[media] adp1653: Add driver for LED flash controller
authorSakari Ailus <sakari.ailus@iki.fi>
Thu, 5 May 2011 18:39:25 +0000 (15:39 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Wed, 27 Jul 2011 20:55:39 +0000 (17:55 -0300)
This patch adds the driver for the adp1653 LED flash controller. This
controller supports a high power led in flash and torch modes and an
indicator light, sometimes also called privacy light.

The adp1653 is used on the Nokia N900.

Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Tuukka Toivonen <tuukkat76@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: David Cohen <dacohen@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/video/Kconfig
drivers/media/video/Makefile
drivers/media/video/adp1653.c [new file with mode: 0644]
include/media/adp1653.h [new file with mode: 0644]

index 2cc9552f6394904ac25ac5a64dff1847a8beb658..b1f7e19640d549b01a1d25af63fcf6d44e44afb0 100644 (file)
@@ -489,6 +489,15 @@ config VIDEO_TCM825X
          This is a driver for the Toshiba TCM825x VGA camera sensor.
          It is used for example in Nokia N800.
 
+comment "Flash devices"
+
+config VIDEO_ADP1653
+       tristate "ADP1653 flash support"
+       depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+       ---help---
+         This is a driver for the ADP1653 flash controller. It is used for
+         example in Nokia N900.
+
 comment "Video improvement chips"
 
 config VIDEO_UPD64031A
index 459db028acef6988364d8e28d43459cbd45ca78f..5138a65f5e10f47b616aaa6f1d5f01cced6fc1ee 100644 (file)
@@ -70,6 +70,7 @@ obj-$(CONFIG_VIDEO_MT9V032) += mt9v032.o
 obj-$(CONFIG_VIDEO_SR030PC30)  += sr030pc30.o
 obj-$(CONFIG_VIDEO_NOON010PC30)        += noon010pc30.o
 obj-$(CONFIG_VIDEO_M5MOLS)     += m5mols/
+obj-$(CONFIG_VIDEO_ADP1653)    += adp1653.o
 
 obj-$(CONFIG_SOC_CAMERA_IMX074)                += imx074.o
 obj-$(CONFIG_SOC_CAMERA_MT9M001)       += mt9m001.o
diff --git a/drivers/media/video/adp1653.c b/drivers/media/video/adp1653.c
new file mode 100644 (file)
index 0000000..be7befd
--- /dev/null
@@ -0,0 +1,491 @@
+/*
+ * drivers/media/video/adp1653.c
+ *
+ * Copyright (C) 2008--2011 Nokia Corporation
+ *
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * Contributors:
+ *     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *     Tuukka Toivonen <tuukkat76@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ * TODO:
+ * - fault interrupt handling
+ * - hardware strobe
+ * - power doesn't need to be ON if all lights are off
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/version.h>
+#include <media/adp1653.h>
+#include <media/v4l2-device.h>
+
+#define TIMEOUT_MAX            820000
+#define TIMEOUT_STEP           54600
+#define TIMEOUT_MIN            (TIMEOUT_MAX - ADP1653_REG_CONFIG_TMR_SET_MAX \
+                                * TIMEOUT_STEP)
+#define TIMEOUT_US_TO_CODE(t)  ((TIMEOUT_MAX + (TIMEOUT_STEP / 2) - (t)) \
+                                / TIMEOUT_STEP)
+#define TIMEOUT_CODE_TO_US(c)  (TIMEOUT_MAX - (c) * TIMEOUT_STEP)
+
+/* Write values into ADP1653 registers. */
+static int adp1653_update_hw(struct adp1653_flash *flash)
+{
+       struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
+       u8 out_sel;
+       u8 config = 0;
+       int rval;
+
+       out_sel = ADP1653_INDICATOR_INTENSITY_uA_TO_REG(
+               flash->indicator_intensity->val)
+               << ADP1653_REG_OUT_SEL_ILED_SHIFT;
+
+       switch (flash->led_mode->val) {
+       case V4L2_FLASH_LED_MODE_NONE:
+               break;
+       case V4L2_FLASH_LED_MODE_FLASH:
+               /* Flash mode, light on with strobe, duration from timer */
+               config = ADP1653_REG_CONFIG_TMR_CFG;
