dt-bindings: stm32-dwmac: add support of MPU families
authorChristophe Roullier <christophe.roullier@st.com>
Fri, 25 May 2018 07:46:39 +0000 (09:46 +0200)
committerDavid S. Miller <davem@davemloft.net>
Tue, 29 May 2018 03:08:29 +0000 (23:08 -0400)
Add description for Ethernet MPU families fields

Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Documentation/devicetree/bindings/net/stm32-dwmac.txt

index 489dbcb66c5a273df0d444dee4f0a3a280bf8f83..1341012722aa3b5f6ec1676a7c4950219ddaf9a6 100644 (file)
@@ -6,14 +6,28 @@ Please see stmmac.txt for the other unchanged properties.
 The device node has following properties.
 
 Required properties:
-- compatible:  Should be "st,stm32-dwmac" to select glue, and
+- compatible:  For MCU family should be "st,stm32-dwmac" to select glue, and
               "snps,dwmac-3.50a" to select IP version.
+              For MPU family should be "st,stm32mp1-dwmac" to select
+              glue, and "snps,dwmac-4.20a" to select IP version.
 - clocks: Must contain a phandle for each entry in clock-names.
 - clock-names: Should be "stmmaceth" for the host clock.
               Should be "mac-clk-tx" for the MAC TX clock.
               Should be "mac-clk-rx" for the MAC RX clock.
+              For MPU family need to add also "ethstp" for power mode clock and,
+                                              "syscfg-clk" for SYSCFG clock.
+- interrupt-names: Should contain a list of interrupt names corresponding to
+           the interrupts in the interrupts property, if available.
+                  Should be "macirq" for the main MAC IRQ
+                  Should be "eth_wake_irq" for the IT which wake up system
 - st,syscon : Should be phandle/offset pair. The phandle to the syscon node which
-             encompases the glue register, and the offset of the control register.
+              encompases the glue register, and the offset of the control register.
+
+Optional properties:
+- clock-names:     For MPU family "mac-clk-ck" for PHY without quartz
+- st,int-phyclk (boolean) :  valid only where PHY do not have quartz and need to be clock
+                  by RCC
+
 Example:
 
        ethernet@40028000 {