# of AMDSOC/AMDGPU drm driver.
# It provides the HW control for ACP related functionalities.
-subdir-ccflags-y += -I$(AMDACPPATH)/ -I$(AMDACPPATH)/include
-
AMD_ACP_FILES := $(AMDACPPATH)/acp_hw.o
for (; i >= 0; i--)
drm_free_large(p->chunks[i].kdata);
kfree(p->chunks);
+ p->chunks = NULL;
+ p->nchunks = 0;
put_ctx:
amdgpu_ctx_put(p->ctx);
free_chunk:
use_bank = 0;
}
- *pos &= 0x3FFFF;
+ *pos &= (1UL << 22) - 1;
if (use_bank) {
if ((sh_bank != 0xFFFFFFFF && sh_bank >= adev->gfx.config.max_sh_per_se) ||
use_bank = 0;
}
- *pos &= 0x3FFFF;
+ *pos &= (1UL << 22) - 1;
if (use_bank) {
if ((sh_bank != 0xFFFFFFFF && sh_bank >= adev->gfx.config.max_sh_per_se) ||
(adev->pdev->device == 0x6667)) {
max_sclk = 75000;
}
+ } else if (adev->asic_type == CHIP_OLAND) {
+ if ((adev->pdev->device == 0x6604) &&
+ (adev->pdev->subsystem_vendor == 0x1028) &&
+ (adev->pdev->subsystem_device == 0x066F)) {
+ max_sclk = 75000;
+ }
}
if (rps->vce_active) {
/* rev0 hardware requires workarounds to support PG */
adev->pg_flags = 0;
if (adev->rev_id != 0x00) {
- adev->pg_flags |= AMD_PG_SUPPORT_GFX_PG |
+ adev->pg_flags |=
AMD_PG_SUPPORT_GFX_SMG |
AMD_PG_SUPPORT_GFX_PIPELINE |
AMD_PG_SUPPORT_CP |
if (bgate) {
cgs_set_powergating_state(hwmgr->device,
AMD_IP_BLOCK_TYPE_VCE,
- AMD_PG_STATE_UNGATE);
+ AMD_PG_STATE_GATE);
cgs_set_clockgating_state(hwmgr->device,
AMD_IP_BLOCK_TYPE_VCE,
AMD_CG_STATE_GATE);
clk_prepare_enable(hwdev->pxlclk);
- /* mclk needs to be set to the same or higher rate than pxlclk */
- clk_set_rate(hwdev->mclk, crtc->state->adjusted_mode.crtc_clock * 1000);
+ /* We rely on firmware to set mclk to a sensible level. */
clk_set_rate(hwdev->pxlclk, crtc->state->adjusted_mode.crtc_clock * 1000);
hwdev->modeset(hwdev, &vm);
{ DE_VIDEO1, MALIDP550_DE_LV1_BASE, MALIDP550_DE_LV1_PTR_BASE, MALIDP_DE_LV_STRIDE0 },
{ DE_GRAPHICS1, MALIDP550_DE_LG_BASE, MALIDP550_DE_LG_PTR_BASE, MALIDP_DE_LG_STRIDE },
{ DE_VIDEO2, MALIDP550_DE_LV2_BASE, MALIDP550_DE_LV2_PTR_BASE, MALIDP_DE_LV_STRIDE0 },
- { DE_SMART, MALIDP550_DE_LS_BASE, MALIDP550_DE_LS_PTR_BASE, 0 },
+ { DE_SMART, MALIDP550_DE_LS_BASE, MALIDP550_DE_LS_PTR_BASE, MALIDP550_DE_LS_R1_STRIDE },
};
#define MALIDP_DE_DEFAULT_PREFETCH_START 5
#define LAYER_V_VAL(x) (((x) & 0x1fff) << 16)
#define MALIDP_LAYER_COMP_SIZE 0x010
#define MALIDP_LAYER_OFFSET 0x014
+#define MALIDP550_LS_ENABLE 0x01c
+#define MALIDP550_LS_R1_IN_SIZE 0x020
/*
* This 4-entry look-up-table is used to determine the full 8-bit alpha value
LAYER_V_VAL(plane->state->crtc_y),
mp->layer->base + MALIDP_LAYER_OFFSET);
+ if (mp->layer->id == DE_SMART)
+ malidp_hw_write(mp->hwdev,
+ LAYER_H_VAL(src_w) | LAYER_V_VAL(src_h),
+ mp->layer->base + MALIDP550_LS_R1_IN_SIZE);
+
/* first clear the rotation bits */
val = malidp_hw_read(mp->hwdev, mp->layer->base + MALIDP_LAYER_CONTROL);
val &= ~LAYER_ROT_MASK;
plane->hwdev = malidp->dev;
plane->layer = &map->layers[i];
- /* Skip the features which the SMART layer doesn't have */
- if (id == DE_SMART)
+ if (id == DE_SMART) {
+ /*
+ * Enable the first rectangle in the SMART layer to be
+ * able to use it as a drm plane.
