KVM: PPC: Book3S HV: Restructure kvmppc_hv_entry to be a subroutine
authorPaul Mackerras <paulus@samba.org>
Fri, 6 Sep 2013 03:23:44 +0000 (13:23 +1000)
committerAlexander Graf <agraf@suse.de>
Thu, 17 Oct 2013 12:45:00 +0000 (14:45 +0200)
We have two paths into and out of the low-level guest entry and exit
code: from a vcpu task via kvmppc_hv_entry_trampoline, and from the
system reset vector for an offline secondary thread on POWER7 via
kvm_start_guest.  Currently both just branch to kvmppc_hv_entry to
enter the guest, and on guest exit, we test the vcpu physical thread
ID to detect which way we came in and thus whether we should return
to the vcpu task or go back to nap mode.

In order to make the code flow clearer, and to keep the code relating
to each flow together, this turns kvmppc_hv_entry into a subroutine
that follows the normal conventions for call and return.  This means
that kvmppc_hv_entry_trampoline() and kvmppc_hv_entry() now establish
normal stack frames, and we use the normal stack slots for saving
return addresses rather than local_paca->kvm_hstate.vmhandler.  Apart
from that this is mostly moving code around unchanged.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
arch/powerpc/kvm/book3s_hv_rmhandlers.S

index 82b06dfe2d274e9fc6456cfee4900c9d1895a1d7..2bf295102f6a3ab5d67d268cd6279f210665ef8d 100644 (file)
@@ -66,8 +66,11 @@ kvmppc_skip_Hinterrupt:
  * LR = return address to continue at after eventually re-enabling MMU
  */
 _GLOBAL(kvmppc_hv_entry_trampoline)
+       mflr    r0
+       std     r0, PPC_LR_STKOFF(r1)
+       stdu    r1, -112(r1)
        mfmsr   r10
-       LOAD_REG_ADDR(r5, kvmppc_hv_entry)
+       LOAD_REG_ADDR(r5, kvmppc_call_hv_entry)
        li      r0,MSR_RI
        andc    r0,r10,r0
        li      r6,MSR_IR | MSR_DR
@@ -77,11 +80,103 @@ _GLOBAL(kvmppc_hv_entry_trampoline)
        mtsrr1  r6
        RFI
 
-/******************************************************************************
- *                                                                            *
- *                               Entry code                                   *
- *                                                                            *
- *****************************************************************************/
+kvmppc_call_hv_entry:
+       bl      kvmppc_hv_entry
+
+       /* Back from guest - restore host state and return to caller */
+
+       /* Restore host DABR and DABRX */
+       ld      r5,HSTATE_DABR(r13)
+       li      r6,7
+       mtspr   SPRN_DABR,r5
+       mtspr   SPRN_DABRX,r6
+
+       /* Restore SPRG3 */
+       ld      r3,PACA_SPRG3(r13)
+       mtspr   SPRN_SPRG3,r3
+
+       /*
+        * Reload DEC.  HDEC interrupts were disabled when
+        * we reloaded the host's LPCR value.
+        */
+       ld      r3, HSTATE_DECEXP(r13)
+       mftb    r4
+       subf    r4, r4, r3
+       mtspr   SPRN_DEC, r4
+
+       /* Reload the host's PMU registers */
+       ld      r3, PACALPPACAPTR(r13)  /* is the host using the PMU? */
+       lbz     r4, LPPACA_PMCINUSE(r3)
+       cmpwi   r4, 0
+       beq     23f                     /* skip if not */
+       lwz     r3, HSTATE_PMC(r13)
+       lwz     r4, HSTATE_PMC + 4(r13)
+       lwz     r5, HSTATE_PMC + 8(r13)
+       lwz     r6, HSTATE_PMC + 12(r13)
+       lwz     r8, HSTATE_PMC + 16(r13)
+       lwz     r9, HSTATE_PMC + 20(r13)
+BEGIN_FTR_SECTION
+       lwz     r10, HSTATE_PMC + 24(r13)
+       lwz     r11, HSTATE_PMC + 28(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
+       mtspr   SPRN_PMC1, r3
+       mtspr   SPRN_PMC2, r4
+       mtspr   SPRN_PMC3, r5
+       mtspr   SPRN_PMC4, r6
+       mtspr   SPRN_PMC5, r8
+       mtspr   SPRN_PMC6, r9
+BEGIN_FTR_SECTION
+       mtspr   SPRN_PMC7, r10
+       mtspr   SPRN_PMC8, r11
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
+       ld      r3, HSTATE_MMCR(r13)
+       ld      r4, HSTATE_MMCR + 8(r13)
+       ld      r5, HSTATE_MMCR + 16(r13)
+       mtspr   SPRN_MMCR1, r4
+       mtspr   SPRN_MMCRA, r5
+       mtspr   SPRN_MMCR0, r3
+       isync
+23:
+
+       /*
+        * For external and machine check interrupts, we need
+        * to call the Linux handler to process the interrupt.
+        * We do that by jumping to absolute address 0x500 for
+        * external interrupts, or the machine_check_fwnmi label
+        * for machine checks (since firmware might have patched
+        * the vector area at 0x200).  The [h]rfid at the end of the
+        * handler will return to the book3s_hv_interrupts.S code.
+        * For other interrupts we do the rfid to get back
+        * to the book3s_hv_interrupts.S code here.
+        */
+       ld      r8, 112+PPC_LR_STKOFF(r1)
+       addi    r1, r1, 112
+       ld      r7, HSTATE_HOST_MSR(r13)
+
+       cmpwi   cr1, r12, BOOK3S_INTERRUPT_MACHINE_CHECK
+       cmpwi   r12, BOOK3S_INTERRUPT_EXTERNAL
+BEGIN_FTR_SECTION
+       beq     11f
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
+
+       /* RFI into the highmem handler, or branch to interrupt handler */
+       mfmsr   r6
+       li      r0, MSR_RI
+       andc    r6, r6, r0
+       mtmsrd  r6, 1                   /* Clear RI in MSR */
+       mtsrr0  r8
+       mtsrr1  r7
+       beqa    0x500                   /* external interrupt (PPC970) */
+       beq     cr1, 13f                /* machine check */
+       RFI
+
+       /* On POWER7, we have external interrupts set to use HSRR0/1 */
+11:    mtspr   SPRN_HSRR0, r8
+       mtspr   SPRN_HSRR1, r7
+       ba      0x500
+
+13:    b       machine_check_fwnmi
+
 