+               config |= TIMEOUT_US_TO_CODE(flash->flash_timeout->val)
+                         << ADP1653_REG_CONFIG_TMR_SET_SHIFT;
+               break;
+       case V4L2_FLASH_LED_MODE_TORCH:
+               /* Torch mode, light immediately on, duration indefinite */
+               out_sel |= ADP1653_FLASH_INTENSITY_mA_TO_REG(
+                       flash->torch_intensity->val)
+                       << ADP1653_REG_OUT_SEL_HPLED_SHIFT;
+               break;
+       }
+
+       rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel);
+       if (rval < 0)
+               return rval;
+
+       rval = i2c_smbus_write_byte_data(client, ADP1653_REG_CONFIG, config);
+       if (rval < 0)
+               return rval;
+
+       return 0;
+}
+
+static int adp1653_get_fault(struct adp1653_flash *flash)
+{
+       struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
+       int fault;
+       int rval;
+
+       fault = i2c_smbus_read_byte_data(client, ADP1653_REG_FAULT);
+       if (IS_ERR_VALUE(fault))
+               return fault;
+
+       flash->fault |= fault;
+
+       if (!flash->fault)
+               return 0;
+
+       /* Clear faults. */
+       rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, 0);
+       if (IS_ERR_VALUE(rval))
+               return rval;
+
+       flash->led_mode->val = V4L2_FLASH_LED_MODE_NONE;
+
+       rval = adp1653_update_hw(flash);
+       if (IS_ERR_VALUE(rval))
+               return rval;
+
+       return flash->fault;
+}
+
+static int adp1653_strobe(struct adp1653_flash *flash, int enable)
+{
+       struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
+       u8 out_sel = ADP1653_INDICATOR_INTENSITY_uA_TO_REG(
+               flash->indicator_intensity->val)
+               << ADP1653_REG_OUT_SEL_ILED_SHIFT;
+       int rval;
+
+       if (flash->led_mode->val != V4L2_FLASH_LED_MODE_FLASH)
+               return -EBUSY;
+
+       if (!enable)
+               return i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL,
+                                                out_sel);
+
+       out_sel |= ADP1653_FLASH_INTENSITY_mA_TO_REG(
+               flash->flash_intensity->val)
+               << ADP1653_REG_OUT_SEL_HPLED_SHIFT;
+       rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel);
+       if (rval)
+               return rval;
+
+       /* Software strobe using i2c */
+       rval = i2c_smbus_write_byte_data(client, ADP1653_REG_SW_STROBE,
+               ADP1653_REG_SW_STROBE_SW_STROBE);
+       if (rval)
+               return rval;
+       return i2c_smbus_write_byte_data(client, ADP1653_REG_SW_STROBE, 0);
+}
+
+/* --------------------------------------------------------------------------
+ * V4L2 controls
+ */
+
+static int adp1653_get_ctrl(struct v4l2_ctrl *ctrl)
+{
+       struct adp1653_flash *flash =
+               container_of(ctrl->handler, struct adp1653_flash, ctrls);
+       int rval;
+
+       rval = adp1653_get_fault(flash);
+       if (IS_ERR_VALUE(rval))
+               return rval;
+
+       ctrl->cur.val = 0;
+
+       if (flash->fault & ADP1653_REG_FAULT_FLT_SCP)
+               ctrl->cur.val |= V4L2_FLASH_FAULT_SHORT_CIRCUIT;
+       if (flash->fault & ADP1653_REG_FAULT_FLT_OT)
+               ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_TEMPERATURE;
+       if (flash->fault & ADP1653_REG_FAULT_FLT_TMR)
+               ctrl->cur.val |= V4L2_FLASH_FAULT_TIMEOUT;
+       if (flash->fault & ADP1653_REG_FAULT_FLT_OV)
+               ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_VOLTAGE;
+
+       flash->fault = 0;
+
+       return 0;
+}
+
+static int adp1653_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+       struct adp1653_flash *flash =
+               container_of(ctrl->handler, struct adp1653_flash, ctrls);
+       int rval;
+
+       rval = adp1653_get_fault(flash);
+       if (IS_ERR_VALUE(rval))
+               return rval;
+       if ((rval & (ADP1653_REG_FAULT_FLT_SCP |
+                    ADP1653_REG_FAULT_FLT_OT |
+                    ADP1653_REG_FAULT_FLT_OV)) &&
+           (ctrl->id == V4L2_CID_FLASH_STROBE ||
+            ctrl->id == V4L2_CID_FLASH_TORCH_INTENSITY ||
+            ctrl->id == V4L2_CID_FLASH_LED_MODE))
+               return -EBUSY;
+
+       switch (ctrl->id) {
+       case V4L2_CID_FLASH_STROBE:
+               return adp1653_strobe(flash, 1);
+       case V4L2_CID_FLASH_STROBE_STOP:
+               return adp1653_strobe(flash, 0);
+       }
+
+       return adp1653_update_hw(flash);
+}
+
+static const struct v4l2_ctrl_ops adp1653_ctrl_ops = {
+       .g_volatile_ctrl = adp1653_get_ctrl,
+       .s_ctrl = adp1653_set_ctrl,
+};
+
+static int adp1653_init_controls(struct adp1653_flash *flash)
+{
+       struct v4l2_ctrl *fault;
+
+       v4l2_ctrl_handler_init(&flash->ctrls, 9);
+
+       flash->led_mode =
+               v4l2_ctrl_new_std_menu(&flash->ctrls, &adp1653_ctrl_ops,
+                                      V4L2_CID_FLASH_LED_MODE,
+                                      V4L2_FLASH_LED_MODE_TORCH, ~0x7, 0);
+       v4l2_ctrl_new_std_menu(&flash->ctrls, &adp1653_ctrl_ops,
+                              V4L2_CID_FLASH_STROBE_SOURCE,
+                              V4L2_FLASH_STROBE_SOURCE_SOFTWARE, ~0x1, 0);
+       v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
+                         V4L2_CID_FLASH_STROBE, 0, 0, 0, 0);
+       v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
+                         V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0);
+       flash->flash_timeout =
+               v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
+                                 V4L2_CID_FLASH_TIMEOUT, TIMEOUT_MIN,
+                                 flash->platform_data->max_flash_timeout,
+                                 TIMEOUT_STEP,
+                                 flash->platform_data->max_flash_timeout);
+       flash->flash_intensity =
+               v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
+                                 V4L2_CID_FLASH_INTENSITY,
+                                 ADP1653_FLASH_INTENSITY_MIN,
+                                 flash->platform_data->max_flash_intensity,
+                                 1, flash->platform_data->max_flash_intensity);
+       flash->torch_intensity =
+               v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
+                                 V4L2_CID_FLASH_TORCH_INTENSITY,
+                                 ADP1653_TORCH_INTENSITY_MIN,
+                                 flash->platform_data->max_torch_intensity,
+                                 ADP1653_FLASH_INTENSITY_STEP,
+                                 flash->platform_data->max_torch_intensity);
+       flash->indicator_intensity =
+               v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
+                                 V4L2_CID_FLASH_INDICATOR_INTENSITY,
+                                 ADP1653_INDICATOR_INTENSITY_MIN,
+                                 flash->platform_data->max_indicator_intensity,
+                                 ADP1653_INDICATOR_INTENSITY_STEP,
+                                 ADP1653_INDICATOR_INTENSITY_MIN);
+       fault = v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
+                                 V4L2_CID_FLASH_FAULT, 0,
+                                 V4L2_FLASH_FAULT_OVER_VOLTAGE