+ */
+ malidp_hw_write(malidp->dev, 1,
+ plane->layer->base + MALIDP550_LS_ENABLE);
+ /* Skip the features which the SMART layer doesn't have. */
continue;
+ }
drm_plane_create_rotation_property(&plane->base, DRM_ROTATE_0, flags);
malidp_hw_write(malidp->dev, MALIDP_ALPHA_LUT,
/* Stride register offsets relative to Lx_BASE */
#define MALIDP_DE_LG_STRIDE 0x18
#define MALIDP_DE_LV_STRIDE0 0x18
+#define MALIDP550_DE_LS_R1_STRIDE 0x28
/* macros to set values into registers */
#define MALIDP_DE_H_FRONTPORCH(x) (((x) & 0xfff) << 0)
PLANE_PRIMARY,
PLANE_SPRITE0,
PLANE_SPRITE1,
+ PLANE_SPRITE2,
PLANE_CURSOR,
I915_MAX_PLANES,
};
trace_i915_gem_object_pwrite(obj, args->offset, args->size);
+ ret = -ENODEV;
+ if (obj->ops->pwrite)
+ ret = obj->ops->pwrite(obj, args);
+ if (ret != -ENODEV)
+ goto err;
+
ret = i915_gem_object_wait(obj,
I915_WAIT_INTERRUPTIBLE |
I915_WAIT_ALL,
*/
shmem_truncate_range(file_inode(obj->base.filp), 0, (loff_t)-1);
obj->mm.madv = __I915_MADV_PURGED;
+ obj->mm.pages = ERR_PTR(-EFAULT);
}
/* Try to discard unwanted pages */
__i915_gem_object_reset_page_iter(obj);
- obj->ops->put_pages(obj, pages);
+ if (!IS_ERR(pages))
+ obj->ops->put_pages(obj, pages);
+
unlock:
mutex_unlock(&obj->mm.lock);
}
if (err)
return err;
- if (unlikely(!obj->mm.pages)) {
+ if (unlikely(IS_ERR_OR_NULL(obj->mm.pages))) {
err = ____i915_gem_object_get_pages(obj);
if (err)
goto unlock;
pinned = true;
if (!atomic_inc_not_zero(&obj->mm.pages_pin_count)) {
- if (unlikely(!obj->mm.pages)) {
+ if (unlikely(IS_ERR_OR_NULL(obj->mm.pages))) {
ret = ____i915_gem_object_get_pages(obj);
if (ret)
goto err_unlock;
goto out_unlock;
}
+static int
+i915_gem_object_pwrite_gtt(struct drm_i915_gem_object *obj,
+ const struct drm_i915_gem_pwrite *arg)
+{
+ struct address_space *mapping = obj->base.filp->f_mapping;
+ char __user *user_data = u64_to_user_ptr(arg->data_ptr);
+ u64 remain, offset;
+ unsigned int pg;
+
+ /* Before we instantiate/pin the backing store for our use, we
+ * can prepopulate the shmemfs filp efficiently using a write into
+ * the pagecache. We avoid the penalty of instantiating all the
+ * pages, important if the user is just writing to a few and never
+ * uses the object on the GPU, and using a direct write into shmemfs
+ * allows it to avoid the cost of retrieving a page (either swapin
+ * or clearing-before-use) before it is overwritten.
+ */
+ if (READ_ONCE(obj->mm.pages))
+ return -ENODEV;
+
+ /* Before the pages are instantiated the object is treated as being
+ * in the CPU domain. The pages will be clflushed as required before
+ * use, and we can freely write into the pages directly. If userspace
+ * races pwrite with any other operation; corruption will ensue -
+ * that is userspace's prerogative!
