
+ { "mx25l1606e", INFO(0xc22015, 0, 64 * 1024, 32, SECT_4K) },
+ { "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, SECT_4K) },
+ { "mx25l3255e", INFO(0xc29e16, 0, 64 * 1024, 64, SECT_4K) },
+ { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) },
+ { "mx25u2033e", INFO(0xc22532, 0, 64 * 1024, 4, SECT_4K) },
+ { "mx25u3235f", INFO(0xc22536, 0, 64 * 1024, 64,
+ SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "mx25u4035", INFO(0xc22533, 0, 64 * 1024, 8, SECT_4K) },
+ { "mx25u8035", INFO(0xc22534, 0, 64 * 1024, 16, SECT_4K) },
+ { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
+ { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
+ { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
+ { "mx25r3235f", INFO(0xc22816, 0, 64 * 1024, 64,
+ SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256,
+ SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
+ .fixups = &mx25l25635_fixups },
+ { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512,
+ SECT_4K | SPI_NOR_4B_OPCODES) },
+ { "mx25v8035f", INFO(0xc22314, 0, 64 * 1024, 16,
+ SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
+ { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_4B_OPCODES) },
+ { "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024,
+ SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+ { "mx66l1g45g", INFO(0xc2201b, 0, 64 * 1024, 2048,
+ SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048,
+ SPI_NOR_QUAD_READ) },
+};
+
+static void macronix_default_init(struct spi_nor *nor)
+{
+ nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
+ nor->params->set_4byte_addr_mode = spi_nor_set_4byte_addr_mode;
+}
+
+static const struct spi_nor_fixups macronix_fixups = {
+ .default_init = macronix_default_init,
+};
+
+const struct spi_nor_manufacturer spi_nor_macronix = {
+ .name = "macronix",
+ .parts = macronix_parts,
+ .nparts = ARRAY_SIZE(macronix_parts),
+ .fixups = ¯onix_fixups,
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info micron_parts[] = {
+ { "mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512,
+ SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
+ SPI_NOR_4B_OPCODES) },
+ { "mt35xu02g", INFO(0x2c5b1c, 0, 128 * 1024, 2048,
+ SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
+ SPI_NOR_4B_OPCODES) },
+};
+
+static const struct flash_info st_parts[] = {
+ { "n25q016a", INFO(0x20bb15, 0, 64 * 1024, 32,
+ SECT_4K | SPI_NOR_QUAD_READ) },
+ { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64,
+ SPI_NOR_QUAD_READ) },
+ { "n25q032a", INFO(0x20bb16, 0, 64 * 1024, 64,
+ SPI_NOR_QUAD_READ) },
+ { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128,
+ SECT_4K | SPI_NOR_QUAD_READ) },
+ { "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128,
+ SECT_4K | SPI_NOR_QUAD_READ) },
+ { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256,
+ SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
+ { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256,
+ SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
+ { "mt25ql256a", INFO6(0x20ba19, 0x104400, 64 * 1024, 512,
+ SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+ { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K |
+ USE_FSR | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "mt25qu256a", INFO6(0x20bb19, 0x104400, 64 * 1024, 512,
+ SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+ { "n25q256ax1", INFO(0x20bb19, 0, 64 * 1024, 512,
+ SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
+ { "mt25ql512a", INFO6(0x20ba20, 0x104400, 64 * 1024, 1024,
+ SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+ { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024,
+ SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+ SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
+ { "mt25qu512a", INFO6(0x20bb20, 0x104400, 64 * 1024, 1024,
+ SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
+ { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024,
+ SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
+ SPI_NOR_4BIT_BP | SPI_NOR_BP3_SR_BIT6) },
+ { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048,
+ SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
+ NO_CHIP_ERASE) },
+ { "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048,
+ SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
+ NO_CHIP_ERASE) },
+ { "mt25ql02g", INFO(0x20ba22, 0, 64 * 1024, 4096,
+ SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
+ NO_CHIP_ERASE) },
+ { "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096,
+ SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
+ NO_CHIP_ERASE) },
+
+ { "m25p05", INFO(0x202010, 0, 32 * 1024, 2, 0) },
+ { "m25p10", INFO(0x202011, 0, 32 * 1024, 4, 0) },
+ { "m25p20", INFO(0x202012, 0, 64 * 1024, 4, 0) },
+ { "m25p40", INFO(0x202013, 0, 64 * 1024, 8, 0) },
+ { "m25p80", INFO(0x202014, 0, 64 * 1024, 16, 0) },
+ { "m25p16", INFO(0x202015, 0, 64 * 1024, 32, 0) },
+ { "m25p32", INFO(0x202016, 0, 64 * 1024, 64, 0) },
+ { "m25p64", INFO(0x202017, 0, 64 * 1024, 128, 0) },
+ { "m25p128", INFO(0x202018, 0, 256 * 1024, 64, 0) },
+
+ { "m25p05-nonjedec", INFO(0, 0, 32 * 1024, 2, 0) },
+ { "m25p10-nonjedec", INFO(0, 0, 32 * 1024, 4, 0) },
+ { "m25p20-nonjedec", INFO(0, 0, 64 * 1024, 4, 0) },
+ { "m25p40-nonjedec", INFO(0, 0, 64 * 1024, 8, 0) },
+ { "m25p80-nonjedec", INFO(0, 0, 64 * 1024, 16, 0) },
+ { "m25p16-nonjedec", INFO(0, 0, 64 * 1024, 32, 0) },
+ { "m25p32-nonjedec", INFO(0, 0, 64 * 1024, 64, 0) },
+ { "m25p64-nonjedec", INFO(0, 0, 64 * 1024, 128, 0) },
+ { "m25p128-nonjedec", INFO(0, 0, 256 * 1024, 64, 0) },
+
+ { "m45pe10", INFO(0x204011, 0, 64 * 1024, 2, 0) },
+ { "m45pe80", INFO(0x204014, 0, 64 * 1024, 16, 0) },
+ { "m45pe16", INFO(0x204015, 0, 64 * 1024, 32, 0) },
+
+ { "m25pe20", INFO(0x208012, 0, 64 * 1024, 4, 0) },
+ { "m25pe80", INFO(0x208014, 0, 64 * 1024, 16, 0) },
+ { "m25pe16", INFO(0x208015, 0, 64 * 1024, 32, SECT_4K) },
+
+ { "m25px16", INFO(0x207115, 0, 64 * 1024, 32, SECT_4K) },
+ { "m25px32", INFO(0x207116, 0, 64 * 1024, 64, SECT_4K) },
+ { "m25px32-s0", INFO(0x207316, 0, 64 * 1024, 64, SECT_4K) },
+ { "m25px32-s1", INFO(0x206316, 0, 64 * 1024, 64, SECT_4K) },
+ { "m25px64", INFO(0x207117, 0, 64 * 1024, 128, 0) },
+ { "m25px80", INFO(0x207114, 0, 64 * 1024, 16, 0) },
+};
+
+/**
+ * st_micron_set_4byte_addr_mode() - Set 4-byte address mode for ST and Micron
+ * flashes.
+ * @nor: pointer to 'struct spi_nor'.
+ * @enable: true to enter the 4-byte address mode, false to exit the 4-byte
+ * address mode.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int st_micron_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
+{
+ int ret;
+
+ ret = spi_nor_write_enable(nor);
+ if (ret)
+ return ret;
+
+ ret = spi_nor_set_4byte_addr_mode(nor, enable);
+ if (ret)
+ return ret;
+
+ return spi_nor_write_disable(nor);
+}
+
+static void micron_st_default_init(struct spi_nor *nor)
+{
+ nor->flags |= SNOR_F_HAS_LOCK;
+ nor->flags &= ~SNOR_F_HAS_16BIT_SR;
+ nor->params->quad_enable = NULL;
+ nor->params->set_4byte_addr_mode = st_micron_set_4byte_addr_mode;
+}
+
+static const struct spi_nor_fixups micron_st_fixups = {
+ .default_init = micron_st_default_init,
+};
+
+const struct spi_nor_manufacturer spi_nor_micron = {
+ .name = "micron",
+ .parts = micron_parts,
+ .nparts = ARRAY_SIZE(micron_parts),
+ .fixups = µn_st_fixups,
+};
+
+const struct spi_nor_manufacturer spi_nor_st = {
+ .name = "st",
+ .parts = st_parts,
+ .nparts = ARRAY_SIZE(st_parts),
+ .fixups = µn_st_fixups,
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2015 MediaTek Inc.
- * Author: Bayi Cheng <bayi.cheng@mediatek.com>
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/iopoll.h>
-#include <linux/ioport.h>
-#include <linux/math64.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/spi-nor.h>
-
-#define MTK_NOR_CMD_REG 0x00
-#define MTK_NOR_CNT_REG 0x04
-#define MTK_NOR_RDSR_REG 0x08
-#define MTK_NOR_RDATA_REG 0x0c
-#define MTK_NOR_RADR0_REG 0x10
-#define MTK_NOR_RADR1_REG 0x14
-#define MTK_NOR_RADR2_REG 0x18
-#define MTK_NOR_WDATA_REG 0x1c
-#define MTK_NOR_PRGDATA0_REG 0x20
-#define MTK_NOR_PRGDATA1_REG 0x24
-#define MTK_NOR_PRGDATA2_REG 0x28
-#define MTK_NOR_PRGDATA3_REG 0x2c
-#define MTK_NOR_PRGDATA4_REG 0x30
-#define MTK_NOR_PRGDATA5_REG 0x34
-#define MTK_NOR_SHREG0_REG 0x38
-#define MTK_NOR_SHREG1_REG 0x3c
-#define MTK_NOR_SHREG2_REG 0x40
-#define MTK_NOR_SHREG3_REG 0x44
-#define MTK_NOR_SHREG4_REG 0x48
-#define MTK_NOR_SHREG5_REG 0x4c
-#define MTK_NOR_SHREG6_REG 0x50
-#define MTK_NOR_SHREG7_REG 0x54
-#define MTK_NOR_SHREG8_REG 0x58
-#define MTK_NOR_SHREG9_REG 0x5c
-#define MTK_NOR_CFG1_REG 0x60
-#define MTK_NOR_CFG2_REG 0x64
-#define MTK_NOR_CFG3_REG 0x68
-#define MTK_NOR_STATUS0_REG 0x70
-#define MTK_NOR_STATUS1_REG 0x74
-#define MTK_NOR_STATUS2_REG 0x78
-#define MTK_NOR_STATUS3_REG 0x7c
-#define MTK_NOR_FLHCFG_REG 0x84
-#define MTK_NOR_TIME_REG 0x94
-#define MTK_NOR_PP_DATA_REG 0x98
-#define MTK_NOR_PREBUF_STUS_REG 0x9c
-#define MTK_NOR_DELSEL0_REG 0xa0
-#define MTK_NOR_DELSEL1_REG 0xa4
-#define MTK_NOR_INTRSTUS_REG 0xa8
-#define MTK_NOR_INTREN_REG 0xac
-#define MTK_NOR_CHKSUM_CTL_REG 0xb8
-#define MTK_NOR_CHKSUM_REG 0xbc
-#define MTK_NOR_CMD2_REG 0xc0
-#define MTK_NOR_WRPROT_REG 0xc4
-#define MTK_NOR_RADR3_REG 0xc8
-#define MTK_NOR_DUAL_REG 0xcc
-#define MTK_NOR_DELSEL2_REG 0xd0
-#define MTK_NOR_DELSEL3_REG 0xd4
-#define MTK_NOR_DELSEL4_REG 0xd8
-
-/* commands for mtk nor controller */
-#define MTK_NOR_READ_CMD 0x0
-#define MTK_NOR_RDSR_CMD 0x2
-#define MTK_NOR_PRG_CMD 0x4
-#define MTK_NOR_WR_CMD 0x10
-#define MTK_NOR_PIO_WR_CMD 0x90
-#define MTK_NOR_WRSR_CMD 0x20
-#define MTK_NOR_PIO_READ_CMD 0x81
-#define MTK_NOR_WR_BUF_ENABLE 0x1
-#define MTK_NOR_WR_BUF_DISABLE 0x0
-#define MTK_NOR_ENABLE_SF_CMD 0x30
-#define MTK_NOR_DUAD_ADDR_EN 0x8
-#define MTK_NOR_QUAD_READ_EN 0x4
-#define MTK_NOR_DUAL_ADDR_EN 0x2
-#define MTK_NOR_DUAL_READ_EN 0x1
-#define MTK_NOR_DUAL_DISABLE 0x0
-#define MTK_NOR_FAST_READ 0x1
-
-#define SFLASH_WRBUF_SIZE 128
-
-/* Can shift up to 48 bits (6 bytes) of TX/RX */
-#define MTK_NOR_MAX_RX_TX_SHIFT 6
-/* can shift up to 56 bits (7 bytes) transfer by MTK_NOR_PRG_CMD */
-#define MTK_NOR_MAX_SHIFT 7
-/* nor controller 4-byte address mode enable bit */
-#define MTK_NOR_4B_ADDR_EN BIT(4)
-
-/* Helpers for accessing the program data / shift data registers */
-#define MTK_NOR_PRG_REG(n) (MTK_NOR_PRGDATA0_REG + 4 * (n))
-#define MTK_NOR_SHREG(n) (MTK_NOR_SHREG0_REG + 4 * (n))
-
-struct mtk_nor {
- struct spi_nor nor;
- struct device *dev;
- void __iomem *base; /* nor flash base address */
- struct clk *spi_clk;
- struct clk *nor_clk;
-};
-
-static void mtk_nor_set_read_mode(struct mtk_nor *mtk_nor)
-{
- struct spi_nor *nor = &mtk_nor->nor;
-
- switch (nor->read_proto) {
- case SNOR_PROTO_1_1_1:
- writeb(nor->read_opcode, mtk_nor->base +
- MTK_NOR_PRGDATA3_REG);
- writeb(MTK_NOR_FAST_READ, mtk_nor->base +
- MTK_NOR_CFG1_REG);
- break;
- case SNOR_PROTO_1_1_2:
- writeb(nor->read_opcode, mtk_nor->base +
- MTK_NOR_PRGDATA3_REG);
- writeb(MTK_NOR_DUAL_READ_EN, mtk_nor->base +
- MTK_NOR_DUAL_REG);
- break;
- case SNOR_PROTO_1_1_4:
- writeb(nor->read_opcode, mtk_nor->base +
- MTK_NOR_PRGDATA4_REG);
- writeb(MTK_NOR_QUAD_READ_EN, mtk_nor->base +
- MTK_NOR_DUAL_REG);
- break;
- default:
- writeb(MTK_NOR_DUAL_DISABLE, mtk_nor->base +
- MTK_NOR_DUAL_REG);
- break;
- }
-}
-
-static int mtk_nor_execute_cmd(struct mtk_nor *mtk_nor, u8 cmdval)
-{
- int reg;
- u8 val = cmdval & 0x1f;
-
- writeb(cmdval, mtk_nor->base + MTK_NOR_CMD_REG);
- return readl_poll_timeout(mtk_nor->base + MTK_NOR_CMD_REG, reg,
- !(reg & val), 100, 10000);
-}
-
-static int mtk_nor_do_tx_rx(struct mtk_nor *mtk_nor, u8 op,
- const u8 *tx, size_t txlen, u8 *rx, size_t rxlen)
-{
- size_t len = 1 + txlen + rxlen;
- int i, ret, idx;
-
- if (len > MTK_NOR_MAX_SHIFT)
- return -EINVAL;
-
- writeb(len * 8, mtk_nor->base + MTK_NOR_CNT_REG);
-
- /* start at PRGDATA5, go down to PRGDATA0 */
- idx = MTK_NOR_MAX_RX_TX_SHIFT - 1;
-
- /* opcode */
- writeb(op, mtk_nor->base + MTK_NOR_PRG_REG(idx));
- idx--;
-
- /* program TX data */
- for (i = 0; i < txlen; i++, idx--)
- writeb(tx[i], mtk_nor->base + MTK_NOR_PRG_REG(idx));
-
- /* clear out rest of TX registers */
- while (idx >= 0) {
- writeb(0, mtk_nor->base + MTK_NOR_PRG_REG(idx));
- idx--;
- }
-
- ret = mtk_nor_execute_cmd(mtk_nor, MTK_NOR_PRG_CMD);
- if (ret)
- return ret;
-
- /* restart at first RX byte */
- idx = rxlen - 1;
-
- /* read out RX data */
- for (i = 0; i < rxlen; i++, idx--)
- rx[i] = readb(mtk_nor->base + MTK_NOR_SHREG(idx));
-
- return 0;
-}
-
-/* Do a WRSR (Write Status Register) command */
-static int mtk_nor_wr_sr(struct mtk_nor *mtk_nor, const u8 sr)
-{
- writeb(sr, mtk_nor->base + MTK_NOR_PRGDATA5_REG);
- writeb(8, mtk_nor->base + MTK_NOR_CNT_REG);
- return mtk_nor_execute_cmd(mtk_nor, MTK_NOR_WRSR_CMD);
-}
-
-static int mtk_nor_write_buffer_enable(struct mtk_nor *mtk_nor)
-{
- u8 reg;
-
- /* the bit0 of MTK_NOR_CFG2_REG is pre-fetch buffer
- * 0: pre-fetch buffer use for read
- * 1: pre-fetch buffer use for page program
- */
- writel(MTK_NOR_WR_BUF_ENABLE, mtk_nor->base + MTK_NOR_CFG2_REG);
- return readb_poll_timeout(mtk_nor->base + MTK_NOR_CFG2_REG, reg,
- 0x01 == (reg & 0x01), 100, 10000);
-}
-
-static int mtk_nor_write_buffer_disable(struct mtk_nor *mtk_nor)
-{
- u8 reg;
-
- writel(MTK_NOR_WR_BUF_DISABLE, mtk_nor->base + MTK_NOR_CFG2_REG);
- return readb_poll_timeout(mtk_nor->base + MTK_NOR_CFG2_REG, reg,
- MTK_NOR_WR_BUF_DISABLE == (reg & 0x1), 100,
- 10000);
-}
-
-static void mtk_nor_set_addr_width(struct mtk_nor *mtk_nor)
-{
- u8 val;
- struct spi_nor *nor = &mtk_nor->nor;
-
- val = readb(mtk_nor->base + MTK_NOR_DUAL_REG);
-
- switch (nor->addr_width) {
- case 3:
- val &= ~MTK_NOR_4B_ADDR_EN;
- break;
- case 4:
- val |= MTK_NOR_4B_ADDR_EN;
- break;
- default:
- dev_warn(mtk_nor->dev, "Unexpected address width %u.\n",
- nor->addr_width);
- break;
- }
-
- writeb(val, mtk_nor->base + MTK_NOR_DUAL_REG);
-}
-
-static void mtk_nor_set_addr(struct mtk_nor *mtk_nor, u32 addr)
-{
- int i;
-
- mtk_nor_set_addr_width(mtk_nor);
-
- for (i = 0; i < 3; i++) {
- writeb(addr & 0xff, mtk_nor->base + MTK_NOR_RADR0_REG + i * 4);
- addr >>= 8;
- }
- /* Last register is non-contiguous */
- writeb(addr & 0xff, mtk_nor->base + MTK_NOR_RADR3_REG);
-}
-
-static ssize_t mtk_nor_read(struct spi_nor *nor, loff_t from, size_t length,
- u_char *buffer)
-{
- int i, ret;
- int addr = (int)from;
- u8 *buf = (u8 *)buffer;
- struct mtk_nor *mtk_nor = nor->priv;
-
- /* set mode for fast read mode ,dual mode or quad mode */
- mtk_nor_set_read_mode(mtk_nor);
- mtk_nor_set_addr(mtk_nor, addr);
-
- for (i = 0; i < length; i++) {
- ret = mtk_nor_execute_cmd(mtk_nor, MTK_NOR_PIO_READ_CMD);
- if (ret < 0)
- return ret;
- buf[i] = readb(mtk_nor->base + MTK_NOR_RDATA_REG);
- }
- return length;
-}
-
-static int mtk_nor_write_single_byte(struct mtk_nor *mtk_nor,
- int addr, int length, u8 *data)
-{
- int i, ret;
-
- mtk_nor_set_addr(mtk_nor, addr);
-
- for (i = 0; i < length; i++) {
- writeb(*data++, mtk_nor->base + MTK_NOR_WDATA_REG);
- ret = mtk_nor_execute_cmd(mtk_nor, MTK_NOR_PIO_WR_CMD);
- if (ret < 0)
- return ret;
- }
- return 0;
-}
-
-static int mtk_nor_write_buffer(struct mtk_nor *mtk_nor, int addr,
- const u8 *buf)
-{
- int i, bufidx, data;
-
- mtk_nor_set_addr(mtk_nor, addr);
-
- bufidx = 0;
- for (i = 0; i < SFLASH_WRBUF_SIZE; i += 4) {
- data = buf[bufidx + 3]<<24 | buf[bufidx + 2]<<16 |
- buf[bufidx + 1]<<8 | buf[bufidx];
- bufidx += 4;
- writel(data, mtk_nor->base + MTK_NOR_PP_DATA_REG);
- }
- return mtk_nor_execute_cmd(mtk_nor, MTK_NOR_WR_CMD);
-}
-
-static ssize_t mtk_nor_write(struct spi_nor *nor, loff_t to, size_t len,
- const u_char *buf)
-{
- int ret;
- struct mtk_nor *mtk_nor = nor->priv;
- size_t i;
-
- ret = mtk_nor_write_buffer_enable(mtk_nor);
- if (ret < 0) {
- dev_warn(mtk_nor->dev, "write buffer enable failed!\n");
- return ret;
- }
-
- for (i = 0; i + SFLASH_WRBUF_SIZE <= len; i += SFLASH_WRBUF_SIZE) {
- ret = mtk_nor_write_buffer(mtk_nor, to, buf);
- if (ret < 0) {
- dev_err(mtk_nor->dev, "write buffer failed!\n");
- return ret;
- }
- to += SFLASH_WRBUF_SIZE;
- buf += SFLASH_WRBUF_SIZE;
- }
- ret = mtk_nor_write_buffer_disable(mtk_nor);
- if (ret < 0) {
- dev_warn(mtk_nor->dev, "write buffer disable failed!\n");
- return ret;
- }
-
- if (i < len) {
- ret = mtk_nor_write_single_byte(mtk_nor, to,
- (int)(len - i), (u8 *)buf);
- if (ret < 0) {
- dev_err(mtk_nor->dev, "write single byte failed!\n");
- return ret;
- }
- }
-
- return len;
-}
-
-static int mtk_nor_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, size_t len)
-{
- int ret;
- struct mtk_nor *mtk_nor = nor->priv;
-
- switch (opcode) {
- case SPINOR_OP_RDSR:
- ret = mtk_nor_execute_cmd(mtk_nor, MTK_NOR_RDSR_CMD);
- if (ret < 0)
- return ret;
- if (len == 1)
- *buf = readb(mtk_nor->base + MTK_NOR_RDSR_REG);
- else
- dev_err(mtk_nor->dev, "len should be 1 for read status!\n");
- break;
- default:
- ret = mtk_nor_do_tx_rx(mtk_nor, opcode, NULL, 0, buf, len);
- break;
- }
- return ret;
-}
-
-static int mtk_nor_write_reg(struct spi_nor *nor, u8 opcode, const u8 *buf,
- size_t len)
-{
- int ret;
- struct mtk_nor *mtk_nor = nor->priv;
-
- switch (opcode) {
- case SPINOR_OP_WRSR:
- /* We only handle 1 byte */
- ret = mtk_nor_wr_sr(mtk_nor, *buf);
- break;
- default:
- ret = mtk_nor_do_tx_rx(mtk_nor, opcode, buf, len, NULL, 0);
- if (ret)
- dev_warn(mtk_nor->dev, "write reg failure!\n");
- break;
- }
- return ret;
-}
-
-static void mtk_nor_disable_clk(struct mtk_nor *mtk_nor)
-{
- clk_disable_unprepare(mtk_nor->spi_clk);
- clk_disable_unprepare(mtk_nor->nor_clk);
-}
-
-static int mtk_nor_enable_clk(struct mtk_nor *mtk_nor)
-{
- int ret;
-
- ret = clk_prepare_enable(mtk_nor->spi_clk);
- if (ret)
- return ret;
-
- ret = clk_prepare_enable(mtk_nor->nor_clk);
- if (ret) {
- clk_disable_unprepare(mtk_nor->spi_clk);
- return ret;
- }
-
- return 0;
-}
-
-static const struct spi_nor_controller_ops mtk_controller_ops = {
- .read_reg = mtk_nor_read_reg,
- .write_reg = mtk_nor_write_reg,
- .read = mtk_nor_read,
- .write = mtk_nor_write,
-};
-
-static int mtk_nor_init(struct mtk_nor *mtk_nor,
- struct device_node *flash_node)
-{
- const struct spi_nor_hwcaps hwcaps = {
- .mask = SNOR_HWCAPS_READ |
- SNOR_HWCAPS_READ_FAST |
- SNOR_HWCAPS_READ_1_1_2 |
- SNOR_HWCAPS_PP,
- };
- int ret;
- struct spi_nor *nor;
-
- /* initialize controller to accept commands */
- writel(MTK_NOR_ENABLE_SF_CMD, mtk_nor->base + MTK_NOR_WRPROT_REG);
-
- nor = &mtk_nor->nor;
- nor->dev = mtk_nor->dev;
- nor->priv = mtk_nor;
- spi_nor_set_flash_node(nor, flash_node);
- nor->controller_ops = &mtk_controller_ops;
-
- nor->mtd.name = "mtk_nor";
- /* initialized with NULL */
- ret = spi_nor_scan(nor, NULL, &hwcaps);
- if (ret)
- return ret;
-
- return mtd_device_register(&nor->mtd, NULL, 0);
-}
-
-static int mtk_nor_drv_probe(struct platform_device *pdev)
-{
- struct device_node *flash_np;
- struct resource *res;
- int ret;
- struct mtk_nor *mtk_nor;
-
- if (!pdev->dev.of_node) {
- dev_err(&pdev->dev, "No DT found\n");
- return -EINVAL;
- }
-
- mtk_nor = devm_kzalloc(&pdev->dev, sizeof(*mtk_nor), GFP_KERNEL);
- if (!mtk_nor)
- return -ENOMEM;
- platform_set_drvdata(pdev, mtk_nor);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- mtk_nor->base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(mtk_nor->base))
- return PTR_ERR(mtk_nor->base);
-
- mtk_nor->spi_clk = devm_clk_get(&pdev->dev, "spi");
- if (IS_ERR(mtk_nor->spi_clk))
- return PTR_ERR(mtk_nor->spi_clk);
-
- mtk_nor->nor_clk = devm_clk_get(&pdev->dev, "sf");
- if (IS_ERR(mtk_nor->nor_clk))
- return PTR_ERR(mtk_nor->nor_clk);
-
- mtk_nor->dev = &pdev->dev;
-
- ret = mtk_nor_enable_clk(mtk_nor);
- if (ret)
- return ret;
-
- /* only support one attached flash */
- flash_np = of_get_next_available_child(pdev->dev.of_node, NULL);
- if (!flash_np) {
- dev_err(&pdev->dev, "no SPI flash device to configure\n");
- ret = -ENODEV;
- goto nor_free;
- }
- ret = mtk_nor_init(mtk_nor, flash_np);
-
-nor_free:
- if (ret)
- mtk_nor_disable_clk(mtk_nor);
-
- return ret;
-}
-
-static int mtk_nor_drv_remove(struct platform_device *pdev)
-{
- struct mtk_nor *mtk_nor = platform_get_drvdata(pdev);
-
- mtk_nor_disable_clk(mtk_nor);
-
- return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int mtk_nor_suspend(struct device *dev)
-{
- struct mtk_nor *mtk_nor = dev_get_drvdata(dev);
-
- mtk_nor_disable_clk(mtk_nor);
-
- return 0;
-}
-
-static int mtk_nor_resume(struct device *dev)
-{
- struct mtk_nor *mtk_nor = dev_get_drvdata(dev);
-
- return mtk_nor_enable_clk(mtk_nor);
-}
-
-static const struct dev_pm_ops mtk_nor_dev_pm_ops = {
- .suspend = mtk_nor_suspend,
- .resume = mtk_nor_resume,
-};
-
-#define MTK_NOR_DEV_PM_OPS (&mtk_nor_dev_pm_ops)
-#else
-#define MTK_NOR_DEV_PM_OPS NULL
-#endif
-
-static const struct of_device_id mtk_nor_of_ids[] = {
- { .compatible = "mediatek,mt8173-nor"},
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, mtk_nor_of_ids);
-
-static struct platform_driver mtk_nor_driver = {
- .probe = mtk_nor_drv_probe,
- .remove = mtk_nor_drv_remove,
- .driver = {
- .name = "mtk-nor",
- .pm = MTK_NOR_DEV_PM_OPS,
- .of_match_table = mtk_nor_of_ids,
- },
-};
-
-module_platform_driver(mtk_nor_driver);
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("MediaTek SPI NOR Flash Driver");
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * SPI-NOR driver for NXP SPI Flash Interface (SPIFI)
- *
- * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
- *
- * Based on Freescale QuadSPI driver:
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/iopoll.h>
-#include <linux/module.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/spi-nor.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-
-/* NXP SPIFI registers, bits and macros */
-#define SPIFI_CTRL 0x000
-#define SPIFI_CTRL_TIMEOUT(timeout) (timeout)
-#define SPIFI_CTRL_CSHIGH(cshigh) ((cshigh) << 16)
-#define SPIFI_CTRL_MODE3 BIT(23)
-#define SPIFI_CTRL_DUAL BIT(28)
-#define SPIFI_CTRL_FBCLK BIT(30)
-#define SPIFI_CMD 0x004
-#define SPIFI_CMD_DATALEN(dlen) ((dlen) & 0x3fff)
-#define SPIFI_CMD_DOUT BIT(15)
-#define SPIFI_CMD_INTLEN(ilen) ((ilen) << 16)
-#define SPIFI_CMD_FIELDFORM(field) ((field) << 19)
-#define SPIFI_CMD_FIELDFORM_ALL_SERIAL SPIFI_CMD_FIELDFORM(0x0)
-#define SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA SPIFI_CMD_FIELDFORM(0x1)
-#define SPIFI_CMD_FRAMEFORM(frame) ((frame) << 21)
-#define SPIFI_CMD_FRAMEFORM_OPCODE_ONLY SPIFI_CMD_FRAMEFORM(0x1)
-#define SPIFI_CMD_OPCODE(op) ((op) << 24)
-#define SPIFI_ADDR 0x008
-#define SPIFI_IDATA 0x00c
-#define SPIFI_CLIMIT 0x010
-#define SPIFI_DATA 0x014
-#define SPIFI_MCMD 0x018
-#define SPIFI_STAT 0x01c
-#define SPIFI_STAT_MCINIT BIT(0)
-#define SPIFI_STAT_CMD BIT(1)
-#define SPIFI_STAT_RESET BIT(4)
-
-#define SPI_NOR_MAX_ID_LEN 6
-
-struct nxp_spifi {
- struct device *dev;
- struct clk *clk_spifi;
- struct clk *clk_reg;
- void __iomem *io_base;
- void __iomem *flash_base;
- struct spi_nor nor;
- bool memory_mode;
- u32 mcmd;
-};
-
-static int nxp_spifi_wait_for_cmd(struct nxp_spifi *spifi)
-{
- u8 stat;
- int ret;
-
- ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat,
- !(stat & SPIFI_STAT_CMD), 10, 30);
- if (ret)
- dev_warn(spifi->dev, "command timed out\n");
-
- return ret;
-}
-
-static int nxp_spifi_reset(struct nxp_spifi *spifi)
-{
- u8 stat;
- int ret;
-
- writel(SPIFI_STAT_RESET, spifi->io_base + SPIFI_STAT);
- ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat,
- !(stat & SPIFI_STAT_RESET), 10, 30);
- if (ret)
- dev_warn(spifi->dev, "state reset timed out\n");
-
- return ret;
-}
-
-static int nxp_spifi_set_memory_mode_off(struct nxp_spifi *spifi)
-{
- int ret;
-
- if (!spifi->memory_mode)
- return 0;
-
- ret = nxp_spifi_reset(spifi);
- if (ret)
- dev_err(spifi->dev, "unable to enter command mode\n");
- else
- spifi->memory_mode = false;
-
- return ret;
-}
-
-static int nxp_spifi_set_memory_mode_on(struct nxp_spifi *spifi)
-{
- u8 stat;
- int ret;
-
- if (spifi->memory_mode)
- return 0;
-
- writel(spifi->mcmd, spifi->io_base + SPIFI_MCMD);
- ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat,
- stat & SPIFI_STAT_MCINIT, 10, 30);
- if (ret)
- dev_err(spifi->dev, "unable to enter memory mode\n");
- else
- spifi->memory_mode = true;
-
- return ret;
-}
-
-static int nxp_spifi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
- size_t len)
-{
- struct nxp_spifi *spifi = nor->priv;
- u32 cmd;
- int ret;
-
- ret = nxp_spifi_set_memory_mode_off(spifi);
- if (ret)
- return ret;
-
- cmd = SPIFI_CMD_DATALEN(len) |
- SPIFI_CMD_OPCODE(opcode) |
- SPIFI_CMD_FIELDFORM_ALL_SERIAL |
- SPIFI_CMD_FRAMEFORM_OPCODE_ONLY;
- writel(cmd, spifi->io_base + SPIFI_CMD);
-
- while (len--)
- *buf++ = readb(spifi->io_base + SPIFI_DATA);
-
- return nxp_spifi_wait_for_cmd(spifi);
-}
-
-static int nxp_spifi_write_reg(struct spi_nor *nor, u8 opcode, const u8 *buf,
- size_t len)
-{
- struct nxp_spifi *spifi = nor->priv;
- u32 cmd;
- int ret;
-
- ret = nxp_spifi_set_memory_mode_off(spifi);
- if (ret)
- return ret;
-
- cmd = SPIFI_CMD_DOUT |
- SPIFI_CMD_DATALEN(len) |
- SPIFI_CMD_OPCODE(opcode) |
- SPIFI_CMD_FIELDFORM_ALL_SERIAL |
- SPIFI_CMD_FRAMEFORM_OPCODE_ONLY;
- writel(cmd, spifi->io_base + SPIFI_CMD);
-
- while (len--)
- writeb(*buf++, spifi->io_base + SPIFI_DATA);
-
- return nxp_spifi_wait_for_cmd(spifi);
-}
-
-static ssize_t nxp_spifi_read(struct spi_nor *nor, loff_t from, size_t len,
- u_char *buf)
-{
- struct nxp_spifi *spifi = nor->priv;
- int ret;
-
- ret = nxp_spifi_set_memory_mode_on(spifi);
- if (ret)
- return ret;
-
- memcpy_fromio(buf, spifi->flash_base + from, len);
-
- return len;
-}
-
-static ssize_t nxp_spifi_write(struct spi_nor *nor, loff_t to, size_t len,
- const u_char *buf)
-{
- struct nxp_spifi *spifi = nor->priv;
- u32 cmd;
- int ret;
- size_t i;
-
- ret = nxp_spifi_set_memory_mode_off(spifi);
- if (ret)
- return ret;
-
- writel(to, spifi->io_base + SPIFI_ADDR);
-
- cmd = SPIFI_CMD_DOUT |
- SPIFI_CMD_DATALEN(len) |
- SPIFI_CMD_FIELDFORM_ALL_SERIAL |
- SPIFI_CMD_OPCODE(nor->program_opcode) |
- SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
- writel(cmd, spifi->io_base + SPIFI_CMD);
-
- for (i = 0; i < len; i++)
- writeb(buf[i], spifi->io_base + SPIFI_DATA);
-
- ret = nxp_spifi_wait_for_cmd(spifi);
- if (ret)
- return ret;
-
- return len;
-}
-
-static int nxp_spifi_erase(struct spi_nor *nor, loff_t offs)
-{
- struct nxp_spifi *spifi = nor->priv;
- u32 cmd;
- int ret;
-
- ret = nxp_spifi_set_memory_mode_off(spifi);
- if (ret)
- return ret;
-
- writel(offs, spifi->io_base + SPIFI_ADDR);
-
- cmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL |
- SPIFI_CMD_OPCODE(nor->erase_opcode) |
- SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
- writel(cmd, spifi->io_base + SPIFI_CMD);
-
- return nxp_spifi_wait_for_cmd(spifi);
-}
-
-static int nxp_spifi_setup_memory_cmd(struct nxp_spifi *spifi)
-{
- switch (spifi->nor.read_proto) {
- case SNOR_PROTO_1_1_1:
- spifi->mcmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL;
- break;
- case SNOR_PROTO_1_1_2:
- case SNOR_PROTO_1_1_4:
- spifi->mcmd = SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA;
- break;
- default:
- dev_err(spifi->dev, "unsupported SPI read mode\n");
- return -EINVAL;
- }
-
- /* Memory mode supports address length between 1 and 4 */
- if (spifi->nor.addr_width < 1 || spifi->nor.addr_width > 4)
- return -EINVAL;
-
- spifi->mcmd |= SPIFI_CMD_OPCODE(spifi->nor.read_opcode) |
- SPIFI_CMD_INTLEN(spifi->nor.read_dummy / 8) |
- SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
-
- return 0;
-}
-
-static void nxp_spifi_dummy_id_read(struct spi_nor *nor)
-{
- u8 id[SPI_NOR_MAX_ID_LEN];
- nor->controller_ops->read_reg(nor, SPINOR_OP_RDID, id,
- SPI_NOR_MAX_ID_LEN);
-}
-
-static const struct spi_nor_controller_ops nxp_spifi_controller_ops = {
- .read_reg = nxp_spifi_read_reg,
- .write_reg = nxp_spifi_write_reg,
- .read = nxp_spifi_read,
- .write = nxp_spifi_write,
- .erase = nxp_spifi_erase,
-};
-
-static int nxp_spifi_setup_flash(struct nxp_spifi *spifi,
- struct device_node *np)
-{
- struct spi_nor_hwcaps hwcaps = {
- .mask = SNOR_HWCAPS_READ |
- SNOR_HWCAPS_READ_FAST |
- SNOR_HWCAPS_PP,
- };
- u32 ctrl, property;
- u16 mode = 0;
- int ret;
-
- if (!of_property_read_u32(np, "spi-rx-bus-width", &property)) {
- switch (property) {
- case 1:
- break;
- case 2:
- mode |= SPI_RX_DUAL;
- break;
- case 4:
- mode |= SPI_RX_QUAD;
- break;
- default:
- dev_err(spifi->dev, "unsupported rx-bus-width\n");
- return -EINVAL;
- }
- }
-
- if (of_find_property(np, "spi-cpha", NULL))
- mode |= SPI_CPHA;
-
- if (of_find_property(np, "spi-cpol", NULL))
- mode |= SPI_CPOL;
-
- /* Setup control register defaults */
- ctrl = SPIFI_CTRL_TIMEOUT(1000) |
- SPIFI_CTRL_CSHIGH(15) |
- SPIFI_CTRL_FBCLK;
-
- if (mode & SPI_RX_DUAL) {
- ctrl |= SPIFI_CTRL_DUAL;
- hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
- } else if (mode & SPI_RX_QUAD) {
- ctrl &= ~SPIFI_CTRL_DUAL;
- hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
- } else {
- ctrl |= SPIFI_CTRL_DUAL;
- }
-
- switch (mode & (SPI_CPHA | SPI_CPOL)) {
- case SPI_MODE_0:
- ctrl &= ~SPIFI_CTRL_MODE3;
- break;
- case SPI_MODE_3:
- ctrl |= SPIFI_CTRL_MODE3;
- break;
- default:
- dev_err(spifi->dev, "only mode 0 and 3 supported\n");
- return -EINVAL;
- }
-
- writel(ctrl, spifi->io_base + SPIFI_CTRL);
-
- spifi->nor.dev = spifi->dev;
- spi_nor_set_flash_node(&spifi->nor, np);
- spifi->nor.priv = spifi;
- spifi->nor.controller_ops = &nxp_spifi_controller_ops;
-
- /*
- * The first read on a hard reset isn't reliable so do a
- * dummy read of the id before calling spi_nor_scan().
- * The reason for this problem is unknown.
- *
- * The official NXP spifilib uses more or less the same
- * workaround that is applied here by reading the device
- * id multiple times.