+                                 | V4L2_FLASH_FAULT_OVER_TEMPERATURE
+                                 | V4L2_FLASH_FAULT_SHORT_CIRCUIT, 0, 0);
+
+       if (flash->ctrls.error)
+               return flash->ctrls.error;
+
+       fault->is_volatile = 1;
+
+       flash->subdev.ctrl_handler = &flash->ctrls;
+       return 0;
+}
+
+/* --------------------------------------------------------------------------
+ * V4L2 subdev operations
+ */
+
+static int
+adp1653_init_device(struct adp1653_flash *flash)
+{
+       struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
+       int rval;
+
+       /* Clear FAULT register by writing zero to OUT_SEL */
+       rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, 0);
+       if (rval < 0) {
+               dev_err(&client->dev, "failed writing fault register\n");
+               return -EIO;
+       }
+
+       mutex_lock(&flash->ctrls.lock);
+       /* Reset faults before reading new ones. */
+       flash->fault = 0;
+       rval = adp1653_get_fault(flash);
+       mutex_unlock(&flash->ctrls.lock);
+       if (rval > 0) {
+               dev_err(&client->dev, "faults detected: 0x%1.1x\n", rval);
+               return -EIO;
+       }
+
+       mutex_lock(&flash->ctrls.lock);
+       rval = adp1653_update_hw(flash);
+       mutex_unlock(&flash->ctrls.lock);
+       if (rval) {
+               dev_err(&client->dev,
+                       "adp1653_update_hw failed at %s\n", __func__);
+               return -EIO;
+       }
+
+       return 0;
+}
+
+static int
+__adp1653_set_power(struct adp1653_flash *flash, int on)
+{
+       int ret;
+
+       ret = flash->platform_data->power(&flash->subdev, on);
+       if (ret < 0)
+               return ret;
+
+       if (!on)
+               return 0;
+
+       ret = adp1653_init_device(flash);
+       if (ret < 0)
+               flash->platform_data->power(&flash->subdev, 0);
+
+       return ret;
+}
+
+static int
+adp1653_set_power(struct v4l2_subdev *subdev, int on)
+{
+       struct adp1653_flash *flash = to_adp1653_flash(subdev);
+       int ret = 0;
+
+       mutex_lock(&flash->power_lock);
+
+       /* If the power count is modified from 0 to != 0 or from != 0 to 0,
+        * update the power state.
+        */
+       if (flash->power_count == !on) {
+               ret = __adp1653_set_power(flash, !!on);
+               if (ret < 0)
+                       goto done;
+       }
+
+       /* Update the power count. */
+       flash->power_count += on ? 1 : -1;
+       WARN_ON(flash->power_count < 0);
+
+done:
+       mutex_unlock(&flash->power_lock);
+       return ret;
+}
+
+static int adp1653_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+       return adp1653_set_power(sd, 1);
+}
+
+static int adp1653_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+       return adp1653_set_power(sd, 0);
+}
+
+static const struct v4l2_subdev_core_ops adp1653_core_ops = {
+       .s_power = adp1653_set_power,
+};
+
+static const struct v4l2_subdev_ops adp1653_ops = {
+       .core = &adp1653_core_ops,
+};
+
+static const struct v4l2_subdev_internal_ops adp1653_internal_ops = {
+       .open = adp1653_open,
+       .close = adp1653_close,
+};
+
+/* --------------------------------------------------------------------------
+ * I2C driver
+ */
+#ifdef CONFIG_PM
+
+static int adp1653_suspend(struct device *dev)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+       struct adp1653_flash *flash = to_adp1653_flash(subdev);
+
+       if (!flash->power_count)
+               return 0;
+
+       return __adp1653_set_power(flash, 0);
+}
+
+static int adp1653_resume(struct device *dev)
+{
+       struct i2c_client *client = to_i2c_client(dev);