+ */
+
+ remain = arg->size;
+ offset = arg->offset;
+ pg = offset_in_page(offset);
+
+ do {
+ unsigned int len, unwritten;
+ struct page *page;
+ void *data, *vaddr;
+ int err;
+
+ len = PAGE_SIZE - pg;
+ if (len > remain)
+ len = remain;
+
+ err = pagecache_write_begin(obj->base.filp, mapping,
+ offset, len, 0,
+ &page, &data);
+ if (err < 0)
+ return err;
+
+ vaddr = kmap(page);
+ unwritten = copy_from_user(vaddr + pg, user_data, len);
+ kunmap(page);
+
+ err = pagecache_write_end(obj->base.filp, mapping,
+ offset, len, len - unwritten,
+ page, data);
+ if (err < 0)
+ return err;
+
+ if (unwritten)
+ return -EFAULT;
+
+ remain -= len;
+ user_data += len;
+ offset += len;
+ pg = 0;
+ } while (remain);
+
+ return 0;
+}
+
static bool ban_context(const struct i915_gem_context *ctx)
{
return (i915_gem_context_is_bannable(ctx) &&
args->timeout_ns -= ktime_to_ns(ktime_sub(ktime_get(), start));
if (args->timeout_ns < 0)
args->timeout_ns = 0;
+
+ /*
+ * Apparently ktime isn't accurate enough and occasionally has a
+ * bit of mismatch in the jiffies<->nsecs<->ktime loop. So patch
+ * things up to make the test happy. We allow up to 1 jiffy.
+ *
+ * This is a regression from the timespec->ktime conversion.
+ */
+ if (ret == -ETIME && !nsecs_to_jiffies(args->timeout_ns))
+ args->timeout_ns = 0;
}
i915_gem_object_put(obj);
static const struct drm_i915_gem_object_ops i915_gem_object_ops = {
.flags = I915_GEM_OBJECT_HAS_STRUCT_PAGE |
I915_GEM_OBJECT_IS_SHRINKABLE,
+
.get_pages = i915_gem_object_get_pages_gtt,
.put_pages = i915_gem_object_put_pages_gtt,
+
+ .pwrite = i915_gem_object_pwrite_gtt,
};
struct drm_i915_gem_object *
* those as well to make room for our guard pages.
*/
if (check_color) {
- if (vma->node.start + vma->node.size == node->start) {
- if (vma->node.color == node->color)
+ if (node->start + node->size == target->start) {
+ if (node->color == target->color)
continue;
}
- if (vma->node.start == node->start + node->size) {
- if (vma->node.color == node->color)
+ if (node->start == target->start + target->size) {
+ if (node->color == target->color)
continue;
}
}
struct sg_table *(*get_pages)(struct drm_i915_gem_object *);
void (*put_pages)(struct drm_i915_gem_object *, struct sg_table *);
+ int (*pwrite)(struct drm_i915_gem_object *,
+ const struct drm_i915_gem_pwrite *);
+
int (*dmabuf_export)(struct drm_i915_gem_object *);
void (*release)(struct drm_i915_gem_object *);
};
return ret;
}
+static void
+i915_vma_remove(struct i915_vma *vma)
+{
+ struct drm_i915_gem_object *obj = vma->obj;
+
+ GEM_BUG_ON(!drm_mm_node_allocated(&vma->node));
+ GEM_BUG_ON(vma->flags & (I915_VMA_GLOBAL_BIND | I915_VMA_LOCAL_BIND));
+
+ drm_mm_remove_node(&vma->node);
+ list_move_tail(&vma->vm_link, &vma->vm->unbound_list);
+
+ /* Since the unbound list is global, only move to that list if
+ * no more VMAs exist.
+ */
+ if (--obj->bind_count == 0)
+ list_move_tail(&obj->global_link,
+ &to_i915(obj->base.dev)->mm.unbound_list);
+
+ /* And finally now the object is completely decoupled from this vma,
+ * we can drop its hold on the backing storage and allow it to be
+ * reaped by the shrinker.