- */
- nxp_spifi_dummy_id_read(&spifi->nor);
-
- ret = spi_nor_scan(&spifi->nor, NULL, &hwcaps);
- if (ret) {
- dev_err(spifi->dev, "device scan failed\n");
- return ret;
- }
-
- ret = nxp_spifi_setup_memory_cmd(spifi);
- if (ret) {
- dev_err(spifi->dev, "memory command setup failed\n");
- return ret;
- }
-
- ret = mtd_device_register(&spifi->nor.mtd, NULL, 0);
- if (ret) {
- dev_err(spifi->dev, "mtd device parse failed\n");
- return ret;
- }
-
- return 0;
-}
-
-static int nxp_spifi_probe(struct platform_device *pdev)
-{
- struct device_node *flash_np;
- struct nxp_spifi *spifi;
- struct resource *res;
- int ret;
-
- spifi = devm_kzalloc(&pdev->dev, sizeof(*spifi), GFP_KERNEL);
- if (!spifi)
- return -ENOMEM;
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spifi");
- spifi->io_base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(spifi->io_base))
- return PTR_ERR(spifi->io_base);
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "flash");
- spifi->flash_base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(spifi->flash_base))
- return PTR_ERR(spifi->flash_base);
-
- spifi->clk_spifi = devm_clk_get(&pdev->dev, "spifi");
- if (IS_ERR(spifi->clk_spifi)) {
- dev_err(&pdev->dev, "spifi clock not found\n");
- return PTR_ERR(spifi->clk_spifi);
- }
-
- spifi->clk_reg = devm_clk_get(&pdev->dev, "reg");
- if (IS_ERR(spifi->clk_reg)) {
- dev_err(&pdev->dev, "reg clock not found\n");
- return PTR_ERR(spifi->clk_reg);
- }
-
- ret = clk_prepare_enable(spifi->clk_reg);
- if (ret) {
- dev_err(&pdev->dev, "unable to enable reg clock\n");
- return ret;
- }
-
- ret = clk_prepare_enable(spifi->clk_spifi);
- if (ret) {
- dev_err(&pdev->dev, "unable to enable spifi clock\n");
- goto dis_clk_reg;
- }
-
- spifi->dev = &pdev->dev;
- platform_set_drvdata(pdev, spifi);
-
- /* Initialize and reset device */
- nxp_spifi_reset(spifi);
- writel(0, spifi->io_base + SPIFI_IDATA);
- writel(0, spifi->io_base + SPIFI_MCMD);
- nxp_spifi_reset(spifi);
-
- flash_np = of_get_next_available_child(pdev->dev.of_node, NULL);
- if (!flash_np) {
- dev_err(&pdev->dev, "no SPI flash device to configure\n");
- ret = -ENODEV;
- goto dis_clks;
- }
-
- ret = nxp_spifi_setup_flash(spifi, flash_np);
- of_node_put(flash_np);
- if (ret) {
- dev_err(&pdev->dev, "unable to setup flash chip\n");
- goto dis_clks;
- }
-
- return 0;
-
-dis_clks:
- clk_disable_unprepare(spifi->clk_spifi);
-dis_clk_reg:
- clk_disable_unprepare(spifi->clk_reg);
- return ret;
-}
-
-static int nxp_spifi_remove(struct platform_device *pdev)
-{
- struct nxp_spifi *spifi = platform_get_drvdata(pdev);
-
- mtd_device_unregister(&spifi->nor.mtd);
- clk_disable_unprepare(spifi->clk_spifi);
- clk_disable_unprepare(spifi->clk_reg);
-
- return 0;
-}
-
-static const struct of_device_id nxp_spifi_match[] = {
- {.compatible = "nxp,lpc1773-spifi"},
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, nxp_spifi_match);
-
-static struct platform_driver nxp_spifi_driver = {
- .probe = nxp_spifi_probe,
- .remove = nxp_spifi_remove,
- .driver = {
- .name = "nxp-spifi",
- .of_match_table = nxp_spifi_match,
- },
-};
-module_platform_driver(nxp_spifi_driver);
-
-MODULE_DESCRIPTION("NXP SPI Flash Interface driver");
-MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
-MODULE_LICENSE("GPL v2");
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/slab.h>
+#include <linux/sort.h>
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+#define SFDP_PARAM_HEADER_ID(p) (((p)->id_msb << 8) | (p)->id_lsb)
+#define SFDP_PARAM_HEADER_PTP(p) \
+ (((p)->parameter_table_pointer[2] << 16) | \
+ ((p)->parameter_table_pointer[1] << 8) | \
+ ((p)->parameter_table_pointer[0] << 0))
+
+#define SFDP_BFPT_ID 0xff00 /* Basic Flash Parameter Table */
+#define SFDP_SECTOR_MAP_ID 0xff81 /* Sector Map Table */
+#define SFDP_4BAIT_ID 0xff84 /* 4-byte Address Instruction Table */
+
+#define SFDP_SIGNATURE 0x50444653U
+#define SFDP_JESD216_MAJOR 1
+#define SFDP_JESD216_MINOR 0
+#define SFDP_JESD216A_MINOR 5
+#define SFDP_JESD216B_MINOR 6
+
+struct sfdp_header {
+ u32 signature; /* Ox50444653U <=> "SFDP" */
+ u8 minor;
+ u8 major;
+ u8 nph; /* 0-base number of parameter headers */
+ u8 unused;
+
+ /* Basic Flash Parameter Table. */
+ struct sfdp_parameter_header bfpt_header;
+};
+
+/* Fast Read settings. */
+struct sfdp_bfpt_read {
+ /* The Fast Read x-y-z hardware capability in params->hwcaps.mask. */
+ u32 hwcaps;
+
+ /*
+ * The <supported_bit> bit in <supported_dword> BFPT DWORD tells us
+ * whether the Fast Read x-y-z command is supported.
+ */
+ u32 supported_dword;
+ u32 supported_bit;
+
+ /*
+ * The half-word at offset <setting_shift> in <setting_dword> BFPT DWORD
+ * encodes the op code, the number of mode clocks and the number of wait
+ * states to be used by Fast Read x-y-z command.
+ */
+ u32 settings_dword;
+ u32 settings_shift;
+
+ /* The SPI protocol for this Fast Read x-y-z command. */
+ enum spi_nor_protocol proto;
+};
+
+struct sfdp_bfpt_erase {
+ /*
+ * The half-word at offset <shift> in DWORD <dwoard> encodes the
+ * op code and erase sector size to be used by Sector Erase commands.
+ */
+ u32 dword;
+ u32 shift;
+};
+
+#define SMPT_CMD_ADDRESS_LEN_MASK GENMASK(23, 22)
+#define SMPT_CMD_ADDRESS_LEN_0 (0x0UL << 22)
+#define SMPT_CMD_ADDRESS_LEN_3 (0x1UL << 22)
+#define SMPT_CMD_ADDRESS_LEN_4 (0x2UL << 22)
+#define SMPT_CMD_ADDRESS_LEN_USE_CURRENT (0x3UL << 22)
+
+#define SMPT_CMD_READ_DUMMY_MASK GENMASK(19, 16)
+#define SMPT_CMD_READ_DUMMY_SHIFT 16
+#define SMPT_CMD_READ_DUMMY(_cmd) \
+ (((_cmd) & SMPT_CMD_READ_DUMMY_MASK) >> SMPT_CMD_READ_DUMMY_SHIFT)
+#define SMPT_CMD_READ_DUMMY_IS_VARIABLE 0xfUL
+
+#define SMPT_CMD_READ_DATA_MASK GENMASK(31, 24)
+#define SMPT_CMD_READ_DATA_SHIFT 24
+#define SMPT_CMD_READ_DATA(_cmd) \
+ (((_cmd) & SMPT_CMD_READ_DATA_MASK) >> SMPT_CMD_READ_DATA_SHIFT)
+
+#define SMPT_CMD_OPCODE_MASK GENMASK(15, 8)
+#define SMPT_CMD_OPCODE_SHIFT 8
+#define SMPT_CMD_OPCODE(_cmd) \
+ (((_cmd) & SMPT_CMD_OPCODE_MASK) >> SMPT_CMD_OPCODE_SHIFT)
+
+#define SMPT_MAP_REGION_COUNT_MASK GENMASK(23, 16)
+#define SMPT_MAP_REGION_COUNT_SHIFT 16
+#define SMPT_MAP_REGION_COUNT(_header) \
+ ((((_header) & SMPT_MAP_REGION_COUNT_MASK) >> \
+ SMPT_MAP_REGION_COUNT_SHIFT) + 1)
+
+#define SMPT_MAP_ID_MASK GENMASK(15, 8)
+#define SMPT_MAP_ID_SHIFT 8
+#define SMPT_MAP_ID(_header) \
+ (((_header) & SMPT_MAP_ID_MASK) >> SMPT_MAP_ID_SHIFT)
+
+#define SMPT_MAP_REGION_SIZE_MASK GENMASK(31, 8)
+#define SMPT_MAP_REGION_SIZE_SHIFT 8
+#define SMPT_MAP_REGION_SIZE(_region) \
+ (((((_region) & SMPT_MAP_REGION_SIZE_MASK) >> \
+ SMPT_MAP_REGION_SIZE_SHIFT) + 1) * 256)
+
+#define SMPT_MAP_REGION_ERASE_TYPE_MASK GENMASK(3, 0)
+#define SMPT_MAP_REGION_ERASE_TYPE(_region) \
+ ((_region) & SMPT_MAP_REGION_ERASE_TYPE_MASK)
+
+#define SMPT_DESC_TYPE_MAP BIT(1)
+#define SMPT_DESC_END BIT(0)
+
+#define SFDP_4BAIT_DWORD_MAX 2
+
+struct sfdp_4bait {
+ /* The hardware capability. */
+ u32 hwcaps;
+
+ /*
+ * The <supported_bit> bit in DWORD1 of the 4BAIT tells us whether
+ * the associated 4-byte address op code is supported.
+ */
+ u32 supported_bit;
+};
+
+/**
+ * spi_nor_read_raw() - raw read of serial flash memory. read_opcode,
+ * addr_width and read_dummy members of the struct spi_nor
+ * should be previously
+ * set.
+ * @nor: pointer to a 'struct spi_nor'
+ * @addr: offset in the serial flash memory
+ * @len: number of bytes to read
+ * @buf: buffer where the data is copied into (dma-safe memory)
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_read_raw(struct spi_nor *nor, u32 addr, size_t len, u8 *buf)
+{
+ ssize_t ret;
+
+ while (len) {
+ ret = spi_nor_read_data(nor, addr, len, buf);
+ if (ret < 0)
+ return ret;
+ if (!ret || ret > len)
+ return -EIO;
+
+ buf += ret;
+ addr += ret;
+ len -= ret;
+ }
+ return 0;
+}
+
+/**
+ * spi_nor_read_sfdp() - read Serial Flash Discoverable Parameters.
+ * @nor: pointer to a 'struct spi_nor'
+ * @addr: offset in the SFDP area to start reading data from
+ * @len: number of bytes to read
+ * @buf: buffer where the SFDP data are copied into (dma-safe memory)
+ *
+ * Whatever the actual numbers of bytes for address and dummy cycles are
+ * for (Fast) Read commands, the Read SFDP (5Ah) instruction is always
+ * followed by a 3-byte address and 8 dummy clock cycles.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_read_sfdp(struct spi_nor *nor, u32 addr,
+ size_t len, void *buf)
+{
+ u8 addr_width, read_opcode, read_dummy;
+ int ret;
+
+ read_opcode = nor->read_opcode;
+ addr_width = nor->addr_width;
+ read_dummy = nor->read_dummy;
+
+ nor->read_opcode = SPINOR_OP_RDSFDP;
+ nor->addr_width = 3;
+ nor->read_dummy = 8;
+
+ ret = spi_nor_read_raw(nor, addr, len, buf);
+
+ nor->read_opcode = read_opcode;
+ nor->addr_width = addr_width;
+ nor->read_dummy = read_dummy;
+
+ return ret;
+}
+
+/**
+ * spi_nor_read_sfdp_dma_unsafe() - read Serial Flash Discoverable Parameters.
+ * @nor: pointer to a 'struct spi_nor'
+ * @addr: offset in the SFDP area to start reading data from
+ * @len: number of bytes to read
+ * @buf: buffer where the SFDP data are copied into
+ *
+ * Wrap spi_nor_read_sfdp() using a kmalloc'ed bounce buffer as @buf is now not
+ * guaranteed to be dma-safe.
+ *
+ * Return: -ENOMEM if kmalloc() fails, the return code of spi_nor_read_sfdp()
+ * otherwise.
+ */
+static int spi_nor_read_sfdp_dma_unsafe(struct spi_nor *nor, u32 addr,
+ size_t len, void *buf)
+{
+ void *dma_safe_buf;
+ int ret;
+
+ dma_safe_buf = kmalloc(len, GFP_KERNEL);
+ if (!dma_safe_buf)
+ return -ENOMEM;
+
+ ret = spi_nor_read_sfdp(nor, addr, len, dma_safe_buf);
+ memcpy(buf, dma_safe_buf, len);
+ kfree(dma_safe_buf);
+
+ return ret;
+}
+
+static void
+spi_nor_set_read_settings_from_bfpt(struct spi_nor_read_command *read,
+ u16 half,
+ enum spi_nor_protocol proto)
+{
+ read->num_mode_clocks = (half >> 5) & 0x07;
+ read->num_wait_states = (half >> 0) & 0x1f;
+ read->opcode = (half >> 8) & 0xff;
+ read->proto = proto;
+}
+
+static const struct sfdp_bfpt_read sfdp_bfpt_reads[] = {
+ /* Fast Read 1-1-2 */
+ {
+ SNOR_HWCAPS_READ_1_1_2,
+ BFPT_DWORD(1), BIT(16), /* Supported bit */
+ BFPT_DWORD(4), 0, /* Settings */
+ SNOR_PROTO_1_1_2,
+ },
+
+ /* Fast Read 1-2-2 */
+ {
+ SNOR_HWCAPS_READ_1_2_2,
+ BFPT_DWORD(1), BIT(20), /* Supported bit */
+ BFPT_DWORD(4), 16, /* Settings */
+ SNOR_PROTO_1_2_2,
+ },
+
+ /* Fast Read 2-2-2 */
+ {
+ SNOR_HWCAPS_READ_2_2_2,
+ BFPT_DWORD(5), BIT(0), /* Supported bit */
+ BFPT_DWORD(6), 16, /* Settings */
+ SNOR_PROTO_2_2_2,
+ },
+
+ /* Fast Read 1-1-4 */
+ {
+ SNOR_HWCAPS_READ_1_1_4,
+ BFPT_DWORD(1), BIT(22), /* Supported bit */
+ BFPT_DWORD(3), 16, /* Settings */
+ SNOR_PROTO_1_1_4,
+ },
+
+ /* Fast Read 1-4-4 */
+ {
+ SNOR_HWCAPS_READ_1_4_4,
+ BFPT_DWORD(1), BIT(21), /* Supported bit */
+ BFPT_DWORD(3), 0, /* Settings */
+ SNOR_PROTO_1_4_4,
+ },
+
+ /* Fast Read 4-4-4 */
+ {
+ SNOR_HWCAPS_READ_4_4_4,
+ BFPT_DWORD(5), BIT(4), /* Supported bit */
+ BFPT_DWORD(7), 16, /* Settings */
+ SNOR_PROTO_4_4_4,
+ },
+};
+
+static const struct sfdp_bfpt_erase sfdp_bfpt_erases[] = {
+ /* Erase Type 1 in DWORD8 bits[15:0] */
+ {BFPT_DWORD(8), 0},
+
+ /* Erase Type 2 in DWORD8 bits[31:16] */
+ {BFPT_DWORD(8), 16},
+
+ /* Erase Type 3 in DWORD9 bits[15:0] */
+ {BFPT_DWORD(9), 0},
+
+ /* Erase Type 4 in DWORD9 bits[31:16] */
+ {BFPT_DWORD(9), 16},
+};
+
+/**
+ * spi_nor_set_erase_settings_from_bfpt() - set erase type settings from BFPT
+ * @erase: pointer to a structure that describes a SPI NOR erase type
+ * @size: the size of the sector/block erased by the erase type
+ * @opcode: the SPI command op code to erase the sector/block
+ * @i: erase type index as sorted in the Basic Flash Parameter Table
+ *
+ * The supported Erase Types will be sorted at init in ascending order, with
+ * the smallest Erase Type size being the first member in the erase_type array
+ * of the spi_nor_erase_map structure. Save the Erase Type index as sorted in
+ * the Basic Flash Parameter Table since it will be used later on to
+ * synchronize with the supported Erase Types defined in SFDP optional tables.
+ */
+static void
+spi_nor_set_erase_settings_from_bfpt(struct spi_nor_erase_type *erase,
+ u32 size, u8 opcode, u8 i)
+{
+ erase->idx = i;
+ spi_nor_set_erase_type(erase, size, opcode);
+}
+
+/**
+ * spi_nor_map_cmp_erase_type() - compare the map's erase types by size
+ * @l: member in the left half of the map's erase_type array
+ * @r: member in the right half of the map's erase_type array
+ *
+ * Comparison function used in the sort() call to sort in ascending order the
+ * map's erase types, the smallest erase type size being the first member in the
+ * sorted erase_type array.
+ *
+ * Return: the result of @l->size - @r->size
+ */
+static int spi_nor_map_cmp_erase_type(const void *l, const void *r)
+{
+ const struct spi_nor_erase_type *left = l, *right = r;
+
+ return left->size - right->size;
+}
+
+/**
+ * spi_nor_sort_erase_mask() - sort erase mask
+ * @map: the erase map of the SPI NOR
+ * @erase_mask: the erase type mask to be sorted
+ *
+ * Replicate the sort done for the map's erase types in BFPT: sort the erase
+ * mask in ascending order with the smallest erase type size starting from
+ * BIT(0) in the sorted erase mask.
+ *
+ * Return: sorted erase mask.
+ */
+static u8 spi_nor_sort_erase_mask(struct spi_nor_erase_map *map, u8 erase_mask)
+{
+ struct spi_nor_erase_type *erase_type = map->erase_type;
+ int i;
+ u8 sorted_erase_mask = 0;
+
+ if (!erase_mask)
+ return 0;
+
+ /* Replicate the sort done for the map's erase types. */
+ for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++)
+ if (erase_type[i].size && erase_mask & BIT(erase_type[i].idx))
+ sorted_erase_mask |= BIT(i);
+
+ return sorted_erase_mask;
+}
+
+/**
+ * spi_nor_regions_sort_erase_types() - sort erase types in each region
+ * @map: the erase map of the SPI NOR
+ *
+ * Function assumes that the erase types defined in the erase map are already
+ * sorted in ascending order, with the smallest erase type size being the first
+ * member in the erase_type array. It replicates the sort done for the map's
+ * erase types. Each region's erase bitmask will indicate which erase types are
+ * supported from the sorted erase types defined in the erase map.
+ * Sort the all region's erase type at init in order to speed up the process of
+ * finding the best erase command at runtime.
+ */
+static void spi_nor_regions_sort_erase_types(struct spi_nor_erase_map *map)
+{
+ struct spi_nor_erase_region *region = map->regions;
+ u8 region_erase_mask, sorted_erase_mask;
+
+ while (region) {
+ region_erase_mask = region->offset & SNOR_ERASE_TYPE_MASK;
+
+ sorted_erase_mask = spi_nor_sort_erase_mask(map,
+ region_erase_mask);
+
+ /* Overwrite erase mask. */
+ region->offset = (region->offset & ~SNOR_ERASE_TYPE_MASK) |
+ sorted_erase_mask;
+
+ region = spi_nor_region_next(region);
+ }
+}
+
+/**
+ * spi_nor_parse_bfpt() - read and parse the Basic Flash Parameter Table.
+ * @nor: pointer to a 'struct spi_nor'
+ * @bfpt_header: pointer to the 'struct sfdp_parameter_header' describing
+ * the Basic Flash Parameter Table length and version
+ * @params: pointer to the 'struct spi_nor_flash_parameter' to be
+ * filled
+ *
+ * The Basic Flash Parameter Table is the main and only mandatory table as
+ * defined by the SFDP (JESD216) specification.
+ * It provides us with the total size (memory density) of the data array and
+ * the number of address bytes for Fast Read, Page Program and Sector Erase
+ * commands.
+ * For Fast READ commands, it also gives the number of mode clock cycles and
+ * wait states (regrouped in the number of dummy clock cycles) for each
+ * supported instruction op code.
+ * For Page Program, the page size is now available since JESD216 rev A, however
+ * the supported instruction op codes are still not provided.
+ * For Sector Erase commands, this table stores the supported instruction op
+ * codes and the associated sector sizes.
+ * Finally, the Quad Enable Requirements (QER) are also available since JESD216
+ * rev A. The QER bits encode the manufacturer dependent procedure to be
+ * executed to set the Quad Enable (QE) bit in some internal register of the
+ * Quad SPI memory. Indeed the QE bit, when it exists, must be set before
+ * sending any Quad SPI command to the memory. Actually, setting the QE bit
+ * tells the memory to reassign its WP# and HOLD#/RESET# pins to functions IO2
+ * and IO3 hence enabling 4 (Quad) I/O lines.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_parse_bfpt(struct spi_nor *nor,
+ const struct sfdp_parameter_header *bfpt_header,
+ struct spi_nor_flash_parameter *params)
+{
+ struct spi_nor_erase_map *map = ¶ms->erase_map;
+ struct spi_nor_erase_type *erase_type = map->erase_type;
+ struct sfdp_bfpt bfpt;
+ size_t len;
+ int i, cmd, err;
+ u32 addr;
+ u16 half;
+ u8 erase_mask;
+
+ /* JESD216 Basic Flash Parameter Table length is at least 9 DWORDs. */
+ if (bfpt_header->length < BFPT_DWORD_MAX_JESD216)
+ return -EINVAL;
+
+ /* Read the Basic Flash Parameter Table. */
+ len = min_t(size_t, sizeof(bfpt),
+ bfpt_header->length * sizeof(u32));
+ addr = SFDP_PARAM_HEADER_PTP(bfpt_header);
+ memset(&bfpt, 0, sizeof(bfpt));
+ err = spi_nor_read_sfdp_dma_unsafe(nor, addr, len, &bfpt);
+ if (err < 0)
+ return err;
+
+ /* Fix endianness of the BFPT DWORDs. */
+ le32_to_cpu_array(bfpt.dwords, BFPT_DWORD_MAX);
+
+ /* Number of address bytes. */
+ switch (bfpt.dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) {
+ case BFPT_DWORD1_ADDRESS_BYTES_3_ONLY:
+ nor->addr_width = 3;
+ break;
+
+ case BFPT_DWORD1_ADDRESS_BYTES_4_ONLY:
+ nor->addr_width = 4;
+ break;
+
+ default:
+ break;
+ }
+
+ /* Flash Memory Density (in bits). */
+ params->size = bfpt.dwords[BFPT_DWORD(2)];
+ if (params->size & BIT(31)) {
+ params->size &= ~BIT(31);
+
+ /*
+ * Prevent overflows on params->size. Anyway, a NOR of 2^64
+ * bits is unlikely to exist so this error probably means
+ * the BFPT we are reading is corrupted/wrong.
+ */
+ if (params->size > 63)
+ return -EINVAL;
+
+ params->size = 1ULL << params->size;
+ } else {
+ params->size++;
+ }
+ params->size >>= 3; /* Convert to bytes. */
+
+ /* Fast Read settings. */
+ for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_reads); i++) {
+ const struct sfdp_bfpt_read *rd = &sfdp_bfpt_reads[i];
+ struct spi_nor_read_command *read;
+
+ if (!(bfpt.dwords[rd->supported_dword] & rd->supported_bit)) {
+ params->hwcaps.mask &= ~rd->hwcaps;
+ continue;
+ }
+
+ params->hwcaps.mask |= rd->hwcaps;
+ cmd = spi_nor_hwcaps_read2cmd(rd->hwcaps);
+ read = ¶ms->reads[cmd];
+ half = bfpt.dwords[rd->settings_dword] >> rd->settings_shift;
+ spi_nor_set_read_settings_from_bfpt(read, half, rd->proto);
+ }
+
+ /*
+ * Sector Erase settings. Reinitialize the uniform erase map using the
+ * Erase Types defined in the bfpt table.
+ */
+ erase_mask = 0;
+ memset(¶ms->erase_map, 0, sizeof(params->erase_map));
+ for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_erases); i++) {
+ const struct sfdp_bfpt_erase *er = &sfdp_bfpt_erases[i];
+ u32 erasesize;
+ u8 opcode;
+
+ half = bfpt.dwords[er->dword] >> er->shift;
+ erasesize = half & 0xff;
+
+ /* erasesize == 0 means this Erase Type is not supported. */
+ if (!erasesize)
+ continue;
+
+ erasesize = 1U << erasesize;
+ opcode = (half >> 8) & 0xff;
+ erase_mask |= BIT(i);
+ spi_nor_set_erase_settings_from_bfpt(&erase_type[i], erasesize,
+ opcode, i);
+ }
+ spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
+ /*
+ * Sort all the map's Erase Types in ascending order with the smallest
+ * erase size being the first member in the erase_type array.
+ */
+ sort(erase_type, SNOR_ERASE_TYPE_MAX, sizeof(erase_type[0]),
+ spi_nor_map_cmp_erase_type, NULL);
+ /*
+ * Sort the erase types in the uniform region in order to update the
+ * uniform_erase_type bitmask. The bitmask will be used later on when
+ * selecting the uniform erase.
+ */
+ spi_nor_regions_sort_erase_types(map);
+ map->uniform_erase_type = map->uniform_region.offset &
+ SNOR_ERASE_TYPE_MASK;
+
+ /* Stop here if not JESD216 rev A or later. */
+ if (bfpt_header->length < BFPT_DWORD_MAX)
+ return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt,
+ params);
+
+ /* Page size: this field specifies 'N' so the page size = 2^N bytes. */
+ params->page_size = bfpt.dwords[BFPT_DWORD(11)];
+ params->page_size &= BFPT_DWORD11_PAGE_SIZE_MASK;
+ params->page_size >>= BFPT_DWORD11_PAGE_SIZE_SHIFT;
+ params->page_size = 1U << params->page_size;
+
+ /* Quad Enable Requirements. */
+ switch (bfpt.dwords[BFPT_DWORD(15)] & BFPT_DWORD15_QER_MASK) {
+ case BFPT_DWORD15_QER_NONE:
+ params->quad_enable = NULL;
+ break;
+
+ case BFPT_DWORD15_QER_SR2_BIT1_BUGGY:
+ /*
+ * Writing only one byte to the Status Register has the
+ * side-effect of clearing Status Register 2.
+ */
+ case BFPT_DWORD15_QER_SR2_BIT1_NO_RD:
+ /*
+ * Read Configuration Register (35h) instruction is not
+ * supported.
+ */
+ nor->flags |= SNOR_F_HAS_16BIT_SR | SNOR_F_NO_READ_CR;
+ params->quad_enable = spi_nor_sr2_bit1_quad_enable;
+ break;
+
+ case BFPT_DWORD15_QER_SR1_BIT6:
+ nor->flags &= ~SNOR_F_HAS_16BIT_SR;
+ params->quad_enable = spi_nor_sr1_bit6_quad_enable;
+ break;
+
+ case BFPT_DWORD15_QER_SR2_BIT7:
+ nor->flags &= ~SNOR_F_HAS_16BIT_SR;
+ params->quad_enable = spi_nor_sr2_bit7_quad_enable;
+ break;
+
+ case BFPT_DWORD15_QER_SR2_BIT1:
+ /*
+ * JESD216 rev B or later does not specify if writing only one
+ * byte to the Status Register clears or not the Status
+ * Register 2, so let's be cautious and keep the default
+ * assumption of a 16-bit Write Status (01h) command.
+ */
+ nor->flags |= SNOR_F_HAS_16BIT_SR;
+
+ params->quad_enable = spi_nor_sr2_bit1_quad_enable;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, params);
+}
+
+/**
+ * spi_nor_smpt_addr_width() - return the address width used in the
+ * configuration detection command.
+ * @nor: pointer to a 'struct spi_nor'
+ * @settings: configuration detection command descriptor, dword1
+ */
+static u8 spi_nor_smpt_addr_width(const struct spi_nor *nor, const u32 settings)
+{
+ switch (settings & SMPT_CMD_ADDRESS_LEN_MASK) {
+ case SMPT_CMD_ADDRESS_LEN_0:
+ return 0;
+ case SMPT_CMD_ADDRESS_LEN_3:
+ return 3;
+ case SMPT_CMD_ADDRESS_LEN_4:
+ return 4;
+ case SMPT_CMD_ADDRESS_LEN_USE_CURRENT:
+ /* fall through */
+ default:
+ return nor->addr_width;
+ }
+}
+
+/**
+ * spi_nor_smpt_read_dummy() - return the configuration detection command read
+ * latency, in clock cycles.
+ * @nor: pointer to a 'struct spi_nor'
+ * @settings: configuration detection command descriptor, dword1
+ *
+ * Return: the number of dummy cycles for an SMPT read
+ */
+static u8 spi_nor_smpt_read_dummy(const struct spi_nor *nor, const u32 settings)
+{
+ u8 read_dummy = SMPT_CMD_READ_DUMMY(settings);
+
+ if (read_dummy == SMPT_CMD_READ_DUMMY_IS_VARIABLE)
+ return nor->read_dummy;
+ return read_dummy;
+}
+
+/**
+ * spi_nor_get_map_in_use() - get the configuration map in use
+ * @nor: pointer to a 'struct spi_nor'
+ * @smpt: pointer to the sector map parameter table
+ * @smpt_len: sector map parameter table length
+ *
+ * Return: pointer to the map in use, ERR_PTR(-errno) otherwise.
+ */
+static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
+ u8 smpt_len)
+{
+ const u32 *ret;
+ u8 *buf;
+ u32 addr;
+ int err;
+ u8 i;
+ u8 addr_width, read_opcode, read_dummy;
+ u8 read_data_mask, map_id;
+
+ /* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */
+ buf = kmalloc(sizeof(*buf), GFP_KERNEL);
+ if (!buf)
+ return ERR_PTR(-ENOMEM);
+
+ addr_width = nor->addr_width;
+ read_dummy = nor->read_dummy;
+ read_opcode = nor->read_opcode;
+
+ map_id = 0;
+ /* Determine if there are any optional Detection Command Descriptors */
+ for (i = 0; i < smpt_len; i += 2) {
+ if (smpt[i] & SMPT_DESC_TYPE_MAP)
+ break;
+
+ read_data_mask = SMPT_CMD_READ_DATA(smpt[i]);
+ nor->addr_width = spi_nor_smpt_addr_width(nor, smpt[i]);
+ nor->read_dummy = spi_nor_smpt_read_dummy(nor, smpt[i]);
+ nor->read_opcode = SMPT_CMD_OPCODE(smpt[i]);
+ addr = smpt[i + 1];
+
+ err = spi_nor_read_raw(nor, addr, 1, buf);
+ if (err) {
+ ret = ERR_PTR(err);
+ goto out;
+ }
+
+ /*
+ * Build an index value that is used to select the Sector Map
+ * Configuration that is currently in use.
+ */
+ map_id = map_id << 1 | !!(*buf & read_data_mask);
+ }
+
+ /*
+ * If command descriptors are provided, they always precede map
+ * descriptors in the table. There is no need to start the iteration
+ * over smpt array all over again.
+ *
+ * Find the matching configuration map.
+ */
+ ret = ERR_PTR(-EINVAL);
+ while (i < smpt_len) {
+ if (SMPT_MAP_ID(smpt[i]) == map_id) {
+ ret = smpt + i;
+ break;
+ }
+
+ /*
+ * If there are no more configuration map descriptors and no
+ * configuration ID matched the configuration identifier, the
+ * sector address map is unknown.
+ */
+ if (smpt[i] & SMPT_DESC_END)
+ break;
+
+ /* increment the table index to the next map */
+ i += SMPT_MAP_REGION_COUNT(smpt[i]) + 1;
+ }
+
+ /* fall through */
+out:
+ kfree(buf);
+ nor->addr_width = addr_width;
+ nor->read_dummy = read_dummy;
+ nor->read_opcode = read_opcode;
+ return ret;
+}
+
+static void spi_nor_region_mark_end(struct spi_nor_erase_region *region)
+{
+ region->offset |= SNOR_LAST_REGION;
+}
+
+static void spi_nor_region_mark_overlay(struct spi_nor_erase_region *region)
+{
+ region->offset |= SNOR_OVERLAID_REGION;
+}
+
+/**
+ * spi_nor_region_check_overlay() - set overlay bit when the region is overlaid
+ * @region: pointer to a structure that describes a SPI NOR erase region
+ * @erase: pointer to a structure that describes a SPI NOR erase type
+ * @erase_type: erase type bitmask
+ */
+static void
+spi_nor_region_check_overlay(struct spi_nor_erase_region *region,
+ const struct spi_nor_erase_type *erase,
+ const u8 erase_type)
+{
+ int i;
+
+ for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
+ if (!(erase_type & BIT(i)))
+ continue;
+ if (region->size & erase[i].size_mask) {
+ spi_nor_region_mark_overlay(region);
+ return;
+ }
+ }
+}
+
+/**
+ * spi_nor_init_non_uniform_erase_map() - initialize the non-uniform erase map
+ * @nor: pointer to a 'struct spi_nor'
+ * @params: pointer to a duplicate 'struct spi_nor_flash_parameter' that is
+ * used for storing SFDP parsed data
+ * @smpt: pointer to the sector map parameter table
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int
+spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
+ struct spi_nor_flash_parameter *params,
+ const u32 *smpt)
+{
+ struct spi_nor_erase_map *map = ¶ms->erase_map;
+ struct spi_nor_erase_type *erase = map->erase_type;
+ struct spi_nor_erase_region *region;
+ u64 offset;
+ u32 region_count;
+ int i, j;
+ u8 uniform_erase_type, save_uniform_erase_type;
+ u8 erase_type, regions_erase_type;
+
+ region_count = SMPT_MAP_REGION_COUNT(*smpt);
+ /*
+ * The regions will be freed when the driver detaches from the
+ * device.
+ */
+ region = devm_kcalloc(nor->dev, region_count, sizeof(*region),
+ GFP_KERNEL);
+ if (!region)
+ return -ENOMEM;
+ map->regions = region;
+
+ uniform_erase_type = 0xff;
+ regions_erase_type = 0;
+ offset = 0;
+ /* Populate regions. */
+ for (i = 0; i < region_count; i++) {
+ j = i + 1; /* index for the region dword */
+ region[i].size = SMPT_MAP_REGION_SIZE(smpt[j]);
+ erase_type = SMPT_MAP_REGION_ERASE_TYPE(smpt[j]);
+ region[i].offset = offset | erase_type;
+
+ spi_nor_region_check_overlay(®ion[i], erase, erase_type);
+
+ /*
+ * Save the erase types that are supported in all regions and
+ * can erase the entire flash memory.
+ */
+ uniform_erase_type &= erase_type;
+
+ /*
+ * regions_erase_type mask will indicate all the erase types
+ * supported in this configuration map.
+ */
+ regions_erase_type |= erase_type;
+
+ offset = (region[i].offset & ~SNOR_ERASE_FLAGS_MASK) +
+ region[i].size;
+ }
+
+ save_uniform_erase_type = map->uniform_erase_type;
+ map->uniform_erase_type = spi_nor_sort_erase_mask(map,
+ uniform_erase_type);
+
+ if (!regions_erase_type) {
+ /*
+ * Roll back to the previous uniform_erase_type mask, SMPT is
+ * broken.
+ */
+ map->uniform_erase_type = save_uniform_erase_type;
+ return -EINVAL;
+ }
+
+ /*
+ * BFPT advertises all the erase types supported by all the possible
+ * map configurations. Mask out the erase types that are not supported
+ * by the current map configuration.
+ */
+ for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++)
+ if (!(regions_erase_type & BIT(erase[i].idx)))
+ spi_nor_set_erase_type(&erase[i], 0, 0xFF);
+
+ spi_nor_region_mark_end(®ion[i - 1]);
+
+ return 0;
+}
+
+/**
+ * spi_nor_parse_smpt() - parse Sector Map Parameter Table
+ * @nor: pointer to a 'struct spi_nor'
+ * @smpt_header: sector map parameter table header
+ * @params: pointer to a duplicate 'struct spi_nor_flash_parameter'
+ * that is used for storing SFDP parsed data
+ *
+ * This table is optional, but when available, we parse it to identify the
+ * location and size of sectors within the main data array of the flash memory
+ * device and to identify which Erase Types are supported by each sector.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_parse_smpt(struct spi_nor *nor,
+ const struct sfdp_parameter_header *smpt_header,
+ struct spi_nor_flash_parameter *params)
+{
+ const u32 *sector_map;
+ u32 *smpt;
+ size_t len;
+ u32 addr;
+ int ret;
+
+ /* Read the Sector Map Parameter Table. */
+ len = smpt_header->length * sizeof(*smpt);
+ smpt = kmalloc(len, GFP_KERNEL);
+ if (!smpt)
+ return -ENOMEM;
+
+ addr = SFDP_PARAM_HEADER_PTP(smpt_header);
+ ret = spi_nor_read_sfdp(nor, addr, len, smpt);
+ if (ret)
+ goto out;
+
+ /* Fix endianness of the SMPT DWORDs. */
+ le32_to_cpu_array(smpt, smpt_header->length);
+
+ sector_map = spi_nor_get_map_in_use(nor, smpt, smpt_header->length);
+ if (IS_ERR(sector_map)) {
+ ret = PTR_ERR(sector_map);
+ goto out;
+ }
+
+ ret = spi_nor_init_non_uniform_erase_map(nor, params, sector_map);
+ if (ret)
+ goto out;
+
+ spi_nor_regions_sort_erase_types(¶ms->erase_map);
+ /* fall through */
+out:
+ kfree(smpt);
+ return ret;
+}
+
+/**
+ * spi_nor_parse_4bait() - parse the 4-Byte Address Instruction Table
+ * @nor: pointer to a 'struct spi_nor'.
+ * @param_header: pointer to the 'struct sfdp_parameter_header' describing
+ * the 4-Byte Address Instruction Table length and version.
+ * @params: pointer to the 'struct spi_nor_flash_parameter' to be.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_parse_4bait(struct spi_nor *nor,
+ const struct sfdp_parameter_header *param_header,
+ struct spi_nor_flash_parameter *params)
+{
+ static const struct sfdp_4bait reads[] = {
+ { SNOR_HWCAPS_READ, BIT(0) },
+ { SNOR_HWCAPS_READ_FAST, BIT(1) },
+ { SNOR_HWCAPS_READ_1_1_2, BIT(2) },
+ { SNOR_HWCAPS_READ_1_2_2, BIT(3) },
+ { SNOR_HWCAPS_READ_1_1_4, BIT(4) },
+ { SNOR_HWCAPS_READ_1_4_4, BIT(5) },
+ { SNOR_HWCAPS_READ_1_1_1_DTR, BIT(13) },
+ { SNOR_HWCAPS_READ_1_2_2_DTR, BIT(14) },
+ { SNOR_HWCAPS_READ_1_4_4_DTR, BIT(15) },
+ };
+ static const struct sfdp_4bait programs[] = {
+ { SNOR_HWCAPS_PP, BIT(6) },
+ { SNOR_HWCAPS_PP_1_1_4, BIT(7) },
+ { SNOR_HWCAPS_PP_1_4_4, BIT(8) },
+ };
+ static const struct sfdp_4bait erases[SNOR_ERASE_TYPE_MAX] = {
+ { 0u /* not used */, BIT(9) },
+ { 0u /* not used */, BIT(10) },
+ { 0u /* not used */, BIT(11) },
+ { 0u /* not used */, BIT(12) },
+ };
+ struct spi_nor_pp_command *params_pp = params->page_programs;
+ struct spi_nor_erase_map *map = ¶ms->erase_map;
+ struct spi_nor_erase_type *erase_type = map->erase_type;
+ u32 *dwords;
+ size_t len;
+ u32 addr, discard_hwcaps, read_hwcaps, pp_hwcaps, erase_mask;
+ int i, ret;
+
+ if (param_header->major != SFDP_JESD216_MAJOR ||
+ param_header->length < SFDP_4BAIT_DWORD_MAX)
+ return -EINVAL;
+
+ /* Read the 4-byte Address Instruction Table. */
+ len = sizeof(*dwords) * SFDP_4BAIT_DWORD_MAX;
+
+ /* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */
+ dwords = kmalloc(len, GFP_KERNEL);
+ if (!dwords)
+ return -ENOMEM;
+
+ addr = SFDP_PARAM_HEADER_PTP(param_header);
+ ret = spi_nor_read_sfdp(nor, addr, len, dwords);
+ if (ret)
+ goto out;
+
+ /* Fix endianness of the 4BAIT DWORDs. */
+ le32_to_cpu_array(dwords, SFDP_4BAIT_DWORD_MAX);
+
+ /*
+ * Compute the subset of (Fast) Read commands for which the 4-byte
+ * version is supported.
+ */
+ discard_hwcaps = 0;
+ read_hwcaps = 0;
+ for (i = 0; i < ARRAY_SIZE(reads); i++) {
+ const struct sfdp_4bait *read = &reads[i];
+
+ discard_hwcaps |= read->hwcaps;
+ if ((params->hwcaps.mask & read->hwcaps) &&
+ (dwords[0] & read->supported_bit))
+ read_hwcaps |= read->hwcaps;
+ }
+
+ /*
+ * Compute the subset of Page Program commands for which the 4-byte
+ * version is supported.
+ */
+ pp_hwcaps = 0;
+ for (i = 0; i < ARRAY_SIZE(programs); i++) {
+ const struct sfdp_4bait *program = &programs[i];
+
+ /*
+ * The 4 Byte Address Instruction (Optional) Table is the only
+ * SFDP table that indicates support for Page Program Commands.
+ * Bypass the params->hwcaps.mask and consider 4BAIT the biggest
+ * authority for specifying Page Program support.