+       struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+       struct adp1653_flash *flash = to_adp1653_flash(subdev);
+
+       if (!flash->power_count)
+               return 0;
+
+       return __adp1653_set_power(flash, 1);
+}
+
+#else
+
+#define adp1653_suspend        NULL
+#define adp1653_resume NULL
+
+#endif /* CONFIG_PM */
+
+static int adp1653_probe(struct i2c_client *client,
+                        const struct i2c_device_id *devid)
+{
+       struct adp1653_flash *flash;
+       int ret;
+
+       flash = kzalloc(sizeof(*flash), GFP_KERNEL);
+       if (flash == NULL)
+               return -ENOMEM;
+
+       flash->platform_data = client->dev.platform_data;
+
+       mutex_init(&flash->power_lock);
+
+       v4l2_i2c_subdev_init(&flash->subdev, client, &adp1653_ops);
+       flash->subdev.internal_ops = &adp1653_internal_ops;
+       flash->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+       adp1653_init_controls(flash);
+
+       ret = media_entity_init(&flash->subdev.entity, 0, NULL, 0);
+       if (ret < 0)
+               kfree(flash);
+
+       return ret;
+}
+
+static int __exit adp1653_remove(struct i2c_client *client)
+{
+       struct v4l2_subdev *subdev = i2c_get_clientdata(client);
+       struct adp1653_flash *flash = to_adp1653_flash(subdev);
+
+       v4l2_device_unregister_subdev(&flash->subdev);
+       v4l2_ctrl_handler_free(&flash->ctrls);
+       media_entity_cleanup(&flash->subdev.entity);
+       kfree(flash);
+       return 0;
+}
+
+static const struct i2c_device_id adp1653_id_table[] = {
+       { ADP1653_NAME, 0 },
+       { }
+};
+MODULE_DEVICE_TABLE(i2c, adp1653_id_table);
+
+static struct dev_pm_ops adp1653_pm_ops = {
+       .suspend        = adp1653_suspend,
+       .resume         = adp1653_resume,
+};
+
+static struct i2c_driver adp1653_i2c_driver = {
+       .driver         = {
+               .name   = ADP1653_NAME,
+               .pm     = &adp1653_pm_ops,
+       },
+       .probe          = adp1653_probe,
+       .remove         = __exit_p(adp1653_remove),
+       .id_table       = adp1653_id_table,
+};
+
+static int __init adp1653_init(void)
+{
+       int rval;
+
+       rval = i2c_add_driver(&adp1653_i2c_driver);
+       if (rval)
+               printk(KERN_ALERT "%s: failed at i2c_add_driver\n", __func__);
+
+       return rval;
+}
+
+static void __exit adp1653_exit(void)
+{
+       i2c_del_driver(&adp1653_i2c_driver);
+}
+
+module_init(adp1653_init);
+module_exit(adp1653_exit);
+
+MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>");
+MODULE_DESCRIPTION("Analog Devices ADP1653 LED flash driver");
+MODULE_LICENSE("GPL");
diff --git a/include/media/adp1653.h b/include/media/adp1653.h
new file mode 100644 (file)
index 0000000..50a1af8
--- /dev/null
@@ -0,0 +1,126 @@
+/*
+ * include/media/adp1653.h
+ *
+ * Copyright (C) 2008--2011 Nokia Corporation
+ *
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * Contributors:
+ *     Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *     Tuukka Toivonen <tuukkat76@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef ADP1653_H
+#define ADP1653_H
+
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-subdev.h>
+
+#define ADP1653_NAME                           "adp1653"
+#define ADP1653_I2C_ADDR                       (0x60 >> 1)
+
+/* Register definitions */
+#define ADP1653_REG_OUT_SEL                    0x00
+#define ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN    0x01
+#define ADP1653_REG_OUT_SEL_HPLED_TORCH_MAX    0x0b
+#define ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN    0x0c
+#define ADP1653_REG_OUT_SEL_HPLED_FLASH_MAX    0x1f