+ */
+ i915_gem_object_unpin_pages(obj);
+ GEM_BUG_ON(atomic_read(&obj->mm.pages_pin_count) < obj->bind_count);
+}
+
int __i915_vma_do_pin(struct i915_vma *vma,
u64 size, u64 alignment, u64 flags)
{
- unsigned int bound = vma->flags;
+ const unsigned int bound = vma->flags;
int ret;
lockdep_assert_held(&vma->vm->i915->drm.struct_mutex);
if (WARN_ON(bound & I915_VMA_PIN_OVERFLOW)) {
ret = -EBUSY;
- goto err;
+ goto err_unpin;
}
if ((bound & I915_VMA_BIND_MASK) == 0) {
ret = i915_vma_insert(vma, size, alignment, flags);
if (ret)
- goto err;
+ goto err_unpin;
}
ret = i915_vma_bind(vma, vma->obj->cache_level, flags);
if (ret)
- goto err;
+ goto err_remove;
if ((bound ^ vma->flags) & I915_VMA_GLOBAL_BIND)
__i915_vma_set_map_and_fenceable(vma);
GEM_BUG_ON(i915_vma_misplaced(vma, size, alignment, flags));
return 0;
-err:
+err_remove:
+ if ((bound & I915_VMA_BIND_MASK) == 0) {
+ GEM_BUG_ON(vma->pages);
+ i915_vma_remove(vma);
+ }
+err_unpin:
__i915_vma_unpin(vma);
return ret;
}
}
vma->flags &= ~(I915_VMA_GLOBAL_BIND | I915_VMA_LOCAL_BIND);
- drm_mm_remove_node(&vma->node);
- list_move_tail(&vma->vm_link, &vma->vm->unbound_list);
-
if (vma->pages != obj->mm.pages) {
GEM_BUG_ON(!vma->pages);
sg_free_table(vma->pages);
}
vma->pages = NULL;
- /* Since the unbound list is global, only move to that list if
- * no more VMAs exist. */
- if (--obj->bind_count == 0)
- list_move_tail(&obj->global_link,
- &to_i915(obj->base.dev)->mm.unbound_list);
-
- /* And finally now the object is completely decoupled from this vma,
- * we can drop its hold on the backing storage and allow it to be
- * reaped by the shrinker.
- */
- i915_gem_object_unpin_pages(obj);
- GEM_BUG_ON(atomic_read(&obj->mm.pages_pin_count) < obj->bind_count);
+ i915_vma_remove(vma);
destroy:
if (unlikely(i915_vma_is_closed(vma)))
/* drm_atomic_helper_update_legacy_modeset_state might not be called. */
crtc->base.mode = crtc->base.state->mode;
- DRM_DEBUG_KMS("Updating pipe size %ix%i -> %ix%i\n",
- old_crtc_state->pipe_src_w, old_crtc_state->pipe_src_h,
- pipe_config->pipe_src_w, pipe_config->pipe_src_h);
-
/*
* Update pipe size and adjust fitter if needed: the reason for this is
* that in compute_mode_changes we check the native mode (not the pfit
struct intel_crtc_scaler_state *scaler_state =
&crtc->config->scaler_state;
- DRM_DEBUG_KMS("for crtc_state = %p\n", crtc->config);
-
if (crtc->config->pch_pfit.enabled) {
int id;
- if (WARN_ON(crtc->config->scaler_state.scaler_id < 0)) {
- DRM_ERROR("Requesting pfit without getting a scaler first\n");
+ if (WARN_ON(crtc->config->scaler_state.scaler_id < 0))
return;
- }
id = scaler_state->scaler_id;
I915_WRITE(SKL_PS_CTRL(pipe, id), PS_SCALER_EN |
PS_FILTER_MEDIUM | scaler_state->scalers[id].mode);
I915_WRITE(SKL_PS_WIN_POS(pipe, id), crtc->config->pch_pfit.pos);
I915_WRITE(SKL_PS_WIN_SZ(pipe, id), crtc->config->pch_pfit.size);
-
- DRM_DEBUG_KMS("for crtc_state = %p scaler_id = %d\n", crtc->config, id);
}
}
} while (progress);
}
+static void intel_atomic_helper_free_state(struct drm_i915_private *dev_priv)
+{
+ struct intel_atomic_state *state, *next;
+ struct llist_node *freed;
+
+ freed = llist_del_all(&dev_priv->atomic_helper.free_list);
+ llist_for_each_entry_safe(state, next, freed, freed)
+ drm_atomic_state_put(&state->base);
+}
+
+static void intel_atomic_helper_free_state_worker(struct work_struct *work)
+{
+ struct drm_i915_private *dev_priv =
+ container_of(work, typeof(*dev_priv), atomic_helper.free_work);
+
+ intel_atomic_helper_free_state(dev_priv);
+}
+
static void intel_atomic_commit_tail(struct drm_atomic_state *state)
{
struct drm_device *dev = state->dev;
* can happen also when the device is completely off.