+ */
+ discard_hwcaps |= program->hwcaps;
+ if (dwords[0] & program->supported_bit)
+ pp_hwcaps |= program->hwcaps;
+ }
+
+ /*
+ * Compute the subset of Sector Erase commands for which the 4-byte
+ * version is supported.
+ */
+ erase_mask = 0;
+ for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
+ const struct sfdp_4bait *erase = &erases[i];
+
+ if (dwords[0] & erase->supported_bit)
+ erase_mask |= BIT(i);
+ }
+
+ /* Replicate the sort done for the map's erase types in BFPT. */
+ erase_mask = spi_nor_sort_erase_mask(map, erase_mask);
+
+ /*
+ * We need at least one 4-byte op code per read, program and erase
+ * operation; the .read(), .write() and .erase() hooks share the
+ * nor->addr_width value.
+ */
+ if (!read_hwcaps || !pp_hwcaps || !erase_mask)
+ goto out;
+
+ /*
+ * Discard all operations from the 4-byte instruction set which are
+ * not supported by this memory.
+ */
+ params->hwcaps.mask &= ~discard_hwcaps;
+ params->hwcaps.mask |= (read_hwcaps | pp_hwcaps);
+
+ /* Use the 4-byte address instruction set. */
+ for (i = 0; i < SNOR_CMD_READ_MAX; i++) {
+ struct spi_nor_read_command *read_cmd = ¶ms->reads[i];
+
+ read_cmd->opcode = spi_nor_convert_3to4_read(read_cmd->opcode);
+ }
+
+ /* 4BAIT is the only SFDP table that indicates page program support. */
+ if (pp_hwcaps & SNOR_HWCAPS_PP)
+ spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP],
+ SPINOR_OP_PP_4B, SNOR_PROTO_1_1_1);
+ if (pp_hwcaps & SNOR_HWCAPS_PP_1_1_4)
+ spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP_1_1_4],
+ SPINOR_OP_PP_1_1_4_4B,
+ SNOR_PROTO_1_1_4);
+ if (pp_hwcaps & SNOR_HWCAPS_PP_1_4_4)
+ spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP_1_4_4],
+ SPINOR_OP_PP_1_4_4_4B,
+ SNOR_PROTO_1_4_4);
+
+ for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
+ if (erase_mask & BIT(i))
+ erase_type[i].opcode = (dwords[1] >>
+ erase_type[i].idx * 8) & 0xFF;
+ else
+ spi_nor_set_erase_type(&erase_type[i], 0u, 0xFF);
+ }
+
+ /*
+ * We set SNOR_F_HAS_4BAIT in order to skip spi_nor_set_4byte_opcodes()
+ * later because we already did the conversion to 4byte opcodes. Also,
+ * this latest function implements a legacy quirk for the erase size of
+ * Spansion memory. However this quirk is no longer needed with new
+ * SFDP compliant memories.
+ */
+ nor->addr_width = 4;
+ nor->flags |= SNOR_F_4B_OPCODES | SNOR_F_HAS_4BAIT;
+
+ /* fall through */
+out:
+ kfree(dwords);
+ return ret;
+}
+
+/**
+ * spi_nor_parse_sfdp() - parse the Serial Flash Discoverable Parameters.
+ * @nor: pointer to a 'struct spi_nor'
+ * @params: pointer to the 'struct spi_nor_flash_parameter' to be
+ * filled
+ *
+ * The Serial Flash Discoverable Parameters are described by the JEDEC JESD216
+ * specification. This is a standard which tends to supported by almost all
+ * (Q)SPI memory manufacturers. Those hard-coded tables allow us to learn at
+ * runtime the main parameters needed to perform basic SPI flash operations such
+ * as Fast Read, Page Program or Sector Erase commands.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_parse_sfdp(struct spi_nor *nor,
+ struct spi_nor_flash_parameter *params)
+{
+ const struct sfdp_parameter_header *param_header, *bfpt_header;
+ struct sfdp_parameter_header *param_headers = NULL;
+ struct sfdp_header header;
+ struct device *dev = nor->dev;
+ size_t psize;
+ int i, err;
+
+ /* Get the SFDP header. */
+ err = spi_nor_read_sfdp_dma_unsafe(nor, 0, sizeof(header), &header);
+ if (err < 0)
+ return err;
+
+ /* Check the SFDP header version. */
+ if (le32_to_cpu(header.signature) != SFDP_SIGNATURE ||
+ header.major != SFDP_JESD216_MAJOR)
+ return -EINVAL;
+
+ /*
+ * Verify that the first and only mandatory parameter header is a
+ * Basic Flash Parameter Table header as specified in JESD216.
+ */
+ bfpt_header = &header.bfpt_header;
+ if (SFDP_PARAM_HEADER_ID(bfpt_header) != SFDP_BFPT_ID ||
+ bfpt_header->major != SFDP_JESD216_MAJOR)
+ return -EINVAL;
+
+ /*
+ * Allocate memory then read all parameter headers with a single
+ * Read SFDP command. These parameter headers will actually be parsed
+ * twice: a first time to get the latest revision of the basic flash
+ * parameter table, then a second time to handle the supported optional
+ * tables.
+ * Hence we read the parameter headers once for all to reduce the
+ * processing time. Also we use kmalloc() instead of devm_kmalloc()
+ * because we don't need to keep these parameter headers: the allocated
+ * memory is always released with kfree() before exiting this function.
+ */
+ if (header.nph) {
+ psize = header.nph * sizeof(*param_headers);
+
+ param_headers = kmalloc(psize, GFP_KERNEL);
+ if (!param_headers)
+ return -ENOMEM;
+
+ err = spi_nor_read_sfdp(nor, sizeof(header),
+ psize, param_headers);
+ if (err < 0) {
+ dev_dbg(dev, "failed to read SFDP parameter headers\n");
+ goto exit;
+ }
+ }
+
+ /*
+ * Check other parameter headers to get the latest revision of
+ * the basic flash parameter table.
+ */
+ for (i = 0; i < header.nph; i++) {
+ param_header = ¶m_headers[i];
+
+ if (SFDP_PARAM_HEADER_ID(param_header) == SFDP_BFPT_ID &&
+ param_header->major == SFDP_JESD216_MAJOR &&
+ (param_header->minor > bfpt_header->minor ||
+ (param_header->minor == bfpt_header->minor &&
+ param_header->length > bfpt_header->length)))
+ bfpt_header = param_header;
+ }
+
+ err = spi_nor_parse_bfpt(nor, bfpt_header, params);
+ if (err)
+ goto exit;
+
+ /* Parse optional parameter tables. */
+ for (i = 0; i < header.nph; i++) {
+ param_header = ¶m_headers[i];
+
+ switch (SFDP_PARAM_HEADER_ID(param_header)) {
+ case SFDP_SECTOR_MAP_ID:
+ err = spi_nor_parse_smpt(nor, param_header, params);
+ break;
+
+ case SFDP_4BAIT_ID:
+ err = spi_nor_parse_4bait(nor, param_header, params);
+ break;
+
+ default:
+ break;
+ }
+
+ if (err) {
+ dev_warn(dev, "Failed to parse optional parameter table: %04x\n",
+ SFDP_PARAM_HEADER_ID(param_header));
+ /*
+ * Let's not drop all information we extracted so far
+ * if optional table parsers fail. In case of failing,
+ * each optional parser is responsible to roll back to
+ * the previously known spi_nor data.
+ */
+ err = 0;
+ }
+ }
+
+exit:
+ kfree(param_headers);
+ return err;
+}
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#ifndef __LINUX_MTD_SFDP_H
+#define __LINUX_MTD_SFDP_H
+
+/* Basic Flash Parameter Table */
+
+/*
+ * JESD216 rev B defines a Basic Flash Parameter Table of 16 DWORDs.
+ * They are indexed from 1 but C arrays are indexed from 0.
+ */
+#define BFPT_DWORD(i) ((i) - 1)
+#define BFPT_DWORD_MAX 16
+
+struct sfdp_bfpt {
+ u32 dwords[BFPT_DWORD_MAX];
+};
+
+/* The first version of JESD216 defined only 9 DWORDs. */
+#define BFPT_DWORD_MAX_JESD216 9
+
+/* 1st DWORD. */
+#define BFPT_DWORD1_FAST_READ_1_1_2 BIT(16)
+#define BFPT_DWORD1_ADDRESS_BYTES_MASK GENMASK(18, 17)
+#define BFPT_DWORD1_ADDRESS_BYTES_3_ONLY (0x0UL << 17)
+#define BFPT_DWORD1_ADDRESS_BYTES_3_OR_4 (0x1UL << 17)
+#define BFPT_DWORD1_ADDRESS_BYTES_4_ONLY (0x2UL << 17)
+#define BFPT_DWORD1_DTR BIT(19)
+#define BFPT_DWORD1_FAST_READ_1_2_2 BIT(20)
+#define BFPT_DWORD1_FAST_READ_1_4_4 BIT(21)
+#define BFPT_DWORD1_FAST_READ_1_1_4 BIT(22)
+
+/* 5th DWORD. */
+#define BFPT_DWORD5_FAST_READ_2_2_2 BIT(0)
+#define BFPT_DWORD5_FAST_READ_4_4_4 BIT(4)
+
+/* 11th DWORD. */
+#define BFPT_DWORD11_PAGE_SIZE_SHIFT 4
+#define BFPT_DWORD11_PAGE_SIZE_MASK GENMASK(7, 4)
+
+/* 15th DWORD. */
+
+/*
+ * (from JESD216 rev B)
+ * Quad Enable Requirements (QER):
+ * - 000b: Device does not have a QE bit. Device detects 1-1-4 and 1-4-4
+ * reads based on instruction. DQ3/HOLD# functions are hold during
+ * instruction phase.
+ * - 001b: QE is bit 1 of status register 2. It is set via Write Status with
+ * two data bytes where bit 1 of the second byte is one.
+ * [...]
+ * Writing only one byte to the status register has the side-effect of
+ * clearing status register 2, including the QE bit. The 100b code is
+ * used if writing one byte to the status register does not modify
+ * status register 2.
+ * - 010b: QE is bit 6 of status register 1. It is set via Write Status with
+ * one data byte where bit 6 is one.
+ * [...]
+ * - 011b: QE is bit 7 of status register 2. It is set via Write status
+ * register 2 instruction 3Eh with one data byte where bit 7 is one.
+ * [...]
+ * The status register 2 is read using instruction 3Fh.
+ * - 100b: QE is bit 1 of status register 2. It is set via Write Status with
+ * two data bytes where bit 1 of the second byte is one.
+ * [...]
+ * In contrast to the 001b code, writing one byte to the status
+ * register does not modify status register 2.
+ * - 101b: QE is bit 1 of status register 2. Status register 1 is read using
+ * Read Status instruction 05h. Status register2 is read using
+ * instruction 35h. QE is set via Write Status instruction 01h with
+ * two data bytes where bit 1 of the second byte is one.
+ * [...]
+ */
+#define BFPT_DWORD15_QER_MASK GENMASK(22, 20)
+#define BFPT_DWORD15_QER_NONE (0x0UL << 20) /* Micron */
+#define BFPT_DWORD15_QER_SR2_BIT1_BUGGY (0x1UL << 20)
+#define BFPT_DWORD15_QER_SR1_BIT6 (0x2UL << 20) /* Macronix */
+#define BFPT_DWORD15_QER_SR2_BIT7 (0x3UL << 20)
+#define BFPT_DWORD15_QER_SR2_BIT1_NO_RD (0x4UL << 20)
+#define BFPT_DWORD15_QER_SR2_BIT1 (0x5UL << 20) /* Spansion */
+
+struct sfdp_parameter_header {
+ u8 id_lsb;
+ u8 minor;
+ u8 major;
+ u8 length; /* in double words */
+ u8 parameter_table_pointer[3]; /* byte address */
+ u8 id_msb;
+};
+
+int spi_nor_parse_sfdp(struct spi_nor *nor,
+ struct spi_nor_flash_parameter *params);
+
+#endif /* __LINUX_MTD_SFDP_H */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info spansion_parts[] = {
+ /* Spansion/Cypress -- single (large) sector size only, at least
+ * for the chips listed here (without boot sectors).
+ */
+ { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl128s0", INFO6(0x012018, 0x4d0080, 256 * 1024, 64,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ USE_CLSR) },
+ { "s25fl128s1", INFO6(0x012018, 0x4d0180, 64 * 1024, 256,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ USE_CLSR) },
+ { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, USE_CLSR) },
+ { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ USE_CLSR) },
+ { "s25fl512s", INFO6(0x010220, 0x4d0080, 256 * 1024, 256,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | USE_CLSR) },
+ { "s25fs512s", INFO6(0x010220, 0x4d0081, 256 * 1024, 256,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ USE_CLSR) },
+ { "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
+ { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) },
+ { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) },
+ { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ USE_CLSR) },
+ { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256,
+ SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ USE_CLSR) },
+ { "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) },
+ { "s25sl008a", INFO(0x010213, 0, 64 * 1024, 16, 0) },
+ { "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32, 0) },
+ { "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64, 0) },
+ { "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128, 0) },
+ { "s25fl004k", INFO(0xef4013, 0, 64 * 1024, 8,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
+ { "s25fl116k", INFO(0x014015, 0, 64 * 1024, 32,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "s25fl132k", INFO(0x014016, 0, 64 * 1024, 64, SECT_4K) },
+ { "s25fl164k", INFO(0x014017, 0, 64 * 1024, 128, SECT_4K) },
+ { "s25fl204k", INFO(0x014013, 0, 64 * 1024, 8,
+ SECT_4K | SPI_NOR_DUAL_READ) },
+ { "s25fl208k", INFO(0x014014, 0, 64 * 1024, 16,
+ SECT_4K | SPI_NOR_DUAL_READ) },
+ { "s25fl064l", INFO(0x016017, 0, 64 * 1024, 128,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_4B_OPCODES) },
+ { "s25fl128l", INFO(0x016018, 0, 64 * 1024, 256,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_4B_OPCODES) },
+ { "s25fl256l", INFO(0x016019, 0, 64 * 1024, 512,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_4B_OPCODES) },
+};
+
+static void spansion_post_sfdp_fixups(struct spi_nor *nor)
+{
+ if (nor->params->size <= SZ_16M)
+ return;
+
+ nor->flags |= SNOR_F_4B_OPCODES;
+ /* No small sector erase for 4-byte command set */
+ nor->erase_opcode = SPINOR_OP_SE;
+ nor->mtd.erasesize = nor->info->sector_size;
+}
+
+static const struct spi_nor_fixups spansion_fixups = {
+ .post_sfdp = spansion_post_sfdp_fixups,
+};
+
+const struct spi_nor_manufacturer spi_nor_spansion = {
+ .name = "spansion",
+ .parts = spansion_parts,
+ .nparts = ARRAY_SIZE(spansion_parts),
+ .fixups = &spansion_fixups,
+};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Based on m25p80.c, by Mike Lavender (mike@steroidmicros.com), with
- * influence from lart.c (Abraham Van Der Merwe) and mtd_dataflash.c
- *
- * Copyright (C) 2005, Intec Automation Inc.
- * Copyright (C) 2014, Freescale Semiconductor, Inc.
- */
-
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/mutex.h>
-#include <linux/math64.h>
-#include <linux/sizes.h>
-#include <linux/slab.h>
-#include <linux/sort.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/of_platform.h>
-#include <linux/sched/task_stack.h>
-#include <linux/spi/flash.h>
-#include <linux/mtd/spi-nor.h>
-
-/* Define max times to check status register before we give up. */
-
-/*
- * For everything but full-chip erase; probably could be much smaller, but kept
- * around for safety for now
- */
-#define DEFAULT_READY_WAIT_JIFFIES (40UL * HZ)
-
-/*
- * For full-chip erase, calibrated to a 2MB flash (M25P16); should be scaled up
- * for larger flash
- */
-#define CHIP_ERASE_2MB_READY_WAIT_JIFFIES (40UL * HZ)
-
-#define SPI_NOR_MAX_ID_LEN 6
-#define SPI_NOR_MAX_ADDR_WIDTH 4
-
-struct sfdp_parameter_header {
- u8 id_lsb;
- u8 minor;
- u8 major;
- u8 length; /* in double words */
- u8 parameter_table_pointer[3]; /* byte address */
- u8 id_msb;
-};
-
-#define SFDP_PARAM_HEADER_ID(p) (((p)->id_msb << 8) | (p)->id_lsb)
-#define SFDP_PARAM_HEADER_PTP(p) \
- (((p)->parameter_table_pointer[2] << 16) | \
- ((p)->parameter_table_pointer[1] << 8) | \
- ((p)->parameter_table_pointer[0] << 0))
-
-#define SFDP_BFPT_ID 0xff00 /* Basic Flash Parameter Table */
-#define SFDP_SECTOR_MAP_ID 0xff81 /* Sector Map Table */
-#define SFDP_4BAIT_ID 0xff84 /* 4-byte Address Instruction Table */
-
-#define SFDP_SIGNATURE 0x50444653U
-#define SFDP_JESD216_MAJOR 1
-#define SFDP_JESD216_MINOR 0
-#define SFDP_JESD216A_MINOR 5
-#define SFDP_JESD216B_MINOR 6
-
-struct sfdp_header {
- u32 signature; /* Ox50444653U <=> "SFDP" */
- u8 minor;
- u8 major;
- u8 nph; /* 0-base number of parameter headers */
- u8 unused;
-
- /* Basic Flash Parameter Table. */
- struct sfdp_parameter_header bfpt_header;
-};
-
-/* Basic Flash Parameter Table */
-
-/*
- * JESD216 rev B defines a Basic Flash Parameter Table of 16 DWORDs.
- * They are indexed from 1 but C arrays are indexed from 0.
- */
-#define BFPT_DWORD(i) ((i) - 1)
-#define BFPT_DWORD_MAX 16
-
-/* The first version of JESD216 defined only 9 DWORDs. */
-#define BFPT_DWORD_MAX_JESD216 9
-
-/* 1st DWORD. */
-#define BFPT_DWORD1_FAST_READ_1_1_2 BIT(16)
-#define BFPT_DWORD1_ADDRESS_BYTES_MASK GENMASK(18, 17)
-#define BFPT_DWORD1_ADDRESS_BYTES_3_ONLY (0x0UL << 17)
-#define BFPT_DWORD1_ADDRESS_BYTES_3_OR_4 (0x1UL << 17)
-#define BFPT_DWORD1_ADDRESS_BYTES_4_ONLY (0x2UL << 17)
-#define BFPT_DWORD1_DTR BIT(19)
-#define BFPT_DWORD1_FAST_READ_1_2_2 BIT(20)
-#define BFPT_DWORD1_FAST_READ_1_4_4 BIT(21)
-#define BFPT_DWORD1_FAST_READ_1_1_4 BIT(22)
-
-/* 5th DWORD. */
-#define BFPT_DWORD5_FAST_READ_2_2_2 BIT(0)
-#define BFPT_DWORD5_FAST_READ_4_4_4 BIT(4)
-
-/* 11th DWORD. */
-#define BFPT_DWORD11_PAGE_SIZE_SHIFT 4
-#define BFPT_DWORD11_PAGE_SIZE_MASK GENMASK(7, 4)
-
-/* 15th DWORD. */
-
-/*
- * (from JESD216 rev B)
- * Quad Enable Requirements (QER):
- * - 000b: Device does not have a QE bit. Device detects 1-1-4 and 1-4-4
- * reads based on instruction. DQ3/HOLD# functions are hold during
- * instruction phase.
- * - 001b: QE is bit 1 of status register 2. It is set via Write Status with
- * two data bytes where bit 1 of the second byte is one.
- * [...]
- * Writing only one byte to the status register has the side-effect of
- * clearing status register 2, including the QE bit. The 100b code is
- * used if writing one byte to the status register does not modify
- * status register 2.
- * - 010b: QE is bit 6 of status register 1. It is set via Write Status with
- * one data byte where bit 6 is one.
- * [...]
- * - 011b: QE is bit 7 of status register 2. It is set via Write status
- * register 2 instruction 3Eh with one data byte where bit 7 is one.
- * [...]
- * The status register 2 is read using instruction 3Fh.
- * - 100b: QE is bit 1 of status register 2. It is set via Write Status with
- * two data bytes where bit 1 of the second byte is one.
- * [...]
- * In contrast to the 001b code, writing one byte to the status
- * register does not modify status register 2.
- * - 101b: QE is bit 1 of status register 2. Status register 1 is read using
- * Read Status instruction 05h. Status register2 is read using
- * instruction 35h. QE is set via Write Status instruction 01h with
- * two data bytes where bit 1 of the second byte is one.
- * [...]
- */
-#define BFPT_DWORD15_QER_MASK GENMASK(22, 20)
-#define BFPT_DWORD15_QER_NONE (0x0UL << 20) /* Micron */
-#define BFPT_DWORD15_QER_SR2_BIT1_BUGGY (0x1UL << 20)
-#define BFPT_DWORD15_QER_SR1_BIT6 (0x2UL << 20) /* Macronix */
-#define BFPT_DWORD15_QER_SR2_BIT7 (0x3UL << 20)
-#define BFPT_DWORD15_QER_SR2_BIT1_NO_RD (0x4UL << 20)
-#define BFPT_DWORD15_QER_SR2_BIT1 (0x5UL << 20) /* Spansion */
-
-struct sfdp_bfpt {
- u32 dwords[BFPT_DWORD_MAX];
-};
-
-/**
- * struct spi_nor_fixups - SPI NOR fixup hooks
- * @default_init: called after default flash parameters init. Used to tweak
- * flash parameters when information provided by the flash_info
- * table is incomplete or wrong.
- * @post_bfpt: called after the BFPT table has been parsed
- * @post_sfdp: called after SFDP has been parsed (is also called for SPI NORs
- * that do not support RDSFDP). Typically used to tweak various
- * parameters that could not be extracted by other means (i.e.
- * when information provided by the SFDP/flash_info tables are
- * incomplete or wrong).
- *
- * Those hooks can be used to tweak the SPI NOR configuration when the SFDP
- * table is broken or not available.
- */
-struct spi_nor_fixups {
- void (*default_init)(struct spi_nor *nor);
- int (*post_bfpt)(struct spi_nor *nor,
- const struct sfdp_parameter_header *bfpt_header,
- const struct sfdp_bfpt *bfpt,
- struct spi_nor_flash_parameter *params);
- void (*post_sfdp)(struct spi_nor *nor);
-};
-
-struct flash_info {
- char *name;
-
- /*
- * This array stores the ID bytes.
- * The first three bytes are the JEDIC ID.
- * JEDEC ID zero means "no ID" (mostly older chips).
- */
- u8 id[SPI_NOR_MAX_ID_LEN];
- u8 id_len;
-
- /* The size listed here is what works with SPINOR_OP_SE, which isn't
- * necessarily called a "sector" by the vendor.
- */
- unsigned sector_size;
- u16 n_sectors;
-
- u16 page_size;
- u16 addr_width;
-
- u32 flags;
-#define SECT_4K BIT(0) /* SPINOR_OP_BE_4K works uniformly */
-#define SPI_NOR_NO_ERASE BIT(1) /* No erase command needed */
-#define SST_WRITE BIT(2) /* use SST byte programming */
-#define SPI_NOR_NO_FR BIT(3) /* Can't do fastread */
-#define SECT_4K_PMC BIT(4) /* SPINOR_OP_BE_4K_PMC works uniformly */
-#define SPI_NOR_DUAL_READ BIT(5) /* Flash supports Dual Read */
-#define SPI_NOR_QUAD_READ BIT(6) /* Flash supports Quad Read */
-#define USE_FSR BIT(7) /* use flag status register */
-#define SPI_NOR_HAS_LOCK BIT(8) /* Flash supports lock/unlock via SR */
-#define SPI_NOR_HAS_TB BIT(9) /*
- * Flash SR has Top/Bottom (TB) protect
- * bit. Must be used with
- * SPI_NOR_HAS_LOCK.
- */
-#define SPI_NOR_XSR_RDY BIT(10) /*
- * S3AN flashes have specific opcode to
- * read the status register.
- * Flags SPI_NOR_XSR_RDY and SPI_S3AN
- * use the same bit as one implies the
- * other, but we will get rid of
- * SPI_S3AN soon.
- */
-#define SPI_S3AN BIT(10) /*
- * Xilinx Spartan 3AN In-System Flash
- * (MFR cannot be used for probing
- * because it has the same value as
- * ATMEL flashes)
- */
-#define SPI_NOR_4B_OPCODES BIT(11) /*
- * Use dedicated 4byte address op codes
- * to support memory size above 128Mib.
- */
-#define NO_CHIP_ERASE BIT(12) /* Chip does not support chip erase */
-#define SPI_NOR_SKIP_SFDP BIT(13) /* Skip parsing of SFDP tables */
-#define USE_CLSR BIT(14) /* use CLSR command */
-#define SPI_NOR_OCTAL_READ BIT(15) /* Flash supports Octal Read */
-#define SPI_NOR_TB_SR_BIT6 BIT(16) /*
- * Top/Bottom (TB) is bit 6 of
- * status register. Must be used with
- * SPI_NOR_HAS_TB.
- */
-
- /* Part specific fixup hooks. */
- const struct spi_nor_fixups *fixups;
-};
-
-#define JEDEC_MFR(info) ((info)->id[0])
-
-/**
- * spi_nor_spimem_xfer_data() - helper function to read/write data to
- * flash's memory region
- * @nor: pointer to 'struct spi_nor'
- * @op: pointer to 'struct spi_mem_op' template for transfer
- *
- * Return: number of bytes transferred on success, -errno otherwise
- */
-static ssize_t spi_nor_spimem_xfer_data(struct spi_nor *nor,
- struct spi_mem_op *op)
-{
- bool usebouncebuf = false;
- void *rdbuf = NULL;
- const void *buf;
- int ret;
-
- if (op->data.dir == SPI_MEM_DATA_IN)
- buf = op->data.buf.in;
- else
- buf = op->data.buf.out;
-
- if (object_is_on_stack(buf) || !virt_addr_valid(buf))
- usebouncebuf = true;
-
- if (usebouncebuf) {
- if (op->data.nbytes > nor->bouncebuf_size)
- op->data.nbytes = nor->bouncebuf_size;
-
- if (op->data.dir == SPI_MEM_DATA_IN) {
- rdbuf = op->data.buf.in;
- op->data.buf.in = nor->bouncebuf;
- } else {
- op->data.buf.out = nor->bouncebuf;
- memcpy(nor->bouncebuf, buf,
- op->data.nbytes);
- }
- }
-
- ret = spi_mem_adjust_op_size(nor->spimem, op);
- if (ret)
- return ret;
-
- ret = spi_mem_exec_op(nor->spimem, op);
- if (ret)
- return ret;
-
- if (usebouncebuf && op->data.dir == SPI_MEM_DATA_IN)
- memcpy(rdbuf, nor->bouncebuf, op->data.nbytes);
-
- return op->data.nbytes;
-}
-
-/**
- * spi_nor_spimem_read_data() - read data from flash's memory region via
- * spi-mem
- * @nor: pointer to 'struct spi_nor'
- * @from: offset to read from
- * @len: number of bytes to read
- * @buf: pointer to dst buffer
- *
- * Return: number of bytes read successfully, -errno otherwise
- */
-static ssize_t spi_nor_spimem_read_data(struct spi_nor *nor, loff_t from,
- size_t len, u8 *buf)
-{
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 1),
- SPI_MEM_OP_ADDR(nor->addr_width, from, 1),
- SPI_MEM_OP_DUMMY(nor->read_dummy, 1),
- SPI_MEM_OP_DATA_IN(len, buf, 1));
-
- /* get transfer protocols. */
- op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto);
- op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto);
- op.dummy.buswidth = op.addr.buswidth;
- op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto);
-
- /* convert the dummy cycles to the number of bytes */
- op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8;
-
- return spi_nor_spimem_xfer_data(nor, &op);
-}
-
-/**
- * spi_nor_read_data() - read data from flash memory
- * @nor: pointer to 'struct spi_nor'
- * @from: offset to read from
- * @len: number of bytes to read
- * @buf: pointer to dst buffer
- *
- * Return: number of bytes read successfully, -errno otherwise
- */
-static ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len,
- u8 *buf)
-{
- if (nor->spimem)
- return spi_nor_spimem_read_data(nor, from, len, buf);
-
- return nor->controller_ops->read(nor, from, len, buf);
-}
-
-/**
- * spi_nor_spimem_write_data() - write data to flash memory via
- * spi-mem
- * @nor: pointer to 'struct spi_nor'
- * @to: offset to write to
- * @len: number of bytes to write
- * @buf: pointer to src buffer
- *
- * Return: number of bytes written successfully, -errno otherwise
- */
-static ssize_t spi_nor_spimem_write_data(struct spi_nor *nor, loff_t to,
- size_t len, const u8 *buf)
-{
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 1),
- SPI_MEM_OP_ADDR(nor->addr_width, to, 1),
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_DATA_OUT(len, buf, 1));
-
- op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto);
- op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto);
- op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto);
-
- if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second)
- op.addr.nbytes = 0;
-
- return spi_nor_spimem_xfer_data(nor, &op);
-}
-
-/**
- * spi_nor_write_data() - write data to flash memory
- * @nor: pointer to 'struct spi_nor'
- * @to: offset to write to
- * @len: number of bytes to write
- * @buf: pointer to src buffer
- *
- * Return: number of bytes written successfully, -errno otherwise
- */
-static ssize_t spi_nor_write_data(struct spi_nor *nor, loff_t to, size_t len,
- const u8 *buf)
-{
- if (nor->spimem)
- return spi_nor_spimem_write_data(nor, to, len, buf);
-
- return nor->controller_ops->write(nor, to, len, buf);
-}
-
-/**
- * spi_nor_write_enable() - Set write enable latch with Write Enable command.
- * @nor: pointer to 'struct spi_nor'.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_write_enable(struct spi_nor *nor)
-{
- int ret;
-
- if (nor->spimem) {
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREN, 1),
- SPI_MEM_OP_NO_ADDR,
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_NO_DATA);
-
- ret = spi_mem_exec_op(nor->spimem, &op);
- } else {
- ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WREN,
- NULL, 0);
- }
-
- if (ret)
- dev_dbg(nor->dev, "error %d on Write Enable\n", ret);
-
- return ret;
-}
-
-/**
- * spi_nor_write_disable() - Send Write Disable instruction to the chip.
- * @nor: pointer to 'struct spi_nor'.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_write_disable(struct spi_nor *nor)
-{
- int ret;
-
- if (nor->spimem) {
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRDI, 1),
- SPI_MEM_OP_NO_ADDR,
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_NO_DATA);
-
- ret = spi_mem_exec_op(nor->spimem, &op);
- } else {
- ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WRDI,
- NULL, 0);
- }
-
- if (ret)
- dev_dbg(nor->dev, "error %d on Write Disable\n", ret);
-
- return ret;
-}
-
-/**
- * spi_nor_read_sr() - Read the Status Register.
- * @nor: pointer to 'struct spi_nor'.
- * @sr: pointer to a DMA-able buffer where the value of the
- * Status Register will be written.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_read_sr(struct spi_nor *nor, u8 *sr)
-{
- int ret;
-
- if (nor->spimem) {
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR, 1),
- SPI_MEM_OP_NO_ADDR,
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_DATA_IN(1, sr, 1));
-
- ret = spi_mem_exec_op(nor->spimem, &op);
- } else {
- ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDSR,
- sr, 1);
- }
-
- if (ret)
- dev_dbg(nor->dev, "error %d reading SR\n", ret);
-
- return ret;
-}
-
-/**
- * spi_nor_read_fsr() - Read the Flag Status Register.
- * @nor: pointer to 'struct spi_nor'
- * @fsr: pointer to a DMA-able buffer where the value of the
- * Flag Status Register will be written.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_read_fsr(struct spi_nor *nor, u8 *fsr)
-{
- int ret;
-
- if (nor->spimem) {
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDFSR, 1),
- SPI_MEM_OP_NO_ADDR,
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_DATA_IN(1, fsr, 1));
-
- ret = spi_mem_exec_op(nor->spimem, &op);
- } else {
- ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDFSR,
- fsr, 1);
- }
-
- if (ret)
- dev_dbg(nor->dev, "error %d reading FSR\n", ret);
-
- return ret;
-}
-
-/**
- * spi_nor_read_cr() - Read the Configuration Register using the
- * SPINOR_OP_RDCR (35h) command.
- * @nor: pointer to 'struct spi_nor'
- * @cr: pointer to a DMA-able buffer where the value of the
- * Configuration Register will be written.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_read_cr(struct spi_nor *nor, u8 *cr)
-{
- int ret;
-
- if (nor->spimem) {
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDCR, 1),
- SPI_MEM_OP_NO_ADDR,
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_DATA_IN(1, cr, 1));
-
- ret = spi_mem_exec_op(nor->spimem, &op);
- } else {
- ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDCR, cr, 1);
- }
-
- if (ret)
- dev_dbg(nor->dev, "error %d reading CR\n", ret);
-
- return ret;
-}
-
-/**
- * macronix_set_4byte() - Set 4-byte address mode for Macronix flashes.
- * @nor: pointer to 'struct spi_nor'.
- * @enable: true to enter the 4-byte address mode, false to exit the 4-byte
- * address mode.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int macronix_set_4byte(struct spi_nor *nor, bool enable)
-{
- int ret;
-
- if (nor->spimem) {
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(enable ?
- SPINOR_OP_EN4B :
- SPINOR_OP_EX4B,
- 1),
- SPI_MEM_OP_NO_ADDR,
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_NO_DATA);
-
- ret = spi_mem_exec_op(nor->spimem, &op);
- } else {
- ret = nor->controller_ops->write_reg(nor,
- enable ? SPINOR_OP_EN4B :
- SPINOR_OP_EX4B,
- NULL, 0);
- }
-
- if (ret)
- dev_dbg(nor->dev, "error %d setting 4-byte mode\n", ret);
-
- return ret;
-}
-
-/**
- * st_micron_set_4byte() - Set 4-byte address mode for ST and Micron flashes.
- * @nor: pointer to 'struct spi_nor'.
- * @enable: true to enter the 4-byte address mode, false to exit the 4-byte
- * address mode.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int st_micron_set_4byte(struct spi_nor *nor, bool enable)
-{
- int ret;
-
- ret = spi_nor_write_enable(nor);
- if (ret)
- return ret;
-
- ret = macronix_set_4byte(nor, enable);
- if (ret)
- return ret;
-
- return spi_nor_write_disable(nor);
-}
-
-/**
- * spansion_set_4byte() - Set 4-byte address mode for Spansion flashes.
- * @nor: pointer to 'struct spi_nor'.
- * @enable: true to enter the 4-byte address mode, false to exit the 4-byte
- * address mode.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spansion_set_4byte(struct spi_nor *nor, bool enable)
-{
- int ret;
-
- nor->bouncebuf[0] = enable << 7;
-
- if (nor->spimem) {
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_BRWR, 1),
- SPI_MEM_OP_NO_ADDR,
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1));
-
- ret = spi_mem_exec_op(nor->spimem, &op);
- } else {
- ret = nor->controller_ops->write_reg(nor, SPINOR_OP_BRWR,
- nor->bouncebuf, 1);
- }
-
- if (ret)
- dev_dbg(nor->dev, "error %d setting 4-byte mode\n", ret);
-
- return ret;
-}
-
-/**
- * spi_nor_write_ear() - Write Extended Address Register.
- * @nor: pointer to 'struct spi_nor'.
- * @ear: value to write to the Extended Address Register.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_write_ear(struct spi_nor *nor, u8 ear)
-{
- int ret;
-
- nor->bouncebuf[0] = ear;
-
- if (nor->spimem) {
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WREAR, 1),
- SPI_MEM_OP_NO_ADDR,
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1));
-
- ret = spi_mem_exec_op(nor->spimem, &op);
- } else {
- ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WREAR,
- nor->bouncebuf, 1);
- }
-
- if (ret)
- dev_dbg(nor->dev, "error %d writing EAR\n", ret);
-
- return ret;
-}
-
-/**
- * winbond_set_4byte() - Set 4-byte address mode for Winbond flashes.
- * @nor: pointer to 'struct spi_nor'.
- * @enable: true to enter the 4-byte address mode, false to exit the 4-byte
- * address mode.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int winbond_set_4byte(struct spi_nor *nor, bool enable)
-{
- int ret;
-
- ret = macronix_set_4byte(nor, enable);
- if (ret || enable)
- return ret;
-
- /*
- * On Winbond W25Q256FV, leaving 4byte mode causes the Extended Address
- * Register to be set to 1, so all 3-byte-address reads come from the
- * second 16M. We must clear the register to enable normal behavior.
- */
- ret = spi_nor_write_enable(nor);
- if (ret)
- return ret;
-
- ret = spi_nor_write_ear(nor, 0);
- if (ret)
- return ret;
-
- return spi_nor_write_disable(nor);
-}
-
-/**
- * spi_nor_xread_sr() - Read the Status Register on S3AN flashes.
- * @nor: pointer to 'struct spi_nor'.
- * @sr: pointer to a DMA-able buffer where the value of the
- * Status Register will be written.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr)
-{
- int ret;
-
- if (nor->spimem) {
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_XRDSR, 1),
- SPI_MEM_OP_NO_ADDR,
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_DATA_IN(1, sr, 1));
-
- ret = spi_mem_exec_op(nor->spimem, &op);
- } else {
- ret = nor->controller_ops->read_reg(nor, SPINOR_OP_XRDSR,
- sr, 1);
- }
-
- if (ret)
- dev_dbg(nor->dev, "error %d reading XRDSR\n", ret);
-
- return ret;
-}
-
-/**
- * s3an_sr_ready() - Query the Status Register of the S3AN flash to see if the
- * flash is ready for new commands.
- * @nor: pointer to 'struct spi_nor'.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int s3an_sr_ready(struct spi_nor *nor)
-{
- int ret;
-
- ret = spi_nor_xread_sr(nor, nor->bouncebuf);
- if (ret)
- return ret;
-
- return !!(nor->bouncebuf[0] & XSR_RDY);
-}
-
-/**
- * spi_nor_clear_sr() - Clear the Status Register.
- * @nor: pointer to 'struct spi_nor'.
- */
-static void spi_nor_clear_sr(struct spi_nor *nor)
-{
- int ret;
-
- if (nor->spimem) {
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLSR, 1),
- SPI_MEM_OP_NO_ADDR,
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_NO_DATA);
-
- ret = spi_mem_exec_op(nor->spimem, &op);
- } else {
- ret = nor->controller_ops->write_reg(nor, SPINOR_OP_CLSR,
- NULL, 0);
- }
-
- if (ret)
- dev_dbg(nor->dev, "error %d clearing SR\n", ret);
-}
-
-/**
- * spi_nor_sr_ready() - Query the Status Register to see if the flash is ready
- * for new commands.
- * @nor: pointer to 'struct spi_nor'.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_sr_ready(struct spi_nor *nor)
-{
- int ret = spi_nor_read_sr(nor, nor->bouncebuf);
-
- if (ret)
- return ret;
-
- if (nor->flags & SNOR_F_USE_CLSR &&
- nor->bouncebuf[0] & (SR_E_ERR | SR_P_ERR)) {
- if (nor->bouncebuf[0] & SR_E_ERR)
- dev_err(nor->dev, "Erase Error occurred\n");
- else
- dev_err(nor->dev, "Programming Error occurred\n");
-
- spi_nor_clear_sr(nor);
- return -EIO;
- }
-
- return !(nor->bouncebuf[0] & SR_WIP);
-}
-
-/**
- * spi_nor_clear_fsr() - Clear the Flag Status Register.
- * @nor: pointer to 'struct spi_nor'.
- */
-static void spi_nor_clear_fsr(struct spi_nor *nor)
-{
- int ret;
-
- if (nor->spimem) {
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLFSR, 1),
- SPI_MEM_OP_NO_ADDR,
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_NO_DATA);
-
- ret = spi_mem_exec_op(nor->spimem, &op);
- } else {
- ret = nor->controller_ops->write_reg(nor, SPINOR_OP_CLFSR,
- NULL, 0);
- }
-
- if (ret)
- dev_dbg(nor->dev, "error %d clearing FSR\n", ret);
-}
-
-/**
- * spi_nor_fsr_ready() - Query the Flag Status Register to see if the flash is
- * ready for new commands.
- * @nor: pointer to 'struct spi_nor'.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_fsr_ready(struct spi_nor *nor)
-{
- int ret = spi_nor_read_fsr(nor, nor->bouncebuf);
-
- if (ret)
- return ret;
-
- if (nor->bouncebuf[0] & (FSR_E_ERR | FSR_P_ERR)) {
- if (nor->bouncebuf[0] & FSR_E_ERR)
- dev_err(nor->dev, "Erase operation failed.\n");
- else
- dev_err(nor->dev, "Program operation failed.\n");
-
- if (nor->bouncebuf[0] & FSR_PT_ERR)
- dev_err(nor->dev,
- "Attempted to modify a protected sector.\n");
-
- spi_nor_clear_fsr(nor);
- return -EIO;
- }
-
- return nor->bouncebuf[0] & FSR_READY;
-}
-
-/**
- * spi_nor_ready() - Query the flash to see if it is ready for new commands.