 /*
  * We come in here when wakened from nap mode on a secondary hw thread.
@@ -137,7 +232,7 @@ kvm_start_guest:
        cmpdi   r4,0
        /* if we have no vcpu to run, go back to sleep */
        beq     kvm_no_guest
-       b       kvmppc_hv_entry
+       b       30f
 
 27:    /* XXX should handle hypervisor maintenance interrupts etc. here */
        b       kvm_no_guest
@@ -147,6 +242,57 @@ kvm_start_guest:
        stw     r8,HSTATE_SAVED_XIRR(r13)
        b       kvm_no_guest
 
+30:    bl      kvmppc_hv_entry
+
+       /* Back from the guest, go back to nap */
+       /* Clear our vcpu pointer so we don't come back in early */
+       li      r0, 0
+       std     r0, HSTATE_KVM_VCPU(r13)
+       lwsync
+       /* Clear any pending IPI - we're an offline thread */
+       ld      r5, HSTATE_XICS_PHYS(r13)
+       li      r7, XICS_XIRR
+       lwzcix  r3, r5, r7              /* ack any pending interrupt */
+       rlwinm. r0, r3, 0, 0xffffff     /* any pending? */
+       beq     37f
+       sync
+       li      r0, 0xff
+       li      r6, XICS_MFRR
+       stbcix  r0, r5, r6              /* clear the IPI */
+       stwcix  r3, r5, r7              /* EOI it */
+37:    sync
+
+       /* increment the nap count and then go to nap mode */
+       ld      r4, HSTATE_KVM_VCORE(r13)
+       addi    r4, r4, VCORE_NAP_COUNT
+       lwsync                          /* make previous updates visible */
+51:    lwarx   r3, 0, r4
+       addi    r3, r3, 1
+       stwcx.  r3, 0, r4
+       bne     51b
+
+kvm_no_guest:
+       li      r0, KVM_HWTHREAD_IN_NAP
+       stb     r0, HSTATE_HWTHREAD_STATE(r13)
+       li      r3, LPCR_PECE0
+       mfspr   r4, SPRN_LPCR
+       rlwimi  r4, r3, 0, LPCR_PECE0 | LPCR_PECE1
+       mtspr   SPRN_LPCR, r4
+       isync
+       std     r0, HSTATE_SCRATCH0(r13)
+       ptesync
+       ld      r0, HSTATE_SCRATCH0(r13)
+1:     cmpd    r0, r0
+       bne     1b
+       nap
+       b       .
+
+/******************************************************************************
+ *                                                                            *
+ *                               Entry code                                   *
+ *                                                                            *
+ *****************************************************************************/
+
 .global kvmppc_hv_entry
 kvmppc_hv_entry:
 