*/
intel_uncore_arm_unclaimed_mmio_detection(dev_priv);
+
+ intel_atomic_helper_free_state(dev_priv);
}
static void intel_atomic_commit_work(struct work_struct *work)
to_intel_atomic_state(old_crtc_state->state);
bool modeset = needs_modeset(crtc->state);
+ if (!modeset &&
+ (intel_cstate->base.color_mgmt_changed ||
+ intel_cstate->update_pipe)) {
+ intel_color_set_csc(crtc->state);
+ intel_color_load_luts(crtc->state);
+ }
+
/* Perform vblank evasion around commit operation */
intel_pipe_update_start(intel_crtc);
if (modeset)
goto out;
- if (crtc->state->color_mgmt_changed || to_intel_crtc_state(crtc->state)->update_pipe) {
- intel_color_set_csc(crtc->state);
- intel_color_load_luts(crtc->state);
- }
-
if (intel_cstate->update_pipe)
intel_update_pipe_config(intel_crtc, old_intel_cstate);
else if (INTEL_GEN(dev_priv) >= 9)
drm_modeset_acquire_fini(&ctx);
}
-static void intel_atomic_helper_free_state(struct work_struct *work)
-{
- struct drm_i915_private *dev_priv =
- container_of(work, typeof(*dev_priv), atomic_helper.free_work);
- struct intel_atomic_state *state, *next;
- struct llist_node *freed;
-
- freed = llist_del_all(&dev_priv->atomic_helper.free_list);
- llist_for_each_entry_safe(state, next, freed, freed)
- drm_atomic_state_put(&state->base);
-}
-
int intel_modeset_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = to_i915(dev);
dev->mode_config.funcs = &intel_mode_funcs;
INIT_WORK(&dev_priv->atomic_helper.free_work,
- intel_atomic_helper_free_state);
+ intel_atomic_helper_free_state_worker);
intel_init_quirks(dev);
bool *enabled, int width, int height)
{
struct drm_i915_private *dev_priv = to_i915(fb_helper->dev);
- unsigned long conn_configured, mask;
+ unsigned long conn_configured, conn_seq, mask;
unsigned int count = min(fb_helper->connector_count, BITS_PER_LONG);
int i, j;
bool *save_enabled;
bool fallback = true;
int num_connectors_enabled = 0;
int num_connectors_detected = 0;
- int pass = 0;
save_enabled = kcalloc(count, sizeof(bool), GFP_KERNEL);
if (!save_enabled)
mask = BIT(count) - 1;
conn_configured = 0;
retry:
+ conn_seq = conn_configured;
for (i = 0; i < count; i++) {
struct drm_fb_helper_connector *fb_conn;
struct drm_connector *connector;
if (conn_configured & BIT(i))
continue;
- if (pass == 0 && !connector->has_tile)
+ if (conn_seq == 0 && !connector->has_tile)
continue;
if (connector->status == connector_status_connected)
conn_configured |= BIT(i);
}
- if ((conn_configured & mask) != mask) {
- pass++;
+ if ((conn_configured & mask) != mask && conn_configured != conn_seq)
goto retry;
- }
/*
* If the BIOS didn't enable everything it could, fall back to have the
break;
}
+ /* When byt can survive without system hang with dynamic
+ * sw freq adjustments, this restriction can be lifted.
+ */
+ if (IS_VALLEYVIEW(dev_priv))
+ goto skip_hw_write;
+
I915_WRITE(GEN6_RP_UP_EI,
GT_INTERVAL_FROM_US(dev_priv, ei_up));
I915_WRITE(GEN6_RP_UP_THRESHOLD,
GEN6_RP_UP_BUSY_AVG |
GEN6_RP_DOWN_IDLE_AVG);
+skip_hw_write:
dev_priv->rps.power = new_power;
dev_priv->rps.up_threshold = threshold_up;
dev_priv->rps.down_threshold = threshold_down;
* @timeout_base_ms: timeout for polling with preemption enabled
*
* Keep resending the @request to @mbox until PCODE acknowledges it, PCODE
- * reports an error or an overall timeout of @timeout_base_ms+10 ms expires.
+ * reports an error or an overall timeout of @timeout_base_ms+50 ms expires.
* The request is acknowledged once the PCODE reply dword equals @reply after
* applying @reply_mask. Polling is first attempted with preemption enabled
- * for @timeout_base_ms and if this times out for another 10 ms with
+ * for @timeout_base_ms and if this times out for another 50 ms with
* preemption disabled.
