dt-bindings: display: panel: convert truly,nt35597.txt to dt-schema

Convert the Truly NT35597 2K display panel bindings to dt-schema.

The vdispp-supply & vdispn-supply are not marked as required since
in practice they are not defined in sdm845-mtp.dts which is the
only used of these bindings.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250507-topic-misc-truly-nt35597-yaml-v1-1-bc719ad8dfff@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250507-topic-misc-truly-nt35597-yaml-v1-1-bc719ad8dfff@linaro.org

diff --git a/Documentation/devicetree/bindings/display/panel/truly,nt35597-2K-display.yaml b/Documentation/devicetree/bindings/display/panel/truly,nt35597-2K-display.yaml
new file mode 100644 (file)
index 0000000..36be09c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/truly,nt35597-2K-display.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/truly,nt35597-2K-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Truly NT35597 DSI 2K display
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+  Truly NT35597 DSI 2K display is used on the Qualcomm SDM845 MTP board.
+
+allOf:
+  - $ref: panel-common-dual.yaml#
+
+properties:
+  compatible:
+    const: truly,nt35597-2K-display
+
+  reg:
+    maxItems: 1
+
+  vdda-supply:
+    description: regulator that provides the supply voltage Power IC supply
+
+  vdispp-supply:
+    description: regulator that provides the supply voltage for positive LCD bias
+
+  vdispn-supply:
+    description: regulator that provides the supply voltage for negative LCD bias
+
+  reset-gpios: true
+
+  mode-gpios:
+    description:
+      Gpio for choosing the mode of the display for single DSI or Dual DSI.
+      This should be low for dual DSI and high for single DSI mode.
+
+  ports:
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - vdda-supply
+  - reset-gpios
+  - mode-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "truly,nt35597-2K-display";
+            reg = <0>;
+
+            vdda-supply = <&pm8998_l14>;
+            vdispp-supply = <&lab_regulator>;
+            vdispn-supply = <&ibb_regulator>;
+
+            reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+            mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    panel0_in: endpoint {
+                        remote-endpoint = <&dsi0_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    panel1_in: endpoint {
+                        remote-endpoint = <&dsi1_out>;
+                    };
+                };
+            };
+        };
+    };
+...

diff --git a/Documentation/devicetree/bindings/display/truly,nt35597.txt b/Documentation/devicetree/bindings/display/truly,nt35597.txt
deleted file mode 100644 (file)
index f39c77e..0000000
--- a/Documentation/devicetree/bindings/display/truly,nt35597.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-Truly model NT35597 DSI display driver
-
-The Truly NT35597 is a generic display driver, currently only configured
-for use in the 2K display on the Qualcomm SDM845 MTP board.
-
-Required properties:
-- compatible: should be "truly,nt35597-2K-display"
-- vdda-supply: phandle of the regulator that provides the supply voltage
-  Power IC supply
-- vdispp-supply: phandle of the regulator that provides the supply voltage
-  for positive LCD bias
-- vdispn-supply: phandle of the regulator that provides the supply voltage
-  for negative LCD bias
-- reset-gpios: phandle of gpio for reset line
-  This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
-  (active low)
-- mode-gpios: phandle of the gpio for choosing the mode of the display
-  for single DSI or Dual DSI
-  This should be low for dual DSI and high for single DSI mode
-- ports: This device has two video ports driven by two DSIs. Their connections
-  are modeled using the OF graph bindings specified in
-  Documentation/devicetree/bindings/graph.txt.
-  - port@0: DSI input port driven by master DSI
-  - port@1: DSI input port driven by secondary DSI
-
-Example:
-
-       dsi@ae94000 {
-               panel@0 {
-                       compatible = "truly,nt35597-2K-display";
-                       reg = <0>;
-                       vdda-supply = <&pm8998_l14>;
-                       vdispp-supply = <&lab_regulator>;
-                       vdispn-supply = <&ibb_regulator>;
-                       pinctrl-names = "default", "suspend";
-                       pinctrl-0 = <&dpu_dsi_active>;
-                       pinctrl-1 = <&dpu_dsi_suspend>;
-
-                       reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
-                       mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
-                       ports {
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               port@0 {
-                                       reg = <0>;
-                                       panel0_in: endpoint {
-                                               remote-endpoint = <&dsi0_out>;
-                                       };
-                               };
-
-                               port@1 {
-                                       reg = <1>;
-                                       panel1_in: endpoint {
-                                               remote-endpoint = <&dsi1_out>;
-                                       };
-                               };
-                       };
-               };
-       };