@@ -159,7 +305,8 @@ kvmppc_hv_entry:
         * all other volatile GPRS = free
         */
        mflr    r0
-       std     r0, HSTATE_VMHANDLER(r13)
+       std     r0, PPC_LR_STKOFF(r1)
+       stdu    r1, -112(r1)
 
        /* Set partition DABR */
        /* Do this before re-enabling PMU to avoid P7 DABR corruption bug */
@@ -1198,103 +1345,30 @@ BEGIN_FTR_SECTION
        stw     r11, VCPU_PMC + 28(r9)
 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
 22:
+       ld      r0, 112+PPC_LR_STKOFF(r1)
+       addi    r1, r1, 112
+       mtlr    r0
+       blr
+secondary_too_late:
+       ld      r5,HSTATE_KVM_VCORE(r13)
+       HMT_LOW
+13:    lbz     r3,VCORE_IN_GUEST(r5)
+       cmpwi   r3,0
+       bne     13b
+       HMT_MEDIUM
+       li      r0, KVM_GUEST_MODE_NONE
+       stb     r0, HSTATE_IN_GUEST(r13)
+       ld      r11,PACA_SLBSHADOWPTR(r13)
 
-       /* Secondary threads go off to take a nap on POWER7 */
-BEGIN_FTR_SECTION
-       lwz     r0,VCPU_PTID(r9)
-       cmpwi   r0,0
-       bne     secondary_nap
-END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
-
-       /* Restore host DABR and DABRX */
-       ld      r5,HSTATE_DABR(r13)
-       li      r6,7
-       mtspr   SPRN_DABR,r5
-       mtspr   SPRN_DABRX,r6
-
-       /* Restore SPRG3 */
-       ld      r3,PACA_SPRG3(r13)
-       mtspr   SPRN_SPRG3,r3
-
-       /*
-        * Reload DEC.  HDEC interrupts were disabled when
-        * we reloaded the host's LPCR value.
-        */
-       ld      r3, HSTATE_DECEXP(r13)
-       mftb    r4
-       subf    r4, r4, r3
-       mtspr   SPRN_DEC, r4
-
-       /* Reload the host's PMU registers */
-       ld      r3, PACALPPACAPTR(r13)  /* is the host using the PMU? */
-       lbz     r4, LPPACA_PMCINUSE(r3)
-       cmpwi   r4, 0
-       beq     23f                     /* skip if not */
-       lwz     r3, HSTATE_PMC(r13)
-       lwz     r4, HSTATE_PMC + 4(r13)
-       lwz     r5, HSTATE_PMC + 8(r13)
-       lwz     r6, HSTATE_PMC + 12(r13)
-       lwz     r8, HSTATE_PMC + 16(r13)
-       lwz     r9, HSTATE_PMC + 20(r13)
-BEGIN_FTR_SECTION
-       lwz     r10, HSTATE_PMC + 24(r13)
-       lwz     r11, HSTATE_PMC + 28(r13)
-END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
-       mtspr   SPRN_PMC1, r3
-       mtspr   SPRN_PMC2, r4
-       mtspr   SPRN_PMC3, r5
-       mtspr   SPRN_PMC4, r6
-       mtspr   SPRN_PMC5, r8
-       mtspr   SPRN_PMC6, r9
-BEGIN_FTR_SECTION
-       mtspr   SPRN_PMC7, r10
-       mtspr   SPRN_PMC8, r11
-END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
-       ld      r3, HSTATE_MMCR(r13)
-       ld      r4, HSTATE_MMCR + 8(r13)
-       ld      r5, HSTATE_MMCR + 16(r13)
-       mtspr   SPRN_MMCR1, r4
-       mtspr   SPRN_MMCRA, r5
-       mtspr   SPRN_MMCR0, r3
-       isync
-23:
-       /*
-        * For external and machine check interrupts, we need
-        * to call the Linux handler to process the interrupt.
-        * We do that by jumping to absolute address 0x500 for
-        * external interrupts, or the machine_check_fwnmi label
-        * for machine checks (since firmware might have patched
-        * the vector area at 0x200).  The [h]rfid at the end of the
-        * handler will return to the book3s_hv_interrupts.S code.
-        * For other interrupts we do the rfid to get back
-        * to the book3s_hv_interrupts.S code here.
-        */
-       ld      r8, HSTATE_VMHANDLER(r13)
-       ld      r7, HSTATE_HOST_MSR(r13)
-
-       cmpwi   cr1, r12, BOOK3S_INTERRUPT_MACHINE_CHECK
-       cmpwi   r12, BOOK3S_INTERRUPT_EXTERNAL
-BEGIN_FTR_SECTION
-       beq     11f
-END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
-
-       /* RFI into the highmem handler, or branch to interrupt handler */
-       mfmsr   r6
-       li      r0, MSR_RI
-       andc    r6, r6, r0
-       mtmsrd  r6, 1                   /* Clear RI in MSR */
-       mtsrr0  r8
-       mtsrr1  r7
-       beqa    0x500                   /* external interrupt (PPC970) */
-       beq     cr1, 13f                /* machine check */
-       RFI
-
-       /* On POWER7, we have external interrupts set to use HSRR0/1 */
-11:    mtspr   SPRN_HSRR0, r8
-       mtspr   SPRN_HSRR1, r7
-       ba      0x500
-
-13:    b       machine_check_fwnmi
+       .rept   SLB_NUM_BOLTED
+       ld      r5,SLBSHADOW_SAVEAREA(r11)
+       ld      r6,SLBSHADOW_SAVEAREA+8(r11)
+       andis.  r7,r5,SLB_ESID_V@h
+       beq     1f
+       slbmte  r6,r5
+1:     addi    r11,r11,16
+       .endr
+       b       22b
 
