e1000e: Do not read ICR in Other interrupt
authorBenjamin Poirier <bpoirier@suse.com>
Mon, 9 Nov 2015 23:50:19 +0000 (15:50 -0800)
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>
Tue, 15 Dec 2015 03:36:13 +0000 (19:36 -0800)
Removes the ICR read in the other interrupt handler, uses EIAC to
autoclear the Other bit from ICR and IMS. This allows us to avoid
interference with Rx and Tx interrupts in the Other interrupt handler.

The information read from ICR is not needed. IMS is configured such that
the only interrupt cause that can trigger the Other interrupt is Link
Status Change.

Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
drivers/net/ethernet/intel/e1000e/netdev.c

index 26cf1833b86db84d813a3f2bd80283aecfbda674..56bc422dc8318892342b1a912d1873956d148477 100644 (file)
@@ -1905,24 +1905,15 @@ static irqreturn_t e1000_msix_other(int __always_unused irq, void *data)
        struct net_device *netdev = data;
        struct e1000_adapter *adapter = netdev_priv(netdev);
        struct e1000_hw *hw = &adapter->hw;
-       u32 icr = er32(ICR);
 
-       if (icr & adapter->eiac_mask)
-               ew32(ICS, (icr & adapter->eiac_mask));
+       hw->mac.get_link_status = true;
 
-       if (icr & E1000_ICR_OTHER) {
-               if (!(icr & E1000_ICR_LSC))
-                       goto no_link_interrupt;
-               hw->mac.get_link_status = true;
-               /* guard against interrupt when we're going down */
-               if (!test_bit(__E1000_DOWN, &adapter->state))
-                       mod_timer(&adapter->watchdog_timer, jiffies + 1);
+       /* guard against interrupt when we're going down */
+       if (!test_bit(__E1000_DOWN, &adapter->state)) {
+               mod_timer(&adapter->watchdog_timer, jiffies + 1);
+               ew32(IMS, E1000_IMS_OTHER);
        }
 
-no_link_interrupt:
-       if (!test_bit(__E1000_DOWN, &adapter->state))
-               ew32(IMS, E1000_IMS_LSC | E1000_IMS_OTHER);
-
        return IRQ_HANDLED;
 }
 
@@ -2021,6 +2012,7 @@ static void e1000_configure_msix(struct e1000_adapter *adapter)
                       hw->hw_addr + E1000_EITR_82574(vector));
        else
                writel(1, hw->hw_addr + E1000_EITR_82574(vector));
+       adapter->eiac_mask |= E1000_IMS_OTHER;
 
        /* Cause Tx interrupts on every write back */
        ivar |= (1 << 31);
@@ -2249,7 +2241,7 @@ static void e1000_irq_enable(struct e1000_adapter *adapter)
 
        if (adapter->msix_entries) {
                ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
-               ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
+               ew32(IMS, adapter->eiac_mask | E1000_IMS_LSC);
        } else if ((hw->mac.type == e1000_pch_lpt) ||
                   (hw->mac.type == e1000_pch_spt)) {
                ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER);