static void assert_edp_pll(struct intel_display *display, bool state)
{
- bool cur_state = intel_de_read(display, DP_A) & DP_PLL_ENABLE;
+ bool cur_state = intel_de_read(display, DP_A) & EDP_PLL_ENABLE;
INTEL_DISPLAY_STATE_WARN(display, cur_state != state,
"eDP PLL state assertion failure (expected %s, current %s)\n",
drm_dbg_kms(display->drm, "enabling eDP PLL for clock %d\n",
pipe_config->port_clock);
- intel_dp->DP &= ~DP_PLL_FREQ_MASK;
+ intel_dp->DP &= ~EDP_PLL_FREQ_MASK;
if (pipe_config->port_clock == 162000)
- intel_dp->DP |= DP_PLL_FREQ_162MHZ;
+ intel_dp->DP |= EDP_PLL_FREQ_162MHZ;
else
- intel_dp->DP |= DP_PLL_FREQ_270MHZ;
+ intel_dp->DP |= EDP_PLL_FREQ_270MHZ;
intel_de_write(display, DP_A, intel_dp->DP);
intel_de_posting_read(display, DP_A);
if (display->platform.ironlake)
intel_wait_for_vblank_if_active(display, !crtc->pipe);
- intel_dp->DP |= DP_PLL_ENABLE;
+ intel_dp->DP |= EDP_PLL_ENABLE;
intel_de_write(display, DP_A, intel_dp->DP);
intel_de_posting_read(display, DP_A);
drm_dbg_kms(display->drm, "disabling eDP PLL\n");
- intel_dp->DP &= ~DP_PLL_ENABLE;
+ intel_dp->DP &= ~EDP_PLL_ENABLE;
intel_de_write(display, DP_A, intel_dp->DP);
intel_de_posting_read(display, DP_A);
/* asserts want to know the pipe even if the port is disabled */
if (display->platform.ivybridge && port == PORT_A)
- *pipe = (val & DP_PIPE_SEL_MASK_IVB) >> DP_PIPE_SEL_SHIFT_IVB;
+ *pipe = REG_FIELD_GET(DP_PIPE_SEL_MASK_IVB, val);
else if (HAS_PCH_CPT(display) && port != PORT_A)
ret &= cpt_dp_port_selected(display, port, pipe);
else if (display->platform.cherryview)
- *pipe = (val & DP_PIPE_SEL_MASK_CHV) >> DP_PIPE_SEL_SHIFT_CHV;
+ *pipe = REG_FIELD_GET(DP_PIPE_SEL_MASK_CHV, val);
else
- *pipe = (val & DP_PIPE_SEL_MASK) >> DP_PIPE_SEL_SHIFT;
+ *pipe = REG_FIELD_GET(DP_PIPE_SEL_MASK, val);
return ret;
}
if (display->platform.g4x && tmp & DP_COLOR_RANGE_16_235)
pipe_config->limited_color_range = true;
- pipe_config->lane_count =
- ((tmp & DP_PORT_WIDTH_MASK) >> DP_PORT_WIDTH_SHIFT) + 1;
+ pipe_config->lane_count = REG_FIELD_GET(DP_PORT_WIDTH_MASK, tmp) + 1;
g4x_dp_get_m_n(pipe_config);
if (port == PORT_A) {
- if ((intel_de_read(display, DP_A) & DP_PLL_FREQ_MASK) == DP_PLL_FREQ_162MHZ)
+ if ((intel_de_read(display, DP_A) & EDP_PLL_FREQ_MASK) == EDP_PLL_FREQ_162MHZ)
pipe_config->port_clock = 162000;
else
pipe_config->port_clock = 270000;
#define VLV_DP_B _MMIO(VLV_DISPLAY_BASE + 0x64100)
#define VLV_DP_C _MMIO(VLV_DISPLAY_BASE + 0x64200)
#define CHV_DP_D _MMIO(VLV_DISPLAY_BASE + 0x64300)
-#define DP_PORT_EN (1 << 31)
-#define DP_PIPE_SEL_SHIFT 30
-#define DP_PIPE_SEL_MASK (1 << 30)
-#define DP_PIPE_SEL(pipe) ((pipe) << 30)
-#define DP_PIPE_SEL_SHIFT_IVB 29
-#define DP_PIPE_SEL_MASK_IVB (3 << 29)
-#define DP_PIPE_SEL_IVB(pipe) ((pipe) << 29)
+#define DP_PORT_EN REG_BIT(31)
+#define DP_PIPE_SEL_MASK REG_GENMASK(30, 30)
+#define DP_PIPE_SEL(pipe) REG_FIELD_PREP(DP_PIPE_SEL_MASK, (pipe))
+#define DP_PIPE_SEL_MASK_IVB REG_GENMASK(30, 29)
+#define DP_PIPE_SEL_IVB(pipe) REG_FIELD_PREP(DP_PIPE_SEL_MASK_IVB, (pipe))
#define DP_PIPE_SEL_SHIFT_CHV 16
-#define DP_PIPE_SEL_MASK_CHV (3 << 16)
-#define DP_PIPE_SEL_CHV(pipe) ((pipe) << 16)
-
-/* Link training mode - select a suitable mode for each stage */
-#define DP_LINK_TRAIN_PAT_1 (0 << 28)
-#define DP_LINK_TRAIN_PAT_2 (1 << 28)
-#define DP_LINK_TRAIN_PAT_IDLE (2 << 28)
-#define DP_LINK_TRAIN_OFF (3 << 28)
-#define DP_LINK_TRAIN_MASK (3 << 28)
-#define DP_LINK_TRAIN_SHIFT 28
-
-/* CPT Link training mode */
-#define DP_LINK_TRAIN_PAT_1_CPT (0 << 8)
-#define DP_LINK_TRAIN_PAT_2_CPT (1 << 8)
-#define DP_LINK_TRAIN_PAT_IDLE_CPT (2 << 8)
-#define DP_LINK_TRAIN_OFF_CPT (3 << 8)
-#define DP_LINK_TRAIN_MASK_CPT (7 << 8)
-#define DP_LINK_TRAIN_SHIFT_CPT 8
-
-/* Signal voltages. These are mostly controlled by the other end */
-#define DP_VOLTAGE_0_4 (0 << 25)
-#define DP_VOLTAGE_0_6 (1 << 25)
-#define DP_VOLTAGE_0_8 (2 << 25)
-#define DP_VOLTAGE_1_2 (3 << 25)
-#define DP_VOLTAGE_MASK (7 << 25)
-#define DP_VOLTAGE_SHIFT 25
-
-/* Signal pre-emphasis levels, like voltages, the other end tells us what
- * they want
- */
-#define DP_PRE_EMPHASIS_0 (0 << 22)
-#define DP_PRE_EMPHASIS_3_5 (1 << 22)
-#define DP_PRE_EMPHASIS_6 (2 << 22)
-#define DP_PRE_EMPHASIS_9_5 (3 << 22)
-#define DP_PRE_EMPHASIS_MASK (7 << 22)
-#define DP_PRE_EMPHASIS_SHIFT 22
-
-/* How many wires to use. I guess 3 was too hard */
-#define DP_PORT_WIDTH(width) (((width) - 1) << 19)
-#define DP_PORT_WIDTH_MASK (7 << 19)
-#define DP_PORT_WIDTH_SHIFT 19
-
-/* Mystic DPCD version 1.1 special mode */
-#define DP_ENHANCED_FRAMING (1 << 18)
-
-/* eDP */
-#define DP_PLL_FREQ_270MHZ (0 << 16)
-#define DP_PLL_FREQ_162MHZ (1 << 16)
-#define DP_PLL_FREQ_MASK (3 << 16)
-
-/* locked once port is enabled */
-#define DP_PORT_REVERSAL (1 << 15)
-
-/* eDP */
-#define DP_PLL_ENABLE (1 << 14)
-
-/* sends the clock on lane 15 of the PEG for debug */
-#define DP_CLOCK_OUTPUT_ENABLE (1 << 13)
-
-#define DP_SCRAMBLING_DISABLE (1 << 12)
-#define DP_SCRAMBLING_DISABLE_IRONLAKE (1 << 7)
-
-/* limit RGB values to avoid confusing TVs */
-#define DP_COLOR_RANGE_16_235 (1 << 8)
-
-/* Turn on the audio link */
-#define DP_AUDIO_OUTPUT_ENABLE (1 << 6)
-
-/* vs and hs sync polarity */
-#define DP_SYNC_VS_HIGH (1 << 4)
-#define DP_SYNC_HS_HIGH (1 << 3)
-
-/* A fantasy */
-#define DP_DETECTED (1 << 2)
+#define DP_PIPE_SEL_MASK_CHV REG_GENMASK(17, 16)
+#define DP_PIPE_SEL_CHV(pipe) REG_FIELD_PREP(DP_PIPE_SEL_MASK_CHV, (pipe))
+#define DP_LINK_TRAIN_MASK REG_GENMASK(29, 28)
+#define DP_LINK_TRAIN_PAT_1 REG_FIELD_PREP(DP_LINK_TRAIN_MASK, 0)
+#define DP_LINK_TRAIN_PAT_2 REG_FIELD_PREP(DP_LINK_TRAIN_MASK, 1)
+#define DP_LINK_TRAIN_PAT_IDLE REG_FIELD_PREP(DP_LINK_TRAIN_MASK, 2)
+#define DP_LINK_TRAIN_OFF REG_FIELD_PREP(DP_LINK_TRAIN_MASK, 3)
+#define DP_LINK_TRAIN_MASK_CPT REG_GENMASK(10, 8)
+#define DP_LINK_TRAIN_PAT_1_CPT REG_FIELD_PREP(DP_LINK_TRAIN_MASK_CPT, 0)
+#define DP_LINK_TRAIN_PAT_2_CPT REG_FIELD_PREP(DP_LINK_TRAIN_MASK_CPT, 1)
+#define DP_LINK_TRAIN_PAT_IDLE_CPT REG_FIELD_PREP(DP_LINK_TRAIN_MASK_CPT, 2)
+#define DP_LINK_TRAIN_OFF_CPT REG_FIELD_PREP(DP_LINK_TRAIN_MASK_CPT, 3)
+#define DP_VOLTAGE_MASK REG_GENMASK(27, 25)
+#define DP_VOLTAGE_0_4 REG_FIELD_PREP(DP_VOLTAGE_MASK, 0)
+#define DP_VOLTAGE_0_6 REG_FIELD_PREP(DP_VOLTAGE_MASK, 1)
+#define DP_VOLTAGE_0_8 REG_FIELD_PREP(DP_VOLTAGE_MASK, 2)
+#define DP_VOLTAGE_1_2 REG_FIELD_PREP(DP_VOLTAGE_MASK, 3)
+#define DP_PRE_EMPHASIS_MASK REG_GENMASK(24, 22)
+#define DP_PRE_EMPHASIS_0 REG_FIELD_PREP(DP_PRE_EMPHASIS_MASK, 0)
+#define DP_PRE_EMPHASIS_3_5 REG_FIELD_PREP(DP_PRE_EMPHASIS_MASK, 1)
+#define DP_PRE_EMPHASIS_6 REG_FIELD_PREP(DP_PRE_EMPHASIS_MASK, 2)
+#define DP_PRE_EMPHASIS_9_5 REG_FIELD_PREP(DP_PRE_EMPHASIS_MASK, 3)
+#define DP_PORT_WIDTH_MASK REG_GENMASK(21, 19)
+#define DP_PORT_WIDTH(width) REG_FIELD_PREP(DP_PORT_WIDTH_MASK, (width) - 1)
+#define DP_ENHANCED_FRAMING REG_BIT(18)
+#define EDP_PLL_FREQ_MASK REG_GENMASK(17, 16)
+#define EDP_PLL_FREQ_270MHZ REG_FIELD_PREP(EDP_PLL_FREQ_MASK, 0)
+#define EDP_PLL_FREQ_162MHZ REG_FIELD_PREP(EDP_PLL_FREQ_MASK, 1)
+#define DP_PORT_REVERSAL REG_BIT(15)
+#define EDP_PLL_ENABLE REG_BIT(14)
+#define DP_CLOCK_OUTPUT_ENABLE REG_BIT(13)
+#define DP_SCRAMBLING_DISABLE REG_BIT(12)
+#define DP_SCRAMBLING_DISABLE_ILK REG_BIT(7)
+#define DP_COLOR_RANGE_16_235 REG_BIT(8)
+#define DP_AUDIO_OUTPUT_ENABLE REG_BIT(6)
+#define DP_SYNC_VS_HIGH REG_BIT(4)
+#define DP_SYNC_HS_HIGH REG_BIT(3)
+#define DP_DETECTED REG_BIT(2)
/*
* Computing GMCH M and N values for the Display Port link
projects / linux-block.git / commitdiff