 /*
  * Check whether an HDSI is an HPTE not found fault or something else.
@@ -1741,68 +1815,6 @@ machine_check_realmode:
        rotldi  r11, r11, 63
        b       fast_interrupt_c_return
 
-secondary_too_late:
-       ld      r5,HSTATE_KVM_VCORE(r13)
-       HMT_LOW
-13:    lbz     r3,VCORE_IN_GUEST(r5)
-       cmpwi   r3,0
-       bne     13b
-       HMT_MEDIUM
-       ld      r11,PACA_SLBSHADOWPTR(r13)
-
-       .rept   SLB_NUM_BOLTED
-       ld      r5,SLBSHADOW_SAVEAREA(r11)
-       ld      r6,SLBSHADOW_SAVEAREA+8(r11)
-       andis.  r7,r5,SLB_ESID_V@h
-       beq     1f
-       slbmte  r6,r5
-1:     addi    r11,r11,16
-       .endr
-
-secondary_nap:
-       /* Clear our vcpu pointer so we don't come back in early */
-       li      r0, 0
-       std     r0, HSTATE_KVM_VCPU(r13)
-       lwsync
-       /* Clear any pending IPI - assume we're a secondary thread */
-       ld      r5, HSTATE_XICS_PHYS(r13)
-       li      r7, XICS_XIRR
-       lwzcix  r3, r5, r7              /* ack any pending interrupt */
-       rlwinm. r0, r3, 0, 0xffffff     /* any pending? */
-       beq     37f
-       sync
-       li      r0, 0xff
-       li      r6, XICS_MFRR
-       stbcix  r0, r5, r6              /* clear the IPI */
-       stwcix  r3, r5, r7              /* EOI it */
-37:    sync
-
-       /* increment the nap count and then go to nap mode */
-       ld      r4, HSTATE_KVM_VCORE(r13)
-       addi    r4, r4, VCORE_NAP_COUNT
-       lwsync                          /* make previous updates visible */
-51:    lwarx   r3, 0, r4
-       addi    r3, r3, 1
-       stwcx.  r3, 0, r4
-       bne     51b
-
-kvm_no_guest:
-       li      r0, KVM_HWTHREAD_IN_NAP
-       stb     r0, HSTATE_HWTHREAD_STATE(r13)
-
-       li      r3, LPCR_PECE0
-       mfspr   r4, SPRN_LPCR
-       rlwimi  r4, r3, 0, LPCR_PECE0 | LPCR_PECE1
-       mtspr   SPRN_LPCR, r4
-       isync
-       std     r0, HSTATE_SCRATCH0(r13)
-       ptesync
-       ld      r0, HSTATE_SCRATCH0(r13)
-1:     cmpd    r0, r0
-       bne     1b
-       nap
-       b       .
-
 /*
  * Save away FP, VMX and VSX registers.
  * r3 = vcpu pointer