staging: gpib: tnt4882: fixes multiline comments style

Fixes the style of multiline comments to comply with the linux kernel
coding style.

Signed-off-by: Paul Retourné <paul.retourne@orange.fr>
Link: https://lore.kernel.org/r/2b72df3bfc4a3f57679d2af52112e58acb5c259f.1744438358.git.paul.retourne@orange.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/gpib/tnt4882/tnt4882_gpib.c b/drivers/staging/gpib/tnt4882/tnt4882_gpib.c
index 8de0fa0ae8377ab422b63c8c5aac4d8b2b184dfb..da13d11c20bdb41819862e3603cf473ca8e94de2 100644 (file)
--- a/drivers/staging/gpib/tnt4882/tnt4882_gpib.c
+++ b/drivers/staging/gpib/tnt4882/tnt4882_gpib.c
@@ -258,7 +258,8 @@ static void tnt4882_release_holdoff(struct gpib_board *board, struct tnt4882_pri
 
        sasr_bits = tnt_readb(tnt_priv, SASR);
 
-       /*tnt4882 not in one-chip mode won't always release holdoff unless we
+       /*
+        * tnt4882 not in one-chip mode won't always release holdoff unless we
         * are in the right mode when release handshake command is given
         */
        if (sasr_bits & AEHS_BIT) /* holding off due to holdoff on end mode*/   {
@@ -384,7 +385,8 @@ static int tnt4882_accel_read(struct gpib_board *board, uint8_t *buffer, size_t
 
        nec7210_set_reg_bits(nec_priv, IMR1, HR_ENDIE, 0);
        nec7210_set_reg_bits(nec_priv, IMR2, HR_DMAI, 0);
-       /* force handling of any pending interrupts (seems to be needed
+       /*
+        * force handling of any pending interrupts (seems to be needed
         * to keep interrupts from getting hosed, plus for syncing
         * with RECEIVED_END below)
         */
@@ -531,7 +533,8 @@ static int generic_write(struct gpib_board *board, uint8_t *buffer, size_t lengt
 
        nec7210_set_reg_bits(nec_priv, IMR1, HR_ERR, 0x0);
        nec7210_set_reg_bits(nec_priv, IMR2, HR_DMAO, 0x0);
-       /* force handling of any interrupts that happened
+       /*
+        * force handling of any interrupts that happened
         * while they were masked (this appears to be needed)
         */
        tnt4882_internal_interrupt(board);
@@ -760,7 +763,8 @@ static void tnt4882_parallel_poll_response(struct gpib_board *board, int ist)
        nec7210_parallel_poll_response(board, &priv->nec7210_priv, ist);
 }
 
-/* this is just used by the old nec7210 isa interfaces, the newer
+/*
+ * this is just used by the old nec7210 isa interfaces, the newer
  * boards use tnt4882_serial_poll_response2
  */
 static void tnt4882_serial_poll_response(struct gpib_board *board, uint8_t status)
@@ -788,7 +792,8 @@ static void tnt4882_serial_poll_response2(struct gpib_board *board, uint8_t stat
                        priv->nec7210_priv.srq_pending = 0;
        }
        if (reqt)
-               /* It may seem like a race to issue reqt before updating
+               /*
+                * It may seem like a race to issue reqt before updating
                 * the status byte, but it is not.  The chip does not
                 * issue the reqt until the SPMR is written to at
                 * a later time.
@@ -796,7 +801,8 @@ static void tnt4882_serial_poll_response2(struct gpib_board *board, uint8_t stat
                write_byte(&priv->nec7210_priv, AUX_REQT, AUXMR);
        else if (reqf)
                write_byte(&priv->nec7210_priv, AUX_REQF, AUXMR);
-       /* We need to always zero bit 6 of the status byte before writing it to
+       /*
+        * We need to always zero bit 6 of the status byte before writing it to
         * the SPMR to insure we are using
         * serial poll mode SP1, and not accidentally triggering mode SP3.
         */
@@ -1581,10 +1587,10 @@ static int ni_gpib_probe(struct pcmcia_device *link)
 }
 
 /*
- *     This deletes a driver "instance".  The device is de-registered
- *     with Card Services.  If it has been released, all local data
- *     structures are freed.  Otherwise, the structures will be freed
- *     when the device is released.
+ * This deletes a driver "instance".  The device is de-registered
+ * with Card Services.  If it has been released, all local data
+ * structures are freed.  Otherwise, the structures will be freed
+ * when the device is released.
  */
 static void ni_gpib_remove(struct pcmcia_device *link)
 {
@@ -1611,9 +1617,9 @@ static int ni_gpib_config_iteration(struct pcmcia_device *link,   void *priv_data)
 }
 
 /*
- *     ni_gpib_config() is scheduled to run after a CARD_INSERTION event
- *     is received, to configure the PCMCIA socket, and to make the
- *     device available to the system.
+ * ni_gpib_config() is scheduled to run after a CARD_INSERTION event
+ * is received, to configure the PCMCIA socket, and to make the
+ * device available to the system.
  */
 static int ni_gpib_config(struct pcmcia_device *link)
 {