mlxsw: switchx2: Fix port speed configuration
authorElad Raz <eladr@mellanox.com>
Fri, 28 Oct 2016 19:35:51 +0000 (21:35 +0200)
committerDavid S. Miller <davem@davemloft.net>
Sun, 30 Oct 2016 20:50:17 +0000 (16:50 -0400)
In SwitchX-2 we configure the port speed to negotiate with 40G link only.
Add support for all other supported speeds.

Fixes: 31557f0f9755 ("mlxsw: Introduce Mellanox SwitchX-2 ASIC support")
Signed-off-by: Elad Raz <eladr@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/mellanox/mlxsw/switchx2.c

index 941393b000c802f6493896de066f0c0a24d98697..44dae8da4ef533c6cc799791718f7045849147e1 100644 (file)
@@ -662,6 +662,7 @@ static const struct mlxsw_sx_port_link_mode mlxsw_sx_port_link_mode[] = {
 };
 
 #define MLXSW_SX_PORT_LINK_MODE_LEN ARRAY_SIZE(mlxsw_sx_port_link_mode)
+#define MLXSW_SX_PORT_BASE_SPEED 10000 /* Mb/s */
 
 static u32 mlxsw_sx_from_ptys_supported_port(u32 ptys_eth_proto)
 {
@@ -809,6 +810,18 @@ static u32 mlxsw_sx_to_ptys_speed(u32 speed)
        return ptys_proto;
 }
 
+static u32 mlxsw_sx_to_ptys_upper_speed(u32 upper_speed)
+{
+       u32 ptys_proto = 0;
+       int i;
+
+       for (i = 0; i < MLXSW_SX_PORT_LINK_MODE_LEN; i++) {
+               if (mlxsw_sx_port_link_mode[i].speed <= upper_speed)
+                       ptys_proto |= mlxsw_sx_port_link_mode[i].mask;
+       }
+       return ptys_proto;
+}
+
 static int mlxsw_sx_port_set_settings(struct net_device *dev,
                                      struct ethtool_cmd *cmd)
 {
@@ -955,13 +968,17 @@ static int mlxsw_sx_port_stp_state_set(struct mlxsw_sx_port *mlxsw_sx_port,
        return err;
 }
 
-static int mlxsw_sx_port_speed_set(struct mlxsw_sx_port *mlxsw_sx_port,
-                                  u32 speed)
+static int
+mlxsw_sx_port_speed_by_width_set(struct mlxsw_sx_port *mlxsw_sx_port, u8 width)
 {
        struct mlxsw_sx *mlxsw_sx = mlxsw_sx_port->mlxsw_sx;
+       u32 upper_speed = MLXSW_SX_PORT_BASE_SPEED * width;
        char ptys_pl[MLXSW_REG_PTYS_LEN];
+       u32 eth_proto_admin;
 
-       mlxsw_reg_ptys_pack(ptys_pl, mlxsw_sx_port->local_port, speed);
+       eth_proto_admin = mlxsw_sx_to_ptys_upper_speed(upper_speed);
+       mlxsw_reg_ptys_pack(ptys_pl, mlxsw_sx_port->local_port,
+                           eth_proto_admin);
        return mlxsw_reg_write(mlxsw_sx->core, MLXSW_REG(ptys), ptys_pl);
 }
 
@@ -977,7 +994,7 @@ mlxsw_sx_port_mac_learning_mode_set(struct mlxsw_sx_port *mlxsw_sx_port,
 }
 
 static int mlxsw_sx_port_create(struct mlxsw_sx *mlxsw_sx, u8 local_port,
-                               u8 module)
+                               u8 module, u8 width)
 {
        struct mlxsw_sx_port *mlxsw_sx_port;
        struct net_device *dev;
@@ -1038,8 +1055,7 @@ static int mlxsw_sx_port_create(struct mlxsw_sx *mlxsw_sx, u8 local_port,
                goto err_port_swid_set;
        }
 
-       err = mlxsw_sx_port_speed_set(mlxsw_sx_port,
-                                     MLXSW_REG_PTYS_ETH_SPEED_40GBASE_CR4);
+       err = mlxsw_sx_port_speed_by_width_set(mlxsw_sx_port, width);
        if (err) {
                dev_err(mlxsw_sx->bus_info->dev, "Port %d: Failed to set speed\n",
                        mlxsw_sx_port->local_port);
@@ -1156,7 +1172,7 @@ static int mlxsw_sx_ports_create(struct mlxsw_sx *mlxsw_sx)
                        goto err_port_module_info_get;
                if (!width)
                        continue;
-               err = mlxsw_sx_port_create(mlxsw_sx, i, module);
+               err = mlxsw_sx_port_create(mlxsw_sx, i, module, width);
                if (err)
                        goto err_port_create;
        }