- * @nor: pointer to 'struct spi_nor'.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_ready(struct spi_nor *nor)
-{
- int sr, fsr;
-
- if (nor->flags & SNOR_F_READY_XSR_RDY)
- sr = s3an_sr_ready(nor);
- else
- sr = spi_nor_sr_ready(nor);
- if (sr < 0)
- return sr;
- fsr = nor->flags & SNOR_F_USE_FSR ? spi_nor_fsr_ready(nor) : 1;
- if (fsr < 0)
- return fsr;
- return sr && fsr;
-}
-
-/**
- * spi_nor_wait_till_ready_with_timeout() - Service routine to read the
- * Status Register until ready, or timeout occurs.
- * @nor: pointer to "struct spi_nor".
- * @timeout_jiffies: jiffies to wait until timeout.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_wait_till_ready_with_timeout(struct spi_nor *nor,
- unsigned long timeout_jiffies)
-{
- unsigned long deadline;
- int timeout = 0, ret;
-
- deadline = jiffies + timeout_jiffies;
-
- while (!timeout) {
- if (time_after_eq(jiffies, deadline))
- timeout = 1;
-
- ret = spi_nor_ready(nor);
- if (ret < 0)
- return ret;
- if (ret)
- return 0;
-
- cond_resched();
- }
-
- dev_dbg(nor->dev, "flash operation timed out\n");
-
- return -ETIMEDOUT;
-}
-
-/**
- * spi_nor_wait_till_ready() - Wait for a predefined amount of time for the
- * flash to be ready, or timeout occurs.
- * @nor: pointer to "struct spi_nor".
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_wait_till_ready(struct spi_nor *nor)
-{
- return spi_nor_wait_till_ready_with_timeout(nor,
- DEFAULT_READY_WAIT_JIFFIES);
-}
-
-/**
- * spi_nor_write_sr() - Write the Status Register.
- * @nor: pointer to 'struct spi_nor'.
- * @sr: pointer to DMA-able buffer to write to the Status Register.
- * @len: number of bytes to write to the Status Register.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_write_sr(struct spi_nor *nor, const u8 *sr, size_t len)
-{
- int ret;
-
- ret = spi_nor_write_enable(nor);
- if (ret)
- return ret;
-
- if (nor->spimem) {
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR, 1),
- SPI_MEM_OP_NO_ADDR,
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_DATA_OUT(len, sr, 1));
-
- ret = spi_mem_exec_op(nor->spimem, &op);
- } else {
- ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WRSR,
- sr, len);
- }
-
- if (ret) {
- dev_dbg(nor->dev, "error %d writing SR\n", ret);
- return ret;
- }
-
- return spi_nor_wait_till_ready(nor);
-}
-
-/**
- * spi_nor_write_sr1_and_check() - Write one byte to the Status Register 1 and
- * ensure that the byte written match the received value.
- * @nor: pointer to a 'struct spi_nor'.
- * @sr1: byte value to be written to the Status Register.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_write_sr1_and_check(struct spi_nor *nor, u8 sr1)
-{
- int ret;
-
- nor->bouncebuf[0] = sr1;
-
- ret = spi_nor_write_sr(nor, nor->bouncebuf, 1);
- if (ret)
- return ret;
-
- ret = spi_nor_read_sr(nor, nor->bouncebuf);
- if (ret)
- return ret;
-
- if (nor->bouncebuf[0] != sr1) {
- dev_dbg(nor->dev, "SR1: read back test failed\n");
- return -EIO;
- }
-
- return 0;
-}
-
-/**
- * spi_nor_write_16bit_sr_and_check() - Write the Status Register 1 and the
- * Status Register 2 in one shot. Ensure that the byte written in the Status
- * Register 1 match the received value, and that the 16-bit Write did not
- * affect what was already in the Status Register 2.
- * @nor: pointer to a 'struct spi_nor'.
- * @sr1: byte value to be written to the Status Register 1.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_write_16bit_sr_and_check(struct spi_nor *nor, u8 sr1)
-{
- int ret;
- u8 *sr_cr = nor->bouncebuf;
- u8 cr_written;
-
- /* Make sure we don't overwrite the contents of Status Register 2. */
- if (!(nor->flags & SNOR_F_NO_READ_CR)) {
- ret = spi_nor_read_cr(nor, &sr_cr[1]);
- if (ret)
- return ret;
- } else if (nor->params.quad_enable) {
- /*
- * If the Status Register 2 Read command (35h) is not
- * supported, we should at least be sure we don't
- * change the value of the SR2 Quad Enable bit.
- *
- * We can safely assume that when the Quad Enable method is
- * set, the value of the QE bit is one, as a consequence of the
- * nor->params.quad_enable() call.
- *
- * We can safely assume that the Quad Enable bit is present in
- * the Status Register 2 at BIT(1). According to the JESD216
- * revB standard, BFPT DWORDS[15], bits 22:20, the 16-bit
- * Write Status (01h) command is available just for the cases
- * in which the QE bit is described in SR2 at BIT(1).
- */
- sr_cr[1] = SR2_QUAD_EN_BIT1;
- } else {
- sr_cr[1] = 0;
- }
-
- sr_cr[0] = sr1;
-
- ret = spi_nor_write_sr(nor, sr_cr, 2);
- if (ret)
- return ret;
-
- if (nor->flags & SNOR_F_NO_READ_CR)
- return 0;
-
- cr_written = sr_cr[1];
-
- ret = spi_nor_read_cr(nor, &sr_cr[1]);
- if (ret)
- return ret;
-
- if (cr_written != sr_cr[1]) {
- dev_dbg(nor->dev, "CR: read back test failed\n");
- return -EIO;
- }
-
- return 0;
-}
-
-/**
- * spi_nor_write_16bit_cr_and_check() - Write the Status Register 1 and the
- * Configuration Register in one shot. Ensure that the byte written in the
- * Configuration Register match the received value, and that the 16-bit Write
- * did not affect what was already in the Status Register 1.
- * @nor: pointer to a 'struct spi_nor'.
- * @cr: byte value to be written to the Configuration Register.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_write_16bit_cr_and_check(struct spi_nor *nor, u8 cr)
-{
- int ret;
- u8 *sr_cr = nor->bouncebuf;
- u8 sr_written;
-
- /* Keep the current value of the Status Register 1. */
- ret = spi_nor_read_sr(nor, sr_cr);
- if (ret)
- return ret;
-
- sr_cr[1] = cr;
-
- ret = spi_nor_write_sr(nor, sr_cr, 2);
- if (ret)
- return ret;
-
- sr_written = sr_cr[0];
-
- ret = spi_nor_read_sr(nor, sr_cr);
- if (ret)
- return ret;
-
- if (sr_written != sr_cr[0]) {
- dev_dbg(nor->dev, "SR: Read back test failed\n");
- return -EIO;
- }
-
- if (nor->flags & SNOR_F_NO_READ_CR)
- return 0;
-
- ret = spi_nor_read_cr(nor, &sr_cr[1]);
- if (ret)
- return ret;
-
- if (cr != sr_cr[1]) {
- dev_dbg(nor->dev, "CR: read back test failed\n");
- return -EIO;
- }
-
- return 0;
-}
-
-/**
- * spi_nor_write_sr_and_check() - Write the Status Register 1 and ensure that
- * the byte written match the received value without affecting other bits in the
- * Status Register 1 and 2.
- * @nor: pointer to a 'struct spi_nor'.
- * @sr1: byte value to be written to the Status Register.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_write_sr_and_check(struct spi_nor *nor, u8 sr1)
-{
- if (nor->flags & SNOR_F_HAS_16BIT_SR)
- return spi_nor_write_16bit_sr_and_check(nor, sr1);
-
- return spi_nor_write_sr1_and_check(nor, sr1);
-}
-
-/**
- * spi_nor_write_sr2() - Write the Status Register 2 using the
- * SPINOR_OP_WRSR2 (3eh) command.
- * @nor: pointer to 'struct spi_nor'.
- * @sr2: pointer to DMA-able buffer to write to the Status Register 2.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_write_sr2(struct spi_nor *nor, const u8 *sr2)
-{
- int ret;
-
- ret = spi_nor_write_enable(nor);
- if (ret)
- return ret;
-
- if (nor->spimem) {
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WRSR2, 1),
- SPI_MEM_OP_NO_ADDR,
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_DATA_OUT(1, sr2, 1));
-
- ret = spi_mem_exec_op(nor->spimem, &op);
- } else {
- ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WRSR2,
- sr2, 1);
- }
-
- if (ret) {
- dev_dbg(nor->dev, "error %d writing SR2\n", ret);
- return ret;
- }
-
- return spi_nor_wait_till_ready(nor);
-}
-
-/**
- * spi_nor_read_sr2() - Read the Status Register 2 using the
- * SPINOR_OP_RDSR2 (3fh) command.
- * @nor: pointer to 'struct spi_nor'.
- * @sr2: pointer to DMA-able buffer where the value of the
- * Status Register 2 will be written.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_read_sr2(struct spi_nor *nor, u8 *sr2)
-{
- int ret;
-
- if (nor->spimem) {
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDSR2, 1),
- SPI_MEM_OP_NO_ADDR,
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_DATA_IN(1, sr2, 1));
-
- ret = spi_mem_exec_op(nor->spimem, &op);
- } else {
- ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDSR2,
- sr2, 1);
- }
-
- if (ret)
- dev_dbg(nor->dev, "error %d reading SR2\n", ret);
-
- return ret;
-}
-
-/**
- * spi_nor_erase_chip() - Erase the entire flash memory.
- * @nor: pointer to 'struct spi_nor'.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_erase_chip(struct spi_nor *nor)
-{
- int ret;
-
- dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd.size >> 10));
-
- if (nor->spimem) {
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CHIP_ERASE, 1),
- SPI_MEM_OP_NO_ADDR,
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_NO_DATA);
-
- ret = spi_mem_exec_op(nor->spimem, &op);
- } else {
- ret = nor->controller_ops->write_reg(nor, SPINOR_OP_CHIP_ERASE,
- NULL, 0);
- }
-
- if (ret)
- dev_dbg(nor->dev, "error %d erasing chip\n", ret);
-
- return ret;
-}
-
-static struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd)
-{
- return mtd->priv;
-}
-
-static u8 spi_nor_convert_opcode(u8 opcode, const u8 table[][2], size_t size)
-{
- size_t i;
-
- for (i = 0; i < size; i++)
- if (table[i][0] == opcode)
- return table[i][1];
-
- /* No conversion found, keep input op code. */
- return opcode;
-}
-
-static u8 spi_nor_convert_3to4_read(u8 opcode)
-{
- static const u8 spi_nor_3to4_read[][2] = {
- { SPINOR_OP_READ, SPINOR_OP_READ_4B },
- { SPINOR_OP_READ_FAST, SPINOR_OP_READ_FAST_4B },
- { SPINOR_OP_READ_1_1_2, SPINOR_OP_READ_1_1_2_4B },
- { SPINOR_OP_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B },
- { SPINOR_OP_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B },
- { SPINOR_OP_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B },
- { SPINOR_OP_READ_1_1_8, SPINOR_OP_READ_1_1_8_4B },
- { SPINOR_OP_READ_1_8_8, SPINOR_OP_READ_1_8_8_4B },
-
- { SPINOR_OP_READ_1_1_1_DTR, SPINOR_OP_READ_1_1_1_DTR_4B },
- { SPINOR_OP_READ_1_2_2_DTR, SPINOR_OP_READ_1_2_2_DTR_4B },
- { SPINOR_OP_READ_1_4_4_DTR, SPINOR_OP_READ_1_4_4_DTR_4B },
- };
-
- return spi_nor_convert_opcode(opcode, spi_nor_3to4_read,
- ARRAY_SIZE(spi_nor_3to4_read));
-}
-
-static u8 spi_nor_convert_3to4_program(u8 opcode)
-{
- static const u8 spi_nor_3to4_program[][2] = {
- { SPINOR_OP_PP, SPINOR_OP_PP_4B },
- { SPINOR_OP_PP_1_1_4, SPINOR_OP_PP_1_1_4_4B },
- { SPINOR_OP_PP_1_4_4, SPINOR_OP_PP_1_4_4_4B },
- { SPINOR_OP_PP_1_1_8, SPINOR_OP_PP_1_1_8_4B },
- { SPINOR_OP_PP_1_8_8, SPINOR_OP_PP_1_8_8_4B },
- };
-
- return spi_nor_convert_opcode(opcode, spi_nor_3to4_program,
- ARRAY_SIZE(spi_nor_3to4_program));
-}
-
-static u8 spi_nor_convert_3to4_erase(u8 opcode)
-{
- static const u8 spi_nor_3to4_erase[][2] = {
- { SPINOR_OP_BE_4K, SPINOR_OP_BE_4K_4B },
- { SPINOR_OP_BE_32K, SPINOR_OP_BE_32K_4B },
- { SPINOR_OP_SE, SPINOR_OP_SE_4B },
- };
-
- return spi_nor_convert_opcode(opcode, spi_nor_3to4_erase,
- ARRAY_SIZE(spi_nor_3to4_erase));
-}
-
-static void spi_nor_set_4byte_opcodes(struct spi_nor *nor)
-{
- nor->read_opcode = spi_nor_convert_3to4_read(nor->read_opcode);
- nor->program_opcode = spi_nor_convert_3to4_program(nor->program_opcode);
- nor->erase_opcode = spi_nor_convert_3to4_erase(nor->erase_opcode);
-
- if (!spi_nor_has_uniform_erase(nor)) {
- struct spi_nor_erase_map *map = &nor->params.erase_map;
- struct spi_nor_erase_type *erase;
- int i;
-
- for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
- erase = &map->erase_type[i];
- erase->opcode =
- spi_nor_convert_3to4_erase(erase->opcode);
- }
- }
-}
-
-static int spi_nor_lock_and_prep(struct spi_nor *nor)
-{
- int ret = 0;
-
- mutex_lock(&nor->lock);
-
- if (nor->controller_ops && nor->controller_ops->prepare) {
- ret = nor->controller_ops->prepare(nor);
- if (ret) {
- mutex_unlock(&nor->lock);
- return ret;
- }
- }
- return ret;
-}
-
-static void spi_nor_unlock_and_unprep(struct spi_nor *nor)
-{
- if (nor->controller_ops && nor->controller_ops->unprepare)
- nor->controller_ops->unprepare(nor);
- mutex_unlock(&nor->lock);
-}
-
-/*
- * This code converts an address to the Default Address Mode, that has non
- * power of two page sizes. We must support this mode because it is the default
- * mode supported by Xilinx tools, it can access the whole flash area and
- * changing over to the Power-of-two mode is irreversible and corrupts the
- * original data.
- * Addr can safely be unsigned int, the biggest S3AN device is smaller than
- * 4 MiB.
- */
-static u32 s3an_convert_addr(struct spi_nor *nor, u32 addr)
-{
- u32 offset, page;
-
- offset = addr % nor->page_size;
- page = addr / nor->page_size;
- page <<= (nor->page_size > 512) ? 10 : 9;
-
- return page | offset;
-}
-
-static u32 spi_nor_convert_addr(struct spi_nor *nor, loff_t addr)
-{
- if (!nor->params.convert_addr)
- return addr;
-
- return nor->params.convert_addr(nor, addr);
-}
-
-/*
- * Initiate the erasure of a single sector
- */
-static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
-{
- int i;
-
- addr = spi_nor_convert_addr(nor, addr);
-
- if (nor->spimem) {
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(nor->erase_opcode, 1),
- SPI_MEM_OP_ADDR(nor->addr_width, addr, 1),
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_NO_DATA);
-
- return spi_mem_exec_op(nor->spimem, &op);
- } else if (nor->controller_ops->erase) {
- return nor->controller_ops->erase(nor, addr);
- }
-
- /*
- * Default implementation, if driver doesn't have a specialized HW
- * control
- */
- for (i = nor->addr_width - 1; i >= 0; i--) {
- nor->bouncebuf[i] = addr & 0xff;
- addr >>= 8;
- }
-
- return nor->controller_ops->write_reg(nor, nor->erase_opcode,
- nor->bouncebuf, nor->addr_width);
-}
-
-/**
- * spi_nor_div_by_erase_size() - calculate remainder and update new dividend
- * @erase: pointer to a structure that describes a SPI NOR erase type
- * @dividend: dividend value
- * @remainder: pointer to u32 remainder (will be updated)
- *
- * Return: the result of the division
- */
-static u64 spi_nor_div_by_erase_size(const struct spi_nor_erase_type *erase,
- u64 dividend, u32 *remainder)
-{
- /* JEDEC JESD216B Standard imposes erase sizes to be power of 2. */
- *remainder = (u32)dividend & erase->size_mask;
- return dividend >> erase->size_shift;
-}
-
-/**
- * spi_nor_find_best_erase_type() - find the best erase type for the given
- * offset in the serial flash memory and the
- * number of bytes to erase. The region in
- * which the address fits is expected to be
- * provided.
- * @map: the erase map of the SPI NOR
- * @region: pointer to a structure that describes a SPI NOR erase region
- * @addr: offset in the serial flash memory
- * @len: number of bytes to erase
- *
- * Return: a pointer to the best fitted erase type, NULL otherwise.
- */
-static const struct spi_nor_erase_type *
-spi_nor_find_best_erase_type(const struct spi_nor_erase_map *map,
- const struct spi_nor_erase_region *region,
- u64 addr, u32 len)
-{
- const struct spi_nor_erase_type *erase;
- u32 rem;
- int i;
- u8 erase_mask = region->offset & SNOR_ERASE_TYPE_MASK;
-
- /*
- * Erase types are ordered by size, with the smallest erase type at
- * index 0.
- */
- for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
- /* Does the erase region support the tested erase type? */
- if (!(erase_mask & BIT(i)))
- continue;
-
- erase = &map->erase_type[i];
-
- /* Don't erase more than what the user has asked for. */
- if (erase->size > len)
- continue;
-
- /* Alignment is not mandatory for overlaid regions */
- if (region->offset & SNOR_OVERLAID_REGION)
- return erase;
-
- spi_nor_div_by_erase_size(erase, addr, &rem);
- if (rem)
- continue;
- else
- return erase;
- }
-
- return NULL;
-}
-
-/**
- * spi_nor_region_next() - get the next spi nor region
- * @region: pointer to a structure that describes a SPI NOR erase region
- *
- * Return: the next spi nor region or NULL if last region.
- */
-static struct spi_nor_erase_region *
-spi_nor_region_next(struct spi_nor_erase_region *region)
-{
- if (spi_nor_region_is_last(region))
- return NULL;
- region++;
- return region;
-}
-
-/**
- * spi_nor_find_erase_region() - find the region of the serial flash memory in
- * which the offset fits
- * @map: the erase map of the SPI NOR
- * @addr: offset in the serial flash memory
- *
- * Return: a pointer to the spi_nor_erase_region struct, ERR_PTR(-errno)
- * otherwise.
- */
-static struct spi_nor_erase_region *
-spi_nor_find_erase_region(const struct spi_nor_erase_map *map, u64 addr)
-{
- struct spi_nor_erase_region *region = map->regions;
- u64 region_start = region->offset & ~SNOR_ERASE_FLAGS_MASK;
- u64 region_end = region_start + region->size;
-
- while (addr < region_start || addr >= region_end) {
- region = spi_nor_region_next(region);
- if (!region)
- return ERR_PTR(-EINVAL);
-
- region_start = region->offset & ~SNOR_ERASE_FLAGS_MASK;
- region_end = region_start + region->size;
- }
-
- return region;
-}
-
-/**
- * spi_nor_init_erase_cmd() - initialize an erase command
- * @region: pointer to a structure that describes a SPI NOR erase region
- * @erase: pointer to a structure that describes a SPI NOR erase type
- *
- * Return: the pointer to the allocated erase command, ERR_PTR(-errno)
- * otherwise.
- */
-static struct spi_nor_erase_command *
-spi_nor_init_erase_cmd(const struct spi_nor_erase_region *region,
- const struct spi_nor_erase_type *erase)
-{
- struct spi_nor_erase_command *cmd;
-
- cmd = kmalloc(sizeof(*cmd), GFP_KERNEL);
- if (!cmd)
- return ERR_PTR(-ENOMEM);
-
- INIT_LIST_HEAD(&cmd->list);
- cmd->opcode = erase->opcode;
- cmd->count = 1;
-
- if (region->offset & SNOR_OVERLAID_REGION)
- cmd->size = region->size;
- else
- cmd->size = erase->size;
-
- return cmd;
-}
-
-/**
- * spi_nor_destroy_erase_cmd_list() - destroy erase command list
- * @erase_list: list of erase commands
- */
-static void spi_nor_destroy_erase_cmd_list(struct list_head *erase_list)
-{
- struct spi_nor_erase_command *cmd, *next;
-
- list_for_each_entry_safe(cmd, next, erase_list, list) {
- list_del(&cmd->list);
- kfree(cmd);
- }
-}
-
-/**
- * spi_nor_init_erase_cmd_list() - initialize erase command list
- * @nor: pointer to a 'struct spi_nor'
- * @erase_list: list of erase commands to be executed once we validate that the
- * erase can be performed
- * @addr: offset in the serial flash memory
- * @len: number of bytes to erase
- *
- * Builds the list of best fitted erase commands and verifies if the erase can
- * be performed.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_init_erase_cmd_list(struct spi_nor *nor,
- struct list_head *erase_list,
- u64 addr, u32 len)
-{
- const struct spi_nor_erase_map *map = &nor->params.erase_map;
- const struct spi_nor_erase_type *erase, *prev_erase = NULL;
- struct spi_nor_erase_region *region;
- struct spi_nor_erase_command *cmd = NULL;
- u64 region_end;
- int ret = -EINVAL;
-
- region = spi_nor_find_erase_region(map, addr);
- if (IS_ERR(region))
- return PTR_ERR(region);
-
- region_end = spi_nor_region_end(region);
-
- while (len) {
- erase = spi_nor_find_best_erase_type(map, region, addr, len);
- if (!erase)
- goto destroy_erase_cmd_list;
-
- if (prev_erase != erase ||
- region->offset & SNOR_OVERLAID_REGION) {
- cmd = spi_nor_init_erase_cmd(region, erase);
- if (IS_ERR(cmd)) {
- ret = PTR_ERR(cmd);
- goto destroy_erase_cmd_list;
- }
-
- list_add_tail(&cmd->list, erase_list);
- } else {
- cmd->count++;
- }
-
- addr += cmd->size;
- len -= cmd->size;
-
- if (len && addr >= region_end) {
- region = spi_nor_region_next(region);
- if (!region)
- goto destroy_erase_cmd_list;
- region_end = spi_nor_region_end(region);
- }
-
- prev_erase = erase;
- }
-
- return 0;
-
-destroy_erase_cmd_list:
- spi_nor_destroy_erase_cmd_list(erase_list);
- return ret;
-}
-
-/**
- * spi_nor_erase_multi_sectors() - perform a non-uniform erase
- * @nor: pointer to a 'struct spi_nor'
- * @addr: offset in the serial flash memory
- * @len: number of bytes to erase
- *
- * Build a list of best fitted erase commands and execute it once we validate
- * that the erase can be performed.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_erase_multi_sectors(struct spi_nor *nor, u64 addr, u32 len)
-{
- LIST_HEAD(erase_list);
- struct spi_nor_erase_command *cmd, *next;
- int ret;
-
- ret = spi_nor_init_erase_cmd_list(nor, &erase_list, addr, len);
- if (ret)
- return ret;
-
- list_for_each_entry_safe(cmd, next, &erase_list, list) {
- nor->erase_opcode = cmd->opcode;
- while (cmd->count) {
- ret = spi_nor_write_enable(nor);
- if (ret)
- goto destroy_erase_cmd_list;
-
- ret = spi_nor_erase_sector(nor, addr);
- if (ret)
- goto destroy_erase_cmd_list;
-
- addr += cmd->size;
- cmd->count--;
-
- ret = spi_nor_wait_till_ready(nor);
- if (ret)
- goto destroy_erase_cmd_list;
- }
- list_del(&cmd->list);
- kfree(cmd);
- }
-
- return 0;
-
-destroy_erase_cmd_list:
- spi_nor_destroy_erase_cmd_list(&erase_list);
- return ret;
-}
-
-/*
- * Erase an address range on the nor chip. The address range may extend
- * one or more erase sectors. Return an error is there is a problem erasing.
- */
-static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr)
-{
- struct spi_nor *nor = mtd_to_spi_nor(mtd);
- u32 addr, len;
- uint32_t rem;
- int ret;
-
- dev_dbg(nor->dev, "at 0x%llx, len %lld\n", (long long)instr->addr,
- (long long)instr->len);
-
- if (spi_nor_has_uniform_erase(nor)) {
- div_u64_rem(instr->len, mtd->erasesize, &rem);
- if (rem)
- return -EINVAL;
- }
-
- addr = instr->addr;
- len = instr->len;
-
- ret = spi_nor_lock_and_prep(nor);
- if (ret)
- return ret;
-
- /* whole-chip erase? */
- if (len == mtd->size && !(nor->flags & SNOR_F_NO_OP_CHIP_ERASE)) {
- unsigned long timeout;
-
- ret = spi_nor_write_enable(nor);
- if (ret)
- goto erase_err;
-
- ret = spi_nor_erase_chip(nor);
- if (ret)
- goto erase_err;
-
- /*
- * Scale the timeout linearly with the size of the flash, with
- * a minimum calibrated to an old 2MB flash. We could try to
- * pull these from CFI/SFDP, but these values should be good
- * enough for now.
- */
- timeout = max(CHIP_ERASE_2MB_READY_WAIT_JIFFIES,
- CHIP_ERASE_2MB_READY_WAIT_JIFFIES *
- (unsigned long)(mtd->size / SZ_2M));
- ret = spi_nor_wait_till_ready_with_timeout(nor, timeout);
- if (ret)
- goto erase_err;
-
- /* REVISIT in some cases we could speed up erasing large regions
- * by using SPINOR_OP_SE instead of SPINOR_OP_BE_4K. We may have set up
- * to use "small sector erase", but that's not always optimal.
- */
-
- /* "sector"-at-a-time erase */
- } else if (spi_nor_has_uniform_erase(nor)) {
- while (len) {
- ret = spi_nor_write_enable(nor);
- if (ret)
- goto erase_err;
-
- ret = spi_nor_erase_sector(nor, addr);
- if (ret)
- goto erase_err;
-
- addr += mtd->erasesize;
- len -= mtd->erasesize;
-
- ret = spi_nor_wait_till_ready(nor);
- if (ret)
- goto erase_err;
- }
-
- /* erase multiple sectors */
- } else {
- ret = spi_nor_erase_multi_sectors(nor, addr, len);
- if (ret)
- goto erase_err;
- }
-
- ret = spi_nor_write_disable(nor);
-
-erase_err:
- spi_nor_unlock_and_unprep(nor);
-
- return ret;
-}
-
-static void stm_get_locked_range(struct spi_nor *nor, u8 sr, loff_t *ofs,
- uint64_t *len)
-{
- struct mtd_info *mtd = &nor->mtd;
- u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
- u8 tb_mask = SR_TB_BIT5;
- int shift = ffs(mask) - 1;
- int pow;
-
- if (nor->flags & SNOR_F_HAS_SR_TB_BIT6)
- tb_mask = SR_TB_BIT6;
-
- if (!(sr & mask)) {
- /* No protection */
- *ofs = 0;
- *len = 0;
- } else {
- pow = ((sr & mask) ^ mask) >> shift;
- *len = mtd->size >> pow;
- if (nor->flags & SNOR_F_HAS_SR_TB && sr & tb_mask)
- *ofs = 0;
- else
- *ofs = mtd->size - *len;
- }
-}
-
-/*
- * Return 1 if the entire region is locked (if @locked is true) or unlocked (if
- * @locked is false); 0 otherwise
- */
-static int stm_check_lock_status_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
- u8 sr, bool locked)
-{
- loff_t lock_offs;
- uint64_t lock_len;
-
- if (!len)
- return 1;
-
- stm_get_locked_range(nor, sr, &lock_offs, &lock_len);
-
- if (locked)
- /* Requested range is a sub-range of locked range */
- return (ofs + len <= lock_offs + lock_len) && (ofs >= lock_offs);
- else
- /* Requested range does not overlap with locked range */
- return (ofs >= lock_offs + lock_len) || (ofs + len <= lock_offs);
-}
-
-static int stm_is_locked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
- u8 sr)
-{
- return stm_check_lock_status_sr(nor, ofs, len, sr, true);
-}
-
-static int stm_is_unlocked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
- u8 sr)
-{
- return stm_check_lock_status_sr(nor, ofs, len, sr, false);
-}
-
-/*
- * Lock a region of the flash. Compatible with ST Micro and similar flash.
- * Supports the block protection bits BP{0,1,2} in the status register
- * (SR). Does not support these features found in newer SR bitfields:
- * - SEC: sector/block protect - only handle SEC=0 (block protect)
- * - CMP: complement protect - only support CMP=0 (range is not complemented)
- *
- * Support for the following is provided conditionally for some flash:
- * - TB: top/bottom protect
- *
- * Sample table portion for 8MB flash (Winbond w25q64fw):
- *
- * SEC | TB | BP2 | BP1 | BP0 | Prot Length | Protected Portion
- * --------------------------------------------------------------------------
- * X | X | 0 | 0 | 0 | NONE | NONE
- * 0 | 0 | 0 | 0 | 1 | 128 KB | Upper 1/64
- * 0 | 0 | 0 | 1 | 0 | 256 KB | Upper 1/32
- * 0 | 0 | 0 | 1 | 1 | 512 KB | Upper 1/16
- * 0 | 0 | 1 | 0 | 0 | 1 MB | Upper 1/8
- * 0 | 0 | 1 | 0 | 1 | 2 MB | Upper 1/4
- * 0 | 0 | 1 | 1 | 0 | 4 MB | Upper 1/2
- * X | X | 1 | 1 | 1 | 8 MB | ALL
- * ------|-------|-------|-------|-------|---------------|-------------------
- * 0 | 1 | 0 | 0 | 1 | 128 KB | Lower 1/64
- * 0 | 1 | 0 | 1 | 0 | 256 KB | Lower 1/32
- * 0 | 1 | 0 | 1 | 1 | 512 KB | Lower 1/16
- * 0 | 1 | 1 | 0 | 0 | 1 MB | Lower 1/8
- * 0 | 1 | 1 | 0 | 1 | 2 MB | Lower 1/4
- * 0 | 1 | 1 | 1 | 0 | 4 MB | Lower 1/2
- *
- * Returns negative on errors, 0 on success.
- */
-static int stm_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
-{
- struct mtd_info *mtd = &nor->mtd;
- int ret, status_old, status_new;
- u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
- u8 tb_mask = SR_TB_BIT5;
- u8 shift = ffs(mask) - 1, pow, val;
- loff_t lock_len;
- bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB;
- bool use_top;
-
- ret = spi_nor_read_sr(nor, nor->bouncebuf);
- if (ret)
- return ret;
-
- status_old = nor->bouncebuf[0];
-
- /* If nothing in our range is unlocked, we don't need to do anything */
- if (stm_is_locked_sr(nor, ofs, len, status_old))
- return 0;
-
- /* If anything below us is unlocked, we can't use 'bottom' protection */
- if (!stm_is_locked_sr(nor, 0, ofs, status_old))
- can_be_bottom = false;
-
- /* If anything above us is unlocked, we can't use 'top' protection */
- if (!stm_is_locked_sr(nor, ofs + len, mtd->size - (ofs + len),
- status_old))
- can_be_top = false;
-
- if (!can_be_bottom && !can_be_top)
- return -EINVAL;
-
- /* Prefer top, if both are valid */
- use_top = can_be_top;
-
- /* lock_len: length of region that should end up locked */
- if (use_top)
- lock_len = mtd->size - ofs;
- else
- lock_len = ofs + len;
-
- if (nor->flags & SNOR_F_HAS_SR_TB_BIT6)
- tb_mask = SR_TB_BIT6;
-
- /*
- * Need smallest pow such that:
- *
- * 1 / (2^pow) <= (len / size)
- *
- * so (assuming power-of-2 size) we do:
- *
- * pow = ceil(log2(size / len)) = log2(size) - floor(log2(len))
- */
- pow = ilog2(mtd->size) - ilog2(lock_len);
- val = mask - (pow << shift);
- if (val & ~mask)
- return -EINVAL;
- /* Don't "lock" with no region! */
- if (!(val & mask))
- return -EINVAL;
-
- status_new = (status_old & ~mask & ~tb_mask) | val;
-
- /* Disallow further writes if WP pin is asserted */
- status_new |= SR_SRWD;
-
- if (!use_top)
- status_new |= tb_mask;
-
- /* Don't bother if they're the same */
- if (status_new == status_old)
- return 0;
-
- /* Only modify protection if it will not unlock other areas */
- if ((status_new & mask) < (status_old & mask))
- return -EINVAL;
-
- return spi_nor_write_sr_and_check(nor, status_new);
-}
-
-/*
- * Unlock a region of the flash. See stm_lock() for more info
- *
- * Returns negative on errors, 0 on success.
- */
-static int stm_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
-{
- struct mtd_info *mtd = &nor->mtd;
- int ret, status_old, status_new;
- u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
- u8 tb_mask = SR_TB_BIT5;
- u8 shift = ffs(mask) - 1, pow, val;
- loff_t lock_len;
- bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB;
- bool use_top;
-
- ret = spi_nor_read_sr(nor, nor->bouncebuf);
- if (ret)
- return ret;
-
- status_old = nor->bouncebuf[0];
-
- /* If nothing in our range is locked, we don't need to do anything */
- if (stm_is_unlocked_sr(nor, ofs, len, status_old))
- return 0;
-
- /* If anything below us is locked, we can't use 'top' protection */
- if (!stm_is_unlocked_sr(nor, 0, ofs, status_old))
- can_be_top = false;
-
- /* If anything above us is locked, we can't use 'bottom' protection */
- if (!stm_is_unlocked_sr(nor, ofs + len, mtd->size - (ofs + len),
- status_old))
- can_be_bottom = false;
-
- if (!can_be_bottom && !can_be_top)
- return -EINVAL;
-
- /* Prefer top, if both are valid */
- use_top = can_be_top;
-
- /* lock_len: length of region that should remain locked */
- if (use_top)
- lock_len = mtd->size - (ofs + len);
- else
- lock_len = ofs;
-
- if (nor->flags & SNOR_F_HAS_SR_TB_BIT6)
- tb_mask = SR_TB_BIT6;
- /*
- * Need largest pow such that:
- *
- * 1 / (2^pow) >= (len / size)
- *
- * so (assuming power-of-2 size) we do:
- *
- * pow = floor(log2(size / len)) = log2(size) - ceil(log2(len))
- */
- pow = ilog2(mtd->size) - order_base_2(lock_len);
- if (lock_len == 0) {
- val = 0; /* fully unlocked */
- } else {
- val = mask - (pow << shift);
- /* Some power-of-two sizes are not supported */
- if (val & ~mask)
- return -EINVAL;
- }
-
- status_new = (status_old & ~mask & ~tb_mask) | val;
-
- /* Don't protect status register if we're fully unlocked */
- if (lock_len == 0)
- status_new &= ~SR_SRWD;
-
- if (!use_top)
- status_new |= tb_mask;
-
- /* Don't bother if they're the same */
- if (status_new == status_old)
- return 0;
-
- /* Only modify protection if it will not lock other areas */
- if ((status_new & mask) > (status_old & mask))
- return -EINVAL;
-
- return spi_nor_write_sr_and_check(nor, status_new);
-}
-
-/*
- * Check if a region of the flash is (completely) locked. See stm_lock() for
- * more info.
- *
- * Returns 1 if entire region is locked, 0 if any portion is unlocked, and
- * negative on errors.
- */
-static int stm_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len)
-{
- int ret;
-
- ret = spi_nor_read_sr(nor, nor->bouncebuf);
- if (ret)
- return ret;
-
- return stm_is_locked_sr(nor, ofs, len, nor->bouncebuf[0]);
-}
-
-static const struct spi_nor_locking_ops stm_locking_ops = {
- .lock = stm_lock,
- .unlock = stm_unlock,
- .is_locked = stm_is_locked,
-};
-
-static int spi_nor_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
-{
- struct spi_nor *nor = mtd_to_spi_nor(mtd);
- int ret;
-
- ret = spi_nor_lock_and_prep(nor);
- if (ret)
- return ret;
-
- ret = nor->params.locking_ops->lock(nor, ofs, len);
-
- spi_nor_unlock_and_unprep(nor);
- return ret;
-}
-
-static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
-{
- struct spi_nor *nor = mtd_to_spi_nor(mtd);
- int ret;
-
- ret = spi_nor_lock_and_prep(nor);
- if (ret)
- return ret;
-
- ret = nor->params.locking_ops->unlock(nor, ofs, len);
-
- spi_nor_unlock_and_unprep(nor);
- return ret;
-}
-
-static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
-{
- struct spi_nor *nor = mtd_to_spi_nor(mtd);
- int ret;
-
- ret = spi_nor_lock_and_prep(nor);
- if (ret)
- return ret;
-
- ret = nor->params.locking_ops->is_locked(nor, ofs, len);
-
- spi_nor_unlock_and_unprep(nor);
- return ret;
-}
-
-/**
- * spi_nor_sr1_bit6_quad_enable() - Set the Quad Enable BIT(6) in the Status
- * Register 1.
- * @nor: pointer to a 'struct spi_nor'
- *
- * Bit 6 of the Status Register 1 is the QE bit for Macronix like QSPI memories.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor)
-{
- int ret;
-
- ret = spi_nor_read_sr(nor, nor->bouncebuf);
- if (ret)
- return ret;
-
- if (nor->bouncebuf[0] & SR1_QUAD_EN_BIT6)
- return 0;
-
- nor->bouncebuf[0] |= SR1_QUAD_EN_BIT6;
-
- return spi_nor_write_sr1_and_check(nor, nor->bouncebuf[0]);
-}
-
-/**
- * spi_nor_sr2_bit1_quad_enable() - set the Quad Enable BIT(1) in the Status
- * Register 2.
- * @nor: pointer to a 'struct spi_nor'.
- *
- * Bit 1 of the Status Register 2 is the QE bit for Spansion like QSPI memories.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor)
-{
- int ret;
-
- if (nor->flags & SNOR_F_NO_READ_CR)
- return spi_nor_write_16bit_cr_and_check(nor, SR2_QUAD_EN_BIT1);
-
- ret = spi_nor_read_cr(nor, nor->bouncebuf);
- if (ret)
- return ret;
-
- if (nor->bouncebuf[0] & SR2_QUAD_EN_BIT1)
- return 0;
-
- nor->bouncebuf[0] |= SR2_QUAD_EN_BIT1;
-
- return spi_nor_write_16bit_cr_and_check(nor, nor->bouncebuf[0]);
-}
-
-/**
- * spi_nor_sr2_bit7_quad_enable() - set QE bit in Status Register 2.
- * @nor: pointer to a 'struct spi_nor'
- *
- * Set the Quad Enable (QE) bit in the Status Register 2.
- *
- * This is one of the procedures to set the QE bit described in the SFDP
- * (JESD216 rev B) specification but no manufacturer using this procedure has
- * been identified yet, hence the name of the function.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
-{
- u8 *sr2 = nor->bouncebuf;
- int ret;
- u8 sr2_written;
-
- /* Check current Quad Enable bit value. */
- ret = spi_nor_read_sr2(nor, sr2);
- if (ret)
- return ret;
- if (*sr2 & SR2_QUAD_EN_BIT7)
- return 0;
-
- /* Update the Quad Enable bit. */
- *sr2 |= SR2_QUAD_EN_BIT7;
-
- ret = spi_nor_write_sr2(nor, sr2);
- if (ret)
- return ret;
-
- sr2_written = *sr2;
-
- /* Read back and check it. */
- ret = spi_nor_read_sr2(nor, sr2);
- if (ret)
- return ret;
-
- if (*sr2 != sr2_written) {
- dev_dbg(nor->dev, "SR2: Read back test failed\n");
- return -EIO;
- }
-
- return 0;
-}
-
-/* Used when the "_ext_id" is two bytes at most */
-#define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
- .id = { \
- ((_jedec_id) >> 16) & 0xff, \
- ((_jedec_id) >> 8) & 0xff, \
- (_jedec_id) & 0xff, \
- ((_ext_id) >> 8) & 0xff, \
- (_ext_id) & 0xff, \
- }, \
- .id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))), \
- .sector_size = (_sector_size), \
- .n_sectors = (_n_sectors), \
- .page_size = 256, \
- .flags = (_flags),
-
-#define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \
- .id = { \
- ((_jedec_id) >> 16) & 0xff, \
- ((_jedec_id) >> 8) & 0xff, \
- (_jedec_id) & 0xff, \
- ((_ext_id) >> 16) & 0xff, \
- ((_ext_id) >> 8) & 0xff, \
- (_ext_id) & 0xff, \
- }, \
- .id_len = 6, \
- .sector_size = (_sector_size), \
- .n_sectors = (_n_sectors), \
- .page_size = 256, \
- .flags = (_flags),
-
-#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags) \
- .sector_size = (_sector_size), \
- .n_sectors = (_n_sectors), \
- .page_size = (_page_size), \
- .addr_width = (_addr_width), \
- .flags = (_flags),
-
-#define S3AN_INFO(_jedec_id, _n_sectors, _page_size) \
- .id = { \
- ((_jedec_id) >> 16) & 0xff, \
- ((_jedec_id) >> 8) & 0xff, \
- (_jedec_id) & 0xff \
- }, \
- .id_len = 3, \
- .sector_size = (8*_page_size), \
- .n_sectors = (_n_sectors), \
- .page_size = _page_size, \
- .addr_width = 3, \
- .flags = SPI_NOR_NO_FR | SPI_S3AN,
-
-static int
-is25lp256_post_bfpt_fixups(struct spi_nor *nor,
- const struct sfdp_parameter_header *bfpt_header,
- const struct sfdp_bfpt *bfpt,
- struct spi_nor_flash_parameter *params)
-{
- /*
- * IS25LP256 supports 4B opcodes, but the BFPT advertises a
- * BFPT_DWORD1_ADDRESS_BYTES_3_ONLY address width.
