net: phy: broadcom: Avoid forward for bcm54xx_config_clock_delay()

Avoid a forward declaration by moving the callers of
bcm54xx_config_clock_delay() below its body.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 0472b3470c59ab58da037281aac426ca873d5bea..4142f69c15305b945cbce33f8d7450e5cb48fdcf 100644 (file)
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -26,44 +26,6 @@ MODULE_DESCRIPTION("Broadcom PHY driver");
 MODULE_AUTHOR("Maciej W. Rozycki");
 MODULE_LICENSE("GPL");
 
-static int bcm54xx_config_clock_delay(struct phy_device *phydev);
-
-static int bcm54210e_config_init(struct phy_device *phydev)
-{
-       int val;
-
-       bcm54xx_config_clock_delay(phydev);
-
-       if (phydev->dev_flags & PHY_BRCM_EN_MASTER_MODE) {
-               val = phy_read(phydev, MII_CTRL1000);
-               val |= CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER;
-               phy_write(phydev, MII_CTRL1000, val);
-       }
-
-       return 0;
-}
-
-static int bcm54612e_config_init(struct phy_device *phydev)
-{
-       int reg;
-
-       bcm54xx_config_clock_delay(phydev);
-
-       /* Enable CLK125 MUX on LED4 if ref clock is enabled. */
-       if (!(phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED)) {
-               int err;
-
-               reg = bcm_phy_read_exp(phydev, BCM54612E_EXP_SPARE0);
-               err = bcm_phy_write_exp(phydev, BCM54612E_EXP_SPARE0,
-                                       BCM54612E_LED4_CLK125OUT_EN | reg);
-
-               if (err < 0)
-                       return err;
-       }
-
-       return 0;
-}
-
 static int bcm54xx_config_clock_delay(struct phy_device *phydev)
 {
        int rc, val;
@@ -105,6 +67,42 @@ static int bcm54xx_config_clock_delay(struct phy_device *phydev)
        return 0;
 }
 
+static int bcm54210e_config_init(struct phy_device *phydev)
+{
+       int val;
+
+       bcm54xx_config_clock_delay(phydev);
+
+       if (phydev->dev_flags & PHY_BRCM_EN_MASTER_MODE) {
+               val = phy_read(phydev, MII_CTRL1000);
+               val |= CTL1000_AS_MASTER | CTL1000_ENABLE_MASTER;
+               phy_write(phydev, MII_CTRL1000, val);
+       }
+
+       return 0;
+}
+
+static int bcm54612e_config_init(struct phy_device *phydev)
+{
+       int reg;
+
+       bcm54xx_config_clock_delay(phydev);
+
+       /* Enable CLK125 MUX on LED4 if ref clock is enabled. */
+       if (!(phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED)) {
+               int err;
+
+               reg = bcm_phy_read_exp(phydev, BCM54612E_EXP_SPARE0);
+               err = bcm_phy_write_exp(phydev, BCM54612E_EXP_SPARE0,
+                                       BCM54612E_LED4_CLK125OUT_EN | reg);
+
+               if (err < 0)
+                       return err;
+       }
+
+       return 0;
+}
+
 /* Needs SMDSP clock enabled via bcm54xx_phydsp_config() */
 static int bcm50610_a0_workaround(struct phy_device *phydev)
 {