+#define ADP1653_REG_OUT_SEL_HPLED_SHIFT                3
+#define ADP1653_REG_OUT_SEL_ILED_MAX           0x07
+#define ADP1653_REG_OUT_SEL_ILED_SHIFT         0
+
+#define ADP1653_REG_CONFIG                     0x01
+#define ADP1653_REG_CONFIG_TMR_CFG             (1 << 4)
+#define ADP1653_REG_CONFIG_TMR_SET_MAX         0x0f
+#define ADP1653_REG_CONFIG_TMR_SET_SHIFT       0
+
+#define ADP1653_REG_SW_STROBE                  0x02
+#define ADP1653_REG_SW_STROBE_SW_STROBE                (1 << 0)
+
+#define ADP1653_REG_FAULT                      0x03
+#define ADP1653_REG_FAULT_FLT_SCP              (1 << 3)
+#define ADP1653_REG_FAULT_FLT_OT               (1 << 2)
+#define ADP1653_REG_FAULT_FLT_TMR              (1 << 1)
+#define ADP1653_REG_FAULT_FLT_OV               (1 << 0)
+
+#define ADP1653_INDICATOR_INTENSITY_MIN                0
+#define ADP1653_INDICATOR_INTENSITY_STEP       2500
+#define ADP1653_INDICATOR_INTENSITY_MAX                \
+       (ADP1653_REG_OUT_SEL_ILED_MAX * ADP1653_INDICATOR_INTENSITY_STEP)
+#define ADP1653_INDICATOR_INTENSITY_uA_TO_REG(a) \
+       ((a) / ADP1653_INDICATOR_INTENSITY_STEP)
+#define ADP1653_INDICATOR_INTENSITY_REG_TO_uA(a) \
+       ((a) * ADP1653_INDICATOR_INTENSITY_STEP)
+
+#define ADP1653_FLASH_INTENSITY_BASE           35
+#define ADP1653_FLASH_INTENSITY_STEP           15
+#define ADP1653_FLASH_INTENSITY_MIN                                    \
+       (ADP1653_FLASH_INTENSITY_BASE                                   \
+        + ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN * ADP1653_FLASH_INTENSITY_STEP)
+#define ADP1653_FLASH_INTENSITY_MAX                    \
+       (ADP1653_FLASH_INTENSITY_MIN +                  \
+        (ADP1653_REG_OUT_SEL_HPLED_FLASH_MAX -         \
+         ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN + 1) *    \
+        ADP1653_FLASH_INTENSITY_STEP)
+
+#define ADP1653_FLASH_INTENSITY_mA_TO_REG(a)                           \
+       ((a) < ADP1653_FLASH_INTENSITY_BASE ? 0 :                       \
+        (((a) - ADP1653_FLASH_INTENSITY_BASE) / ADP1653_FLASH_INTENSITY_STEP))
+#define ADP1653_FLASH_INTENSITY_REG_TO_mA(a)           \
+       ((a) * ADP1653_FLASH_INTENSITY_STEP + ADP1653_FLASH_INTENSITY_BASE)
+
+#define ADP1653_TORCH_INTENSITY_MIN                                    \
+       (ADP1653_FLASH_INTENSITY_BASE                                   \
+        + ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN * ADP1653_FLASH_INTENSITY_STEP)
+#define ADP1653_TORCH_INTENSITY_MAX                    \
+       (ADP1653_TORCH_INTENSITY_MIN +                  \
+        (ADP1653_REG_OUT_SEL_HPLED_TORCH_MAX -         \
+         ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN + 1) *    \
+        ADP1653_FLASH_INTENSITY_STEP)
+
+struct adp1653_platform_data {
+       int (*power)(struct v4l2_subdev *sd, int on);
+
+       u32 max_flash_timeout;          /* flash light timeout in us */
+       u32 max_flash_intensity;        /* led intensity, flash mode */
+       u32 max_torch_intensity;        /* led intensity, torch mode */
+       u32 max_indicator_intensity;    /* indicator led intensity */
+};
+
+#define to_adp1653_flash(sd)   container_of(sd, struct adp1653_flash, subdev)
+
+struct adp1653_flash {
+       struct v4l2_subdev subdev;
+       struct adp1653_platform_data *platform_data;
+
+       struct v4l2_ctrl_handler ctrls;
+       struct v4l2_ctrl *led_mode;
+       struct v4l2_ctrl *flash_timeout;
+       struct v4l2_ctrl *flash_intensity;
+       struct v4l2_ctrl *torch_intensity;
+       struct v4l2_ctrl *indicator_intensity;
+
+       struct mutex power_lock;
+       int power_count;
+       int fault;
+};
+
+#endif /* ADP1653_H */