- * Overwrite the address width advertised by the BFPT.
- */
- if ((bfpt->dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) ==
- BFPT_DWORD1_ADDRESS_BYTES_3_ONLY)
- nor->addr_width = 4;
-
- return 0;
-}
-
-static struct spi_nor_fixups is25lp256_fixups = {
- .post_bfpt = is25lp256_post_bfpt_fixups,
-};
-
-static int
-mx25l25635_post_bfpt_fixups(struct spi_nor *nor,
- const struct sfdp_parameter_header *bfpt_header,
- const struct sfdp_bfpt *bfpt,
- struct spi_nor_flash_parameter *params)
-{
- /*
- * MX25L25635F supports 4B opcodes but MX25L25635E does not.
- * Unfortunately, Macronix has re-used the same JEDEC ID for both
- * variants which prevents us from defining a new entry in the parts
- * table.
- * We need a way to differentiate MX25L25635E and MX25L25635F, and it
- * seems that the F version advertises support for Fast Read 4-4-4 in
- * its BFPT table.
- */
- if (bfpt->dwords[BFPT_DWORD(5)] & BFPT_DWORD5_FAST_READ_4_4_4)
- nor->flags |= SNOR_F_4B_OPCODES;
-
- return 0;
-}
-
-static struct spi_nor_fixups mx25l25635_fixups = {
- .post_bfpt = mx25l25635_post_bfpt_fixups,
-};
-
-static void gd25q256_default_init(struct spi_nor *nor)
-{
- /*
- * Some manufacturer like GigaDevice may use different
- * bit to set QE on different memories, so the MFR can't
- * indicate the quad_enable method for this case, we need
- * to set it in the default_init fixup hook.
- */
- nor->params.quad_enable = spi_nor_sr1_bit6_quad_enable;
-}
-
-static struct spi_nor_fixups gd25q256_fixups = {
- .default_init = gd25q256_default_init,
-};
-
-/* NOTE: double check command sets and memory organization when you add
- * more nor chips. This current list focusses on newer chips, which
- * have been converging on command sets which including JEDEC ID.
- *
- * All newly added entries should describe *hardware* and should use SECT_4K
- * (or SECT_4K_PMC) if hardware supports erasing 4 KiB sectors. For usage
- * scenarios excluding small sectors there is config option that can be
- * disabled: CONFIG_MTD_SPI_NOR_USE_4K_SECTORS.
- * For historical (and compatibility) reasons (before we got above config) some
- * old entries may be missing 4K flag.
- */
-static const struct flash_info spi_nor_ids[] = {
- /* Atmel -- some are (confusingly) marketed as "DataFlash" */
- { "at25fs010", INFO(0x1f6601, 0, 32 * 1024, 4, SECT_4K) },
- { "at25fs040", INFO(0x1f6604, 0, 64 * 1024, 8, SECT_4K) },
-
- { "at25df041a", INFO(0x1f4401, 0, 64 * 1024, 8, SECT_4K) },
- { "at25df321", INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K) },
- { "at25df321a", INFO(0x1f4701, 0, 64 * 1024, 64, SECT_4K) },
- { "at25df641", INFO(0x1f4800, 0, 64 * 1024, 128, SECT_4K) },
-
- { "at25sl321", INFO(0x1f4216, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-
- { "at26f004", INFO(0x1f0400, 0, 64 * 1024, 8, SECT_4K) },
- { "at26df081a", INFO(0x1f4501, 0, 64 * 1024, 16, SECT_4K) },
- { "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) },
- { "at26df321", INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K) },
-
- { "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) },
-
- /* EON -- en25xxx */
- { "en25f32", INFO(0x1c3116, 0, 64 * 1024, 64, SECT_4K) },
- { "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) },
- { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) },
- { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
- { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) },
- { "en25q80a", INFO(0x1c3014, 0, 64 * 1024, 16,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "en25qh16", INFO(0x1c7015, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "en25qh32", INFO(0x1c7016, 0, 64 * 1024, 64, 0) },
- { "en25qh64", INFO(0x1c7017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "en25qh128", INFO(0x1c7018, 0, 64 * 1024, 256, 0) },
- { "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) },
- { "en25s64", INFO(0x1c3817, 0, 64 * 1024, 128, SECT_4K) },
-
- /* ESMT */
- { "f25l32pa", INFO(0x8c2016, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_HAS_LOCK) },
- { "f25l32qa", INFO(0x8c4116, 0, 64 * 1024, 64, SECT_4K | SPI_NOR_HAS_LOCK) },
- { "f25l64qa", INFO(0x8c4117, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_HAS_LOCK) },
-
- /* Everspin */
- { "mr25h128", CAT25_INFO( 16 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- { "mr25h10", CAT25_INFO(128 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- { "mr25h40", CAT25_INFO(512 * 1024, 1, 256, 3, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-
- /* Fujitsu */
- { "mb85rs1mt", INFO(0x047f27, 0, 128 * 1024, 1, SPI_NOR_NO_ERASE) },
-
- /* GigaDevice */
- {
- "gd25q16", INFO(0xc84015, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- {
- "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- {
- "gd25lq32", INFO(0xc86016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- {
- "gd25q64", INFO(0xc84017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- {
- "gd25lq64c", INFO(0xc86017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- {
- "gd25lq128d", INFO(0xc86018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- {
- "gd25q128", INFO(0xc84018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- {
- "gd25q256", INFO(0xc84019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB |
- SPI_NOR_TB_SR_BIT6)
- .fixups = &gd25q256_fixups,
- },
-
- /* Intel/Numonyx -- xxxs33b */
- { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) },
- { "320s33b", INFO(0x898912, 0, 64 * 1024, 64, 0) },
- { "640s33b", INFO(0x898913, 0, 64 * 1024, 128, 0) },
-
- /* ISSI */
- { "is25cd512", INFO(0x7f9d20, 0, 32 * 1024, 2, SECT_4K) },
- { "is25lq040b", INFO(0x9d4013, 0, 64 * 1024, 8,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "is25lp016d", INFO(0x9d6015, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "is25lp080d", INFO(0x9d6014, 0, 64 * 1024, 16,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "is25lp032", INFO(0x9d6016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "is25lp064", INFO(0x9d6017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "is25lp128", INFO(0x9d6018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ) },
- { "is25lp256", INFO(0x9d6019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_4B_OPCODES)
- .fixups = &is25lp256_fixups },
- { "is25wp032", INFO(0x9d7016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "is25wp064", INFO(0x9d7017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "is25wp128", INFO(0x9d7018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "is25wp256", INFO(0x9d7019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_4B_OPCODES)
- .fixups = &is25lp256_fixups },
-
- /* Macronix */
- { "mx25l512e", INFO(0xc22010, 0, 64 * 1024, 1, SECT_4K) },
- { "mx25l2005a", INFO(0xc22012, 0, 64 * 1024, 4, SECT_4K) },
- { "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) },
- { "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) },
- { "mx25l1606e", INFO(0xc22015, 0, 64 * 1024, 32, SECT_4K) },
- { "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, SECT_4K) },
- { "mx25l3255e", INFO(0xc29e16, 0, 64 * 1024, 64, SECT_4K) },
- { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) },
- { "mx25u2033e", INFO(0xc22532, 0, 64 * 1024, 4, SECT_4K) },
- { "mx25u3235f", INFO(0xc22536, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "mx25u4035", INFO(0xc22533, 0, 64 * 1024, 8, SECT_4K) },
- { "mx25u8035", INFO(0xc22534, 0, 64 * 1024, 16, SECT_4K) },
- { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
- { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
- { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
- { "mx25r3235f", INFO(0xc22816, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
- .fixups = &mx25l25635_fixups },
- { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
- { "mx25v8035f", INFO(0xc22314, 0, 64 * 1024, 16,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
- { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "mx66l1g45g", INFO(0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) },
-
- /* Micron <--> ST Micro */
- { "n25q016a", INFO(0x20bb15, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_QUAD_READ) },
- { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) },
- { "n25q032a", INFO(0x20bb16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) },
- { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) },
- { "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) },
- { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SECT_4K |
- USE_FSR | SPI_NOR_QUAD_READ) },
- { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SECT_4K |
- USE_FSR | SPI_NOR_QUAD_READ) },
- { "mt25ql256a", INFO6(0x20ba19, 0x104400, 64 * 1024, 512,
- SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K |
- USE_FSR | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ) },
- { "mt25qu256a", INFO6(0x20bb19, 0x104400, 64 * 1024, 512,
- SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "n25q256ax1", INFO(0x20bb19, 0, 64 * 1024, 512, SECT_4K |
- USE_FSR | SPI_NOR_QUAD_READ) },
- { "mt25ql512a", INFO6(0x20ba20, 0x104400, 64 * 1024, 1024,
- SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
- { "mt25qu512a", INFO6(0x20bb20, 0x104400, 64 * 1024, 1024,
- SECT_4K | USE_FSR | SPI_NOR_DUAL_READ |
- SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K |
- USE_FSR | SPI_NOR_QUAD_READ) },
- { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
- { "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
- { "mt25ql02g", INFO(0x20ba22, 0, 64 * 1024, 4096,
- SECT_4K | USE_FSR | SPI_NOR_QUAD_READ |
- NO_CHIP_ERASE) },
- { "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ | NO_CHIP_ERASE) },
-
- /* Micron */
- {
- "mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512,
- SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
- SPI_NOR_4B_OPCODES)
- },
- { "mt35xu02g", INFO(0x2c5b1c, 0, 128 * 1024, 2048,
- SECT_4K | USE_FSR | SPI_NOR_OCTAL_READ |
- SPI_NOR_4B_OPCODES) },
-
- /* PMC */
- { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) },
- { "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) },
- { "pm25lq032", INFO(0x7f9d46, 0, 64 * 1024, 64, SECT_4K) },
-
- /* Spansion/Cypress -- single (large) sector size only, at least
- * for the chips listed here (without boot sectors).
- */
- { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl128s0", INFO6(0x012018, 0x4d0080, 256 * 1024, 64,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
- { "s25fl128s1", INFO6(0x012018, 0x4d0180, 64 * 1024, 256,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
- { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, USE_CLSR) },
- { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
- { "s25fl512s", INFO6(0x010220, 0x4d0080, 256 * 1024, 256,
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | USE_CLSR) },
- { "s25fs512s", INFO6(0x010220, 0x4d0081, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
- { "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) },
- { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) },
- { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) },
- { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
- { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | USE_CLSR) },
- { "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) },
- { "s25sl008a", INFO(0x010213, 0, 64 * 1024, 16, 0) },
- { "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32, 0) },
- { "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64, 0) },
- { "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128, 0) },
- { "s25fl004k", INFO(0xef4013, 0, 64 * 1024, 8, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl008k", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
- { "s25fl116k", INFO(0x014015, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "s25fl132k", INFO(0x014016, 0, 64 * 1024, 64, SECT_4K) },
- { "s25fl164k", INFO(0x014017, 0, 64 * 1024, 128, SECT_4K) },
- { "s25fl204k", INFO(0x014013, 0, 64 * 1024, 8, SECT_4K | SPI_NOR_DUAL_READ) },
- { "s25fl208k", INFO(0x014014, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_DUAL_READ) },
- { "s25fl064l", INFO(0x016017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "s25fl128l", INFO(0x016018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
- { "s25fl256l", INFO(0x016019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
-
- /* SST -- large erase sizes are "overlays", "sectors" are 4K */
- { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) },
- { "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
- { "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32, SECT_4K | SST_WRITE) },
- { "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64, SECT_4K | SST_WRITE) },
- { "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128, SECT_4K) },
- { "sst25wf512", INFO(0xbf2501, 0, 64 * 1024, 1, SECT_4K | SST_WRITE) },
- { "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2, SECT_4K | SST_WRITE) },
- { "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4, SECT_4K | SST_WRITE) },
- { "sst25wf020a", INFO(0x621612, 0, 64 * 1024, 4, SECT_4K) },
- { "sst25wf040b", INFO(0x621613, 0, 64 * 1024, 8, SECT_4K) },
- { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) },
- { "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
- { "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32, SECT_4K |
- SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "sst26vf016b", INFO(0xbf2641, 0, 64 * 1024, 32, SECT_4K |
- SPI_NOR_DUAL_READ) },
- { "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-
- /* ST Microelectronics -- newer production may have feature updates */
- { "m25p05", INFO(0x202010, 0, 32 * 1024, 2, 0) },
- { "m25p10", INFO(0x202011, 0, 32 * 1024, 4, 0) },
- { "m25p20", INFO(0x202012, 0, 64 * 1024, 4, 0) },
- { "m25p40", INFO(0x202013, 0, 64 * 1024, 8, 0) },
- { "m25p80", INFO(0x202014, 0, 64 * 1024, 16, 0) },
- { "m25p16", INFO(0x202015, 0, 64 * 1024, 32, 0) },
- { "m25p32", INFO(0x202016, 0, 64 * 1024, 64, 0) },
- { "m25p64", INFO(0x202017, 0, 64 * 1024, 128, 0) },
- { "m25p128", INFO(0x202018, 0, 256 * 1024, 64, 0) },
-
- { "m25p05-nonjedec", INFO(0, 0, 32 * 1024, 2, 0) },
- { "m25p10-nonjedec", INFO(0, 0, 32 * 1024, 4, 0) },
- { "m25p20-nonjedec", INFO(0, 0, 64 * 1024, 4, 0) },
- { "m25p40-nonjedec", INFO(0, 0, 64 * 1024, 8, 0) },
- { "m25p80-nonjedec", INFO(0, 0, 64 * 1024, 16, 0) },
- { "m25p16-nonjedec", INFO(0, 0, 64 * 1024, 32, 0) },
- { "m25p32-nonjedec", INFO(0, 0, 64 * 1024, 64, 0) },
- { "m25p64-nonjedec", INFO(0, 0, 64 * 1024, 128, 0) },
- { "m25p128-nonjedec", INFO(0, 0, 256 * 1024, 64, 0) },
-
- { "m45pe10", INFO(0x204011, 0, 64 * 1024, 2, 0) },
- { "m45pe80", INFO(0x204014, 0, 64 * 1024, 16, 0) },
- { "m45pe16", INFO(0x204015, 0, 64 * 1024, 32, 0) },
-
- { "m25pe20", INFO(0x208012, 0, 64 * 1024, 4, 0) },
- { "m25pe80", INFO(0x208014, 0, 64 * 1024, 16, 0) },
- { "m25pe16", INFO(0x208015, 0, 64 * 1024, 32, SECT_4K) },
-
- { "m25px16", INFO(0x207115, 0, 64 * 1024, 32, SECT_4K) },
- { "m25px32", INFO(0x207116, 0, 64 * 1024, 64, SECT_4K) },
- { "m25px32-s0", INFO(0x207316, 0, 64 * 1024, 64, SECT_4K) },
- { "m25px32-s1", INFO(0x206316, 0, 64 * 1024, 64, SECT_4K) },
- { "m25px64", INFO(0x207117, 0, 64 * 1024, 128, 0) },
- { "m25px80", INFO(0x207114, 0, 64 * 1024, 16, 0) },
-
- /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
- { "w25x05", INFO(0xef3010, 0, 64 * 1024, 1, SECT_4K) },
- { "w25x10", INFO(0xef3011, 0, 64 * 1024, 2, SECT_4K) },
- { "w25x20", INFO(0xef3012, 0, 64 * 1024, 4, SECT_4K) },
- { "w25x40", INFO(0xef3013, 0, 64 * 1024, 8, SECT_4K) },
- { "w25x80", INFO(0xef3014, 0, 64 * 1024, 16, SECT_4K) },
- { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) },
- {
- "w25q16dw", INFO(0xef6015, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) },
- {
- "w25q16jv-im/jm", INFO(0xef7015, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- { "w25q20cl", INFO(0xef4012, 0, 64 * 1024, 4, SECT_4K) },
- { "w25q20bw", INFO(0xef5012, 0, 64 * 1024, 4, SECT_4K) },
- { "w25q20ew", INFO(0xef6012, 0, 64 * 1024, 4, SECT_4K) },
- { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) },
- {
- "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- {
- "w25q32jv", INFO(0xef7016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- {
- "w25q32jwm", INFO(0xef8016, 0, 64 * 1024, 64,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
- { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
- {
- "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- {
- "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- {
- "w25q128jv", INFO(0xef7018, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
- { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
- { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
- { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
- { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_4B_OPCODES) },
- { "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
- SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
-
- /* Catalyst / On Semiconductor -- non-JEDEC */
- { "cat25c11", CAT25_INFO( 16, 8, 16, 1, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- { "cat25c03", CAT25_INFO( 32, 8, 16, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- { "cat25c09", CAT25_INFO( 128, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- { "cat25c17", CAT25_INFO( 256, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
- { "cat25128", CAT25_INFO(2048, 8, 64, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
-
- /* Xilinx S3AN Internal Flash */
- { "3S50AN", S3AN_INFO(0x1f2200, 64, 264) },
- { "3S200AN", S3AN_INFO(0x1f2400, 256, 264) },
- { "3S400AN", S3AN_INFO(0x1f2400, 256, 264) },
- { "3S700AN", S3AN_INFO(0x1f2500, 512, 264) },
- { "3S1400AN", S3AN_INFO(0x1f2600, 512, 528) },
-
- /* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
- { "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { },
-};
-
-static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
-{
- int tmp;
- u8 *id = nor->bouncebuf;
- const struct flash_info *info;
-
- if (nor->spimem) {
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDID, 1),
- SPI_MEM_OP_NO_ADDR,
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_DATA_IN(SPI_NOR_MAX_ID_LEN, id, 1));
-
- tmp = spi_mem_exec_op(nor->spimem, &op);
- } else {
- tmp = nor->controller_ops->read_reg(nor, SPINOR_OP_RDID, id,
- SPI_NOR_MAX_ID_LEN);
- }
- if (tmp) {
- dev_dbg(nor->dev, "error %d reading JEDEC ID\n", tmp);
- return ERR_PTR(tmp);
- }
-
- for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
- info = &spi_nor_ids[tmp];
- if (info->id_len) {
- if (!memcmp(info->id, id, info->id_len))
- return &spi_nor_ids[tmp];
- }
- }
- dev_err(nor->dev, "unrecognized JEDEC id bytes: %*ph\n",
- SPI_NOR_MAX_ID_LEN, id);
- return ERR_PTR(-ENODEV);
-}
-
-static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf)
-{
- struct spi_nor *nor = mtd_to_spi_nor(mtd);
- ssize_t ret;
-
- dev_dbg(nor->dev, "from 0x%08x, len %zd\n", (u32)from, len);
-
- ret = spi_nor_lock_and_prep(nor);
- if (ret)
- return ret;
-
- while (len) {
- loff_t addr = from;
-
- addr = spi_nor_convert_addr(nor, addr);
-
- ret = spi_nor_read_data(nor, addr, len, buf);
- if (ret == 0) {
- /* We shouldn't see 0-length reads */
- ret = -EIO;
- goto read_err;
- }
- if (ret < 0)
- goto read_err;
-
- WARN_ON(ret > len);
- *retlen += ret;
- buf += ret;
- from += ret;
- len -= ret;
- }
- ret = 0;
-
-read_err:
- spi_nor_unlock_and_unprep(nor);
- return ret;
-}
-
-static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
-{
- struct spi_nor *nor = mtd_to_spi_nor(mtd);
- size_t actual = 0;
- int ret;
-
- dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
-
- ret = spi_nor_lock_and_prep(nor);
- if (ret)
- return ret;
-
- ret = spi_nor_write_enable(nor);
- if (ret)
- goto out;
-
- nor->sst_write_second = false;
-
- /* Start write from odd address. */
- if (to % 2) {
- nor->program_opcode = SPINOR_OP_BP;
-
- /* write one byte. */
- ret = spi_nor_write_data(nor, to, 1, buf);
- if (ret < 0)
- goto out;
- WARN(ret != 1, "While writing 1 byte written %i bytes\n", ret);
- ret = spi_nor_wait_till_ready(nor);
- if (ret)
- goto out;
-
- to++;
- actual++;
- }
-
- /* Write out most of the data here. */
- for (; actual < len - 1; actual += 2) {
- nor->program_opcode = SPINOR_OP_AAI_WP;
-
- /* write two bytes. */
- ret = spi_nor_write_data(nor, to, 2, buf + actual);
- if (ret < 0)
- goto out;
- WARN(ret != 2, "While writing 2 bytes written %i bytes\n", ret);
- ret = spi_nor_wait_till_ready(nor);
- if (ret)
- goto out;
- to += 2;
- nor->sst_write_second = true;
- }
- nor->sst_write_second = false;
-
- ret = spi_nor_write_disable(nor);
- if (ret)
- goto out;
-
- ret = spi_nor_wait_till_ready(nor);
- if (ret)
- goto out;
-
- /* Write out trailing byte if it exists. */
- if (actual != len) {
- ret = spi_nor_write_enable(nor);
- if (ret)
- goto out;
-
- nor->program_opcode = SPINOR_OP_BP;
- ret = spi_nor_write_data(nor, to, 1, buf + actual);
- if (ret < 0)
- goto out;
- WARN(ret != 1, "While writing 1 byte written %i bytes\n", ret);
- ret = spi_nor_wait_till_ready(nor);
- if (ret)
- goto out;
-
- actual += 1;
-
- ret = spi_nor_write_disable(nor);
- }
-out:
- *retlen += actual;
- spi_nor_unlock_and_unprep(nor);
- return ret;
-}
-
-/*
- * Write an address range to the nor chip. Data must be written in
- * FLASH_PAGESIZE chunks. The address range may be any size provided
- * it is within the physical boundaries.
- */
-static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
-{
- struct spi_nor *nor = mtd_to_spi_nor(mtd);
- size_t page_offset, page_remain, i;
- ssize_t ret;
-
- dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
-
- ret = spi_nor_lock_and_prep(nor);
- if (ret)
- return ret;
-
- for (i = 0; i < len; ) {
- ssize_t written;
- loff_t addr = to + i;
-
- /*
- * If page_size is a power of two, the offset can be quickly
- * calculated with an AND operation. On the other cases we
- * need to do a modulus operation (more expensive).
- * Power of two numbers have only one bit set and we can use
- * the instruction hweight32 to detect if we need to do a
- * modulus (do_div()) or not.
- */
- if (hweight32(nor->page_size) == 1) {
- page_offset = addr & (nor->page_size - 1);
- } else {
- uint64_t aux = addr;
-
- page_offset = do_div(aux, nor->page_size);
- }
- /* the size of data remaining on the first page */
- page_remain = min_t(size_t,
- nor->page_size - page_offset, len - i);
-
- addr = spi_nor_convert_addr(nor, addr);
-
- ret = spi_nor_write_enable(nor);
- if (ret)
- goto write_err;
-
- ret = spi_nor_write_data(nor, addr, page_remain, buf + i);
- if (ret < 0)
- goto write_err;
- written = ret;
-
- ret = spi_nor_wait_till_ready(nor);
- if (ret)
- goto write_err;
- *retlen += written;
- i += written;
- }
-
-write_err:
- spi_nor_unlock_and_unprep(nor);
- return ret;
-}
-
-static int spi_nor_check(struct spi_nor *nor)
-{
- if (!nor->dev ||
- (!nor->spimem && !nor->controller_ops) ||
- (!nor->spimem && nor->controller_ops &&
- (!nor->controller_ops->read ||
- !nor->controller_ops->write ||
- !nor->controller_ops->read_reg ||
- !nor->controller_ops->write_reg))) {
- pr_err("spi-nor: please fill all the necessary fields!\n");
- return -EINVAL;
- }
-
- if (nor->spimem && nor->controller_ops) {
- dev_err(nor->dev, "nor->spimem and nor->controller_ops are mutually exclusive, please set just one of them.\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int s3an_nor_setup(struct spi_nor *nor,
- const struct spi_nor_hwcaps *hwcaps)
-{
- int ret;
-
- ret = spi_nor_xread_sr(nor, nor->bouncebuf);
- if (ret)
- return ret;
-
- nor->erase_opcode = SPINOR_OP_XSE;
- nor->program_opcode = SPINOR_OP_XPP;
- nor->read_opcode = SPINOR_OP_READ;
- nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
-
- /*
- * This flashes have a page size of 264 or 528 bytes (known as
- * Default addressing mode). It can be changed to a more standard
- * Power of two mode where the page size is 256/512. This comes
- * with a price: there is 3% less of space, the data is corrupted
- * and the page size cannot be changed back to default addressing
- * mode.
- *
- * The current addressing mode can be read from the XRDSR register
- * and should not be changed, because is a destructive operation.
- */
- if (nor->bouncebuf[0] & XSR_PAGESIZE) {
- /* Flash in Power of 2 mode */
- nor->page_size = (nor->page_size == 264) ? 256 : 512;
- nor->mtd.writebufsize = nor->page_size;
- nor->mtd.size = 8 * nor->page_size * nor->info->n_sectors;
- nor->mtd.erasesize = 8 * nor->page_size;
- } else {
- /* Flash in Default addressing mode */
- nor->params.convert_addr = s3an_convert_addr;
- nor->mtd.erasesize = nor->info->sector_size;
- }
-
- return 0;
-}
-
-static void
-spi_nor_set_read_settings(struct spi_nor_read_command *read,
- u8 num_mode_clocks,
- u8 num_wait_states,
- u8 opcode,
- enum spi_nor_protocol proto)
-{
- read->num_mode_clocks = num_mode_clocks;
- read->num_wait_states = num_wait_states;
- read->opcode = opcode;
- read->proto = proto;
-}
-
-static void
-spi_nor_set_pp_settings(struct spi_nor_pp_command *pp,
- u8 opcode,
- enum spi_nor_protocol proto)
-{
- pp->opcode = opcode;
- pp->proto = proto;
-}
-
-static int spi_nor_hwcaps2cmd(u32 hwcaps, const int table[][2], size_t size)
-{
- size_t i;
-
- for (i = 0; i < size; i++)
- if (table[i][0] == (int)hwcaps)
- return table[i][1];
-
- return -EINVAL;
-}
-
-static int spi_nor_hwcaps_read2cmd(u32 hwcaps)
-{
- static const int hwcaps_read2cmd[][2] = {
- { SNOR_HWCAPS_READ, SNOR_CMD_READ },
- { SNOR_HWCAPS_READ_FAST, SNOR_CMD_READ_FAST },
- { SNOR_HWCAPS_READ_1_1_1_DTR, SNOR_CMD_READ_1_1_1_DTR },
- { SNOR_HWCAPS_READ_1_1_2, SNOR_CMD_READ_1_1_2 },
- { SNOR_HWCAPS_READ_1_2_2, SNOR_CMD_READ_1_2_2 },
- { SNOR_HWCAPS_READ_2_2_2, SNOR_CMD_READ_2_2_2 },
- { SNOR_HWCAPS_READ_1_2_2_DTR, SNOR_CMD_READ_1_2_2_DTR },
- { SNOR_HWCAPS_READ_1_1_4, SNOR_CMD_READ_1_1_4 },
- { SNOR_HWCAPS_READ_1_4_4, SNOR_CMD_READ_1_4_4 },
- { SNOR_HWCAPS_READ_4_4_4, SNOR_CMD_READ_4_4_4 },
- { SNOR_HWCAPS_READ_1_4_4_DTR, SNOR_CMD_READ_1_4_4_DTR },
- { SNOR_HWCAPS_READ_1_1_8, SNOR_CMD_READ_1_1_8 },
- { SNOR_HWCAPS_READ_1_8_8, SNOR_CMD_READ_1_8_8 },
- { SNOR_HWCAPS_READ_8_8_8, SNOR_CMD_READ_8_8_8 },
- { SNOR_HWCAPS_READ_1_8_8_DTR, SNOR_CMD_READ_1_8_8_DTR },
- };
-
- return spi_nor_hwcaps2cmd(hwcaps, hwcaps_read2cmd,
- ARRAY_SIZE(hwcaps_read2cmd));
-}
-
-static int spi_nor_hwcaps_pp2cmd(u32 hwcaps)
-{
- static const int hwcaps_pp2cmd[][2] = {
- { SNOR_HWCAPS_PP, SNOR_CMD_PP },
- { SNOR_HWCAPS_PP_1_1_4, SNOR_CMD_PP_1_1_4 },
- { SNOR_HWCAPS_PP_1_4_4, SNOR_CMD_PP_1_4_4 },
- { SNOR_HWCAPS_PP_4_4_4, SNOR_CMD_PP_4_4_4 },
- { SNOR_HWCAPS_PP_1_1_8, SNOR_CMD_PP_1_1_8 },
- { SNOR_HWCAPS_PP_1_8_8, SNOR_CMD_PP_1_8_8 },
- { SNOR_HWCAPS_PP_8_8_8, SNOR_CMD_PP_8_8_8 },
- };
-
- return spi_nor_hwcaps2cmd(hwcaps, hwcaps_pp2cmd,
- ARRAY_SIZE(hwcaps_pp2cmd));
-}
-
-/*
- * Serial Flash Discoverable Parameters (SFDP) parsing.
- */
-
-/**
- * spi_nor_read_raw() - raw read of serial flash memory. read_opcode,
- * addr_width and read_dummy members of the struct spi_nor
- * should be previously
- * set.
- * @nor: pointer to a 'struct spi_nor'
- * @addr: offset in the serial flash memory
- * @len: number of bytes to read
- * @buf: buffer where the data is copied into (dma-safe memory)
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_read_raw(struct spi_nor *nor, u32 addr, size_t len, u8 *buf)
-{
- ssize_t ret;
-
- while (len) {
- ret = spi_nor_read_data(nor, addr, len, buf);
- if (ret < 0)
- return ret;
- if (!ret || ret > len)
- return -EIO;
-
- buf += ret;
- addr += ret;
- len -= ret;
- }
- return 0;
-}
-
-/**
- * spi_nor_read_sfdp() - read Serial Flash Discoverable Parameters.
- * @nor: pointer to a 'struct spi_nor'
- * @addr: offset in the SFDP area to start reading data from
- * @len: number of bytes to read
- * @buf: buffer where the SFDP data are copied into (dma-safe memory)
- *
- * Whatever the actual numbers of bytes for address and dummy cycles are
- * for (Fast) Read commands, the Read SFDP (5Ah) instruction is always
- * followed by a 3-byte address and 8 dummy clock cycles.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_read_sfdp(struct spi_nor *nor, u32 addr,
- size_t len, void *buf)
-{
- u8 addr_width, read_opcode, read_dummy;
- int ret;
-
- read_opcode = nor->read_opcode;
- addr_width = nor->addr_width;
- read_dummy = nor->read_dummy;
-
- nor->read_opcode = SPINOR_OP_RDSFDP;
- nor->addr_width = 3;
- nor->read_dummy = 8;
-
- ret = spi_nor_read_raw(nor, addr, len, buf);
-
- nor->read_opcode = read_opcode;
- nor->addr_width = addr_width;
- nor->read_dummy = read_dummy;
-
- return ret;
-}
-
-/**
- * spi_nor_spimem_check_op - check if the operation is supported
- * by controller
- *@nor: pointer to a 'struct spi_nor'
- *@op: pointer to op template to be checked
- *
- * Returns 0 if operation is supported, -ENOTSUPP otherwise.
- */
-static int spi_nor_spimem_check_op(struct spi_nor *nor,
- struct spi_mem_op *op)
-{
- /*
- * First test with 4 address bytes. The opcode itself might
- * be a 3B addressing opcode but we don't care, because
- * SPI controller implementation should not check the opcode,
- * but just the sequence.
- */
- op->addr.nbytes = 4;
- if (!spi_mem_supports_op(nor->spimem, op)) {
- if (nor->mtd.size > SZ_16M)
- return -ENOTSUPP;
-
- /* If flash size <= 16MB, 3 address bytes are sufficient */
- op->addr.nbytes = 3;
- if (!spi_mem_supports_op(nor->spimem, op))
- return -ENOTSUPP;
- }
-
- return 0;
-}
-
-/**
- * spi_nor_spimem_check_readop - check if the read op is supported
- * by controller
- *@nor: pointer to a 'struct spi_nor'
- *@read: pointer to op template to be checked
- *
- * Returns 0 if operation is supported, -ENOTSUPP otherwise.
- */
-static int spi_nor_spimem_check_readop(struct spi_nor *nor,
- const struct spi_nor_read_command *read)
-{
- struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(read->opcode, 1),
- SPI_MEM_OP_ADDR(3, 0, 1),
- SPI_MEM_OP_DUMMY(0, 1),
- SPI_MEM_OP_DATA_IN(0, NULL, 1));
-
- op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(read->proto);
- op.addr.buswidth = spi_nor_get_protocol_addr_nbits(read->proto);
- op.data.buswidth = spi_nor_get_protocol_data_nbits(read->proto);
- op.dummy.buswidth = op.addr.buswidth;
- op.dummy.nbytes = (read->num_mode_clocks + read->num_wait_states) *
- op.dummy.buswidth / 8;
-
- return spi_nor_spimem_check_op(nor, &op);
-}
-
-/**
- * spi_nor_spimem_check_pp - check if the page program op is supported
- * by controller
- *@nor: pointer to a 'struct spi_nor'
- *@pp: pointer to op template to be checked
- *
- * Returns 0 if operation is supported, -ENOTSUPP otherwise.
- */
-static int spi_nor_spimem_check_pp(struct spi_nor *nor,
- const struct spi_nor_pp_command *pp)
-{
- struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(pp->opcode, 1),
- SPI_MEM_OP_ADDR(3, 0, 1),
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_DATA_OUT(0, NULL, 1));
-
- op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(pp->proto);
- op.addr.buswidth = spi_nor_get_protocol_addr_nbits(pp->proto);
- op.data.buswidth = spi_nor_get_protocol_data_nbits(pp->proto);
-
- return spi_nor_spimem_check_op(nor, &op);
-}
-
-/**
- * spi_nor_spimem_adjust_hwcaps - Find optimal Read/Write protocol
- * based on SPI controller capabilities
- * @nor: pointer to a 'struct spi_nor'
- * @hwcaps: pointer to resulting capabilities after adjusting
- * according to controller and flash's capability
- */
-static void
-spi_nor_spimem_adjust_hwcaps(struct spi_nor *nor, u32 *hwcaps)
-{
- struct spi_nor_flash_parameter *params = &nor->params;
- unsigned int cap;
-
- /* DTR modes are not supported yet, mask them all. */
- *hwcaps &= ~SNOR_HWCAPS_DTR;
-
- /* X-X-X modes are not supported yet, mask them all. */
- *hwcaps &= ~SNOR_HWCAPS_X_X_X;
-
- for (cap = 0; cap < sizeof(*hwcaps) * BITS_PER_BYTE; cap++) {
- int rdidx, ppidx;
-
- if (!(*hwcaps & BIT(cap)))
- continue;
-
- rdidx = spi_nor_hwcaps_read2cmd(BIT(cap));
- if (rdidx >= 0 &&
- spi_nor_spimem_check_readop(nor, ¶ms->reads[rdidx]))
- *hwcaps &= ~BIT(cap);
-
- ppidx = spi_nor_hwcaps_pp2cmd(BIT(cap));
- if (ppidx < 0)
- continue;
-
- if (spi_nor_spimem_check_pp(nor,
- ¶ms->page_programs[ppidx]))
- *hwcaps &= ~BIT(cap);
- }
-}
-
-/**
- * spi_nor_read_sfdp_dma_unsafe() - read Serial Flash Discoverable Parameters.
- * @nor: pointer to a 'struct spi_nor'
- * @addr: offset in the SFDP area to start reading data from
- * @len: number of bytes to read
- * @buf: buffer where the SFDP data are copied into
- *
- * Wrap spi_nor_read_sfdp() using a kmalloc'ed bounce buffer as @buf is now not
- * guaranteed to be dma-safe.
- *
- * Return: -ENOMEM if kmalloc() fails, the return code of spi_nor_read_sfdp()
- * otherwise.
- */
-static int spi_nor_read_sfdp_dma_unsafe(struct spi_nor *nor, u32 addr,
- size_t len, void *buf)
-{
- void *dma_safe_buf;
- int ret;
-
- dma_safe_buf = kmalloc(len, GFP_KERNEL);
- if (!dma_safe_buf)
- return -ENOMEM;
-
- ret = spi_nor_read_sfdp(nor, addr, len, dma_safe_buf);
- memcpy(buf, dma_safe_buf, len);
- kfree(dma_safe_buf);
-
- return ret;
-}
-
-/* Fast Read settings. */
-
-static void
-spi_nor_set_read_settings_from_bfpt(struct spi_nor_read_command *read,
- u16 half,
- enum spi_nor_protocol proto)
-{
- read->num_mode_clocks = (half >> 5) & 0x07;
- read->num_wait_states = (half >> 0) & 0x1f;
- read->opcode = (half >> 8) & 0xff;
- read->proto = proto;
-}
-
-struct sfdp_bfpt_read {
- /* The Fast Read x-y-z hardware capability in params->hwcaps.mask. */
- u32 hwcaps;
-
- /*
- * The <supported_bit> bit in <supported_dword> BFPT DWORD tells us
- * whether the Fast Read x-y-z command is supported.
- */
- u32 supported_dword;
- u32 supported_bit;
-
- /*
- * The half-word at offset <setting_shift> in <setting_dword> BFPT DWORD
- * encodes the op code, the number of mode clocks and the number of wait
- * states to be used by Fast Read x-y-z command.
- */
- u32 settings_dword;
- u32 settings_shift;
-
- /* The SPI protocol for this Fast Read x-y-z command. */
- enum spi_nor_protocol proto;
-};
-
-static const struct sfdp_bfpt_read sfdp_bfpt_reads[] = {
- /* Fast Read 1-1-2 */
- {
- SNOR_HWCAPS_READ_1_1_2,
- BFPT_DWORD(1), BIT(16), /* Supported bit */
- BFPT_DWORD(4), 0, /* Settings */
- SNOR_PROTO_1_1_2,
- },
-
- /* Fast Read 1-2-2 */
- {
- SNOR_HWCAPS_READ_1_2_2,
- BFPT_DWORD(1), BIT(20), /* Supported bit */
- BFPT_DWORD(4), 16, /* Settings */
- SNOR_PROTO_1_2_2,
- },
-
- /* Fast Read 2-2-2 */
- {
- SNOR_HWCAPS_READ_2_2_2,
- BFPT_DWORD(5), BIT(0), /* Supported bit */
- BFPT_DWORD(6), 16, /* Settings */
- SNOR_PROTO_2_2_2,
- },
-
- /* Fast Read 1-1-4 */
- {
- SNOR_HWCAPS_READ_1_1_4,
- BFPT_DWORD(1), BIT(22), /* Supported bit */
- BFPT_DWORD(3), 16, /* Settings */
- SNOR_PROTO_1_1_4,
- },
-
- /* Fast Read 1-4-4 */
- {
- SNOR_HWCAPS_READ_1_4_4,
- BFPT_DWORD(1), BIT(21), /* Supported bit */
- BFPT_DWORD(3), 0, /* Settings */
- SNOR_PROTO_1_4_4,
- },
-
- /* Fast Read 4-4-4 */
- {
- SNOR_HWCAPS_READ_4_4_4,
- BFPT_DWORD(5), BIT(4), /* Supported bit */
- BFPT_DWORD(7), 16, /* Settings */
- SNOR_PROTO_4_4_4,
- },
-};
-
-struct sfdp_bfpt_erase {
- /*
- * The half-word at offset <shift> in DWORD <dwoard> encodes the
- * op code and erase sector size to be used by Sector Erase commands.
