tty: amba-pl011: Use 32-bit accesses for SBSA UART
authorChristopher Covington <cov@codeaurora.org>
Fri, 1 Apr 2016 21:23:58 +0000 (17:23 -0400)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Sat, 30 Apr 2016 16:26:55 +0000 (09:26 -0700)
Version 2 of the Server Base System Architecture (SBSAv2) describes UART
hardware registers as 32 bits wide, giving no guidance on access sizes. The
SBSA UART driver previously assumed partial-length 16 and 8 bit accesses would
work. But the SBSAv2 UART hardware on the Qualcomm Technologies QDF2432 only
supports full-length 32 bit register accesses, so use those exclusively. This
is compatible with SBSAv3, which explicitly requires UART hardware support 32
(and 16 and sometimes 8) bit accesses.

Tested on Juno, Midway, QDF2432, Seattle, and X-Gene 1.

Tested-by: Mark Langsdorf <mlangsdo@redhat.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/tty/serial/amba-pl011.c

index 7c198e0a3178ae2ab9805c9f317c722d18b2dadf..a2aa655f56c4a8175c56d12845607dcb84786c14 100644 (file)
@@ -121,6 +121,7 @@ static struct vendor_data vendor_arm = {
 
 static struct vendor_data vendor_sbsa = {
        .reg_offset             = pl011_std_offsets,
+       .access_32b             = true,
        .oversampling           = false,
        .dma_threshold          = false,
        .cts_event_workaround   = false,