*
* Returns 0 on success, %-ETIMEDOUT in case of a timeout, <0 in case of some
* worst case) _and_ PCODE was busy for some reason even after a
* (queued) request and @timeout_base_ms delay. As a workaround retry
* the poll with preemption disabled to maximize the number of
- * requests. Increase the timeout from @timeout_base_ms to 10ms to
+ * requests. Increase the timeout from @timeout_base_ms to 50ms to
* account for interrupts that could reduce the number of these
- * requests.
+ * requests, and for any quirks of the PCODE firmware that delays
+ * the request completion.
*/
DRM_DEBUG_KMS("PCODE timeout, retrying with preemption disabled\n");
WARN_ON_ONCE(timeout_base_ms > 3);
preempt_disable();
- ret = wait_for_atomic(COND, 10);
+ ret = wait_for_atomic(COND, 50);
preempt_enable();
out:
int scaler_id = plane_state->scaler_id;
const struct intel_scaler *scaler;
- DRM_DEBUG_KMS("plane = %d PS_PLANE_SEL(plane) = 0x%x\n",
- plane_id, PS_PLANE_SEL(plane_id));
-
scaler = &crtc_state->scaler_state.scalers[scaler_id];
I915_WRITE(SKL_PS_CTRL(pipe, scaler_id),
for_each_fw_domain_masked(d, fw_domains, dev_priv)
fw_domain_wait_ack(d);
+
+ dev_priv->uncore.fw_domains_active |= fw_domains;
}
static void
fw_domain_put(d);
fw_domain_posting_read(d);
}
+
+ dev_priv->uncore.fw_domains_active &= ~fw_domains;
}
static void
if (WARN_ON(domain->wake_count == 0))
domain->wake_count++;
- if (--domain->wake_count == 0) {
+ if (--domain->wake_count == 0)
dev_priv->uncore.funcs.force_wake_put(dev_priv, domain->mask);
- dev_priv->uncore.fw_domains_active &= ~domain->mask;
- }
spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
fw_domains &= ~domain->mask;
}
- if (fw_domains) {
+ if (fw_domains)
dev_priv->uncore.funcs.force_wake_get(dev_priv, fw_domains);
- dev_priv->uncore.fw_domains_active |= fw_domains;
- }
}
/**
fw_domain_arm_timer(domain);
dev_priv->uncore.funcs.force_wake_get(dev_priv, fw_domains);
- dev_priv->uncore.fw_domains_active |= fw_domains;
}
static inline void __force_wake_auto(struct drm_i915_private *dev_priv,
struct drm_gem_object *obj = buffer->priv;
int ret = 0;
- if (WARN_ON(!obj->filp))
- return -EINVAL;
-
ret = drm_gem_mmap_obj(obj, omap_gem_mmap_size(obj), vma);
if (ret < 0)
return ret;
(rdev->pdev->device == 0x6667)) {
max_sclk = 75000;
}
+ } else if (rdev->family == CHIP_OLAND) {
+ if ((rdev->pdev->device == 0x6604) &&
+ (rdev->pdev->subsystem_vendor == 0x1028) &&
+ (rdev->pdev->subsystem_device == 0x066F)) {
+ max_sclk = 75000;
+ }
}
if (rps->vce_active) {
{
struct drm_device *dev = crtc->dev;
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
+ unsigned long flags;
WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
mutex_lock(&tilcdc_crtc->enable_lock);
tilcdc_write_mask(dev, LCDC_RASTER_CTRL_REG,
LCDC_PALETTE_LOAD_MODE(DATA_ONLY),
LCDC_PALETTE_LOAD_MODE_MASK);
+
+ /* There is no real chance for a race here as the time stamp
+ * is taken before the raster DMA is started. The spin-lock is
+ * taken to have a memory barrier after taking the time-stamp
+ * and to avoid a context switch between taking the stamp and
+ * enabling the raster.