- */
- u32 dword;
- u32 shift;
-};
-
-static const struct sfdp_bfpt_erase sfdp_bfpt_erases[] = {
- /* Erase Type 1 in DWORD8 bits[15:0] */
- {BFPT_DWORD(8), 0},
-
- /* Erase Type 2 in DWORD8 bits[31:16] */
- {BFPT_DWORD(8), 16},
-
- /* Erase Type 3 in DWORD9 bits[15:0] */
- {BFPT_DWORD(9), 0},
-
- /* Erase Type 4 in DWORD9 bits[31:16] */
- {BFPT_DWORD(9), 16},
-};
-
-/**
- * spi_nor_set_erase_type() - set a SPI NOR erase type
- * @erase: pointer to a structure that describes a SPI NOR erase type
- * @size: the size of the sector/block erased by the erase type
- * @opcode: the SPI command op code to erase the sector/block
- */
-static void spi_nor_set_erase_type(struct spi_nor_erase_type *erase,
- u32 size, u8 opcode)
-{
- erase->size = size;
- erase->opcode = opcode;
- /* JEDEC JESD216B Standard imposes erase sizes to be power of 2. */
- erase->size_shift = ffs(erase->size) - 1;
- erase->size_mask = (1 << erase->size_shift) - 1;
-}
-
-/**
- * spi_nor_set_erase_settings_from_bfpt() - set erase type settings from BFPT
- * @erase: pointer to a structure that describes a SPI NOR erase type
- * @size: the size of the sector/block erased by the erase type
- * @opcode: the SPI command op code to erase the sector/block
- * @i: erase type index as sorted in the Basic Flash Parameter Table
- *
- * The supported Erase Types will be sorted at init in ascending order, with
- * the smallest Erase Type size being the first member in the erase_type array
- * of the spi_nor_erase_map structure. Save the Erase Type index as sorted in
- * the Basic Flash Parameter Table since it will be used later on to
- * synchronize with the supported Erase Types defined in SFDP optional tables.
- */
-static void
-spi_nor_set_erase_settings_from_bfpt(struct spi_nor_erase_type *erase,
- u32 size, u8 opcode, u8 i)
-{
- erase->idx = i;
- spi_nor_set_erase_type(erase, size, opcode);
-}
-
-/**
- * spi_nor_map_cmp_erase_type() - compare the map's erase types by size
- * @l: member in the left half of the map's erase_type array
- * @r: member in the right half of the map's erase_type array
- *
- * Comparison function used in the sort() call to sort in ascending order the
- * map's erase types, the smallest erase type size being the first member in the
- * sorted erase_type array.
- *
- * Return: the result of @l->size - @r->size
- */
-static int spi_nor_map_cmp_erase_type(const void *l, const void *r)
-{
- const struct spi_nor_erase_type *left = l, *right = r;
-
- return left->size - right->size;
-}
-
-/**
- * spi_nor_sort_erase_mask() - sort erase mask
- * @map: the erase map of the SPI NOR
- * @erase_mask: the erase type mask to be sorted
- *
- * Replicate the sort done for the map's erase types in BFPT: sort the erase
- * mask in ascending order with the smallest erase type size starting from
- * BIT(0) in the sorted erase mask.
- *
- * Return: sorted erase mask.
- */
-static u8 spi_nor_sort_erase_mask(struct spi_nor_erase_map *map, u8 erase_mask)
-{
- struct spi_nor_erase_type *erase_type = map->erase_type;
- int i;
- u8 sorted_erase_mask = 0;
-
- if (!erase_mask)
- return 0;
-
- /* Replicate the sort done for the map's erase types. */
- for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++)
- if (erase_type[i].size && erase_mask & BIT(erase_type[i].idx))
- sorted_erase_mask |= BIT(i);
-
- return sorted_erase_mask;
-}
-
-/**
- * spi_nor_regions_sort_erase_types() - sort erase types in each region
- * @map: the erase map of the SPI NOR
- *
- * Function assumes that the erase types defined in the erase map are already
- * sorted in ascending order, with the smallest erase type size being the first
- * member in the erase_type array. It replicates the sort done for the map's
- * erase types. Each region's erase bitmask will indicate which erase types are
- * supported from the sorted erase types defined in the erase map.
- * Sort the all region's erase type at init in order to speed up the process of
- * finding the best erase command at runtime.
- */
-static void spi_nor_regions_sort_erase_types(struct spi_nor_erase_map *map)
-{
- struct spi_nor_erase_region *region = map->regions;
- u8 region_erase_mask, sorted_erase_mask;
-
- while (region) {
- region_erase_mask = region->offset & SNOR_ERASE_TYPE_MASK;
-
- sorted_erase_mask = spi_nor_sort_erase_mask(map,
- region_erase_mask);
-
- /* Overwrite erase mask. */
- region->offset = (region->offset & ~SNOR_ERASE_TYPE_MASK) |
- sorted_erase_mask;
-
- region = spi_nor_region_next(region);
- }
-}
-
-/**
- * spi_nor_init_uniform_erase_map() - Initialize uniform erase map
- * @map: the erase map of the SPI NOR
- * @erase_mask: bitmask encoding erase types that can erase the entire
- * flash memory
- * @flash_size: the spi nor flash memory size
- */
-static void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map,
- u8 erase_mask, u64 flash_size)
-{
- /* Offset 0 with erase_mask and SNOR_LAST_REGION bit set */
- map->uniform_region.offset = (erase_mask & SNOR_ERASE_TYPE_MASK) |
- SNOR_LAST_REGION;
- map->uniform_region.size = flash_size;
- map->regions = &map->uniform_region;
- map->uniform_erase_type = erase_mask;
-}
-
-static int
-spi_nor_post_bfpt_fixups(struct spi_nor *nor,
- const struct sfdp_parameter_header *bfpt_header,
- const struct sfdp_bfpt *bfpt,
- struct spi_nor_flash_parameter *params)
-{
- if (nor->info->fixups && nor->info->fixups->post_bfpt)
- return nor->info->fixups->post_bfpt(nor, bfpt_header, bfpt,
- params);
-
- return 0;
-}
-
-/**
- * spi_nor_parse_bfpt() - read and parse the Basic Flash Parameter Table.
- * @nor: pointer to a 'struct spi_nor'
- * @bfpt_header: pointer to the 'struct sfdp_parameter_header' describing
- * the Basic Flash Parameter Table length and version
- * @params: pointer to the 'struct spi_nor_flash_parameter' to be
- * filled
- *
- * The Basic Flash Parameter Table is the main and only mandatory table as
- * defined by the SFDP (JESD216) specification.
- * It provides us with the total size (memory density) of the data array and
- * the number of address bytes for Fast Read, Page Program and Sector Erase
- * commands.
- * For Fast READ commands, it also gives the number of mode clock cycles and
- * wait states (regrouped in the number of dummy clock cycles) for each
- * supported instruction op code.
- * For Page Program, the page size is now available since JESD216 rev A, however
- * the supported instruction op codes are still not provided.
- * For Sector Erase commands, this table stores the supported instruction op
- * codes and the associated sector sizes.
- * Finally, the Quad Enable Requirements (QER) are also available since JESD216
- * rev A. The QER bits encode the manufacturer dependent procedure to be
- * executed to set the Quad Enable (QE) bit in some internal register of the
- * Quad SPI memory. Indeed the QE bit, when it exists, must be set before
- * sending any Quad SPI command to the memory. Actually, setting the QE bit
- * tells the memory to reassign its WP# and HOLD#/RESET# pins to functions IO2
- * and IO3 hence enabling 4 (Quad) I/O lines.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_parse_bfpt(struct spi_nor *nor,
- const struct sfdp_parameter_header *bfpt_header,
- struct spi_nor_flash_parameter *params)
-{
- struct spi_nor_erase_map *map = ¶ms->erase_map;
- struct spi_nor_erase_type *erase_type = map->erase_type;
- struct sfdp_bfpt bfpt;
- size_t len;
- int i, cmd, err;
- u32 addr;
- u16 half;
- u8 erase_mask;
-
- /* JESD216 Basic Flash Parameter Table length is at least 9 DWORDs. */
- if (bfpt_header->length < BFPT_DWORD_MAX_JESD216)
- return -EINVAL;
-
- /* Read the Basic Flash Parameter Table. */
- len = min_t(size_t, sizeof(bfpt),
- bfpt_header->length * sizeof(u32));
- addr = SFDP_PARAM_HEADER_PTP(bfpt_header);
- memset(&bfpt, 0, sizeof(bfpt));
- err = spi_nor_read_sfdp_dma_unsafe(nor, addr, len, &bfpt);
- if (err < 0)
- return err;
-
- /* Fix endianness of the BFPT DWORDs. */
- for (i = 0; i < BFPT_DWORD_MAX; i++)
- bfpt.dwords[i] = le32_to_cpu(bfpt.dwords[i]);
-
- /* Number of address bytes. */
- switch (bfpt.dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) {
- case BFPT_DWORD1_ADDRESS_BYTES_3_ONLY:
- nor->addr_width = 3;
- break;
-
- case BFPT_DWORD1_ADDRESS_BYTES_4_ONLY:
- nor->addr_width = 4;
- break;
-
- default:
- break;
- }
-
- /* Flash Memory Density (in bits). */
- params->size = bfpt.dwords[BFPT_DWORD(2)];
- if (params->size & BIT(31)) {
- params->size &= ~BIT(31);
-
- /*
- * Prevent overflows on params->size. Anyway, a NOR of 2^64
- * bits is unlikely to exist so this error probably means
- * the BFPT we are reading is corrupted/wrong.
- */
- if (params->size > 63)
- return -EINVAL;
-
- params->size = 1ULL << params->size;
- } else {
- params->size++;
- }
- params->size >>= 3; /* Convert to bytes. */
-
- /* Fast Read settings. */
- for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_reads); i++) {
- const struct sfdp_bfpt_read *rd = &sfdp_bfpt_reads[i];
- struct spi_nor_read_command *read;
-
- if (!(bfpt.dwords[rd->supported_dword] & rd->supported_bit)) {
- params->hwcaps.mask &= ~rd->hwcaps;
- continue;
- }
-
- params->hwcaps.mask |= rd->hwcaps;
- cmd = spi_nor_hwcaps_read2cmd(rd->hwcaps);
- read = ¶ms->reads[cmd];
- half = bfpt.dwords[rd->settings_dword] >> rd->settings_shift;
- spi_nor_set_read_settings_from_bfpt(read, half, rd->proto);
- }
-
- /*
- * Sector Erase settings. Reinitialize the uniform erase map using the
- * Erase Types defined in the bfpt table.
- */
- erase_mask = 0;
- memset(¶ms->erase_map, 0, sizeof(params->erase_map));
- for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_erases); i++) {
- const struct sfdp_bfpt_erase *er = &sfdp_bfpt_erases[i];
- u32 erasesize;
- u8 opcode;
-
- half = bfpt.dwords[er->dword] >> er->shift;
- erasesize = half & 0xff;
-
- /* erasesize == 0 means this Erase Type is not supported. */
- if (!erasesize)
- continue;
-
- erasesize = 1U << erasesize;
- opcode = (half >> 8) & 0xff;
- erase_mask |= BIT(i);
- spi_nor_set_erase_settings_from_bfpt(&erase_type[i], erasesize,
- opcode, i);
- }
- spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
- /*
- * Sort all the map's Erase Types in ascending order with the smallest
- * erase size being the first member in the erase_type array.
- */
- sort(erase_type, SNOR_ERASE_TYPE_MAX, sizeof(erase_type[0]),
- spi_nor_map_cmp_erase_type, NULL);
- /*
- * Sort the erase types in the uniform region in order to update the
- * uniform_erase_type bitmask. The bitmask will be used later on when
- * selecting the uniform erase.
- */
- spi_nor_regions_sort_erase_types(map);
- map->uniform_erase_type = map->uniform_region.offset &
- SNOR_ERASE_TYPE_MASK;
-
- /* Stop here if not JESD216 rev A or later. */
- if (bfpt_header->length < BFPT_DWORD_MAX)
- return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt,
- params);
-
- /* Page size: this field specifies 'N' so the page size = 2^N bytes. */
- params->page_size = bfpt.dwords[BFPT_DWORD(11)];
- params->page_size &= BFPT_DWORD11_PAGE_SIZE_MASK;
- params->page_size >>= BFPT_DWORD11_PAGE_SIZE_SHIFT;
- params->page_size = 1U << params->page_size;
-
- /* Quad Enable Requirements. */
- switch (bfpt.dwords[BFPT_DWORD(15)] & BFPT_DWORD15_QER_MASK) {
- case BFPT_DWORD15_QER_NONE:
- params->quad_enable = NULL;
- break;
-
- case BFPT_DWORD15_QER_SR2_BIT1_BUGGY:
- /*
- * Writing only one byte to the Status Register has the
- * side-effect of clearing Status Register 2.
- */
- case BFPT_DWORD15_QER_SR2_BIT1_NO_RD:
- /*
- * Read Configuration Register (35h) instruction is not
- * supported.
- */
- nor->flags |= SNOR_F_HAS_16BIT_SR | SNOR_F_NO_READ_CR;
- params->quad_enable = spi_nor_sr2_bit1_quad_enable;
- break;
-
- case BFPT_DWORD15_QER_SR1_BIT6:
- nor->flags &= ~SNOR_F_HAS_16BIT_SR;
- params->quad_enable = spi_nor_sr1_bit6_quad_enable;
- break;
-
- case BFPT_DWORD15_QER_SR2_BIT7:
- nor->flags &= ~SNOR_F_HAS_16BIT_SR;
- params->quad_enable = spi_nor_sr2_bit7_quad_enable;
- break;
-
- case BFPT_DWORD15_QER_SR2_BIT1:
- /*
- * JESD216 rev B or later does not specify if writing only one
- * byte to the Status Register clears or not the Status
- * Register 2, so let's be cautious and keep the default
- * assumption of a 16-bit Write Status (01h) command.
- */
- nor->flags |= SNOR_F_HAS_16BIT_SR;
-
- params->quad_enable = spi_nor_sr2_bit1_quad_enable;
- break;
-
- default:
- return -EINVAL;
- }
-
- return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, params);
-}
-
-#define SMPT_CMD_ADDRESS_LEN_MASK GENMASK(23, 22)
-#define SMPT_CMD_ADDRESS_LEN_0 (0x0UL << 22)
-#define SMPT_CMD_ADDRESS_LEN_3 (0x1UL << 22)
-#define SMPT_CMD_ADDRESS_LEN_4 (0x2UL << 22)
-#define SMPT_CMD_ADDRESS_LEN_USE_CURRENT (0x3UL << 22)
-
-#define SMPT_CMD_READ_DUMMY_MASK GENMASK(19, 16)
-#define SMPT_CMD_READ_DUMMY_SHIFT 16
-#define SMPT_CMD_READ_DUMMY(_cmd) \
- (((_cmd) & SMPT_CMD_READ_DUMMY_MASK) >> SMPT_CMD_READ_DUMMY_SHIFT)
-#define SMPT_CMD_READ_DUMMY_IS_VARIABLE 0xfUL
-
-#define SMPT_CMD_READ_DATA_MASK GENMASK(31, 24)
-#define SMPT_CMD_READ_DATA_SHIFT 24
-#define SMPT_CMD_READ_DATA(_cmd) \
- (((_cmd) & SMPT_CMD_READ_DATA_MASK) >> SMPT_CMD_READ_DATA_SHIFT)
-
-#define SMPT_CMD_OPCODE_MASK GENMASK(15, 8)
-#define SMPT_CMD_OPCODE_SHIFT 8
-#define SMPT_CMD_OPCODE(_cmd) \
- (((_cmd) & SMPT_CMD_OPCODE_MASK) >> SMPT_CMD_OPCODE_SHIFT)
-
-#define SMPT_MAP_REGION_COUNT_MASK GENMASK(23, 16)
-#define SMPT_MAP_REGION_COUNT_SHIFT 16
-#define SMPT_MAP_REGION_COUNT(_header) \
- ((((_header) & SMPT_MAP_REGION_COUNT_MASK) >> \
- SMPT_MAP_REGION_COUNT_SHIFT) + 1)
-
-#define SMPT_MAP_ID_MASK GENMASK(15, 8)
-#define SMPT_MAP_ID_SHIFT 8
-#define SMPT_MAP_ID(_header) \
- (((_header) & SMPT_MAP_ID_MASK) >> SMPT_MAP_ID_SHIFT)
-
-#define SMPT_MAP_REGION_SIZE_MASK GENMASK(31, 8)
-#define SMPT_MAP_REGION_SIZE_SHIFT 8
-#define SMPT_MAP_REGION_SIZE(_region) \
- (((((_region) & SMPT_MAP_REGION_SIZE_MASK) >> \
- SMPT_MAP_REGION_SIZE_SHIFT) + 1) * 256)
-
-#define SMPT_MAP_REGION_ERASE_TYPE_MASK GENMASK(3, 0)
-#define SMPT_MAP_REGION_ERASE_TYPE(_region) \
- ((_region) & SMPT_MAP_REGION_ERASE_TYPE_MASK)
-
-#define SMPT_DESC_TYPE_MAP BIT(1)
-#define SMPT_DESC_END BIT(0)
-
-/**
- * spi_nor_smpt_addr_width() - return the address width used in the
- * configuration detection command.
- * @nor: pointer to a 'struct spi_nor'
- * @settings: configuration detection command descriptor, dword1
- */
-static u8 spi_nor_smpt_addr_width(const struct spi_nor *nor, const u32 settings)
-{
- switch (settings & SMPT_CMD_ADDRESS_LEN_MASK) {
- case SMPT_CMD_ADDRESS_LEN_0:
- return 0;
- case SMPT_CMD_ADDRESS_LEN_3:
- return 3;
- case SMPT_CMD_ADDRESS_LEN_4:
- return 4;
- case SMPT_CMD_ADDRESS_LEN_USE_CURRENT:
- /* fall through */
- default:
- return nor->addr_width;
- }
-}
-
-/**
- * spi_nor_smpt_read_dummy() - return the configuration detection command read
- * latency, in clock cycles.
- * @nor: pointer to a 'struct spi_nor'
- * @settings: configuration detection command descriptor, dword1
- *
- * Return: the number of dummy cycles for an SMPT read
- */
-static u8 spi_nor_smpt_read_dummy(const struct spi_nor *nor, const u32 settings)
-{
- u8 read_dummy = SMPT_CMD_READ_DUMMY(settings);
-
- if (read_dummy == SMPT_CMD_READ_DUMMY_IS_VARIABLE)
- return nor->read_dummy;
- return read_dummy;
-}
-
-/**
- * spi_nor_get_map_in_use() - get the configuration map in use
- * @nor: pointer to a 'struct spi_nor'
- * @smpt: pointer to the sector map parameter table
- * @smpt_len: sector map parameter table length
- *
- * Return: pointer to the map in use, ERR_PTR(-errno) otherwise.
- */
-static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
- u8 smpt_len)
-{
- const u32 *ret;
- u8 *buf;
- u32 addr;
- int err;
- u8 i;
- u8 addr_width, read_opcode, read_dummy;
- u8 read_data_mask, map_id;
-
- /* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */
- buf = kmalloc(sizeof(*buf), GFP_KERNEL);
- if (!buf)
- return ERR_PTR(-ENOMEM);
-
- addr_width = nor->addr_width;
- read_dummy = nor->read_dummy;
- read_opcode = nor->read_opcode;
-
- map_id = 0;
- /* Determine if there are any optional Detection Command Descriptors */
- for (i = 0; i < smpt_len; i += 2) {
- if (smpt[i] & SMPT_DESC_TYPE_MAP)
- break;
-
- read_data_mask = SMPT_CMD_READ_DATA(smpt[i]);
- nor->addr_width = spi_nor_smpt_addr_width(nor, smpt[i]);
- nor->read_dummy = spi_nor_smpt_read_dummy(nor, smpt[i]);
- nor->read_opcode = SMPT_CMD_OPCODE(smpt[i]);
- addr = smpt[i + 1];
-
- err = spi_nor_read_raw(nor, addr, 1, buf);
- if (err) {
- ret = ERR_PTR(err);
- goto out;
- }
-
- /*
- * Build an index value that is used to select the Sector Map
- * Configuration that is currently in use.
- */
- map_id = map_id << 1 | !!(*buf & read_data_mask);
- }
-
- /*
- * If command descriptors are provided, they always precede map
- * descriptors in the table. There is no need to start the iteration
- * over smpt array all over again.
- *
- * Find the matching configuration map.
- */
- ret = ERR_PTR(-EINVAL);
- while (i < smpt_len) {
- if (SMPT_MAP_ID(smpt[i]) == map_id) {
- ret = smpt + i;
- break;
- }
-
- /*
- * If there are no more configuration map descriptors and no
- * configuration ID matched the configuration identifier, the
- * sector address map is unknown.
- */
- if (smpt[i] & SMPT_DESC_END)
- break;
-
- /* increment the table index to the next map */
- i += SMPT_MAP_REGION_COUNT(smpt[i]) + 1;
- }
-
- /* fall through */
-out:
- kfree(buf);
- nor->addr_width = addr_width;
- nor->read_dummy = read_dummy;
- nor->read_opcode = read_opcode;
- return ret;
-}
-
-/**
- * spi_nor_region_check_overlay() - set overlay bit when the region is overlaid
- * @region: pointer to a structure that describes a SPI NOR erase region
- * @erase: pointer to a structure that describes a SPI NOR erase type
- * @erase_type: erase type bitmask
- */
-static void
-spi_nor_region_check_overlay(struct spi_nor_erase_region *region,
- const struct spi_nor_erase_type *erase,
- const u8 erase_type)
-{
- int i;
-
- for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
- if (!(erase_type & BIT(i)))
- continue;
- if (region->size & erase[i].size_mask) {
- spi_nor_region_mark_overlay(region);
- return;
- }
- }
-}
-
-/**
- * spi_nor_init_non_uniform_erase_map() - initialize the non-uniform erase map
- * @nor: pointer to a 'struct spi_nor'
- * @params: pointer to a duplicate 'struct spi_nor_flash_parameter' that is
- * used for storing SFDP parsed data
- * @smpt: pointer to the sector map parameter table
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int
-spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
- struct spi_nor_flash_parameter *params,
- const u32 *smpt)
-{
- struct spi_nor_erase_map *map = ¶ms->erase_map;
- struct spi_nor_erase_type *erase = map->erase_type;
- struct spi_nor_erase_region *region;
- u64 offset;
- u32 region_count;
- int i, j;
- u8 uniform_erase_type, save_uniform_erase_type;
- u8 erase_type, regions_erase_type;
-
- region_count = SMPT_MAP_REGION_COUNT(*smpt);
- /*
- * The regions will be freed when the driver detaches from the
- * device.
- */
- region = devm_kcalloc(nor->dev, region_count, sizeof(*region),
- GFP_KERNEL);
- if (!region)
- return -ENOMEM;
- map->regions = region;
-
- uniform_erase_type = 0xff;
- regions_erase_type = 0;
- offset = 0;
- /* Populate regions. */
- for (i = 0; i < region_count; i++) {
- j = i + 1; /* index for the region dword */
- region[i].size = SMPT_MAP_REGION_SIZE(smpt[j]);
- erase_type = SMPT_MAP_REGION_ERASE_TYPE(smpt[j]);
- region[i].offset = offset | erase_type;
-
- spi_nor_region_check_overlay(®ion[i], erase, erase_type);
-
- /*
- * Save the erase types that are supported in all regions and
- * can erase the entire flash memory.
- */
- uniform_erase_type &= erase_type;
-
- /*
- * regions_erase_type mask will indicate all the erase types
- * supported in this configuration map.
- */
- regions_erase_type |= erase_type;
-
- offset = (region[i].offset & ~SNOR_ERASE_FLAGS_MASK) +
- region[i].size;
- }
-
- save_uniform_erase_type = map->uniform_erase_type;
- map->uniform_erase_type = spi_nor_sort_erase_mask(map,
- uniform_erase_type);
-
- if (!regions_erase_type) {
- /*
- * Roll back to the previous uniform_erase_type mask, SMPT is
- * broken.
- */
- map->uniform_erase_type = save_uniform_erase_type;
- return -EINVAL;
- }
-
- /*
- * BFPT advertises all the erase types supported by all the possible
- * map configurations. Mask out the erase types that are not supported
- * by the current map configuration.
- */
- for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++)
- if (!(regions_erase_type & BIT(erase[i].idx)))
- spi_nor_set_erase_type(&erase[i], 0, 0xFF);
-
- spi_nor_region_mark_end(®ion[i - 1]);
-
- return 0;
-}
-
-/**
- * spi_nor_parse_smpt() - parse Sector Map Parameter Table
- * @nor: pointer to a 'struct spi_nor'
- * @smpt_header: sector map parameter table header
- * @params: pointer to a duplicate 'struct spi_nor_flash_parameter'
- * that is used for storing SFDP parsed data
- *
- * This table is optional, but when available, we parse it to identify the
- * location and size of sectors within the main data array of the flash memory
- * device and to identify which Erase Types are supported by each sector.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_parse_smpt(struct spi_nor *nor,
- const struct sfdp_parameter_header *smpt_header,
- struct spi_nor_flash_parameter *params)
-{
- const u32 *sector_map;
- u32 *smpt;
- size_t len;
- u32 addr;
- int i, ret;
-
- /* Read the Sector Map Parameter Table. */
- len = smpt_header->length * sizeof(*smpt);
- smpt = kmalloc(len, GFP_KERNEL);
- if (!smpt)
- return -ENOMEM;
-
- addr = SFDP_PARAM_HEADER_PTP(smpt_header);
- ret = spi_nor_read_sfdp(nor, addr, len, smpt);
- if (ret)
- goto out;
-
- /* Fix endianness of the SMPT DWORDs. */
- for (i = 0; i < smpt_header->length; i++)
- smpt[i] = le32_to_cpu(smpt[i]);
-
- sector_map = spi_nor_get_map_in_use(nor, smpt, smpt_header->length);
- if (IS_ERR(sector_map)) {
- ret = PTR_ERR(sector_map);
- goto out;
- }
-
- ret = spi_nor_init_non_uniform_erase_map(nor, params, sector_map);
- if (ret)
- goto out;
-
- spi_nor_regions_sort_erase_types(¶ms->erase_map);
- /* fall through */
-out:
- kfree(smpt);
- return ret;
-}
-
-#define SFDP_4BAIT_DWORD_MAX 2
-
-struct sfdp_4bait {
- /* The hardware capability. */
- u32 hwcaps;
-
- /*
- * The <supported_bit> bit in DWORD1 of the 4BAIT tells us whether
- * the associated 4-byte address op code is supported.
- */
- u32 supported_bit;
-};
-
-/**
- * spi_nor_parse_4bait() - parse the 4-Byte Address Instruction Table
- * @nor: pointer to a 'struct spi_nor'.
- * @param_header: pointer to the 'struct sfdp_parameter_header' describing
- * the 4-Byte Address Instruction Table length and version.
- * @params: pointer to the 'struct spi_nor_flash_parameter' to be.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_parse_4bait(struct spi_nor *nor,
- const struct sfdp_parameter_header *param_header,
- struct spi_nor_flash_parameter *params)
-{
- static const struct sfdp_4bait reads[] = {
- { SNOR_HWCAPS_READ, BIT(0) },
- { SNOR_HWCAPS_READ_FAST, BIT(1) },
- { SNOR_HWCAPS_READ_1_1_2, BIT(2) },
- { SNOR_HWCAPS_READ_1_2_2, BIT(3) },
- { SNOR_HWCAPS_READ_1_1_4, BIT(4) },
- { SNOR_HWCAPS_READ_1_4_4, BIT(5) },
- { SNOR_HWCAPS_READ_1_1_1_DTR, BIT(13) },
- { SNOR_HWCAPS_READ_1_2_2_DTR, BIT(14) },
- { SNOR_HWCAPS_READ_1_4_4_DTR, BIT(15) },
- };
- static const struct sfdp_4bait programs[] = {
- { SNOR_HWCAPS_PP, BIT(6) },
- { SNOR_HWCAPS_PP_1_1_4, BIT(7) },
- { SNOR_HWCAPS_PP_1_4_4, BIT(8) },
- };
- static const struct sfdp_4bait erases[SNOR_ERASE_TYPE_MAX] = {
- { 0u /* not used */, BIT(9) },
- { 0u /* not used */, BIT(10) },
- { 0u /* not used */, BIT(11) },
- { 0u /* not used */, BIT(12) },
- };
- struct spi_nor_pp_command *params_pp = params->page_programs;
- struct spi_nor_erase_map *map = ¶ms->erase_map;
- struct spi_nor_erase_type *erase_type = map->erase_type;
- u32 *dwords;
- size_t len;
- u32 addr, discard_hwcaps, read_hwcaps, pp_hwcaps, erase_mask;
- int i, ret;
-
- if (param_header->major != SFDP_JESD216_MAJOR ||
- param_header->length < SFDP_4BAIT_DWORD_MAX)
- return -EINVAL;
-
- /* Read the 4-byte Address Instruction Table. */
- len = sizeof(*dwords) * SFDP_4BAIT_DWORD_MAX;
-
- /* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */
- dwords = kmalloc(len, GFP_KERNEL);
- if (!dwords)
- return -ENOMEM;
-
- addr = SFDP_PARAM_HEADER_PTP(param_header);
- ret = spi_nor_read_sfdp(nor, addr, len, dwords);
- if (ret)
- goto out;
-
- /* Fix endianness of the 4BAIT DWORDs. */
- for (i = 0; i < SFDP_4BAIT_DWORD_MAX; i++)
- dwords[i] = le32_to_cpu(dwords[i]);
-
- /*
- * Compute the subset of (Fast) Read commands for which the 4-byte
- * version is supported.
- */
- discard_hwcaps = 0;
- read_hwcaps = 0;
- for (i = 0; i < ARRAY_SIZE(reads); i++) {
- const struct sfdp_4bait *read = &reads[i];
-
- discard_hwcaps |= read->hwcaps;
- if ((params->hwcaps.mask & read->hwcaps) &&
- (dwords[0] & read->supported_bit))
- read_hwcaps |= read->hwcaps;
- }
-
- /*
- * Compute the subset of Page Program commands for which the 4-byte
- * version is supported.
- */
- pp_hwcaps = 0;
- for (i = 0; i < ARRAY_SIZE(programs); i++) {
- const struct sfdp_4bait *program = &programs[i];
-
- /*
- * The 4 Byte Address Instruction (Optional) Table is the only
- * SFDP table that indicates support for Page Program Commands.
- * Bypass the params->hwcaps.mask and consider 4BAIT the biggest
- * authority for specifying Page Program support.
- */
- discard_hwcaps |= program->hwcaps;
- if (dwords[0] & program->supported_bit)
- pp_hwcaps |= program->hwcaps;
- }
-
- /*
- * Compute the subset of Sector Erase commands for which the 4-byte
- * version is supported.
- */
- erase_mask = 0;
- for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
- const struct sfdp_4bait *erase = &erases[i];
-
- if (dwords[0] & erase->supported_bit)
- erase_mask |= BIT(i);
- }
-
- /* Replicate the sort done for the map's erase types in BFPT. */
- erase_mask = spi_nor_sort_erase_mask(map, erase_mask);
-
- /*
- * We need at least one 4-byte op code per read, program and erase
- * operation; the .read(), .write() and .erase() hooks share the
- * nor->addr_width value.
- */
- if (!read_hwcaps || !pp_hwcaps || !erase_mask)
- goto out;
-
- /*
- * Discard all operations from the 4-byte instruction set which are
- * not supported by this memory.
- */
- params->hwcaps.mask &= ~discard_hwcaps;
- params->hwcaps.mask |= (read_hwcaps | pp_hwcaps);
-
- /* Use the 4-byte address instruction set. */
- for (i = 0; i < SNOR_CMD_READ_MAX; i++) {
- struct spi_nor_read_command *read_cmd = ¶ms->reads[i];
-
- read_cmd->opcode = spi_nor_convert_3to4_read(read_cmd->opcode);
- }
-
- /* 4BAIT is the only SFDP table that indicates page program support. */
- if (pp_hwcaps & SNOR_HWCAPS_PP)
- spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP],
- SPINOR_OP_PP_4B, SNOR_PROTO_1_1_1);
- if (pp_hwcaps & SNOR_HWCAPS_PP_1_1_4)
- spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP_1_1_4],
- SPINOR_OP_PP_1_1_4_4B,
- SNOR_PROTO_1_1_4);
- if (pp_hwcaps & SNOR_HWCAPS_PP_1_4_4)
- spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP_1_4_4],
- SPINOR_OP_PP_1_4_4_4B,
- SNOR_PROTO_1_4_4);
-
- for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
- if (erase_mask & BIT(i))
- erase_type[i].opcode = (dwords[1] >>
- erase_type[i].idx * 8) & 0xFF;
- else
- spi_nor_set_erase_type(&erase_type[i], 0u, 0xFF);
- }
-
- /*
- * We set SNOR_F_HAS_4BAIT in order to skip spi_nor_set_4byte_opcodes()
- * later because we already did the conversion to 4byte opcodes. Also,
- * this latest function implements a legacy quirk for the erase size of
- * Spansion memory. However this quirk is no longer needed with new
- * SFDP compliant memories.
- */
- nor->addr_width = 4;
- nor->flags |= SNOR_F_4B_OPCODES | SNOR_F_HAS_4BAIT;
-
- /* fall through */
-out:
- kfree(dwords);
- return ret;
-}
-
-/**
- * spi_nor_parse_sfdp() - parse the Serial Flash Discoverable Parameters.
- * @nor: pointer to a 'struct spi_nor'
- * @params: pointer to the 'struct spi_nor_flash_parameter' to be
- * filled
- *
- * The Serial Flash Discoverable Parameters are described by the JEDEC JESD216
- * specification. This is a standard which tends to supported by almost all
- * (Q)SPI memory manufacturers. Those hard-coded tables allow us to learn at
- * runtime the main parameters needed to perform basic SPI flash operations such
- * as Fast Read, Page Program or Sector Erase commands.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_parse_sfdp(struct spi_nor *nor,
- struct spi_nor_flash_parameter *params)
-{
- const struct sfdp_parameter_header *param_header, *bfpt_header;
- struct sfdp_parameter_header *param_headers = NULL;
- struct sfdp_header header;
- struct device *dev = nor->dev;
- size_t psize;
- int i, err;
-
- /* Get the SFDP header. */
- err = spi_nor_read_sfdp_dma_unsafe(nor, 0, sizeof(header), &header);
- if (err < 0)
- return err;
-
- /* Check the SFDP header version. */
- if (le32_to_cpu(header.signature) != SFDP_SIGNATURE ||
- header.major != SFDP_JESD216_MAJOR)
- return -EINVAL;
-
- /*
- * Verify that the first and only mandatory parameter header is a
- * Basic Flash Parameter Table header as specified in JESD216.
- */
- bfpt_header = &header.bfpt_header;
- if (SFDP_PARAM_HEADER_ID(bfpt_header) != SFDP_BFPT_ID ||
- bfpt_header->major != SFDP_JESD216_MAJOR)
- return -EINVAL;
-
- /*
- * Allocate memory then read all parameter headers with a single
- * Read SFDP command. These parameter headers will actually be parsed
- * twice: a first time to get the latest revision of the basic flash
- * parameter table, then a second time to handle the supported optional
- * tables.
- * Hence we read the parameter headers once for all to reduce the
- * processing time. Also we use kmalloc() instead of devm_kmalloc()
- * because we don't need to keep these parameter headers: the allocated
- * memory is always released with kfree() before exiting this function.
- */
- if (header.nph) {
- psize = header.nph * sizeof(*param_headers);
-
- param_headers = kmalloc(psize, GFP_KERNEL);
- if (!param_headers)
- return -ENOMEM;
-
- err = spi_nor_read_sfdp(nor, sizeof(header),
- psize, param_headers);
- if (err < 0) {
- dev_dbg(dev, "failed to read SFDP parameter headers\n");
- goto exit;
- }
- }
-
- /*
- * Check other parameter headers to get the latest revision of
- * the basic flash parameter table.
- */
- for (i = 0; i < header.nph; i++) {
- param_header = ¶m_headers[i];
-
- if (SFDP_PARAM_HEADER_ID(param_header) == SFDP_BFPT_ID &&
- param_header->major == SFDP_JESD216_MAJOR &&
- (param_header->minor > bfpt_header->minor ||
- (param_header->minor == bfpt_header->minor &&
- param_header->length > bfpt_header->length)))
- bfpt_header = param_header;
- }
-
- err = spi_nor_parse_bfpt(nor, bfpt_header, params);
- if (err)
- goto exit;
-
- /* Parse optional parameter tables. */
- for (i = 0; i < header.nph; i++) {
- param_header = ¶m_headers[i];
-
- switch (SFDP_PARAM_HEADER_ID(param_header)) {
- case SFDP_SECTOR_MAP_ID:
- err = spi_nor_parse_smpt(nor, param_header, params);
- break;
-
- case SFDP_4BAIT_ID:
- err = spi_nor_parse_4bait(nor, param_header, params);
- break;
-
- default:
- break;
- }
-
- if (err) {
- dev_warn(dev, "Failed to parse optional parameter table: %04x\n",
- SFDP_PARAM_HEADER_ID(param_header));
- /*
- * Let's not drop all information we extracted so far
- * if optional table parsers fail. In case of failing,
- * each optional parser is responsible to roll back to
- * the previously known spi_nor data.
- */
- err = 0;
- }
- }
-
-exit:
- kfree(param_headers);
- return err;
-}
-
-static int spi_nor_select_read(struct spi_nor *nor,
- u32 shared_hwcaps)
-{
- int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_READ_MASK) - 1;
- const struct spi_nor_read_command *read;
-
- if (best_match < 0)
- return -EINVAL;
-
- cmd = spi_nor_hwcaps_read2cmd(BIT(best_match));
- if (cmd < 0)
- return -EINVAL;
-
- read = &nor->params.reads[cmd];
- nor->read_opcode = read->opcode;
- nor->read_proto = read->proto;
-
- /*
- * In the spi-nor framework, we don't need to make the difference
- * between mode clock cycles and wait state clock cycles.
- * Indeed, the value of the mode clock cycles is used by a QSPI
- * flash memory to know whether it should enter or leave its 0-4-4
- * (Continuous Read / XIP) mode.
- * eXecution In Place is out of the scope of the mtd sub-system.
- * Hence we choose to merge both mode and wait state clock cycles
- * into the so called dummy clock cycles.
- */
- nor->read_dummy = read->num_mode_clocks + read->num_wait_states;
- return 0;
-}
-
-static int spi_nor_select_pp(struct spi_nor *nor,
- u32 shared_hwcaps)
-{
- int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_PP_MASK) - 1;
- const struct spi_nor_pp_command *pp;
-
- if (best_match < 0)
- return -EINVAL;
-
- cmd = spi_nor_hwcaps_pp2cmd(BIT(best_match));
- if (cmd < 0)
- return -EINVAL;
-
- pp = &nor->params.page_programs[cmd];
- nor->program_opcode = pp->opcode;
- nor->write_proto = pp->proto;
- return 0;
-}
-
-/**
- * spi_nor_select_uniform_erase() - select optimum uniform erase type
- * @map: the erase map of the SPI NOR
- * @wanted_size: the erase type size to search for. Contains the value of
- * info->sector_size or of the "small sector" size in case
- * CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is defined.
- *
- * Once the optimum uniform sector erase command is found, disable all the
- * other.
- *
- * Return: pointer to erase type on success, NULL otherwise.
- */
-static const struct spi_nor_erase_type *
-spi_nor_select_uniform_erase(struct spi_nor_erase_map *map,
- const u32 wanted_size)
-{
- const struct spi_nor_erase_type *tested_erase, *erase = NULL;
- int i;
- u8 uniform_erase_type = map->uniform_erase_type;
-
- for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
- if (!(uniform_erase_type & BIT(i)))
- continue;
-
- tested_erase = &map->erase_type[i];
-
- /*
- * If the current erase size is the one, stop here:
- * we have found the right uniform Sector Erase command.
- */
- if (tested_erase->size == wanted_size) {
- erase = tested_erase;
- break;
- }
-
- /*
- * Otherwise, the current erase size is still a valid canditate.
- * Select the biggest valid candidate.
- */
- if (!erase && tested_erase->size)
- erase = tested_erase;
- /* keep iterating to find the wanted_size */
- }
-
- if (!erase)
- return NULL;
-
- /* Disable all other Sector Erase commands. */
- map->uniform_erase_type &= ~SNOR_ERASE_TYPE_MASK;
- map->uniform_erase_type |= BIT(erase - map->erase_type);
- return erase;
-}
-
-static int spi_nor_select_erase(struct spi_nor *nor)
-{
- struct spi_nor_erase_map *map = &nor->params.erase_map;
- const struct spi_nor_erase_type *erase = NULL;
- struct mtd_info *mtd = &nor->mtd;
- u32 wanted_size = nor->info->sector_size;
- int i;
-
- /*
- * The previous implementation handling Sector Erase commands assumed
- * that the SPI flash memory has an uniform layout then used only one
- * of the supported erase sizes for all Sector Erase commands.
- * So to be backward compatible, the new implementation also tries to
- * manage the SPI flash memory as uniform with a single erase sector
- * size, when possible.
- */
-#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
- /* prefer "small sector" erase if possible */
- wanted_size = 4096u;
-#endif
-
- if (spi_nor_has_uniform_erase(nor)) {
- erase = spi_nor_select_uniform_erase(map, wanted_size);
- if (!erase)
- return -EINVAL;
- nor->erase_opcode = erase->opcode;
- mtd->erasesize = erase->size;
- return 0;
- }
-
- /*
- * For non-uniform SPI flash memory, set mtd->erasesize to the
- * maximum erase sector size. No need to set nor->erase_opcode.
