--- /dev/null
+BIN := vrl4
+
+.PHONY: all
+all: $(BIN)
+
+.PHONY: clean
+clean:
+ rm -f *.o $(BIN)
--- /dev/null
+/*
+ * vrl4 format generator
+ *
+ * Copyright (C) 2010 Simon Horman
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+/*
+ * usage: vrl4 < zImage > out
+ * dd if=out of=/dev/sdx bs=512 seek=1 # Write the image to sector 1
+ *
+ * Reads a zImage from stdin and writes a vrl4 image to stdout.
+ * In practice this means writing a padded vrl4 header to stdout followed
+ * by the zImage.
+ *
+ * The padding places the zImage at ALIGN bytes into the output.
+ * The vrl4 uses ALIGN + START_BASE as the start_address.
+ * This is where the mask ROM will jump to after verifying the header.
+ *
+ * The header sets copy_size to min(sizeof(zImage), MAX_BOOT_PROG_LEN) + ALIGN.
+ * That is, the mask ROM will load the padded header (ALIGN bytes)
+ * And then MAX_BOOT_PROG_LEN bytes of the image, or the entire image,
+ * whichever is smaller.
+ *
+ * The zImage is not modified in any way.
+ */
+
+#define _BSD_SOURCE
+#include <endian.h>
+#include <unistd.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <errno.h>
+
+struct hdr {
+ uint32_t magic1;
+ uint32_t reserved1;
+ uint32_t magic2;
+ uint32_t reserved2;
+ uint16_t copy_size;
+ uint16_t boot_options;
+ uint32_t reserved3;
+ uint32_t start_address;
+ uint32_t reserved4;
+ uint32_t reserved5;
+ char reserved6[308];
+};
+
+#define DECLARE_HDR(h) \
+ struct hdr (h) = { \
+ .magic1 = htole32(0xea000000), \
+ .reserved1 = htole32(0x56), \
+ .magic2 = htole32(0xe59ff008), \
+ .reserved3 = htole16(0x1) }
+
+/* Align to 512 bytes, the MMCIF sector size */
+#define ALIGN_BITS 9
+#define ALIGN (1 << ALIGN_BITS)
+
+#define START_BASE 0xe55b0000
+
+/*
+ * With an alignment of 512 the header uses the first sector.
+ * There is a 128 sector (64kbyte) limit on the data loaded by the mask ROM.
+ * So there are 127 sectors left for the boot programme. But in practice
+ * Only a small portion of a zImage is needed, 16 sectors should be more
+ * than enough.
+ *
+ * Note that this sets how much of the zImage is copied by the mask ROM.
+ * The entire zImage is present after the header and is loaded
+ * by the code in the boot program (which is the first portion of the zImage).
+ */
+#define MAX_BOOT_PROG_LEN (16 * 512)
+
+#define ROUND_UP(x) ((x + ALIGN - 1) & ~(ALIGN - 1))
+
+ssize_t do_read(int fd, void *buf, size_t count)
+{
+ size_t offset = 0;
+ ssize_t l;
+
+ while (offset < count) {
+ l = read(fd, buf + offset, count - offset);
+ if (!l)
+ break;
+ if (l < 0) {
+ if (errno == EAGAIN || errno == EWOULDBLOCK)
+ continue;
+ perror("read");
+ return -1;
+ }
+ offset += l;
+ }
+
+ return offset;
+}
+
+ssize_t do_write(int fd, const void *buf, size_t count)
+{
+ size_t offset = 0;
+ ssize_t l;
+
+ while (offset < count) {
+ l = write(fd, buf + offset, count - offset);
+ if (l < 0) {
+ if (errno == EAGAIN || errno == EWOULDBLOCK)
+ continue;
+ perror("write");
+ return -1;
+ }
+ offset += l;
+ }
+
+ return offset;
+}
+
+ssize_t write_zero(int fd, size_t len)
+{
+ size_t i = len;
+
+ while (i--) {
+ const char x = 0;
+ if (do_write(fd, &x, 1) < 0)
+ return -1;
+ }
+
+ return len;
+}
+
+int main(void)
+{
+ DECLARE_HDR(hdr);
+ char boot_program[MAX_BOOT_PROG_LEN];
+ size_t aligned_hdr_len, alligned_prog_len;
+ ssize_t prog_len;
+
+ prog_len = do_read(0, boot_program, sizeof(boot_program));
+ if (prog_len <= 0)
+ return -1;
+
+ aligned_hdr_len = ROUND_UP(sizeof(hdr));
+ hdr.start_address = htole32(START_BASE + aligned_hdr_len);
+ alligned_prog_len = ROUND_UP(prog_len);
+ hdr.copy_size = htole16(aligned_hdr_len + alligned_prog_len);
+
+ if (do_write(1, &hdr, sizeof(hdr)) < 0)
+ return -1;
+ if (write_zero(1, aligned_hdr_len - sizeof(hdr)) < 0)
+ return -1;
+
+ if (do_write(1, boot_program, prog_len) < 0)
+ return 1;
+
+ /* Write out the rest of the kernel */
+ while (1) {
+ prog_len = do_read(0, boot_program, sizeof(boot_program));
+ if (prog_len < 0)
+ return 1;
+ if (prog_len == 0)
+ break;
+ if (do_write(1, boot_program, prog_len) < 0)
+ return 1;
+ }
+
+ return 0;
+}
--- /dev/null
+ROM-able zImage boot from MMC
+-----------------------------
+
+An ROM-able zImage compiled with ZBOOT_ROM_MMCIF may be written to MMC and
+SuperH Mobile ARM will to boot directly from the MMCIF hardware block.
+
+This is achieved by the mask ROM loading the first portion of the image into
+MERAM and then jumping to it. This portion contains loader code which
+copies the entire image to SDRAM and jumps to it. From there the zImage
+boot code proceeds as normal, uncompressing the image into its final
+location and then jumping to it.
+
+This code has been tested on an AP4EB board using the developer 1A eMMC
+boot mode which is configured using the following jumper settings.
+The board used for testing required a patched mask ROM in order for
+this mode to function.
+
+ 8 7 6 5 4 3 2 1
+ x|x|x|x|x| |x|
+S4 -+-+-+-+-+-+-+-
+ | | | | |x| |x on
+
+The zImage must be written to the MMC card at sector 1 (512 bytes) in
+vrl4 format. A utility vrl4 is supplied to accomplish this.
+
+e.g.
+ vrl4 < zImage | dd of=/dev/sdX bs=512 seek=1
+
+A dual-voltage MMC 4.0 card was used for testing.
select HAVE_MEMBLOCK
select RTC_LIB
select SYS_SUPPORTS_APM_EMULATION
- select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
+ select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_KGDB
select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL)
select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC
select HAVE_REGS_AND_STACK_ACCESS_API
- select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V7))
+ select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
select HAVE_C_RECORDMCOUNT
select HAVE_GENERIC_HARDIRQS
select HAVE_SPARSE_IRQ
depends on GENERIC_CLOCKEVENTS
default y if SMP
+config KTIME_SCALAR
+ bool
+ default y
+
config HAVE_TCM
bool
select GENERIC_ALLOCATOR
config ARCH_MTD_XIP
bool
-config ARM_L1_CACHE_SHIFT_6
- bool
- help
- Setting ARM L1 cache line size to 64 Bytes.
-
config VECTORS_BASE
hex
default 0xffff0000 if MMU || CPU_HIGH_VECTOR
help
The base address of exception vectors.
+config ARM_PATCH_PHYS_VIRT
+ bool "Patch physical to virtual translations at runtime (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ depends on !XIP_KERNEL && MMU
+ depends on !ARCH_REALVIEW || !SPARSEMEM
+ help
+ Patch phys-to-virt translation functions at runtime according to
+ the position of the kernel in system memory.
+
+ This can only be used with non-XIP with MMU kernels where
+ the base of physical memory is at a 16MB boundary.
+
+config ARM_PATCH_PHYS_VIRT_16BIT
+ def_bool y
+ depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM
+
source "init/Kconfig"
source "kernel/Kconfig.freezer"
bool "FootBridge"
select CPU_SA110
select FOOTBRIDGE
- select ARCH_USES_GETTIMEOFFSET
+ select GENERIC_CLOCKEVENTS
help
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
config ARCH_DOVE
bool "Marvell Dove"
+ select CPU_V6K
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
help
Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
+config ARCH_VT8500
+ bool "VIA/WonderMedia 85xx"
+ select CPU_ARM926T
+ select GENERIC_GPIO
+ select ARCH_HAS_CPUFREQ
+ select GENERIC_CLOCKEVENTS
+ select ARCH_REQUIRE_GPIOLIB
+ select HAVE_PWM
+ help
+ Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
endchoice
#
source "arch/arm/mach-vexpress/Kconfig"
+source "arch/arm/mach-vt8500/Kconfig"
+
source "arch/arm/mach-w90x900/Kconfig"
# Definitions to make life easier
default y
config CPU_HAS_PMU
- depends on (CPU_V6 || CPU_V7 || XSCALE_PMU) && \
+ depends on (CPU_V6 || CPU_V6K || CPU_V7 || XSCALE_PMU) && \
(!ARCH_OMAP3 || OMAP3_EMU)
default y
bool
config ARM_ERRATA_411920
bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
- depends on CPU_V6
+ depends on CPU_V6 || CPU_V6K
help
Invalidation of the Instruction Cache operation can
fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
config PL310_ERRATA_588369
bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
- depends on CACHE_L2X0 && ARCH_OMAP4
+ depends on CACHE_L2X0
help
The PL310 L2 cache controller implements three types of Clean &
Invalidate maintenance operations: by Physical Address
clean operation followed immediately by an invalidate operation,
both performing to the same memory location. This functionality
is not correctly implemented in PL310 as clean lines are not
- invalidated as a result of these operations. Note that this errata
- uses Texas Instrument's secure monitor api.
+ invalidated as a result of these operations.
config ARM_ERRATA_720789
bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
tables. The workaround changes the TLB flushing routines to invalidate
entries regardless of the ASID.
+config PL310_ERRATA_727915
+ bool "Background Clean & Invalidate by Way operation can cause data corruption"
+ depends on CACHE_L2X0
+ help
+ PL310 implements the Clean & Invalidate by Way L2 cache maintenance
+ operation (offset 0x7FC). This operation runs in background so that
+ PL310 can handle normal accesses while it is in progress. Under very
+ rare circumstances, due to this erratum, write data can be lost when
+ PL310 treats a cacheable write transaction during a Clean &
+ Invalidate by Way operation.
+
config ARM_ERRATA_743622
bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
depends on CPU_V7
This has the same effect as the cache sync operation: store buffer
drain and waiting for all buffers empty.
+config ARM_ERRATA_754322
+ bool "ARM errata: possible faulty MMU translations following an ASID switch"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 754322 Cortex-A9 (r2p*,
+ r3p*) erratum. A speculative memory access may cause a page table walk
+ which starts prior to an ASID switch but completes afterwards. This
+ can populate the micro-TLB with a stale entry which may be hit with
+ the new ASID. This workaround places two dsb instructions in the mm
+ switching code so that no page table walks can cross the ASID switch.
+
+config ARM_ERRATA_754327
+ bool "ARM errata: no automatic Store Buffer drain"
+ depends on CPU_V7 && SMP
+ help
+ This option enables the workaround for the 754327 Cortex-A9 (prior to
+ r2p0) erratum. The Store Buffer does not have any automatic draining
+ mechanism and therefore a livelock may occur if an external agent
+ continuously polls a memory location waiting to observe an update.
+ This workaround defines cpu_relax() as smp_mb(), preventing correctly
+ written polling loops from denying visibility of updates to memory.
+
endmenu
source "arch/arm/common/Kconfig"
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
depends on EXPERIMENTAL
+ depends on CPU_V6K || CPU_V7
depends on GENERIC_CLOCKEVENTS
depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
config THUMB2_KERNEL
bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)"
- depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL
+ depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL
select AEABI
select ARM_ASM_UNIFIED
help
If unsure, say N.
+config THUMB2_AVOID_R_ARM_THM_JUMP11
+ bool "Work around buggy Thumb-2 short branch relocations in gas"
+ depends on THUMB2_KERNEL && MODULES
+ default y
+ help
+ Various binutils versions can resolve Thumb-2 branches to
+ locally-defined, preemptible global symbols as short-range "b.n"
+ branch instructions.
+
+ This is a problem, because there's no guarantee the final
+ destination of the symbol, or any candidate locations for a
+ trampoline, are within range of the branch. For this reason, the
+ kernel does not support fixing up the R_ARM_THM_JUMP11 (102)
+ relocation in modules at all, and it makes little sense to add
+ support.
+
+ The symptom is that the kernel fails with an "unsupported
+ relocation" error when loading some modules.
+
+ Until fixed tools are available, passing
+ -fno-optimize-sibling-calls to gcc should prevent gcc generating
+ code which hits this problem, at the cost of a bit of extra runtime
+ stack usage in some cases.
+
+ The problem is described in more detail at:
+ https://bugs.launchpad.net/binutils-linaro/+bug/725126
+
+ Only Thumb-2 kernels are affected.
+
+ Unless you are sure your tools don't have this problem, say Y.
+
config ARM_ASM_UNIFIED
bool
Say Y here if you intend to execute your compressed kernel image
(zImage) directly from ROM or flash. If unsure, say N.
+config ZBOOT_ROM_MMCIF
+ bool "Include MMCIF loader in zImage (EXPERIMENTAL)"
+ depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL
+ help
+ Say Y here to include experimental MMCIF loading code in the
+ ROM-able zImage. With this enabled it is possible to write the
+ the ROM-able zImage kernel image to an MMC card and boot the
+ kernel straight from the reset vector. At reset the processor
+ Mask ROM will load the first part of the the ROM-able zImage
+ which in turn loads the rest the kernel image to RAM using the
+ MMCIF hardware block.
+
config CMDLINE
string "Default kernel command string"
default ""
config VFP
bool "VFP-format floating point maths"
- depends on CPU_V6 || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
+ depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
help
Say Y to include VFP support code in the kernel. This is needed
if your hardware includes a VFP unit.
tune-$(CONFIG_CPU_XSC3) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
tune-$(CONFIG_CPU_FEROCEON) :=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
tune-$(CONFIG_CPU_V6) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
+tune-$(CONFIG_CPU_V6K) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
ifeq ($(CONFIG_AEABI),y)
CFLAGS_ABI :=-mabi=aapcs-linux -mno-thumb-interwork
AFLAGS_NOWARN :=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
CFLAGS_THUMB2 :=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
AFLAGS_THUMB2 :=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
+# Work around buggy relocation from gas if requested:
+ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y)
+CFLAGS_MODULE +=-fno-optimize-sibling-calls
+endif
endif
# Need -Uarm for gcc < 3.x
machine-$(CONFIG_ARCH_U8500) := ux500
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_VEXPRESS) := vexpress
+machine-$(CONFIG_ARCH_VT8500) := vt8500
machine-$(CONFIG_ARCH_W90X900) := w90x900
machine-$(CONFIG_ARCH_NUC93X) := nuc93x
machine-$(CONFIG_FOOTBRIDGE) := footbridge
zImage Image xipImage bootpImage uImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
-zinstall install: vmlinux
+zinstall uinstall install: vmlinux
$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
# We use MRPROPER_FILES and CLEAN_FILES now
echo ' (supply initrd image via make variable INITRD=<path>)'
echo ' install - Install uncompressed kernel'
echo ' zinstall - Install compressed kernel'
+ echo ' uinstall - Install U-Boot wrapped compressed kernel'
echo ' Install using (your) ~/bin/$(INSTALLKERNEL) or'
echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
echo ' install to $$(INSTALL_PATH) and run lilo'
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
$(obj)/zImage System.map "$(INSTALL_PATH)"
+uinstall: $(obj)/uImage
+ $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
+ $(obj)/uImage System.map "$(INSTALL_PATH)"
+
zi:
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
$(obj)/zImage System.map "$(INSTALL_PATH)"
# create a compressed vmlinuz image from the original vmlinux
#
+OBJS =
+
+# Ensure that mmcif loader code appears early in the image
+# to minimise that number of bocks that have to be read in
+# order to load it.
+ifeq ($(CONFIG_ZBOOT_ROM_MMCIF),y)
+ifeq ($(CONFIG_ARCH_SH7372),y)
+OBJS += mmcif-sh7372.o
+endif
+endif
+
AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
HEAD = head.o
-OBJS = misc.o decompress.o
+OBJS += misc.o decompress.o
FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c
#
OBJS += head-sa1100.o
endif
+ifeq ($(CONFIG_ARCH_VT8500),y)
+OBJS += head-vt8500.o
+endif
+
ifeq ($(CONFIG_CPU_XSCALE),y)
OBJS += head-xscale.o
endif
EXTRA_CFLAGS := -fpic -fno-builtin
EXTRA_AFLAGS := -Wa,-march=all
+# Provide size of uncompressed kernel to the decompressor via a linker symbol.
+LDFLAGS_vmlinux = --defsym _image_size=$(shell stat -c "%s" $(obj)/../Image)
# Supply ZRELADDR to the decompressor via a linker symbol.
ifneq ($(CONFIG_AUTO_ZRELADDR),y)
-LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
+LDFLAGS_vmlinux += --defsym zreladdr=$(ZRELADDR)
endif
ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
LDFLAGS_vmlinux += --be8
/* load board-specific initialization code */
#include <mach/zboot.h>
+#ifdef CONFIG_ZBOOT_ROM_MMCIF
+ /* Load image from MMC */
+ adr sp, __tmp_stack + 128
+ ldr r0, __image_start
+ ldr r1, __image_end
+ subs r1, r1, r0
+ ldr r0, __load_base
+ bl mmcif_loader
+
+ /* Jump to loaded code */
+ ldr r0, __loaded
+ ldr r1, __image_start
+ sub r0, r0, r1
+ ldr r1, __load_base
+ add pc, r0, r1
+
+__image_start:
+ .long _start
+__image_end:
+ .long _got_end
+__load_base:
+ .long CONFIG_MEMORY_START + 0x02000000 @ Load at 32Mb into SDRAM
+__loaded:
+ .long __continue
+ .align
+__tmp_stack:
+ .space 128
+__continue:
+#endif /* CONFIG_ZBOOT_ROM_MMCIF */
+
b 1f
__atags:@ tag #1
.long 12 @ tag->hdr.size = tag_size(tag_core);
--- /dev/null
+/*
+ * linux/arch/arm/boot/compressed/head-vt8500.S
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * VIA VT8500 specific tweaks. This is merged into head.S by the linker.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/mach-types.h>
+
+ .section ".start", "ax"
+
+__VT8500_start:
+ @ Compare the SCC ID register against a list of known values
+ ldr r1, .SCCID
+ ldr r3, [r1]
+
+ @ VT8500 override
+ ldr r4, .VT8500SCC
+ cmp r3, r4
+ ldreq r7, .ID_BV07
+ beq .Lendvt8500
+
+ @ WM8505 override
+ ldr r4, .WM8505SCC
+ cmp r3, r4
+ ldreq r7, .ID_8505
+ beq .Lendvt8500
+
+ @ Otherwise, leave the bootloader's machine id untouched
+
+.SCCID:
+ .word 0xd8120000
+.VT8500SCC:
+ .word 0x34000102
+.WM8505SCC:
+ .word 0x34260103
+
+.ID_BV07:
+ .word MACH_TYPE_BV07
+.ID_8505:
+ .word MACH_TYPE_WM8505_7IN_NETBOOK
+
+.Lendvt8500:
#if defined(CONFIG_DEBUG_ICEDCC)
-#ifdef CONFIG_CPU_V6
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
.macro loadsp, rb, tmp
.endm
.macro writeb, ch, rb
.arm @ Always enter in ARM state
start:
.type start,#function
- THUMB( adr r12, BSYM(1f) )
- THUMB( bx r12 )
- THUMB( .rept 6 )
- ARM( .rept 8 )
+ .rept 7
mov r0, r0
.endr
+ ARM( mov r0, r0 )
+ ARM( b 1f )
+ THUMB( adr r12, BSYM(1f) )
+ THUMB( bx r12 )
- b 1f
.word 0x016f2818 @ Magic numbers to help the loader
.word start @ absolute load/run zImage address
.word _edata @ zImage end address
*/
.text
- adr r0, LC0
- ldmia r0, {r1, r2, r3, r5, r6, r11, ip}
- ldr sp, [r0, #28]
+
#ifdef CONFIG_AUTO_ZRELADDR
@ determine final kernel image address
mov r4, pc
#else
ldr r4, =zreladdr
#endif
- subs r0, r0, r1 @ calculate the delta offset
- @ if delta is zero, we are
- beq not_relocated @ running at the address we
- @ were linked at.
+ bl cache_on
+
+restart: adr r0, LC0
+ ldmia r0, {r1, r2, r3, r5, r6, r9, r11, r12}
+ ldr sp, [r0, #32]
+
+ /*
+ * We might be running at a different address. We need
+ * to fix up various pointers.
+ */
+ sub r0, r0, r1 @ calculate the delta offset
+ add r5, r5, r0 @ _start
+ add r6, r6, r0 @ _edata
+#ifndef CONFIG_ZBOOT_ROM
+ /* malloc space is above the relocated stack (64k max) */
+ add sp, sp, r0
+ add r10, sp, #0x10000
+#else
/*
- * We're running at a different address. We need to fix
- * up various pointers:
- * r5 - zImage base address (_start)
- * r6 - size of decompressed image
- * r11 - GOT start
- * ip - GOT end
+ * With ZBOOT_ROM the bss/stack is non relocatable,
+ * but someone could still run this code from RAM,
+ * in which case our reference is _edata.
*/
- add r5, r5, r0
+ mov r10, r6
+#endif
+
+/*
+ * Check to see if we will overwrite ourselves.
+ * r4 = final kernel address
+ * r5 = start of this image
+ * r9 = size of decompressed image
+ * r10 = end of this image, including bss/stack/malloc space if non XIP
+ * We basically want:
+ * r4 >= r10 -> OK
+ * r4 + image length <= r5 -> OK
+ */
+ cmp r4, r10
+ bhs wont_overwrite
+ add r10, r4, r9
+ cmp r10, r5
+ bls wont_overwrite
+
+/*
+ * Relocate ourselves past the end of the decompressed kernel.
+ * r5 = start of this image
+ * r6 = _edata
+ * r10 = end of the decompressed kernel
+ * Because we always copy ahead, we need to do it from the end and go
+ * backward in case the source and destination overlap.
+ */
+ /* Round up to next 256-byte boundary. */
+ add r10, r10, #256
+ bic r10, r10, #255
+
+ sub r9, r6, r5 @ size to copy
+ add r9, r9, #31 @ rounded up to a multiple
+ bic r9, r9, #31 @ ... of 32 bytes
+ add r6, r9, r5
+ add r9, r9, r10
+
+1: ldmdb r6!, {r0 - r3, r10 - r12, lr}
+ cmp r6, r5
+ stmdb r9!, {r0 - r3, r10 - r12, lr}
+ bhi 1b
+
+ /* Preserve offset to relocated code. */
+ sub r6, r9, r6
+
+ bl cache_clean_flush
+
+ adr r0, BSYM(restart)
+ add r0, r0, r6
+ mov pc, r0
+
+wont_overwrite:
+/*
+ * If delta is zero, we are running at the address we were linked at.
+ * r0 = delta
+ * r2 = BSS start
+ * r3 = BSS end
+ * r4 = kernel execution address
+ * r7 = architecture ID
+ * r8 = atags pointer
+ * r11 = GOT start
+ * r12 = GOT end
+ * sp = stack pointer
+ */
+ teq r0, #0
+ beq not_relocated
add r11, r11, r0
- add ip, ip, r0
+ add r12, r12, r0
#ifndef CONFIG_ZBOOT_ROM
/*
* If we're running fully PIC === CONFIG_ZBOOT_ROM = n,
* we need to fix up pointers into the BSS region.
- * r2 - BSS start
- * r3 - BSS end
- * sp - stack pointer
+ * Note that the stack pointer has already been fixed up.
*/
add r2, r2, r0
add r3, r3, r0
- add sp, sp, r0
/*
* Relocate all entries in the GOT table.
1: ldr r1, [r11, #0] @ relocate entries in the GOT
add r1, r1, r0 @ table. This fixes up the
str r1, [r11], #4 @ C references.
- cmp r11, ip
+ cmp r11, r12
blo 1b
#else
cmphs r3, r1 @ _end < entry
addlo r1, r1, r0 @ table. This fixes up the
str r1, [r11], #4 @ C references.
- cmp r11, ip
+ cmp r11, r12
blo 1b
#endif
cmp r2, r3
blo 1b
- /*
- * The C runtime environment should now be setup
- * sufficiently. Turn the cache on, set up some
- * pointers, and start decompressing.
- */
- bl cache_on
-
- mov r1, sp @ malloc space above stack
- add r2, sp, #0x10000 @ 64k max
-
/*
- * Check to see if we will overwrite ourselves.
- * r4 = final kernel address
- * r5 = start of this image
- * r6 = size of decompressed image
- * r2 = end of malloc space (and therefore this image)
- * We basically want:
- * r4 >= r2 -> OK
- * r4 + image length <= r5 -> OK
+ * The C runtime environment should now be setup sufficiently.
+ * Set up some pointers, and start decompressing.
+ * r4 = kernel execution address
+ * r7 = architecture ID
+ * r8 = atags pointer
*/
- cmp r4, r2
- bhs wont_overwrite
- add r0, r4, r6
- cmp r0, r5
- bls wont_overwrite
-
- mov r5, r2 @ decompress after malloc space
- mov r0, r5
+ mov r0, r4
+ mov r1, sp @ malloc space above stack
+ add r2, sp, #0x10000 @ 64k max
mov r3, r7
bl decompress_kernel
-
- add r0, r0, #127 + 128 @ alignment + stack
- bic r0, r0, #127 @ align the kernel length
-/*
- * r0 = decompressed kernel length
- * r1-r3 = unused
- * r4 = kernel execution address
- * r5 = decompressed kernel start
- * r7 = architecture ID
- * r8 = atags pointer
- * r9-r12,r14 = corrupted
- */
- add r1, r5, r0 @ end of decompressed kernel
- adr r2, reloc_start
- ldr r3, LC1
- add r3, r2, r3
-1: ldmia r2!, {r9 - r12, r14} @ copy relocation code
- stmia r1!, {r9 - r12, r14}
- ldmia r2!, {r9 - r12, r14}
- stmia r1!, {r9 - r12, r14}
- cmp r2, r3
- blo 1b
- mov sp, r1
- add sp, sp, #128 @ relocate the stack
-
bl cache_clean_flush
- ARM( add pc, r5, r0 ) @ call relocation code
- THUMB( add r12, r5, r0 )
- THUMB( mov pc, r12 ) @ call relocation code
-
-/*
- * We're not in danger of overwriting ourselves. Do this the simple way.
- *
- * r4 = kernel execution address
- * r7 = architecture ID
- */
-wont_overwrite: mov r0, r4
- mov r3, r7
- bl decompress_kernel
- b call_kernel
+ bl cache_off
+ mov r0, #0 @ must be zero
+ mov r1, r7 @ restore architecture number
+ mov r2, r8 @ restore atags pointer
+ mov pc, r4 @ call kernel
.align 2
.type LC0, #object
.word __bss_start @ r2
.word _end @ r3
.word _start @ r5
- .word _image_size @ r6
+ .word _edata @ r6
+ .word _image_size @ r9
.word _got_start @ r11
.word _got_end @ ip
.word user_stack_end @ sp
-LC1: .word reloc_end - reloc_start
.size LC0, . - LC0
#ifdef CONFIG_ARCH_RPC
* On exit,
* r0, r1, r2, r3, r9, r10, r12 corrupted
* This routine must preserve:
- * r4, r5, r6, r7, r8
+ * r4, r7, r8
*/
.align 5
cache_on: mov r3, #8 @ cache_on function
sub pc, lr, r0, lsr #32 @ properly flush pipeline
#endif
-/*
- * All code following this line is relocatable. It is relocated by
- * the above code to the end of the decompressed kernel image and
- * executed there. During this time, we have no stacks.
- *
- * r0 = decompressed kernel length
- * r1-r3 = unused
- * r4 = kernel execution address
- * r5 = decompressed kernel start
- * r7 = architecture ID
- * r8 = atags pointer
- * r9-r12,r14 = corrupted
- */
- .align 5
-reloc_start: add r9, r5, r0
- sub r9, r9, #128 @ do not copy the stack
- debug_reloc_start
- mov r1, r4
-1:
- .rept 4
- ldmia r5!, {r0, r2, r3, r10 - r12, r14} @ relocate kernel
- stmia r1!, {r0, r2, r3, r10 - r12, r14}
- .endr
-
- cmp r5, r9
- blo 1b
- mov sp, r1
- add sp, sp, #128 @ relocate the stack
- debug_reloc_end
-
-call_kernel: bl cache_clean_flush
- bl cache_off
- mov r0, #0 @ must be zero
- mov r1, r7 @ restore architecture number
- mov r2, r8 @ restore atags pointer
- mov pc, r4 @ call kernel
-
/*
* Here follow the relocatable cache support functions for the
* various processors. This is a generic hook for locating an
* On exit,
* r0, r1, r2, r3, r9, r12 corrupted
* This routine must preserve:
- * r4, r6, r7
+ * r4, r7, r8
*/
.align 5
cache_off: mov r3, #12 @ cache_off function
* On exit,
* r1, r2, r3, r9, r10, r11, r12 corrupted
* This routine must preserve:
- * r0, r4, r5, r6, r7
+ * r4, r6, r7, r8
*/
.align 5
cache_clean_flush:
#endif
.ltorg
-reloc_end:
.align
.section ".stack", "aw", %nobits
#ifdef CONFIG_DEBUG_ICEDCC
-#ifdef CONFIG_CPU_V6
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
static void icedcc_putc(int ch)
{
--- /dev/null
+/*
+ * sh7372 MMCIF loader
+ *
+ * Copyright (C) 2010 Magnus Damm
+ * Copyright (C) 2010 Simon Horman
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/mmc/sh_mmcif.h>
+#include <mach/mmcif.h>
+
+#define MMCIF_BASE (void __iomem *)0xe6bd0000
+
+#define PORT84CR (void __iomem *)0xe6050054
+#define PORT85CR (void __iomem *)0xe6050055
+#define PORT86CR (void __iomem *)0xe6050056
+#define PORT87CR (void __iomem *)0xe6050057
+#define PORT88CR (void __iomem *)0xe6050058
+#define PORT89CR (void __iomem *)0xe6050059
+#define PORT90CR (void __iomem *)0xe605005a
+#define PORT91CR (void __iomem *)0xe605005b
+#define PORT92CR (void __iomem *)0xe605005c
+#define PORT99CR (void __iomem *)0xe6050063
+
+#define SMSTPCR3 (void __iomem *)0xe615013c
+
+/* SH7372 specific MMCIF loader
+ *
+ * loads the zImage from an MMC card starting from block 1.
+ *
+ * The image must be start with a vrl4 header and
+ * the zImage must start at offset 512 of the image. That is,
+ * at block 2 (=byte 1024) on the media
+ *
+ * Use the following line to write the vrl4 formated zImage
+ * to an MMC card
+ * # dd if=vrl4.out of=/dev/sdx bs=512 seek=1
+ */
+asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len)
+{
+ mmcif_init_progress();
+ mmcif_update_progress(MMCIF_PROGRESS_ENTER);
+
+ /* Initialise MMC
+ * registers: PORT84CR-PORT92CR
+ * (MMCD0_0-MMCD0_7,MMCCMD0 Control)
+ * value: 0x04 - select function 4
+ */
+ __raw_writeb(0x04, PORT84CR);
+ __raw_writeb(0x04, PORT85CR);
+ __raw_writeb(0x04, PORT86CR);
+ __raw_writeb(0x04, PORT87CR);
+ __raw_writeb(0x04, PORT88CR);
+ __raw_writeb(0x04, PORT89CR);
+ __raw_writeb(0x04, PORT90CR);
+ __raw_writeb(0x04, PORT91CR);
+ __raw_writeb(0x04, PORT92CR);
+
+ /* Initialise MMC
+ * registers: PORT99CR (MMCCLK0 Control)
+ * value: 0x10 | 0x04 - enable output | select function 4
+ */
+ __raw_writeb(0x14, PORT99CR);
+
+ /* Enable clock to MMC hardware block */
+ __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 12), SMSTPCR3);
+
+ mmcif_update_progress(MMCIF_PROGRESS_INIT);
+
+ /* setup MMCIF hardware */
+ sh_mmcif_boot_init(MMCIF_BASE);
+
+ mmcif_update_progress(MMCIF_PROGRESS_LOAD);
+
+ /* load kernel via MMCIF interface */
+ sh_mmcif_boot_do_read(MMCIF_BASE, 2, /* Kernel is at block 2 */
+ (len + SH_MMCIF_BBS - 1) / SH_MMCIF_BBS, buf);
+
+
+ /* Disable clock to MMC hardware block */
+ __raw_writel(__raw_readl(SMSTPCR3) & (1 << 12), SMSTPCR3);
+
+ mmcif_update_progress(MMCIF_PROGRESS_DONE);
+}
_etext = .;
- /* Assume size of decompressed image is 4x the compressed image */
- _image_size = (_etext - _text) * 4;
-
_got_start = .;
.got : { *(.got) }
_got_end = .;
void __iomem *cpu_base;
};
+/*
+ * Supported arch specific GIC irq extension.
+ * Default make them NULL.
+ */
+struct irq_chip gic_arch_extn = {
+ .irq_ack = NULL,
+ .irq_mask = NULL,
+ .irq_unmask = NULL,
+ .irq_retrigger = NULL,
+ .irq_set_type = NULL,
+ .irq_set_wake = NULL,
+};
+
#ifndef MAX_GIC_NR
#define MAX_GIC_NR 1
#endif
static void gic_ack_irq(struct irq_data *d)
{
spin_lock(&irq_controller_lock);
+ if (gic_arch_extn.irq_ack)
+ gic_arch_extn.irq_ack(d);
writel(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI);
spin_unlock(&irq_controller_lock);
}
spin_lock(&irq_controller_lock);
writel(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4);
+ if (gic_arch_extn.irq_mask)
+ gic_arch_extn.irq_mask(d);
spin_unlock(&irq_controller_lock);
}
u32 mask = 1 << (d->irq % 32);
spin_lock(&irq_controller_lock);
+ if (gic_arch_extn.irq_unmask)
+ gic_arch_extn.irq_unmask(d);
writel(mask, gic_dist_base(d) + GIC_DIST_ENABLE_SET + (gic_irq(d) / 32) * 4);
spin_unlock(&irq_controller_lock);
}
spin_lock(&irq_controller_lock);
+ if (gic_arch_extn.irq_set_type)
+ gic_arch_extn.irq_set_type(d, type);
+
val = readl(base + GIC_DIST_CONFIG + confoff);
if (type == IRQ_TYPE_LEVEL_HIGH)
val &= ~confmask;
return 0;
}
+static int gic_retrigger(struct irq_data *d)
+{
+ if (gic_arch_extn.irq_retrigger)
+ return gic_arch_extn.irq_retrigger(d);
+
+ return -ENXIO;
+}
+
#ifdef CONFIG_SMP
-static int
-gic_set_cpu(struct irq_data *d, const struct cpumask *mask_val, bool force)
+static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
+ bool force)
{
void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3);
unsigned int shift = (d->irq % 4) * 8;
unsigned int cpu = cpumask_first(mask_val);
- u32 val;
- struct irq_desc *desc;
+ u32 val, mask, bit;
- spin_lock(&irq_controller_lock);
- desc = irq_to_desc(d->irq);
- if (desc == NULL) {
- spin_unlock(&irq_controller_lock);
+ if (cpu >= 8)
return -EINVAL;
- }
+
+ mask = 0xff << shift;
+ bit = 1 << (cpu + shift);
+
+ spin_lock(&irq_controller_lock);
d->node = cpu;
- val = readl(reg) & ~(0xff << shift);
- val |= 1 << (cpu + shift);
- writel(val, reg);
+ val = readl(reg) & ~mask;
+ writel(val | bit, reg);
spin_unlock(&irq_controller_lock);
return 0;
}
#endif
+#ifdef CONFIG_PM
+static int gic_set_wake(struct irq_data *d, unsigned int on)
+{
+ int ret = -ENXIO;
+
+ if (gic_arch_extn.irq_set_wake)
+ ret = gic_arch_extn.irq_set_wake(d, on);
+
+ return ret;
+}
+
+#else
+#define gic_set_wake NULL
+#endif
+
static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
{
struct gic_chip_data *chip_data = get_irq_data(irq);
.irq_mask = gic_mask_irq,
.irq_unmask = gic_unmask_irq,
.irq_set_type = gic_set_type,
+ .irq_retrigger = gic_retrigger,
#ifdef CONFIG_SMP
- .irq_set_affinity = gic_set_cpu,
+ .irq_set_affinity = gic_set_affinity,
#endif
+ .irq_set_wake = gic_set_wake,
};
void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
dump->u_dsize = (tsk->mm->brk - tsk->mm->start_data + PAGE_SIZE - 1) >> PAGE_SHIFT;
dump->u_ssize = 0;
- dump->u_debugreg[0] = tsk->thread.debug.bp[0].address;
- dump->u_debugreg[1] = tsk->thread.debug.bp[1].address;
- dump->u_debugreg[2] = tsk->thread.debug.bp[0].insn.arm;
- dump->u_debugreg[3] = tsk->thread.debug.bp[1].insn.arm;
- dump->u_debugreg[4] = tsk->thread.debug.nsaved;
+ memset(dump->u_debugreg, 0, sizeof(dump->u_debugreg));
if (dump->start_stack < 0x04000000)
dump->u_ssize = (0x04000000 - dump->start_stack) >> PAGE_SHIFT;
* Note that bit 0 is defined to be 32-bit word bit 0, not byte 0 bit 0.
*/
+/*
+ * Native endian assembly bitops. nr = 0 -> word 0 bit 0.
+ */
+extern void _set_bit(int nr, volatile unsigned long * p);
+extern void _clear_bit(int nr, volatile unsigned long * p);
+extern void _change_bit(int nr, volatile unsigned long * p);
+extern int _test_and_set_bit(int nr, volatile unsigned long * p);
+extern int _test_and_clear_bit(int nr, volatile unsigned long * p);
+extern int _test_and_change_bit(int nr, volatile unsigned long * p);
+
/*
* Little endian assembly bitops. nr = 0 -> byte 0 bit 0.
*/
-extern void _set_bit_le(int nr, volatile unsigned long * p);
-extern void _clear_bit_le(int nr, volatile unsigned long * p);
-extern void _change_bit_le(int nr, volatile unsigned long * p);
-extern int _test_and_set_bit_le(int nr, volatile unsigned long * p);
-extern int _test_and_clear_bit_le(int nr, volatile unsigned long * p);
-extern int _test_and_change_bit_le(int nr, volatile unsigned long * p);
extern int _find_first_zero_bit_le(const void * p, unsigned size);
extern int _find_next_zero_bit_le(const void * p, int size, int offset);
extern int _find_first_bit_le(const unsigned long *p, unsigned size);
/*
* Big endian assembly bitops. nr = 0 -> byte 3 bit 0.
*/
-extern void _set_bit_be(int nr, volatile unsigned long * p);
-extern void _clear_bit_be(int nr, volatile unsigned long * p);
-extern void _change_bit_be(int nr, volatile unsigned long * p);
-extern int _test_and_set_bit_be(int nr, volatile unsigned long * p);
-extern int _test_and_clear_bit_be(int nr, volatile unsigned long * p);
-extern int _test_and_change_bit_be(int nr, volatile unsigned long * p);
extern int _find_first_zero_bit_be(const void * p, unsigned size);
extern int _find_next_zero_bit_be(const void * p, int size, int offset);
extern int _find_first_bit_be(const unsigned long *p, unsigned size);
/*
* The __* form of bitops are non-atomic and may be reordered.
*/
-#define ATOMIC_BITOP_LE(name,nr,p) \
- (__builtin_constant_p(nr) ? \
- ____atomic_##name(nr, p) : \
- _##name##_le(nr,p))
-
-#define ATOMIC_BITOP_BE(name,nr,p) \
- (__builtin_constant_p(nr) ? \
- ____atomic_##name(nr, p) : \
- _##name##_be(nr,p))
+#define ATOMIC_BITOP(name,nr,p) \
+ (__builtin_constant_p(nr) ? ____atomic_##name(nr, p) : _##name(nr,p))
#else
-#define ATOMIC_BITOP_LE(name,nr,p) _##name##_le(nr,p)
-#define ATOMIC_BITOP_BE(name,nr,p) _##name##_be(nr,p)
+#define ATOMIC_BITOP(name,nr,p) _##name(nr,p)
#endif
-#define NONATOMIC_BITOP(name,nr,p) \
- (____nonatomic_##name(nr, p))
+/*
+ * Native endian atomic definitions.
+ */
+#define set_bit(nr,p) ATOMIC_BITOP(set_bit,nr,p)
+#define clear_bit(nr,p) ATOMIC_BITOP(clear_bit,nr,p)
+#define change_bit(nr,p) ATOMIC_BITOP(change_bit,nr,p)
+#define test_and_set_bit(nr,p) ATOMIC_BITOP(test_and_set_bit,nr,p)
+#define test_and_clear_bit(nr,p) ATOMIC_BITOP(test_and_clear_bit,nr,p)
+#define test_and_change_bit(nr,p) ATOMIC_BITOP(test_and_change_bit,nr,p)
#ifndef __ARMEB__
/*
* These are the little endian, atomic definitions.
*/
-#define set_bit(nr,p) ATOMIC_BITOP_LE(set_bit,nr,p)
-#define clear_bit(nr,p) ATOMIC_BITOP_LE(clear_bit,nr,p)
-#define change_bit(nr,p) ATOMIC_BITOP_LE(change_bit,nr,p)
-#define test_and_set_bit(nr,p) ATOMIC_BITOP_LE(test_and_set_bit,nr,p)
-#define test_and_clear_bit(nr,p) ATOMIC_BITOP_LE(test_and_clear_bit,nr,p)
-#define test_and_change_bit(nr,p) ATOMIC_BITOP_LE(test_and_change_bit,nr,p)
#define find_first_zero_bit(p,sz) _find_first_zero_bit_le(p,sz)
#define find_next_zero_bit(p,sz,off) _find_next_zero_bit_le(p,sz,off)
#define find_first_bit(p,sz) _find_first_bit_le(p,sz)
#define WORD_BITOFF_TO_LE(x) ((x))
#else
-
/*
* These are the big endian, atomic definitions.
*/
-#define set_bit(nr,p) ATOMIC_BITOP_BE(set_bit,nr,p)
-#define clear_bit(nr,p) ATOMIC_BITOP_BE(clear_bit,nr,p)
-#define change_bit(nr,p) ATOMIC_BITOP_BE(change_bit,nr,p)
-#define test_and_set_bit(nr,p) ATOMIC_BITOP_BE(test_and_set_bit,nr,p)
-#define test_and_clear_bit(nr,p) ATOMIC_BITOP_BE(test_and_clear_bit,nr,p)
-#define test_and_change_bit(nr,p) ATOMIC_BITOP_BE(test_and_change_bit,nr,p)
#define find_first_zero_bit(p,sz) _find_first_zero_bit_be(p,sz)
#define find_next_zero_bit(p,sz,off) _find_next_zero_bit_be(p,sz,off)
#define find_first_bit(p,sz) _find_first_bit_be(p,sz)
#include <linux/mm.h>
-#include <asm/glue.h>
+#include <asm/glue-cache.h>
#include <asm/shmparam.h>
#include <asm/cachetype.h>
#include <asm/outercache.h>
#define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
-/*
- * Cache Model
- * ===========
- */
-#undef _CACHE
-#undef MULTI_CACHE
-
-#if defined(CONFIG_CPU_CACHE_V3)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE v3
-# endif
-#endif
-
-#if defined(CONFIG_CPU_CACHE_V4)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE v4
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
- defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \
- defined(CONFIG_CPU_ARM1026)
-# define MULTI_CACHE 1
-#endif
-
-#if defined(CONFIG_CPU_FA526)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE fa
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM926T)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE arm926
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM940T)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE arm940
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM946E)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE arm946
-# endif
-#endif
-
-#if defined(CONFIG_CPU_CACHE_V4WB)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE v4wb
-# endif
-#endif
-
-#if defined(CONFIG_CPU_XSCALE)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE xscale
-# endif
-#endif
-
-#if defined(CONFIG_CPU_XSC3)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE xsc3
-# endif
-#endif
-
-#if defined(CONFIG_CPU_MOHAWK)
-# ifdef _CACHE
-# define MULTI_CACHE 1
-# else
-# define _CACHE mohawk
-# endif
-#endif
-
-#if defined(CONFIG_CPU_FEROCEON)
-# define MULTI_CACHE 1
-#endif
-
-#if defined(CONFIG_CPU_V6)
-//# ifdef _CACHE
-# define MULTI_CACHE 1
-//# else
-//# define _CACHE v6
-//# endif
-#endif
-
-#if defined(CONFIG_CPU_V7)
-//# ifdef _CACHE
-# define MULTI_CACHE 1
-//# else
-//# define _CACHE v7
-//# endif
-#endif
-
-#if !defined(_CACHE) && !defined(MULTI_CACHE)
-#error Unknown cache maintainence model
-#endif
-
/*
* This flag is used to indicate that the page pointed to by a pte is clean
* and does not require cleaning before returning it to the user.
* visible to the CPU.
*/
#define dmac_map_area cpu_cache.dma_map_area
-#define dmac_unmap_area cpu_cache.dma_unmap_area
+#define dmac_unmap_area cpu_cache.dma_unmap_area
#define dmac_flush_range cpu_cache.dma_flush_range
#else
-#define __cpuc_flush_icache_all __glue(_CACHE,_flush_icache_all)
-#define __cpuc_flush_kern_all __glue(_CACHE,_flush_kern_cache_all)
-#define __cpuc_flush_user_all __glue(_CACHE,_flush_user_cache_all)
-#define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range)
-#define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range)
-#define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range)
-#define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area)
-
extern void __cpuc_flush_icache_all(void);
extern void __cpuc_flush_kern_all(void);
extern void __cpuc_flush_user_all(void);
* is visible to DMA, or data written by DMA to system memory is
* visible to the CPU.
*/
-#define dmac_map_area __glue(_CACHE,_dma_map_area)
-#define dmac_unmap_area __glue(_CACHE,_dma_unmap_area)
-#define dmac_flush_range __glue(_CACHE,_dma_flush_range)
-
extern void dmac_map_area(const void *, size_t, int);
extern void dmac_unmap_area(const void *, size_t, int);
extern void dmac_flush_range(const void *, const void *);
* Optimized __flush_icache_all for the common cases. Note that UP ARMv7
* will fall through to use __flush_icache_all_generic.
*/
-#if (defined(CONFIG_CPU_V7) && defined(CONFIG_CPU_V6)) || \
+#if (defined(CONFIG_CPU_V7) && \
+ (defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K))) || \
defined(CONFIG_SMP_ON_UP)
#define __flush_icache_preferred __cpuc_flush_icache_all
#elif __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP)
+++ /dev/null
-/*
- * arch/arm/include/asm/cpu-multi32.h
- *
- * Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/page.h>
-
-struct mm_struct;
-
-/*
- * Don't change this structure - ASM code
- * relies on it.
- */
-extern struct processor {
- /* MISC
- * get data abort address/flags
- */
- void (*_data_abort)(unsigned long pc);
- /*
- * Retrieve prefetch fault address
- */
- unsigned long (*_prefetch_abort)(unsigned long lr);
- /*
- * Set up any processor specifics
- */
- void (*_proc_init)(void);
- /*
- * Disable any processor specifics
- */
- void (*_proc_fin)(void);
- /*
- * Special stuff for a reset
- */
- void (*reset)(unsigned long addr) __attribute__((noreturn));
- /*
- * Idle the processor
- */
- int (*_do_idle)(void);
- /*
- * Processor architecture specific
- */
- /*
- * clean a virtual address range from the
- * D-cache without flushing the cache.
- */
- void (*dcache_clean_area)(void *addr, int size);
-
- /*
- * Set the page table
- */
- void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm);
- /*
- * Set a possibly extended PTE. Non-extended PTEs should
- * ignore 'ext'.
- */
- void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext);
-} processor;
-
-#define cpu_proc_init() processor._proc_init()
-#define cpu_proc_fin() processor._proc_fin()
-#define cpu_reset(addr) processor.reset(addr)
-#define cpu_do_idle() processor._do_idle()
-#define cpu_dcache_clean_area(addr,sz) processor.dcache_clean_area(addr,sz)
-#define cpu_set_pte_ext(ptep,pte,ext) processor.set_pte_ext(ptep,pte,ext)
-#define cpu_do_switch_mm(pgd,mm) processor.switch_mm(pgd,mm)
+++ /dev/null
-/*
- * arch/arm/include/asm/cpu-single.h
- *
- * Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/*
- * Single CPU
- */
-#ifdef __STDC__
-#define __catify_fn(name,x) name##x
-#else
-#define __catify_fn(name,x) name/**/x
-#endif
-#define __cpu_fn(name,x) __catify_fn(name,x)
-
-/*
- * If we are supporting multiple CPUs, then we must use a table of
- * function pointers for this lot. Otherwise, we can optimise the
- * table away.
- */
-#define cpu_proc_init __cpu_fn(CPU_NAME,_proc_init)
-#define cpu_proc_fin __cpu_fn(CPU_NAME,_proc_fin)
-#define cpu_reset __cpu_fn(CPU_NAME,_reset)
-#define cpu_do_idle __cpu_fn(CPU_NAME,_do_idle)
-#define cpu_dcache_clean_area __cpu_fn(CPU_NAME,_dcache_clean_area)
-#define cpu_do_switch_mm __cpu_fn(CPU_NAME,_switch_mm)
-#define cpu_set_pte_ext __cpu_fn(CPU_NAME,_set_pte_ext)
-
-#include <asm/page.h>
-
-struct mm_struct;
-
-/* declare all the functions as extern */
-extern void cpu_proc_init(void);
-extern void cpu_proc_fin(void);
-extern int cpu_do_idle(void);
-extern void cpu_dcache_clean_area(void *, int);
-extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
-extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
-extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
#define CPUID_EXT_ISAR4 "c2, 4"
#define CPUID_EXT_ISAR5 "c2, 5"
+extern unsigned int processor_id;
+
#ifdef CONFIG_CPU_CP15
#define read_cpuid(reg) \
({ \
__val; \
})
#else
-extern unsigned int processor_id;
#define read_cpuid(reg) (processor_id)
#define read_cpuid_ext(reg) 0
#endif
--- /dev/null
+/*
+ * arch/arm/include/asm/fncpy.h - helper macros for function body copying
+ *
+ * Copyright (C) 2011 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/*
+ * These macros are intended for use when there is a need to copy a low-level
+ * function body into special memory.
+ *
+ * For example, when reconfiguring the SDRAM controller, the code doing the
+ * reconfiguration may need to run from SRAM.
+ *
+ * NOTE: that the copied function body must be entirely self-contained and
+ * position-independent in order for this to work properly.
+ *
+ * NOTE: in order for embedded literals and data to get referenced correctly,
+ * the alignment of functions must be preserved when copying. To ensure this,
+ * the source and destination addresses for fncpy() must be aligned to a
+ * multiple of 8 bytes: you will be get a BUG() if this condition is not met.
+ * You will typically need a ".align 3" directive in the assembler where the
+ * function to be copied is defined, and ensure that your allocator for the
+ * destination buffer returns 8-byte-aligned pointers.
+ *
+ * Typical usage example:
+ *
+ * extern int f(args);
+ * extern uint32_t size_of_f;
+ * int (*copied_f)(args);
+ * void *sram_buffer;
+ *
+ * copied_f = fncpy(sram_buffer, &f, size_of_f);
+ *
+ * ... later, call the function: ...
+ *
+ * copied_f(args);
+ *
+ * The size of the function to be copied can't be determined from C:
+ * this must be determined by other means, such as adding assmbler directives
+ * in the file where f is defined.
+ */
+
+#ifndef __ASM_FNCPY_H
+#define __ASM_FNCPY_H
+
+#include <linux/types.h>
+#include <linux/string.h>
+
+#include <asm/bug.h>
+#include <asm/cacheflush.h>
+
+/*
+ * Minimum alignment requirement for the source and destination addresses
+ * for function copying.
+ */
+#define FNCPY_ALIGN 8
+
+#define fncpy(dest_buf, funcp, size) ({ \
+ uintptr_t __funcp_address; \
+ typeof(funcp) __result; \
+ \
+ asm("" : "=r" (__funcp_address) : "0" (funcp)); \
+ \
+ /* \
+ * Ensure alignment of source and destination addresses, \
+ * disregarding the function's Thumb bit: \
+ */ \
+ BUG_ON((uintptr_t)(dest_buf) & (FNCPY_ALIGN - 1) || \
+ (__funcp_address & ~(uintptr_t)1 & (FNCPY_ALIGN - 1))); \
+ \
+ memcpy(dest_buf, (void const *)(__funcp_address & ~1), size); \
+ flush_icache_range((unsigned long)(dest_buf), \
+ (unsigned long)(dest_buf) + (size)); \
+ \
+ asm("" : "=r" (__result) \
+ : "0" ((uintptr_t)(dest_buf) | (__funcp_address & 1))); \
+ \
+ __result; \
+})
+
+#endif /* !__ASM_FNCPY_H */
--- /dev/null
+/*
+ * arch/arm/include/asm/glue-cache.h
+ *
+ * Copyright (C) 1999-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASM_GLUE_CACHE_H
+#define ASM_GLUE_CACHE_H
+
+#include <asm/glue.h>
+
+/*
+ * Cache Model
+ * ===========
+ */
+#undef _CACHE
+#undef MULTI_CACHE
+
+#if defined(CONFIG_CPU_CACHE_V3)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE v3
+# endif
+#endif
+
+#if defined(CONFIG_CPU_CACHE_V4)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE v4
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
+ defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020) || \
+ defined(CONFIG_CPU_ARM1026)
+# define MULTI_CACHE 1
+#endif
+
+#if defined(CONFIG_CPU_FA526)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE fa
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM926T)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE arm926
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM940T)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE arm940
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM946E)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE arm946
+# endif
+#endif
+
+#if defined(CONFIG_CPU_CACHE_V4WB)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE v4wb
+# endif
+#endif
+
+#if defined(CONFIG_CPU_XSCALE)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE xscale
+# endif
+#endif
+
+#if defined(CONFIG_CPU_XSC3)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE xsc3
+# endif
+#endif
+
+#if defined(CONFIG_CPU_MOHAWK)
+# ifdef _CACHE
+# define MULTI_CACHE 1
+# else
+# define _CACHE mohawk
+# endif
+#endif
+
+#if defined(CONFIG_CPU_FEROCEON)
+# define MULTI_CACHE 1
+#endif
+
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
+//# ifdef _CACHE
+# define MULTI_CACHE 1
+//# else
+//# define _CACHE v6
+//# endif
+#endif
+
+#if defined(CONFIG_CPU_V7)
+//# ifdef _CACHE
+# define MULTI_CACHE 1
+//# else
+//# define _CACHE v7
+//# endif
+#endif
+
+#if !defined(_CACHE) && !defined(MULTI_CACHE)
+#error Unknown cache maintainence model
+#endif
+
+#ifndef MULTI_CACHE
+#define __cpuc_flush_icache_all __glue(_CACHE,_flush_icache_all)
+#define __cpuc_flush_kern_all __glue(_CACHE,_flush_kern_cache_all)
+#define __cpuc_flush_user_all __glue(_CACHE,_flush_user_cache_all)
+#define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range)
+#define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range)
+#define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range)
+#define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area)
+
+#define dmac_map_area __glue(_CACHE,_dma_map_area)
+#define dmac_unmap_area __glue(_CACHE,_dma_unmap_area)
+#define dmac_flush_range __glue(_CACHE,_dma_flush_range)
+#endif
+
+#endif
--- /dev/null
+/*
+ * arch/arm/include/asm/glue-df.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ * Copyright (C) 2000-2002 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASM_GLUE_DF_H
+#define ASM_GLUE_DF_H
+
+#include <asm/glue.h>
+
+/*
+ * Data Abort Model
+ * ================
+ *
+ * We have the following to choose from:
+ * arm6 - ARM6 style
+ * arm7 - ARM7 style
+ * v4_early - ARMv4 without Thumb early abort handler
+ * v4t_late - ARMv4 with Thumb late abort handler
+ * v4t_early - ARMv4 with Thumb early abort handler
+ * v5tej_early - ARMv5 with Thumb and Java early abort handler
+ * xscale - ARMv5 with Thumb with Xscale extensions
+ * v6_early - ARMv6 generic early abort handler
+ * v7_early - ARMv7 generic early abort handler
+ */
+#undef CPU_DABORT_HANDLER
+#undef MULTI_DABORT
+
+#if defined(CONFIG_CPU_ARM610)
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER cpu_arm6_data_abort
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM710)
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER cpu_arm7_data_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_LV4T
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER v4t_late_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV4
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER v4_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV4T
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER v4t_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV5TJ
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER v5tj_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV5T
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER v5t_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV6
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER v6_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV7
+# ifdef CPU_DABORT_HANDLER
+# define MULTI_DABORT 1
+# else
+# define CPU_DABORT_HANDLER v7_early_abort
+# endif
+#endif
+
+#ifndef CPU_DABORT_HANDLER
+#error Unknown data abort handler type
+#endif
+
+#endif
--- /dev/null
+/*
+ * arch/arm/include/asm/glue-pf.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ * Copyright (C) 2000-2002 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASM_GLUE_PF_H
+#define ASM_GLUE_PF_H
+
+#include <asm/glue.h>
+
+/*
+ * Prefetch Abort Model
+ * ================
+ *
+ * We have the following to choose from:
+ * legacy - no IFSR, no IFAR
+ * v6 - ARMv6: IFSR, no IFAR
+ * v7 - ARMv7: IFSR and IFAR
+ */
+
+#undef CPU_PABORT_HANDLER
+#undef MULTI_PABORT
+
+#ifdef CONFIG_CPU_PABRT_LEGACY
+# ifdef CPU_PABORT_HANDLER
+# define MULTI_PABORT 1
+# else
+# define CPU_PABORT_HANDLER legacy_pabort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_PABRT_V6
+# ifdef CPU_PABORT_HANDLER
+# define MULTI_PABORT 1
+# else
+# define CPU_PABORT_HANDLER v6_pabort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_PABRT_V7
+# ifdef CPU_PABORT_HANDLER
+# define MULTI_PABORT 1
+# else
+# define CPU_PABORT_HANDLER v7_pabort
+# endif
+#endif
+
+#ifndef CPU_PABORT_HANDLER
+#error Unknown prefetch abort handler type
+#endif
+
+#endif
--- /dev/null
+/*
+ * arch/arm/include/asm/glue-proc.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASM_GLUE_PROC_H
+#define ASM_GLUE_PROC_H
+
+#include <asm/glue.h>
+
+/*
+ * Work out if we need multiple CPU support
+ */
+#undef MULTI_CPU
+#undef CPU_NAME
+
+/*
+ * CPU_NAME - the prefix for CPU related functions
+ */
+
+#ifdef CONFIG_CPU_ARM610
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm6
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM7TDMI
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm7tdmi
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM710
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm7
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM720T
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm720
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM740T
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm740
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM9TDMI
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm9tdmi
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM920T
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm920
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM922T
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm922
+# endif
+#endif
+
+#ifdef CONFIG_CPU_FA526
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_fa526
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM925T
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm925
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM926T
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm926
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM940T
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm940
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM946E
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm946
+# endif
+#endif
+
+#ifdef CONFIG_CPU_SA110
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_sa110
+# endif
+#endif
+
+#ifdef CONFIG_CPU_SA1100
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_sa1100
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM1020
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm1020
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM1020E
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm1020e
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM1022
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm1022
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ARM1026
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_arm1026
+# endif
+#endif
+
+#ifdef CONFIG_CPU_XSCALE
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_xscale
+# endif
+#endif
+
+#ifdef CONFIG_CPU_XSC3
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_xsc3
+# endif
+#endif
+
+#ifdef CONFIG_CPU_MOHAWK
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_mohawk
+# endif
+#endif
+
+#ifdef CONFIG_CPU_FEROCEON
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_feroceon
+# endif
+#endif
+
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_v6
+# endif
+#endif
+
+#ifdef CONFIG_CPU_V7
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_v7
+# endif
+#endif
+
+#ifndef MULTI_CPU
+#define cpu_proc_init __glue(CPU_NAME,_proc_init)
+#define cpu_proc_fin __glue(CPU_NAME,_proc_fin)
+#define cpu_reset __glue(CPU_NAME,_reset)
+#define cpu_do_idle __glue(CPU_NAME,_do_idle)
+#define cpu_dcache_clean_area __glue(CPU_NAME,_dcache_clean_area)
+#define cpu_do_switch_mm __glue(CPU_NAME,_switch_mm)
+#define cpu_set_pte_ext __glue(CPU_NAME,_set_pte_ext)
+#define cpu_suspend_size __glue(CPU_NAME,_suspend_size)
+#define cpu_do_suspend __glue(CPU_NAME,_do_suspend)
+#define cpu_do_resume __glue(CPU_NAME,_do_resume)
+#endif
+
+#endif
*/
#ifdef __KERNEL__
-
#ifdef __STDC__
#define ____glue(name,fn) name##fn
#else
#endif
#define __glue(name,fn) ____glue(name,fn)
-
-
-/*
- * Data Abort Model
- * ================
- *
- * We have the following to choose from:
- * arm6 - ARM6 style
- * arm7 - ARM7 style
- * v4_early - ARMv4 without Thumb early abort handler
- * v4t_late - ARMv4 with Thumb late abort handler
- * v4t_early - ARMv4 with Thumb early abort handler
- * v5tej_early - ARMv5 with Thumb and Java early abort handler
- * xscale - ARMv5 with Thumb with Xscale extensions
- * v6_early - ARMv6 generic early abort handler
- * v7_early - ARMv7 generic early abort handler
- */
-#undef CPU_DABORT_HANDLER
-#undef MULTI_DABORT
-
-#if defined(CONFIG_CPU_ARM610)
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER cpu_arm6_data_abort
-# endif
-#endif
-
-#if defined(CONFIG_CPU_ARM710)
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER cpu_arm7_data_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_LV4T
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER v4t_late_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV4
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER v4_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV4T
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER v4t_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV5TJ
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER v5tj_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV5T
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER v5t_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV6
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER v6_early_abort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ABRT_EV7
-# ifdef CPU_DABORT_HANDLER
-# define MULTI_DABORT 1
-# else
-# define CPU_DABORT_HANDLER v7_early_abort
-# endif
-#endif
-
-#ifndef CPU_DABORT_HANDLER
-#error Unknown data abort handler type
-#endif
-
-/*
- * Prefetch Abort Model
- * ================
- *
- * We have the following to choose from:
- * legacy - no IFSR, no IFAR
- * v6 - ARMv6: IFSR, no IFAR
- * v7 - ARMv7: IFSR and IFAR
- */
-
-#undef CPU_PABORT_HANDLER
-#undef MULTI_PABORT
-
-#ifdef CONFIG_CPU_PABRT_LEGACY
-# ifdef CPU_PABORT_HANDLER
-# define MULTI_PABORT 1
-# else
-# define CPU_PABORT_HANDLER legacy_pabort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_PABRT_V6
-# ifdef CPU_PABORT_HANDLER
-# define MULTI_PABORT 1
-# else
-# define CPU_PABORT_HANDLER v6_pabort
-# endif
-#endif
-
-#ifdef CONFIG_CPU_PABRT_V7
-# ifdef CPU_PABORT_HANDLER
-# define MULTI_PABORT 1
-# else
-# define CPU_PABORT_HANDLER v7_pabort
-# endif
-#endif
-
-#ifndef CPU_PABORT_HANDLER
-#error Unknown prefetch abort handler type
-#endif
-
#endif
#ifndef __ASSEMBLY__
extern void __iomem *gic_cpu_base_addr;
+extern struct irq_chip gic_arch_extn;
void gic_init(unsigned int, unsigned int, void __iomem *, void __iomem *);
void gic_secondary_init(unsigned int);
extern pte_t *pkmap_page_table;
+extern void *kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+/*
+ * The reason for kmap_high_get() is to ensure that the currently kmap'd
+ * page usage count does not decrease to zero while we're using its
+ * existing virtual mapping in an atomic context. With a VIVT cache this
+ * is essential to do, but with a VIPT cache this is only an optimization
+ * so not to pay the price of establishing a second mapping if an existing
+ * one can be used. However, on platforms without hardware TLB maintenance
+ * broadcast, we simply cannot use ARCH_NEEDS_KMAP_HIGH_GET at all since
+ * the locking involved must also disable IRQs which is incompatible with
+ * the IPI mechanism used by global TLB operations.
+ */
#define ARCH_NEEDS_KMAP_HIGH_GET
+#if defined(CONFIG_SMP) && defined(CONFIG_CPU_TLB_V6)
+#undef ARCH_NEEDS_KMAP_HIGH_GET
+#if defined(CONFIG_HIGHMEM) && defined(CONFIG_CPU_CACHE_VIVT)
+#error "The sum of features in your kernel config cannot be supported together"
+#endif
+#endif
-extern void *kmap_high(struct page *page);
+#ifdef ARCH_NEEDS_KMAP_HIGH_GET
extern void *kmap_high_get(struct page *page);
-extern void kunmap_high(struct page *page);
+#else
+static inline void *kmap_high_get(struct page *page)
+{
+ return NULL;
+}
+#endif
/*
* The following functions are already defined by <linux/highmem.h>
raw_spin_unlock(&desc->lock); \
} while(0)
+#ifndef __ASSEMBLY__
+/*
+ * Entry/exit functions for chained handlers where the primary IRQ chip
+ * may implement either fasteoi or level-trigger flow control.
+ */
+static inline void chained_irq_enter(struct irq_chip *chip,
+ struct irq_desc *desc)
+{
+ /* FastEOI controllers require no action on entry. */
+ if (chip->irq_eoi)
+ return;
+
+ if (chip->irq_mask_ack) {
+ chip->irq_mask_ack(&desc->irq_data);
+ } else {
+ chip->irq_mask(&desc->irq_data);
+ if (chip->irq_ack)
+ chip->irq_ack(&desc->irq_data);
+ }
+}
+
+static inline void chained_irq_exit(struct irq_chip *chip,
+ struct irq_desc *desc)
+{
+ if (chip->irq_eoi)
+ chip->irq_eoi(&desc->irq_data);
+ else
+ chip->irq_unmask(&desc->irq_data);
+}
+#endif
+
#endif
#include <linux/compiler.h>
#include <linux/const.h>
+#include <linux/types.h>
#include <mach/memory.h>
#include <asm/sizes.h>
#define DTCM_OFFSET UL(0xfffe8000)
#endif
-/*
- * Physical vs virtual RAM address space conversion. These are
- * private definitions which should NOT be used outside memory.h
- * files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
- */
-#ifndef __virt_to_phys
-#define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
-#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET)
-#endif
-
/*
* Convert a physical address to a Page Frame Number and back
*/
-#define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT)
-#define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT)
+#define __phys_to_pfn(paddr) ((unsigned long)((paddr) >> PAGE_SHIFT))
+#define __pfn_to_phys(pfn) ((phys_addr_t)(pfn) << PAGE_SHIFT)
/*
* Convert a page to/from a physical address
#ifndef __ASSEMBLY__
+/*
+ * Physical vs virtual RAM address space conversion. These are
+ * private definitions which should NOT be used outside memory.h
+ * files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
+ */
+#ifndef __virt_to_phys
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+
+/*
+ * Constants used to force the right instruction encodings and shifts
+ * so that all we need to do is modify the 8-bit constant field.
+ */
+#define __PV_BITS_31_24 0x81000000
+#define __PV_BITS_23_16 0x00810000
+
+extern unsigned long __pv_phys_offset;
+#define PHYS_OFFSET __pv_phys_offset
+
+#define __pv_stub(from,to,instr,type) \
+ __asm__("@ __pv_stub\n" \
+ "1: " instr " %0, %1, %2\n" \
+ " .pushsection .pv_table,\"a\"\n" \
+ " .long 1b\n" \
+ " .popsection\n" \
+ : "=r" (to) \
+ : "r" (from), "I" (type))
+
+static inline unsigned long __virt_to_phys(unsigned long x)
+{
+ unsigned long t;
+ __pv_stub(x, t, "add", __PV_BITS_31_24);
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
+ __pv_stub(t, t, "add", __PV_BITS_23_16);
+#endif
+ return t;
+}
+
+static inline unsigned long __phys_to_virt(unsigned long x)
+{
+ unsigned long t;
+ __pv_stub(x, t, "sub", __PV_BITS_31_24);
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
+ __pv_stub(t, t, "sub", __PV_BITS_23_16);
+#endif
+ return t;
+}
+#else
+#define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
+#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET)
+#endif
+#endif
+
+#ifndef PHYS_OFFSET
+#define PHYS_OFFSET PLAT_PHYS_OFFSET
+#endif
+
/*
* The DMA mask corresponding to the maximum bus address allocatable
* using GFP_DMA. The default here places no restriction on DMA
* translation for translating DMA addresses. Use the driver
* DMA support - see dma-mapping.h.
*/
-static inline unsigned long virt_to_phys(const volatile void *x)
+static inline phys_addr_t virt_to_phys(const volatile void *x)
{
return __virt_to_phys((unsigned long)(x));
}
-static inline void *phys_to_virt(unsigned long x)
+static inline void *phys_to_virt(phys_addr_t x)
{
return (void *)(__phys_to_virt((unsigned long)(x)));
}
};
/*
- * Include the ARM architecture version.
+ * Add the ARM architecture version to the version magic string
*/
-#define MODULE_ARCH_VERMAGIC "ARMv" __stringify(__LINUX_ARM_ARCH__) " "
+#define MODULE_ARCH_VERMAGIC_ARMVSN "ARMv" __stringify(__LINUX_ARM_ARCH__) " "
+
+/* Add __virt_to_phys patching state as well */
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
+#define MODULE_ARCH_VERMAGIC_P2V "p2v16 "
+#else
+#define MODULE_ARCH_VERMAGIC_P2V "p2v8 "
+#endif
+#else
+#define MODULE_ARCH_VERMAGIC_P2V ""
+#endif
+
+/* Add instruction set architecture tag to distinguish ARM/Thumb kernels */
+#ifdef CONFIG_THUMB2_KERNEL
+#define MODULE_ARCH_VERMAGIC_ARMTHUMB "thumb2 "
+#else
+#define MODULE_ARCH_VERMAGIC_ARMTHUMB ""
+#endif
+
+#define MODULE_ARCH_VERMAGIC \
+ MODULE_ARCH_VERMAGIC_ARMVSN \
+ MODULE_ARCH_VERMAGIC_ARMTHUMB \
+ MODULE_ARCH_VERMAGIC_P2V
#endif /* _ASM_ARM_MODULE_H */
#ifdef CONFIG_OUTER_CACHE_SYNC
void (*sync)(void);
#endif
+ void (*set_debug)(unsigned long);
};
#ifdef CONFIG_OUTER_CACHE
#ifdef __KERNEL__
+#include <asm/glue-proc.h>
+#include <asm/page.h>
-/*
- * Work out if we need multiple CPU support
- */
-#undef MULTI_CPU
-#undef CPU_NAME
+#ifndef __ASSEMBLY__
+
+struct mm_struct;
/*
- * CPU_NAME - the prefix for CPU related functions
+ * Don't change this structure - ASM code relies on it.
*/
-
-#ifdef CONFIG_CPU_ARM610
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm6
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM7TDMI
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm7tdmi
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM710
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm7
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM720T
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm720
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM740T
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm740
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM9TDMI
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm9tdmi
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM920T
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm920
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM922T
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm922
-# endif
-#endif
-
-#ifdef CONFIG_CPU_FA526
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_fa526
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM925T
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm925
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM926T
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm926
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM940T
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm940
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM946E
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm946
-# endif
-#endif
-
-#ifdef CONFIG_CPU_SA110
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_sa110
-# endif
-#endif
-
-#ifdef CONFIG_CPU_SA1100
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_sa1100
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM1020
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm1020
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM1020E
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm1020e
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM1022
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm1022
-# endif
-#endif
-
-#ifdef CONFIG_CPU_ARM1026
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm1026
-# endif
-#endif
-
-#ifdef CONFIG_CPU_XSCALE
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_xscale
-# endif
-#endif
-
-#ifdef CONFIG_CPU_XSC3
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_xsc3
-# endif
-#endif
-
-#ifdef CONFIG_CPU_MOHAWK
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_mohawk
-# endif
-#endif
-
-#ifdef CONFIG_CPU_FEROCEON
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_feroceon
-# endif
-#endif
-
-#ifdef CONFIG_CPU_V6
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_v6
-# endif
-#endif
-
-#ifdef CONFIG_CPU_V7
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_v7
-# endif
-#endif
-
-#ifndef __ASSEMBLY__
+extern struct processor {
+ /* MISC
+ * get data abort address/flags
+ */
+ void (*_data_abort)(unsigned long pc);
+ /*
+ * Retrieve prefetch fault address
+ */
+ unsigned long (*_prefetch_abort)(unsigned long lr);
+ /*
+ * Set up any processor specifics
+ */
+ void (*_proc_init)(void);
+ /*
+ * Disable any processor specifics
+ */
+ void (*_proc_fin)(void);
+ /*
+ * Special stuff for a reset
+ */
+ void (*reset)(unsigned long addr) __attribute__((noreturn));
+ /*
+ * Idle the processor
+ */
+ int (*_do_idle)(void);
+ /*
+ * Processor architecture specific
+ */
+ /*
+ * clean a virtual address range from the
+ * D-cache without flushing the cache.
+ */
+ void (*dcache_clean_area)(void *addr, int size);
+
+ /*
+ * Set the page table
+ */
+ void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm);
+ /*
+ * Set a possibly extended PTE. Non-extended PTEs should
+ * ignore 'ext'.
+ */
+ void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext);
+
+ /* Suspend/resume */
+ unsigned int suspend_size;
+ void (*do_suspend)(void *);
+ void (*do_resume)(void *);
+} processor;
#ifndef MULTI_CPU
-#include <asm/cpu-single.h>
+extern void cpu_proc_init(void);
+extern void cpu_proc_fin(void);
+extern int cpu_do_idle(void);
+extern void cpu_dcache_clean_area(void *, int);
+extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
+extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
#else
-#include <asm/cpu-multi32.h>
+#define cpu_proc_init() processor._proc_init()
+#define cpu_proc_fin() processor._proc_fin()
+#define cpu_reset(addr) processor.reset(addr)
+#define cpu_do_idle() processor._do_idle()
+#define cpu_dcache_clean_area(addr,sz) processor.dcache_clean_area(addr,sz)
+#define cpu_set_pte_ext(ptep,pte,ext) processor.set_pte_ext(ptep,pte,ext)
+#define cpu_do_switch_mm(pgd,mm) processor.switch_mm(pgd,mm)
#endif
+extern void cpu_resume(void);
+
#include <asm/memory.h>
#ifdef CONFIG_MMU
#define STACK_TOP_MAX TASK_SIZE
#endif
-union debug_insn {
- u32 arm;
- u16 thumb;
-};
-
-struct debug_entry {
- u32 address;
- union debug_insn insn;
-};
-
struct debug_info {
- int nsaved;
- struct debug_entry bp[2];
#ifdef CONFIG_HAVE_HW_BREAKPOINT
struct perf_event *hbp[ARM_MAX_HBP_SLOTS];
#endif
unsigned long get_wchan(struct task_struct *p);
-#if __LINUX_ARM_ARCH__ == 6
+#if __LINUX_ARM_ARCH__ == 6 || defined(CONFIG_ARM_ERRATA_754327)
#define cpu_relax() smp_mb()
#else
#define cpu_relax() barrier()
#ifdef __KERNEL__
-#define arch_has_single_step() (1)
-
#define user_mode(regs) \
(((regs)->ARM_cpsr & 0xf) == 0)
#ifndef __ASMARM_ARCH_SCU_H
#define __ASMARM_ARCH_SCU_H
+#define SCU_PM_NORMAL 0
+#define SCU_PM_DORMANT 2
+#define SCU_PM_POWEROFF 3
+
+#ifndef __ASSEMBLER__
unsigned int scu_get_core_count(void __iomem *);
void scu_enable(void __iomem *);
+int scu_power_mode(void __iomem *, unsigned int);
+#endif
#endif
#error SMP not supported on pre-ARMv6 CPUs
#endif
+/*
+ * sev and wfe are ARMv6K extensions. Uniprocessor ARMv6 may not have the K
+ * extensions, so when running on UP, we have to patch these instructions away.
+ */
+#define ALT_SMP(smp, up) \
+ "9998: " smp "\n" \
+ " .pushsection \".alt.smp.init\", \"a\"\n" \
+ " .long 9998b\n" \
+ " " up "\n" \
+ " .popsection\n"
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define SEV ALT_SMP("sev.w", "nop.w")
+/*
+ * For Thumb-2, special care is needed to ensure that the conditional WFE
+ * instruction really does assemble to exactly 4 bytes (as required by
+ * the SMP_ON_UP fixup code). By itself "wfene" might cause the
+ * assembler to insert a extra (16-bit) IT instruction, depending on the
+ * presence or absence of neighbouring conditional instructions.
+ *
+ * To avoid this unpredictableness, an approprite IT is inserted explicitly:
+ * the assembler won't change IT instructions which are explicitly present
+ * in the input.
+ */
+#define WFE(cond) ALT_SMP( \
+ "it " cond "\n\t" \
+ "wfe" cond ".n", \
+ \
+ "nop.w" \
+)
+#else
+#define SEV ALT_SMP("sev", "nop")
+#define WFE(cond) ALT_SMP("wfe" cond, "nop")
+#endif
+
static inline void dsb_sev(void)
{
#if __LINUX_ARM_ARCH__ >= 7
__asm__ __volatile__ (
"dsb\n"
- "sev"
+ SEV
);
-#elif defined(CONFIG_CPU_32v6K)
+#else
__asm__ __volatile__ (
"mcr p15, 0, %0, c7, c10, 4\n"
- "sev"
+ SEV
: : "r" (0)
);
#endif
__asm__ __volatile__(
"1: ldrex %0, [%1]\n"
" teq %0, #0\n"
-#ifdef CONFIG_CPU_32v6K
-" wfene\n"
-#endif
+ WFE("ne")
" strexeq %0, %2, [%1]\n"
" teqeq %0, #0\n"
" bne 1b"
__asm__ __volatile__(
"1: ldrex %0, [%1]\n"
" teq %0, #0\n"
-#ifdef CONFIG_CPU_32v6K
-" wfene\n"
-#endif
+ WFE("ne")
" strexeq %0, %2, [%1]\n"
" teq %0, #0\n"
" bne 1b"
"1: ldrex %0, [%2]\n"
" adds %0, %0, #1\n"
" strexpl %1, %0, [%2]\n"
-#ifdef CONFIG_CPU_32v6K
-" wfemi\n"
-#endif
+ WFE("mi")
" rsbpls %0, %1, #0\n"
" bmi 1b"
: "=&r" (tmp), "=&r" (tmp2)
#include <asm-generic/cmpxchg-local.h>
#if __LINUX_ARM_ARCH__ < 6
+/* min ARCH < ARMv6 */
#ifdef CONFIG_SMP
#error "SMP is not supported on this platform"
#include <asm-generic/cmpxchg.h>
#endif
-#else /* __LINUX_ARM_ARCH__ >= 6 */
+#else /* min ARCH >= ARMv6 */
extern void __bad_cmpxchg(volatile void *ptr, int size);
unsigned long oldval, res;
switch (size) {
-#ifdef CONFIG_CPU_32v6K
+#ifndef CONFIG_CPU_V6 /* min ARCH >= ARMv6K */
case 1:
do {
asm volatile("@ __cmpxchg1\n"
: "memory", "cc");
} while (res);
break;
-#endif /* CONFIG_CPU_32v6K */
+#endif
case 4:
do {
asm volatile("@ __cmpxchg4\n"
unsigned long ret;
switch (size) {
-#ifndef CONFIG_CPU_32v6K
+#ifdef CONFIG_CPU_V6 /* min ARCH == ARMv6 */
case 1:
case 2:
ret = __cmpxchg_local_generic(ptr, old, new, size);
break;
-#endif /* !CONFIG_CPU_32v6K */
+#endif
default:
ret = __cmpxchg(ptr, old, new, size);
}
(unsigned long)(n), \
sizeof(*(ptr))))
-#ifdef CONFIG_CPU_32v6K
+#ifndef CONFIG_CPU_V6 /* min ARCH >= ARMv6K */
/*
* Note : ARMv7-M (currently unsupported by Linux) does not support
(unsigned long long)(o), \
(unsigned long long)(n)))
-#else /* !CONFIG_CPU_32v6K */
+#else /* min ARCH = ARMv6 */
#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-#endif /* CONFIG_CPU_32v6K */
+#endif
#endif /* __LINUX_ARM_ARCH__ >= 6 */
#define tls_emu 1
#define has_tls_reg 1
#define set_tls set_tls_none
-#elif __LINUX_ARM_ARCH__ >= 7 || \
- (__LINUX_ARM_ARCH__ == 6 && defined(CONFIG_CPU_32v6K))
-#define tls_emu 0
-#define has_tls_reg 1
-#define set_tls set_tls_v6k
-#elif __LINUX_ARM_ARCH__ == 6
+#elif defined(CONFIG_CPU_V6)
#define tls_emu 0
#define has_tls_reg (elf_hwcap & HWCAP_TLS)
#define set_tls set_tls_v6
+#elif defined(CONFIG_CPU_32v6K)
+#define tls_emu 0
+#define has_tls_reg 1
+#define set_tls set_tls_v6k
#else
#define tls_emu 0
#define has_tls_reg 0
extern void __init early_trap_init(void);
extern void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame);
+extern void ptrace_break(struct task_struct *tsk, struct pt_regs *regs);
extern void *vectors_page;
/* the registers. */
unsigned long magic; /* To uniquely identify a core file */
char u_comm[32]; /* User command that was responsible */
- int u_debugreg[8];
+ int u_debugreg[8]; /* No longer used */
struct user_fp u_fp; /* FP state */
struct user_fp_struct * u_fp0;/* Used by gdb to help find the values for */
/* the FP registers. */
obj-$(CONFIG_ARTHUR) += arthur.o
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
+obj-$(CONFIG_PM) += sleep.o
obj-$(CONFIG_HAVE_SCHED_CLOCK) += sched_clock.o
obj-$(CONFIG_SMP) += smp.o smp_tlb.o
obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o
#endif
/* bitops */
-EXPORT_SYMBOL(_set_bit_le);
-EXPORT_SYMBOL(_test_and_set_bit_le);
-EXPORT_SYMBOL(_clear_bit_le);
-EXPORT_SYMBOL(_test_and_clear_bit_le);
-EXPORT_SYMBOL(_change_bit_le);
-EXPORT_SYMBOL(_test_and_change_bit_le);
+EXPORT_SYMBOL(_set_bit);
+EXPORT_SYMBOL(_test_and_set_bit);
+EXPORT_SYMBOL(_clear_bit);
+EXPORT_SYMBOL(_test_and_clear_bit);
+EXPORT_SYMBOL(_change_bit);
+EXPORT_SYMBOL(_test_and_change_bit);
EXPORT_SYMBOL(_find_first_zero_bit_le);
EXPORT_SYMBOL(_find_next_zero_bit_le);
EXPORT_SYMBOL(_find_first_bit_le);
EXPORT_SYMBOL(_find_next_bit_le);
#ifdef __ARMEB__
-EXPORT_SYMBOL(_set_bit_be);
-EXPORT_SYMBOL(_test_and_set_bit_be);
-EXPORT_SYMBOL(_clear_bit_be);
-EXPORT_SYMBOL(_test_and_clear_bit_be);
-EXPORT_SYMBOL(_change_bit_be);
-EXPORT_SYMBOL(_test_and_change_bit_be);
EXPORT_SYMBOL(_find_first_zero_bit_be);
EXPORT_SYMBOL(_find_next_zero_bit_be);
EXPORT_SYMBOL(_find_first_bit_be);
#endif
EXPORT_SYMBOL(__gnu_mcount_nc);
#endif
+
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+EXPORT_SYMBOL(__pv_phys_offset);
+#endif
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
+#include <asm/cacheflush.h>
+#include <asm/glue-df.h>
+#include <asm/glue-pf.h>
#include <asm/mach/arch.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
#endif
#ifdef MULTI_PABORT
DEFINE(PROCESSOR_PABT_FUNC, offsetof(struct processor, _prefetch_abort));
+#endif
+#ifdef MULTI_CPU
+ DEFINE(CPU_SLEEP_SIZE, offsetof(struct processor, suspend_size));
+ DEFINE(CPU_DO_SUSPEND, offsetof(struct processor, do_suspend));
+ DEFINE(CPU_DO_RESUME, offsetof(struct processor, do_resume));
+#endif
+#ifdef MULTI_CACHE
+ DEFINE(CACHE_FLUSH_KERN_ALL, offsetof(struct cpu_cache_fns, flush_kern_all));
#endif
BLANK();
DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL);
* Assign resources.
*/
pci_bus_assign_resources(bus);
+
+ /*
+ * Enable bridges
+ */
+ pci_enable_bridges(bus);
}
/*
.macro addruart, rp, rv
.endm
-#if defined(CONFIG_CPU_V6)
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
.macro senduart, rd, rx
mcr p14, 0, \rd, c0, c5, 0
*/
#include <asm/memory.h>
-#include <asm/glue.h>
+#include <asm/glue-df.h>
+#include <asm/glue-pf.h>
#include <asm/vfpmacros.h>
#include <mach/entry-macro.S>
#include <asm/thread_notify.h>
#ifndef CONFIG_THUMB2_KERNEL
.macro svc_exit, rpsr
msr spsr_cxsf, \rpsr
-#if defined(CONFIG_CPU_32v6K)
- clrex @ clear the exclusive monitor
- ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
-#elif defined (CONFIG_CPU_V6)
+#if defined(CONFIG_CPU_V6)
ldr r0, [sp]
strex r1, r2, [sp] @ clear the exclusive monitor
ldmib sp, {r1 - pc}^ @ load r1 - pc, cpsr
+#elif defined(CONFIG_CPU_32v6K)
+ clrex @ clear the exclusive monitor
+ ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
#else
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
#endif
ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
ldr lr, [sp, #\offset + S_PC]! @ get pc
msr spsr_cxsf, r1 @ save in spsr_svc
-#if defined(CONFIG_CPU_32v6K)
- clrex @ clear the exclusive monitor
-#elif defined (CONFIG_CPU_V6)
+#if defined(CONFIG_CPU_V6)
strex r1, r2, [sp] @ clear the exclusive monitor
+#elif defined(CONFIG_CPU_32v6K)
+ clrex @ clear the exclusive monitor
#endif
.if \fast
ldmdb sp, {r1 - lr}^ @ get calling r1 - lr
* machine ID for example).
*/
__HEAD
-__error_a:
-#ifdef CONFIG_DEBUG_LL
- mov r4, r1 @ preserve machine ID
- adr r0, str_a1
- bl printascii
- mov r0, r4
- bl printhex8
- adr r0, str_a2
- bl printascii
- adr r3, __lookup_machine_type_data
- ldmia r3, {r4, r5, r6} @ get machine desc list
- sub r4, r3, r4 @ get offset between virt&phys
- add r5, r5, r4 @ convert virt addresses to
- add r6, r6, r4 @ physical address space
-1: ldr r0, [r5, #MACHINFO_TYPE] @ get machine type
- bl printhex8
- mov r0, #'\t'
- bl printch
- ldr r0, [r5, #MACHINFO_NAME] @ get machine name
- add r0, r0, r4
- bl printascii
- mov r0, #'\n'
- bl printch
- add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc
- cmp r5, r6
- blo 1b
- adr r0, str_a3
- bl printascii
- b __error
-ENDPROC(__error_a)
-
-str_a1: .asciz "\nError: unrecognized/unsupported machine ID (r1 = 0x"
-str_a2: .asciz ").\n\nAvailable machine support:\n\nID (hex)\tNAME\n"
-str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n"
- .align
-#else
- b __error
-#endif
-
-/*
- * Lookup machine architecture in the linker-build list of architectures.
- * Note that we can't use the absolute addresses for the __arch_info
- * lists since we aren't running with the MMU on (and therefore, we are
- * not in the correct address space). We have to calculate the offset.
- *
- * r1 = machine architecture number
- * Returns:
- * r3, r4, r6 corrupted
- * r5 = mach_info pointer in physical address space
- */
-__lookup_machine_type:
- adr r3, __lookup_machine_type_data
- ldmia r3, {r4, r5, r6}
- sub r3, r3, r4 @ get offset between virt&phys
- add r5, r5, r3 @ convert virt addresses to
- add r6, r6, r3 @ physical address space
-1: ldr r3, [r5, #MACHINFO_TYPE] @ get machine type
- teq r3, r1 @ matches loader number?
- beq 2f @ found
- add r5, r5, #SIZEOF_MACHINE_DESC @ next machine_desc
- cmp r5, r6
- blo 1b
- mov r5, #0 @ unknown machine
-2: mov pc, lr
-ENDPROC(__lookup_machine_type)
-
-/*
- * Look in arch/arm/kernel/arch.[ch] for information about the
- * __arch_info structures.
- */
- .align 2
- .type __lookup_machine_type_data, %object
-__lookup_machine_type_data:
- .long .
- .long __arch_info_begin
- .long __arch_info_end
- .size __lookup_machine_type_data, . - __lookup_machine_type_data
/* Determine validity of the r2 atags pointer. The heuristic requires
* that the pointer be aligned, in the first 16k of physical RAM and
* of this function may be more lenient with the physical address and
* may also be able to move the ATAGS block if necessary.
*
- * r8 = machinfo
- *
* Returns:
* r2 either valid atags pointer, or zero
* r5, r6 corrupted
.long init_thread_union + THREAD_START_SP @ sp
.size __mmap_switched_data, . - __mmap_switched_data
-/*
- * This provides a C-API version of __lookup_machine_type
- */
-ENTRY(lookup_machine_type)
- stmfd sp!, {r4 - r6, lr}
- mov r1, r0
- bl __lookup_machine_type
- mov r0, r5
- ldmfd sp!, {r4 - r6, pc}
-ENDPROC(lookup_machine_type)
-
/*
* This provides a C-API version of __lookup_processor_type
*/
bl __lookup_processor_type @ r5=procinfo r9=cpuid
movs r10, r5 @ invalid processor (r5=0)?
beq __error_p @ yes, error 'p'
- bl __lookup_machine_type @ r5=machinfo
- movs r8, r5 @ invalid machine (r5=0)?
- beq __error_a @ yes, error 'a'
adr lr, BSYM(__after_proc_init) @ return (PIC) address
ARM( add pc, r10, #PROCINFO_INITFUNC )
#include <mach/debug-macro.S>
#endif
-#if (PHYS_OFFSET & 0x001fffff)
-#error "PHYS_OFFSET must be at an even 2MiB boundary!"
-#endif
-
-#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET)
-#define KERNEL_RAM_PADDR (PHYS_OFFSET + TEXT_OFFSET)
-
-
/*
* swapper_pg_dir is the virtual address of the initial page table.
* We place the page tables 16K below KERNEL_RAM_VADDR. Therefore, we must
* the least significant 16 bits to be 0x8000, but we could probably
* relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x4000.
*/
+#define KERNEL_RAM_VADDR (PAGE_OFFSET + TEXT_OFFSET)
#if (KERNEL_RAM_VADDR & 0xffff) != 0x8000
#error KERNEL_RAM_VADDR must start at 0xXXXX8000
#endif
.globl swapper_pg_dir
.equ swapper_pg_dir, KERNEL_RAM_VADDR - 0x4000
- .macro pgtbl, rd
- ldr \rd, =(KERNEL_RAM_PADDR - 0x4000)
+ .macro pgtbl, rd, phys
+ add \rd, \phys, #TEXT_OFFSET - 0x4000
.endm
#ifdef CONFIG_XIP_KERNEL
movs r10, r5 @ invalid processor (r5=0)?
THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_p @ yes, error 'p'
- bl __lookup_machine_type @ r5=machinfo
- movs r8, r5 @ invalid machine (r5=0)?
- THUMB( it eq ) @ force fixup-able long branch encoding
- beq __error_a @ yes, error 'a'
+
+#ifndef CONFIG_XIP_KERNEL
+ adr r3, 2f
+ ldmia r3, {r4, r8}
+ sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET)
+ add r8, r8, r4 @ PHYS_OFFSET
+#else
+ ldr r8, =PLAT_PHYS_OFFSET
+#endif
/*
* r1 = machine no, r2 = atags,
- * r8 = machinfo, r9 = cpuid, r10 = procinfo
+ * r8 = phys_offset, r9 = cpuid, r10 = procinfo
*/
bl __vet_atags
#ifdef CONFIG_SMP_ON_UP
bl __fixup_smp
+#endif
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+ bl __fixup_pv_table
#endif
bl __create_page_tables
/*
* The following calls CPU specific code in a position independent
* manner. See arch/arm/mm/proc-*.S for details. r10 = base of
- * xxx_proc_info structure selected by __lookup_machine_type
+ * xxx_proc_info structure selected by __lookup_processor_type
* above. On return, the CPU will be ready for the MMU to be
* turned on, and r0 will hold the CPU control register value.
*/
1: b __enable_mmu
ENDPROC(stext)
.ltorg
+#ifndef CONFIG_XIP_KERNEL
+2: .long .
+ .long PAGE_OFFSET
+#endif
/*
* Setup the initial page tables. We only setup the barest
* amount which are required to get the kernel running, which
* generally means mapping in the kernel code.
*
- * r8 = machinfo
- * r9 = cpuid
- * r10 = procinfo
+ * r8 = phys_offset, r9 = cpuid, r10 = procinfo
*
* Returns:
* r0, r3, r5-r7 corrupted
* r4 = physical page table address
*/
__create_page_tables:
- pgtbl r4 @ page table address
+ pgtbl r4, r8 @ page table address
/*
* Clear the 16K level 1 swapper page table
/*
* Map some ram to cover our .data and .bss areas.
*/
- orr r3, r7, #(KERNEL_RAM_PADDR & 0xff000000)
- .if (KERNEL_RAM_PADDR & 0x00f00000)
- orr r3, r3, #(KERNEL_RAM_PADDR & 0x00f00000)
- .endif
+ add r3, r8, #TEXT_OFFSET
+ orr r3, r3, r7
add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> 18
str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> 18]!
ldr r6, =(_end - 1)
#endif
/*
- * Then map first 1MB of ram in case it contains our boot params.
+ * Then map boot params address in r2 or
+ * the first 1MB of ram if boot params address is not specified.
*/
- add r0, r4, #PAGE_OFFSET >> 18
- orr r6, r7, #(PHYS_OFFSET & 0xff000000)
- .if (PHYS_OFFSET & 0x00f00000)
- orr r6, r6, #(PHYS_OFFSET & 0x00f00000)
- .endif
- str r6, [r0]
+ mov r0, r2, lsr #20
+ movs r0, r0, lsl #20
+ moveq r0, r8
+ sub r3, r0, r8
+ add r3, r3, #PAGE_OFFSET
+ add r3, r4, r3, lsr #18
+ orr r6, r7, r0
+ str r6, [r3]
#ifdef CONFIG_DEBUG_LL
#ifndef CONFIG_DEBUG_ICEDCC
ldmfd sp!, {r4 - r6, pc}
ENDPROC(fixup_smp)
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+
+/* __fixup_pv_table - patch the stub instructions with the delta between
+ * PHYS_OFFSET and PAGE_OFFSET, which is assumed to be 16MiB aligned and
+ * can be expressed by an immediate shifter operand. The stub instruction
+ * has a form of '(add|sub) rd, rn, #imm'.
+ */
+ __HEAD
+__fixup_pv_table:
+ adr r0, 1f
+ ldmia r0, {r3-r5, r7}
+ sub r3, r0, r3 @ PHYS_OFFSET - PAGE_OFFSET
+ add r4, r4, r3 @ adjust table start address
+ add r5, r5, r3 @ adjust table end address
+ add r7, r7, r3 @ adjust __pv_phys_offset address
+ str r8, [r7] @ save computed PHYS_OFFSET to __pv_phys_offset
+#ifndef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
+ mov r6, r3, lsr #24 @ constant for add/sub instructions
+ teq r3, r6, lsl #24 @ must be 16MiB aligned
+#else
+ mov r6, r3, lsr #16 @ constant for add/sub instructions
+ teq r3, r6, lsl #16 @ must be 64kiB aligned
+#endif
+THUMB( it ne @ cross section branch )
+ bne __error
+ str r6, [r7, #4] @ save to __pv_offset
+ b __fixup_a_pv_table
+ENDPROC(__fixup_pv_table)
+
+ .align
+1: .long .
+ .long __pv_table_begin
+ .long __pv_table_end
+2: .long __pv_phys_offset
+
+ .text
+__fixup_a_pv_table:
+#ifdef CONFIG_THUMB2_KERNEL
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
+ lsls r0, r6, #24
+ lsr r6, #8
+ beq 1f
+ clz r7, r0
+ lsr r0, #24
+ lsl r0, r7
+ bic r0, 0x0080
+ lsrs r7, #1
+ orrcs r0, #0x0080
+ orr r0, r0, r7, lsl #12
+#endif
+1: lsls r6, #24
+ beq 4f
+ clz r7, r6
+ lsr r6, #24
+ lsl r6, r7
+ bic r6, #0x0080
+ lsrs r7, #1
+ orrcs r6, #0x0080
+ orr r6, r6, r7, lsl #12
+ orr r6, #0x4000
+ b 4f
+2: @ at this point the C flag is always clear
+ add r7, r3
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
+ ldrh ip, [r7]
+ tst ip, 0x0400 @ the i bit tells us LS or MS byte
+ beq 3f
+ cmp r0, #0 @ set C flag, and ...
+ biceq ip, 0x0400 @ immediate zero value has a special encoding
+ streqh ip, [r7] @ that requires the i bit cleared
+#endif
+3: ldrh ip, [r7, #2]
+ and ip, 0x8f00
+ orrcc ip, r6 @ mask in offset bits 31-24
+ orrcs ip, r0 @ mask in offset bits 23-16
+ strh ip, [r7, #2]
+4: cmp r4, r5
+ ldrcc r7, [r4], #4 @ use branch for delay slot
+ bcc 2b
+ bx lr
+#else
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
+ and r0, r6, #255 @ offset bits 23-16
+ mov r6, r6, lsr #8 @ offset bits 31-24
+#else
+ mov r0, #0 @ just in case...
+#endif
+ b 3f
+2: ldr ip, [r7, r3]
+ bic ip, ip, #0x000000ff
+ tst ip, #0x400 @ rotate shift tells us LS or MS byte
+ orrne ip, ip, r6 @ mask in offset bits 31-24
+ orreq ip, ip, r0 @ mask in offset bits 23-16
+ str ip, [r7, r3]
+3: cmp r4, r5
+ ldrcc r7, [r4], #4 @ use branch for delay slot
+ bcc 2b
+ mov pc, lr
+#endif
+ENDPROC(__fixup_a_pv_table)
+
+ENTRY(fixup_pv_table)
+ stmfd sp!, {r4 - r7, lr}
+ ldr r2, 2f @ get address of __pv_phys_offset
+ mov r3, #0 @ no offset
+ mov r4, r0 @ r0 = table start
+ add r5, r0, r1 @ r1 = table size
+ ldr r6, [r2, #4] @ get __pv_offset
+ bl __fixup_a_pv_table
+ ldmfd sp!, {r4 - r7, pc}
+ENDPROC(fixup_pv_table)
+
+ .align
+2: .long __pv_phys_offset
+
+ .data
+ .globl __pv_phys_offset
+ .type __pv_phys_offset, %object
+__pv_phys_offset:
+ .long 0
+ .size __pv_phys_offset, . - __pv_phys_offset
+__pv_offset:
+ .long 0
+#endif
+
#include "head-common.S"
#ifdef CONFIG_HOTPLUG_CPU
-static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu)
+static bool migrate_one_irq(struct irq_data *d)
{
- pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->irq_data.node, cpu);
+ unsigned int cpu = cpumask_any_and(d->affinity, cpu_online_mask);
+ bool ret = false;
- raw_spin_lock_irq(&desc->lock);
- desc->irq_data.chip->irq_set_affinity(&desc->irq_data,
- cpumask_of(cpu), false);
- raw_spin_unlock_irq(&desc->lock);
+ if (cpu >= nr_cpu_ids) {
+ cpu = cpumask_any(cpu_online_mask);
+ ret = true;
+ }
+
+ pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", d->irq, d->node, cpu);
+
+ d->chip->irq_set_affinity(d, cpumask_of(cpu), true);
+
+ return ret;
}
/*
{
unsigned int i, cpu = smp_processor_id();
struct irq_desc *desc;
+ unsigned long flags;
+
+ local_irq_save(flags);
for_each_irq_desc(i, desc) {
struct irq_data *d = &desc->irq_data;
+ bool affinity_broken = false;
- if (d->node == cpu) {
- unsigned int newcpu = cpumask_any_and(d->affinity,
- cpu_online_mask);
- if (newcpu >= nr_cpu_ids) {
- if (printk_ratelimit())
- printk(KERN_INFO "IRQ%u no longer affine to CPU%u\n",
- i, cpu);
+ raw_spin_lock(&desc->lock);
+ do {
+ if (desc->action == NULL)
+ break;
- cpumask_setall(d->affinity);
- newcpu = cpumask_any_and(d->affinity,
- cpu_online_mask);
- }
+ if (d->node != cpu)
+ break;
- route_irq(desc, i, newcpu);
- }
+ affinity_broken = migrate_one_irq(d);
+ } while (0);
+ raw_spin_unlock(&desc->lock);
+
+ if (affinity_broken && printk_ratelimit())
+ pr_warning("IRQ%u no longer affine to CPU%u\n", i, cpu);
}
+
+ local_irq_restore(flags);
}
#endif /* CONFIG_HOTPLUG_CPU */
for (i = 0; i < relsec->sh_size / sizeof(Elf32_Rel); i++, rel++) {
unsigned long loc;
Elf32_Sym *sym;
+ const char *symname;
s32 offset;
#ifdef CONFIG_THUMB2_KERNEL
u32 upper, lower, sign, j1, j2;
offset = ELF32_R_SYM(rel->r_info);
if (offset < 0 || offset > (symsec->sh_size / sizeof(Elf32_Sym))) {
- printk(KERN_ERR "%s: bad relocation, section %d reloc %d\n",
+ pr_err("%s: section %u reloc %u: bad relocation sym offset\n",
module->name, relindex, i);
return -ENOEXEC;
}
sym = ((Elf32_Sym *)symsec->sh_addr) + offset;
+ symname = strtab + sym->st_name;
if (rel->r_offset < 0 || rel->r_offset > dstsec->sh_size - sizeof(u32)) {
- printk(KERN_ERR "%s: out of bounds relocation, "
- "section %d reloc %d offset %d size %d\n",
- module->name, relindex, i, rel->r_offset,
- dstsec->sh_size);
+ pr_err("%s: section %u reloc %u sym '%s': out of bounds relocation, offset %d size %u\n",
+ module->name, relindex, i, symname,
+ rel->r_offset, dstsec->sh_size);
return -ENOEXEC;
}
if (offset & 3 ||
offset <= (s32)0xfe000000 ||
offset >= (s32)0x02000000) {
- printk(KERN_ERR
- "%s: relocation out of range, section "
- "%d reloc %d sym '%s'\n", module->name,
- relindex, i, strtab + sym->st_name);
+ pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",
+ module->name, relindex, i, symname,
+ ELF32_R_TYPE(rel->r_info), loc,
+ sym->st_value);
return -ENOEXEC;
}
if (!(offset & 1) ||
offset <= (s32)0xff000000 ||
offset >= (s32)0x01000000) {
- printk(KERN_ERR
- "%s: relocation out of range, section "
- "%d reloc %d sym '%s'\n", module->name,
- relindex, i, strtab + sym->st_name);
+ pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",
+ module->name, relindex, i, symname,
+ ELF32_R_TYPE(rel->r_info), loc,
+ sym->st_value);
return -ENOEXEC;
}
return NULL;
}
+extern void fixup_pv_table(const void *, unsigned long);
extern void fixup_smp(const void *, unsigned long);
int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
struct module *mod)
{
- const Elf_Shdr * __maybe_unused s = NULL;
+ const Elf_Shdr *s = NULL;
#ifdef CONFIG_ARM_UNWIND
const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
const Elf_Shdr *sechdrs_end = sechdrs + hdr->e_shnum;
maps[i].unw_sec->sh_size,
maps[i].txt_sec->sh_addr,
maps[i].txt_sec->sh_size);
+#endif
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+ s = find_mod_section(hdr, sechdrs, ".pv_table");
+ if (s)
+ fixup_pv_table((void *)s->sh_addr, s->sh_size);
#endif
s = find_mod_section(hdr, sechdrs, ".alt.smp.init");
if (s && !is_smp())
* enable the interrupt.
*/
-#ifdef CONFIG_CPU_V6
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
enum armv6_perf_types {
ARMV6_PERFCTR_ICACHE_MISS = 0x0,
ARMV6_PERFCTR_IBUF_STALL = 0x1,
{
return NULL;
}
-#endif /* CONFIG_CPU_V6 */
+#endif /* CONFIG_CPU_V6 || CONFIG_CPU_V6K */
#include <asm/system.h>
#include <asm/traps.h>
-#include "ptrace.h"
-
#define REG_PC 15
#define REG_PSR 16
/*
return ret;
}
-static inline int
-read_u32(struct task_struct *task, unsigned long addr, u32 *res)
-{
- int ret;
-
- ret = access_process_vm(task, addr, res, sizeof(*res), 0);
-
- return ret == sizeof(*res) ? 0 : -EIO;
-}
-
-static inline int
-read_instr(struct task_struct *task, unsigned long addr, u32 *res)
-{
- int ret;
-
- if (addr & 1) {
- u16 val;
- ret = access_process_vm(task, addr & ~1, &val, sizeof(val), 0);
- ret = ret == sizeof(val) ? 0 : -EIO;
- *res = val;
- } else {
- u32 val;
- ret = access_process_vm(task, addr & ~3, &val, sizeof(val), 0);
- ret = ret == sizeof(val) ? 0 : -EIO;
- *res = val;
- }
- return ret;
-}
-
-/*
- * Get value of register `rn' (in the instruction)
- */
-static unsigned long
-ptrace_getrn(struct task_struct *child, unsigned long insn)
-{
- unsigned int reg = (insn >> 16) & 15;
- unsigned long val;
-
- val = get_user_reg(child, reg);
- if (reg == 15)
- val += 8;
-
- return val;
-}
-
-/*
- * Get value of operand 2 (in an ALU instruction)
- */
-static unsigned long
-ptrace_getaluop2(struct task_struct *child, unsigned long insn)
-{
- unsigned long val;
- int shift;
- int type;
-
- if (insn & 1 << 25) {
- val = insn & 255;
- shift = (insn >> 8) & 15;
- type = 3;
- } else {
- val = get_user_reg (child, insn & 15);
-
- if (insn & (1 << 4))
- shift = (int)get_user_reg (child, (insn >> 8) & 15);
- else
- shift = (insn >> 7) & 31;
-
- type = (insn >> 5) & 3;
- }
-
- switch (type) {
- case 0: val <<= shift; break;
- case 1: val >>= shift; break;
- case 2:
- val = (((signed long)val) >> shift);
- break;
- case 3:
- val = (val >> shift) | (val << (32 - shift));
- break;
- }
- return val;
-}
-
-/*
- * Get value of operand 2 (in a LDR instruction)
- */
-static unsigned long
-ptrace_getldrop2(struct task_struct *child, unsigned long insn)
-{
- unsigned long val;
- int shift;
- int type;
-
- val = get_user_reg(child, insn & 15);
- shift = (insn >> 7) & 31;
- type = (insn >> 5) & 3;
-
- switch (type) {
- case 0: val <<= shift; break;
- case 1: val >>= shift; break;
- case 2:
- val = (((signed long)val) >> shift);
- break;
- case 3:
- val = (val >> shift) | (val << (32 - shift));
- break;
- }
- return val;
-}
-
-#define OP_MASK 0x01e00000
-#define OP_AND 0x00000000
-#define OP_EOR 0x00200000
-#define OP_SUB 0x00400000
-#define OP_RSB 0x00600000
-#define OP_ADD 0x00800000
-#define OP_ADC 0x00a00000
-#define OP_SBC 0x00c00000
-#define OP_RSC 0x00e00000
-#define OP_ORR 0x01800000
-#define OP_MOV 0x01a00000
-#define OP_BIC 0x01c00000
-#define OP_MVN 0x01e00000
-
-static unsigned long
-get_branch_address(struct task_struct *child, unsigned long pc, unsigned long insn)
-{
- u32 alt = 0;
-
- switch (insn & 0x0e000000) {
- case 0x00000000:
- case 0x02000000: {
- /*
- * data processing
- */
- long aluop1, aluop2, ccbit;
-
- if ((insn & 0x0fffffd0) == 0x012fff10) {
- /*
- * bx or blx
- */
- alt = get_user_reg(child, insn & 15);
- break;
- }
-
-
- if ((insn & 0xf000) != 0xf000)
- break;
-
- aluop1 = ptrace_getrn(child, insn);
- aluop2 = ptrace_getaluop2(child, insn);
- ccbit = get_user_reg(child, REG_PSR) & PSR_C_BIT ? 1 : 0;
-
- switch (insn & OP_MASK) {
- case OP_AND: alt = aluop1 & aluop2; break;
- case OP_EOR: alt = aluop1 ^ aluop2; break;
- case OP_SUB: alt = aluop1 - aluop2; break;
- case OP_RSB: alt = aluop2 - aluop1; break;
- case OP_ADD: alt = aluop1 + aluop2; break;
- case OP_ADC: alt = aluop1 + aluop2 + ccbit; break;
- case OP_SBC: alt = aluop1 - aluop2 + ccbit; break;
- case OP_RSC: alt = aluop2 - aluop1 + ccbit; break;
- case OP_ORR: alt = aluop1 | aluop2; break;
- case OP_MOV: alt = aluop2; break;
- case OP_BIC: alt = aluop1 & ~aluop2; break;
- case OP_MVN: alt = ~aluop2; break;
- }
- break;
- }
-
- case 0x04000000:
- case 0x06000000:
- /*
- * ldr
- */
- if ((insn & 0x0010f000) == 0x0010f000) {
- unsigned long base;
-
- base = ptrace_getrn(child, insn);
- if (insn & 1 << 24) {
- long aluop2;
-
- if (insn & 0x02000000)
- aluop2 = ptrace_getldrop2(child, insn);
- else
- aluop2 = insn & 0xfff;
-
- if (insn & 1 << 23)
- base += aluop2;
- else
- base -= aluop2;
- }
- read_u32(child, base, &alt);
- }
- break;
-
- case 0x08000000:
- /*
- * ldm
- */
- if ((insn & 0x00108000) == 0x00108000) {
- unsigned long base;
- unsigned int nr_regs;
-
- if (insn & (1 << 23)) {
- nr_regs = hweight16(insn & 65535) << 2;
-
- if (!(insn & (1 << 24)))
- nr_regs -= 4;
- } else {
- if (insn & (1 << 24))
- nr_regs = -4;
- else
- nr_regs = 0;
- }
-
- base = ptrace_getrn(child, insn);
-
- read_u32(child, base + nr_regs, &alt);
- break;
- }
- break;
-
- case 0x0a000000: {
- /*
- * bl or b
- */
- signed long displ;
- /* It's a branch/branch link: instead of trying to
- * figure out whether the branch will be taken or not,
- * we'll put a breakpoint at both locations. This is
- * simpler, more reliable, and probably not a whole lot
- * slower than the alternative approach of emulating the
- * branch.
- */
- displ = (insn & 0x00ffffff) << 8;
- displ = (displ >> 6) + 8;
- if (displ != 0 && displ != 4)
- alt = pc + displ;
- }
- break;
- }
-
- return alt;
-}
-
-static int
-swap_insn(struct task_struct *task, unsigned long addr,
- void *old_insn, void *new_insn, int size)
-{
- int ret;
-
- ret = access_process_vm(task, addr, old_insn, size, 0);
- if (ret == size)
- ret = access_process_vm(task, addr, new_insn, size, 1);
- return ret;
-}
-
-static void
-add_breakpoint(struct task_struct *task, struct debug_info *dbg, unsigned long addr)
-{
- int nr = dbg->nsaved;
-
- if (nr < 2) {
- u32 new_insn = BREAKINST_ARM;
- int res;
-
- res = swap_insn(task, addr, &dbg->bp[nr].insn, &new_insn, 4);
-
- if (res == 4) {
- dbg->bp[nr].address = addr;
- dbg->nsaved += 1;
- }
- } else
- printk(KERN_ERR "ptrace: too many breakpoints\n");
-}
-
-/*
- * Clear one breakpoint in the user program. We copy what the hardware
- * does and use bit 0 of the address to indicate whether this is a Thumb
- * breakpoint or an ARM breakpoint.
- */
-static void clear_breakpoint(struct task_struct *task, struct debug_entry *bp)
-{
- unsigned long addr = bp->address;
- union debug_insn old_insn;
- int ret;
-
- if (addr & 1) {
- ret = swap_insn(task, addr & ~1, &old_insn.thumb,
- &bp->insn.thumb, 2);
-
- if (ret != 2 || old_insn.thumb != BREAKINST_THUMB)
- printk(KERN_ERR "%s:%d: corrupted Thumb breakpoint at "
- "0x%08lx (0x%04x)\n", task->comm,
- task_pid_nr(task), addr, old_insn.thumb);
- } else {
- ret = swap_insn(task, addr & ~3, &old_insn.arm,
- &bp->insn.arm, 4);
-
- if (ret != 4 || old_insn.arm != BREAKINST_ARM)
- printk(KERN_ERR "%s:%d: corrupted ARM breakpoint at "
- "0x%08lx (0x%08x)\n", task->comm,
- task_pid_nr(task), addr, old_insn.arm);
- }
-}
-
-void ptrace_set_bpt(struct task_struct *child)
-{
- struct pt_regs *regs;
- unsigned long pc;
- u32 insn;
- int res;
-
- regs = task_pt_regs(child);
- pc = instruction_pointer(regs);
-
- if (thumb_mode(regs)) {
- printk(KERN_WARNING "ptrace: can't handle thumb mode\n");
- return;
- }
-
- res = read_instr(child, pc, &insn);
- if (!res) {
- struct debug_info *dbg = &child->thread.debug;
- unsigned long alt;
-
- dbg->nsaved = 0;
-
- alt = get_branch_address(child, pc, insn);
- if (alt)
- add_breakpoint(child, dbg, alt);
-
- /*
- * Note that we ignore the result of setting the above
- * breakpoint since it may fail. When it does, this is
- * not so much an error, but a forewarning that we may
- * be receiving a prefetch abort shortly.
- *
- * If we don't set this breakpoint here, then we can
- * lose control of the thread during single stepping.
- */
- if (!alt || predicate(insn) != PREDICATE_ALWAYS)
- add_breakpoint(child, dbg, pc + 4);
- }
-}
-
-/*
- * Ensure no single-step breakpoint is pending. Returns non-zero
- * value if child was being single-stepped.
- */
-void ptrace_cancel_bpt(struct task_struct *child)
-{
- int i, nsaved = child->thread.debug.nsaved;
-
- child->thread.debug.nsaved = 0;
-
- if (nsaved > 2) {
- printk("ptrace_cancel_bpt: bogus nsaved: %d!\n", nsaved);
- nsaved = 2;
- }
-
- for (i = 0; i < nsaved; i++)
- clear_breakpoint(child, &child->thread.debug.bp[i]);
-}
-
-void user_disable_single_step(struct task_struct *task)
-{
- task->ptrace &= ~PT_SINGLESTEP;
- ptrace_cancel_bpt(task);
-}
-
-void user_enable_single_step(struct task_struct *task)
-{
- task->ptrace |= PT_SINGLESTEP;
-}
-
/*
* Called by kernel/ptrace.c when detaching..
*/
void ptrace_disable(struct task_struct *child)
{
- user_disable_single_step(child);
+ /* Nothing to do. */
}
/*
{
siginfo_t info;
- ptrace_cancel_bpt(tsk);
-
info.si_signo = SIGTRAP;
info.si_errno = 0;
info.si_code = TRAP_BRKPT;
+++ /dev/null
-/*
- * linux/arch/arm/kernel/ptrace.h
- *
- * Copyright (C) 2000-2003 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/ptrace.h>
-
-extern void ptrace_cancel_bpt(struct task_struct *);
-extern void ptrace_set_bpt(struct task_struct *);
-extern void ptrace_break(struct task_struct *, struct pt_regs *);
-
-/*
- * Send SIGTRAP if we're single-stepping
- */
-static inline void single_step_trap(struct task_struct *task)
-{
- if (task->ptrace & PT_SINGLESTEP) {
- ptrace_cancel_bpt(task);
- send_sig(SIGTRAP, task, 1);
- }
-}
-
-static inline void single_step_clear(struct task_struct *task)
-{
- if (task->ptrace & PT_SINGLESTEP)
- ptrace_cancel_bpt(task);
-}
-
-static inline void single_step_set(struct task_struct *task)
-{
- if (task->ptrace & PT_SINGLESTEP)
- ptrace_set_bpt(task);
-}
* the Free Software Foundation.
*/
#include <linux/module.h>
+#include <linux/ftrace.h>
#if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND)
#include <linux/sched.h>
* already provide the required functionality.
*/
extern struct proc_info_list *lookup_processor_type(unsigned int);
-extern struct machine_desc *lookup_machine_type(unsigned int);
+
+static void __init early_print(const char *str, ...)
+{
+ extern void printascii(const char *);
+ char buf[256];
+ va_list ap;
+
+ va_start(ap, str);
+ vsnprintf(buf, sizeof(buf), str, ap);
+ va_end(ap);
+
+#ifdef CONFIG_DEBUG_LL
+ printascii(buf);
+#endif
+ printk("%s", buf);
+}
static void __init feat_v6_fixup(void)
{
static struct machine_desc * __init setup_machine(unsigned int nr)
{
- struct machine_desc *list;
+ extern struct machine_desc __arch_info_begin[], __arch_info_end[];
+ struct machine_desc *p;
/*
* locate machine in the list of supported machines.
*/
- list = lookup_machine_type(nr);
- if (!list) {
- printk("Machine configuration botched (nr %d), unable "
- "to continue.\n", nr);
- while (1);
- }
+ for (p = __arch_info_begin; p < __arch_info_end; p++)
+ if (nr == p->nr) {
+ printk("Machine: %s\n", p->name);
+ return p;
+ }
- printk("Machine: %s\n", list->name);
+ early_print("\n"
+ "Error: unrecognized/unsupported machine ID (r1 = 0x%08x).\n\n"
+ "Available machine support:\n\nID (hex)\tNAME\n", nr);
- return list;
+ for (p = __arch_info_begin; p < __arch_info_end; p++)
+ early_print("%08x\t%s\n", p->nr, p->name);
+
+ early_print("\nPlease check your kernel config and/or bootloader.\n");
+
+ while (true)
+ /* can't use cpu_relax() here as it may require MMU setup */;
}
static int __init arm_add_memory(unsigned long start, unsigned long size)
{ tag_size(tag_core), ATAG_CORE },
{ 1, PAGE_SIZE, 0xff },
{ tag_size(tag_mem32), ATAG_MEM },
- { MEM_SIZE, PHYS_OFFSET },
+ { MEM_SIZE },
{ 0, ATAG_NONE }
};
struct machine_desc *mdesc;
char *from = default_command_line;
+ init_tags.mem.start = PHYS_OFFSET;
+
unwind_init();
setup_processor();
if (__atags_pointer)
tags = phys_to_virt(__atags_pointer);
- else if (mdesc->boot_params)
- tags = phys_to_virt(mdesc->boot_params);
+ else if (mdesc->boot_params) {
+#ifdef CONFIG_MMU
+ /*
+ * We still are executing with a minimal MMU mapping created
+ * with the presumption that the machine default for this
+ * is located in the first MB of RAM. Anything else will
+ * fault and silently hang the kernel at this point.
+ */
+ if (mdesc->boot_params < PHYS_OFFSET ||
+ mdesc->boot_params >= PHYS_OFFSET + SZ_1M) {
+ printk(KERN_WARNING
+ "Default boot params at physical 0x%08lx out of reach\n",
+ mdesc->boot_params);
+ } else
+#endif
+ {
+ tags = phys_to_virt(mdesc->boot_params);
+ }
+ }
#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
/*
#include <asm/unistd.h>
#include <asm/vfp.h>
-#include "ptrace.h"
#include "signal.h"
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
if (restore_sigframe(regs, frame))
goto badframe;
- single_step_trap(current);
-
return regs->ARM_r0;
badframe:
if (do_sigaltstack(&frame->sig.uc.uc_stack, NULL, regs->ARM_sp) == -EFAULT)
goto badframe;
- single_step_trap(current);
-
return regs->ARM_r0;
badframe:
if (try_to_freeze())
goto no_signal;
- single_step_clear(current);
-
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
sigset_t *oldset;
if (test_thread_flag(TIF_RESTORE_SIGMASK))
clear_thread_flag(TIF_RESTORE_SIGMASK);
}
- single_step_set(current);
return;
}
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
}
- single_step_set(current);
}
asmlinkage void
--- /dev/null
+#include <linux/linkage.h>
+#include <linux/threads.h>
+#include <asm/asm-offsets.h>
+#include <asm/assembler.h>
+#include <asm/glue-cache.h>
+#include <asm/glue-proc.h>
+#include <asm/system.h>
+ .text
+
+/*
+ * Save CPU state for a suspend
+ * r1 = v:p offset
+ * r3 = virtual return function
+ * Note: sp is decremented to allocate space for CPU state on stack
+ * r0-r3,r9,r10,lr corrupted
+ */
+ENTRY(cpu_suspend)
+ mov r9, lr
+#ifdef MULTI_CPU
+ ldr r10, =processor
+ mov r2, sp @ current virtual SP
+ ldr r0, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
+ ldr ip, [r10, #CPU_DO_RESUME] @ virtual resume function
+ sub sp, sp, r0 @ allocate CPU state on stack
+ mov r0, sp @ save pointer
+ add ip, ip, r1 @ convert resume fn to phys
+ stmfd sp!, {r1, r2, r3, ip} @ save v:p, virt SP, retfn, phys resume fn
+ ldr r3, =sleep_save_sp
+ add r2, sp, r1 @ convert SP to phys
+#ifdef CONFIG_SMP
+ ALT_SMP(mrc p15, 0, lr, c0, c0, 5)
+ ALT_UP(mov lr, #0)
+ and lr, lr, #15
+ str r2, [r3, lr, lsl #2] @ save phys SP
+#else
+ str r2, [r3] @ save phys SP
+#endif
+ mov lr, pc
+ ldr pc, [r10, #CPU_DO_SUSPEND] @ save CPU state
+#else
+ mov r2, sp @ current virtual SP
+ ldr r0, =cpu_suspend_size
+ sub sp, sp, r0 @ allocate CPU state on stack
+ mov r0, sp @ save pointer
+ stmfd sp!, {r1, r2, r3} @ save v:p, virt SP, return fn
+ ldr r3, =sleep_save_sp
+ add r2, sp, r1 @ convert SP to phys
+#ifdef CONFIG_SMP
+ ALT_SMP(mrc p15, 0, lr, c0, c0, 5)
+ ALT_UP(mov lr, #0)
+ and lr, lr, #15
+ str r2, [r3, lr, lsl #2] @ save phys SP
+#else
+ str r2, [r3] @ save phys SP
+#endif
+ bl cpu_do_suspend
+#endif
+
+ @ flush data cache
+#ifdef MULTI_CACHE
+ ldr r10, =cpu_cache
+ mov lr, r9
+ ldr pc, [r10, #CACHE_FLUSH_KERN_ALL]
+#else
+ mov lr, r9
+ b __cpuc_flush_kern_all
+#endif
+ENDPROC(cpu_suspend)
+ .ltorg
+
+/*
+ * r0 = control register value
+ * r1 = v:p offset (preserved by cpu_do_resume)
+ * r2 = phys page table base
+ * r3 = L1 section flags
+ */
+ENTRY(cpu_resume_mmu)
+ adr r4, cpu_resume_turn_mmu_on
+ mov r4, r4, lsr #20
+ orr r3, r3, r4, lsl #20
+ ldr r5, [r2, r4, lsl #2] @ save old mapping
+ str r3, [r2, r4, lsl #2] @ setup 1:1 mapping for mmu code
+ sub r2, r2, r1
+ ldr r3, =cpu_resume_after_mmu
+ bic r1, r0, #CR_C @ ensure D-cache is disabled
+ b cpu_resume_turn_mmu_on
+ENDPROC(cpu_resume_mmu)
+ .ltorg
+ .align 5
+cpu_resume_turn_mmu_on:
+ mcr p15, 0, r1, c1, c0, 0 @ turn on MMU, I-cache, etc
+ mrc p15, 0, r1, c0, c0, 0 @ read id reg
+ mov r1, r1
+ mov r1, r1
+ mov pc, r3 @ jump to virtual address
+ENDPROC(cpu_resume_turn_mmu_on)
+cpu_resume_after_mmu:
+ str r5, [r2, r4, lsl #2] @ restore old mapping
+ mcr p15, 0, r0, c1, c0, 0 @ turn on D-cache
+ mov pc, lr
+ENDPROC(cpu_resume_after_mmu)
+
+/*
+ * Note: Yes, part of the following code is located into the .data section.
+ * This is to allow sleep_save_sp to be accessed with a relative load
+ * while we can't rely on any MMU translation. We could have put
+ * sleep_save_sp in the .text section as well, but some setups might
+ * insist on it to be truly read-only.
+ */
+ .data
+ .align
+ENTRY(cpu_resume)
+#ifdef CONFIG_SMP
+ adr r0, sleep_save_sp
+ ALT_SMP(mrc p15, 0, r1, c0, c0, 5)
+ ALT_UP(mov r1, #0)
+ and r1, r1, #15
+ ldr r0, [r0, r1, lsl #2] @ stack phys addr
+#else
+ ldr r0, sleep_save_sp @ stack phys addr
+#endif
+ msr cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off
+#ifdef MULTI_CPU
+ ldmia r0!, {r1, sp, lr, pc} @ load v:p, stack, return fn, resume fn
+#else
+ ldmia r0!, {r1, sp, lr} @ load v:p, stack, return fn
+ b cpu_do_resume
+#endif
+ENDPROC(cpu_resume)
+
+sleep_save_sp:
+ .rept CONFIG_NR_CPUS
+ .long 0 @ preserve stack phys ptr here
+ .endr
*/
flush_cache_all();
}
+
+/*
+ * Set the executing CPUs power mode as defined. This will be in
+ * preparation for it executing a WFI instruction.
+ *
+ * This function must be called with preemption disabled, and as it
+ * has the side effect of disabling coherency, caches must have been
+ * flushed. Interrupts must also have been disabled.
+ */
+int scu_power_mode(void __iomem *scu_base, unsigned int mode)
+{
+ unsigned int val;
+ int cpu = smp_processor_id();
+
+ if (mode > 3 || mode == 1 || cpu > 3)
+ return -EINVAL;
+
+ val = __raw_readb(scu_base + SCU_CPU_STATUS + cpu) & ~0x03;
+ val |= mode;
+ __raw_writeb(val, scu_base + SCU_CPU_STATUS + cpu);
+
+ return 0;
+}
#include <linux/string.h> /* memcpy */
#include <asm/cputype.h>
#include <asm/mach/map.h>
-#include <mach/memory.h>
+#include <asm/memory.h>
#include "tcm.h"
static struct gen_pool *tcm_pool;
#include <linux/kexec.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/sched.h>
#include <asm/atomic.h>
#include <asm/cacheflush.h>
#include <asm/unwind.h>
#include <asm/tls.h>
-#include "ptrace.h"
#include "signal.h"
static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" };
return ret;
}
-DEFINE_SPINLOCK(die_lock);
+static DEFINE_SPINLOCK(die_lock);
/*
* This function is protected against re-entrancy.
__smpalt_end = .;
#endif
+ __pv_table_begin = .;
+ *(.pv_table)
+ __pv_table_end = .;
+
INIT_SETUP(16)
INIT_CALLS
-
-#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_32v6K)
+#if __LINUX_ARM_ARCH__ >= 6
.macro bitop, instr
+ ands ip, r1, #3
+ strneb r1, [ip] @ assert word-aligned
mov r2, #1
- and r3, r0, #7 @ Get bit offset
- add r1, r1, r0, lsr #3 @ Get byte offset
+ and r3, r0, #31 @ Get bit offset
+ mov r0, r0, lsr #5
+ add r1, r1, r0, lsl #2 @ Get word offset
mov r3, r2, lsl r3
-1: ldrexb r2, [r1]
+1: ldrex r2, [r1]
\instr r2, r2, r3
- strexb r0, r2, [r1]
+ strex r0, r2, [r1]
cmp r0, #0
bne 1b
- mov pc, lr
+ bx lr
.endm
.macro testop, instr, store
- and r3, r0, #7 @ Get bit offset
+ ands ip, r1, #3
+ strneb r1, [ip] @ assert word-aligned
mov r2, #1
- add r1, r1, r0, lsr #3 @ Get byte offset
+ and r3, r0, #31 @ Get bit offset
+ mov r0, r0, lsr #5
+ add r1, r1, r0, lsl #2 @ Get word offset
mov r3, r2, lsl r3 @ create mask
smp_dmb
-1: ldrexb r2, [r1]
+1: ldrex r2, [r1]
ands r0, r2, r3 @ save old value of bit
- \instr r2, r2, r3 @ toggle bit
- strexb ip, r2, [r1]
+ \instr r2, r2, r3 @ toggle bit
+ strex ip, r2, [r1]
cmp ip, #0
bne 1b
smp_dmb
cmp r0, #0
movne r0, #1
-2: mov pc, lr
+2: bx lr
.endm
#else
.macro bitop, instr
- and r2, r0, #7
+ ands ip, r1, #3
+ strneb r1, [ip] @ assert word-aligned
+ and r2, r0, #31
+ mov r0, r0, lsr #5
mov r3, #1
mov r3, r3, lsl r2
save_and_disable_irqs ip
- ldrb r2, [r1, r0, lsr #3]
+ ldr r2, [r1, r0, lsl #2]
\instr r2, r2, r3
- strb r2, [r1, r0, lsr #3]
+ str r2, [r1, r0, lsl #2]
restore_irqs ip
mov pc, lr
.endm
* to avoid dirtying the data cache.
*/
.macro testop, instr, store
- add r1, r1, r0, lsr #3
- and r3, r0, #7
- mov r0, #1
+ ands ip, r1, #3
+ strneb r1, [ip] @ assert word-aligned
+ and r3, r0, #31
+ mov r0, r0, lsr #5
save_and_disable_irqs ip
- ldrb r2, [r1]
+ ldr r2, [r1, r0, lsl #2]!
+ mov r0, #1
tst r2, r0, lsl r3
\instr r2, r2, r0, lsl r3
\store r2, [r1]
#include "bitops.h"
.text
-/* Purpose : Function to change a bit
- * Prototype: int change_bit(int bit, void *addr)
- */
-ENTRY(_change_bit_be)
- eor r0, r0, #0x18 @ big endian byte ordering
-ENTRY(_change_bit_le)
+ENTRY(_change_bit)
bitop eor
-ENDPROC(_change_bit_be)
-ENDPROC(_change_bit_le)
+ENDPROC(_change_bit)
#include "bitops.h"
.text
-/*
- * Purpose : Function to clear a bit
- * Prototype: int clear_bit(int bit, void *addr)
- */
-ENTRY(_clear_bit_be)
- eor r0, r0, #0x18 @ big endian byte ordering
-ENTRY(_clear_bit_le)
+ENTRY(_clear_bit)
bitop bic
-ENDPROC(_clear_bit_be)
-ENDPROC(_clear_bit_le)
+ENDPROC(_clear_bit)
#include "bitops.h"
.text
-/*
- * Purpose : Function to set a bit
- * Prototype: int set_bit(int bit, void *addr)
- */
-ENTRY(_set_bit_be)
- eor r0, r0, #0x18 @ big endian byte ordering
-ENTRY(_set_bit_le)
+ENTRY(_set_bit)
bitop orr
-ENDPROC(_set_bit_be)
-ENDPROC(_set_bit_le)
+ENDPROC(_set_bit)
#include "bitops.h"
.text
-ENTRY(_test_and_change_bit_be)
- eor r0, r0, #0x18 @ big endian byte ordering
-ENTRY(_test_and_change_bit_le)
- testop eor, strb
-ENDPROC(_test_and_change_bit_be)
-ENDPROC(_test_and_change_bit_le)
+ENTRY(_test_and_change_bit)
+ testop eor, str
+ENDPROC(_test_and_change_bit)
#include "bitops.h"
.text
-ENTRY(_test_and_clear_bit_be)
- eor r0, r0, #0x18 @ big endian byte ordering
-ENTRY(_test_and_clear_bit_le)
- testop bicne, strneb
-ENDPROC(_test_and_clear_bit_be)
-ENDPROC(_test_and_clear_bit_le)
+ENTRY(_test_and_clear_bit)
+ testop bicne, strne
+ENDPROC(_test_and_clear_bit)
#include "bitops.h"
.text
-ENTRY(_test_and_set_bit_be)
- eor r0, r0, #0x18 @ big endian byte ordering
-ENTRY(_test_and_set_bit_le)
- testop orreq, streqb
-ENDPROC(_test_and_set_bit_be)
-ENDPROC(_test_and_set_bit_le)
+ENTRY(_test_and_set_bit)
+ testop orreq, streq
+ENDPROC(_test_and_set_bit)
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0xf0000000)
+#define PLAT_PHYS_OFFSET UL(0xf0000000)
#endif /* __ASM_ARCH_MEMORY_H */
{
/* RTC */
I2C_BOARD_INFO("isl1208", 0x6f),
+ .irq = gpio_to_irq(AT91_PIN_PA31),
},
};
#define gpio_set_value __gpio_set_value
#define gpio_cansleep __gpio_cansleep
-static inline int gpio_to_irq(unsigned gpio)
-{
- return gpio;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return irq;
-}
+#define gpio_to_irq(gpio) (gpio)
+#define irq_to_gpio(irq) (irq)
#endif /* __ASSEMBLY__ */
#include <mach/hardware.h>
-#define PHYS_OFFSET (AT91_SDRAM_BASE)
+#define PLAT_PHYS_OFFSET (AT91_SDRAM_BASE)
#endif
* *_SIZE is the size of the region
* *_BASE is the virtual address
*/
-#define RAM_START PHYS_OFFSET
+#define RAM_START PLAT_PHYS_OFFSET
#define RAM_SIZE (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
#define RAM_BASE PAGE_OFFSET
* files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
*/
-#define PHYS_OFFSET CFG_GLOBAL_RAM_BASE
+#define PLAT_PHYS_OFFSET CFG_GLOBAL_RAM_BASE
/*
* Maximum DMA memory allowed is 14M
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0xc0000000)
+#define PLAT_PHYS_OFFSET UL(0xc0000000)
#if !defined(CONFIG_ARCH_CDB89712) && !defined (CONFIG_ARCH_AUTCPU12)
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#define __phys_to_bus(x) ((x) + PHYS_OFFSET)
#define __bus_to_phys(x) ((x) - PHYS_OFFSET)
#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
#error Cannot enable DaVinci and DA8XX platforms concurrently
#elif defined(CONFIG_ARCH_DAVINCI_DA8XX)
-#define PHYS_OFFSET DA8XX_DDR_BASE
+#define PLAT_PHYS_OFFSET DA8XX_DDR_BASE
#else
-#define PHYS_OFFSET DAVINCI_DDR_BASE
+#define PLAT_PHYS_OFFSET DAVINCI_DDR_BASE
#endif
#define DDR2_SDRCR_OFFSET 0xc
Say 'Y' here if you want your kernel to support the
Marvell DB-MV88AP510 Development Board.
- config MACH_CM_A510
+config MACH_CM_A510
bool "CompuLab CM-A510 Board"
help
Say 'Y' here if you want your kernel to support the
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
/*
* Cache flushing area - SRAM
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
+#include <linux/spi/spi.h>
+
+#include <sound/cs4271.h>
#include <mach/hardware.h>
+#include <mach/fb.h>
+#include <mach/ep93xx_spi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
}
+/*************************************************************************
+ * EDB93xx SPI peripheral handling
+ *************************************************************************/
+static struct cs4271_platform_data edb93xx_cs4271_data = {
+ .gpio_nreset = -EINVAL, /* filled in later */
+};
+
+static int edb93xx_cs4271_hw_setup(struct spi_device *spi)
+{
+ return gpio_request_one(EP93XX_GPIO_LINE_EGPIO6,
+ GPIOF_OUT_INIT_HIGH, spi->modalias);
+}
+
+static void edb93xx_cs4271_hw_cleanup(struct spi_device *spi)
+{
+ gpio_free(EP93XX_GPIO_LINE_EGPIO6);
+}
+
+static void edb93xx_cs4271_hw_cs_control(struct spi_device *spi, int value)
+{
+ gpio_set_value(EP93XX_GPIO_LINE_EGPIO6, value);
+}
+
+static struct ep93xx_spi_chip_ops edb93xx_cs4271_hw = {
+ .setup = edb93xx_cs4271_hw_setup,
+ .cleanup = edb93xx_cs4271_hw_cleanup,
+ .cs_control = edb93xx_cs4271_hw_cs_control,
+};
+
+static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
+ {
+ .modalias = "cs4271",
+ .platform_data = &edb93xx_cs4271_data,
+ .controller_data = &edb93xx_cs4271_hw,
+ .max_speed_hz = 6000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_3,
+ },
+};
+
+static struct ep93xx_spi_info edb93xx_spi_info __initdata = {
+ .num_chipselect = ARRAY_SIZE(edb93xx_spi_board_info),
+};
+
+static void __init edb93xx_register_spi(void)
+{
+ if (machine_is_edb9301() || machine_is_edb9302())
+ edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO1;
+ else if (machine_is_edb9302a() || machine_is_edb9307a())
+ edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_H(2);
+ else if (machine_is_edb9315a())
+ edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;
+
+ ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info,
+ ARRAY_SIZE(edb93xx_spi_board_info));
+}
+
+
+/*************************************************************************
+ * EDB93xx I2S
+ *************************************************************************/
+static int __init edb93xx_has_audio(void)
+{
+ return (machine_is_edb9301() || machine_is_edb9302() ||
+ machine_is_edb9302a() || machine_is_edb9307a() ||
+ machine_is_edb9315a());
+}
+
+static void __init edb93xx_register_i2s(void)
+{
+ if (edb93xx_has_audio()) {
+ ep93xx_register_i2s();
+ }
+}
+
+
/*************************************************************************
* EDB93xx pwm
*************************************************************************/
}
+/*************************************************************************
+ * EDB93xx framebuffer
+ *************************************************************************/
+static struct ep93xxfb_mach_info __initdata edb93xxfb_info = {
+ .num_modes = EP93XXFB_USE_MODEDB,
+ .bpp = 16,
+ .flags = 0,
+};
+
+static int __init edb93xx_has_fb(void)
+{
+ /* These platforms have an ep93xx with video capability */
+ return machine_is_edb9307() || machine_is_edb9307a() ||
+ machine_is_edb9312() || machine_is_edb9315() ||
+ machine_is_edb9315a();
+}
+
+static void __init edb93xx_register_fb(void)
+{
+ if (!edb93xx_has_fb())
+ return;
+
+ if (machine_is_edb9307a() || machine_is_edb9315a())
+ edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN0;
+ else
+ edb93xxfb_info.flags |= EP93XXFB_USE_SDCSN3;
+
+ ep93xx_register_fb(&edb93xxfb_info);
+}
+
+
static void __init edb93xx_init_machine(void)
{
ep93xx_init_devices();
edb93xx_register_flash();
ep93xx_register_eth(&edb93xx_eth_data, 1);
edb93xx_register_i2c();
+ edb93xx_register_spi();
+ edb93xx_register_i2s();
edb93xx_register_pwm();
+ edb93xx_register_fb();
}
gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
}
-void ep93xx_gpio_int_debounce(unsigned int irq, int enable)
+static void ep93xx_gpio_int_debounce(unsigned int irq, bool enable)
{
int line = irq_to_gpio(irq);
int port = line >> 3;
__raw_writeb(gpio_int_debounce[port],
EP93XX_GPIO_REG(int_debounce_register_offset[port]));
}
-EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
{
local_irq_restore(flags);
}
+static int ep93xx_gpio_set_debounce(struct gpio_chip *chip,
+ unsigned offset, unsigned debounce)
+{
+ int gpio = chip->base + offset;
+ int irq = gpio_to_irq(gpio);
+
+ if (irq < 0)
+ return -EINVAL;
+
+ ep93xx_gpio_int_debounce(irq, debounce ? true : false);
+
+ return 0;
+}
+
static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
{
struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
EP93XX_SYSCON_DEVCFG_GONIDE |
EP93XX_SYSCON_DEVCFG_HONIDE);
- for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++)
- gpiochip_add(&ep93xx_gpio_banks[i].chip);
+ for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) {
+ struct gpio_chip *chip = &ep93xx_gpio_banks[i].chip;
+
+ /*
+ * Ports A, B, and F support input debouncing when
+ * used as interrupts.
+ */
+ if (!strcmp(chip->label, "A") ||
+ !strcmp(chip->label, "B") ||
+ !strcmp(chip->label, "F"))
+ chip->set_debounce = ep93xx_gpio_set_debounce;
+
+ gpiochip_add(chip);
+ }
}
/* maximum value for irq capable line identifiers */
#define EP93XX_GPIO_LINE_MAX_IRQ EP93XX_GPIO_LINE_F(7)
-extern void ep93xx_gpio_int_debounce(unsigned int irq, int enable);
-
/* new generic GPIO API - see Documentation/gpio.txt */
#include <asm-generic/gpio.h>
#define __ASM_ARCH_MEMORY_H
#if defined(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
-#define PHYS_OFFSET UL(0xc0000000)
+#define PLAT_PHYS_OFFSET UL(0xc0000000)
#elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)
-#define PHYS_OFFSET UL(0xd0000000)
+#define PLAT_PHYS_OFFSET UL(0xd0000000)
#elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)
-#define PHYS_OFFSET UL(0xe0000000)
+#define PLAT_PHYS_OFFSET UL(0xe0000000)
#elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)
-#define PHYS_OFFSET UL(0xf0000000)
+#define PLAT_PHYS_OFFSET UL(0xf0000000)
#else
#error "Kconfig bug: No EP93xx PHYS_OFFSET set"
#endif
* Copyright (C) 1998 Russell King.
* Copyright (C) 1998 Phil Blundell
*/
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/spinlock.h>
#include <asm/irq.h>
#include "common.h"
-/*
- * Footbridge timer 1 support.
- */
-static unsigned long timer1_latch;
+static cycle_t cksrc_dc21285_read(struct clocksource *cs)
+{
+ return cs->mask - *CSR_TIMER2_VALUE;
+}
-static unsigned long timer1_gettimeoffset (void)
+static int cksrc_dc21285_enable(struct clocksource *cs)
{
- unsigned long value = timer1_latch - *CSR_TIMER1_VALUE;
+ *CSR_TIMER2_LOAD = cs->mask;
+ *CSR_TIMER2_CLR = 0;
+ *CSR_TIMER2_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_DIV16;
+ return 0;
+}
- return ((tick_nsec / 1000) * value) / timer1_latch;
+static int cksrc_dc21285_disable(struct clocksource *cs)
+{
+ *CSR_TIMER2_CNTL = 0;
}
-static irqreturn_t
-timer1_interrupt(int irq, void *dev_id)
+static struct clocksource cksrc_dc21285 = {
+ .name = "dc21285_timer2",
+ .rating = 200,
+ .read = cksrc_dc21285_read,
+ .enable = cksrc_dc21285_enable,
+ .disable = cksrc_dc21285_disable,
+ .mask = CLOCKSOURCE_MASK(24),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void ckevt_dc21285_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *c)
{
+ switch (mode) {
+ case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_PERIODIC:
+ *CSR_TIMER1_CLR = 0;
+ *CSR_TIMER1_LOAD = (mem_fclk_21285 + 8 * HZ) / (16 * HZ);
+ *CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD |
+ TIMER_CNTL_DIV16;
+ break;
+
+ default:
+ *CSR_TIMER1_CNTL = 0;
+ break;
+ }
+}
+
+static struct clock_event_device ckevt_dc21285 = {
+ .name = "dc21285_timer1",
+ .features = CLOCK_EVT_FEAT_PERIODIC,
+ .rating = 200,
+ .irq = IRQ_TIMER1,
+ .set_mode = ckevt_dc21285_set_mode,
+};
+
+static irqreturn_t timer1_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *ce = dev_id;
+
*CSR_TIMER1_CLR = 0;
- timer_tick();
+ ce->event_handler(ce);
return IRQ_HANDLED;
}
static struct irqaction footbridge_timer_irq = {
- .name = "Timer1 timer tick",
+ .name = "dc21285_timer1",
.handler = timer1_interrupt,
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .dev_id = &ckevt_dc21285,
};
/*
*/
static void __init footbridge_timer_init(void)
{
- timer1_latch = (mem_fclk_21285 + 8 * HZ) / (16 * HZ);
+ struct clock_event_device *ce = &ckevt_dc21285;
+
+ clocksource_register_hz(&cksrc_dc21285, (mem_fclk_21285 + 8) / 16);
+
+ setup_irq(ce->irq, &footbridge_timer_irq);
- *CSR_TIMER1_CLR = 0;
- *CSR_TIMER1_LOAD = timer1_latch;
- *CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD | TIMER_CNTL_DIV16;
+ clockevents_calc_mult_shift(ce, mem_fclk_21285, 5);
+ ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce);
+ ce->min_delta_ns = clockevent_delta2ns(0x000004, ce);
- setup_irq(IRQ_TIMER1, &footbridge_timer_irq);
+ clockevents_register_device(ce);
}
struct sys_timer footbridge_timer = {
.init = footbridge_timer_init,
- .offset = timer1_gettimeoffset,
};
* 0xf9000000 0x50000000 1MB Cache flush
* 0xf0000000 0x80000000 16MB ISA memory
*/
+
+#ifdef CONFIG_MMU
+#define MMU_IO(a, b) (a)
+#else
+#define MMU_IO(a, b) (b)
+#endif
+
#define XBUS_SIZE 0x00100000
-#define XBUS_BASE 0xff800000
+#define XBUS_BASE MMU_IO(0xff800000, 0x40000000)
#define ARMCSR_SIZE 0x00100000
-#define ARMCSR_BASE 0xfe000000
+#define ARMCSR_BASE MMU_IO(0xfe000000, 0x42000000)
#define WFLUSH_SIZE 0x00100000
-#define WFLUSH_BASE 0xfd000000
+#define WFLUSH_BASE MMU_IO(0xfd000000, 0x78000000)
#define PCIIACK_SIZE 0x00100000
-#define PCIIACK_BASE 0xfc000000
+#define PCIIACK_BASE MMU_IO(0xfc000000, 0x79000000)
#define PCICFG1_SIZE 0x01000000
-#define PCICFG1_BASE 0xfb000000
+#define PCICFG1_BASE MMU_IO(0xfb000000, 0x7a000000)
#define PCICFG0_SIZE 0x01000000
-#define PCICFG0_BASE 0xfa000000
+#define PCICFG0_BASE MMU_IO(0xfa000000, 0x7b000000)
#define PCIMEM_SIZE 0x01000000
-#define PCIMEM_BASE 0xf0000000
+#define PCIMEM_BASE MMU_IO(0xf0000000, 0x80000000)
#define XBUS_LEDS ((volatile unsigned char *)(XBUS_BASE + 0x12000))
#define XBUS_LED_AMBER (1 << 0)
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
-#define PCIO_SIZE 0x00100000
-#define PCIO_BASE 0xff000000
+#ifdef CONFIG_MMU
+#define MMU_IO(a, b) (a)
+#else
+#define MMU_IO(a, b) (b)
+#endif
+
+#define PCIO_SIZE 0x00100000
+#define PCIO_BASE MMU_IO(0xff000000, 0x7c000000)
#define IO_SPACE_LIMIT 0xffff
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#define FLUSH_BASE_PHYS 0x50000000
* Copyright (C) 1998 Russell King.
* Copyright (C) 1998 Phil Blundell
*/
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/timex.h>
#include <asm/irq.h>
#include "common.h"
-/*
- * ISA timer tick support
- */
-#define mSEC_10_from_14 ((14318180 + 100) / 200)
+#define PIT_MODE 0x43
+#define PIT_CH0 0x40
+
+#define PIT_LATCH ((PIT_TICK_RATE + HZ / 2) / HZ)
-static unsigned long isa_gettimeoffset(void)
+static cycle_t pit_read(struct clocksource *cs)
{
+ unsigned long flags;
+ static int old_count;
+ static u32 old_jifs;
int count;
+ u32 jifs;
- static int count_p = (mSEC_10_from_14/6); /* for the first call after boot */
- static unsigned long jiffies_p = 0;
+ raw_local_irq_save(flags);
- /*
- * cache volatile jiffies temporarily; we have IRQs turned off.
- */
- unsigned long jiffies_t;
+ jifs = jiffies;
+ outb_p(0x00, PIT_MODE); /* latch the count */
+ count = inb_p(PIT_CH0); /* read the latched count */
+ count |= inb_p(PIT_CH0) << 8;
- /* timer count may underflow right here */
- outb_p(0x00, 0x43); /* latch the count ASAP */
+ if (count > old_count && jifs == old_jifs)
+ count = old_count;
- count = inb_p(0x40); /* read the latched count */
+ old_count = count;
+ old_jifs = jifs;
- /*
- * We do this guaranteed double memory access instead of a _p
- * postfix in the previous port access. Wheee, hackady hack
- */
- jiffies_t = jiffies;
+ raw_local_irq_restore(flags);
- count |= inb_p(0x40) << 8;
+ count = (PIT_LATCH - 1) - count;
- /* Detect timer underflows. If we haven't had a timer tick since
- the last time we were called, and time is apparently going
- backwards, the counter must have wrapped during this routine. */
- if ((jiffies_t == jiffies_p) && (count > count_p))
- count -= (mSEC_10_from_14/6);
- else
- jiffies_p = jiffies_t;
+ return (cycle_t)(jifs * PIT_LATCH) + count;
+}
- count_p = count;
+static struct clocksource pit_cs = {
+ .name = "pit",
+ .rating = 110,
+ .read = pit_read,
+ .mask = CLOCKSOURCE_MASK(32),
+};
- count = (((mSEC_10_from_14/6)-1) - count) * (tick_nsec / 1000);
- count = (count + (mSEC_10_from_14/6)/2) / (mSEC_10_from_14/6);
+static void pit_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ unsigned long flags;
+
+ raw_local_irq_save(flags);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ outb_p(0x34, PIT_MODE);
+ outb_p(PIT_LATCH & 0xff, PIT_CH0);
+ outb_p(PIT_LATCH >> 8, PIT_CH0);
+ break;
+
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_UNUSED:
+ outb_p(0x30, PIT_MODE);
+ outb_p(0, PIT_CH0);
+ outb_p(0, PIT_CH0);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+ local_irq_restore(flags);
+}
- return count;
+static int pit_set_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ return 0;
}
-static irqreturn_t
-isa_timer_interrupt(int irq, void *dev_id)
+static struct clock_event_device pit_ce = {
+ .name = "pit",
+ .features = CLOCK_EVT_FEAT_PERIODIC,
+ .set_mode = pit_set_mode,
+ .set_next_event = pit_set_next_event,
+ .shift = 32,
+};
+
+static irqreturn_t pit_timer_interrupt(int irq, void *dev_id)
{
- timer_tick();
+ struct clock_event_device *ce = dev_id;
+ ce->event_handler(ce);
return IRQ_HANDLED;
}
-static struct irqaction isa_timer_irq = {
- .name = "ISA timer tick",
- .handler = isa_timer_interrupt,
+static struct irqaction pit_timer_irq = {
+ .name = "pit",
+ .handler = pit_timer_interrupt,
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .dev_id = &pit_ce,
};
static void __init isa_timer_init(void)
{
- /* enable PIT timer */
- /* set for periodic (4) and LSB/MSB write (0x30) */
- outb(0x34, 0x43);
- outb((mSEC_10_from_14/6) & 0xFF, 0x40);
- outb((mSEC_10_from_14/6) >> 8, 0x40);
+ pit_ce.cpumask = cpumask_of(smp_processor_id());
+ pit_ce.mult = div_sc(PIT_TICK_RATE, NSEC_PER_SEC, pit_ce.shift);
+ pit_ce.max_delta_ns = clockevent_delta2ns(0x7fff, &pit_ce);
+ pit_ce.min_delta_ns = clockevent_delta2ns(0x000f, &pit_ce);
+
+ clocksource_register_hz(&pit_cs, PIT_TICK_RATE);
- setup_irq(IRQ_ISA_TIMER, &isa_timer_irq);
+ setup_irq(pit_ce.irq, &pit_timer_irq);
+ clockevents_register_device(&pit_ce);
}
struct sys_timer isa_timer = {
.init = isa_timer_init,
- .offset = isa_gettimeoffset,
};
platform_register_pflash(SZ_16M, NULL, 0);
platform_device_register(&ib4220b_led_device);
platform_device_register(&ib4220b_key_device);
+ platform_register_rtc();
}
MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
platform_register_pflash(SZ_8M, NULL, 0);
platform_device_register(&rut1xx_leds);
platform_device_register(&rut1xx_keys_device);
+ platform_register_rtc();
}
MACHINE_START(RUT100, "Teltonika RUT100")
wbd111_num_partitions);
platform_device_register(&wbd111_leds_device);
platform_device_register(&wbd111_keys_device);
+ platform_register_rtc();
}
MACHINE_START(WBD111, "Wiliboard WBD-111")
wbd222_num_partitions);
platform_device_register(&wbd222_leds_device);
platform_device_register(&wbd222_keys_device);
+ platform_register_rtc();
}
MACHINE_START(WBD222, "Wiliboard WBD-222")
extern void gemini_init_irq(void);
extern void gemini_timer_init(void);
extern void gemini_gpio_init(void);
+extern void platform_register_rtc(void);
/* Common platform devices registration functions */
extern int platform_register_uart(void);
return platform_device_register(&pflash_device);
}
+
+static struct resource gemini_rtc_resources[] = {
+ [0] = {
+ .start = GEMINI_RTC_BASE,
+ .end = GEMINI_RTC_BASE + 0x24,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_RTC,
+ .end = IRQ_RTC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device gemini_rtc_device = {
+ .name = "rtc-gemini",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(gemini_rtc_resources),
+ .resource = gemini_rtc_resources,
+};
+
+int __init platform_register_rtc(void)
+{
+ return platform_device_register(&gemini_rtc_device);
+}
+
#define __MACH_MEMORY_H
#ifdef CONFIG_GEMINI_MEM_SWAP
-# define PHYS_OFFSET UL(0x00000000)
+# define PLAT_PHYS_OFFSET UL(0x00000000)
#else
-# define PHYS_OFFSET UL(0x10000000)
+# define PLAT_PHYS_OFFSET UL(0x10000000)
#endif
#endif /* __MACH_MEMORY_H */
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x40000000)
+#define PLAT_PHYS_OFFSET UL(0x40000000)
/*
* This is the maximum DMA address that can be DMAd to.
* There should not be more than (0xd0000000 - 0xc0000000)
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#define BUS_OFFSET UL(0x80000000)
#define __virt_to_bus(x) ((x) - PAGE_OFFSET + BUS_OFFSET)
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#ifndef __ASSEMBLY__
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0xa0000000)
+#define PLAT_PHYS_OFFSET UL(0xa0000000)
#endif
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#include <mach/ixp2000-regs.h>
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET (0x00000000)
+#define PLAT_PHYS_OFFSET (0x00000000)
#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
/*
* Physical SRAM offset.
*/
-#define PHYS_OFFSET KS8695_SDRAM_PA
+#define PLAT_PHYS_OFFSET KS8695_SDRAM_PA
#ifndef __ASSEMBLY__
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0xc0000000)
+#define PLAT_PHYS_OFFSET UL(0xc0000000)
/*
* Sparsemem version of the above
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
/*
* Physical DRAM offset of bank 0
*/
-#define PHYS_OFFSET UL(0x80000000)
+#define PLAT_PHYS_OFFSET UL(0x80000000)
#endif
#ifndef __ASM_MACH_MEMORY_H
#define __ASM_MACH_MEMORY_H
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif /* __ASM_MACH_MEMORY_H */
MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
#ifdef CONFIG_MSM_DEBUG_UART
#endif
- .boot_params = PHYS_OFFSET + 0x100,
+ .boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
#ifdef CONFIG_MSM_DEBUG_UART
#endif
- .boot_params = PHYS_OFFSET + 0x100,
+ .boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
#ifdef CONFIG_MSM_DEBUG_UART
#endif
- .boot_params = PHYS_OFFSET + 0x100,
+ .boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
#ifdef CONFIG_MSM_DEBUG_UART
#endif
- .boot_params = PHYS_OFFSET + 0x100,
+ .boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/memory.h>
#include <asm/setup.h>
#include <mach/gpio.h>
#include <mach/board.h>
-#include <mach/memory.h>
#include <mach/msm_iomap.h>
#include <mach/dma.h>
MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
#ifdef CONFIG_MSM_DEBUG_UART
#endif
- .boot_params = PHYS_OFFSET + 0x100,
+ .boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
#ifdef CONFIG_MSM_DEBUG_UART
#endif
- .boot_params = PHYS_OFFSET + 0x100,
+ .boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
#ifdef CONFIG_MSM_DEBUG_UART
#endif
- .boot_params = PHYS_OFFSET + 0x100,
+ .boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
#ifdef CONFIG_MSM_DEBUG_UART
#endif
- .boot_params = PHYS_OFFSET + 0x100,
+ .boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = qsd8x50_map_io,
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
#ifdef CONFIG_MSM_DEBUG_UART
#endif
- .boot_params = PHYS_OFFSET + 0x100,
+ .boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = qsd8x50_map_io,
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
/* Maintainer: Brian Swetland <swetland@google.com> */
#ifdef CONFIG_MSM_DEBUG_UART
#endif
- .boot_params = PHYS_OFFSET + 0x100,
+ .boot_params = PLAT_PHYS_OFFSET + 0x100,
.fixup = sapphire_fixup,
.map_io = sapphire_map_io,
.init_irq = sapphire_init_irq,
/* physical offset of RAM */
#if defined(CONFIG_ARCH_QSD8X50) && defined(CONFIG_MSM_SOC_REV_A)
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#elif defined(CONFIG_ARCH_QSD8X50)
-#define PHYS_OFFSET UL(0x20000000)
+#define PLAT_PHYS_OFFSET UL(0x20000000)
#elif defined(CONFIG_ARCH_MSM7X30)
-#define PHYS_OFFSET UL(0x00200000)
+#define PLAT_PHYS_OFFSET UL(0x00200000)
#elif defined(CONFIG_ARCH_MSM8X60)
-#define PHYS_OFFSET UL(0x40200000)
+#define PLAT_PHYS_OFFSET UL(0x40200000)
#else
-#define PHYS_OFFSET UL(0x10000000)
+#define PLAT_PHYS_OFFSET UL(0x10000000)
#endif
#endif
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
#include <asm/irq.h>
#include <asm/mach-types.h>
+#include <asm/memory.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <mach/clock.h>
#include <mach/common.h>
#include <mach/iomux-mx3.h>
-#include <mach/memory.h>
#include "devices-imx31.h"
#include "devices.h"
}
}
-static void mxs_gpio_ack_irq(u32 irq)
+static void mxs_gpio_ack_irq(struct irq_data *d)
{
- u32 gpio = irq_to_gpio(irq);
+ u32 gpio = irq_to_gpio(d->irq);
clear_gpio_irqstatus(&mxs_gpio_ports[gpio / 32], gpio & 0x1f);
}
-static void mxs_gpio_mask_irq(u32 irq)
+static void mxs_gpio_mask_irq(struct irq_data *d)
{
- u32 gpio = irq_to_gpio(irq);
+ u32 gpio = irq_to_gpio(d->irq);
set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 0);
}
-static void mxs_gpio_unmask_irq(u32 irq)
+static void mxs_gpio_unmask_irq(struct irq_data *d)
{
- u32 gpio = irq_to_gpio(irq);
+ u32 gpio = irq_to_gpio(d->irq);
set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 1);
}
static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset);
-static int mxs_gpio_set_irq_type(u32 irq, u32 type)
+static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type)
{
- u32 gpio = irq_to_gpio(irq);
+ u32 gpio = irq_to_gpio(d->irq);
u32 pin_mask = 1 << (gpio & 31);
struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32];
void __iomem *pin_addr;
* @param enable enable as wake-up if equal to non-zero
* @return This function returns 0 on success.
*/
-static int mxs_gpio_set_wake_irq(u32 irq, u32 enable)
+static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable)
{
- u32 gpio = irq_to_gpio(irq);
+ u32 gpio = irq_to_gpio(d->irq);
u32 gpio_idx = gpio & 0x1f;
struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32];
}
static struct irq_chip gpio_irq_chip = {
- .ack = mxs_gpio_ack_irq,
- .mask = mxs_gpio_mask_irq,
- .unmask = mxs_gpio_unmask_irq,
- .set_type = mxs_gpio_set_irq_type,
- .set_wake = mxs_gpio_set_wake_irq,
+ .irq_ack = mxs_gpio_ack_irq,
+ .irq_mask = mxs_gpio_mask_irq,
+ .irq_unmask = mxs_gpio_unmask_irq,
+ .irq_set_type = mxs_gpio_set_irq_type,
+ .irq_set_wake = mxs_gpio_set_wake_irq,
};
static void mxs_set_gpio_direction(struct gpio_chip *chip, unsigned offset,
static void __iomem *icoll_base = MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR);
-static void icoll_ack_irq(unsigned int irq)
+static void icoll_ack_irq(struct irq_data *d)
{
/*
* The Interrupt Collector is able to prioritize irqs.
icoll_base + HW_ICOLL_LEVELACK);
}
-static void icoll_mask_irq(unsigned int irq)
+static void icoll_mask_irq(struct irq_data *d)
{
__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
- icoll_base + HW_ICOLL_INTERRUPTn_CLR(irq));
+ icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->irq));
}
-static void icoll_unmask_irq(unsigned int irq)
+static void icoll_unmask_irq(struct irq_data *d)
{
__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
- icoll_base + HW_ICOLL_INTERRUPTn_SET(irq));
+ icoll_base + HW_ICOLL_INTERRUPTn_SET(d->irq));
}
static struct irq_chip mxs_icoll_chip = {
- .ack = icoll_ack_irq,
- .mask = icoll_mask_irq,
- .unmask = icoll_unmask_irq,
+ .irq_ack = icoll_ack_irq,
+ .irq_mask = icoll_mask_irq,
+ .irq_unmask = icoll_unmask_irq,
};
void __init icoll_init_irq(void)
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x80000000)
+#define PLAT_PHYS_OFFSET UL(0x80000000)
#endif
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
#define NS9XXX_CS2STAT_LENGTH UL(0x1000)
#define NS9XXX_CS3STAT_LENGTH UL(0x1000)
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
#include <plat/serial.h>
+#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
+#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
+
.pushsection .data
omap_uart_phys: .word 0x0
omap_uart_virt: .word 0x0
/* Use omap_uart_phys/virt if already configured */
9: mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled?
- ldreq \rp, =__virt_to_phys(omap_uart_phys) @ MMU not enabled
+ ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
ldrne \rp, =omap_uart_phys @ MMU enabled
add \rv, \rp, #4 @ omap_uart_virt
ldr \rp, [\rp, #0]
mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled?
ldreq \rp, =OMAP_UART_INFO @ MMU not enabled
- ldrne \rp, =__phys_to_virt(OMAP_UART_INFO) @ MMU enabled
+ ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled
ldr \rp, [\rp, #0]
/* Select the UART to use based on the UART1 scratchpad value */
98: add \rp, \rp, #0xff000000 @ phys base
mrc p15, 0, \rv, c1, c0
tst \rv, #1 @ MMU enabled?
- ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled
+ ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
ldrne \rv, =omap_uart_phys @ MMU enabled
str \rp, [\rv, #0]
sub \rp, \rp, #0xff000000 @ phys base
extern void omap1_pm_idle(void);
extern void omap1_pm_suspend(void);
-extern void omap7xx_cpu_suspend(unsigned short, unsigned short);
-extern void omap1510_cpu_suspend(unsigned short, unsigned short);
-extern void omap1610_cpu_suspend(unsigned short, unsigned short);
+extern void omap7xx_cpu_suspend(unsigned long, unsigned long);
+extern void omap1510_cpu_suspend(unsigned long, unsigned long);
+extern void omap1610_cpu_suspend(unsigned long, unsigned long);
extern void omap7xx_idle_loop_suspend(void);
extern void omap1510_idle_loop_suspend(void);
extern void omap1610_idle_loop_suspend(void);
*/
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ .align 3
ENTRY(omap7xx_cpu_suspend)
@ save registers on stack
#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
#ifdef CONFIG_ARCH_OMAP15XX
+ .align 3
ENTRY(omap1510_cpu_suspend)
@ save registers on stack
#endif /* CONFIG_ARCH_OMAP15XX */
#if defined(CONFIG_ARCH_OMAP16XX)
+ .align 3
ENTRY(omap1610_cpu_suspend)
@ save registers on stack
/*
* Reprograms ULPD and CKCTL.
*/
+ .align 3
ENTRY(omap1_sram_reprogram_clock)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
select CPU_V7
select ARM_GIC
select PL310_ERRATA_588369
+ select PL310_ERRATA_727915
select ARM_ERRATA_720789
select ARCH_HAS_OPP
select PM_OPP if PM
#define UART_OFFSET(addr) ((addr) & 0x00ffffff)
+#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
+#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
+
.pushsection .data
omap_uart_phys: .word 0
omap_uart_virt: .word 0
/* Use omap_uart_phys/virt if already configured */
10: mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled?
- ldreq \rp, =__virt_to_phys(omap_uart_phys) @ MMU not enabled
+ ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
ldrne \rp, =omap_uart_phys @ MMU enabled
add \rv, \rp, #4 @ omap_uart_virt
ldr \rp, [\rp, #0]
mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled?
ldreq \rp, =OMAP_UART_INFO @ MMU not enabled
- ldrne \rp, =__phys_to_virt(OMAP_UART_INFO) @ MMU enabled
+ ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled
ldr \rp, [\rp, #0]
/* Select the UART to use based on the UART1 scratchpad value */
95: ldr \rp, =ZOOM_UART_BASE
mrc p15, 0, \rv, c1, c0
tst \rv, #1 @ MMU enabled?
- ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled
+ ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
ldrne \rv, =omap_uart_phys @ MMU enabled
str \rp, [\rv, #0]
ldr \rp, =ZOOM_UART_VIRT
98: add \rp, \rp, #0x48000000 @ phys base
mrc p15, 0, \rv, c1, c0
tst \rv, #1 @ MMU enabled?
- ldreq \rv, =__virt_to_phys(omap_uart_phys) @ MMU not enabled
+ ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
ldrne \rv, =omap_uart_phys @ MMU enabled
str \rp, [\rv, #0]
sub \rp, \rp, #0x48000000 @ phys base
.macro busyuart,rd,rx
1001: mrc p15, 0, \rd, c1, c0
tst \rd, #1 @ MMU enabled?
- ldreq \rd, =__virt_to_phys(omap_uart_lsr) @ MMU not enabled
+ ldreq \rd, =omap_uart_v2p(omap_uart_lsr) @ MMU disabled
ldrne \rd, =omap_uart_lsr @ MMU enabled
ldr \rd, [\rd, #0]
ldrb \rd, [\rx, \rd]
omap_smc1(0x102, 0x0);
}
+static void omap4_l2x0_set_debug(unsigned long val)
+{
+ /* Program PL310 L2 Cache controller debug register */
+ omap_smc1(0x100, val);
+}
+
static int __init omap_l2_cache_init(void)
{
u32 aux_ctrl = 0;
* specific one
*/
outer_cache.disable = omap4_l2x0_disable;
+ outer_cache.set_debug = omap4_l2x0_set_debug;
return 0;
}
extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
void __iomem *sdrc_power);
extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
-extern void save_secure_ram_context(u32 *addr);
+extern int save_secure_ram_context(u32 *addr);
extern void omap3_save_scratchpad_contents(void);
extern unsigned int omap24xx_idle_loop_suspend_sz;
* Note: This code get's copied to internal SRAM at boot. When the OMAP
* wakes up it continues execution at the point it went to sleep.
*/
+ .align 3
ENTRY(omap24xx_idle_loop_suspend)
stmfd sp!, {r0, lr} @ save registers on stack
mov r0, #0 @ clear for mcr setup
* The DLL load value is not kept in RETENTION or OFF. It needs to be restored
* at wake
*/
+ .align 3
ENTRY(omap24xx_cpu_suspend)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
mov r3, #0x0 @ clear for mcr call
.text
/* Function to call rom code to save secure ram context */
+ .align 3
ENTRY(save_secure_ram_context)
stmfd sp!, {r1-r12, lr} @ save registers on stack
adr r3, api_params @ r3 points to parameters
* depending on the low power mode (non-OFF vs OFF modes),
* cf. 'Resume path for xxx mode' comments.
*/
+ .align 3
ENTRY(omap34xx_cpu_suspend)
stmfd sp!, {r0-r12, lr} @ save registers on stack
.text
+ .align 3
ENTRY(omap242x_sram_ddr_init)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
* r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
* PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
*/
+ .align 3
ENTRY(omap242x_sram_reprogram_sdrc)
stmfd sp!, {r0 - r10, lr} @ save registers on stack
mov r3, #0x0 @ clear for mrc call
/*
* Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
*/
+ .align 3
ENTRY(omap242x_sram_set_prcm)
stmfd sp!, {r0-r12, lr} @ regs to stack
adr r4, pbegin @ addr of preload start
.text
+ .align 3
ENTRY(omap243x_sram_ddr_init)
stmfd sp!, {r0 - r12, lr} @ save registers on stack
* r0 = [PRCM_FULL | PRCM_HALF] r1 = SDRC_DLLA_CTRL value r2 = [DDR | SDR]
* PRCM_FULL = 2, PRCM_HALF = 1, DDR = 1, SDR = 0
*/
+ .align 3
ENTRY(omap243x_sram_reprogram_sdrc)
stmfd sp!, {r0 - r10, lr} @ save registers on stack
mov r3, #0x0 @ clear for mrc call
/*
* Set dividers and pll. Also recalculate DLL value for DDR and unlock mode.
*/
+ .align 3
ENTRY(omap243x_sram_set_prcm)
stmfd sp!, {r0-r12, lr} @ regs to stack
adr r4, pbegin @ addr of preload start
* since it will cause the ARM MMU to attempt to walk the page tables.
* These crashes may be intermittent.
*/
+ .align 3
ENTRY(omap3_sram_configure_core_dpll)
stmfd sp!, {r1-r12, lr} @ store regs to stack
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x80000000)
+#define PLAT_PHYS_OFFSET UL(0x80000000)
#endif
.init_irq = balloon3_init_irq,
.timer = &pxa_timer,
.init_machine = balloon3_init,
- .boot_params = PHYS_OFFSET + 0x100,
+ .boot_params = PLAT_PHYS_OFFSET + 0x100,
MACHINE_END
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0xa0000000)
+#define PLAT_PHYS_OFFSET UL(0xa0000000)
#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
void cmx2xx_pci_adjust_zones(unsigned long *size, unsigned long *holes);
extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
/* sleep.S */
-extern void pxa25x_cpu_suspend(unsigned int);
-extern void pxa27x_cpu_suspend(unsigned int);
-extern void pxa_cpu_resume(void);
+extern void pxa25x_cpu_suspend(unsigned int, long);
+extern void pxa27x_cpu_suspend(unsigned int, long);
extern int pxa_pm_enter(suspend_state_t state);
extern int pxa_pm_prepare(void);
static int palmz72_pm_suspend(struct sys_device *dev, pm_message_t msg)
{
/* setup the resume_info struct for the original bootloader */
- palmz72_resume_info.resume_addr = (u32) pxa_cpu_resume;
+ palmz72_resume_info.resume_addr = (u32) cpu_resume;
/* Storing memory touched by ROM */
store_ptr = *PALMZ72_SAVE_DWORD;
EXPORT_SYMBOL_GPL(pxa_pm_enter);
-unsigned long sleep_phys_sp(void *sp)
-{
- return virt_to_phys(sp);
-}
-
static int pxa_pm_valid(suspend_state_t state)
{
if (pxa_cpu_pm_fns)
switch (state) {
case PM_SUSPEND_MEM:
- pxa25x_cpu_suspend(PWRMODE_SLEEP);
+ pxa25x_cpu_suspend(PWRMODE_SLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET);
break;
}
}
static int pxa25x_cpu_pm_prepare(void)
{
/* set resume return address */
- PSPR = virt_to_phys(pxa_cpu_resume);
+ PSPR = virt_to_phys(cpu_resume);
return 0;
}
pxa_cpu_standby();
break;
case PM_SUSPEND_MEM:
- pxa27x_cpu_suspend(pwrmode);
+ pxa27x_cpu_suspend(pwrmode, PLAT_PHYS_OFFSET - PAGE_OFFSET);
break;
}
}
static int pxa27x_cpu_pm_prepare(void)
{
/* set resume return address */
- PSPR = virt_to_phys(pxa_cpu_resume);
+ PSPR = virt_to_phys(cpu_resume);
return 0;
}
volatile unsigned long *p = (volatile void *)0xc0000000;
unsigned long saved_data = *p;
- extern void pxa3xx_cpu_suspend(void);
- extern void pxa3xx_cpu_resume(void);
+ extern void pxa3xx_cpu_suspend(long);
/* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
PSPR = 0x5c014000;
/* overwrite with the resume address */
- *p = virt_to_phys(pxa3xx_cpu_resume);
+ *p = virt_to_phys(cpu_resume);
- pxa3xx_cpu_suspend();
+ pxa3xx_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET);
*p = saved_data;
.text
-pxa_cpu_save_cp:
- @ get coprocessor registers
- mrc p14, 0, r3, c6, c0, 0 @ clock configuration, for turbo mode
- mrc p15, 0, r4, c15, c1, 0 @ CP access reg
- mrc p15, 0, r5, c13, c0, 0 @ PID
- mrc p15, 0, r6, c3, c0, 0 @ domain ID
- mrc p15, 0, r7, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r8, c1, c1, 0 @ auxiliary control reg
- mrc p15, 0, r9, c1, c0, 0 @ control reg
-
- bic r3, r3, #2 @ clear frequency change bit
-
- @ store them plus current virtual stack ptr on stack
- mov r10, sp
- stmfd sp!, {r3 - r10}
-
- mov pc, lr
-
-pxa_cpu_save_sp:
- @ preserve phys address of stack
- mov r0, sp
- str lr, [sp, #-4]!
- bl sleep_phys_sp
- ldr r1, =sleep_save_sp
- str r0, [r1]
- ldr pc, [sp], #4
-
#ifdef CONFIG_PXA3xx
/*
* pxa3xx_cpu_suspend() - forces CPU into sleep state (S2D3C4)
*
- * NOTE: unfortunately, pxa_cpu_save_cp can not be reused here since
- * the auxiliary control register address is different between pxa3xx
- * and pxa{25x,27x}
+ * r0 = v:p offset
*/
-
ENTRY(pxa3xx_cpu_suspend)
#ifndef CONFIG_IWMMXT
mra r2, r3, acc0
#endif
stmfd sp!, {r2 - r12, lr} @ save registers on stack
-
- mrc p14, 0, r3, c6, c0, 0 @ clock configuration, for turbo mode
- mrc p15, 0, r4, c15, c1, 0 @ CP access reg
- mrc p15, 0, r5, c13, c0, 0 @ PID
- mrc p15, 0, r6, c3, c0, 0 @ domain ID
- mrc p15, 0, r7, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg
- mrc p15, 0, r9, c1, c0, 0 @ control reg
-
- bic r3, r3, #2 @ clear frequency change bit
-
- @ store them plus current virtual stack ptr on stack
- mov r10, sp
- stmfd sp!, {r3 - r10}
-
- @ store physical address of stack pointer
- mov r0, sp
- bl sleep_phys_sp
- ldr r1, =sleep_save_sp
- str r0, [r1]
-
- @ clean data cache
- bl xsc3_flush_kern_cache_all
+ mov r1, r0
+ ldr r3, =pxa_cpu_resume @ resume function
+ bl cpu_suspend
mov r0, #0x06 @ S2D3C4 mode
mcr p14, 0, r0, c7, c0, 0 @ enter sleep
20: b 20b @ waiting for sleep
-
- .data
- .align 5
-/*
- * pxa3xx_cpu_resume
- */
-
-ENTRY(pxa3xx_cpu_resume)
-
- mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off
- msr cpsr_c, r0
-
- ldr r0, sleep_save_sp @ stack phys addr
- ldmfd r0, {r3 - r9, sp} @ CP regs + virt stack ptr
-
- mov r1, #0
- mcr p15, 0, r1, c7, c7, 0 @ invalidate I & D caches, BTB
- mcr p15, 0, r1, c7, c10, 4 @ drain write (&fill) buffer
- mcr p15, 0, r1, c7, c5, 4 @ flush prefetch buffer
- mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
-
- mcr p14, 0, r3, c6, c0, 0 @ clock configuration, turbo mode.
- mcr p15, 0, r4, c15, c1, 0 @ CP access reg
- mcr p15, 0, r5, c13, c0, 0 @ PID
- mcr p15, 0, r6, c3, c0, 0 @ domain ID
- mcr p15, 0, r7, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg
-
- @ temporarily map resume_turn_on_mmu into the page table,
- @ otherwise prefetch abort occurs after MMU is turned on
- mov r1, r7
- bic r1, r1, #0x00ff
- bic r1, r1, #0x3f00
- ldr r2, =0x542e
-
- adr r3, resume_turn_on_mmu
- mov r3, r3, lsr #20
- orr r4, r2, r3, lsl #20
- ldr r5, [r1, r3, lsl #2]
- str r4, [r1, r3, lsl #2]
-
- @ Mapping page table address in the page table
- mov r6, r1, lsr #20
- orr r7, r2, r6, lsl #20
- ldr r8, [r1, r6, lsl #2]
- str r7, [r1, r6, lsl #2]
-
- ldr r2, =pxa3xx_resume_after_mmu @ absolute virtual address
- b resume_turn_on_mmu @ cache align execution
-
- .text
-pxa3xx_resume_after_mmu:
- /* restore the temporary mapping */
- str r5, [r1, r3, lsl #2]
- str r8, [r1, r6, lsl #2]
- b resume_after_mmu
-
#endif /* CONFIG_PXA3xx */
#ifdef CONFIG_PXA27x
* Forces CPU into sleep state.
*
* r0 = value for PWRMODE M field for desired sleep state
+ * r1 = v:p offset
*/
-
ENTRY(pxa27x_cpu_suspend)
#ifndef CONFIG_IWMMXT
mra r2, r3, acc0
#endif
stmfd sp!, {r2 - r12, lr} @ save registers on stack
-
- bl pxa_cpu_save_cp
-
- mov r5, r0 @ save sleep mode
- bl pxa_cpu_save_sp
-
- @ clean data cache
- bl xscale_flush_kern_cache_all
+ mov r4, r0 @ save sleep mode
+ ldr r3, =pxa_cpu_resume @ resume function
+ bl cpu_suspend
@ Put the processor to sleep
@ (also workaround for sighting 28071)
@ prepare value for sleep mode
- mov r1, r5 @ sleep mode
+ mov r1, r4 @ sleep mode
@ prepare pointer to physical address 0 (virtual mapping in generic.c)
mov r2, #UNCACHED_PHYS_0
* Forces CPU into sleep state.
*
* r0 = value for PWRMODE M field for desired sleep state
+ * r1 = v:p offset
*/
ENTRY(pxa25x_cpu_suspend)
stmfd sp!, {r2 - r12, lr} @ save registers on stack
-
- bl pxa_cpu_save_cp
-
- mov r5, r0 @ save sleep mode
- bl pxa_cpu_save_sp
-
- @ clean data cache
- bl xscale_flush_kern_cache_all
-
+ mov r4, r0 @ save sleep mode
+ ldr r3, =pxa_cpu_resume @ resume function
+ bl cpu_suspend
@ prepare value for sleep mode
- mov r1, r5 @ sleep mode
+ mov r1, r4 @ sleep mode
@ prepare pointer to physical address 0 (virtual mapping in generic.c)
mov r2, #UNCACHED_PHYS_0
* pxa_cpu_resume()
*
* entry point from bootloader into kernel during resume
- *
- * Note: Yes, part of the following code is located into the .data section.
- * This is to allow sleep_save_sp to be accessed with a relative load
- * while we can't rely on any MMU translation. We could have put
- * sleep_save_sp in the .text section as well, but some setups might
- * insist on it to be truly read-only.
*/
-
- .data
- .align 5
-ENTRY(pxa_cpu_resume)
- mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off
- msr cpsr_c, r0
-
- ldr r0, sleep_save_sp @ stack phys addr
- ldr r2, =resume_after_mmu @ its absolute virtual address
- ldmfd r0, {r3 - r9, sp} @ CP regs + virt stack ptr
-
- mov r1, #0
- mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
- mcr p15, 0, r1, c7, c7, 0 @ invalidate I & D caches, BTB
-
- mcr p14, 0, r3, c6, c0, 0 @ clock configuration, turbo mode.
- mcr p15, 0, r4, c15, c1, 0 @ CP access reg
- mcr p15, 0, r5, c13, c0, 0 @ PID
- mcr p15, 0, r6, c3, c0, 0 @ domain ID
- mcr p15, 0, r7, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r8, c1, c1, 0 @ auxiliary control reg
- b resume_turn_on_mmu @ cache align execution
-
.align 5
-resume_turn_on_mmu:
- mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, caches, etc.
-
- @ Let us ensure we jump to resume_after_mmu only when the mcr above
- @ actually took effect. They call it the "cpwait" operation.
- mrc p15, 0, r0, c2, c0, 0 @ queue a dependency on CP15
- sub pc, r2, r0, lsr #32 @ jump to virtual addr
- nop
- nop
- nop
-
-sleep_save_sp:
- .word 0 @ preserve stack phys ptr here
-
- .text
-resume_after_mmu:
+pxa_cpu_resume:
ldmfd sp!, {r2, r3}
#ifndef CONFIG_IWMMXT
mar acc0, r2, r3
static void zeus_power_off(void)
{
local_irq_disable();
- pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP);
+ pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET);
}
#else
#define zeus_power_off NULL
config REALVIEW_EB_ARM11MP
bool "Support ARM11MPCore Tile"
depends on MACH_REALVIEW_EB
- select CPU_V6
+ select CPU_V6K
select ARCH_HAS_BARRIERS if SMP
help
Enable support for the ARM11MPCore tile fitted to the Realview(R)
config MACH_REALVIEW_PB11MP
bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
- select CPU_V6
+ select CPU_V6K
select ARM_GIC
select HAVE_PATA_PLATFORM
select ARCH_HAS_BARRIERS if SMP
the ARM11MPCore. This platform has an on-board ARM11MPCore and has
support for PCI-E and Compact Flash.
+# ARMv6 CPU without K extensions, but does have the new exclusive ops
config MACH_REALVIEW_PB1176
bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
select CPU_V6
* Physical DRAM offset.
*/
#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
-#define PHYS_OFFSET UL(0x70000000)
+#define PLAT_PHYS_OFFSET UL(0x70000000)
#else
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
#if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA)
MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PHYS_OFFSET + 0x00000100,
+ .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
.fixup = realview_fixup,
.map_io = realview_eb_map_io,
.init_irq = gic_init_irq,
MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PHYS_OFFSET + 0x00000100,
+ .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
.fixup = realview_pb1176_fixup,
.map_io = realview_pb1176_map_io,
.init_irq = gic_init_irq,
MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PHYS_OFFSET + 0x00000100,
+ .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
.fixup = realview_fixup,
.map_io = realview_pb11mp_map_io,
.init_irq = gic_init_irq,
MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PHYS_OFFSET + 0x00000100,
+ .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
.fixup = realview_fixup,
.map_io = realview_pba8_map_io,
.init_irq = gic_init_irq,
MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PHYS_OFFSET + 0x00000100,
+ .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
.fixup = realview_pbx_fixup,
.map_io = realview_pbx_map_io,
.init_irq = gic_init_irq,
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x10000000)
+#define PLAT_PHYS_OFFSET UL(0x10000000)
/*
* Cache flushing area - ROM
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x0C000000)
+#define PLAT_PHYS_OFFSET UL(0x0C000000)
#endif
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x30000000)
+#define PLAT_PHYS_OFFSET UL(0x30000000)
#endif
#ifndef __ASM_ARCH_24A0_MEMORY_H
#define __ASM_ARCH_24A0_MEMORY_H __FILE__
-#define PHYS_OFFSET UL(0x10000000)
+#define PLAT_PHYS_OFFSET UL(0x10000000)
#define __virt_to_bus(x) __virt_to_phys(x)
#define __bus_to_virt(x) __phys_to_virt(x)
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x50000000)
+#define PLAT_PHYS_OFFSET UL(0x50000000)
#define CONSISTENT_DMA_SIZE SZ_8M
* code after resume.
*
* entry:
- * r0 = pointer to the save block
+ * r1 = v:p offset
*/
ENTRY(s3c_cpu_save)
stmfd sp!, { r4 - r12, lr }
-
- mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
- mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
- mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control
- mrc p15, 0, r9, c1, c0, 0 @ Control register
- mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
- mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls
-
- stmia r0, { r4 - r13 } @ Save CP registers and SP
-
- @@ save our state to ram
- bl s3c_pm_cb_flushcache
+ ldr r3, =resume_with_mmu
+ bl cpu_suspend
@@ call final suspend code
ldr r0, =pm_cpu_sleep
resume_with_mmu:
ldmfd sp!, { r4 - r12, pc } @ return, from sp from s3c_cpu_save
- .data
-
- /* the next bit is code, but it requires easy access to the
- * s3c_sleep_save_phys data before the MMU is switched on, so
- * we store the code that needs this variable in the .data where
- * the value can be written to (the .text segment is RO).
- */
-
- .global s3c_sleep_save_phys
-s3c_sleep_save_phys:
- .word 0
-
/* Sleep magic, the word before the resume entry point so that the
* bootloader can check for a resumeable image. */
orr r0, r0, #1 << 15 @ GPN15
str r0, [ r3, #S3C64XX_GPNDAT ]
#endif
-
- /* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches
- * are thoroughly cleaned just in case the bootloader didn't do it
- * for us. */
- mov r0, #0
- mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache
- mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
- mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache
- mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
- @@mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs
- @@mcr p15, 0, r0, c7, c7, 0 @ Invalidate I + D caches
-
- ldr r0, s3c_sleep_save_phys
- ldmia r0, { r4 - r13 }
-
- mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mcr p15, 0, r5, c3, c0, 0 @ Domain ID
- mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
- mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
- mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control
- mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register
-
- mov r0, #0 @ restore copro access controls
- mcr p15, 0, r11, c1, c0, 2 @ Co-processor access controls
- mcr p15, 0, r0, c7, c5, 4
-
- ldr r2, =resume_with_mmu
- mcr p15, 0, r9, c1, c0, 0 /* turn mmu back on */
- nop
- mov pc, r2 /* jump back */
-
- .end
+ b cpu_resume
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x20000000)
+#define PLAT_PHYS_OFFSET UL(0x20000000)
#define CONSISTENT_DMA_SIZE SZ_8M
#endif /* __ASM_ARCH_MEMORY_H */
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H __FILE__
-#define PHYS_OFFSET UL(0x20000000)
+#define PLAT_PHYS_OFFSET UL(0x20000000)
#define CONSISTENT_DMA_SIZE SZ_8M
#endif /* __ASM_ARCH_MEMORY_H */
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x20000000)
+#define PLAT_PHYS_OFFSET UL(0x20000000)
#endif
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x20000000)
+#define PLAT_PHYS_OFFSET UL(0x20000000)
#define CONSISTENT_DMA_SIZE (SZ_8M + SZ_4M + SZ_2M)
/*
/* s3c_cpu_save
*
* entry:
- * r0 = save address (virtual addr of s3c_sleep_save_phys)
+ * r1 = v:p offset
*/
ENTRY(s3c_cpu_save)
stmfd sp!, { r3 - r12, lr }
-
- mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
- mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
- mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control
- mrc p15, 0, r9, c1, c0, 0 @ Control register
- mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
- mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls
- mrc p15, 0, r12, c10, c2, 0 @ Read PRRR
- mrc p15, 0, r3, c10, c2, 1 @ READ NMRR
-
- stmia r0, { r3 - r13 }
-
- bl s3c_pm_cb_flushcache
+ ldr r3, =resume_with_mmu
+ bl cpu_suspend
ldr r0, =pm_cpu_sleep
ldr r0, [ r0 ]
mov pc, r0
resume_with_mmu:
- /*
- * After MMU is turned on, restore the previous MMU table.
- */
- ldr r9 , =(PAGE_OFFSET - PHYS_OFFSET)
- add r4, r4, r9
- str r12, [r4]
-
ldmfd sp!, { r3 - r12, pc }
.ltorg
- .data
-
- .global s3c_sleep_save_phys
-s3c_sleep_save_phys:
- .word 0
-
/* sleep magic, to allow the bootloader to check for an valid
* image to resume to. Must be the first word before the
* s3c_cpu_resume entry.
*/
ENTRY(s3c_cpu_resume)
- mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
- msr cpsr_c, r0
-
- mov r1, #0
- mcr p15, 0, r1, c8, c7, 0 @ invalidate TLBs
- mcr p15, 0, r1, c7, c5, 0 @ invalidate I Cache
-
- ldr r0, s3c_sleep_save_phys @ address of restore block
- ldmia r0, { r3 - r13 }
-
- mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mcr p15, 0, r5, c3, c0, 0 @ Domain ID
-
- mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control
- mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
- mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
-
- mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register
-
- mov r0, #0
- mcr p15, 0, r0, c8, c7, 0 @ Invalidate I & D TLB
-
- mov r0, #0 @ restore copro access
- mcr p15, 0, r11, c1, c0, 2 @ Co-processor access
- mcr p15, 0, r0, c7, c5, 4
-
- mcr p15, 0, r12, c10, c2, 0 @ write PRRR
- mcr p15, 0, r3, c10, c2, 1 @ write NMRR
-
- /*
- * In Cortex-A8, when MMU is turned on, the pipeline is flushed.
- * And there are no valid entries in the MMU table at this point.
- * So before turning on the MMU, the MMU entry for the DRAM address
- * range is added. After the MMU is turned on, the other entries
- * in the MMU table will be restored.
- */
-
- /* r6 = Translation Table BASE0 */
- mov r4, r6
- mov r4, r4, LSR #14
- mov r4, r4, LSL #14
-
- /* Load address for adding to MMU table list */
- ldr r11, =0xE010F000 @ INFORM0 reg.
- ldr r10, [r11, #0]
- mov r10, r10, LSR #18
- bic r10, r10, #0x3
- orr r4, r4, r10
-
- /* Calculate MMU table entry */
- mov r10, r10, LSL #18
- ldr r5, =0x40E
- orr r10, r10, r5
-
- /* Back up originally data */
- ldr r12, [r4]
-
- /* Add calculated MMU table entry into MMU table list */
- str r10, [r4]
-
- ldr r2, =resume_with_mmu
- mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, etc
-
- nop
- nop
- nop
- nop
- nop @ second-to-last before mmu
-
- mov pc, r2 @ go back to virtual address
-
- .ltorg
+ b cpu_resume
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H __FILE__
-#define PHYS_OFFSET UL(0x40000000)
+#define PLAT_PHYS_OFFSET UL(0x40000000)
/* Maximum of 256MiB in one bank */
#define MAX_PHYSMEM_BITS 32
/*
* Physical DRAM offset is 0xc0000000 on the SA1100
*/
-#define PHYS_OFFSET UL(0xc0000000)
+#define PLAT_PHYS_OFFSET UL(0xc0000000)
#ifndef __ASSEMBLY__
#include <asm/system.h>
#include <asm/mach/time.h>
-extern void sa1100_cpu_suspend(void);
-extern void sa1100_cpu_resume(void);
+extern void sa1100_cpu_suspend(long);
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
RCSR = RCSR_HWR | RCSR_SWR | RCSR_WDR | RCSR_SMR;
/* set resume return address */
- PSPR = virt_to_phys(sa1100_cpu_resume);
+ PSPR = virt_to_phys(cpu_resume);
/* go zzz */
- sa1100_cpu_suspend();
+ sa1100_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET);
cpu_init();
return 0;
}
-unsigned long sleep_phys_sp(void *sp)
-{
- return virt_to_phys(sp);
-}
-
static const struct platform_suspend_ops sa11x0_pm_ops = {
.enter = sa11x0_pm_enter,
.valid = suspend_valid_only_mem,
#include <asm/assembler.h>
#include <mach/hardware.h>
-
-
.text
-
-
-
/*
* sa1100_cpu_suspend()
*
*/
ENTRY(sa1100_cpu_suspend)
-
stmfd sp!, {r4 - r12, lr} @ save registers on stack
-
- @ get coprocessor registers
- mrc p15, 0, r4, c3, c0, 0 @ domain ID
- mrc p15, 0, r5, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r6, c13, c0, 0 @ PID
- mrc p15, 0, r7, c1, c0, 0 @ control reg
-
- @ store them plus current virtual stack ptr on stack
- mov r8, sp
- stmfd sp!, {r4 - r8}
-
- @ preserve phys address of stack
- mov r0, sp
- bl sleep_phys_sp
- ldr r1, =sleep_save_sp
- str r0, [r1]
-
- @ clean data cache and invalidate WB
- bl v4wb_flush_kern_cache_all
+ mov r1, r0
+ ldr r3, =sa1100_cpu_resume @ return function
+ bl cpu_suspend
@ disable clock switching
mcr p15, 0, r1, c15, c2, 2
* cpu_sa1100_resume()
*
* entry point from bootloader into kernel during resume
- *
- * Note: Yes, part of the following code is located into the .data section.
- * This is to allow sleep_save_sp to be accessed with a relative load
- * while we can't rely on any MMU translation. We could have put
- * sleep_save_sp in the .text section as well, but some setups might
- * insist on it to be truly read-only.
*/
-
- .data
- .align 5
-ENTRY(sa1100_cpu_resume)
- mov r0, #PSR_F_BIT | PSR_I_BIT | SVC_MODE
- msr cpsr_c, r0 @ set SVC, irqs off
-
- ldr r0, sleep_save_sp @ stack phys addr
- ldr r2, =resume_after_mmu @ its absolute virtual address
- ldmfd r0, {r4 - r7, sp} @ CP regs + virt stack ptr
-
- mov r1, #0
- mcr p15, 0, r1, c8, c7, 0 @ flush I+D TLBs
- mcr p15, 0, r1, c7, c7, 0 @ flush I&D cache
- mcr p15, 0, r1, c9, c0, 0 @ invalidate RB
- mcr p15, 0, r1, c9, c0, 5 @ allow user space to use RB
-
- mcr p15, 0, r4, c3, c0, 0 @ domain ID
- mcr p15, 0, r5, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r6, c13, c0, 0 @ PID
- b resume_turn_on_mmu @ cache align execution
-
.align 5
-resume_turn_on_mmu:
- mcr p15, 0, r7, c1, c0, 0 @ turn on MMU, caches, etc.
- nop
- mov pc, r2 @ jump to virtual addr
- nop
- nop
- nop
-
-sleep_save_sp:
- .word 0 @ preserve stack phys ptr here
-
- .text
-resume_after_mmu:
+sa1100_cpu_resume:
mcr p15, 0, r1, c15, c1, 2 @ enable clock switching
ldmfd sp!, {r4 - r12, pc} @ return to caller
-
-
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x08000000)
+#define PLAT_PHYS_OFFSET UL(0x08000000)
#ifndef __ASSEMBLY__
#ifndef __ASM_MACH_MEMORY_H
#define __ASM_MACH_MEMORY_H
-#define PHYS_OFFSET UL(CONFIG_MEMORY_START)
+#define PLAT_PHYS_OFFSET UL(CONFIG_MEMORY_START)
#define MEM_SIZE UL(CONFIG_MEMORY_SIZE)
/* DMA memory at 0xf6000000 - 0xffdfffff */
--- /dev/null
+#ifndef MMCIF_AP4EB_H
+#define MMCIF_AP4EB_H
+
+#define PORT185CR (void __iomem *)0xe60520b9
+#define PORT186CR (void __iomem *)0xe60520ba
+#define PORT187CR (void __iomem *)0xe60520bb
+#define PORT188CR (void __iomem *)0xe60520bc
+
+#define PORTR191_160DR (void __iomem *)0xe6056014
+
+static inline void mmcif_init_progress(void)
+{
+ /* Initialise LEDS1-4
+ * registers: PORT185CR-PORT188CR (LED1-LED4 Control)
+ * value: 0x10 - enable output
+ */
+ __raw_writeb(0x10, PORT185CR);
+ __raw_writeb(0x10, PORT186CR);
+ __raw_writeb(0x10, PORT187CR);
+ __raw_writeb(0x10, PORT188CR);
+}
+
+static inline void mmcif_update_progress(int n)
+{
+ __raw_writel((__raw_readl(PORTR191_160DR) & ~(0xf << 25)) |
+ (1 << (25 + n)), PORTR191_160DR);
+}
+
+#endif /* MMCIF_AP4EB_H */
--- /dev/null
+#ifndef MMCIF_MACKEREL_H
+#define MMCIF_MACKEREL_H
+
+#define PORT0CR (void __iomem *)0xe6051000
+#define PORT1CR (void __iomem *)0xe6051001
+#define PORT2CR (void __iomem *)0xe6051002
+#define PORT159CR (void __iomem *)0xe605009f
+
+#define PORTR031_000DR (void __iomem *)0xe6055000
+#define PORTL159_128DR (void __iomem *)0xe6054010
+
+static inline void mmcif_init_progress(void)
+{
+ /* Initialise LEDS0-3
+ * registers: PORT0CR-PORT2CR,PORT159CR (LED0-LED3 Control)
+ * value: 0x10 - enable output
+ */
+ __raw_writeb(0x10, PORT0CR);
+ __raw_writeb(0x10, PORT1CR);
+ __raw_writeb(0x10, PORT2CR);
+ __raw_writeb(0x10, PORT159CR);
+}
+
+static inline void mmcif_update_progress(int n)
+{
+ unsigned a = 0, b = 0;
+
+ if (n < 3)
+ a = 1 << n;
+ else
+ b = 1 << 31;
+
+ __raw_writel((__raw_readl(PORTR031_000DR) & ~0x7) | a,
+ PORTR031_000DR);
+ __raw_writel((__raw_readl(PORTL159_128DR) & ~(1 << 31)) | b,
+ PORTL159_128DR);
+}
+
+#endif /* MMCIF_MACKEREL_H */
--- /dev/null
+#ifndef MMCIF_H
+#define MMCIF_H
+
+/**************************************************
+ *
+ * board specific settings
+ *
+ **************************************************/
+
+#ifdef CONFIG_MACH_AP4EVB
+#include "mach/mmcif-ap4eb.h"
+#elif CONFIG_MACH_MACKEREL
+#include "mach/mmcif-mackerel.h"
+#else
+#error "unsupported board."
+#endif
+
+#endif /* MMCIF_H */
#include <linux/init.h>
#include <linux/kernel.h>
-#include <mach/misc_regs.h>
#include <plat/clock.h>
+#include <mach/misc_regs.h>
/* root clks */
/* 32 KHz oscillator clock */
};
/* clock derived from 24 MHz osc clk */
+/* pll masks structure */
+static struct pll_clk_masks pll1_masks = {
+ .mode_mask = PLL_MODE_MASK,
+ .mode_shift = PLL_MODE_SHIFT,
+ .norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
+ .norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
+ .dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
+ .dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
+ .div_p_mask = PLL_DIV_P_MASK,
+ .div_p_shift = PLL_DIV_P_SHIFT,
+ .div_n_mask = PLL_DIV_N_MASK,
+ .div_n_shift = PLL_DIV_N_SHIFT,
+};
+
/* pll1 configuration structure */
static struct pll_clk_config pll1_config = {
.mode_reg = PLL1_CTR,
.cfg_reg = PLL1_FRQ,
+ .masks = &pll1_masks,
+};
+
+/* pll rate configuration table, in ascending order of rates */
+struct pll_rate_tbl pll_rtbl[] = {
+ {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
+ {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
};
/* PLL1 clock */
static struct clk pll1_clk = {
+ .flags = ENABLED_ON_INIT,
.pclk = &osc_24m_clk,
.en_reg = PLL1_CTR,
.en_reg_bit = PLL_ENABLE,
- .recalc = &pll1_clk_recalc,
+ .calc_rate = &pll_calc_rate,
+ .recalc = &pll_clk_recalc,
+ .set_rate = &pll_clk_set_rate,
+ .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
.private_data = &pll1_config,
};
.recalc = &follow_parent,
};
+/* ahb masks structure */
+static struct bus_clk_masks ahb_masks = {
+ .mask = PLL_HCLK_RATIO_MASK,
+ .shift = PLL_HCLK_RATIO_SHIFT,
+};
+
/* ahb configuration structure */
static struct bus_clk_config ahb_config = {
.reg = CORE_CLK_CFG,
- .mask = PLL_HCLK_RATIO_MASK,
- .shift = PLL_HCLK_RATIO_SHIFT,
+ .masks = &ahb_masks,
+};
+
+/* ahb rate configuration table, in ascending order of rates */
+struct bus_rate_tbl bus_rtbl[] = {
+ {.div = 3}, /* == parent divided by 4 */
+ {.div = 2}, /* == parent divided by 3 */
+ {.div = 1}, /* == parent divided by 2 */
+ {.div = 0}, /* == parent divided by 1 */
};
/* ahb clock */
static struct clk ahb_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll1_clk,
+ .calc_rate = &bus_calc_rate,
.recalc = &bus_clk_recalc,
+ .set_rate = &bus_clk_set_rate,
+ .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
.private_data = &ahb_config,
};
-/* uart configurations */
-static struct aux_clk_config uart_config = {
+/* auxiliary synthesizers masks */
+static struct aux_clk_masks aux_masks = {
+ .eq_sel_mask = AUX_EQ_SEL_MASK,
+ .eq_sel_shift = AUX_EQ_SEL_SHIFT,
+ .eq1_mask = AUX_EQ1_SEL,
+ .eq2_mask = AUX_EQ2_SEL,
+ .xscale_sel_mask = AUX_XSCALE_MASK,
+ .xscale_sel_shift = AUX_XSCALE_SHIFT,
+ .yscale_sel_mask = AUX_YSCALE_MASK,
+ .yscale_sel_shift = AUX_YSCALE_SHIFT,
+};
+
+/* uart synth configurations */
+static struct aux_clk_config uart_synth_config = {
.synth_reg = UART_CLK_SYNT,
+ .masks = &aux_masks,
+};
+
+/* aux rate configuration table, in ascending order of rates */
+struct aux_rate_tbl aux_rtbl[] = {
+ /* For PLL1 = 332 MHz */
+ {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
+ {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
+ {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
+};
+
+/* uart synth clock */
+static struct clk uart_synth_clk = {
+ .en_reg = UART_CLK_SYNT,
+ .en_reg_bit = AUX_SYNT_ENB,
+ .pclk = &pll1_clk,
+ .calc_rate = &aux_calc_rate,
+ .recalc = &aux_clk_recalc,
+ .set_rate = &aux_clk_set_rate,
+ .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
+ .private_data = &uart_synth_config,
};
/* uart parents */
static struct pclk_info uart_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &uart_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
.en_reg_bit = UART_CLK_ENB,
.pclk_sel = &uart_pclk_sel,
.pclk_sel_shift = UART_CLK_SHIFT,
- .recalc = &aux_clk_recalc,
- .private_data = &uart_config,
+ .recalc = &follow_parent,
};
/* firda configurations */
-static struct aux_clk_config firda_config = {
+static struct aux_clk_config firda_synth_config = {
.synth_reg = FIRDA_CLK_SYNT,
+ .masks = &aux_masks,
+};
+
+/* firda synth clock */
+static struct clk firda_synth_clk = {
+ .en_reg = FIRDA_CLK_SYNT,
+ .en_reg_bit = AUX_SYNT_ENB,
+ .pclk = &pll1_clk,
+ .calc_rate = &aux_calc_rate,
+ .recalc = &aux_clk_recalc,
+ .set_rate = &aux_clk_set_rate,
+ .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
+ .private_data = &firda_synth_config,
};
/* firda parents */
static struct pclk_info firda_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &firda_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
.en_reg_bit = FIRDA_CLK_ENB,
.pclk_sel = &firda_pclk_sel,
.pclk_sel_shift = FIRDA_CLK_SHIFT,
- .recalc = &aux_clk_recalc,
- .private_data = &firda_config,
+ .recalc = &follow_parent,
+};
+
+/* gpt synthesizer masks */
+static struct gpt_clk_masks gpt_masks = {
+ .mscale_sel_mask = GPT_MSCALE_MASK,
+ .mscale_sel_shift = GPT_MSCALE_SHIFT,
+ .nscale_sel_mask = GPT_NSCALE_MASK,
+ .nscale_sel_shift = GPT_NSCALE_SHIFT,
+};
+
+/* gpt rate configuration table, in ascending order of rates */
+struct gpt_rate_tbl gpt_rtbl[] = {
+ /* For pll1 = 332 MHz */
+ {.mscale = 4, .nscale = 0}, /* 41.5 MHz */
+ {.mscale = 2, .nscale = 0}, /* 55.3 MHz */
+ {.mscale = 1, .nscale = 0}, /* 83 MHz */
+};
+
+/* gpt0 synth clk config*/
+static struct gpt_clk_config gpt0_synth_config = {
+ .synth_reg = PRSC1_CLK_CFG,
+ .masks = &gpt_masks,
+};
+
+/* gpt synth clock */
+static struct clk gpt0_synth_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .calc_rate = &gpt_calc_rate,
+ .recalc = &gpt_clk_recalc,
+ .set_rate = &gpt_clk_set_rate,
+ .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+ .private_data = &gpt0_synth_config,
};
/* gpt parents */
-static struct pclk_info gpt_pclk_info[] = {
+static struct pclk_info gpt0_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &gpt0_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
/* gpt parent select structure */
-static struct pclk_sel gpt_pclk_sel = {
- .pclk_info = gpt_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt_pclk_info),
+static struct pclk_sel gpt0_pclk_sel = {
+ .pclk_info = gpt0_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = GPT_CLK_MASK,
};
-/* gpt0 configurations */
-static struct aux_clk_config gpt0_config = {
- .synth_reg = PRSC1_CLK_CFG,
-};
-
/* gpt0 timer clock */
static struct clk gpt0_clk = {
.flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel = &gpt0_pclk_sel,
.pclk_sel_shift = GPT0_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt0_config,
+ .recalc = &follow_parent,
};
-/* gpt1 configurations */
-static struct aux_clk_config gpt1_config = {
+/* gpt1 synth clk configurations */
+static struct gpt_clk_config gpt1_synth_config = {
.synth_reg = PRSC2_CLK_CFG,
+ .masks = &gpt_masks,
+};
+
+/* gpt1 synth clock */
+static struct clk gpt1_synth_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .calc_rate = &gpt_calc_rate,
+ .recalc = &gpt_clk_recalc,
+ .set_rate = &gpt_clk_set_rate,
+ .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+ .private_data = &gpt1_synth_config,
+};
+
+static struct pclk_info gpt1_pclk_info[] = {
+ {
+ .pclk = &gpt1_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
+ }, {
+ .pclk = &pll3_48m_clk,
+ .pclk_val = AUX_CLK_PLL3_VAL,
+ },
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt1_pclk_sel = {
+ .pclk_info = gpt1_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt1_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt1 timer clock */
static struct clk gpt1_clk = {
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = GPT1_CLK_ENB,
- .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel = &gpt1_pclk_sel,
.pclk_sel_shift = GPT1_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt1_config,
+ .recalc = &follow_parent,
};
-/* gpt2 configurations */
-static struct aux_clk_config gpt2_config = {
+/* gpt2 synth clk configurations */
+static struct gpt_clk_config gpt2_synth_config = {
.synth_reg = PRSC3_CLK_CFG,
+ .masks = &gpt_masks,
+};
+
+/* gpt1 synth clock */
+static struct clk gpt2_synth_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .calc_rate = &gpt_calc_rate,
+ .recalc = &gpt_clk_recalc,
+ .set_rate = &gpt_clk_set_rate,
+ .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+ .private_data = &gpt2_synth_config,
+};
+
+static struct pclk_info gpt2_pclk_info[] = {
+ {
+ .pclk = &gpt2_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
+ }, {
+ .pclk = &pll3_48m_clk,
+ .pclk_val = AUX_CLK_PLL3_VAL,
+ },
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt2_pclk_sel = {
+ .pclk_info = gpt2_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt2_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt2 timer clock */
static struct clk gpt2_clk = {
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = GPT2_CLK_ENB,
- .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel = &gpt2_pclk_sel,
.pclk_sel_shift = GPT2_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt2_config,
+ .recalc = &follow_parent,
};
/* clock derived from pll3 clk */
.recalc = &follow_parent,
};
-/* clcd clock */
-static struct clk clcd_clk = {
- .flags = ALWAYS_ENABLED,
- .pclk = &pll3_48m_clk,
- .recalc = &follow_parent,
+/* clock derived from ahb clk */
+/* apb masks structure */
+static struct bus_clk_masks apb_masks = {
+ .mask = HCLK_PCLK_RATIO_MASK,
+ .shift = HCLK_PCLK_RATIO_SHIFT,
};
-/* clock derived from ahb clk */
/* apb configuration structure */
static struct bus_clk_config apb_config = {
.reg = CORE_CLK_CFG,
- .mask = HCLK_PCLK_RATIO_MASK,
- .shift = HCLK_PCLK_RATIO_SHIFT,
+ .masks = &apb_masks,
};
/* apb clock */
static struct clk apb_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &ahb_clk,
+ .calc_rate = &bus_calc_rate,
.recalc = &bus_clk_recalc,
+ .set_rate = &bus_clk_set_rate,
+ .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
.private_data = &apb_config,
};
.recalc = &follow_parent,
};
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+/* emi clock */
+static struct clk emi_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &ahb_clk,
+ .recalc = &follow_parent,
+};
+#endif
+
/* ssp clock */
-static struct clk ssp_clk = {
+static struct clk ssp0_clk = {
.pclk = &apb_clk,
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = SSP_CLK_ENB,
static struct clk dummy_apb_pclk;
+#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \
+ defined(CONFIG_MACH_SPEAR320)
+/* fsmc clock */
+static struct clk fsmc_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &ahb_clk,
+ .recalc = &follow_parent,
+};
+#endif
+
+/* common clocks to spear310 and spear320 */
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+/* uart1 clock */
+static struct clk uart1_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* uart2 clock */
+static struct clk uart2_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
+
+/* common clocks to spear300 and spear320 */
+#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
+/* clcd clock */
+static struct clk clcd_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll3_48m_clk,
+ .recalc = &follow_parent,
+};
+
+/* sdhci clock */
+static struct clk sdhci_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &ahb_clk,
+ .recalc = &follow_parent,
+};
+#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
+
+/* spear300 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR300
+/* gpio1 clock */
+static struct clk gpio1_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* keyboard clock */
+static struct clk kbd_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+#endif
+
+/* spear310 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR310
+/* uart3 clock */
+static struct clk uart3_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* uart4 clock */
+static struct clk uart4_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* uart5 clock */
+static struct clk uart5_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+#endif
+
+/* spear320 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR320
+/* can0 clock */
+static struct clk can0_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* can1 clock */
+static struct clk can1_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* i2c1 clock */
+static struct clk i2c1_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &ahb_clk,
+ .recalc = &follow_parent,
+};
+
+/* ssp1 clock */
+static struct clk ssp1_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* ssp2 clock */
+static struct clk ssp2_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+
+/* pwm clock */
+static struct clk pwm_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &apb_clk,
+ .recalc = &follow_parent,
+};
+#endif
+
/* array of all spear 3xx clock lookups */
static struct clk_lookup spear_clk_lookups[] = {
- { .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
+ { .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
/* root clks */
{ .con_id = "osc_32k_clk", .clk = &osc_32k_clk},
{ .con_id = "osc_24m_clk", .clk = &osc_24m_clk},
/* clock derived from 32 KHz osc clk */
- { .dev_id = "rtc", .clk = &rtc_clk},
+ { .dev_id = "rtc-spear", .clk = &rtc_clk},
/* clock derived from 24 MHz osc clk */
{ .con_id = "pll1_clk", .clk = &pll1_clk},
{ .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk},
/* clock derived from pll1 clk */
{ .con_id = "cpu_clk", .clk = &cpu_clk},
{ .con_id = "ahb_clk", .clk = &ahb_clk},
+ { .con_id = "uart_synth_clk", .clk = &uart_synth_clk},
+ { .con_id = "firda_synth_clk", .clk = &firda_synth_clk},
+ { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk},
+ { .con_id = "gpt1_synth_clk", .clk = &gpt1_synth_clk},
+ { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk},
{ .dev_id = "uart", .clk = &uart_clk},
{ .dev_id = "firda", .clk = &firda_clk},
{ .dev_id = "gpt0", .clk = &gpt0_clk},
{ .dev_id = "gpt1", .clk = &gpt1_clk},
{ .dev_id = "gpt2", .clk = &gpt2_clk},
/* clock derived from pll3 clk */
- { .dev_id = "usbh", .clk = &usbh_clk},
- { .dev_id = "usbd", .clk = &usbd_clk},
- { .dev_id = "clcd", .clk = &clcd_clk},
+ { .dev_id = "designware_udc", .clk = &usbd_clk},
+ { .con_id = "usbh_clk", .clk = &usbh_clk},
/* clock derived from ahb clk */
{ .con_id = "apb_clk", .clk = &apb_clk},
- { .dev_id = "i2c", .clk = &i2c_clk},
+ { .dev_id = "i2c_designware.0", .clk = &i2c_clk},
{ .dev_id = "dma", .clk = &dma_clk},
{ .dev_id = "jpeg", .clk = &jpeg_clk},
{ .dev_id = "gmac", .clk = &gmac_clk},
{ .dev_id = "c3", .clk = &c3_clk},
/* clock derived from apb clk */
{ .dev_id = "adc", .clk = &adc_clk},
- { .dev_id = "ssp", .clk = &ssp_clk},
+ { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk},
{ .dev_id = "gpio", .clk = &gpio_clk},
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+ { .dev_id = "physmap-flash", .clk = &emi_clk},
+#endif
+#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \
+ defined(CONFIG_MACH_SPEAR320)
+ { .con_id = "fsmc", .clk = &fsmc_clk},
+#endif
+
+/* common clocks to spear310 and spear320 */
+#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
+ { .dev_id = "uart1", .clk = &uart1_clk},
+ { .dev_id = "uart2", .clk = &uart2_clk},
+#endif
+
+ /* common clock to spear300 and spear320 */
+#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
+ { .dev_id = "clcd", .clk = &clcd_clk},
+ { .dev_id = "sdhci", .clk = &sdhci_clk},
+#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
+
+ /* spear300 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR300
+ { .dev_id = "gpio1", .clk = &gpio1_clk},
+ { .dev_id = "keyboard", .clk = &kbd_clk},
+#endif
+
+ /* spear310 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR310
+ { .dev_id = "uart3", .clk = &uart3_clk},
+ { .dev_id = "uart4", .clk = &uart4_clk},
+ { .dev_id = "uart5", .clk = &uart5_clk},
+
+#endif
+ /* spear320 machine specific clock structures */
+#ifdef CONFIG_MACH_SPEAR320
+ { .dev_id = "c_can_platform.0", .clk = &can0_clk},
+ { .dev_id = "c_can_platform.1", .clk = &can1_clk},
+ { .dev_id = "i2c_designware.1", .clk = &i2c1_clk},
+ { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk},
+ { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk},
+ { .dev_id = "pwm", .clk = &pwm_clk},
+#endif
};
void __init clk_init(void)
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <mach/spear.h>
#include <asm/hardware/vic.h>
+#include <mach/hardware.h>
.macro disable_fiq
.endm
#ifndef __MACH_GENERIC_H
#define __MACH_GENERIC_H
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
#include <plat/padmux.h>
/* spear3xx declarations */
/* Add spear3xx family device structure declarations here */
extern struct amba_device gpio_device;
extern struct amba_device uart_device;
-extern struct sys_timer spear_sys_timer;
+extern struct sys_timer spear3xx_timer;
/* Add spear3xx family function declarations here */
void __init clk_init(void);
+void __init spear_setup_timer(void);
void __init spear3xx_map_io(void);
void __init spear3xx_init_irq(void);
void __init spear3xx_init(void);
-void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size);
/* pad mux declarations */
#define PMX_FIRDA_MASK (1 << 14)
extern struct pmx_dev pmx_telecom_dac;
extern struct pmx_dev pmx_telecom_i2s;
extern struct pmx_dev pmx_telecom_boot_pins;
-extern struct pmx_dev pmx_telecom_sdio_4bit;
-extern struct pmx_dev pmx_telecom_sdio_8bit;
+extern struct pmx_dev pmx_telecom_sdhci_4bit;
+extern struct pmx_dev pmx_telecom_sdhci_8bit;
extern struct pmx_dev pmx_gpio1;
-void spear300_pmx_init(void);
-
/* Add spear300 machine function declarations here */
void __init spear300_init(void);
extern struct pmx_dev pmx_rs485_0_1;
extern struct pmx_dev pmx_tdm0;
-void spear310_pmx_init(void);
-
/* Add spear310 machine function declarations here */
void __init spear310_init(void);
extern struct pmx_dev pmx_emi;
extern struct pmx_dev pmx_fsmc;
extern struct pmx_dev pmx_spp;
-extern struct pmx_dev pmx_sdio;
+extern struct pmx_dev pmx_sdhci;
extern struct pmx_dev pmx_i2s;
extern struct pmx_dev pmx_uart1;
extern struct pmx_dev pmx_uart1_modem;
extern struct pmx_dev pmx_uart2;
extern struct pmx_dev pmx_touchscreen;
extern struct pmx_dev pmx_can;
-extern struct pmx_dev pmx_sdio_led;
+extern struct pmx_dev pmx_sdhci_led;
extern struct pmx_dev pmx_pwm0;
extern struct pmx_dev pmx_pwm1;
extern struct pmx_dev pmx_pwm2;
extern struct pmx_dev pmx_smii1;
extern struct pmx_dev pmx_i2c1;
-void spear320_pmx_init(void);
-
/* Add spear320 machine function declarations here */
void __init spear320_init(void);
#ifndef __MACH_HARDWARE_H
#define __MACH_HARDWARE_H
+#include <plat/hardware.h>
+#include <mach/spear.h>
+
/* Vitual to physical translation of statically mapped space */
#define IO_ADDRESS(x) (x | 0xF0000000)
#define IRQ_CLCD IRQ_GEN_RAS_3
/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */
-#define IRQ_SDIO IRQ_INTRCOMM_RAS_ARM
+#define IRQ_SDHCI IRQ_INTRCOMM_RAS_ARM
/* GPIO pins virtual irqs */
#define SPEAR_GPIO_INT_BASE (VIRQ_START + 9)
#define VIRQ_SPP (VIRQ_START + 2)
/* IRQs sharing IRQ_GEN_RAS_2 */
-#define IRQ_SDIO IRQ_GEN_RAS_2
+#define IRQ_SDHCI IRQ_GEN_RAS_2
/* IRQs sharing IRQ_GEN_RAS_3 */
#define VIRQ_PLGPIO (VIRQ_START + 3)
#ifndef __MACH_MISC_REGS_H
#define __MACH_MISC_REGS_H
-#include <mach/spear.h>
+#include <mach/hardware.h>
-#define MISC_BASE VA_SPEAR3XX_ICM3_MISC_REG_BASE
+#define MISC_BASE IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE)
-#define SOC_CFG_CTR ((unsigned int *)(MISC_BASE + 0x000))
-#define DIAG_CFG_CTR ((unsigned int *)(MISC_BASE + 0x004))
-#define PLL1_CTR ((unsigned int *)(MISC_BASE + 0x008))
-#define PLL1_FRQ ((unsigned int *)(MISC_BASE + 0x00C))
-#define PLL1_MOD ((unsigned int *)(MISC_BASE + 0x010))
-#define PLL2_CTR ((unsigned int *)(MISC_BASE + 0x014))
+#define SOC_CFG_CTR (MISC_BASE + 0x000)
+#define DIAG_CFG_CTR (MISC_BASE + 0x004)
+#define PLL1_CTR (MISC_BASE + 0x008)
+#define PLL1_FRQ (MISC_BASE + 0x00C)
+#define PLL1_MOD (MISC_BASE + 0x010)
+#define PLL2_CTR (MISC_BASE + 0x014)
/* PLL_CTR register masks */
#define PLL_ENABLE 2
#define PLL_MODE_SHIFT 4
#define PLL_MODE_DITH_DSB 2
#define PLL_MODE_DITH_SSB 3
-#define PLL2_FRQ ((unsigned int *)(MISC_BASE + 0x018))
+#define PLL2_FRQ (MISC_BASE + 0x018)
/* PLL FRQ register masks */
#define PLL_DIV_N_SHIFT 0
#define PLL_DIV_N_MASK 0xFF
#define PLL_DITH_FDBK_M_SHIFT 16
#define PLL_DITH_FDBK_M_MASK 0xFFFF
-#define PLL2_MOD ((unsigned int *)(MISC_BASE + 0x01C))
-#define PLL_CLK_CFG ((unsigned int *)(MISC_BASE + 0x020))
-#define CORE_CLK_CFG ((unsigned int *)(MISC_BASE + 0x024))
+#define PLL2_MOD (MISC_BASE + 0x01C)
+#define PLL_CLK_CFG (MISC_BASE + 0x020)
+#define CORE_CLK_CFG (MISC_BASE + 0x024)
/* CORE CLK CFG register masks */
#define PLL_HCLK_RATIO_SHIFT 10
#define PLL_HCLK_RATIO_MASK 0x3
#define HCLK_PCLK_RATIO_SHIFT 8
#define HCLK_PCLK_RATIO_MASK 0x3
-#define PERIP_CLK_CFG ((unsigned int *)(MISC_BASE + 0x028))
+#define PERIP_CLK_CFG (MISC_BASE + 0x028)
/* PERIP_CLK_CFG register masks */
#define UART_CLK_SHIFT 4
#define UART_CLK_MASK 0x1
#define GPT1_CLK_SHIFT 11
#define GPT2_CLK_SHIFT 12
#define GPT_CLK_MASK 0x1
-#define AUX_CLK_PLL3_MASK 0
-#define AUX_CLK_PLL1_MASK 1
+#define AUX_CLK_PLL3_VAL 0
+#define AUX_CLK_PLL1_VAL 1
-#define PERIP1_CLK_ENB ((unsigned int *)(MISC_BASE + 0x02C))
+#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
/* PERIP1_CLK_ENB register masks */
#define UART_CLK_ENB 3
#define SSP_CLK_ENB 5
#define USBH_CLK_ENB 25
#define C3_CLK_ENB 31
-#define SOC_CORE_ID ((unsigned int *)(MISC_BASE + 0x030))
-#define RAS_CLK_ENB ((unsigned int *)(MISC_BASE + 0x034))
-#define PERIP1_SOF_RST ((unsigned int *)(MISC_BASE + 0x038))
+#define SOC_CORE_ID (MISC_BASE + 0x030)
+#define RAS_CLK_ENB (MISC_BASE + 0x034)
+#define PERIP1_SOF_RST (MISC_BASE + 0x038)
/* PERIP1_SOF_RST register masks */
#define JPEG_SOF_RST 8
-#define SOC_USER_ID ((unsigned int *)(MISC_BASE + 0x03C))
-#define RAS_SOF_RST ((unsigned int *)(MISC_BASE + 0x040))
-#define PRSC1_CLK_CFG ((unsigned int *)(MISC_BASE + 0x044))
-#define PRSC2_CLK_CFG ((unsigned int *)(MISC_BASE + 0x048))
-#define PRSC3_CLK_CFG ((unsigned int *)(MISC_BASE + 0x04C))
+#define SOC_USER_ID (MISC_BASE + 0x03C)
+#define RAS_SOF_RST (MISC_BASE + 0x040)
+#define PRSC1_CLK_CFG (MISC_BASE + 0x044)
+#define PRSC2_CLK_CFG (MISC_BASE + 0x048)
+#define PRSC3_CLK_CFG (MISC_BASE + 0x04C)
/* gpt synthesizer register masks */
#define GPT_MSCALE_SHIFT 0
#define GPT_MSCALE_MASK 0xFFF
#define GPT_NSCALE_SHIFT 12
#define GPT_NSCALE_MASK 0xF
-#define AMEM_CLK_CFG ((unsigned int *)(MISC_BASE + 0x050))
-#define EXPI_CLK_CFG ((unsigned int *)(MISC_BASE + 0x054))
-#define CLCD_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x05C))
-#define FIRDA_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x060))
-#define UART_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x064))
-#define GMAC_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x068))
-#define RAS1_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x06C))
-#define RAS2_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x070))
-#define RAS3_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x074))
-#define RAS4_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x078))
+#define AMEM_CLK_CFG (MISC_BASE + 0x050)
+#define EXPI_CLK_CFG (MISC_BASE + 0x054)
+#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
+#define UART_CLK_SYNT (MISC_BASE + 0x064)
+#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
+#define RAS1_CLK_SYNT (MISC_BASE + 0x06C)
+#define RAS2_CLK_SYNT (MISC_BASE + 0x070)
+#define RAS3_CLK_SYNT (MISC_BASE + 0x074)
+#define RAS4_CLK_SYNT (MISC_BASE + 0x078)
/* aux clk synthesiser register masks for irda to ras4 */
+#define AUX_SYNT_ENB 31
#define AUX_EQ_SEL_SHIFT 30
#define AUX_EQ_SEL_MASK 1
#define AUX_EQ1_SEL 0
#define AUX_YSCALE_SHIFT 0
#define AUX_YSCALE_MASK 0xFFF
-#define ICM1_ARB_CFG ((unsigned int *)(MISC_BASE + 0x07C))
-#define ICM2_ARB_CFG ((unsigned int *)(MISC_BASE + 0x080))
-#define ICM3_ARB_CFG ((unsigned int *)(MISC_BASE + 0x084))
-#define ICM4_ARB_CFG ((unsigned int *)(MISC_BASE + 0x088))
-#define ICM5_ARB_CFG ((unsigned int *)(MISC_BASE + 0x08C))
-#define ICM6_ARB_CFG ((unsigned int *)(MISC_BASE + 0x090))
-#define ICM7_ARB_CFG ((unsigned int *)(MISC_BASE + 0x094))
-#define ICM8_ARB_CFG ((unsigned int *)(MISC_BASE + 0x098))
-#define ICM9_ARB_CFG ((unsigned int *)(MISC_BASE + 0x09C))
-#define DMA_CHN_CFG ((unsigned int *)(MISC_BASE + 0x0A0))
-#define USB2_PHY_CFG ((unsigned int *)(MISC_BASE + 0x0A4))
-#define GMAC_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0A8))
-#define EXPI_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0AC))
-#define PRC1_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C0))
-#define PRC2_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C4))
-#define PRC3_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C8))
-#define PRC4_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0CC))
-#define PRC1_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D0))
-#define PRC2_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D4))
-#define PRC3_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D8))
-#define PRC4_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0DC))
-#define PWRDOWN_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0E0))
-#define COMPSSTL_1V8_CFG ((unsigned int *)(MISC_BASE + 0x0E4))
-#define COMPSSTL_2V5_CFG ((unsigned int *)(MISC_BASE + 0x0E8))
-#define COMPCOR_3V3_CFG ((unsigned int *)(MISC_BASE + 0x0EC))
-#define SSTLPAD_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F0))
-#define BIST1_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F4))
-#define BIST2_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F8))
-#define BIST3_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0FC))
-#define BIST4_CFG_CTR ((unsigned int *)(MISC_BASE + 0x100))
-#define BIST5_CFG_CTR ((unsigned int *)(MISC_BASE + 0x104))
-#define BIST1_STS_RES ((unsigned int *)(MISC_BASE + 0x108))
-#define BIST2_STS_RES ((unsigned int *)(MISC_BASE + 0x10C))
-#define BIST3_STS_RES ((unsigned int *)(MISC_BASE + 0x110))
-#define BIST4_STS_RES ((unsigned int *)(MISC_BASE + 0x114))
-#define BIST5_STS_RES ((unsigned int *)(MISC_BASE + 0x118))
-#define SYSERR_CFG_CTR ((unsigned int *)(MISC_BASE + 0x11C))
+#define ICM1_ARB_CFG (MISC_BASE + 0x07C)
+#define ICM2_ARB_CFG (MISC_BASE + 0x080)
+#define ICM3_ARB_CFG (MISC_BASE + 0x084)
+#define ICM4_ARB_CFG (MISC_BASE + 0x088)
+#define ICM5_ARB_CFG (MISC_BASE + 0x08C)
+#define ICM6_ARB_CFG (MISC_BASE + 0x090)
+#define ICM7_ARB_CFG (MISC_BASE + 0x094)
+#define ICM8_ARB_CFG (MISC_BASE + 0x098)
+#define ICM9_ARB_CFG (MISC_BASE + 0x09C)
+#define DMA_CHN_CFG (MISC_BASE + 0x0A0)
+#define USB2_PHY_CFG (MISC_BASE + 0x0A4)
+#define GMAC_CFG_CTR (MISC_BASE + 0x0A8)
+#define EXPI_CFG_CTR (MISC_BASE + 0x0AC)
+#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0)
+#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4)
+#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8)
+#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC)
+#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0)
+#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4)
+#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8)
+#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC)
+#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0)
+#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4)
+#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8)
+#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC)
+#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0)
+#define BIST1_CFG_CTR (MISC_BASE + 0x0F4)
+#define BIST2_CFG_CTR (MISC_BASE + 0x0F8)
+#define BIST3_CFG_CTR (MISC_BASE + 0x0FC)
+#define BIST4_CFG_CTR (MISC_BASE + 0x100)
+#define BIST5_CFG_CTR (MISC_BASE + 0x104)
+#define BIST1_STS_RES (MISC_BASE + 0x108)
+#define BIST2_STS_RES (MISC_BASE + 0x10C)
+#define BIST3_STS_RES (MISC_BASE + 0x110)
+#define BIST4_STS_RES (MISC_BASE + 0x114)
+#define BIST5_STS_RES (MISC_BASE + 0x118)
+#define SYSERR_CFG_CTR (MISC_BASE + 0x11C)
#endif /* __MACH_MISC_REGS_H */
#ifndef __MACH_SPEAR3XX_H
#define __MACH_SPEAR3XX_H
-#include <mach/hardware.h>
+#include <asm/memory.h>
#include <mach/spear300.h>
#include <mach/spear310.h>
#include <mach/spear320.h>
-#define SPEAR3XX_ML_SDRAM_BASE 0x00000000
-#define SPEAR3XX_ML_SDRAM_SIZE 0x40000000
+#define SPEAR3XX_ML_SDRAM_BASE UL(0x00000000)
-#define SPEAR3XX_ICM9_BASE 0xC0000000
-#define SPEAR3XX_ICM9_SIZE 0x10000000
+#define SPEAR3XX_ICM9_BASE UL(0xC0000000)
/* ICM1 - Low speed connection */
-#define SPEAR3XX_ICM1_2_BASE 0xD0000000
-#define SPEAR3XX_ICM1_2_SIZE 0x10000000
-
-#define SPEAR3XX_ICM1_UART_BASE 0xD0000000
+#define SPEAR3XX_ICM1_2_BASE UL(0xD0000000)
+#define SPEAR3XX_ICM1_UART_BASE UL(0xD0000000)
#define VA_SPEAR3XX_ICM1_UART_BASE IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE)
-#define SPEAR3XX_ICM1_UART_SIZE 0x00080000
-
-#define SPEAR3XX_ICM1_ADC_BASE 0xD0080000
-#define SPEAR3XX_ICM1_ADC_SIZE 0x00080000
-
-#define SPEAR3XX_ICM1_SSP_BASE 0xD0100000
-#define SPEAR3XX_ICM1_SSP_SIZE 0x00080000
-
-#define SPEAR3XX_ICM1_I2C_BASE 0xD0180000
-#define SPEAR3XX_ICM1_I2C_SIZE 0x00080000
-
-#define SPEAR3XX_ICM1_JPEG_BASE 0xD0800000
-#define SPEAR3XX_ICM1_JPEG_SIZE 0x00800000
-
-#define SPEAR3XX_ICM1_IRDA_BASE 0xD1000000
-#define SPEAR3XX_ICM1_IRDA_SIZE 0x00080000
-
-#define SPEAR3XX_ICM1_SRAM_BASE 0xD2800000
-#define SPEAR3XX_ICM1_SRAM_SIZE 0x05800000
+#define SPEAR3XX_ICM1_ADC_BASE UL(0xD0080000)
+#define SPEAR3XX_ICM1_SSP_BASE UL(0xD0100000)
+#define SPEAR3XX_ICM1_I2C_BASE UL(0xD0180000)
+#define SPEAR3XX_ICM1_JPEG_BASE UL(0xD0800000)
+#define SPEAR3XX_ICM1_IRDA_BASE UL(0xD1000000)
+#define SPEAR3XX_ICM1_SRAM_BASE UL(0xD2800000)
/* ICM2 - Application Subsystem */
-#define SPEAR3XX_ICM2_HWACCEL0_BASE 0xD8800000
-#define SPEAR3XX_ICM2_HWACCEL0_SIZE 0x00800000
-
-#define SPEAR3XX_ICM2_HWACCEL1_BASE 0xD9000000
-#define SPEAR3XX_ICM2_HWACCEL1_SIZE 0x00800000
+#define SPEAR3XX_ICM2_HWACCEL0_BASE UL(0xD8800000)
+#define SPEAR3XX_ICM2_HWACCEL1_BASE UL(0xD9000000)
/* ICM4 - High Speed Connection */
-#define SPEAR3XX_ICM4_BASE 0xE0000000
-#define SPEAR3XX_ICM4_SIZE 0x08000000
-
-#define SPEAR3XX_ICM4_MII_BASE 0xE0800000
-#define SPEAR3XX_ICM4_MII_SIZE 0x00800000
-
-#define SPEAR3XX_ICM4_USBD_FIFO_BASE 0xE1000000
-#define SPEAR3XX_ICM4_USBD_FIFO_SIZE 0x00100000
-
-#define SPEAR3XX_ICM4_USBD_CSR_BASE 0xE1100000
-#define SPEAR3XX_ICM4_USBD_CSR_SIZE 0x00100000
-
-#define SPEAR3XX_ICM4_USBD_PLDT_BASE 0xE1200000
-#define SPEAR3XX_ICM4_USBD_PLDT_SIZE 0x00100000
-
-#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE 0xE1800000
-#define SPEAR3XX_ICM4_USB_EHCI0_1_SIZE 0x00100000
-
-#define SPEAR3XX_ICM4_USB_OHCI0_BASE 0xE1900000
-#define SPEAR3XX_ICM4_USB_OHCI0_SIZE 0x00100000
-
-#define SPEAR3XX_ICM4_USB_OHCI1_BASE 0xE2100000
-#define SPEAR3XX_ICM4_USB_OHCI1_SIZE 0x00100000
-
-#define SPEAR3XX_ICM4_USB_ARB_BASE 0xE2800000
-#define SPEAR3XX_ICM4_USB_ARB_SIZE 0x00010000
+#define SPEAR3XX_ICM4_BASE UL(0xE0000000)
+#define SPEAR3XX_ICM4_MII_BASE UL(0xE0800000)
+#define SPEAR3XX_ICM4_USBD_FIFO_BASE UL(0xE1000000)
+#define SPEAR3XX_ICM4_USBD_CSR_BASE UL(0xE1100000)
+#define SPEAR3XX_ICM4_USBD_PLDT_BASE UL(0xE1200000)
+#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE UL(0xE1800000)
+#define SPEAR3XX_ICM4_USB_OHCI0_BASE UL(0xE1900000)
+#define SPEAR3XX_ICM4_USB_OHCI1_BASE UL(0xE2100000)
+#define SPEAR3XX_ICM4_USB_ARB_BASE UL(0xE2800000)
/* ML1 - Multi Layer CPU Subsystem */
-#define SPEAR3XX_ICM3_ML1_2_BASE 0xF0000000
-#define SPEAR3XX_ICM3_ML1_2_SIZE 0x0F000000
-
-#define SPEAR3XX_ML1_TMR_BASE 0xF0000000
-#define SPEAR3XX_ML1_TMR_SIZE 0x00100000
-
-#define SPEAR3XX_ML1_VIC_BASE 0xF1100000
+#define SPEAR3XX_ICM3_ML1_2_BASE UL(0xF0000000)
+#define SPEAR3XX_ML1_TMR_BASE UL(0xF0000000)
+#define SPEAR3XX_ML1_VIC_BASE UL(0xF1100000)
#define VA_SPEAR3XX_ML1_VIC_BASE IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE)
-#define SPEAR3XX_ML1_VIC_SIZE 0x00100000
/* ICM3 - Basic Subsystem */
-#define SPEAR3XX_ICM3_SMEM_BASE 0xF8000000
-#define SPEAR3XX_ICM3_SMEM_SIZE 0x04000000
-
-#define SPEAR3XX_ICM3_SMI_CTRL_BASE 0xFC000000
-#define SPEAR3XX_ICM3_SMI_CTRL_SIZE 0x00200000
-
-#define SPEAR3XX_ICM3_DMA_BASE 0xFC400000
-#define SPEAR3XX_ICM3_DMA_SIZE 0x00200000
-
-#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE 0xFC600000
-#define SPEAR3XX_ICM3_SDRAM_CTRL_SIZE 0x00200000
-
-#define SPEAR3XX_ICM3_TMR0_BASE 0xFC800000
-#define SPEAR3XX_ICM3_TMR0_SIZE 0x00080000
-
-#define SPEAR3XX_ICM3_WDT_BASE 0xFC880000
-#define SPEAR3XX_ICM3_WDT_SIZE 0x00080000
-
-#define SPEAR3XX_ICM3_RTC_BASE 0xFC900000
-#define SPEAR3XX_ICM3_RTC_SIZE 0x00080000
-
-#define SPEAR3XX_ICM3_GPIO_BASE 0xFC980000
-#define SPEAR3XX_ICM3_GPIO_SIZE 0x00080000
-
-#define SPEAR3XX_ICM3_SYS_CTRL_BASE 0xFCA00000
+#define SPEAR3XX_ICM3_SMEM_BASE UL(0xF8000000)
+#define SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
+#define SPEAR3XX_ICM3_DMA_BASE UL(0xFC400000)
+#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000)
+#define SPEAR3XX_ICM3_TMR0_BASE UL(0xFC800000)
+#define SPEAR3XX_ICM3_WDT_BASE UL(0xFC880000)
+#define SPEAR3XX_ICM3_RTC_BASE UL(0xFC900000)
+#define SPEAR3XX_ICM3_GPIO_BASE UL(0xFC980000)
+#define SPEAR3XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000)
#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE)
-#define SPEAR3XX_ICM3_SYS_CTRL_SIZE 0x00080000
-
-#define SPEAR3XX_ICM3_MISC_REG_BASE 0xFCA80000
+#define SPEAR3XX_ICM3_MISC_REG_BASE UL(0xFCA80000)
#define VA_SPEAR3XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE)
-#define SPEAR3XX_ICM3_MISC_REG_SIZE 0x00080000
-
-#define SPEAR3XX_ICM3_TMR1_BASE 0xFCB00000
-#define SPEAR3XX_ICM3_TMR1_SIZE 0x00080000
+#define SPEAR3XX_ICM3_TMR1_BASE UL(0xFCB00000)
/* Debug uart for linux, will be used for debug and uncompress messages */
#define SPEAR_DBG_UART_BASE SPEAR3XX_ICM1_UART_BASE
#define __MACH_SPEAR300_H
/* Base address of various IPs */
-#define SPEAR300_TELECOM_BASE 0x50000000
-#define SPEAR300_TELECOM_SIZE 0x10000000
+#define SPEAR300_TELECOM_BASE UL(0x50000000)
/* Interrupt registers offsets and masks */
-#define SPEAR300_TELECOM_REG_SIZE 0x00010000
#define INT_ENB_MASK_REG 0x54
#define INT_STS_MASK_REG 0x58
#define IT_PERS_S_IRQ_MASK (1 << 0)
#define SHIRQ_RAS1_MASK 0x1FF
-#define SPEAR300_CLCD_BASE 0x60000000
-#define SPEAR300_CLCD_SIZE 0x10000000
-
-#define SPEAR300_SDIO_BASE 0x70000000
-#define SPEAR300_SDIO_SIZE 0x10000000
-
-#define SPEAR300_NAND_0_BASE 0x80000000
-#define SPEAR300_NAND_0_SIZE 0x04000000
-
-#define SPEAR300_NAND_1_BASE 0x84000000
-#define SPEAR300_NAND_1_SIZE 0x04000000
-
-#define SPEAR300_NAND_2_BASE 0x88000000
-#define SPEAR300_NAND_2_SIZE 0x04000000
-
-#define SPEAR300_NAND_3_BASE 0x8c000000
-#define SPEAR300_NAND_3_SIZE 0x04000000
-
-#define SPEAR300_NOR_0_BASE 0x90000000
-#define SPEAR300_NOR_0_SIZE 0x01000000
-
-#define SPEAR300_NOR_1_BASE 0x91000000
-#define SPEAR300_NOR_1_SIZE 0x01000000
-
-#define SPEAR300_NOR_2_BASE 0x92000000
-#define SPEAR300_NOR_2_SIZE 0x01000000
-
-#define SPEAR300_NOR_3_BASE 0x93000000
-#define SPEAR300_NOR_3_SIZE 0x01000000
-
-#define SPEAR300_FSMC_BASE 0x94000000
-#define SPEAR300_FSMC_SIZE 0x05000000
-
-#define SPEAR300_SOC_CONFIG_BASE 0x99000000
-#define SPEAR300_SOC_CONFIG_SIZE 0x00000008
-
-#define SPEAR300_KEYBOARD_BASE 0xA0000000
-#define SPEAR300_KEYBOARD_SIZE 0x09000000
-
-#define SPEAR300_GPIO_BASE 0xA9000000
-#define SPEAR300_GPIO_SIZE 0x07000000
+#define SPEAR300_CLCD_BASE UL(0x60000000)
+#define SPEAR300_SDHCI_BASE UL(0x70000000)
+#define SPEAR300_NAND_0_BASE UL(0x80000000)
+#define SPEAR300_NAND_1_BASE UL(0x84000000)
+#define SPEAR300_NAND_2_BASE UL(0x88000000)
+#define SPEAR300_NAND_3_BASE UL(0x8c000000)
+#define SPEAR300_NOR_0_BASE UL(0x90000000)
+#define SPEAR300_NOR_1_BASE UL(0x91000000)
+#define SPEAR300_NOR_2_BASE UL(0x92000000)
+#define SPEAR300_NOR_3_BASE UL(0x93000000)
+#define SPEAR300_FSMC_BASE UL(0x94000000)
+#define SPEAR300_SOC_CONFIG_BASE UL(0x99000000)
+#define SPEAR300_KEYBOARD_BASE UL(0xA0000000)
+#define SPEAR300_GPIO_BASE UL(0xA9000000)
#endif /* __MACH_SPEAR300_H */
#ifndef __MACH_SPEAR310_H
#define __MACH_SPEAR310_H
-#define SPEAR310_NAND_BASE 0x40000000
-#define SPEAR310_NAND_SIZE 0x04000000
+#define SPEAR310_NAND_BASE UL(0x40000000)
+#define SPEAR310_FSMC_BASE UL(0x44000000)
+#define SPEAR310_UART1_BASE UL(0xB2000000)
+#define SPEAR310_UART2_BASE UL(0xB2080000)
+#define SPEAR310_UART3_BASE UL(0xB2100000)
+#define SPEAR310_UART4_BASE UL(0xB2180000)
+#define SPEAR310_UART5_BASE UL(0xB2200000)
+#define SPEAR310_HDLC_BASE UL(0xB2800000)
+#define SPEAR310_RS485_0_BASE UL(0xB3000000)
+#define SPEAR310_RS485_1_BASE UL(0xB3800000)
+#define SPEAR310_SOC_CONFIG_BASE UL(0xB4000000)
-#define SPEAR310_FSMC_BASE 0x44000000
-#define SPEAR310_FSMC_SIZE 0x01000000
-
-#define SPEAR310_UART1_BASE 0xB2000000
-#define SPEAR310_UART2_BASE 0xB2080000
-#define SPEAR310_UART3_BASE 0xB2100000
-#define SPEAR310_UART4_BASE 0xB2180000
-#define SPEAR310_UART5_BASE 0xB2200000
-#define SPEAR310_UART_SIZE 0x00080000
-
-#define SPEAR310_HDLC_BASE 0xB2800000
-#define SPEAR310_HDLC_SIZE 0x00800000
-
-#define SPEAR310_RS485_0_BASE 0xB3000000
-#define SPEAR310_RS485_0_SIZE 0x00800000
-
-#define SPEAR310_RS485_1_BASE 0xB3800000
-#define SPEAR310_RS485_1_SIZE 0x00800000
-
-#define SPEAR310_SOC_CONFIG_BASE 0xB4000000
-#define SPEAR310_SOC_CONFIG_SIZE 0x00000070
/* Interrupt registers offsets and masks */
#define INT_STS_MASK_REG 0x04
#define SMII0_IRQ_MASK (1 << 0)
#ifndef __MACH_SPEAR320_H
#define __MACH_SPEAR320_H
-#define SPEAR320_EMI_CTRL_BASE 0x40000000
-#define SPEAR320_EMI_CTRL_SIZE 0x08000000
+#define SPEAR320_EMI_CTRL_BASE UL(0x40000000)
+#define SPEAR320_FSMC_BASE UL(0x4C000000)
+#define SPEAR320_NAND_BASE UL(0x50000000)
+#define SPEAR320_I2S_BASE UL(0x60000000)
+#define SPEAR320_SDHCI_BASE UL(0x70000000)
+#define SPEAR320_CLCD_BASE UL(0x90000000)
+#define SPEAR320_PAR_PORT_BASE UL(0xA0000000)
+#define SPEAR320_CAN0_BASE UL(0xA1000000)
+#define SPEAR320_CAN1_BASE UL(0xA2000000)
+#define SPEAR320_UART1_BASE UL(0xA3000000)
+#define SPEAR320_UART2_BASE UL(0xA4000000)
+#define SPEAR320_SSP0_BASE UL(0xA5000000)
+#define SPEAR320_SSP1_BASE UL(0xA6000000)
+#define SPEAR320_I2C_BASE UL(0xA7000000)
+#define SPEAR320_PWM_BASE UL(0xA8000000)
+#define SPEAR320_SMII0_BASE UL(0xAA000000)
+#define SPEAR320_SMII1_BASE UL(0xAB000000)
+#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000)
-#define SPEAR320_FSMC_BASE 0x4C000000
-#define SPEAR320_FSMC_SIZE 0x01000000
-
-#define SPEAR320_I2S_BASE 0x60000000
-#define SPEAR320_I2S_SIZE 0x10000000
-
-#define SPEAR320_SDIO_BASE 0x70000000
-#define SPEAR320_SDIO_SIZE 0x10000000
-
-#define SPEAR320_CLCD_BASE 0x90000000
-#define SPEAR320_CLCD_SIZE 0x10000000
-
-#define SPEAR320_PAR_PORT_BASE 0xA0000000
-#define SPEAR320_PAR_PORT_SIZE 0x01000000
-
-#define SPEAR320_CAN0_BASE 0xA1000000
-#define SPEAR320_CAN0_SIZE 0x01000000
-
-#define SPEAR320_CAN1_BASE 0xA2000000
-#define SPEAR320_CAN1_SIZE 0x01000000
-
-#define SPEAR320_UART1_BASE 0xA3000000
-#define SPEAR320_UART2_BASE 0xA4000000
-#define SPEAR320_UART_SIZE 0x01000000
-
-#define SPEAR320_SSP0_BASE 0xA5000000
-#define SPEAR320_SSP0_SIZE 0x01000000
-
-#define SPEAR320_SSP1_BASE 0xA6000000
-#define SPEAR320_SSP1_SIZE 0x01000000
-
-#define SPEAR320_I2C_BASE 0xA7000000
-#define SPEAR320_I2C_SIZE 0x01000000
-
-#define SPEAR320_PWM_BASE 0xA8000000
-#define SPEAR320_PWM_SIZE 0x01000000
-
-#define SPEAR320_SMII0_BASE 0xAA000000
-#define SPEAR320_SMII0_SIZE 0x01000000
-
-#define SPEAR320_SMII1_BASE 0xAB000000
-#define SPEAR320_SMII1_SIZE 0x01000000
-
-#define SPEAR320_SOC_CONFIG_BASE 0xB3000000
-#define SPEAR320_SOC_CONFIG_SIZE 0x00000070
/* Interrupt registers offsets and masks */
#define INT_STS_MASK_REG 0x04
#define INT_CLR_MASK_REG 0x04
#define EMI_IRQ_MASK (1 << 7)
#define CLCD_IRQ_MASK (1 << 8)
#define SPP_IRQ_MASK (1 << 9)
-#define SDIO_IRQ_MASK (1 << 10)
+#define SDHCI_IRQ_MASK (1 << 10)
#define CAN_U_IRQ_MASK (1 << 11)
#define CAN_L_IRQ_MASK (1 << 12)
#define UART1_IRQ_MASK (1 << 13)
#include <linux/amba/pl061.h>
#include <linux/ptrace.h>
#include <asm/irq.h>
-#include <mach/generic.h>
-#include <mach/spear.h>
#include <plat/shirq.h>
+#include <mach/generic.h>
+#include <mach/hardware.h>
/* pad multiplexing support */
/* muxing registers */
.enb_on_reset = 1,
};
-struct pmx_dev_mode pmx_telecom_sdio_4bit_modes[] = {
+struct pmx_dev_mode pmx_telecom_sdhci_4bit_modes[] = {
{
.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
},
};
-struct pmx_dev pmx_telecom_sdio_4bit = {
- .name = "telecom_sdio_4bit",
- .modes = pmx_telecom_sdio_4bit_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_sdio_4bit_modes),
+struct pmx_dev pmx_telecom_sdhci_4bit = {
+ .name = "telecom_sdhci_4bit",
+ .modes = pmx_telecom_sdhci_4bit_modes,
+ .mode_count = ARRAY_SIZE(pmx_telecom_sdhci_4bit_modes),
.enb_on_reset = 1,
};
-struct pmx_dev_mode pmx_telecom_sdio_8bit_modes[] = {
+struct pmx_dev_mode pmx_telecom_sdhci_8bit_modes[] = {
{
.ids = PHOTO_FRAME_MODE | LEND_IP_PHONE_MODE |
HEND_IP_PHONE_MODE | LEND_WIFI_PHONE_MODE |
},
};
-struct pmx_dev pmx_telecom_sdio_8bit = {
- .name = "telecom_sdio_8bit",
- .modes = pmx_telecom_sdio_8bit_modes,
- .mode_count = ARRAY_SIZE(pmx_telecom_sdio_8bit_modes),
+struct pmx_dev pmx_telecom_sdhci_8bit = {
+ .name = "telecom_sdhci_8bit",
+ .modes = pmx_telecom_sdhci_8bit_modes,
+ .mode_count = ARRAY_SIZE(pmx_telecom_sdhci_8bit_modes),
.enb_on_reset = 1,
};
.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
};
-/* Add spear300 specific devices here */
-/* arm gpio1 device registration */
-static struct pl061_platform_data gpio1_plat_data = {
- .gpio_base = 8,
- .irq_base = SPEAR_GPIO1_INT_BASE,
-};
-
-struct amba_device gpio1_device = {
- .dev = {
- .init_name = "gpio1",
- .platform_data = &gpio1_plat_data,
- },
- .res = {
- .start = SPEAR300_GPIO_BASE,
- .end = SPEAR300_GPIO_BASE + SPEAR300_GPIO_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {VIRQ_GPIO1, NO_IRQ},
-};
-
/* spear3xx shared irq */
struct shirq_dev_config shirq_ras1_config[] = {
{
},
};
+/* Add spear300 specific devices here */
+/* arm gpio1 device registration */
+static struct pl061_platform_data gpio1_plat_data = {
+ .gpio_base = 8,
+ .irq_base = SPEAR_GPIO1_INT_BASE,
+};
+
+struct amba_device gpio1_device = {
+ .dev = {
+ .init_name = "gpio1",
+ .platform_data = &gpio1_plat_data,
+ },
+ .res = {
+ .start = SPEAR300_GPIO_BASE,
+ .end = SPEAR300_GPIO_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {VIRQ_GPIO1, NO_IRQ},
+};
+
/* spear300 routines */
void __init spear300_init(void)
{
spear3xx_init();
/* shared irq registration */
- shirq_ras1.regs.base =
- ioremap(SPEAR300_TELECOM_BASE, SPEAR300_TELECOM_REG_SIZE);
+ shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K);
if (shirq_ras1.regs.base) {
ret = spear_shirq_register(&shirq_ras1);
if (ret)
printk(KERN_ERR "Error registering Shared IRQ\n");
}
-}
-void spear300_pmx_init(void)
-{
- spear_pmx_init(&pmx_driver, SPEAR300_SOC_CONFIG_BASE,
- SPEAR300_SOC_CONFIG_SIZE);
+ /* pmx initialization */
+ pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K);
+ if (pmx_driver.base) {
+ ret = pmx_register(&pmx_driver);
+ if (ret)
+ printk(KERN_ERR "padmux: registeration failed. err no"
+ ": %d\n", ret);
+ /* Free Mapping, device selection already done */
+ iounmap(pmx_driver.base);
+ }
}
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* padmux devices to enable */
static struct pmx_dev *pmx_devs[] = {
/* spear300 specific devices */
&pmx_fsmc_2_chips,
&pmx_clcd,
- &pmx_telecom_sdio_4bit,
+ &pmx_telecom_sdhci_4bit,
&pmx_gpio1,
};
{
unsigned int i;
- /* call spear300 machine init function */
- spear300_init();
-
- /* padmux initialization */
+ /* padmux initialization, must be done before spear300_init */
pmx_driver.mode = &photo_frame_mode;
pmx_driver.devs = pmx_devs;
pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
- spear300_pmx_init();
+
+ /* call spear300 machine init function */
+ spear300_init();
/* Add Platform Devices */
platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
.boot_params = 0x00000100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
- .timer = &spear_sys_timer,
+ .timer = &spear3xx_timer,
.init_machine = spear300_evb_init,
MACHINE_END
#include <linux/ptrace.h>
#include <asm/irq.h>
-#include <mach/generic.h>
-#include <mach/spear.h>
#include <plat/shirq.h>
+#include <mach/generic.h>
+#include <mach/hardware.h>
/* pad multiplexing support */
/* muxing registers */
.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
};
-/* Add spear310 specific devices here */
-
/* spear3xx shared irq */
struct shirq_dev_config shirq_ras1_config[] = {
{
},
};
+/* Add spear310 specific devices here */
+
/* spear310 routines */
void __init spear310_init(void)
{
spear3xx_init();
/* shared irq registration */
- base = ioremap(SPEAR310_SOC_CONFIG_BASE, SPEAR310_SOC_CONFIG_SIZE);
+ base = ioremap(SPEAR310_SOC_CONFIG_BASE, SZ_4K);
if (base) {
/* shirq 1 */
shirq_ras1.regs.base = base;
if (ret)
printk(KERN_ERR "Error registering Shared IRQ 4\n");
}
-}
-void spear310_pmx_init(void)
-{
- spear_pmx_init(&pmx_driver, SPEAR310_SOC_CONFIG_BASE,
- SPEAR310_SOC_CONFIG_SIZE);
+ /* pmx initialization */
+ pmx_driver.base = base;
+ ret = pmx_register(&pmx_driver);
+ if (ret)
+ printk(KERN_ERR "padmux: registeration failed. err no: %d\n",
+ ret);
}
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* padmux devices to enable */
static struct pmx_dev *pmx_devs[] = {
{
unsigned int i;
- /* call spear310 machine init function */
- spear310_init();
-
- /* padmux initialization */
+ /* padmux initialization, must be done before spear310_init */
pmx_driver.mode = NULL;
pmx_driver.devs = pmx_devs;
pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
- spear310_pmx_init();
+
+ /* call spear310 machine init function */
+ spear310_init();
/* Add Platform Devices */
platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
.boot_params = 0x00000100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
- .timer = &spear_sys_timer,
+ .timer = &spear3xx_timer,
.init_machine = spear310_evb_init,
MACHINE_END
#include <linux/ptrace.h>
#include <asm/irq.h>
-#include <mach/generic.h>
-#include <mach/spear.h>
#include <plat/shirq.h>
+#include <mach/generic.h>
+#include <mach/hardware.h>
/* pad multiplexing support */
/* muxing registers */
.enb_on_reset = 1,
};
-struct pmx_dev_mode pmx_sdio_modes[] = {
+struct pmx_dev_mode pmx_sdhci_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE |
SMALL_PRINTERS_MODE,
},
};
-struct pmx_dev pmx_sdio = {
- .name = "sdio",
- .modes = pmx_sdio_modes,
- .mode_count = ARRAY_SIZE(pmx_sdio_modes),
+struct pmx_dev pmx_sdhci = {
+ .name = "sdhci",
+ .modes = pmx_sdhci_modes,
+ .mode_count = ARRAY_SIZE(pmx_sdhci_modes),
.enb_on_reset = 1,
};
.enb_on_reset = 1,
};
-struct pmx_dev_mode pmx_sdio_led_modes[] = {
+struct pmx_dev_mode pmx_sdhci_led_modes[] = {
{
.ids = AUTO_NET_SMII_MODE | AUTO_NET_MII_MODE,
.mask = PMX_SSP_CS_MASK,
},
};
-struct pmx_dev pmx_sdio_led = {
- .name = "sdio_led",
- .modes = pmx_sdio_led_modes,
- .mode_count = ARRAY_SIZE(pmx_sdio_led_modes),
+struct pmx_dev pmx_sdhci_led = {
+ .name = "sdhci_led",
+ .modes = pmx_sdhci_led_modes,
+ .mode_count = ARRAY_SIZE(pmx_sdhci_led_modes),
.enb_on_reset = 1,
};
.mux_reg = {.offset = PAD_MUX_CONFIG_REG, .mask = 0x00007fff},
};
-/* Add spear320 specific devices here */
-
/* spear3xx shared irq */
struct shirq_dev_config shirq_ras1_config[] = {
{
},
};
+/* Add spear320 specific devices here */
+
/* spear320 routines */
void __init spear320_init(void)
{
spear3xx_init();
/* shared irq registration */
- base = ioremap(SPEAR320_SOC_CONFIG_BASE, SPEAR320_SOC_CONFIG_SIZE);
+ base = ioremap(SPEAR320_SOC_CONFIG_BASE, SZ_4K);
if (base) {
/* shirq 1 */
shirq_ras1.regs.base = base;
if (ret)
printk(KERN_ERR "Error registering Shared IRQ 4\n");
}
-}
-void spear320_pmx_init(void)
-{
- spear_pmx_init(&pmx_driver, SPEAR320_SOC_CONFIG_BASE,
- SPEAR320_SOC_CONFIG_SIZE);
+ /* pmx initialization */
+ pmx_driver.base = base;
+ ret = pmx_register(&pmx_driver);
+ if (ret)
+ printk(KERN_ERR "padmux: registeration failed. err no: %d\n",
+ ret);
}
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* padmux devices to enable */
static struct pmx_dev *pmx_devs[] = {
/* spear320 specific devices */
&pmx_fsmc,
- &pmx_sdio,
+ &pmx_sdhci,
&pmx_i2s,
&pmx_uart1,
&pmx_uart2,
{
unsigned int i;
- /* call spear320 machine init function */
- spear320_init();
-
- /* padmux initialization */
+ /* padmux initialization, must be done before spear320_init */
pmx_driver.mode = &auto_net_mii_mode;
pmx_driver.devs = pmx_devs;
pmx_driver.devs_count = ARRAY_SIZE(pmx_devs);
- spear320_pmx_init();
+
+ /* call spear320 machine init function */
+ spear320_init();
/* Add Platform Devices */
platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
.boot_params = 0x00000100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
- .timer = &spear_sys_timer,
+ .timer = &spear3xx_timer,
.init_machine = spear320_evb_init,
MACHINE_END
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* Add spear3xx machines common devices here */
/* gpio device registration */
},
.res = {
.start = SPEAR3XX_ICM3_GPIO_BASE,
- .end = SPEAR3XX_ICM3_GPIO_BASE + SPEAR3XX_ICM3_GPIO_SIZE - 1,
+ .end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_BASIC_GPIO, NO_IRQ},
},
.res = {
.start = SPEAR3XX_ICM1_UART_BASE,
- .end = SPEAR3XX_ICM1_UART_BASE + SPEAR3XX_ICM1_UART_SIZE - 1,
+ .end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_UART, NO_IRQ},
{
.virtual = VA_SPEAR3XX_ICM1_UART_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE),
- .length = SPEAR3XX_ICM1_UART_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR3XX_ML1_VIC_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE),
- .length = SPEAR3XX_ML1_VIC_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR3XX_ICM3_SYS_CTRL_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE),
- .length = SPEAR3XX_ICM3_SYS_CTRL_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR3XX_ICM3_MISC_REG_BASE,
.pfn = __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE),
- .length = SPEAR3XX_ICM3_MISC_REG_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
},
};
.mode_count = ARRAY_SIZE(pmx_plgpio_45_46_49_50_modes),
.enb_on_reset = 1,
};
+#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
-#endif
-
-/* spear padmux initialization function */
-void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size)
+static void __init spear3xx_timer_init(void)
{
- int ret = 0;
+ char pclk_name[] = "pll3_48m_clk";
+ struct clk *gpt_clk, *pclk;
+
+ /* get the system timer clock */
+ gpt_clk = clk_get_sys("gpt0", NULL);
+ if (IS_ERR(gpt_clk)) {
+ pr_err("%s:couldn't get clk for gpt\n", __func__);
+ BUG();
+ }
- /* pad mux initialization */
- pmx_driver->base = ioremap(base, size);
- if (!pmx_driver->base) {
- ret = -ENOMEM;
- goto pmx_fail;
+ /* get the suitable parent clock for timer*/
+ pclk = clk_get(NULL, pclk_name);
+ if (IS_ERR(pclk)) {
+ pr_err("%s:couldn't get %s as parent for gpt\n",
+ __func__, pclk_name);
+ BUG();
}
- ret = pmx_register(pmx_driver);
- iounmap(pmx_driver->base);
+ clk_set_parent(gpt_clk, pclk);
+ clk_put(gpt_clk);
+ clk_put(pclk);
-pmx_fail:
- if (ret)
- printk(KERN_ERR "padmux: registration failed. err no: %d\n",
- ret);
+ spear_setup_timer();
}
+
+struct sys_timer spear3xx_timer = {
+ .init = spear3xx_timer_init,
+};
#include <linux/init.h>
#include <linux/kernel.h>
-#include <mach/misc_regs.h>
#include <plat/clock.h>
+#include <mach/misc_regs.h>
/* root clks */
/* 32 KHz oscillator clock */
};
/* clock derived from 30 MHz osc clk */
+/* pll masks structure */
+static struct pll_clk_masks pll1_masks = {
+ .mode_mask = PLL_MODE_MASK,
+ .mode_shift = PLL_MODE_SHIFT,
+ .norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
+ .norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
+ .dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
+ .dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
+ .div_p_mask = PLL_DIV_P_MASK,
+ .div_p_shift = PLL_DIV_P_SHIFT,
+ .div_n_mask = PLL_DIV_N_MASK,
+ .div_n_shift = PLL_DIV_N_SHIFT,
+};
+
/* pll1 configuration structure */
static struct pll_clk_config pll1_config = {
.mode_reg = PLL1_CTR,
.cfg_reg = PLL1_FRQ,
+ .masks = &pll1_masks,
+};
+
+/* pll rate configuration table, in ascending order of rates */
+struct pll_rate_tbl pll_rtbl[] = {
+ {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
+ {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
};
/* PLL1 clock */
static struct clk pll1_clk = {
+ .flags = ENABLED_ON_INIT,
.pclk = &osc_30m_clk,
.en_reg = PLL1_CTR,
.en_reg_bit = PLL_ENABLE,
- .recalc = &pll1_clk_recalc,
+ .calc_rate = &pll_calc_rate,
+ .recalc = &pll_clk_recalc,
+ .set_rate = &pll_clk_set_rate,
+ .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
.private_data = &pll1_config,
};
.recalc = &follow_parent,
};
+/* ahb masks structure */
+static struct bus_clk_masks ahb_masks = {
+ .mask = PLL_HCLK_RATIO_MASK,
+ .shift = PLL_HCLK_RATIO_SHIFT,
+};
+
/* ahb configuration structure */
static struct bus_clk_config ahb_config = {
.reg = CORE_CLK_CFG,
- .mask = PLL_HCLK_RATIO_MASK,
- .shift = PLL_HCLK_RATIO_SHIFT,
+ .masks = &ahb_masks,
+};
+
+/* ahb rate configuration table, in ascending order of rates */
+struct bus_rate_tbl bus_rtbl[] = {
+ {.div = 3}, /* == parent divided by 4 */
+ {.div = 2}, /* == parent divided by 3 */
+ {.div = 1}, /* == parent divided by 2 */
+ {.div = 0}, /* == parent divided by 1 */
};
/* ahb clock */
static struct clk ahb_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll1_clk,
+ .calc_rate = &bus_calc_rate,
.recalc = &bus_clk_recalc,
+ .set_rate = &bus_clk_set_rate,
+ .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
.private_data = &ahb_config,
};
+/* auxiliary synthesizers masks */
+static struct aux_clk_masks aux_masks = {
+ .eq_sel_mask = AUX_EQ_SEL_MASK,
+ .eq_sel_shift = AUX_EQ_SEL_SHIFT,
+ .eq1_mask = AUX_EQ1_SEL,
+ .eq2_mask = AUX_EQ2_SEL,
+ .xscale_sel_mask = AUX_XSCALE_MASK,
+ .xscale_sel_shift = AUX_XSCALE_SHIFT,
+ .yscale_sel_mask = AUX_YSCALE_MASK,
+ .yscale_sel_shift = AUX_YSCALE_SHIFT,
+};
+
+/* uart configurations */
+static struct aux_clk_config uart_synth_config = {
+ .synth_reg = UART_CLK_SYNT,
+ .masks = &aux_masks,
+};
+
+/* aux rate configuration table, in ascending order of rates */
+struct aux_rate_tbl aux_rtbl[] = {
+ /* For PLL1 = 332 MHz */
+ {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
+ {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
+ {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
+};
+
+/* uart synth clock */
+static struct clk uart_synth_clk = {
+ .en_reg = UART_CLK_SYNT,
+ .en_reg_bit = AUX_SYNT_ENB,
+ .pclk = &pll1_clk,
+ .calc_rate = &aux_calc_rate,
+ .recalc = &aux_clk_recalc,
+ .set_rate = &aux_clk_set_rate,
+ .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
+ .private_data = &uart_synth_config,
+};
+
/* uart parents */
static struct pclk_info uart_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &uart_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
.pclk_sel_mask = UART_CLK_MASK,
};
-/* uart configurations */
-static struct aux_clk_config uart_config = {
- .synth_reg = UART_CLK_SYNT,
-};
-
/* uart0 clock */
static struct clk uart0_clk = {
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = UART0_CLK_ENB,
.pclk_sel = &uart_pclk_sel,
.pclk_sel_shift = UART_CLK_SHIFT,
- .recalc = &aux_clk_recalc,
- .private_data = &uart_config,
+ .recalc = &follow_parent,
};
/* uart1 clock */
.en_reg_bit = UART1_CLK_ENB,
.pclk_sel = &uart_pclk_sel,
.pclk_sel_shift = UART_CLK_SHIFT,
- .recalc = &aux_clk_recalc,
- .private_data = &uart_config,
+ .recalc = &follow_parent,
};
/* firda configurations */
-static struct aux_clk_config firda_config = {
+static struct aux_clk_config firda_synth_config = {
.synth_reg = FIRDA_CLK_SYNT,
+ .masks = &aux_masks,
+};
+
+/* firda synth clock */
+static struct clk firda_synth_clk = {
+ .en_reg = FIRDA_CLK_SYNT,
+ .en_reg_bit = AUX_SYNT_ENB,
+ .pclk = &pll1_clk,
+ .calc_rate = &aux_calc_rate,
+ .recalc = &aux_clk_recalc,
+ .set_rate = &aux_clk_set_rate,
+ .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
+ .private_data = &firda_synth_config,
};
/* firda parents */
static struct pclk_info firda_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &firda_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
.en_reg_bit = FIRDA_CLK_ENB,
.pclk_sel = &firda_pclk_sel,
.pclk_sel_shift = FIRDA_CLK_SHIFT,
- .recalc = &aux_clk_recalc,
- .private_data = &firda_config,
+ .recalc = &follow_parent,
};
/* clcd configurations */
-static struct aux_clk_config clcd_config = {
+static struct aux_clk_config clcd_synth_config = {
.synth_reg = CLCD_CLK_SYNT,
+ .masks = &aux_masks,
+};
+
+/* firda synth clock */
+static struct clk clcd_synth_clk = {
+ .en_reg = CLCD_CLK_SYNT,
+ .en_reg_bit = AUX_SYNT_ENB,
+ .pclk = &pll1_clk,
+ .calc_rate = &aux_calc_rate,
+ .recalc = &aux_clk_recalc,
+ .set_rate = &aux_clk_set_rate,
+ .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2},
+ .private_data = &clcd_synth_config,
};
/* clcd parents */
static struct pclk_info clcd_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &clcd_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
.en_reg_bit = CLCD_CLK_ENB,
.pclk_sel = &clcd_pclk_sel,
.pclk_sel_shift = CLCD_CLK_SHIFT,
- .recalc = &aux_clk_recalc,
- .private_data = &clcd_config,
+ .recalc = &follow_parent,
+};
+
+/* gpt synthesizer masks */
+static struct gpt_clk_masks gpt_masks = {
+ .mscale_sel_mask = GPT_MSCALE_MASK,
+ .mscale_sel_shift = GPT_MSCALE_SHIFT,
+ .nscale_sel_mask = GPT_NSCALE_MASK,
+ .nscale_sel_shift = GPT_NSCALE_SHIFT,
+};
+
+/* gpt rate configuration table, in ascending order of rates */
+struct gpt_rate_tbl gpt_rtbl[] = {
+ /* For pll1 = 332 MHz */
+ {.mscale = 4, .nscale = 0}, /* 41.5 MHz */
+ {.mscale = 2, .nscale = 0}, /* 55.3 MHz */
+ {.mscale = 1, .nscale = 0}, /* 83 MHz */
+};
+
+/* gpt0 synth clk config*/
+static struct gpt_clk_config gpt0_synth_config = {
+ .synth_reg = PRSC1_CLK_CFG,
+ .masks = &gpt_masks,
+};
+
+/* gpt synth clock */
+static struct clk gpt0_synth_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .calc_rate = &gpt_calc_rate,
+ .recalc = &gpt_clk_recalc,
+ .set_rate = &gpt_clk_set_rate,
+ .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+ .private_data = &gpt0_synth_config,
};
/* gpt parents */
-static struct pclk_info gpt_pclk_info[] = {
+static struct pclk_info gpt0_pclk_info[] = {
{
- .pclk = &pll1_clk,
- .pclk_mask = AUX_CLK_PLL1_MASK,
- .scalable = 1,
+ .pclk = &gpt0_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
- .pclk_mask = AUX_CLK_PLL3_MASK,
- .scalable = 0,
+ .pclk_val = AUX_CLK_PLL3_VAL,
},
};
/* gpt parent select structure */
-static struct pclk_sel gpt_pclk_sel = {
- .pclk_info = gpt_pclk_info,
- .pclk_count = ARRAY_SIZE(gpt_pclk_info),
+static struct pclk_sel gpt0_pclk_sel = {
+ .pclk_info = gpt0_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = GPT_CLK_MASK,
};
-/* gpt0_1 configurations */
-static struct aux_clk_config gpt0_1_config = {
- .synth_reg = PRSC1_CLK_CFG,
-};
-
/* gpt0 ARM1 subsystem timer clock */
static struct clk gpt0_clk = {
.flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel = &gpt0_pclk_sel,
.pclk_sel_shift = GPT0_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt0_1_config,
+ .recalc = &follow_parent,
+};
+
+
+/* Note: gpt0 and gpt1 share same parent clocks */
+/* gpt parent select structure */
+static struct pclk_sel gpt1_pclk_sel = {
+ .pclk_info = gpt0_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt0_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt1 timer clock */
static struct clk gpt1_clk = {
.flags = ALWAYS_ENABLED,
- .pclk_sel = &gpt_pclk_sel,
+ .pclk_sel = &gpt1_pclk_sel,
.pclk_sel_shift = GPT1_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt0_1_config,
+ .recalc = &follow_parent,
};
-/* gpt2 configurations */
-static struct aux_clk_config gpt2_config = {
+/* gpt2 synth clk config*/
+static struct gpt_clk_config gpt2_synth_config = {
.synth_reg = PRSC2_CLK_CFG,
+ .masks = &gpt_masks,
+};
+
+/* gpt synth clock */
+static struct clk gpt2_synth_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .calc_rate = &gpt_calc_rate,
+ .recalc = &gpt_clk_recalc,
+ .set_rate = &gpt_clk_set_rate,
+ .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+ .private_data = &gpt2_synth_config,
+};
+
+/* gpt parents */
+static struct pclk_info gpt2_pclk_info[] = {
+ {
+ .pclk = &gpt2_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
+ }, {
+ .pclk = &pll3_48m_clk,
+ .pclk_val = AUX_CLK_PLL3_VAL,
+ },
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt2_pclk_sel = {
+ .pclk_info = gpt2_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt2_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt2 timer clock */
static struct clk gpt2_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPT2_CLK_ENB,
- .pclk_sel = &gpt_pclk_sel,
+ .flags = ALWAYS_ENABLED,
+ .pclk_sel = &gpt2_pclk_sel,
.pclk_sel_shift = GPT2_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt2_config,
+ .recalc = &follow_parent,
};
-/* gpt3 configurations */
-static struct aux_clk_config gpt3_config = {
+/* gpt3 synth clk config*/
+static struct gpt_clk_config gpt3_synth_config = {
.synth_reg = PRSC3_CLK_CFG,
+ .masks = &gpt_masks,
+};
+
+/* gpt synth clock */
+static struct clk gpt3_synth_clk = {
+ .flags = ALWAYS_ENABLED,
+ .pclk = &pll1_clk,
+ .calc_rate = &gpt_calc_rate,
+ .recalc = &gpt_clk_recalc,
+ .set_rate = &gpt_clk_set_rate,
+ .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
+ .private_data = &gpt3_synth_config,
+};
+
+/* gpt parents */
+static struct pclk_info gpt3_pclk_info[] = {
+ {
+ .pclk = &gpt3_synth_clk,
+ .pclk_val = AUX_CLK_PLL1_VAL,
+ }, {
+ .pclk = &pll3_48m_clk,
+ .pclk_val = AUX_CLK_PLL3_VAL,
+ },
+};
+
+/* gpt parent select structure */
+static struct pclk_sel gpt3_pclk_sel = {
+ .pclk_info = gpt3_pclk_info,
+ .pclk_count = ARRAY_SIZE(gpt3_pclk_info),
+ .pclk_sel_reg = PERIP_CLK_CFG,
+ .pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt3 timer clock */
static struct clk gpt3_clk = {
- .en_reg = PERIP1_CLK_ENB,
- .en_reg_bit = GPT3_CLK_ENB,
- .pclk_sel = &gpt_pclk_sel,
+ .flags = ALWAYS_ENABLED,
+ .pclk_sel = &gpt3_pclk_sel,
.pclk_sel_shift = GPT3_CLK_SHIFT,
- .recalc = &gpt_clk_recalc,
- .private_data = &gpt3_config,
+ .recalc = &follow_parent,
};
/* clock derived from pll3 clk */
};
/* clock derived from ahb clk */
+/* apb masks structure */
+static struct bus_clk_masks apb_masks = {
+ .mask = HCLK_PCLK_RATIO_MASK,
+ .shift = HCLK_PCLK_RATIO_SHIFT,
+};
+
/* apb configuration structure */
static struct bus_clk_config apb_config = {
.reg = CORE_CLK_CFG,
- .mask = HCLK_PCLK_RATIO_MASK,
- .shift = HCLK_PCLK_RATIO_SHIFT,
+ .masks = &apb_masks,
};
/* apb clock */
static struct clk apb_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &ahb_clk,
+ .calc_rate = &bus_calc_rate,
.recalc = &bus_clk_recalc,
+ .set_rate = &bus_clk_set_rate,
+ .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
.private_data = &apb_config,
};
/* array of all spear 6xx clock lookups */
static struct clk_lookup spear_clk_lookups[] = {
- { .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
+ { .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
/* root clks */
{ .con_id = "osc_32k_clk", .clk = &osc_32k_clk},
{ .con_id = "osc_30m_clk", .clk = &osc_30m_clk},
/* clock derived from 32 KHz os clk */
- { .dev_id = "rtc", .clk = &rtc_clk},
+ { .dev_id = "rtc-spear", .clk = &rtc_clk},
/* clock derived from 30 MHz os clk */
{ .con_id = "pll1_clk", .clk = &pll1_clk},
{ .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk},
/* clock derived from pll1 clk */
{ .con_id = "cpu_clk", .clk = &cpu_clk},
{ .con_id = "ahb_clk", .clk = &ahb_clk},
+ { .con_id = "uart_synth_clk", .clk = &uart_synth_clk},
+ { .con_id = "firda_synth_clk", .clk = &firda_synth_clk},
+ { .con_id = "clcd_synth_clk", .clk = &clcd_synth_clk},
+ { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk},
+ { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk},
+ { .con_id = "gpt3_synth_clk", .clk = &gpt3_synth_clk},
{ .dev_id = "uart0", .clk = &uart0_clk},
{ .dev_id = "uart1", .clk = &uart1_clk},
{ .dev_id = "firda", .clk = &firda_clk},
{ .dev_id = "gpt2", .clk = &gpt2_clk},
{ .dev_id = "gpt3", .clk = &gpt3_clk},
/* clock derived from pll3 clk */
- { .dev_id = "usbh0", .clk = &usbh0_clk},
- { .dev_id = "usbh1", .clk = &usbh1_clk},
- { .dev_id = "usbd", .clk = &usbd_clk},
+ { .dev_id = "designware_udc", .clk = &usbd_clk},
+ { .con_id = "usbh.0_clk", .clk = &usbh0_clk},
+ { .con_id = "usbh.1_clk", .clk = &usbh1_clk},
/* clock derived from ahb clk */
{ .con_id = "apb_clk", .clk = &apb_clk},
- { .dev_id = "i2c", .clk = &i2c_clk},
+ { .dev_id = "i2c_designware.0", .clk = &i2c_clk},
{ .dev_id = "dma", .clk = &dma_clk},
{ .dev_id = "jpeg", .clk = &jpeg_clk},
{ .dev_id = "gmac", .clk = &gmac_clk},
{ .dev_id = "smi", .clk = &smi_clk},
- { .dev_id = "fsmc", .clk = &fsmc_clk},
+ { .con_id = "fsmc", .clk = &fsmc_clk},
/* clock derived from apb clk */
{ .dev_id = "adc", .clk = &adc_clk},
- { .dev_id = "ssp0", .clk = &ssp0_clk},
- { .dev_id = "ssp1", .clk = &ssp1_clk},
- { .dev_id = "ssp2", .clk = &ssp2_clk},
+ { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk},
+ { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk},
+ { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk},
{ .dev_id = "gpio0", .clk = &gpio0_clk},
{ .dev_id = "gpio1", .clk = &gpio1_clk},
{ .dev_id = "gpio2", .clk = &gpio2_clk},
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <mach/spear.h>
#include <asm/hardware/vic.h>
+#include <mach/hardware.h>
.macro disable_fiq
.endm
#ifndef __MACH_GENERIC_H
#define __MACH_GENERIC_H
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/amba/bus.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
/*
* Each GPT has 2 timer channels
/* Add spear6xx family device structure declarations here */
extern struct amba_device gpio_device[];
extern struct amba_device uart_device[];
-extern struct sys_timer spear_sys_timer;
+extern struct sys_timer spear6xx_timer;
/* Add spear6xx family function declarations here */
+void __init spear_setup_timer(void);
void __init spear6xx_map_io(void);
void __init spear6xx_init_irq(void);
void __init spear6xx_init(void);
#ifndef __MACH_HARDWARE_H
#define __MACH_HARDWARE_H
+#include <plat/hardware.h>
+#include <mach/spear.h>
+
/* Vitual to physical translation of statically mapped space */
#define IO_ADDRESS(x) (x | 0xF0000000)
#endif /* __MACH_HARDWARE_H */
-
#ifndef __MACH_MISC_REGS_H
#define __MACH_MISC_REGS_H
-#include <mach/spear.h>
+#include <mach/hardware.h>
-#define MISC_BASE VA_SPEAR6XX_ICM3_MISC_REG_BASE
+#define MISC_BASE IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE)
-#define SOC_CFG_CTR ((unsigned int *)(MISC_BASE + 0x000))
-#define DIAG_CFG_CTR ((unsigned int *)(MISC_BASE + 0x004))
-#define PLL1_CTR ((unsigned int *)(MISC_BASE + 0x008))
-#define PLL1_FRQ ((unsigned int *)(MISC_BASE + 0x00C))
-#define PLL1_MOD ((unsigned int *)(MISC_BASE + 0x010))
-#define PLL2_CTR ((unsigned int *)(MISC_BASE + 0x014))
+#define SOC_CFG_CTR (MISC_BASE + 0x000)
+#define DIAG_CFG_CTR (MISC_BASE + 0x004)
+#define PLL1_CTR (MISC_BASE + 0x008)
+#define PLL1_FRQ (MISC_BASE + 0x00C)
+#define PLL1_MOD (MISC_BASE + 0x010)
+#define PLL2_CTR (MISC_BASE + 0x014)
/* PLL_CTR register masks */
#define PLL_ENABLE 2
#define PLL_MODE_SHIFT 4
#define PLL_MODE_DITH_DSB 2
#define PLL_MODE_DITH_SSB 3
-#define PLL2_FRQ ((unsigned int *)(MISC_BASE + 0x018))
+#define PLL2_FRQ (MISC_BASE + 0x018)
/* PLL FRQ register masks */
#define PLL_DIV_N_SHIFT 0
#define PLL_DIV_N_MASK 0xFF
#define PLL_DITH_FDBK_M_SHIFT 16
#define PLL_DITH_FDBK_M_MASK 0xFFFF
-#define PLL2_MOD ((unsigned int *)(MISC_BASE + 0x01C))
-#define PLL_CLK_CFG ((unsigned int *)(MISC_BASE + 0x020))
-#define CORE_CLK_CFG ((unsigned int *)(MISC_BASE + 0x024))
+#define PLL2_MOD (MISC_BASE + 0x01C)
+#define PLL_CLK_CFG (MISC_BASE + 0x020)
+#define CORE_CLK_CFG (MISC_BASE + 0x024)
/* CORE CLK CFG register masks */
#define PLL_HCLK_RATIO_SHIFT 10
#define PLL_HCLK_RATIO_MASK 0x3
#define HCLK_PCLK_RATIO_SHIFT 8
#define HCLK_PCLK_RATIO_MASK 0x3
-#define PERIP_CLK_CFG ((unsigned int *)(MISC_BASE + 0x028))
+#define PERIP_CLK_CFG (MISC_BASE + 0x028)
/* PERIP_CLK_CFG register masks */
#define CLCD_CLK_SHIFT 2
#define CLCD_CLK_MASK 0x3
#define GPT2_CLK_SHIFT 11
#define GPT3_CLK_SHIFT 12
#define GPT_CLK_MASK 0x1
-#define AUX_CLK_PLL3_MASK 0
-#define AUX_CLK_PLL1_MASK 1
+#define AUX_CLK_PLL3_VAL 0
+#define AUX_CLK_PLL1_VAL 1
-#define PERIP1_CLK_ENB ((unsigned int *)(MISC_BASE + 0x02C))
+#define PERIP1_CLK_ENB (MISC_BASE + 0x02C)
/* PERIP1_CLK_ENB register masks */
#define UART0_CLK_ENB 3
#define UART1_CLK_ENB 4
#define USBH0_CLK_ENB 25
#define USBH1_CLK_ENB 26
-#define SOC_CORE_ID ((unsigned int *)(MISC_BASE + 0x030))
-#define RAS_CLK_ENB ((unsigned int *)(MISC_BASE + 0x034))
-#define PERIP1_SOF_RST ((unsigned int *)(MISC_BASE + 0x038))
+#define SOC_CORE_ID (MISC_BASE + 0x030)
+#define RAS_CLK_ENB (MISC_BASE + 0x034)
+#define PERIP1_SOF_RST (MISC_BASE + 0x038)
/* PERIP1_SOF_RST register masks */
#define JPEG_SOF_RST 8
-#define SOC_USER_ID ((unsigned int *)(MISC_BASE + 0x03C))
-#define RAS_SOF_RST ((unsigned int *)(MISC_BASE + 0x040))
-#define PRSC1_CLK_CFG ((unsigned int *)(MISC_BASE + 0x044))
-#define PRSC2_CLK_CFG ((unsigned int *)(MISC_BASE + 0x048))
-#define PRSC3_CLK_CFG ((unsigned int *)(MISC_BASE + 0x04C))
+#define SOC_USER_ID (MISC_BASE + 0x03C)
+#define RAS_SOF_RST (MISC_BASE + 0x040)
+#define PRSC1_CLK_CFG (MISC_BASE + 0x044)
+#define PRSC2_CLK_CFG (MISC_BASE + 0x048)
+#define PRSC3_CLK_CFG (MISC_BASE + 0x04C)
/* gpt synthesizer register masks */
#define GPT_MSCALE_SHIFT 0
#define GPT_MSCALE_MASK 0xFFF
#define GPT_NSCALE_SHIFT 12
#define GPT_NSCALE_MASK 0xF
-#define AMEM_CLK_CFG ((unsigned int *)(MISC_BASE + 0x050))
-#define EXPI_CLK_CFG ((unsigned int *)(MISC_BASE + 0x054))
-#define CLCD_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x05C))
-#define FIRDA_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x060))
-#define UART_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x064))
-#define GMAC_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x068))
-#define RAS1_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x06C))
-#define RAS2_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x070))
-#define RAS3_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x074))
-#define RAS4_CLK_SYNT ((unsigned int *)(MISC_BASE + 0x078))
+#define AMEM_CLK_CFG (MISC_BASE + 0x050)
+#define EXPI_CLK_CFG (MISC_BASE + 0x054)
+#define CLCD_CLK_SYNT (MISC_BASE + 0x05C)
+#define FIRDA_CLK_SYNT (MISC_BASE + 0x060)
+#define UART_CLK_SYNT (MISC_BASE + 0x064)
+#define GMAC_CLK_SYNT (MISC_BASE + 0x068)
+#define RAS1_CLK_SYNT (MISC_BASE + 0x06C)
+#define RAS2_CLK_SYNT (MISC_BASE + 0x070)
+#define RAS3_CLK_SYNT (MISC_BASE + 0x074)
+#define RAS4_CLK_SYNT (MISC_BASE + 0x078)
/* aux clk synthesiser register masks for irda to ras4 */
+#define AUX_SYNT_ENB 31
#define AUX_EQ_SEL_SHIFT 30
#define AUX_EQ_SEL_MASK 1
#define AUX_EQ1_SEL 0
#define AUX_YSCALE_SHIFT 0
#define AUX_YSCALE_MASK 0xFFF
-#define ICM1_ARB_CFG ((unsigned int *)(MISC_BASE + 0x07C))
-#define ICM2_ARB_CFG ((unsigned int *)(MISC_BASE + 0x080))
-#define ICM3_ARB_CFG ((unsigned int *)(MISC_BASE + 0x084))
-#define ICM4_ARB_CFG ((unsigned int *)(MISC_BASE + 0x088))
-#define ICM5_ARB_CFG ((unsigned int *)(MISC_BASE + 0x08C))
-#define ICM6_ARB_CFG ((unsigned int *)(MISC_BASE + 0x090))
-#define ICM7_ARB_CFG ((unsigned int *)(MISC_BASE + 0x094))
-#define ICM8_ARB_CFG ((unsigned int *)(MISC_BASE + 0x098))
-#define ICM9_ARB_CFG ((unsigned int *)(MISC_BASE + 0x09C))
-#define DMA_CHN_CFG ((unsigned int *)(MISC_BASE + 0x0A0))
-#define USB2_PHY_CFG ((unsigned int *)(MISC_BASE + 0x0A4))
-#define GMAC_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0A8))
-#define EXPI_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0AC))
-#define PRC1_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C0))
-#define PRC2_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C4))
-#define PRC3_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0C8))
-#define PRC4_LOCK_CTR ((unsigned int *)(MISC_BASE + 0x0CC))
-#define PRC1_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D0))
-#define PRC2_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D4))
-#define PRC3_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0D8))
-#define PRC4_IRQ_CTR ((unsigned int *)(MISC_BASE + 0x0DC))
-#define PWRDOWN_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0E0))
-#define COMPSSTL_1V8_CFG ((unsigned int *)(MISC_BASE + 0x0E4))
-#define COMPSSTL_2V5_CFG ((unsigned int *)(MISC_BASE + 0x0E8))
-#define COMPCOR_3V3_CFG ((unsigned int *)(MISC_BASE + 0x0EC))
-#define SSTLPAD_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F0))
-#define BIST1_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F4))
-#define BIST2_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0F8))
-#define BIST3_CFG_CTR ((unsigned int *)(MISC_BASE + 0x0FC))
-#define BIST4_CFG_CTR ((unsigned int *)(MISC_BASE + 0x100))
-#define BIST5_CFG_CTR ((unsigned int *)(MISC_BASE + 0x104))
-#define BIST1_STS_RES ((unsigned int *)(MISC_BASE + 0x108))
-#define BIST2_STS_RES ((unsigned int *)(MISC_BASE + 0x10C))
-#define BIST3_STS_RES ((unsigned int *)(MISC_BASE + 0x110))
-#define BIST4_STS_RES ((unsigned int *)(MISC_BASE + 0x114))
-#define BIST5_STS_RES ((unsigned int *)(MISC_BASE + 0x118))
-#define SYSERR_CFG_CTR ((unsigned int *)(MISC_BASE + 0x11C))
+#define ICM1_ARB_CFG (MISC_BASE + 0x07C)
+#define ICM2_ARB_CFG (MISC_BASE + 0x080)
+#define ICM3_ARB_CFG (MISC_BASE + 0x084)
+#define ICM4_ARB_CFG (MISC_BASE + 0x088)
+#define ICM5_ARB_CFG (MISC_BASE + 0x08C)
+#define ICM6_ARB_CFG (MISC_BASE + 0x090)
+#define ICM7_ARB_CFG (MISC_BASE + 0x094)
+#define ICM8_ARB_CFG (MISC_BASE + 0x098)
+#define ICM9_ARB_CFG (MISC_BASE + 0x09C)
+#define DMA_CHN_CFG (MISC_BASE + 0x0A0)
+#define USB2_PHY_CFG (MISC_BASE + 0x0A4)
+#define GMAC_CFG_CTR (MISC_BASE + 0x0A8)
+#define EXPI_CFG_CTR (MISC_BASE + 0x0AC)
+#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0)
+#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4)
+#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8)
+#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC)
+#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0)
+#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4)
+#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8)
+#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC)
+#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0)
+#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4)
+#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8)
+#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC)
+#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0)
+#define BIST1_CFG_CTR (MISC_BASE + 0x0F4)
+#define BIST2_CFG_CTR (MISC_BASE + 0x0F8)
+#define BIST3_CFG_CTR (MISC_BASE + 0x0FC)
+#define BIST4_CFG_CTR (MISC_BASE + 0x100)
+#define BIST5_CFG_CTR (MISC_BASE + 0x104)
+#define BIST1_STS_RES (MISC_BASE + 0x108)
+#define BIST2_STS_RES (MISC_BASE + 0x10C)
+#define BIST3_STS_RES (MISC_BASE + 0x110)
+#define BIST4_STS_RES (MISC_BASE + 0x114)
+#define BIST5_STS_RES (MISC_BASE + 0x118)
+#define SYSERR_CFG_CTR (MISC_BASE + 0x11C)
#endif /* __MACH_MISC_REGS_H */
#ifndef __MACH_SPEAR6XX_H
#define __MACH_SPEAR6XX_H
-#include <mach/hardware.h>
+#include <asm/memory.h>
#include <mach/spear600.h>
-#define SPEAR6XX_ML_SDRAM_BASE 0x00000000
-#define SPEAR6XX_ML_SDRAM_SIZE 0x40000000
-
+#define SPEAR6XX_ML_SDRAM_BASE UL(0x00000000)
/* ICM1 - Low speed connection */
-#define SPEAR6XX_ICM1_BASE 0xD0000000
-#define SPEAR6XX_ICM1_SIZE 0x08000000
+#define SPEAR6XX_ICM1_BASE UL(0xD0000000)
-#define SPEAR6XX_ICM1_UART0_BASE 0xD0000000
+#define SPEAR6XX_ICM1_UART0_BASE UL(0xD0000000)
#define VA_SPEAR6XX_ICM1_UART0_BASE IO_ADDRESS(SPEAR6XX_ICM1_UART0_BASE)
-#define SPEAR6XX_ICM1_UART0_SIZE 0x00080000
-
-#define SPEAR6XX_ICM1_UART1_BASE 0xD0080000
-#define SPEAR6XX_ICM1_UART1_SIZE 0x00080000
-
-#define SPEAR6XX_ICM1_SSP0_BASE 0xD0100000
-#define SPEAR6XX_ICM1_SSP0_SIZE 0x00080000
-
-#define SPEAR6XX_ICM1_SSP1_BASE 0xD0180000
-#define SPEAR6XX_ICM1_SSP1_SIZE 0x00080000
-
-#define SPEAR6XX_ICM1_I2C_BASE 0xD0200000
-#define SPEAR6XX_ICM1_I2C_SIZE 0x00080000
-#define SPEAR6XX_ICM1_JPEG_BASE 0xD0800000
-#define SPEAR6XX_ICM1_JPEG_SIZE 0x00800000
-
-#define SPEAR6XX_ICM1_IRDA_BASE 0xD1000000
-#define SPEAR6XX_ICM1_IRDA_SIZE 0x00800000
-
-#define SPEAR6XX_ICM1_FSMC_BASE 0xD1800000
-#define SPEAR6XX_ICM1_FSMC_SIZE 0x00800000
-
-#define SPEAR6XX_ICM1_NAND_BASE 0xD2000000
-#define SPEAR6XX_ICM1_NAND_SIZE 0x00800000
-
-#define SPEAR6XX_ICM1_SRAM_BASE 0xD2800000
-#define SPEAR6XX_ICM1_SRAM_SIZE 0x00800000
+#define SPEAR6XX_ICM1_UART1_BASE UL(0xD0080000)
+#define SPEAR6XX_ICM1_SSP0_BASE UL(0xD0100000)
+#define SPEAR6XX_ICM1_SSP1_BASE UL(0xD0180000)
+#define SPEAR6XX_ICM1_I2C_BASE UL(0xD0200000)
+#define SPEAR6XX_ICM1_JPEG_BASE UL(0xD0800000)
+#define SPEAR6XX_ICM1_IRDA_BASE UL(0xD1000000)
+#define SPEAR6XX_ICM1_FSMC_BASE UL(0xD1800000)
+#define SPEAR6XX_ICM1_NAND_BASE UL(0xD2000000)
+#define SPEAR6XX_ICM1_SRAM_BASE UL(0xD2800000)
/* ICM2 - Application Subsystem */
-#define SPEAR6XX_ICM2_BASE 0xD8000000
-#define SPEAR6XX_ICM2_SIZE 0x08000000
-
-#define SPEAR6XX_ICM2_TMR0_BASE 0xD8000000
-#define SPEAR6XX_ICM2_TMR0_SIZE 0x00080000
-
-#define SPEAR6XX_ICM2_TMR1_BASE 0xD8080000
-#define SPEAR6XX_ICM2_TMR1_SIZE 0x00080000
-
-#define SPEAR6XX_ICM2_GPIO_BASE 0xD8100000
-#define SPEAR6XX_ICM2_GPIO_SIZE 0x00080000
-
-#define SPEAR6XX_ICM2_SPI2_BASE 0xD8180000
-#define SPEAR6XX_ICM2_SPI2_SIZE 0x00080000
-
-#define SPEAR6XX_ICM2_ADC_BASE 0xD8200000
-#define SPEAR6XX_ICM2_ADC_SIZE 0x00080000
+#define SPEAR6XX_ICM2_BASE UL(0xD8000000)
+#define SPEAR6XX_ICM2_TMR0_BASE UL(0xD8000000)
+#define SPEAR6XX_ICM2_TMR1_BASE UL(0xD8080000)
+#define SPEAR6XX_ICM2_GPIO_BASE UL(0xD8100000)
+#define SPEAR6XX_ICM2_SSP2_BASE UL(0xD8180000)
+#define SPEAR6XX_ICM2_ADC_BASE UL(0xD8200000)
/* ML-1, 2 - Multi Layer CPU Subsystem */
-#define SPEAR6XX_ML_CPU_BASE 0xF0000000
-#define SPEAR6XX_ML_CPU_SIZE 0x08000000
-
-#define SPEAR6XX_CPU_TMR_BASE 0xF0000000
-#define SPEAR6XX_CPU_TMR_SIZE 0x00100000
-
-#define SPEAR6XX_CPU_GPIO_BASE 0xF0100000
-#define SPEAR6XX_CPU_GPIO_SIZE 0x00100000
-
-#define SPEAR6XX_CPU_VIC_SEC_BASE 0xF1000000
+#define SPEAR6XX_ML_CPU_BASE UL(0xF0000000)
+#define SPEAR6XX_CPU_TMR_BASE UL(0xF0000000)
+#define SPEAR6XX_CPU_GPIO_BASE UL(0xF0100000)
+#define SPEAR6XX_CPU_VIC_SEC_BASE UL(0xF1000000)
#define VA_SPEAR6XX_CPU_VIC_SEC_BASE IO_ADDRESS(SPEAR6XX_CPU_VIC_SEC_BASE)
-#define SPEAR6XX_CPU_VIC_SEC_SIZE 0x00100000
-
-#define SPEAR6XX_CPU_VIC_PRI_BASE 0xF1100000
+#define SPEAR6XX_CPU_VIC_PRI_BASE UL(0xF1100000)
#define VA_SPEAR6XX_CPU_VIC_PRI_BASE IO_ADDRESS(SPEAR6XX_CPU_VIC_PRI_BASE)
-#define SPEAR6XX_CPU_VIC_PRI_SIZE 0x00100000
/* ICM3 - Basic Subsystem */
-#define SPEAR6XX_ICM3_BASE 0xF8000000
-#define SPEAR6XX_ICM3_SIZE 0x08000000
-
-#define SPEAR6XX_ICM3_SMEM_BASE 0xF8000000
-#define SPEAR6XX_ICM3_SMEM_SIZE 0x04000000
-
-#define SPEAR6XX_ICM3_SMI_CTRL_BASE 0xFC000000
-#define SPEAR6XX_ICM3_SMI_CTRL_SIZE 0x00200000
-
-#define SPEAR6XX_ICM3_CLCD_BASE 0xFC200000
-#define SPEAR6XX_ICM3_CLCD_SIZE 0x00200000
-
-#define SPEAR6XX_ICM3_DMA_BASE 0xFC400000
-#define SPEAR6XX_ICM3_DMA_SIZE 0x00200000
-
-#define SPEAR6XX_ICM3_SDRAM_CTRL_BASE 0xFC600000
-#define SPEAR6XX_ICM3_SDRAM_CTRL_SIZE 0x00200000
-
-#define SPEAR6XX_ICM3_TMR_BASE 0xFC800000
-#define SPEAR6XX_ICM3_TMR_SIZE 0x00080000
-
-#define SPEAR6XX_ICM3_WDT_BASE 0xFC880000
-#define SPEAR6XX_ICM3_WDT_SIZE 0x00080000
-
-#define SPEAR6XX_ICM3_RTC_BASE 0xFC900000
-#define SPEAR6XX_ICM3_RTC_SIZE 0x00080000
-
-#define SPEAR6XX_ICM3_GPIO_BASE 0xFC980000
-#define SPEAR6XX_ICM3_GPIO_SIZE 0x00080000
-
-#define SPEAR6XX_ICM3_SYS_CTRL_BASE 0xFCA00000
+#define SPEAR6XX_ICM3_BASE UL(0xF8000000)
+#define SPEAR6XX_ICM3_SMEM_BASE UL(0xF8000000)
+#define SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000)
+#define SPEAR6XX_ICM3_CLCD_BASE UL(0xFC200000)
+#define SPEAR6XX_ICM3_DMA_BASE UL(0xFC400000)
+#define SPEAR6XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000)
+#define SPEAR6XX_ICM3_TMR_BASE UL(0xFC800000)
+#define SPEAR6XX_ICM3_WDT_BASE UL(0xFC880000)
+#define SPEAR6XX_ICM3_RTC_BASE UL(0xFC900000)
+#define SPEAR6XX_ICM3_GPIO_BASE UL(0xFC980000)
+#define SPEAR6XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000)
#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR6XX_ICM3_SYS_CTRL_BASE)
-#define SPEAR6XX_ICM3_SYS_CTRL_SIZE 0x00080000
-
-#define SPEAR6XX_ICM3_MISC_REG_BASE 0xFCA80000
+#define SPEAR6XX_ICM3_MISC_REG_BASE UL(0xFCA80000)
#define VA_SPEAR6XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR6XX_ICM3_MISC_REG_BASE)
-#define SPEAR6XX_ICM3_MISC_REG_SIZE 0x00080000
/* ICM4 - High Speed Connection */
-#define SPEAR6XX_ICM4_BASE 0xE0000000
-#define SPEAR6XX_ICM4_SIZE 0x08000000
-
-#define SPEAR6XX_ICM4_GMAC_BASE 0xE0800000
-#define SPEAR6XX_ICM4_GMAC_SIZE 0x00800000
-
-#define SPEAR6XX_ICM4_USBD_FIFO_BASE 0xE1000000
-#define SPEAR6XX_ICM4_USBD_FIFO_SIZE 0x00100000
-
-#define SPEAR6XX_ICM4_USBD_CSR_BASE 0xE1100000
-#define SPEAR6XX_ICM4_USBD_CSR_SIZE 0x00100000
-
-#define SPEAR6XX_ICM4_USBD_PLDT_BASE 0xE1200000
-#define SPEAR6XX_ICM4_USBD_PLDT_SIZE 0x00100000
-
-#define SPEAR6XX_ICM4_USB_EHCI0_BASE 0xE1800000
-#define SPEAR6XX_ICM4_USB_EHCI0_SIZE 0x00100000
-
-#define SPEAR6XX_ICM4_USB_OHCI0_BASE 0xE1900000
-#define SPEAR6XX_ICM4_USB_OHCI0_SIZE 0x00100000
-
-#define SPEAR6XX_ICM4_USB_EHCI1_BASE 0xE2000000
-#define SPEAR6XX_ICM4_USB_EHCI1_SIZE 0x00100000
-
-#define SPEAR6XX_ICM4_USB_OHCI1_BASE 0xE2100000
-#define SPEAR6XX_ICM4_USB_OHCI1_SIZE 0x00100000
-
-#define SPEAR6XX_ICM4_USB_ARB_BASE 0xE2800000
-#define SPEAR6XX_ICM4_USB_ARB_SIZE 0x00010000
+#define SPEAR6XX_ICM4_BASE UL(0xE0000000)
+#define SPEAR6XX_ICM4_GMAC_BASE UL(0xE0800000)
+#define SPEAR6XX_ICM4_USBD_FIFO_BASE UL(0xE1000000)
+#define SPEAR6XX_ICM4_USBD_CSR_BASE UL(0xE1100000)
+#define SPEAR6XX_ICM4_USBD_PLDT_BASE UL(0xE1200000)
+#define SPEAR6XX_ICM4_USB_EHCI0_BASE UL(0xE1800000)
+#define SPEAR6XX_ICM4_USB_OHCI0_BASE UL(0xE1900000)
+#define SPEAR6XX_ICM4_USB_EHCI1_BASE UL(0xE2000000)
+#define SPEAR6XX_ICM4_USB_OHCI1_BASE UL(0xE2100000)
+#define SPEAR6XX_ICM4_USB_ARB_BASE UL(0xE2800000)
/* Debug uart for linux, will be used for debug and uncompress messages */
#define SPEAR_DBG_UART_BASE SPEAR6XX_ICM1_UART0_BASE
#include <linux/ptrace.h>
#include <asm/irq.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
/* Add spear600 specific devices here */
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
static struct amba_device *amba_devs[] __initdata = {
&gpio_device[0],
.boot_params = 0x00000100,
.map_io = spear6xx_map_io,
.init_irq = spear6xx_init_irq,
- .timer = &spear_sys_timer,
+ .timer = &spear6xx_timer,
.init_machine = spear600_evb_init,
MACHINE_END
#include <asm/hardware/vic.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
-#include <mach/irqs.h>
#include <mach/generic.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
/* Add spear6xx machines common devices here */
/* uart device registration */
},
.res = {
.start = SPEAR6XX_ICM1_UART0_BASE,
- .end = SPEAR6XX_ICM1_UART0_BASE +
- SPEAR6XX_ICM1_UART0_SIZE - 1,
+ .end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_UART_0, NO_IRQ},
},
.res = {
.start = SPEAR6XX_ICM1_UART1_BASE,
- .end = SPEAR6XX_ICM1_UART1_BASE +
- SPEAR6XX_ICM1_UART1_SIZE - 1,
+ .end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_UART_1, NO_IRQ},
},
.res = {
.start = SPEAR6XX_CPU_GPIO_BASE,
- .end = SPEAR6XX_CPU_GPIO_BASE +
- SPEAR6XX_CPU_GPIO_SIZE - 1,
+ .end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_LOCAL_GPIO, NO_IRQ},
},
.res = {
.start = SPEAR6XX_ICM3_GPIO_BASE,
- .end = SPEAR6XX_ICM3_GPIO_BASE +
- SPEAR6XX_ICM3_GPIO_SIZE - 1,
+ .end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_BASIC_GPIO, NO_IRQ},
},
.res = {
.start = SPEAR6XX_ICM2_GPIO_BASE,
- .end = SPEAR6XX_ICM2_GPIO_BASE +
- SPEAR6XX_ICM2_GPIO_SIZE - 1,
+ .end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
.irq = {IRQ_APPL_GPIO, NO_IRQ},
{
.virtual = VA_SPEAR6XX_ICM1_UART0_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE),
- .length = SPEAR6XX_ICM1_UART0_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_CPU_VIC_PRI_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE),
- .length = SPEAR6XX_CPU_VIC_PRI_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_CPU_VIC_SEC_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE),
- .length = SPEAR6XX_CPU_VIC_SEC_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_ICM3_SYS_CTRL_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE),
- .length = SPEAR6XX_ICM3_MISC_REG_BASE,
+ .length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = VA_SPEAR6XX_ICM3_MISC_REG_BASE,
.pfn = __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE),
- .length = SPEAR6XX_ICM3_MISC_REG_SIZE,
+ .length = SZ_4K,
.type = MT_DEVICE
},
};
/* This will initialize clock framework */
clk_init();
}
+
+static void __init spear6xx_timer_init(void)
+{
+ char pclk_name[] = "pll3_48m_clk";
+ struct clk *gpt_clk, *pclk;
+
+ /* get the system timer clock */
+ gpt_clk = clk_get_sys("gpt0", NULL);
+ if (IS_ERR(gpt_clk)) {
+ pr_err("%s:couldn't get clk for gpt\n", __func__);
+ BUG();
+ }
+
+ /* get the suitable parent clock for timer*/
+ pclk = clk_get(NULL, pclk_name);
+ if (IS_ERR(pclk)) {
+ pr_err("%s:couldn't get %s as parent for gpt\n",
+ __func__, pclk_name);
+ BUG();
+ }
+
+ clk_set_parent(gpt_clk, pclk);
+ clk_put(gpt_clk);
+ clk_put(pclk);
+
+ spear_setup_timer();
+}
+
+struct sys_timer spear6xx_timer = {
+ .init = spear6xx_timer_init,
+};
}
MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board")
- .boot_params = PHYS_OFFSET + 0x00000100,
+ .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
.map_io = tcc8k_map_io,
.init_irq = tcc8k_init_irq,
.init_machine = tcc8k_init,
#define __MACH_TEGRA_MEMORY_H
/* physical offset of RAM */
-#define PHYS_OFFSET UL(0)
+#define PLAT_PHYS_OFFSET UL(0)
#endif
#ifdef CONFIG_MACH_U300_DUAL_RAM
-#define PHYS_OFFSET UL(0x48000000)
+#define PLAT_PHYS_OFFSET UL(0x48000000)
#define BOOT_PARAMS_OFFSET (PHYS_OFFSET + 0x100)
#else
#ifdef CONFIG_MACH_U300_2MB_ALIGNMENT_FIX
-#define PHYS_OFFSET (0x28000000 + \
+#define PLAT_PHYS_OFFSET (0x28000000 + \
(CONFIG_MACH_U300_ACCESS_MEM_SIZE - \
(CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
#else
-#define PHYS_OFFSET (0x28000000 + \
+#define PLAT_PHYS_OFFSET (0x28000000 + \
(CONFIG_MACH_U300_ACCESS_MEM_SIZE + \
(CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
#endif
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/platform.h>
-#include <mach/memory.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
+#include <asm/memory.h>
static void __init u300_reserve(void)
{
select ARM_GIC
select HAS_MTU
select NOMADIK_GPIO
+ select ARM_ERRATA_753970
menu "Ux500 SoC"
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#define BUS_OFFSET UL(0x00000000)
#endif
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
}
MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4")
- .boot_params = PHYS_OFFSET + 0x00000100,
+ .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
.map_io = ct_ca9x4_map_io,
.init_irq = ct_ca9x4_init_irq,
#if 0
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x60000000)
+#define PLAT_PHYS_OFFSET UL(0x60000000)
#endif
--- /dev/null
+if ARCH_VT8500
+
+config VTWM_VERSION_VT8500
+ bool
+
+config VTWM_VERSION_WM8505
+ bool
+
+config MACH_BV07
+ bool "Benign BV07-8500 Mini Netbook"
+ depends on ARCH_VT8500
+ select VTWM_VERSION_VT8500
+ help
+ Add support for the inexpensive 7-inch netbooks sold by many
+ Chinese distributors under various names. Note that there are
+ many hardware implementations in identical exterior, make sure
+ that yours is indeed based on a VIA VT8500 chip.
+
+config MACH_WM8505_7IN_NETBOOK
+ bool "WM8505 7-inch generic netbook"
+ depends on ARCH_VT8500
+ select VTWM_VERSION_WM8505
+ help
+ Add support for the inexpensive 7-inch netbooks sold by many
+ Chinese distributors under various names. Note that there are
+ many hardware implementations in identical exterior, make sure
+ that yours is indeed based on a WonderMedia WM8505 chip.
+
+comment "LCD panel size"
+
+config WMT_PANEL_800X480
+ bool "7-inch with 800x480 resolution"
+ depends on (FB_VT8500 || FB_WM8505)
+ default y
+ help
+ These are found in most of the netbooks in generic cases, as
+ well as in Eken M001 tablets and possibly elsewhere.
+
+ To select this panel at runtime, say y here and append
+ 'panel=800x480' to your kernel command line. Otherwise, the
+ largest one available will be used.
+
+config WMT_PANEL_800X600
+ bool "8-inch with 800x600 resolution"
+ depends on (FB_VT8500 || FB_WM8505)
+ help
+ These are found in Eken M003 tablets and possibly elsewhere.
+
+ To select this panel at runtime, say y here and append
+ 'panel=800x600' to your kernel command line. Otherwise, the
+ largest one available will be used.
+
+config WMT_PANEL_1024X576
+ bool "10-inch with 1024x576 resolution"
+ depends on (FB_VT8500 || FB_WM8505)
+ help
+ These are found in CherryPal netbooks and possibly elsewhere.
+
+ To select this panel at runtime, say y here and append
+ 'panel=1024x576' to your kernel command line. Otherwise, the
+ largest one available will be used.
+
+config WMT_PANEL_1024X600
+ bool "10-inch with 1024x600 resolution"
+ depends on (FB_VT8500 || FB_WM8505)
+ help
+ These are found in Eken M006 tablets and possibly elsewhere.
+
+ To select this panel at runtime, say y here and append
+ 'panel=1024x600' to your kernel command line. Otherwise, the
+ largest one available will be used.
+
+endif
--- /dev/null
+obj-y += devices.o gpio.o irq.o timer.o
+
+obj-$(CONFIG_VTWM_VERSION_VT8500) += devices-vt8500.o
+obj-$(CONFIG_VTWM_VERSION_WM8505) += devices-wm8505.o
+
+obj-$(CONFIG_MACH_BV07) += bv07.o
+obj-$(CONFIG_MACH_WM8505_7IN_NETBOOK) += wm8505_7in.o
+
+obj-$(CONFIG_HAVE_PWM) += pwm.o
--- /dev/null
+ zreladdr-y := 0x00008000
+params_phys-y := 0x00000100
+initrd_phys-y := 0x01000000
--- /dev/null
+/*
+ * arch/arm/mach-vt8500/bv07.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/io.h>
+#include <linux/pm.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "devices.h"
+
+static void __iomem *pmc_hiber;
+
+static struct platform_device *devices[] __initdata = {
+ &vt8500_device_uart0,
+ &vt8500_device_lcdc,
+ &vt8500_device_ehci,
+ &vt8500_device_ge_rops,
+ &vt8500_device_pwm,
+ &vt8500_device_pwmbl,
+ &vt8500_device_rtc,
+};
+
+static void vt8500_power_off(void)
+{
+ local_irq_disable();
+ writew(5, pmc_hiber);
+ asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0));
+}
+
+void __init bv07_init(void)
+{
+#ifdef CONFIG_FB_VT8500
+ void __iomem *gpio_mux_reg = ioremap(wmt_gpio_base + 0x200, 4);
+ if (gpio_mux_reg) {
+ writel(readl(gpio_mux_reg) | 1, gpio_mux_reg);
+ iounmap(gpio_mux_reg);
+ } else {
+ printk(KERN_ERR "Could not remap the GPIO mux register, display may not work properly!\n");
+ }
+#endif
+ pmc_hiber = ioremap(wmt_pmc_base + 0x12, 2);
+ if (pmc_hiber)
+ pm_power_off = &vt8500_power_off;
+ else
+ printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n");
+
+ vt8500_set_resources();
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ vt8500_gpio_init();
+}
+
+MACHINE_START(BV07, "Benign BV07 Mini Netbook")
+ .boot_params = 0x00000100,
+ .reserve = vt8500_reserve_mem,
+ .map_io = vt8500_map_io,
+ .init_irq = vt8500_init_irq,
+ .timer = &vt8500_timer,
+ .init_machine = bv07_init,
+MACHINE_END
--- /dev/null
+/* linux/arch/arm/mach-vt8500/devices-vt8500.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+
+#include <mach/vt8500_regs.h>
+#include <mach/vt8500_irqs.h>
+#include <mach/i8042.h>
+#include "devices.h"
+
+void __init vt8500_set_resources(void)
+{
+ struct resource tmp[3];
+
+ tmp[0] = wmt_mmio_res(VT8500_LCDC_BASE, SZ_1K);
+ tmp[1] = wmt_irq_res(IRQ_LCDC);
+ wmt_res_add(&vt8500_device_lcdc, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_UART0_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART0);
+ wmt_res_add(&vt8500_device_uart0, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_UART1_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART1);
+ wmt_res_add(&vt8500_device_uart1, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_UART2_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART2);
+ wmt_res_add(&vt8500_device_uart2, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_UART3_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART3);
+ wmt_res_add(&vt8500_device_uart3, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_EHCI_BASE, SZ_512);
+ tmp[1] = wmt_irq_res(IRQ_EHCI);
+ wmt_res_add(&vt8500_device_ehci, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(VT8500_GEGEA_BASE, SZ_256);
+ wmt_res_add(&vt8500_device_ge_rops, tmp, 1);
+
+ tmp[0] = wmt_mmio_res(VT8500_PWM_BASE, 0x44);
+ wmt_res_add(&vt8500_device_pwm, tmp, 1);
+
+ tmp[0] = wmt_mmio_res(VT8500_RTC_BASE, 0x2c);
+ tmp[1] = wmt_irq_res(IRQ_RTC);
+ tmp[2] = wmt_irq_res(IRQ_RTCSM);
+ wmt_res_add(&vt8500_device_rtc, tmp, 3);
+}
+
+static void __init vt8500_set_externs(void)
+{
+ /* Non-resource-aware stuff */
+ wmt_ic_base = VT8500_IC_BASE;
+ wmt_gpio_base = VT8500_GPIO_BASE;
+ wmt_pmc_base = VT8500_PMC_BASE;
+ wmt_i8042_base = VT8500_PS2_BASE;
+
+ wmt_nr_irqs = VT8500_NR_IRQS;
+ wmt_timer_irq = IRQ_PMCOS0;
+ wmt_gpio_ext_irq[0] = IRQ_EXT0;
+ wmt_gpio_ext_irq[1] = IRQ_EXT1;
+ wmt_gpio_ext_irq[2] = IRQ_EXT2;
+ wmt_gpio_ext_irq[3] = IRQ_EXT3;
+ wmt_gpio_ext_irq[4] = IRQ_EXT4;
+ wmt_gpio_ext_irq[5] = IRQ_EXT5;
+ wmt_gpio_ext_irq[6] = IRQ_EXT6;
+ wmt_gpio_ext_irq[7] = IRQ_EXT7;
+ wmt_i8042_kbd_irq = IRQ_PS2KBD;
+ wmt_i8042_aux_irq = IRQ_PS2MOUSE;
+}
+
+void __init vt8500_map_io(void)
+{
+ iotable_init(wmt_io_desc, ARRAY_SIZE(wmt_io_desc));
+
+ /* Should be done before interrupts and timers are initialized */
+ vt8500_set_externs();
+}
--- /dev/null
+/* linux/arch/arm/mach-vt8500/devices-wm8505.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/platform_device.h>
+
+#include <mach/wm8505_regs.h>
+#include <mach/wm8505_irqs.h>
+#include <mach/i8042.h>
+#include "devices.h"
+
+void __init wm8505_set_resources(void)
+{
+ struct resource tmp[3];
+
+ tmp[0] = wmt_mmio_res(WM8505_GOVR_BASE, SZ_512);
+ wmt_res_add(&vt8500_device_wm8505_fb, tmp, 1);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART0_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART0);
+ wmt_res_add(&vt8500_device_uart0, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART1_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART1);
+ wmt_res_add(&vt8500_device_uart1, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART2_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART2);
+ wmt_res_add(&vt8500_device_uart2, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART3_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART3);
+ wmt_res_add(&vt8500_device_uart3, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART4_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART4);
+ wmt_res_add(&vt8500_device_uart4, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_UART5_BASE, 0x1040);
+ tmp[1] = wmt_irq_res(IRQ_UART5);
+ wmt_res_add(&vt8500_device_uart5, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_EHCI_BASE, SZ_512);
+ tmp[1] = wmt_irq_res(IRQ_EHCI);
+ wmt_res_add(&vt8500_device_ehci, tmp, 2);
+
+ tmp[0] = wmt_mmio_res(WM8505_GEGEA_BASE, SZ_256);
+ wmt_res_add(&vt8500_device_ge_rops, tmp, 1);
+
+ tmp[0] = wmt_mmio_res(WM8505_PWM_BASE, 0x44);
+ wmt_res_add(&vt8500_device_pwm, tmp, 1);
+
+ tmp[0] = wmt_mmio_res(WM8505_RTC_BASE, 0x2c);
+ tmp[1] = wmt_irq_res(IRQ_RTC);
+ tmp[2] = wmt_irq_res(IRQ_RTCSM);
+ wmt_res_add(&vt8500_device_rtc, tmp, 3);
+}
+
+static void __init wm8505_set_externs(void)
+{
+ /* Non-resource-aware stuff */
+ wmt_ic_base = WM8505_IC_BASE;
+ wmt_sic_base = WM8505_SIC_BASE;
+ wmt_gpio_base = WM8505_GPIO_BASE;
+ wmt_pmc_base = WM8505_PMC_BASE;
+ wmt_i8042_base = WM8505_PS2_BASE;
+
+ wmt_nr_irqs = WM8505_NR_IRQS;
+ wmt_timer_irq = IRQ_PMCOS0;
+ wmt_gpio_ext_irq[0] = IRQ_EXT0;
+ wmt_gpio_ext_irq[1] = IRQ_EXT1;
+ wmt_gpio_ext_irq[2] = IRQ_EXT2;
+ wmt_gpio_ext_irq[3] = IRQ_EXT3;
+ wmt_gpio_ext_irq[4] = IRQ_EXT4;
+ wmt_gpio_ext_irq[5] = IRQ_EXT5;
+ wmt_gpio_ext_irq[6] = IRQ_EXT6;
+ wmt_gpio_ext_irq[7] = IRQ_EXT7;
+ wmt_i8042_kbd_irq = IRQ_PS2KBD;
+ wmt_i8042_aux_irq = IRQ_PS2MOUSE;
+}
+
+void __init wm8505_map_io(void)
+{
+ iotable_init(wmt_io_desc, ARRAY_SIZE(wmt_io_desc));
+
+ /* Should be done before interrupts and timers are initialized */
+ wm8505_set_externs();
+}
--- /dev/null
+/* linux/arch/arm/mach-vt8500/devices.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/memblock.h>
+
+#include <asm/mach/arch.h>
+
+#include <mach/vt8500fb.h>
+#include <mach/i8042.h>
+#include "devices.h"
+
+/* These can't use resources currently */
+unsigned long wmt_ic_base __initdata;
+unsigned long wmt_sic_base __initdata;
+unsigned long wmt_gpio_base __initdata;
+unsigned long wmt_pmc_base __initdata;
+unsigned long wmt_i8042_base __initdata;
+
+int wmt_nr_irqs __initdata;
+int wmt_timer_irq __initdata;
+int wmt_gpio_ext_irq[8] __initdata;
+
+/* Should remain accessible after init.
+ * i8042 driver desperately calls for attention...
+ */
+int wmt_i8042_kbd_irq;
+int wmt_i8042_aux_irq;
+
+static u64 fb_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device vt8500_device_lcdc = {
+ .name = "vt8500-lcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = &fb_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+struct platform_device vt8500_device_wm8505_fb = {
+ .name = "wm8505-fb",
+ .id = 0,
+};
+
+/* Smallest to largest */
+static struct vt8500fb_platform_data panels[] = {
+#ifdef CONFIG_WMT_PANEL_800X480
+{
+ .xres_virtual = 800,
+ .yres_virtual = 480 * 2,
+ .mode = {
+ .name = "800x480",
+ .xres = 800,
+ .yres = 480,
+ .left_margin = 88,
+ .right_margin = 40,
+ .upper_margin = 32,
+ .lower_margin = 11,
+ .hsync_len = 0,
+ .vsync_len = 1,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+},
+#endif
+#ifdef CONFIG_WMT_PANEL_800X600
+{
+ .xres_virtual = 800,
+ .yres_virtual = 600 * 2,
+ .mode = {
+ .name = "800x600",
+ .xres = 800,
+ .yres = 600,
+ .left_margin = 88,
+ .right_margin = 40,
+ .upper_margin = 32,
+ .lower_margin = 11,
+ .hsync_len = 0,
+ .vsync_len = 1,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+},
+#endif
+#ifdef CONFIG_WMT_PANEL_1024X576
+{
+ .xres_virtual = 1024,
+ .yres_virtual = 576 * 2,
+ .mode = {
+ .name = "1024x576",
+ .xres = 1024,
+ .yres = 576,
+ .left_margin = 40,
+ .right_margin = 24,
+ .upper_margin = 32,
+ .lower_margin = 11,
+ .hsync_len = 96,
+ .vsync_len = 2,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+},
+#endif
+#ifdef CONFIG_WMT_PANEL_1024X600
+{
+ .xres_virtual = 1024,
+ .yres_virtual = 600 * 2,
+ .mode = {
+ .name = "1024x600",
+ .xres = 1024,
+ .yres = 600,
+ .left_margin = 66,
+ .right_margin = 2,
+ .upper_margin = 19,
+ .lower_margin = 1,
+ .hsync_len = 23,
+ .vsync_len = 8,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+},
+#endif
+};
+
+static int current_panel_idx __initdata = ARRAY_SIZE(panels) - 1;
+
+static int __init panel_setup(char *str)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(panels); i++) {
+ if (strcmp(panels[i].mode.name, str) == 0) {
+ current_panel_idx = i;
+ break;
+ }
+ }
+ return 0;
+}
+
+early_param("panel", panel_setup);
+
+static inline void preallocate_fb(struct vt8500fb_platform_data *p,
+ unsigned long align) {
+ p->video_mem_len = (p->xres_virtual * p->yres_virtual * 4) >>
+ (p->bpp > 16 ? 0 : (p->bpp > 8 ? 1 :
+ (8 / p->bpp) + 1));
+ p->video_mem_phys = (unsigned long)memblock_alloc(p->video_mem_len,
+ align);
+ p->video_mem_virt = phys_to_virt(p->video_mem_phys);
+}
+
+struct platform_device vt8500_device_uart0 = {
+ .name = "vt8500_serial",
+ .id = 0,
+};
+
+struct platform_device vt8500_device_uart1 = {
+ .name = "vt8500_serial",
+ .id = 1,
+};
+
+struct platform_device vt8500_device_uart2 = {
+ .name = "vt8500_serial",
+ .id = 2,
+};
+
+struct platform_device vt8500_device_uart3 = {
+ .name = "vt8500_serial",
+ .id = 3,
+};
+
+struct platform_device vt8500_device_uart4 = {
+ .name = "vt8500_serial",
+ .id = 4,
+};
+
+struct platform_device vt8500_device_uart5 = {
+ .name = "vt8500_serial",
+ .id = 5,
+};
+
+static u64 ehci_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device vt8500_device_ehci = {
+ .name = "vt8500-ehci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ehci_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+struct platform_device vt8500_device_ge_rops = {
+ .name = "wmt_ge_rops",
+ .id = -1,
+};
+
+struct platform_device vt8500_device_pwm = {
+ .name = "vt8500-pwm",
+ .id = 0,
+};
+
+static struct platform_pwm_backlight_data vt8500_pwmbl_data = {
+ .pwm_id = 0,
+ .max_brightness = 128,
+ .dft_brightness = 70,
+ .pwm_period_ns = 250000, /* revisit when clocks are implemented */
+};
+
+struct platform_device vt8500_device_pwmbl = {
+ .name = "pwm-backlight",
+ .id = 0,
+ .dev = {
+ .platform_data = &vt8500_pwmbl_data,
+ },
+};
+
+struct platform_device vt8500_device_rtc = {
+ .name = "vt8500-rtc",
+ .id = 0,
+};
+
+struct map_desc wmt_io_desc[] __initdata = {
+ /* SoC MMIO registers */
+ [0] = {
+ .virtual = 0xf8000000,
+ .pfn = __phys_to_pfn(0xd8000000),
+ .length = 0x00390000, /* max of all chip variants */
+ .type = MT_DEVICE
+ },
+ /* PCI I/O space, numbers tied to those in <mach/io.h> */
+ [1] = {
+ .virtual = 0xf0000000,
+ .pfn = __phys_to_pfn(0xc0000000),
+ .length = SZ_64K,
+ .type = MT_DEVICE
+ },
+};
+
+void __init vt8500_reserve_mem(void)
+{
+#ifdef CONFIG_FB_VT8500
+ panels[current_panel_idx].bpp = 16; /* Always use RGB565 */
+ preallocate_fb(&panels[current_panel_idx], SZ_4M);
+ vt8500_device_lcdc.dev.platform_data = &panels[current_panel_idx];
+#endif
+}
+
+void __init wm8505_reserve_mem(void)
+{
+#if defined CONFIG_FB_WM8505
+ panels[current_panel_idx].bpp = 32; /* Always use RGB888 */
+ preallocate_fb(&panels[current_panel_idx], 32);
+ vt8500_device_wm8505_fb.dev.platform_data = &panels[current_panel_idx];
+#endif
+}
--- /dev/null
+/* linux/arch/arm/mach-vt8500/devices.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ARCH_ARM_MACH_VT8500_DEVICES_H
+#define __ARCH_ARM_MACH_VT8500_DEVICES_H
+
+#include <linux/platform_device.h>
+#include <asm/mach/map.h>
+
+void __init vt8500_init_irq(void);
+void __init wm8505_init_irq(void);
+void __init vt8500_map_io(void);
+void __init wm8505_map_io(void);
+void __init vt8500_reserve_mem(void);
+void __init wm8505_reserve_mem(void);
+void __init vt8500_gpio_init(void);
+void __init vt8500_set_resources(void);
+void __init wm8505_set_resources(void);
+
+extern unsigned long wmt_ic_base __initdata;
+extern unsigned long wmt_sic_base __initdata;
+extern unsigned long wmt_gpio_base __initdata;
+extern unsigned long wmt_pmc_base __initdata;
+
+extern int wmt_nr_irqs __initdata;
+extern int wmt_timer_irq __initdata;
+extern int wmt_gpio_ext_irq[8] __initdata;
+
+extern struct map_desc wmt_io_desc[2] __initdata;
+
+static inline struct resource wmt_mmio_res(u32 start, u32 size)
+{
+ struct resource tmp = {
+ .flags = IORESOURCE_MEM,
+ .start = start,
+ .end = start + size - 1,
+ };
+
+ return tmp;
+}
+
+static inline struct resource wmt_irq_res(int irq)
+{
+ struct resource tmp = {
+ .flags = IORESOURCE_IRQ,
+ .start = irq,
+ .end = irq,
+ };
+
+ return tmp;
+}
+
+static inline void wmt_res_add(struct platform_device *pdev,
+ const struct resource *res, unsigned int num)
+{
+ if (unlikely(platform_device_add_resources(pdev, res, num)))
+ pr_err("Failed to assign resources\n");
+}
+
+extern struct sys_timer vt8500_timer;
+
+extern struct platform_device vt8500_device_uart0;
+extern struct platform_device vt8500_device_uart1;
+extern struct platform_device vt8500_device_uart2;
+extern struct platform_device vt8500_device_uart3;
+extern struct platform_device vt8500_device_uart4;
+extern struct platform_device vt8500_device_uart5;
+
+extern struct platform_device vt8500_device_lcdc;
+extern struct platform_device vt8500_device_wm8505_fb;
+extern struct platform_device vt8500_device_ehci;
+extern struct platform_device vt8500_device_ge_rops;
+extern struct platform_device vt8500_device_pwm;
+extern struct platform_device vt8500_device_pwmbl;
+extern struct platform_device vt8500_device_rtc;
+#endif
--- /dev/null
+/* linux/arch/arm/mach-vt8500/gpio.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include "devices.h"
+
+#define to_vt8500(__chip) container_of(__chip, struct vt8500_gpio_chip, chip)
+
+#define ENABLE_REGS 0x0
+#define DIRECTION_REGS 0x20
+#define OUTVALUE_REGS 0x40
+#define INVALUE_REGS 0x60
+
+#define EXT_REGOFF 0x1c
+
+static void __iomem *regbase;
+
+struct vt8500_gpio_chip {
+ struct gpio_chip chip;
+ unsigned int shift;
+ unsigned int regoff;
+};
+
+static int gpio_to_irq_map[8];
+
+static int vt8500_muxed_gpio_request(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+ unsigned val = readl(regbase + ENABLE_REGS + vt8500_chip->regoff);
+
+ val |= (1 << vt8500_chip->shift << offset);
+ writel(val, regbase + ENABLE_REGS + vt8500_chip->regoff);
+
+ return 0;
+}
+
+static void vt8500_muxed_gpio_free(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+ unsigned val = readl(regbase + ENABLE_REGS + vt8500_chip->regoff);
+
+ val &= ~(1 << vt8500_chip->shift << offset);
+ writel(val, regbase + ENABLE_REGS + vt8500_chip->regoff);
+}
+
+static int vt8500_muxed_gpio_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+ unsigned val = readl(regbase + DIRECTION_REGS + vt8500_chip->regoff);
+
+ val &= ~(1 << vt8500_chip->shift << offset);
+ writel(val, regbase + DIRECTION_REGS + vt8500_chip->regoff);
+
+ return 0;
+}
+
+static int vt8500_muxed_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+ unsigned val = readl(regbase + DIRECTION_REGS + vt8500_chip->regoff);
+
+ val |= (1 << vt8500_chip->shift << offset);
+ writel(val, regbase + DIRECTION_REGS + vt8500_chip->regoff);
+
+ if (value) {
+ val = readl(regbase + OUTVALUE_REGS + vt8500_chip->regoff);
+ val |= (1 << vt8500_chip->shift << offset);
+ writel(val, regbase + OUTVALUE_REGS + vt8500_chip->regoff);
+ }
+ return 0;
+}
+
+static int vt8500_muxed_gpio_get_value(struct gpio_chip *chip,
+ unsigned offset)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+
+ return (readl(regbase + INVALUE_REGS + vt8500_chip->regoff)
+ >> vt8500_chip->shift >> offset) & 1;
+}
+
+static void vt8500_muxed_gpio_set_value(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+ unsigned val = readl(regbase + INVALUE_REGS + vt8500_chip->regoff);
+
+ if (value)
+ val |= (1 << vt8500_chip->shift << offset);
+ else
+ val &= ~(1 << vt8500_chip->shift << offset);
+
+ writel(val, regbase + INVALUE_REGS + vt8500_chip->regoff);
+}
+
+#define VT8500_GPIO_BANK(__name, __shift, __off, __base, __num) \
+{ \
+ .chip = { \
+ .label = __name, \
+ .request = vt8500_muxed_gpio_request, \
+ .free = vt8500_muxed_gpio_free, \
+ .direction_input = vt8500_muxed_gpio_direction_input, \
+ .direction_output = vt8500_muxed_gpio_direction_output, \
+ .get = vt8500_muxed_gpio_get_value, \
+ .set = vt8500_muxed_gpio_set_value, \
+ .can_sleep = 0, \
+ .base = __base, \
+ .ngpio = __num, \
+ }, \
+ .shift = __shift, \
+ .regoff = __off, \
+}
+
+static struct vt8500_gpio_chip vt8500_muxed_gpios[] = {
+ VT8500_GPIO_BANK("uart0", 0, 0x0, 8, 4),
+ VT8500_GPIO_BANK("uart1", 4, 0x0, 12, 4),
+ VT8500_GPIO_BANK("spi0", 8, 0x0, 16, 4),
+ VT8500_GPIO_BANK("spi1", 12, 0x0, 20, 4),
+ VT8500_GPIO_BANK("spi2", 16, 0x0, 24, 4),
+ VT8500_GPIO_BANK("pwmout", 24, 0x0, 28, 2),
+
+ VT8500_GPIO_BANK("sdmmc", 0, 0x4, 30, 11),
+ VT8500_GPIO_BANK("ms", 16, 0x4, 41, 7),
+ VT8500_GPIO_BANK("i2c0", 24, 0x4, 48, 2),
+ VT8500_GPIO_BANK("i2c1", 26, 0x4, 50, 2),
+
+ VT8500_GPIO_BANK("mii", 0, 0x8, 52, 20),
+ VT8500_GPIO_BANK("see", 20, 0x8, 72, 4),
+ VT8500_GPIO_BANK("ide", 24, 0x8, 76, 7),
+
+ VT8500_GPIO_BANK("ccir", 0, 0xc, 83, 19),
+
+ VT8500_GPIO_BANK("ts", 8, 0x10, 102, 11),
+
+ VT8500_GPIO_BANK("lcd", 0, 0x14, 113, 23),
+};
+
+static int vt8500_gpio_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ unsigned val = readl(regbase + DIRECTION_REGS + EXT_REGOFF);
+
+ val &= ~(1 << offset);
+ writel(val, regbase + DIRECTION_REGS + EXT_REGOFF);
+ return 0;
+}
+
+static int vt8500_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ unsigned val = readl(regbase + DIRECTION_REGS + EXT_REGOFF);
+
+ val |= (1 << offset);
+ writel(val, regbase + DIRECTION_REGS + EXT_REGOFF);
+
+ if (value) {
+ val = readl(regbase + OUTVALUE_REGS + EXT_REGOFF);
+ val |= (1 << offset);
+ writel(val, regbase + OUTVALUE_REGS + EXT_REGOFF);
+ }
+ return 0;
+}
+
+static int vt8500_gpio_get_value(struct gpio_chip *chip,
+ unsigned offset)
+{
+ return (readl(regbase + INVALUE_REGS + EXT_REGOFF) >> offset) & 1;
+}
+
+static void vt8500_gpio_set_value(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ unsigned val = readl(regbase + OUTVALUE_REGS + EXT_REGOFF);
+
+ if (value)
+ val |= (1 << offset);
+ else
+ val &= ~(1 << offset);
+
+ writel(val, regbase + OUTVALUE_REGS + EXT_REGOFF);
+}
+
+static int vt8500_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ if (offset > 7)
+ return -EINVAL;
+
+ return gpio_to_irq_map[offset];
+}
+
+static struct gpio_chip vt8500_external_gpios = {
+ .label = "extgpio",
+ .direction_input = vt8500_gpio_direction_input,
+ .direction_output = vt8500_gpio_direction_output,
+ .get = vt8500_gpio_get_value,
+ .set = vt8500_gpio_set_value,
+ .to_irq = vt8500_gpio_to_irq,
+ .can_sleep = 0,
+ .base = 0,
+ .ngpio = 8,
+};
+
+void __init vt8500_gpio_init(void)
+{
+ int i;
+
+ for (i = 0; i < 8; i++)
+ gpio_to_irq_map[i] = wmt_gpio_ext_irq[i];
+
+ regbase = ioremap(wmt_gpio_base, SZ_64K);
+ if (!regbase) {
+ printk(KERN_ERR "Failed to map MMIO registers for GPIO\n");
+ return;
+ }
+
+ gpiochip_add(&vt8500_external_gpios);
+
+ for (i = 0; i < ARRAY_SIZE(vt8500_muxed_gpios); i++)
+ gpiochip_add(&vt8500_muxed_gpios[i].chip);
+}
--- /dev/null
+/*
+ * arch/arm/mach-vt8500/include/mach/debug-macro.S
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * Debugging macro include header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+ .macro addruart, rp, rv
+ mov \rp, #0x00200000
+ orr \rv, \rp, #0xf8000000
+ orr \rp, \rp, #0xd8000000
+ .endm
+
+ .macro senduart,rd,rx
+ strb \rd, [\rx, #0]
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #0x1c]
+ ands \rd, \rd, #0x2
+ bne 1001b
+ .endm
+
+ .macro waituart,rd,rx
+ .endm
--- /dev/null
+/*
+ * arch/arm/mach-vt8500/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for VIA VT8500
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+ .macro disable_fiq
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ @ physical 0xd8140000 is virtual 0xf8140000
+ mov \base, #0xf8000000
+ orr \base, \base, #0x00140000
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqnr, [\base]
+ cmp \irqnr, #63 @ may be false positive, check interrupt status
+ bne 1001f
+ ldr \irqstat, [\base, #0x84]
+ ands \irqstat, #0x80000000
+ moveq \irqnr, #0
+1001:
+ .endm
+
--- /dev/null
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
--- /dev/null
+/* arch/arm/mach-vt8500/include/mach/hardware.h
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
--- /dev/null
+/* arch/arm/mach-vt8500/include/mach/i8042.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+extern unsigned long wmt_i8042_base __initdata;
+extern int wmt_i8042_kbd_irq;
+extern int wmt_i8042_aux_irq;
--- /dev/null
+/*
+ * arch/arm/mach-vt8500/include/mach/io.h
+ *
+ * Copyright (C) 2010 Alexey Charkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffff
+
+#define __io(a) __typesafe_io((a) + 0xf0000000)
+#define __mem_pci(a) (a)
+
+#endif
--- /dev/null
+/*
+ * arch/arm/mach-vt8500/include/mach/irqs.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* This value is just to make the core happy, never used otherwise */
+#define NR_IRQS 128
--- /dev/null
+/*
+ * arch/arm/mach-vt8500/include/mach/memory.h
+ *
+ * Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET UL(0x00000000)
+
+#endif
--- /dev/null
+/*
+ * arch/arm/mach-vt8500/include/mach/system.h
+ *
+ */
+#include <asm/io.h>
+
+/* PM Software Reset request register */
+#define VT8500_PMSR_VIRT 0xf8130060
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+ writel(1, VT8500_PMSR_VIRT);
+}
--- /dev/null
+/*
+ * arch/arm/mach-vt8500/include/mach/timex.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef MACH_TIMEX_H
+#define MACH_TIMEX_H
+
+#define CLOCK_TICK_RATE (3000000)
+
+#endif /* MACH_TIMEX_H */
--- /dev/null
+/* arch/arm/mach-vt8500/include/mach/uncompress.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * Based on arch/arm/mach-dove/include/mach/uncompress.h
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define UART0_PHYS 0xd8200000
+#include <asm/io.h>
+
+static void putc(const char c)
+{
+ while (readb(UART0_PHYS + 0x1c) & 0x2)
+ /* Tx busy, wait and poll */;
+
+ writeb(c, UART0_PHYS);
+}
+
+static void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
--- /dev/null
+/*
+ * arch/arm/mach-vt8500/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END 0xd0000000UL
--- /dev/null
+/*
+ * arch/arm/mach-vt8500/include/mach/vt8500_irqs.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* VT8500 Interrupt Sources */
+
+#define IRQ_JPEGENC 0 /* JPEG Encoder */
+#define IRQ_JPEGDEC 1 /* JPEG Decoder */
+ /* Reserved */
+#define IRQ_PATA 3 /* PATA Controller */
+ /* Reserved */
+#define IRQ_DMA 5 /* DMA Controller */
+#define IRQ_EXT0 6 /* External Interrupt 0 */
+#define IRQ_EXT1 7 /* External Interrupt 1 */
+#define IRQ_GE 8 /* Graphic Engine */
+#define IRQ_GOV 9 /* Graphic Overlay Engine */
+#define IRQ_ETHER 10 /* Ethernet MAC */
+#define IRQ_MPEGTS 11 /* Transport Stream Interface */
+#define IRQ_LCDC 12 /* LCD Controller */
+#define IRQ_EXT2 13 /* External Interrupt 2 */
+#define IRQ_EXT3 14 /* External Interrupt 3 */
+#define IRQ_EXT4 15 /* External Interrupt 4 */
+#define IRQ_CIPHER 16 /* Cipher */
+#define IRQ_VPP 17 /* Video Post-Processor */
+#define IRQ_I2C1 18 /* I2C 1 */
+#define IRQ_I2C0 19 /* I2C 0 */
+#define IRQ_SDMMC 20 /* SD/MMC Controller */
+#define IRQ_SDMMC_DMA 21 /* SD/MMC Controller DMA */
+#define IRQ_PMC_WU 22 /* Power Management Controller Wakeup */
+ /* Reserved */
+#define IRQ_SPI0 24 /* SPI 0 */
+#define IRQ_SPI1 25 /* SPI 1 */
+#define IRQ_SPI2 26 /* SPI 2 */
+#define IRQ_LCDDF 27 /* LCD Data Formatter */
+#define IRQ_NAND 28 /* NAND Flash Controller */
+#define IRQ_NAND_DMA 29 /* NAND Flash Controller DMA */
+#define IRQ_MS 30 /* MemoryStick Controller */
+#define IRQ_MS_DMA 31 /* MemoryStick Controller DMA */
+#define IRQ_UART0 32 /* UART 0 */
+#define IRQ_UART1 33 /* UART 1 */
+#define IRQ_I2S 34 /* I2S */
+#define IRQ_PCM 35 /* PCM */
+#define IRQ_PMCOS0 36 /* PMC OS Timer 0 */
+#define IRQ_PMCOS1 37 /* PMC OS Timer 1 */
+#define IRQ_PMCOS2 38 /* PMC OS Timer 2 */
+#define IRQ_PMCOS3 39 /* PMC OS Timer 3 */
+#define IRQ_VPU 40 /* Video Processing Unit */
+#define IRQ_VID 41 /* Video Digital Input Interface */
+#define IRQ_AC97 42 /* AC97 Interface */
+#define IRQ_EHCI 43 /* USB */
+#define IRQ_NOR 44 /* NOR Flash Controller */
+#define IRQ_PS2MOUSE 45 /* PS/2 Mouse */
+#define IRQ_PS2KBD 46 /* PS/2 Keyboard */
+#define IRQ_UART2 47 /* UART 2 */
+#define IRQ_RTC 48 /* RTC Interrupt */
+#define IRQ_RTCSM 49 /* RTC Second/Minute Update Interrupt */
+#define IRQ_UART3 50 /* UART 3 */
+#define IRQ_ADC 51 /* ADC */
+#define IRQ_EXT5 52 /* External Interrupt 5 */
+#define IRQ_EXT6 53 /* External Interrupt 6 */
+#define IRQ_EXT7 54 /* External Interrupt 7 */
+#define IRQ_CIR 55 /* CIR */
+#define IRQ_DMA0 56 /* DMA Channel 0 */
+#define IRQ_DMA1 57 /* DMA Channel 1 */
+#define IRQ_DMA2 58 /* DMA Channel 2 */
+#define IRQ_DMA3 59 /* DMA Channel 3 */
+#define IRQ_DMA4 60 /* DMA Channel 4 */
+#define IRQ_DMA5 61 /* DMA Channel 5 */
+#define IRQ_DMA6 62 /* DMA Channel 6 */
+#define IRQ_DMA7 63 /* DMA Channel 7 */
+
+#define VT8500_NR_IRQS 64
--- /dev/null
+/*
+ * arch/arm/mach-vt8500/include/mach/vt8500_regs.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_VT8500_REGS_H
+#define __ASM_ARM_ARCH_VT8500_REGS_H
+
+/* VT8500 Registers Map */
+
+#define VT8500_REGS_START_PHYS 0xd8000000 /* Start of MMIO registers */
+#define VT8500_REGS_START_VIRT 0xf8000000 /* Virtual mapping start */
+
+#define VT8500_DDR_BASE 0xd8000000 /* 1k DDR/DDR2 Memory
+ Controller */
+#define VT8500_DMA_BASE 0xd8001000 /* 1k DMA Controller */
+#define VT8500_SFLASH_BASE 0xd8002000 /* 1k Serial Flash Memory
+ Controller */
+#define VT8500_ETHER_BASE 0xd8004000 /* 1k Ethernet MAC 0 */
+#define VT8500_CIPHER_BASE 0xd8006000 /* 4k Cipher */
+#define VT8500_USB_BASE 0xd8007800 /* 2k USB OTG */
+# define VT8500_EHCI_BASE 0xd8007900 /* EHCI */
+# define VT8500_UHCI_BASE 0xd8007b01 /* UHCI */
+#define VT8500_PATA_BASE 0xd8008000 /* 512 PATA */
+#define VT8500_PS2_BASE 0xd8008800 /* 1k PS/2 */
+#define VT8500_NAND_BASE 0xd8009000 /* 1k NAND Controller */
+#define VT8500_NOR_BASE 0xd8009400 /* 1k NOR Controller */
+#define VT8500_SDMMC_BASE 0xd800a000 /* 1k SD/MMC Controller */
+#define VT8500_MS_BASE 0xd800b000 /* 1k MS/MSPRO Controller */
+#define VT8500_LCDC_BASE 0xd800e400 /* 1k LCD Controller */
+#define VT8500_VPU_BASE 0xd8050000 /* 256 VPU */
+#define VT8500_GOV_BASE 0xd8050300 /* 256 GOV */
+#define VT8500_GEGEA_BASE 0xd8050400 /* 768 GE/GE Alpha Mixing */
+#define VT8500_LCDF_BASE 0xd8050900 /* 256 LCD Formatter */
+#define VT8500_VID_BASE 0xd8050a00 /* 256 VID */
+#define VT8500_VPP_BASE 0xd8050b00 /* 256 VPP */
+#define VT8500_TSBK_BASE 0xd80f4000 /* 4k TSBK */
+#define VT8500_JPEGDEC_BASE 0xd80fe000 /* 4k JPEG Decoder */
+#define VT8500_JPEGENC_BASE 0xd80ff000 /* 4k JPEG Encoder */
+#define VT8500_RTC_BASE 0xd8100000 /* 64k RTC */
+#define VT8500_GPIO_BASE 0xd8110000 /* 64k GPIO Configuration */
+#define VT8500_SCC_BASE 0xd8120000 /* 64k System Configuration*/
+#define VT8500_PMC_BASE 0xd8130000 /* 64k PMC Configuration */
+#define VT8500_IC_BASE 0xd8140000 /* 64k Interrupt Controller*/
+#define VT8500_UART0_BASE 0xd8200000 /* 64k UART 0 */
+#define VT8500_UART2_BASE 0xd8210000 /* 64k UART 2 */
+#define VT8500_PWM_BASE 0xd8220000 /* 64k PWM Configuration */
+#define VT8500_SPI0_BASE 0xd8240000 /* 64k SPI 0 */
+#define VT8500_SPI1_BASE 0xd8250000 /* 64k SPI 1 */
+#define VT8500_CIR_BASE 0xd8270000 /* 64k CIR */
+#define VT8500_I2C0_BASE 0xd8280000 /* 64k I2C 0 */
+#define VT8500_AC97_BASE 0xd8290000 /* 64k AC97 */
+#define VT8500_SPI2_BASE 0xd82a0000 /* 64k SPI 2 */
+#define VT8500_UART1_BASE 0xd82b0000 /* 64k UART 1 */
+#define VT8500_UART3_BASE 0xd82c0000 /* 64k UART 3 */
+#define VT8500_PCM_BASE 0xd82d0000 /* 64k PCM */
+#define VT8500_I2C1_BASE 0xd8320000 /* 64k I2C 1 */
+#define VT8500_I2S_BASE 0xd8330000 /* 64k I2S */
+#define VT8500_ADC_BASE 0xd8340000 /* 64k ADC */
+
+#define VT8500_REGS_END_PHYS 0xd834ffff /* End of MMIO registers */
+#define VT8500_REGS_LENGTH (VT8500_REGS_END_PHYS \
+ - VT8500_REGS_START_PHYS + 1)
+
+#endif
--- /dev/null
+/*
+ * VT8500/WM8505 Frame Buffer platform data definitions
+ *
+ * Copyright (C) 2010 Ed Spiridonov <edo.rus@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _VT8500FB_H
+#define _VT8500FB_H
+
+#include <linux/fb.h>
+
+struct vt8500fb_platform_data {
+ struct fb_videomode mode;
+ u32 xres_virtual;
+ u32 yres_virtual;
+ u32 bpp;
+ unsigned long video_mem_phys;
+ void *video_mem_virt;
+ unsigned long video_mem_len;
+};
+
+#endif /* _VT8500FB_H */
--- /dev/null
+/*
+ * arch/arm/mach-vt8500/include/mach/wm8505_irqs.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+/* WM8505 Interrupt Sources */
+
+#define IRQ_UHCI 0 /* UHC FS (UHCI?) */
+#define IRQ_EHCI 1 /* UHC HS */
+#define IRQ_UDCDMA 2 /* UDC DMA */
+ /* Reserved */
+#define IRQ_PS2MOUSE 4 /* PS/2 Mouse */
+#define IRQ_UDC 5 /* UDC */
+#define IRQ_EXT0 6 /* External Interrupt 0 */
+#define IRQ_EXT1 7 /* External Interrupt 1 */
+#define IRQ_KEYPAD 8 /* Keypad */
+#define IRQ_DMA 9 /* DMA Controller */
+#define IRQ_ETHER 10 /* Ethernet MAC */
+ /* Reserved */
+ /* Reserved */
+#define IRQ_EXT2 13 /* External Interrupt 2 */
+#define IRQ_EXT3 14 /* External Interrupt 3 */
+#define IRQ_EXT4 15 /* External Interrupt 4 */
+#define IRQ_APB 16 /* APB Bridge */
+#define IRQ_DMA0 17 /* DMA Channel 0 */
+#define IRQ_I2C1 18 /* I2C 1 */
+#define IRQ_I2C0 19 /* I2C 0 */
+#define IRQ_SDMMC 20 /* SD/MMC Controller */
+#define IRQ_SDMMC_DMA 21 /* SD/MMC Controller DMA */
+#define IRQ_PMC_WU 22 /* Power Management Controller Wakeup */
+#define IRQ_PS2KBD 23 /* PS/2 Keyboard */
+#define IRQ_SPI0 24 /* SPI 0 */
+#define IRQ_SPI1 25 /* SPI 1 */
+#define IRQ_SPI2 26 /* SPI 2 */
+#define IRQ_DMA1 27 /* DMA Channel 1 */
+#define IRQ_NAND 28 /* NAND Flash Controller */
+#define IRQ_NAND_DMA 29 /* NAND Flash Controller DMA */
+#define IRQ_UART5 30 /* UART 5 */
+#define IRQ_UART4 31 /* UART 4 */
+#define IRQ_UART0 32 /* UART 0 */
+#define IRQ_UART1 33 /* UART 1 */
+#define IRQ_DMA2 34 /* DMA Channel 2 */
+#define IRQ_I2S 35 /* I2S */
+#define IRQ_PMCOS0 36 /* PMC OS Timer 0 */
+#define IRQ_PMCOS1 37 /* PMC OS Timer 1 */
+#define IRQ_PMCOS2 38 /* PMC OS Timer 2 */
+#define IRQ_PMCOS3 39 /* PMC OS Timer 3 */
+#define IRQ_DMA3 40 /* DMA Channel 3 */
+#define IRQ_DMA4 41 /* DMA Channel 4 */
+#define IRQ_AC97 42 /* AC97 Interface */
+ /* Reserved */
+#define IRQ_NOR 44 /* NOR Flash Controller */
+#define IRQ_DMA5 45 /* DMA Channel 5 */
+#define IRQ_DMA6 46 /* DMA Channel 6 */
+#define IRQ_UART2 47 /* UART 2 */
+#define IRQ_RTC 48 /* RTC Interrupt */
+#define IRQ_RTCSM 49 /* RTC Second/Minute Update Interrupt */
+#define IRQ_UART3 50 /* UART 3 */
+#define IRQ_DMA7 51 /* DMA Channel 7 */
+#define IRQ_EXT5 52 /* External Interrupt 5 */
+#define IRQ_EXT6 53 /* External Interrupt 6 */
+#define IRQ_EXT7 54 /* External Interrupt 7 */
+#define IRQ_CIR 55 /* CIR */
+#define IRQ_SIC0 56 /* SIC IRQ0 */
+#define IRQ_SIC1 57 /* SIC IRQ1 */
+#define IRQ_SIC2 58 /* SIC IRQ2 */
+#define IRQ_SIC3 59 /* SIC IRQ3 */
+#define IRQ_SIC4 60 /* SIC IRQ4 */
+#define IRQ_SIC5 61 /* SIC IRQ5 */
+#define IRQ_SIC6 62 /* SIC IRQ6 */
+#define IRQ_SIC7 63 /* SIC IRQ7 */
+ /* Reserved */
+#define IRQ_JPEGDEC 65 /* JPEG Decoder */
+#define IRQ_SAE 66 /* SAE (?) */
+ /* Reserved */
+#define IRQ_VPU 79 /* Video Processing Unit */
+#define IRQ_VPP 80 /* Video Post-Processor */
+#define IRQ_VID 81 /* Video Digital Input Interface */
+#define IRQ_SPU 82 /* SPU (?) */
+#define IRQ_PIP 83 /* PIP Error */
+#define IRQ_GE 84 /* Graphic Engine */
+#define IRQ_GOV 85 /* Graphic Overlay Engine */
+#define IRQ_DVO 86 /* Digital Video Output */
+ /* Reserved */
+#define IRQ_DMA8 92 /* DMA Channel 8 */
+#define IRQ_DMA9 93 /* DMA Channel 9 */
+#define IRQ_DMA10 94 /* DMA Channel 10 */
+#define IRQ_DMA11 95 /* DMA Channel 11 */
+#define IRQ_DMA12 96 /* DMA Channel 12 */
+#define IRQ_DMA13 97 /* DMA Channel 13 */
+#define IRQ_DMA14 98 /* DMA Channel 14 */
+#define IRQ_DMA15 99 /* DMA Channel 15 */
+ /* Reserved */
+#define IRQ_GOVW 111 /* GOVW (?) */
+#define IRQ_GOVRSDSCD 112 /* GOVR SDSCD (?) */
+#define IRQ_GOVRSDMIF 113 /* GOVR SDMIF (?) */
+#define IRQ_GOVRHDSCD 114 /* GOVR HDSCD (?) */
+#define IRQ_GOVRHDMIF 115 /* GOVR HDMIF (?) */
+
+#define WM8505_NR_IRQS 116
--- /dev/null
+/*
+ * arch/arm/mach-vt8500/include/mach/wm8505_regs.h
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_WM8505_REGS_H
+#define __ASM_ARM_ARCH_WM8505_REGS_H
+
+/* WM8505 Registers Map */
+
+#define WM8505_REGS_START_PHYS 0xd8000000 /* Start of MMIO registers */
+#define WM8505_REGS_START_VIRT 0xf8000000 /* Virtual mapping start */
+
+#define WM8505_DDR_BASE 0xd8000400 /* 1k DDR/DDR2 Memory
+ Controller */
+#define WM8505_DMA_BASE 0xd8001800 /* 1k DMA Controller */
+#define WM8505_VDMA_BASE 0xd8001c00 /* 1k VDMA */
+#define WM8505_SFLASH_BASE 0xd8002000 /* 1k Serial Flash Memory
+ Controller */
+#define WM8505_ETHER_BASE 0xd8004000 /* 1k Ethernet MAC 0 */
+#define WM8505_CIPHER_BASE 0xd8006000 /* 4k Cipher */
+#define WM8505_USB_BASE 0xd8007000 /* 2k USB 2.0 Host */
+# define WM8505_EHCI_BASE 0xd8007100 /* EHCI */
+# define WM8505_UHCI_BASE 0xd8007301 /* UHCI */
+#define WM8505_PS2_BASE 0xd8008800 /* 1k PS/2 */
+#define WM8505_NAND_BASE 0xd8009000 /* 1k NAND Controller */
+#define WM8505_NOR_BASE 0xd8009400 /* 1k NOR Controller */
+#define WM8505_SDMMC_BASE 0xd800a000 /* 1k SD/MMC Controller */
+#define WM8505_VPU_BASE 0xd8050000 /* 256 VPU */
+#define WM8505_GOV_BASE 0xd8050300 /* 256 GOV */
+#define WM8505_GEGEA_BASE 0xd8050400 /* 768 GE/GE Alpha Mixing */
+#define WM8505_GOVR_BASE 0xd8050800 /* 512 GOVR (frambuffer) */
+#define WM8505_VID_BASE 0xd8050a00 /* 256 VID */
+#define WM8505_SCL_BASE 0xd8050d00 /* 256 SCL */
+#define WM8505_VPP_BASE 0xd8050f00 /* 256 VPP */
+#define WM8505_JPEGDEC_BASE 0xd80fe000 /* 4k JPEG Decoder */
+#define WM8505_RTC_BASE 0xd8100000 /* 64k RTC */
+#define WM8505_GPIO_BASE 0xd8110000 /* 64k GPIO Configuration */
+#define WM8505_SCC_BASE 0xd8120000 /* 64k System Configuration*/
+#define WM8505_PMC_BASE 0xd8130000 /* 64k PMC Configuration */
+#define WM8505_IC_BASE 0xd8140000 /* 64k Interrupt Controller*/
+#define WM8505_SIC_BASE 0xd8150000 /* 64k Secondary IC */
+#define WM8505_UART0_BASE 0xd8200000 /* 64k UART 0 */
+#define WM8505_UART2_BASE 0xd8210000 /* 64k UART 2 */
+#define WM8505_PWM_BASE 0xd8220000 /* 64k PWM Configuration */
+#define WM8505_SPI0_BASE 0xd8240000 /* 64k SPI 0 */
+#define WM8505_SPI1_BASE 0xd8250000 /* 64k SPI 1 */
+#define WM8505_KEYPAD_BASE 0xd8260000 /* 64k Keypad control */
+#define WM8505_CIR_BASE 0xd8270000 /* 64k CIR */
+#define WM8505_I2C0_BASE 0xd8280000 /* 64k I2C 0 */
+#define WM8505_AC97_BASE 0xd8290000 /* 64k AC97 */
+#define WM8505_SPI2_BASE 0xd82a0000 /* 64k SPI 2 */
+#define WM8505_UART1_BASE 0xd82b0000 /* 64k UART 1 */
+#define WM8505_UART3_BASE 0xd82c0000 /* 64k UART 3 */
+#define WM8505_I2C1_BASE 0xd8320000 /* 64k I2C 1 */
+#define WM8505_I2S_BASE 0xd8330000 /* 64k I2S */
+#define WM8505_UART4_BASE 0xd8370000 /* 64k UART 4 */
+#define WM8505_UART5_BASE 0xd8380000 /* 64k UART 5 */
+
+#define WM8505_REGS_END_PHYS 0xd838ffff /* End of MMIO registers */
+#define WM8505_REGS_LENGTH (WM8505_REGS_END_PHYS \
+ - WM8505_REGS_START_PHYS + 1)
+
+#endif
--- /dev/null
+/*
+ * arch/arm/mach-vt8500/irq.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/irq.h>
+
+#include "devices.h"
+
+#define VT8500_IC_DCTR 0x40 /* Destination control
+ register, 64*u8 */
+#define VT8500_INT_ENABLE (1 << 3)
+#define VT8500_TRIGGER_HIGH (0 << 4)
+#define VT8500_TRIGGER_RISING (1 << 4)
+#define VT8500_TRIGGER_FALLING (2 << 4)
+#define VT8500_EDGE ( VT8500_TRIGGER_RISING \
+ | VT8500_TRIGGER_FALLING)
+#define VT8500_IC_STATUS 0x80 /* Interrupt status, 2*u32 */
+
+static void __iomem *ic_regbase;
+static void __iomem *sic_regbase;
+
+static void vt8500_irq_mask(unsigned int irq)
+{
+ void __iomem *base = ic_regbase;
+ u8 edge;
+
+ if (irq >= 64) {
+ base = sic_regbase;
+ irq -= 64;
+ }
+ edge = readb(base + VT8500_IC_DCTR + irq) & VT8500_EDGE;
+ if (edge) {
+ void __iomem *stat_reg = base + VT8500_IC_STATUS
+ + (irq < 32 ? 0 : 4);
+ unsigned status = readl(stat_reg);
+
+ status |= (1 << (irq & 0x1f));
+ writel(status, stat_reg);
+ } else {
+ u8 dctr = readb(base + VT8500_IC_DCTR + irq);
+
+ dctr &= ~VT8500_INT_ENABLE;
+ writeb(dctr, base + VT8500_IC_DCTR + irq);
+ }
+}
+
+static void vt8500_irq_unmask(unsigned int irq)
+{
+ void __iomem *base = ic_regbase;
+ u8 dctr;
+
+ if (irq >= 64) {
+ base = sic_regbase;
+ irq -= 64;
+ }
+ dctr = readb(base + VT8500_IC_DCTR + irq);
+ dctr |= VT8500_INT_ENABLE;
+ writeb(dctr, base + VT8500_IC_DCTR + irq);
+}
+
+static int vt8500_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+ void __iomem *base = ic_regbase;
+ unsigned int orig_irq = irq;
+ u8 dctr;
+
+ if (irq >= 64) {
+ base = sic_regbase;
+ irq -= 64;
+ }
+
+ dctr = readb(base + VT8500_IC_DCTR + irq);
+ dctr &= ~VT8500_EDGE;
+
+ switch (flow_type) {
+ case IRQF_TRIGGER_LOW:
+ return -EINVAL;
+ case IRQF_TRIGGER_HIGH:
+ dctr |= VT8500_TRIGGER_HIGH;
+ irq_desc[orig_irq].handle_irq = handle_level_irq;
+ break;
+ case IRQF_TRIGGER_FALLING:
+ dctr |= VT8500_TRIGGER_FALLING;
+ irq_desc[orig_irq].handle_irq = handle_edge_irq;
+ break;
+ case IRQF_TRIGGER_RISING:
+ dctr |= VT8500_TRIGGER_RISING;
+ irq_desc[orig_irq].handle_irq = handle_edge_irq;
+ break;
+ }
+ writeb(dctr, base + VT8500_IC_DCTR + irq);
+
+ return 0;
+}
+
+static struct irq_chip vt8500_irq_chip = {
+ .name = "vt8500",
+ .ack = vt8500_irq_mask,
+ .mask = vt8500_irq_mask,
+ .unmask = vt8500_irq_unmask,
+ .set_type = vt8500_irq_set_type,
+};
+
+void __init vt8500_init_irq(void)
+{
+ unsigned int i;
+
+ ic_regbase = ioremap(wmt_ic_base, SZ_64K);
+
+ if (ic_regbase) {
+ /* Enable rotating priority for IRQ */
+ writel((1 << 6), ic_regbase + 0x20);
+ writel(0, ic_regbase + 0x24);
+
+ for (i = 0; i < wmt_nr_irqs; i++) {
+ /* Disable all interrupts and route them to IRQ */
+ writeb(0x00, ic_regbase + VT8500_IC_DCTR + i);
+
+ set_irq_chip(i, &vt8500_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+ } else {
+ printk(KERN_ERR "Unable to remap the Interrupt Controller registers, not enabling IRQs!\n");
+ }
+}
+
+void __init wm8505_init_irq(void)
+{
+ unsigned int i;
+
+ ic_regbase = ioremap(wmt_ic_base, SZ_64K);
+ sic_regbase = ioremap(wmt_sic_base, SZ_64K);
+
+ if (ic_regbase && sic_regbase) {
+ /* Enable rotating priority for IRQ */
+ writel((1 << 6), ic_regbase + 0x20);
+ writel(0, ic_regbase + 0x24);
+ writel((1 << 6), sic_regbase + 0x20);
+ writel(0, sic_regbase + 0x24);
+
+ for (i = 0; i < wmt_nr_irqs; i++) {
+ /* Disable all interrupts and route them to IRQ */
+ if (i < 64)
+ writeb(0x00, ic_regbase + VT8500_IC_DCTR + i);
+ else
+ writeb(0x00, sic_regbase + VT8500_IC_DCTR
+ + i - 64);
+
+ set_irq_chip(i, &vt8500_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+ } else {
+ printk(KERN_ERR "Unable to remap the Interrupt Controller registers, not enabling IRQs!\n");
+ }
+}
--- /dev/null
+/*
+ * arch/arm/mach-vt8500/pwm.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+#include <linux/delay.h>
+
+#include <asm/div64.h>
+
+#define VT8500_NR_PWMS 4
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device {
+ struct list_head node;
+ struct platform_device *pdev;
+
+ const char *label;
+
+ void __iomem *regbase;
+
+ unsigned int use_count;
+ unsigned int pwm_id;
+};
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+static inline void pwm_busy_wait(void __iomem *reg, u8 bitmask)
+{
+ int loops = msecs_to_loops(10);
+ while ((readb(reg) & bitmask) && --loops)
+ cpu_relax();
+
+ if (unlikely(!loops))
+ pr_warning("Waiting for status bits 0x%x to clear timed out\n",
+ bitmask);
+}
+
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+ unsigned long long c;
+ unsigned long period_cycles, prescale, pv, dc;
+
+ if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
+ return -EINVAL;
+
+ c = 25000000/2; /* wild guess --- need to implement clocks */
+ c = c * period_ns;
+ do_div(c, 1000000000);
+ period_cycles = c;
+
+ if (period_cycles < 1)
+ period_cycles = 1;
+ prescale = (period_cycles - 1) / 4096;
+ pv = period_cycles / (prescale + 1) - 1;
+ if (pv > 4095)
+ pv = 4095;
+
+ if (prescale > 1023)
+ return -EINVAL;
+
+ c = (unsigned long long)pv * duty_ns;
+ do_div(c, period_ns);
+ dc = c;
+
+ pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 1));
+ writel(prescale, pwm->regbase + 0x4 + (pwm->pwm_id << 4));
+
+ pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 2));
+ writel(pv, pwm->regbase + 0x8 + (pwm->pwm_id << 4));
+
+ pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 3));
+ writel(dc, pwm->regbase + 0xc + (pwm->pwm_id << 4));
+
+ return 0;
+}
+EXPORT_SYMBOL(pwm_config);
+
+int pwm_enable(struct pwm_device *pwm)
+{
+ pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 0));
+ writel(5, pwm->regbase + (pwm->pwm_id << 4));
+ return 0;
+}
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+ pwm_busy_wait(pwm->regbase + 0x40 + pwm->pwm_id, (1 << 0));
+ writel(0, pwm->regbase + (pwm->pwm_id << 4));
+}
+EXPORT_SYMBOL(pwm_disable);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+ struct pwm_device *pwm;
+ int found = 0;
+
+ mutex_lock(&pwm_lock);
+
+ list_for_each_entry(pwm, &pwm_list, node) {
+ if (pwm->pwm_id == pwm_id) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (found) {
+ if (pwm->use_count == 0) {
+ pwm->use_count++;
+ pwm->label = label;
+ } else {
+ pwm = ERR_PTR(-EBUSY);
+ }
+ } else {
+ pwm = ERR_PTR(-ENOENT);
+ }
+
+ mutex_unlock(&pwm_lock);
+ return pwm;
+}
+EXPORT_SYMBOL(pwm_request);
+
+void pwm_free(struct pwm_device *pwm)
+{
+ mutex_lock(&pwm_lock);
+
+ if (pwm->use_count) {
+ pwm->use_count--;
+ pwm->label = NULL;
+ } else {
+ pr_warning("PWM device already freed\n");
+ }
+
+ mutex_unlock(&pwm_lock);
+}
+EXPORT_SYMBOL(pwm_free);
+
+static inline void __add_pwm(struct pwm_device *pwm)
+{
+ mutex_lock(&pwm_lock);
+ list_add_tail(&pwm->node, &pwm_list);
+ mutex_unlock(&pwm_lock);
+}
+
+static int __devinit pwm_probe(struct platform_device *pdev)
+{
+ struct pwm_device *pwms;
+ struct resource *r;
+ int ret = 0;
+ int i;
+
+ pwms = kzalloc(sizeof(struct pwm_device) * VT8500_NR_PWMS, GFP_KERNEL);
+ if (pwms == NULL) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < VT8500_NR_PWMS; i++) {
+ pwms[i].use_count = 0;
+ pwms[i].pwm_id = i;
+ pwms[i].pdev = pdev;
+ }
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "no memory resource defined\n");
+ ret = -ENODEV;
+ goto err_free;
+ }
+
+ r = request_mem_region(r->start, resource_size(r), pdev->name);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "failed to request memory resource\n");
+ ret = -EBUSY;
+ goto err_free;
+ }
+
+ pwms[0].regbase = ioremap(r->start, resource_size(r));
+ if (pwms[0].regbase == NULL) {
+ dev_err(&pdev->dev, "failed to ioremap() registers\n");
+ ret = -ENODEV;
+ goto err_free_mem;
+ }
+
+ for (i = 1; i < VT8500_NR_PWMS; i++)
+ pwms[i].regbase = pwms[0].regbase;
+
+ for (i = 0; i < VT8500_NR_PWMS; i++)
+ __add_pwm(&pwms[i]);
+
+ platform_set_drvdata(pdev, pwms);
+ return 0;
+
+err_free_mem:
+ release_mem_region(r->start, resource_size(r));
+err_free:
+ kfree(pwms);
+ return ret;
+}
+
+static int __devexit pwm_remove(struct platform_device *pdev)
+{
+ struct pwm_device *pwms;
+ struct resource *r;
+ int i;
+
+ pwms = platform_get_drvdata(pdev);
+ if (pwms == NULL)
+ return -ENODEV;
+
+ mutex_lock(&pwm_lock);
+
+ for (i = 0; i < VT8500_NR_PWMS; i++)
+ list_del(&pwms[i].node);
+ mutex_unlock(&pwm_lock);
+
+ iounmap(pwms[0].regbase);
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(r->start, resource_size(r));
+
+ kfree(pwms);
+ return 0;
+}
+
+static struct platform_driver pwm_driver = {
+ .driver = {
+ .name = "vt8500-pwm",
+ .owner = THIS_MODULE,
+ },
+ .probe = pwm_probe,
+ .remove = __devexit_p(pwm_remove),
+};
+
+static int __init pwm_init(void)
+{
+ return platform_driver_register(&pwm_driver);
+}
+arch_initcall(pwm_init);
+
+static void __exit pwm_exit(void)
+{
+ platform_driver_unregister(&pwm_driver);
+}
+module_exit(pwm_exit);
+
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * arch/arm/mach-vt8500/timer.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/delay.h>
+
+#include <asm/mach/time.h>
+
+#include "devices.h"
+
+#define VT8500_TIMER_OFFSET 0x0100
+#define TIMER_MATCH_VAL 0x0000
+#define TIMER_COUNT_VAL 0x0010
+#define TIMER_STATUS_VAL 0x0014
+#define TIMER_IER_VAL 0x001c /* interrupt enable */
+#define TIMER_CTRL_VAL 0x0020
+#define TIMER_AS_VAL 0x0024 /* access status */
+#define TIMER_COUNT_R_ACTIVE (1 << 5) /* not ready for read */
+#define TIMER_COUNT_W_ACTIVE (1 << 4) /* not ready for write */
+#define TIMER_MATCH_W_ACTIVE (1 << 0) /* not ready for write */
+#define VT8500_TIMER_HZ 3000000
+
+#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+
+static void __iomem *regbase;
+
+static cycle_t vt8500_timer_read(struct clocksource *cs)
+{
+ int loops = msecs_to_loops(10);
+ writel(3, regbase + TIMER_CTRL_VAL);
+ while ((readl((regbase + TIMER_AS_VAL)) & TIMER_COUNT_R_ACTIVE)
+ && --loops)
+ cpu_relax();
+ return readl(regbase + TIMER_COUNT_VAL);
+}
+
+struct clocksource clocksource = {
+ .name = "vt8500_timer",
+ .rating = 200,
+ .read = vt8500_timer_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int vt8500_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ int loops = msecs_to_loops(10);
+ cycle_t alarm = clocksource.read(&clocksource) + cycles;
+ while ((readl(regbase + TIMER_AS_VAL) & TIMER_MATCH_W_ACTIVE)
+ && --loops)
+ cpu_relax();
+ writel((unsigned long)alarm, regbase + TIMER_MATCH_VAL);
+
+ if ((signed)(alarm - clocksource.read(&clocksource)) <= 16)
+ return -ETIME;
+
+ writel(1, regbase + TIMER_IER_VAL);
+
+ return 0;
+}
+
+static void vt8500_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_PERIODIC:
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ writel(readl(regbase + TIMER_CTRL_VAL) | 1,
+ regbase + TIMER_CTRL_VAL);
+ writel(0, regbase + TIMER_IER_VAL);
+ break;
+ }
+}
+
+struct clock_event_device clockevent = {
+ .name = "vt8500_timer",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 200,
+ .set_next_event = vt8500_timer_set_next_event,
+ .set_mode = vt8500_timer_set_mode,
+};
+
+static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+ writel(0xf, regbase + TIMER_STATUS_VAL);
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+struct irqaction irq = {
+ .name = "vt8500_timer",
+ .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = vt8500_timer_interrupt,
+ .dev_id = &clockevent,
+};
+
+static void __init vt8500_timer_init(void)
+{
+ regbase = ioremap(wmt_pmc_base + VT8500_TIMER_OFFSET, 0x28);
+ if (!regbase)
+ printk(KERN_ERR "vt8500_timer_init: failed to map MMIO registers\n");
+
+ writel(1, regbase + TIMER_CTRL_VAL);
+ writel(0xf, regbase + TIMER_STATUS_VAL);
+ writel(~0, regbase + TIMER_MATCH_VAL);
+
+ if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ))
+ printk(KERN_ERR "vt8500_timer_init: clocksource_register failed for %s\n",
+ clocksource.name);
+
+ clockevents_calc_mult_shift(&clockevent, VT8500_TIMER_HZ, 4);
+
+ /* copy-pasted from mach-msm; no idea */
+ clockevent.max_delta_ns =
+ clockevent_delta2ns(0xf0000000, &clockevent);
+ clockevent.min_delta_ns = clockevent_delta2ns(4, &clockevent);
+ clockevent.cpumask = cpumask_of(0);
+
+ if (setup_irq(wmt_timer_irq, &irq))
+ printk(KERN_ERR "vt8500_timer_init: setup_irq failed for %s\n",
+ clockevent.name);
+ clockevents_register_device(&clockevent);
+}
+
+struct sys_timer vt8500_timer = {
+ .init = vt8500_timer_init
+};
--- /dev/null
+/*
+ * arch/arm/mach-vt8500/wm8505_7in.c
+ *
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/io.h>
+#include <linux/pm.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "devices.h"
+
+static void __iomem *pmc_hiber;
+
+static struct platform_device *devices[] __initdata = {
+ &vt8500_device_uart0,
+ &vt8500_device_ehci,
+ &vt8500_device_wm8505_fb,
+ &vt8500_device_ge_rops,
+ &vt8500_device_pwm,
+ &vt8500_device_pwmbl,
+ &vt8500_device_rtc,
+};
+
+static void vt8500_power_off(void)
+{
+ local_irq_disable();
+ writew(5, pmc_hiber);
+ asm("mcr%? p15, 0, %0, c7, c0, 4" : : "r" (0));
+}
+
+void __init wm8505_7in_init(void)
+{
+#ifdef CONFIG_FB_WM8505
+ void __iomem *gpio_mux_reg = ioremap(wmt_gpio_base + 0x200, 4);
+ if (gpio_mux_reg) {
+ writel(readl(gpio_mux_reg) | 0x80000000, gpio_mux_reg);
+ iounmap(gpio_mux_reg);
+ } else {
+ printk(KERN_ERR "Could not remap the GPIO mux register, display may not work properly!\n");
+ }
+#endif
+ pmc_hiber = ioremap(wmt_pmc_base + 0x12, 2);
+ if (pmc_hiber)
+ pm_power_off = &vt8500_power_off;
+ else
+ printk(KERN_ERR "PMC Hibernation register could not be remapped, not enabling power off!\n");
+
+ wm8505_set_resources();
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+ vt8500_gpio_init();
+}
+
+MACHINE_START(WM8505_7IN_NETBOOK, "WM8505 7-inch generic netbook")
+ .boot_params = 0x00000100,
+ .reserve = wm8505_reserve_mem,
+ .map_io = wm8505_map_io,
+ .init_irq = wm8505_init_irq,
+ .timer = &vt8500_timer,
+ .init_machine = wm8505_7in_init,
+MACHINE_END
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
# ARMv6
config CPU_V6
- bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE
+ bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
select CPU_32v6
select CPU_ABRT_EV6
select CPU_PABRT_V6
select CPU_TLB_V6 if MMU
# ARMv6k
-config CPU_32v6K
- bool "Support ARM V6K processor extensions" if !SMP
- depends on CPU_V6 || CPU_V7
- default y if SMP
- help
- Say Y here if your ARMv6 processor supports the 'K' extension.
- This enables the kernel to use some instructions not present
- on previous processors, and as such a kernel build with this
- enabled will not boot on processors with do not support these
- instructions.
+config CPU_V6K
+ bool "Support ARM V6K processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
+ select CPU_32v6
+ select CPU_32v6K
+ select CPU_ABRT_EV6
+ select CPU_PABRT_V6
+ select CPU_CACHE_V6
+ select CPU_CACHE_VIPT
+ select CPU_CP15_MMU
+ select CPU_HAS_ASID if MMU
+ select CPU_COPY_V6 if MMU
+ select CPU_TLB_V6 if MMU
# ARMv7
config CPU_V7
bool
select TLS_REG_EMUL if SMP || !MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+ select CPU_USE_DOMAINS if MMU
config CPU_32v4
bool
select TLS_REG_EMUL if SMP || !MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+ select CPU_USE_DOMAINS if MMU
config CPU_32v4T
bool
select TLS_REG_EMUL if SMP || !MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+ select CPU_USE_DOMAINS if MMU
config CPU_32v5
bool
select TLS_REG_EMUL if SMP || !MMU
select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+ select CPU_USE_DOMAINS if MMU
config CPU_32v6
bool
select TLS_REG_EMUL if !CPU_32v6K && !MMU
+ select CPU_USE_DOMAINS if CPU_V6 && MMU
+
+config CPU_32v6K
+ bool
config CPU_32v7
bool
config CPU_USE_DOMAINS
bool
- depends on MMU
- default y if !CPU_32v6K
help
This option enables or disables the use of domain switching
via the set_fs() function.
config ARM_THUMB
bool "Support Thumb user binaries"
- depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V7 || CPU_FEROCEON
+ depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V6K || CPU_V7 || CPU_FEROCEON
default y
help
Say Y if you want to include kernel support for running user space
config SWP_EMULATE
bool "Emulate SWP/SWPB instructions"
- depends on !CPU_USE_DOMAINS && CPU_V7 && !CPU_V6
+ depends on !CPU_USE_DOMAINS && CPU_V7
select HAVE_PROC_CPU if PROC_FS
default y if SMP
help
config CPU_ENDIAN_BE8
bool
depends on CPU_BIG_ENDIAN
- default CPU_V6 || CPU_V7
+ default CPU_V6 || CPU_V6K || CPU_V7
help
Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors.
config CPU_BPREDICT_DISABLE
bool "Disable branch prediction"
- depends on CPU_ARM1020 || CPU_V6 || CPU_MOHAWK || CPU_XSC3 || CPU_V7 || CPU_FA526
+ depends on CPU_ARM1020 || CPU_V6 || CPU_V6K || CPU_MOHAWK || CPU_XSC3 || CPU_V7 || CPU_FA526
help
Say Y here to disable branch prediction. If unsure, say N.
config DMA_CACHE_RWFO
bool "Enable read/write for ownership DMA cache maintenance"
- depends on CPU_V6 && SMP
+ depends on CPU_V6K && SMP
default y
help
The Snoop Control Unit on ARM11MPCore does not detect the
config CACHE_PL310
bool
depends on CACHE_L2X0
- default y if CPU_V7 && !CPU_V6
+ default y if CPU_V7 && !(CPU_V6 || CPU_V6K)
help
This option enables optimisations for the PL310 cache
controller.
help
This option enables the L2 cache on XScale3.
+config ARM_L1_CACHE_SHIFT_6
+ bool
+ help
+ Setting ARM L1 cache line size to 64 Bytes.
+
config ARM_L1_CACHE_SHIFT
int
default 6 if ARM_L1_CACHE_SHIFT_6
default 5
config ARM_DMA_MEM_BUFFERABLE
- bool "Use non-cacheable memory for DMA" if CPU_V6 && !CPU_V7
+ bool "Use non-cacheable memory for DMA" if (CPU_V6 || CPU_V6K) && !CPU_V7
depends on !(MACH_REALVIEW_PB1176 || REALVIEW_EB_ARM11MP || \
MACH_REALVIEW_PB11MP)
- default y if CPU_V6 || CPU_V7
+ default y if CPU_V6 || CPU_V6K || CPU_V7
help
Historically, the kernel has used strongly ordered mappings to
provide DMA coherent memory. With the advent of ARMv7, mapping
obj-$(CONFIG_CPU_MOHAWK) += proc-mohawk.o
obj-$(CONFIG_CPU_FEROCEON) += proc-feroceon.o
obj-$(CONFIG_CPU_V6) += proc-v6.o
+obj-$(CONFIG_CPU_V6K) += proc-v6.o
obj-$(CONFIG_CPU_V7) += proc-v7.o
AFLAGS_proc-v6.o :=-Wa,-march=armv6
*/
.align 5
ENTRY(v6_early_abort)
-#ifdef CONFIG_CPU_32v6K
- clrex
-#else
+#ifdef CONFIG_CPU_V6
sub r1, sp, #4 @ Get unused stack location
strex r0, r1, [r1] @ Clear the exclusive monitor
+#elif defined(CONFIG_CPU_32v6K)
+ clrex
#endif
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
writel_relaxed(addr, base + L2X0_INV_LINE_PA);
}
-#ifdef CONFIG_PL310_ERRATA_588369
-static void debug_writel(unsigned long val)
-{
- extern void omap_smc1(u32 fn, u32 arg);
+#if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915)
- /*
- * Texas Instrument secure monitor api to modify the
- * PL310 Debug Control Register.
- */
- omap_smc1(0x100, val);
+#define debug_writel(val) outer_cache.set_debug(val)
+
+static void l2x0_set_debug(unsigned long val)
+{
+ writel_relaxed(val, l2x0_base + L2X0_DEBUG_CTRL);
}
+#else
+/* Optimised out for non-errata case */
+static inline void debug_writel(unsigned long val)
+{
+}
+
+#define l2x0_set_debug NULL
+#endif
+#ifdef CONFIG_PL310_ERRATA_588369
static inline void l2x0_flush_line(unsigned long addr)
{
void __iomem *base = l2x0_base;
}
#else
-/* Optimised out for non-errata case */
-static inline void debug_writel(unsigned long val)
-{
-}
-
static inline void l2x0_flush_line(unsigned long addr)
{
void __iomem *base = l2x0_base;
/* clean all ways */
spin_lock_irqsave(&l2x0_lock, flags);
+ debug_writel(0x03);
writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_CLEAN_INV_WAY);
cache_wait_way(l2x0_base + L2X0_CLEAN_INV_WAY, l2x0_way_mask);
cache_sync();
+ debug_writel(0x00);
spin_unlock_irqrestore(&l2x0_lock, flags);
}
outer_cache.flush_all = l2x0_flush_all;
outer_cache.inv_all = l2x0_inv_all;
outer_cache.disable = l2x0_disable;
+ outer_cache.set_debug = l2x0_set_debug;
printk(KERN_INFO "%s cache controller enabled\n", type);
printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n",
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
unsigned long start_addr;
-#ifdef CONFIG_CPU_V6
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K)
unsigned int cache_type;
int do_align = 0, aliasing = 0;
* rather difficult.
*/
reason = "with VIPT aliasing cache";
- } else if (is_smp() && tlb_ops_need_broadcast()) {
- /*
- * kmap_high needs to occasionally flush TLB entries,
- * however, if the TLB entries need to be broadcast
- * we may deadlock:
- * kmap_high(irqs off)->flush_all_zero_pkmaps->
- * flush_tlb_kernel_range->smp_call_function_many
- * (must not be called with irqs off)
- */
- reason = "without hardware TLB ops broadcasting";
}
if (reason) {
printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n",
.word cpu_arm1020_dcache_clean_area
.word cpu_arm1020_switch_mm
.word cpu_arm1020_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm1020_processor_functions, . - arm1020_processor_functions
.section ".rodata"
.word cpu_arm1020e_dcache_clean_area
.word cpu_arm1020e_switch_mm
.word cpu_arm1020e_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm1020e_processor_functions, . - arm1020e_processor_functions
.section ".rodata"
.word cpu_arm1022_dcache_clean_area
.word cpu_arm1022_switch_mm
.word cpu_arm1022_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm1022_processor_functions, . - arm1022_processor_functions
.section ".rodata"
.word cpu_arm1026_dcache_clean_area
.word cpu_arm1026_switch_mm
.word cpu_arm1026_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm1026_processor_functions, . - arm1026_processor_functions
.section .rodata
.word cpu_arm6_dcache_clean_area
.word cpu_arm6_switch_mm
.word cpu_arm6_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm6_processor_functions, . - arm6_processor_functions
/*
.word cpu_arm7_dcache_clean_area
.word cpu_arm7_switch_mm
.word cpu_arm7_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm7_processor_functions, . - arm7_processor_functions
.section ".rodata"
.word cpu_arm720_dcache_clean_area
.word cpu_arm720_switch_mm
.word cpu_arm720_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm720_processor_functions, . - arm720_processor_functions
.section ".rodata"
.word cpu_arm740_dcache_clean_area
.word cpu_arm740_switch_mm
.word 0 @ cpu_*_set_pte
+ .word 0
+ .word 0
+ .word 0
.size arm740_processor_functions, . - arm740_processor_functions
.section ".rodata"
.word cpu_arm7tdmi_dcache_clean_area
.word cpu_arm7tdmi_switch_mm
.word 0 @ cpu_*_set_pte
+ .word 0
+ .word 0
+ .word 0
.size arm7tdmi_processor_functions, . - arm7tdmi_processor_functions
.section ".rodata"
#endif
mov pc, lr
+/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
+.globl cpu_arm920_suspend_size
+.equ cpu_arm920_suspend_size, 4 * 3
+#ifdef CONFIG_PM
+ENTRY(cpu_arm920_do_suspend)
+ stmfd sp!, {r4 - r7, lr}
+ mrc p15, 0, r4, c13, c0, 0 @ PID
+ mrc p15, 0, r5, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r6, c2, c0, 0 @ TTB address
+ mrc p15, 0, r7, c1, c0, 0 @ Control register
+ stmia r0, {r4 - r7}
+ ldmfd sp!, {r4 - r7, pc}
+ENDPROC(cpu_arm920_do_suspend)
+
+ENTRY(cpu_arm920_do_resume)
+ mov ip, #0
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
+ ldmia r0, {r4 - r7}
+ mcr p15, 0, r4, c13, c0, 0 @ PID
+ mcr p15, 0, r5, c3, c0, 0 @ Domain ID
+ mcr p15, 0, r6, c2, c0, 0 @ TTB address
+ mov r0, r7 @ control register
+ mov r2, r6, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE
+ b cpu_resume_mmu
+ENDPROC(cpu_arm920_do_resume)
+#else
+#define cpu_arm920_do_suspend 0
+#define cpu_arm920_do_resume 0
+#endif
+
__CPUINIT
.type __arm920_setup, #function
.word cpu_arm920_dcache_clean_area
.word cpu_arm920_switch_mm
.word cpu_arm920_set_pte_ext
+ .word cpu_arm920_suspend_size
+ .word cpu_arm920_do_suspend
+ .word cpu_arm920_do_resume
.size arm920_processor_functions, . - arm920_processor_functions
.section ".rodata"
.word cpu_arm922_dcache_clean_area
.word cpu_arm922_switch_mm
.word cpu_arm922_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm922_processor_functions, . - arm922_processor_functions
.section ".rodata"
.word cpu_arm925_dcache_clean_area
.word cpu_arm925_switch_mm
.word cpu_arm925_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size arm925_processor_functions, . - arm925_processor_functions
.section ".rodata"
#endif
mov pc, lr
+/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
+.globl cpu_arm926_suspend_size
+.equ cpu_arm926_suspend_size, 4 * 3
+#ifdef CONFIG_PM
+ENTRY(cpu_arm926_do_suspend)
+ stmfd sp!, {r4 - r7, lr}
+ mrc p15, 0, r4, c13, c0, 0 @ PID
+ mrc p15, 0, r5, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r6, c2, c0, 0 @ TTB address
+ mrc p15, 0, r7, c1, c0, 0 @ Control register
+ stmia r0, {r4 - r7}
+ ldmfd sp!, {r4 - r7, pc}
+ENDPROC(cpu_arm926_do_suspend)
+
+ENTRY(cpu_arm926_do_resume)
+ mov ip, #0
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
+ ldmia r0, {r4 - r7}
+ mcr p15, 0, r4, c13, c0, 0 @ PID
+ mcr p15, 0, r5, c3, c0, 0 @ Domain ID
+ mcr p15, 0, r6, c2, c0, 0 @ TTB address
+ mov r0, r7 @ control register
+ mov r2, r6, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE
+ b cpu_resume_mmu
+ENDPROC(cpu_arm926_do_resume)
+#else
+#define cpu_arm926_do_suspend 0
+#define cpu_arm926_do_resume 0
+#endif
+
__CPUINIT
.type __arm926_setup, #function
.word cpu_arm926_dcache_clean_area
.word cpu_arm926_switch_mm
.word cpu_arm926_set_pte_ext
+ .word cpu_arm926_suspend_size
+ .word cpu_arm926_do_suspend
+ .word cpu_arm926_do_resume
.size arm926_processor_functions, . - arm926_processor_functions
.section ".rodata"
.word cpu_arm940_dcache_clean_area
.word cpu_arm940_switch_mm
.word 0 @ cpu_*_set_pte
+ .word 0
+ .word 0
+ .word 0
.size arm940_processor_functions, . - arm940_processor_functions
.section ".rodata"
.word cpu_arm946_dcache_clean_area
.word cpu_arm946_switch_mm
.word 0 @ cpu_*_set_pte
+ .word 0
+ .word 0
+ .word 0
.size arm946_processor_functions, . - arm946_processor_functions
.section ".rodata"
.word cpu_arm9tdmi_dcache_clean_area
.word cpu_arm9tdmi_switch_mm
.word 0 @ cpu_*_set_pte
+ .word 0
+ .word 0
+ .word 0
.size arm9tdmi_processor_functions, . - arm9tdmi_processor_functions
.section ".rodata"
.word cpu_fa526_dcache_clean_area
.word cpu_fa526_switch_mm
.word cpu_fa526_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size fa526_processor_functions, . - fa526_processor_functions
.section ".rodata"
.word cpu_feroceon_dcache_clean_area
.word cpu_feroceon_switch_mm
.word cpu_feroceon_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size feroceon_processor_functions, . - feroceon_processor_functions
.section ".rodata"
.word cpu_mohawk_dcache_clean_area
.word cpu_mohawk_switch_mm
.word cpu_mohawk_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size mohawk_processor_functions, . - mohawk_processor_functions
.section ".rodata"
.word cpu_sa110_dcache_clean_area
.word cpu_sa110_switch_mm
.word cpu_sa110_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size sa110_processor_functions, . - sa110_processor_functions
.section ".rodata"
#endif
mov pc, lr
+.globl cpu_sa1100_suspend_size
+.equ cpu_sa1100_suspend_size, 4*4
+#ifdef CONFIG_PM
+ENTRY(cpu_sa1100_do_suspend)
+ stmfd sp!, {r4 - r7, lr}
+ mrc p15, 0, r4, c3, c0, 0 @ domain ID
+ mrc p15, 0, r5, c2, c0, 0 @ translation table base addr
+ mrc p15, 0, r6, c13, c0, 0 @ PID
+ mrc p15, 0, r7, c1, c0, 0 @ control reg
+ stmia r0, {r4 - r7} @ store cp regs
+ ldmfd sp!, {r4 - r7, pc}
+ENDPROC(cpu_sa1100_do_suspend)
+
+ENTRY(cpu_sa1100_do_resume)
+ ldmia r0, {r4 - r7} @ load cp regs
+ mov r1, #0
+ mcr p15, 0, r1, c8, c7, 0 @ flush I+D TLBs
+ mcr p15, 0, r1, c7, c7, 0 @ flush I&D cache
+ mcr p15, 0, r1, c9, c0, 0 @ invalidate RB
+ mcr p15, 0, r1, c9, c0, 5 @ allow user space to use RB
+
+ mcr p15, 0, r4, c3, c0, 0 @ domain ID
+ mcr p15, 0, r5, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r6, c13, c0, 0 @ PID
+ mov r0, r7 @ control register
+ mov r2, r5, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE
+ b cpu_resume_mmu
+ENDPROC(cpu_sa1100_do_resume)
+#else
+#define cpu_sa1100_do_suspend 0
+#define cpu_sa1100_do_resume 0
+#endif
+
__CPUINIT
.type __sa1100_setup, #function
.word cpu_sa1100_dcache_clean_area
.word cpu_sa1100_switch_mm
.word cpu_sa1100_set_pte_ext
+ .word cpu_sa1100_suspend_size
+ .word cpu_sa1100_do_suspend
+ .word cpu_sa1100_do_resume
.size sa1100_processor_functions, . - sa1100_processor_functions
.section ".rodata"
#endif
mov pc, lr
+/* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */
+.globl cpu_v6_suspend_size
+.equ cpu_v6_suspend_size, 4 * 8
+#ifdef CONFIG_PM
+ENTRY(cpu_v6_do_suspend)
+ stmfd sp!, {r4 - r11, lr}
+ mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mrc p15, 0, r5, c13, c0, 1 @ Context ID
+ mrc p15, 0, r6, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r7, c2, c0, 0 @ Translation table base 0
+ mrc p15, 0, r8, c2, c0, 1 @ Translation table base 1
+ mrc p15, 0, r9, c1, c0, 1 @ auxillary control register
+ mrc p15, 0, r10, c1, c0, 2 @ co-processor access control
+ mrc p15, 0, r11, c1, c0, 0 @ control register
+ stmia r0, {r4 - r11}
+ ldmfd sp!, {r4- r11, pc}
+ENDPROC(cpu_v6_do_suspend)
+
+ENTRY(cpu_v6_do_resume)
+ mov ip, #0
+ mcr p15, 0, ip, c7, c14, 0 @ clean+invalidate D cache
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, ip, c7, c15, 0 @ clean+invalidate cache
+ mcr p15, 0, ip, c7, c10, 4 @ drain write buffer
+ ldmia r0, {r4 - r11}
+ mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mcr p15, 0, r5, c13, c0, 1 @ Context ID
+ mcr p15, 0, r6, c3, c0, 0 @ Domain ID
+ mcr p15, 0, r7, c2, c0, 0 @ Translation table base 0
+ mcr p15, 0, r8, c2, c0, 1 @ Translation table base 1
+ mcr p15, 0, r9, c1, c0, 1 @ auxillary control register
+ mcr p15, 0, r10, c1, c0, 2 @ co-processor access control
+ mcr p15, 0, ip, c2, c0, 2 @ TTB control register
+ mcr p15, 0, ip, c7, c5, 4 @ ISB
+ mov r0, r11 @ control register
+ mov r2, r7, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, cpu_resume_l1_flags
+ b cpu_resume_mmu
+ENDPROC(cpu_v6_do_resume)
+cpu_resume_l1_flags:
+ ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP)
+ ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP)
+#else
+#define cpu_v6_do_suspend 0
+#define cpu_v6_do_resume 0
+#endif
.type cpu_v6_name, #object
.word cpu_v6_dcache_clean_area
.word cpu_v6_switch_mm
.word cpu_v6_set_pte_ext
+ .word cpu_v6_suspend_size
+ .word cpu_v6_do_suspend
+ .word cpu_v6_do_resume
.size v6_processor_functions, . - v6_processor_functions
.section ".rodata"
ALT_UP(orr r0, r0, #TTB_FLAGS_UP)
#ifdef CONFIG_ARM_ERRATA_430973
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
+#endif
+#ifdef CONFIG_ARM_ERRATA_754322
+ dsb
#endif
mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
isb
1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
isb
+#ifdef CONFIG_ARM_ERRATA_754322
+ dsb
+#endif
mcr p15, 0, r1, c13, c0, 1 @ set context ID
isb
#endif
.ascii "ARMv7 Processor"
.align
+ /*
+ * Memory region attributes with SCTLR.TRE=1
+ *
+ * n = TEX[0],C,B
+ * TR = PRRR[2n+1:2n] - memory type
+ * IR = NMRR[2n+1:2n] - inner cacheable property
+ * OR = NMRR[2n+17:2n+16] - outer cacheable property
+ *
+ * n TR IR OR
+ * UNCACHED 000 00
+ * BUFFERABLE 001 10 00 00
+ * WRITETHROUGH 010 10 10 10
+ * WRITEBACK 011 10 11 11
+ * reserved 110
+ * WRITEALLOC 111 10 01 01
+ * DEV_SHARED 100 01
+ * DEV_NONSHARED 100 01
+ * DEV_WC 001 10
+ * DEV_CACHED 011 10
+ *
+ * Other attributes:
+ *
+ * DS0 = PRRR[16] = 0 - device shareable property
+ * DS1 = PRRR[17] = 1 - device shareable property
+ * NS0 = PRRR[18] = 0 - normal shareable property
+ * NS1 = PRRR[19] = 1 - normal shareable property
+ * NOS = PRRR[24+n] = 1 - not outer shareable
+ */
+.equ PRRR, 0xff0a81a8
+.equ NMRR, 0x40e040e0
+
+/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
+.globl cpu_v7_suspend_size
+.equ cpu_v7_suspend_size, 4 * 8
+#ifdef CONFIG_PM
+ENTRY(cpu_v7_do_suspend)
+ stmfd sp!, {r4 - r11, lr}
+ mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mrc p15, 0, r5, c13, c0, 1 @ Context ID
+ mrc p15, 0, r6, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r7, c2, c0, 0 @ TTB 0
+ mrc p15, 0, r8, c2, c0, 1 @ TTB 1
+ mrc p15, 0, r9, c1, c0, 0 @ Control register
+ mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
+ mrc p15, 0, r11, c1, c0, 2 @ Co-processor access control
+ stmia r0, {r4 - r11}
+ ldmfd sp!, {r4 - r11, pc}
+ENDPROC(cpu_v7_do_suspend)
+
+ENTRY(cpu_v7_do_resume)
+ mov ip, #0
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs
+ mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
+ ldmia r0, {r4 - r11}
+ mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mcr p15, 0, r5, c13, c0, 1 @ Context ID
+ mcr p15, 0, r6, c3, c0, 0 @ Domain ID
+ mcr p15, 0, r7, c2, c0, 0 @ TTB 0
+ mcr p15, 0, r8, c2, c0, 1 @ TTB 1
+ mcr p15, 0, ip, c2, c0, 2 @ TTB control register
+ mcr p15, 0, r10, c1, c0, 1 @ Auxillary control register
+ mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control
+ ldr r4, =PRRR @ PRRR
+ ldr r5, =NMRR @ NMRR
+ mcr p15, 0, r4, c10, c2, 0 @ write PRRR
+ mcr p15, 0, r5, c10, c2, 1 @ write NMRR
+ isb
+ mov r0, r9 @ control register
+ mov r2, r7, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, cpu_resume_l1_flags
+ b cpu_resume_mmu
+ENDPROC(cpu_v7_do_resume)
+cpu_resume_l1_flags:
+ ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP)
+ ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP)
+#else
+#define cpu_v7_do_suspend 0
+#define cpu_v7_do_resume 0
+#endif
+
__CPUINIT
/*
ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP)
ALT_UP(orr r4, r4, #TTB_FLAGS_UP)
mcr p15, 0, r4, c2, c0, 1 @ load TTB1
- /*
- * Memory region attributes with SCTLR.TRE=1
- *
- * n = TEX[0],C,B
- * TR = PRRR[2n+1:2n] - memory type
- * IR = NMRR[2n+1:2n] - inner cacheable property
- * OR = NMRR[2n+17:2n+16] - outer cacheable property
- *
- * n TR IR OR
- * UNCACHED 000 00
- * BUFFERABLE 001 10 00 00
- * WRITETHROUGH 010 10 10 10
- * WRITEBACK 011 10 11 11
- * reserved 110
- * WRITEALLOC 111 10 01 01
- * DEV_SHARED 100 01
- * DEV_NONSHARED 100 01
- * DEV_WC 001 10
- * DEV_CACHED 011 10
- *
- * Other attributes:
- *
- * DS0 = PRRR[16] = 0 - device shareable property
- * DS1 = PRRR[17] = 1 - device shareable property
- * NS0 = PRRR[18] = 0 - normal shareable property
- * NS1 = PRRR[19] = 1 - normal shareable property
- * NOS = PRRR[24+n] = 1 - not outer shareable
- */
- ldr r5, =0xff0a81a8 @ PRRR
- ldr r6, =0x40e040e0 @ NMRR
+ ldr r5, =PRRR @ PRRR
+ ldr r6, =NMRR @ NMRR
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
mcr p15, 0, r6, c10, c2, 1 @ write NMRR
#endif
.word cpu_v7_dcache_clean_area
.word cpu_v7_switch_mm
.word cpu_v7_set_pte_ext
+ .word 0
+ .word 0
+ .word 0
.size v7_processor_functions, . - v7_processor_functions
.section ".rodata"
mov pc, lr
.ltorg
-
.align
+.globl cpu_xsc3_suspend_size
+.equ cpu_xsc3_suspend_size, 4 * 8
+#ifdef CONFIG_PM
+ENTRY(cpu_xsc3_do_suspend)
+ stmfd sp!, {r4 - r10, lr}
+ mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
+ mrc p15, 0, r5, c15, c1, 0 @ CP access reg
+ mrc p15, 0, r6, c13, c0, 0 @ PID
+ mrc p15, 0, r7, c3, c0, 0 @ domain ID
+ mrc p15, 0, r8, c2, c0, 0 @ translation table base addr
+ mrc p15, 0, r9, c1, c0, 1 @ auxiliary control reg
+ mrc p15, 0, r10, c1, c0, 0 @ control reg
+ bic r4, r4, #2 @ clear frequency change bit
+ stmia r0, {r1, r4 - r10} @ store v:p offset + cp regs
+ ldmia sp!, {r4 - r10, pc}
+ENDPROC(cpu_xsc3_do_suspend)
+
+ENTRY(cpu_xsc3_do_resume)
+ ldmia r0, {r1, r4 - r10} @ load v:p offset + cp regs
+ mov ip, #0
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
+ mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer
+ mcr p15, 0, ip, c7, c5, 4 @ flush prefetch buffer
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mcr p14, 0, r4, c6, c0, 0 @ clock configuration, turbo mode.
+ mcr p15, 0, r5, c15, c1, 0 @ CP access reg
+ mcr p15, 0, r6, c13, c0, 0 @ PID
+ mcr p15, 0, r7, c3, c0, 0 @ domain ID
+ mcr p15, 0, r8, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r9, c1, c0, 1 @ auxiliary control reg
+
+ @ temporarily map resume_turn_on_mmu into the page table,
+ @ otherwise prefetch abort occurs after MMU is turned on
+ mov r0, r10 @ control register
+ mov r2, r8, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, =0x542e @ section flags
+ b cpu_resume_mmu
+ENDPROC(cpu_xsc3_do_resume)
+#else
+#define cpu_xsc3_do_suspend 0
+#define cpu_xsc3_do_resume 0
+#endif
+
__CPUINIT
.type __xsc3_setup, #function
.word cpu_xsc3_dcache_clean_area
.word cpu_xsc3_switch_mm
.word cpu_xsc3_set_pte_ext
+ .word cpu_xsc3_suspend_size
+ .word cpu_xsc3_do_suspend
+ .word cpu_xsc3_do_resume
.size xsc3_processor_functions, . - xsc3_processor_functions
.section ".rodata"
xscale_set_pte_ext_epilogue
mov pc, lr
-
.ltorg
-
.align
+.globl cpu_xscale_suspend_size
+.equ cpu_xscale_suspend_size, 4 * 7
+#ifdef CONFIG_PM
+ENTRY(cpu_xscale_do_suspend)
+ stmfd sp!, {r4 - r10, lr}
+ mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
+ mrc p15, 0, r5, c15, c1, 0 @ CP access reg
+ mrc p15, 0, r6, c13, c0, 0 @ PID
+ mrc p15, 0, r7, c3, c0, 0 @ domain ID
+ mrc p15, 0, r8, c2, c0, 0 @ translation table base addr
+ mrc p15, 0, r9, c1, c1, 0 @ auxiliary control reg
+ mrc p15, 0, r10, c1, c0, 0 @ control reg
+ bic r4, r4, #2 @ clear frequency change bit
+ stmia r0, {r4 - r10} @ store cp regs
+ ldmfd sp!, {r4 - r10, pc}
+ENDPROC(cpu_xscale_do_suspend)
+
+ENTRY(cpu_xscale_do_resume)
+ ldmia r0, {r4 - r10} @ load cp regs
+ mov ip, #0
+ mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
+ mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
+ mcr p14, 0, r4, c6, c0, 0 @ clock configuration, turbo mode.
+ mcr p15, 0, r5, c15, c1, 0 @ CP access reg
+ mcr p15, 0, r6, c13, c0, 0 @ PID
+ mcr p15, 0, r7, c3, c0, 0 @ domain ID
+ mcr p15, 0, r8, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r9, c1, c1, 0 @ auxiliary control reg
+ mov r0, r10 @ control register
+ mov r2, r8, lsr #14 @ get TTB0 base
+ mov r2, r2, lsl #14
+ ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE
+ b cpu_resume_mmu
+ENDPROC(cpu_xscale_do_resume)
+#else
+#define cpu_xscale_do_suspend 0
+#define cpu_xscale_do_resume 0
+#endif
+
__CPUINIT
.type __xscale_setup, #function
.word cpu_xscale_dcache_clean_area
.word cpu_xscale_switch_mm
.word cpu_xscale_set_pte_ext
+ .word cpu_xscale_suspend_size
+ .word cpu_xscale_do_suspend
+ .word cpu_xscale_do_resume
.size xscale_processor_functions, . - xscale_processor_functions
.section ".rodata"
arm_vmregion_alloc(struct arm_vmregion_head *head, size_t align,
size_t size, gfp_t gfp)
{
- unsigned long addr = head->vm_start, end = head->vm_end - size;
+ unsigned long start = head->vm_start, addr = head->vm_end;
unsigned long flags;
struct arm_vmregion *c, *new;
spin_lock_irqsave(&head->vm_lock, flags);
- list_for_each_entry(c, &head->vm_list, vm_list) {
- if ((addr + size) < addr)
- goto nospc;
- if ((addr + size) <= c->vm_start)
+ addr = rounddown(addr - size, align);
+ list_for_each_entry_reverse(c, &head->vm_list, vm_list) {
+ if (addr >= c->vm_end)
goto found;
- addr = ALIGN(c->vm_end, align);
- if (addr > end)
+ addr = rounddown(c->vm_start - size, align);
+ if (addr < start)
goto nospc;
}
found:
/*
- * Insert this entry _before_ the one we found.
+ * Insert this entry after the one we found.
*/
- list_add_tail(&new->vm_list, &c->vm_list);
+ list_add(&new->vm_list, &c->vm_list);
new->vm_start = addr;
new->vm_end = addr + size;
new->vm_active = 1;
#if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
# if defined CONFIG_ARCH_MX1
-# define PHYS_OFFSET MX1_PHYS_OFFSET
+# define PLAT_PHYS_OFFSET MX1_PHYS_OFFSET
# elif defined CONFIG_MACH_MX21
-# define PHYS_OFFSET MX21_PHYS_OFFSET
+# define PLAT_PHYS_OFFSET MX21_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX25
-# define PHYS_OFFSET MX25_PHYS_OFFSET
+# define PLAT_PHYS_OFFSET MX25_PHYS_OFFSET
# elif defined CONFIG_MACH_MX27
-# define PHYS_OFFSET MX27_PHYS_OFFSET
+# define PLAT_PHYS_OFFSET MX27_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX3
-# define PHYS_OFFSET MX3x_PHYS_OFFSET
+# define PLAT_PHYS_OFFSET MX3x_PHYS_OFFSET
# elif defined CONFIG_ARCH_MXC91231
-# define PHYS_OFFSET MXC91231_PHYS_OFFSET
+# define PLAT_PHYS_OFFSET MXC91231_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX50
-# define PHYS_OFFSET MX50_PHYS_OFFSET
+# define PLAT_PHYS_OFFSET MX50_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX51
-# define PHYS_OFFSET MX51_PHYS_OFFSET
+# define PLAT_PHYS_OFFSET MX51_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX53
-# define PHYS_OFFSET MX53_PHYS_OFFSET
+# define PLAT_PHYS_OFFSET MX53_PHYS_OFFSET
# endif
#endif
* Physical DRAM offset.
*/
#if defined(CONFIG_ARCH_OMAP1)
-#define PHYS_OFFSET UL(0x10000000)
+#define PLAT_PHYS_OFFSET UL(0x10000000)
#else
-#define PHYS_OFFSET UL(0x80000000)
+#define PLAT_PHYS_OFFSET UL(0x80000000)
#endif
/*
* 2. We assume printascii is called at least once before paging_init,
* and addruart has a chance to read OMAP_UART_INFO
*/
-#define OMAP_UART_INFO (PHYS_OFFSET + 0x3ffc)
+#define OMAP_UART_INFO (PLAT_PHYS_OFFSET + 0x3ffc)
/* OMAP1 serial ports */
#define OMAP1_UART1_BASE 0xfffb0000
#define __ARCH_ARM_OMAP_SRAM_H
#ifndef __ASSEMBLY__
-extern void * omap_sram_push(void * start, unsigned long size);
+#include <asm/fncpy.h>
+
+extern void *omap_sram_push_address(unsigned long size);
+
+/* Macro to push a function to the internal SRAM, using the fncpy API */
+#define omap_sram_push(funcp, size) ({ \
+ typeof(&(funcp)) _res = NULL; \
+ void *_sram_address = omap_sram_push_address(size); \
+ if (_sram_address) \
+ _res = fncpy(_sram_address, &(funcp), size); \
+ _res; \
+})
+
extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
omap_sram_size - SRAM_BOOTLOADER_SZ);
}
-void * omap_sram_push(void * start, unsigned long size)
+/*
+ * Memory allocator for SRAM: calculates the new ceiling address
+ * for pushing a function using the fncpy API.
+ *
+ * Note that fncpy requires the returned address to be aligned
+ * to an 8-byte boundary.
+ */
+void *omap_sram_push_address(unsigned long size)
{
if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
printk(KERN_ERR "Not enough space in SRAM\n");
}
omap_sram_ceil -= size;
- omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, sizeof(void *));
- memcpy((void *)omap_sram_ceil, start, size);
- flush_icache_range((unsigned long)omap_sram_ceil,
- (unsigned long)(omap_sram_ceil + size));
+ omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, FNCPY_ALIGN);
return (void *)omap_sram_ceil;
}
/* s3c_cpu_save
*
* entry:
- * r0 = save address (virtual addr of s3c_sleep_save_phys)
+ * r1 = v:p offset
*/
ENTRY(s3c_cpu_save)
stmfd sp!, { r4 - r12, lr }
-
- @@ store co-processor registers
-
- mrc p15, 0, r4, c13, c0, 0 @ PID
- mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ translation table base address
- mrc p15, 0, r7, c1, c0, 0 @ control register
-
- stmia r0, { r4 - r13 }
-
- @@ write our state back to RAM
- bl s3c_pm_cb_flushcache
+ ldr r3, =resume_with_mmu
+ bl cpu_suspend
@@ jump to final code to send system to sleep
ldr r0, =pm_cpu_sleep
.ltorg
- @@ the next bits sit in the .data segment, even though they
- @@ happen to be code... the s3c_sleep_save_phys needs to be
- @@ accessed by the resume code before it can restore the MMU.
- @@ This means that the variable has to be close enough for the
- @@ code to read it... since the .text segment needs to be RO,
- @@ the data segment can be the only place to put this code.
-
- .data
-
- .global s3c_sleep_save_phys
-s3c_sleep_save_phys:
- .word 0
-
-
/* sleep magic, to allow the bootloader to check for an valid
* image to resume to. Must be the first word before the
* s3c_cpu_resume entry.
/* s3c_cpu_resume
*
* resume code entry for bootloader to call
- *
- * we must put this code here in the data segment as we have no
- * other way of restoring the stack pointer after sleep, and we
- * must not write to the code segment (code is read-only)
*/
ENTRY(s3c_cpu_resume)
beq 1001b
#endif /* CONFIG_DEBUG_RESUME */
- mov r1, #0
- mcr p15, 0, r1, c8, c7, 0 @@ invalidate I & D TLBs
- mcr p15, 0, r1, c7, c7, 0 @@ invalidate I & D caches
-
- ldr r0, s3c_sleep_save_phys @ address of restore block
- ldmia r0, { r4 - r13 }
-
- mcr p15, 0, r4, c13, c0, 0 @ PID
- mcr p15, 0, r5, c3, c0, 0 @ Domain ID
- mcr p15, 0, r6, c2, c0, 0 @ translation table base
-
-#ifdef CONFIG_DEBUG_RESUME
- mov r3, #'R'
- strb r3, [ r2, #S3C2410_UTXH ]
-#endif
-
- ldr r2, =resume_with_mmu
- mcr p15, 0, r7, c1, c0, 0 @ turn on MMU, etc
- nop @ second-to-last before mmu
- mov pc, r2 @ go back to virtual address
-
- .ltorg
+ b cpu_resume
/* from sleep.S */
-extern int s3c_cpu_save(unsigned long *saveblk);
+extern int s3c_cpu_save(unsigned long *saveblk, long);
extern void s3c_cpu_resume(void);
extern void s3c2410_cpu_suspend(void);
-extern unsigned long s3c_sleep_save_phys;
-
/* sleep save info */
/**
*/
extern void s3c_pm_save_gpios(void);
-/**
- * s3c_pm_cb_flushcache - callback for assembly code
- *
- * Callback to issue flush_cache_all() as this call is
- * not a directly callable object.
- */
-extern void s3c_pm_cb_flushcache(void);
-
extern void s3c_pm_save_core(void);
extern void s3c_pm_restore_core(void);
static int s3c_pm_enter(suspend_state_t state)
{
- static unsigned long regs_save[16];
-
/* ensure the debug is initialised (if enabled) */
s3c_pm_debug_init();
return -EINVAL;
}
- /* store the physical address of the register recovery block */
-
- s3c_sleep_save_phys = virt_to_phys(regs_save);
-
- S3C_PMDBG("s3c_sleep_save_phys=0x%08lx\n", s3c_sleep_save_phys);
-
/* save all necessary core registers not covered by the drivers */
s3c_pm_save_gpios();
* we resume as it saves its own register state and restores it
* during the resume. */
- s3c_cpu_save(regs_save);
+ s3c_cpu_save(0, PLAT_PHYS_OFFSET - PAGE_OFFSET);
/* restore the cpu state using the kernel's cpu init code. */
return 0;
}
-/* callback from assembly code */
-void s3c_pm_cb_flushcache(void)
-{
- flush_cache_all();
-}
-
static int s3c_pm_prepare(void)
{
/* prepare check area if configured */
#
# Common support
-obj-y := clock.o padmux.o time.o
+obj-y := clock.o time.o
-obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o
+obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o padmux.o
*/
#include <linux/bug.h>
+#include <linux/clk.h>
+#include <linux/debugfs.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/spinlock.h>
-#include <mach/misc_regs.h>
#include <plat/clock.h>
static DEFINE_SPINLOCK(clocks_lock);
static LIST_HEAD(root_clks);
+#ifdef CONFIG_DEBUG_FS
+static LIST_HEAD(clocks);
+#endif
-static void propagate_rate(struct list_head *);
+static void propagate_rate(struct clk *, int on_init);
+#ifdef CONFIG_DEBUG_FS
+static int clk_debugfs_reparent(struct clk *);
+#endif
static int generic_clk_enable(struct clk *clk)
{
.disable = generic_clk_disable,
};
+/* returns current programmed clocks clock info structure */
+static struct pclk_info *pclk_info_get(struct clk *clk)
+{
+ unsigned int val, i;
+ struct pclk_info *info = NULL;
+
+ val = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift)
+ & clk->pclk_sel->pclk_sel_mask;
+
+ for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
+ if (clk->pclk_sel->pclk_info[i].pclk_val == val)
+ info = &clk->pclk_sel->pclk_info[i];
+ }
+
+ return info;
+}
+
+/*
+ * Set Update pclk, and pclk_info of clk and add clock sibling node to current
+ * parents children list
+ */
+static void clk_reparent(struct clk *clk, struct pclk_info *pclk_info)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ list_del(&clk->sibling);
+ list_add(&clk->sibling, &pclk_info->pclk->children);
+
+ clk->pclk = pclk_info->pclk;
+ spin_unlock_irqrestore(&clocks_lock, flags);
+
+#ifdef CONFIG_DEBUG_FS
+ clk_debugfs_reparent(clk);
+#endif
+}
+
+static void do_clk_disable(struct clk *clk)
+{
+ if (!clk)
+ return;
+
+ if (!clk->usage_count) {
+ WARN_ON(1);
+ return;
+ }
+
+ clk->usage_count--;
+
+ if (clk->usage_count == 0) {
+ /*
+ * Surely, there are no active childrens or direct users
+ * of this clock
+ */
+ if (clk->pclk)
+ do_clk_disable(clk->pclk);
+
+ if (clk->ops && clk->ops->disable)
+ clk->ops->disable(clk);
+ }
+}
+
+static int do_clk_enable(struct clk *clk)
+{
+ int ret = 0;
+
+ if (!clk)
+ return -EFAULT;
+
+ if (clk->usage_count == 0) {
+ if (clk->pclk) {
+ ret = do_clk_enable(clk->pclk);
+ if (ret)
+ goto err;
+ }
+ if (clk->ops && clk->ops->enable) {
+ ret = clk->ops->enable(clk);
+ if (ret) {
+ if (clk->pclk)
+ do_clk_disable(clk->pclk);
+ goto err;
+ }
+ }
+ /*
+ * Since the clock is going to be used for the first
+ * time please reclac
+ */
+ if (clk->recalc) {
+ ret = clk->recalc(clk);
+ if (ret)
+ goto err;
+ }
+ }
+ clk->usage_count++;
+err:
+ return ret;
+}
+
/*
* clk_enable - inform the system when the clock source should be running.
* @clk: clock source
unsigned long flags;
int ret = 0;
- if (!clk || IS_ERR(clk))
- return -EFAULT;
-
spin_lock_irqsave(&clocks_lock, flags);
- if (clk->usage_count == 0) {
- if (clk->ops && clk->ops->enable)
- ret = clk->ops->enable(clk);
- }
- clk->usage_count++;
+ ret = do_clk_enable(clk);
spin_unlock_irqrestore(&clocks_lock, flags);
-
return ret;
}
EXPORT_SYMBOL(clk_enable);
{
unsigned long flags;
- if (!clk || IS_ERR(clk))
- return;
-
- WARN_ON(clk->usage_count == 0);
-
spin_lock_irqsave(&clocks_lock, flags);
- clk->usage_count--;
- if (clk->usage_count == 0) {
- if (clk->ops && clk->ops->disable)
- clk->ops->disable(clk);
- }
+ do_clk_disable(clk);
spin_unlock_irqrestore(&clocks_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
int i, found = 0, val = 0;
unsigned long flags;
- if (!clk || IS_ERR(clk) || !parent || IS_ERR(parent))
+ if (!clk || !parent)
return -EFAULT;
- if (clk->usage_count)
- return -EBUSY;
- if (!clk->pclk_sel)
- return -EPERM;
if (clk->pclk == parent)
return 0;
+ if (!clk->pclk_sel)
+ return -EPERM;
+ /* check if requested parent is in clk parent list */
for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
if (clk->pclk_sel->pclk_info[i].pclk == parent) {
found = 1;
/* reflect parent change in hardware */
val = readl(clk->pclk_sel->pclk_sel_reg);
val &= ~(clk->pclk_sel->pclk_sel_mask << clk->pclk_sel_shift);
- val |= clk->pclk_sel->pclk_info[i].pclk_mask << clk->pclk_sel_shift;
+ val |= clk->pclk_sel->pclk_info[i].pclk_val << clk->pclk_sel_shift;
writel(val, clk->pclk_sel->pclk_sel_reg);
spin_unlock_irqrestore(&clocks_lock, flags);
/* reflect parent change in software */
- clk->recalc(clk);
- propagate_rate(&clk->children);
+ clk_reparent(clk, &clk->pclk_sel->pclk_info[i]);
+
+ propagate_rate(clk, 0);
return 0;
}
EXPORT_SYMBOL(clk_set_parent);
+/**
+ * clk_set_rate - set the clock rate for a clock source
+ * @clk: clock source
+ * @rate: desired clock rate in Hz
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long flags;
+ int ret = -EINVAL;
+
+ if (!clk || !rate)
+ return -EFAULT;
+
+ if (clk->set_rate) {
+ spin_lock_irqsave(&clocks_lock, flags);
+ ret = clk->set_rate(clk, rate);
+ if (!ret)
+ /* if successful -> propagate */
+ propagate_rate(clk, 0);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+ } else if (clk->pclk) {
+ u32 mult = clk->div_factor ? clk->div_factor : 1;
+ ret = clk_set_rate(clk->pclk, mult * rate);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
/* registers clock in platform clock framework */
void clk_register(struct clk_lookup *cl)
{
- struct clk *clk = cl->clk;
+ struct clk *clk;
unsigned long flags;
- if (!clk || IS_ERR(clk))
+ if (!cl || !cl->clk)
return;
+ clk = cl->clk;
spin_lock_irqsave(&clocks_lock, flags);
/* root clock don't have any parents */
if (!clk->pclk && !clk->pclk_sel) {
list_add(&clk->sibling, &root_clks);
- /* add clocks with only one parent to parent's children list */
} else if (clk->pclk && !clk->pclk_sel) {
+ /* add clocks with only one parent to parent's children list */
list_add(&clk->sibling, &clk->pclk->children);
} else {
- /* add clocks with > 1 parent to 1st parent's children list */
- list_add(&clk->sibling,
- &clk->pclk_sel->pclk_info[0].pclk->children);
+ /* clocks with more than one parent */
+ struct pclk_info *pclk_info;
+
+ pclk_info = pclk_info_get(clk);
+ if (!pclk_info) {
+ pr_err("CLKDEV: invalid pclk info of clk with"
+ " %s dev_id and %s con_id\n",
+ cl->dev_id, cl->con_id);
+ } else {
+ clk->pclk = pclk_info->pclk;
+ list_add(&clk->sibling, &pclk_info->pclk->children);
+ }
}
+
spin_unlock_irqrestore(&clocks_lock, flags);
+ /* debugfs specific */
+#ifdef CONFIG_DEBUG_FS
+ list_add(&clk->node, &clocks);
+ clk->cl = cl;
+#endif
+
/* add clock to arm clockdev framework */
clkdev_add(cl);
}
/**
- * propagate_rate - recalculate and propagate all clocks in list head
+ * propagate_rate - recalculate and propagate all clocks to children
+ * @pclk: parent clock required to be propogated
+ * @on_init: flag for enabling clocks which are ENABLED_ON_INIT.
*
- * Recalculates all root clocks in list head, which if the clock's .recalc is
- * set correctly, should also propagate their rates.
+ * Recalculates all children clocks
*/
-static void propagate_rate(struct list_head *lhead)
+void propagate_rate(struct clk *pclk, int on_init)
{
- struct clk *clkp, *_temp;
+ struct clk *clk, *_temp;
+ int ret = 0;
- list_for_each_entry_safe(clkp, _temp, lhead, sibling) {
- if (clkp->recalc)
- clkp->recalc(clkp);
- propagate_rate(&clkp->children);
+ list_for_each_entry_safe(clk, _temp, &pclk->children, sibling) {
+ if (clk->recalc) {
+ ret = clk->recalc(clk);
+ /*
+ * recalc will return error if clk out is not programmed
+ * In this case configure default rate.
+ */
+ if (ret && clk->set_rate)
+ clk->set_rate(clk, 0);
+ }
+ propagate_rate(clk, on_init);
+
+ if (!on_init)
+ continue;
+
+ /* Enable clks enabled on init, in software view */
+ if (clk->flags & ENABLED_ON_INIT)
+ do_clk_enable(clk);
}
}
-/* returns current programmed clocks clock info structure */
-static struct pclk_info *pclk_info_get(struct clk *clk)
+/**
+ * round_rate_index - return closest programmable rate index in rate_config tbl
+ * @clk: ptr to clock structure
+ * @drate: desired rate
+ * @rate: final rate will be returned in this variable only.
+ *
+ * Finds index in rate_config for highest clk rate which is less than
+ * requested rate. If there is no clk rate lesser than requested rate then
+ * -EINVAL is returned. This routine assumes that rate_config is written
+ * in incrementing order of clk rates.
+ * If drate passed is zero then default rate is programmed.
+ */
+static int
+round_rate_index(struct clk *clk, unsigned long drate, unsigned long *rate)
{
- unsigned int mask, i;
- unsigned long flags;
- struct pclk_info *info = NULL;
+ unsigned long tmp = 0, prev_rate = 0;
+ int index;
- spin_lock_irqsave(&clocks_lock, flags);
- mask = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift)
- & clk->pclk_sel->pclk_sel_mask;
+ if (!clk->calc_rate)
+ return -EFAULT;
- for (i = 0; i < clk->pclk_sel->pclk_count; i++) {
- if (clk->pclk_sel->pclk_info[i].pclk_mask == mask)
- info = &clk->pclk_sel->pclk_info[i];
+ if (!drate)
+ return -EINVAL;
+
+ /*
+ * This loops ends on two conditions:
+ * - as soon as clk is found with rate greater than requested rate.
+ * - if all clks in rate_config are smaller than requested rate.
+ */
+ for (index = 0; index < clk->rate_config.count; index++) {
+ prev_rate = tmp;
+ tmp = clk->calc_rate(clk, index);
+ if (drate < tmp) {
+ index--;
+ break;
+ }
}
- spin_unlock_irqrestore(&clocks_lock, flags);
+ /* return if can't find suitable clock */
+ if (index < 0) {
+ index = -EINVAL;
+ *rate = 0;
+ } else if (index == clk->rate_config.count) {
+ /* program with highest clk rate possible */
+ index = clk->rate_config.count - 1;
+ *rate = tmp;
+ } else
+ *rate = prev_rate;
- return info;
+ return index;
}
-/*
- * Set pclk as cclk's parent and add clock sibling node to current parents
- * children list
+/**
+ * clk_round_rate - adjust a rate to the exact rate a clock can provide
+ * @clk: clock source
+ * @rate: desired clock rate in Hz
+ *
+ * Returns rounded clock rate in Hz, or negative errno.
*/
-static void change_parent(struct clk *cclk, struct clk *pclk)
+long clk_round_rate(struct clk *clk, unsigned long drate)
{
- unsigned long flags;
+ long rate = 0;
+ int index;
+
+ /*
+ * propagate call to parent who supports calc_rate. Similar approach is
+ * used in clk_set_rate.
+ */
+ if (!clk->calc_rate) {
+ u32 mult;
+ if (!clk->pclk)
+ return clk->rate;
+
+ mult = clk->div_factor ? clk->div_factor : 1;
+ return clk_round_rate(clk->pclk, mult * drate) / mult;
+ }
- spin_lock_irqsave(&clocks_lock, flags);
- list_del(&cclk->sibling);
- list_add(&cclk->sibling, &pclk->children);
+ index = round_rate_index(clk, drate, &rate);
+ if (index >= 0)
+ return rate;
+ else
+ return index;
+}
+EXPORT_SYMBOL(clk_round_rate);
- cclk->pclk = pclk;
- spin_unlock_irqrestore(&clocks_lock, flags);
+/*All below functions are called with lock held */
+
+/*
+ * Calculates pll clk rate for specific value of mode, m, n and p
+ *
+ * In normal mode
+ * rate = (2 * M[15:8] * Fin)/(N * 2^P)
+ *
+ * In Dithered mode
+ * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
+ */
+unsigned long pll_calc_rate(struct clk *clk, int index)
+{
+ unsigned long rate = clk->pclk->rate;
+ struct pll_rate_tbl *tbls = clk->rate_config.tbls;
+ unsigned int mode;
+
+ mode = tbls[index].mode ? 256 : 1;
+ return (((2 * rate / 10000) * tbls[index].m) /
+ (mode * tbls[index].n * (1 << tbls[index].p))) * 10000;
}
/*
* In Dithered mode
* rate = (2 * M[15:0] * Fin)/(256 * N * 2^P)
*/
-void pll1_clk_recalc(struct clk *clk)
+int pll_clk_recalc(struct clk *clk)
{
struct pll_clk_config *config = clk->private_data;
unsigned int num = 2, den = 0, val, mode = 0;
- unsigned long flags;
- spin_lock_irqsave(&clocks_lock, flags);
- mode = (readl(config->mode_reg) >> PLL_MODE_SHIFT) &
- PLL_MODE_MASK;
+ mode = (readl(config->mode_reg) >> config->masks->mode_shift) &
+ config->masks->mode_mask;
val = readl(config->cfg_reg);
/* calculate denominator */
- den = (val >> PLL_DIV_P_SHIFT) & PLL_DIV_P_MASK;
+ den = (val >> config->masks->div_p_shift) & config->masks->div_p_mask;
den = 1 << den;
- den *= (val >> PLL_DIV_N_SHIFT) & PLL_DIV_N_MASK;
+ den *= (val >> config->masks->div_n_shift) & config->masks->div_n_mask;
/* calculate numerator & denominator */
if (!mode) {
/* Normal mode */
- num *= (val >> PLL_NORM_FDBK_M_SHIFT) & PLL_NORM_FDBK_M_MASK;
+ num *= (val >> config->masks->norm_fdbk_m_shift) &
+ config->masks->norm_fdbk_m_mask;
} else {
/* Dithered mode */
- num *= (val >> PLL_DITH_FDBK_M_SHIFT) & PLL_DITH_FDBK_M_MASK;
+ num *= (val >> config->masks->dith_fdbk_m_shift) &
+ config->masks->dith_fdbk_m_mask;
den *= 256;
}
+ if (!den)
+ return -EINVAL;
+
clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
- spin_unlock_irqrestore(&clocks_lock, flags);
+ return 0;
+}
+
+/*
+ * Configures new clock rate of pll
+ */
+int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate)
+{
+ struct pll_rate_tbl *tbls = clk->rate_config.tbls;
+ struct pll_clk_config *config = clk->private_data;
+ unsigned long val, rate;
+ int i;
+
+ i = round_rate_index(clk, desired_rate, &rate);
+ if (i < 0)
+ return i;
+
+ val = readl(config->mode_reg) &
+ ~(config->masks->mode_mask << config->masks->mode_shift);
+ val |= (tbls[i].mode & config->masks->mode_mask) <<
+ config->masks->mode_shift;
+ writel(val, config->mode_reg);
+
+ val = readl(config->cfg_reg) &
+ ~(config->masks->div_p_mask << config->masks->div_p_shift);
+ val |= (tbls[i].p & config->masks->div_p_mask) <<
+ config->masks->div_p_shift;
+ val &= ~(config->masks->div_n_mask << config->masks->div_n_shift);
+ val |= (tbls[i].n & config->masks->div_n_mask) <<
+ config->masks->div_n_shift;
+ val &= ~(config->masks->dith_fdbk_m_mask <<
+ config->masks->dith_fdbk_m_shift);
+ if (tbls[i].mode)
+ val |= (tbls[i].m & config->masks->dith_fdbk_m_mask) <<
+ config->masks->dith_fdbk_m_shift;
+ else
+ val |= (tbls[i].m & config->masks->norm_fdbk_m_mask) <<
+ config->masks->norm_fdbk_m_shift;
+
+ writel(val, config->cfg_reg);
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+/*
+ * Calculates ahb, apb clk rate for specific value of div
+ */
+unsigned long bus_calc_rate(struct clk *clk, int index)
+{
+ unsigned long rate = clk->pclk->rate;
+ struct bus_rate_tbl *tbls = clk->rate_config.tbls;
+
+ return rate / (tbls[index].div + 1);
}
/* calculates current programmed rate of ahb or apb bus */
-void bus_clk_recalc(struct clk *clk)
+int bus_clk_recalc(struct clk *clk)
{
struct bus_clk_config *config = clk->private_data;
unsigned int div;
- unsigned long flags;
- spin_lock_irqsave(&clocks_lock, flags);
- div = ((readl(config->reg) >> config->shift) & config->mask) + 1;
+ div = ((readl(config->reg) >> config->masks->shift) &
+ config->masks->mask) + 1;
+
+ if (!div)
+ return -EINVAL;
+
clk->rate = (unsigned long)clk->pclk->rate / div;
- spin_unlock_irqrestore(&clocks_lock, flags);
+ return 0;
+}
+
+/* Configures new clock rate of AHB OR APB bus */
+int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate)
+{
+ struct bus_rate_tbl *tbls = clk->rate_config.tbls;
+ struct bus_clk_config *config = clk->private_data;
+ unsigned long val, rate;
+ int i;
+
+ i = round_rate_index(clk, desired_rate, &rate);
+ if (i < 0)
+ return i;
+
+ val = readl(config->reg) &
+ ~(config->masks->mask << config->masks->shift);
+ val |= (tbls[i].div & config->masks->mask) << config->masks->shift;
+ writel(val, config->reg);
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+/*
+ * gives rate for different values of eq, x and y
+ *
+ * Fout from synthesizer can be given from two equations:
+ * Fout1 = (Fin * X/Y)/2 EQ1
+ * Fout2 = Fin * X/Y EQ2
+ */
+unsigned long aux_calc_rate(struct clk *clk, int index)
+{
+ unsigned long rate = clk->pclk->rate;
+ struct aux_rate_tbl *tbls = clk->rate_config.tbls;
+ u8 eq = tbls[index].eq ? 1 : 2;
+
+ return (((rate/10000) * tbls[index].xscale) /
+ (tbls[index].yscale * eq)) * 10000;
}
/*
*
* Selection of eqn 1 or 2 is programmed in register
*/
-void aux_clk_recalc(struct clk *clk)
+int aux_clk_recalc(struct clk *clk)
{
struct aux_clk_config *config = clk->private_data;
- struct pclk_info *pclk_info = NULL;
unsigned int num = 1, den = 1, val, eqn;
- unsigned long flags;
- /* get current programmed parent */
- pclk_info = pclk_info_get(clk);
- if (!pclk_info) {
- spin_lock_irqsave(&clocks_lock, flags);
- clk->pclk = NULL;
- clk->rate = 0;
- spin_unlock_irqrestore(&clocks_lock, flags);
- return;
- }
+ val = readl(config->synth_reg);
- change_parent(clk, pclk_info->pclk);
+ eqn = (val >> config->masks->eq_sel_shift) &
+ config->masks->eq_sel_mask;
+ if (eqn == config->masks->eq1_mask)
+ den *= 2;
- spin_lock_irqsave(&clocks_lock, flags);
- if (pclk_info->scalable) {
- val = readl(config->synth_reg);
+ /* calculate numerator */
+ num = (val >> config->masks->xscale_sel_shift) &
+ config->masks->xscale_sel_mask;
- eqn = (val >> AUX_EQ_SEL_SHIFT) & AUX_EQ_SEL_MASK;
- if (eqn == AUX_EQ1_SEL)
- den *= 2;
+ /* calculate denominator */
+ den *= (val >> config->masks->yscale_sel_shift) &
+ config->masks->yscale_sel_mask;
- /* calculate numerator */
- num = (val >> AUX_XSCALE_SHIFT) & AUX_XSCALE_MASK;
+ if (!den)
+ return -EINVAL;
- /* calculate denominator */
- den *= (val >> AUX_YSCALE_SHIFT) & AUX_YSCALE_MASK;
- val = (((clk->pclk->rate/10000) * num) / den) * 10000;
- } else
- val = clk->pclk->rate;
+ clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000;
+ return 0;
+}
- clk->rate = val;
- spin_unlock_irqrestore(&clocks_lock, flags);
+/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
+int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate)
+{
+ struct aux_rate_tbl *tbls = clk->rate_config.tbls;
+ struct aux_clk_config *config = clk->private_data;
+ unsigned long val, rate;
+ int i;
+
+ i = round_rate_index(clk, desired_rate, &rate);
+ if (i < 0)
+ return i;
+
+ val = readl(config->synth_reg) &
+ ~(config->masks->eq_sel_mask << config->masks->eq_sel_shift);
+ val |= (tbls[i].eq & config->masks->eq_sel_mask) <<
+ config->masks->eq_sel_shift;
+ val &= ~(config->masks->xscale_sel_mask <<
+ config->masks->xscale_sel_shift);
+ val |= (tbls[i].xscale & config->masks->xscale_sel_mask) <<
+ config->masks->xscale_sel_shift;
+ val &= ~(config->masks->yscale_sel_mask <<
+ config->masks->yscale_sel_shift);
+ val |= (tbls[i].yscale & config->masks->yscale_sel_mask) <<
+ config->masks->yscale_sel_shift;
+ writel(val, config->synth_reg);
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+/*
+ * Calculates gpt clk rate for different values of mscale and nscale
+ *
+ * Fout= Fin/((2 ^ (N+1)) * (M+1))
+ */
+unsigned long gpt_calc_rate(struct clk *clk, int index)
+{
+ unsigned long rate = clk->pclk->rate;
+ struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
+
+ return rate / ((1 << (tbls[index].nscale + 1)) *
+ (tbls[index].mscale + 1));
}
/*
* Fout from synthesizer can be given from below equations:
* Fout= Fin/((2 ^ (N+1)) * (M+1))
*/
-void gpt_clk_recalc(struct clk *clk)
+int gpt_clk_recalc(struct clk *clk)
{
- struct aux_clk_config *config = clk->private_data;
- struct pclk_info *pclk_info = NULL;
+ struct gpt_clk_config *config = clk->private_data;
unsigned int div = 1, val;
- unsigned long flags;
- pclk_info = pclk_info_get(clk);
- if (!pclk_info) {
- spin_lock_irqsave(&clocks_lock, flags);
- clk->pclk = NULL;
- clk->rate = 0;
- spin_unlock_irqrestore(&clocks_lock, flags);
- return;
- }
-
- change_parent(clk, pclk_info->pclk);
+ val = readl(config->synth_reg);
+ div += (val >> config->masks->mscale_sel_shift) &
+ config->masks->mscale_sel_mask;
+ div *= 1 << (((val >> config->masks->nscale_sel_shift) &
+ config->masks->nscale_sel_mask) + 1);
- spin_lock_irqsave(&clocks_lock, flags);
- if (pclk_info->scalable) {
- val = readl(config->synth_reg);
- div += (val >> GPT_MSCALE_SHIFT) & GPT_MSCALE_MASK;
- div *= 1 << (((val >> GPT_NSCALE_SHIFT) & GPT_NSCALE_MASK) + 1);
- }
+ if (!div)
+ return -EINVAL;
clk->rate = (unsigned long)clk->pclk->rate / div;
- spin_unlock_irqrestore(&clocks_lock, flags);
+ return 0;
+}
+
+/* Configures new clock rate of gptiliary synthesizers used by: UART, FIRDA*/
+int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate)
+{
+ struct gpt_rate_tbl *tbls = clk->rate_config.tbls;
+ struct gpt_clk_config *config = clk->private_data;
+ unsigned long val, rate;
+ int i;
+
+ i = round_rate_index(clk, desired_rate, &rate);
+ if (i < 0)
+ return i;
+
+ val = readl(config->synth_reg) & ~(config->masks->mscale_sel_mask <<
+ config->masks->mscale_sel_shift);
+ val |= (tbls[i].mscale & config->masks->mscale_sel_mask) <<
+ config->masks->mscale_sel_shift;
+ val &= ~(config->masks->nscale_sel_mask <<
+ config->masks->nscale_sel_shift);
+ val |= (tbls[i].nscale & config->masks->nscale_sel_mask) <<
+ config->masks->nscale_sel_shift;
+ writel(val, config->synth_reg);
+
+ clk->rate = rate;
+
+ return 0;
}
/*
- * Used for clocks that always have same value as the parent clock divided by a
+ * Calculates clcd clk rate for different values of div
+ *
+ * Fout from synthesizer can be given from below equation:
+ * Fout= Fin/2*div (division factor)
+ * div is 17 bits:-
+ * 0-13 (fractional part)
+ * 14-16 (integer part)
+ * To calculate Fout we left shift val by 14 bits and divide Fin by
+ * complete div (including fractional part) and then right shift the
+ * result by 14 places.
+ */
+unsigned long clcd_calc_rate(struct clk *clk, int index)
+{
+ unsigned long rate = clk->pclk->rate;
+ struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
+
+ rate /= 1000;
+ rate <<= 12;
+ rate /= (2 * tbls[index].div);
+ rate >>= 12;
+ rate *= 1000;
+
+ return rate;
+}
+
+/*
+ * calculates current programmed rate of clcd synthesizer
+ * Fout from synthesizer can be given from below equation:
+ * Fout= Fin/2*div (division factor)
+ * div is 17 bits:-
+ * 0-13 (fractional part)
+ * 14-16 (integer part)
+ * To calculate Fout we left shift val by 14 bits and divide Fin by
+ * complete div (including fractional part) and then right shift the
+ * result by 14 places.
+ */
+int clcd_clk_recalc(struct clk *clk)
+{
+ struct clcd_clk_config *config = clk->private_data;
+ unsigned int div = 1;
+ unsigned long prate;
+ unsigned int val;
+
+ val = readl(config->synth_reg);
+ div = (val >> config->masks->div_factor_shift) &
+ config->masks->div_factor_mask;
+
+ if (!div)
+ return -EINVAL;
+
+ prate = clk->pclk->rate / 1000; /* first level division, make it KHz */
+
+ clk->rate = (((unsigned long)prate << 12) / (2 * div)) >> 12;
+ clk->rate *= 1000;
+ return 0;
+}
+
+/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/
+int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate)
+{
+ struct clcd_rate_tbl *tbls = clk->rate_config.tbls;
+ struct clcd_clk_config *config = clk->private_data;
+ unsigned long val, rate;
+ int i;
+
+ i = round_rate_index(clk, desired_rate, &rate);
+ if (i < 0)
+ return i;
+
+ val = readl(config->synth_reg) & ~(config->masks->div_factor_mask <<
+ config->masks->div_factor_shift);
+ val |= (tbls[i].div & config->masks->div_factor_mask) <<
+ config->masks->div_factor_shift;
+ writel(val, config->synth_reg);
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+/*
+ * Used for clocks that always have value as the parent clock divided by a
* fixed divisor
*/
-void follow_parent(struct clk *clk)
+int follow_parent(struct clk *clk)
{
- unsigned long flags;
+ unsigned int div_factor = (clk->div_factor < 1) ? 1 : clk->div_factor;
- spin_lock_irqsave(&clocks_lock, flags);
- clk->rate = clk->pclk->rate;
- spin_unlock_irqrestore(&clocks_lock, flags);
+ clk->rate = clk->pclk->rate/div_factor;
+ return 0;
}
/**
*/
void recalc_root_clocks(void)
{
- propagate_rate(&root_clks);
+ struct clk *pclk;
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ list_for_each_entry(pclk, &root_clks, sibling) {
+ if (pclk->recalc) {
+ ret = pclk->recalc(pclk);
+ /*
+ * recalc will return error if clk out is not programmed
+ * In this case configure default clock.
+ */
+ if (ret && pclk->set_rate)
+ pclk->set_rate(pclk, 0);
+ }
+ propagate_rate(pclk, 1);
+ /* Enable clks enabled on init, in software view */
+ if (pclk->flags & ENABLED_ON_INIT)
+ do_clk_enable(pclk);
+ }
+ spin_unlock_irqrestore(&clocks_lock, flags);
+}
+
+#ifdef CONFIG_DEBUG_FS
+/*
+ * debugfs support to trace clock tree hierarchy and attributes
+ */
+static struct dentry *clk_debugfs_root;
+static int clk_debugfs_register_one(struct clk *c)
+{
+ int err;
+ struct dentry *d, *child;
+ struct clk *pa = c->pclk;
+ char s[255];
+ char *p = s;
+
+ if (c) {
+ if (c->cl->con_id)
+ p += sprintf(p, "%s", c->cl->con_id);
+ if (c->cl->dev_id)
+ p += sprintf(p, "%s", c->cl->dev_id);
+ }
+ d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root);
+ if (!d)
+ return -ENOMEM;
+ c->dent = d;
+
+ d = debugfs_create_u32("usage_count", S_IRUGO, c->dent,
+ (u32 *)&c->usage_count);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ d = debugfs_create_u32("rate", S_IRUGO, c->dent, (u32 *)&c->rate);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ d = debugfs_create_x32("flags", S_IRUGO, c->dent, (u32 *)&c->flags);
+ if (!d) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+ return 0;
+
+err_out:
+ d = c->dent;
+ list_for_each_entry(child, &d->d_subdirs, d_u.d_child)
+ debugfs_remove(child);
+ debugfs_remove(c->dent);
+ return err;
+}
+
+static int clk_debugfs_register(struct clk *c)
+{
+ int err;
+ struct clk *pa = c->pclk;
+
+ if (pa && !pa->dent) {
+ err = clk_debugfs_register(pa);
+ if (err)
+ return err;
+ }
+
+ if (!c->dent) {
+ err = clk_debugfs_register_one(c);
+ if (err)
+ return err;
+ }
+ return 0;
+}
+
+static int __init clk_debugfs_init(void)
+{
+ struct clk *c;
+ struct dentry *d;
+ int err;
+
+ d = debugfs_create_dir("clock", NULL);
+ if (!d)
+ return -ENOMEM;
+ clk_debugfs_root = d;
+
+ list_for_each_entry(c, &clocks, node) {
+ err = clk_debugfs_register(c);
+ if (err)
+ goto err_out;
+ }
+ return 0;
+err_out:
+ debugfs_remove_recursive(clk_debugfs_root);
+ return err;
+}
+late_initcall(clk_debugfs_init);
+
+static int clk_debugfs_reparent(struct clk *c)
+{
+ debugfs_remove(c->dent);
+ return clk_debugfs_register_one(c);
}
+#endif /* CONFIG_DEBUG_FS */
/* clk structure flags */
#define ALWAYS_ENABLED (1 << 0) /* clock always enabled */
#define RESET_TO_ENABLE (1 << 1) /* reset register bit to enable clk */
+#define ENABLED_ON_INIT (1 << 2) /* clocks enabled at init */
/**
* struct clkops - clock operations
/**
* struct pclk_info - parents info
* @pclk: pointer to parent clk
- * @pclk_mask: value to be written for selecting this parent
- * @scalable: Is parent scalable (1 - YES, 0 - NO)
+ * @pclk_val: value to be written for selecting this parent
*/
struct pclk_info {
struct clk *pclk;
- u8 pclk_mask;
- u8 scalable;
+ u8 pclk_val;
};
/**
struct pclk_sel {
struct pclk_info *pclk_info;
u8 pclk_count;
- unsigned int *pclk_sel_reg;
+ void __iomem *pclk_sel_reg;
unsigned int pclk_sel_mask;
};
+/**
+ * struct rate_config - clk rate configurations
+ * @tbls: array of device specific clk rate tables, in ascending order of rates
+ * @count: size of tbls array
+ * @default_index: default setting when originally disabled
+ */
+struct rate_config {
+ void *tbls;
+ u8 count;
+ u8 default_index;
+};
+
/**
* struct clk - clock structure
* @usage_count: num of users who enabled this clock
* @en_reg_bit: clk enable/disable bit
* @ops: clk enable/disable ops - generic_clkops selected if NULL
* @recalc: pointer to clock rate recalculate function
+ * @set_rate: pointer to clock set rate function
+ * @calc_rate: pointer to clock get rate function for index
+ * @rate_config: rate configuration information, used by set_rate
+ * @div_factor: division factor to parent clock.
* @pclk: current parent clk
* @pclk_sel: pointer to parent selection structure
* @pclk_sel_shift: register shift for selecting parent of this clock
* @children: list for childrens or this clock
* @sibling: node for list of clocks having same parents
* @private_data: clock specific private data
+ * @node: list to maintain clocks linearly
+ * @cl: clocklook up assoicated with this clock
+ * @dent: object for debugfs
*/
struct clk {
unsigned int usage_count;
unsigned int flags;
unsigned long rate;
- unsigned int *en_reg;
+ void __iomem *en_reg;
u8 en_reg_bit;
const struct clkops *ops;
- void (*recalc) (struct clk *);
+ int (*recalc) (struct clk *);
+ int (*set_rate) (struct clk *, unsigned long rate);
+ unsigned long (*calc_rate)(struct clk *, int index);
+ struct rate_config rate_config;
+ unsigned int div_factor;
struct clk *pclk;
struct pclk_sel *pclk_sel;
struct list_head children;
struct list_head sibling;
void *private_data;
+#ifdef CONFIG_DEBUG_FS
+ struct list_head node;
+ struct clk_lookup *cl;
+ struct dentry *dent;
+#endif
};
/* pll configuration structure */
+struct pll_clk_masks {
+ u32 mode_mask;
+ u32 mode_shift;
+
+ u32 norm_fdbk_m_mask;
+ u32 norm_fdbk_m_shift;
+ u32 dith_fdbk_m_mask;
+ u32 dith_fdbk_m_shift;
+ u32 div_p_mask;
+ u32 div_p_shift;
+ u32 div_n_mask;
+ u32 div_n_shift;
+};
+
struct pll_clk_config {
- unsigned int *mode_reg;
- unsigned int *cfg_reg;
+ void __iomem *mode_reg;
+ void __iomem *cfg_reg;
+ struct pll_clk_masks *masks;
+};
+
+/* pll clk rate config structure */
+struct pll_rate_tbl {
+ u8 mode;
+ u16 m;
+ u8 n;
+ u8 p;
};
/* ahb and apb bus configuration structure */
+struct bus_clk_masks {
+ u32 mask;
+ u32 shift;
+};
+
struct bus_clk_config {
- unsigned int *reg;
- unsigned int mask;
- unsigned int shift;
+ void __iomem *reg;
+ struct bus_clk_masks *masks;
+};
+
+/* ahb and apb clk bus rate config structure */
+struct bus_rate_tbl {
+ u8 div;
+};
+
+/* Aux clk configuration structure: applicable to UART and FIRDA */
+struct aux_clk_masks {
+ u32 eq_sel_mask;
+ u32 eq_sel_shift;
+ u32 eq1_mask;
+ u32 eq2_mask;
+ u32 xscale_sel_mask;
+ u32 xscale_sel_shift;
+ u32 yscale_sel_mask;
+ u32 yscale_sel_shift;
};
-/*
- * Aux clk configuration structure: applicable to GPT, UART and FIRDA
- */
struct aux_clk_config {
- unsigned int *synth_reg;
+ void __iomem *synth_reg;
+ struct aux_clk_masks *masks;
+};
+
+/* aux clk rate config structure */
+struct aux_rate_tbl {
+ u16 xscale;
+ u16 yscale;
+ u8 eq;
+};
+
+/* GPT clk configuration structure */
+struct gpt_clk_masks {
+ u32 mscale_sel_mask;
+ u32 mscale_sel_shift;
+ u32 nscale_sel_mask;
+ u32 nscale_sel_shift;
+};
+
+struct gpt_clk_config {
+ void __iomem *synth_reg;
+ struct gpt_clk_masks *masks;
+};
+
+/* gpt clk rate config structure */
+struct gpt_rate_tbl {
+ u16 mscale;
+ u16 nscale;
+};
+
+/* clcd clk configuration structure */
+struct clcd_synth_masks {
+ u32 div_factor_mask;
+ u32 div_factor_shift;
+};
+
+struct clcd_clk_config {
+ void __iomem *synth_reg;
+ struct clcd_synth_masks *masks;
+};
+
+/* clcd clk rate config structure */
+struct clcd_rate_tbl {
+ u16 div;
};
/* platform specific clock functions */
void clk_register(struct clk_lookup *cl);
void recalc_root_clocks(void);
-/* clock recalc functions */
-void follow_parent(struct clk *clk);
-void pll1_clk_recalc(struct clk *clk);
-void bus_clk_recalc(struct clk *clk);
-void gpt_clk_recalc(struct clk *clk);
-void aux_clk_recalc(struct clk *clk);
+/* clock recalc & set rate functions */
+int follow_parent(struct clk *clk);
+unsigned long pll_calc_rate(struct clk *clk, int index);
+int pll_clk_recalc(struct clk *clk);
+int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate);
+unsigned long bus_calc_rate(struct clk *clk, int index);
+int bus_clk_recalc(struct clk *clk);
+int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate);
+unsigned long gpt_calc_rate(struct clk *clk, int index);
+int gpt_clk_recalc(struct clk *clk);
+int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate);
+unsigned long aux_calc_rate(struct clk *clk, int index);
+int aux_clk_recalc(struct clk *clk);
+int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate);
+unsigned long clcd_calc_rate(struct clk *clk, int index);
+int clcd_clk_recalc(struct clk *clk);
+int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate);
#endif /* __PLAT_CLOCK_H */
*/
#include <linux/amba/serial.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
.macro addruart, rp, rv
mov \rp, #SPEAR_DBG_UART_BASE @ Physical base
--- /dev/null
+/*
+ * arch/arm/plat-spear/include/plat/hardware.h
+ *
+ * Hardware definitions for SPEAr
+ *
+ * Copyright (C) 2010 ST Microelectronics
+ * Viresh Kumar<viresh.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_HARDWARE_H
+#define __PLAT_HARDWARE_H
+
+#ifndef __ASSEMBLY__
+#define IOMEM(x) ((void __iomem __force *)(x))
+#else
+#define IOMEM(x) (x)
+#endif
+
+#endif /* __PLAT_HARDWARE_H */
#define __PLAT_MEMORY_H
/* Physical DRAM offset */
-#define PHYS_OFFSET UL(0x00000000)
+#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif /* __PLAT_MEMORY_H */
#ifndef __PLAT_SYSTEM_H
#define __PLAT_SYSTEM_H
-#include <asm/hardware/sp810.h>
#include <linux/io.h>
-#include <mach/spear.h>
+#include <asm/hardware/sp810.h>
+#include <mach/hardware.h>
static inline void arch_idle(void)
{
#include <linux/io.h>
#include <linux/amba/serial.h>
-#include <mach/spear.h>
+#include <mach/hardware.h>
#ifndef __PLAT_UNCOMPRESS_H
#define __PLAT_UNCOMPRESS_H
/*
* arch/arm/plat-spear/time.c
*
- * Copyright (C) 2009 ST Microelectronics
+ * Copyright (C) 2010 ST Microelectronics
* Shiraz Hashim<shiraz.hashim@st.com>
*
* This file is licensed under the terms of the GNU General Public
#include <linux/time.h>
#include <linux/irq.h>
#include <asm/mach/time.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/spear.h>
#include <mach/generic.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
/*
* We would use TIMER0 and TIMER1 as clockevent and clocksource.
void __init spear_setup_timer(void)
{
- struct clk *pll3_clk;
+ int ret;
if (!request_mem_region(SPEAR_GPT0_BASE, SZ_1K, "gpt0")) {
pr_err("%s:cannot get IO addr\n", __func__);
goto err_iomap;
}
- pll3_clk = clk_get(NULL, "pll3_48m_clk");
- if (!pll3_clk) {
- pr_err("%s:couldn't get PLL3 as parent for gpt\n", __func__);
- goto err_iomap;
+ ret = clk_enable(gpt_clk);
+ if (ret < 0) {
+ pr_err("%s:couldn't enable gpt clock\n", __func__);
+ goto err_clk;
}
- clk_set_parent(gpt_clk, pll3_clk);
-
spear_clockevent_init();
spear_clocksource_init();
return;
+err_clk:
+ clk_put(gpt_clk);
err_iomap:
iounmap(gpt_base);
-
err_mem:
release_mem_region(SPEAR_GPT0_BASE, SZ_1K);
}
-
-struct sys_timer spear_sys_timer = {
- .init = spear_setup_timer,
-};
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x40000000)
+#define PLAT_PHYS_OFFSET UL(0x40000000)
#endif
/*
* Physical DRAM offset.
*/
-#define PHYS_OFFSET UL(0x20000000)
+#define PLAT_PHYS_OFFSET UL(0x20000000)
#endif
* Raise a SIGFPE for the current process.
* sicode describes the signal being raised.
*/
-void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs)
+static void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs)
{
siginfo_t info;
/*
* VFP hardware can lose all context when a CPU goes offline.
- * Safely clear our held state when a CPU has been killed, and
- * re-enable access to VFP when the CPU comes back online.
+ * As we will be running in SMP mode with CPU hotplug, we will save the
+ * hardware state at every thread switch. We clear our held state when
+ * a CPU has been killed, indicating that the VFP hardware doesn't contain
+ * a threads VFP state. When a CPU starts up, we re-enable access to the
+ * VFP hardware.
*
* Both CPU_DYING and CPU_STARTING are called on the CPU which
* is being offlined/onlined.
projects / linux-2.6-block.git / commitdiff