+ */
+ spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
+ tilcdc_crtc->last_vblank = ktime_get();
tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE);
+ spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
drm_crtc_vblank_on(crtc);
}
drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq);
- tilcdc_crtc->last_vblank = 0;
tilcdc_crtc->enabled = false;
mutex_unlock(&tilcdc_crtc->enable_lock);
{
struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc);
struct drm_device *dev = crtc->dev;
- unsigned long flags;
WARN_ON(!drm_modeset_is_locked(&crtc->mutex));
drm_framebuffer_reference(fb);
crtc->primary->fb = fb;
+ tilcdc_crtc->event = event;
- spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
+ mutex_lock(&tilcdc_crtc->enable_lock);
- if (crtc->hwmode.vrefresh && ktime_to_ns(tilcdc_crtc->last_vblank)) {
+ if (tilcdc_crtc->enabled) {
+ unsigned long flags;
ktime_t next_vblank;
s64 tdiff;
- next_vblank = ktime_add_us(tilcdc_crtc->last_vblank,
- 1000000 / crtc->hwmode.vrefresh);
+ spin_lock_irqsave(&tilcdc_crtc->irq_lock, flags);
+ next_vblank = ktime_add_us(tilcdc_crtc->last_vblank,
+ 1000000 / crtc->hwmode.vrefresh);
tdiff = ktime_to_us(ktime_sub(next_vblank, ktime_get()));
if (tdiff < TILCDC_VBLANK_SAFETY_THRESHOLD_US)
tilcdc_crtc->next_fb = fb;
- }
-
- if (tilcdc_crtc->next_fb != fb)
- set_scanout(crtc, fb);
+ else
+ set_scanout(crtc, fb);
- tilcdc_crtc->event = event;
+ spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
+ }
- spin_unlock_irqrestore(&tilcdc_crtc->irq_lock, flags);
+ mutex_unlock(&tilcdc_crtc->enable_lock);
return 0;
}
fail:
tilcdc_crtc_destroy(crtc);
- return -ENOMEM;
+ return ret;
}
#define OMAP_PARAM_CHIPSET_ID 1 /* ie. 0x3430, 0x4430, etc */
struct drm_omap_param {
- uint64_t param; /* in */
- uint64_t value; /* in (set_param), out (get_param) */
+ __u64 param; /* in */
+ __u64 value; /* in (set_param), out (get_param) */
};
#define OMAP_BO_SCANOUT 0x00000001 /* scanout capable (phys contiguous) */
#define OMAP_BO_TILED (OMAP_BO_TILED_8 | OMAP_BO_TILED_16 | OMAP_BO_TILED_32)
union omap_gem_size {
- uint32_t bytes; /* (for non-tiled formats) */
+ __u32 bytes; /* (for non-tiled formats) */
struct {
- uint16_t width;
- uint16_t height;
+ __u16 width;
+ __u16 height;
} tiled; /* (for tiled formats) */
};
struct drm_omap_gem_new {
union omap_gem_size size; /* in */
- uint32_t flags; /* in */
- uint32_t handle; /* out */
- uint32_t __pad;
+ __u32 flags; /* in */
+ __u32 handle; /* out */
+ __u32 __pad;
};
/* mask of operations: */
};
struct drm_omap_gem_cpu_prep {
- uint32_t handle; /* buffer handle (in) */
- uint32_t op; /* mask of omap_gem_op (in) */
+ __u32 handle; /* buffer handle (in) */
+ __u32 op; /* mask of omap_gem_op (in) */
};
struct drm_omap_gem_cpu_fini {
- uint32_t handle; /* buffer handle (in) */
- uint32_t op; /* mask of omap_gem_op (in) */
+ __u32 handle; /* buffer handle (in) */
+ __u32 op; /* mask of omap_gem_op (in) */
/* TODO maybe here we pass down info about what regions are touched
* by sw so we can be clever about cache ops? For now a placeholder,
* set to zero and we just do full buffer flush..
*/
- uint32_t nregions;
- uint32_t __pad;
+ __u32 nregions;
+ __u32 __pad;
};
struct drm_omap_gem_info {
- uint32_t handle; /* buffer handle (in) */
- uint32_t pad;
- uint64_t offset; /* mmap offset (out) */
+ __u32 handle; /* buffer handle (in) */
+ __u32 pad;
+ __u64 offset; /* mmap offset (out) */
/* note: in case of tiled buffers, the user virtual size can be
* different from the physical size (ie. how many pages are needed
* to back the object) which is returned in DRM_IOCTL_GEM_OPEN..
* This size here is the one that should be used if you want to
* mmap() the buffer:
*/
- uint32_t size; /* virtual size for mmap'ing (out) */
- uint32_t __pad;
+ __u32 size; /* virtual size for mmap'ing (out) */
+ __u32 __pad;
};
#define DRM_OMAP_GET_PARAM 0x00
projects / linux-2.6-block.git / commitdiff