- */
- for (i = SNOR_ERASE_TYPE_MAX - 1; i >= 0; i--) {
- if (map->erase_type[i].size) {
- erase = &map->erase_type[i];
- break;
- }
- }
-
- if (!erase)
- return -EINVAL;
-
- mtd->erasesize = erase->size;
- return 0;
-}
-
-static int spi_nor_default_setup(struct spi_nor *nor,
- const struct spi_nor_hwcaps *hwcaps)
-{
- struct spi_nor_flash_parameter *params = &nor->params;
- u32 ignored_mask, shared_mask;
- int err;
-
- /*
- * Keep only the hardware capabilities supported by both the SPI
- * controller and the SPI flash memory.
- */
- shared_mask = hwcaps->mask & params->hwcaps.mask;
-
- if (nor->spimem) {
- /*
- * When called from spi_nor_probe(), all caps are set and we
- * need to discard some of them based on what the SPI
- * controller actually supports (using spi_mem_supports_op()).
- */
- spi_nor_spimem_adjust_hwcaps(nor, &shared_mask);
- } else {
- /*
- * SPI n-n-n protocols are not supported when the SPI
- * controller directly implements the spi_nor interface.
- * Yet another reason to switch to spi-mem.
- */
- ignored_mask = SNOR_HWCAPS_X_X_X;
- if (shared_mask & ignored_mask) {
- dev_dbg(nor->dev,
- "SPI n-n-n protocols are not supported.\n");
- shared_mask &= ~ignored_mask;
- }
- }
-
- /* Select the (Fast) Read command. */
- err = spi_nor_select_read(nor, shared_mask);
- if (err) {
- dev_dbg(nor->dev,
- "can't select read settings supported by both the SPI controller and memory.\n");
- return err;
- }
-
- /* Select the Page Program command. */
- err = spi_nor_select_pp(nor, shared_mask);
- if (err) {
- dev_dbg(nor->dev,
- "can't select write settings supported by both the SPI controller and memory.\n");
- return err;
- }
-
- /* Select the Sector Erase command. */
- err = spi_nor_select_erase(nor);
- if (err) {
- dev_dbg(nor->dev,
- "can't select erase settings supported by both the SPI controller and memory.\n");
- return err;
- }
-
- return 0;
-}
-
-static int spi_nor_setup(struct spi_nor *nor,
- const struct spi_nor_hwcaps *hwcaps)
-{
- if (!nor->params.setup)
- return 0;
-
- return nor->params.setup(nor, hwcaps);
-}
-
-static void atmel_set_default_init(struct spi_nor *nor)
-{
- nor->flags |= SNOR_F_HAS_LOCK;
-}
-
-static void intel_set_default_init(struct spi_nor *nor)
-{
- nor->flags |= SNOR_F_HAS_LOCK;
-}
-
-static void issi_set_default_init(struct spi_nor *nor)
-{
- nor->params.quad_enable = spi_nor_sr1_bit6_quad_enable;
-}
-
-static void macronix_set_default_init(struct spi_nor *nor)
-{
- nor->params.quad_enable = spi_nor_sr1_bit6_quad_enable;
- nor->params.set_4byte = macronix_set_4byte;
-}
-
-static void sst_set_default_init(struct spi_nor *nor)
-{
- nor->flags |= SNOR_F_HAS_LOCK;
-}
-
-static void st_micron_set_default_init(struct spi_nor *nor)
-{
- nor->flags |= SNOR_F_HAS_LOCK;
- nor->flags &= ~SNOR_F_HAS_16BIT_SR;
- nor->params.quad_enable = NULL;
- nor->params.set_4byte = st_micron_set_4byte;
-}
-
-static void winbond_set_default_init(struct spi_nor *nor)
-{
- nor->params.set_4byte = winbond_set_4byte;
-}
-
-/**
- * spi_nor_manufacturer_init_params() - Initialize the flash's parameters and
- * settings based on MFR register and ->default_init() hook.
- * @nor: pointer to a 'struct spi-nor'.
- */
-static void spi_nor_manufacturer_init_params(struct spi_nor *nor)
-{
- /* Init flash parameters based on MFR */
- switch (JEDEC_MFR(nor->info)) {
- case SNOR_MFR_ATMEL:
- atmel_set_default_init(nor);
- break;
-
- case SNOR_MFR_INTEL:
- intel_set_default_init(nor);
- break;
-
- case SNOR_MFR_ISSI:
- issi_set_default_init(nor);
- break;
-
- case SNOR_MFR_MACRONIX:
- macronix_set_default_init(nor);
- break;
-
- case SNOR_MFR_ST:
- case SNOR_MFR_MICRON:
- st_micron_set_default_init(nor);
- break;
-
- case SNOR_MFR_SST:
- sst_set_default_init(nor);
- break;
-
- case SNOR_MFR_WINBOND:
- winbond_set_default_init(nor);
- break;
-
- default:
- break;
- }
-
- if (nor->info->fixups && nor->info->fixups->default_init)
- nor->info->fixups->default_init(nor);
-}
-
-/**
- * spi_nor_sfdp_init_params() - Initialize the flash's parameters and settings
- * based on JESD216 SFDP standard.
- * @nor: pointer to a 'struct spi-nor'.
- *
- * The method has a roll-back mechanism: in case the SFDP parsing fails, the
- * legacy flash parameters and settings will be restored.
- */
-static void spi_nor_sfdp_init_params(struct spi_nor *nor)
-{
- struct spi_nor_flash_parameter sfdp_params;
-
- memcpy(&sfdp_params, &nor->params, sizeof(sfdp_params));
-
- if (spi_nor_parse_sfdp(nor, &sfdp_params)) {
- nor->addr_width = 0;
- nor->flags &= ~SNOR_F_4B_OPCODES;
- } else {
- memcpy(&nor->params, &sfdp_params, sizeof(nor->params));
- }
-}
-
-/**
- * spi_nor_info_init_params() - Initialize the flash's parameters and settings
- * based on nor->info data.
- * @nor: pointer to a 'struct spi-nor'.
- */
-static void spi_nor_info_init_params(struct spi_nor *nor)
-{
- struct spi_nor_flash_parameter *params = &nor->params;
- struct spi_nor_erase_map *map = ¶ms->erase_map;
- const struct flash_info *info = nor->info;
- struct device_node *np = spi_nor_get_flash_node(nor);
- u8 i, erase_mask;
-
- /* Initialize legacy flash parameters and settings. */
- params->quad_enable = spi_nor_sr2_bit1_quad_enable;
- params->set_4byte = spansion_set_4byte;
- params->setup = spi_nor_default_setup;
- /* Default to 16-bit Write Status (01h) Command */
- nor->flags |= SNOR_F_HAS_16BIT_SR;
-
- /* Set SPI NOR sizes. */
- params->size = (u64)info->sector_size * info->n_sectors;
- params->page_size = info->page_size;
-
- if (!(info->flags & SPI_NOR_NO_FR)) {
- /* Default to Fast Read for DT and non-DT platform devices. */
- params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST;
-
- /* Mask out Fast Read if not requested at DT instantiation. */
- if (np && !of_property_read_bool(np, "m25p,fast-read"))
- params->hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST;
- }
-
- /* (Fast) Read settings. */
- params->hwcaps.mask |= SNOR_HWCAPS_READ;
- spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ],
- 0, 0, SPINOR_OP_READ,
- SNOR_PROTO_1_1_1);
-
- if (params->hwcaps.mask & SNOR_HWCAPS_READ_FAST)
- spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_FAST],
- 0, 8, SPINOR_OP_READ_FAST,
- SNOR_PROTO_1_1_1);
-
- if (info->flags & SPI_NOR_DUAL_READ) {
- params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;
- spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_2],
- 0, 8, SPINOR_OP_READ_1_1_2,
- SNOR_PROTO_1_1_2);
- }
-
- if (info->flags & SPI_NOR_QUAD_READ) {
- params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
- spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_4],
- 0, 8, SPINOR_OP_READ_1_1_4,
- SNOR_PROTO_1_1_4);
- }
-
- if (info->flags & SPI_NOR_OCTAL_READ) {
- params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
- spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_8],
- 0, 8, SPINOR_OP_READ_1_1_8,
- SNOR_PROTO_1_1_8);
- }
-
- /* Page Program settings. */
- params->hwcaps.mask |= SNOR_HWCAPS_PP;
- spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP],
- SPINOR_OP_PP, SNOR_PROTO_1_1_1);
-
- /*
- * Sector Erase settings. Sort Erase Types in ascending order, with the
- * smallest erase size starting at BIT(0).
- */
- erase_mask = 0;
- i = 0;
- if (info->flags & SECT_4K_PMC) {
- erase_mask |= BIT(i);
- spi_nor_set_erase_type(&map->erase_type[i], 4096u,
- SPINOR_OP_BE_4K_PMC);
- i++;
- } else if (info->flags & SECT_4K) {
- erase_mask |= BIT(i);
- spi_nor_set_erase_type(&map->erase_type[i], 4096u,
- SPINOR_OP_BE_4K);
- i++;
- }
- erase_mask |= BIT(i);
- spi_nor_set_erase_type(&map->erase_type[i], info->sector_size,
- SPINOR_OP_SE);
- spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
-}
-
-static void spansion_post_sfdp_fixups(struct spi_nor *nor)
-{
- if (nor->params.size <= SZ_16M)
- return;
-
- nor->flags |= SNOR_F_4B_OPCODES;
- /* No small sector erase for 4-byte command set */
- nor->erase_opcode = SPINOR_OP_SE;
- nor->mtd.erasesize = nor->info->sector_size;
-}
-
-static void s3an_post_sfdp_fixups(struct spi_nor *nor)
-{
- nor->params.setup = s3an_nor_setup;
-}
-
-/**
- * spi_nor_post_sfdp_fixups() - Updates the flash's parameters and settings
- * after SFDP has been parsed (is also called for SPI NORs that do not
- * support RDSFDP).
- * @nor: pointer to a 'struct spi_nor'
- *
- * Typically used to tweak various parameters that could not be extracted by
- * other means (i.e. when information provided by the SFDP/flash_info tables
- * are incomplete or wrong).
- */
-static void spi_nor_post_sfdp_fixups(struct spi_nor *nor)
-{
- switch (JEDEC_MFR(nor->info)) {
- case SNOR_MFR_SPANSION:
- spansion_post_sfdp_fixups(nor);
- break;
-
- default:
- break;
- }
-
- if (nor->info->flags & SPI_S3AN)
- s3an_post_sfdp_fixups(nor);
-
- if (nor->info->fixups && nor->info->fixups->post_sfdp)
- nor->info->fixups->post_sfdp(nor);
-}
-
-/**
- * spi_nor_late_init_params() - Late initialization of default flash parameters.
- * @nor: pointer to a 'struct spi_nor'
- *
- * Used to set default flash parameters and settings when the ->default_init()
- * hook or the SFDP parser let voids.
- */
-static void spi_nor_late_init_params(struct spi_nor *nor)
-{
- /*
- * NOR protection support. When locking_ops are not provided, we pick
- * the default ones.
- */
- if (nor->flags & SNOR_F_HAS_LOCK && !nor->params.locking_ops)
- nor->params.locking_ops = &stm_locking_ops;
-}
-
-/**
- * spi_nor_init_params() - Initialize the flash's parameters and settings.
- * @nor: pointer to a 'struct spi-nor'.
- *
- * The flash parameters and settings are initialized based on a sequence of
- * calls that are ordered by priority:
- *
- * 1/ Default flash parameters initialization. The initializations are done
- * based on nor->info data:
- * spi_nor_info_init_params()
- *
- * which can be overwritten by:
- * 2/ Manufacturer flash parameters initialization. The initializations are
- * done based on MFR register, or when the decisions can not be done solely
- * based on MFR, by using specific flash_info tweeks, ->default_init():
- * spi_nor_manufacturer_init_params()
- *
- * which can be overwritten by:
- * 3/ SFDP flash parameters initialization. JESD216 SFDP is a standard and
- * should be more accurate that the above.
- * spi_nor_sfdp_init_params()
- *
- * Please note that there is a ->post_bfpt() fixup hook that can overwrite
- * the flash parameters and settings immediately after parsing the Basic
- * Flash Parameter Table.
- *
- * which can be overwritten by:
- * 4/ Post SFDP flash parameters initialization. Used to tweak various
- * parameters that could not be extracted by other means (i.e. when
- * information provided by the SFDP/flash_info tables are incomplete or
- * wrong).
- * spi_nor_post_sfdp_fixups()
- *
- * 5/ Late default flash parameters initialization, used when the
- * ->default_init() hook or the SFDP parser do not set specific params.
- * spi_nor_late_init_params()
- */
-static void spi_nor_init_params(struct spi_nor *nor)
-{
- spi_nor_info_init_params(nor);
-
- spi_nor_manufacturer_init_params(nor);
-
- if ((nor->info->flags & (SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)) &&
- !(nor->info->flags & SPI_NOR_SKIP_SFDP))
- spi_nor_sfdp_init_params(nor);
-
- spi_nor_post_sfdp_fixups(nor);
-
- spi_nor_late_init_params(nor);
-}
-
-/**
- * spi_nor_quad_enable() - enable Quad I/O if needed.
- * @nor: pointer to a 'struct spi_nor'
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_quad_enable(struct spi_nor *nor)
-{
- if (!nor->params.quad_enable)
- return 0;
-
- if (!(spi_nor_get_protocol_width(nor->read_proto) == 4 ||
- spi_nor_get_protocol_width(nor->write_proto) == 4))
- return 0;
-
- return nor->params.quad_enable(nor);
-}
-
-/**
- * spi_nor_unlock_all() - Unlocks the entire flash memory array.
- * @nor: pointer to a 'struct spi_nor'.
- *
- * Some SPI NOR flashes are write protected by default after a power-on reset
- * cycle, in order to avoid inadvertent writes during power-up. Backward
- * compatibility imposes to unlock the entire flash memory array at power-up
- * by default.
- */
-static int spi_nor_unlock_all(struct spi_nor *nor)
-{
- if (nor->flags & SNOR_F_HAS_LOCK)
- return spi_nor_unlock(&nor->mtd, 0, nor->params.size);
-
- return 0;
-}
-
-static int spi_nor_init(struct spi_nor *nor)
-{
- int err;
-
- err = spi_nor_quad_enable(nor);
- if (err) {
- dev_dbg(nor->dev, "quad mode not supported\n");
- return err;
- }
-
- err = spi_nor_unlock_all(nor);
- if (err) {
- dev_dbg(nor->dev, "Failed to unlock the entire flash memory array\n");
- return err;
- }
-
- if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES)) {
- /*
- * If the RESET# pin isn't hooked up properly, or the system
- * otherwise doesn't perform a reset command in the boot
- * sequence, it's impossible to 100% protect against unexpected
- * reboots (e.g., crashes). Warn the user (or hopefully, system
- * designer) that this is bad.
- */
- WARN_ONCE(nor->flags & SNOR_F_BROKEN_RESET,
- "enabling reset hack; may not recover from unexpected reboots\n");
- nor->params.set_4byte(nor, true);
- }
-
- return 0;
-}
-
-/* mtd resume handler */
-static void spi_nor_resume(struct mtd_info *mtd)
-{
- struct spi_nor *nor = mtd_to_spi_nor(mtd);
- struct device *dev = nor->dev;
- int ret;
-
- /* re-initialize the nor chip */
- ret = spi_nor_init(nor);
- if (ret)
- dev_err(dev, "resume() failed\n");
-}
-
-void spi_nor_restore(struct spi_nor *nor)
-{
- /* restore the addressing mode */
- if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES) &&
- nor->flags & SNOR_F_BROKEN_RESET)
- nor->params.set_4byte(nor, false);
-}
-EXPORT_SYMBOL_GPL(spi_nor_restore);
-
-static const struct flash_info *spi_nor_match_id(const char *name)
-{
- const struct flash_info *id = spi_nor_ids;
-
- while (id->name) {
- if (!strcmp(name, id->name))
- return id;
- id++;
- }
- return NULL;
-}
-
-static int spi_nor_set_addr_width(struct spi_nor *nor)
-{
- if (nor->addr_width) {
- /* already configured from SFDP */
- } else if (nor->info->addr_width) {
- nor->addr_width = nor->info->addr_width;
- } else if (nor->mtd.size > 0x1000000) {
- /* enable 4-byte addressing if the device exceeds 16MiB */
- nor->addr_width = 4;
- } else {
- nor->addr_width = 3;
- }
-
- if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
- dev_dbg(nor->dev, "address width is too large: %u\n",
- nor->addr_width);
- return -EINVAL;
- }
-
- /* Set 4byte opcodes when possible. */
- if (nor->addr_width == 4 && nor->flags & SNOR_F_4B_OPCODES &&
- !(nor->flags & SNOR_F_HAS_4BAIT))
- spi_nor_set_4byte_opcodes(nor);
-
- return 0;
-}
-
-static void spi_nor_debugfs_init(struct spi_nor *nor,
- const struct flash_info *info)
-{
- struct mtd_info *mtd = &nor->mtd;
-
- mtd->dbg.partname = info->name;
- mtd->dbg.partid = devm_kasprintf(nor->dev, GFP_KERNEL, "spi-nor:%*phN",
- info->id_len, info->id);
-}
-
-static const struct flash_info *spi_nor_get_flash_info(struct spi_nor *nor,
- const char *name)
-{
- const struct flash_info *info = NULL;
-
- if (name)
- info = spi_nor_match_id(name);
- /* Try to auto-detect if chip name wasn't specified or not found */
- if (!info)
- info = spi_nor_read_id(nor);
- if (IS_ERR_OR_NULL(info))
- return ERR_PTR(-ENOENT);
-
- /*
- * If caller has specified name of flash model that can normally be
- * detected using JEDEC, let's verify it.
- */
- if (name && info->id_len) {
- const struct flash_info *jinfo;
-
- jinfo = spi_nor_read_id(nor);
- if (IS_ERR(jinfo)) {
- return jinfo;
- } else if (jinfo != info) {
- /*
- * JEDEC knows better, so overwrite platform ID. We
- * can't trust partitions any longer, but we'll let
- * mtd apply them anyway, since some partitions may be
- * marked read-only, and we don't want to lose that
- * information, even if it's not 100% accurate.
- */
- dev_warn(nor->dev, "found %s, expected %s\n",
- jinfo->name, info->name);
- info = jinfo;
- }
- }
-
- return info;
-}
-
-int spi_nor_scan(struct spi_nor *nor, const char *name,
- const struct spi_nor_hwcaps *hwcaps)
-{
- const struct flash_info *info;
- struct device *dev = nor->dev;
- struct mtd_info *mtd = &nor->mtd;
- struct device_node *np = spi_nor_get_flash_node(nor);
- struct spi_nor_flash_parameter *params = &nor->params;
- int ret;
- int i;
-
- ret = spi_nor_check(nor);
- if (ret)
- return ret;
-
- /* Reset SPI protocol for all commands. */
- nor->reg_proto = SNOR_PROTO_1_1_1;
- nor->read_proto = SNOR_PROTO_1_1_1;
- nor->write_proto = SNOR_PROTO_1_1_1;
-
- /*
- * We need the bounce buffer early to read/write registers when going
- * through the spi-mem layer (buffers have to be DMA-able).
- * For spi-mem drivers, we'll reallocate a new buffer if
- * nor->page_size turns out to be greater than PAGE_SIZE (which
- * shouldn't happen before long since NOR pages are usually less
- * than 1KB) after spi_nor_scan() returns.
- */
- nor->bouncebuf_size = PAGE_SIZE;
- nor->bouncebuf = devm_kmalloc(dev, nor->bouncebuf_size,
- GFP_KERNEL);
- if (!nor->bouncebuf)
- return -ENOMEM;
-
- info = spi_nor_get_flash_info(nor, name);
- if (IS_ERR(info))
- return PTR_ERR(info);
-
- nor->info = info;
-
- spi_nor_debugfs_init(nor, info);
-
- mutex_init(&nor->lock);
-
- /*
- * Make sure the XSR_RDY flag is set before calling
- * spi_nor_wait_till_ready(). Xilinx S3AN share MFR
- * with Atmel spi-nor
- */
- if (info->flags & SPI_NOR_XSR_RDY)
- nor->flags |= SNOR_F_READY_XSR_RDY;
-
- if (info->flags & SPI_NOR_HAS_LOCK)
- nor->flags |= SNOR_F_HAS_LOCK;
-
- /* Init flash parameters based on flash_info struct and SFDP */
- spi_nor_init_params(nor);
-
- if (!mtd->name)
- mtd->name = dev_name(dev);
- mtd->priv = nor;
- mtd->type = MTD_NORFLASH;
- mtd->writesize = 1;
- mtd->flags = MTD_CAP_NORFLASH;
- mtd->size = params->size;
- mtd->_erase = spi_nor_erase;
- mtd->_read = spi_nor_read;
- mtd->_resume = spi_nor_resume;
-
- if (nor->params.locking_ops) {
- mtd->_lock = spi_nor_lock;
- mtd->_unlock = spi_nor_unlock;
- mtd->_is_locked = spi_nor_is_locked;
- }
-
- /* sst nor chips use AAI word program */
- if (info->flags & SST_WRITE)
- mtd->_write = sst_write;
- else
- mtd->_write = spi_nor_write;
-
- if (info->flags & USE_FSR)
- nor->flags |= SNOR_F_USE_FSR;
- if (info->flags & SPI_NOR_HAS_TB) {
- nor->flags |= SNOR_F_HAS_SR_TB;
- if (info->flags & SPI_NOR_TB_SR_BIT6)
- nor->flags |= SNOR_F_HAS_SR_TB_BIT6;
- }
-
- if (info->flags & NO_CHIP_ERASE)
- nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
- if (info->flags & USE_CLSR)
- nor->flags |= SNOR_F_USE_CLSR;
-
- if (info->flags & SPI_NOR_NO_ERASE)
- mtd->flags |= MTD_NO_ERASE;
-
- mtd->dev.parent = dev;
- nor->page_size = params->page_size;
- mtd->writebufsize = nor->page_size;
-
- if (of_property_read_bool(np, "broken-flash-reset"))
- nor->flags |= SNOR_F_BROKEN_RESET;
-
- /*
- * Configure the SPI memory:
- * - select op codes for (Fast) Read, Page Program and Sector Erase.
- * - set the number of dummy cycles (mode cycles + wait states).
- * - set the SPI protocols for register and memory accesses.
- */
- ret = spi_nor_setup(nor, hwcaps);
- if (ret)
- return ret;
-
- if (info->flags & SPI_NOR_4B_OPCODES)
- nor->flags |= SNOR_F_4B_OPCODES;
-
- ret = spi_nor_set_addr_width(nor);
- if (ret)
- return ret;
-
- /* Send all the required SPI flash commands to initialize device */
- ret = spi_nor_init(nor);
- if (ret)
- return ret;
-
- dev_info(dev, "%s (%lld Kbytes)\n", info->name,
- (long long)mtd->size >> 10);
-
- dev_dbg(dev,
- "mtd .name = %s, .size = 0x%llx (%lldMiB), "
- ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
- mtd->name, (long long)mtd->size, (long long)(mtd->size >> 20),
- mtd->erasesize, mtd->erasesize / 1024, mtd->numeraseregions);
-
- if (mtd->numeraseregions)
- for (i = 0; i < mtd->numeraseregions; i++)
- dev_dbg(dev,
- "mtd.eraseregions[%d] = { .offset = 0x%llx, "
- ".erasesize = 0x%.8x (%uKiB), "
- ".numblocks = %d }\n",
- i, (long long)mtd->eraseregions[i].offset,
- mtd->eraseregions[i].erasesize,
- mtd->eraseregions[i].erasesize / 1024,
- mtd->eraseregions[i].numblocks);
- return 0;
-}
-EXPORT_SYMBOL_GPL(spi_nor_scan);
-
-static int spi_nor_probe(struct spi_mem *spimem)
-{
- struct spi_device *spi = spimem->spi;
- struct flash_platform_data *data = dev_get_platdata(&spi->dev);
- struct spi_nor *nor;
- /*
- * Enable all caps by default. The core will mask them after
- * checking what's really supported using spi_mem_supports_op().
- */
- const struct spi_nor_hwcaps hwcaps = { .mask = SNOR_HWCAPS_ALL };
- char *flash_name;
- int ret;
-
- nor = devm_kzalloc(&spi->dev, sizeof(*nor), GFP_KERNEL);
- if (!nor)
- return -ENOMEM;
-
- nor->spimem = spimem;
- nor->dev = &spi->dev;
- spi_nor_set_flash_node(nor, spi->dev.of_node);
-
- spi_mem_set_drvdata(spimem, nor);
-
- if (data && data->name)
- nor->mtd.name = data->name;
-
- if (!nor->mtd.name)
- nor->mtd.name = spi_mem_get_name(spimem);
-
- /*
- * For some (historical?) reason many platforms provide two different
- * names in flash_platform_data: "name" and "type". Quite often name is
- * set to "m25p80" and then "type" provides a real chip name.
- * If that's the case, respect "type" and ignore a "name".
- */
- if (data && data->type)
- flash_name = data->type;
- else if (!strcmp(spi->modalias, "spi-nor"))
- flash_name = NULL; /* auto-detect */
- else
- flash_name = spi->modalias;
-
- ret = spi_nor_scan(nor, flash_name, &hwcaps);
- if (ret)
- return ret;
-
- /*
- * None of the existing parts have > 512B pages, but let's play safe
- * and add this logic so that if anyone ever adds support for such
- * a NOR we don't end up with buffer overflows.
- */
- if (nor->page_size > PAGE_SIZE) {
- nor->bouncebuf_size = nor->page_size;
- devm_kfree(nor->dev, nor->bouncebuf);
- nor->bouncebuf = devm_kmalloc(nor->dev,
- nor->bouncebuf_size,
- GFP_KERNEL);
- if (!nor->bouncebuf)
- return -ENOMEM;
- }
-
- return mtd_device_register(&nor->mtd, data ? data->parts : NULL,
- data ? data->nr_parts : 0);
-}
-
-static int spi_nor_remove(struct spi_mem *spimem)
-{
- struct spi_nor *nor = spi_mem_get_drvdata(spimem);
-
- spi_nor_restore(nor);
-
- /* Clean up MTD stuff. */
- return mtd_device_unregister(&nor->mtd);
-}
-
-static void spi_nor_shutdown(struct spi_mem *spimem)
-{
- struct spi_nor *nor = spi_mem_get_drvdata(spimem);
-
- spi_nor_restore(nor);
-}
-
-/*
- * Do NOT add to this array without reading the following:
- *
- * Historically, many flash devices are bound to this driver by their name. But
- * since most of these flash are compatible to some extent, and their
- * differences can often be differentiated by the JEDEC read-ID command, we
- * encourage new users to add support to the spi-nor library, and simply bind
- * against a generic string here (e.g., "jedec,spi-nor").
- *
- * Many flash names are kept here in this list (as well as in spi-nor.c) to
- * keep them available as module aliases for existing platforms.
- */
-static const struct spi_device_id spi_nor_dev_ids[] = {
- /*
- * Allow non-DT platform devices to bind to the "spi-nor" modalias, and
- * hack around the fact that the SPI core does not provide uevent
- * matching for .of_match_table
- */
- {"spi-nor"},
-
- /*
- * Entries not used in DTs that should be safe to drop after replacing
- * them with "spi-nor" in platform data.
- */
- {"s25sl064a"}, {"w25x16"}, {"m25p10"}, {"m25px64"},
-
- /*
- * Entries that were used in DTs without "jedec,spi-nor" fallback and
- * should be kept for backward compatibility.
- */
- {"at25df321a"}, {"at25df641"}, {"at26df081a"},
- {"mx25l4005a"}, {"mx25l1606e"}, {"mx25l6405d"}, {"mx25l12805d"},
- {"mx25l25635e"},{"mx66l51235l"},
- {"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, {"n25q512a"},
- {"s25fl256s1"}, {"s25fl512s"}, {"s25sl12801"}, {"s25fl008k"},
- {"s25fl064k"},
- {"sst25vf040b"},{"sst25vf016b"},{"sst25vf032b"},{"sst25wf040"},
- {"m25p40"}, {"m25p80"}, {"m25p16"}, {"m25p32"},
- {"m25p64"}, {"m25p128"},
- {"w25x80"}, {"w25x32"}, {"w25q32"}, {"w25q32dw"},
- {"w25q80bl"}, {"w25q128"}, {"w25q256"},
-
- /* Flashes that can't be detected using JEDEC */
- {"m25p05-nonjedec"}, {"m25p10-nonjedec"}, {"m25p20-nonjedec"},
- {"m25p40-nonjedec"}, {"m25p80-nonjedec"}, {"m25p16-nonjedec"},
- {"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"},
-
- /* Everspin MRAMs (non-JEDEC) */
- { "mr25h128" }, /* 128 Kib, 40 MHz */
- { "mr25h256" }, /* 256 Kib, 40 MHz */
- { "mr25h10" }, /* 1 Mib, 40 MHz */
- { "mr25h40" }, /* 4 Mib, 40 MHz */
-
- { },
-};
-MODULE_DEVICE_TABLE(spi, spi_nor_dev_ids);
-
-static const struct of_device_id spi_nor_of_table[] = {
- /*
- * Generic compatibility for SPI NOR that can be identified by the
- * JEDEC READ ID opcode (0x9F). Use this, if possible.
- */
- { .compatible = "jedec,spi-nor" },
- { /* sentinel */ },
-};
-MODULE_DEVICE_TABLE(of, spi_nor_of_table);
-
-/*
- * REVISIT: many of these chips have deep power-down modes, which
- * should clearly be entered on suspend() to minimize power use.
- * And also when they're otherwise idle...
- */
-static struct spi_mem_driver spi_nor_driver = {
- .spidrv = {
- .driver = {
- .name = "spi-nor",
- .of_match_table = spi_nor_of_table,
- },
- .id_table = spi_nor_dev_ids,
- },
- .probe = spi_nor_probe,
- .remove = spi_nor_remove,
- .shutdown = spi_nor_shutdown,
-};
-module_spi_mem_driver(spi_nor_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Huang Shijie <shijie8@gmail.com>");
-MODULE_AUTHOR("Mike Lavender");
-MODULE_DESCRIPTION("framework for SPI NOR");
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info sst_parts[] = {
+ /* SST -- large erase sizes are "overlays", "sectors" are 4K */
+ { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8,
+ SECT_4K | SST_WRITE) },
+ { "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16,
+ SECT_4K | SST_WRITE) },
+ { "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32,
+ SECT_4K | SST_WRITE) },
+ { "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64,
+ SECT_4K | SST_WRITE) },
+ { "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128, SECT_4K) },
+ { "sst25wf512", INFO(0xbf2501, 0, 64 * 1024, 1,
+ SECT_4K | SST_WRITE) },
+ { "sst25wf010", INFO(0xbf2502, 0, 64 * 1024, 2,
+ SECT_4K | SST_WRITE) },
+ { "sst25wf020", INFO(0xbf2503, 0, 64 * 1024, 4,
+ SECT_4K | SST_WRITE) },
+ { "sst25wf020a", INFO(0x621612, 0, 64 * 1024, 4, SECT_4K) },
+ { "sst25wf040b", INFO(0x621613, 0, 64 * 1024, 8, SECT_4K) },
+ { "sst25wf040", INFO(0xbf2504, 0, 64 * 1024, 8,
+ SECT_4K | SST_WRITE) },
+ { "sst25wf080", INFO(0xbf2505, 0, 64 * 1024, 16,
+ SECT_4K | SST_WRITE) },
+ { "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32,
+ SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+ { "sst26vf016b", INFO(0xbf2641, 0, 64 * 1024, 32,
+ SECT_4K | SPI_NOR_DUAL_READ) },
+ { "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128,
+ SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ) },
+};
+
+static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ struct spi_nor *nor = mtd_to_spi_nor(mtd);
+ size_t actual = 0;
+ int ret;
+
+ dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
+
+ ret = spi_nor_lock_and_prep(nor);
+ if (ret)
+ return ret;
+
+ ret = spi_nor_write_enable(nor);
+ if (ret)
+ goto out;
+
+ nor->sst_write_second = false;
+
+ /* Start write from odd address. */
+ if (to % 2) {
+ nor->program_opcode = SPINOR_OP_BP;
+
+ /* write one byte. */
+ ret = spi_nor_write_data(nor, to, 1, buf);
+ if (ret < 0)
+ goto out;
+ WARN(ret != 1, "While writing 1 byte written %i bytes\n", ret);
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ goto out;
+
+ to++;
+ actual++;
+ }
+
+ /* Write out most of the data here. */
+ for (; actual < len - 1; actual += 2) {
+ nor->program_opcode = SPINOR_OP_AAI_WP;
+
+ /* write two bytes. */
+ ret = spi_nor_write_data(nor, to, 2, buf + actual);
+ if (ret < 0)
+ goto out;
+ WARN(ret != 2, "While writing 2 bytes written %i bytes\n", ret);
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ goto out;
+ to += 2;
+ nor->sst_write_second = true;
+ }
+ nor->sst_write_second = false;
+
+ ret = spi_nor_write_disable(nor);
+ if (ret)
+ goto out;
+
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ goto out;
+
+ /* Write out trailing byte if it exists. */
+ if (actual != len) {
+ ret = spi_nor_write_enable(nor);
+ if (ret)
+ goto out;
+
+ nor->program_opcode = SPINOR_OP_BP;
+ ret = spi_nor_write_data(nor, to, 1, buf + actual);
+ if (ret < 0)
+ goto out;
+ WARN(ret != 1, "While writing 1 byte written %i bytes\n", ret);
+ ret = spi_nor_wait_till_ready(nor);
+ if (ret)
+ goto out;
+
+ actual += 1;
+
+ ret = spi_nor_write_disable(nor);
+ }
+out:
+ *retlen += actual;
+ spi_nor_unlock_and_unprep(nor);
+ return ret;
+}
+
+static void sst_default_init(struct spi_nor *nor)
+{
+ nor->flags |= SNOR_F_HAS_LOCK;
+}
+
+static void sst_post_sfdp_fixups(struct spi_nor *nor)
+{
+ if (nor->info->flags & SST_WRITE)
+ nor->mtd._write = sst_write;
+}
+
+static const struct spi_nor_fixups sst_fixups = {
+ .default_init = sst_default_init,
+ .post_sfdp = sst_post_sfdp_fixups,
+};
+
+const struct spi_nor_manufacturer spi_nor_sst = {
+ .name = "sst",
+ .parts = sst_parts,
+ .nparts = ARRAY_SIZE(sst_parts),
+ .fixups = &sst_fixups,
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info winbond_parts[] = {
+ /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
+ { "w25x05", INFO(0xef3010, 0, 64 * 1024, 1, SECT_4K) },
+ { "w25x10", INFO(0xef3011, 0, 64 * 1024, 2, SECT_4K) },
+ { "w25x20", INFO(0xef3012, 0, 64 * 1024, 4, SECT_4K) },
+ { "w25x40", INFO(0xef3013, 0, 64 * 1024, 8, SECT_4K) },
+ { "w25x80", INFO(0xef3014, 0, 64 * 1024, 16, SECT_4K) },
+ { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) },
+ { "w25q16dw", INFO(0xef6015, 0, 64 * 1024, 32,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+ { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) },
+ { "w25q16jv-im/jm", INFO(0xef7015, 0, 64 * 1024, 32,
+ SECT_4K | SPI_NOR_DUAL_READ |
+ SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK |
+ SPI_NOR_HAS_TB) },
+ { "w25q20cl", INFO(0xef4012, 0, 64 * 1024, 4, SECT_4K) },
+ { "w25q20bw", INFO(0xef5012, 0, 64 * 1024, 4, SECT_4K) },
+ { "w25q20ew", INFO(0xef6012, 0, 64 * 1024, 4, SECT_4K) },
+ { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) },
+ { "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+ { "w25q32jv", INFO(0xef7016, 0, 64 * 1024, 64,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+ },
+ { "w25q32jwm", INFO(0xef8016, 0, 64 * 1024, 64,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+ { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
+ { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
+ { "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+ { "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+ { "w25q128jv", INFO(0xef7018, 0, 64 * 1024, 256,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+ { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
+ { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
+ { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
+ { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+ SPI_NOR_4B_OPCODES) },
+ { "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
+ SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
+};
+
+/**
+ * winbond_set_4byte_addr_mode() - Set 4-byte address mode for Winbond flashes.
+ * @nor: pointer to 'struct spi_nor'.
+ * @enable: true to enter the 4-byte address mode, false to exit the 4-byte
+ * address mode.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int winbond_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
+{
+ int ret;
+
+ ret = spi_nor_set_4byte_addr_mode(nor, enable);
+ if (ret || enable)
+ return ret;
+
+ /*
+ * On Winbond W25Q256FV, leaving 4byte mode causes the Extended Address
+ * Register to be set to 1, so all 3-byte-address reads come from the
+ * second 16M. We must clear the register to enable normal behavior.
+ */
+ ret = spi_nor_write_enable(nor);
+ if (ret)
+ return ret;
+
+ ret = spi_nor_write_ear(nor, 0);
+ if (ret)
+ return ret;
+
+ return spi_nor_write_disable(nor);
+}
+
+static void winbond_default_init(struct spi_nor *nor)
+{
+ nor->params->set_4byte_addr_mode = winbond_set_4byte_addr_mode;
+}
+
+static const struct spi_nor_fixups winbond_fixups = {
+ .default_init = winbond_default_init,
+};
+
+const struct spi_nor_manufacturer spi_nor_winbond = {
+ .name = "winbond",
+ .parts = winbond_parts,
+ .nparts = ARRAY_SIZE(winbond_parts),
+ .fixups = &winbond_fixups,
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info xilinx_parts[] = {
+ /* Xilinx S3AN Internal Flash */
+ { "3S50AN", S3AN_INFO(0x1f2200, 64, 264) },
+ { "3S200AN", S3AN_INFO(0x1f2400, 256, 264) },
+ { "3S400AN", S3AN_INFO(0x1f2400, 256, 264) },
+ { "3S700AN", S3AN_INFO(0x1f2500, 512, 264) },
+ { "3S1400AN", S3AN_INFO(0x1f2600, 512, 528) },
+};
+
+/*
+ * This code converts an address to the Default Address Mode, that has non
+ * power of two page sizes. We must support this mode because it is the default
+ * mode supported by Xilinx tools, it can access the whole flash area and
+ * changing over to the Power-of-two mode is irreversible and corrupts the
+ * original data.
+ * Addr can safely be unsigned int, the biggest S3AN device is smaller than
+ * 4 MiB.
+ */
+static u32 s3an_convert_addr(struct spi_nor *nor, u32 addr)
+{
+ u32 offset, page;
+
+ offset = addr % nor->page_size;
+ page = addr / nor->page_size;
+ page <<= (nor->page_size > 512) ? 10 : 9;
+
+ return page | offset;
+}
+
+static int xilinx_nor_setup(struct spi_nor *nor,
+ const struct spi_nor_hwcaps *hwcaps)
+{
+ int ret;
+
+ ret = spi_nor_xread_sr(nor, nor->bouncebuf);
+ if (ret)
+ return ret;
+
+ nor->erase_opcode = SPINOR_OP_XSE;
+ nor->program_opcode = SPINOR_OP_XPP;
+ nor->read_opcode = SPINOR_OP_READ;
+ nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;
+
+ /*
+ * This flashes have a page size of 264 or 528 bytes (known as
+ * Default addressing mode). It can be changed to a more standard
+ * Power of two mode where the page size is 256/512. This comes
+ * with a price: there is 3% less of space, the data is corrupted
+ * and the page size cannot be changed back to default addressing
+ * mode.
+ *
+ * The current addressing mode can be read from the XRDSR register
+ * and should not be changed, because is a destructive operation.
+ */
+ if (nor->bouncebuf[0] & XSR_PAGESIZE) {
+ /* Flash in Power of 2 mode */
+ nor->page_size = (nor->page_size == 264) ? 256 : 512;
+ nor->mtd.writebufsize = nor->page_size;
+ nor->mtd.size = 8 * nor->page_size * nor->info->n_sectors;
+ nor->mtd.erasesize = 8 * nor->page_size;
+ } else {
+ /* Flash in Default addressing mode */
+ nor->params->convert_addr = s3an_convert_addr;
+ nor->mtd.erasesize = nor->info->sector_size;
+ }
+
+ return 0;
+}
+
+static void xilinx_post_sfdp_fixups(struct spi_nor *nor)
+{
+ nor->params->setup = xilinx_nor_setup;
+}
+
+static const struct spi_nor_fixups xilinx_fixups = {
+ .post_sfdp = xilinx_post_sfdp_fixups,
+};
+
+const struct spi_nor_manufacturer spi_nor_xilinx = {
+ .name = "xilinx",
+ .parts = xilinx_parts,
+ .nparts = ARRAY_SIZE(xilinx_parts),
+ .fixups = &xilinx_fixups,
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info xmc_parts[] = {
+ /* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
+ { "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+};
+
+const struct spi_nor_manufacturer spi_nor_xmc = {
+ .name = "xmc",
+ .parts = xmc_parts,
+ .nparts = ARRAY_SIZE(xmc_parts),
+};
help
This selects a driver for the MediaTek MT7621 SPI Controller.
+config SPI_MTK_NOR
+ tristate "MediaTek SPI NOR controller"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ help
+ This enables support for SPI NOR controller found on MediaTek
+ ARM SoCs. This is a controller specifically for SPI-NOR flash.
+ It can perform generic SPI transfers up to 6 bytes via generic
+ SPI interface as well as several SPI-NOR specific instructions
+ via SPI MEM interface.
+
config SPI_NPCM_FIU
tristate "Nuvoton NPCM FLASH Interface Unit"
depends on ARCH_NPCM || COMPILE_TEST
obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o
obj-$(CONFIG_SPI_MT65XX) += spi-mt65xx.o
obj-$(CONFIG_SPI_MT7621) += spi-mt7621.o
+obj-$(CONFIG_SPI_MTK_NOR) += spi-mtk-nor.o
obj-$(CONFIG_SPI_MXIC) += spi-mxic.o
obj-$(CONFIG_SPI_MXS) += spi-mxs.o
obj-$(CONFIG_SPI_NPCM_FIU) += spi-npcm-fiu.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+//
+// Mediatek SPI NOR controller driver
+//
+// Copyright (C) 2020 Chuanhong Guo <gch981213@gmail.com>
+
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
+#include <linux/string.h>
+
+#define DRIVER_NAME "mtk-spi-nor"
+
+#define MTK_NOR_REG_CMD 0x00
+#define MTK_NOR_CMD_WRITE BIT(4)
+#define MTK_NOR_CMD_PROGRAM BIT(2)
+#define MTK_NOR_CMD_READ BIT(0)
+#define MTK_NOR_CMD_MASK GENMASK(5, 0)
+
+#define MTK_NOR_REG_PRG_CNT 0x04
+#define MTK_NOR_REG_RDATA 0x0c
+
+#define MTK_NOR_REG_RADR0 0x10
+#define MTK_NOR_REG_RADR(n) (MTK_NOR_REG_RADR0 + 4 * (n))
+#define MTK_NOR_REG_RADR3 0xc8
+
+#define MTK_NOR_REG_WDATA 0x1c
+
+#define MTK_NOR_REG_PRGDATA0 0x20
+#define MTK_NOR_REG_PRGDATA(n) (MTK_NOR_REG_PRGDATA0 + 4 * (n))
+#define MTK_NOR_REG_PRGDATA_MAX 5
+
+#define MTK_NOR_REG_SHIFT0 0x38
+#define MTK_NOR_REG_SHIFT(n) (MTK_NOR_REG_SHIFT0 + 4 * (n))
+#define MTK_NOR_REG_SHIFT_MAX 9
+
+#define MTK_NOR_REG_CFG1 0x60
+#define MTK_NOR_FAST_READ BIT(0)
+
+#define MTK_NOR_REG_CFG2 0x64
+#define MTK_NOR_WR_CUSTOM_OP_EN BIT(4)
+#define MTK_NOR_WR_BUF_EN BIT(0)
+
+#define MTK_NOR_REG_PP_DATA 0x98
+
+#define MTK_NOR_REG_IRQ_STAT 0xa8
+#define MTK_NOR_REG_IRQ_EN 0xac
+#define MTK_NOR_IRQ_DMA BIT(7)
+#define MTK_NOR_IRQ_MASK GENMASK(7, 0)
+
+#define MTK_NOR_REG_CFG3 0xb4
+#define MTK_NOR_DISABLE_WREN BIT(7)
+#define MTK_NOR_DISABLE_SR_POLL BIT(5)
+
+#define MTK_NOR_REG_WP 0xc4
+#define MTK_NOR_ENABLE_SF_CMD 0x30
+
+#define MTK_NOR_REG_BUSCFG 0xcc
+#define MTK_NOR_4B_ADDR BIT(4)
+#define MTK_NOR_QUAD_ADDR BIT(3)
+#define MTK_NOR_QUAD_READ BIT(2)
+#define MTK_NOR_DUAL_ADDR BIT(1)
+#define MTK_NOR_DUAL_READ BIT(0)
+#define MTK_NOR_BUS_MODE_MASK GENMASK(4, 0)
+
+#define MTK_NOR_REG_DMA_CTL 0x718
+#define MTK_NOR_DMA_START BIT(0)
+
+#define MTK_NOR_REG_DMA_FADR 0x71c
+#define MTK_NOR_REG_DMA_DADR 0x720
+#define MTK_NOR_REG_DMA_END_DADR 0x724
+
+#define MTK_NOR_PRG_MAX_SIZE 6
+// Reading DMA src/dst addresses have to be 16-byte aligned
+#define MTK_NOR_DMA_ALIGN 16
+#define MTK_NOR_DMA_ALIGN_MASK (MTK_NOR_DMA_ALIGN - 1)
+// and we allocate a bounce buffer if destination address isn't aligned.
+#define MTK_NOR_BOUNCE_BUF_SIZE PAGE_SIZE
+
+// Buffered page program can do one 128-byte transfer
+#define MTK_NOR_PP_SIZE 128
+
+#define CLK_TO_US(sp, clkcnt) ((clkcnt) * 1000000 / sp->spi_freq)
+
+struct mtk_nor {
+ struct spi_controller *ctlr;
+ struct device *dev;
+ void __iomem *base;
+ u8 *buffer;
+ struct clk *spi_clk;
+ struct clk *ctlr_clk;
+ unsigned int spi_freq;
+ bool wbuf_en;
+ bool has_irq;
+ struct completion op_done;
+};
+
+static inline void mtk_nor_rmw(struct mtk_nor *sp, u32 reg, u32 set, u32 clr)
+{
+ u32 val = readl(sp->base + reg);
+
+ val &= ~clr;
+ val |= set;
+ writel(val, sp->base + reg);
+}
+
+static inline int mtk_nor_cmd_exec(struct mtk_nor *sp, u32 cmd, ulong clk)
+{
+ ulong delay = CLK_TO_US(sp, clk);
+ u32 reg;
+ int ret;
+
+ writel(cmd, sp->base + MTK_NOR_REG_CMD);
+ ret = readl_poll_timeout(sp->base + MTK_NOR_REG_CMD, reg, !(reg & cmd),
+ delay / 3, (delay + 1) * 200);
+ if (ret < 0)
+ dev_err(sp->dev, "command %u timeout.\n", cmd);
+ return ret;
+}
+
+static void mtk_nor_set_addr(struct mtk_nor *sp, const struct spi_mem_op *op)
+{
+ u32 addr = op->addr.val;
+ int i;
+
+ for (i = 0; i < 3; i++) {
+ writeb(addr & 0xff, sp->base + MTK_NOR_REG_RADR(i));
+ addr >>= 8;
+ }
+ if (op->addr.nbytes == 4) {
+ writeb(addr & 0xff, sp->base + MTK_NOR_REG_RADR3);
+ mtk_nor_rmw(sp, MTK_NOR_REG_BUSCFG, MTK_NOR_4B_ADDR, 0);
+ } else {
+ mtk_nor_rmw(sp, MTK_NOR_REG_BUSCFG, 0, MTK_NOR_4B_ADDR);
+ }
+}
+
+static bool mtk_nor_match_read(const struct spi_mem_op *op)
+{
+ int dummy = 0;
+
+ if (op->dummy.buswidth)
+ dummy = op->dummy.nbytes * BITS_PER_BYTE / op->dummy.buswidth;
+
+ if ((op->data.buswidth == 2) || (op->data.buswidth == 4)) {
+ if (op->addr.buswidth == 1)
+ return dummy == 8;
+ else if (op->addr.buswidth == 2)
+ return dummy == 4;
+ else if (op->addr.buswidth == 4)
+ return dummy == 6;
+ } else if ((op->addr.buswidth == 1) && (op->data.buswidth == 1)) {
+ if (op->cmd.opcode == 0x03)
+ return dummy == 0;
+ else if (op->cmd.opcode == 0x0b)
+ return dummy == 8;
+ }
+ return false;
+}
+
+static int mtk_nor_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
+{
+ size_t len;
+
+ if (!op->data.nbytes)
+ return 0;
+
+ if ((op->addr.nbytes == 3) || (op->addr.nbytes == 4)) {
+ if ((op->data.dir == SPI_MEM_DATA_IN) &&
+ mtk_nor_match_read(op)) {
+ if ((op->addr.val & MTK_NOR_DMA_ALIGN_MASK) ||
+ (op->data.nbytes < MTK_NOR_DMA_ALIGN))
+ op->data.nbytes = 1;
+ else if (!((ulong)(op->data.buf.in) &
+ MTK_NOR_DMA_ALIGN_MASK))
+ op->data.nbytes &= ~MTK_NOR_DMA_ALIGN_MASK;
+ else if (op->data.nbytes > MTK_NOR_BOUNCE_BUF_SIZE)
+ op->data.nbytes = MTK_NOR_BOUNCE_BUF_SIZE;
+ return 0;
+ } else if (op->data.dir == SPI_MEM_DATA_OUT) {
+ if (op->data.nbytes >= MTK_NOR_PP_SIZE)
+ op->data.nbytes = MTK_NOR_PP_SIZE;
+ else
+ op->data.nbytes = 1;
+ return 0;
+ }
+ }
+
+ len = MTK_NOR_PRG_MAX_SIZE - sizeof(op->cmd.opcode) - op->addr.nbytes -
+ op->dummy.nbytes;
+ if (op->data.nbytes > len)
+ op->data.nbytes = len;
+
+ return 0;
+}
+
+static bool mtk_nor_supports_op(struct spi_mem *mem,
+ const struct spi_mem_op *op)
+{
+ size_t len;
+
+ if (op->cmd.buswidth != 1)
+ return false;
+
+ if ((op->addr.nbytes == 3) || (op->addr.nbytes == 4)) {
+ if ((op->data.dir == SPI_MEM_DATA_IN) && mtk_nor_match_read(op))
+ return true;
+ else if (op->data.dir == SPI_MEM_DATA_OUT)
+ return (op->addr.buswidth == 1) &&
+ (op->dummy.buswidth == 0) &&
+ (op->data.buswidth == 1);
+ }
+ len = sizeof(op->cmd.opcode) + op->addr.nbytes + op->dummy.nbytes;
+ if ((len > MTK_NOR_PRG_MAX_SIZE) ||
+ ((op->data.nbytes) && (len == MTK_NOR_PRG_MAX_SIZE)))
+ return false;
+ return true;
+}
+
+static void mtk_nor_setup_bus(struct mtk_nor *sp, const struct spi_mem_op *op)
+{
+ u32 reg = 0;
+
+ if (op->addr.nbytes == 4)
+ reg |= MTK_NOR_4B_ADDR;
+
+ if (op->data.buswidth == 4) {
+ reg |= MTK_NOR_QUAD_READ;
+ writeb(op->cmd.opcode, sp->base + MTK_NOR_REG_PRGDATA(4));
+ if (op->addr.buswidth == 4)
+ reg |= MTK_NOR_QUAD_ADDR;
+ } else if (op->data.buswidth == 2) {
+ reg |= MTK_NOR_DUAL_READ;
+ writeb(op->cmd.opcode, sp->base + MTK_NOR_REG_PRGDATA(3));
+ if (op->addr.buswidth == 2)
+ reg |= MTK_NOR_DUAL_ADDR;
+ } else {
+ if (op->cmd.opcode == 0x0b)
+ mtk_nor_rmw(sp, MTK_NOR_REG_CFG1, MTK_NOR_FAST_READ, 0);
+ else
+ mtk_nor_rmw(sp, MTK_NOR_REG_CFG1, 0, MTK_NOR_FAST_READ);
+ }
+ mtk_nor_rmw(sp, MTK_NOR_REG_BUSCFG, reg, MTK_NOR_BUS_MODE_MASK);
+}
+
+static int mtk_nor_read_dma(struct mtk_nor *sp, u32 from, unsigned int length,
+ u8 *buffer)
+{
+ int ret = 0;
+ ulong delay;
+ u32 reg;
+ dma_addr_t dma_addr;
+
+ dma_addr = dma_map_single(sp->dev, buffer, length, DMA_FROM_DEVICE);
+ if (dma_mapping_error(sp->dev, dma_addr)) {
+ dev_err(sp->dev, "failed to map dma buffer.\n");
+ return -EINVAL;
+ }
+
+ writel(from, sp->base + MTK_NOR_REG_DMA_FADR);
+ writel(dma_addr, sp->base + MTK_NOR_REG_DMA_DADR);
+ writel(dma_addr + length, sp->base + MTK_NOR_REG_DMA_END_DADR);
+
+ if (sp->has_irq) {
+ reinit_completion(&sp->op_done);
+ mtk_nor_rmw(sp, MTK_NOR_REG_IRQ_EN, MTK_NOR_IRQ_DMA, 0);
+ }
+
+ mtk_nor_rmw(sp, MTK_NOR_REG_DMA_CTL, MTK_NOR_DMA_START, 0);
+
+ delay = CLK_TO_US(sp, (length + 5) * BITS_PER_BYTE);
+
+ if (sp->has_irq) {
+ if (!wait_for_completion_timeout(&sp->op_done,
+ (delay + 1) * 100))
+ ret = -ETIMEDOUT;
+ } else {
+ ret = readl_poll_timeout(sp->base + MTK_NOR_REG_DMA_CTL, reg,
+ !(reg & MTK_NOR_DMA_START), delay / 3,
+ (delay + 1) * 100);
+ }
+
+ dma_unmap_single(sp->dev, dma_addr, length, DMA_FROM_DEVICE);
+ if (ret < 0)
+ dev_err(sp->dev, "dma read timeout.\n");
+
+ return ret;
+}
+
+static int mtk_nor_read_bounce(struct mtk_nor *sp, u32 from,
+ unsigned int length, u8 *buffer)
+{
+ unsigned int rdlen;
+ int ret;
+
+ if (length & MTK_NOR_DMA_ALIGN_MASK)
+ rdlen = (length + MTK_NOR_DMA_ALIGN) & ~MTK_NOR_DMA_ALIGN_MASK;
+ else
+ rdlen = length;
+
+ ret = mtk_nor_read_dma(sp, from, rdlen, sp->buffer);
+ if (ret)
+ return ret;
+
+ memcpy(buffer, sp->buffer, length);
+ return 0;
+}
+
+static int mtk_nor_read_pio(struct mtk_nor *sp, const struct spi_mem_op *op)
+{
+ u8 *buf = op->data.buf.in;
+ int ret;
+
+ ret = mtk_nor_cmd_exec(sp, MTK_NOR_CMD_READ, 6 * BITS_PER_BYTE);
+ if (!ret)
+ buf[0] = readb(sp->base + MTK_NOR_REG_RDATA);
+ return ret;
+}
+
+static int mtk_nor_write_buffer_enable(struct mtk_nor *sp)
+{
+ int ret;
+ u32 val;
+
+ if (sp->wbuf_en)
+ return 0;
+
+ val = readl(sp->base + MTK_NOR_REG_CFG2);
+ writel(val | MTK_NOR_WR_BUF_EN, sp->base + MTK_NOR_REG_CFG2);
+ ret = readl_poll_timeout(sp->base + MTK_NOR_REG_CFG2, val,
+ val & MTK_NOR_WR_BUF_EN, 0, 10000);
+ if (!ret)
+ sp->wbuf_en = true;
+ return ret;
+}
+
+static int mtk_nor_write_buffer_disable(struct mtk_nor *sp)
+{
+ int ret;
+ u32 val;
+
+ if (!sp->wbuf_en)
+ return 0;
+ val = readl(sp->base + MTK_NOR_REG_CFG2);
+ writel(val & ~MTK_NOR_WR_BUF_EN, sp->base + MTK_NOR_REG_CFG2);
+ ret = readl_poll_timeout(sp->base + MTK_NOR_REG_CFG2, val,
+ !(val & MTK_NOR_WR_BUF_EN), 0, 10000);
+ if (!ret)
+ sp->wbuf_en = false;
+ return ret;
+}
+
+static int mtk_nor_pp_buffered(struct mtk_nor *sp, const struct spi_mem_op *op)
+{
+ const u8 *buf = op->data.buf.out;
+ u32 val;
+ int ret, i;
+
+ ret = mtk_nor_write_buffer_enable(sp);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < op->data.nbytes; i += 4) {
+ val = buf[i + 3] << 24 | buf[i + 2] << 16 | buf[i + 1] << 8 |
+ buf[i];
+ writel(val, sp->base + MTK_NOR_REG_PP_DATA);
+ }
+ return mtk_nor_cmd_exec(sp, MTK_NOR_CMD_WRITE,
+ (op->data.nbytes + 5) * BITS_PER_BYTE);
+}
+
+static int mtk_nor_pp_unbuffered(struct mtk_nor *sp,
+ const struct spi_mem_op *op)
+{
+ const u8 *buf = op->data.buf.out;
+ int ret;
+
+ ret = mtk_nor_write_buffer_disable(sp);
+ if (ret < 0)
+ return ret;
+ writeb(buf[0], sp->base + MTK_NOR_REG_WDATA);
+ return mtk_nor_cmd_exec(sp, MTK_NOR_CMD_WRITE, 6 * BITS_PER_BYTE);
+}
+
+int mtk_nor_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
+{
+ struct mtk_nor *sp = spi_controller_get_devdata(mem->spi->master);
+ int ret;
+
+ if ((op->data.nbytes == 0) ||
+ ((op->addr.nbytes != 3) && (op->addr.nbytes != 4)))
+ return -ENOTSUPP;
+
+ if (op->data.dir == SPI_MEM_DATA_OUT) {
+ mtk_nor_set_addr(sp, op);
+ writeb(op->cmd.opcode, sp->base + MTK_NOR_REG_PRGDATA0);
+ if (op->data.nbytes == MTK_NOR_PP_SIZE)
+ return mtk_nor_pp_buffered(sp, op);
+ return mtk_nor_pp_unbuffered(sp, op);
+ }
+
+ if ((op->data.dir == SPI_MEM_DATA_IN) && mtk_nor_match_read(op)) {
+ ret = mtk_nor_write_buffer_disable(sp);
+ if (ret < 0)
+ return ret;
+ mtk_nor_setup_bus(sp, op);
+ if (op->data.nbytes == 1) {
+ mtk_nor_set_addr(sp, op);
+ return mtk_nor_read_pio(sp, op);
+ } else if (((ulong)(op->data.buf.in) &
+ MTK_NOR_DMA_ALIGN_MASK)) {
+ return mtk_nor_read_bounce(sp, op->addr.val,
+ op->data.nbytes,
+ op->data.buf.in);
+ } else {
+ return mtk_nor_read_dma(sp, op->addr.val,
+ op->data.nbytes,
+ op->data.buf.in);
+ }
+ }
+
+ return -ENOTSUPP;
+}
+
+static int mtk_nor_setup(struct spi_device *spi)
+{
+ struct mtk_nor *sp = spi_controller_get_devdata(spi->master);
+
+ if (spi->max_speed_hz && (spi->max_speed_hz < sp->spi_freq)) {
+ dev_err(&spi->dev, "spi clock should be %u Hz.\n",
+ sp->spi_freq);
+ return -EINVAL;
+ }
+ spi->max_speed_hz = sp->spi_freq;
+
+ return 0;
+}
+
+static int mtk_nor_transfer_one_message(struct spi_controller *master,
+ struct spi_message *m)
+{
+ struct mtk_nor *sp = spi_controller_get_devdata(master);
+ struct spi_transfer *t = NULL;
+ unsigned long trx_len = 0;
+ int stat = 0;
+ int reg_offset = MTK_NOR_REG_PRGDATA_MAX;
+ void __iomem *reg;
+ const u8 *txbuf;
+ u8 *rxbuf;
+ int i;
+
+ list_for_each_entry(t, &m->transfers, transfer_list) {
+ txbuf = t->tx_buf;
+ for (i = 0; i < t->len; i++, reg_offset--) {
+ reg = sp->base + MTK_NOR_REG_PRGDATA(reg_offset);
+ if (txbuf)
+ writeb(txbuf[i], reg);
+ else
+ writeb(0, reg);
+ }
+ trx_len += t->len;
+ }
+
+ writel(trx_len * BITS_PER_BYTE, sp->base + MTK_NOR_REG_PRG_CNT);
+
+ stat = mtk_nor_cmd_exec(sp, MTK_NOR_CMD_PROGRAM,
+ trx_len * BITS_PER_BYTE);
+ if (stat < 0)
+ goto msg_done;
+
+ reg_offset = trx_len - 1;
+ list_for_each_entry(t, &m->transfers, transfer_list) {
+ rxbuf = t->rx_buf;
+ for (i = 0; i < t->len; i++, reg_offset--) {
+ reg = sp->base + MTK_NOR_REG_SHIFT(reg_offset);
+ if (rxbuf)
+ rxbuf[i] = readb(reg);
+ }
+ }
+
+ m->actual_length = trx_len;
+msg_done:
+ m->status = stat;
+ spi_finalize_current_message(master);
+
+ return 0;
+}
+
+static void mtk_nor_disable_clk(struct mtk_nor *sp)
+{
+ clk_disable_unprepare(sp->spi_clk);
+ clk_disable_unprepare(sp->ctlr_clk);
+}
+
+static int mtk_nor_enable_clk(struct mtk_nor *sp)
+{
+ int ret;
+
+ ret = clk_prepare_enable(sp->spi_clk);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(sp->ctlr_clk);
+ if (ret) {
+ clk_disable_unprepare(sp->spi_clk);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mtk_nor_init(struct mtk_nor *sp)
+{
+ int ret;
+
+ ret = mtk_nor_enable_clk(sp);
+ if (ret)
+ return ret;
+
+ sp->spi_freq = clk_get_rate(sp->spi_clk);
+
+ writel(MTK_NOR_ENABLE_SF_CMD, sp->base + MTK_NOR_REG_WP);
+ mtk_nor_rmw(sp, MTK_NOR_REG_CFG2, MTK_NOR_WR_CUSTOM_OP_EN, 0);
+ mtk_nor_rmw(sp, MTK_NOR_REG_CFG3,
+ MTK_NOR_DISABLE_WREN | MTK_NOR_DISABLE_SR_POLL, 0);
+
+ return ret;
+}
+
+static irqreturn_t mtk_nor_irq_handler(int irq, void *data)
+{
+ struct mtk_nor *sp = data;
+ u32 irq_status, irq_enabled;
+
+ irq_status = readl(sp->base + MTK_NOR_REG_IRQ_STAT);
+ irq_enabled = readl(sp->base + MTK_NOR_REG_IRQ_EN);
+ // write status back to clear interrupt
+ writel(irq_status, sp->base + MTK_NOR_REG_IRQ_STAT);
+
+ if (!(irq_status & irq_enabled))
+ return IRQ_NONE;
+
+ if (irq_status & MTK_NOR_IRQ_DMA) {
+ complete(&sp->op_done);
+ writel(0, sp->base + MTK_NOR_REG_IRQ_EN);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static size_t mtk_max_msg_size(struct spi_device *spi)
+{
+ return MTK_NOR_PRG_MAX_SIZE;
+}
+
+static const struct spi_controller_mem_ops mtk_nor_mem_ops = {
+ .adjust_op_size = mtk_nor_adjust_op_size,
+ .supports_op = mtk_nor_supports_op,
+ .exec_op = mtk_nor_exec_op
+};
+
+static const struct of_device_id mtk_nor_match[] = {
+ { .compatible = "mediatek,mt8173-nor" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mtk_nor_match);
+
+static int mtk_nor_probe(struct platform_device *pdev)
+{
+ struct spi_controller *ctlr;
+ struct mtk_nor *sp;
+ void __iomem *base;
+ u8 *buffer;
+ struct clk *spi_clk, *ctlr_clk;
+ int ret, irq;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ spi_clk = devm_clk_get(&pdev->dev, "spi");
+ if (IS_ERR(spi_clk))
+ return PTR_ERR(spi_clk);
+
+ ctlr_clk = devm_clk_get(&pdev->dev, "sf");
+ if (IS_ERR(ctlr_clk))
+ return PTR_ERR(ctlr_clk);
+
+ buffer = devm_kmalloc(&pdev->dev,
+ MTK_NOR_BOUNCE_BUF_SIZE + MTK_NOR_DMA_ALIGN,
+ GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ if ((ulong)buffer & MTK_NOR_DMA_ALIGN_MASK)
+ buffer = (u8 *)(((ulong)buffer + MTK_NOR_DMA_ALIGN) &
+ ~MTK_NOR_DMA_ALIGN_MASK);
+
+ ctlr = spi_alloc_master(&pdev->dev, sizeof(*sp));
+ if (!ctlr) {
+ dev_err(&pdev->dev, "failed to allocate spi controller\n");
+ return -ENOMEM;
+ }
+
+ ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
+ ctlr->dev.of_node = pdev->dev.of_node;
+ ctlr->max_message_size = mtk_max_msg_size;
+ ctlr->mem_ops = &mtk_nor_mem_ops;
+ ctlr->mode_bits = SPI_RX_DUAL | SPI_RX_QUAD | SPI_TX_DUAL | SPI_TX_QUAD;
+ ctlr->num_chipselect = 1;
+ ctlr->setup = mtk_nor_setup;
+ ctlr->transfer_one_message = mtk_nor_transfer_one_message;
+
+ dev_set_drvdata(&pdev->dev, ctlr);
+
+ sp = spi_controller_get_devdata(ctlr);
+ sp->base = base;
+ sp->buffer = buffer;
+ sp->has_irq = false;
+ sp->wbuf_en = false;
+ sp->ctlr = ctlr;
+ sp->dev = &pdev->dev;
+ sp->spi_clk = spi_clk;
+ sp->ctlr_clk = ctlr_clk;
+
+ irq = platform_get_irq_optional(pdev, 0);
+ if (irq < 0) {
+ dev_warn(sp->dev, "IRQ not available.");
+ } else {
+ writel(MTK_NOR_IRQ_MASK, base + MTK_NOR_REG_IRQ_STAT);
+ writel(0, base + MTK_NOR_REG_IRQ_EN);
+ ret = devm_request_irq(sp->dev, irq, mtk_nor_irq_handler, 0,
+ pdev->name, sp);
+ if (ret < 0) {
+ dev_warn(sp->dev, "failed to request IRQ.");
+ } else {
+ init_completion(&sp->op_done);
+ sp->has_irq = true;
+ }
+ }
+
+ ret = mtk_nor_init(sp);
+ if (ret < 0) {
+ kfree(ctlr);
+ return ret;
+ }
+
+ dev_info(&pdev->dev, "spi frequency: %d Hz\n", sp->spi_freq);
+
+ return devm_spi_register_controller(&pdev->dev, ctlr);
+}
+
+static int mtk_nor_remove(struct platform_device *pdev)
+{
+ struct spi_controller *ctlr;
+ struct mtk_nor *sp;
+
+ ctlr = dev_get_drvdata(&pdev->dev);
+ sp = spi_controller_get_devdata(ctlr);
+
+ mtk_nor_disable_clk(sp);
+
+ return 0;
+}
+
+static struct platform_driver mtk_nor_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = mtk_nor_match,
+ },
+ .probe = mtk_nor_probe,
+ .remove = mtk_nor_remove,
+};
+
+module_platform_driver(mtk_nor_driver);
+
+MODULE_DESCRIPTION("Mediatek SPI NOR controller driver");
+MODULE_AUTHOR("Chuanhong Guo <gch981213@gmail.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
spi->mode |= SPI_CS_HIGH;
/* Device speed */
- rc = of_property_read_u32(nc, "spi-max-frequency", &value);
- if (rc) {
- dev_err(&ctlr->dev,
- "%pOF has no valid 'spi-max-frequency' property (%d)\n", nc, rc);
- return rc;
- }
- spi->max_speed_hz = value;
+ if (!of_property_read_u32(nc, "spi-max-frequency", &value))
+ spi->max_speed_hz = value;
return 0;
}
#include <linux/mtd/mtd.h>
#include <linux/spi/spi-mem.h>
-/*
- * Manufacturer IDs
- *
- * The first byte returned from the flash after sending opcode SPINOR_OP_RDID.
- * Sometimes these are the same as CFI IDs, but sometimes they aren't.
- */
-#define SNOR_MFR_ATMEL CFI_MFR_ATMEL
-#define SNOR_MFR_GIGADEVICE 0xc8
-#define SNOR_MFR_INTEL CFI_MFR_INTEL
-#define SNOR_MFR_ST CFI_MFR_ST /* ST Micro */
-#define SNOR_MFR_MICRON CFI_MFR_MICRON /* Micron */
-#define SNOR_MFR_ISSI CFI_MFR_PMC
-#define SNOR_MFR_MACRONIX CFI_MFR_MACRONIX
-#define SNOR_MFR_SPANSION CFI_MFR_AMD
-#define SNOR_MFR_SST CFI_MFR_SST
-#define SNOR_MFR_WINBOND 0xef /* Also used by some Spansion */
-
/*
* Note on opcode nomenclature: some opcodes have a format like
* SPINOR_OP_FUNCTION{4,}_x_y_z. The numbers x, y, and z stand for the number
#define SR_BP0 BIT(2) /* Block protect 0 */
#define SR_BP1 BIT(3) /* Block protect 1 */
#define SR_BP2 BIT(4) /* Block protect 2 */
+#define SR_BP3 BIT(5) /* Block protect 3 */
#define SR_TB_BIT5 BIT(5) /* Top/Bottom protect */
+#define SR_BP3_BIT6 BIT(6) /* Block protect 3 */
#define SR_TB_BIT6 BIT(6) /* Top/Bottom protect */
#define SR_SRWD BIT(7) /* SR write protect */
/* Spansion/Cypress specific status bits */
#define SR1_QUAD_EN_BIT6 BIT(6)
+#define SR_BP_SHIFT 2
+
/* Enhanced Volatile Configuration Register bits */
#define EVCR_QUAD_EN_MICRON BIT(7) /* Micron Quad I/O */
return spi_nor_get_protocol_data_nbits(proto);
}
-enum spi_nor_option_flags {
- SNOR_F_USE_FSR = BIT(0),
- SNOR_F_HAS_SR_TB = BIT(1),
- SNOR_F_NO_OP_CHIP_ERASE = BIT(2),
- SNOR_F_READY_XSR_RDY = BIT(3),
- SNOR_F_USE_CLSR = BIT(4),
- SNOR_F_BROKEN_RESET = BIT(5),
- SNOR_F_4B_OPCODES = BIT(6),
- SNOR_F_HAS_4BAIT = BIT(7),
- SNOR_F_HAS_LOCK = BIT(8),
- SNOR_F_HAS_16BIT_SR = BIT(9),
- SNOR_F_NO_READ_CR = BIT(10),
- SNOR_F_HAS_SR_TB_BIT6 = BIT(11),
-
-};
-
-/**
- * struct spi_nor_erase_type - Structure to describe a SPI NOR erase type
- * @size: the size of the sector/block erased by the erase type.
- * JEDEC JESD216B imposes erase sizes to be a power of 2.
- * @size_shift: @size is a power of 2, the shift is stored in
- * @size_shift.
- * @size_mask: the size mask based on @size_shift.
- * @opcode: the SPI command op code to erase the sector/block.
- * @idx: Erase Type index as sorted in the Basic Flash Parameter
- * Table. It will be used to synchronize the supported
- * Erase Types with the ones identified in the SFDP
- * optional tables.
- */
-struct spi_nor_erase_type {
- u32 size;
- u32 size_shift;
- u32 size_mask;
- u8 opcode;
- u8 idx;
-};
-
-/**
- * struct spi_nor_erase_command - Used for non-uniform erases
- * The structure is used to describe a list of erase commands to be executed
- * once we validate that the erase can be performed. The elements in the list
- * are run-length encoded.
- * @list: for inclusion into the list of erase commands.
- * @count: how many times the same erase command should be
- * consecutively used.
- * @size: the size of the sector/block erased by the command.
- * @opcode: the SPI command op code to erase the sector/block.
- */
-struct spi_nor_erase_command {
- struct list_head list;
- u32 count;
- u32 size;
- u8 opcode;
-};
-
-/**
- * struct spi_nor_erase_region - Structure to describe a SPI NOR erase region
- * @offset: the offset in the data array of erase region start.
- * LSB bits are used as a bitmask encoding flags to
- * determine if this region is overlaid, if this region is
- * the last in the SPI NOR flash memory and to indicate
- * all the supported erase commands inside this region.
- * The erase types are sorted in ascending order with the
- * smallest Erase Type size being at BIT(0).
- * @size: the size of the region in bytes.
- */
-struct spi_nor_erase_region {
- u64 offset;
- u64 size;
-};
-
-#define SNOR_ERASE_TYPE_MAX 4
-#define SNOR_ERASE_TYPE_MASK GENMASK_ULL(SNOR_ERASE_TYPE_MAX - 1, 0)
-
-#define SNOR_LAST_REGION BIT(4)
-#define SNOR_OVERLAID_REGION BIT(5)
-
-#define SNOR_ERASE_FLAGS_MAX 6
-#define SNOR_ERASE_FLAGS_MASK GENMASK_ULL(SNOR_ERASE_FLAGS_MAX - 1, 0)
-
-/**
- * struct spi_nor_erase_map - Structure to describe the SPI NOR erase map
- * @regions: array of erase regions. The regions are consecutive in
- * address space. Walking through the regions is done
- * incrementally.
- * @uniform_region: a pre-allocated erase region for SPI NOR with a uniform
- * sector size (legacy implementation).
- * @erase_type: an array of erase types shared by all the regions.
- * The erase types are sorted in ascending order, with the
- * smallest Erase Type size being the first member in the
- * erase_type array.
- * @uniform_erase_type: bitmask encoding erase types that can erase the
- * entire memory. This member is completed at init by
- * uniform and non-uniform SPI NOR flash memories if they
- * support at least one erase type that can erase the
- * entire memory.
- */
-struct spi_nor_erase_map {
- struct spi_nor_erase_region *regions;
- struct spi_nor_erase_region uniform_region;
- struct spi_nor_erase_type erase_type[SNOR_ERASE_TYPE_MAX];
- u8 uniform_erase_type;
-};
-
/**
* struct spi_nor_hwcaps - Structure for describing the hardware capabilies
* supported by the SPI controller (bus master).
#define SNOR_HWCAPS_ALL (SNOR_HWCAPS_READ_MASK | \
SNOR_HWCAPS_PP_MASK)
-struct spi_nor_read_command {
- u8 num_mode_clocks;
- u8 num_wait_states;
- u8 opcode;
- enum spi_nor_protocol proto;
-};
-
-struct spi_nor_pp_command {
- u8 opcode;
- enum spi_nor_protocol proto;
-};
-
-enum spi_nor_read_command_index {
- SNOR_CMD_READ,
- SNOR_CMD_READ_FAST,
- SNOR_CMD_READ_1_1_1_DTR,
-
- /* Dual SPI */
- SNOR_CMD_READ_1_1_2,
- SNOR_CMD_READ_1_2_2,
- SNOR_CMD_READ_2_2_2,
- SNOR_CMD_READ_1_2_2_DTR,
-
- /* Quad SPI */
- SNOR_CMD_READ_1_1_4,
- SNOR_CMD_READ_1_4_4,
- SNOR_CMD_READ_4_4_4,
- SNOR_CMD_READ_1_4_4_DTR,
-
- /* Octal SPI */
- SNOR_CMD_READ_1_1_8,
- SNOR_CMD_READ_1_8_8,
- SNOR_CMD_READ_8_8_8,
- SNOR_CMD_READ_1_8_8_DTR,
-
- SNOR_CMD_READ_MAX
-};
-
-enum spi_nor_pp_command_index {
- SNOR_CMD_PP,
-
- /* Quad SPI */
- SNOR_CMD_PP_1_1_4,
- SNOR_CMD_PP_1_4_4,
- SNOR_CMD_PP_4_4_4,
-
- /* Octal SPI */
- SNOR_CMD_PP_1_1_8,
- SNOR_CMD_PP_1_8_8,
- SNOR_CMD_PP_8_8_8,
-
- SNOR_CMD_PP_MAX
-};
-
-/* Forward declaration that will be used in 'struct spi_nor_flash_parameter' */
+/* Forward declaration that is used in 'struct spi_nor_controller_ops' */
struct spi_nor;
/**
int (*erase)(struct spi_nor *nor, loff_t offs);
};
-/**
- * struct spi_nor_locking_ops - SPI NOR locking methods
- * @lock: lock a region of the SPI NOR.
- * @unlock: unlock a region of the SPI NOR.
- * @is_locked: check if a region of the SPI NOR is completely locked
- */
-struct spi_nor_locking_ops {
- int (*lock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
- int (*unlock)(struct spi_nor *nor, loff_t ofs, uint64_t len);
- int (*is_locked)(struct spi_nor *nor, loff_t ofs, uint64_t len);
-};
-
-/**
- * struct spi_nor_flash_parameter - SPI NOR flash parameters and settings.
- * Includes legacy flash parameters and settings that can be overwritten
- * by the spi_nor_fixups hooks, or dynamically when parsing the JESD216
- * Serial Flash Discoverable Parameters (SFDP) tables.
- *
- * @size: the flash memory density in bytes.
- * @page_size: the page size of the SPI NOR flash memory.
- * @hwcaps: describes the read and page program hardware
- * capabilities.
- * @reads: read capabilities ordered by priority: the higher index
- * in the array, the higher priority.
- * @page_programs: page program capabilities ordered by priority: the
- * higher index in the array, the higher priority.
- * @erase_map: the erase map parsed from the SFDP Sector Map Parameter
- * Table.
- * @quad_enable: enables SPI NOR quad mode.
- * @set_4byte: puts the SPI NOR in 4 byte addressing mode.
- * @convert_addr: converts an absolute address into something the flash
- * will understand. Particularly useful when pagesize is
- * not a power-of-2.
- * @setup: configures the SPI NOR memory. Useful for SPI NOR
- * flashes that have peculiarities to the SPI NOR standard
- * e.g. different opcodes, specific address calculation,
- * page size, etc.
- * @locking_ops: SPI NOR locking methods.
- */
-struct spi_nor_flash_parameter {
- u64 size;
- u32 page_size;
-
- struct spi_nor_hwcaps hwcaps;
- struct spi_nor_read_command reads[SNOR_CMD_READ_MAX];
- struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX];
-
- struct spi_nor_erase_map erase_map;
-
- int (*quad_enable)(struct spi_nor *nor);
- int (*set_4byte)(struct spi_nor *nor, bool enable);
- u32 (*convert_addr)(struct spi_nor *nor, u32 addr);
- int (*setup)(struct spi_nor *nor, const struct spi_nor_hwcaps *hwcaps);
-
- const struct spi_nor_locking_ops *locking_ops;
-};
-
-/**
- * struct flash_info - Forward declaration of a structure used internally by
- * spi_nor_scan()
+/*
+ * Forward declarations that are used internally by the core and manufacturer
+ * drivers.
*/
struct flash_info;
+struct spi_nor_manufacturer;
+struct spi_nor_flash_parameter;
/**
* struct spi_nor - Structure for defining a the SPI NOR layer
* layer is not DMA-able
* @bouncebuf_size: size of the bounce buffer
* @info: spi-nor part JDEC MFR id and other info
+ * @manufacturer: spi-nor manufacturer
* @page_size: the page size of the SPI NOR
* @addr_width: number of address bytes
* @erase_opcode: the opcode for erasing a sector
* The structure includes legacy flash parameters and
* settings that can be overwritten by the spi_nor_fixups
* hooks, or dynamically when parsing the SFDP tables.
+ * @dirmap: pointers to struct spi_mem_dirmap_desc for reads/writes.
* @priv: the private data
*/
struct spi_nor {
u8 *bouncebuf;
size_t bouncebuf_size;
const struct flash_info *info;
+ const struct spi_nor_manufacturer *manufacturer;
u32 page_size;
u8 addr_width;
u8 erase_opcode;
const struct spi_nor_controller_ops *controller_ops;
- struct spi_nor_flash_parameter params;
+ struct spi_nor_flash_parameter *params;
+
+ struct {
+ struct spi_mem_dirmap_desc *rdesc;
+ struct spi_mem_dirmap_desc *wdesc;
+ } dirmap;
void *priv;
};
-static u64 __maybe_unused
-spi_nor_region_is_last(const struct spi_nor_erase_region *region)
-{
- return region->offset & SNOR_LAST_REGION;
-}
-
-static u64 __maybe_unused
-spi_nor_region_end(const struct spi_nor_erase_region *region)
-{
- return (region->offset & ~SNOR_ERASE_FLAGS_MASK) + region->size;
-}
-
-static void __maybe_unused
-spi_nor_region_mark_end(struct spi_nor_erase_region *region)
-{
- region->offset |= SNOR_LAST_REGION;
-}
-
-static void __maybe_unused
-spi_nor_region_mark_overlay(struct spi_nor_erase_region *region)
-{
- region->offset |= SNOR_OVERLAID_REGION;
-}
-
-static bool __maybe_unused spi_nor_has_uniform_erase(const struct spi_nor *nor)
-{
- return !!nor->params.erase_map.uniform_erase_type;
-}
-
static inline void spi_nor_set_flash_node(struct spi_nor *nor,
struct device_node *np)
{
projects / linux-block.git / commitdiff